DYNA FLEX Thermoplastic Hose Catalog TABLE OF CONTENTS DESCRIPTION
PAGE
Thermoplastic Hose Specifications SAE100R7 (single line, non-conductive, twinline) SAE100R8 (single line, non-conductive, twinline) Sewer Jetting Paint Spray
4 8 12 14
Couplings Crimp Ferrules NPTF Male Pipe JIC 37 Degree Solid Male JIC 37Degree Swivel Female, JIC 37Degree Swivel Female 90 JIC 37Degree Swivel Female 45 BSPP Male Parallel BSPT Male Parallel BSPP Swivel Female BSPP Swivel Female 45 & 90 Degree Metric Stud Male Light, Metric Female Swivel Light Metric Female Swivel Light 45 & 90 Degree Metric Stud Male Heavy, Metric Female Swivel Heavy Metric Female Swivel Heavy 45 & 90 Degree JIS Komatsu Female & JIS Komatsu BSP Female ORFS Female & Male O-Ring Boss ORFS Female 45 and 90 degree swivel Male O-ring Boss Swivel 90 & NPSM Swivel Female Blank Insert & Hose Mender Banjo BSP & Banjo Metric Metric Standpipe Metric Standpipe 90 Metric Standpipe 45
18 19 20 21
22 23
24 25 26
27 28 29 30 31 32 33 34 35 36
37 38 39
Page 2
Hose Mender Karcher Fitting
Crimper
40 41
D105QK Hydraulic Hose Crimper
42
Print Catalog Request Form
43
Page 3
DYNA FLEX
SAE 100R7 711 (BLACK)
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. For pneumatic systems use perforated (pin-pricked) hose. Innercore: Synthetic oil resistant polyester tube Reinforcement: Braided high tensile synthetic fiber Cover: Black high abrasion resistant polyurethane Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
701-02* 711-03 711-04 711-05 711-06 711-08 711-12 711-16
Nominal I.D.
Nominal O.D.
Maximum Oper. Press.
Minimum Burst Press.
In.
mm.
In.
mm.
PSI
PSI
1/8 3/16 1/4 5/16 3/8 1/2 3/4 1
3.18 4.76 6.35 7.94 9.53 12.70 19.05 25.40
.305 .405 .505 .585 .645 .810 1.11 1.42
7.75 10.29 12.83 14.86 16.38 20.57 28.19 36.07
3,000 3,250 3,000 2,500 2,250 2,000 1,250 1,000
BAR 207 224 207 172 155 138 86 69
12,000 13,000 12,000 10,000 9,000 8,000 5,000 4,000
Min. Bend Radius BAR (In.) 827 896 827 689 620 552 345 276
1/2 3/4 1-1/4 1-3/4 2 3 9-1/2 12
Wgt. Per 100 Ft. (Lbs.) 2.5 5.5 7.0 10.0 10.5 15.0 29.0 40.0
* 1/8� I.D. does not apply to SAE100R7
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 4
DYNA FLEX
SAE 100R7 7110 (ORANGE) NON-CONDUCTIVE
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. For pneumatic systems, use perforated (pin-pricked) hose. Innercore: Synthetic oil resistant polyester tube Reinforcement: Braided high tensile synthetic fiber Cover: Orange non-conductive high abrasion resistant polyurethane Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
7010-02* 7110-03 7110-04 7110-05 7110-06 7110-08 7110-12 7110-16
Nominal I.D.
Nominal O.D.
Maximum Oper. Press.
Minimum Burst Press.
In.
mm.
In.
mm.
PSI
PSI
1/8 3/16 1/4 5/16 3/8 1/2 3/4 1
3.18 4.76 6.35 7.94 9.53 12.70 19.05 25.40
.305 .405 .505 .585 .645 .810 1.11 1.42
7.75 10.29 12.83 14.86 16.38 20.57 28.19 36.07
3,000 3,250 3,000 2,500 2,250 2,000 1,250 1,000
BAR 207 224 207 172 155 138 86 69
12,000 13,000 12,000 10,000 9,000 8,000 5,000 4,000
Min. Bend Radius BAR (In.) 827 896 827 689 620 552 345 276
1/2 3/4 1-1/4 1-3/4 2 3 9-1/2 12
Wgt. Per 100 Ft. (Lbs.) 2.5 5.5 7.0 10.0 10.5 15.0 29.0 40.0
* 1/8� I.D. does not apply to SAE100R7
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 5
DYNA FLEX
SAE 100R7 TWIN-LINE 711T (BLACK) TWIN-LINE
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R7 requirements. For pneumatic systems, use perforated (pin-pricked) hose. Innercore: Synthetic oil resistant polyester tube Reinforcement: Braided high tensile synthetic fiber Cover: Black high abrasion resistant polyurethane Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
711-03T 711-04T 711-06T 711-08T
Nominal I.D.
Nominal O.D.
Maximum Oper. Press.
Minimum Burst Press.
In.
mm.
In.
mm.
PSI
PSI
3/16 1/4 3/8 1/2
4.76 6.35 9.53 12.70
.400 .505 .645 .810
10.16 12.83 16.38 20.57
3,250 3,000 2,250 2,000
BAR 224 207 155 138
13,000 12,000 9,000 8,000
Min. Bend Radius BAR (In.) 896 827 620 552
3/4 1-1/4 2 3
Wgt. Per 100 Ft. (Lbs.) 11 14 21 30
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 6
DYNA FLEX
SAE 100R8 TWIN-LINE
8110T (ORANGE) NONCONDUCTIVE TWIN-LINE
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R8 requirements. For pneumatic systems use perforated (pin-pricked) hose. Innercore: Synthetic oil resistant polyester tube Reinforcement: Braided high tensile aramid fiber Cover: Orange high abrasion resistant polyurethane Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
8110-03T 8110-04T 8110-06T 8110-08T
Minimum Min. Burst Press. Bend Radius (In.) BAR PSI BAR
Nominal I.D.
Nominal O.D.
Maximum Oper. Press.
In.
In.
PSI
mm.
3/16 4.76 1/4 6.35 3/8 9.53 1/2 12.70
mm.
.390 9.91 5,000 .480 12.19 5,000 .645 16.38 4,000 .810 20.57 3,500
345 345 276 241
20,000 20,000 16,000 14,000
1397 1379 1103 965
3/4 1-1/4 2 3
Wgt. Per 100 Ft. (Lbs.) 5.5 7.0 10.5 15.0
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 7
DYNA FLEX
SAE 100R8 811 (BLACK)
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R8 requirements. For pneumatic systems use perforated (pin-pricked) hose. Innercore: Synthetic oil resistant polyester tube Reinforcement: Braided high tensile aramid fiber Cover: Black high abrasion resistant polyurethane Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
811-03 811-04 811-06 811-08
Minimum Min. Burst Press. Bend Radius (In.) BAR PSI BAR
Nominal I.D.
Nominal O.D.
Maximum Oper. Press.
In.
In.
PSI
mm.
3/16 4.76 1/4 6.35 3/8 9.53 1/2 12.70
mm.
