PARKHELP On/Street CONTROL SERIES
LOADING USAGE
Parking control bollard for loading spaces, with or without identification.
Parking control for limited time loading spaces.
FEATURES Timed control up to 8 parking spaces. 360º High visibility LED’s to show parking status: allowed(green), near the limit (green blinking) and time exceeded (red). Adjustable parking time. User friendly interface: Graphic display to control space by space countdown or time exceeded, trough a unique button. With RFid Identification (optional): It makes it possible to remotely know which vehicle exceeded parking time, allowing remotely fine them or charge for parking time, without the need of controllers. Compatible with ParkHelp On Street sensors. Wireless technology without civil works. Connection to central server via GPRS / EDGE. PDA software compatible. 110/220V, 50/60Hz Powered.
OPERATION WITHOUT IDENTIFICATION: Vehicle arrives and parks in a free spot. A countdown starts on the bollard graphic display. Green light in the bollard. Green blinking light when reaching the time limit. When time limit is exceeded, the bollard turns red and communicate the traffic violation to the central server. When driver leaves the parking space, the status is reset and the cycle starts again. WITH IDENTIFICATION: Vehicle arrives and parks in a free spot. A countdown starts waiting for a RFid identification. The bollard indicates blinking green. If there is no identification, the bollard turns red and alerts the control center. When driver identifies himself, a fixed green light is set. When time limit is exceeded, the bollard turns red and communicate the traffic violation to the central server. When driver leaves the parking space, the status is reset and the cycle starts again.
PARKHELP PRESENCE IN MORE THAN 42 COUNTRIES
Mobility & Sustainability Solutions
PARKHELP Off/Street CONTROL SERIES
LOADING
TECHNICAL FEATURES Electrical characteristics
Range
Units
Frequency Vac Power consumption
50/60 110-264 20
Hz V W
GPRS
Range
Units
Frequency Sensitivity Maximum TX power Mode Coding Protocol Channel
850/900/1800/1900 MHz -110 (Typical) dB Class 4 2W @850/900 MHz Class 1 1W @1800/1900 MHz Class B, Multislot 10 CS1-CS4 GSM/GPRS Release 97, AMR Release 99 PBCCH/PCCCH
Environmental specifications Temperature range
Range -10 to +50
Units ยบC
Mechanical specifications Weight Base lenght MHousing material Material base IP Grade
Rango 20,1 114 RIM & Policarbonate Steel 65
Unidades Kg cm
Installation
Dimensions D 240 mm 1200 mm
1405 mm
850 mm
600 mm 150 mm
Mobility & Sustainability Solutions www.parkhelp.com
PARKHELP is registered trademark. The manufacturer reserves the right to change specifications without prior warning.
IP