REF. 05170 and 05172
PARKHELP PILOT LIGHT Off/Street APPLICATION
PARKINGS INDOOR
DEVICE FEATURES The purpose of the Light is to visually indicate if parking spaces are available or not to customers. This helps to identify the status of parking spaces from a given distance without having to drive down alleys. Lights are located over each one of the parking spaces (on the outside of the space) through a simple and quick installation. The Light control plate includes a 4-way RJ-11 connector to communicate with the sensor, and 8 green or blue LEDs plus 6 red LEDs. These high luminosity LEDs provide a good relation between luminosity and consumption. The sensor is responsible for managing luminosity and switching on or off the various LEDs. This management also allows using a methodology to optimize the electrical of the LEDs. The system operator can switch off or on the light LEDs to indicate the space is closed (LEDs off) or reserved (red LEDs on, even when the sensor detects there are no vehicles occupying the space).
PARKHELP PRESENCE IN MORE THAN 42 COUNTRIES
Mobility & Sustainability Solutions
PARKHELP
APPLICATIONS
PILOT LIGHT Off/Street
PARKINGS INDOOR
LIGHTS INDICATORS The light includes four groups of luminous indicators (LEDs): Red / Green LEDs If the spaces are destined for whole people. Red / Blue LEDs If the spaces are destined for people with desabilities. Red / Purple LEDs If the spaces are destined for expectants mothers o for pregnants women. Red / Orange LEDs If the spaces are destined for family cars.
FAST INSTALLATION A series of interconnected pieces are used for installation over the parking space. This way it is possible to install the Light without requiring screws or tools simply and fast.
We recommend the Light is installer in the outermost part of the parking space. The proper orientation of the LEDs should also be considered. This ensures optimal visibility by drivers in the car park seeking an available space.
TECHNICAL FEATURES Screw-free installation thanks to the ParkHelp installation device (using aluminium ducting). Size of the external box: 84 mm x 84 mm x 85 mm. Typical consumption: from 0 to 60 mA (adjustable). Power supply: Modulated by PWM of +5 V DC. Connection from sensor and Light through standard patch cord connected to RJ-11 ports (Control green LEDs, control red LEDs, GND, GND). It can stand from 30 degrees below zero to 60 degrees centigrades.
Mobility & Sustainability Solutions www.parkhelp.com
PARKHELP is registered trademark. The manufacturer reserves the right to change specifications without prior warning.
The parts fit directly to aluminium ducts installed on the ceiling. The electronic plate is placed after positioning the base of the part and the bus and communications cables are connected (power + data) to the corresponding sensor. Finally, the corresponding covers are placed to close and secure the parts.