STOREDGE TM
SolarEdge Single Phase StorEdgeTM Solutions for North America
12-25
SolarEdge StorEdge™ Solutions Benefits: More Energy - DC-coupled architecture stores PV power directly to the battery without AC conversion losses Simple Design & Installation - single inverter for both PV and storage backup and grid-tied applications Enhanced Safety - no high voltage or current during installation, maintenance or firefighting Full Visibility - monitor battery status, PV production, remaining backup power and self-consumption data
USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL
www.solaredge.us
SolarEdge Single Phase StorEdgeTM Solutions for North America StorEdge™ Features: All-in-one solution uses a single DC optimized inverter to manage and monitor both PV generation and energy storage Backup power - automatically provides power to backed-up loads in the event of grid interruption Smart Energy Management - export control, time-of-use shifting, maximized self-consumption, demand response and peak shaving capabilities Controls third-party batteries such as the Tesla home battery, the Powerwall
PV
Grid
Power Optimizers
Backed-up Loads
Loads
Meter
DC Battery Pack
Inverter AC
AC
Cloud-based Monitoring Platform
Autotransformer
DC
AC
SolarEdge StorEdgeTM Solutions for North America - Product Selector Grid-tied solar, backup power and smart energy management Single Phase StorEdge™ Inverter Auto-transformer SolarEdge Electricity Meter Battery
Grid-tied solar and backup power
Grid-tied solar and smart energy management
SolarEdge Single Phase StorEdge Inverter for North America SE7600A-USS
Single inverter for PV, grid-tied storage and backup power Includes the hardware required to provide automatic backup power to backed-up loads in case of grid interruption Includes all interfaces needed for battery connection SE7600A-USS OUTPUT - AC (LOADS/GRID) Rated AC Power Output Max AC Power Output AC Output Voltage Min-Nom-Max (L-L)(1) AC Frequency Min-Nom-Max (1) Maximum Continuous Output Current @240V GFDI Utility Monitoring, Islanding Protection, Country Configurable Thresholds Charge Battery from AC (if Allowed) THD Power factor with rated power Typical Nighttime Power Consumption
7600 8350 211-240-264 59.3 - 60 - 60.5 32 1 Yes Yes <3 >0.99 (configurable; 0.9 leading to 0.9 lagging) <5
VA VA Vac Hz A A
5000 7600 for 10sec 211-240-264 105-120-132 55 - 60 - 65 21 25 1 Yes
VA VA Vac Vac Hz A A A
<5 0.2 leading to 0.2 lagging <2 <5
%
% W
OUTPUT - AC (BACKUP POWER)(2) Rated AC Power Output Max AC Power Output - Surge AC Output Voltage Min-Nom-Max (L-L) AC Output Voltage Min-Nom-Max (L-N) AC Frequency Min-Nom-Max Maximum Continuous Output Current @240V - Backup Mode Max Continuous Output Current per Phase @120V GFDI AC Circuit Breaker THD Power factor with rated power Automatic switchover time Typical Nighttime Power Consumption
sec W
INPUT - DC (PV and BATTERY) Transformer-less, Ungrounded Max Input Voltage Nom DC Input Voltage Reverse-Polarity Protection Ground-Fault Isolation Detection Maximum Inverter Effciency CEC Weighted Effciency
Yes 500 400 Yes 600k立 Sensitivity 98 97.5
Vdc Vdc
% %
INPUT - DC (PV) Maximum DC Power (STC) Max Input Current (3) 2-pole Disconnection
10250 23 Yes
W Adc
3300 1 8.5 Yes 12A (field replaceable)
W
INPUT - DC (BATTERY) Continuous Peak Power Number of Batteries per Inverter(4) Max Input Current 2-pole Disconnection DC Fuses on Plus and Minus
ADDITIONAL FEATURES Supported Communication Interfaces Battery Power Supply Revenue Grade Data, ANSI C12.1 Integrated AC, DC and Communication Connection Unit AC Disconnect Manual Inverter Bypass Switch DC Voltage Rapid Shutdown (PV and Battery) Auto-transformer thermal protection
RS485 for battery, RS485, Ethernet, ZigBee (optional) Yes, 12V / 53W Optional (5) Yes Yes Yes Yes, according to NEC 2014 690.12 Yes
Adc
SolarEdge Single Phase StorEdge Inverter for North America SE7600A-USS SE7600A-USS STANDARD COMPLIANCE (PENDING) Safety
UL1741, UL1699B, UL1998, CSA 22.2
Grid Connection Standards
IEEE1547, Rule 21, Rule 14
Emissions
FCC part15 class B
INSTALLATION SPECIFICATIONS AC Output (Loads/Grid) conduit size / AWG range
1” / 14-6 AWG
AC Output (Backup) conduit size / AWG range
0.75-1” knockouts / 14-6 AWG
AC Input (Auto-transformer) conduit size / AWG range
0.75-1” / 14-6 AWG
DC Input (PV) conduit size / AWG range
0.75” / 14-8 AWG
DC Input (Battery) conduit size / AWG range
0.75” / 16-10 AWG
Dimensions with Connection Unit (HxWxD)
37 x 12.5 x 7.2 / 940 x 315 x 184
in / mm
58.5 / 26.5
lb / kg
Weight with Connection Unit Cooling
Natural convection and internal fan (user replaceable)
Noise Min - Max Operating Temperature Protection Rating (1) (2) (3) (4) (5)
<50
dBA
-13 to +140 / -25 to +60
˚F / ˚C
NEMA 3R
For other regional settings please contact SolarEdge Support. Not designed for standalone applications and requires AC for commissioning. A higher current source may be used; the inverter will limit its input current to the values stated. For more batteries per inverter contact SolarEdge. Revenue grade inverter P/N: SE7600A-USS02NNG2.
