Last Modif ied: 3 - 9 - 2 0 1 0
6 .4 A
From: 2 0 0 9 1 1
Model Year: 2 0 1 0
Model: V enza
Doc ID: RM 0 0 0 0 0 1 Y M M 0 1 H X
Title: 1 A R- FE C O O L I N G : C O O L A N T : RE P L A C E M E N T (2 0 1 0 V enza)
REPLACEMENT 1. REMOVE NO. 1 ENGINE UNDER COVER 2. REMOVE NO. 2 ENGINE UNDER COVER 3. DRA IN ENGINE COOLA NT (a) L oos en the radiator drain c oc k plug and drain the c oolant. NOTICE: Do not remove the reserve tank cap, cylinder block drain cock plugs and radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
HINT: Collect the coolant in a container and dispose of it according to the regulations in your area.
(b) Remove the radiator c ap s ub- as s embly from the radiator as s embly. (c ) L oos en the c ylinder bloc k drain c oc k plug.
Text in Illustrat ion *1
Radiator C ap Sub- as s embly
*2
C ylinder Bloc k D rain C oc k P lug
*3
Radiator D rain C oc k P lug
-
-
4. A DD ENGINE COOLA NT (a) T ighten the radiator drain c oc k plug by hand. (b) T ighten the c ylinder bloc k drain c oc k plug. Torque: 13 N¡m (130 kgf ¡cm, 9f t ¡lbf ) (c ) Slowly fill the radiator with T O Y O T A Super L ong L ife C oolant (SL L C ). Standard C apac ity: 7 .1 liters (7 .5 U S qts , 6 .2 lmp. qts ) HINT: T O Y O T A vehic les are filled with T O Y O T A SL L C at the fac tory. I n order to avoid damage to the engine c ooling s ys tem and other tec hnic al problems , only us e T O Y O T A SL L C or s imilar high quality ethylene glyc ol bas ed non- s ilic ate, non- amine, non- nitrite, non- borate c oolant with long- life hybrid organic ac id tec hnology (c oolant with long- life hybrid organic ac id tec hnology is a c ombination of low phos phates and organic ac ids ). C ontac t your T O Y O T A dealer for further details . NOTICE: Never use water as a substitute for engine coolant.
(d) Slowly pour c oolant into the radiator res ervoir tank until it reac hes the full line.
Text in Illustration *1
Full L ine
(e) Squeeze the N o. 1 and N o. 2 radiator hos es s everal times by hand, and then c hec k the level of the c oolant. I f the c oolant level is low, add c oolant. (f) Bleed air from the c ooling s ys tem. (1 ) Warm up the engine until the thermos tat opens . While the thermos tat is open, c irc ulate the c oolant for s everal minutes . HINT: The thermostat open timing can be confirmed by squeezing the No. 2 radiator hose by hand, and checking when the engine coolant starts to flow inside the hose.
(2 ) M aintain the engine s peed at 2 5 0 0 to 3 0 0 0 rpm. (3 ) Squeeze the inlet and N o. 1 and N o. 2 radiator hos es s everal times by hand to bleed air. CA UTION:
When squeezing the radiator hoses:
Wear protec tive gloves . Be c areful as the radiator hos es are hot. Keep your hands away from the c ooling fans . NOTICE: M ake s ure that the radiator res ervoir s till has s ome c oolant in it. I f the c oolant temperature gauge indic ates an exc es s ive temperature, turn off the engine and let it c ool. I f there is not enough c oolant, the engine may overheat or be s erious ly damaged. I f the radiator res ervoir does not have enough c oolant, perform the following: 1 ) s top the engine, 2 ) wait until the c oolant has c ooled down, and 3 ) add c oolant until the res ervoir is filled to the full line. (g) Stop the engine and wait until the engine c oolant c ools down. (h) A dd engine c oolant to the full line on the radiator res ervoir.
