RX6010C(PC) workshop manual
영M55(RX6010)_01장_안전.indd 1
2011-11-01 오후 5:28:37
PREFACE This manual is to provide servicing personnel with information on the general specifications, service, operating principle, troubleshooting, exploded view including part name, removing and installing procedures for RX6010C(PC)/US,AU,EU tractors with high-end technology. All information in this manual is based on the latest product information available at the time of publication. Therefore, some of the information in this manual may differ from the machine you have. KIOTI has a principle to apply update to the next edition of the manual if there is any. However, KIOTI has no obligation to modify the contents in this manual, especially the contents in the manual which is already distributed or published. The modified information is available in KIOTI's online electronic manual system (DEMSS). This manual is ultimately to satisfy customers with best performance of tractor. If there is any typo, wrong information or question for this manual, feel free to contact KIOTI.
2011. 08 service division DAEDONG INDUSTRIAL Co., Ltd.
Important • Using unspecified parts, fuel and lubricants other than KIOTI's genuine parts can damage the tractor and such damage will not be covered by warranty.
영M55(RX6010)_01장_안전.indd 3
Remark • We reserve the right to make changes throughout the entire manual at any time without notice.
2011-11-01 오후 5:28:39
TABLE OF CONTENTS CHAPTER 1
SAFETY FIRST
CHAPTER 2
GENERAL
CHAPTER 3
ENGINE
CHAPTER 4
CLUTCH
CHAPTER 5
TRANSMISSION
CHAPTER 6
REAR AXLE
CHAPTER 7
BRAKE
CHAPTER 8
FRONT AXLE
CHAPTER 9
STEERING SYSTEM
CHAPTER 10
HYDRAULIC SYSTEM
CHAPTER 11
ELECTRIC & CALIBRATION
CHAPTER 12
CABIN
CHAPTER 13
AIR CONDITIONER & HEATER
CHAPTER 14
INDEX
영M55(RX6010)_01장_안전.indd 5
2011-11-01 오후 5:28:39
RX6010C(PC)
SAFETY FIRST
CHAPTER 1
TABLE OF CONTENTS 1. for SAFETY........................................... 1-2
3. Safety decals.................................... 1-9
1.1 Alert symbols.............................................. 1-2
3.1 Location of decals...................................... 1-9
2. Safety TIPS........................................... 1-3 2.1 Safety gear................................................. 1-3 2.2 Work place ................................................ 1-3 2.3 Safety instructions when preparing tractor...1-4 2.4 Avoid fires................................................... 1-4 2.5 Cautions when handling the battery........... 1-5 2.6 Cautions for high pressure hoses...................1-5 2.7 Use of appropriate tools and equipment.... 1-6 2.8 Handling of hazardous materials................ 1-6 2.9 Handling of rotating blade, shaft and driving belt... 1-7 2.10 Prevention of scald..................................... 1-7 2.11 Disposal of environmental waste................ 1-8 2.12 Cautions when handling tires...................... 1-8
영M55(RX6010)_01장_안전.indd 1
2011-11-01 오후 5:28:39
SAFETY FIRST - FOR SAFETY
RX6010C(PC)
•
Most accidents can be avoided if basic safety instructions and regulations are followed. Always follow the safety regulations and avoid any dangerous situation to prevent an accident.
•
You can be unexpectedly injured if inspecting or servicing the tractor without full knowledge of it. Read the service manual carefully before starting servicing and follow the instructions for servicing, maintenance and inspection to prevent any injury.
ENGINE ENGINE
GENERAL GENERAL
SAFETY SAFETY FIRST FIRST
1. for SAFETY
T46W001A
1.1 Alert symbols In this manual, the following safety-alert symbols are used. Their meanings are as follows:
▶ Remark
▶ CAUTION
FRONT BRAKE AXLE
REAR BRAKE AXLE
REAR HST AXLE
TRANSMI TRANSMISSION SSION
CLUTCH CLUTCH
reaD manual! 매뉴얼 숙지 !
ⱇ#⪣
Remark
CAUTION
STEERING FRONT SYSTEM AXLE
•
HYDRAULIC STEERING SYSTEM SYSTEM
T46W002A
▶ Important
Broaden your knowledge with additionally supplied service information for optimal service.
T46W004A
•
This mark indicates potentially hazardous situation which, if not observed, may result in serious injury.
WARNING T46W003A
•
A/C AND HEATER INDEX
A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
▶ WARNING
This mark indicates emphasis on information which can be confused when servicing. If this information is not carefully read and observed, the tractor cannot fully function or may be damaged.
1-
영M55(RX6010)_01장_안전.indd 2
T46W005A
•
This mark indicates hazardous situation which, if not observed, may result in death or injury.
DH80-W00 Aug. 2011
2011-11-01 오후 5:28:43
RX6010C(PC)
SAFETY FIRST - SAFETY TIPS
SAFETY SAFETY FIRST FIRST
2. Safety TIPS 2.2 Work place
ENGINE ENGINE
GENERAL GENERAL
2.1 Safety gear
WARNING • California Proposition 65 Warning Inhaling exhaust gas can cause cancer or damage the generative function leading to infertility.
TRANSMISSION TRANSMI SSION
When working on the tractor, wear safety gloves, safety shoes, ear plugs, safety goggles, safety helmet, working clothes, etc. appropriate for your working environment. Never wear loose fitting clothing or a tie which can be caught to the rotating part. According to the statistics, most accidents that occurred with rotating parts are due to this inappropriate manner of wearing clothes.
The service should be performed in well-ventilated area. If the engine should be started in an enclosed place, the exhaust gas pipe should be installed.
REAR BRAKE AXLE
T46W006A
REAR HST AXLE
A. VENTILATING SYSTEM
CLUTCH CLUTCH
T46W007A
D. Safety equipment
Be sure to keep a first aid kit and fire extinguisher handy at all times. E. Clean working area
Keep the working area clean before and during work. If any oil or fuel is spilled, it should be cleaned up immediately.
