WORKSHOP MANUAL
KUBOTA EXCAVATOR
U17-3
Code No.97899-61952
Record of Revisions Symbol
Date
Main Revised Points & Corrective Measures
Person-in-charge
Aug. 2008
Maintenance intervals EU - version revised.
I. Okae
Oct. 2008
Correction of descriptions on: 1. Engine model name for EU - version 2. Retractable track frame
I. Okae
1
2
3
4
U17-3Îą is the model name of EU - version U17/U17-3 is the model name of KTC, KCL and KTA - version
CONTENTS I.
GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-S-1
II. MACHINE BODY • Mechanism Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-M-1 • Service Section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-S-1
III. ENGINE • Mechanism Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . III-M-1 • Service Section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . III-S-1
IV. HYDRAULIC SYSTEM • Mechanism Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IV-M-1 • Service Section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IV-S-1
V. ELECTRICAL SYSTEM • Mechanism Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V-M-1 • Service Section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V-S-1
WSM U17-3α/U17-3/U17
I.
I. GENERAL
GENERAL
A. BODY AND ENGINE IDENTIFICATION MARKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-S-3 B. SAFETY PRECAUTIONS FOR SERVICING, DISASSEMBLY AND REASSEMBLY . I-S-5 a. b. c. d.
Safety Measures Before Starting Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Measures During Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparation for Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Precautions for Disassembly and Reassembly . . . . . . . . . . . . . . . . . . . . . . . . . . .
I-S-5 I-S-5 I-S-6 I-S-6
C. IMPORTANT SAFETY PROCESS AND CRITICAL FUNCTIONAL PROCESS . . . . . I-S-7 D. IMPORTANT INSPECTION ITEMS AFTER REASSEMBLING. . . . . . . . . . . . . . . . . . I-S-9 a. Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-S-9
E. MAINTENANCE INTERVALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-S-15 a. b. c. d. e. f. g. h. i.
EU-version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PP (KTC, KCL)-version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KTA-version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic Oil Check for Machines with Hydraulic Breakers . . . . . . . . . . . . . . . . . . Maintenance Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubleshooting for Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Periodic Replacement of Important Component Parts . . . . . . . . . . . . . . . . . . . . . . Recommended Oils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lifting Capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I-S-15 I-S-17 I-S-19 I-S-20 I-S-21 I-S-23 I-S-24 I-S-25 I-S-26
F. PRODUCT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-S-31 a. b. c. d. e.
U17-3α Development Concept. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Why Minor Change? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Major Sales Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications Comparison. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I-S-1
I-S-31 I-S-31 I-S-32 I-S-33 I-S-34
1 1
WSM U17-3α/U17-3/U17
I. GENERAL
I-S-2
WSM U17-3α/U17-3/U17
I. GENERAL
A. BODY AND ENGINE IDENTIFICATION MARKS If trouble occurs during use, or servicing is necessary, contact your dealer. Pass on your machine model, engine type and serial number to them.
Example: S/N 10001
No.
1 2 3 4 5 6 7 8
Items
Contents
MODEL
U17-3α
SERIAL No.
10001
MASS
1650
MAX, DRAW BAR PULL
32.3
POWER
11.6
MAX,VERT,LOAD
2.7
PRODUCT IDENTIFICATION NUMBER >JKUU0173*01S10001< MANUFACTURED YEAR
2008
EU-version
No.
1 2 3 4
Name plate: Code No. RA018-57721
I-S-3
Items
Contents
Machine model
U17-3α
Serial No.
10001
Engine No. PRODUCT IDENTIFICATION No. >JKUU0173*01S10001<
WSM U17-3α/U17-3/U17
I. GENERAL
(1) Machine serial number
(1) Serial No. (2) Engine serial number The engine serial number is an identified number for the engine. It is marked after the engine model number. It indicates month and year of manufacture as follows. e.g. D902-8L001 “8” indicates year of 2008 and “L” indicates June. So, 8L indicates that the engine was manufactured in June 2008.
(1) Engine serial No. Month of manufacture
Year of manufacture Alphabet or Number
Year
Alphabet or Number
Year
1
2001
F
2015
January
A0001 ~ A9999
B10000 ~
2
2002
G
2016
February
C0001 ~ C9999
D10000 ~
3
2003
H
2017
March
E0001 ~ E9999
F10000 ~
4
2004
J
2018
April
G0001 ~ G9999
H10000 ~
5
2005
K
2019
May
J0001 ~ J9999
K10000 ~
6
2006
L
2020
June
L0001 ~ L9999
M10000 ~
7
2007
M
2021
July
N0001 ~ N9999
P10000 ~
8
2008
N
2022
August
Q0001 ~ Q9999
R10000 ~
9
2009
P
2023
September
S0001 ~ S9999
T10000 ~
A
2010
R
2024
October
U0001 ~ U9999
V10000 ~
B
2011
S
2025
November
W0001 ~ W9999
X10000 ~
C
2012
T
2026
December
Y0001 ~ Y9999
Z10000 ~
D
2013
V
2027
E
2014
Month
A: Engine Model Name and Serial Number
I-S-4
Engine Serial Number 0001 ~ 9999
10000 ~
WSM U17-3Îą/U17-3/U17
I. GENERAL
B. SAFETY PRECAUTIONS FOR SERVICING, DISASSEMBLY AND REASSEMBLY Safety precautions for servicing Most accidents during servicing arise from carelessness. Please remember that safety involves both the welfare of the employees and improved work efficiency.
Safety precautions for disassembly and reassembly Machines must be disassembled and assembled efficiently and safely. It is very important to thoroughly understand the construction and function of the machine, to make all appropriate preparations, and start operations according to the specified working procedures.
a. Safety Measures Before Starting Work (1) Work clothes
(2) Team work
1. Wear specified work cap and clothed. (Under no circumstances may workers wear undershirts only.) Cuffs must be kept buttoned, and any tears must be mended.) 2. Wear safety shoes. 3. Do not wear cotton gloves when working on the internal section of engine, reduction gears or hydraulic units for repair or others, or when using a hammer. Wear leather gloves, however, when hoisting wires.
(2) Inspecting equipment and tools 1. Prepare equipment (cranes, fork lifts, tool, etc.) required for servicing and inspect for any problems before starting work. 2. Hammer heads (metal parts) must be firmly secured to their handles. 3. Check hosting tools (wire ropes, hoisting chains, etc.) before use.
(3) Set workshop in order 1. Secure appropriate space needed for disassembly. 2. Secure a clean, safe place for arranging disassembled parts. 3. Store volatile substances (gasoline, light oil, thinner, oily articles, etc.) in appropriate containers at selected locations to prevent fire hazards.
b. Safety Measures During Work (1) Protectors 1. Wear goggles when using chisels for chipping. 2. Use appropriate protectors during welding. 3. Wear a helmet when working with a crane or at elevated locations. I-S-5
1. When working with two or more people, divide the work and maintain close communication. 2. Crane work must be carried out using predetermined signals.
(3) Disassembly and assembly 1. Do not wear gloves when using hammers. 2. Use rods of the specified soft material for removing pins. Do not use a hammer as a pad. 3. Do not place fingers in holes when centering. 4. Heavy parts must be adequately supported before removing bolts.
(4) Cranes 1. Basically, use a crane for objects heavier than 44lb (20kg). 2. Crane operation and hoisting must be performed only by qualified personnel. 3. Pay careful attention to the center of gravity when hoisting, and do not stand under the lifted objects.
(5) Others 1. To work under a jacked-up carrier, be sure to place wood pieces underneath. 2. When charging batteries, make sure there are no open flames in the immediate vicinity. 3. All electric tools must be grounded. 4. Before welding the machine, remove the battery. â&#x20AC;˘ When removing the battery, be sure to disconnect negative (-) cord first. â&#x20AC;˘ When mounting the battery, be sure to connect the positive (+) cord first.
WSM U17-3α/U17-3/U17
I. GENERAL
c. Preparation for Disassembly (1) Cleaning Remove mud and dirt from the body before disassembly.
(2) Acceptance inspection The machine must be checked before it is disassembled to record existing conditions, such as those listed below. Model, serial number, and hourmeter reading • Reason for repair and repair history • Element stains • Fuel and oil condition • Parts damage *(Take photographs if necessary.)
(3) Equipment and tools Prepare equipment, tools, cranes and parts storage racks as required.
d. Precautions for Disassembly and Reassembly (1) Disassembly 1. Follow the specified disassembly procedures. 2. Make alignment marks to insure correct reassembly. 3. Arrange disassembled parts in an orderly way, and attach identification tags or put marks if needed.
(2) Reassembly 1. Clean all parts before assembly. Repair any scratches or dents. Take special precautions against dirt and dust. 2. Parts with rust-preventive coatings must be assembles only after removing the coating. 3. Separated parts must be correctly reassembled using alignment marks. 4. As a rule, use a press to reassembled bearings, bushing and oil seals. Use pads when using a hammer.
e. Maintenance CAUTION When adding oil and servicing: 1. Park the machine on a large, flat place. 2. Place the bucket and dozer on the ground. 3. Stop the engine 4. Move the attachment control lever and dozer lever to make sure the remaining pressure is relieved. 5. Draw out the starter key and check around the machine for safety. Before starting the job, carefully read the Operational Manual in " ! Servicing Precautions" on the yellow pages.
f. Waste Disposal WARNING Do not carelessly throw away and burn waste materials. Such actions may lead to environmental pollution and punishment by local laws. When disposing of waste: * Let out waste fluid from the machine into a container. * Do not let waste fluid flow on the ground as well as into a river, lake, marsh, and sea. * Contact your dealer or a qualified industrial waste handler to treat (dispose of or incinerate) harmful waste materials. Those materials include waste oil, fuel, cooling water (anti-freeze), coolant, solvent, filters, batteries, rubber and other toxic substances. I-S-6
WSM U17-3α/U17-3/U17
I. GENERAL
C. IMPORTANT SAFETY PROCESS AND CRITICAL FUNCTIONAL PROCESS The following instructions are related to essential adhesives, important safety process
S
and critical func-
tional process A . Pay special attention in servicing these process. (Pay also close attention in reconnecting the electrical cables.)
1. Essential Adhesives Screw adhesive type: • Unless otherwise specified, use Three-Bond 1324 adhesive (medium-duty type). Keep the screw threads free of oil and water. Instantaneous adhesive: • Use Three-Bond 1733 or Three-Bond 1741E adhesive. Keep the bond areas free of oil and water.
2. Important Safety Process
S
1. Reconnecting the fuel hose (clearance, hose routes, clamps, etc.) 2. Electrical cabling (engine, instrument panal, controls, etc.) (wiring routes, clamps and couplers)
3. Important Critical Functional Process 1. 2. 3. 4.
A
Setting up the travel wheel motor (tightening torque) Reassembling the rotary joints (joint direction and shaft set-up) Installing the swivel base bearing and the swivel motor (tightening torque) Fitting the pump couplings (tightening torque)
I-S-7
WSM U17-3α/U17-3/U17
I. GENERAL
I-S-8
WSM U17-3α/U17-3/U17
I. GENERAL
D. IMPORTANT INSPECTION ITEMS AFTER REASSEMBLING 1. Operate the Machine and Check for Unusual Noise and Vibrations. 2. Make Sure the Safety Decals and Wireharness Clamps Are in Their Specified Positions. 3. With the Machine Front in a Specified Posture, Check the Amount of Hydraulic Oil Checking the oil level (For further datails, refer to the Operator’s Manual of each model.) 1) Park the machine on a level ground. 2) Make sure the hydraulic oil temperature is in the range of 10-30°C (50-86°F) and see if the oil level is within the specified zone of the oil level gauge. 3) Extend the track cylinder to Max. position. 4) Keep the machine front as shown as following posture. Posture:Extend the rods of the arm and bucket cylinders to max. Place the bucket link on the ground, the offset swing at the center, and the dozer also on the ground. Oil gauge (level) Red circle
Specified machine posture
Some space needed
Leftward swinging
a. Piping (1) General precautions • Tighten the pipe socket to the specified torque. If too tight, the socket itself or a hydraulic component may get damaged. It too loose, an oil leak may result. • In connecting a new hose or pipe, tighten its nut first to the specified torque and then turn it back (about 45°). Then tighten it again to the specified torque. (Do not this to the sealing tape-applied hose or pipe.) • When disconnecting a vertical hose or pipe, separate its bottom connection first. • In desconnecting and reconnecting the hose and pipe, be sure to use two wrenches. With one wrench, restrain the mating part to allow no twist. • Check the mating connector’s sleeve and the hose’s taper for dust deposits and scratches. • When the pipe socket has been tightened up, wipe the joint clean. Apply the maximum operating pressure 2 or 3 times to make sure there is no oil leak.
(2) Hydraulic hose Check the hydraulic hose for too tight a connect or twist. * Excessively tight contact Let’s suppose that a hose is in contact with another hose or other part. If the hose is pulled away by a force of 2 kg but still in contact, it means the contact is too tight.
I-S-9
WSM U17-3α/U17-3/U17
I. GENERAL
(3) Precautions in tightening the bolts and nuts • Use bolts of specified length. • Do not over tighten the bolts: Its threads may get deformed or the fixed part may get damaged. Do not undertighten the bolt either: It may get loose. • In other words, tighten the bolt to the specified torque. • Tighten the bolts and nuts diagonally for even tightness.
Joint body
Nut Sleeve
R (Tapered thread) G (Straight thread)
Steel pipe
Tapered thread
Union nut
I-S-10
WSM U17-3α/U17-3/U17
I. GENERAL
(4) Hose screw
Metric Size Hose Tightening torque N·m kgf·m ft·lbf
Thread size (piping screw)
Wrench size (reference)
Thread size (piping screw)
Torque N·m kgf·m ft·lbf
M12 × 1.5
20 ~ 30 2.0 ~ 3.1 14.75 ~ 22.13
Union nut section
Taper thread section
1/8”
7.8 ~ 11.8 N·m 0.8 ~ 1.2 kgf·m 5.8 ~ 8.7 ft·lbf
14.71 ~ 19.61 N·m 1.5 ~ 20 kgf·m 10.85 ~ 14.47 ft·lbf
17 mm 0.67 in
M14 × 1.5
20 ~ 30 2.0 ~ 3.1 14.75 ~ 22.13
1/4”
24.5 ~ 29.4 2.5 ~ 3.0 18.1 ~ 21.7
36.3 ~ 44.1 3.7 ~ 4.5 26.8 ~ 32.5
19 mm 0.75 in
M16 × 1.5
30 ~ 50 3.1 ~ 5.1 22.13 ~ 36.9
3/8”
49.0 ~ 53.9 5.0 ~ 5.5 36.2 ~ 39.8
49.0 ~ 68.6 5.0 ~ 7.0 36.2 ~ 50.6
22 mm 0.87 in
M18 × 1.5
30 ~ 50 3.1 ~ 5.1 22.13 ~ 36.9
1/2”
58.8 ~ 63.7 6.0 ~ 6.5 43.4 ~ 47.0
83.4 ~ 88.3 8.5 ~ 9.0 61.5 ~ 65.1
27 mm 1.06 in
M22 × 1.5
40 ~ 60 4.1 ~ 6.1 29.5 ~ 44.25
3/4”
117.7 ~ 127.5 12.0 ~ 13.0 86.8 ~ 94.0
127.5 ~ 147.1 13.0 ~ 15.0 94.0 ~ 108.5
36 mm 1.42 in
1”
137.3 ~ 147.1 14.0 ~ 15.0 101.3 ~ 108.5
147.1 ~ 166.7 15.0 ~ 17.0 108.5 ~ 123.0
41 mm 1.61 in
(5) Joint bodies Tightening torque N·m kgf·m ft·lbf
Thread size (piping screw)
Spanner size (reference)
Remarks Steel pipe (OD)
R (tapered thread)
G (straight thread)
1/8”
19.6 ~ 29.4 N·m 2.0 ~ 3.0 kgf·m 14.5 ~ 21.7 ft·lbf
-
17 mm 0.67 in
8 mm 0.31 in
1/4”
36.3 ~ 44.1 3.7 ~ 4.5 26.8 ~ 32.5
W/O-ring Joint Torque 58.8 ~ 78.5 6~8 43.4 ~ 57.9
19 mm 0.75 in
12 mm 0.47 in
3/8”
39.2 ~ 49.0 4.0 ~ 5.0 28.9 ~ 36.2
W/O-ring Joint Torque 78.5 ~ 98.1 8 ~ 10 57.9 ~ 72.3
23 mm 0.91 in
1/2”
49.0 ~ 68.6 5.0 ~ 7.0 36.2 ~ 50.6
W/O-ring Joint Torque 117.7 ~ 137.3 12 ~ 14 86.8 ~ 101.3
26 mm 1.02 in
I-S-11
When in steel pipe is in use.
