Paint Protection Glass Protection Wheel Protection Leather, Vinyl, Rubber, Tire & Plastic Protection Fabric & Carpet Protection Cleaners, Degreasers, Shampoo, Scents, Maintenance Polishes Solvents
GLASS MOLECULE Nano Protective Shield • • • • • • •
Hardens to form a protective shield Prolongs surface perfection Relentless water beading Unique UV absorber Silicone Free Easy on, easy off Single stage and clear coat safe
NANOSKIN GLASS MOLECULE is a chemical solution that uses sol-gel process to form a colloid of solid particles under 100 nanometers in size, which hardens to form a protective shield (glass-like film), prolonging surface perfection, NOT a wax or Teflon. Durability is strong with a consistent 25~30 car washes. Best results are achieved by applying with 0.8mm mini HVLP spray gun@20PSI in very thin coats. GLASS MOLECULE has a 24-48 hour cure time which requires no attention from the user. After the cure, GLASS MOLECULE will be glossier and harder. Directions: 1. Rinse car with water to remove dirt and grease, then dry. 2. Clay the surface to remove contamination. 3. Remove any oil & grease with IPA glass cleaner. 4. Point spray nozzle towards surface area and spray evenly. (0.8mm HVLP mini spray gun) 5. 2 times application is needed. 6. Allow to haze for 30 minutes, then wipe off with clean dry microfiber towels.
13.5oz
Description: • Uses sol-gel to synthesize gels with particle size less than 100nm, as shown in Figure A & Figure B. • By combining with polymer materials or petroleum solvent formulas, the mixture can be directly coated on a material surface by spraying, dipping or painting.
• A glass-like protective film is created. • Imparts excellent protective characteristics to most types of surfaced including clear coated, painted, aluminum, polished and anodized. • Film Hardness 3H-4H. (Meets ASTM D3363 criteria.) • GLASS MOLECULE offers excellent water repellency on the treated surface. Contact angle measurements of the blends and composites were conducted in a FTA-100 series.
Performance Water Repellency •
Introduction Once the protective shield was coated on the painted sheet, the degree of the contact angle increment was tested. The purpose of this test was to verify the water repellency after the coating of the protective shield on the experimental painted sheet.
•
Preparations and treatment of samples Sample 1: Untreated painted sheet (uncoated) Sample 2: Painted sheet coated with the protective sheet
•
Analysis method A contact angle meter (FTA-100) was used to measure the contact angle of water droplets. A distilled water droplet was dropped onto a sample, and the contact angle was measured. The droplet amount was 2μL, and five contact angles were measured respectively for each sample to find the average value.
•
Analysis Result Contact angle of water droplet
Sample 1 - Untreated painted sheet (uncoated)
82.4±2.3
Sample 2 - Painted sheet coated with protective shield
109.3±2.0
Hardness Test 1. Pre-test preparations Pencil hardness testing mechanism preparation (1) Pencils of 17 levels of hardness are sharpened and laid out as pictured. The range of hardness from soft to hard are 6B 5B 4B 3B 2B B HB F H 2H 3H 4H 5H 6H 7H 8H 9H
3. Test operations: (1) The hardness test is conducted from the softest to hardest. (2) The pencil is placed in the measured as pictured
(3) The measurer is pushed across the surface of the painted metal sheet at a speed of 5-10cm per second. If there is a mere pencil mark that can be erased, the pencil is not hard enough to scratch the surface. (2) A pencil hardness measurer meeting the ASTM D 3363 criteria is setup.
(4) As hardness increases, a thread of paint is scraped off from the surface, as pictured. 2. Preparation and processing of sample slides: (1) Painted steel plates are buffed and cleaned. (2) The protective film is evenly sprayed onto the cleansed surface of the steel plates. (3) Once dry, the surface is waxed and polished. •
4. Results: Threshold of 3H
Salt Water Test
High/Low Temperature Test 1. Foreword: Metal sheets coated with GLASS MOLECULE are placed in high temperature (150℃) and low temperature (0℃) environments to test contact angles as an experience to see whether the product retains its water repellency under extreme temperatures. 2. Processing and preparation of samples: Sample1: Painted surface coated with GLASS MOLECULE Sample2: Painted surface coated with GLASS MOLECULE after being placed under high heat (150℃) Sample3: Painted surface coated with GLASS MOLECULE after being placed under cold temp (0℃) 3. Method of analysis: 2μL of water is dropped on each sample. The contact angle at which the droplet touches the surface of the sample is measured using the FTA-100. This procedure is done at five different points on each sample and the average is taken. Contact Angle Sample 1: Painted surface coated with GLASS MOLECULE
109.4±2.3
Sample 2: Painted surface coated with GLASS MOLECULE after being placed under high heat (150℃)
108.1±0.7
Sample 3: Painted surface coated with GLASS MOLECULE after being placed under cold temp (0℃)
107.2±0.8
1. Foreword: A painted surface coated with GLASS MOLECULE is soaked in 0.1M salt water for 48 hours, after which the contact angle is measured to see whether GLASS MOLECULE retains its water repellency after going through extreme environments. 2. Processing and preparation of samples: Sample1: Painted surface coated with GLASS MOLECULE Sample2: Painted surface coated with GLASS MOLECULE, soaked in 0.1M salt water for 48 hours. 3. Method of analysis: 2μL of water is dropped on each sample. The contact angle at which the droplet touches the surface of the sample is measured using the FTA-100. This procedure is done at five different points on each sample and the average is taken. Contact Angle Sample 1: Painted surface coated with GLASS MOLECULE
109.4±2.3
Sample 2: Painted surface coated with GLASS MOLECULE, soaked in 0.1M salt water for 48 hours
105.9±0.6
Wash Durability Test 1. Foreword: The purpose of this report is to state the effects of washing on a car body coated with GLASS MOLECULE; whether it effects the water repellency. The test is done by washing the same surface with soap water and sponge 1,000 times, then measuring the contact angle. 2. Processing and preparation of samples: A metal sheet 5cm x 5cm in size is coated with GLASS MOLECULE. After it air-dries, the pre-washed contact angle is measured. 3. Method of analysis: 2μL of water is dropped on the sample. The contact angle at which the droplet touches the surface of the sample is measured using the FTA-100. This procedure is done at five different points on each sample and the average is taken. 4. The wash test is done according to the experiment setup regulated by ASTM D2486. The sample secured on the machine counter where the sponge, moistened with neutral soap, conducts the washing process. Each wipe to and forth counts as one time, and the surface is washed 1,000 times. Upon completion, the sample is removed from the machine, rinsed with water, air-dried, and the contact angle is measured again.
4. Results Contact Angle Painted surface coated with GLASS MOLECULE – Pre-wash
107.4±0.5
Painted surface coated with GLASS MOLECULE – After 1,000 washes
105.3±0.5
Implication: The outstanding water repellency quality of GLASS MOLECULE remains even after as many as 1,000 washes.
