Penpower Jr. User Manual
Version: V7.2 Release: June, 2010 Edition: 1
Penpower Technology Ltd., Software User License Agreement You are licensed to legally use this software program (“the Software”) by Penpower Technology Ltd (“Penpower”) under this license agreement (“The Agreement”). If you do not agree with any of the provisions in this Agreement, please do not install, copy or use the Software. By using the Software, you are deemed to fully understand and accept the provisions of this Agreement. 1. Intellectual Property All intellectual property rights in the Software, together with all information and documents included in the packaging for the Software (including but not limited to copyrights), are property of Penpower, and are protected by relevant laws and regulations. 2. License to Use You are authorized to use the Software on one (1) single computer only. You may not use the Software on any other machines other than the said single computer. 3. Authority to Copy The Software and all documents included with the Software, and copyright thereof, are property of Penpower. You are licensed to make one (1) copy of the Software for your personal backup purposes. All other acts of copying are strictly prohibited. You may not sell, lease, dissemble, reverse engineer, copy, translate, adapt or derive the Software, or obtain the source code of the Software by any other means. You may not use the Software for any purposes other than those permitted under this Agreement. 4. Business Users If you need to install or use the Software on more than one (1) computer, please contact Penpower or our local distributor to purchase a license for the additional use. 5. Liability You agree to indemnify Penpower against all losses, costs, debts, settlement payments or other expenses (including but not limited to attorneys fees) arising from your breach of this Agreement, and you agree to compensate Penpower for all of the abovementioned damages. 6. No Warranty Effectiveness of a packaged software in handling information is closely related to
its software and hardware environment. The Software is published following careful development and product testing by Penpower, but Penpower is not able to conduct tests based on all possible combinations of software and hardware environment. Therefore, Penpower is unable to promise nor warrant that there will be absolutely no risk of loss or damage of information, or any other kind of loss, during installation and/or execution of the Software. You must be fully aware of your risks in using the Software. Penpower will provide you with the Software and support services in respect of the Software to the maximum extent permitted by law. However, Penpower does not warrant that the Software and information included in the package of the Software contain no defects or errors. Penpower is not liable for any indirect, special or incidental loss arising from the Software, including but not limited to loss of profits, damage to business reputation, cessation of work, hardware malfunction or damage, or any other commercial damage or loss arising from commercial use of the Software. 7. Limitation of Liability and Damages The maximum amount of compensation payable by Penpower, in respect of any damage incurred by you for any reason under this Agreement, is limited to the amount you have already paid to Penpower in respect of the Software. Under no circumstances will Penpower be held liable for the possibility of loss, notwithstanding Penpower may be aware of the possibility of such loss. 8. Prohibition Against Sublicense You are prohibited to assign the license in respect of the Software granted to you under this Agreement, or to grant a sublicense to another person. 9. Jurisdiction With regards to any disputes arising from this Agreement, Penpower and you agree that the court having jurisdiction over the business location of Penpower will be the court in the first instance. 10. Miscellaneous In the event that any provision of this Agreement is found to be invalid at law, such invalidity will not affect the validity of any other provisions, or the legal enforceability of such other provisions. In the event that the Software cannot be executed under conditions of normal use, due to any damage to the original disk/s, Penpower will replace the disk/s free of charge.
Contents Chapter 1 Product Overview................................................................. 1 - 1 1.1 Penpower Jr. Series Overview..................................................... 1 - 1 1.1.1 Penpower Jr. Crystal Touch.............................................. 1 - 1 1.1.2 Penpower Jr. Steel............................................................. 1 - 2 1.1.3 Penpower Jr. Diamond...................................................... 1 - 3 1.1.4 Penpower Jr. miniCard...................................................... 1 - 4 1.1.5 Penpower Jr. Carefree Pen................................................ 1 - 5 1.2 Introduction................................................................................. 1 - 6 Chapter 2 Installation............................................................................. 2 - 1 2.1 System Requirement.................................................................... 2 - 1 2.2 Handwriting Software Installation.............................................. 2 - 1 2.3 USB Human Interface Device Installation.................................. 2 - 6 2.4 Registration................................................................................. 2 - 6 Chapter 3 Hardware Operation............................................................ 3 - 1 3.1 Calibration................................................................................... 3 - 1 3.2 Touch-Pad Operation................................................................... 3 - 2 Chapter 4 New Handwriting/Mouse Mode........................................... 4 - 1 4.1 Run Penpower Jr. Handwriting System....................................... 4 - 1 4.2 Switching Modes......................................................................... 4 - 2 4.3 New Handwriting/Mouse Mode.................................................. 4 - 3 4.3.1 New Handwriting Mode Toolbar...................................... 4 - 3 4.3.2 Full Screen Handwriting Mode........................................ 4 - 5 4.3.3 How to Write..................................................................... 4 - 6
4.3.4 How to quickly fix errors, enter phrases and symbols...... 4 - 7 4.4 Balloon UI................................................................................... 4 - 8 4.4.1 Phrase Correction ............................................................ 4 - 9 4.4.2 Artificial Intelligence...................................................... 4-10 4.4.3 Split................................................................................. 4-12 4.4.4 Merge.............................................................................. 4-13 4.4.5 Homophone..................................................................... 4-14 4.4.6 Related word................................................................... 4-15 4.5 New Mouse Mode.................................................................... 4-16 4.5.1 Artificial Intelligence...................................................... 4-16 4.5.2 Learning String............................................................... 4-16 4.5.3 Update Phrase Database.................................................. 4-18 4.5.4 Signature......................................................................... 4-21 4.5.5 On-Line Translator.......................................................... 4-23 4.5.6 Input words by Related Phrase....................................... 4-25 4.6 Penpower Input Tool ................................................................ 4-26 4.7 Setting........................................................................................ 4-27 4.7.1 Recognition Setting........................................................ 4-27 4.7.2 General Setting............................................................... 4-29 4.7.3 Writing Setting................................................................ 4-30 4.7.4 Update Method Setting................................................... 4-31 4.8 Writing Application................................................................... 4-32 4.8.1 Switch Version................................................................ 4-32 4.8.2 Gesture............................................................................ 4-33 4.8.3 Mix Traditional and Simplified Writing......................... 4-33
