CAMON STUMP GRINDER MODEL C500 PARTS DIAGRAM Tracmaster Ltd, Teknol House, Victoria Road, Burgess Hill RH15 9LH. T: 0870 224 0369 F: 01444 871612 E: spares@tracmaster.co.uk C500/0105
WHEEL & BRAKE ASSEMBLY
Left side shown, right side opposite
C500
Diag No
Part No
Description
1 2 3 4 5 6 7 8 9
10749 761779 761585 10795 761581 724508 722103 762266 761671 761680 10419
Main Frame Weldment Collar - Clamp 3/4” Brake Mechanism (left side only) Wheel Weld. Brake (left side only) Bearing - Wheel Nut Lock 1/4”-20 Nylock Bolt - Hex 1/4”-20 x 3/4” GR8 Wheel,Three Piece 6” Tyre - 4.10 x 6 x 12.8 Dia. (left side not shown) Tube - 4-10-6 (not shown) Brake Cable Assembly (left side only)
10
Qty 1 2 1 1 4 1 1 2 2 2 1
NOTE: Quantities shown are for two-wheel assemblies
Teknol House,Victoria Road, Burgess Hill RH15 9LH. T: 0870 224 0369 F: 01444 871612 E: spares@tracmaster.co.uk C500/0105/A
HANDLE BAR ASSEMBLY
C500
Diag No
Part No
Description
1 2 3 4
REF 960200 11159 10831
Main Frame Weldment Pin - Cotter 1/4” x 2 Pin - Hinge Handle Bar Assembly
Qty
1 2 1 1
Teknol House,Victoria Road, Burgess Hill RH15 9LH. T: 0870 224 0369 F: 01444 871612 E: spares@tracmaster.co.uk C500/0105/B
HANDLE BAR ASSEMBLY (continued)
C500
Diag No
Part No
Description
1 2 3 4 5 6 7
10762 10830 726701 630012 730095 1601 722711 762141 724508 762140 750456 630010 10431 630013 7013-04 728014 610005 722204 726201 2541-01 726202 724201 724102 8719-01 630052 730021 630053 760256 REF
Handle Bar Weld 1 Pin - Lock 1 Washer - Flat - 5/8” 1 Spring - Lock 3/4” 1 Pin - Roll, 3/16” x 1-1/4” 1 Handle - Bail - Weld 1 Bolt - Eyebolt 1/4-20 1 Rope - Braided Nylon (not shown) 1 Nut - Lock 1/4”-20 Nylock 2 Throttle - Actuator 2 Screw - #10-24 x 1/2 HH Mach 4 Switch - Deadman 1 Spring - Torsion 1 Nut - Push - 1/4” 2 Spacer - 7/16 OD x 0.272 ID 2 Pin - Clevis 1/4” x 2” 2 Lever - Brake 1 Bolt - Hex 5/16”-18 x 2-3/4” GR8 2 Washer - Flat 5/16” 6 1/2 OD x 14 GA WallTubing 1 Washer Lock 5/16” Plated 2 Nut - Hex 5/16”-18 GR8 2 Nut - Hex #10-24 4 Tube - Plastic 1 Cap - Black,Tube, Manual 2 Wire Tie 14” 2 Mount - Screw,Tube, Manual 2 Screw - #10 x 3/4 Type B 2 Brake Cable Assembly 1
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
Qty
Incl’d In 10831 ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ” ”
Teknol House,Victoria Road, Burgess Hill RH15 9LH. T: 0870 224 0369 F: 01444 871612 E: spares@tracmaster.co.uk C500/0105/C
BELT COVER
C500
Diag No
Part No
Description
1 2 3 4 5 6 7 8 9 10 11
REF 10388 10389 10392 1525 722205 726202 726201 724201 750521 4900-35
Main Frame Weldment Back - Belt Guard Weld. Belt Guard Weld. Spacer - VBG Curatin - Belt Guard Buffer Bolt Hex 5/16”-18 x 1 GR8 Washer Lock 5/16” Plated Washer - Flat 5/16” Nut Hex 5/16”-18 GR8 Bolt Hex 5/16”-24 x 3/4 GR8 Washer 14 GA 0.375 x 1.25
