In-Vehicle Computer 2015

Acrosserâ&#x20AC;&#x2122;s In-Vehicle Computer products include in-vehicle computers, touch monitors and UPS Back-up power. All these products are designed for in-vehicle applications such as infotainment, fleet management, telematics, video surveillance, taxi dispatch and law enforcement.

The challenging electrical and environment conditions found in modern automobile have a strong impact on the design of automotive power electronic equipment. Important factors affecting the design of electronics for this application include static and transient voltage ranges, electromagnetic interference and compatibility requirements (EMI/EMC). The transients on the automobile power supply range form the severe, high energy, transients generated by the alternator/regulator system to the low-level "noise" generated by the ignition system and various accessories. A standard automotive electrical system has all of these elements necessary to generate undesirable transients. The Society of Automotive Engineers (SAE) has defined the automotive power supply transients which are present in the system. With the extensive use of computer in today's vehicles, protection from transient over voltages is essential to ensure reliable operation.

All in-vehicle computer power subsystem is designed with protections to prevent damage from most of the transient over voltage in vehicles. 1. Automotive Transient Voltage Suppression 2. Power On Delay to Skip Cold Crank 3. Over Voltage and Under Voltage Protection 4. Over Current Protection 5. Reverse Voltage Protection 6. Automotive Fuse

Acrosser ensure its In-Vehicle Computers perform as designed during and after exposure to disturbance by certified with the E-Mark. E/e-Mark is the Economic Commission of Europe (ECE) that grants certificates to ensure all automobiles equipments sold by manufacturers meet traffic safety and environmental protection requirements. The E-Mark certification includes a series of vehicle transient voltage test according to the ISO 7637-2. ISO 7637-2 was prepared by Technical Committee ISO/TC 22, Road vehicles. It defined specifies bench tests for testing the compatibility to conducted electrical transients of equipment installed on passenger cars and light commercial vehicles fitted with a 12V electrical system or commercial vehicles fitted with a 24V electrical system â&#x20AC;&#x201D; for both injection and the measurement of transients. There are 8 types of test pulse defined to simulate different transient voltage in real vehicle environments.

When designing an in-vehicle Computer, there are a lot of challenges that system integrators might experience due to the harsh in-vehicle environment and the real on-field applications, especially for the power management. Acrosser designed the comprehensive intelligent power management subsystem solution for the in-vehicle Computer to conquer all the challenges and provides the advanced features to benefit the in-vehicle application.

In general, there is 12V or 24V battery in use for vehicle. Acrosser power management subsystem will take wide range power input to support both kinds of batteries. And there might be a random surge or unstable power output from the battery during operation that the wide range input feature can protect the system from unstable surge as well.

Acrosser in-vehicle computers have low voltage protection to monitor main battery. Customers can set the low voltage value by their cars' status. When battery voltage is lower than preset value, Acrosser smart system will shut down to reserve sufficient power for car use.

When the system power on/off mode is controlled by the car ignition, it's impossible to turn off the ignition and turn it back on just to restart the in-vehicle computer. Hence, Acrosser power management subsystem will automatically detect and monitor the system status and auto retry if system did not boot-up.

Without worrying about the hardware configuration or software programming, Acrosser implements a user friendly interface for user to easily define and customize the power delay time and the system power on/off control mode. Application program can also change the parameters through APIs provided in software development kit.

Some applications might not attach a display to the in-vehicle Computer, so it becomes difficult to know the system status of the Computer and to diagnose if any problem happened. Hence Acrosser builds in a system status LED to indicate the current system status, such as in operation, in power delay, in standby or in system off status.

To consider the reality that user may need to synchronize or upload data from in-vehicle Computer to the control center after vehicle ignition is off. The power delay control allows user to operate the in-vehicle Computer after the ignition is off for a period of time and then properly shut down the Computer automatically.

Solid R&D Capacity, Continuous Innovation The performance-based Acrosser’s In-Vehicle Computers are winners of 2 Ministry of Economic Affairs (MOEA) Awards: •” Taiwan Excellence Award ” held by Taiwan External Trade Development Council (TAITRA) •” Taiwan Excellent 100 on ITS/Telematics Award ” by Telematics Promotion Office

AR-V6005FL Fanless and Dustproof Intel Atom E640 In-Vehicle Computer

AR-V6100FL Fanless and Dustproof Intel 2nd Generation Core i In-Vehicle Computer

â&#x20AC;˘Service truck for Telecom Carrier â&#x20AC;˘In-Vehicle Computer works as a control center for multi-function systems on mobile workstation vehicle.

AIV-HM76V0FL

s

Model No.

AIV-HM76V0FL

AR-V6100FL

AR-V6005FL

AR-V6002FL

Specification CPU

Intel Core i7 3720QM / i5 3610ME / i5 3360M / i3 3120ME

Intel Core i7 / i5 / Celeron B810

Intel Atom E640

Intel Atom D525 / D425

Memory

2 x DDR3 SO-DIMM, Pre-install 2GB, Max. 16GB

2 x DDR3 SO-DIMM, Pre-install 2GB, Max. 8GB

OnBoard DDR2, Pre-install 2GB

1 x DDR3 SO-DIMM, Pre-install 1GB, Max. 4GB

1 x HDMI type A connector 1 x Combo connector 1 x DVI-D connector

1 x Combo connector 1 x DVI connector

1 x VGA port

Video Video Interface All-in-one A/ V connector

Yes

No

Storage SATA

2 x SATA III port

1 x SATAII port

2 x SATA II port

CF

1 x External CF socket

Disk Bay

1 x Anti-shock 2.5" HDD Bay with easy swappable bracket

Expansion Slot

2 x Mini PCIe

Ethernet

2 x Gbps LAN

1 x Gbps LAN

Serial Port

1 x RS232 1 x RS232/422/485

2 x RS232 1 x RS232/422/485

2 x RS232 2 x RS232/422/485

USB

4 x USB 3.0 1 x USB 2.0 (Combo)