15 mm 0.59 in
16 mm 0.63 in
WSM U17-3α/U17-3/U17
I. GENERAL
(6) Tightening torque table for hose clamp (Screw type) Tightening torque N·m kgf·m ft·lbf
No.
Dia. (mm)
Code No.
1
Ø12 ~ 16
09318-89016
2
Ø19 ~ 25
09318-89024
3
Ø31 ~ 40
09318-89039
4
Ø36 ~ 46
09318-89045
5
Ø15 ~ 25
RC101-64580
6
Ø26 ~ 38
68311-72820
7
Ø13 ~ 20
RB101-63630
8
Ø40 ~ 55
RC411-63180
9
Ø77 ~ 95
69284-63170
10
Ø50 ~ 60
RC401-63190
11
Ø32 ~ 44
RD411-63820
12
Ø32 ~ 51
68311-72830
2.5 ~ 3.4 25 ~ 35 1.84 ~ 2.51 4.9 ~ 5.9 50 ~ 60 3.61 ~ 4.35 3.4 ~ 4.4 35 ~ 45 2.58 ~ 3.31
4.9 ~ 5.9 50 ~ 60 3.61 ~ 4.35
(7) Nuts for piping Steel pipe size (O.D. × I.D. × Thickness)
Tightening torque N·m kgf·m ft·lbf
Spanner size (reference)
8 × 6 × 1 mm 0.31 × 0.24 × 0.04 in
29.4 ~ 39.2 3.0 ~ 4.0 21.7 ~ 28.9
17 mm 0.67 in
10 × 7 × 1.5 mm 0.39 × 0.28 × 0.06 in
39.2 ~ 44.1 4.0 ~ 4.5 28.9 ~ 32.5
19 mm 0.75 in
12 × 9 × 1.5 mm 0.47 × 0.35 × 0.06 in
53.9 ~ 63.7 5.5 ~ 6.5 39.7 ~ 47.0
21 mm 0.83 in
16 × 12 × 2 mm 0.63 × 0.47 × 0.08 in
88.3 ~ 98.1 9.0 ~ 10.0 65.1 ~ 72.3
29 mm 1.14 in
18 × 14 × 2 mm 0.71 × 0.55 × 0.08 in
127.5 ~ 137.3 13.0 ~ 14.0 94.0 ~ 101.3
32 mm 1.26 in
27.2 × 21.6 × 2.8 mm 1.07 × 0.85 × 0.11 in
235.4 ~ 254.97 24.0 ~ 16.0 173.6 ~ 188.1
41 mm 1.61 in
I-S-12
Remarks
When sleeve nut is in use.
WSM U17-3α/U17-3/U17
I. GENERAL
(8) Tightening torque of bolts and nuts Refer to the tightness torque table below. Bolts, Nuts
4T
7T
9T
Nomial Dia. SS41
S40C, S45C
SCr4
M6
7.8 ~ 9.3 N·m 0.80 ~ 0.95 kgf·m 5.8 ~ 6.9 ft·lbf
9.8 ~ 11.3 N·m 1.00 ~ 1.15 kgf·m 7.2 ~ 8.3 ft·lbf
12.3 ~ 14.2 N·m 1.25 ~ 1.45 kgf·m 9.0 ~ 10.5 ft·lbf
M8
17.7 ~ 20.6 N·m 1.80 ~ 2.10 kgf·m 13.0 ~ 15.2 ft·lbf
23.5 ~ 27.5 N·m 2.40 ~ 2.80 kgf·m 17.4 ~ 20.3 ft·lbf
29.4 ~ 34.3 N·m 3.00 ~ 3.50 kgf·m 21.7 ~ 25.3 ft·lbf
M10
39.2 ~ 45.1 N·m 4.00 ~ 4.60 kgf·m 28.9 ~ 33.3 ft·lbf
48.0 ~ 55.9 N·m 4.90 ~ 5.70 kgf·m 35.4 ~ 41.2 ft·lbf
60.8 ~ 70.6 N·m 6.20 ~ 7.20 kgf·m 44.8 ~ 52.1 ft·lbf
M12
62.8 ~ 72.6 N·m 6.40 ~ 7.40 kgf·m 46.3 ~ 53.5 ft·lbf
77.5 ~ 90.2 N·m 7.90 ~ 9.20 kgf·m 57.1 ~ 66.5 ft·lbf
103.0 ~ 117.7 N·m 10.50 ~ 12.00 kgf·m 75.9~ 86.8 ft·lbf
M14
107.9 ~ 125.5 N·m 11.00 ~ 12.80 kgf·m 79.6 ~ 92.6 ft·lbf
123.6 ~ 147.1 N·m 12.60 ~ 15.0 kgf·m 91.1 ~ 108.5 ft·lbf
166.7 ~ 196.1 N·m 17.00 ~ 20.00 kgf·m 123.0 ~ 144.7 ft·lbf
M16
166.7 ~ 191.2 N·m 17.00 ~ 19.50 kgf·m 123.0 ~ 141.0 ft·lbf
196.1 ~ 225.6 N·m 20.00 ~ 23.00 kgf·m 144.7 ~ 166.4 ft·lbf
259.9 ~ 304.0 N·m 26.50 ~ 31.00 kgf·m 191.7 ~ 224.2 ft·lbf
M18
245.2 ~ 284.4 N·m 25.00 ~ 29.0 kgf·m 180.8 ~ 209.7 ft·lbf
274.6 ~ 318.7 N·m 28.00 ~ 32.50 kgf·m 202.5 ~ 235.1 ft·lbf
343.2~ 402.1 N·m 35.00 ~ 41.00 kgf·m 253.2 ~ 296.5 ft·lbf
M20
333.4~ 392.2 N·m 34.00 ~ 40.00 kgf·m 245.9 ~ 389.3 ft·lbf
367.7 ~ 431.5 N·m 37.50 ~ 44.0 kgf·m 271.2 ~ 318.2 ft·lbf
519.8 ~ 568.8 N·m 53.00 ~ 58.00 kgf·m 383.3 ~ 419.5 ft·lbf
(9) Types and materials of bolts and nuts [ex. bolts] Types
Material
Tensile strength
Hardness
4T
SS41
Over 392 MPa 4000 kgf/cm2 56892 lbf/in2
HRB 62 ~ 98
No mark or marked 4
7T
S40C S45C
Over 686 MPa 7000 kgf/cm2 99561 lbf/in2
HRC 20 ~ 28
Marked 7
9T
SCr4
Over 882 MPa 9000 kgf/cm2 128007 lbf/in2
HRC 28 ~ 34
Marked 9
I-S-13
Bolt head marking
WSM U17-3α/U17-3/U17
I. GENERAL
(10) Washer-equipped elbow Tightening torque Size
N·m
kgf·m
ft·lbs
G1/4
25 ~ 30
2.5 ~ 3.0
18 ~ 22
G3/8
49 ~ 54
5.0 ~ 5.5
36 ~ 40
G1/2
59 ~ 64
6.0 ~ 6.5
43 ~ 47
G3/4 G1
118 ~ 127
12.0 ~ 13.0
87 ~ 94
Tightening procedure 1) Connecting with the valve • Screw in the elbow by hand until the washer comes into contact. Note: Clean up the mating seal beforehand.
2) Positioning • Turn the elbow back to its set position. Note: Do not make any more than one turn back.
3) Fixing • Tighten up the lock nut with a wrench. • Lock nut tightening torque G1/4: 25 ~ 30 N·m (2.5 ~ 3.0 kgf·m, 18 ~ 22 ft·lbs) G3/8: 50 ~ 55 N·m (5.0 ~ 5.5 kgf·m, 36 ~ 40 ft·lbs) G1/2: 60 ~ 65 N·m (6.0 ~ 6.5 kgf·m, 43 ~ 47 ft·lbs) G3/4: 118 ~ 127 N·m (12.0 ~ 13.0 kgf·m, 87 ~ 94 ft·lbs) G1: 118 ~ 127 N·m (12.0 ~ 13.0 kgf·m, 87 ~ 94 ft·lbs)
(11) Adhesives 1. Thread adhesive Types of thread adhesive
Loctite 271 or equivalent (heavy-duty) ThreeBond 1305P or equivalent (heavy-duty) ThreeBond TB1401B or equivalent (light-duty) ThreeBond 1324 (medium-duty) unless otherwise specified
* No oil and water allowed on the threads. Type of instant adhesive
ThreeBond 1733 or 1741E
* No oil and water allowed on the threads. 2. Radiator hose sealant Sealant
ThreeBond #1208E or equivalent
I-S-14
WSM U17-3Îą/U17-3/U17
I. GENERAL
E. MAINTENANCE INTERVALS a. EU-version [Operator servicing]
General maintenance
Elapsed hours of operation 50
100
150
200
250
300
350
400
450
500
Interval
Checking the engine oil level
daily
Check hydraulic oil level
daily
Check fuel level
daily
Check coolant level
daily
Lubricate front-end attachments Checking the radiator and oil cooler
daily daily
Check electric cables and connections
daily
Check water separator
daily
Check V-belt
daily
Drain water from the fuel reservoir
500 h
Lubricate the swivel gear
50 h
Battery service
50 h
Tracks and chassis: clean, visually inspect and check tension
weekly (50 h)
100 h
Check nuts and bolts Check, clean air filter Grease the swivel bearing
1.)
200 h
200 h
1.) Under dusty conditions the air filter must be cleaned more frequently or replaced.
I-S-15
1
WSM U17-3Îą/U17-3/U17
I. GENERAL
[Operator servicing]
General maintenance
Elapsed hours of operation 550
600
650
700
750
800
850
900
950
1000
Interval
Checking the engine oil level
daily
Check hydraulic oil level
daily
Check fuel level
daily
Check coolant level
daily
Lubricate front-end attachments Checking the radiator and oil cooler
daily daily
Check electric cables and connections
daily
Check water separator
daily
Check V-belt
daily
Drain water from the fuel reservoir
500 h
Lubricate the swivel gear
50 h
Battery service
50 h
Tracks and chassis: clean, visually inspect and check tension
weekly (50 h)
100 h
Check nuts and bolts Check, clean air filter Grease the swivel bearing
1.)
200 h
200 h
1.) Under dusty conditions the air filter must be cleaned more frequently or replaced.
I-S-16
1
WSM U17-3α/U17-3/U17
I. GENERAL
[Servicing by skilled personnel or KUBOTA dealer]
Elapsed hours of operation *
Servicing
50
100
150
200
250
300
350
400
450
500
Interval
Check/adjust V-belt tension
250 h
Check coolant hoses and clamps
250 h
Grease pilot valve linkage
250 h
500 h
500 h
500 h
500 h
Change engine oil and oil filter Replace the fuel filter
4.)
Change return filter for the hydraulic oil tank 3.) Replace the drive unit oil Change hydraulic oil and suction filter 2.) Replace the in-line filter Replace the air filter elements 1.)
Please contact your KUBOTA dealer.
Please contact your KUBOTA dealer.
1000 h
Please contact your KUBOTA dealer.
1000 h 1000 h
Change running gear and track roller oil
Please contact your KUBOTA dealer.
2000 h
Check alternator and starter motor
Please contact your KUBOTA dealer.
2000 h
Check electric cables and connections
Please contact your KUBOTA dealer.
Annually
Safety inspection
Annually
Replace the coolant and rinse the cooling system
every 2 years
Replace coolant hoses and clamps
Please contact your KUBOTA dealer.
Change hydraulic hoses
Please contact your KUBOTA dealer.
* 1.) 2.)
3.) 4.)
250 h every 6 years
The servicing identified with z must be carried out after the specified hours of operation after initial operation have been reached. Under dusty conditions the air filter must be cleaned more frequently or replaced. When using a hydraulic hammer over 20% → every 800 h. When using a hydraulic hammer over 40% → every 400 h. When using a hydraulic hammer over 60% → every 300 h. When using a hydraulic hammer over 80% → every 200 h. When using a hydraulic hammer up to 50% → every 200 h. When using a hydraulic hammer over 50% → every 100 h. Replace the return filter approximately 250 hours after the initial operation. Earlier if necessary.
I-S-16-1
1
WSM U17-3α/U17-3/U17
I. GENERAL
[Servicing by skilled personnel or KUBOTA dealer]
Elapsed hours of operation
Servicing
550
600
650
700
750
800
850
900
950
1000
Interval
Check/adjust V-belt tension
250 h
Check coolant hoses and clamps
250 h
Grease pilot valve linkage
250 h
500 h
4.)
500 h
Change return filter for the hydraulic oil tank 3.)
500 h
500 h
Change engine oil and oil filter Replace the fuel filter
Please contact your KUBOTA dealer.
Replace the drive unit oil Change hydraulic oil and suction filter 2.) Replace the in-line filter Replace the air filter elements 1.)
Please contact your KUBOTA dealer.
1000 h
Please contact your KUBOTA dealer.
1000 h 1000 h
Change running gear and track roller oil
Please contact your KUBOTA dealer.
2000 h
Check alternator and starter motor
Please contact your KUBOTA dealer.
2000 h
Check electric cables and connections
Please contact your KUBOTA dealer.
Annually
Safety inspection
Annually
Replace the coolant and rinse the cooling system
every 2 years
Replace coolant hoses and clamps
Please contact your KUBOTA dealer.
Change hydraulic hoses
Please contact your KUBOTA dealer.
250 h every 6 years
1.) Under dusty conditions the air filter must be cleaned more frequently or replaced. 2.) When using a hydraulic hammer over 20% → every 800 h. When using a hydraulic hammer over 40% → every 400 h. When using a hydraulic hammer over 60% → every 300 h. When using a hydraulic hammer over 80% → every 200 h. 3.) When using a hydraulic hammer up to 50% → every 200 h. When using a hydraulic hammer over 50% → every 100 h. 4.) Earlier if necessary.
I-S-16-2
1
WSM U17-3Îą/U17-3/U17
I. GENERAL
b. PP (KTC, KCL)-version No.
Check points
1
Coolant
2
Fuel
3
Intervals check
Hour meter indicator 50
100
Engine oil
Daily check
check
Daily check
change
6
Radiator and oil cooler
check
Daily check
7
Engine and electrical wiring
check
Daily check
8
Fuel tank, Fuel filter
drain check
change
9
Battery condition Greasing swing bearing teeth
11
Fan belt tension Radiator hoses and clamps
Air filter element
Outer element Inner element
400
450
Consequently
every 500 hrs
Lubrication points
10
350
Daily check
5
-
300
every 2 years
check
check
250
Daily check
Hydraulic oil
13
200
change
4
12
150
every 1000 hrs
every year every 50 hrs every 50 hrs
-
every 50 hrs
adjust
every 200 hrs
check
every 200 hrs
replace
every 2 years
clean
every 200 hrs
*2
replace
every 1000 hrs
*2
replace
every 1000 hrs
*2
14
Greasing swing ball bearings
-
every 200 hrs
15
Fuel filter element
replace
every 400 hrs
16
Engine oil filter
replace
every 500 hrs
17
Drive unit oil
change
every 500 hrs
18
Hydraulic return filter element
replace
every 500 hrs
19
Hydraulic suction filter element
replace
every 1000 hrs
20
Fuel injection nozzle injection pressure
check
every 1500 hrs
21
Front idler and track roller oil
change
every 2000 hrs
22
Alternator and starter motor
check
every 2000 hrs
23
Injection pump
check
every 3000 hrs
24
Radiator system
25
Fuel line and Intake air line
*1
Daily check
rinse
every 2 years
check
every 200 hrs
replace
every 2 years
* 500 thru 1000 continued to the following table.
