Toe-In Bar & Accessories

Small wheels on the bar let it slide under the car more easily.

BILLET TIRE SCRIBE

• Use to make a true running line on the face of the tire for measuring toe-in. • Use with 52-79620 Toe-In Gauge. • Spring loaded for easy one person use. • Folds up for easy storage.

DESCRIPTION Billet Tire Scribe PART # PRICE 52-79610 $134.99

DESCRIPTION Power Tape 1/4”x 10’ Power Tape 3/4”x 16’

POWER TAPES

• 1/4” x 10’ for stagger inches only. • 3/4” x 16’ for toe-in, wheelbase, etc. Inches only.

PART # PRICE 52-50870 52-50875 $12.99 $10.99 Similar to our 52-79620 Toe-In Gauge, but this new model measures to the outside of the tire. No scribe line needed. Reads toe to 1/16". Can be done by one person. Billet aluminum. Adjustable up to 88" in width. Great for wide track cars, Corvettes, etc.

DESCRIPTION Toe-In Bar PART # PRICE 52-79622 $379.99

TOE-IN GAUGE

To get a very accurate toe-in measurement, jack up front wheels and scribe a true running line on the face of the tire. (See Billet Tire Scribe.) Place the gauge in front of the tires and align the pointers with the scribe lines. Then, move the gauge to the rear of the tires and align the fixed end with the scribe line. On the other end, loosen the thumb screws and move the slider until the pointer aligns with the other line. Now read the exact toe-in on the scale.

• An accurate way to measure toe-in to within 1/16”. • Easily done by one person. • See 52-79610 Billet Tire Scribe.

DESCRIPTION Toe-In Gauge PART # PRICE 52-79620 $179.99

DESCRIPTION Tire Roll Out Fixture

TIRE ROLL OUT FIXTURE

• Wheel spins freely. • Find leaks, punctures, or tire damage fast. • Includes 10’ stagger tape.

PART # PRICE 52-50853 $99.99

DESCRIPTION Chassis Setup / Tire Chart

CHASSIS SETUP CHARTS

• Punched for 3 ring binder. • Packaged 1 pad, 50 sheets.

PART # PRICE 52-22528 $19.99

DELUXE HD

• Thicker material and deeper bend gives you more rigid plates for better accuracy. • Higher kick-out on bottom holds plate against the wheel better.

Great for cars with high camber LF wheels (bump stop cars). • Magnets on one plate hold the tapes in place.

DESCRIPTION Deluxe HD Toe-In Plates (Pair) PART # PRICE 52-79505 $189.99

Magnets hold tapes in place during use. Easier to read. Great for high camber LF wheel. Magnets hold tapes in place during use. Magnets hold tapes in place as you work.

TOE-IN PLATES

STANDARD

• Quickest and simplest way to measure toe-in. • Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes included. • Formed design is rigid for accuracy and stays put against the tire.

DESCRIPTION Standard Toe-In Plates (Pair) PART # PRICE 52-79501 $84.99

QuickToe™

SETTING TOOL

Here’s a different way to set your critical toe-in. A pair of three-pointed fixtures mount to the wheels (with magnets) for super accuracy. You can even attach a caster/camber gauge to either side. Use tapes included to measure toe directly.

• Includes set of 2 fold-up fixtures, 2 tapes, hard carrying case. • Magnets in the legs hold your steel wheel – one on each side. • Eliminates tire ‘bulge’ error.

DESCRIPTION QuickToe™ Setting Tool PART # PRICE 52-79630 $389.99

Mounts on the wheel for best accuracy. Makes setting toe a quick 1 person job. Attaches to steel wheels.