Uniclass L7315 CI/SfB (52.6)
ACO Stainless Steel Eurogullies Product catalogue
ACO Building Drainage
ACO Building Drainage Our built environment is becoming ever more complex. Applications are becoming more sophisticated and the increasing pressure of regulations and standards make achieving design, performance and financial goals ever tougher. ACO Building Drainage is a new concept within the ACO Group. Our mission: to eliminate design risk, to reduce installed and life cost and to deliver exceptional finish and performance in every product application.
ACO Building Drainage’s extensive portfolio includes:
Stainless steel Modular Channel system
Stainless steel EuroGully gully system
Stainless steel and polymer composite access covers
Biological Grease Management system
Gravity Grease Separator system
Sewer backflow prevention valves
Stainless steel socketed pipe system
We achieve this through three factors:
Rainwater outlets for flat roofs
High performance materials
Design experience and project support
Global manufacturing capacity
For further information on these products and services please consult our comprehensive range of specification and installation guides.
Applied to a range of products for use within, or near to the building envelope, our solutions offer best value where high performance is prerequisite.
ACO Building Drainage is a division of ACO Technologies plc and part of the worldwide ACO Group.
Delivering through understanding, innovation and support
The Group has sales in excess of £300 million worldwide with production facilities in the UK, Germany, France, Switzerland, Denmark, Spain, Poland, Czech Republic, Australia and the USA. In total more than 3000 people are employed in 30 countries throughout the world.
Whatever the material - stainless steel, cast iron, aluminium alloy, polyethylene and polypropylene – our global resources and fabrication capacity make it possible for us to deliver best value both with our standard products and with our bespoke designs. Confidence is further assured with quality systems that are in accordance with ISO 9001.
Contact Details ACO Technologies plc ACO Business Park, Hitchin Road, Shefford, Bedfordshire SG17 5TE.
Tel:
01462 816666 Fax:
01462 851490 e-mail Enquiries:
buildingdrainage@aco.co.uk website:
www.acobuildingdrainage.com
Eurogullies CONTENTS
Systems Overview
Gully Drainage
Page 4
Load Class
Page 6
Foul Air Traps
Page 7
Micro Floor Gullies
System Overview
Page 8
Technical Data
Page 9
EG150 Eurogully
System Overview
Page 10
Technical Data
Page 12
Fixed Height Eurogullies
System Overview
Page 20
Specification and Ordering
Page 22
Technical Data
Page 23
Accessories
Page 25
Telescopic Eurogullies
System Overview
Page 26
Specification and Ordering
Page 28
Technical Data
Page 29
Assembly Inverts
Page 33
Accessories
Page 34
Gratings
For Fixed Height and Telescopic Eurogullies
Page 36
Installation
Micro Floor Gullies / EG150 Eurogully
Page 40
Fixed Height Eurogullies
Page 40
Telescopic Eurogullies
Page 41
ACO Vinyl Seal
Page 42
速
Care and Maintenance
Page 44
Stainless Steel
Families
Page 46
Corrosion Resistance
Page 47
Finishing Processes
Page 48
Material Resistance Chart
Page 50
3
Systems Overview GULLY DRAINAGE
ACO Building Drainage gullies represent the cumulation of many years practical experience and design know-how in stainless steel fabrication technologies. Our state of the art European plants produce products of consistent outstanding quality but with economic benefits that can only be realised through the most advanced manufacturing methods. All the systems featured here are manufactured in austenitic stainless steel grades 304 or 316 and are fully pickle passivated in order to ensure corrosion free product. Their design includes for smooth bowl shaped structures to minimise possible siltation, and all include an integral foul air trap.
The four systems present the designer and installer with literally hundreds of ‘off the shelf’ product combinations to meet nearly every conceivable need or application. However should our range not meet your requirements we have a considerable capacity for bespoke design and manufacture: tundishes, extra inlets, extended bodies or spigots and non-standard outlet sizes can all be accommodated, but please allow extra lead time. The gully systems fall into four main categories: Micro Floor Gullies; EG150 Eurogully; Fixed Height Eurogully and Telescopic Eurogully systems. Each have particular benefits which are summarised briefly here with in depth description and full feature and benefit listings in their relevant sections.
Micro Floor Gully
Typical applications - Washrooms - Toilet areas - Plant rooms
Key features - Shallow light duty gully ideal for construction with depth restrictions - 40mm OD outlet - Easy maintenance - Rodding access and foul air trap as standard
4
Systems Overview GULLY DRAINAGE
EG 150 Eurogully range
Telescopic Eurogullies
Typical applications - Pedestrian areas
- Ideal where finished floor level or drainage connection depth not known
- Light industrial use - Shower areas
Typical applications
- Washdown
- Gully bodies can be used with:
Key features
- Channel systems - Decks - Suspended floors
- Versatility - Available in 304 and 316 grades of stainless steel - Designed for cementitious and resin screed, ceramic tile and vinyl sheet floor - Damp proof membrane bonding flange available - Up to three back inlets - Horizontal or vertical spigot outlet
Key features - Unique separation of grating seat from gully body - Option of a damp proof membrane clamp - Perfect integration between the gully top and finished floor level - Capacity with flow rates up to 6.5 litres per second
Fixed Height Eurogullies
Typical applications - Chemical plants - Food processing areas - Industrial units
Key features - Suitable for areas with high traffic loading
Bespoke Gullies - ACO Building Drainage offer design and manufacture capabilities to accommodate any requests - Dedicated in-house engineers who provide initial guidance through to technical drawings - Manufacture commence on receipt of signed off drawings and official order
- Reinforced edges in 2 and 3mm thick stainless steel - Available in 304 and 316 grades of stainless steel - Wide range of gratings up to Load Class C - With options for either a sieve or debris basket - Hygienic design for easy cleaning - Capacity with flow rates up to 11 litres per second
5
System Overview LOAD CLASS
All ACO Building Drainage products have load classification in accordance with the FACTA (Fabricated Access Covers Trade Association) Load Class criteria. The Load Class table below is provided as a guide only in the selection of fabricated metal gratings and covers for the applications indicated and has been designed specifically to cater for the performance of these products in service. With respect to EN load test standards, the characteristics of stainless steel and mild steel materials are not addressed within their load test criteria.
BS EN 124:1994 and
Slow Moving Wheel
BS EN 1433:2002
Load (Tonnes)
FACTA Load Class
comparisons
Pneumatic Solid
Typical Applications
A
A15
0.5
Pedestrian areas, changing rooms
n/a
and toilets. AA
1.5
n/a
Very light industrial areas, small trolleys and private cars.
AAA
2.5
0.5
Light industrial areas, trolleys and light pallet trucks.
B
B125
5.0
0.75
Factories, industrial plants, pick-up trucks and small pallet trucks.
C
C250
6.5
1.0
Factories, industrial plants, lorries, pallet trucks and small fork lift trucks.
D
D400
11.0
3.0
Heavy duty industrial areas, medium duty fork lift trucks and HGV’s.
E
6
E600
16.0
5.0
Heavy duty industrial areas, heavy duty fork lift trucks and HGV’s.
System Overview FOUL AIR TRAPS
The foul air trap prevents foul air passing back through the gully from stagnant or dirty water within the connecting pipework. The water level is maintained in the gullies by means of weirs formed by the trap unit fitted in the gully body. These are fully removable to allow rodding of the connecting pipework and easy cleaning of the gully body.
MG Micro Floor Gully System The foul air trap is an integral part of the grating and allows full rodding access to the drainage pipework and eradicates the need for additional rodding eyes.
Vertical Gully
EG150 Gully System A removable in-line foul air trap is fitted as standard. This facilitates efficient access for rodding and jetting.
Vertical Gully
Horizontal Gully
Vertical Gully
Horizontal Gully
EG Fixed Height and Telescopic Gully Systems The gullies are supplied complete with a one piece foul air trap. The foul air traps, both on the horizontal and vertical gullies, are completely removable to allow rodding access to the connecting pipework for easy cleaning and maintenance.
7
Micro Floor Gullies SYSTEM OVERVIEW
With Integral Foul Air Trap Flow Rate 0.24 l/s, FACTA Load Class A The Micro Floor Gully is a light duty, compact trapped drain manufactured from Grade 304 stainless steel. It is designed to provide discrete drainage for washrooms, toilet areas and plant rooms. An invert depth of just 76mm makes it ideal for use in areas where depth is restricted or for refurbishment work where excavation can be kept at a minimum. 1 1
The drain is supplied with a circular grating located in a 100mm square top. An optional lockable grating is also available.
2
2
The foul air trap is an integral part of the grating and allows full rodding access to the drainage pipework and eradicates the need for additional rodding eyes.
3
Suitable for use with cementitious/resin screed
3
and tile applications 4
Complete with fixing tangs with earth wire connections.
5
50mm water seal depth meets requirements of BS EN 1253.