4.8.4 Using Penpower Jr. in MSN Messenger......................... 4-34 Chapter 5 Traditional Mode.................................................................. 5 - 1 5.1 Run Penpower Jr. Handwriting System....................................... 5 - 1 5.2 Writing Mode.............................................................................. 5 - 1 5.3 Full Screen Handwriting............................................................. 5 - 2 5.3.1 Balloon UI........................................................................ 5 - 2 5.4 Writing-Pad................................................................................. 5 - 3 5.4.1 Write Input Tool................................................................ 5 - 3 5.4.2 Phonetic Input Tool........................................................... 5 - 4 5.4.3 Keyboard Input Tool......................................................... 5 - 4 5.4.4 Dictionary Input Tool........................................................ 5 - 5 5.4.5 Symbol Input Tool............................................................ 5 - 5 5.5 Phrase ......................................................................................... 5 - 6 5.5.1 Use Phurase to input words.............................................. 5 - 6 5.5.2 Update Phrase Database.................................................... 5 - 7 5.6 Other Functions........................................................................... 5 - 8 5.6.1 Learning Tool.................................................................... 5 - 8 5.6.2 Signature........................................................................... 5 - 8 5.6.3 On-Line Translator............................................................ 5 - 8 5.6.4 Setting............................................................................... 5 - 9 5.6.5 Switch Version................................................................ 5-10 5.6.6 Gesture............................................................................ 5-10 5.6.7 Mix Traditional and Simplified Writing......................... 5-10 5.6.8 Using Penpower Jr. in MSN Messenger......................... 5-10 Chapter 6 Assistant Tools....................................................................... 6 - 1
6.1 Penpower Voice Reader............................................................... 6 - 2 6.1.1 Use Penpower Voice Reader............................................. 6 - 2 6.1.2 Reading Setting................................................................. 6 - 3 6.2 Penpower Translator.................................................................... 6 - 4 6.2.1 English Words................................................................... 6 - 5 6.2.2 Chinese Characters........................................................... 6 - 6 6.2.3 English Chinese Article Translator................................... 6 - 7 6.2.4 Chinese English Article Translator................................... 6 - 8 6.3 Penpower Input Tool................................................................. 6-10 6.3.1 Phonetic Input Tool......................................................... 6-11 6.3.2 Keyboard Input Tool....................................................... 6-11 6.3.3 Dictionary Input Tool...................................................... 6-12 6.3.4 Symbol Input Tool.......................................................... 6-12 6.4 Penpower E-mail Touchpad...................................................... 6-13 6.4.1 Setting ............................................................................ 6-13 6.4.2 Accounts Management.................................................... 6-14 6.4.3 Email Address filter........................................................ 6-14 6.4.4 Connection...................................................................... 6-15 6.4.5 Check email manually.................................................... 6-15 6.4.6 Device Test...................................................................... 6-15 Chapter 7 Fast User Switching............................................................. 7 - 1 There may be newer versions of the software that was released during or after this product’s manufacturing date. If the content in the User Manual differs from the on-screen interface, please follow the instructions on the on-screen interface instead of the User Manual.
Chapter 1 Product Overview
Chapter 1 Product Overview Penpower Junior is available in five models: Penpower Jr. Crystal Touch, Penpower Jr. Steel, Penpower Jr. Diamond, Penpower Jr. miniCard and Carefree Pen. You may choose the model most appropriate to your personal requirements.
1.1 Penpower Jr. Series Overview 1.1.1 Penpower Jr. Crystal Touch Equipped with a message alert function it flashes and plays music to notify the user that there is an incoming message. The cute design makes it suitable for young MSN users. Active Pad Area: 2x1.5� Left mouse button Incoming Message Indicator Light Right mouse button
Handwriting/Mouse mode button
1-1
 Penpower Junior
1.1.2 Penpower Jr. Steel This innovative touch pad is not only light and compact but also combines a metallic pad with the texture of leather. Supports incoming message alerts so when an e-mail is received it flashes. Active Pad Area: 2x1.5�
Left mouse button Incoming Message Indicator Light Handwriting/Mouse mode button Right mouse button
1-2
Chapter 1 Product Overview
1.1.3 Penpower Jr. Diamond The eye-catching appearance makes this the new choice for the young and trendy. Available in diamond white and diamond black. Supports incoming message alerts so when an e-mail is received it plays music and flashes. Active Pad Area: 2x1.5�
Incoming Message Indicator Light
Left mouse button Handwriting/Mouse mode button Right mouse button
1-3
Penpower Junior
1.1.4 Penpower Jr. miniCard This mini touch pad is designed for use with notebooks. The size of a standard PC card (PCMCIA), it can be stored away in the notebook computer’s PCMICA slot when not in use. Active Pad Area: 1.7x1.3” Left mouse button
Handwriting/Mouse mode button Right mouse button
1-4
Chapter 1 Product Overview
1.1.5 Penpower Jr. Carefree Pen The user can change the picture card under the touch pad surface at any time. Active Pad Area: 3x2�
Left mouse button Handwriting/Mouse mode button Right mouse button
Mode Switching Button Shortcut Buttons Frequently Used Symbols
Mode Switching Button Under new handwriting/mouse mode clicking on this button switches between the handwriting and mouse mode; in traditional mode, clicking on this button switches between full-screen and writing pad handwriting modes. Shortcut Buttons From left to right, these are used for Insert Space, Delete Previous Character, New Line and Delete Next Character.
1-5
 Penpower Junior
1.2 Introduction Unicode recognition kernel Support unicode system to input Traditional and Simplified Chinese easily. All in one recognition kernel of Big5 and GB The character set can be recognized including more than 23000 Chinese words, 4818 HongKong words, alphabet,numeric, symbol, Hiragana, and Katakana. Artificial Intelligence recognition kernel After you correct the recognition result from candidate or AI dialog, the system will modify its recognition database to adapt your personal writing style. This would improve the recognition rate for yourself. Full screen multi-words free writing It is allowed to handwrite multiple words before recognition at one time based on the advanced character segmentation technology. Free writing recognition kernel Not only the stroke order is free, but even though the careless or illegible continuous free writing could be recognized correctly. Smart Handwriting/Mouse Mode: This brand new Penpower mouse is more intuitive and easier to use. Additional symbols and symbol shortcuts are also provided for your convenience.
