Aquanova Rising Baths Pre-Installation Instructions 10mm minimum (edge of bath to wall) 230mm from the edge of the bath
10mm minimum (edge of bath to wall)
Centreline of Bath
Through Floor - Right Hand Bath
10mm minimum (edge of bath to wall)
230mm from the edge of the bath
10mm minimum (edge of bath to wall)
Centreline of Bath
Through Floor - Left Hand Bath
Optional - only needed for whirlpool baths. 20mm IP65 rated cable outlet wired to a 5 amp fused spur at high level outside the bathroom (13 amp fuse for whirlpool). 450mm
Fig. 1
Electrical Connections
Technical Details - All Aquanova baths rise full of water 1550mm
750mm
550mm 585mm
1700mm
400mm
1700mm
Fig. 2
Fig. 3
a
b 750mm
1700mm
Fig. 4
Fig. 5
Manifold Dimensions 170 x 50mm
Note: It is the responsibility of the client to determine the location of the bath in relation to the walls adjacent to the bath (a & b) in Fig. 4 Internal tub length Internal tub width Internal tub depth Transfer height (lowest position) Height of lift
1550 550 400 585 350
Fill volume
200 litres
Filling time Raising time
4.2 mins @ 0.5 bar pressure 18 seconds
Lowering time Maximum floor loading
12 seconds 400Kgs (equivalent to 1.56Kg/sq cm)
Electrical Water
24volt battery operation (automatic charging) 22mm steel braided flexible hose with BSP swivel ends
Abacus Healthcare Services Ltd, Unit 1 Millennium Way, High Carr Business Park, Newcastle-under-Lyme, ST5 7XE Tel: 01782 569330 www.abacushealthcare.co.uk P1 / SBAQ1-9 - issue 9 - 01.04.11
Fax: 01782 569349
e-mail: service@abacushealthcare.co.uk