Test against Acidity/Alkalinity 1. Foreword: The purpose of this report is to test and state the effects of acid or alkaline on GLASS MOLECULE. Samples are soaked for one day in strong acid, weak acid, strong alkaline, weak alkaline, or tap water for one full day. The contact angle of each is measured to examine water repellency. 2. Processing and preparation of samples Metal sheets 5cm x 5cm in size are coated with GLASS MOLECULE. After they air-dry, the pre-soak contact angle is measured.
3. Method of analysis: 2μL of water is dropped on each sample. The contact angle at which the droplet touches the surface of the sample is measured using the FTA-100. This procedure is done at five different points on each sample and the average is taken. The following five solutions are prepared: A. Strong acid solution – 1N concentrated hydrochloric acid (pH<1) B. Weak acid solution – 0.1N acetic acid (pH = 4.0) C. Weak alkaline solution – 0.1N bicarbonate (pH = 9.0) D. Strong alkaline solution – 1N sodium hydroxide (pH>13) E. Neutral solution – tap water A metal sheet coated with GLASS MOLECULE is soaked in each of the solutions for 24 hours, removed, rinsed, and air-dried. The contact angle of each is then measured. 4. Test Results Solution
Pre-soak Contact Angle
110.5±0.9
Neutral solution Strong acid solution
Post-soak Contact Angle
110.0±0.5
Paint peeled off
Weak acid solution
110.1±0.8
Weak alkaline solution
107.8±1.3
HYDRO EXPRESS Hydrophobic Spray Polymer • • • • • • • •
The most advanced spray polymer The missing link between washing and waxing A spray polymer that actually repels water Contains durable anti-static polymer Lasts up to 2 months Restores perfect finish Enhances reflections on shiny materials May also be used on glass, chrome and plastic
If you’re looking for a perfect finish to your detail, spray on NANOSKIN HYDRO EXPRESS. It will not disappoint! Through the use of new nanotechnology formula, NANOSKIN has created a spray polymer that actually repels water, dissipates static, lasts up to 2 months, and adds additional protection to your finish. NANOSKIN HYDRO EXPRESS can also be used on glass, chrome, and plastic. The spray dries crystal clear on any surface and enhances reflections on shiny materials, like chrome wheels and trim. It’s so easy, you can detail a full size car in less than 10 minutes. Directions: 1. Shake well. Use only on clean, cool paint and out of direct sunlight. 2. Mist HYDRO EXPRESS onto one section at a time. 3. Quickly spread product with clean dry microfiber towel. 4. Turn to a dry portion of the towel, then wipe dry.
16oz
VITALITY Nano Spray Wax • • • • • • •
Water-based & silicone free formula Relentless water beading 2~3 months durability Adds anti-static polymer Conceals minor scratches and swirl marks Protects from harmful UV rays Wheel conditioner
NANOSKIN VITALITY is a water-based & silicone free spray wax. The combination of advanced polymer and nano wax creates a long-lasting brilliant wet-look shine with outstanding water repellency. Added anti-static polymer will help dust from settling on the surface. Applying your wheels with VITALITY would also be a great idea. VITALITY changes the surface polarity of your wheels to repel brake dust particles. Directions: 1. Shake well. Use only on clean, cool paint and out of direct sunlight. 2. Mist VITALITY onto one section at a time. 3. Spread product with clean dry microfiber towel. 4. Turn to a dry portion of the towel, then wipe dry.
16oz
MAJESTIC Hydrophobic Crème Wax • • • • • • • •
Self-cleaning premium wax Relentless water beading Produces unbelievably deep, vibrant color and a dramatically clear wet-look Protects against oxidation, corrosion, UV rays and surface degradation Fills and seals fine scratches High durability formulation Single stage and clear coat safe
MAJESTIC is a cream wax designed to add a high gloss and rich luster to new or used vehicles. MAJESTIC contains nano-sized white carnauba which repels water excellently and is much more efficient at filling and sealing fine scratches. This premium wax is a self-cleaning, high durability formulation that is easy to use and lasts consistent 3-4 months. Hand or machine application work equally well. Shake well before using. Directions: 1. Shake well. Use only on clean, cool paint and out of direct sunlight. 2. For hand application, use a wax applicator in overlapping, circular motion. Allow to haze, then remove with a clean microfiber towel. Fold in quarters and rotate often to maximize wax removal efficiency and help prevent scratches. 3. For orbital machine application, wax with slow speed (1200 rpm) and a clean finishing foam pad.
16oz
HYDROPHOBIC Nano Paste Wax • • • • • • •
Advanced polymer based nano wax Deep gloss & Wet-look Water repellent Light cleaning properties Dries instantly Won’t stain trim Easy to apply and remove
NANOSKIN HYDROPHOBIC provides relentless water beading, and its nano-sized polymer with light cleaning properties fills the pores of the paint. With unique nano tech and formulated white carnauba, HYDROPHOBIC provides warm, wet shine and deep gloss. Long-lasting hydrophobic effect keeps your ride clean and dustfree as long as rain drops take dirt away. Apply in any direction you choose. Best results are simply achieved by applying in very thin coats. As you may notice it dries instantly. You can remove it immediately, or finish applying it to the rest of your car. Directions: 1. Rinse car with water to remove dirt and grease, then dry. 2. Using a clean applicator or soft pad, apply evenly to a section at a time using overlapping, circular motions. 3. Allow to dry to a haze and wipe off with a clean dry cloth. 4. Buff lightly for a deep gloss shine.
250g
HYDROPHOBIC+ Premium Nano Paste Wax • • • • • •
New hydrophobic polymer formula Introduce a new dimension of gloss Provides relentless water beading Delivers unparalleled shine and protection Protects against UV rays and surface degradation Easy to apply and remove
NANOSKIN HYDROPHOBIC+ introduces a new dimension of gloss and protection. It dramatically darkens color, brings out the full richness of the paint, and creates clear, sharp reflections for the ultimate show car shine. New hydrophobic polymer formula provides relentless water beading and protection against oxidation, corrosion, UV rays and surface degradation. This new breakthrough technology builds such incredible protection and surface tension that water beads up and just glides off your paint finish, wash after wash! Directions: 1. Rinse car with water to remove dirt and grease, then dry. 2. Using a clean applicator or soft pad, apply evenly to a section at a time using overlapping, circular motions. 3. Allow to dry to a haze and wipe off with a clean dry cloth. 4. Buff lightly for a deep gloss shine.
150g
Description: ď Ź Nano vehicle wax means the wax which, if applied onto the paint surface or the metallic stoving varnish on the body, will make it capable of nano characteristics. ď Ź Self-cleaning function means that after the nano vehicle wax is applied on the surface, the water drop contact angle is over 100 degrees, and the body can be easily cleaned by sponge and clean water.