6
Compact unit - 76mm invert depth.
7
The drain has a vertical spigot outlet allowing
4 5
6
easy connection to existing pipework with either push fit or compression fittings.
8
7
Micro Floor Gullies TECHNICAL DATA
Specification Clause The floor drains are to be the MG or MGL as supplied by ACO Building Drainage, (a division of ACO Technologies plc.), Hitchin Road, Shefford, Bedfordshire, UK SG17 5TE. All components to be manufactured from austenitic stainless steel Grade 304 to EN 10088 and to be fully pickle passivated. The Micro Floor Gully Part No. MG/MGL* will be complete with removable foul air trap and grating. All components used within the scope of this system are shown on Drawing No. __________*and all work will be carried out strictly in accordance with the manufacturer's instructions and the installation details set out on Drawing No. __________*.
*
please delete or complete as appropriate.
MG100FSV/40 Gully (no locking) X
100mm
47mm
133mm
76mm
100mm
X Ø40mm
Ø80mm
Side View Description
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
4156
N/A
0.24l/s
0.35 Kg
A
MG100FSV/40
MGL100FSV/40 Gully (locked) X
100mm
133mm
47mm
100mm
X Ø40mm
Ø79mm
Side View Description MGL100FSV/40
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
4157
N/A
0.24l/s
0.35 Kg
A
9
EG150 Eurogully SYSTEM OVERVIEW
Eurogully Range
1
2
ACO Building Drainage has designed a wide range of multi-application, high performance stainless steel floor gullies. The ACO Building Drainage EG150 range of Eurogullies are designed to provide hygienic, quick, simple and economic trapped drainage solutions for light industrial use, washrooms, ‘wet’ bathrooms, changing rooms, swimming pools, hotels, apartments and toilets. All floor finishes are catered for including cementitious and resin screeds, ceramic tiles, flexible vinyl sheet in solid and suspended flooring applications. Manufactured in austenitic 304 grade stainless steel as standard, excellent corrosion resistance is guaranteed. Optional 316 grade stainless steel for aggressive applications is available on all gullies.
3
ACO Building Drainage EG150 Eurogullies are supplied with perforated gratings as standard ensuring no risk to bare feet or stiletto heels. A slip resistant or plain mesh grating is available for cementitious/resin screeds and tile applications.
4 8 5
9 6
7
10
EG150 Eurogully SYSTEM OVERVIEW
1
Foot safe, perforated FACTA Load Class A grating fitted as standard for pedestrian applications.
2
Maintainability provided through removable sieve.
3
Removable in-line foul air trap fitted as standard, flow rate 1.2 l/s. 50mm water seal meets requirements of BS EN 1253.
4
Telescopic height variant providing full 360° rotation and +/- 7.5° pitch and roll adjustment.
5
Smooth contour design minimises bacteria traps.
6
3 back inlet variant available supplied with fully interchangeable adaptors to suit 32mm / 1.25” to BS 5254 and 40mm / 1.5” to BS 5255 waste pipes.
7
Ø110mm vertical spigot outlet.
8
Clamp for vinyl flooring.
9
Ends stops provided preventing accidental dismantling on telescopic variants.
10 DPM bonding flanges available for the ultimate in sub-floor security. 11 Ø75mm horizontal spigot outlet. 12 Shallow gully option, ideal for suspended floor or other restricted depth applications.
10
12 11
11
EG150 Eurogully TECHNICAL DATA
For cementitious/resin screed and tile applications EG150FVL/110 150mm
52mm
105mm
X
X Ø110mm
Side View
Description EG150FVL/110
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97211
97261
1.2l/s
1.0 Kg
A
EG150TV/110 X
212-242mm
52mm
150mm
X Ø110mm
Side View Description EG150TV/110
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97200
97250
1.2l/s
1.5 Kg
A 150mm
52mm
Ø32-Ø40mm
212-242mm
83-113mm
X
EG150TV3i/110
X 35mm
Ø110mm
Side View
12
Description EG150TV3i/110
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97202
97252
1.2l/s
1.8 Kg
A
EG150 Eurogully TECHNICAL DATA
EG150THL/75
150mm
75mm
52mm
120-150mm
X
75mm
X
Side View Description EG150THL/75
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97201
97251
1.2l/s
1.6 kg
A
EG150TH3i/75 X
X
EG150TH3i/75
Section X-X
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97203
97253
1.2l/s
1.9 Kg
A 150mm
75mm 52mm
73-103mm Ø32-Ø40mm
120-150mm
X
75mm 35mm
Side View
EG150THL3i/75
Plan View
X
EG150THL3i/75
Description
75mm
35mm
Side View
Description
75mm
52mm
213-243mm
83-113mm
Ø32-40mm
150mm
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97213
97263
1.2l/s
1.9 Kg
A
13
EG150 Eurogully TECHNICAL DATA
For Damp proof membrane bonding
150mm
X
212-242mm
52mm
EG150TVB/110
Ø250mm X Ø110mm
Side View Description EG150TVB/110
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97216
97266
1.2l/s
1.2 Kg
A 150mm
EG150TVB3i/110
52mm
Ø32-40mm
213-243mm
83-113mm
X
Ø250mm
35mm
X Ø110mm
Side View Description EG150TVB3i/110
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97205
97255
1.2l/s
2.2 Kg
A 150mm
EG150THBL/75
Ø75mm
52mm
120-150mm
X
75mm X Ø250mm
Side View Description EG150THBL/75
14
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97204
97254
1.2l/s
2.3 Kg
A
EG150 Eurogully TECHNICAL DATA
EG150THB3i/75
150mm
X
Ø250mm
75mm
35mm
Side View Description
Ø75mm
52mm
Ø32-40mm
213-243mm
83-113mm
X
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG150THB3i/75
97206
97256
1.2l/s
2.3 Kg
A
EG150THBL3i/75
X
Ø75mm
52mm Ø32-40mm
120-150mm
73-103mm
150mm
X
75mm 35mm Ø250mm
Side View Description EG150THBL3i/75
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97214
97264
1.2l/s
2.3 Kg
A
For Vinyl sheet flooring EG150FVL/VNL/110
52mm
112mm
X
X Ø110mm Ø225mm
Side View Description EG150FVL/VNL/110
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97212
97262
1.2l/s
1.2 Kg
A
15
EG150 Eurogully TECHNICAL DATA
EG150TV/VNL/110
219-249mm
52mm
X
Ø225mm
X Ø110mm
Side View Description EG150TV/VNL/110
EG150TV3i/VNL/110
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97207
97257
1.2l/s
1.7 Kg
A
X
52mm
Ø32-Ø40mm
219-249mm
90-120mm
X
35mm
Ø225mm
Ø110mm
Side View
Plan View
316 Part No
Flow Rate
Weight
Load Class
97209
97259
1.2l/s
2.0 Kg
A
EG150THL/VNL/75
X
Ø75mm
X
126-156mm
304 Part No
EG150TV3i/VNL/110
52mm
Description
Section X-X
75mm
Ø225mm
Side View Description EG150THL/VNL/75
16
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97208
97258
1.2l/s
1.8 Kg
A
EG150 Eurogully TECHNICAL DATA
EG150TH3i/VNL/75
X
EG150TH3i/VNL/75
75mm
35mm
Side View Description
Ø75mm
52mm
Ø32-40mm
220-250mm
90-120mm
X
Ø225mm
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97210
97260
1.2l/s
2.1 Kg
A
EG150THL3i/VNL/75
Ø32-40mm
79-109mm
126-156mm
X
Side View Description EG150THL3i/VNL/75
Ø75mm
52mm
X
75mm 35mm
Ø225mm
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97215
97265
1.2l/s
2.1 Kg
A
For cementitious/resin screed and tile applications with top for mesh grate Ø150mm
52mm
105mm
X
21mm
EG150FVLM/110
X Ø110mm
Side View Description EG150FVLM/110
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
400834
400835
1.2l/s
1.0 Kg
A
17
EG150 Eurogully TECHNICAL DATA
EG150TVM/110
X
212-242mm
52mm
150mm
X Ø110mm
Side View 304 Part No
316 Part No
Flow Rate
Weight
Load Class
97296
97298
1.2l/s
1.5 Kg
A 150mm
Ø32-40mm
212-242mm
83-113mm
X
EG150TVM3i/110
X
52mm
EG150TVM/110
Plan View
21mm
Description
Section X-X
35mm
Ø110mm
Side View
EG150TVM3i/110
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97312
97314
1.2l/s
1.8 Kg
A 155mm
X
52mm
EG150THLM/110
Plan View
120-150mm
Description
Section X-X
X Ø75mm
Side View Description EG150THLM/75
18
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97308
97310
1.2l/s
1.6 Kg
A
EG150 Eurogully TECHNICAL DATA
X
150mm
X
213-243mm Ø75mm
52mm
Ø32-40mm
83-113mm
EG150THM3i/75
35mm
75mm
Side View Description EG150THM3i/75
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
97316
97318
1.2l/s
1.9 Kg
A
Mesh Grates 142mm
23mm
142mm
20mm
EG150AS Grating 142mm x 142mm Anti Slip Mesh
23mm
2mm
Plan View
Side View Description EG150AS
304 Part No
316 Part No
Weight
05964
15964
0.6 Kg
23mm
142mm
20mm
23mm
2mm
Side View
EG150PL
A 142mm
EG150PL Grating 142mm x 142mm Plain Mesh
Description
Load Class
Plan View
304 Part No
316 Part No
Weight
Load Class
05965
15965
0.6 Kg
A
Sieve A
Side View Description EG150SI
Plan View
304 Part No
316 Part No
A
Weight
97235
97285
108mm
0.10Kg
19
Fixed Height Eurogullies SYSTEM OVERVIEW
EG200F
With Integral Foul Air Trap
EG250F
Flow Rates 2.8 to 11.0 l/s, FACTA Load Classes A, B and C One-piece Eurogullies, designed to be used in commercial applications, are simple free-standing units suitable for concrete, resin or tiled floors.
