PART B TECHNIQUE EXPLORE STRIPS & FOLDING
Hyperbody MSc2 Evolutionary patterns deepFormations Delft University of Technology.
PART B INITIAL DESIGN USEFUL FEEDBACKS: 1. The project does not address the architectural characteristics. It is more like a industry product rather than architectural project.
Site Location: Bicycle Trial near Merri Creek Primary School Main User: Most are Cyclists Existing Problems: Exposed under the sunlight; Noise from the busy traffic flow over the bridge; No resting points throughout the whole path. No lighting during evening time; Design Approach: To provide a noise SHELTER where cyclists can park their bikes and have a rest
2.Do not try to attach too many functions which the design is unable to achieve. Instead, make clarity on solving one or two problems that the site really existed in a more specific way. 3. Aim for something the project can passively achieve instead of abusing so-called “renewable energy generator� like solar panel or wind turbine. 4. Site selection should be more clear on a certain location with a map indicated.
SITE MAP
REVISED SITE BRIEF
HARSH SUNLIGHT
SOLAR CALCULATION Local Sunrise Time......: 04 : 52 hrs Sunrise Azimuth.........: 119.66° Local Sunset Time.......: 11 : 26 hrs Sunset Azimuth..........: 240.34° Total Sun Hours.........: 14 hours and 34 minutes Altitude................: -8.46° Azimuth Angle...........: 231.99° Wall azimuth angle......: 0° Horizontal shadow angle.: 232°, * Wall in Shade * Vertical shadow angle...: 13.59° Angle of incidence......: 127.52° LOCAL WIND ROSE
STINK FROM THE DRAIN
BIOMIMICRY RESEARCH GILL SLIT Gill slits are individual openings to gills. Such gills are characteristic of cartilaginous fish such as sharks, and rays. Most of these have five pairs, but a few species have 6 or 7 pairs. Shark gill slits are not covered, but lie in a row behind the head. The anterior edge of a gill slit is motile, moving outward to allow water to exit, but closing to prevent reverse flow. While the shark is moving, water passes through the mouth and over the gills in a process known as “ram ventilation�. While at rest, most sharks pump water over their gills to ensure a constant supply of oxygenated water. Its characteristic such as filter effectiveness and starit power have already been studied and developed into some biomimicry design.
water distribution systems design
hydroelectric turbine design
PRECEDENT STUDY Thematic Pavilion Expo 2012 Client: The Organizing Committee for EXPO 2012 Yeosu - KR Architect: SOMA Country: Korea City: Yeosu Completion: 2012-04
PROTOTYPE DEVELOPMENT
ALGORITHMIC TECHNIQUE In order to parametric modeling the design, I build a system of the solar angle in grasshopper and link it to the component which influenced the twisted strip surface . So now each of the louvers will move in a different angle in order to block the sunlight in a parametric way. And then by using ladybug plug-in in grasshopper, I add panels to react from the results of the solar radiation. So the model can perfectly simulate the performance in realy life. So by analyzing the sun angle of the site in Merri Creek, it is possible to gain the solar angle of a particular time which allow precise control of the rotation of the louvers. The dynamic control of the louvers is the key feature of this project. The angle will be achieve to automatically set to capture most of sun light only allowing smoothed light through the slit barrier.
3D PRINTING MODEL
SITE LOCATION
TECTONIC ELEMENTS
fiber reinforced polymer
detail of the actuator
Fourteen 2-meters tall moveable louvers will be set to respond to changing sun light conditions. The louvers are made of fiber reinforced polymer, which is both strong and flexible. They are controlled by the poles placed at middle part with the actuators, they are capable of asymmetrical bending to allow light to radiate in and out of the as well as avoiding the stink from the drain hole. List of othermaterial used in design: Poles in 150mm diameter x 60 Each panel is 45x200 The joint is 200mm long and the ball is 300mm diameter. Aluminum foil that cover the base and top
detail of pole joint
ENERGY RESOURCE
Piezoelectricity
Solar Power