4 x USB 2.0 1 x USB 2.0 (Combo)

1 x USB 2.0 1 x USB 2.0 (Combo)

4 x USB 2.0

GPIO

4 In, 4 Out

Audio

1 x MIC in, 1 x Audio out

Remote Control 1 x Remote control switch

1 x Remote control switch

SIM

1 x External SIM Slot

I/O

1 x External SIM Slot

Can Bus iButton

Yes 1-Wire interface

Yes

1-Wire interface

-

Power Reqirment Power Input

DC 9V ~ 32V

Power Output

DC 12V (Combo)

-

Windows 7 / Windows XP / Fedora 14 / Ubuntu 10

Fedora 14 / Ubuntu 10

Windows XP / XPE / Linux Fedora 12

Software OS Support

Mechanical & Environment Dimension

310 x 195 x 80 mm

294 x 128 x 68 mm

280 x 181.5 x 76.8 mm

Weight

6 Kg

2.4 Kg

2.7 Kg

0 ~ 60°C (32 ~ 140°F)

0 ~ 50°C (32 ~122°F)

Operating Temp 0 ~ 60°C (32 ~ 140°F) Reliability

Comply IEC 60068-2-64 / Comply IEC 60068-2-27 / CE, FCC Class B, E-Mark 13

Optional Wireless Module WWAN Others

3.5G / 4G, (GPRS / EDGE / WCDMA / HSDPA / HSUPA / LTE) GPS, IEEE 802.11 b / g / n (AR-V5403:IEEE 802.11 b / g), Bluetooth

Model No.

AR-DP071VW

AR-DP080V

AR-DP080VW

AR-DP100VW

AR-DP100V

Picture

In-Vehicle Monitors

Panel Size

7” Wide Screen (16:9)

8” Screen (4:3)

8” Wide Screen (16:9)

10.2” Wide Screen (16:9)

10.4” Screen (4:3)

Resolution

640 x 480 pixels ~1920 x 1080 pixels

640 x 480 pixels ~1024 x 768 pixels

Luminance

400 nits (cd /m2)

600 nits (cd /m2)

500 nits (cd /m2)

400 nits (cd /m2)

300 nits (cd /m2)

View Angle(T/B/L/R)

50 / 70 / 70 / 70 deg.

40 / 60 / 60 / 60 deg.

50 / 70 / 70 / 70 deg.

50 / 60 / 75 / 75 deg.

Backlight Lifetime

20,000 hours

30,000 hours

LED

Operating Temp

-30 ~ 85oC

-10 ~ 60oC

-30 ~ 85oC

-10 ~ 60oC

Power Consumption

12W

7.2W

12W

I / O Combo cable (One-to-Video / TouchScreen / Audio / DC interface)

Video

VGA(DB15)+3 Video Inputs

4-Wire Resistive USB interface

Touch Screen

3.5mm stereo jack

Audio DC

DC jack(12V ~ 24V)

Acrosser Headquarters

Acrosser Taichung Office

Acrosser USA Inc.

241㖗⋾ⷩᷰ憴⌧ℰ⾐巖ᷧ㮜61ⷞ26噆10㧺 10F., No.26, Ln. 61, Sec. 1, Guangfu Rd., Sanchong Dist., New Taipei City 241, Taiwan, R.O.C. TEL: +886-2-29999000 FAX: +886-2-29992887

408⏗Ḕⷩ⌾ⱖ⌧㲚⌾巖⛂㮜162噆12㧺Ḳ6 12F.-6, No.162, Sec. 4, Henan Rd., Nantun Dist., Taichung City 408, Taiwan, R.O.C. TEL: +886-4-22510659 FAX: +886-4-22546079

11235 Knott Ave. Suite A, Cypress, CA 90630, USA Toll Free: +1-866-401-9463 TEL: +1-714-903-1760 FAX: +1-714-903-5629

Acrosser China Subsidiary

Acrosser Shanghai Office

Acrosser Beijing Office

㲯◱Ⳁ㧡ㄪ廘䏳⨎㗇攎‪⊶ 㷘✚ⷩ䥶䔗⌡彍⅓⺀㳗䄝Ṅ巖21⏞䙮ↇ䦸㉧⛔3㟲2㥣 (悕份:518040) 2F., 3rd Building, Crown Science Park, No. 21, Tai-Ran 9th Rd., Che Gong Miao, Futian Dist., Shenzhen, China (Postal:518040) TEL: +86-755-83542210 FAX: +86-755-83700087

㧡ㄪ廘䏳⨎㗇攎‪⊶ ᳈㰵⃄‪⊶ ᷱ㵞ⷩ⽷㰮⌡曝晜巖631⏞䈘ḷ⤎⎍12E (悕份:200085) 12E, Aile Building, No.631, Ling-ling Rd., Xu-Hui Dist., Shanghai, China (Postal:200085) TEL: +86-21-64288853 FAX: +86-21-64288854

㧡ㄪ廘䏳⨎㗇攎‪⊶ ⇕ᵪ⃄‪⊶ ⋾ẓⷩ㵞㶧⌡⭰⭨⹫奦ᷰ㝈9⏞⮃⒨ᷱⰩ2-703 (悕份:100085) Room 2-703, Yipinshangceng, No.9, Xisantiao, Anning Zhuang, Haidian Dist., Beijing, China (Postal:100085) TEL: +86-10-82359009 FAX: +86-10-82359003

Turn static files into dynamic content formats.

Create a flipbook