DH80-W00 Aug. 2011
영M55(RX6010)_01장_안전.indd 3
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
The work place should be well illuminated. If working in a dark place or under the tractor, use the work lamp. The work lamp should be covered by the safety cover. The bulb can cause fire due to leaked fuel if it is broken.
ELECTRIC CABIN SYSTEM
C. Illumination
A/CCABIN & HEATER
The work should be done in a wide, level and safe place to prevent slip and fall accident.
A/C INDEX AND HEATER
T46W008A
HYDRAULIC STEERING SYSTEM SYSTEM
FRONT STEERING AXLE SYSTEM
FRONT BRAKE AXLE
B. Safe working place
1-
2011-11-01 오후 5:28:45
2.3 Safety instructions when preparing tractor
RX6010C(PC)
2.4 Avoid fires
ENGINE ENGINE
GENERAL GENERAL
SAFETY SAFETY FIRST FIRST
SAFETY FIRST - SAFETY TIPS
T46W011A
•
Never smoke or allow flames in your work area when servicing the fuel system.
Lower the implement on to the ground.
T46W012A
• T46W010A
•
Stop the engine and remove the key.
•
Put "Do not operate" label on the tractor if necessary.
Keep flames or sparks away from the spray paint or fuel containers and be careful of leak.
HYDRAULIC STEERING SYSTEM SYSTEM
STEERING FRONT SYSTEM AXLE
FRONT BRAKE AXLE
REAR BRAKE AXLE
REAR HST AXLE
TRANSMI TRANSMISSION SSION
CLUTCH CLUTCH
• T46W009A
•
Always disconnect the battery cable before servicing.
•
Be extra cautious of fire when welding.
A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
T46W013A
T46W014A
A/C AND HEATER INDEX
•
1-
영M55(RX6010)_01장_안전.indd 4
Always keep a fire extinguisher in workshop.
DH80-W00 Aug. 2011
2011-11-01 오후 5:28:49
SAFETY FIRST - SAFETY TIPS 2.6 Cautions for high pressure hoses
T46W015A
Always disconnect the negative battery cable first and reconnect it last to avoid sparks from an accidental short circuit. You can get injured or fire may break out.
T46W019A
•
The hydraulic fluid leaked from high pressure hoses or pipes can penetrate your skin.
REAR HST AXLE
TRANSMISSION TRANSMI SSION
•
CLUTCH CLUTCH
ENGINE ENGINE
GENERAL GENERAL
2.5 Cautions when handling the battery
SAFETY SAFETY FIRST FIRST
RX6010C(PC)
T46W016A
T46W020A
•
Before connecting a high pressure hose or pipe, stop the engine and depressurize it by valve.
•
Check the bolts for tightness before starting the engine after servicing the hydraulic system.
•
Use a cardboard or plank when checking leakage.
FRONT BRAKE AXLE
REAR BRAKE AXLE
Do not charge the frozen battery. Charging the frozen battery can cause explosion. Let the battery warmed up to ambient temperature (16°C, 60°F) before charging.
FRONT STEERING AXLE SYSTEM
•
Never connect the battery's negative and positive cables with metal for test. Use only tester when checking the battery voltage.
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
•
T46W021A
• T46W018A
The battery contains the acid that can burn you. When it contacts with your eyes, you may lose your sight.
DH80-W00 Aug. 2011
영M55(RX6010)_01장_안전.indd 5
A/C INDEX AND HEATER
•
Never weld the high pressure pipe or the surrounding area. The pipe or hose can be heated and explode which can lead to fire or burn.
ELECTRIC CABIN SYSTEM
Keep sparks and flames (match, lighter) away from the battery. The battery can explode due to the battery fluid.
A/CCABIN & HEATER
•
HYDRAULIC STEERING SYSTEM SYSTEM
T46W017A
1-
2011-11-01 오후 5:28:53
RX6010C(PC)
2.7 Use of appropriate tools and equipment
2.8 Handling of hazardous materials
•
Use the appropriate tools in proper size. If an inappropriate tool is used, it can be slipped which can damage parts or injure you.
•
•
Do not confuse units (mm, inch, etc.).
•
Use the air impact wrench only when unscrewing the bolts or nuts. Such wrench should not be used when assembly precisely machined parts which its tightening torque should be strictly observed. It can cause malfunction.
ENGINE ENGINE
GENERAL GENERAL
SAFETY SAFETY FIRST FIRST
SAFETY FIRST - SAFETY TIPS
Be careful of a socket popped out due to the turning force when using the air impact wrench. Especially, be extra cautious when working on connection or socket with joint.
Remark • All KIOTI's genuine parts contain no asbetos.
•
These materials should be rinsed or wiped away after spraying oil.
FRONT BRAKE AXLE
When lifting the tractor with a hydraulic jack or a hoist, fix it firmly and install the auxiliary support. Never work under the tractor if the support and the hydraulic jack (hoist) are not installed.
•
When using a hydraulic jack or a hoist, do not use it over the limit of the equipment and the conveying belt.
•
Make sure that the hydraulic lock operates properly before using the hydraulic jack. Improper use of lock can cause a serious accident.
•
Check the buttons and operating direction of the hoist before using it. Improper operation can cause a serious accident.
•
Do not use wooden blocks or bricks as support under the tractor. As the tractor's weight is continuously applied to them, they can be broken or collapsed.
T46W022A
A/C AND HEATER INDEX
A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
HYDRAULIC STEERING SYSTEM SYSTEM
•
STEERING FRONT SYSTEM AXLE
REAR BRAKE AXLE
REAR HST AXLE
TRANSMI TRANSMISSION SSION
CLUTCH CLUTCH
•
Do not use pressurized air to blow out hazardous materials, such as clutch dust, with compressed air. Inhaling such hazardous materials can damage your health.
1-
영M55(RX6010)_01장_안전.indd 6
DH80-W00 Aug. 2011
2011-11-01 오후 5:28:54
SAFETY FIRST - SAFETY TIPS 2.10 Prevention of scald
ENGINE ENGINE
GENERAL GENERAL
2.9 Handling of rotating blade, shaft and driving belt
SAFETY SAFETY FIRST FIRST
RX6010C(PC)
•
Do not open the radiator cap when the radiator is hot. Hot coolant or steam can be surged leading to a serious scald.