Qty 1 1 1 1 1 3 6 2 1 2 2
Teknol House,Victoria Road, Burgess Hill RH15 9LH. T: 0870 224 0369 F: 01444 871612 E: spares@tracmaster.co.uk C500/0105/D
SAFETY CURTAINS
C500
Diag No
Part No
Description
1 2 3 4 5 6
REF 10819 10821 10823 722103 726607
Main Frame Weldment Curtain - Side Curtain - Side Guard Curtain - Back Bolt Hex 1/4”-20 x 3/4” GR8 Fender Washer
Qty 1 1 1 1 24 24
Teknol House,Victoria Road, Burgess Hill RH15 9LH. T: 0870 224 0369 F: 01444 871612 E: spares@tracmaster.co.uk C500/0105/E
CUTTER WHEEL DRIVE SYSTEM
C500
Diag No
Part No
Description
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
REF 762251 722305 761637 10380 10371 724300 726301 726302 724301 761636 726501 761373 761374 2581-03 10452 730053 722304 761638
Main Frame Weldment Engine - Honda 13hp Bolt - Hex 3/8”-16 x 1-1/2 Bearing - PB 1” Shaft Weld,Cutter Wheel Cutter Wheel, 3/8” x 11 8T Nut - Lock 3/8”-16 Washer - Flat 3/8” USS Washer - Lock 3/8” Nut Hex 3/8”-16 GR8 Clutch, Centrifugal Washer - Flat 1/2” Washer - Lock 7/16” Bolt - Hex 7/16”-20 x 1-1/2” GR8 Keystock, 1/4” x 2 Sheave, Cutter Wheel Screw - Set 5/16”-18 x 3/8” Bolt - Hex 3/8”-16 x 1-1/4” Belt - 2A54 (not shown)
Qty 1 1 4 2 1 1 3 4 4 4 1 1 1 1 2 1 1 3 1
Teknol House,Victoria Road, Burgess Hill RH15 9LH. T: 0870 224 0369 F: 01444 871612 E: spares@tracmaster.co.uk C500/0105/F
CUTTER WHEEL
NOTE: Flywheel side - all teeth on this side are threaded
C500
Diag No
Part No
Description
1 2 3 4 5 6
2933C REF 3144C 2933T 3144T 750949
Left Tooth - Counter-Bored Cutter Wheel Straight Tooth - Counter-Bored Right Tooth - Threaded Straight Tooth - Threaded Socket Head Cap Screw - 5/8”-18 x 1-1/2”
Qty 2 1 2 2 2 8
NOTE: Belt guard side - all teeth on this side are counter-bored
Teknol House,Victoria Road, Burgess Hill RH15 9LH. T: 0870 224 0369 F: 01444 871612 E: spares@tracmaster.co.uk C500/0105/G
ENGINE SYSTEM
C500
Diag No
Part No
Description
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
REF 762251 10457 10471 724503 761642 738204 750546 730051 726302 722302 10438 724301 750541 1539 726301 724104 761643 761644
Main Frame Weldment Engine - Honda 13hp Spacer Nut Choke - Bracket - Weld. Nut - Lock 1/2”-13 Clamp - Cable Cap - Hex - 4 Hose - Oil Drain Clamp - Vinyl Covered 5/8” Washer - Lock 3/8” Bolt - Hex 3/8”-16 x 3/4” GR8 Plate Weld - Back-Up Eng. Nut - Hex 3/8”-16 GR8 Screw - Sq HD Set 3/8”-16 x 4 Block Engine Adjustment Washer - Flat 3/8” USS Screw - #10-24 x 3/4” HH Deflector - Exhaust (not shown) Screw - Mounting Deflector (not shown)
Qty 1 1 2 1 2 1 1 1 1 3 1 2 4 1 1 1 1 1 3
Teknol House,Victoria Road, Burgess Hill RH15 9LH. T: 0870 224 0369 F: 01444 871612 E: spares@tracmaster.co.uk C500/0105/H