Inverter Interface
SolarEdge Auto-transformer SEAUTO-TX-5000 SEAUTO-TX-5000 ELECTRICAL RATINGS Rated Power - Continuous Rated Power - Peak Output Voltage Max Continuous Output Current per Phase @120V Split Phase Imbalance (@Rated Power) Thermal Protection
5000
VA
7600 for 10sec
VA
120/240V Split Phase 25
A
Yes, up to 25A difference between phases Yes
INSTALLATION SPECIFICATIONS AC Output conduit size / AWG range Dimensions (HxWxD) Weight Min - Max Operating Temperature Protection Rating Installation
0.75” / 14-6 AWG 6.7 x 7.9 x 5.5 / 170 x 200 x 140
in / mm
29.7 / 13.5
lb / kg
-13 to +140 / -25 to +60
˚F / ˚C
NEMA 3R Wall mounted
SolarEdge Electricity Meter for North America SE-MTR240-2-200-S1 / SE-MTR240-2-400-S1 For meter specifications refer to: http://www.solaredge.us/files/pdfs/products/se_electricity_meter_na.pdf
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 01/2016. V.01. Subject to change without notice.
For North America SE3000A-US / SE3800A-US / SE5000A-US / SE6000A-US / SE7600A-US / SE10000A-US / SE11400A-US
INVERTERS
SolarEdge Single Phase Inverters
12-25
The best choice for SolarEdge enabled systems
Integrated arc fault protection for NEC 2011 690.11 compliance Rapid shutdown for NEC 2014 690.12 Superior efficiency (98%) Small, lightweight and easy to install on provided bracket Built-in module-level monitoring Internet connection through Ethernet or Wireless Outdoor and indoor installation Fixed voltage inverter, DC/AC conversion only Pre-assembled Safety Switch for faster installation Optional – revenue grade data, ANSI C12.1
USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL
www.solaredge.us
Single Phase Inverters for North America SE3000A-US / SE3800A-US / SE5000A-US / SE6000A-US / SE7600A-US / SE10000A-US / SE11400A-US
Nominal AC Power Output Max. AC Power Output AC Output Voltage Min.-Nom.-Max.(1) 183 - 208 - 229 Vac AC Output Voltage Min.-Nom.-Max.(1) 211 - 240 - 264 Vac AC Frequency Min.-Nom.-Max.(1) Max. Continuous Output Current
SE3800A-US
SE5000A-US
SE6000A-US
SE7600A-US
3000
3800
5000
6000
7600
3300
4150
5400 @ 208V 5450 @240V
6000
8350
-
-
3
-
-
3
-
3
3
3
3
3
3
3
12.5
16
24 @ 208V 21 @ 240V
32
48 @ 208V 42 @ 240V
47.5
13500
15350
33 @ 208V 30.5 @ 240V
W Vdc Vdc
34.5
Adc
98
Adc %
97.5
%
59.3 - 60 - 60.5 25
SE10000A- US 9980 @ 208V 10000 @240V 10800 @ 208V 10950 @240V
SE11400A-US
SE3000A-US
OUTPUT
11400
VA
12000
VA
Hz
GFDI Threshold 1 Utility Monitoring, Islanding Protection, Country Configurable Thresholds Yes
A A Yes
INPUT Maximum DC Power (STC) Transformer-less, Ungrounded Max. Input Voltage Nom. DC Input Voltage Max. Input Current(2)
4050
5100
9.5
13
Max. Input Short Circuit Current Reverse-Polarity Protection Ground-Fault Isolation Detection Maximum Inverter Efficiency
97.7
98.2
CEC Weighted Efficiency
97.5
98
Nighttime Power Consumption
6750
8100 10250 Yes 500 325 @ 208V / 350 @ 240V 16.5 @ 208V 18 23 15.5 @ 240V 45 Yes 600k Sensitivity 98.3 98.3 98 97 @ 208V 97.5 97.5 98 @ 240V < 2.5
98 97 @ 208V 97.5 @ 240V
<4
W
ADDITIONAL FEATURES Supported Communication Interfaces Revenue Grade Data, ANSI C12.1 Rapid Shutdown – NEC 2014 690.12
RS485, RS232, Ethernet, ZigBee (optional) Optional(3) Yes
STANDARD COMPLIANCE Safety Grid Connection Standards Emissions
UL1741, UL1699B, UL1998 , CSA 22.2 IEEE1547 FCC part15 class B
INSTALLATION SPECIFICATIONS AC output conduit size / AWG range DC input conduit size / # of strings / AWG range Dimensions with Safety Switch (HxWxD) Weight with Safety Switch Cooling
3/4” minimum / 16-6 AWG 3/4” minimum / 1-2 strings / 16-6 AWG 30.5 x 12.5 x 7.2 / 775 x 315 x 184 51.2 / 23.2
54.7 / 24.7 Natural Convection
Noise Min.-Max. Operating Temperature Range Protection Rating
< 25
Natural convection and internal fan (user replaceable)
3/4” minimum / 8-3 AWG 3/4” minimum / 1-3 strings / 14-6 AWG 30.5 x 12.5 x 10.5 / 775 x 315 x 260 88 .4 / 40.1
in / mm lb / kg
Fans (user replaceable)
< 50
-13 to +140 / -25 to +60 (-40 to +60 version available ) (4)
NEMA 3R
(1) For other regional settings please contact SolarEdge support. (2) A higher current source may be used; the inverter will limit its input current to the values stated. (3) Revenue grade inverter P/N: SExxxxA-US000NNR2 (for 7600W inverter:SE7600A-US002NNR2). (4)
-40 version P/N: SExxxxA-US000NNU4 (for 7600W inverter:SE7600A-US002NNU4).