5. INSPECT FOR COOLA NT LEA K 6. INSTA LL NO. 2 ENGINE UNDER COVER 7. INSTA LL NO. 1 ENGINE UNDER COVER
Last Modif ied: 3 - 9 - 2 0 1 0
6 .4 A
From: 2 0 0 9 1 1
Model Year: 2 0 1 0
Model: V enza
Doc ID: RM 0 0 0 0 0 1 Y M M 0 1 I X
Title: 2 G R- FE C O O L I N G : C O O L A N T : RE P L A C E M E N T (2 0 1 0 V enza)
REPLACEMENT 1. REMOVE V-BA NK COVER SUB-A SSEMBLY 2. REMOVE NO. 1 ENGINE UNDER COVER 3. REMOVE NO. 2 ENGINE UNDER COVER 4. DRA IN ENGINE COOLA NT (a) L oos en the radiator drain c oc k plug and drain the c oolant. NOTICE: Do not remove the reserve tank cap, cylinder block drain cock plugs and radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
HINT: Collect the coolant in a container and dispose of it according to the regulations in your area.
(b) Remove the radiator c ap s ub- as s embly from the radiator as s embly. (c ) L oos en the 2 c ylinder bloc k drain c oc k plugs .
Text in Illustrat ion
*1
A ir D rain C oc k P lug
*2
Radiator C ap Sub- as s embly
*3
C ylinder Bloc k D rain C oc k P lug
*4
Radiator D rain C oc k P lug
5. A DD ENGINE COOLA NT (a) T ighten the radiator drain c oc k plug by hand. (b) T ighten the 2 c ylinder bloc k drain c oc k plugs . Torque: 13 N·m (130 kgf ·cm, 9f t ·lbf ) (c ) L oos en the air drain c oc k plug on the water inlet hous ing. (d) A dd T O Y O T A Super L ong L ife C oolant (SL L C ) to the radiator inlet opening until c oolant overflows from the air drain c oc k hole. T hen tighten the air drain c oc k plug to the water inlet hous ing. Torque: 13 N·m (130 kgf ·cm, 9f t ·lbf ) (e) Slowly fill the radiator with T O Y O T A Super L ong L ife C oolant (SL L C ). Standard capacit y w/o E ngine oil c ooler
9 .8 liters (1 0 .4 U S qts , 8 .6 lmp. qts )
w/ E ngine oil c ooler
1 0 .0 liters (1 0 .6 U S qts , 8 .8 lmp. qts )
HINT: T O Y O T A vehic les are filled with T O Y O T A SL L C at the fac tory. I n order to avoid damage to the engine c ooling s ys tem and other tec hnic al problems , only us e T O Y O T A SL L C or s imilar high quality ethylene glyc ol bas ed non- s ilic ate, non- amine, non- nitrite, non- borate c oolant with long- life hybrid organic ac id tec hnology (c oolant with long- life hybrid organic ac id tec hnology is a c ombination of low phos phates and organic ac ids ). C ontac t your T O Y O T A dealer for further details . NOTICE: Never use water as a substitute for engine coolant.
(f) Slowly pour c oolant into the radiator res ervoir tank until it reac hes the Full line.
Text in Illustration *1
Full L ine
(g) Squeeze the N o. 1 and N o. 2 radiator hos es s everal times by hand, and then c hec k the level of the c oolant. I f the c oolant level is low, add c oolant. (h) Bleed air from the c ooling s ys tem.
(1 ) Warm up the engine until the thermos tat opens . While the thermos tat is open, c irc ulate the c oolant for s everal minutes . HINT: The thermostat open timing can be confirmed by squeezing the No. 2 radiator hose by hand, and checking when the engine coolant starts to flow inside the hose.
(2 ) M aintain the engine s peed at 2 5 0 0 to 3 0 0 0 rpm. (3 ) Squeeze the inlet and N o. 1 and N o. 2 radiator hos es s everal times by hand to bleed air. CA UTION: When squeezing the radiator hoses:
Wear protec tive gloves . Be c areful as the radiator hos es are hot. Keep your hands away from the c ooling fans . NOTICE: M ake s ure that the radiator res ervoir s till has s ome c oolant in it. I f the c oolant temperature gauge indic ates an exc es s ive temperature, turn off the engine and let it c ool. I f there is not enough c oolant, the engine may overheat or be s erious ly damaged. I f the radiator res ervoir does not have enough c oolant, perform the following: 1 ) s top the engine, 2 ) wait until the c oolant has c ooled down, and 3 ) add c oolant until the res ervoir is filled to the full line. (i) Stop the engine and wait until the engine c oolant c ools down. (j) A dd engine c oolant to the Full line on the radiator res ervoir.