1-6
Chapter 1 Product Overview
Other auxiliary function provide many usefully functions, such as related phrase, related word, special symbol table, homophone,dictionary, learning string, color inking and sound effect...etc, to make input easier. Word Learning Wizard All new word learning wizard mode making it easy to set up and manage learning dictionary. Chinese-English Translation: Online dictionary with real-time translation between Chinese and English with 139,000 English to Chinese and 76,000 Chinese to English entries. Penpower VoiceReader Integrate the Text-to-Speech technology to read aloud the Chinese article content within any window. Transparent signature Directly super-impose your signature at the desired area in a Word or Excel document without disrupting the document layout. Or insert your signature into Outlook, Netscape and Eudora e-mails and send it to other people. Balloon UI The visual user interface is hidden transparently. The function tool bar will be popped up on the word where the cursor is. Mail Alert Auto receive eamil from internet and announce the user by blink or music. (Only supported by Crystal Touch and Steel )
1-7
 Penpower Junior
Mail account management Support account filter and multi-account management. (Only supported by Crystal Touch and Steel ) Inking on MSN Messenger If you have MSN Messenger 6.1 or above installed, you will be able to transmit handwriting and hand-drawn graphics through MSN Messenger for that extra personal touch. Fast User Switching Windows fast user switching supported so every user can have access to their personal settings.
1-8
Chapter 2 Installation
Chapter 2 Installation 2.1 System Requirement 1. Intel Pentium processor or compatible 2. 128MB RAM 3. 150MB disk space 4. Windows 7/Vista/XP OS 5. USB Port
2.2 Handwriting Software Installation 1. Please insert CD-ROM disc into the CD-ROM drive and the system will automatically launch setup.exe. Select the “Install Penpower Jr.� option.
2-1
Penpower Junior 2. Please select your Penpower Jr. model then click the “Confirm” button.
3. Please select the language version you wish to install then click “Confirm”. Please close all Penpower applications to ensure that the install/ repair process will run properly. Follow the instructions on screen and carry out the installation process as directed.
2-2
Chapter 2 Installation
4. Select the installation folder and type. Typical installation is recommended. Besides, Penpower Jr. offers two handwriting modes: Traditional and New Handwriting/Mouse. We recommend that you choose to install the New Handwriting/Mouse mode. If you are an existing Penpower Junior user and prefer to use the Traditional mode then you may choose to install the Traditional mode instead. The two modes only differ in their interface but have the same set of functions.
Note: If you choose custom installation type, you can check every single function to install, except the functions in grey color.
2-3
 Penpower Junior 5. Click Next to use the default folder name. Check HongKong Character Support if you desire to recognize Hong Kong characters.
6. You can select the language of handwriting recognition kernel. Enable to auto-load the handwriting software when the windows starts.
2-4
Chapter 2 Installation
7. Click Automatically load Penpower Jr. if you wish to automactically run Penpower Jr. when the computer starts. Click “Finish� to complete the installation.
8. Penpower Jr. offers various Chinese fonts. You can install DYNA Fonts from the main installation menu. Select the fonts you desire to install, then follow the instruction to install.
2-5
 Penpower Junior
2.3 USB Human Interface Device Installation Connect the touch-pad with USB port on computer.
2.4 Registration System will ask you to register for warranty at your first run. Please press Register now to start registration or click Register later to skip this procedure. You can register later on from [About]/[Register]. If you want to choose Register later and do not need to be reminded again, you can check Don’t show this page at startup.
2-6
Chapter 3 Hardware Operation
Chapter 3 Hardware Operation 3.1 Calibration After finishing installation, you should be able to hand write right away. If you found that the inking you wrote is not centered on screen, you need to calibrate your touch-pad to remap the active area. 1. Click Penpower Jr. icon tion from the menu.
from the top-left corner and select calibra-
2. Please click on the upper-left corner spot and the lower-right corner spot of touch pad with the pen. Tip : After calibration, the new configuration would take effect immediately. You do not need reboot or reload Penpower Jr. handwriting system. Note: When calibrating the Penpower miniCard please orient the touch pad so it’s in landscape mode.
3-1
 Penpower Junior
3.2 Touch-Pad Operation 1. Moving: Put the pen on the touch-pad, and then move it on the panel gently. 2. Click: Hit the touch-pad once. 3. Dragging: Hit the touch-pad twice quickly, and move the pen on the panel while second pen down. 4. Double click: it the touch-pad twice quickly. 5. There are three buttons on the touch-pad as normal mouse functionality, but the middle button is defined to toggle pen mode and mouse mode. The left button would be revised for error correction on pen mode state. While you press the left button once each time, the latest recognized result would be replaced with the next candidate word. It lets you correct the result quickly without switching to mouse mode. Tip : The three buttons are not on a line for some touch-pad. The alone one is the middle button. Tip : You can click the mode button on the window to switch mouse mode and pen mode.
3-2
Chapter 4 New Handwriting/Mouse Mode
Chapter 4 New Handwriting/Mouse Mode 4.1 Run Penpower Jr. Handwriting System If you installed “New Handwriting/Mouse Mode“ and run “Start/All Programs/PenpowerJr/Penpower Jr.”, you will see the New Handwriting window as following:
4-1
Penpower Junior
4.2 Switching Modes Penpower Jr. has the Handwriting and Mouse modes. The Handwriting mode provides writing and recognition functions. You can select the candidates, related words, phrases and symbols via mouse. In Mouse mode, you can use the writing pad and pen as the mouse to select the candidates, related words, phrases and symbols. It also provides handwriting inking review, and some function buttons such as AI, learning tool, phrase, signature and on-line translator. When Penpower Junior is launched for the first time it will start in the handwriting mode. Left mouse click on the “Menu” button or right mouse click on the toolbar to open the options menu. Select “Penpower mouse mode” to switch to the mouse mode. In mouse mode, click on the “Switch” button handwriting mode.
to switch back to the
Tip: The middle function button on the Penpower Junior touch pad allows fast switching between the handwriting and mouse modes.
Handwriting mode
Mouse mode
4-2
Chapter 4 New Handwriting/Mouse Mode
4.3 New Handwriting/Mouse Mode Penpower Jr. has the Handwriting and Mouse modes. The following will explain the new Handwriting mode and the Balloon UI.
4.3.1 New Handwriting Mode Toolbar When run Penpower Jr., the vertical new handwriting mode toolbar will appear. You can write words on the handwriting pad to input words. Right click the mouse on the or click menu to open the menu. Double click to close the Handwriting toolbar temporarily. Click “Handwriting mode” to open the Handwriting toolbar.
The new handwriting mode provides vertical and horizontal layout of the toolbar. Click ‘menu’ button to select the layout of the toolbar.