EG300F EG400F Perforated (RPER)*
The gullies are produced in a number of versions featuring different flow rates, grating sizes and body and spigot outlet diameters to suit various applications. The gullies are manufactured from 2 and 3mm thick austenitic stainless steel Grades 304 or 316 to EN 10088.
Ladder (RLAD)*
Eurogullies are pickle passivated to ensure corrosion free joints. 1
Optional sieve or basket collects debris effectively.
2
The gullies are supplied complete with a one
Annular (ANL)*
piece foul air trap. The foul air traps, both on the horizontal and vertical gullies, are completely removable to allow rodding access to the connecting pipework for easy cleaning and maintenance.
1
3
The foul air trap seal depth of 70mm exceeds the requirements of Euronorm BS EN 1253.
4
5mm solid circular top edge provides strength and durability capable of withstanding heavy loading conditions and helps eliminate stress
2
cracks in floor finishes. 3
5
The height adjustable levelling feet make installation quick and easy.
6
Bowl shaped bodies deter silt and debris collecting in corners making cleaning easy.
7
Ø110, Ø160 and Ø200mm spigot outlets are available.
4
5
6
20 7
*
Product code
Fixed Height Eurogullies SYSTEM OVERVIEW
Ladder (LAD)*
Anti-slip Mesh (AS)*
Plain Mesh (PL)*
Weir (WR)*
Solid (SOL)*
Perforated (PER)*
8
Horizontal basket collects debris effectively.
9
The gully top has a channel edge detail of 15mm
Heelsafe (HEL)*
providing an attractive finish and will accept ACO VinylSeal速 (see page 42). 10
Eurogullies are pressed to achieve a smooth transition from the square seating shape for the grating to the round body and to prevent sediment build up in the flange area.
8
11
Electrical earthing point is provided as standard on every gully body.
12
Chamfered spigot outlets allow easy push fit connection onto existing drainage pipes.
2
9 10
11
21
12
*
Product code
Fixed Height Eurogullies SPECIFICATION AND ORDERING
To specify or order a Fixed Height Eurogully please use code sequence below. Please Note all gullies are supplied with foul air traps fitted as standard. XXXXX-X-X-XXX-XXX-XXX-X-XXX
Gully Body EG200F-EG250F EG300F-EG400F
Material Option 304 = Grade Stainless Steel 316 = Grade Stainless Steel
Top Option S = Square Top R = Round Top R not available for EG400F
Load Class Option A-B-C
Outlet Option V -Vertical H - Horizontal
Grate Options AS-PL-PER- SOL LAD-WRHEL RPER-RLAD-ANL
Outlet Size Ø110mm Ø160mm Ø200mm
Filter Options SI = Sieve FVSB = Vertical Basket FHSB = Horizontal Basket
Example 1 EG200F-S-V-110-FVSB-LAD-C-304 EG200F gully body, with 200mm square top and vertical 110mm diameter spigot, fixed height vertical basket, ladder grate, Load Class C. 304 grade stainless steel.
Specification Clause The gullies are to be Fixed Height Eurogullies as supplied by ACO Building Drainage (a division of ACO Technologies plc), of Hitchin Road, Shefford, Bedfordshire, UK SG17 5TE. All components to be manufactured from austenitic stainless steel Grade 304/316*to EN 10088 and to be fully pickle passivated and where appropriate gratings to be electropolished. The Fixed Height Eurogully Part No.__________*will be complete with removable foul air trap, optional sieve/silt basket*and grating/cover*. All components used within the scope of this system are shown on Drawing No.__________*and all work shall be carried out strictly in accordance with the manufacturer's instructions and the installation details set out on Drawing No.__________*.
22
*please delete or complete as appropriate.
Note: For Fixed Height Eurogully installation details refer to page 46.
Fixed Height Eurogullies TECHNICAL DATA
Square fixed height system A
B
70mm
E
F
X
X C D
Side View Description
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG200FSV/110
05734
15734
3.4l/s
3.7Kg
C
EG250FSV/110
05394
15394
4.0l/s
4.8Kg
C
EG300FSV/160
05403
15403
6.5l/s
6.8Kg
C
EG400FSV/160
05766
15766
10.0l/s
12.0Kg
C
EG400FSV/200
05768
15768
11.0l/s
12.3Kg
C
Dimensions Description
A
B
C
D
E
F
EG200FSV/110
200mm
311mm
Ø110mm
Ø157mm
231mm
41mm
EG250FSV/110
250mm
331mm
Ø110mm
Ø200mm
251mm
41mm
EG300FSV/160
300mm
361mm
Ø160mm
Ø257mm
281mm
41mm
EG400FSV/160
400mm
416mm
Ø160mm
Ø357mm
336mm
41mm
EG400FSV/200
400mm
416mm
Ø200mm
Ø357mm
336mm
41mm
A
70mm
B
E
F
X
X C D
Side View Description
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG200FSH/110
05735
15735
2.8l/s
3.2Kg
C
EG250FSH/110
05395
15395
3.2l/s
4.2Kg
C
EG300FSH/160
05404
15404
6.0l/s
6.3Kg
C
EG400FSH/160
05767
15767
8.5l/s
12.0Kg
C
EG400FSH/200
05769
15769
9.5l/s
12.3Kg
C
A
B
C
D
E
F
EG200FSH/110
200mm
231mm
Ø110mm
Ø157mm
209mm
41mm
EG250FSH/110
250mm
251mm
Ø110mm
Ø200mm
212mm
41mm
EG300FSH/160
300mm
271mm
Ø160mm
Ø257mm
241mm
41mm
EG400FSH/160
400mm
346mm
Ø160mm
Ø357mm
264mm
41mm
EG400FSH/200
400mm
346mm
Ø200mm
Ø357mm
264mm
41mm
Dimensions Description
23
Fixed Height Eurogullies TECHNICAL DATA
Round fixed height system A
B
E
70mm
F
X
X C D
Side View Description
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG200FRV/110
97113
400819
3.4l/s
3.7Kg
C
EG250FRV/110
97117
400821
4.0l/s
4.8Kg
C
EG300FRV/160
97125
400825
6.5l/s
6.8Kg
C
Dimensions Description
A
B
C
D
E
F
EG200FRV/110
Ø197mm
300mm
Ø110mm
Ø157mm
220mm
41mm
EG250FRV/110
Ø241mm
320mm
Ø110mm
Ø201mm
240mm
41mm
EG300FRV/160
Ø297mm
350mm
Ø160mm
Ø257mm
270mm
41mm
A
70mm
C
B
E
F
X
X D
Side View Description
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG200FRH/110
97133
97366
2.8l/s
3.2Kg
C
EG250FRH/110
97137
97387
3.2l/s
4.2Kg
C
EG300FRH/160
97145
92506
6.0l/s
6.3Kg
C
A
B
C
D
E
F
EG200FRH/110
Ø197mm
205mm
Ø110mm
Ø157mm
197mm
41mm
EG250FRH/110
Ø241mm
208mm
Ø110mm
Ø200mm
199mm
41mm
EG300FRH/160
Ø297mm
246mm
Ø160mm
Ø257mm
237mm
41mm
Dimensions Description
24
Fixed Height Eurogullies ACCESSORIES
Sieve
A
Side View Description
Plan View
304 Part No
316 Part No
A
Weight
EG200FSI
05780
15780
152mm
0.15Kg
EG250FSI
05781
15781
195mm
0.35KG
EG300FSI
05782
15782
252mm
0.55Kg
B
Vertical Silt Basket
A
Side View
Plan View
Description
304 Part No
316 Part No
A
B
Weight
EG200FVSB
05784
15784
50mm
150mm
0.3Kg
EG250FVSB
05786
15786
70mm
193mm
0.5Kg
EG300FVSB
05788
15788
85mm
250mm
0.8Kg
EG400FVSB
05790
15790
125mm
350mm
1.95Kg
B
Horizontal Silt Basket
A
Side View
Plan View
Description
304 Part No
316 Part No
A
B
Weight
EG200FHSB
05785
15785
160mm
150mm
0.55Kg
EG250FHSB
05787
15787
186mm
194mm
0.9Kg
EG300FHSB
05789
15789
216mm
250mm
1.5Kg
EG400FHSB
05791
15791
246mm
350mm
2.0Kg
Kit for vinyl floor applications See page 42 for more detail
Side View
Description
316 Part No
Size
Weight
Load Class
EG200VNL
49448
N/A
1.0Kg
N/A
EG250VNL
49447
N/A
1.0Kg
N/A
EG300VNL
49453
N/A
1.0Kg
N/A
EG400VNL
49454
N/A
1.0Kg
N/A
25
Telescopic Eurogullies SYSTEM OVERVIEW
EG200T
With integral foul air trap
EG250T EG300T
The Telescopic Eurogullies are produced in a number of versions suitable for different flow rates, grating sizes and body and spigot outlet diameters to suit various applications.
