FOR COMPRESSED AIR SYSTEMS Our electronic condensate drains carry the highest level of product quality and reliability. Continued research and development has resulted in to the most reliable and widest condensate drain program in the world. We offer a reliable solution for all compressed air condensate management applications.
SMART GUARD PRO ELECTRONIC AND CAPACITIVE SENSING - ZERO AIR LOSS DRAIN There is no loss of compressed air during the discharge of condensate. One model for all compressor capacities up to 85m3/min including a bottom inlet for applications with low-to-the-floor draining points
SMART GUARD
OPTIMUM TIMER CONTROLLED DRAIN The OPTIMUM is suitable for all compressed air system components and incorporates a wide voltage range. Other options include a high pressure range up to 400 bar and a fully serviceable valve design
OPTIMUM
COMBO TIMER CONTROLLED DRAIN The Combo offers all the advantages of a timer controlled drain and in addition has the security of an integrated (mesh) strainer, preventing large particles from blocking the valve orifice.
COMBO
EZ-1 TIMER CONTROLLED DRAIN The EZ-1 has been designed especially for economy applications. It is a mass produced, no options drain though still incorporating the flexibility to be widely applied with a high product reliability factor.
EZ-1
TEC-11 TIMER CONTROLLED DRAIN FOR FILTERS The unit is designed exclusively for all compressed air (micro) filters, regardless of their capacity or size. Sticking float type drains are no longer acceptable.
TEC-11
TEC-44 MOTORISED BALL VALVE Draining applications with a high level of contamination (rust, scale etc.) require the TEC-44. The TEC-44 is impossible to block due to its powerful ball valve rotation and large orifice.
TEC-44
CONDENSATE DRAINS
CONDENSATE DRAINS
CONDENSATE DRAINS
Specifications Smart Guard OPTIMUM PRO
EZ-1
16 bar*
Minimum pressure
0 bar
0 bar
0 bar
0 bar
0 bar
0 bar
Valve open (interval)
on demand
0.5-10 sec.
0.5-10 sec.
0.5-10 sec.
7 s/15 min
2 sec
Valve closed (pause)
on demand
0.5-45 min
0.5-45 min
0.5-45 min
4 min-24 hrs
1-120 min
Valve body brass
yes
yes*
yes
yes
yes nickel pl.
yes
Viton seals
yes
yes
yes
yes
yes
yes
Valve orifice
4mm
4.5mm
4mm
4mm
1/2" (12 mm)
2mm
In/out port 1/2”
yes
yes
yes
yes
yes
In/out port 3/8”
yes
yes
In/out port 1/4”
yes
yes
In/out port 1/8”
yes
Any voltage
40 bar
TEC-11
16 bar
IP65
21 bar
TEC-44
Maximum pressure
Enclosure
16 bar
COMBO
21 bar
yes yes
IP65
IP65
yes
IP65
IP65
yes
IP65 yes
Voltage 230VAC
yes
yes
yes
yes
yes
yes
Voltage 115VAC
yes
yes
yes
yes
yes
yes
50/60 HZ.
yes
yes
yes
yes
yes
yes
TEST switch
yes
yes
yes
yes
yes
yes
ABS (FR) housing
yes
yes
yes
yes
yes
yes
ON/OFF indicators
yes
yes
yes
yes
yes
yes
All coils applied in our condensate drains have H-grade insulation offering superior resistance to higher temperatures and longer life. * High pressure (up to 400 bar) and stainless steel models are available in the OPTIMUM range.
Service A large range of supporting products is available for all our products such as: Ball valve strainers in all sizes, service kits, replacement parts and mounting brackets. We ensure the fastest deliveries. Our products are typically supplied neutral, without any reference to our company name. Private labeling service with your logo (or your customer’s logo) is available; please consult us for further details. Call us today and request your full product ring binder and net pricelist. JORC’s Quality System has been certified in accordance with NEN-ISO 9000:2001 Information provided herewith is believed to be accurate and reliable. However, no responsibility is assumed for its use or for any infringement of patents or rights of others, which may result from its use. In addition, JORC reserves the right to revise information without notice and without incurring any obligation
JORC Industrial BV Vogelzankweg 168A NL-6374 AH Landgraaf The Netherlands
Tel Fax E-mail http://
+31 45 524 24 27 +31 45 524 19 79 info@jorc.nl www.jorc.nl