• Nano vehicle wax shall meet the following requirements:
• Reference Information: 1. ISO 16700:2004(E)：Microbeam Analysis -- Scanning Electron Microscopy -Guidelines for Calibrating Image Magnification 2. CNS 6928 Method for testing the washability of the latex paint for indoor use 3. ASTM D3836-94(1999)：Standard Practice for Evaluation of Automotive Polish
Performance Standard Testing Method – See appendix 1 –
• Method for testing nano vehicle wax characteristics for details on testing nano characteristics. – See appendix 2 –
• Method for measuring contact angle of water drop for details. – See appendix 3 –
• Method for testing sliding angle of water drops for details. – See appendix 4 –
• Method for testing remaining water drops for details. – See appendix 5 –
• Method for washing test for details on wash durability test.
Appendix 1 Method for testing the nano characteristics of nano vehicle wax The nano structure formed by applying the wax onto the vehicle paint surface shall be analyzed by scanning electron microscopy. 1. Equipment See ISO 16700:2004 (E): Microbeam Analysis Scanning Electron Microscopy - Guidelines for Calibrating Image Magnification for the requirements on the microscopy. 2. Preparing the testing piece The test piece is a piece of painted sheet in the size of 1cm x 1cm and treated by base, color and surface coating (clear coat). Directly apply the vehicle wash wax onto the test piece for testing; attach the test piece flatly on the fixer of the scanning electron microscopy; see ISO 16700:2004 (E) for details on preparing the test piece. Adjust the magnification rate appropriately to observe the dimensions of the nano structures formed on the surface of waxed test piece. (In the case below, the magnification rate is 50,000X).
3. The principles behind the test The electron microscopy provides the characteristics of the nano materials such as the dimensions, distribution and shape on the basis of the signals produced by the effect between the electron and substance. Compared with other methods, in addition to the direct measurement of the dimensions, the biggest advantage of microscopy lies in that the captured images can be used to tell the in what shape the powder is and it can also be used on materials with dimensions ranging from nanometers to microns. 4. Precautions during the test 4.1 The test is a dry test, and do not dip the test piece into solutons. 4.2 The system must be extracted to vacuum pressure and anything that can easily contaminate the vacuum chamber must be dealt with. 4.3 The testing equipment must be first validated with traceable standard test piece to ensure its accuracy. 4.4 The test piece may be gold plated if necessary to improve its readability in the system.
5. How to present the test results The test report shall comprise the following: 5.1 Test date/place/instrument model number 5.2 Source of the test piece or the manufacturer 5.3 Treatment conditions before waxing the test piece 5.4 The hydrophobic structures in the product specifications must appear and at least one dimension must be below 100 nm on average, as shown in Figure A. Figure A. Analyzing the surface structure on the paint surface after the nano vehicle wax sold in the market is applied by electron microscope.
Figure B. Analyzing the surface structure on the paint surface after the non-nano vehicle wax sold in the market is applied by electron microscope.
Appendix 3 Method for testing water drop sliding angle 1. Device and equipment Device for testing water drop sliding: a platform, the sloping angle of which can be adjusted and thus the water drop sliding angle can be measured. The following picture may serve as a reference for such a platform:
2. Preparing the test piece The test piece is a white painted plate in the size of 25cm x 50cm and treated with base, color and surface coating (clear coat). 3. Treating the test piece Directly apply the nano vehicle wax on the test piece and polish it evenly as waxing a vehicle. 4. Test method Apply a drop of 50 uL volume by a syringe onto the test plate, adjust the angle for zero degree and record the angle when the drop begins to slide. The water sliding degree may be read as precisely as 1 degree. 5. How to present the test results: The test report should comprise: 5.1 Test date/place 5.2 Source and manufacturer of the painted test piece. 5.3 Treatment conditions before waxing the test piece 5.4 Average sliding angle value after the surface is waxed.
Appendix 4 Method for testing remaining water drops 1. Device and equipment Use the device for testing sliding water drops shown in appendix 3 as the reference; however, above the platform there must be a water storage cup, from which water can drop. 2. Preparing the test piece The test piece is a white painted plate in the size of 25cm x 50cm and treated with base, color and surface coating (clear coat). The test piece can form a sliding pathway because one side of the test piece is about 80 cm longer than the other side. 3. Treating the test piece Directly apply the nano vehicle wax on the test piece and polish it evenly as waxing a vehicle. 4. Test method The sloping angle of the testing plate is fixed at 30 degrees. Add 1 ml ink into 1 L water. Adjust the flow adjustment valve on the cup so that the water can drop onto the plate at the flow rate of 50 mL/min; after about half an hour, calculate the percentage of lattices with remaining water drops in transparent acrylic plate with one thousand lattices, as shown in the picture below . Obtain the mean by repeating the test for three times.
5. How to present the test results: The test report should comprise: 5.1 Test date 5.2 Source and manufacturer of the painted test piece. 5.3 Treatment conditions before waxing the test piece 5.4 The average percentage of repetitions of tests and the lattices where water drops remain.
Appendix 5 Method for washing test for details on wash durability test. 1. Device and equipment Device for wash durability test: using a device which meets the provisions in CNS 6928:1981 â&#x20AC;&#x153;Method for testing wash durability of latex paint for indoor useâ&#x20AC;?. 2. Preparing the test piece The painted test piece is a white painted plate in the size of 5cm x 5cm and treated with base, color and surface coating (clear coat). 3. Treating the test piece Directly apply the nano vehicle wax on the test piece and polish it evenly as waxing a vehicle. 4. Test method 4.1 Fix the test piece onto the platform for wash durability test. 4.2 Fix a sponge or brush and the friction surface is kept wet by neutral soap water and frictions the test piece surface. 4.3 Washing back and forth is counted as one time the friction times are set at 1000. 4.4 Remove the test piece when the test is completed, clean it with water, dry it in wind and measure the contact angle.
5. How to present the test results: The test report should comprise: 5.1 Test date 5.2 Source and manufacturer of the painted test piece 5.3 Treatment conditions before waxing the test piece 5.4 The manufacturer and model of the device for wash durability tests. 5.5 How many times the test piece is washed and the washing conditions.
Paint Protection Glass Protection Wheel Protection Leather, Vinyl, Rubber, Tire & Plastic Protection Fabric & Carpet Protection Cleaners, Degreasers, Shampoo, Scents, Maintenance Polishes Solvents
RAIN Glass Sealant • • • • • • •
Water-based formula Seals the microscopic pores of glass Contains durable anti-static polymer Repels rain, sleet, and snow Maintain a high level of visibility Significantly improves scratch resistance Lasts months, not weeks
RAIN provides a durable, invisible coating to your windshield giving it rain repellency. The invisible coating repels rain, sleet, and snow to maintain a high level of visibility, dramatically improving weather driving visibility. The treatment also makes for easy removal of ice, frost, salt, mud and bugs. RAIN contains durable anti-static polymer which will help dust from settling on your glass. RAIN also significantly improves scratch resistance. ALWAYS USE YOUR WINDSHIELD WIPERS AS NECESSARY. Directions: 1. Clean with glass cleaner and thoroughly dry surfaces before treating. 2. Mist RAIN onto the surface evenly. 3. Spread product with clean dry lint-free microfiber towel. 4. Turn to a dry portion of the towel, then wipe dry. 5. Reapply RAIN to ensure complete and uniform coverage, then wipe dry. 6. Wait 10~15 minutes, then sprinkle with water or glass cleaner and wipe with a dry lint-free towel until crystal clear.