.390 9.91 5,000 .480 12.19 5,000 .645 16.38 4,000 .810 20.57 3,500
345 345 276 241
20,000 20,000 16,000 14,000
1397 1379 1103 965
3/4 1-1/4 2 3
Wgt. Per 100 Ft. (Lbs.) 5.5 7.0 10.5 15.0
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 8
DYNA FLEX
SAE 100R8 TWIN-LINE
8110T (ORANGE) NONCONDUCTIVE TWIN-LINE
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R8 requirements. For pneumatic systems use perforated (pin-pricked) hose. Innercore: Synthetic oil resistant polyester tube Reinforcement: Braided high tensile aramid fiber Cover: Orange high abrasion resistant polyurethane Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
8110-03T 8110-04T 8110-06T 8110-08T
Minimum Min. Burst Press. Bend Radius (In.) BAR PSI BAR
Nominal I.D.
Nominal O.D.
Maximum Oper. Press.
In.
In.
PSI
mm.
3/16 4.76 1/4 6.35 3/8 9.53 1/2 12.70
mm.
.390 9.91 5,000 .480 12.19 5,000 .645 16.38 4,000 .810 20.57 3,500
345 345 276 241
20,000 20,000 16,000 14,000
1397 1379 1103 965
3/4 1-1/4 2 3
Wgt. Per 100 Ft. (Lbs.) 5.5 7.0 10.5 15.0
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 9
DYNA FLEX
SAE 100R8 8110 (ORANGE) NONCONDUCTIVE
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R8 requirements. For pneumatic systems use perforated (pin-pricked) hose. Innercore: Synthetic oil resistant polyester tube Reinforcement: Braided high tensile aramid fiber Cover: Orange high abrasion resistant polyurethane Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
8110-03 8110-04 8110-06 8110-08
Nominal I.D.
Nominal O.D.
Maximum Oper. Press.
In.
In.
PSI
mm.
3/16 4.76 1/4 6.35 3/8 9.53 1/2 12.70
mm.
.390 9.91 5,000 .480 12.19 5,000 .645 16.38 4,000 .810 20.57 3,500
Minimum Burst Press.
BAR PSI 345 345 276 241
20,000 20,000 16,000 14,000
Min. Bend Radius (In.)
Wgt. Per 100 Ft. (Lbs.)
3/4 1-1/4 2 3
5.5 7.0 10.5 15.0
BAR 1397 1379 1103 965
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 10
DYNA FLEX
SAE 100R8 TWIN-LINE 811T (BLACK) TWIN-LINE
Recommended For: Medium pressure hydraulic and pneumatic systems. Meets or exceeds SAE 100R8 requirements. For pneumatic systems use perforated (pin-pricked) hose. Innercore: Synthetic oil resistant polyester tube Reinforcement: Braided high tensile aramid fiber Cover: Black high abrasion resistant polyurethane Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
811-03T 811-04T 811-06T 811-08T
Minimum Min. Burst Press. Bend Radius (In.) BAR PSI BAR
Nominal I.D.
Nominal O.D.
Maximum Oper. Press.
In.
In.
PSI
mm.
3/16 4.76 1/4 6.35 3/8 9.53 1/2 12.70
mm.
.390 9.91 5,000 .480 12.19 5,000 .645 16.38 4,000 .810 20.57 3,500
345 345 276 241
20,000 20,000 16,000 14,000
1397 1379 1103 965
3/4 1-1/4 2 3
Wgt. Per 100 Ft. (Lbs.) 5.5 7.0 10.5 15.0
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com Page 11
DYNA FLEX
SEWER JETTING SWRB (BLACK)
Recommended For: Use on high pressure sewer cleaning and jetting equipment. Innercore: Seamless polyester elastomer tube Reinforcement: Braided high tensile aramid fiber Cover: Black high abrasion resistant polyurethane Temperature Range: -40 degrees F. to +122 degrees F. (-40 degrees C. to +50 degrees C.)
Hose Part No.
SWRB-03 SWRB-04 SWRB-06 SWRB-08
Nominal I.D.
Nominal O.D.
Minimum Maximum Oper. Press. Burst Press.
In.
mm.
In.
mm.
PSI
3/16 1/4 3/8 1/2
4.76 6.35 9.53 12.70
.390 .480 .645 .810
9.91 12.19 16.38 20.57
5,000 5,000 4,000 4,000
BAR 345 345 276 241
PSI
Min. Bend Radius BAR (In.)
20,000 20,000 16,000 14,000
1397 1379 1103 965
3/4 1-1/4 2 3
Wgt. Per 100 Ft. (Lbs.) 5.5 7.0 10.5 15.0
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 12
DYNA FLEX INC.
Sewer Cleaning Hose
SWRO
Recommended For: Use on high pressure sewer cleaning and jetting equipment. Innercore: Orange, seamless elastomer tube Reinforcement: Braided high tensile synthetic fiber Cover: Orange high abrasion resistant polyurethane Temperature Range: -40 degrees F. to +122 degrees F. (-40 degrees C. to +50 degrees C.)
Hose Part No.
SWRO-16
Min. Bend Radius BAR (In.)
Nominal I.D.
Nominal O.D.
Maximum Minimum Oper. Press. Burst Press.
In.
mm.
In.
mm.
PSI
25.40
1.44
36.58
2,500
1
BAR 172
PSI 6,250
431
6
Wgt. Per 100 Ft. (Lbs.) 40.0
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 13
DYNA FLEX
PAINT SPRAY 7100 (NU-BLU) ®
Recommended For: Use in Airless/Wireless paint spray applications Innercore: Nylon (Flexible) Reinforcement: Braided high tensile conductive synthetic fiber Cover: Blue high abrasion resistant polyurethane Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
7100-03 7100-04 7100-06 7100-08
Nominal I.D.
Nominal O.D.
Maximum Oper. Press.
In.
In.
mm.
PSI
.405 .505 .645 .810
10.29 12.83 16.38 20.57
3/16 1/4 3/8 1/2
mm. 4.76 6.35 9.53 12.70
3,300 3,300 3,300 2,000
BAR 227 227 227 138
Min. Bend Radius (In.)
Wgt. Per 100 Ft. (Lbs.)
3/4 1-1/4 2 3
5.5 7.0 10.5 15.0
NOTE: Paint spray hose is furnished only as a completed assembly. Hose will be coiled and cut to length specified by customer. All hose assemblies come complete with hose ends, spring guards and “Warning Tags”. NOT TO BE USED WITH PUMPS OR EQUIPMENT THAT EXCEED THE MAXIMUM OPERATING PRESSURE. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com Page 14
DYNA FLEX
PAINT SPRAY 7102 (HI NU-BLUE TWO) ®
Recommended For: Use in Airless/Wireless paint spray applications Innercore: Nylon (Flexible) Reinforcement: Two braids high tensile conductive synthetic fiber Cover: Blue high abrasion resistant polyurethane Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
7102-03 7102-04 7102-06 7102-08
Nominal I.D.
Nominal O.D.
Maximum Oper. Press.
In.
In.
mm.
PSI
.405 .505 .645 .810
10.29 12.83 16.38 20.57
3/16 1/4 3/8 1/2
mm. 4.76 6.35 9.53 12.70
3,300 3,300 3,300 2,000
BAR 227 227 227 138
Min. Bend Radius (In.)