1
Perforated (RPER)*
2 3
4 5
Flow Rates 2.8 to 6.5 l/s, FACTA Load Classes A and C
With the same features as the Fixed Height Eurogully range the Telescopic Eurogully has the added advantage of invert adjustability. Refer to page 39 for further details. The gullies can be installed as free-standing units or as channel outlets in a variety of floor types. The gullies are manufactured from 2 and 3mm thick austenitic stainless steel Grades 304 or 316 to EN 10088. Eurogullies are pickle passivated to ensure corrosion free joints. 1
Grating and cover options are available in Facta Load Classes A and C.
2
Optional sieve or basket collects debris effectively.
3
5mm solid edge provides strength and durability capable of withstanding heavy loading conditions.
4
The height adjustable levelling feet make installation quick and easy.
6
5
Telescopic gully top provides limited variable invert capability.
7 6
The gullies are supplied complete with a one piece foul air trap. The foul air traps, both on the horizontal and vertical gullies, are completely removable to allow rodding access to the
8
connecting pipework for easy cleaning and maintenance. 7
The foul air trap seal depth of 70mm exceeds the requirements of Euronorm BS EN 1253.
9
8
Optional plastic drainage ring is available to drain sub-surface water into gully where a damp proof membrane is used.
10
9
Optional double clamping flange to clamp damp proof membrane.
11
26
10 All flange plates have pre-drilled holes for easy screw fixing. 11 Deep rounded bodies to deter silt and debris collecting in the corners and makes cleaning easy.
Telescopic Eurogullies SYSTEM OVERVIEW
12 Horizontal basket collects debris effectively.
1
13 Eurogullies are pressed to achieve a smooth transition from the square seating shape for the grating to the round body and to prevent
Plain Mesh (PL)*
sediment build up in the flange area. 14 The gully top has a channel edge detail of 15mm providing an attractive finish and will accept ACO VinylSeal® (see page 42).
12
15 Electrical earthing point is provided as standard on every gully body. 16 The height adjustable levelling feet make installation quick and easy. 17 A rubber ‘O’-ring provides a seal between the gully body and gully top. 18 Chamfered spigot outlets allow easy push fit connection onto existing drainage pipes.
13
19 Ø110 and Ø160mm spigot outlets are available.
14
15
Gratings and Cover Options
16
17
6
Ladder (RLAD)*
Annular (ANL)*
Ladder (LAD)*
Anti-slip Mesh (AS)*
Weir (WR)*
Perforated (PER)*
27
18 Heelsafe (HEL)* 19
*
Product code
Solid (SOL)*
Telescopic Eurogullies SPECIFICATION AND ORDERING
To specify or order a Telescopic Eurogully please use code sequence below. Please Note all gullies are supplied with foul air traps fitted as standard. XXXXXX.X.X-XXX-XXX-XXX-XXX-X-XXX
Gully Body EG200T-EG250T EG300T
Material Option 304 = Grade Stainless Steel 316 = Grade Stainless Steel
Outlet Option V = Vertical H = Horizontal
Load Class Option A-B-C
Flange Type R = 50mm Flange D = Membrane Flange
Grate Options AS-PL-PER- SOL LAD-WRHEL RPER-RLAD-ANL
Outlet Size Ø110mm Ø160mm Ø200mm
Filter Options SI = Sieve TVSB = Vertical Basket THSB = Horizontal Basket
Gully Top Option SGT = Square Top RGT = Round Top
Example 1 EG250T.H.R-110-SGT-THSB-HEL-A-304 EG250 telescopic gully body, horizontal, 50mm flange, 110mm diameter spigot, 200mm square gully top, telescopic horizontal basket, Heelsafe grate, Load Class A. 304 grade stainless steel.
Specification Clause The gullies are to be Telescopic Eurogullies as supplied by ACO Building Drainage (a division of ACO Technologies plc), of Hitchin Road, Shefford, Bedfordshire, UK SG17 5TE. All components to be manufactured from austenitic stainless steel Grade 304/316*to EN 10088 and to be fully pickle passivated and where appropriate gratings to be electropolished. The Telescopic Eurogully Part No.__________*will be complete with removable foul air trap, optional sieve/silt basket*and grating/cover*.
28
All components used within the scope of this system are shown on Drawing No.__________*and all work shall be carried out strictly in accordance with the manufacturer's instructions and the installation details set out on Drawing No.__________*. *please delete or complete as appropriate.
Note: For Telescopic Eurogully installation details refer to page 47.
Telescopic Eurogullies TECHNICAL DATA
Telescopic gully bodies A
B
70mm
E
X
X C D
Side View Description
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG200TV/110
05724
15724
3.4l/s
3.6Kg
C
EG250TV/110
05364
15364
4.0l/s
4.5Kg
C
EG300TV/160
05368
15368
6.5l/s
6.4Kg
C
A
B
C
D
E
EG200TV/110
Ø257mm
260mm
Ø110mm
Ø157mm
180mm
EG250TV/110
Ø300mm
280mm
Ø110mm
Ø200mm
200mm
EG300TV/160
Ø357mm
310mm
Ø160mm
Ø257mm
230mm
Dimensions Description
A
71mm
B
E
X
X C D
Side View Description
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG200TH/110
05725
15725
2.8l/s
2.9Kg
C
EG250TH/110
05365
15365
3.2l/s
3.9Kg
C
EG300TH/160
05369
15369
6.0l/s
5.9Kg
C
Dimensions Description
A
B
C
D
E
EG200TH/110
Ø257mm
180mm
Ø110mm
Ø157mm
158mm
EG250TH/110
Ø300mm
200mm
Ø110mm
Ø200mm
160mm
EG300TH/160
Ø357mm
230mm
Ø160mm
Ø257mm
200mm
29
Telescopic Eurogullies TECHNICAL DATA
Telescopic gully bodies membrane flange A
70mm
B
E
X
X C D
Side View Description
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG200TVD/110
05728
15728
3.4l/s
3.6Kg
C
EG250TVD/110
05376
15367
4.0l/s
4.5Kg
C
EG300TVD/160
05384
15384
6.5l/s
6.4Kg
C
Dimensions Description
A
B
C
D
E
EG200TVD/110
Ø358mm
260mm
Ø110mm
Ø157mm
180mm
EG250TVD/110
Ø401mm
280mm
Ø110mm
Ø200mm
200mm
EG300TVD/160
Ø458mm
310mm
Ø160mm
Ø257mm
230mm
A
70mm
B
E
X
X C D
Side View Description
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG200THD/110
05729
15729
2.8l/s
2.9Kg
C
EG250THD/110
05377
15377
3.2l/s
3.9Kg
C
EG300THD/160
05385
15385
6.0l/s
5.9Kg
C
Dimensions Description
30
A
B
C
D
E
EG200THD/110
Ø358mm
180mm
Ø110mm
Ø157mm
158mm
EG250THD/110
Ø401mm
200mm
Ø110mm
Ø200mm
160mm
EG300THD/160
Ø458mm
230mm
Ø160mm
Ø257mm
200mm
Telescopic Eurogullies TECHNICAL DATA
Telescopic gully Tops A
B
D
X
X C
Side View Description
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG200SGT/110
05902
15902
N/A
1.7Kg
C
EG250SGT/110
05904
15904
N/A
2.2Kg
C
EG300SGT/160
05906
15906
N/A
2.75Kg
C
Dimensions Description
A
B
C
D
EG200SGT/110
200mm
202mm
142mm
41mm
EG250SGT/110
250mm
202mm
184mm
41mm
EG300SGT/160
300mm
202mm
242mm
