==== ==== The Best Performing Birdog Meters Available - Click Here To View http://www.lnbshop.com/best-birdog-meters ==== ====
Satellite dish or satellite TV dish is one of the most important equipment of dish TV. It is an integral part of satellite TV viewing. The satellite dish is a type of parabolic dish that is used to receive and intercept the microwaves from the communication satellites that are places on the orbit of the Earth. The satellite TV transmits those data transmissions to the satellite dish and in turn brings the picture live on our TV screens. The Dish Network antennas have become very common nowadays and can give you the best quality audio and visual output. This satellite dish is very convenient and can be installed in almost everywhere. If you want, you too can install a satellite TV dish all by yourself.However, the entire process can be a bit tiresome. You can also save a lot of money in this process. The professional satellite installation will cost you a lot of money. But installing the satellite dish by yourself you can actually save a great deal of money. In order to install the dish antenna you need to have a few supplies and will have to follow a few steps. Supply: You will need a complete satellite system, coax cable, satellite signal meter, magnetic level, wrench, drill, nut driver drill, lag bolt and other necessary accessories. Method of installation First of all you need to find the right location for installing the satellite TV dish, the antenna should be directed towards the southern sky and hence there should be a clear line of sight. You need to both the mast in a solid and strong foundation. Using a level allow the mast plumb in all direction. You need to tighten the bolts on the must. However, be sure that the mast plumb in all directions. After that you need to set up the dish antenna on the mast. You must get the coax cable through the dish and bring it out from the point where the low noise converter block down feed horn is placed. After connecting the LNBF to the cable you need to attach the feed horn to the dish. Get they right skew and elevation settings with Dish Network Installation guide. You also need to attach the meter on the other side of the coax cable. Then you must turn your meter and sweep the dish both left and right. If your satellite TV dish detects a satellite the meter will give you indication of that. This way you will get an idea about in which position the antenna gets the strongest satellite TV signals and adjust it accordingly then you need to fix the bolts on the dish. You also need to check that whether the vertical adjustment and the horizontal adjustment go with each other. When you come across the maximum signal reading on the meter you need to move
the reflector slowly and then you need to tighten the bolt so that it can get the strong signal. Run the cable from the TV dish to the satellite TV receiver. You can use zip ties and screw clips to the satellite TV mast for a better grip of the cable. You need to connect the cable t o the dish TV receiver. Then you need to connect the receiver to the TV set. Once this step is done, you will be ready to enjoy satellite TV programming from dish network.
To gain more information on Dish Network deals and Satellite TV deals you can log on to theamericandishtv.com where you will get details on the most recent updates on dish TV.
Article Source: http://EzineArticles.com/?expert=Daryl_Stack
==== ==== The Best Performing Birdog Meters Available - Click Here To View http://www.lnbshop.com/best-birdog-meters ==== ====