PRODUCT SPEC SHEET CANOPY PMP 430 ACCESS POINT
PMP 58430 ACCESS POINT The Cambium Networks Point-to-Multipoint (PMP) 58430 Access Point and Subscriber Module is the ideal solution for developing, enhancing and extending advanced broadband networks with more than 50 Mbps of total aggregate throughput for data transfer, voice and video applications. The PMP 430 Access Point and Subscriber Module provide wireless Line of Sight (LOS) and near Line of Sight (nLOS) broadband connectivity in the 5.8 GHz spectrum. Cambium Networks provides exceptional wireless broadband connectivity solutions. With more than 3 million modules deployed in thousands of networks around the world, Cambium solutions are proven to provide cost effective, reliable data, voice and video connectivity.
FEATURE
AP Specification
MODEL NUMBER FREQUENCY RANGE CHANNEL WIDTH CHANNEL SPACING ANTENNA GAIN TRANSMIT POWER MAX TRANSMIT POWER EIRP
5780AP
ANTENNA BEAM WIDTH ANTENNA CONNECTION MODULATION LEVELS (ADAPTIVE) FORWARD ERROR CORRECTION PHYSICAL LAYER MAC LAYER CYCLIC PREFIX PACKETS PER SECOND GPS SYNCHRONIZATION SUBSCRIBERS PER SECTOR ARQ QUALITY OF SERVICE MAXIMUM DEPLOYMENT RANGE WITH REFLECTOR ON SM, LOS
SM Specification
5790SM 5725 – 5875 MHz 10 MHz or 20 MHz Configurable on 5 MHz increments 17 dBi sector antenna 10 dBi patch -30 to +19 dBm (to EIRP limit by region) (1 dBm interval) 21 dBm 19 dBm 36 dBm FCC 36 dBm ETSI (20 MHz channel) 33 dBm ETSI (10 MHz channel) 90° sector width 55° azimuth 55° elevation Included 50-ohm N-Type N/A connector 1X= QPSK, 2X= 16 QAM, 3x= 64 QAM ¾ Reed-Solomon block coding OFDM 256 FFT Cambium Proprietary ¼, ⅛, ⅟16 fixed 15,000 6,800 Yes Up to 200 Yes DiffServ QoS 40 Miles
PRODUCT SPEC SHEET CANOPY PMP 430 ACCESS POINT
MAXIMUM AGGREGATE DATA (AIR RATE) THROUGHPUT PER SECTOR
MAXIMUM AGGREGATE USEABLE (ETHERNET) THROUGHPUT PER SECTOR
LATENCY ENCRYPTION NOMINAL RECEIVE SENSITIVITY
ETHERNET INTERFACE PROTOCOLS USED NETWORK MANAGEMENT VLAN TEMPERATURE WIND SURVIVAL WIND LOADING DIMENSIONS (HxWxD) WEIGHT MAXIMUM POWER CONSUMPTION INPUT VOLTAGE CO-LOCATION WITH CANOPY 5.2 GHz CO-LOCATION WITH CANOPY 5.4 GHz CO-LOCATION WITH CANOPY 5.8 GHz CE FCC ID INDUSTRY CANADA CERTIFICATE
10 MHz channel 1X= 12 Mbps 2X= 24 Mbps 3X= 35.5 Mbps 10 MHz channel 1X= 7 Mbps 2X= 15 Mbps 3X= 24 Mbps
20 MHz channel 1X= 24 Mbps 2X= 48 Mbps 3X= 71 Mbps 20 MHz channel 1X= 16.5 Mbps 2X= 33 Mbps 3X= >50 Mbps 5 – 7 ms round trip DES, FIPS 197 Certified 128-bit AES (Option) 10 MHz channel 20 MHz channel 1X= -90 dBm 1X= -87 dBm 2X= -83 dBm 2X= -80 dBm 3X= -76 dBm 3X= -73 dBm 10/100BaseT, half/full duplex, rate auto negotiated (802.3 compliant) IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP HTTP, Telnet, FTP, SNMP v2c 802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority, dynamic port VID -40° C to +55°C (-40° F to +131° F) 0% - 95% humidity, noncondensing 190 km/hour (118 mi/hour) 90 lb 51x21x28 cm 30x9x9 cm (20.2”x 8.25” x 11”) (11.75” x 3.4” x 3.4”) 5.9 kg (13 lbs) w/ antenna 0.45 kg (1 lb) 2.5 kg (5.5 lbs) w/o antenna 19 W 9W 24 to 59 V 24 to 30 V Yes Yes Yes, 10 MHz guard band required or 5 MHz with 3 feet vertical separation required, synchronization required EN 302 502 v1.2.1 ABZ89FT7634 ABZ89FT7635 109W-5780 109W-5790