16oz, 1Gal
RAIN PLUS Hydrophobic Glass Treatment • • • • • •
Advanced fluorosilane polymer technology Exceptional oil & water repellent Repels rain, sleet, and snow UV resistant 12~18 month durability Applies to exterior glass
RAIN PLUS is a solvent-based glass treatment by using advanced fluorosilane polymer technology. The invisible coating provides exceptional oil & water repellency while maintaining a high level of visibility, dramatically improving weather driving visibility. With strong UV resistance, the coating has average 12~18 month durability. RAIN PLUS also makes for easy removal of ice, frost, salt, mud and bugs. ALWAYS USE YOUR WINDSHIELD WIPERS AS NECESSARY. Directions: 1. Clean with ammonia glass cleaner and let it sit on the surface for 3~5 minutes then wipe off with lint-free glass towel. 2. Mix part A & part B and shake for 90 seconds. 3. Apply mixed product onto the surface , and spread product with non-woven towel. 4. Allow to haze. 5. Wipe off the haze with lint-free glass towel.
16oz
ANTI-FOG Interior Glass Anti-Fog Treatment •
Eliminates and prevents interior fogging and steaming instantly!
•
Contains durable anti-static polymer
•
Windshields, side and rear windows
•
Safe for painted surfaces
ANTI-FOG provides a durable, invisible coating to your interior glass preventing it from fogging and steaming. The invisible coating maintains a high level of visibility, dramatically improving weather driving visibility. ANTI-FOG contains durable antistatic polymer which will help dust from settling on your interior glass. Directions: 1. Clean with glass cleaner and thoroughly dry surfaces before treating. 2. Mist ANTI-FOG onto the surface evenly. 3. Quickly spread product with clean dry lint-free microfiber towel. 4. Turn to a dry portion of the towel, then wipe dry. 5. Reapply ANTI-FOG to ensure complete and uniform coverage, then wipe dry. 6. Wait 10~15 minutes, then sprinkle with clear water and wipe with a dry lint-free towel until crystal clear.
16oz
ADDITIVE Windshield Washer Fluid/Glass Cleaner Additive •
Provides residual water beading after use
•
Helps revitalize glass sealant
•
Improves ordinary washer fluid/glass cleaner performance
ADDITIVE is specially formulated to add to your windshield washer fluid/glass cleaner. ADDITIVE provides residual water beading after use and helps revitalize glass sealant. This powerful formula will also help improve ordinary washer fluid performance to remove stubborn residue, road grime, bird droppings, and tree sap. General dilution is 1-2 ounces per gallon of washer fluid/glass cleaner. This bottle shall contain enough additive to treat 12 gallons of washer fluid/glass cleaner. ALWAYS USE YOUR WINDSHIELD WIPERS AS NECESSARY. Dilution: 4 caps of ADDITIVE to 1 gallon of washer fluid/glass cleaner Directions: For Windshield Washer FluidAdd 4 caps of ADDITIVE to 1 gallon of “off the shelf” windshield washer fluid. For Glass CleanerAdd 4 caps of ADDITIVE to 1 gallon of “ready to use” glass cleaner.
16oz
Paint Protection Glass Protection Wheel Protection Leather, Vinyl, Rubber, Tire & Plastic Protection Fabric & Carpet Protection Cleaners, Degreasers, Shampoo, Scents, Maintenance Polish
BRAKE DUST Wheel Protective Shield • • • • • • •
Creates a firm barrier Hardens to form a protective shield Repels brake dust and road grimes Amazing heat resistance Relentless water beading Spray-on, leave-off Single stage and clear coat safe
NANOSKIN BRAKE DUST is a scientific breakthrough that introduces a new dimension of wheel protection. This formula forms an amazing heat resistant barrier that repels brake dust and road grime. New hydrophobic polymer provides relentless water beading and protection against conventional acidic wheel cleaners. This breakthrough technology builds such incredible protection that wheels stay cleaner longer and clean up easier. A harsh wheel cleaner will no longer be necessary. Directions: 1. Clean and thoroughly dry surfaces before treating. 2. Mist BRAKE DUST onto the surface until the surface is fully covered. 3. Allow to dry.
16oz, 1Gal
Paint Protection Glass Protection Wheel Protection Leather, Vinyl, Rubber, Tire & Plastic Protection Fabric & Carpet Protection Cleaners, Degreasers, Shampoo, Scents, Maintenance Polishes Solvents
LV RINSE Leather & Vinyl Cleaner • • • • •
Non-alkaline cleaning agents Contains no waxes, oils or additives Loosens and suspends the dirt without leaving any deposits or impediments Falls within the Ph range of leather itself. Safer for leather
LV RINSE Leather & Vinyl Cleaner is a blend of selected, non-alkaline cleaning agents designed to clean leather safely and thoroughly without the harshness or potentially damaging effects of saddle soaps, which are alkaline. The foaming action loosens and suspends the dirt so that it can be easily rinsed away without leaving any deposits or impediments. Its balanced formula falls within the pH range of leather itself, and therefore, is safer for leather. Since it is alkaline-free it contributes to the prolongation of fiber life. NOTE: This product is not recommended for napped suede or glove soft leather. Leather that has cracked from age or neglect cannot be restored by this or any other known product. Directions: 1. Remove all loose dirt by vacuuming. 2. Mist a damp towel with LV RINSE and massage into the upholstery. Particularly soiled areas may require agitation with a white tampico brush or horsehair brush. 3. Use the cleaner sparingly and do not allow it to dry on the upholstery. 4. Wipe away excess cleaner with a clean, dry microfiber towel.
16oz, 1Gal
NOURISH Leather & Vinyl Cleaner/Conditioner • • • • • • •
One step leather cleaner and conditioner with UV absorber Contains the finest natural oils for leather Leaves leather soft and supple Restores new appearance and natural feel to leather Makes scratches and abrasions less visible Help penetrates, softens and lubricates leather Easy to use: Spray on and wipe off
NOURISH is a one step leather & vinyl cleaner and conditioner. Its unique UV absorber help protect against premature aging and damage from harmful UV rays. NOURISH contains the finest natural oils for all type of leather, and it restores new appearance and natural feel while leaving leather soft and supple. Its liquid formula conditions and makes scratches & abrasions less visible. NOURISH may be used on all interior leather, vinyl and plastic. NOT FOR USE ON NUBUCK OR SUEDE. Directions: Use on any color. 1. Always test the product in an inconspicuous area to make sure treated surface is acceptable. 2. Directly spray onto the leather or apply with clean soft cloth. 3. Brush into leather. 4. Buff gently with soft cloth.
