IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
All-ceramic products
For CAD/CAM chairside application
All-ceramic indications
IPS e.max CAD goes chairside
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD Silicate glass-ceramic block IPS e.max CAD combines efficient and cost-effective processing with strength and aesthetics. A fast and easy crystallization and glaze firing results in tooth-shaded, strong and aesthetic restorations, which can be adhesively, selfadhesively or conventionally cemented. No manual polishing required!
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD Silicate glass-ceramic block Lithium disilicate blocks for the CAD/CAM technique High strength (360 MPa) 2 fabrication techniques (staining technique and cut-back) Restorations can be adhesively, self-adhesively and conventionally cemented. For the Sirona CEREC System Various aesthetic possibilities
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Physical properties of IPS e.max CAD
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Indications
Veneers Partial crowns Anterior and posterior crowns
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD blocks IPS e.max CAD LT New blocks with increased translucency (compared to MO) 13 shades in 2 sizes (I12 and C14) 9 A-D shades A1, A2, A3, A3.5, B1, B2, B3, C2, D3 4 Bleach BL shades BL1, BL2, BL3, BL4
Ideal for restorations in the staining and cut-back technique
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD blocks IPS e.max CAD LT before and after crystallization
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD blocks
ďƒ˜ The shade concept of IPS e.max CAD LT is based on the IPS Empress CAD LT shade concept
Above: IPS e.max CAD LT Below: IPS Empress CAD LT
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Ef fic ien cy ----
---
---
---
------
----
---
----ďƒ
Ae s
th eti cs
IPS e.max CAD LT
Cut-back Fully anatomical stained and glazed
Fully anatomical, glazed
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD The print on the block shows all the important informations at a glance
Product name
Block size
Translucency level
Shade
Preferred indication IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Classification of Ivoclar Vivadent Blocks (Glass ceramic / Oxide ceramic)
B
=
Bridge (only IPS e.max ZirCAD)
C
=
Crown
I
=
Inlay
V
=
Veneer
Number =
Block dimension in mm (height or length)
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Product concept
IPS e.max CAD blocks are available in two sizes. C14 (12.4 x 14.5 x 18.0) I12 (10.4 x 12.0 x 15.0) 18.0 mm
12.4 mm 14.5 mm
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD The blocks can be milled in the existing CEREC unit as well as in the new CEREC MC-XL machine.
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Indications and material properties
Inlays, onlays Veneers, partial and full crowns ---
--Veneers, partial and full crowns ---
Fully anatomical Cut-back technique
Highly aesthetic Strength of 160 MPa Adhesive cementation
Fully anatomical Cut-back technique
Highly aesthetic Strength of 360 MPa adhesive, self-adhesive or conventional cementation IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD – Cementation Cementation (adhesive, self-adhesive or conventional) Veneers
– adhesive
Partial crowns
– adhesive
Anterior/posterior crowns
– adhesive, self-adhesive or conventional
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-Step
Preoperative situation: Crown on tooth 37 should be replaced
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Shade determination by using the respective IPS e.max Press / CAD LT shade guide IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-Step
Preparation according to the preparation guidelines. Observe minimum thicknesses. IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Intra-oral imaging and subsequent CAD/CAM process with the CEREC速 3 System. IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Virtual速 CADbite Clinical Sequence
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Smooth out attachment points and finish the restoration by means of suitable grinding instruments. Observe minimum thicknesses and contact points. IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Try-in in blue state. Fixation with the Try-In pastes. Check the occlusion and articulation and adjust, if required. Grinding adjustments must be done in the „blue“ state prior to the crystallization IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD LT – Accessories IPS e.max CAD Crystallization Tray existing SiN tray 3 newly designed Crystallization Pins
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Two auxiliary firing pastes, i.e. IPS Object Fix Flow and Putty are available. Putty is rather suitable for full crowns, while the Flow version is suitable for veneers and partial crowns. IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Fill the restoration completely with the auxiliary firing paste IPS Object Fix Putty and insert the Crystallization Pin. IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Smooth out forced out auxiliary firing paste using a plastic spatula (OptraSculpt) so that the pin is securely in place. Make sure that the external surfaces of the restoration are not contaminated. IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Apply an even layer of IPS e.max CAD Crystall./Glaze Spray to the restoration ‌ IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