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 01/2016. V.02. Subject to change without notice.
dBA ˚F / ˚C
SE9KUS / SE14.4KUS)
INVERTERS
SolarEdge Three Phase Inverters for the 208V Grid for North America
12-25
The best choice for SolarEdge enabled systems
Integrated arc fault protection for NEC 2011 690.11 Rapid shutdown for NEC 2014 690.12 Outdoor and indoor installation Built-in module-level monitoring Internet connection through Ethernet or Wireless Small, lightweight and easy to install on provided bracket Fixed voltage inverter, DC/AC conversion only Integrated Safety Switch
USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL
www.solaredge.us
Three Phase Inverters for the 208V Grid for North America SE9KUS / SE14.4KUS(1) SE9KUS OUTPUT Rated AC Power Output Maximum AC Power Output AC Output Line Connections AC Output Voltage Minimum-NominalMaximum(2) (L-N) AC Output Voltage Minimum-NominalMaximum(2) (L-L) AC Frequency Min-Nom-Max(2) Max. Continuous Output Current (per Phase) GFDI Threshold Utility Monitoring, Islanding Protection, Country Configurable Set Points INPUT Maximum DC Power (Module STC) Transformer-less, Ungrounded Maximum Input Voltage DC to Gnd Maximum Input Voltage DC+ to DCNominal Input Voltage DC to Gnd Nominal Input Voltage DC+ to DCMaximum Input Current Max. Input Short Circuit Current Reverse-Polarity Protection Ground-Fault Isolation Detection CEC Weighted Effciency Night-time Power Consumption ADDITIONAL FEATURES Supported Communication Interfaces Rapid Shutdown – NEC 2014 690.12 STANDARD COMPLIANCE Safety Grid Connection Standards Emissions INSTALLATION SPECIFICATIONS AC output conduit size / AWG range DC input conduit size / AWG range Number of DC inputs Dimensions (HxWxD) Dimensions with Safety Switch (HxWxD) Weight Weight with Safety Switch Cooling Noise Operating Temperature Range Protection Rating
SE14.4KUS
9000 14400 9000 14400 4-wire WYE (L1-L2-L3-N) plus PE or 3 wire Delta
VA VA
105-120-132.5
Vac
183-208-229
Vac
59.3 - 60 - 60.5 1
Hz A A
Yes
25
40
12150
19400 Yes
250 500
300 600 200 400
26.5
38 45 Yes 1MΩ Sensitivity
96.5 <3
97 <4
W Vdc Vdc Vdc Vdc Adc Adc % W
RS485, Ethernet, ZigBee (optional) With installation of rapid shutdown kit(3) UL1741, UL1699B, UL1998, CSA 22.2 IEEE1547 FCC part15 class B 3/4” minimum / 12-6 AWG 3/4” minimum / 12-6 AWG 2 pairs 3 pairs (with fuses on plus & minus)(4) 21 x 12.5 x 10.5 / 540 x 315 x 260 30.5 x 12.5 x 10.5 / 775 x 315 x 260 73.2 / 33.2 99.5 / 45 79.7 / 36.2 106 / 48 Fans (user replaceable) < 50 < 55 -40 to +140 / -40 to +60 NEMA 3R
(1)
For 277/480V inverters refer to: http://www.solaredge.com/files/pdfs/products/inverters/se-three-phase-us-inverter-datasheet.pdf For other regional settings please contact SolarEdge support. Rapid shutdown kit P/N: contact SolarEdge. (4) Field replacement kit for 1 pair of inputs P/N: DCD-3PH-1TBK. (2) (3)
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 06/2015. V.01. Subject to change without notice.
in/mm in/mm
dBA ˚F/˚C
SE10KUS / SE20KUS / SE33.3KUS )
INVERTERS
SolarEdge Three Phase Inverters for the 277/480V Grid for North America
12-25
The best choice for SolarEdge enabled systems
Integrated arc fault protection for NEC 2011 690.11 Rapid shutdown for NEC 2014 690.12 Superior efficiency (98.5%) Outdoor and indoor installation Built-in module-level monitoring Internet connection through Ethernet or Wireless Small, lightweight and easy to install on provided bracket Fixed voltage inverter, DC/AC conversion only Integrated Safety Switch and DC fuses (plus & minus)
USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL
www.solaredge.us
Three Phase Inverters for the 277/480V Grid for North America SE10KUS / SE20KUS / SE33.3KUS(1)
OUTPUT Rated AC Power Output Maximum AC Power Output AC Output Line Connections AC Output Voltage Minimum-Nominal-Maximum(2) (L-N) AC Output Voltage Minimum-Nominal-Maximum(2) (L-L) AC Frequency Min-Nom-Max(2) Max. Continuous Output Current (per Phase) GFDI Threshold Utility Monitoring, Islanding Protection, Country Configurable Set Points INPUT Maximum DC Power (Module STC) Transformer-less, Ungrounded Maximum Input Voltage DC to Gnd Maximum Input Voltage DC+ to DCNominal Input Voltage DC to Gnd Nominal Input Voltage DC+ to DCMaximum Input Current Max. Input Short Circuit Current Reverse-Polarity Protection Ground-Fault Isolation Detection CEC Weighted Effciency Night-time Power Consumption ADDITIONAL FEATURES Supported Communication Interfaces Rapid Shutdown – NEC 2014 690.12 STANDARD COMPLIANCE Safety Grid Connection Standards Emissions INSTALLATION SPECIFICATIONS AC output conduit size / AWG range DC input conduit size / AWG range Number of DC inputs Dimensions (HxWxD) Dimensions with Safety Switch (HxWxD) Weight Weight with Safety Switch Cooling Noise Operating Temperature Range Protection Rating
SE10KUS
SE20KUS
SE33.3KUS
10000 10000
20000 20000 4-wire WYE (L1-L2-L3-N) plus PE 244-277-305 422.5-480-529 59.3 - 60 - 60.5 24 1
33300 33300
12
40
Yes 13500
27000 Yes 490 980 425 850 26.5 45 Yes 1MΩ Sensitivity
13.5
98 <3
VA VA Vac Vac Hz A A
45000
40
98.5 <4
W Vdc Vdc Vdc Vdc Adc Adc % W
RS485, Ethernet, ZigBee (optional) With installation of rapid shutdown kit(3) UL1741, UL1699B, UL1998, CSA 22.2 IEEE1547 FCC part15 class B
3/4” minimum / 12-6 AWG 3/4” minimum / 12-6 AWG 3 pairs (with fuses on plus & minus)(4) 21 x 12.5 x 10.5 / 540 x 315 x 260 in/mm 30.5 x 12.5 x 10.5 / 775 x 315 x 260 in/mm 73.2 / 33.2 99.5 / 45 lb/kg 79.7 / 36.2 106 / 48 lb/kg Fans (user replaceable) < 50 < 55 dBA -40 to +140 / -40 to +60 ˚F/˚C NEMA 3R 2 pairs
(1)
For 208V inverters refer to: http://www.solaredge.com/files/pdfs/products/inverters/se-three-phase-us-inverter-208V-datasheet.pdf For other regional settings please contact SolarEdge support. Rapid shutdown kit P/N: contact SolarEdge. (4) Field replacement kit for 1 pair of inputs P/N: DCD-3PH-1TBK. (2) (3)
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 10/2015. V.01. Subject to change without notice.