41mm
A
B
D
X
X C
Side View Description
Section X-X
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG200RGT/110
97101
N/A
N/A
1.7kg
C
EG250RGT/110
97103
N/A
N/A
2.2Kg
C
EG300RGT/160
97105
N/A
N/A
2.75Kg
C
Dimensions Description
A
B
C
D
EG200RGT/110
Ø197mm
192mm
Ø142mm
41mm
EG250RGT/110
Ø241mm
192mm
Ø184mm
41mm
EG300RGT/160
Ø297mm
192mm
Ø242mm
41mm
31
Telescopic Eurogullies TECHNICAL DATA
Raising Pieces
B
A
C
Side View Description
Plan View
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG200RP
05854
15854
N/A
1.7Kg
C
EG250RP
05855
15855
N/A
2.2Kg
C
EG300RP
05856
15856
N/A
2.75Kg
C
Dimensions Description
A
B
C
EG200RP
Ø358mm
180mm
Ø142mm
EG250RP
Ø401mm
180mm
Ø184mm
EG300RP
Ø458mm
180mm
Ø242mm
B
A
C
Side View
Plan View
Description
304 Part No
316 Part No
Flow Rate
Weight
Load Class
EG200RPD
05851
15851
N/A
1.7kg
C
EG250RPD
05852
15852
N/A
2.2Kg
C
EG300RPD
05853
15853
N/A
2.75Kg
C
Dimensions
32
Description
A
B
C
EG200RPD
Ø358mm
180mm
Ø142mm
EG250RPD
Ø401mm
180mm
Ø184mm
EG300RPD
Ø458mm
180mm
Ø242mm
377mm (maximum assembly height) 352mm (minimum assembly height)
152mm (minimum)
177mm (maximum)
382mm (minimum assembly height)
EG300TH Assembly Detail
407mm (maximum assembly height)
152mm (minimum)
EG300TV Assembly Detail 25mm (minimum engagement)
EG250TV Assembly Detail
177mm (maximum)
432mm (minimum assembly height)
457mm (maximum assembly height)
152mm (minimum)
177mm (maximum)
25mm (minimum engagement)
152mm (minimum)
177mm (maximum)
332mm (minimum assembly height)
357mm (maximum assembly height)
152mm (minimum)
177mm (maximum)
25mm (minimum engagement)
412mm (minimum assembly height)
437mm (maximum assembly height)
25mm (minimum engagement)
EG200TV Assembly Detail
25mm (minimum engagement)
462mm (minimum assembly height)
487mm (maximum assembly height)
177mm (maximum) 152mm (minimum)
25mm (minimum engagement)
Telescopic Eurogullies
ASSEMBLY INVERTS EG200TH Assembly Detail
EG250TH Assembly Detail
33
Telescopic Eurogullies ACCESSORIES
Telescopic Gullies Sieve A
Side View Description
Plan View
304 Part No
316 Part No
A
EG200TSI
05838
15838
Ø136mm
Weight 0.15Kg
EG250TSI
05839
15839
Ø178mm
0.35KG
EG300TSI
05840
15840
Ø236mm
0.55Kg
Vertical Silt Basket B
A
Side View
Plan View
Description
304 Part No
316 Part No
A
B
Weight
EG200TVSB
05833
15833
80mm
Ø133mm
0.35Kg
EG250TVSB
05835
15835
100mm
Ø175mm
0.5Kg
EG300TVSB
05837
15837
115mm
Ø235mm
0.8Kg
B
Horizontal Silt Basket
A
Side View
34
Plan View
Description
304 Part No
316 Part No
A
B
Weight
EG200THSB
05832
15832
190mm
Ø133mm
0.45Kg
EG250THSB
05834
15834
215mm
Ø175mm
0.9Kg
EG300THSB
05836
15836
245mm
Ø234mm
1.6Kg
Telescopic Eurogullies ACCESSORIES
‘O’ - Ring
Description
Part No
Size
Weight
Load Class
EG200R
05844
N/A
0.1Kg
N/A
EG250R
05845
N/A
0.1Kg
N/A
EG300R
05846
N/A
0.1Kg
N/A
Drainage Ring
Side View Description
Plan View
Part No
Size
Weight
Load Class
EG200DR
05841
N/A
0.1Kg
N/A
EG250DR
05842
N/A
0.1Kg
N/A
EG300DR
05843
N/A
0.15Kg
N/A
Kit for vinyl floor applications See page 48 for more detail
Side View
Description
Part No
Size
Weight
Load Class
EG200VNL
49448
N/A
1.0Kg
N/A
EG250VNL
49447
N/A
1.0Kg
N/A
EG300VNL
49453
N/A
1.0Kg
N/A
35
Gratings FOR EUROGULLY FIXED HEIGHT AND TELESCOPIC RANGES
Anti Slip Mesh Class C
23mm
B
A
C
23mm
Side View Description
3mm
Plan View
304 Part No
316 Part No
A
B
C
Weight
Load Class
EG200AS
05912
15912
40mm
168mm
168mm
1.4Kg
C
EG250AS
05919
15919
40mm
218mm
218mm
2.0Kg
C
EG300AS
05923
15923
40mm
268mm
268mm
2.9Kg
C
EG400AS
05926
15926
40mm
368mm
368mm
5.2Kg
C
Plain Mesh Class C
23mm
B
A
C
23mm
Side View Description
3mm
Plan View
304 Part No
316 Part No
A
B
C
Weight
Load Class
EG200PL
05915
15915
40mm
168mm
168mm
1.4Kg
C
EG250PL
05921
15921
40mm
218mm
218mm
2.0Kg
C
EG300PL
05925
15925
40mm
368mm
368mm
2.9Kg
C
EG400PL
05927
15927
40mm
269mm
268mm
5.2Kg
C
Perforated Class A
7mm
B
A
C
Side View Description
36
Plan View
304 Part No
316 Part No
A
B
C
Weight
Load Class
EG200PER
42111
42501
40mm
168mm
168mm
1.4Kg
A
EG250PER
42115
42505
40mm
218mm
218mm
1.6Kg
A
EG300PER
42119
42509
40mm
268mm
268mm
2.2Kg
A
Gratings FOR EUROGULLY FIXED HEIGHT AND TELESCOPIC RANGES
Solid Class A
B
A
C
Side View
Plan View
Description
304 Part No
316 Part No
A
B
C
Weight
Load Class
EG200SOL
42112
42502
40mm
168mm
168mm
1.4Kg
A
EG250SOL
42116
42506
40mm
218mm
218mm
1.7Kg
A
EG300SOL
42120
42510
40mm
268mm
268mm
2.3Kg
A
Ladder Class C
5mm
B
A
20mm
C
Side View
Plan View
Description
304 Part No
316 Part No
A
B
C
Weight
Load Class
EG200LAD
401691
401695
40mm
168mm
168mm
2.2Kg
C
EG250LAD
401692
401696
40mm
218mm
218mm
4.0Kg
C
EG300LAD
401693
401697
40mm
268mm
268mm
6.0Kg
C
EG400LAD
401694
401698
40mm
368mm
368mm
13.0Kg
C
Weir Class C
B
10mm
A
C
Side View Description
Plan View
304 Part No
316 Part No
A
B
C
Weight
Load Class
EG200WR
42114
42504
40mm
168mm
148mm
1.5Kg
C
EG250WR
42118
40854
40mm
218mm
198mm
4.3Kg
C
EG300WR
42122
42512
40mm
268mm
248mm
6.5Kg
C
EG400WR
05943
15943
40mm
368mm
348mm
11.0Kg
C
37
Gratings FOR EUROGULLY FIXED HEIGHT AND TELESCOPIC RANGES
Heelsafe Class A
C 7mm
X
B
Side View Description
5mm
7mm
A
X
Section X-X
Plan View
304 Part No
316 Part No
A
B
C
Weight
Load Class
EG200HEL
96883
N/A
40mm
168mm
168mm
1.5Kg
A
EG250HEL
96884
N/A
40mm
218mm
218mm
2.2Kg
A
EG300HEL
96831
N/A
40mm
268mm
268mm
3.0Kg
A
Round Perforated Class A mm
A
Ø5
B
Side View
38
Plan View
Description
304 Part No
316 Part No
A
B
Weight
Load Class
EG200RPER
401490
401491
40mm
Ø188mm
1.6Kg
A
EG250RPER
401492
401493
40mm
Ø232mm
2.5Kg
A
EG300RPER
401494
401495
40mm
Ø288mm
4.0Kg
A
Gratings
Round Ladder Class C
5mm
FOR EUROGULLY FIXED HEIGHT AND TELESCOPIC RANGES
5mm
A
B
15mm
Side View
Plan View
Description
304 Part No
316 Part No
A
B
Weight
Load Class
EG200RLAD
97147
97368
40mm
Ø170mm
2.2Kg
C
EG250RLAD
97149
97389
40mm
Ø232mm
4.0Kg
C
EG300RLAD
97151
97508
40mm
Ø288mm
6.0Kg
C
A
10mm
Annular Class C
B
C
Side View
Plan View
Description
304 Part No
316 Part No
A
B
C
Weight
Load Class
EG200ANL
97155
97371
40mm
Ø188mm
168mm
1.5Kg
C
EG250ANL
97157
97392
40mm
Ø232mm
212mm
4.0Kg
C
EG300ANL
97159
92511
40mm
Ø288mm
268mm
6.0Kg
C
39
Installation
Micro Floor Gullies/EG150 Eurogully
Sheet Flooring
Sealant
(Sheet floor not suited to MG range)
Floor Finish
Locate the drain in the correct position in the floor and connect to the drainage pipework system. Backfill around the drain and dress floor finish up to the drain edge. Remove any protective tape/film from the unit.