6. INSPECT FOR COOLA NT LEA K 7. INSTA LL NO. 2 ENGINE UNDER COVER 8. INSTA LL NO. 1 ENGINE UNDER COVER 9. INSTA LL V-BA NK COVER SUB-A SSEMBLY
Last Modif ied: 3 - 9 - 2 0 1 0
6 .4 G
From: 2 0 0 9 1 1
Model Year: 2 0 1 0
Model: V enza
Doc ID: RM 0 0 0 0 0 0 Y FK0 2 V X
Title: 2 G R- FE C O O L I N G : C O O L I N G FA N E C U : O N - V E H I C L E I N SP E C T I O N (2 0 1 0 V enza)
ON-VEHICLE INSPECTION 1. INSPECT COOLING FA N ECU (a) P ut the vehic le in the following c onditions : (1 ) T urn the ignition s witc h off. (2 ) T he c oolant temperature is les s than 9 5 °C (2 0 3 °F). (3 ) T he battery voltage is between 9 and 1 4 V . (4 ) T he A /C s witc h is off. (b) C lamp the 4 0 0 A probe of an ammeter over the M + wire of eac h c ooling fan motor. (c ) T urn the ignition s witc h to O N and wait for approximately 1 0 s ec onds . C hec k that the fans s top. (d) Start the engine. C hec k that the fans are s topped with the engine idling. HINT: M ake s ure that the engine c oolant temperature is les s than 9 5 °C (2 0 3 °F). M ake s ure that the A /C s witc h is off. (e) C hec k that the fans operate when the A /C s witc h is turned on (M A X C O O L and the magnetic c lutc h is operating). Standard C urrent: ITEM
SP E C I FI E D C O N D I T I O N
C ooling fan motor
2 to 8 A
N o. 2 c ooling fan motor
2 to 8 A
HINT: The coolant temperature should be less than 95°C (203°F).
(f) C hec k that the fans operate when the engine c oolant temperature s ens or c onnec tor is dis c onnec ted. Standard C urrent: ITEM
SP E C I FI E D C O N D I T I O N
C ooling fan motor
2 to 1 1 A
N o. 2 c ooling fan motor
2 to 1 1 A
(g) A fter the engine is warmed up, c hec k that the fans operate as s hown in the illus tration.
HINT: T he c oolant temperature at whic h the fans s tart operating is approximately 9 7 °C (2 0 7 °F). T his s ys tem c an als o be c hec ked us ing the T ec hs tream. E nter the following menus : P owertrain / E ngine / D ata L is t / C oolant T emp.
Last Modif ied: 3 - 9 - 2 0 1 0
6 .4 K
From: 2 0 0 9 1 1
Model Year: 2 0 1 0
Model: V enza
Doc ID: RM 0 0 0 0 0 1 X9 A 0 0 XX
Title: 1 A R- FE C O O L I N G : C O O L I N G FA N M O T O R: C O M P O N E N T S (2 0 1 0 V enza)
COMPONENTS ILLUSTRATION
Last Modif ied: 3 - 9 - 2 0 1 0
6 .4 G
From: 2 0 0 9 1 1
Model Year: 2 0 1 0
Model: V enza
Doc ID: RM 0 0 0 0 0 2 0 2 U 0 1 1 X
Title: 1 A R- FE C O O L I N G : C O O L I N G FA N M O T O R: O N - V E H I C L E I N SP E C T I O N (2 0 1 0 V enza)
ON-VEHICLE INSPECTION 1. INSPECT COOLING FA N MOTOR
(a) C hec k that the motor operates s moothly when the battery is c onnec ted to the c ooling fan motor c onnec tor.
Text in Illustration
*1
C omponent without harnes s c onnec ted (C ooling fan motor)
I f the motor does not operate s moothly, replac e the c ooling fan motor.
(b) C onnec t the pic kup of a c lamp- on ammeter over one of the 2 wires for the c ooling fan motor. (c ) M eas ure the c urrent while the motor is operating. Standard C urrent: ITEM
C O NDIT IO N
SP E C I FI E D C O N D I T I O N
C ooling fan motor (w/o T owing pac kage)
2 0 째C (6 8 째F)
1 1 .8 to 1 4 .8 A at 1 2 V
C ooling fan motor (w/ T owing pac kage)
2 0 째C (6 8 째F)
7 .9 to 1 0 .9 A at 1 2 V
I f the res ult is not as s pec ified, replac e the c ooling fan motor.