Module Add-On For North America P300 / P320 / P400 / P405
POWER OPTIMIZER
SolarEdge Power Optimizer
PV power optimization at the module-level
Up to 25% more energy Superior efficiency (99.5%) Mitigates all types of module mismatch losses, from manufacturing tolerance to partial shading Flexible system design for maximum space utilization Fast installation with a single bolt Next generation maintenance with module-level monitoring Module-level voltage shutdown for installer and firefighter safety
USA - CANADA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL
www.solaredge.us
SolarEdge Power Optimizer Module Add-On for North America P300 / P320 / P400 / P405 P320
P300
(for 60-cell modules)
P400
(for high-power 60-cell modules)
(for 72 & 96-cell modules)
P405
(for thin film modules)
INPUT Rated Input DC Power(1) 300 320 400 405 W Absolute Maximum Input Voltage 48 80 125 Vdc (Voc at lowest temperature) MPPT Operating Range 8 - 48 8 - 80 12.5 - 105 Vdc Maximum Short Circuit Current (Isc) 10 11 10.1 Adc Maximum DC Input Current 12.5 13.75 12.63 Adc Maximum Efficiency 99.5 % Weighted Efficiency 98.8 % Overvoltage Category II OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER) Maximum Output Current 15 Adc Maximum Output Voltage 60 85 Vdc OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF) Safety Output Voltage per Power 1 Vdc Optimizer STANDARD COMPLIANCE EMC FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3 Safety IEC62109-1 (class II safety), UL1741 RoHS Yes INSTALLATION SPECIFICATIONS Maximum Allowed System Voltage 1000 Vdc Compatible inverters All SolarEdge Single Phase and Three Phase inverters 128 x 152 x 27.5 / 128 x 152 x 35 / 128 x 152 x 50 / Dimensions (W x L x H) mm / in 5 x 5.97 x 1.08 5 x 5.97 x 1.37 5 x 5.97 x 1.96 Weight (including cables) 760 / 1.7 830 / 1.8 1064 / 2.3 gr / lb Input Connector MC4 Compatible Output Wire Type / Connector Double Insulated; MC4 Compatible Output Wire Length 0.95 / 3.0 1.2 / 3.9 m / ft Operating Temperature Range -40 - +85 / -40 - +185 ˚C / ˚F Protection Rating IP68 / NEMA6P Relative Humidity 0 - 100 % (1)
Rated STC power of the module. Module of up to +5% power tolerance allowed.
PV SYSTEM DESIGN USING A SOLAREDGE INVERTER(2) Minimum String Length (Power Optimizers) Maximum String Length (Power Optimizers) Maximum Power per String Parallel Strings of Different Lengths or Orientations (2)
SINGLE PHASE
THREE PHASE 208V
THREE PHASE 480V
8
10
18
25
25
50
5250
6000
12750
Yes
It is not allowed to mix P405 with P300/P400/P600/P700 in one string.
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 12/2015 V.01. Subject to change without notice.
W
POWER OPTIMIZER
SolarEdge Power Optimizer Module Add-On for Commercial Installations for North America P600 / P700
PV power optimization at the module-level The most cost effective solution for commercial and large field installations Up to 25% more energy Superior efficiency (99.5%) Balance of System cost reduction; 50% less cables, fuses and combiner boxes, over 2x longer string lengths possible Fast installation with a single bolt Next generation maintenance with module-level monitoring Module-level voltage shutdown for installer and firefighter safety Use with two PV modules connected in series USA - CANADA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL
www.solaredge.us
SolarEdge Power Optimizer Module Add-On For Commercial Installations for North America P600 / P700 P600
P700
(for 2 x 60-cell PV modules)
(for 2 x 72-cell PV modules)
INPUT Rated Input DC Power(1) 600 700 W Absolute Maximum Input Voltage 96 125 Vdc (Voc at lowest temperature) MPPT Operating Range 12.5 - 80 12.5 - 105 Vdc Maximum Short Circuit Current (Isc) 10.1 Adc Maximum DC Input Current 12.63 Adc Maximum Efficiency 99.5 % Weighted Efficiency 98.6 % Overvoltage Category II OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING SOLAREDGE INVERTER) Maximum Output Current 15 Adc Maximum Output Voltage 85 Vdc OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM SOLAREDGE INVERTER OR SOLAREDGE INVERTER OFF) Safety Output Voltage per Power Optimizer 1 Vdc STANDARD COMPLIANCE EMC FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3 Safety IEC62109-1 (class II safety), UL1741 RoHS Yes INSTALLATION SPECIFICATIONS Compatible SolarEdge Inverters Three phase inverters Vdc Maximum Allowed System Voltage 1000 Dimensions (W x L x H) 128 x 152 x 43 / 5 x 5.97 x 1.69 128 x 152 x 50 / 5 x 5.97 x 1.96 mm / in Weight (including cables) 994 / 2.2 1064 / 2.34 gr / lb Input Connector MC4 Compatible Output Wire Type / Connector Double Insulated; MC4 Compatible Output Wire Length 1.8 / 5.9 2.1 / 6.89 m / ft Operating Temperature Range(2) -40 - +85 / -40 - +185 ˚C / ˚F Protection Rating IP68 / NEMA6P Relative Humidity 0 - 100 % (1) 2)
Rated combined STC power of 2 modules connected in series. Module of up to +5% power tolerance allowed. For ambient temperature above +70˚C / +158˚F power de-rating is applied. Refer to Power Optimizers Temperature De-Rating Application Note for more details.