I-S-17
@
@
*4
@
*4
@
*3
@
WSM U17-3Îą/U17-3/U17
No.
Check points
1
Coolant
2
Fuel
3
I. GENERAL
Intervals check
Hour meter indicator 500
550
Engine oil
Daily check
check
Daily check
change
6
Radiator and oil cooler
check
Daily check
7
Engine and electrical wiring
check
Daily check
8
Fuel tank, Fuel filter
drain check
change
9
Battery condition Greasing swing bearing teeth
11
Fan belt tension Radiator hoses and clamps
Air filter element
Outer element Inner element
1000
Consequently
every 500 hrs
Lubrication points
10
800
Daily check
5
-
750
every 2 years
check
check
700
Daily check
Hydraulic oil
13
650
change
4
12
600
every 1000 hrs
every year every 50 hrs every 50 hrs
-
every 50 hrs
adjust
every 200 hrs
check
every 200 hrs
replace
every 2 years
clean
every 200 hrs
*2
replace
every 1000 hrs
*2
replace
every 1000 hrs
*2
14
Greasing swing ball bearings
-
every 200 hrs
15
Fuel filter element
replace
every 400 hrs
16
Engine oil filter
replace
every 500 hrs
17
Drive unit oil
change
every 500 hrs
18
Hydraulic return filter element
replace
every 500 hrs
19
Hydraulic suction filter element
replace
every 1000 hrs
20
Fuel injection nozzle injection pressure
check
every 1500 hrs
21
Front idler and track roller oil
change
every 2000 hrs
22
Alternator and starter motor
check
every 2000 hrs
23
Injection pump
check
every 3000 hrs
24
Radiator system
25
Fuel line and Intake air line
*1
Daily check
rinse
every 2 years
check
every 200 hrs
replace
every 2 years
@
@
*4
@
*4
@
*3
@
First operation *1 When using a hydraulic breaker, change hydraulic oil and return filter according to the table on "Hydraulic Oil Change (Including Exchange of the Suction Filter in the Hydraulic Tank) under "EVERY 1000 SERVICE HOURS" in the chapter "REGULAR CHECKS AND MAINTENANCE WORK". *2 Clean and replace the air filter more frequently if used under dusty conditions. By heavy soiling, replace the filter. *3 Replace only if necessary. *4 Consult your local KUBOTA Dealer for this service. A The items listed above (@ marked) are registered as emission related critical parts by KUBOTA in the U.S. EPA nonroad emission regulation. As the engine owner, you are responsible for the performance of the required maintenance on the engine according to the above instruction. Please see the Warranty Statement in detail.
I-S-18
WSM U17-3α/U17-3/U17
I. GENERAL
c. KTA-version No.
Checkpoints
Hour meter indicator
Intervals
50 100 150 200 250 300 350 400 450 500 550 600 1000 2000
1 Fuel
check Daily check
2 Engine oil
check Daily check change
3 Hydraulic oil** 4 Coolant
Consequently
Ref. page 49 50
every 250 hrs
56 51
check Daily check change
every 1000 hrs
63 49
check Daily check change
every 2 years
64 52
5 Lubrication points
check Daily check
6 Radiator
check Daily check
7 Battery condition
check
8 Electrical lines
check Daily check, Annual servicing
Greasing of swing 9 bearing teeth
53 every 50 hrs 50,51 64 every 50 hrs
54
10 Drive unit oil
change
every 500 hrs
59
11 Fan belt tension
adjust
every 200 hrs
57
check
every 200 hrs
58
change
every 2 years
64
clean
every 200 hrs
55
change
every 1000 hrs
63
every 200 hrs
56
12
Radiator hoses and clamps
13 Air filter element*
@
14
Greasing of swing ball bearings
15
Fuel pipes and hoses
check
every 200 hrs
change
every 2 years
58
16 Engine oil filter
change
every 250 hrs
58
check
every 50 hrs
change
every 500 hrs
59
Hydraulic return 18 filter element
change
every 1000 hrs
60
19
Hydraulic suction filter element
change
every 1000 hrs
62
20
Front idler and track roller oil
change
every 2000 hrs
63
Dynamo and 21 starter motor
check
every 2000 hrs
63
22 Radiator system
rinse
every 2 years
64
Fuel injection nozzle 23 (Injection pressure) check
every 1500 hrs
57
@
24 Injection pump
every 3000 hrs
57
@
17 Fuel filter
check
@
IMPORTANT: • * Clean the air filter more frequently if used in dusty conditions. With heavy soiling, replace the filter. ** When using a hydraulic breaker, change hydraulic oil and return filter according to the table on "Hydraulic Oil Change(Including Exchange of the Suction Filter in the Hydraulic Tank)" under "EVERY 1000 SERVICE HOURS" in "REGULAR CHECKS AND MAINTENANCE WORK". • The items listed above (@ marked) are registered as emission related critical parts by KUBOTA in the U.S.EPA nonroad emission regulation. As the engine owner, you are responsible for the performance of the required maintenance on the engine according to the above instruction. Please see the Warranty Statement in detail.
I-S-19
WSM U17-3α/U17-3/U17
I. GENERAL
d. Hydraulic Oil Check for Machines with Hydraulic Breakers The hydraulic oil change after 1000 operating hours in the operator’s manual is based on the type of work done. Following inspection measure are valid when hydraulic breakers are used: 1. Changing and filling up of hydraulic oil 1) The hydraulic oil must be changed more often when breakers are used because the machine is subject to harder conditions than at normal excavating work. 2) Use only the recommended oils mentioned in the operator’s manual when changing or fill oil. 3) When filling up oil, never mix oils of different makes. 2. Changing the return filter and oil 1) The filter must be changed more often because of contamination resulting from the frequent assembly and disassembly of the hoses. 2) Use the correct replacement filter. 3) Oil change according to operating hours.
Normal excavator work
Breaker work portion
Hydraulic oil
Return Filter
every 1000 hrs.
500 hrs.
20%
every 800 hrs.
40%
every 400 hrs.
60%
every 300 hrs.
More than 80%
every 200 hrs.
Suction Filter
300 hrs. 1000 hrs. 100 hrs.
3. Kubota’s recommended breakers for U17-3α and U17/U17-3. (Japanese breakers) Furukawa
HB2G
Tokuu
TNB-1E
Maruzen
MHB-71
Nippon Pneumatic
H-08X
I-S-20
WSM U17-3α/U17-3/U17
I. GENERAL
e. Maintenance Items (1) Drive unit Oil Change (First Oil Change of the 100 hours) CAUTION To avoid personal injury: • Lower attachments on the ground, stop the engine and remove the key before undertaking the oil change. 1) Rotate the crawler so that the drain plug of the drive unit is in the bottom position. 2) Remove the drain plug to let the oil run out. Screw in and tighten the drain plug again and fill with gear oil through the oil check port. 3) Fill oil until it overflows out of the oil check port. Gear oil volumes
Approx. 0.25 L (0.07 USgal.)
Oil change • first oil change after 100 hrs • then every 500 hrs • or at least once a year
(1) Oil check port (also serves as oil filling port) (2) Drain plug
4) Use prescribed gear oil SAE 90.
(2) Inspection and Cleaning of the Air Filter Element Open the engine bonnet and remove the dust-cover. Take out only outer element, clean the element, case interior and reassemble. During reassembly, take care to install the dust-cover so that its TOP mark (arrow) faces up-wards. Do not remove the inner element. IMPORTANT: • Should the machine be used in extremely dusty areas, the air filter element must be inspected and cleaned more frequently than in the specified maintenance periods. • The air filter has a dry element, keep free from oil. • Do not run the engine without the air filter.
(1) (2) (3) (4)
Outer element Inner element Dust-cover Clamps
I-S-21
WSM U17-3α/U17-3/U17
I. GENERAL
CAUTION To avoid personal injury: • Wear eye protection.
Cleaning with compressed air Pressure of compressed air must be under 205 kPa (2.1 kgf/cm2, 30 psi) and the cartridge should be blown clean from the inside to the outside until the dust deposits are remarkably reduced. IMPORTANT: • If the air suction is still inadequate, or the color of the exhaust gases is abnormal even after the cleaning, the air filter element must be replaced.
(3) Cleaning the Track Frame Slide Pipes When the slide pipes of the track frame are clogged or adhered with soil or sand, clean the slide pipes in the following manner according to need. WARNING To avoid the personal injury or death: • Place the machine on even ground when cleaning the track frame slide pipes. 1. First lift the machine off the ground using the dozer blade and boom functions. 2. Switch the track width change / dozer select lever to the “Track width change” position. 3. Push the control lever forward, and expand the track width to 1240 mm (48.8 in.). 4. Remove soil and sand adhered to the slide pipes, then put grease evenly around the pipes. Make sure all 4 slide pipes are greased. 5. Retract and expand the track width repeatedly for a few times by moving the control lever, so that the grease is spread adequately. 6. Switch the track width change / dozer select lever to the “Dozer” position. 7. Place the machine down on the ground carefully by moving the dozer blade and the boom.
I-S-22
(1) Track frame slide pipes
WSM U17-3Îą/U17-3/U17
I. GENERAL
f. Troubleshooting for Operators If the excavator does not show the desired performance, or when trouble arises, refer to the table below and undertake appropriate measures. Trouble
Cause
Countermeasure
Fuel is too viscous
* Check fuel tank and filter * Remove impurities and water * If necessary, replace filter
Air or water in the fuel system
* Remove water from the fuel tank * Check fuel pipe joint bolts and nuts for looseness * Purging of the fuel system (for fuel filter and injection pump, see "PURGING OF THE FUEL SYSTEM" in "OTHER ADJUSTMENTS AND REPLACEMENTS".)
Oil viscosity is too high that the engine runs sluggishly in winter
* Pour hot water over the radiator * Use oils of different viscosities depending on the ambient temperature. (Use SAE10W, SAE10W-30 or SAE10W-40)
Battery is almost dead; insufficient compression
* Recharge battery
Low fuel level
* Check fuel and add if necessary
Starting difficulties
Insufficient engine power
Engine
Engine suddenly stops Abnormal exhaust gas color
Drive System
Hydraulic System
Water temperature too high (Overheating)
Boom, arm, bucket, drive, swing and dozer power is too low Non-function of swing motor
Deviation of drive direction
Clogged air cleaner
* Clean the air filter element
Low fuel level
* Check fuel and add if necessary * Purge the fuel system
Poor fuel
* Use high quality fuel
Too much engine oil
* Drain engine oil to prescribed oil level
Defective seal of the water pump
* Replace
Worn or torn fan belt
* Adjust or replace
Thermostat is defect
* Replace
Coolant level too low
* Fill to prescribed level
Radiator grill or fins are clogged
* Clean
Coolant is contaminated with rust from the cylinder head or crank case
* Replace coolant fluid and add anti-rust
Defective radiator cap (Evaporation)
* Replace
Corroded coolant pipes
* Clean
Continuous operation under full load
* Reduce load
Cylinder head gasket is damaged (Coolant loss)
* Replace
Engine oil level too low
* Fill to prescribed level
Maladjustment of fuel injection
* Readjust ignition timing
Use of poor fuel
* Use prescribed fuel
Hydraulic oil level too low
* Add oil
Leakages of hoses and/or joints
* Replace hose or joint
Swing lock pin is in lock position
* Remove swing lock pin in unlock position
Blocked through stones
* Remove
Crawler too loose or too tight
* Adjust accordingly
I-S-23
WSM U17-3Îą/U17-3/U17
I. GENERAL
g. Periodic Replacement of Important Component Parts To ensure safety in operation, you are strongly requested to inspect and service the machine at regular intervals. For added safety, ask your KUBOTA dealer to replace the following important component parts. These parts are prone to degradation in material or subject to wear and tear with time. It is difficult to judge how much they have been affected at regular inspection. It is therefore necessary to replace them with new ones, whether wear is visible or not after a specified time of use. If any of them is found worn even before the specified use, it must be repaired or replaced the same way as other parts. If any of the hose clamps is found deformed or cracked, the hose clamp must also be replaced. For the hydraulic hoses other than the ones to be replaced periodically, inspect them for the following points. If found unusual, tighten them up, replace them. When replacing the hydraulic hoses, change their O rings and sealings with new ones. For replacement of the important parts, contact your KUBOTA dealer. â&#x20AC;˘ At the following periodic inspections, check the fuel hoses and hydraulic hoses as well. Inspection Interval
Check points
Daily Checks
Oil leak at fuel and hydraulic hose connections and points
Every month
Oil leak at fuel and hydraulic hose connections and points Damages at fuel and hydraulic hose (cracks, chafing)
Every year
Oil leak at fuel and hydraulic hose connections and points Interference, deformation, degradation, twist and other damages (cracks, chafing) of fuel and hydraulic hoses
List of important component parts No. 1
Component parts
Q'ty
Fuel hose (Fuel tank-Fuel filter)
2
2
Fuel hose (Fuel filter-Fuel pump)
2
3
Fuel hose (Fuel pump-Fuel nozzle)
2
4
Fuel hose (Fuel nozzle-Fuel tank)
1
5
Fuel hose (Fuel tank-Fuel drain)
1
6
Hydraulic hose (Main pump suction)
1
7
Hydraulic hose (Main pump delivery)
4
8
Hydraulic hose (Boom cylinder)
2
9
Hydraulic hose (Arm cylinder)
2
10
Hydraulic hose (Bucket cylinder)
2
11
Hydraulic hose (Swing cylinder)
2
12
Hydraulic hose (Dozer cylinder)
2
13
Hydraulic hose (Service port)
4
Period
Every 2 years or 4000 hours
To prevent serious damage to the hydraulic system, use only KUBOTA genuine hydraulic hose.
I-S-24
WSM U17-3α/U17-3/U17
I. GENERAL
h. Recommended Oils IMPORTANT 1. ISO 46 viscosity grade is being used at the assembly line before delivery. 2. Use engine oil API service classification CD, CE or CF. 3. Use SAE 90 (API, CLA/GL5) as drive unit oil for all seasons. Application
Engine oil
In winter or by low temperatures
In summer or by high ambient temperatures
All-Season engine oil
Gear oil
In winter or by low temperatures
In summer or by high ambient temperatures
Viscosity
Shell
Mobil
Exxon
SAE 10W
Shell Rotella T10W Shell Rimula 10W
Mobil Delvac 1310
XD-3 10W XD-3 Extra 10W
SAE 20W
Shell Rotella T20W-2 Shell Rimula 20W-20
Mobil Delvac 1320
XD-3 20W-20 XD-3 Extra 20W-20
SAE 30
Shell Rotella T30 Shell Rimula 30
Mobil Delvac 1330
XD-3 30 XD-3 Extra 30
SAE 40
Shell Rotella T40 Shell Rimula 40
Mobil Delvac 1340
XD-3 40 XD-3 Extra 40
SAE 50
Shell Rimula 50
Mobil Delvac 1350
Multi-purpose SAE 75 SAE 80 SAE 90
Mobilube HD80W-90 Shell Oil S8643
MIL-L-2105C
Mobilube HD80W-90 Shell Spirax HD80W
Shell Spirax HD90
Mobilube 46
MIL-L-2105
Mobilube HD80W-90
MIL-L-2105C
Mobilube HD85W-140
MIL-L-2105C MIL-L-2105C
Shell Spirax HD140
Mobilube HD80W-140
Multi-purpose
Shell Spirax HD80W Shell Spirax HD85W
Mobilube HD80W-90
GX80W-90
ISO 32
Shell Tellus T32
Mobil DTE-Oil 13
NUTO H32
ISO 46
Shell Tellus T46
Mobil DTE-Oil 15
NUTO H46
ISO 68
Shell Tellus T68
Mobil DTE-Oil 16
NUTO H68
Grease
Shell Alvania EP2
Mobilux EP2
BEACON Q2
Fuel
Light oil No. 2-D (ASTM D975)
Fuel under -5°C
Light oil No. 1-D (ASTM D975)
Hydraulic oil
In winter or by low temperatures In summer or by high ambient temperatures
MIL-L-2104C MIL-L-2104D
XD-3 15W-40 XD-3 Extra 15W-40
Shell Rotella T15W
SAE 140
All-weather gear oil
MIL-Standard
I-S-25
MIL-L-2105C
WSM U17-3α/U17-3/U17
I. GENERAL
i. Lifting Capacity â&#x20AC;¢
7KH OLIWLQJ FDSDFLW\ RI WKH H[FDYDWRU LV EDVHG RQ ,62 DQG GRHV QRW H[FHHG RI WKH VWDWLF WLOW ORDG RU RI WKH K\GUDXOLF OLIWLQJ FDSDFLW\ RI WKH PDFKLQH
â&#x20AC;¢
7KH OLIWLQJ FDSDFLW\ LV PHDVXUHG DW WKH IURQW SLQ SDUW RI WKH DUP ZLWK WKH DUP IXOO\ H[WHQGHG 7KH ERRP F\OLQGHU LV WKH RSHUDWLQJ F\OLQGHU The excavator as delivered may only transport materials in the bucket. The lifting of loads with the bucket or any other means of attachment is not allowed. The excavator can be retrofitted for lifting loads.