Horizontal Swicth
4-3
Penpower Junior The candidate area of the Handwriting mode provides you to promptly correct the recognized words, for example when you wrote ‘蒙’, and it recognized to ‘豪’, you can select ‘蒙’from the candidate area via the mouse. Click the symbols table button via the mouse to open the symbols table and enter the corresponding punctuation symbol. menu button
the candidate words
symbols table button menu button
4-4
Chapter 4 New Handwriting/Mouse Mode
4.3.2 Full Screen Handwriting Mode There are three different options of full screen mode in the main menu. Single-word writing It is allowed to handwrite one word only at one time.You can not handwrite the next word until the recognition result of current word has been finished. Two-sides writing After the first stroke is written, one vertical line would be displayed on the center of screen. All the strokes written on the same side would be considered as part of one word. When a new stroke is crossed to the other side, it means that the last word is finished and the next word start to write. Free writing You can handwrite multiple characters before recognition at one time. Forty one characters at most is allowed. It permits left-to-right,or top-tobottom free writing order. Remember to keep adequate distance between two contiguous words when you write. It affects the result of character segmentation.
4-5
Penpower Junior
4.3.3 How to Write On Free writing mode, it’s better to keep strokes of the same word closed, and keep not to overlap between words when you write. You need to finish writing every strokes of one word. Right example Write three words of 『明日 月』. Wrong example 1 Overlap between two words. All the strokes may be recognized as one word. Wrong example 2 The two parts of one word are written far away from each other. All the strokes may be segmented into two words. Auto Phrase Correction The system automatically proofreads on your writing content to improve the recognition rate. For example, when you continuously write『天 下太平』 (peace on the earth) four characters, but the character『天』 is incorrectly written as『夫』, so they become『夫下太平』. Penpower uses its internal phrase dictionary to correctly recognize your intended result『天下太平』.
4-6
Chapter 4 New Handwriting/Mouse Mode
4.3.4 How to quickly fix errors, enter phrases and symbols When writing, candidate words based on the previous input will be displayed on the handwriting toolbar. Each press of the left function button on the touch pad will move the candidate words forward by one and also correct the results, allowing errors to be quickly fixed; the right function button allows the input of six habitual symbols. Alternatively, select a candidate word on the handwriting toolbar to correct it. Press the symbols table button with the mouse to open the symbols table and enter the corresponding punctuation symbol. You can also press the middle function button on the touch pad to switch to the mouse mode. In mouse mode, select the candidate word for the candidate words, post-related word, phrase or select symbol input. For example: In handwriting mode, the input『蒙恬科技』had the character『技』misread as『投』. Here you can press the middle function button on the touch pad to switch to the mouse mode then choose from the candidate words field『技』to correct the mistake. Once fixed, press the middle function button to switch back to the handwriting mode and continue writing. Function Button Phrase
Handwriting Inking
Candidate words
Symbol
Post-related word Symble Key
4-7
 Penpower Junior
4.4 Balloon UI This unique user interface let you edit recognition result freely in any application. The visual user interface is hidden transparently. When you want to correct some word, just move the cursor position on this word for a while. The function tool bar will be popped up there where the cursor is. Tip : You do not need to press any button after the cursor is moved on the word. In the function tool bar, click candidate words, AI button , homophone , pre-related word , post-related word or phrase correction to correct the result. click button to see the raw inking. Click button to see the tutor. Click button to input punctuation symbol. Click button to split one word. Click button to merge the word with next word. The button is for the Chinese-English translation function. Details are provided further on. Note: In New Handwriting/Mouse mode the balloon interface functions can only be operated with the computer mouse. Note: Balloon Interface can be used in Office, IE, WordPad, but on 64 bit systerm, it can not be used in some software, ext. note.
4-8
Chapter 4 New Handwriting/Mouse Mode
4.4.1 Phrase Correction In Full Screen mode if you wish to enter a common phrase such as an idiom, if you aren’t sure of how to write one of the characters you can substitute a similar sounding character instead. If you are not sure of the character’s pronunciation either, choose any at random. When you have finished writing the phrase, select the uncertain character with the mouse then click on the phrase correction button. The system will examine the four characters before or after this particular character to guess what you meant and make the change. 1. When entering an idiom in Full Screen mode such as『拔苗助長』, if you are not sure of how to write the character『拔』, you can enter the character『一』instead to input 『一苗助長』. 2. Move the mouse over the character 『一』and pause for a moment to bring up the “Candidate Characters Window”. Click the phrase correction button and the『一』character will be changed to『拔』.
4-9
Penpower Junior 3. If the phrase correction function came up with multiple candidate words, these will be shown in the candidate words window for you to choose from. For example, if the input was『股份一限公司』when you pause the mouse cursor over the 『一』character, this will bring up the “Candidate Characters Window”. Pressing the phrase correction button will bring up a list of all phrase correction candidate words for you to choose and make the correction with.
4.4.2 Artificial Intelligence When you use candidate word or AI button to correct result, the system will modify its recognition database to adapt your personal writing style. The may improve the recognition rate. 1. Handwrite some words. The result would be sent in the caret. 2. e.g.『恬』is wrongly recognized as 『恰』. 3. Move the cursor on the word『恰』 for a while to pop up the function tool bar. 4. Click the candidate word if the correct word is there.
4-10
Chapter 4 New Handwriting/Mouse Mode
5. Otherwise click the AI button open the AI correction dialog.
to
6. Input the correct word『恬』, and then click “OK”. 7. You will see the wrong result『恰』 is already updated as『恬』. Your personal writing style of inking has also been learned.
Tip: You can also press the touch pad’s middle button to switch to the mouse mode. If the correct word appears among the candidate words, simply click on it to make the change. If the correct word is not among the candidate words, press the “Penpower AI” button to open the AI dialogue field to train the software.
4-11
Penpower Junior
4.4.3 Split When two words are written too close, they may be recognized as single word. You can use split function to separate it into two words. 1. Handwrite four words『日月星辰』 by free writing. The result would be sent in the caret. 2. If『日』and『月』is written too close, you may wrongly get three words of result『明星辰』. 3. Move the cursor on the word 『明』 for a while to pop up the function tool bar. 4. Click button to separate 『明』 into『日』and『月』.
4-12
Chapter 4 New Handwriting/Mouse Mode
4.4.4 Merge When some strokes of one word are written far away from each other, they may be recognized as several words. You can use merge function to combined them into one word. 1. Handwrite two words『棟樑』by free writing. The result would be sent in the caret. 2. If『木』and『東』is written far away from each other, you may wrongly get three words of result 『木東樑』. 3. Move the cursor on the first word 『木』for a while to pop up the function tool bar. 4. Click button to merge『木』and 『東』into『棟』.
