R220 Recommended Tools and Equipment

TENTATIVE Recommended Tools and Equipment For installation and servicing of Sony Digital Cinema equipment.

T ools to be car r ied by the engineer • 3mm hex key - lamp locking • 5mm hex key - lamp XY adjustment • Philips screw driver #1 • Philips screw driver #2 (or Sony screwdriver) • 13mm socket (NOT spanner) to split projector • 17mm socket/spanner - lamp nut • 24mm spanner - adjustment the of the feet • 30mm spanner – lock nut on the feet Equipment to be car r ied by the engineer • Wireless network device - Access point/hub, needed for setting up in the cinema • Network cable – 6m • RS232 serial cross-over cable (comms PC to PJ direct) 5m, and long extension into auditorium • USB memory stick (Sony 4GB high speed, for KDM keys etc) • Torch (flashlight) • USB hard disk 250GB or bigger, for test DCP’s, to carry out test ingest and play back tests.

• USB extension cable, to allow connection to external supply power for USB HDD. • Laptop PC loaded with all Sony software and accessory software • Power extension cable/multiblock Back up equipment to be car r ied by the engineer • Light meter (to set screen brightness, and/or shoot the colours) • Usual engineers tools – voltmeter, pliers, screwdrivers etc.

• CAT5 cable tester • Laser distance measurement tool (Leica Disto or equivalent) • HD-SDI DL test pattern generator.

• DVI Dual Link test pattern generator Slide 1