Do not set a hand or a foot into the tractor's rotating blade or PTO shaft.
Be extra careful when you are in loose clothes.
Check the surface temperature of the container before draining the engine oil, transmission fluid, coolant, etc. If it is hot, let it cool down before draining it. There is danger of burning.
Be careful not to get caught by the rotating engine cooling fan.
•
Perform any service on the engine parts (muffler, exhaust manifold, turbocharger, etc.) only when they are not hot.
A/CCABIN & HEATER
ELECTRIC CABIN SYSTEM
•
HYDRAULIC STEERING SYSTEM SYSTEM
• T46W025A
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
T46W028A
FRONT STEERING AXLE SYSTEM
FRONT BRAKE AXLE
REAR BRAKE AXLE
•
REAR HST AXLE
T46W024A
TRANSMISSION TRANSMI SSION
T46W027A
CLUTCH CLUTCH
T46W023A
•
A/C INDEX AND HEATER
T46W026A
You can be seriously injured if your hand or clothes is caught by the rotating fan belt or A/C belt.
DH80-W00 Aug. 2011
영M55(RX6010)_01장_안전.indd 7
1-
2011-11-01 오후 5:28:57
2.11 Disposal of environmental waste
RX6010C(PC)
2.12 Cautions when handling tires
T46W029A
•
Observe all relevant environmental protection regulations when disposing used oil, transmission fluid, coolant, oil filter, etc. Otherwise, they can pollute the environment seriously and you can be charged in violation of regulations.
T46W030A
•
The tire rims can fall out of the tires. Therefore, stay out of its way when checking or inflating tires.
FRONT BRAKE AXLE
REAR BRAKE AXLE
REAR HST AXLE
TRANSMI TRANSMISSION SSION
CLUTCH CLUTCH
ENGINE ENGINE
GENERAL GENERAL
SAFETY SAFETY FIRST FIRST
SAFETY FIRST - SAFETY TIPS
•
Do not weld or apply heat to the tire rim or disc. The tire can explode due to the rapidly increased pressure in the tire.
•
Check tires for inflation pressure, damage, deformation, extended wear on lug and damage of rim and disc. Also check if wheel bolts, rim bolts and nuts are loose.
A/C AND HEATER INDEX
A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
HYDRAULIC STEERING SYSTEM SYSTEM
STEERING FRONT SYSTEM AXLE
T46W031A
1-
영M55(RX6010)_01장_안전.indd 8
DH80-W00 Aug. 2011
2011-11-01 오후 5:29:00
RX6010C(PC)
SAFETY FIRST - SAFETY DECALS
When replacing parts, be sure to install the appropriate safety decal as well. Otherwise, the customer's safety will be threatened.
•
If a decal is damaged or detached, always replace with the appropriate decal.
•
The decal and its attaching location are as follows.
•
Part numbers appear at the bottom of decals.
GENERAL GENERAL
•
SAFETY SAFETY FIRST FIRST
3. Safety decals
A/C INDEX AND HEATER
A/CCABIN & HEATER
ELECTRIC CABIN SYSTEM
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
HYDRAULIC STEERING SYSTEM SYSTEM
FRONT STEERING AXLE SYSTEM
FRONT BRAKE AXLE
REAR BRAKE AXLE
REAR HST AXLE
TRANSMISSION TRANSMI SSION
CLUTCH CLUTCH
ENGINE ENGINE
3.1 Location of decals
H80W101A
DH80-W00 Aug. 2011
영M55(RX6010)_01장_안전.indd 9
1-
2011-11-01 오후 5:29:08
SAFETY FIRST - SAFETY DECALS 4. Part No. : T4930-52481
SAFETY SAFETY FIRST FIRST
1. Part No. : T4601-52411
RX6010C(PC)
GENERAL GENERAL
Avoid flames and sparks. STOP engine while refueling ONLY use diesel.
2. Part No. : T4810-52121
5. Part No. : T4682-53552
preCaUTIOnS DUrInG OperaTIOn
REAR BRAKE AXLE
REAR HST AXLE
TRANSMI TRANSMISSION SSION
CLUTCH CLUTCH
ENGINE ENGINE
T4601-52411
3. Part No. : T4930-52311
6. Part No. : T4930-52471
WARNING To prevent severe and deadly injuries during P.T.O operation: 1. All protective components should be in place.
To prevent accident during operation: 1. Implement that pulls or pushes objects should be attached only to the drawbar. 2. Implements that are designed to use the 3-point hitch should only use the 3-point hitch.
2. Do not let your hands, feet and clothes come near the implement. 3. When disengaging an implement from the P.T.O, stop the engine in advance. When repairing or servicing the tractor or its part, depress the brake pedal to set the parking brake. Also, make sure to chock the wheels when parking on a hill.
Do NOT run an engine in an enclosed area.
Exhaust fumes can cause sickness or possible death.
Do NOT touch a muffler with bare hands.
A/C AND HEATER INDEX
A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
HYDRAULIC STEERING SYSTEM SYSTEM
STEERING FRONT SYSTEM AXLE
FRONT BRAKE AXLE
.
1-10
영M55(RX6010)_01장_안전.indd 10
DH80-W00 Aug. 2011
2011-11-01 오후 5:29:14
SAFETY FIRST - SAFETY DECALS
7. Part No. : T4930-52351
10. Part No. : T4810-51181 SAFETY SAFETY FIRST FIRST
RX6010C(PC)
Precautions for safe driving
Take the following precautions to use the tractor safely.
Parking/ stopping When servicing/ repairing
GENERAL GENERAL REAR HST AXLE
11. Part No. : T2610-52451
WARNING
Use the quick turn function only during normal field work but never use it under the following conditions: 1. Driving at a high speed 2. Driving on a hill or sharp curve 3. Working with an implement, such as a plow at a high speed 4. Working with the loader attached
REAR BRAKE AXLE
1. Be sure to follow instructions specified in the manual and the safety decals. 2. Make sure to follow the driving instructions specified in the manual and decals for safe driving. 3. Do not modify any part of the vehicle. 4. Never attach an implement with excessive capacity other than the standard implements.