PV SYSTEM DESIGN USING A SOLAREDGE INVERTER(3)(4) Compatible Power Optimizers Minimum String Length Maximum String Length
Power Optimizers PV Modules Power Optimizers PV Modules
Maximum Power per String Parallel Strings of Different Lengths or Orientations
THREE PHASE 208V
THREE PHASE 480V
P600 & P700(5) 8 16 30 60 6000(6)
P600 & P700 13 26 30 60 12750(7)
(3)
Yes
P600 and P700 can be mixed in one string. It is not allowed to mix P600/P700 with P300/P320/P400/P405 in one string. In a case of odd number of PV Modules in one string it is allowed to install one P600/P700 power optimizer connected to one PV Module. P700 design with three phase 208V inverters is limited. Use the SolarEdge Site Designer for verification. (6) For SE14.4KUS-208: It is allowed to install up to 6,500W per string when 3 strings are connected to the inverter and when the maximum power difference between the strings is up to 1,000W. (7) For SE33.3KUS: It is allowed to install up to 15,000W per string when 3 strings are connected to the inverter and when the maximum power difference between the strings is up to 2,000W. (4) (5)
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 02/2016. V.01. Subject to change without notice.
W
For Power Optimizer Input SE-CBY
ACCESSORIES
Branch-Cable
Ideal solution for low power modules
Allows to connect 2-4 modules in parallel to a single power optimizer Utilize power optimizers to their full power rating Double insulated PV wire Multi-contact MC4 connectors
USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - ISRAEL
www.solaredge.com
Branch-Cable For Power Optimizer Input SE-CBY
2-Module Branch Cable Part number: SE-CBY-2MM (20 male units & 20 female units in each package)
5 cm 5 cm
5 cm
3-Module Branch Cable Part number: SE-CBY-3MM (10 male units & 10 female units in each package) 26 cm 8.5 cm
26 cm 66 cm
66 cm
4-Module Branch Cable
21 cm
Part number: SE-CBY-4MM (10 male units+ 10 female units in each package)
66 cm
20 cm 8.5 cm
20 cm
66 cm
CONNECTOR Input Connector Output Connector
Multi-contact MC4 Multi-contact MC4
WIRE Maximum System Voltage Maximum Current Wire Size Rated Temperature
600 (UL) / 1000 (IEC) 30 4 -40 – 90
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 07/2014. V.01. Subject to change without notice.
Vdc A mm2 °C
North America SE1000-CDMA2005
COMMUNICATION
SolarEdge Cellular CDMA Kit
Cellular Internet Connectivity
Connects SolarEdge inverters wirelessly to the Internet No need for Internet infrastructure at site Installed within the inverter enclosure for outdoor resilience Enables remote analysis and troubleshooting Comprehensive coverage in the US Immediate monitoring connection feedback
* For a detailed coverage map refer to the following link and select the 1x Coverage option: http://www.showmycoverage.com/mycoverage.jsp?id=AER789IS
USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - ISRAEL - AUSTRALIA
www.solaredge.us
SolarEdge Cellular CDMA Kit North America
SE1000-CDMA2005 SE1000-CDMA2005
UNIT
FUNCTIONAL Number of Inverters Monitored with a Single CDMA Kit Data Sampling Rate Data Upload Rate
1 15 minutes Every four hours
Data Plan
5 year prepaid plan (non-extendable*)
Supported by Inverter Firmware
CPU v3.12xx and above
RF PERFORMANCE Operating Frequency Min.-Max. CDMA 800
Modem transmit: 824-849, Modem receive: 869-894
MHz
Operating Frequency Min.-Max. CDMA 1900
Modem transmit: 1850-1910, Modem receive:1930-1990
MHz
Antenna Connector
RP-SMA
Maximum transmit power Receiver Input Sensitivity (Forward Link RF Level @ FER < 0.5 %)
24
dBm
Typ. -107, Min. -106
dBm
STANDARD COMPLIANCE Safety
cUL, UL60950
Emissions and Radio
FCC parts 15, 22, 24 class B, Industry Canada (IC): ICES-003, RSS-102
INSTALLATION SPECIFICATION Dimensions (L x W)
3.55 x 1.35 / 90.5 x 34.5
in/mm
Operating Temperature
-40 to +185 / -40 to +85
°F/°C
* New CDMA Kit can be purchased when the plan expires
Cellular Tower
Inverter
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 10/2015. V.01. Subject to change without notice.
SolarEdge Portal
COMMUNICATION
SolarEdge RS485 Expansion Kit for North America SE1000-RS485-IF-NA
Expanding Wired Connectivity
Provides an additional RS485 port for enhanced communications Located within the inverter enclosure for outdoor protection Suitable for installation in the SolarEdge Control and Communication Gateway Reduces labor cost with simple and quick installation Allows daisy chain configuration of multiple RS485 buses for communications in commercial installations
USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL
www.solaredge.us
SolarEdge RS485 Expansion Kit for North America
SE1000-RS485-IF-NA SE1000-RS485-IF-NA
UNIT
FUNCTIONAL Maximum number of slave inverters connected on the RS485 bus
31
Maximum number of interconnected RS485 buses
16
Maximum number of Smart Energy Management devices on the RS485 bus
Up to 1 Battery; Up to 2 Meters
Maximum RS485 cable length
3300
ft
1.3 x 1
inch
-40 to 185
°F
INSTALLATION SPECIFICATIONS Dimensions (L x W) Operating Temperature
Connecting a multiple inverter system to external devices
Inverter
Inverter
Inverter
RS485-E RS485-1
RS485-1
Electricity meter Ethernet Router
Internet
Monitoring Portal
Connecting large commercial installations #1
Bus #1
Inverter
#2
#32
Inverter
Inverter Slave
Slave
Slave
Master
RS485-1 #1
Bus #2
Inverter
RS485-E #2
#32
Inverter
Inverter Slave
Slave
Slave
Master
RS485-1 #1
Bus #16
Inverter
RS485-E #2
#32
Inverter
Inverter Slave
Slave RS485-1
Master
Master RS485-E Ethernet Router
Š SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 08/2015. V.01. Subject to change without notice.