â&#x20AC;¢
7KH OLIWLQJ FRQGLWLRQV DUH
1. 2. 3.
Over front end, dozer down, standard arm Over front end, dozer up, standard arm Over side, standard arm
Do not lift loads which exceed the values indicated in the lifting capacity tables.
The values given in the tables apply only to level and hard grounds. When working on soft ground, the machine can tip over easily, as the load is concentrated on one side only and the track or the dozer can dig into the ground. The values given in the tables apply only for loads without bucket. If a bucket is used, the weight of the bucket must be subtracted from the values in the tables. The weight of mounted accessories (e.g. hydraulic hammer) must be subtracted from the lifting capacity.
When lifting loads using the excavator with a lifting capacity (acc. to ISO 10567:1992) of more than 1000 kg or a tilting moment Â&#x2022; 40,000 Nm, the excavator should be equipped with additional devices as described in EN 474-5 / section 4.1.7.5.
I-S-26
WSM U17-3α/U17-3/U17
I. GENERAL
(1) U17-3α Lifting capacity over front end, dozer down MODEL U17-3α KBM
SPECIFICATION
CANOPY VERSION WITH RUBBER CRAWLER Standard arm kN (t)
Height [mm]
Minimum
1500
2000
Load radius (mm) Maxi2500 mum
4500 4000 3500 3000 3.7 (0.37) 3.6 (0.36) 4.0 (0.41) 4.6 (0.47) 4.9 (0.50) 4.8 (0.49) 4.3 (0.44) 3.6 (0.37)
2500 2000 5.2 (0.53)
1500 1000 500 GL
0 -500 -1000
7.3 (0.75) 11.0 (1.12)
-1500
8.1 (0.83) 7.0 (0.71) 5.3 (0.54)
3.1 (0.32) 4.5 (0.46) 6.2 (0.63) 6.9 (0.70) 6.6 (0.67) 5.8 (0.60) 4.9 (0.50) 3.7 (0.37)
3.6 (0.37) 3.8 (0.38) 3.8 (0.39) 3.6 (0.37) 3.2 (0.33)
-2000 -2500 Lifting capacity over front end, dozer up MODEL U17-3α KBM
SPECIFICATION
CANOPY VERSION WITH RUBBER CRAWLER Standard arm kN (t)
Height [mm]
Minimum
1500
2000
Load radius (mm) Maxi2500 mum
4500 4000 3500 3000 2500 2000 5.2 (0.53)
1500 1000 500 GL
0 -500 -1000 -1500
7.3 (0.75) 11.0 (1.12)
5.5 (0.56) 5.6 (0.57) 5.3 (0.54)
3.1 (0.32) 4.0 (0.41) 3.8 (0.39) 3.6 (0.37) 3.5 (0.36) 3.5 (0.36) 3.5 (0.36) 3.6 (0.37)
2.9 (0.30) 2.9 (0.30) 2.8 (0.29) 2.7 (0.28) 2.6 (0.27) 2.6 (0.27) 2.5 (0.26) 2.5 (0.26)
-2000 -2500
I-S-27
2.1 (0.22) 2.1 (0.21) 2.0 (0.20) 2.0 (0.20) 2.0 (0.20)
WSM U17-3α/U17-3/U17
I. GENERAL
Lifting capacity over side (track width 1240 mm) MODEL U17-3α SPECIFICATION
CANOPY VERSION WITH RUBBER CRAWLER
KBM
Standard arm kN (t)
Height [mm]
Minimum
1500
2000
Load radius (mm) Maxi2500 mum
4500 4000 3500 3000 2500 2000 5.2 (0.53)
1500 1000 500 GL
0 -500 -1000 -1500
7.3 (0.75) 10.9 (1.11)
5.0 (0.51) 5.1 (0.52) 5.2 (0.53)
3.1 (0.32) 3.7 (0.38) 3.5 (0.36) 3.3 (0.34) 3.3 (0.33) 3.2 (0.33) 3.2 (0.33) 3.3 (0.34)
2.7 (0.28) 2.7 (0.28) 2.7 (0.28) 2.6 (0.26) 2.5 (0.24) 2.4 (0.24) 2.4 (0.24) 2.4 (0.24)
-2000 -2500
I-S-28
2.0 (0.20) 2.0 (0.20) 1.9 (0.17) 1.9 (0.19) 1.8 (0.19)
WSM U17-3α/U17-3/U17
I. GENERAL
(2) U17-3, U17 ROPS CANOPY RUBBER TRACK LIFTING CAPACITY OVER-FRONT BLADE DOWN Unit=1kN LIFTING POINT HEIGHT (m) 2.5 2.0 1.5 1.0 GL 0.5 0 -0.5 -1.0 -1.5
MIN
7.3 11.0
LIFT POINT RADIUS (m) 2.0 1.5 2.5 3.7 3.1 3.6 4.5 5.2 4.0 6.2 4.6 6.9 4.9 6.6 4.8 5.8 8.1 4.3 4.9 7.0 3.6 3.7 5.3
MAX 3.6 3.8 3.8 3.6 3.2
LIFTING CAPACITY OVER-FRONT BLADE UP Unit=1kN LIFTING POINT HEIGHT (m) 2.5 2.0 1.5 1.0 GL 0.5 0 -0.5 -1.0 -1.5
MIN
7.3 11.0
LIFT POINT RADIUS (m) 2.0 1.5 2.5 2.9 3.1 2.9 4.0 5.2 2.8 3.8 2.7 3.6 2.6 3.5 2.6 3.5 5.5 2.5 3.5 5.6 2.5 3.6 5.3
MAX 2.1 2.1 2.0 2.0 2.0
LIFTING CAPACITY OVER-SIDE TRACK WIDTH 1240mm Unit=1kN LIFTING POINT HEIGHT (m) 2.5 2.0 1.5 1.0 GL 0.5 0 -0.5 -1.0 -1.5
3
MIN
6.1 6.1
LIFT POINT RADIUS (m) 2.0 2.5 1.5 1.8 2.6 1.8 2.5 1.8 3.9 2.3 1.7 2.1 1.6 2.1 1.5 2.0 1.5 3.1 2.1 1.5 3.1 2.1 3.2
MAX 1.3 1.3 1.2 1.2 1.2
WARNING To avoid personal injury or death: Operate always in standard track width 1240mm(49.0 in), except to pass through narrow space. Do not operate in narrow track width 990mm(39.0 in), it makes risk of the excavator tipping over.
LIFTING CAPACITY OVER-SIDE TRACK WIDTH 39.0 in ONLY REFERENCE Unit=1000 lbs. LIFT POINT HEIGHT (ft) 8 6 4 2 GL 0 -2 -4
MIN
0.97 0.98
LIFT POINT RADIUS (ft) 8 6 0.43 0.43 0.67 0.40 0.62 0.38 0.55 0.36 0.52 0.35 0.52 0.36 0.53
MAX
0.28 0.27 0.26
LIFTING CAPACITY OVER-SIDE TRACK WIDTH 990mm ONLY REFERENCE Unit=1kN LIFTING POINT HEIGHT (m) 2.5 2.0 1.5 1.0 GL 0.5 0 -0.5 -1.0 -1.5
I-S-29
MIN
6.1 6.1
LIFT POINT RADIUS (m) 2.0 2.5 1.5 1.8 2.6 1.8 2.5 1.8 3.9 2.3 1.7 2.1 1.6 2.1 1.5 2.0 1.5 3.1 2.1 1.5 3.1 2.1 3.2
MAX 1.3 1.3 1.2 1.2 1.2
WSM U17-3α/U17-3/U17
I. GENERAL
I-S-30
WSM U17-3α/U17-3/U17
I. GENERAL
F. PRODUCT INFORMATION
a. U17-3α Development Concept • The engine, D902 of KX41-3 for North America is substituted for D782 to face competitive machines with larger engines. • Traveling & turning performance are advanced and durability is also upgraded with a travel motor hose inner-packed. Kubota original digital meter and anti-theft system are introduced as well. • Additionally, outer flange track roller, short-pitched rubber track, digital meter, anti-theft system and work light are upgraded. • The model U15-3 is re-named U17-3α to compete with machines labeled 1.7~1.8t.
b. Why Minor Change? Be more competitive through advanced “Performance“ & “Quality“! 1) New Engine Higher output engine D782 → D902 2) Enhancement of undercarriage • Advanced traction force • Increased travel motor torque • Outer-flange track roller • Short-pitched rubber track • Travel motor hose protection
New model name - ”U17-3α” (EU-version)
I-S-31
WSM U17-3α/U17-3/U17
I. GENERAL
c. Quick Chart : additional sales feature : enhancement of undercarriage : other design change
* Power socket (12V)
1) Engine D782-BH 9) Steel track (OPT) Track link height 10mm(0.39”) lowered
D902-BH
2) Pump capacity 7.2 7.5cc (same as KX41-3)
4) Dozer arm 45mm (1.79”) extended
3) Kubota original digital meter
* Undercarriage 20mm (0.79”) forward designed 5) Track roller Outer flange type 6) Short-pitched rubber track
7) Travel motor hose protected
I-S-32
8) Travel motor torque increased
WSM U17-3α/U17-3/U17
I. GENERAL
d. Major Sales Feature 1) Engine U15-3
U17-3α
Difference
D782-EBH
D902-E3BH
-
kW(PS)
9.6(13)
11.8(16)
2.2(+3)
rpm
2300
2300
equivalent
/L
3 / 0.778
3 / 0.898
- / +0.12
mode output (sales catalog) speed
number of cylinder/ displacement
2) Pump capacity 7.2 ⇒ 7.5cc (Same pump as KX41-3 ) 3) Kubota Original Digital Meter Newly equipped digital meter same as other KX-3/U-3 series, over 1.5t class. For EU market, an easier key setting of Anti-theft system is introduced. 4) Dozer arm 45mm extended for easier cleaning with the dozer edge. 5) Outer-flange type track roller 6) Short-pitched rubber track (less travel vibration)
7) Travel motor’s torque increased
Travel speed
Traction force
U15-3
U17-3α
Difference
km/h
2.2 / 4.1
2.2 / 4.1
equivalent
Low/high (measured)
kN
10.7/5.3
14.7/7.7
+4.0 / +2.4
Low/high (theoretical)
kN
12.9 / 6.5
14.2/7.1
+1.3 / +0.6
Low/high
I-S-33
WSM U17-3Îą/U17-3/U17
I. GENERAL
8) Protected travel motor hose Travel motor hoses are covered for better look and durability. 9) Steel track (OPT) Track link height is lowered by 10mm to prevent from being stuck with soil.
e. Specifications Comparison (Rubber track)
Kubota
Kubota
Komatsu
Yanmar
Item
U15-3
U17-3Îą
PC18MR-2
Universal Vio17
Weight Engine (Sales catalog value)
rubber/steel
kg
1600/1670
1650/1710
1640/1710
1620/1680
D782-EBH
D902-BH-1
3D67E-1
3TNV70
kW (PS)
9.6 (13)
11.8 (16)
11.2 (15.2)
10.1 (13.7)
rpm
2300
2300
2600
2200
Model Output RPM
mm
990-1240
990-1240
980-1300
950-1280
Bucket
kN (kgf)
15.2 (1550)
15.2 (1550)
15.9 (1620)
15.2 (1550)
Arm
kN (kgf)
8.5 (865)
8.5 (865)
9.9 (1000)
8.5 (870)
Max. digging height
mm
3540
3540
3615
3690
Max. dumping height
mm
2440
2440
2610
2630
Max. digging depth
mm
2310
2310
2160
2200
Max. vertical digging depth
mm
1910
1910
1785
1850
Max. digging reach @ground level
mm
3840
3840
3935
3710
Low/high (measured)
kN
10.7/5.3
14.7/7.7
8.8/8.2
Low/high (theoretical)
kN
12.9/6.5
14.2/7.1
Digital panel
No
Yes
No
No
Anti-theft system (EU)
No
Yes
No
No
Track roller
Inner
Outer
Inner
Outer
Short pitched rubber track
Long
Yes
Long
Yes
No
Yes
No
No
Overall width Max. digging force
Traction force
Protected travel hoses
I-S-34
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
II. MACHINE BODY Mechanism Section A. MACHINE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-M-3 a. b. c. d.
Major Dimensions and Working Range (with Rubber Crawler) . . . . . . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Main Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U17-3α vs U17/U17-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
II-M-3 II-M-5 II-M-7 II-M-8
B. MACHINE BODY STRUCTURE AND FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . II-M-9 a. Overall Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-M-9 b. Under Carriage Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-M-15
II-M-1
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
II-M-2
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
A. MACHINE SPECIFICATIONS a. Major Dimensions and Working Range (with Rubber Crawler) α 1. Specifications for the U17-3α: EU-version
KUBOTA Excavator U17-3α Canopy
Model name Type (rubber crawler) Operating weight Bucket
Engine
(without driver)
kg
Volume Width Type Model name Displacement Engine performance DIN 70020 Rated speed Swivel speed (swivel frame)
m³ mm
cm³
0,04 400 3 cylinder diesel engine, water-cooled KUBOTA D902-BH-1 898
kW
11,6
1/min
2300
1/min
9,1
fast km/h slow km/h
Vehicle speed Performance
1650
4,1 2,1
Ground pressure (without driver) Climbing performance
kPa (kgf/cm²) % (degree)
Max. lateral sway
% (degree)
27 (15)
mm rad (degree) rad (degree)
990 x 260; 1240 x 260 1,13 (65) 1,01 (58)
Dozer (width x height) Swing angle Left of the boom Right Max. volume (theoretical) Service port connector Max. pressure Volume of the fuel reservoir Pulling capacity of the tow lug Tongue load at the tow lug LpA Noise level LwA Vibration at the drive lever Vibration at the control lever Vibration at the driver's seat Vibration at the bottom plate
L/min MPa (kgf/cm²) L N N dB (A) (2000/14/EC) dB (A) m/s² m/s² m/s² m/s²
II-M-3
26 (0,26) 58 (30)
27 18,6 190 19 32300 2700 79 92 < 3,0 < 4,5 < 0,5 < 0,9
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
2. Specifications for the U17/U17-3: PP-version KUBOTA EXCAVATOR Model name
U17/U17-3
Type
Canopy
Operating weight (including operator's)
3704 (1680)
lbs.(kg)
Water cooled 4 cycle diesel engine with 3 cylinder
Type
KUBOTA D902
Model name Engine
Total displacement cc (cu.in) Engine power SAE gross
rpm
2300
Unit swing speed
rpm
9.1
Performance
Dozer Boom swing angle
Fuel tank capacity
12.7 (17.0)
kW(Hp)
Rated speed
Travel speed
Pressure connection for attachments
898 (54.8)
Fast
mph (km/h)
1.4 (2.1)
Slow
mph (km/h)
2.6 (4.1)
Ground pressure (With operator)
psi (kPa) [kgf/cm2]
3.7 26 [0.26]
Climbing angle
%(deg)
58 (30)
Width X Height
in.(mm)
39.0/48.8 X 10.2 (990/1240 X 260)
Left
deg (rad)
65 (1.13)
Right
deg (rad)
58 (1.01)
Max. displacement (Theoretical) US gal (L)/min
7.13 (27)
Max. pressure
psi (MPa) [kgf/cm2]
2702 (18.6) [190]
US gal (L)
5.0 (19)
NOTE: Above dimensions are based on the machine with rubber trucks and JPN bucket. JPN = made in Japan Specifications subject to change without notice. ∗ With unloaded digging bucket. ∗ Firm compacted soil. ∗ Operators must exercise extra caution and follow instructions in the operator's manual. ∗ Worse condition or heavier attachment to the above will decrease climbing angle.