Wgt. Per 100 Ft. (Lbs.)
3/4 1-1/4 2 3
5.5 7.0 10.5 15.0
NOTE: Paint spray hose is furnished only as a completed assembly. Hose will be coiled and cut to length specified by customer. All hose assemblies come complete with hose ends, spring guards and “Warning Tags”. NOT TO BE USED WITH PUMPS OR EQUIPMENT THAT EXCEED THE MAXIMUM OPERATING PRESSURE. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com Page 15
DYNA FLEX
PAINT SPRAY 8100 (SUPR-NU SPRAY) ®
Recommended For: Use in Airless/Wireless paint spray applications. Lighter than comparable wire reinforced paint spray hoses. Innercore: Nylon (Flexible) Reinforcement: Braided high tensile conductive aramid fiber Cover: Red high abrasion resistant polyurethane Temperature Range: -65 degrees F. to +212 degrees F. (-54 degrees C. to +100 degrees C.) Hose Part No.
8100-03 8100-04 8100-06 8100-08
Nominal I.D.
Nominal O.D.
Maximum Oper. Press.
In.
mm.
In.
mm.
PSI
3/16 1/4 3/8 1/2
4.76 6.35 9.53 12.70
.390 .480 .645 .810
9.19 12.19 16.38 20.57
6,000 6,000 5,000 3,500
BAR 413 413 345 241
Min. Bend Radius (In.) 3/4 1-1/4 2 3
Wgt. Per 100 Ft. (Lbs.) 5.5 7.0 10.5 15.0
NOTE: Paint spray hose is furnished only as a completed assembly. Hose will be coiled and cut to length specified by customer. All hose assemblies come complete with hose ends, spring guards and “Warning Tags”. NOT TO BE USED WITH PUMPS OR EQUIPMENT THAT EXCEED THE MAXIMUM OPERATING PRESSURE. DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com Page 16
DYNA FLEX
Thermoplastic Hose and Fittings
Air and Pneumatic Applications: All hose assemblies should be perforated (pin-pricked) before being used in an air or gaseous application. This permits any gas that has migrated through the inner core to escape through the cover and into the atmosphere without causing damage to the hose. Please notify our sales staff if this is a requirement for your particular hose application.
Hose Conductivity & Non-Conductivity: Exercise caution when routing hydraulic hose by an electrical source. If you are close to an electrical source we highly recommend using Dyna Flex Inc. orange non-conductive hose.
Special Requirements: Hoses can be designed and constructed to meet your specific engineering needs. Please consult our sales staff for details
Page 17
DYNA FLEX
Thermoplastic Hose and Fittings
SAE100R7 AND SAE100R8 FERRULES
PART NO.
HOSE
"A"
"B"
"C"
I.D.
803 804 805 806 808 810 812 816
IN
MM
IN
MM
IN
MM
IN
MM
3/16 1/4 5/16 3/8 1/2 5/8 3/4 1
4.8 6.4 7.9 9.5 12.7 15.9 19 25.4
.551 .669 .748 .826 1.00 1.12 1.26 1.57
14.0 17.0 19.0 21.0 25.4 28.5 32.0 40.0
1.063 1.142 1.181 1.220 1.338 1.417 1.417 1.969
27.0 29.0 30.0 31.0 34.0 36.0 36.0 50.0
.417 .531 .598 .661 .819 .945 1.094 1.358
10.6 13.5 15.2 16.8 20.8 24.0 27.8 34.5
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com Page 18
DYNA FLEX
Thermoplastic Hose and Fittings
MALE PIPE PART NO.
2203-102 2204-104 2204-102 2204-104 2205-104 2205-106 2206-104 2206-106 2208-106 2208-108 2210-112 2212-112 2212-116 2216-116 2216-120 2220-120 2224-124 2232-132
HOSE I.D.
DASH SIZE
THREAD
HEX IN. "H"
CUTOFF IN. "C"
3/16 1/4 1/4 1/4 5/16 5/16 3/8 3/8 1/2 1/2 5/8 3/4 3/4 3/4 1 1-1/4 1-1/2 1
03 04 04 04 05 05 06 06 08 08 10 12 12 12 16 20 24 32
1/8-27 1/4-18 1/8-27 1/4-18 1/4-18 3/8-18 1/4-18 3/8-18 3/8-18 1/2-14 3/4-14 3/4-14 1-11-1/2 1-11-1/2 1-1/4-11-1/2 1-1/4-11-1/2 1-1/2-11-1/2 2-11-1/2
31/64 19/32 31/64 19/32 3/4 19/32 3/4 19/32 3/4 27/32 1-1/16 1-1/16 1-13/32 1-13/32 1-13/16 1-13/16 1-31/32 2-9/16
.866 1.062 .866 1.102 1.102 1.102 1.102 1.102 1.102 1.378 1.417 1.456 1.693 1.732 1.810 1.850 1.929 2.165
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com Page 19
DYNA FLEX
Thermoplastic Hose and Fittings MALE JIC
PART NO.
HOSE I.D.
DASH SIZE
THREAD
HEX IN. "H"
CUTO FF IN. "C"
2203-504 2204-504 2204-505 2204-506 2205-506 2206-506 2206-507SAE 2206-508 2206-510 2208-508 2208-510 2208-512 2210-510 2210-512 2212-510 2212-512 2212-514 2212-516 2216-512 2216-516
3/16 1/4 1/4 1/4 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 3/4 3/4 1 1
03 04 04 04 05 06 06 06 06 08 08 08 10 10 12 12 12 12 16 16
7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 9/16-18 5/8-18 3/4-16 7/8-14 3/4-16 7/8-14 1-1/16-12 7/8-14 1-1/16-12 7/8-14 1-1/16-12 1-3/16-12 1-5/16-12 1-1/16-12 1-5/16-12
31/64 31/64 9/16 19/32 19/32 19/32 11/16 3/4 15/16 3/4 15/16 1-1/16 15/16 1-1/16 15/16 1-1/16 1-1/4 1-11/32 1-1/16 1-11/32
1.023 1.062 1.062 1.062 1.062 1.062 1.062 1.181 1.338 1.220 1.378 1.456 1.378 1.456 1.417 1.496 1.614 1.654 1.535 1.693
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 E-Mail: sales@flexinc.com Web Site: www.dynaflexinc.com
Page 20
DYNA FLEX
Thermoplastic Hose and Fittings FEMALE JIC SWIVEL PART NO.
HOSE I.D. IN.
DAS H SIZ E
THREAD
HEX IN. "H"
CUTOFF IN. "C"
2202-6031PC* 2203-604 2204-604 2204-605 2204-606 2205-606 2206-606 2206-607 SAE 2206-608 2208-608 2208-610 2208-612 2210-610 2210-612 2212-612 2212-614 2212-616 2216-616
1/8 3/16 1/4 1/4 1/4 5/16 3/8 3/8
02 03 04 04 04 05 06 06
3/8-24 7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 9/16-18 5/8-18
9/16 19/32 9/16 11/16 11/16 11/16 3/4 3/4
.90 .512 .551 .590 .630 .590 .630 .590
3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 3/4 1
06 08 08 08 10 10 12 12 12 16
3/4-16 3/4-16 7/8-14 1-1/16-12 7/8-14 1-1/16-12 1-1/16-12 1-3/16-12 1-5/16-12 1-5/16-12
15/16 7/8 1 1-1/4 1-1/16-12 1-1/4 1-1/4 1-13/32 1-1/2 1-1/2
.669 .709 .748 .748 .748 .748 .787 .827 .827 .866
FEMALE JIC SWIVEL 90 ELBOW PART NO.