Note : Only two continuous words could be merged at one time.
4-13
Penpower Junior
4.4.5 Homophone If you forget how to write some words, or they are too complicated to write, you can write down some other easy homophone to get the word that you would like to input. e.g. If you want to input the word『豫』: 1. Write any one homophone of『豫』, e.g.『玉』. The result would be sent in the caret. 2. Move the cursor on the first word 『玉』for a while to pop up the function tool bar. 3. Click
button to open the window
of homophone words.
4. You can Click / / button to toggle other Zhu yin homophone/ Cantonese homophone/Hanyu homophone. 5. Click『豫』to replace『玉』.
4-14
Chapter 4 New Handwriting/Mouse Mode
4.4.6 Related word For any two contiguous words, the first one is the pre-related word of the second one. The second one is the post-related word of the first one. e.g.『科技』, 『科』is the pre-related word of『技』, and『技』is the post-related word of『科』. 1. Handwrite some words. The result would be sent in the caret e.g.『恬』 is wrongly recognized as『恰』, and『科』is wrongly recognized as 『料』. 2. Move the cursor on the word『恰』 for a while to pop up the function tool bar. 3. Click button to open the window of pre-related phrases. If the correct phrase 『蒙恬』is in the list, click it to update the result. 4. Move the cursor on the word『料』 for a while to pop up the function tool bar. 5. Click button to open the window of post-related phrases. If the correct phrase『科技』is in the list, click it to update the result. 6. You will see the wrong result『蒙恰 料技』is already updated as 『蒙恬 科技』at last.
4-15
Penpower Junior
4.5 New Mouse Mode The following will introduce the function buttons of Mouse mode, such as Artificial Intelligence, learning tool, phrase, signature, on-line translator and settings.
4.5.1 Artificial Intelligence When writing a word in the New Handwriting mode, you can push the middle button for switching to the Mouse mode. You can click [Artificial Intelligence function] to adapt your personal writing style. Please refer to 4.4.2 for details.
4.5.2 Learning String A string is represented by an inking of symbol. So, you can handwrite the symbol anytime and the recognition engine will recognize it as the expanded string. It prevents you from redundant writing. 1. In Mouse mode, press the “Learning Tool” button to open the Learning Too Window. Select “Learn String” to open the “Learning Tool” screen.
4-16
Chapter 4 New Handwriting/Mouse Mode
2. Input the string you want to learn, then click on “Start�.
3. Draw a symbol twice to finish the learning.
Note: If the symbols you draw have too big differences, the learning will be failed. Please redraw the symbol.
4-17
Penpower Junior 4. Click “Manage DB” tag, You can browse the dynamical inking or modify the string you have ever learned here.
4.5.3 Update Phrase Database There are thousands upon thousands default phrases that you can use in the Penpower handwriting recognition. It also allows you to customize the phrase database to meet your needs. 1. In Mouse mode press the “Phrase” button . Or in Handwriting mode select “Edit Phrase” from the Associations Dictionary and open the “phrase” dialogue.
4-18
Chapter 4 New Handwriting/Mouse Mode
2. Click “insert” to open the “Phrase Input” dialog. You can input a new phrase here. e.g. If you want to insert『一不做二不休』as a phrase, input『一不做二不休』.
You need to update the phonetics on the right side. Click / button to hear their pronunciation and check if the one you choose is right. Note : The maximum length of one phrase is 200 word. In fact, the phonetics is only for VoiceReader to read text with right sound of phonetics. If you do not care, you can skip it. Click “OK” to finish insertion. Afterward, if you write『一』, then『一 不做二不休』would be displayed in the related phrase window. Just click it to input.
4-19
Penpower Junior 3. Selet on phrase from the list, and then click “Modify” to update the phonetics of this phrase. Click “Delete” to delete this phrase from database. 4. In “Search string” field, you can only input part of a phrase to find this phrase quickly. 5. You can use “New”, “Open”, “Save”, “Save As” function to manage your phrase database (*.yib). Note: Although you can create several phrase database, you can only choose one at one time. 6. Import file Click “Import” and select one phrase database(*.yib) or text file to import it into current database. The text file format must follow this rule - one phrase in each line. You can edit it by any editor, e.g. NotePad. Note: Every imported phrase would own phonetecs by default. Their phonetics may be wrong. You can modify them from phrase dialog.
4-20
Chapter 4 New Handwriting/Mouse Mode
4.5.4 Signature 1. Move the caret to where the signature will be. 2. Open the Mouse mode and press the “Signature” button. The “Welcome to Penpower Signature Tool” screen will be shown and you are now in the signature mode.
3. In signature mode, the right button is defined to toggle pen mode and mouse mode. You must switch to pen mode before start to sign your signature. The left button is defined to change color. : Change the color of inking. : Change the thickness of inking. : There three kind of pen style to change. : Clear all. : Undo one stroke. : redo one stroke. 4. Click
button to cancel signature.
5. Click
button to insert your signature in the caret.
4-21
 Penpower Junior
6. Click button to overlap your transparent signature with MS Word or MS Excel document. Note: You can use the transparent signature in the latest MS Word and Excel, but MS Office 2007 not support this function. You may make notes and commentary by using transparent signature function.
4-22
Chapter 4 New Handwriting/Mouse Mode
4.5.5 On-Line Translator 1. Open the Mouse mode and press the “On-Line Translator� button to open the On-Line Translator function. Press the button again to close the function.
When reading English or Chinese articles, if you encounter unknown characters or phrases, move the cursor over the characters, and a translation window pops up to explain them for you.
When you move the cursor outside the interactive scope, the window will disappear. In the window, you can press the play button or character / or phrase explanation buttons.
4-23
 Penpower Junior
The online translation is used in the balloon interface. When you want to look up a character’s translation, select button from the candidate window.
4-24
Chapter 4 New Handwriting/Mouse Mode
4.5.6 Input words by Related Phrase Phrase function provides the related phrases for inputting phrases quickly. 1. Write down the first word of one phrase. e.g. If you want to input the phrase『一年四季』, just write the first word『一』. 2. Press the middle button on the touch pad to swicth to the Mouse mode. All the phrases beginning with this word『一』will be listed on the phrase area of the Mouse mode. 3. Click the phrase or memorized word that you want to send it into the caret. e.g.『一年四季』.