II-M-4
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
b. Dimensions α
1. U17-3α: EU-version
All dimensions in mm A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
510
385
990/ 1240
620
990
990/ 1240
3540
2440
2310
1910
1440
2340
2630
280
190
2750
795
3545
3840
3900
II-M-5
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
2. U17/U17-3: PP-version
in. (mm) A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
39/ 39/ 20.08 15.2 48.8 24.4 39.0 48.8 139.0 96.1 90.9 75.2 56.7 92.1 11.0 7.5 108.3 31.3 139.6 151.2 153.5 (510) (385) 990/ (620) (990) 990/ (3540) (2440) (2310) (1910) (1440) (2340) (280) (190) (2750) (795) (3545) (3840) (3900) 1240 1240
( )
( )
II-M-6
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
c. Main Specifications model Brand Type Engine
Output Displacement
Machine weight Standard capacity
bucket
heaped
U17-3α
U17/U17-3
KUBOTA
KUBOTA
D902-BH-1
D902-E3-BH-2
PS/rpm
16.7/2300
16.3/2300
kW/rpm
12.3/2300
12.0/2300
3
898 (54.8)
←
kg (lbs)
1650 (3638)
←
m3 (ft3)
0.04 (1.34)
3
cm (in )
Remarks
CECE
Maximum digging force, arm
KN (kgf) lbf
8.8 (900) 1984.1
Teeth bottom
Maximum digging force, bucket
KN (kgf) lbf
15.2 (1550) 3417.2
Teeth bottom
Cycle time
sec/cycle
Digging performance
m3/h (ft3/h)
Dozer capacity
m3 (ft3)
Relief pressure Hydraulic pump P1, P2 Pump discharge rate
MPa (kg/cm2) psi
21.6 (220) 3129
←
L/min (USGPM)
16.6 (4.39)
←
18.6 (190) 2702
←
10.4 (2.75)
←
Relief pressure P3 Pump discharge rate
MPa
(kg/cm2)
without extention blade
psi
L/min (USGPM)
Digging performance, cycle time conditions: Dig 1 m depth with Standard bucket and dump soil on the ground after 45° swivel.
II-M-7
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
d. U17-3α vs U17/U17-3 1. Comparison between EU and PP-version Items
U17-3α (EU-version)
U17/U17-3 (PP-version)
1. Variable track
{
{
2. Rops / Fops canopy
{
{
3. Cab
X
X
4. Boom cylinder in upper location
{
{
5. Anti-theft system
{
{
6. TPSS (Two pattern selection system)
X
{
7. Travel high speed switch on the dozer lever
{
{
8. Service port flow confluence, P2 + P3
{
{
9. Wrist type pilot control lever
{
{
10. LCD meter
{
{
11. High lift half suspension seat and seat belt
{
{
12. Front hydraulic hoses shoe-in type
{
{
13. Travel alarm
X
{ (Option), KTA (STD)
14. Accel lever
Pull-type
Push-type
15. Engine type
D902-BH-1
D902-E3-BH-2
16. Fan petal
7
7
17. Accumulator
{
{
18. Service port, third line
{
{
19. Travel safety system (Main spool unload method)
{
{
II-M-8
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
B. MACHINE BODY STRUCTURE AND FUNCTION a. Overall Arrangement (7)
(1)
(8) (16)
(9)
(2)
(10)
(11)
(12) (3) (4) (13)
(14)
(5)
(6)
(15)
Vertical Operation (1)
Service port pedal
(9)
Fuel tank
(2)
Control valve
(10) Swivel motor
(3)
Oil cooler
(11) Swivel joint
(4)
Battery
(12) Oil tank
(5)
Radiator
(13) Unloading valve
(6)
Suction pipe
(14) Pump
(7)
Swing pedal
(15) Engine
(8)
Selector valve
(16) Travel hi-low pedal (Japan)
Note: For the export model, the travel Hi-Low control switch is located on the dozer lever grip.
II-M-9
WSM U17-3Îą/U17-3/U17 Mechanism
II. MACHINE BODY
1. Arrangement of control levers
(1)
Left control console
(2)
Drive levers and control pedals
(3) Right control console (4)
Driver's seat
(11) Track width change/dozer select lever
II-M-10
WSM U17-3Îą/U17-3/U17 Mechanism
II. MACHINE BODY
(1) (2) (3) (4)
(1) Right control lever (2) Horn switch (3) Arm rest (4) Travel speed button (5) Dozer control lever (6) Throttle lever (7) Starter switch (8) Travel speed indicator (9) Rotary beacon button (10) Display
(6)
Working light switch
Adoption of Meters Hour meter, oil level gauge and Easy checker (oil lamp, charge lamp, glow lamp and fuel level alarm lamp) for various indications.
II-M-11
Warning light Display screen Display selector switch Working light button
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
Direction of accel lever: EU-version
PP-version
(Machine front)
(1)
(1)
Throttle lever
Throttle lever
(A) “FAST“ (B) “SLOW“
(1)
(2)
(4)
(5) (3) (1)
Hood Left
(4)
Oil cooler
(2)
Hood Rear
(5)
Radiator
(3)
Wing nut
The oil cooler and the radiator can be checked and cleaned by opening the left hood. Engine oil can be refilled by opening the inspection door after lifting up the seat. (1)
(1) Oil filler port
II-M-12
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
(2)
(1)
(3) (1) (3)
(4)
(4)
(2)
(1)
(5)
(6)
Water separator
(2)
Fuel filter
(3)
Air cleaner
(4)
Reserve tank
• Adoption of fuel level gauge makes it possible to check the remaining oil amount. • A gauge is mounted at the side of the fuel filler port. When fuel is nearly filled up, the pointer of the gauge starts moving and about 2 liters of fuel oil is filled up. • A hydraulic oil filler port is provided also at the side of the fuel filler port. (2) (3)
(4) (5) (6)
(1)
(1)
Fuel filter cartridge
(2)
Water separator
(3)
Water separator handle
(4)
Indication line
(5)
Float (Red)
(6)
Cup
(7)
Retainer ring
(7)
Like in the models of KX91-3Sα and KX121-3Sα Series, the fuel filter has been separated from the water separator.
II-M-13
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
2. Swing bracket (7)
(11)
(12) (8) (9)
(10)
(1)
Swing bracket
(2) ~ (6) Bushing (7)
After installing the bush, pin of φ34.9 (φ1.374) goes through smoothy.
(8)
Dimension before bushing.
(9)
Side of the bush (3) should flash the face.
(10)
After installing the bush, pin of φ34.9 (φ1.374) goes through smoothy.
(11)
Side of the bush (2) should behind the surface.
(12)
After installing the bush, pin of φ49.95 (φ1.967) goes through smoothy. (1)
(4)
(1)
Bushing end to be fitted to boss end
(2)
Bush (506040)
(3)
Bush (506040)
(4)
Bushing end to be fitted to boss end
II-M-14
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
b. Under Carriage Components 1. Swivel bearing ( ) : in (φ18.03) (P.C.D 17.24)
(4)
(φ15.75)
(0.197)
(1)
(0.0197)
(1.18)
(1.378)
(2)
(3)
(φ12.58)
(P.C.D 12.93) (φ13.46) (P.C.D 14.25) (φ15.75)
(1) Seal B (2) S-mark (3) Seal A (4) Rp 1/8, for grease nipple
Apply the nylon plug in position.
1) Number of teeth = 73 Details of the grease fitting 2) Backlash = 0.05 ~ 0.35 mm (0.002 ~ 0.014 inch) 3) P.C.D. = φ 328.5 4) Induction-harden the inner and outer ring raceways as well as the tooth flank and bottom. Raceway surface hardness: 50 ~ 60 HRC Tooth flank and bottom surface hardness: 52 ~ 60 HRC Machine front (See the Gear Specifications for gear hardening details.) 5) Inner ring’s “S” marking and outer ring’s stopper on the soft zone. When installing the bearing, position the soft zone where there is the least load. 6) Radial clearance (Measuring load) (0.03 ~ 0.25) Axial clearance (Measuring load) (0.03 ~ 0.15) II-M-15
Plug outer soft zone
Inner soft zone S - mark
WSM U17-3Îą/U17-3/U17 Mechanism
II. MACHINE BODY
2. Track frame (adjustment of play) 1
4 5
(1)
A
B
3
2 A B (2)
(1) Stopper bolt 4 Apply screw adhesive to their threads. 4 locations in total (2) Track frame, right and left, 4 locations in total Apply grease over the hatched (///////) surfaces.
Magnified view of adjusting portion
(0.177) or less (0.748) (0.354)
No.
Part Name
(Set bolt)
(1.339)
Q'ty
(1)
Set bolt (RA221-21161)
2
(2)
Nut
1
Play adjusting procedure 1. Tighten the play adjusting setbolts until they reach the left and right sides of the frame. 2. Loosen the play adjusting setbolts by 1/4 turns when they have reached the frame. 3. Lock the adjusting setbolts by nuts.
II-M-16
WSM U17-3Îą/U17-3/U17 Mechanism
II. MACHINE BODY
3. Structure of track roller
(1)
(2) (1) Make sure the plug's end face does not stretch out of the shaft. (2) Make sure the shaft stretches more than 0.1 mm at both ends.
No.
Part Name
1
Track roller subassembly
2
Roller: A
3
Roller: B
4
Color: A
5
Color: B
6
Shaft
7
Ring stopper
8
Bushing
9
Seal: Group
10 O-ring 11 Hex socket plug
Notes: 1. Fill the bearing with oil (40 cm3 (2.44 in3)). 2. Use Engine genuine oil SAE30 class CD or equivalent. 3. Use care not to confuse the sides of the shaft circlip. (Rolled-over side to be fitted in the groove is inner side, while the burred (sharp) side is the outer side) 4. The roller should be turned smoothly after it has been assembled completely. 5. Dimensions of assembling jigs for seal etc. and the assembling procedure are equivalent to those of RA211-2170Î&#x201D;.
II-M-17
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
4. Tension Device 1) Rubber track
2
3
1 No.
Part No.
1
RA231-2130Δ
Idler assembly
2 3
Part Name
Remarks
2
RA231-2150Δ
Cylinder assembly (left)
1
Track (left)
RA231-2160Δ
Cylinder assembly (right)
1
Track (right)
RA231-2155Δ
Grease fitting (grease cylinder)
2
In the case of rubber crawler, position it so that the joint marking (
) comes at the top center (see below).
(4)
10 ~ 15 mm
(4) Joint
Q'ty
10 ~ 15 mm (0.39 ~ 0.59 in.)
II-M-18
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
2) Iron track
(8) 1
2
No. Part No. Part Name Q'ty Remarks 1 RA231-2340Δ Idler assembly 2 Specific for iron crawler 2 RA231-2150Δ Cylinder assembly (left) 1 For track (left) RA231-2160Δ Cylinder assembly (right) 1 For track (right) 3 RC101-2155Δ Grease fitting (grease cylinder) 2 4 RA231-2112Δ Frame, track (left) 1 RA231-2113Δ Frame, track (right) 1
3
4
(8) Cast line provided on the side to identify apart from the idler assembly (RB237-2130Δ).
In the case of iron crawler type, fit the guide plate and sliding plate in position.
5
6
7
(9) No. Part No. Part Name 5 RA231-2318Δ Guide 6 01133-61030 Bolt 7 90545-11341 Plug
Q'ty Remarks 4 Specific for iron crawler, 2 pcs. each for left and right 12 4
Adjusting the crawler tension
25 ~ 30 mm 25 ~ 30 mm (0.98 ~ 1.18 in.)
II-M-19
(9) Attention to the fitting position of the sliding plate
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
5. Idler and tension spring, rubber track Rubber track
(17)
(18)
(19)
(1) Support 1
(5) Floating seal
(9) Wire
(13) Retainer
(2) Support 2
(6) Bushing
(10) Plug, R 1/8
(14) Nut
(3) shaft
(7) O-ring
(11) Yoke
(15) Split pin
(4) Idler
(8) Spring pin
(12) Spring
(16) Bolt
(17) This angle indicates the tilt between the yoke K and spring retainer M. (18) Spring's preset length (19) Spring bottom not to stretch out of the line A
OK
NO
1) Pre-set length of spring: L=130 mm (5.12 inch) 2) Bolt(16) tightening torque: 77.5 ~ 90.2 N·m (7.9 ~ 9.2 kgf·m) (57.16 ~ 66.53 ft·lbf) Apply screw lock agent. (Locktite 271). 3) Lub oil: Engine oil SAE30 CD. 30cc (1.83 in3)
(Spring roll pin direction)
II-M-20
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
Iron track
(1)
(2) (1) Spring's preset length: 137.5 mm (5.41 in.) (2) Spring bottom not to stretch out of the line A Idler assy mounting bolt M12 x 1.25, L = 45 Tightening torque: 77.5 ~ 90.2 N·m (7.9 ~ 9.2 kgf·m) 57.2 ~ 66.5 ft·lbs Apply screw lock agent (Locktite 271)
II-M-21
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
6. Rubber track
Rubber crawler's peripheral length: 48P x 70L = 3360 ± 10
Spec items
U17-3α, U17/U17-3
Type
230 x 35 x 96
Lug height
18.0 mm (0.906 in)
Iron core pitch
48 mm (3.780 in)
Circunference
3360 ± 10 mm (132.283 in)
Number of steel cords
48 ± 4 (1.890 in)
Steel cords lap length
260 mm (10.236 in)
Steel cords strength
3.92 KN (400 kgf) or more (882 lbf)
Thickness of crawler main part
23.0 mm (0.906 in)
Ditto joint parts
26.5 mm (1.043 in)
Core metal
FCD450 (Equiv.)