2. INSPECT NO. 2 COOLING FA N MOTOR
(a) C hec k that the motor operates s moothly when the battery is c onnec ted to the N o. 2 c ooling fan motor c onnec tor.
Text in Illustration
*1
C omponent without harnes s c onnec ted (N o. 2 c ooling fan motor)
I f the motor does not operate s moothly, replac e the N o. 2 c ooling fan motor.
(b) C onnec t the pic kup of a c lamp- on ammeter over one of the 2 wires for the N o. 2 c ooling fan
motor. (c ) M eas ure the c urrent while the motor is operating. Standard C urrent: ITEM
C O NDIT IO N
SP E C I FI E D C O N D I T I O N
N o. 2 c ooling fan motor (w/o T owing pac kage)
2 0 째C (6 8 째F)
7 .9 to 1 0 .9 A at 1 2 V
N o. 2 c ooling fan motor (w/ T owing pac kage)
2 0 째C (6 8 째F)
7 .9 to 1 0 .9 A at 1 2 V
I f the res ult is not as s pec ified, replac e the N o. 2 c ooling fan motor.
Last Modif ied: 3 - 9 - 2 0 1 0
6 .4 A
From: 2 0 0 9 1 1
Model Year: 2 0 1 0
Model: V enza
Doc ID: RM 0 0 0 0 0 1 X9 8 0 1 8 X
Title: 1 A R- FE C O O L I N G : C O O L I N G FA N M O T O R: I N ST A L L A T I O N (2 0 1 0 V enza)
INSTALLATION 1. INSTA LL NO. 2 COOLING FA N MOTOR
(a) I ns tall the N o. 2 c ooling fan motor with the 3 s c rews . w/o Towing package - Torque: 2.6 N·m (26 kgf ·cm, 23in·lbf ) w/ Towing package - Torque: 3.9 N·m (40 kgf ·cm, 35in·lbf )
(b) C onnec t the N o. 2 c ooling fan motor c onnec tor and 2 c lamps .
2. INSTA LL COOLING FA N MOTOR
(a) I ns tall the c ooling fan motor with the 3 s c rews . w/o Towing package - Torque: 2.6 N·m (26 kgf ·cm, 23in·lbf ) w/ Towing package - Torque: 3.9 N·m (40 kgf ·cm, 35in·lbf )
3. INSTA LL COOLING FA N MOTOR INSULA TOR
(a) I ns tall the c ooling fan motor ins ulator with the 2 bolts . Torque: 2.6 N·m (26 kgf ·cm, 23in·lbf )
4. INSTA LL NO. 2 FA N
(a) I ns tall the N o. 2 fan with the nut.
Torque: 6.3 N·m (64 kgf ·cm, 56in·lbf )
5. INSTA LL FA N
(a) I ns tall the fan with the nut. Torque: 6.3 N·m (64 kgf ·cm, 56in·lbf )
6. INSTA LL RA DIA TOR A SSEMBLY A ND FA N A SSEMBLY WITH MOTOR HINT:
Last Modif ied: 3 - 9 - 2 0 1 0
6 .4 A
From: 2 0 0 9 1 1
Model Year: 2 0 1 0
Model: V enza
Doc ID: RM 0 0 0 0 0 1 X9 B0 1 7 X
Title: 1 A R- FE C O O L I N G : C O O L I N G FA N M O T O R: RE M O V A L (2 0 1 0 V enza)
REMOVAL 1. REMOVE RA DIA TOR A SSEMBLY A ND FA N A SSEMBLY WITH MOTOR HINT:
2. REMOVE FA N
(a) Remove the nut and fan.
3. REMOVE NO. 2 FA N
(a) Remove the nut and N o. 2 fan.
4. REMOVE COOLING FA N MOTOR INSULA TOR
(a) Remove the 2 bolts and c ooling fan motor ins ulator.
5. REMOVE COOLING FA N MOTOR
(a) Remove the 3 s c rews and c ooling fan motor.
6. REMOVE NO. 2 COOLING FA N MOTOR
(a) D is c onnec t the N o. 2 c ooling fan motor c onnec tor and 2 c lamps .
(b) Remove the 3 s c rews and N o. 2 c ooling fan motor.
Thank you very much for your reading. Please Click Here Then Get More Information.