16oz, 1Gal
FEED Leather & Vinyl Protectant • • • • • • •
Water, oil and stain repellent for finished leathers Partially fluorinated polymer Exceptional oil, water and alcohol repellency Meets all VOC regulations Ambient cure Little or no effect on appearance of finished leather Easy to apply – Gently rub Into leather, wipe off excess
NANOSKIN FEED is a ready‐to‐use cream that protects finished leathers without altering the feel or appearance of the leather. Unlike many protectors, it does not leave the leather with an artificial sheen. Its fluorinated polymer provides exceptional oil, water and alcohol repellency while meeting all VOC regulations. Apply in a circular motion using a lint free cloth, wiping off any excess after working it into the leather. FEED may be used on auto interior leather & vinyl, leather upholstery, leather apparel: shoes, pants, jackets, skirts, luggage, briefcases and handbags. NOT FOR USE ON NUBUCK OR SUEDE. Directions: 1. Working on a clean, dry surface yields the best result. 2. Wipe onto the leather with a soft dry lint-free cloth. 3. Let the product set on leather for approximately 5 minutes. 4. Wipe off excess with soft dry lint-free cloth.
16oz, 1Gal
Before Left: water drop Right: cook oil drop
After Left: water drop Right: cook oil drop
Performace
•
•
•
•
Water/Alcohol Repellency Drop Test (Dupont Test Method) Introduction Repellency was measured by applying 3 drops of test liquid and observing wetting of the surfaces. If the drops were repelled for longer than 10 second the surface was judged to be repellent to that test liquid. Preparations and Treatment of Samples Test liquids ranged from 2% Isopropyl Alcohol (1 rating) to 50% Isopropyl Alcohol (6 rating) Test Method The higher the concentration of Isopropyl Alcohol (higher number rating), the more repellent the surface.
Oil Repellency Drop Test (AATCC Test Method 118-1989) •
Introduction Repellency was measured by applying 3 drops of test liquid and observing wetting of the surfaces. If the drops were repelled for longer than 30 seconds the surface was judged to be repellent to that test liquid.
•
Preparations and Treatment of Samples Test liquids ranged from mineral oil (1 rating) to Decane (6 rating).
•
Test Method The higher the number test liquid, the more repellent the surface. Decane (6 rating) is more difficult to repel than Dodecane (5 rating), which is more difficult than Tetradecane (4 rating) and so forth.
•
Analysis Result All leathers repelled at least a 4 oil and most repelled a 5 or a 6 oil with the average of all surfaces tested equal to 5.3 out of 6.
Analysis Result All leathers repelled 50% Isopropyl Alcohol and were rated a 6 in water repellency.
BLACK AWESOME VRT Dressing & Protectant • • • • • • •
Silicone-free, water-based formula produces an incredibly deep, rich high gloss shin provides long-lasting UV absorber and water proof Imparts high gloss to vinyl, rubber, tire, plastic, leather, wood and stone Dilutes up to four to one, varying the gloss from high to satin Vinyl, rubber, tire, plastic, leather, wood and stone. Clear coat safe
BLACK AWESOME is the choice for professionals or end-users looking for a high performance dressing which can be used in any silicone sensitive environment. Its VOC compliant water based formula produces an incredibly deep, rich high gloss shine. By using advanced polymer, it provides long-lasting UV absorber and actually repels water each time you clean your car. Dilute up to four to one, varying the gloss from high to satin. One product, multiple uses...vinyl, rubber, tire, plastic, leather, wood and stone. Dilutions: Tire (High gloss) Tire (Satin gloss) Leather, Vinyl, Rubber & Plastic Wood & Stone
RTU ~ 1 : 1 1:1~2:1 2:1~3:1 3:1~4:1
Directions: 1. Dilute one part of product up to four parts of water. 2. Spray directly on the surface or toweling and apply evenly to avoid streaking. 3. Wipe off excess.
16oz, 1Gal
WET LOOK Tire Dressing • • • • • •
Silicone based dressing Super high shine Tire, rubber moldings & bumpers Quick dry, low sling-off formula Highlights your great looking investment Works great on wet tires
You have waxed and polished your vehicle, removed stains and odors and looked after the upholstery and leather. Now it's time to tackle the shine of your tires. Nothing gets noticed more quickly after waxing than your glossy tires. NANOSKIN WET LOOK Tire dressing is a super high shine, silicone based, dressing for exterior surfaces. Brush or sponge application is recommended. Quick dry, low sling-off formula works great on wet tires. WET LOOK really completes "the look“ that auto detailers want.
Directions: 1. For best results, apply to a clean, dry surface. 2. Spray or wipe on surface and let dry to a beautiful shine.
16oz, 1Gal
Paint Protection Glass Protection Wheel Protection Leather, Vinyl, Rubber, Tire & Plastic Protection Fabric & Carpet Protection Cleaners, Degreasers, Shampoo, Scents, Maintenance Polishes Solvents
FABRIC Fabric & Carpet Protector • • • • • • •
Creates a protective finish Effectively resists soils and stains Safe for all types of fabrics and fibers Water & oil repellent Dries quickly Spray-on, leave-off Home, office, boat, auto, and many other applications
NANOSKIN FABRIC is a professional strength treatment that creates a protective finish that effectively resists soils and stains. It is safe for all types of fabrics and fibers including silk and sisal. Soils and spills simply blot from the surface. FABRIC is easy to use, and the solvent formulation dries quickly. Perfect for use wherever your valuable investments need to be protected from stains and spills: in the home, office, boat, auto, and many other applications. Directions: 1. Apply to any new or cleaned fabric. 2. Test fabric for color stability before use. 3. Hold applicator 8 to 10 inches away and spray in a sweeping motion. 4. Do not saturate. A light coating is all that is needed. 5. Allow 1 hour drying time before using treated fabric. NOTE: FABRIC will migrate (spread) and penetrate fabric extremely well. Over saturation will result in prolonged drying time.
16oz, 1Gal
Prepare a chamois Center treated with FABRIC After cured, put into a tray with water
Apply several water drops & oil drops onto the treated center area Left 4 drops: water drop Right 7 drops: oil drop
Applications • • • • • •
Performance
Test fabric for color stability before use. Spray evenly until fabric is slightly damp to the touch. May be applied after immediately after wet or dry cleaning. After application, allow fabric to dry before use. Product will cure in 2 stages. – Stage one at 24 hours. – Stage two at 72 hours. After curing, protector will last 30-40 dry cleanings. Coverage per gallon Carpet
Low Pile
Drapery
1200-2400 sq. feet
Light Weight
1500-3000 sq. feet
Medium Pile 1000-2000 sq. feet
Medium Weight
1150-2300 sq. feet
Heavy Weight
800-1600 sq. feet
High Pile
800-1600 sq. feet
UpholsteryOne pint (16oz) covers an average 6 foot sofa
Why is oil repellency important? At one time or another our carpet or fabrics come in direct contact with oils, whether it’s oil from our shoes, cooking oil from our stoves, or body oil from our skin. NANOSKIN FABRIC is formulated to repel oil helping to keep the fabric cleaner for a longer period of time. We believe, as some industry and university studies indicate that silicone treatments can cause the fabric or carpet to re-soil at a much faster rate. Why is UV absorber important? As you can see when the wave lengths reach the point that they become visible light (around 380). The absorbers do not modify (absorb) them or it would cause the light to be a different color. It is very important not to block the light or the colors of the carpet / fabric or it would appear different then its intended color. For example, instead of a sofa looking green it may in fact look light blue.