14) Stop the engine. 15) Service or repair the vehicle on a safe and level place.
KIOTI has no responsibility for problems occurred by negligence of a driver.
FRONT BRAKE AXLE
WARNING
9) Use planks to drive in and out of a field. 10) Never let anyone come near the tractor during operation. 11) Stop the engine and engage the parking brake. 12) Chock the wheels on a hill. 13) Lower the implement for safety.
FRONT STEERING AXLE SYSTEM
8. Part No. : T4930-52381
ENGINE ENGINE
During operation
CLUTCH CLUTCH
Driving
1) Set the shift lever in the neutral position. 2) Engage the parking brake. 3) Make sure to interconnect the left and right brake pedals. 4) Never attempt abrupt start, braking and turning. 5) Never let anyone ride on the tractor, other than the driver. 6) Do not use the differential lock during driving. 7) Do not rotate an implement, such as a rotary cultivator. 8) Slow down your speed on an unpaved road, rural path, hill and sharp curve.
TRANSMISSION TRANSMI SSION
At start
WARNING
12. Part No. : T4930-52341
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
9. Part No. : T4930-52431
HYDRAULIC STEERING SYSTEM SYSTEM
KIOTI has no responsibility for problems occurred by negligence of a driver.
WARNING
ELECTRIC CABIN SYSTEM
1. Turning on the A/C for an extended period of time makes the air stuffy in the cabin. Make sure to ventilate the cabin regularly.
A/CCABIN & HEATER
2. Sleeping with the A/C ON can cause suffocation. 1. For the tractor equipped with the ROPS, make sure to wear the seat belt all the time. For the tractor not equipped with the ROPS, never wear the seat belt.
DH80-W00 Aug. 2011
영M55(RX6010)_01장_안전.indd 11
A/C INDEX AND HEATER
2. When driving the tractor equipped with the ROPS, make sure to wear the seat belt. If the tractor rolls over, hold the steering wheel firmly and never jump out of the tractor.
1-11
2011-11-01 오후 5:29:19
SAFETY FIRST - SAFETY DECALS
SAFETY SAFETY FIRST FIRST
13. Part No. : T4930-52371
RX6010C(PC)
16. Part No. : T4625-52351
Do not remove the filler cap while the engine is running or just stopped. Scalding hot coolant can be blown out under pressure which can cause serious injury.
14. Part No. : T4710-52201
WARNING
REAR BRAKE AXLE
REAR HST AXLE
TRANSMI TRANSMISSION SSION
CLUTCH CLUTCH
ENGINE ENGINE
GENERAL GENERAL
WARNING
Lowering
Precautions during rocker switch operation ► Do not operate any part outside the vehicle other than installation and removal of an implement. ► Make sure to set all the levers in their neutral position and apply the parking brake before working on level ground. ►Turn OFF the P.T.O switch before working on a field. ►Working on a field with the engine at a high speed can cause the attached implement moving up, down, left or right abruptly. Make sure to run the engine at a low speed and secure a safe distance before working on a field.
15. Part No. : T4930-52391
17. Part No. : T2660-52191
CAUTION
1. Using parking brake Before leaving the vehicle, park the vehicle Disengage and apply the parking brake. Depress the brake pedals before leaving the vehicle. 2. Shifting Depress the clutch pedal fully before shifting Engage the gear lever. Otherwise, abnormal noise is produced from the gears. which indicates damage.
18. Part No. : T4938-52321
CAUTION 1. To use an implement that uses external hydraulic pressure, such as a front loader, check the transmission fluid amount. If it is insufficient, add the fluid before its operation. 2. Lower the bucket onto the ground before stopping the engine. Otherwise, it can cause an accident or injury.
A/C AND HEATER INDEX
A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
HYDRAULIC STEERING SYSTEM SYSTEM
STEERING FRONT SYSTEM AXLE
FRONT BRAKE AXLE
Lifting
1-12
영M55(RX6010)_01장_안전.indd 12
DH80-W00 Aug. 2011
2011-11-01 오후 5:29:24
RX6010C(PC)
GENERAL
CHAPTER 2
TABLE OF CONTENTS 1. Description for symbols and abbreviations.................................... 2-2 2. TRACTOR EXTERIOR VIEW................... 2-3 3. Identification number..................... 2-3 3.1 Tractor serial number................................. 2-3 3.2 Engine serial number................................. 2-4 3.3 Transmission serial number....................... 2-4
4. Dimensions........................................... 2-5 5. Specifications.................................... 2-6
9. Tire maintenance............................ 2-18 9.1 Proper inflation pressure.......................... 2-18 9.2 Wheel bolt torque..................................... 2-18
10. Tightening torque........................ 2-19 10.1 General use screws, bolts and nuts....... 2-19 10.2 Stud Bolts............................................... 2-19 10.3 American standard screws, bolts and nuts with UNC or UNF threads..................... 2-20
11. Part Number Assignment Standard for KIOTI Bolts and Nuts................... 2-21
6.1 Gear Arrangement...................................... 2-7 6.2 Rotating speed ratio (Engine vs. rear axle)....2-11
11.1 Part Number Assignment Standard for KIOTI Bolts....................................................... 2-21 11.2 Part Number Assignment Standard for KIOTI Nuts....................................................... 2-22
7. Relative speed ratio of front wheels................................................ 2-13
12. Spring pin and snap ring installation..................................... 2-23
7.1 Calculation for relative speed ratio of front wheels... 2-13 7.2 Method of measuring circumference........ 2-14