Number of core metal (Links)
35
Sprocket specifications Reference pitch Reference number of teeth P.C.D. (Pitch circle diameter) Sprocket pitch Sprocket number of teeth
90 -00.5 9.5 277.18 -02.5 45.62 19
Outer diameter
286 -02.5
Roller diameter
22
II-M-22
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
7. Steel track shoe RA231-2250-1 (230-37)
( ) : in
(0.87)
(1.65)
(1.73)
(0.55)
(Bushing) (Link) (Pin)
(9.06)
Over 25(0.98) (when assembled)
(5.91)
(0.63)
(3.03) (2.91) (2.28) (1.02)
(0.63)
(0.87)
(Link) (Bushing)
(3.54)
(3.54)
(0.91)
(2.20) (0.65)
(0.22)
(0.87)
(3.07)
(3.54)
(Inside) (Outside)
(Common for both ends)
Rubber pad (3.54)
(3.54)
(0.22)
(1.44)
(1.56)
(0.91)
(3.86)
(2.20)
(3.54)
(Inside) (Outside)
Tighten hex nuts to torque of 70 ~ 100 N·m (51.6 ~ 73.8 ft·lbf) 7.14 ~ 10.2 kgf·m. II-M-23
(Common for both ends)
WSM U17-3α/U17-3/U17 Mechanism
II. MACHINE BODY
II-M-24
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
II. MACHINE BODY Service Section A. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-S-3 a. b. c. d. e.
Machine Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Main Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lever Stroke and Operating Force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dimensions of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quality Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
II-S-3 II-S-3 II-S-4 II-S-5 II-S-14
B. FRONT ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-S-25 a. Pin, Bush and Shim Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-S-25 b. Instruction to Press in the Bushing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-S-29 c. Greasing Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-S-34
C. UPPER STRUCTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-S-39 a. b. c. d. f. g. h. i. j. k. l. m.
Swivel Bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Travel Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accelerator Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dozer Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Swing Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Service Port Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pilot Control Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limit Switch Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seat and Seat Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wrist Rest. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Canopy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
II-S-39 II-S-40 II-S-43 II-S-48 II-S-52 II-S-54 II-S-55 II-S-58 II-S-59 II-S-60 II-S-61 II-S-63
D. UNDERCARRIGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-S-65 a. Track Tension Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-S-65 b. Track Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . II-S-68
II-S-1
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
II-S-2
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
A. SPECIFICATIONS a. Machine Weight Iron crawler isn’t available for these models.
(1) KE, KDG, KUK-version
Canopy
Unit
U17-3α
STD arm / Rubber
kg
1650
STD arm / Iron
kg
1720
Unit
U17/U17-3
Rubber track
kgf (lbs)
1680 (3704)
Iron track
kgf (lbs)
1750 (3858)
(2) PP (KTC, KCL, KTA)-version
4 post Rops
Long arm is installed in standard version.
b. Main Specifications model
Engine
Excavating capacity Hydraulic pump P1, P2 P3
U17/U17-3 (PP)
Brand
KUBOTA
KUBOTA
Type
D902-BH-1
D902-E3-BH-2
PS/rpm
16.7/2300
16.3/2300
kW/rpm
12.3/2300
12.0/2300
3
898
898 (47.5)
1650 (3638)
1680 (3704)
Output
Machine weight
U17-3α (EU)
(in3)
Displacement
cm
Rubber track
kg (lbs)
Bucket
kN (kgf) lbf
15.2 (1550) 3147
←
Arm
kN (kgf) lbf
8.8 (900) 1978
←
Relief pressure
MPa (kg/cm2) psi
21.6 (220) 3129
←
Pump discharge rate
L/min (US GPM)
17.3 (4.57)
←
Relief pressure
MPa (kg/cm2) psi
18.6 (190) 2702
←
Pump discharge rate
L/min (US GPM)
10.4 (2.75)
←
II-S-3
WSM U17-3Îą/U17-3/U17 Service
II. MACHINE BODY
c. Lever Stroke and Operating Force Reference on new vehicle Unit
U17/U17-3, U17-3Îą
mm (in)
72 (2.83)
N (kgf) lbf
13.7 (1.4) 3.1
mm (in) mm (in)
2> = (0.079 > =) 72 (2.83)
Measured at the grip end
N (kgf) lbf
13.7 (1.4) 3.1
Measured 20 mm below the grip end
Play
mm (in)
Stroke
mm (in)
2> = (0.079 > =) 74 (2.91)
Measured at the grip end
Stroke Boom lever
Operating force Play Stroke
Arm lever
Operating force
Measured at the grip end Measured 20 mm below the grip end
N (kgf) lbf
13.7 (1.4) 3.1
Measured 20 mm below the grip end
Play
mm (in)
Stroke
mm (in)
2> = (0.079 > =) 74 (2.91)
Measured at the grip end
N (kgf) lbf
13.7 (1.4) 3.1
Measured 20 mm below the grip end
mm (in) mm (in)
2> = (0.079 > =) 75 (2.95)
Measured at the grip end
N (kgf) lbf
15.0 (1.5) 3.3
Measured 20 mm below the grip end
Clearance LH/RH lever at neutral position.
mm (in)
5 (0.197)
Longitudinal direction
Clearance LH/RH lever at most forward and backward position.
mm (in)
10 (0.394)
Longitudinal direction
Clearance LH/RH lever
mm (in)
2 ~ 5 (0.079 ~ 0.197)
N (kgf) lbf
33.3 (3.4) 7.5
mm (in)
80 (3.15)
Operating force
N (kgf) lbf
30.4 (3.1) 6.8
Lock lever, up
Operating force
N (kgf) lbf
19.6 (2.0) 4.4
Lock lever, down
Operating force
N (kgf) lbf
29.4 (3.0) 6.6
Swing pedal
Operating force
N (kgf) lbf
98.0 (10.0) 22.0
Travel high SW
Operating force
N (kgf) lbf
-
Bucket lever
Swivel lever
Operating force
Remarks
Operating force Play Stroke Operating force
Travel lever
Acceleration lever Dozer lever
Operating force Stroke
II-S-4
Lateral direction Measured 30 mm below the grip top Measured at the grip end Measured 20 mm below the grip end
Measured at the grip end Electric switch
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
d. Dimensions of Parts (1) Front pins and bush [Unit: mm (in)]
*
Location No.
Pin diameter x length
Bush inner dia. x outer dia. x length
(1)
φ35 x 257 (φ1.38 x 10.12)
φ35 x φ45 x 45 (φ1.38 x φ1.77 x1.77)
(2)
φ35 x 160 (φ1.38 x 6.30)
φ35 x φ45 x 35, 44 (φ1.38 x φ1.77 x1.38, 1.73)
(3)
φ35 x 160 (φ1.38 x 6.30)
φ35 x φ45 x 45 (φ1.38 x φ1.77 x1.77)
(4)
φ30 x 112.5 (φ1.38 x 4.43)
φ30 x φ40 x 35 (φ1.18 x φ1.57 x1.38)
(5)
φ30 x 96 (φ1.38 x 3.78)
φ30 x φ40 x 35 (φ1.18 x φ1.57 x1.38)
(6)
φ50 x 109 (φ1.38 x 4.29)
φ50 x φ60 x 37, 28, 40 (φ1.97 x φ2.36 x1.46, 1.10, 1.57)
(7)
φ50 x 109 (φ1.38 x 4.29)
φ50 x φ60 x 37, 28, 40 (φ1.97 x φ2.36 x1.46, 1.10, 1.57)
(8)
φ30 x 160 (φ1.38 x 6.30)
φ30 x φ40 x 35 (φ1.18 x φ1.57 x1.38)
(9)
φ30 x 142 (φ1.38 x 5.59)
φ30 x φ40 x 35 (φ1.18 x φ1.57 x1.38)
(10)
φ30 x 191 (φ1.38 x 7.52)
φ30 x φ38 x 35 (φ1.18 x φ1.50 x1.38)
(11)
φ30 x 142 (φ1.38 x 5.59)
φ30 x φ40 x 45 (φ1.18 x φ1.57 x1.77)
(12)
φ30 x 192.5 (φ1.38 x 7.58)
φ30 x φ40 x 35 (φ1.18 x φ1.57 x1.38)
(13)
φ30 x 192.5 (φ1.38 x 7.58)
φ30 x φ38 x 35 (φ1.18 x φ1.50 x1.38)
(14)
φ30 x 182 (φ1.38 x 7.17)
φ30 x φ38 x 35 (φ1.18 x φ1.50 x1.38)
(15)
φ30 x 182 (φ1.38 x 7.17)
φ30 x φ38 x 35 (φ1.18 x φ1.50 x1.38)
The working limits of the pins are 1.0 shorter than the reference on new vehicle.
Outside diameter
Length Outside diameter
Length
(New pin and bush tolerance) -0.05 -0.05 -0.05 pin:φ25 --0.05 0.08 , φ30 -0.07 , φ35 -0.07 , φ50 -0.07 +0.130 +0.130 +0.090 bush:Inner dia.φ25 +0.100 , φ30 +0.100 , φ35 +0.130 +0.100 , φ50 +0.060 +0.070 +0.100 +0.100 +0.100 Outer dia.φ38 +0.040 , φ40 +0.070 , φ45 +0.070 , φ60 +0.070
[Unit: mm]
-0.002 -0.002 -0.002 pin:φ0.98 --0.002 0.003 , φ1.18 -0.003 , φ1.38 -0.003 , φ1.97 -0.003 +0.005 +0.005 +0.004 bush:Inner dia.φ0.98 +0.004 , φ1.18 +0.004 , φ1.38 +0.005 +0.004 , φ1.97 +0.002 +0.003 +0.003 +0.003 +0.003 Outer dia.φ1.50 +0.002 , φ1.57 +0.002 , φ1.77 +0.002 , φ2.36 +0.002
II-S-5
[Unit: in]
Remarks
WSM U17-3Îą/U17-3/U17 Service
II. MACHINE BODY
(2) Bucket fixture dimensions Unit
U17-3Îą, U17/U17-3
A
mm (in)
45.3 (1.78)
B
mm (in)
2 x M12 x 1.25
C
mm (in)
45.3 (1.78)
D
mm (in)
45.3 (1.78)
E
mm (in)
16.5 (0.65)
F
mm (in)
3.95 (0.16)
G
mm (in)
865 (34.06)
H
mm (in)
2 (0.08)
I
mm (in)
180 (7.09)
J
mm (in)
167.5 (6.59)
K
mm (in)
104.5 (4.11)
L
mm (in)
735 (28.94)
M
mm (in)
173 (6.81)
N
mm (in)
175 (6.89)
O
mm (in)
85 (3.35)
Remarks
II-S-6
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
(3) Bucket link pin
[Unit: mm (in)] Parts name
Specifications
(1)
Bucket link 1
φ30 x 95.5 (φ1.18 x 3.76)
(2)
Bush A
φ30 x φ38 x W35 (φ1.18 x φ1.50 x W1.38)
(3)
Pin A dia
φ30 x 192.5 (φ1.18 x 7.58)
(5)
Bucket link 2, 3
φ30 - φ30 (φ1.18 - φ1.18)
(6)
Arm boss
φ55 x φ38 x L125.5 (φ2.17 x φ1.50 x L4.94)
(7)
Bush B
φ30 x φ38 x W35 (φ1.18 x φ1.50 x W1.38)
(8)
Pin B dia
φ30 x 192.5 (φ1.18 x 7.58)
(10)
Bucket cylinder L/S (stroke)
529 / 802 (269) (20.83 / 31.57 (10.59))
II-S-7
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
(4) Track roller (A) Reference on new vehicle (B) Allowable limit Unit
U17/U17-3, U17-3α
(a) Guide diameter
(A)/(B)
mm
φ73/69 (2.87/2.72)
(b) Outside diameter
(A)/(B)
mm
φ117/113 (4.61/4.45)
(c) Roller outside width
(A)/(B)
mm
135 (5.31)
(d) Roller guide width
(A)/(B)
mm
66 (2.60)
(e) Slide plate
(A)/(B)
mm
9/4 (0.35/0.16)
(c)
Remarks
Slide plate
(d)
(e)
(b) (a)
II-S-8
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
(5) Idler and sprocket (A) Reference on new vehicle (B) Allowable limit Unit
U17-3α, U17/U17-3
Remarks
202/196 (7.95/7.72)
Rubber Crawler
196/190 (7.72/7.48)
Steel Crawler
Idler (a) Outside diameter
(A)/(B)
mm (in)
(b) Guide width
(A)/(B)
mm (in)
27/23 (1.06/0.91)
(c) Idler width
(A)/(B)
mm (in)
60/55 (2.36/2.17)
Sprocket (d) Outside diameter
(A)/(B)
mm (in)
290/284 (11.42/11.18)
Sprocket (e) Wheel width
(A)/(B)
mm (in)
23/18 (0.91/0.71)
(c)
(e)
(a) (d)
(b)
II-S-9
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
(6)Dozer Unit
U17-3α, U17/U17-3
Remarks
(1)
Pin outside dia. - Length
mm (in)
φ30-102.5 (φ1.18-4.04)
(2)
Outside diameter - Length
mm (in)
φ30-84.5 (φ1.18-3.33)
(3)
Outside diameter - Length
mm (in)
φ30-84.5 (φ1.18-3.33)
(4)
Outside diameter - Length
mm (in)
φ30-95 (φ1.18-3.74)
Track cylinder mounting pin
(5)
Outside diameter - Length
mm (in)
φ25-133 (φ0.98-5.24)
Extension blade mounting pin
A
Width
mm (in)
1244/990 (48.98/38.98)
B
Height
mm (in)
261 (10.28)
C
Length
mm (in)
710 (27.95)
D
Tip wear thickness
mm (in)
t 9 (t0.35)
E
Distance between supports
mm (in)
434 (17.09)
Movement above ground/below ground
mm (in)
263/182 (10.35/7.17)
Dozer capacity
m
3 (ft3)
0.067 (2.25)
II-S-10
w/o Extension blade
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
(7) Bucket dimensions Unit
U17-3α, U17/U17-3
(1)
mm (in)
400 (15.75)
Lip outside width
(2)
mm (in)
456 (17.95)
Side cutter outside width
(3)
mm (in)
60.5 x 6 (2.38)
(4)
mm (in)
139.5 (5.49)
(5)
mm (in)
95.5 (3.76)
(6)
mm (in)
16 (0.63)
(7)
mm (in)
22 (0.87)
(8)
mm (in)
47.75 (1.88)
(9)
mm (in)
φ49 (1.93)
(10)
mm (in)
φ60 (2.63)
(11)
mm (in)
φ30 (1.18)
(12)
mm (in)
φ30 (1.18)
(13)
mm (in)
457 (17.99)
(14)
mm (in)
380.5 (14.98)
(15)
mm (in)
φ48.5 (1.91)
(16)
mm (in)
126.5 (4.98)
(17)
mm (in)
88.5 (3.48)
(18)
mm (in)
16.5 (0.65)
Remarks
φxt Arm end width
II-S-11
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
(8) Parts weight * The weights in the table below are approximate. Unit
U17-3α, U17/U17-3
kg (lbs)
1650 (3638), 1680 (3704)
Body weight
kg (lbs)
1340 (3527)
Maximum breaker weight
kg (lbs)
90 (198)
Backhoe overall
kg (lbs)
177 (390)
Swing bracket and boom cylinder not included
Upper swivel structure
kg (lbs)
816 (1799)
Canopy/cabin
Lower travel structure
kg (lbs)
577 (1272)
Rubber crawler
Track frame
kg (lbs)
61/83/61 (135/183/135)
Left/center/right
Swivel frame
kg (lbs)
150 (331)
Machine weight
Swing bracket
kg (lbs)
28 (62)
Boom
kg (lbs)
67 (148)
Arm
kg (lbs)
30 (66)
Bucket
kg (lbs)
29 (64), 40 (88)
Remarks Rubber track
450-400
Dozer
kg (lbs)
67 (148)
Counterweight
kg (lbs)
205 (452)
Iron crawler
kg (lbs)
89 (196)
Rubber crawler
kg (lbs)
56 (124)
Unit
U17-3α, U17/U17-3
Engine
kg (lbs)
64 (141)
Dry weight
Hydraulic tank
kg (lbs)
13 (29)
With filter
Fuel tank
kg (lbs)
1.6 (3.5)
Swivel bearing
kg (lbs)
17 (38)
Battery
kg (lbs)
13 (29)
Track roller
kg (lbs)
4 (8.8)
Upper track roller
kg (lbs)
-
Sprocket
kg (lbs)
5 (11.0)
Idler
kg (lbs)
18 (40)
Canopy roof
kg (lbs)
9 (20)
Post (support)
kg (lbs)
21 (46)
Pump assembly
kg (lbs)
14 (31)
Wheel motor
kg (lbs)
17 (38)
Swivel motor
kg (lbs)
15,(33)
Control valve
kg (lbs)
14 (31)
Boom cylinder
kg (lbs)
15 (33)
Arm cylinder
kg (lbs)
12 (27)
Bucket cylinder
kg (lbs)
11 (24)
Swing cylinder
kg (lbs)
9 (20)
Dozer cylinder
kg (lbs)
7 (15)
Rotary joint
kg (lbs)
13 (29)
Radiator
kg (lbs)
2 (4.4)
II-S-12
Remarks
Sprocket included
Without joint
Offset
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
(9) Water and Oil Quantity Unit
U17-3α, U17/U17-3
Radiator soft water
L (US gal)
2.6 (0.713)
Reserve tank soft water
L (US gal)
0.56 (0.159)
Crankcase engine oil (at filter replacement)
L (US gal)
3.6 (0.295)
Class CF/CF-4 10W30
Hydraulic tank oil
L (US gal)
13 (3.434)
ISO VG 46
Total hydraulic oil
L (US gal)
21 (5.812)
ISO VG 46
Wheel motor gear oil
L (US gal)
0.25 (0.066)
Swivel reduction gear oil
L (US gal)
-