UV Scan
• • • •
Harmful UV rays are in the 250 - 350nm range. As you can see from the graph, we're showing absorption from the 190 to 370nm range as noted by the red line. This test was run with a 1% solution of FABRIC with UV absorber. The reason we could not run it with 100% product is because it absorbed so much that it would be off the top of the chart and you wouldn't be able to see anything but a flat line across the top of the chart.
LIQUID IRON Wrinkle Release • • • •
Relaxes fibers Allows for wrinkle to be easily smoothed away Ideal for heat-sensitive fabrics where cool ironing is recommended Anti-static spray & fabric softener
LIQUID IRON Wrinkle Release is a water-based fabric treatment that is effective in reducing wrinkles in most fabrics. This pH neutral, color safe treatment can be sprayed on casual clothes for hang drying to reduce wrinkles, or can be applied during ironing to give clothing a pressed appearance without being stiffened by starch. Directions: Use before or after drying. Water sensitive fabrics (such as silk or rayon) should be tested first in an inconspicuous area. To effect less wrinkling on fabrics in the drying cycle, spray fabrics as they are transferred from the washer. In Hang Drying ApplicationSimply hold the fabric no more than 1 foot from the spray applicator, and apply lightly with a sweeping motion to the wrinkled area. Use more spray for heavy fabrics or severe wrinkling. For Severe WrinklingSome smoothing of the fabric by hand or with a cold iron will remove wrinkles faster and more effectively. Fabrics which have been dried and show wrinkling can be treated and dried at low heat to remove wrinkles quickly and completely.
16oz
Paint Protection Glass Protection Wheel Protection Leather, Vinyl, Rubber, Tire & Plastic Protection Fabric & Carpet Protection Cleaners, Degreasers, Shampoo, Scents, Maintenance Polishes Solvents
BUBBLE BATH Hydrophobic Shampoo • • • • • • •
Super-concentrated Dilution 127 : 1 Added hydrophobic polymer protection Relentless water beading Extremely slick Nice glossy finish Will not strip wax
NANOSKIN BUBBLE BATH is a super concentrated wash solution for all type of paint finishes. Its hydrophobic polymer formula lubricates the surface, deepens gloss and leaves a highly water repellent surface. BUBBLE BATH will not remove wax, yet easily washes away all traces of grease, dirt and grit that have accumulated since your last wax. BUBBLE BATH works extremely well at cutting through road salt and winter grime. General dilution is 1 ounce per gallon of water. Directions: 1. Mix 1 oz per gallon of water. 2. Rinse surface with water to flush away loose dirt. 3. Wash and rinse in sections. 4. Begin with the roof, and work the suds down to the hood, trunk and sides. 5. Rinse with clean water. 6. Dry with clean and soft towels. For Automatic Car Wash Systems1. Dilute 1 gallon of BB to 10 gallons of water. 2. Adjust metering system for maximum foam and cleaning performance.
16oz, 1Gal
GREASE FREE Glass Sealant •
Water-based formula
•
Cleans engines, trunks, door jams, wheels, tire and rims
•
Safe for most under-the-hood rubber and plastic parts
GREASE FREE is a concentrated water base power cleaner and degreaser. It dilutes with water and cleans a variety of surfaces. For engines and greasy door jams, dilute one part of GF with three parts of water. For medium duty degreasing, dilute one part of GF with nine parts of water. For general cleaning, dewaxing or other light duty work, dilute one part of GF with nineteen parts of water. Safe for most under-the-hood rubber and plastic parts. Great for stubborn spots and stains. Dilutions: Heavy Duty Degreasing Medium Duty Degreasing General Cleaning, Dewaxing
3:1 9:1 19 : 1
Directions: 1. Dilute with water to designed strength. 2. Spray or wipe on surface. 3. Brush or wipe as needed. 4. Rinse surface with water.
16oz, 1Gal
BRIGHT Wheel, Tire & Metal Cleaner • • • • •
Removes grease, road grime, light oxidation and brake dust Safe on all types of tires and wheels Non-corrosive to skin and metal Removes water spots, safe for glass & paint No guess work anymore
BRIGHT is a low Ph organic salt that performs like an acid. It is non-corrosive to skin and metal per DOT/TDG test protocol, non-fuming and is DOT “NonRegulated”. BRIGHT safely removes grease, road grime, light oxidation, and brake dust from metal, paint and other hard surfaces. Safe on all types of wheels including clear coated, painted, aluminum, polished and anodized. Great for removing water spots. New technology chemically embraces and lifts mineral deposits and protect surface from future water spots. NOTE: BRIGHT can be used to replace HCL acid in many applications and offers significant performance advantages vs. acids such as phosphoric, citric, hydroxyacetic, sulfamic, oxalic, etc. with regards to removal of calcium, lime and rust. Dilutions: Wheels & Rims 9:1 Water Spot Remover 9:1 Diamond Plate 9:1 Car & Truck Washing 250 : 1 Directions: 1. Eye protection is recommended. 2. Test an inconspicuous spot for surface compatibility. 3. Spray even on cool, dry surface. 4. Allow to soak for 1 to 4 minutes. 5. For extremely dirty wheels and tires, agitate with a soft brush or sponge. 6. Stand away from surface and hose off thoroughly with strongly water spray. 7. Dry surface immediately with a clean, soft towel to prevent water spots.
16oz, 1Gal
CRYSTAL-CLEAR VOC Free Glass Cleaner • • • • •
VOC Free Contains no harmful or harsh chemicals, including ammonia or alcohol Uses an ultra-fine polishing agent No streaks, no smears Safe for glass, ceramics, stainless steel, acrylics, paint surfaces, polystyrene, ABS and polycarbonate
CRYSTAL-CLEAR highly concentrated VOC Free Glass Cleaner contains no harmful or harsh chemicals, including ammonia or alcohol that damages your car or the environment. By using an ultra-fine polishing agent, it gently removes dirt and grime from glass and clear plastic by polishing it away. The final result is a polished finish without streaks or smears. Safe for use on glass, ceramics, stainless steel, acrylics, paint surfaces, polystyrene, ABS and polycarbonate. Dilution: 40 : 1 Directions: 1. Dilute with water to designed strength. 2. Spray or wipe on surface. 3. Wipe with a clean dry towel or glass towel for a sparkling clean surface. TIPS: All glass cleaners are sensitive to dirty towels. So, if you use a towel that's previously been used for polishing or waxing, remaining product residue is bound to leach out and smear your glass. Dedicated glass towels are your best bet.