4-25
Penpower Junior
4.6 Penpower Input Tool Penpower Junior provides four types of input tools: Phonetic, Keyboard, Dictionary and Symbol. Left click on the “Menu” button or right click on the toolbar to open the options menu. Select [ Open Penpower Input Tool ] to open [ Penpower Input Tool ].
Title bar
Candidate
Please see Chapter 6.3 for more details.
4-26
Chapter 4 New Handwriting/Mouse Mode
4.7 Setting In Mouse mode click on the “Setting” button or in Handwriting mode choose the “Setting…” from the menu to open the settings page. You can configure the recognition engine, output format or writing inkings here.
4.7.1 Recognition Setting Mode The recognition mode of Chinese, English, Numeral, Symbol and Japanese could be turned on/off individually. You could turn on several modes at the same time. Recognition 1. Simplified character:All the results are simplified words. If you do not know how to write traditional words, you can turn off “Traditional to Simplified” option to disable the traditional writing. Note: “Traditional to Simplified” option is available only when you switch to the simplified version.
4-27
Penpower Junior 2. Traditional character:All the results are traditional words. 3. Traditional+Simplified:You will get traditional words while using traditional writing, and get simplified words while using simplified writing. Unusual character The system will recognize some unusual words only when you turn on “Unusual character” option. Running Hand Check this option to have the software recognize run-on cursive. Hongkong Character This recognition mode is only available when the Penpower Jr. is set to the Traditional Chinese or Traditional Chinese (Hongkong) version. You can connect to http://www.microsoft.com/hk/hkscs/default.aspx to check the Hongkong characters list.
4-28
Chapter 4 New Handwriting/Mouse Mode
4.7.2 General Setting Half shape/Full shape To decide whether the handwriting result of alphanumeric is recognized as one-byte code or doublebytes code. Auto load Auto execute Penpower Jr. handwriting system when windows start-up. Touch Pad Direction If you are using Penpower Junior miniCard, you can use this feature to set the orientation of the touch pad as Horizontal or Vertical. By default the touch pad is set to Horizontal (Right-Hand) but you can use this setting to change it to portrait. Sound Pronounce the character in Mandarin or Cantonese immediately after recognition.
4-29
Penpower Junior
4.7.3 Writing Setting Ink color Change the color of inking. You can adjust the smoothness of color degree for “Multiple” option. Ink width Change the thickness of inking. Ink sound Change the sound effect while writing. Pen style There three kind of pen style to choose. Speed There are several levels of writing speed you can set. After you stop writing, the less the relative value is, the shorter the timeout waiting for recognition is.
4-30
Chapter 4 New Handwriting/Mouse Mode
4.7.4 Update Method Setting Auto Update You are recommended to set the update method as Auto Update to let the system automatically check for and download updates. You can dertermine the check interval as daily, weekly, biweekly, or monthly.
Manual Update You can also set the update method as Manul Update. Please Go to the main menu and select [Check for updates] and the system will then check for updates for you. If your version is the newest, the message box will display as below.
4-31
Penpower Junior
4.8 Writing Application The following will introduce the function of Writing Application, such as Switch Version, Gesture, Mix Traditional and Simplified Writing, and Using Penpower Jr. in MSN Messenger.
4.8.1 Switch Version 1. In Mouse mode, open the Penpower Jr. options then select “Version…”.
2. Under the Windows System for Traditional Chinese, Traditional Chinese (Hong Kong) or Simplified Chinese the output of the handwriting recognition will always be encoded using Unicode. After switching version, if you can not see the message displayed correctly on the bottom, it means that your Windows system may not support this version you chose. 3. Check “Use English Message” option to display all the messages of Penpower Jr. handwriting system in English.
4-32
Chapter 4 New Handwriting/Mouse Mode
4.8.2 Gesture Penpower Jr. handwriting system support four standard inking gesture. You can handwriting these gestures to simulate keyboard input. 1. Delete : simulate DELETE key. 2. Backspace : simulate BACKSPACE key. 3. Enter : simulate ENTER key.
or
4. Space : simulate SPACE key.
4.8.3 Mix Traditional and Simplified Writing You can mix writing traditional and simplified Chinese words. e.g. Handwrite two words『書寫』.
Whatever you wrote, choose different recognition engine to decide the results being traditional or simplified words. Please see 4.6.1 for more details
4-33
Penpower Junior
4.8.4 Using Penpower Jr. in MSN Messenger Note: You have to install MSN Messenger version 6.1 or higher. After you have signed in to the MSN Messenger, double click on the person’s name to begin the conversation box. Below this conversation box, there are two modes for you to select, including “Handwrite” and “Type” . You can switch between the input modes as you like. Note: If you can’t activate the handwriting mode, please visit the Microsoft website and install the necessary handwriting components.
In the Handwrite mode, you can select the font size and font color from the scroll bar menu provided. After the setting has been done, you can write on the tablet and the words will appear as what you have previously set. If you want to clear the words you have written, you can select and use the eraser shown in the scroll bar. After you have input your message, you can click on “send” to send your handwritten message.
4-34
Chapter 4 New Handwriting/Mouse Mode
Set ink width
Set ink color
4-35
Set the rubber
Penpower Junior
4-36
Chapter 5 Traditional Mode
Chapter 5 Traditional Mode 5.1 Run Penpower Jr. Handwriting System If you installed “Traditional Mode“ and run “Start/All Programs/PenpowerJr/Penpower Jr.”, you will see the Traditional Handwriting window.
5.2 Writing Mode There are two kind of writing modes. One is “Full-Screen” mode, the other one is “Writing-Pad” mode. You can click the button to toggle these two writing mode.
5-1
 Penpower Junior
5.3 Full Screen Handwriting There are three different options of full screen mode in the main menu, Single-word writing, Two-sides writing and Free writing. Please see Chapter 4.3.3 for more details.
5.3.1 Balloon UI This unique user interface let you edit recognition result freely in any application. The visual user interface is hidden transparently. When you want to correct some word, just move the cursor position on this word for a while. The function tool bar will be popped up there where the cursor is. Please refer to Chapter 4.4 for more details.
5-2
Chapter 5 Traditional Mode
5.4 Writing-Pad There are five input tools in Writing-Pad: Write, Phonetic, Keyboard, Dictionary and Symbol.
5.4.1 Write Input Tool Title bar
Writing Area
Related Phrase
Candidate Symbol
You need to click the middle button or click on the writing area switching into pen mode before you start writing. The color of writing area will change from gray into yellow. The left button would be revised for error correction on pen mode. While you press the left button once each time, the latest recognized result would be replaced with the next candidate word. It lets you correct the result quickly without switching to mouse mode. Click the middle button or click on the writing area again to switch into mouse mode. The color of writing area will change from yellow into gray. Tip: The writing-pad adopts shrink-expand user interface. It would expand into normal size when the cursor move on it. Otherwise it will shrink as an small icon to avoid occupying the screen.
