Reach for the stars!
by
‌ and the installation is very easy!
1. Arrange the light points and drill the holes
2. Put he fibers into the holes
3. Stick the fibres from the upside
4. Cut the fibres from the downside (they have to be stuck out 3-5 mm)
5. If you do a ceiling coating, please cut he fibres afterwards to app. 1 mm
6. Switch-on the starry sky and be amazed!
Some hot tips to the ‚fibre optics’ subject: - easy fibre installation, e.g. for 1.0 mm fibre strength drill a hole of 1.2 or 1.3 mm! - fibre strengths from 0.5 up to 3.0 mm available - we recommend 50 fibres / m² for a ceiling area up to 10 m², above all, 30 up to 40 fibres / m² are adequate - glue the single fibres from behind, hence, they cannot be unplugged - use high-quality adhesive, e.g. UHU wood glue or UHU plus sofort fest, 2-component adhesive - up to 500 fibres with a diameter of 1.0 mm and a length of 20 m can be placed into one projector - please chose a central place for your projector’s location, to be able to take the fibre lengths as short as possible - for outdoor applications, the protective tube has to be used every time
More detailed information can be obtained from: Phone: +49 (0) 29 34 / 96 11 0 I Fax: +49 (0) 29 34 / 96 11 96 Internet: www.brumberg.com I E-Mail: info@brumberg.com