16oz, 1Gal
UPHOLSTERY Interior Cleaner & Shampoo • • • • • • •
Superior anti-stain, anti-resoiling properties Helps to keep the surfaces cleaner and stain free longer Removes oil, grease, dirt, blood, wine, coffee and most substances Cleans soil and spots without removing the natural sheen of any fine finish May also be used on automotive trunk or home carpet Environmental friendly Biodegradable
UPHOLSTERY Interior Cleaner and Shampoo cleans all interior surfaces without harmful effects. Specially designed for today’s surfaces, UPHOLSTERY offers superior anti-stain, anti-resoiling properties helping to keep the surfaces cleaner and stain free longer. It removes oil, grease, dirt and most substances that stain all automotive interior surfaces, trunk or home carpet. Using unique cleaning technology, the best part is that the carpet or fabric will not be altered after cleaning. Dilutions: Pre-Spray 15 : 1 (8oz per gallon) Extraction Cleaner 63 : 1 (2oz per gallon) Spot Remover 7 : 1 (16oz per gallon) Hard Surface Cleaner 127 : 1 (1oz per gallon) Directions: Dilute with water to designed strength. 1. Remove all loose dirt by vacuuming. 2. Apply UPHOLSTERY and agitate. 3. Use a carpet cleaning brush for stubborn spots. 3. Wipe with clean dry towels or vacuum with a WET/DRY vacuum. 4.Allow to air dry.
16oz, 1Gal
When you see the DfE label on a product, what does it mean? • EPA allows safer products to carry the Design for the Environment (DfE) label. This mark allows consumers to quickly identify and choose products that can help protect the environment and are safer for families. • When you see the DfE logo on a product it means that the DfE scientific review team has screened each ingredient for potential human health and environmental effects and that-based on currently available information, EPA predictive models, and expert judgment-the product contains only those ingredients that pose the least concern among chemicals in their class. • Product manufacturers who become DfE partners, and earn the right to display the DfE logo on recognized products, have invested heavily in research, development and reformulation, to ensure that their ingredients and finished product line up on the green end of the health and environmental spectrum, while maintaining or improving product performance. • EPA's Design for the Environment Program (DfE) has allowed use of their logo on over 2000 products. These products are formulated from the safest possible ingredients and have reduced the use of "chemicals of concern" by hundreds of millions of pounds.
How do I know products bearing the DfE label are really safer? â&#x20AC;˘ Looking carefully at product ingredients DfE starts with information that scientists already know about each ingredient such as how it works in a detergent, and how it affects living things. Where that information doesn't tell the full story, EPA looks at an ingredient's chemical structure - its components and shape - to understand how it could impact the environment and people. A chemical's structure can tell a lot about how the chemical will behave and what types of effects it may have when it comes in contact with people or the environment. DfE uses the special skills of the scientists at EPA who have studied chemicals for 30 years or even longer. â&#x20AC;˘ Allowing logo for best in class products only DfE compares an ingredient's characteristics to other chemicals in the same class. That is, solvents are compared to other solvents, and wetting agents (surfactants) are compared with other surfactants. Before DfE allows the logo on a product, DfE makes sure that only the safest ingredients from each class are used.
â&#x20AC;˘ Protecting your family and the environment When you use a cleaning product, it is released into the environment-inside your home and down the drain to the outdoors. Adults come in contact with cleaning products on a regular basis, as do children who are often the most exposed when they crawl on the floor. Some consumers may prefer cleaning products that, for example, are inherently safer or do not irritate sensitive skin. Others may prefer products that break down quickly and do not harm fish or are safer for use around family pets. The DfE logo is an easy way to know you are choosing a product that is as safe as possible for people and the environment. â&#x20AC;˘ Expect the safest possible ingredients When the DfE logo appears on a product, it means that the DfE review team has screened each ingredient in the product for potential human health and environmental effects and that--based on hazard and risk information, the latest models and predictive tools, and expert scientific judgment--the product contains only those ingredients that pose the least concern among chemicals in their class. For example, if a DfE-recognized product contains a surfactant, then that surfactant will not be toxic to human health and it will biodegrade readily to non-polluting degradation products; many surfactants in conventional products biodegrade slowly or biodegrade to more toxic and persistent chemicals, which threaten aquatic life.
â&#x20AC;˘ DfE formulator review is especially discriminating and protective The DfE Program is unique because of two defining characteristics: its assessment methodology and its technical review team. The DfE technical review team has many years of experience and is highly skilled at assessing chemical hazards, applying predictive tools, and identifying safer substitutes for chemicals of concern. The review team applies the DfE assessment methodology by carefully reviewing every product ingredient (The review includes all chemicals, including those in proprietary raw material blends, which manufacturers share with DfE in confidentiality).
SMOOTH Instant Detail Spray • • • • • •
Missing link between washing and waxing Restores the brilliance of a showroom finish A clay lubricant Can be used on glass, chrome, and plastic Enhance reflections on shiny materials Home, office, boat, auto, and many other applications
If you’re looking for a missing link between washing and waxing, spray on NANOSKIN SMOOTH. It removes minor contaminants, dust, fingerprints, bugs, and more, restoring the brilliance of a showroom finish. As a good friend of clay bar, SMOOTH lubricates the paint so well while rubbing the clay back and forth. It can also be used on glass, chrome, and plastic. The spray dries crystal clear on any surface and enhances reflections on shiny materials, like chrome wheels and trim. It’s so easy and you can detail a full size car in less than 10 minutes. Directions: 1. Shake well. Use only on clean, cool paint and out of direct sunlight. 2. Mist SMOOTH onto one section at a time. 3. Quickly spread product with clean dry microfiber towel. 4. Turn to a dry portion of the towel, then wipe dry.
16oz
WATERLESS Waterless Wash • • • • • •
Spray, wipe, shine, protect Water-based & enviro-friendly Removes bugs, dirt, road grime & contaminants Designed for paint, glass, chrome & plastic Works well at cutting through road salt and winter grime Home, office, boat, auto, and many other applications
WATERLESS is a water-based, enviro-friendly blend of wetting agents, emulsifiers and protectants. It emulsifiers, lifts and remove bugs, dirt and light to medium surface contaminants. Not for excessively soiled, muddy or caked on dirt. Designed for all exterior surfaces. Works on all paint, metal, plastic, chrome and glass. Does not smear or streak. Perfect shine in seconds. Directions: 1. Spray on surface and let set for 10 seconds. 2. Wipe off with a clean, dry terry cloth or microfiber. 3. For difficult spots, repeat and let soak on surface longer to work, then wipe off. 4. When towels are soiled, use a clean towel.
