PULLER-TENSIONER WB 1500/5-100 PULLER PERFORMANCE Max. pulling force: Max. speed: Speed at max. pulling force:
50 kN 6.8 km/h 4.8 km/h
TENSIONER PERFORMANCE Max. tensioning force: 50 kN Speed at max. tensioning force: 6.8 km/h Min. tensioning force: approx. 4 kN BULL WHEELS Number of bull wheels: Diameter of bull wheels: Groove diameter: Number of ropes/conductors:
2 1500 mm 45 mm 1, optional 2
DIMENSIONS/WEIGHT Length x width x height: Weight:
4641 x 2267 x 2474 mm 4500 kg
ENGINE – Max. 100 kW EU stage IV final emission standards (without particulate filter) – Liquid-cooled diesel engine with automatic rpm control – 24 V system with high capacity battery DRIVE SYSTEM – Each bull wheel with a completely enclosed individual drive unit (motor + brake + gear box) for minimal maintenance and high efficiency – Automatically controlled oil cooling system – Hydraulic system to control 1 drum stand – Each bull wheel with an automatically activated safety brake system CONTROL SYSTEM – Control of conductor in/out via joystick – PLC controlled machine for optimized productivity and safety – WVGA Color display for monitoring the pulling/tensioning force, hydraulic-, engine- and electrical systems with intelligent diagnostic and troubleshooting system – ZECK stringing data record system with USB interface – Automatic Tensioning System (ATS) – Overload protection system GENERAL FEATURES – 1 rigid axle chassis with mudguard and parking brake for up to 30 km/h – Lockable aluminum cover with noise reduction kit – Back support via hydraulic sprag – Front support via hydraulic cylinder – Automatic rope/conductor clamping system with grounding device – Rope-in device for max. 5° rope deflection – For 1 rope (right- or left-hand lay) – Working platform with fall prevention device
ZECK GmbH |
+49 9542 9494-0 |
B 4
OPTIONAL FEATURES – Particulate filter – Version for 2 conductors (right-hand-lay ropes) – 2 spring-mounted axle chassis with pneumatic brake, lighting system and mudguard for up to 80 km/h – Cable or radio remote control – Electronic printer for ZECK stringing data record system – Synchronization-System – Remote diagnosis with GPS modem – Hydraulic system (700/1000 bar) to power compression tools – Biodegradable hydraulic oil – Pre-cleaner for engine air filter – Arctic kit – with preheating system for up to -30 °C – Large, lockable tool box – Holding device for hose set – Hydraulic rope clamping unit – Grounding plate – Electronic control of drum pre-tension
Special modifications or equipment on request.
KEY FACTS
Full electronically controlled puller-tensioner for 1 rope/ conductor (optional 2) with 2 bull wheels (Ø 1500 mm) and groove diameter 45 mm (optional 60 mm). Max. pulling/ tensioning force of 50 kN and ZECK stringing data record system.
+49 9542 9494-94 | www.zeck-gmbh.com | info@zeck-gmbh.com
Modification and errors excepted. Illustrations show in part optional equipment. Technical data vary according to modification and options. Machine performance is calculated at sea level at 20 °C.
B4-302 03-2016