Internet
Monitoring Portal
SE1000-CCG-G
COMMUNICATION
SolarEdge Control and Communication Gateway
All-in-one communication gateway
Wireless connections Environmental sensors support Power reduction interface Electricity meter reader Non-SolarEdge inverter data loggers Easy installation - DIN rail and wall mount
USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - ISRAEL
www.solaredge.us
SolarEdge Control and Communication Gateway SE1000-CCG-G POWER Power Supply - Wall Mount
Included, 100-240VAC, EU/UK/US/AU interchangeable, 2-pin plug
Supply Voltage
9-14
Connector Type
terminal block
Power Consumption
Vdc
<2
W
ANALOG SENSOR INPUT Number of Inputs
3 Range
Input 1
Accuracy
Resolution
+/- 1% f.s
10 bit
0-30mV or 0-2V
Input 2
0-2V or 0-10V
Input 3
-20mA – 20mA
COMMUNICATION INTERFACES Ethernet Interface Wireless Connections Power Reduction Interface RS232 Interface
10/100-BaseT ZigBee module (*) 4 control pins, 5V, GND For local connection
SUPPORTED RS485 DEVICES (a) SolarEdge Devices
Yes
Export Inverter Data
Yes
Revenue meters
Yes
Export Data to Non-SolarEdge Logger
Yes
ENVIRONMENTAL Operating Temperatures Protection Rating
-20 to 60 / -4 to 140
°C / °F
IP20 Indoor
MECHANICAL Mounting Type Dimensions (LxWxH) Weight
DIN Rail / Wall mount 161.6 X 90 X 62 / 6.36 x 3.54 x 2.44
mm / Inch
0.5 / 1.1
kg / lbs
STANDARD COMPLIANCE Safety EMC
UL60950-1, IEC-60950-1 FCC Part 15 class B, IEC61000-6-2, IEC61000-6-3
(a) for supported protocols and devices, see link http://www.solaredge.com/files/pdfs/se-gateway-supported-devices.pdf (*) sold separately - see individual product specs for supported locations
SolarEdge Control and Communication Gateway SE1000-CCG-G CONNECTION SCENARIOS
Slave
Slave
Slave
Slave
Example 1
SE Gateway Master
Extend the Distance of Wired Connection RS485
RS485
SolarEdge Portal
RS485
RS485 (up to 1km)
ETH Ethernet Router
Slave
Slave
Slave
Slave
Example 2 Non-SolarEdge Logger & SE Monitoring Parallel Connection
SolarEdge Portal
SE Gateway Master ETH RS485
RS485
RS485
Ethernet Router
RS485
RS485 Non-SolarEdge Logger
Home Gateway
Example 3 ZigBee Wireless Server Connection
SolarEdge Portal Slave
Slave
Slave
Slave
Master
Ethernet ETH Ethernet Router
SolarEdge Control and Communication Gateway SE1000-CCG-G CONNECTION SCENARIOS
Slave
Slave
Slave
Slave
SE Gateway Master
Example 4 RS485
RS485
SolarEdge Portal
RS485
Power Reduction Interface (PRI) Connection
ETH
RS485
Ethernet Router 4 control, 5V, GND
Slave
Slave
Slave
Slave
SE Gateway Master SolarEdge Portal
Example 5 Analog Sensors Connection
ETH
RS485
Ambient Temperature Sensor
Slave
Ethernet Router
Module Temperature Sensor
Slave
Slave
Irradiance Sensor
Slave
SE Gateway Master
Example 6 RS485
RS485
SolarEdge Portal
RS485
Electricity Connection RS485
ETH
Ethernet Router RS485
Electricity Meter
Š SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 12/2014. V.01. Subject to change without notice.
SE1000-CCG-F
Communication
SolarEdge Firefighter Gateway
Central safety management for SolarEdge system
Manual & Automatic system DC Shutdown Real time indication of system DC voltage for safety assurance Emergency stop button for the entire PV system Notification to SolarEdge monitoring portal on system shutdown Easy installation - DIN rail and wall mount
USA - Germany - Italy - France - Japan - China - Israel - Australia
www.solaredge.us
SolarEdge Firefighter Gateway SE1000-CCG-F POWER Power Supply - DIN Rail
Included, 100-240VAC, EU/UK/US/AU interchangeable, 2-pin plug
Supply Voltage
9-14
Connector Type
terminal block
Power Consumption
<2
Vdc W
COMMUNICATION Interfaces Ethernet Interface
10/100-BaseT
Wireless Connections
ZigBee module (*), GSM (*) (**)
Fire Alarm Control Panel Interface
2 alarm inputs, 5V, GND (***)
SolarEdge Inverters
RS485
ENVIRONMENTAL Operating Temperatures
-20 to 60 / -4 to 140
Protection Rating
°C / °F
IP20 Indoor
Mechanical Mounting Type
DIN Rail / Wall mount
Dimensions (L x W x H)
161.6 X 90 X 62 / 6.36 x 3.54 x 2.44
mm / Inch
0.5 / 1.1
kg / lbs
Weight
Standard COMPLIANCE Safety
UL60950-1, IEC-60950-1
EMC
FCC Part 15 class B, IEC61000-6-2, IEC61000-6-3
(*) Sold separately - see individual product specs for supported locations (**) EU only (***) Emergency stop button is not supplied by SolarEdge
Firefighter Gateway
RS485
RS485
Emergency Stop Button
RS485
RS485 (up to 1Km)
Fire Alarm Control Panel
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 12/2013. V.01. Subject to change without notice.
