WELCOME TO 3ERP.COM
Injection Molding China Numerous factors can affect the cost of your material selection in injection molding China. Is it important that the part needs to withstand pressure, weight, temperature variations, or elements or chemicals? High performing and specialty resins arrive at a higher cost. The maintenance cost of your mold can be increased by certain characteristics of your resin.
Plastic Injection Mold The plastic injection mold tooling evaluated and the process extremes must be completely investigated before it’s called into action. This ensures repeatable and consistent production of flawless molded parts. This is how tooling weaknesses are corrected and traced.
Mold Making Supplies Whatever the project, some challenges may be faced by product designers, engineers, and industrial designers while designing for injection molding. The designers must avoid these three mistakes for achieving efficient injection molded parts from mold making supplies.
Plastic Mold Making For a given thickness, stress concentration varies with radius. Thus, the radii of sharp corners need to be closely watched during the plastic mold making. For R/T values, less than 0.5, the stress concentration factor is high but the concentration lowers for R/T values over 0.5. The internal radius must be a minimum of 1 time the thickness and it is recommended.
3E Rapid Prototyping Limited
Address: No. 18-1 Gangkou Avenue, GangKou Town, ZhongShan, GuangDong, 528447 China Phone: +8676088411100 Fax: +8676088411110 Email: info@3erp.com Website: https://www.3erp.com/