16oz
SILVER BULLET All Metal Cleaner & Polish •
Restores mirror bright shine of all types of metals in seconds
•
Wheels - Rims – Chrome – Diamond Plate
•
Cleans plastic headlights
•
Safe for painted surfaces.
SILVER BULLET is the perfect all metal cleaner & polish. It removes minor scratches and dullness. It restores the sparkle and shine to Aluminum, Brass, Chrome, Copper, Gold, Magnesium, Pewter, Silver, and Stainless Steel. SILVER BULLET cleans plastic headlights and restores the clear, bright appearance. Safe for painted surfaces. Directions: 1. Shake well before using. 2. Apply a small amount on a soft cloth and rub on surface until it becomes black. 3. Buff of polish residue to an amazing Silver Bullet shine. 4. Repeat if necessary on badly tarnished or oxidized surfaces.
16oz
ESSENCE Odor & Stain Eliminator • • • • • •
Deodorizes bad odors, not an odor mask Removes stains caused by pet urines, wine and some yellow stains Provides anti-resoiling protection Safe on wool Wide variety of applications Home, office, boat, auto, and many other applications
ESSENCE is not only an odor eliminator but also a stain remover. It deodorizes bad odors caused by spilled milk souring, smoke lingering, or pet odors, not an odor mask or cover, and it’s Safe on Wool. ESSENCE also removes stains caused by pet urine, perfume, wine and some yellow stains. Apply directly to stains as soon as possible to help prevent permanent damage to carpet or fabric dyes. Directions: Odors are primarily trapped in fibers, so apply to carpets, upholstery and other fabric surfaces. For Odor1. Spray light coat evenly over affected areas until surface is damp. Do not saturate. 2. Allow product to penetrate and self-dry, no rubbing required. For Stain1. Mist Essence onto the surface. 2. Blot with absorbent toweling. 3. Flush with water if necessary.
16oz
Paint Protection Glass Protection Wheel Protection Leather, Vinyl, Rubber, Tire & Plastic Protection Fabric & Carpet Protection Cleaners, Degreasers, Shampoo, Scents, Maintenance Polishes Solvents
HD CUT HD Rubbing Compound • • •
Removes 1000 to 1500 sanding marks Prepares surfaces for wax or glaze Contains no wax or silicone
NANOSKIN HD CUT is a super fast acting compound that removes 1000 to 1500 grit sanding marks, heavy oxidation, and other serious paint imperfections and defects from all types automotive paint surfaces. It contains no silicone, no wax, and no fillers. Directions: Shake well. Apply to a cool surface. Hand1. Apply a small amount on a clean, soft cloth. 2. Rub on surface using light pressure to desired finish. 3. Wipe off excess with a clean, soft cloth or micro fiber towel. Machine1. Apply to buffing pad and biff with light to medium pressure to desired finish. 2. Wipe off excess with a clean, soft cloth or microfiber towel.
16oz, 1Gal
FIRST CUT Polishing Compound • • •
Removes sanding marks and paint defects Contains no silicone, wax, or fillers Safe for all paints
NANOSKIN FIRST CUT is the first step compound to remove sanding marks, oxidation, and paint defects from all automotive paints. It's unique combination of diminishing gentle abrasives, fine polishing powders, and chemical cleaning agents, deliver a low dust application. The perfect first step set up for NANOSKIN COMPOLISH Ultra Fine Polishing compound. It contains no silicone, no wax, and no fillers. Directions: Shake well. Use only on clean, cool paint and out of direct sunlight. Hand1. Apply a small amount to a soft cloth and rub on the surface until the scratches are removed. 2. Wipe off residue and apply wax or glaze. Rotary Polisher1. Apply a small amount to the surface. 2. Buff with a wool or foam pad at low rpm. 3. Slightly tilt up the pad and buff from side to side to remove scratches. 4. Wipe off residue and apply wax or glaze. DA or Orbital Polisher1. Apply a small amount to the surface and polish until swirls are removed. 2. Wipe off residue and apply wax or glaze.
16oz, 1Gal
COMPOLISH Ultra Fine Polishing Compound • • •
The enemy of swirls Safe for all paints Prepares surface for waxing or glazing
NANOSKIN COMPOLISH is an ultra fine polishing compound designed to remove minor scratches, swirls, spider webs and light oxidation. By simply using COMPOLISH with 2 pads – Wool polishing pad & Euro foam cutting pad, the paint will be completely swirl and hologram free. It leaves low dust and produces a brilliant high gloss finish. A perfect follow up to NANOSKIN FIRST CUT. The combination of FIRST CUT and COMPOLISH should be all you need for most paint corrections. It contains no silicone, no wax, and no fillers. Directions: Shake well. Use only on clean, cool paint and out of direct sunlight. Hand1. Apply a small amount to a soft cloth and rub on the surface until the scratches are removed. 2. Wipe off residue and apply wax or glaze. Rotary Polisher1. Apply a small amount to the surface. 2. Buff with a wool or foam pad at low rpm. 3. Slightly tilt up the pad and buff from side to side to remove scratches. 4. Wipe off residue and apply wax or glaze. DA or Orbital Polisher1. Apply a small amount to the surface and polish until swirls are removed. 2. Wipe off residue and apply wax or glaze.
16oz, 1Gal
HI GLAZE High-Endurance Glaze • • •
See the difference Feel the shine Perfect for all colors and all paints
NANOSKIN HI GLAZE is our top of the line high gloss paint glaze. It is a long lasting and detergent resistant protectant. It's perfect for all colors and all paints. On dark colors, the depth of the shine and wet gloss reflections will amaze you. It's easy application and low dust removal make it a number one choice for professional detailers. Works in the sun. Directions: Shake well before using. Hand1. Apply a small amount to a dry wax applicator sponge. 2. Wipe on surface and let dry to a light haze. Wipe off residue with a clean dry towel or clean dry micro fiber. Machine1. Apply a small amount product to surface and buff with a foam polishing pad to a brilliant shine. 2. Wipe off residue with a clean dry soft towel or clean dry micro fiber.
16oz, 1Gal
Paint Protection Glass Protection Wheel Protection
Leather, Vinyl, Rubber, Tire & Plastic Protection Fabric & Carpet Protection Cleaners, Degreasers, Shampoo, Scents, Maintenance Polishes Solvents
TAR SOLVENT Tar & Grease Remover • • •
Removes tar and adhesive trim marks Safe to use on all paints and trim Small amount required to remove spots
When oil based, greasy, sticky stains happen, NANOSKIN TGR Tar and Grease Remover is the answer. This special blend of solvents will remove most oily stains with ease. In addition to gum, tar, and grease, this stain remover is excellent on crayon, lipstick, shoe polish, wax, inks, adhesives, glues and many other oil based stains. Directions: Test surface compatibility on an inconspicuous area before using. 1. Lightly moisten a clean cloth. 2. Lightly rub surface to remove undesirable coating. 3. Not recommended for freshly painted surfaces. 4. Do not use on plastic.
16oz, 1Gal