HOSE I.D. IN.
DAS H SIZ E
THREAD
HEX IN. "H"
DROP IN. "X"
CUTOFF IN. "C"
2203-60490M 2204-60490M 2204-60590M 2204-60690M 2205-60690M 2206-60690M 2206-60790M SAE 2206-60890M 2208-60890M 2208-61090M 2208-61290M 2210-61090M 2210-61290M 2212-61290M 2212-61490M 2212-61690M 2216-61690M
3/16 1/4 1/4 1/4 5/16 3/8 3/8
03 04 04 04 05 06 06
7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 9/16-18 5/8-18
19/32 19/32 11/16 3/4 3/4 3/4 7/8
.846 .984 .984 1.063 1.26 1.22 1.26
.866 .984 .984 .984 .984 1.299 1.299
3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 3/4 1
06 08 08 08 10 10 12 12 12 16
3/4-16 3/4-16 7/8-14 1-1/16-12 7/8-14 1-1/16-12 1-1/16-12 1-3/16-12 1-5/16-12 1-5/16-12
15/16 15/16 1-1/16 1-1/4 1-1/16 1-1/4 1-1/4 1-13/32 1-1/2 1-1/2
1.338 1.535 1.575 1.654 1.771 1.771 2.125 2.086 2.204 2.599
1.299 1.535 1.535 1.535 1.771 1.771 2.204 2.204 2.204 2.756
*1 piece fitting includes ferrule Page 21
DYNA FLEX
Thermoplastic Hose and Fittings
FEMALE JIC SWIVEL 45 DEGREE ELBOW PART NO.
HOSE I.D. IN.
DASH SIZE
THREAD
HEX IN. "H"
DROP IN "X"
2203-60445M 2204-60445M 2204-60545M 2204-60645M 2205-60645M 2206-60645M 2206-60745M SAE 2206-60845M 2208-60845M 2208-61045M 2208-61245M 2210-61045M 2210-61245M 2212-61245M 2212-61445M 2212-61645M 2216-61645M
3/16 1/4 1/4 1/4 5/16 3/8 3/8
03 04 04 04 05 06 06
7/16-20 7/16-20 1/2-20 9/16-18 9/16-18 9/16-18 5/8-18
9/16 9/16 11/16 3/4 3/4 3/4 29/32
.551 .551 .551 .590 .787 .670 .670
1-1/4 1-9/16 1-9/16 1-5/8 1-15/16 1-31/32 2
3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 3/4 1
06 08 08 08 10 10 12 12 12 16
3/4-16 3/4-16 7/8-14 1-1/16-12 7/8-14 1-1/16-12 1-1/16-12 1-3/16-12 1-5/16-12 1-5//16-12
15/16 15/16 1-1/16 1-1/4 1-1/16 1-1/4 1-1/4 1-7/16 1-1/2 1-1/2
.750 .867 .906 .945 .906 .945 1.102 1.102 1.182 1.339
2-1/16 2-1/2 2-9/16 2-5/8 2-11/16 2-21/32 3-5/16 3-5/16 3-3/8 4-1/8
CUTOFF IN. "C"
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 22
DYNA FLEX
Thermoplastic Hose and Fittings
BSP MALE FITTING DYNA FLEX PART NO.
HOSE I.D. IN.
DASH SIZE
THREAD
HEX MM "H"
CUTOFF IN. "C"
3020302 3020304 3020402 3020404 3020406 3020504 3020506 3020604 3020606 3020608 3020806 3020808 3020810 3020812 3021008 3021010 3021012 3021212 3021212 3021616
3/16 3/16 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 1
03 03 04 04 04 05 05 06 06 08 08 08 08 08 10 10 10 12 12 16
1/8-28 1/4-19 1/8-28 1/4-19 3/8-19 1/4-19 3/8-19 1/4-19 3/8-19 1/2-14 3/8-19 1/2-14 5/8-14 3/4-14 5/8-14 5/8-14 3/4-14 3/4-14 1-11 1-11
12 15 12 15 19 15 19 15 19 22 19 22 19 22 27 22 27 27 36 36
.827 1.023 .827 1.063 1.102 1.063 1.102 1.063 1.142 1.260 1.142 1.299 1.338 1.378 1.299 1.378 1.378 1.417 1.535 1.574
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 23
DYNA FLEX
Thermoplastic Hose and Fittings
BSPT MALE FITTING DYNA FLEX PART NO.
HOSE I.D. IN.
DASH SIZE
THREAD
HEX MM "H"
CUTOFF IN. "C"
3020302T 3020304T 3020402T 3020404T 3020406T 3020504T 3020506T 3020604T 3020606T 3020608T 3020806T 3020808T 3021008T 3020812T 3021008T 3021010T 3021012T 3021212T 3021216T 3021616T
3/16 3/16 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 5/8 1/2 5/8 5/8 5/8 3/4 3/4 1
03 03 04 04 04 05 05 06 06 08 08 08 10 08 10 10 10 12 12 16
1/8-28 1/4-19 1/8-28 1/4-19 3/8-19 1/4-19 3/8-19 1/4-19 3/8-19 1/2-14 3/8-19 1/2-14 1/2-14 3/4-14 5/8-14 5/8-14 3/4-14 3/4-14 1-11 1-11
12 15 12 15 19 15 19 15 19 22 19 22 22 27 22 24 27 27 36 36
.827 1.063 .866 1.103 1.103 1.103 1.103 1.103 1.103 1.299 1.142 1.338 1.338 1.417 1.338 1.378 1.417 1.456 1.456 1.732
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 24
DYNA FLEX
Thermoplastic Hose and Fittings
BSP FEMALE SWIVEL 60 DEG. CONE PART NO.
HOSE I.D. IN.
DASH SIZE
HOLE THREAD "T"
HEX MM "E"
CUTOF F IN. "C"
3010302 3010304 3010402 3010404 3010406 3010504 3010506 3010604 3010606 3010608 3010806 3010808 3010810 3010812 3011010 3011212 3011212 3011216 3011616
3/16 3/16 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 3/4 3/4 1
03 03 04 04 04 05 05 06 06 08 08 08 08 08 10 10 12 12 16
1/8-28 1/4-19 1/8-28 1/4-19 3/8-19 1/4-19 3/8-19 1/4-19 3/8-19 1/2-14 3/8-19 1/2-14 5/8-14 3/4-14 5/8-14 3/4-14 3/4-14 1-11 1-11
14 19 14 19 22 19 22 19 22 27 22 27 30 32 30 32 45 58 58
.590 .669 .630 .669 .748 .709 .748 .709 .748 .866 .787 .905 .866 .866 .866 .866 .905 .984 1.023
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 25
DYNA FLEX
Thermoplastic Hose and Fittings
BSP SWIVEL FEMALE PARALLEL PIPE 45 DEGREE 60 DEGREE CONE DYNA FLEX PART NO.