Resin or Cement Grout
A mastic sealant of bead width 5 - 8mm is recommended around the outside of the drain top edge and floor finish where a good watertight seal is required between the two materials.
Pipework System
Ensure the sealant is applied in accordance with the manufacturer's instructions.
Fixed Height Eurogully Locate the gully in the correct position in the floor and connect to the drainage pipework system. The levelling feet fitted to the gully should be used to adjust the height of the unit. An M8 stud/nut arrangement is provided to enable electrical earth connections to be made if the installation requires this facility. For vinyl sheet flooring applications, firstly remove the PVC infill from the underside of the gully top by applying a gentle heat (approx. 70°C) to the top edge detail to break the adhesive bond allowing the infill to be released.
Earth Stud
Sealant PVC Infill
Levellin Foot Resin or Cement Grout
Basket
Fit the ACO Building Drainage Vinyl SealÂŽ rigid PVC co-extrusion to the gully top in accordance with the procedure detailed on page 48. Backfill around the gully and dress floor finish up to the gully edge. Remove any protective tape/film from the unit. A mastic sealant of bead width 5-8mm is recommended around the outside of the gully top edge and floor finish where a good watertight seal is required between the two materials. Ensure the sealant is applied in accordance with the manufacturer's instructions.
40
Floor Finish
Pipework System
Installation
Telescopic Eurogullies
Earth Studs
PVC Infill Sealant Floor Finish
Connect the gully body spigot outlet to the drainage pipework.
Position the gully top over the gully body and fit either the sealing ring when no membrane is present or the drainage ring when a membrane is used. Adjust the gully top for height and orientation using the levelling feet provided. An M8 stud/nut arrangement is provided on the gully body and top to enable electrical earth connections to be made if the installation requires this facility. For vinyl sheet flooring applications, first remove the PVC infill from the underside of the gully top by applying a gentle heat (approx. 70°C) to the top edge detail to break the adhesive bond allowing the infill to be released. Fit the ACO Building Drainage Vinyl SealŽ rigid PVC co-extrusion to the gully top in accordance with the procedure detailed on page 48.
Min 45mm Max 150mm
Flange
Sealing Ring Pipework System
If used in conjunction with a membrane, bond or clamp the sub-surface membrane to the flange plate of the gully body and cut out the membrane within the inner diameter of the flange plate. To prevent debris from falling into the gully, only remove the temporary gully body covers when ready to fit either the gully top or channel system.
Gully Top
Resin or Cement Grout
Spigot Outlet
Basket
Body
Channel Basket
Resin or Cement Grout
Flange
Raising Piece
Sealing Ring
Draning Ring Clamping Flange
DPC Membrane
Back fill around the gully top and dress floor finish to edge. Remove any protective tape and install sieve/silt basket as required.
Resin or Cement Grout
A mastic sealant of bead width 5-8mm is recommended around the outside of the gully top edge and floor finish where a good watertight seal is required between two materials. Ensure the sealant is applied in accordance with the manufacturer’s instructions.
Body
Pipework System
41
Installation ACO VINYL SEAL®
Sealing vinyl sheet flooring to drainage channels and gullies Vinyl sheet is a common flooring finish in many of the areas where stainless steel drainage channels and gullies are required. Previously the standard method of jointing the two was by a mechanical clamping system.
Cut the ACO Building Drainage Vinyl Seal® rigid PVC co-extrusion to the required lengths to fit exactly round all edges of the assembled channel – do not forget to allow for the mitred ends. Cut and notch the extrusion to form internal and external mitres as required.
Although functional, this mechanical clamping mechanism can be cumbersome to fit and increase the potential areas for bacterial growth. In order to overcome the frequently encountered problems of achieving watertight and bacteria free seals, ACO have developed the ACO Building Drainage Vinyl Seal a unique solution that will enable quick, easy and economical installation. ACO Building Drainage Vinyl Seal® provides a completely watertight and bacteria free seal. It can be also easily removed and re-sealed when the vinyl is replaced or refurbished without the need to disturb the channel or supporting detail in any way.
Press the rigid extrusion into the recess at the edge of the channel ensuring it is pushed fully home. Peel back the fabric tape protecting the channel edge in preparation for fitting the flexible PVC seal.
This method of sealing requires no additional tools or skills than those required for the professional fitting of vinyl sheet flooring, making the installation quick, easy and economical. The seal is significantly more cost effective than the traditional mechanical type and is designed to fit ACO Building Drainage stainless steel drainage channels.
42
Press the flexible PVC seal into position between the stainless steel channel and rigid PVC extrusion making sure that the concave section of the seal faces TOWARDS the channel edge and that the groove in the flexible seal engages with the notch on the rigid extrusion (it may help to lubricate the flexible seal when inserting using a soapy solution). For an even finish roll the flexible seal in to position using a small decorators roller.
Installation ACO VINYL SEAL速
Ensure the assembled ridged and flexible Vinyl Seal速 sits square and horizontal in the channel
Grout any voids at connecting rigid PVC joins at mitred corners, straight joints or fixings to ensure a continuous supported floor finish. Prior to laying the vinyl sheet flooring, peel the protective film from the rigid extrusion (a knife may be required to cut the film adjacent to the flexible seal) and ensure all surfaces are clean and dry.
detail Install the channel into the ground ensuring that the flooring screed is flush to the top edge of the rigid PVC extrusion. Protect the channel and seal assembly from splashes of concrete/screed.
When preparing the vinyl sheet material and floor surface, apply a compatible adhesive also to the top surface of the rigid PVC extrusion for example, Altrofix 19 two-part water resistant eurethane adhesive taking care not to apply adhesive to the flexible seal. This is to ensure the vinyl sheet floor is reliably anchored over its full area. Cut/lay the sheet flooring against the flexible seal edge and prepare the welded joint between the flexible seal and vinyl sheet flooring as normal by scoring the sheet/seal joint to approximately half the depth of the sheet flooring thickness.
Depending upon the installation, additional suitable fixings may be required to secure the rigid extrusion to the floor substrate. If this should be required, separately drill and countersink the rigid extrusion making sure that all fixings are finished flush with the top of the extrusion.
Either in-colour or black welding filler rod may be used to weld the joint. Remove surplus weld material from the joint using a spatula when the welded joint has cooled.
43
Installation CARE AND MAINTENANCE
Although robust, all grades of stainless steel will stain and discolour due to surface deposits and, as such, can never be accepted as completely maintenance free. In order to achieve maximum corrosion resistance, the surface of the stainless steel must be kept clean. Provided the grade of stainless steel and the surface finish are correctly selected, and cleaning schedules carried out on a regular basis, excellent performance and long service life are assured.
Maintenance Programme
Factors Affecting Maintenance
With care taken during fabrication and installation, cleaning before handing over to the client should present no special problems, although more attention may be required if the installation period has been prolonged.
Surface contamination and the formation of deposits must be prevented in order to maintain a durable and hygienic surface.
Where surface contamination is suspected, immediate attention to cleaning after site fixing will encourage a trouble free product.
These deposits may be minute particles of iron or rust from other sources used on the building of new premises and not removed until after the stainless steel drainage products have been installed. Wire brushes and wire wool must not be used to remove marks and cement spillages as this will only serve to introduce iron impurities to the material surface. Care must also be taken when storing, erecting or cutting carbon steel near to stainless steel.
Food and beverage handling, pharmaceutical and chemical industry applications require extremely high levels of cleanliness applicable to each industry.
Industrial and even naturally occurring atmospheric conditions can produce deposits which can be equally corrosive, e.g. salt deposits from marine conditions. The working environment can offer more aggressive conditions, for example the high humidity found in swimming pools increases the speed of discolouration and therefore requires maintenance on a more frequent basis. Modern processes use many cleaners, sterilisers and bleaches for hygienic purposes. All these proprietary solutions, when used in accordance with makers instructions are safe, but if used incorrectly (e.g.warm or concentrated) can cause discolouration and corrosion on the surface of any quality of stainless steel.