5-3
Penpower Junior
5.4.2 Phonetic Input Tool There are three types of phonetic input tool, Zhu yin, Cantonese and Hanyu by default. You can create your own phonetic input tool. How to Use 1. Select one phonetic input tool of Zhu yin, Cantonese and Hanyu or others. 2. Click the phonetic button one by one in order. 3. The converted candidate character would be listed in the text buffer.
5.4.3 Keyboard Input Tool Keyboard Simulated software keyboard. Inner Code For example, the inner code of [☆] in hexidecimal is A1EE. Click [A], [1], [E], [E] button one by one in order,and then get [☆].
5-4
Chapter 5 Traditional Mode
5.4.4 Dictionary Input Tool Query by stroke For example, when you want to input the character 『明』, you can 1. Coose the stroke of the radical: 4. 2. Select the radical 『日』from the candidates. 3. Choose the total strokes of 『明』: 8.
4. Select your target character:『明』.
Query by radical For example, when you want to input the character 『明』, you can 1. Choose the total strokes of 『明』: 8. 2. Select your target character: 『明』.
5.4.5 Symbol Input Tool The special symbols are grouped into multiple pages of table. Select the suitable table and click the symbol what you want to get. It allows you to customize the symbol tables.
5-5
Penpower Junior
5.5 Phrase 5.5.1 Use Phurase to input words 1. In both the Full Screen and Writing-Pad modes the Associations dictionary window will always be displayed. Note: In Full Screen Handwriting mode, if the Associations dictionary is closed, select “Open Related Phrase” from the menu to reopen it.
2. Write down the first word of one phrase. e.g. If you want to input the phrase『一方面』, just write the first word『一』. 3. All the phrases beginning with this word『一』will be listed on the top. 4. All the memorized words you have ever written right following this word 『一』will be listed on the bottom. 5. Click the phrase or memorized word that you want to send it into the caret. e.g.『一方面』.
5-6
Chapter 5 Traditional Mode
5.5.2 Update Phrase Database There are thousands upon thousands default phrases that you can use in the Penpower handwriting recognition. It also allows you to customize the phrase database to meet your needs. 1. Open the Penpower Jr. main menu and select “Open Related Phrase”. Then select “Edit Phrase” from the Phrase menu to open the “Edit Phrase” diolague to edit the dictionary.
2. Click “Insert” to open the phrase input dialog. You can input a new phrase here. Please see Chapter 4.5.3 for more details.
5-7
Penpower Junior
5.6 Other Functions 5.6.1 Learning Tool Select the “Learning Tool” from the main menu to open the Learning Tool diolague. Please see Chapter 4.5.2 for more details.
5.6.2 Signature Move the caret to where the signature will be. Then select “Signature” from the main menu to open the “Welcom to Penpower Signature Tool” screen, and enter in signature mode. Please refer to Chapter 4.4.4 for more details.
5.6.3 On-Line Translator Select “On-Line Translat” from the main menu to open the On-Line Translat function. Select again to close the function. Please refer to Chapter 4.5.5 for more details.
5-8
Chapter 5 Traditional Mode
5.6.4 Setting In Penpower Junior’s options menu select “Settings” to open the settings page. You can configure the recognition engine, output format or writing tracks here. For more details on PenPower settings please refer to the explanation provided in Chapter 4.7. The only difference is that in Traditional mode the writing pad display can be configured here. Please switch to the “General” setting page and in the “Display” area you can choose whether to display the window title and the buffer area. Title bar Show/hide the caption of writing-pad. Buffer Show/hide the text buffer of Writing-pad. If the buffer is displayed, all the recognition result would be put here. After the buffer is full, the first word would be popped out into the caret. You can also click button to force all the result popped out and clear the buffer anytime. If the buffer is hidden, the recognition result will be send to the caret directly. Title bar Buffer
5-9
Penpower Junior
5.6.5 Switch Version Open the main menu. Select “Version...”. There are three Versions for Choose. Please see Chapter 4.8.1 for more details.
5.6.6 Gesture Penpower Jr. handwriting system support four standard inking gesture. You can handwriting these gestures to simulate keyboard input. Please see Chapter 4.8.2 for more details.
5.6.7 Mix Traditional and Simplified Writing You can mix writing traditional and simplified Chinese words. Whatever you wrote, choose different recognition engine to decide the results being traditional or simplified words. Please see Chapter 4.8.3 for more details.
5.6.8 Using Penpower Jr. in MSN Messenger If you have to install MSN Messenger version 6.1 or higher and Penpower Jr., you can use Penpower Jr. touch pad to input or draw in MSN. Please refer to Chapter 4.8.4 for more details.
5-10
Chapter 6 Assistant Tools
Chapter 6 Assistant Tools If you selected the‘Typical’ or ‘Custom’type during the installation, you will find Penpower VoiceReader, Penpower Translator and Penpower Chinese Convert Tool. In the Custom type, you could select the functions to install.
6-1
Penpower Junior
6.1 Penpower Voice Reader Integrate the Text to Speech (TTS) technology to read aloud the Chinese article content within any window.
6.1.1 Use Penpower Voice Reader 1. Run “Start/All Programs/Penpower Jr/Penpower VoiceReader”. Note: Before run Penpower VoiceReader, please launch Penpower Jr. first or the system will prompt you to do so. 2. After Voice Reader is executed, the small icon would be displayed on the right top corner of any application. 3. If you select one paragraph of text first, then click , and select “Start/Stop Text To Speech”. The selected text will be read aloud. You can choose Mandarin or Cantonese tone pronunciation from the menu. 4. If you click without selection, then select “Start/Stop Text To Speech”. The text would be read aloud from caret location. Note: The Windows Vista 64bit edition does not support the direct textto-speech function. You must select a section of text before you can use the text-to-speech function. 5.You can click reading.
, and select “Start/Stop Text To Speech” again to stop
6-2
Chapter 6 Assistant Tools
6.Click
, select “Exit” to exit the Penpower Voice Reader.
6.1.2 Reading Setting 1. Click , select “Setting” to open the setting dialog. Speech Speed : Adjust the speed of reading. Speech Pitch : Adjust the tone of reading. Speech Volume : Adjust the volume of reading.