HOSE I.D. IN.
DASH SIZE
THREAD
HEX MM. "H"
CUTOFF IN. "C"
DROP IN. "X"
3040302 3040304 3040404 3040406 3040506 3040606 3040608 3040808 3040810 3040812 3041010 3041012 3041212 3041216 3041616
3/16 3/16 1/4 1/4 5/16 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 1
03 03 04 04 05 06 06 08 08 08 10 10 12 12 16
1/8-28 1/4-19 1/4-19 3/8-19 3/8—19 3/8-19 1/2-14 1/2-14 5/8-14 3/4-14 5/8-14 3/4-14 3/4-14 1-11 1-11
14 19 19 22 22 22 27 27 30 32 30 32 32 38 38
1.338 1.338 1.614 1.730 1.968 2.047 2.165 2.637 2.677 2.677 2.677 2.835 3.307 3.425 4.173
1-3/8 1-3/8 1-5/8 1-3/4 2 2-1/32 2-3/16 2-5/8 2-21/32 2-21/32 2-23/32 2-13/16 3-5/16 3-7/16 4-3/16
BSP SWIVEL FEMALE PARALLEL PIPE 90 DEGREE 60 DEGREE CONE PART NO.
HOSE I.D. IN.
DASH SIZE
THREAD
HEX MM. "H"
CUTOFF IN. "C"
DROP IN. "X"
3030302 3030304 3030404 3030406 3030506 3030606 3030608 3030808 3030810 3030812 3031010 3031012 3031212 3031216 3031616
3/16 3/16 1/4 1/4 5/16 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 1
03 03 04 04 05 06 06 08 08 08 10 10 12 12 16
1/8-28 1/4-19 1/4-19 3/8-19 3/8-19 3/8-19 1/2-14 1/2-14 5/8-14 3/4-14 5/8-14 3/4-14 3/4-14 1-11 1-11
14 19 19 22 22 22 27 27 30 32 30 32 32 38 38
1.338 1.338 1.614 1.730 1.968 2.047 2.165 2.637 2.677 2.677 2.677 2.835 3.307 3.425 4.173
7/8 1 1 1-1/6 1-9/32 1-1/4 1-13/32 1-5/8 1-5/8 1-3/4 1-7/8 1-31/32 2-1/8 2-5/32 2-5/8
Page 26
DYNA FLEX
Thermoplastic Hose and Fittings
METRIC FEMALE SWIVEL LIGHT SERIES DKL/DKOL (DIN 3865) DYNA FLEX PART NO.
HOSE I.D.
DAS H SIZE
THREAD "T"
HE X MM . "E"
CUTOFF IN. "C"
376120306 376120408 376140408 376160410 376160612 376180412 376160510 376180612 376220615 376220815 376261018 376261222 376301222 376361628
3/16 1/4 1/4 1/4 3/8 1/4 5/16 3/8 3/8 1/2 5/8 3/4 3/4 1
03 04 04 04 06 04 05 06 06 08 10 12 12 16
M12-1.5 M12-1.5 M14-1.5 M16-1.5 M16-1.5 M18-1.5 M16-1.5 M18-1.5 M22-1.5 M22-1.5 M26-1.5 M26-1.5 M30-2 M36-2
14 14 17 19 19 22 19 22 27 27 32 32 36 41
.905 .984 .905 .905 .984 .945 .905 .945 1.063 1.063 1.142 1.220 1.142 1.181
Page 27
METRIC FEMALE 45 ELBOW SWIVEL LIGHT SERIES DKL/DKOL (DIN 3865) DYNA FLEX PART NO.
HOSE I.D.
DASH SIZE
THREAD T
HEX MM "E"
CUTOFF IN. "C"
DROP "H"
378120306 378140408 378160410 378180412 378160510 378180612 378220615 378220815 378261018 378301222 378361628
3/16 1/4 1/4 1/4 5/16 3/8 3/8 1/2 5/8 3/4 1
03 04 04 04 05 06 06 08 10 12 16
M12-1.5 M14-1.5 M16-1.5 M18-1.5 M16-1.5 M18-1.5 M22-1.5 M22-1.5 M26-1.5 M30-2 M36-2
14 17 19 22 19 22 27 27 32 36 41
.590 1.023 1.023 1.142 1.142 1.260 1.378 1.693 1.654 1.929 2.283
.590 1.023 1.063 1.181 1.220 1.299 1.260 1.417 1.810 2.008 2.402
METRIC FEMALE 90 ELBOW SWIVEL LIGHT SERIES DKL/DKOL (DIN 3865) PART NO.
HOSE I.D.
DAS H SIZ E
THREAD T
HE X MM . "E"
CUTO FF IN. "C"
DROP IN. "H"
377120306 377140408 377160410 377180412 377160510 377180612 377220615 377220815 377261018 377301222 377361628
3/16 1/4 1/4 1/4 5/16 3/8 3/8 1/2 5/8 3/4 1
03 04 04 04 05 06 06 08 10 12 16
M12-1.5 M14-1.5 M16-1.5 M18-1.5 M16-1.5 M18-1.5 M22-1.5 M22-1.5 M26-1.5 M30-2 M36-2
14 17 19 22 19 22 27 27 32 36 41
.590 1.023 1.023 1.142 1.142 1.260 1.378 1.693 1.654 1.929 2.283
.590 1.023 1.063 1.181 1.220 1.299 1.260 1.417 1.810 2.008 2.402
Page 28
DYNA FLEX
Thermoplastic Hose and Fittings
METRIC STUD MALE HEAVY SERIES DYNA FLEX PART NO.
HOSE I.D. IN.
DASH SIZE
THREAD
HEX MM "H"
CUTOFF IN. "C"
323160308 323160408 323180410 323200512 323200612 323200614 323240816 323301020 323301220 323361225 323361625 323421630
3/16 1/4 1/4 5/16 3/8 3/8 1/2 5/8 3/4 3/4 1 1
03 04 04 05 06 06 08 10 12 12 16 16
M16-1.5 M16-1.5 M18-1.5 M20-1.5 M20-1.5 M22-1.5 M24-1.5 M30-2 M30-2 M36-2 M36-2 M42-2
17 17 19 22 22 22 24 30 30 36 36 42
1.181 1.063 1.063 1.142 1.142 1.22 1.26 1.338 1.378 1.496 1.535 1.654
METRIC FEMALE SWIVEL HEAVY SERIES DKL/DKOL (DIN 3865) PART NO.
373160308 373160408 373180410 373200512 373200612 373220614 373240816 373301020 373301220 373361225 373361625 373421630
HOSE I.D.