12.1 Spring pin type....................................... 2-23 12.2 Snap ring installation.............................. 2-23
8. Maintenance..................................... 2-15
13. Unit Conversion Table................ 2-24
6. Driving speed...................................... 2-7
8.1 Maintenance schedule chart.................... 2-15 8.2 Lubrication list.......................................... 2-17
영M55(RX6010)_02장_일반.indd 1
2011-11-01 오후 5:32:10
RX6010C(PC)
GENERAL - DESCRIPTION FOR SYMBOLS AND ABBREVIATIONS
There are various symbols used in this manual. Their design and meanings are as follows:
Symbols High speed range
Engine coolant tempera-
Mid speed
ture
range
Parking brake
TRANSMI TRANSMISSION SSION
ENGINE ENGINE
Fuel level
CLUTCH CLUTCH
GENERAL GENERAL
SAFETY SAFETY FIRST FIRST
1. Description for symbols and abbreviations
STEERING FRONT SYSTEM AXLE
FRONT BRAKE AXLE
REAR BRAKE AXLE
REAR HST AXLE
Battery not charged
HYDRAULIC STEERING SYSTEM SYSTEM
Headlamp - high beam
Low speed
Front wheel drive - en-
range
gaged
Neutral position
High speed
Engine oil pressure
Coolant
Low speed
Turn signal lamp
Preheat
Creep speed
PTO clutch control - en-
QT (Quick
gaged
Turn)
PTO clutch control - dis-
H: High speed
engaged
drive
Differential lock
Position control
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN A/C AND HEATER INDEX
Headlamp - low beam
Hazard warning lamp
L: Low speed drive Automatic draft operation Automatic horizontal operation
tilling depth operation
Turn-up
Backup
Automatic
Brake (one side)
Description for abbreviations • 4WD .......Four wheel drive
• p.T.O....... Power Take Off
• Api .........American Petroleum Institute
• rh/Lh .... Right hand side and left hand side (seen from operator)
• ASAE
American Society of Agricultural Engineers
• ASTm .....American Society for Testing and Materials • hi-Lo ......High speed-Low speed
• rOpS .....Roll over protection structure • rpm ........Revolutions Per Minute • SAE ........Society of Automotive Engineers • Smv .......Slow Moving Vehicle
• m/s .........Meter per second
2-
영M55(RX6010)_02장_일반.indd 2
DH80-W00 Aug. 2011
2011-11-01 오후 5:32:28
RX6010C(PC) GENERAL - TRACTOR EXTERIOR VIEW/IDENTIFICATION NUMBER
Tractor serial number assignment standard
3.1 Tractor serial number
K A83 0 0 0 0 2 Production serial number Example) 0 0 0 0 2: The second chassis manufactured in that year Model � �
A83
RX6010C
� �
� �
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
� �
HYDRAULIC STEERING SYSTEM SYSTEM
Example)
Year of manufacturing
A03W202A
The tractor's serial number is attached on the front right side of the front axle frame. DH80-W00 Aug. 2011
영M55(RX6010)_02장_일반.indd 3
2004 2005 2006 2007 2008 2009 2010 2011 2012
� �
� �
A/CCABIN & HEATER
D E F G H J K L M
A/C INDEX AND HEATER
A03W203A
� �
ELECTRIC CABIN SYSTEM
Example) � �
FRONT BRAKE AXLE
3. Identification number
FRONT STEERING AXLE SYSTEM
A03W201A
REAR BRAKE AXLE
REAR HST AXLE
TRANSMISSION TRANSMI SSION
CLUTCH CLUTCH
ENGINE ENGINE
GENERAL GENERAL
SAFETY SAFETY FIRST FIRST
2. TRACTOR EXTERIOR VIEW
2-
2011-11-01 오후 5:32:38
GENERAL - IDENTIFICATION NUMBER
3.3 Transmission serial number
A03W206A
The engine serial number, model name and engine specifications are stamped on the front side of the fuel injection pump, intake manifold and engine cylinder head cover.
A03W207A
The transmission serial number is stamped on the range shift lever case surface on the left side of the transmission.
A/C AND HEATER INDEX
A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
HYDRAULIC STEERING SYSTEM SYSTEM
STEERING FRONT SYSTEM AXLE
FRONT BRAKE AXLE
REAR BRAKE AXLE
REAR HST AXLE
TRANSMI TRANSMISSION SSION
CLUTCH CLUTCH
ENGINE ENGINE
GENERAL GENERAL
SAFETY SAFETY FIRST FIRST
3.2 Engine serial number
RX6010C(PC)
2-
영M55(RX6010)_02장_일반.indd 4
DH80-W00 Aug. 2011
2011-11-01 오후 5:32:44
RX6010C(PC)
GENERAL - DIMENSIONS
ENGINE ENGINE FRONT BRAKE AXLE
µå ¡ÇÁÆ
Æ÷Áö¼
î 80.0 Ç Á 83.0 Á î
C
REAR BRAKE AXLE
REAR HST AXLE
TRANSMISSION TRANSMI SSION
CLUTCH CLUTCH
B
E2
E1
GENERAL GENERAL
SAFETY SAFETY FIRST FIRST
4. Dimensions
D A E D O N G 2 7 K G
FRONT STEERING AXLE SYSTEM
F
D
A03W208A
mm (in.) RX6010C(PC)/AU, EU
Remarks
A1 : Overall length
4,020 (158.3)
4,020 (158.3)
Including front weight
A2 : Overall length
3,700 (145.7)
3,700 (145.7)
B : Overall width
1,755 (69.1)
1,875 (73.8)
C : Overall height
2,610 (102.8)
2,630 (103.5)
D : Wheel base
2,100 (82.7)
2,100 (82.7)
E : Tread
E1: Front Wheel
9.5 - 20
1,375 (54.1)
11.2 - 20
1,475 (58.1)
E2: rear Wheel
14.9 - 28
1,375 (54.1)
14.9 - 30
1,490 (58.7)
F : min. ground clearance
DH80-W00 Aug. 2011
영M55(RX6010)_02장_일반.indd 5
400 (15.7)
A/CCABIN & HEATER
RX6010C(PC)/USA
A/C INDEX AND HEATER
Item
ELECTRIC CABIN SYSTEM
A1
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
HYDRAULIC STEERING SYSTEM SYSTEM
A2
420 (16.5)
2-
2011-11-01 오후 5:32:47
RX6010C(PC)
GENERAL - SPECIFICATIONS SAFETY SAFETY FIRST FIRST
5. Specifications
GENERAL GENERAL
Capacity
Engine
Type
Driving system
ENGINE ENGINE CLUTCH CLUTCH TRANSMI TRANSMISSION SSION REAR HST AXLE REAR BRAKE AXLE
USA
Model
Max. power Number of cylinders Bore x Stroke Total displacement Rated revolution Injection timing Injection sequence Fuel tank Engine crankcase Engine coolant Transmission case Front axle support Clutch Transmission system
HP(Kw)/rpm mm (in.) cc(cu in.) (rpm)
ℓ (U.S.gal) ℓ (U.S.gal) ℓ (U.S.gal) ℓ (U.S.gal) ℓ (U.S.gal) Main shift Shuttle Range shift Number of gears
Brake system Four wheel drive Differential lock
FRONT BRAKE AXLE
Tire size
Front wheel Rear wheel
in. in.