…or apply an even layer of IPS e.max CAD Crystall./Glaze Paste to the restoration using a brush. IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD LT – Accessories IPS e.max CAD Crystall./Shade, Stains, Glaze and Add-On Materials for use on the “blue” restoration Can also be applied on the crystallized restoration Can also be used for adjustments (shade and/or contact points) after crystallization
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD LT – Accessories IPS e.max CAD Crystall./Shades 5 Dentin shades for enhanced chroma in the dentin area 2 Incisal shades to imitate the translucency in the incisal area 0, 1, 2, 3, 4, I1, I2
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD LT – Accessories IPS e.max CAD Crystall./Stains For individual characterizations 7 new Stains white, crème, sunset, copper, olive, khaki, mahogany
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD LT – Accessories IPS e.max CAD Crystall./Glaze Available as glaze paste and glaze spray Spray for fast and easy glazing
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD LT – Accessories IPS e.max CAD Crystall./Glaze 2 possibilities for characterization Option 1 - Paste: Apply the glaze paste on the “blue” restoration Apply Shades and Stains into the paste
Option 2 - Spray: Apply Shades/Stains directly on the “blue” restoration Fix with glaze spray
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD LT – Accessories IPS e.max CAD Crystall./Add-On For adjustments of occlusal/proximal contact points Can be used both during and after crystallization
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Place the restoration in the center of the firing tray and conduct the combination firing. IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Programat CS The ideal glaze and crystallization furnace for IPS e.max CAD LT chairside processing
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Programat CS Easy handling in three steps 1. “Ready“
Selection of the program
2. “Set“
Opening of the furnace
1.
3. “Go“
Start of the program
2. 3.
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Programat CS 3 clearly marked and assigned standard programs P1 = Crystallization/Glaze firing for IPS e.max CAD P2 = Corrective firing for IPS e.max CAD P4 = Glaze firing for IPS Empress CAD 17 additional individual programs
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Programat CS ATK2 Automatic Temperature Checking Set For good crystallization and firing results under consistent conditions
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Remove the restoration from the IPS Object Fix.
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Clean the restoration. Remove residue of IPS Object Fix by means of an ultrasonic bath. IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Check the occlusion after crystallization.
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Etch the restoration with IPS Ceramic Etching Gel for 20 sec. before permanent insertion. IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Silanate the etched restoration with Monobond-S.
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step by Step Clean the preparation, rinse with water and dry with air. Mix Primers A and B in a 1:1 ratio and apply to the dentin and enamel (reaction time on enamel 30 sec, on dentin 15 sec). Disperse the primer with water-/oil-free air. Apply Multilink Automix into the etched and silanized restoration. Insert the restoration and remove excess cement. Purely self-curing cementation: Remove any excess immediately after insertion, especially in difficult-to-reach areas. Cementation with optional light curing: Cure excess material briefly (1-2 sec) with light and remove using a scaler. Then, light cure all joints for approx. 20 sec.
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Cementation with Multilink Automix
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
Apply Multilink Sprint directly into the silanated cavity.
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
Step-by-step
IPS e.max CAD LT restoration in situ – high strength and highly aesthetic IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD LT for CEREC
IPS e.max CAD for CEREC Basic Kit LT 20 x C14 Blocks (A1, A2, A3, B1) IPS e.max CAD Crystall./Shades and Stains IPS e.max CAD Crystall./Glaze Paste IPS e.max CAD Crystall./Glaze Spray IPS e.max CAD Crystallization Tray Accessories (e.g. OptraGate, OptraSculpt….)
IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max CAD Silicate glass-ceramic block IPS e.max CAD LT
combines high strength and high aesthetics
IPS e.max CAD LT
combines efficiency and cost-effectiveness (processing)
IPS e.max CAD LT
combined crystallization and glaze firing in one step
IPS e.max CAD LT
combines easy handling and easy/efficient cementation
IPS e.max CAD LT
offers new possibilities in the CAD/CAM technique due to its uniqueness IPS e.max CAD
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
J. Seger, Liechtenstein IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation
IPS e.max System
IPS Empress
IPS e.max Press
IPS e.max ZirPress IPS e.max ZirCAD
IPS e.max CAD
IPS e.max Ceram
Cementation