DASH SIZE
THREAD
HEX IN. "H"
CUTOFF IN. "C"
3/16 1/4 1/4 5/16 3/8 3/8 1/2 5/8 3/4 3/4 1 1
03 04 04 05 06 06 08 10 12 12 16 16
M16-1.5 M16-1.5 M18-1.5 M20-1.5 M20-1.5 M22-1.5 M24-1.5 M30-2 M30-2 M36-2 M36-2 M42-2
19 19 22 24 24 27 30 36 36 46 46 50
.984 .984 .945 1.023 1.023 1.063 1.181 1.417 1.417 1.810 1.810 1.968
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com Page 29
DYNA FLEX
Thermoplastic Hose and Fittings
METRIC FEMALE 45 ELBOW SWIVEL HEAVY SERIES DKL/DKOL (DIN 3865) DYNA FLEX PART NO.
HOSE I.D.
DASH SIZE
THREAD T
HE X MM . "E"
CUTOFF IN. "C"
DROP IN. "H"
375160308 375160408 375180410 375200512 375200612 375220614 375240816 375301020 375301220 375361225 375361625 375421630
3/16 1/4 1/4 5/16 3/8 3/8 1/2 5/8 3/4 3/4 1 1
03 04 04 05 06 06 08 10 12 12 16 16
M16-1.5 M16-1.5 M18-1.5 M20-1.5 M20-1.5 M22-1.5 M24-1.5 M30-2 M30-2 M36-2 M36-2 M42-2
19 19 22 24 24 27 30 36 36 46 46 50
1.378 1.654 1.771 1.968 2.086 2.086 2.599 2.835 3.425 2.244 2.835 2.756
.630 .590 .709 .787 .709 .748 .709 1.023 1.181 1.220 1.299 1.378
METRIC FEMALE 90 ELBOW SWIVEL HEAVY SERIES DKL/DKOL (DIN 3865) PART NO.
HOSE I.D.
DASH SIZE
THREAD "T"
IN. "E"
CUTOF F IN. "C"
DROP IN. "H"
374160308 374160408 374180410 374200512 374200612 374220614 374240816 374301020 374301220 374361225 374361625 374421630
3/16 1/4 1/4 5/16 3/8 3/8 1/2 5/8 3/4 3/4 1 1
03 04 04 05 06 06 08 10 12 12 16 16
M16-1.5 M16-1.5 M18-1.5 M20-1.5 M20-1.5 M22-1.5 M24-1.5 M30-2 M30-2 M36-2 M36-2 M42-2
19 19 22 24 24 27 30 36 36 46 46 50
.945 1.023 1.063 1.142 1.338 1.299 1.654 1.810 2.283 2.244 2.835 2.756
.945 1.023 1.181 1.456 1.299 1.299 1.456 1.968 2.165 2.283 2.599 2.835
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 E-Mail: sales@flexinc.com Web Site: www.dynaflexinc.com Page 30
DYNA FLEX
Thermoplastic Hose and Fittings
JIS KOMATSU FEMALE FITTING PART NO.
HOSE IN. I.D.
DASH SIZE
THREAD
HEX MM. "H"
CUTOFF IN. "C"
0414MJFS 0514MJFS 0614MJFS 0618MJFS 0822MJFS 1024MJFS 1230MJFS 1633MJFS
1/4 5/16 3/8 3/8 1/2 5/8 3/4 1
04 05 06 06 08 10 12 16
M14-1.5 M16-1.5 M14-1.5 M18-1.5 M22-1.5 M24-1.5 M30-1.5 M33-1.5
19 22 19 24 27 32 36 41
.787 .827 .827 .827 .945 .984 1.181 1.299
JIS KOMATSU BSP FEMALE FITTING PART NO.
HOSE IN. I.D.
DASH SIZE
THREAD
HEX MM. "H"
CUTOFF IN. "C"
04MJFSBSP 06MJFSBSP 08MJFSBSP 12MJFSBSP 16MJFSBSP
1/4 3/8 1/2 3/4 1
04 06 08 12 16
1/4-19 3/8-19 1/2-14 3/4-14 1-11
19 19 27 36 41
.787 .827 .945 1.181 1.299
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com Page 31
DYNA FLEX
Thermoplastic Hose and Fittings
ORFS FEMALE SAEJ1456 DYNA FLEX PART NO.
HOSE I.D.
DASH SIZE
THREAD
HEX IN. "H"
CUTOFF IN. "C"
ORFS-S-04-04 ORFS-S-04-06 ORFS-S-05-06 ORFS-S-06-06 ORFS-S-06-08 ORFS-S-08-08 ORFS-S-08-10 ORFS-S-08-12 ORFS-S-10-10 ORFS-S-12-10 ORFS-S-12-12 ORFS-S-12-16 ORFS-S-16-16
1/4 1/4 5/16 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 3/4 1
04 04 05 06 06 08 08 08 10 12 12 12 16
9/16-18 11/16-16 11/16-16 11/16-16 13/16-16 13/16-16 1-14 1-3/16-12 1-14 1-14 1-3/16-12 1-7/16-12 1-7/16-12
3/4 7/8 7/8 7/8 7/8 31/32 1-3/16 1-13/32 1-3/16 1-3/16 1-13/32 1-5/8 1-5/8
.787 .787 .827 .827 .827 .945 1.299 1.299 1.299 1.299 1.338 1.417 1.456
MALE O-RING BOSS PART NO.
HOSE I.D.
DASH SIZE
THREAD
HEX IN. "E"
CUTOFF IN. "C"
2204-704 2204-705 2204-706 2205-706 2206-706 2206-708 2208-708 2208-710 2208-712 2210-710 2210-712 2212-712 2212-716 2216-716
1/4 1/4 1/4 5/16 3/8 3/8 1/2 1/2 1/2 5/8 5/8 3/4 3/4 1
04 04 04 05 06 06 08 08 08 10 10 12 12 16
7/16-20 1/2-20 9/16-18 9/16-18 9/16-18 3/4-16 3/4-16 7/8-14 1-1/16-12 7/8-14 1-1/16-12 1-1/16-12 1-5/16-12 1-5/16-12
9/16 21/32 21/32 21/32 21/32 15/16 15/16 1-1/16 1-17/64 1-1/16 1-17/64 1-17/64 1-1/2 1-1/2
15/16 15/16 15/16 15/16 1 1-1/8 1-1/8 1-3/16 1-17/16 1-3/16 1-17/16 1-5/16 1-7/16 1-15/32
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 32
DYNA FLEX
Thermoplastic Hose and Fittings
ORFS FEMALE 45 SAEJ1453 PART NO.
HOSE I.D. .
DASH SIZE
THREAD
HEX IN. "H"
CUTOFF IN. "C"
DROP IN. "X"
ORFS-45-04-04 ORFS-45-04-06 ORFS-45-05-06 ORFS-45-06-06 ORFS-45-06-08 ORFS-45-08-08 ORFS-45-08-10 ORFS-45-08-12 ORFS-45-10-10 ORFS-45-12-10 ORFS-45-12-12 ORFS-45-12-16 ORFS-45-16-16
1/4 1/4 5/16 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 3/4 1
04 04 05 06 06 08 08 08 10 12 12 12 16
9/16-18 11/16-16 11/16-16 11/16-16 13/16-16 13/16-16 1-14 1-3/16-12 1-14 1-14 1-3/16-12 1-7/16-12 1-7/16-12
3/4 7/8 7/8 7/8 7/8 31/32 1-3/16 1-13/32 1-3/16 1-3/16 1-13/32 1-5/8 1-5/8
1.570 1.614 1.730 1.968 2.008 2.362 2.402 2.441 2.637 3.150 3.189 3.228 3.937
.512 .551 .551 .590 .630 .827 .866 .905 .748 .866 .905 .945 1.181
ORFS FEMALE 90 SAEJ1453 PART NO.