Track roller gear oil
cc (cu-in)
40 (2.44)
Carrier roller (upper roller)
cc (cu-in)
- (-)
Front idler
cc (cu-in)
30 (1.83)
Engine Oil SAE 30 Class CD
Fuel tank light oil (full)
L (US gal)
19 (4.755)
Diesel fuel No. 3
II-S-13
Remarks Kubota LLC-N-50F
SAE 90 (API, GL-4) Engine Oil SAE 30 Class CD Grease EP2
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
e. Quality Specifications (Installation: Rubber track, standard arm and bucket.) No Q1 1 1
2
3
4
Specifications Items Main Speed JIS A8404 Machine size Total length (Transport)
2
Total width
3
Total height (Canopy)
4
Total height (Cabin)
1
Weight
Machine weight (Canopy)
2
Machine weight (Cabin)
3
Ground contact press. (Canopy)
4
Ground contact press. (Cabin)
1 2
Performance
Swivel speed Travel speed F1
3
F2
4
R1
5
R2
6 1
Gradeability Rear end min. turning radius
2
Swivel frame rear ground clearance
3
Tumbler center distance
4
Crawler total length
5
Crawler total width
6
Crawler shoe width
7
Min. ground clearance
Unit
U17-3α (EU) / U17/U17-3 (PP)
mm inch mm inch mm inch mm inch kg lbs kg lbs kPa psi kgf/cm2 kPa psi kgf/cm2 rpm km/h mph km/h mph km/h mph km/h mph deg. mm inch mm inch mm inch mm inch mm inch mm inch mm inch
II-S-14
3570 ± 102.4 ± 1240 / 990 ± 48.8 / 39.0 ± 2300 ± 90.6 ± 1600 ± 3527.4 ± 27.73 4.02 0.28
Remarks
52 2.05 12 0.5 23 0.9
32 70.5
Fuel tank full
0.9 0.2 0.12 0.4 0.25 0.2 0.12 0.4 0.25
Rated engine RPM, η = 100%
9.1 2.1 1.31 4.1 2.55 2.1 1.31 4.1 2.55 30 620 24.4 422 16.6 1230 48.4 1587 62.5 1240 / 990 48.8 / 39.0 230 9.1 150 5.9
± ± ± ± ± ± ± ± ± < ± ± ± ± ± ± ± ± ± ± ± ± ± ±
12 0.5 8 0.3 37 1.5 48 1.9 26 1.0 5 0.2 4 0.2
WSM U17-3α/U17-3/U17 Service
No 5
6
1
Specifications Items Engine
Rated output
3 4
Rated speed Displacement
Hydraulic pump type Pump delivery P1,P2 P3 P4
4
Main relief pressure (Bench set)
P1,P2
P3
5
7 8
9
1 1 2 3 1 2
Main relief pressure (Bench set)
Unit
U17-3α (EU) / U17/U17-3 (PP)
Model name
2
1 2
II. MACHINE BODY
P4
Swivel motor type Under carriage Travel motor type Parking brake type Crawler shoe type Front attachment Bucket CECE heaped capacity SAE, JIS
3
Bucket width
4 5 6
Swing angle L R Max. digging radius
7
Ground level Max. digging radius
8
Ground level Min. finish radius
9
Max. digging depth
kW ps rpm L cc US gal L US gal L US gal L US gal MPa
21.6
+1.0 -0.5
kgf/cm2
220
+10 -5
bar
216
+9.8 -4.9
psi
3128
+142 -71
MPa
18.6
+1.0 -0.5
kgf/cm2
190
+10 -5
bar
186
+9.8 -4.9
psi
2702
+142 -71
MPa
3.9
+0.3 -0.2
kgf/cm2
40
+3 -2
bar
39
+3 -2
psi
569
m3 yd3
Remarks
EU: D902-BH-1 PP: D902-E3-BH-2 11.6 ± 0.2 13.0 ± 0.3 2300 0.898 898 0.184 Variable x2 + gear 17.3 4.38 10.4 2.75 6.2 1.64
+43 -28
Piston motor Hi-Low type Rubber 0.04 ± 0.002 0.05 ± 0.003
m3 yd3 mm inch deg. deg. mm inch mm inch mm inch mm inch
II-S-15
0.04 ± 0.002 0.05 ± 0.003 456 18.0 63 58 3901 153.6 3843 151.3 1320 52.0 2306 90.8
± ± ± ± ± ± ± ± ± ± ± ±
10 0.4 2 2 59 2.3 58 2.3 26 1.0 46 1.8
Without side cutter
Bucket bottom horizontal
WSM U17-3α/U17-3/U17 Service
No 9
II. MACHINE BODY
Specifications Items
10 Front attachment Max. vertical digging depth 11
Max. digging height
12
Max. dump height
13
Max. dump height (Arm vertical)
14
Min. turning radius
15
Min. turning radius (Left swing)
16
Off-set amount
17
L R
18
Max. digging force
19
Optional JIS, SAE bucket range
10 1
Blade
Width
2
Height
3
Length
4
Max. lift above GL
5
Max. below GL
6
Displacement capacity
11 1
Water & oil
Radiator capacity
2
Reserve tank capacity
3
Engine crank case
4
Hydraulic oil Full (all amount)
5
Hydraulic oil Tank (tank gauge)
6
Wheel motor
7
Swivel reduction case
8
Track roller
9
Front idler
Unit
U17-3α (EU) / U17/U17-3 (PP)
mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch kgf kN lbw
1911 ± 38 75.2 ± 1.5 3536 ± 71 139.2 ± 2.8 2443 ± 49 96.2 ± 1.9 1426 ± 43 56.1 ± 1.7 1207 ± 36 47.5 ± 1.4 510 ± 15 20.1 ± 0.6 385 ± 12 15.2 ± 0.5 1491, 1412< 14.6, 13.8< 3280, 3106<
m3 yd3 mm inch mm inch mm inch mm inch mm inch
1244 / 990 49.0 / 39.0 265 10.4 281 11.1 192 7.6
± ± ± ±
5 0.2 5 0.2
± ± ± ±
13 0.5 9 0.4
Remarks
m3 yd3 L US gal L US gal L US gal L US gal L US gal L US gal L US gal L US gal L US gal
II-S-16
3.6 0.95 0.56 0.15 3.6 0.95 21 5.55 13 3.43 0.25 0.07 0.04 0.01 0.03 0.01
With oil filter
WSM U17-3α/U17-3/U17 Service
No
Specifications Items
Unit
Fuel tank
L US gal
11 10 Water & oil Q2 1 1
2
3
4
5
6
II. MACHINE BODY
Main Specs JIS A8404 Bucket tooth sluggish
2
Decline of front attachment
3
Blade's declination
1
Eccentric amount from swing center
2
Distance to swing center
1
Distance to boom pin
2
Boom pin height
3
Min. clearance of bucket teeth to boom cylinder protector
4
Clearance of boom cylinder to shoe
1 2
Approach angle Distance to blade tip
3
Distance of crawler end to blade
4
Clearance of blade to weight
1
Crawler height
2
Max. crawler height
3
Clearance of swivel frame to crawler
4
Distance to idler center
5
Distance to sprocket center
6
Protrusion amount of upper frame to crawler outer end
1
Swivel frame height
2
Height to step
3
Height to seat
4
SIP (ISO)
L/R
U17-3α (EU) / U17/U17-3 (PP)
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
73 2.87 0 0.00 0 0.00 -
mm
37
inch
1.46
mm inch deg. mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch
29.4 354 13.94 354 13.94
II-S-17
Remarks
17.5 ± 0.9 4.62 ± 0.24 ± ± ± ± ± ±
93 3.66 10 0.39 10 0.39 From swivel center
Exclude grouser +34 -16 +1.34 -0.63
± 3.0 From swivel center
± ± ± ±
7 0.28 7 0.28
Include grouser on the sprocket
From swivel center
Include rubber mat
WSM U17-3α/U17-3/U17 Service
No Q3 1 1
2
3 4 5 6
Specifications Items Engine performance Max. engine SAE J 1995 Gross torque
2 1 2 3 4 1
Torque rise Max. engine rpm no load 1 pump relief 2 pump relief 3 pump relief Idling rpm
1 1 2 1 2
Engine start time (Normal temp and grow) Cold start Cell start time Number of start Charge starting engine Charging voltage alternation & ampere Travelling performance Travel motor block performance, L/R
Q4 1 1 2
1
Max. Traction force
2
3
4
1
Travel straightness
F1
2
R1
3
Blade F1
4
Blade R1
1
Q5 1 1
Track shoe sag distance
1
Work performance Work amount 45 deg digging & side dump
Cycle time
2 1 2
Steel Rubber
2
3
F1
F2
2
2
II. MACHINE BODY
Fuel consumption
Unit kgf·m N·m ft·lbs % rpm rpm rpm sec.
5.57 54.6 40.3 9.2 2600
rpm
1350
Remarks
5.31 52.1 38.4 6.8
2300 < 2300 <
Arm + bucket Arm + bucket + dozer
+150 0
Glow 5 sec Temp. -17°C
rpm Battery spec 12V 40A
mm inch kgf kN lbs kgf kN lbs mm inch mm inch mm inch mm inch mm inch mm inch
300 11.81 1437 14.08 3161 720 7.06 1584 600 23.62 600 23.62 600 23.62 600 23.62 25 0.98 10 0.39
> > ± ± ± ± ± ± > > > > > > > > to to to to
20 deg, 10 min 126 1.24 278 64 0.63 141
η = 65%
10 m distance
Blade up & down 10 m distance
30 1.18 15 0.59
m3/h
Digging, 180 deg loading 45 deg digging & side dump
yd3/h sec.
Digging, 180 deg loading
sec.
Actual
/ / / / >
sec. sec.
yd3/h m3/h
Calculated
U17-3α (EU) / U17/U17-3 (PP)
L/h US gal/h L/h US gal/h
II-S-18
Load coefficiency = 60%
WSM U17-3α/U17-3/U17 Service
No 4
II. MACHINE BODY
Specifications Items
1
Boom lifting capacity
2
Arm digging force
3
Bucket digging force
4
Blade force
up
down
5 6 7 8 9
1 2 1 2 1 2 1 2 1 2
Boom speed Arm speed Bucket speed Blade speed Swivel angle while boom raise Inching performance
10 1 2
Arm cylinder cavitation Arm cylinder shrink
11 1 12 1
Blade cylinder cavitation Bucket outer width
2 13 1
up down crowd extend crowd dump up down
Unit
U17-3α (EU) / U17/U17-3 (PP)
kgf kN lbw kgf kN lbw kgf kN lbw kgf kN lbw kgf kN lbw sec. sec. sec. sec. sec. sec. sec. sec. deg. mm inch
863, 824< 8.46, 8.07< 1903, 1817< 1491, 1412< 14.6, 13.85< 3287, 3113<
mm inch without side cutter with side cutter
Max. digging height radius
2
Max. dump height radius
3
Distance max. digging depth
4
Bucket bottom height at arm vertical
5 6
Bucket wrist angle Bucket bottom angle
7
Distance to bucket tooth tip
min.
8
Distance to bucket tooth tip
Bucket bottom horizontal
9
Item 7 to sprocket center
mm inch mm inch mm inch mm inch mm inch mm inch deg. deg. mm inch mm inch mm inch
II-S-19
Remarks Front end, Arm extend bucket crowd, at tooth Bucket tooth root
Machine stance to JIS bucket tooth root Cutting edge down force at ground level
2.1 2.5 3.3 2.4 2.7 1.8 1.7 2.1
± ± ± ± ± ± ± ±
0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3
5 > 0.2 >
2015 79.33 2012 79.21
± ± ± ±
Oil temp. 50 ± 5°C Max. height to ground
Max. down to max. up Max. up to max. down GL-Max. height, before cushioning CV spool stroke Oil temp. 50 ± 5°C Oil temp. 95 ± 5°C, 1300 rpm, bucket heaped, load
202 7.95 121 4.76
at bucket pin From swivel center
1200 ± 36 47.24 ± 1.42 180 ± 3
Bucket horizontal
Boom up, arm extend bucket crowd From swivel center
WSM U17-3α/U17-3/U17 Service
No
II. MACHINE BODY
Specifications Items
13 10 Item 7 to blade
12 Item 8 to blade Swivel, swing performance Swivel torque
2
L
R
2 3 4
1 1 1
Swivel capable angle at slope Swivel block performance L/R Swivel slippage (Flat ground, no L / R load)
5 6
1 1
Swivel start-up speed Swivel torque, max.
7
1 2 1
Swing speed
2
Reciprocating motion
8
Q7 1 1
Left / Right
Left Right Swivel R&L
Swing Lock L/R
Hydraulic performance Relief pressure setting
Swing
kgf·m kN·m ft·lbs kgf·m kN·m ft·lbs deg. deg. deg. deg. sec. kgf·m N·m ft·lbs sec. sec. mm inch mm inch
P1, P2
kgf/cm2 MPa bar psi
2
P3
3
P4
kgf/cm2 MPa bar psi kgf/cm2 MPa bar psi
2
1
Swivel brake relief pressure
3
1
Suction negative pressure
4
1
Boom relief pressure
U17-3α (EU) / U17/U17-3 (PP)
Remarks
mm inch mm inch mm inch
11 Item 8 to sprocket center
Q6 1 1
Unit
255, 217< 2.5, 2.1< 1844, 1569< 255, 217< 2.5, 2.1< 1844, 1569< 18 < 30 >
Arm extend, slow/quick
Bucket load = JIS heaped x 1.8 90 deg swivel
2.1 ± 0.2 255 2.5 1844 4.6 ± 0.3 3.7 ± 0.3 6 > 0.24 >
0 ~ 90 deg swivel
90 deg-swivel, 100 times actual digging cylinder dislocation 90 deg-swivel, 100 times
At pump delivery port
kgf/cm2 MPa bar psi kgf/cm2 MPa bar psi
At pump delivery port
kgf/cm2 MPa bar psi
At +50°C
II-S-20
At -10°C
50 ± 5°C
WSM U17-3α/U17-3/U17 Service
No 5
6
7 8
1
II. MACHINE BODY
Specifications Items Cylinder oil sealing capacity
Boom
2
Arm
3
Bucket
4
Blade
1 2 3 1 1
Boom cushioning performance
Accumulator function time Service port flow
2 Q8 1 1
30°C 50°C 80°C No load Load
Lever operating force & stroke Boom lever operating force
up 1st
2
up 2nd
3
down
4
Arm lever
Dump / crowd
5
Bucket lever
Dump / crowd
6
Swivel lever
L/R
7
Blade lever
Up / down
8
Travel lever
L/R F/R
9
Accelerator lever
10 Swing pedal
Unit
U17-3α (EU) / U17/U17-3 (PP)
mm inch mm inch mm inch mm inch sec. sec. sec. sec. L US gal L US gal kgf N lbf kgf N lbf kgf N lbf kgf N lbf kgf N lbf kgf N lbf kgf N lbf kgf N lbf kgf N lbf kgf N lbf
II-S-21
25 0.98 15 0.59 10 0.39 25 0.98 3 0.5 0.3
> > > > > > > > > to 1.5 <
Remarks Arm extend, bucket height 1 m, 10 min. Bucket load = JIS heaped*1.8
27 8.14 At 50 kgf/cm2
1.4 ± 0.5 13.7 ± 4.9 3.1 ± 1.1
1.4 13.7 3.1 1.4 13.7 10.1 1.4 13.7 10.1 1.4 13.7 10.1 3.1 30.4 22.4 1.5 14.7 10.8 3.4 33.3 25 7.0 68.6 15.4
± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ±
0.5 4.9 1.1 0.5 4.9 3.6 0.5 4.9 3.6 0.5 4.9 3.6 0.5 4.9 3.6 0.5 4.9 3.6 1.5 14.7 10.8 0.7 6.9 1.5
20 mm lower the lever top
Extend & crowd 20 mm lower Dump & crowd 20 mm lower Left & right 20 mm lower Up & down 20 mm lower F&R 20 mm lower 30 mm lower
WSM U17-3α/U17-3/U17 Service
No 1
II. MACHINE BODY
Specifications Items
11 Safety lock lever, L&R
up
down
12 Travel Hi-Lo change
13 Service port pedal
L/R
14 Bonnet lifting force
15 TPSS lever (PP-version)
2
1
Boom lever stroke
2
up down
3
Arm lever stroke
4
Bucket lever stroke
5
Swivel, swing lever stroke
6
Blade lever up & down
7
Travel lever, F & R
L R
8
Accelerator lever stroke
9
Swing pedal stroke
10 Service port pedal stroke
Unit
U17-3α (EU) / U17/U17-3 (PP)
kgf N lbf kgf N lbf kgf N lbf kgf N lbf kgf N lbf kgf N lbf mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch
II-S-22
2.0 19.6 14.5 3.0 29.4 21.7 5.0 49.0 36.2
± ± ± ± ± ±
Remarks
1.0 9.8 7.2 1.0 9.8 7.2 Electrical push-type switch on the dozer lever
± 1.0 ± 9.8 ± 7.2
10.0 ± 98 ± 22 ± 72 ± 2.83 ± 72 ± 2.83 ± 72 ± 2.83 ± 74 ± 2.91 ± 74 ± 2.91 ± 80 ± 3.15 ± 75 ± 2.95 ± 75 ± 2.95 ± 99 3.9 6 ± 0.24 ± 12 ± 0.47 ±
1.0 9.8 2.2 10 0.39 10 0.39 10 0.39 10 0.39 10 0.39 10 0.39 10 0.39 10 0.39
10 0.39 10 0.39
Tip of the grip
Pedal edge
WSM U17-3α/U17-3/U17 Service
No Q9 1 1
II. MACHINE BODY
Specifications Items Stability Tipping load/distance of load point to tipping point
Front, Blade up
2
Front, Blade down
3
Rear, Blade up
4
Side (variable track)
2
1 2 3
Dynamic operation limit slope angle
STD arm Long arm Telescopic arm
3
1
Bucket limited load, static
Side
Extended
2
Forward
3
Retracted
4
4
1
Forward
Bucket limited Extended load, slow operation
2
Side
Forward
3
Retracted
4
Q10 1 1 2 3
Side
Side
Forward
Comfortability Noise level
At operaCanopy tor's ear LPA Cab Noise source± LWA
Unit
U17-3α (EU) / U17/U17-3 (PP)
kgf·m N·m ft·lbs kgf·m N·m ft·lbs kgf·m N·m ft·lbs kgf·m N·m ft·lbs deg. deg. deg.