Hydraulic system
Hydraulic lift control Steering Pump oil flow
Main ℓ/min (U.S.gal) Steering ℓ/min (U.S.gal)
3-point hitch type From 610 mm behind Max. lifting capacity kgf (lbs) Under lower link Number of remote hydraulic valve
PTO
Type
Driving speed
STEERING FRONT SYSTEM AXLE HYDRAULIC STEERING SYSTEM SYSTEM HYDRAULIC ELECTRIC & CALIBRATION SYSTEM A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN A/C AND HEATER INDEX
RX6010C
Model
PTO shaft dimension PTO Speed (PTO rpm/ engine rpm)
1st
in. rpm
2nd
rpm
Forward
Km/h (mile/h)
Reverse
Km/h (mile/h)
Min. turning radius (when braking) mm (in.) Weight (including cabin, excluding front weight) kgf (lbs)
RX6010PC
AU/EU
4B243TLWM Upright, 4-cylinder, watercooled 4-cycle, diesel 59.0 (44.0) / 2600 4 87 X 102.4 (3.4 X 4.0) 2.435 (148.6) 2,600 BTDC 22° 1-3-4-2 95 / 25.1 7.7 / 2.03 9.1 / 2.4 58 / 15.3 8.5 / 2.2 Dry type single stage 4-gear, synchromesh Synchromesh 3-gear, constant-mesh F12 X R12 Wet type, multiple plates Hydraulic, wet Hydraulic type multidog clutch plate clutch Pin shift 9.5-20 11.2-20 14.9-28 14.9-30 Position, draft and mixed control Full hydraulic power 41.6 (10.98)
USA
AU/EU
4B243TLWM-K ← ← ← ← ← ← ← ← ← ← ← ← ← Hydraulic, wet multi discs ← Power ← ← ← Hydraulic, wet Hydraulic type multidog clutch plate clutch ← 9.5-20 11.2-20 14.9-28 14.9-30 ← ← ←
26.0 (6.86)
←
SAE category Ⅱ 1,683 (3,710) 2,378 (5,243) 1 Independent PTO, hydraulic wet type multi-plate clutch SAE 1 3/8", 6 splines 540 540
← ← ← ← ← ← 540
540
-
1000
-
1000
1.86~31.56
1.93~38.54
1.86~31.56
1.93~38.54
(1.16~19.61) 1.83~31.03
(1.20~23.95) 1.90~37.90
(1.16~19.61) 1.83~31.03
(1.20~23.95) 1.90~37.90
(1.14~19.28)
(1.18~23.55)
(1.14~19.28)
(1.18~23.55)
3,020
3,110
3,020
3,110
(118.9) 2,575
(122.4) 2,610
(118.9) 2,575
(122.4) 2,610
(5,677)
(5,754)
(5,677)
(5,754)
NOTES: The specifications are subject to change without notice.
2-
영M55(RX6010)_02장_일반.indd 6
DH80-W00 Aug. 2011
2011-11-01 오후 5:32:49
RX6010C(PC)
GENERAL - DRIVING SPEED
6.1 Gear Arrangement
GENERAL GENERAL
To calculate the driving speed, the rotating ratios for each gear should be calculated based on the transmission and the gear arrangement of the rear axle beforehand.
SAFETY SAFETY FIRST FIRST
6. Driving speed
Gear arrangement of transmission
TRANSMISSION TRANSMI SSION REAR BRAKE AXLE
REAR HST AXLE
23
34
26
28
RX6010PC/usa
8
FRONT BRAKE AXLE FRONT STEERING AXLE SYSTEM HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
38 35
ELECTRIC CABIN SYSTEM
28
31
14 19 17 22
RX6010PC/usa
A/C INDEX AND HEATER
A/CCABIN & HEATER
32
29
21
25 36
33
HYDRAULIC STEERING SYSTEM SYSTEM
23
28
26
31
21
29
31
27
45
17
45
15
39
CLUTCH CLUTCH
32
16
26
21
ENGINE ENGINE
RX6010C/usa
H80W201A
DH80-W00 Aug. 2011
영M55(RX6010)_02장_일반.indd 7
2-
2011-11-01 오후 5:32:51
A/C AND HEATER INDEX
A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
2-
영M55(RX6010)_02장_일반.indd 8 32
29
28
22
21
36 33
24
31
35
38
14
25
33
STEERING FRONT SYSTEM AXLE
19 17
HYDRAULIC STEERING SYSTEM SYSTEM FRONT BRAKE AXLE
23
28
21
31
26
REAR BRAKE AXLE
REAR HST AXLE
27
31
29
34
45
17
34
15
8
39
CLUTCH CLUTCH
ENGINE ENGINE
23
28
RX6010pc/Au,Eu
26
45
TRANSMI TRANSMISSION SSION
32
16
21
26
GENERAL GENERAL
SAFETY SAFETY FIRST FIRST
GENERAL - DRIVING SPEED RX6010C(PC)
RX6010C/Au,Eu
RX6010pc/Au,Eu
H80W202A
DH80-W00 Aug. 2011
2011-11-01 오후 5:32:54
A/C INDEX AND HEATER
A/CCABIN & HEATER
HYDRAULIC STEERING SYSTEM SYSTEM
FRONT STEERING AXLE SYSTEM
REAR HST AXLE
TRANSMISSION TRANSMI SSION
CLUTCH CLUTCH
45
DH80-W00 Aug. 2011
영M55(RX6010)_02장_일반.indd 9
8
13
12
24 11
10
ENGINE ENGINE
GENERAL GENERAL
SAFETY SAFETY FIRST FIRST
Gear arrangement of rear axle
22
A03W211A
Gear arrangement of front axle
12
23 16
12
REAR BRAKE AXLE
27
FRONT BRAKE AXLE
39
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
66
ELECTRIC CABIN SYSTEM
RX6010C(PC) GENERAL - DRIVING SPEED
66
12
27
A03W212A
2-
2011-11-01 오후 5:32:56
GENERAL - DRIVING SPEED
RX6010C(PC)
SAFETY SAFETY FIRST FIRST
6.1.1 Arrangement of main shift gear and rear axle gears Drive gear
Main shift
29
1:
GENERAL GENERAL
32
2:
ENGINE ENGINE
3:
29 32