HOSE I.D. IN.
DASH SIZE
THREAD
HEX
CUTOFF IN. "C"
DROP IN. "X"
ORFS-90-04-04 ORFS-90-04-06 ORFS-90-05-06 ORFS-90-06-06 ORFS-90-06-08 ORFS-90-08-08 ORFS-90-08-10 ORFS-90-08-12 ORFS-90-10-10 ORFS-90-12-10 ORFS-90-12-12 ORFS-90-12-16 ORFS-90-16-16
1/4 1/4 5/16 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 3/4 1
04 04 05 06 06 08 08 08 10 12 12 12 16
9/16-18 11/16-16 11/16-16 11/16-16 13/16-16 13/16-16 1-14 1-3/16-12 1-14 1-14 1-3/16-12 1-7/16-12 1-7/16-12
3/4 7/8 7/8 7/8 7/8 31/32 1-3/16 1-13/32 1-3/16 1-3/16 1-13/32 1-5/8 1-5/8
1.063 1.063 1.142 1.338 1.338 1.654 1.654 1.654 1.810 2.283 2.283 2.283 2.835
.905 .984 1.063 1.142 1.220 1.378 1.456 1.535 1.535 1.730 1.810 1.889 2.322
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 33
DYNA FLEX
Thermoplastic Hose and Fittings
MALE O-RING BOSS SWIVEL 90
PART NO.
HOSE I.D. IN.
DASH SIZE
HEX "E"
DROP "H"
CUTOFF IN. "C"
220881090
1/2
08
11/16
121/32
1-1/8
221081090
5/8
10
11/16
121/32
15/32
221281290
5/8
10
117/64
129/32
13/16
NPSM SWIVEL FEMALE 1
PART NO.
HOSE I.D.
DASH SIZE
THREAD "T"
CUTOFF IN. "C"
HEX IN. "H"
2203964
3/16
03
1/4-18
.693
3/4
2204964
1/4
04
1/4-18
.701
3/4
2206966
3/8
06
3/8-18
.768
27/32
2208968
1/2
08
1/2-14
.886
1-1/16
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 34
DYNA FLEX
Thermoplastic Hose and Fittings
BLANK INSERT FITTING DYNA FLEX PART NO.
HOSE I.D. IN.
2204-0000 2206-0000 2208-0000 2212-0000 2216-0000 2220-0000 2224-0000 2232-0000
1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
DA SH SIZ E
04 06 08 12 16 20 24 32
HEX
CUTOFF
"E"
IN.
19 22 27 32 38 50 55 65
1-1/8 29/32 1-5/32 1-17/64 1-7/16 1-5/8 1-11/16 1-25-32
"C"
HOSE MENDER PART NO.
HOSE I.D. IN.
DASH SIZE
CUTOFF IN. "C"
2203-2203 2204-2204 2205-2205 2206-2206 2208-2208 2210-2210 2212-2212 2216-2216 2220-2220
3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4
03 04 05 06 08 10 12 16 20
11/16 11/16 11/16 11/16 23/32 23/32 3/4 13/16 15/16
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 35
DYNA FLEX
Thermoplastic Hose and Fittings BANJO BSP
PART NO.
HOSE
DASH
HOLE
HOLE
I.D. IN.
SIZE
THREAD
MM
RADI US
CUTOFF IN.
MM "C" "R"
2203-2BSPBANJO 2203-4BSPBANJO 2204-2BSPBANJO 2204-4BSPBANJO 2205-4BSPBANJO 2205-6BSPBANJO 2205-4BSPBANJO 2205-6BSPBANJO 2206-6BSPBANJO 2206-8BSPBANJO 2208-8BSPBANJO 2210-10BSPBANJO 2212-12BSPBANJO 2212-16BSPBANJO 2216-16BSPBANJO
3/16 3/16 1/4 1/4 5/16 5/16 5/16 5/16 3/8 3/8 1/2 5/8 3/4 3/4 1
03 03 04 04 05 05 05 05 06 06 08 10 12 16 16
1/8-28 1/4-19 1/8-28 1/4-19 1/4-19 3/8-19 1/4-19 3/8-19 3/8-19 1/2-14 5/8-14 5/8-14 3/4-14 1-11 1-11
10.1 13.3 10.1 13.3 16.8 13.3 16.8 13.3 21.1 16.8 21.1 23.1 26.6 33.5 33.5
17 24 17 24 28 24 28 24 28 36 36 40 45 58 58
3/4 1 1 1 1 1 1 1 1 1-1/4 1-1/4 1-1/2 1-1/2 1-15/16 1-31/32
BANJO METRIC PART NO.
HOSE
DASH
HOLE
HOLE
MM
CUTOFF
I.D. IN.
SIZE
THREAD
MM
"R"
IN.
M10-1.5 M10-1.5 M12-1.5 M14-1.5 M14-1.5 M16-1.5 M18-1.5 M14-1.5 M16-1.5 M18-1.5 M18-1.5 M22-1.5 M26-1.5 M30-1.5
3.1 4.1 4.1 4.1 5.1 5.1 5.2 6.1 6.1 6.2 8.2 8.2 N/A 6.2
17 17 20 24 24 28 32 24 28 32 32 36 45 54
"C" 2203-M10-1.5BANJO 2204-M10-1.5BANJO 2204-M12-1.5BANJO 2204-M14-1.5BANJO 2205-M14-1.5BANJO 2205-M16-1.5BANJO 2205-M18-1.5BANJO 2206-M14-1.5BANJO 2206-M16-1.5BANJO 2206-M18-1.5BANJO 2208-M18-1.5BANJO 2208-M22-1.5BANJO 2212-M26-1.5BANJO 2216-M30-1.5BANJO
3/16 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 1/2 1/2 3/4 1
03 04 04 04 05 05 05 06 06 08 08 08 12 16
.98 .98 .87 .98 .98 1.22 1.14 .98 1.22 1.14 1.14 1.26 1.65 1.69
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A. PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com Page 36
DYNA FLEX
Thermoplastic Hose and Fittings
Metric Standpipe PART NO.
2203-6mm 2203-8mm 2204-6mm 2204-8mm 2204-10mm 2204-12mm 2205-10mm 2205-12mm 2206-10mm 2206-12mm 2206-14mm 2206-15mm 2208-14mm 2208-15mm 2208-16mm 2208-18mm 2210-18mm 2210-20mm 2210-22mm 2212-18mm 2212-20mm 2212-22mm 2212-25mm 2216-25mm 2216-28mm 2216-30mm
HOSE I.D.