ACCESSORIES
Environmental Sensors SE1000-SEN-IRR-S1 / SE1000-SEN-TAMB-S2 SE1000-SEN-TMOD-S2 / SE1000-SEN-WIND-S1
Ambient Temperature sensor Direct Irradiance sensor Wind Velocity sensor
Module Temperature sensor
Environmental Monitoring of your SolarEdge System Connect environmental sensors to the SolarEdge Control and Communication Gateway for monitoring of your site Used to calculate site performance ratio Irradiance, temperature and wind measurments
USA - CANADA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL
www.solaredge.com
Environmental Sensors
SE1000-SEN-IRR-S1 / SE1000-SEN-TAMB-S2 / SE1000-SEN-TMOD-S2 / SE1000-SEN-WIND-S1
Direct Irradiance SE1000-SEN-IRR-S1
Ambient Temperature
Module Temperature
Wind Velocity
SE1000-SEN-WIND-S1
SE1000-SEN-TAMB-S2
SE1000-SEN-TMOD-S2
0-1.4V
0-10V
4-20mA
4-20mA
0-1400 W/m2
-40 to 90 ˚C / -40 to 194 ˚F
-40 to 90 ˚C / -40 to 194 ˚F
0-50 m/s
±5%
1% of full scale
1% of full scale
±0.5 m/s or ±3% of measuring value
Units
OUTPUT Electrical output range
MEASUREMENT Range Accuracy
INSTALLATION SPECIFICATIONS Control and Communication Gateway (sold separately; SE1000-CCG-G) Dimensions Weight
Enclosure type
Operating Temperature Protection Rating
Needed 154 x 86 x 40 / 6 x 3.5 x 1.5 340 / 0.75
64 x 58 x 34 / 2.5 x 2.3 x 1.3 350 / 0.77
64 x 58 x 34 / 2.5 x 2.3 x 1.3 350 / 0.77
Powder-coated aluminum
Pulver Coated Aluminium
Pulver Coated Aluminium
-20 to 70 / -4 to 155 IP65
-40 to 80 / -40 to 176 -40 to 80 / -40 to 176 IP67 IP67
165 x 105 x 105 / 6.5 x 4.2 x 4.2 750 / 1.65 Housing - Aluminum (AlMgSi1) Cup star - Synthetic, with fibre glass (PC-GF10) Bottom - Synthetic (POM H2320) 0 to 70 / 32 to 155 IP55
mm / in gm / lb
˚C / ˚F
The warranty and service for the sensors is provided directly by Ingenieurbüro Mencke & Tegtmeyer GmbH; for more details, please see http://www.imt-solar.com/products.html
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. 12/2015. V.01. Subject to change without notice.
POWER OPTIMIZER
SolarEdge Power Optimizer Module Embedded Solution OPJ300-LV
PV power optimization at the module-level
A certified junction box (US, IEC) incorporating the field proven SolarEdge power optimizer Up to 25% more energy and superior efficiency (99.5%) Mitigates all types of module mismatch losses, from manufacturing tolerance to partial shading Module-level voltage shutdown for installer and firefighter safety Simplifies system design by eliminating power optimizer selection process Independent optimization technology (IndOP™) - operation with any inverter and no additional hardware or addition of SolarEdge inverter for added benefits Unique Pass-Thru connector for easy module flashing and field replacement USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - AUSTRALIA - THE NETHERLANDS - UK - ISRAEL
www.solaredge.us
SolarEdge Power Optimizer
Module Embedded Solution OPJ300-LV BENEFITS PER SOLUTION
SolarEdge Power Optimizer with SolarEdge Safety & Monitoring Interface and a Non-SolarEdge Inverter 3 3 3 3
SolarEdge Power Optimizer with SolarEdge Inverter
Added Energy Safety Monitoring Multi-facet Design Long String Design
3 3 3 3 3
SolarEdge Power Optimizer with a Non-SolarEdge Inverter 3
3
Power Optimizer connected to a Non-SolarEdge Inverter(1)
Power Optimizer connected to a SolarEdge Inverter
INPUT Rated Input DC Power Absolute Maximum Input Voltage (Voc) MPPT Operating Range Maximum Short Circuit Current (Isc) of connected PV Module Maximum DC Input Current Maximum Efficiency Weighted Efficiency Overvoltage Category
330 55 5 - 55
W Vdc Vdc
10
Adc
12.5 99.5 98.9 II
Adc % %
OUTPUT DURING OPERATION Maximum Output Current
15
10
Adc
Maximum Output Voltage
60
Voc of connected PV module
Vdc
OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM INVERTER OR INVERTER OFF) Safety Output Voltage per Power Optimizer
1
1(2)
Vdc
STANDARD COMPLIANCE EMC
FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3
Safety
IEC62109-1 (class II safety, TUV-SUD), UL1741 (TUV-Rheinland & CSA)
PV Junction Box Material RoHS
EN50548 (TUV-SUD), UL3730 (TUV-Rheinland & CSA) UL-94 (5-VA), UV Resistant Yes
INSTALLATION SPECIFICATIONS Compliant with 600V (UL) / 1000V (IEC)(3) 208x155x29.5 / 8.2x6.1x1.16 700 / 1.5 Double insulated; 6 mm2 ; MC4 Compatible 0.95 / 3.0 -40 - +85 / -40 - +185 IP67 / NEMA6 0 - 100
Maximum Allowed System Voltage Dimensions (WxLxH) Weight (excluding cables) Output Wire Type Output Wire Length Operating Temperature Range Protection Rating Relative Humidity
PV SYSTEM DESIGN
Power Optimizer connected to a SolarEdge Inverter EU North America
Minimum String Length
8 (1ph) 16 (3ph) 18 (3ph-MV)
8 (1ph) 10 (3ph-208V) 18 (3ph-480V)(3)
Maximum String Length
25 (1ph) 50 (3ph)
25 (1ph; 3ph-208V) 50 (3ph-480V)(3)
5250 (1ph) 11250 (3ph) 12750 (3ph-MV)
5250 (1ph) 6000 (3ph-208V) 12750 (3ph-480V)(3)
Maximum Power per String Parallel Strings of Different Lengths Parallel Strings of Different Orientations
Yes Yes
Vdc mm / in g / lb m / ft ˚C /˚F %
Power Optimizer connected to a Non-SolarEdge Inverter(1)
According to inverter design rules & PV module datasheet
No Yes
Available only if Safety & Monitoring Interface (SMI) is installed or if SafeDCTM is disabled during installation by a one-time operation using the SolarEdge Key. When SolarEdge Safety and Monitoring Interface (SMI) is installed and off. (3) 1000V(UL) model available. Note - OPJ power optimizer warranty shall not exceed the maximum of (1) the module product warranty and (2) the module power warranty periods provided by the applicable module manufacturer. (1) (2)
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 01/2016. V.01. Subject to change without notice.