44
Strong acid solutions are sometimes used to clean masonry and tiling of buildings but they should never be permitted to come into contact with metals, including stainless steel. If this should happen the acid solution must be removed immediately by copious applications of water.
Advice is often sought concerning the frequency of cleaning stainless steel and the answer is quite simple: clean the metal when it is dirty in order to restore its original appearance. This may vary from once to four times a year for external applications or it may be once a day for an item in hygienic or aggressive situations. Frequency and cost of cleaning is lower with stainless steel than with many other materials, and will often outweigh the initial higher cost of this superior product.
Installation CARE AND MAINTENANCE
Cleaning Methods
Conclusion
Stainless steel is easy to clean. Washing with soap or a mild detergent and warm water followed by a clear water rinse is usually quite adequate for many industrial applications. An enhanced aesthetic appearance will be achieved if the cleaned surface is finally wiped dry.
If all the suggestions and actions in the table below have been attempted, stainless steel has the facility to be mechanically cleaned by specialists on site. Please contact ACO Building Drainage for further assistance.
Precautions Acids should only be used for on-site cleaning when all other methods have been proved unsatisfactory. Rubber gloves should be used and care taken to see that acid cleaners are not spilt over adjacent areas. Special precautions are necessary with oxalic acid. Solvents should not be used in closed places without adequate ventilation. Smoking must be avoided when using solvent. Manufacturer’s directions should be followed. Problem Routine cleaning, all finishes.
Fingerprints, all finishes.
Stubborn stains and discolouration.
Oil and grease marks, all finishes.
Rust and other corrosion products.
Cleaning Agent
Comment
Soap or mild detergent and water
Sponge, rinse with clean water, wipe
(such as washing up liquid).
dry if necessary.
Soap or warm water or organic
Rinse with clean water, wipe dry
solvent (e.g.acetone, alcohol).
if necessary.
Mild cleaning solutions (e.g. Jif,
Rinse well with clean water and
Goddard Stainless Steel Care).
wipe dry.
Organic solvents (e.g. acetone,
Clean after with soap and water, rinse
alcohol, trichloroethylene).
with clean water and dry.
Oxalic acid. The cleaning solution
Rinse well with clean water
should be applied with a swab
(precautions for acid cleaners should
and allowed to stand for 15–20
be observed).
minutes before being washed away with water. May continue using Jif to give final clean. Scratches on Brush (Satin) finish.
Household synthetic fibre scouring
Do not use ordinary steel wool (iron
pads (e.g. Scotch Brite fibre pad).
particles can become embedded in
For deeper scratches; apply in direction of polishing. Then clean
stainless steel and cause further surface problems).
with soap or detergent as per routine cleaning.
45
Stainless Steel FAMILIES
Stainless steel is the name given to a wide range of steels which have the characteristics of greatly enhanced corrosion resistance over conventional mild and low alloy steels. The enhanced corrosion resistance of stainless steel essentially comes from the addition of at least 11% chromium, however most stainless steels commonly used contain around 18% chromium. Other significant alloying elements include nickel and for superior corrosion resistant properties, molybdenum. For ACO Building Drainage applications, the principal properties of stainless steel may be summarised as follows:
Durable and corrosion resistant in highly aggressive environments.
Hygienic, easily cleaned surfaces.
Aesthetically attractive surface finish.
Good forming and fabrication characteristics.
Excellent strength and resistance to oxidisation at high temperatures.
All of which make stainless steel an obvious first choice material for demanding applications.
Stainless Steel Families Stainless steel is used across a wide spectrum of engineering applications and this has led to the development of the vast range of different types of stainless steels that are now available. There are four main grades of stainless steel: Austenitic Stainless Steels This group of stainless steels is the most widely used and encompasses the generic 304 and 316 grades of material. These materials are used in the ACO Building Drainage manufacturing process and are ideal for applications including food processing, dairy, brewing, pharmaceutical, chemical and petrochemical industries. 304 grade stainless steels contain around 18% chromium and 10% nickel and provides excellent corrosion resistance. For applications where superior corrosion resistance properties are required under extreme conditions particularly where chlorides are involved, 316 grade stainless steels are used and contain around 17% chromium, 12% nickel and 2.2% molybdenum. Unlike all other grades of stainless steels, austenitic grades are non-magnetic and as a consequence magnetic particles are not attracted to the system surfaces which otherwise would encourage both contamination and corrosion. Ferritic Stainless Steels Ferritic stainless steels have inferior corrosion resistance properties compared to austenitic 304 and 316 grades and are used in less demanding applications such as domestic appliance and motor car trim.This grade of stainless steel is slightly more brittle when compared to austenitic grades. Ferritic steels contain between 11.5% and 16.5% chromium and less than 0.5% nickel. This group of steels are magnetic and will attract particulates which can cause contamination problems. Ferritic steels are not suitable for drainage products.
46
Stainless Steel FAMILIES AND CORROSION RESISTANCE
Martensitic Stainless Steels Martensitic steels are magnetic and have the highest strength of the groups of stainless steels, however they also have the poorest corrosion resistance. They can be hardened by heat treatment and generally find their main application in cutlery manufacture. Martensitic steels contain around 12.5% chromium and contain a relatively high carbon content of 0.3% (austenitic and ferritic steels contain around 0.02% and 0.04% carbon respectively). Martensitic steels’ poor corrosion resistance make them unsuitable for drainage applications. Duplex Stainless Steels Duplex stainless steels have an effective austenitic/ferritic structure and are characterised by good corrosion resistance, high strength and in particular, good resistance to stress corrosion cracking. Duplex steels contain around 22% chromium, 5.5% nickel, 3% molybdenum and 0.02% carbon. This group of steels are magnetic and will attract particulates which can cause contamination problems and therefore are unsuitable for drainage applications.
Stainless Steel Corrosion Resistance The single most important property of stainless steels and the reason for their existence and widespread use, is their natural corrosion resistance. In spite of their name, stainless steels can both ‘stain’ and corrode if used incorrectly. The reason for the good corrosion properties is due to the formation of a very thin, invisible oxide film that forms on the surface of the material in oxidising environments such as the atmosphere and water.
This film is a chromium-rich oxide which protects the steel from attack in aggressive environments. As chromium is added to a steel, a rapid reduction in the corrosion rate is observed because of this protective film. In order to obtain a compact and continuous passive film, a chromium content of at least 11% is required. Passivity increases fairly rapidly with increasing chromium content up to about 17% chromium. The most important alloying element is therefore chromium, but a number of other elements including nickel, molybdenum and nitrogen also contribute to the corrosion resistance properties of stainless steels. Other alloying elements may also be added to enhance the corrosion resistance in particular environments. Stainless steels must oxidise in order to form the passive, chromium-rich oxide film. Stainless steels have a very strong tendency to passivate and only a small amount of oxidising agents are needed for passivation - air and water are sufficient to passivate stainless steels and indeed, this oxide film is spontaneously regenerated when exposed to oxygen. An important factor to note is that the passive film is self-healing, so when the material is cut or machined or, should chemical or mechanical damage occur, the passive film will ‘heal’ or repassivate in oxidising environments - unlike a painted finish on mild steel. Selection of the correct grade of material for each application is an important factor in the design process. It is important to note that even 316 grades of stainless steel are not immune to all kinds of chemical attack; use with reducing solutions, such as hydrochloric and oxalic acids particularly when in concentrated and/or hot form, requires careful consideration. See material resistance chart on pages 8 and 9.
47
Stainless Steel FINISHING PROCESSES
Stainless Steel Finishing Processes A stainless steel finish should appear clean, smooth and faultless. This is obvious when the steel is used for such purposes demanding stringent hygiene or decorative trim applications, but a fine surface finish is also crucial in respect to its corrosion resistant properties. The corrosion resistance properties of stainless steel are achieved by the spontaneous formation of a very thin chromium-rich oxide layer over the surface of the material. Unfortunately, surface defects and imperfections introduced during the manufacturing process may drastically disturb the self healing process of the passive layer and subsequently reduce the corrosion resistance of the material. In the manufacturing process it is the welding that creates the greatest challenge to corrosion resistance. All ACO Building Drainage products are subjected to specialised treatment to ensure the material retains the maximum resistance to corrosion. Pickle Passivation Plant
Untreated Stainless Steel The blue oxide film has substantially reduced corrosion resistance.
After welding stainless steel, a bluish high temperature oxide film can be seen which has substantially inferior corrosion protection properties compared to the original passive layer. Immediately beneath this blue oxide film is a thin layer of chromium depleted metal which makes the metal surface susceptible to corrosion. Post weld treatment is, therefore, very important to restore the corrosion protection properties and is effectively achieved by removing the blue high temperature oxide film and chromium depleted layer to restore the surface of the material. This ‘cleaning’ is essentially a controlled corrosion process using chemicals, this will restore not only its original corrosion resistance performance but also the high quality aesthetics. The chemical processing methods used in the ACO Building Drainage process are summarised as follows:
ACO resources include the largest pickle passivation plant in Europe
48
Stainless Steel FINISHING PROCESSES
Pickle Passivation
Electropolishing
The standard ACO Building Drainage manufacturing process uses the pickle passivation chemical finishing process to restore the products to their full optimum corrosion resistant state without damaging the surface finish. This is considered the best method for cleaning welded joints.