DASH SIZE
3/16 3/16 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 3/4 1 1 1
03 03 04 04 04 04 05 05 06 06 06 06 08 08 08 08 10 10 10 12 12 12 12 16 16 16
PIPE MM "T" 6 8 6 8 10 12 10 12 10 12 14 15 14 15 16 18 18 20 22 20 22 22 25 25 28 30
CUTOFF IN. "C"
1-3/16 1-1/8 1-1/4 1-3/16 1-9/32 1-3/16 1-7/32 1-3/16 1-3/16 1-1/4 1-17/32 1-1/4 1-17/32 1-5/16 1-17/32 1-3/8 1-3/8 1-3/4 1-9/32 1-15/32 1-13/16 1-1/2 1-15/16 2 1-5/8 2-1/8
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 37
DYNA FLEX
Thermoplastic Hose and Fittings
Metric Standpipe 90 PART #
HOSE DASH I.D. SIZE
PIPE CUTOFF MM IN. "T" "C"
DROP IN. "H"
2203-6mm90
3/16
03
6
7/8
1-1/4
2203-8mm90 2204-6mm90 2204-8mm90 2204-10mm90 2204-12mm90 2205-10mm90 2205-12mm90 2206-10mm90 2206-12mm90 2206-14mm90 2206-15mm90 2208-14mm90 2208-15mm90 2208-16mm90 2208-18mm90 2210-18mm90 2210-20mm90 2210-22mm90 2212-20mm90 2212-22mm90 2212-25mm90 2216-25mm90 2216-28mm90 2216-30mm90
3/16 1/4 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 1 1 1
03 04 04 04 04 05 05 06 06 06 06 08 08 08 08 10 10 10 12 12 12 16 16 16
8 6 8 10 12 10 12 10 12 14 15 14 15 16 18 18 20 22 22 22 25 25 28 30
7/8 1 1 1 1 1-1/8 1-1/8 1-9/32 1-9/32 1-9/32 1-9/32 1-17/32 1-17/32 1-17/32 1-5/8 1-5/8 1-7/8 2-1/16 1-15/16 2-1/8 2-1/4 2-9/32 2-9/16 2-51/8
1-1/4 1-3/8 1-13/32 1-7/16 1-7/16 1-9/16 1-5/8 1-9/16 1-9/16 1-3/4 1-5/8 1-31/32 1-13/16 2 2-1/4 2-1/4 2-9/16 2-25/32 2-9/16 2-25/32 3 3 3-5/16 3-1/2
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com Page 38
DYNA FLEX
Thermoplastic Hose and Fittings
METRIC STANDPIPE 45 PART NO.
HOSE I.D..
DASH SIZE
PIPE MM "T"
CUTOFF IN. "C"
DROP IN. "H"
2203-6mm45
3/16
03
6
1
1-1/2
2203-8mm45 2204-6mm45 2204-8mm45 2204-10mm45 2205-10mm45 2205-12mm45 2206-10mm45 2206-12mm45 2206-14mm45 2206-15mm45 2208-14mm45 2208-15mm45 2208-16mm45 2208-18mm45 2210-18mm45 2210-20mm45 2210-22mm45 2212-20mm45 2212-22mm45 2212-25mm45 2216-25mm45 2216-28mm45 2216-30mm45
3/16 1/4 1/4 1/4 5/16 5/16 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 1 1 1
03 04 04 04 05 05 06 06 06 06 08 08 08 08 10 10 10 12 12 12 16 16 16
8 6 8 10 10 12 10 12 14 15 14 15 16 18 18 20 22 20 22 25 25 28 30
1 1-3/16 1-1/8 1-3/16 1-3/16 1-1/8 1-11/32 1-11/32 1-17/32 1-11/32 1-11/16 1-17/32 1-21/32 1-1/4 1-1/4 1-11/32 1-3/8 1-3/8 1-3/8 1-17/32 1-17/32 1-1/2 1-11/16
1-1/2 1-7/8 1-25/32 1-7/8 1-7/8 1-9/16 2-9/32 2-9/32 2-1/2 2-9/32 2-29/32 2-25/32 2-31/32 2-7/16 2-7/16 2-7/16 2-11/16 2-11/16 2-11/16 2-31/32 2-15/16 2-7/8 3-5/16
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 E-Mail: sales@flexinc.com Web Site: www.dynaflexinc.com
Page 39
DYNA FLEX
Thermoplastic Hose and Fittings
BLANK INSERT FITTING DYNA FLEX PART NO.
HOSE I.D. IN.
2204-0000 2206-0000 2208-0000 2212-0000 2216-0000 2220-0000 2224-0000 2232-0000
1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
DA SH SIZ E
04 06 08 12 16 20 24 32
HEX
CUTOFF
"E"
IN.
19 22 27 32 38 50 55 65
1-1/8 29/32 1-5/32 1-17/64 1-7/16 1-5/8 1-11/16 1-25-32
"C"
HOSE MENDER PART NO.
HOSE I.D. IN.
DASH SIZE
CUTOFF IN. "C"
2203-2203 2204-2204 2205-2205 2206-2206 2208-2208 2210-2210 2212-2212 2216-2216 2220-2220
3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 1-1/4
03 04 05 06 08 10 12 16 20
11/16 11/16 11/16 11/16 23/32 23/32 3/4 13/16 15/16
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 40
DYNA FLEX
Thermoplastic Hose and Fittings
KARCHER MALE PART NO.
HOSE IN. I.D.
DASH SIZE
THREAD "T"
CUTOFF MM "C"
4-22X1.5GUN 5-22X1.5GUN
1/4 5/16
04 05
M22X1.5 M22X1.5
33 33
DYNA FLEX, INC. 7300 INDUSTRIAL PARK BLVD. MENTOR, OHIO 44060 U.S.A.
PHONE: (440) 946-0719 TOLL FREE: (800) 525-8463 FAX: (440) 946-4620 Web Site: www.dynaflexinc.com E-Mail: sales@flexinc.com
Page 41
DYNA FLEX
Thermoplastic Hose and Fittings
D105 QK HYDRAULIC HOSE CRIMPER
FEATURES - Adjustable Ram Retraction Stop to help customize the hose assembly crimping speed based on your fitting. Automatic shut off for precise crimps. - HP 110 Volt Valpower Hydraulic Pump powerful enough to crimp application in seconds. -Micro crimp adjuster enables user to adjust in metric and nonmetric increments. - Fully adjustable to accommodate a wide range of different hose fittings without the need for special shims or spacers. -Die sets are easy to install and replace. Complete range of dies and accessories are available.
Page 42
Micro-Crimp Adj
2006 Hose Catalog request form
Company Name: ____________________________________ Address: __________________________________________ City: _____________________________________________ State: _______________________ Zip: _________________ Phone: _______________________FAX _________________ E-mail: ___________________________________________ Name: ____________________________________________ Number of catalogs requested: _______________ Dyna Flex Inc. Updates: New Products, Specials, Pricing……… Please select how you would like to receive updates Fax E-mail Dyna Flex Inc. will mail catalog(s) upon Receipt of signed catalog request form.
Signature: ______________________________ Date: __________
Dyna Flex Inc. 7300 Industrial Park Blvd., Mentor, Oh 44060 Phone: 800-525-8463 Fax: 440-946-4620 E-mail: sales@flexinc.com
www.dynaflexinc.com
Page 43