REAR HST AXLE REAR BRAKE AXLE
17 35
R:
H:
28 21 31
x
31
19
8
12
17
39
(12 + 66)
31 15
L:
31
45 29
M:
26
Final drive gear
45
22 28
Main 1st gear x
14 38
Forward x
23 28
Range shift gear H x
45 17
spiral x
8 39
Final drive x
12 (12 + 66)
= 0.02291
rear axle (forward, high speed (range shift gear H) and 1st gear) = Rotating speed of rear axle / engine rpm Example) Rotating speed of rear axle (at engine speed of 2600 rpm): 2600 x 0.02291 = 59.6 RPM
6.1.2 Rolling circumference of rear wheels Model
FRONT BRAKE AXLE STEERING FRONT SYSTEM AXLE
38
23
F:
Spiral bevel gear
Tire
USA AG AU/EU
•
Tire sizes
Circumference (m)
Front wheel
9.5-20
2.870
Rear wheel
14.9-28
4.140
Front wheel
11.2-20
2.985
Rear wheel
14.9-30
4.178
The rear tire specifications and tire circumference are specified by the tire manufacturer based on the inflation pressure of the standard tire and the standard load application. Therefore, the actual circumference may be different depending on conditions and it is recommended to measure the actual circumference.
A/C AND HEATER INDEX
A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
HYDRAULIC STEERING SYSTEM SYSTEM
14
Range shift gear
Example for calculating the rotating speed ratio of Driving
TRANSMI TRANSMISSION SSION
CLUTCH CLUTCH
4:
· •
Shuttle gear
gear
2-10
영M55(RX6010)_02장_일반.indd 10
DH80-W00 Aug. 2011
2011-11-01 오후 5:32:57
RX6010C(PC)
GENERAL - DRIVING SPEED
*
SAFETY SAFETY FIRST FIRST
6.2 Rotating speed ratio (engine vs. rear axle) 6.2.1 Driving speed At rated engine rpm (2,600 rpm) with standard tires.
Rolling cir60 Rear axle x cumference of x rpm 1000 rear wheels
=
Rotating Rolling cir60 Engine x speed ratio x cumference of x rpm 1000 of rear axle rear wheels
ENGINE ENGINE
=
CLUTCH CLUTCH
Driving speed (km/h)
GENERAL GENERAL
Calculation of driving speed
Forward driving speed table (at 2,600 rpm)
M
km/h
MPH
1st
1.86
1.16
1.88
1.17
2nd
2.46
1.53
2.48
1.54
3rd
3.10
1.93
3.13
1.94
4th
3.97
2.47
4.01
2.49
1st
5.23
3.25
5.28
3.28
2nd
6.89
4.28
6.96
4.32
3rd
8.70
5.41
8.78
5.46
4th
11.15
6.93
11.25
6.99
1st
14.80
9.20
14.93
9.28
2nd
19.51
12.12
19.69
12.24
3rd
24.62
15.30
24.84
15.44
4th
31.56
19.61
31.85
19.79
TRANSMISSION TRANSMI SSION
MPH
REAR HST AXLE
km/h
A/C INDEX AND HEATER
A/CCABIN & HEATER
ELECTRIC CABIN SYSTEM
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
HYDRAULIC STEERING SYSTEM SYSTEM
H
Main shift
REAR BRAKE AXLE
L
AU/EU (AG 14.9-30)
FRONT BRAKE AXLE
Range shift
USA (AG 14.9-28)
FRONT STEERING AXLE SYSTEM
Model
DH80-W00 Aug. 2011
영M55(RX6010)_02장_일반.indd 11
2-11
2011-11-01 오후 5:32:58
GENERAL - DRIVING SPEED
RX6010C(PC)
• Forward and reverse driving speed ratio
23 28
Speed ratio for
Forward/reforward gear verse speed = Speed ratio for ratio
reverse gear
=
21 31 x 31 26
= 1.017
Therefore, the reverse driving speed for the tractor is 98.3% of the forward driving speed. Reverse driving speed = forward driving speed x 0.98328
Reverse driving speed table Model Range shift
REAR HST AXLE
TRANSMI TRANSMISSION SSION
CLUTCH CLUTCH
ENGINE ENGINE
GENERAL GENERAL
SAFETY SAFETY FIRST FIRST
6.2.2 Reverse driving speed
REAR BRAKE AXLE
L
FRONT BRAKE AXLE
M
AU/EU (AG 14.9-30)
Main shift
km/h
MPH
km/h
MPH
1st
1.83
1.14
1.85
1.15
2nd
2.42
1.50
2.44
1.52
3rd
3.05
1.90
3.08
1.91
4th
3.90
2.42
3.94
2.45
1st
5.14
3.19
5.19
3.23
2nd
6.77
4.21
6.84
4.25
3rd
8.55
5.31
8.63
5.36
4th
10.96
6.81
11.07
6.88
1st
14.55
9.04
14.68
9.12
2nd
19.18
11.92
19.36
12.03
3rd
24.21
15.04
24.43
15.18
4th
31.03
19.28
31.32
19.46
A/C AND HEATER INDEX
A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
HYDRAULIC STEERING SYSTEM SYSTEM
STEERING FRONT SYSTEM AXLE
H
USA (AG 14.9-28)
2-12
영M55(RX6010)_02장_일반.indd 12
DH80-W00 Aug. 2011
2011-11-01 오후 5:32:58
GENERAL - RELATIVE SPEED RATIO OF FRONT WHEELS
RX6010C(PC)
If this relative speed ratio is not proper during driving with front wheel drive, the tractor may not be driven straight forward and the mechanical shift system may not be disengaged. Also, the durable life of front tire, the gears for front axle or the drive connecting system for front axle may be affected.