Arm extend, bucket crowd
Swivel angle = 0 deg. Blade up, side direction
kgf N lbs kgf N lbs kgf N lbs kgf N lbs kgf N lbs kgf N lbs kgf N lbs kgf N lbs
188, 162< 1842, 1558< 376, 357< 215, 175< 2107, 1715< 473, 386< 110, 95< 931< 209< 188, 175< 1078, 1715< 414, 386< 138, 121< 1352, 1186< 304, 267< 152, 130< 1490, 1274< 334, 287< 66, 63< 647, 619< 145, 139< 152, 130< 1490, 1274< 334, 287<
dB(A) dB(A) dB(A)
78> / 79> 92 >
II-S-23
Remarks
Front horizontal, bucket crowd arm tip end load swing straight dozer up. Bucket weight 37 kgf isn’t included.
Arm extended, bucket crowd, dozer up swing straight. Bucket weight 37 kgf isn’t included.
Cab door close
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
II-S-24
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
B. FRONT ATTACHMENT a. Pin, Bush and Shim Installation (1) Swing cylinder, swing bracket, boom 51
52
50
53
43 42 41 72 71
40
70 60
61 62
21 22
20
23 24
Swing bracket - swivel frame Code No. RB2386645 RB2386639 RB2386638 RB2384113 0117361204 0257250120
Q’ty 2 2 2 2 2 2
Part Pin Bush Bush Bush Bolt Nut
No.
Remarks
10 11 12 13 14 15
φ 50 (φ 1.97in) 506037 506028 506040
No.
Remarks
12 13 35 34 11 30
10
32
14 15
Swing bracket - boom cylinder Code No. RB2386664 RB2386659 RB2386637 0117361080 0257450100
Q’ty 1 1 1 1 1
Part Pin Bush Bush Bolt Nut
20 φ 35 (φ 1.38in) 21 354332 22 354348 23 24
Swing bracket - boom Code No. RB2386656 RB2386646 RB2376657 RB2376658 0117361204 0257450100 0661115010
Q’ty
Part
No.
Remarks
1 2 1 1 1 1 1
Pin Bush Bush Bush Bolt Nut Grease nipple
30 31 32 33 34 35 36
φ 35 (φ 1.38in) 354535 354344 354344
No.
Remarks
RB2386746 0113361020 691816644 535825356
Q’ty 1 1 1 1
Part Pin Bolt Spacer Washer
Code No.
Q’ty
RA22166481 0113361020 6718166441 5358253561
1 1
36
1
Part Pin Bolt Spacer Washer
No.
Remarks
50 φ 30 (φ 1.18in) 52 54 55
Boom - boom cylinder Code No.
40 φ 30 (φ 1.18in) 41 42 43
33
Swing bracket - Swing cylinder
RB2386664 0117361080 0257450100
Swing bracket - Swing cylinder Code No.
31
Q’ty 1 2 1
Part
No.
Remarks
60 φ 35 (φ 1.38in) 61 62
Pin Bolt Nut
Boom - arm cylinder Code No. RB2386654 0117361080 0257450100
Q’ty 1 2 1
II-S-25
Part Pin Bolt Nut
No.
Remarks
70 φ 30 (φ 1.18in) 71 72
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
(2) Arm, bucket link
114 111
125 124 123
90
121
92 91
100
126 122
102 101
110 120 112113
83 82
133 132
81
130
131
134 80
142 145 144 143
146 140 141 Arm - bucket
Boom - arm Code No. RB2386663 687216652Δ 0117361080 0257450100 0661115010
Q’ty
Part
1 2 1 1 1
Pin Bush Bolt Nut Grease nipple
No.
Remarks
80 φ 30 (φ 1.18in) 81 303835 82 83 84
Arm - arm cylinder Code No.
Q’ty
RB2386665Δ 0117361065 0257450100
1 1 1
Part
No.
Arm - bucket cylinder Code No. RB2386665 0117361065 0257450100
Q’ty 1 1 1
Part
No.
Remarks
100 φ 30 (φ 1.18in) 101 102
Pin Bolt Nut
Arm - bucket link2, 3 Code No. RB2386675 687216652 0117361080 0211860100 0661115010
Q’ty
Part
1 2 1 2 1
Pin Bush Bolt Nut Grease nipple
No.
Q’ty
Part
1 1 2 2 1 1 1 1
Pin-EU Pin-PP Bush Dust seal Bolt Plain washer Spacer Grease nipple
No.
Remarks
120 φ 30 (φ 1.18in) 120 φ 30 (φ 1.18in) 121 303835 122 123 124 125 126
Remarks
90 φ 30 (φ 1.18in) 91 92
Pin Bolt Nut
Code No. RA22166761 RB2386676Δ 687216652Δ RA11167331 0113361225 0401560120 6874166921 0661115010
Remarks
110 φ 30 (φ 1.18in) 111 303835 112 113 114
Bucket link1 - link2, 3 Code No.
Q’ty
Part
RB23866771 RB23866781 0117361080 0211860100 0661115010
1 2 1 2 1
Pin Bush Bolt Nut Grease nipple
No.
Remarks
130 φ 30 (φ 1.18in) 131 303840 132 133 134
Bucket link1 - bucket Code No.
Q’ty
Part
RA22166761 RB2386676Δ 6872166521 RA11167331 0113361225 0401560120 6874166921 0661115010
1 1 2 2 1 1 1 1
Pin-EU Pin-PP Bush Dust seal Bolt Plain washer Spacer Grease nipple
II-S-26
No.
Remarks
140 φ 30 (φ 1.18in) 120 φ 30 (φ 1.18in) 141 303835 142 143 144 145 146
84
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
(3) Blade, blade cylinder and truck cylinder
153 152 151 150 154
170
171172173 181182
160
180
163 162 161
191 192 190
Truck frame - blade Code No.
Q’ty
RA21174441
2
0113361020 6918166441 5358253661 0661625010
2 2 2 2
Blade - blade cylinder Part
No.
Remarks
150 φ 30 x 102.5L (φ 1.18 x L4.04 in) Bolt 151 Collar 152 Washer 153 Grease nipple 154 Pin
Truck frame - blade cylinder Code No.
Q’ty
Part
RB2387446
1
Pin
0113361020 5358253661 0661625010
1 1 1
Bolt Collar Washer
No.
Remarks
160 φ 30 x 84.5L (φ 1.18 x L3.33 in) 161 162 163
Code No.
Q’ty
Part
RB2387446
1
Pin
0113361020 5358253661 0661625010
1 1 1
Bolt Collar Washer
No.
Remarks
170 φ 30 x 84.5L (φ 1.18 x L3.33 in) 171 172 173
Truck frame - truck cylinder Code No.
Q’ty
RA21121441
2
691912129 0451260120
2 2
Part
No.
Remarks
180 φ 30 x 95L (φ 1.18 x L3.54 in) Bolt (Stopper) 181 Washer 182 Pin
Blade - extension blade Code No.
Q’ty
RA21121441
2
Pin
0552551000 RG1088948
2 2
Split pin Pin
II-S-27
Part
No.
Remarks
190 φ 25 x 113L (φ 0.98 x L4.45 in) 191 192
WSM U17-3Îą/U17-3/U17 Service
II. MACHINE BODY
(4) Clearance adjustment (1)
(6)
(7)
(2)
(8)
(3) (9)
(4)
(5) (1) 68721-6697 Shim (0.5, 60-31) SPCC 68051-6633 Shim (1.0, 60-31) SPCC Selective use 68051-6634 Shim (1.6, 60-31) SPCC * Insert a number of shims according to the clearance on the swing cyl bottom side. (2) RA211-6647 Shim (0.3, 70-36) SPCC RB211-6762 Shim (0.5, 70-36) SPCC 68741-6688 Shim (1.0, 70-36) SPCC Selective use 68741-6689 Shim (1.6, 60-36) SPCC RA211-6649 Shim (2.0, 70-36) SPCC (3) RB238-6644 Thrust collar (2.3, 92-51) SK5M * Refer to the mounting method of thrust collar.
1. Front Play * Pin on fulcrum Thrust direction Clearance
0.6 mm (0.023 in) max. * If the play exceeds 0.6 mm, add some shims and make adjustments. (Use the shims shown in the illustration.)
2. Vertical clearance between swivel frame and swing bracket.
+ 0.3 ~ +1.3 mm (+ 0.012 ~ +0.051 in)
(4) RB238-6644 Thrust collar (2.3, 92-51) SK5M RB238-6648 Thrust collar (2.0, 92-51) SK5M Selective use RB238-6649 Thrust collar (2.5, 92-51) SK5M * Refer to the mounting method of thrust collar.
4. Installation of thrust collar
} }
3. Use the shim and thrust collar selectively with each part.
Apply grease
(5) RG401-6762 Shim (0.5, 70-36) SPCC (6) 68721-6697 Shim (0.5, 60-31) SPCC 68051-6633 Shim (1.0, 60-31) SPCC (7) 68721-6697 Shim (0.5, 60-31) SPCC 68051-6633 Shim (1.6, 60-31) SPCC (8) 68721-6697 Shim (0.5, 60-31) SPCC 68051-6633 Shim (1.0, 60-31) SPCC (9) 68721-6697 Shim (0.5, 60-31) SPCC 68051-6633 Shim (1.0, 60-31) SPCC
Apply grease on both surface.
} Selective use } Selective use } Selective use } Selective use
A clearance of 1-2 mm to be ensured between lock-bolt tightened face and nut
Lock nut type
II-S-28
Double nut type
WSM U17-3Îą/U17-3/U17 Service
II. MACHINE BODY
b. Instruction to Press in the Bushing (1) Bush installation steps Part where bushing and dust seal are inserted. 1. Bushing insertion (Completed assembly with bushing press-fit is excluded.) 2. Bushing insertion dimension
1) If no dust seals are used, check that the bushing does not protrude from either side. 2) Maintain room for a dust seal on each side if it is used. (Only the dimension management of the press-fit direction can be enough.)
3. Dust seal mounting direction
Mount as shown in the illustration.
4. Bushing insertion direction
Insert the bushing from the 15° chamfer side.
(2)
(2) (2) (1)
(1)
(1) Both bushing and dust seal (2) Only bushings
Insert the bushing by using an appropriate steel plate. * Do not directly hit the bushing.
(2) Installing direction of dust seal Bush
Dust Seal
Install the dust seals in the direction as shown at left. If in the wrong direction, the sealing effect is adversely affected, which may get the pins worn out earlier. (Enlarged view of dust seal)
OutSide
Toward the Bushing
Press in
Jig
Bush
Bush
5
5
3 15
Dust seal
C
15
0. 5
3
Dust seal
Bush direction
C
0.
5
Bush direction
II-S-29
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
(3) Installation of thrust collar on the swing bracket
Thrust collar
1. Install the thrust collar, with its grooved face downward, on top of the swivel frame. 2. Select and install a 0.5 or 1.0 mm (0.02 ~ 0.04”) thick shim to have the clearance smaller than 0.5 mm (0.02”). Thrust collar 090: 2.3 mm (0.09 in) 095: 2.3, 2.0, 2.5 selective Shim 200: 0.5, 1.0, 1.6 selective
II-S-30
WSM U17-3α/U17-3/U17 Service
II. MACHINE BODY
(4) Swing bracket pin & bush (1)
(1)Attention to the bush driving direction (align the holes). Make sure later that the shaft goes through smoothly. (2)Keep flush with the end face. (3)Keep the collar upward. (4)Attention to the bush driving direction (align the holes). Make sure later that the shaft goes through smoothly.
(2) 2
3 (3)
(4)
1
(2)
1 Bush 2 Dust seal 3 Collar
(3)
Specifications, New pin and bushing [Unit: mm (inch)] Model Pin outer dia. Pin material Bush inner dia. Bush outer dia. Bush material
KX008-3, U10-3
KX36-3, KX41-3S, V
U17/U17-3, U17-3α
U20-3, U25-3α
-0.002 o 35 --0.05 0.08 ( o 1.38 -0.003 )
-0.002 o 50 --0.05 0.08 ( o 1.97 -0.003 )
←
-0.002 o 60 --0.05 0.08 ( o 2.36 -0.003 )
←
←
S45C-D, S43C-D
+0.011 +0.006
← +0.011
←
o 60
+0.004 o 43 +0.09 +0.06 ( o 1.69 +0.002 )
+0.004 o 60 +0.09 +0.06 ( o 2.36 +0.002 )
←
+0.004 o 72 +0.09 +0.06 ( o 2.83 +0.002 )
STKM16A S43C S45C
←
←
←
( o 1.38
Thrust washer, shims thickness
)
o 50
+0.07 +0.04
( o 1.97
Thrust collar : 2.0, 2.3, 2.5 Shim : 0.5, 1.0, 1.6
Swing bracket material Test pin, to go through smoothly
+0.011 +0.006
)
o 35
+0.07 +0.04
FCD500-7 -
o 49.95 ( o 1.967)
pin: High frequency induction surface hardening/ Effective hardened depth: 2 ~ 4mm (0.08” ~ 0.16”) Surface hardness: 52 ~ 59 HRC Diameter value is for single part before installation.
II-S-31
←
+0.07 +0.04
( o 2.36 +0.006 )
Thrust collar : 2.8, 3.2 Shim : 0.5, 1.0, 1.6
←
←
←
-
Remarks
WSM U17-3Îą/U17-3/U17 Service
II. MACHINE BODY
(5)Measuring the swing bracket looseness Set a dial gauge as shown below and note the height of the pointer. Lift the machine front until the swing bracket tilts to maximum frontward. Now set the dial gauge reading to zero. Next move the boom and arm until the swing bracket tilts to maximum backward. Now take the dial gauge reading. There is no specifications yet. This measuring method is just for your reference. Swing bracket looseness measuring procedure photos
II-S-32
Thank you very much for your reading. Please Click Here Then Get More Information.