Architect Series®
Designer Series®
UNIT SECTIONS Aluminum-Clad Wood OUT-SWING DOOR
5 7/8" [149]
13/16" [20]
VENT
VH
VS
1 7/8" [47]
1" [25]
3/16" [5]
1 5/16" [33]
1 7/8" [47]
FRAME HEIGHT
3/16" [5]
VENT HEAD
4 9/16" [116]
HJ
4 5/8" [117]
LJ
1" [25]
VH
Optional Fold-out Installation Fin 8 3/4" [222]
LJ
LOCK JAMB
HJ
HINGE JAMB 4 5/8" [117]
5 13/16" [148]
13/16" [20]
FRAME WIDTH
VS
VENT SILL
1 5/8" [41]
1" [25]
1 3/16" [30]
ACTIVE / PASSIVE ASTRAGAL
HJ
HJ
HINGE JAMB
5 13/16" [148]
AP
ACTIVE / PASSIVE ASTRAGAL
10 7/8" [276]
AP
HJ
HJ
HINGE JAMB
4 5/8" [117]
13/16" [20]
FRAME WIDTH Scale 3" = 1' 0" All dimensions are approximate. Pella 2015 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
W-OSD-36
Architect Series®
Designer Series®
UNIT SECTIONS Aluminum-Clad Wood Typical Joining Mullions
OUT-SWING DOOR
• Use standard joining mullions when joining fixed door panels. • Sidelights or fixed panels may be joined directly to operable door panels. Composite must be installed with head drip fin and installation fins per standard installation instructions. • Structural mullion must be used for all other combinations.
Scale 3" = 1' 0" All dimensions are approximate. See Installation and Performance at www.PellaADM.com for mullion limitations and reinforcing requirements.
Pella 2015 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
W-OSD-39