▶ Firstly, calculate the speed reduction ratio of the front axle referring to the arrangement table of the main gear shift and front axle gear. (Refer to the section 6.1 "Gear arrangement.") Arrangement of main shift gear and front axle gears Front gear
Shuttle gear
Range shift gear
Idle gear
axle spi-
Upper
Final drive
ral bevel bevel gear bevel gear
14
1:
32
17
2:
23
F:
38 R:
35
21 31
H:
28 x
31
19
3:
27
x
26
10
11
12
34
23
24
45
31 15
L:
31
31
17 29
M:
26
45
FRONT BRAKE AXLE
29
REAR BRAKE AXLE
gear
45
Example) What is the speed ratio of the front axle for forward, high speed (range shift gear H) and main 1st gear?
14 38
x
23 28
x
45 17
x
31 27
x
26 34
x
10 23
x
11 24
x
12 45
= 0.033872
A/C INDEX AND HEATER
A/CCABIN & HEATER
ELECTRIC CABIN SYSTEM
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
32
x
HYDRAULIC STEERING SYSTEM SYSTEM
29
FRONT STEERING AXLE SYSTEM
Drive gear
Main shift
TRANSMISSION TRANSMI SSION
The speed ratio between the front axle and the rear axle is calculated with the gear arrangement of the transmission and the front axle. (Refer to the figure for gear arrangement in section 6.1.)
REAR HST AXLE
The relative speed ratio for front wheel is calculated as follows:
CLUTCH CLUTCH
ENGINE ENGINE
7.1 Calculation for relative speed ratio of front wheels
GENERAL GENERAL
It is ideal to set the speed of the front wheels to 1 ~ 5% faster than the one of the rear wheels when the front wheel drive is in operation. However, some agricultural or industrial tires may not fulfill this function. Therefore, KIOTI allows -1 ~ 7% of the relative speed ratio for front wheels.
SAFETY SAFETY FIRST FIRST
7. Relative speed ratio of front wheels
DH80-W00 Aug. 2011
영M55(RX6010)_02장_일반.indd 13
2-13
2011-11-01 오후 5:32:59
Example) What is the speed ratio of the rear axle for forward, high speed (range gear H) and main shift 1st gear? (0.02291 calculated from page 2-10)
REAR BRAKE AXLE
0.033872 = 1.478 0.02291 Rolling circumference of front wheels x rotating = ratio Rolling circumference of rear wheels
Therefore, the relative speed ratio for front wheel = (speed of front wheels ÷ speed of rear wheels) Example) What is the relative speed ratio of the front wheels for RX6010C(PC)/USA model tires based on the above formula? Front/rear wheel rotating ratio = 1.478 Circumference of front wheel = 2.870
REAR HST AXLE
TRANSMI TRANSMISSION SSION
CLUTCH CLUTCH
ENGINE ENGINE
Since Front Front axle wheel rospeed retating ratio duction ratio = , so Rear Rear axle wheel rospeed retating ratio duction ratio
Circumference of rear wheel = 4.140
2.870 x 1.478 4.140
1.025 → The front wheels = rotate 2.5% faster than the rear wheels.
Example) What is the relative speed ratio of the front wheels for RX6010C(PC)/AU,EU model tires based on the above formula? Front/rear wheel rotating ratio = 1.478 Circumference of front wheel = 2.985 Circumference of rear wheel = 4.178
2.985 x 1.478 4.178
1.056 → The front wheels = rotate 5.6% faster than the rear wheels.
The tire rolling circumference in the tire catalogue supplied by the manufacturer may differ from the actual rolling circumference. Therefore, follow below procedures to measure the actual rolling circumference.
3. Disengage the front wheel drive.
A/C AND HEATER INDEX
A/CCABIN & HEATER
ELECTRIC SYSTEM CABIN
HYDRAULIC ELECTRIC & CALIBRATION SYSTEM
STEERING FRONT SYSTEM AXLE
7.2 Method of measuring circumference
HYDRAULIC STEERING SYSTEM SYSTEM
FRONT BRAKE AXLE
RX6010C(PC)
▶ Calculate the gear reduction ratio of the rear axle referring to the arrangement table of the main gear shift and rear axle gears in 6.1.1.
GENERAL GENERAL
SAFETY SAFETY FIRST FIRST
GENERAL - RELATIVE SPEED RATIO OF FRONT WHEELS
1. Adjust the inflation pressure of the front and rear tires to the specified pressure. 2. Park the tractor on a firm and level ground. 4. Mark on the rear tire and the ground where they meet. 5. Move the tractor until the marks on the tires meet the ground again. Be sure to move the tractor straight. 6. Make a second mark on the ground where the mark of tire meets. 7. Measure the distance between two marks on the ground. 8. The rolling circumference for the front tires can be measured with the same method. However, the front wheel drive function should be disengaged. 9. Calculate the relative speed ratio of the front wheels based on the measured rolling circumference value as follows: Front wheel rolling circ. x speed ratio x 100% Rear wheel rolling circ. 10. If necessary, install the most frequently used implement or a weight and repeat the same test. 11. If the relative speed ratio of the front wheels is over the specified value, check the tires for inflation pressure, deformation and specifications. • Specified relative speed ratio for front wheels: 1 ~ 5% • Allowable relative speed ratio for front wheels: -1 ~ 7%
2-14
영M55(RX6010)_02장_일반.indd 14
DH80-W00 Aug. 2011
2011-11-01 오후 5:33:00
Thank you very much for your reading. Please Click Here Then Get More Information.