6-3
Penpower Junior
6.2 Penpower Translator This is a word translator of Chinese to English or English to Chinese, and sentence translator of English to Chinese. Run “Start/All Programs/Penpower Jr/Penpower Translator”. Note: Before run Penpower Translator, please launch Penpower Junior first or the system will prompt you to do so.
6-4
Chapter 6 Assistant Tools
6.2.1 English Words 1. Click the button “En. Ch.� on the left. 2. In the input frame on the upper left corner, enter an English word, hit Enter to see all the Chinese explanation. 3. Choose different tabs to look up English word Define, Variation, Idiom and Analysis.
6-5
Penpower Junior
6.2.2 Chinese Characters 1. Click the button “S.Ch. En.” on the left. 2. In the input frame on the upper left corner, input a Chinese character or phrase, and then hit Enter to see the English explanation. Tip: If the Chinese word you wish to look up is Traditional Chinese, please select the “ C. Ch. En.” translation option.
6-6
Chapter 6 Assistant Tools
6.2.3 English Chinese Article Translator 1. Click the button “Sentence En. Ch.” translation on the left. 2. In the top input frame, input an English article, click the button to start translation. The translation result is shown in the lower input frame. Tip: When you translate a whole article, make sure there’s a period mark at the end of each sentence. It will increase the accuracy of translation.
6-7
Penpower Junior
6.2.4 Chinese English Article Translator 1. Click the button “Sentence S. Ch.En.” translation on the left. 2. In the top input frame, input an Chinese article, click the button to start translation. The translation result is shown in the lower input frame. Tip: If the Chinese sentence you wish to look up is Traditional Chinese, please select the “ Sentence C. Ch. En.” translation option.
Press the Speech button. If looking up a single character or word, the system will provide its Chinese or English pronunciation. If translating the entire text, it will read all of the content in the current input window. The other buttons on the translator interface have the following functions: /
: Previous/Next: look up the definitions for nearby words.
: Cut: cut the selected content. (Only available when translating an entire sentence) : Copy: copy the selected content.
6-8
Chapter 6 Assistant Tools
: Paste: paste the cut or copied content. (Only available when translating an entire sentence) : Delete: delete all input and translation content. (Only available when translating an entire sentence) : Save: press this button to open the “Save as…” dialogue window. This will save all of the input and translated content into a new *.txt format file. (Only available when translating an entire sentence.) When looking up a single word you do not need to enter the entire text string. If the word you wish to look up shows up in the list, use the direction keys to select that word as the input then press Enter to look up that word.
6-9
Penpower Junior
6.3 Penpower Input Tool There are four types of input tools: Phonetic, Keyboard, Dictionary and Symbol. The new Handwriting mode provides Penpower Input Tool. Left mouse click on the “Menu” button or rightmouse click on the toolbar to open the options menu. Select [ Open Penpower Input Tool ] to open [ Penpower Input Tool ]. In the Traditional mode, this function includes in the Writing-Pad. Note: You need to run the Penpower Jr. before run the Penpower Input Tool.
Tip: The writing-pad adopts shrink-expand user interface. It would expand into normal size when the cursor move on it. Otherwise it will shrink as an small icon to avoid occupying the screen.
6-10
Chapter 6 Assistant Tools
6.3.1 Phonetic Input Tool There are three types of phonetic input tool, Zhu yin, Cantonese and Han pin by default. You can create your own phonetic input tool. How to Use 1. Select one phonetic input tool of Zhu yin, Cantonese, Han pin or others. 2. Click the phonetic button one by one in order. 3. The converted candidate character would be listed in the text buffer.
6.3.2 Keyboard Input Tool Keyboard Simulated software keyboard. Inner Code For example, the inner code of [☆] in hexidecimal is A1EE.Click [A], [1], [E], [E] button one by one in order,and then get [☆]
6-11
Penpower Junior
6.3.3 Dictionary Input Tool Query by stroke For example, when you want to input the character 『明』, you can 1. Coose the stroke of the radical: 4. 2. Select the radical 『日』from the candidates. 3. Choose the total strokes of 『明』: 8.
4. Select your target character:『明』. Query by radical For example, when you want to input the character 『明』, you can 1. Choose the total strokes of 『明』: 8. 2. Select your target character: 『明』.
6.3.4 Symbol Input Tool The special symbols are grouped into multiple pages of table. Select the suitable table and click the symbol what you want to get. It allows you to customize the symbol tables.
6-12
Chapter 6 Assistant Tools
6.4 Penpower E-mail Touchpad 6.4.1 Setting If you have custom-installed the “Penpower Email Touchpad” component, the email icon would be displayed on the task bar when the windows start-up. Double-click the icon or right-click the icon to open the menu, and then select “setting”. It will invoke the setting dialog.
Enable ON/OFF line incoming mails checking : Enable/disable the function of auto mails checking. Enable LED Indicator : Blink the LED of touch-pad to hint the incoming emails. Enable Favorite Sound Play : Change the wav file of music to hint the incoming emails. Show Notifiy Window: Show pop-up window to hint the incoming emails.
6-13
 Penpower Junior
6.4.2 Accounts Management You can manage multiple accounts to receive all the emails at once.
6.4.3 Email Address filter You can filter your unnecessary emails. Check this option to notify you only when the listed email is coming.
6-14
Chapter 6 Assistant Tools
6.4.4 Connection You can choose to check email through local area network (LAN) or dial-up internet. You can also set the period time to check email. If your system is offline, after dial-up and check email, it will be disconnected automatically.
6.4.5 Check email manually If you want to check email manually, right-click the email icon to open the menu, and then select “Check Email now”.
6.4.6 Device Test You can click “LED Indicator” button to test if the LED of touchpad is normal.
6-15
Penpower Junior
6-16
Chapter 7 Fast User Switching
Chapter 7 Fast User Switching Penpower Jr. supports Windows Fast User Switching capability when you have more than one user account in Windows. That allow all the users can use Penpower Jr. without reinstalling in each account. For example, in the Windows XP opreation system. Open user account manager page from “Start/ Settings/Control Panel/User Accounts”. Click on “Change the way users log on or off” to open the “Select logon and logoff options” page. Please select “User the Welcome screen” and “Use Fast User Switching” options, then click “Apply Options”. Whatever account is used to login the functions of Penpower Jr. would work.
7-1
Penpower Junior
7-2
Penpower Jr. V7.2 User Manual Penpower Technology LTD., Release: June, 2010 Edition: 1