W W W
For North America P300-ZEP
Power Optimizer
SolarEdge Power Optimizer Zep CompatibleTM Module Add-On
Compatible with Zep Groove framed modules Certified Zep CompatibleTM bracket Attaches to module frame without screws - reduces on-roof labor and mounting costs Power optimizer equipment grounded through the bracket Up to 25% more energy Superior efficiency (99.5%)
Mitigates all types of module mismatch losses, from manufacturing tolerance to partial shading Flexible system design for maximum space utilization Next generation maintenance with module-level monitoring Module-level voltage shutdown for installer and firefighter safety
USA - Germany - Italy - France - Japan - China - Israel - Australia
www.solaredge.us
SolarEdge Power Optimizer - Zep CompatibleTM Module Add-On For North America P300-ZEP
P300-ZEP (for 60-cell PV modules) Input Rated Input DC power(1) Absolute Maximum Input Voltage (Voc at lowest temperature) MPPT Operating Range Maximum Short Circuit Current (Isc) Maximum DC Input Current Maximum Efficiency Weighted Efficiency Overvoltage Category
300 48 8 - 48 10 12.5 99.5 98.8 II
W Vdc Vdc Adc Adc % %
OUTPUT DURING OPERATION (POWER OPTIMIZER CONNECTED TO OPERATING INVERTER) Maximum Output Current Maximum Output Voltage
15 60
Adc Vdc
OUTPUT DURING STANDBY (POWER OPTIMIZER DISCONNECTED FROM INVERTER OR INVERTER OFF) Safety Output Voltage per Power Optimizer
1
Vdc
STANDARD Compliance EMC Safety RoHS
FCC Part15 Class B, IEC61000-6-2, IEC61000-6-3 IEC62109-1 (class II safety), UL1741 Yes
Installation Specifications Maximum Allowed System Voltage Dimensions including mounting bracket (W x L x H) Dimensions excluding mounting bracket (W x L x H) Weight (including cables and mounting bracket) Input Connector Output Connector Output Wire Length Operating Temperature Range Protection Rating Relative Humidity (1)
1000 141 x 256 x 40.5 / 5.55 x 10.08 x 1.59 141 x 212 x 40.5 / 5.55 x 8.34 x 1.59 1170 / 2.54 MC4 / Amphenol / Tyco Double Insulated; Amphenol 0.95 / 3.0 -40 - +85 / -40 - +185 IP65 / NEMA4 0 - 100
Vdc mm / in mm / in kg / lb
m / ft ˚C / ˚F %
Rated STC power of the module. Module of up to +5% power tolerance allowed..
Single phase
three phase 208v
three phase 480v
Minimum String Length (Power Optimizers)
8
10
18
Maximum String Length (Power Optimizers)
25
25
50
5250
6000
12750
PV SySTEM DESIGN using a solaredge inverter
Maximum Power per String Parallel Strings of Different Lengths or Orientations
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 12/2013. V.01. Subject to change without notice.
Yes
W
COMMUNICATION
SolarEdge Wireless Communication ZigBee Kit North America SE1000 -ZBGW-K 5 -NA / SE1000 -ZB05 -SLV / SE1000 -ZBRPT 05 -NA
Simple Wireless Connectivity Connects SolarEdge inverters wirelessly to an Internet router ZigBee unit installed within the inverter enclosure for outdoor resilience Antenna external to inverter for wider range Communication to Internet via Ethernet The home gateway supports up to 15 SolarEdge devices (e.g. inverters) on the wireless network
Inverter
USA - GERMANY - ITALY - FRANCE - JAPAN - CHINA - ISRAEL - AUSTRALIA
Home Gateway Internet Router ETH
SolarEdge Portal www
www.solaredge.us
SolarEdge Wireless Communication ZigBee Kit North America SE1000-ZBGW-K5-NA / SE1000-ZB05-SLV / SE1000-ZBRPT05-NA FUNCTIONAL
UNIT
Number of devices that can be monitored
1-15
RF PERFORMANCE Transmit power Receiver Sensitivity Antenna gain Operating Frequency Range Outdoor (LOS) range Indoor range1
18 -102 4 2.4-2.5 400 / 1300 50 / 160
dBm dBm dBi GHz m / ft m / ft
HOME GATEWAY / REPEATER Antenna Power supply Operating temperature Relative humidity (non condensing) Ingress protection
Included Included, 100-240VAC -20 to +60 / -4 to +140 0 - 80 IP20 (Indoor)
˚C / ˚F %
ZIGBEE SLAVE KIT Antenna, mounting bracket and RF cable Dimensions (H x W x D) Ingress protection
CERTIFICATION
Included 22.0 x 32.9 x 4.1 / 0.9 x 1.3 x 0.2 IP65 (IP20 / indoor rated when installed inside Control and Communication Gateway or Firefighter Gateway)
Safety EMC Approvals 1
mm / in
IEC60950, UL60950 FCC(USA), IC(Canada)
Approximate values, may differ depending on specific installation conditions
Scenario A: Basic Kit Part Number: SE1000-ZBGW-K5-NA - 1 x SolarEdge home gateway - 1 x ZigBee slave kit for single SolarEdge device
Inverter
SolarEdge Portal
Home Gateway Master
Ethernet ETH
www
Internet Router Inverters
Scenario B: Adding additional slave units Part Number: SE1000-ZB05-SLV - 1x ZigBee slave kit for connecting multiple devices to the same home gateway
Master
Slave
Slave
Scenario C: Extending range using a repeater Part Number: SE1000-ZBRPT05-NA - 1 x SolarEdge ZigBee Repeater for extending the ZigBee range
SolarEdge Portal
Home Gateway Ethernet ETH
www
Internet Router
Slave
Inverter SolarEdge Portal
Home Gateway (Master)
ZigBee Repeater Slave
(Slave)
© SolarEdge Technologies, Inc. All rights reserved. SOLAREDGE, the SolarEdge logo, OPTIMIZED BY SOLAREDGE are trademarks or registered trademarks of SolarEdge Technologies, Inc. All other trademarks mentioned herein are trademarks of their respective owners. Date: 01/2015. V.01. Subject to change without notice.
Internet Router Ethernet ETH
www