Electropolishing is ideal for producing a uniform, highly reflective lustre with an extremely smooth finish even on the most complex product contours. This is a well proven method of polishing and is achieved by an electro-chemical process which is essentially the reverse of electroplating.
Pickle passivation is a two-phase process.
Electropolishing. Pickle Passivation Process.
Electropolishing further enhances surface smoothness and provides a brighter surface appearance.
Pickle Passivation restores corrosion resistance properties fully.
Pickling removes both the bluish high temperature oxide film and the chromium depleted layer and is achieved by placing the components in a pickling bath containing a mixture of nitric acid and hydrofluoric acid. The second phase is passivation and in many ways is similar to the pickling process. For this process the components are placed in a bath containing nitric acid only. This treatment strengthens the passive layer and also removes any iron impurities that may have become embedded in the surface of the stainless steel during the manufacturing process. This treatment is important where mechanical cleaning of the components has taken place with the use of wire brushes, grinding wheels and files where iron particles from other materials may contaminate the stainless steel surface.
The components are immersed in a bath of electrolyte containing phosphoric acid where the components become the anode of a direct current electrical circuit. The process is characterised by the selective attack on the surface of the components whereby upstanding roughnesses are preferentially dissolved and will yield a progressively smoother, brighter surface. For pharmaceutical and food processing industries, bacterial resistance is considerably improved by the electropolishing process. Certain gratings within the ACO Building Drainage range are electropolished as standard. All stainless steel products can be electropolished if required to special order.
49
Stainless Steel MATERIAL RESISTANCE CHART
The resistance information contained within this table is indicative only. All data is based on reactions noted at an ambient temperature of 20째C. Higher temperatures will generally reduce the corrosion resistance of the materials. Please contact ACO Building Drainage if guarantees are required of specific material suitability. Reagent
Recommended
?
Suitable. However, contact ACO Building Drainage for further advice.
d Not recommended
~
No data available
Stainless Steel 304
Stainless Steel 316
EPDM
Acetic Acid 20%
Carbon Tetrachloride
Acetic Acid 80%
d
Caustic Potash
Acetone
Caustic Soda
Alcohol (Methyl or Ethyl)
Chloride (Dry)
Aluminium Chloride
?
?
Chloride (Wet)
Aluminium Sulphate
Ammonia Gas (Dry)
~
Ammonium Chloride
?
?
Ammonium Hydroxide
Reagent
Stainless Steel 304
Stainless Steel 316
EPDM
Neoprene Gasket
?
?
d
d
~
? d d
Chloraocetic Acid
? d d
Chlorobenzene
Chloroform Chrome Acid 50%
? d
? d
d ? d d ? d
d d d d d d d
Chromic Acid 10%
Ammonium Phosphate
Citric Acid
?
Copper Chloride
Ammonium Sulphide
~
Copper Cyanide
Amyl Chloride
Copper Nitrate
~
Aniline
d ?
~ ~
d d
Ammonium Sulphate
? d
d
Copper Sulphate
Barium Chloride
Cottonseed Oil
~ ~ ~ ~ ~ ~ ~
d d ?
Cresol
d d
Ammonium Nitrate
Barium Sulphate
Cyclohexanone
Barium Sulphide
~
~
Cyclorexanol
Beer
Dimethyleanine
Beet Sugar Liquors
Dionylphalate
Benzene
d d
d
Disodium Phosphate
~ ~ ~ ~ ~ ~ ~
Distilled Water
d
Ethyl Acetate
? d
Ethylene Chloride
d
Ethylene Glycol
Fatty acids (Cb)
d
Ferric Sulphate
Fluorene Gas (wet)
d
d
d
Formaldehyde (37%)
d
Barium Hydroxide 10%
~
~
Benzoic Acid
Bleach -12.5%Active C1
~
~
Boric Acid
Bromic Acid
? d
~ ~
~
Bromine Water
? d
d
Butane
d
Calcium Carbonate
Calcium Chloride
?
Calcium Hypochlorite
d ? d
?
?
Calcium Sulphate
Cane Sugar Liquors
~ ~
~ ~
~
d
d
Carbon Dioxide
Carbon Monoxide
Calcium Hydroxide
Carbon Acid Carbon Bisulphide
50
Neoprene Gasket
We shall arrange for tests to be undertaken with the reagent to establish the chemical resistance of the materials. Other gasket and sealing ring materials are available. Please contact us for further information.
Formic Acid (90%)
d ? ?
~
Freon 12
~
~
Fruit Juices &Pulp
?
~
Furfural
~
~
d
Gasoline (Refined)
~
~
d
Glucose
Glycerine
Stainless Steel MATERIAL RESISTANCE CHART
Reagent
Stainless Steel 304
Stainless Steel 316
EPDM
Neoprene Gasket
Reagent
Stainless Steel 304
Stainless Steel 316
EPDM
Neoprene Gasket
d d
d
Sea Water Sewerage
? ?
d ?
Hydrochloric Acid (40%) d
Silver Nitrate
d d d
Silver Sulphate
Sodium Bicarbonate
Sodium Bisulphite
d
Sodium Carbonate
Sodium Cyanide
~ ~
Sodium Ferrocyanide
~ ~
Hydrobromic Acid (20%)d
d
?
d ? d d d ?
Kerosene
d
Lactic Acid 25%
Sodium Hydroxide
Hydrocyanic Acid
Hydrogen Peroxide (90%)
~ ~
~ ~
Hydroquinone Hypochlorous Acid Iodine
Linseed Oil
Sodium Hypochlorite
?
~
?
~
d ?
Liqueurs
d
Sodium Sulphate
Magnesium Chloride
?
?
Sodium Sulphide
? ?
Sodium Sulphite
d d
Sodium Thiosulphate
d
Stannous Chloride
?
?
Stearic Acid
Sulphite Liquor
~
~
Sulphurous Acid
?
d ? ? ?
Sulphur
~
d
d d d
? ? ?
d
Magnesium Sulphate
Methyl Chloride
? ?
? ?
Methyl Ethyl Ketone
~
~
Milk
Minerals Oils
~
~
Muriatic Acid Nickel Chloride
d ?
d ?
Nickel Sulphate
Oils and Fats
?
Sulphuric Acid 70%
Oleic Acid
Oleum
~
~
Sulphuric Acid 93%
? ? ? ? d d d
Oxalic Acid
?
?
Tannic Acid
~
Palmitic Acid 10%
~
Tanning Liquors Tarianc Acid
Perchloric Acid 10%
d d
Toluene
d
~ ~
Trichloroethylene
Petroleum Oils (Sour)
Trisodium Phosphate
Phosphorous Trichloride
d
~ ~
d d
Triethanolamine
~ ~
? d d
Phenol 5%
? ? d ?
Perchloric Acid 70%
d d
~ ~
Turpentine
d
d d
Urea
Urine
Maleic Acid
d ?
Sulphur Dioxide (Dry) Sulphur Dioxide (Wet) Sulphuric Acid 50%
d
Photographic Solutions
?
Picric Acid
Plating Solutions
~
~
d
Potassium Carbonate
Vinegar
Potassium Chloride
Water (Fresh)
Potassium Cyanide
Water (Mine)
Potassium Dichromate
Water (Salt)
Potassium Hydroxide
Whisky
Potassium Permanganate
Wines
Potassium Sulphate
Propane Gas
~ ~
~ ~
~
Xylene
~
~
d
d
d
Propyl Alcohol
Zinc Chloride Zinc Sulphate
d ?
51
ACO Technologies plc ACO Business Park, Hitchin Road, Shefford, Bedfordshire SG17 5TE Tel: 01462 816666 Fax: 01462 851490 e-mail: buildingdrainage@aco.co.uk website: www.acobuildingdrainage.co.uk
Š November 2007 ACO Technologies plc. All reasonable care has been taken in compiling the information in this document. All recommendations and suggestions on the use of ACO products are made without guarantee since the conditions of use are beyond the control of the Company. It is the customer's responsibility to ensure that each product is fit for its intended purpose, and that the actual conditions of use are suitable. This brochure and any advice is provided by ACO Technologies plc (the Company) free of charge and accordingly on terms that no liability including liability for negligence will attach to the Company or its servants or agents arising out of or in connection with or in relation to this brochure or any such advice. Any goods supplied by the Company will be supplied solely upon its standard conditions of sale, copies of which are available on request. The Company's policy of continuous product development and improvement renders specifications liable to modification. Information provided in this brochure is therefore subject to change without prior notification.
PC20368