IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Preparation guidelines and minimum thicknesses
Veneer preparation (dimensions in mm)
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Preparation guidelines and minimum thicknesses
Partial crown preparation (dimensions in mm)
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Preparation guidelines and minimum thicknesses
Crown preparation (dimensions in mm)
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD – Staining technique
Crown on tooth 37 should be replaced IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Preparation
Preparation according to the preparation guidelines. Observe minimum thicknesses. IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Intra-oral imaging
Intra-oral imaging and subsequent CAD/CAM process with the CEREC速 3 System. IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Finishing
Smooth out attachment points and finish the restoration with suitable grinding instruments. Observe minimum thicknesses and contact points. IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Try-in in blue state. Fixation with the Try-In pastes. Check the occlusion and articulation and adjust, if required. Grinding adjustments must be done in the „blue“ state prior to the crystallization IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Preparation for Combination firing
Two auxiliary firing pastes are available, i.e. IPS Object Fix Flow and Putty. Putty is rather suitable for full crowns. The Flow version is suitable for veneers and partial crowns. IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Preparation for Combination firing
Select the largest possible IPS e.max CAD Crystallization Pin
This IPS e.max CAD Crystallization Pin is too small and thus unsuitable
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Preparation for Combination firing
Fill the restoration with PS Object Fix Putty auxiliary firing paste and press the Crystallization Pin deeply into the paste. IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Preparation for Combination firing
Smooth out forced out auxiliary firing paste using a plastic spatula (OptraSculpt) so that the pin is securely in place. Make sure that the external surfaces of the restoration are not contaminated IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Preparation for Combination firing
Remove any contamination from the outer surface of the crown using a brush dampened with water and dry. IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Combination firing - IPS e.max CAD Crystall./Glaze
2 possibilities for characterization/glazing Variant 1 - Paste: Apply the glaze paste on the “blue” restoration Apply Shades and Stains into the unfired paste
Variant 2 - Spray: Apply Shades/Stains directly on the “blue” restoration Fix with Glaze Spray IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Characterization Guide
Slight characterizations on the buccal surface with IPS e.max CAD Crystall./Shade Incisal and Stains.
Occlusal characterizations with IPS e.max CAD Crystall./Shades and Stains.
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Characterization Guide
Too thick layer of IPS e.max CAD Crystall./Shades and Stains.
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Variante A – Paste Glaze
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Variant A - Glaze Paste
Apply IPS e.max Crystall./Glaze Paste evenly directly on the „blue“ restoration… IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Variant A - Glaze Paste
‌ and apply mixed IPS e.max CAD Crystall./Shades and Stains directly into the unfired Glaze Paste. IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Variante B – Spray Glaze
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Variant B - Glaze Spray
Apply mixed IPS e.max CAD Crystall./Shades and Stains directly on the blue restoration‌ IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Variant B - Glaze Spray
c 10
m
‌ and spray an even layer Shake of IPS e.max Crystall./Glaze Spray on the restoration. Shake well before use and between the individual bursts. IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Variant B - Glaze Spray
Spray the IPS e.max CAD Crystall./Glaze Spray directly on the unfired Crystall./Shades and Stains. Spray the restoration from all sides while simultaneously rotating it. Shake well between the individual bursts. IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Optional: Adjustments ďƒ˜ for minor adjustments (e.g. proximal contact points) ďƒ˜ for adjustments both in the combination firing or in a separate corrective firing
Application of the mixed Add-On material on the blue restoration before crystallization
Application of the mixed Add-On material on the crystallized restoration
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Combination firing (crystallization / Glaze firing)
Place the restoration near the center of the Crystallization Tray and conduct the Combination firing (P1) in the Programat CS furnace. IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Preparing for cementation
Remove the cool restoration from the IPS Object Fix Putty and ‌
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Preparing for cementation
‌ clean the restoration. Remove residue of IPS Object Fix with ultrasound in a water bath. IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Preparing for cementation
Check the occlusion after crystallization.
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Etching and silanating
Etch the restoration with IPS Ceramic Etching Gel for 20 sec. before permanent insertion. IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Etching and silanating
Silanate the etched restoration with Monobond-S.
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step by Step Präparation reinigen, mit Wasser spülen und mit Luft trocknen Primer A und B im Verhältnis 1:1 mischen und auf Dentin und Schmelz auftragen (Einwirkzeit auf Schmelz 30 Sek auf Dentin 15 Sek). Primer dann mit wasser-/ölfreier Luft ausblasen Multilink Automix in die geätzte und silanisierte Restauration applizieren. Einsetzen der Restauration und Entfernung von überschüssigem Zement Befestigung rein selbsthärtend: Überschüsse unmittelbar nach Einsetzen entfernen, v.a. in schlecht zugänglichen Bereichen. Befestigung mit optionaler Lichthärtung: Überschüsse kurz (1-2 Sek) mit Licht anhärten, dann mit Scaler entfernen. Danach alle Fugen ca. 20 Sek. lichthärten
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Cementation with Multilink Automix
Clean preparation, rinse with water, and dry with air. Depending on the cementation material used, subsequently apply the bonding system (as i.e. with Multilink Automix) IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Cementation with Multilink Automix
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Cementation with Multilink Automix
Apply Multilink Automix directly into the silanated restoration
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Cementation with Multilink Automix
Insert the restoration and remove excess material
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Restoration in situ
IPS e.max CAD restoration in situ – high strength and highly aesthetic IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Eingliederung mit Multilink Automix
IPS e.max CAD restoration in situ – high strength and highly aesthetic
IPS e.max CAD
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max System
General features
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation