01 BRASSWARE 3
Water Mixers 5 Taps & Valves 7 Brassware Accessories 12 Tap Spares 16
02 GEYSERS 19
Electrical Geysers 20 Point-of-use Geysers 20
LPG Gas Geysers 21 Geyser Elements 22 Geyser Spares 24 Geyser Valves 26 Geyser Insulation 28
03 FITTINGS 29
Brass Compression Fittings 30 Capillary Fittings 32
Unitwist PPR Fittings 35 Galvanised Fittings 38
Above Ground Waste Fittings 39 Underground Waste Fittings 46
04 PIPING 51
PPR Pipe - Monogold 52 Polycop Pipe 52 PVC Waste Pipe 53 Copper Pipe 53
05 ACCESSORIES 55
Complete Cisterns 56 Cistern Spares 57 Flexible Connectors 60 Plugs & Accessories 62
Toilet Seats 64 Wastes & Traps 67 Sealants & Adhesives 78 Torches & Solder 80
06
FASTENERS 83
Clamps, Holderbatts & Accessories 84
Please be aware that due to the ever expanding and extensive current range of products displayed in this catalogue, products available may vary from goods depicted or described. At the time of going to print, great care and effort was undertaken to ensure that details provided in the catalogue are accurate. Agrinet cannot be held liable for any omissions or errors that might have occurred during the development of this catalogue.
For any questions regarding plumbing products, please contact the Agrinet Plumbing Department / Service Centre at Samrand: (012) 657 2222 | Bellville: (021) 959 5420
Agrinet reserves the right at all times to make changes to stocked ranges and products. Please refer to www.agrinet.co.za for all the latest information. E&OE.
Type: Basin Material: Brass Finish: Chrome Action: Single Lever Feature: One Hand Use Guarantee: 12 Year MOQ:1
LTE001M 15mm
Type: Wall Type Material: Brass Finish: Chrome Action: Single Lever Feature: One Hand Use Guarantee: 12 Year MOQ:1
LTE003M 15mm
Type: Wall Type Material: Brass Finish: Chrome Action: Single Lever Feature: One Hand Use Guarantee: 12 Year MOQ:1
LTE005M 15mm
Type: Deck Type Material: Brass Finish: Chrome Action: Single Lever Feature: One Hand Use Guarantee: 12 Year MOQ:1
LTE004M 15mm
Type: Undertile Material: Brass Finish: Chrome Action: Single Lever Feature: One Hand Use Guarantee: 12 Year MOQ:1
LTE006M 15mm
Type: Undertile with Diverter Material: Brass Finish: Chrome Action: Single Lever Feature: One Hand Use Guarantee: 12 Year MOQ:1
LTE007M 15mm
Type: Undertile Material: Brass Finish: Chrome Action: Single Lever Feature: One Hand Use Guarantee: 1 Year MOQ:1
LIS0001A 15mm
Type: Basin Material: Brass Finish: Chrome Action: Single Lever Feature: One Hand Use Guarantee: 1 Year MOQ:1
LIS0002A 15mm
Type: Kitchen Material: Brass Finish: Chrome Action: Single Lever Feature: One Hand Use Guarantee: 1 Year MOQ:1
LIS0004A 15mm
Type: Deck Type Material: DZR Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 12 Year MOQ:1
LVI004S 15mm
Type: Swivel Spout Material: DZR Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 12 Year MOQ:1
LVI002S 15mm
Type: Wall Type Material: DZR Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 12 Year MOQ:1
LVI005S 15mm
Type: Bib Long Material: DZR Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 12 Year MOQ:1
LVI011S 15mm
Type: Bib Short Material: DZR Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 12 Year MOQ:1
LVI010S 15mm
Type: Bib Washing Machine Material: DZR Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 12 Year MOQ:1
LVI009S 15mm
Type: Pillar Material: DZR Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 12 Year MOQ:1
LVI008S 15mm
Type: Cast Spout Material: DZR Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 12 Year MOQ:1
LVI001S 15mm
Type: Bath Wall Type Material: DZR Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 12 Year MOQ:1
LVI003S 15mm
Type: Under Tile
Material: DZR Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 12 Year MOQ:1
LVI006S 15mm
Type: Bib Material: Brass Finish: Rough Brass Action: Full Turn Spindle Guarantee: 1 Year MOQ:1 333209-15-20 15mm x 3/4”
Type: Stop Tap Material: Brass Finish: Rough Brass Action: Full Turn Spindle Guarantee: 1 Year MOQ:1 LCZ0801A 15mm LCZ0802A 22mm
Type: Bib Short Material: Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 1 Year MOQ:2
LTB1012A 15mm
Type: Bib Washing Machine Material: Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 1 Year MOQ:2
LTH0012A 15mm x 3/4”
Type: Pillar Material: Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 1 Year MOQ:2
LTP1013A 15mm
Type: Sink Wall Material: Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 1 Year MOQ:1
LMS4001A 15mm
Type: Under Tile Material: Brass Finish: Chrome Action: Full Turn Spindle Guarantee: 1 Year MOQ:2 LUS0001A 15mm
SABS
SABS
Type: Pillar Material: PPR Finish: White Action: Full Turn Spindle Feature: Slip Clutch Guarantee: 26 Year MOQ:1
PC15PT-W 15mm
SABS
Type: Stop Tap Material: PPR Finish: Brown Action: Full Turn Spindle Feature: Slip Clutch Guarantee: 27 Year
PCST15 15mm PCST22 22mm
Type: Bib Material: PPR Finish: Brown Action: Full Turn Spindle Feature: Slip Clutch Guarantee: 25 Year MOQ:1
PC15BT 15mm x 3/4” PC22BT 22mm x 3/4”
MOQ:1
SABS
Type: Bib with standpipe Material: PPR Finish: Brown Action: Full Turn Spindle Feature: Slip Clutch Guarantee: 25 Year MOQ:1
PC15SP 15mm x 3/4”
PC22SP 22mm x 3/4”
BELATORI
Round, Chromed, DZR Brass MOQ:1 LNS001R Fit in bath overflow
BELATORI
PULSE LARGE ROUND SHOWER ROSE
BELATORI
Square, Chromed, DZR Brass
MOQ:1 LNS002R Fit in bath overflow
ABS, Chromed, Single-Function MOQ:1 LSH1001RD 100mm
BELATORI
Round, ABS, Chromed, Single-Function MOQ:1 LSH2001RD 230mm
PULSE SQUARE SHOWER ROSE
BELATORI
Square, ABS, Chromed, Single-Function MOQ:1 LSH2001SQ 200mm
SHOWER ROSE ROUND STAINLESS STEEL
Round, Stainless Steel MOQ:1 LSH100RDSS 100mm
SHOWER ROSE ROUND STAINLESS STEEL
Round, Stainless Steel
LSH150RDSS 150mm
MOQ:1
SHOWER ROSE SQUARE
STAINLESS STEEL
Square, Stainless Steel
MOQ:1 LSH150SQSS 150mm
SHOWER ROSE SQUARE
STAINLESS STEEL
Square, Stainless Steel MOQ:1 LSH200SQSS 200mm
PULSE SHOWER ARM & FLANGE
LONG
400mm Overhead
BELATORI
MOQ:1 LSA400RD 15mm Inlet/outlet
PULSE SHOWER RAIL SET
BELATORI
Hose, Hand Shower, Rail, Soap Dish
MOQ:1 LSR0001S 15mm Inlet
PULSE HAND SHOWER SINGLE FUNCTION
BELATORI
ABS, Chromed, Single-Function MOQ:1 LHS1001RD 100mm
PULSE SHOWER ROSE
Chrome Plated
BELATORI
MOQ:1 LSH0001R 75mm
SHOWER ARM & FLANGE
Chrome Plated
BELATORI
LSA2001A 15mm Inlet/outlet
MOQ:1
SHOWER ROSE SPRING
Chrome Plated, Multi-Function
MOQ:1 LSH2002A 15mm Inlet
AGRINET . PLUMBING . BRASSWARE
ABS, Chromed, Single-Function
MOQ:1
ANGLE REGULATING VALVE
Standard, Spindle-type
LCD0902A 1/2” x 1/2”
BELATORI
MOQ:1
Pre-Packed Loose
ISOLATING BRASS VALVE LEVER
BELATORI
ISOLATING BRASS VALVE STRAIGHT
BELATORI
WASHING MACHINE ANGLE VALVE
BELATORI
Standard, 1/4 Turn-type
LCD0901A 1/2” x 3/4”
MOQ:1
CXC, Lever-type
LCD0503A 15 x 15mm
CXC, Screwdriver-type
WASHING MACHINE ISOLATING BRASS VALVE
BELATORI
CP BRASS SWIVEL STRAIGHT MINI BALL VALVE
VALVE BRASS MINI LEVER BELATORI
MIXFI, Lever-type
LCD0701A 1/2” x 1/2”
MOQ:1
CXMI, Lever-type
LCD0401A 15mm x 3/4”
MOQ:1
CXFI, Screwdriver-type, with swivel nut.
LCD0301A 15mm x 1/2”
MOQ:1
EXTENTION PCE CP & FLANGE
Chrome Plated
MOQ:1 MI11 75mm x 1/2”
BELATORI
Cylinder to place over garden tap and to lock it.
LCD1010A Black
MOQ:1
Full threaded brass nipple.
LZZ1525A 15mm x 25mm
LZZ1550A 15mm x 50mm LZZ15100A 15mm x 100mm
MOQ:1
Full threaded brass nipple.
LZZ2250A 22mm x 50mm
LZZ22100A 22mm x 100mm
MOQ:1
Brass replacement for plastic pillar tap nuts.
MOQ:1
CHAIN BATH
Chrome Plated
LZZ4001A 15mm
LZZ4002A 20mm
LZZ4004A 32mm
LZZ4005A 40mm
LZZ4020A 400mm
MOQ:10
Pre-Packed
SINK
C.T.D
Material: Stainless Steel / Rubber Application: Replacement MOQ:1
C.T.D
Material: Rubber Application: Replacement MOQ:1
LWW0090B 90mm
BELATORI
Material: Brass Application: Replacement MOQ:1 LWM0032P Universal
BELATORI
Material: Chrome Plated Brass Application: Replacement MOQ:1
LWW0032P 32mm
LWW0040P 40mm
BELATORI
Application: Replacement MOQ:1
LTF0001A Single
BELATORI
Application: Replacement MOQ:1
LTF0002A Double
BELATORI
Type: Single Lever Material: Plastic/Ceramic Application: Replacement MOQ:1
LTC0032H 32mm LTC0040H 40mm
Type: Single Lever Material: Plastic/Ceramic Application: Replacement MOQ:1
LTC0032F 32mm LTC0040F 40mm
Type: Heavy Patten Material: Rubber Application: Replacement MOQ:1
333C097-15 15mm
Type: Light Patten Material: Rubber Application: Replacement MOQ:1
333C098-15 15mm
Type: Heavy Patten Material: Rubber Application: Replacement MOQ:1
333C097-20 20mm
The popular Trendline slim design range provides the ideal solution for the end user looking for a top quality, peak performing water heating system that delivers on comfort, hidden forget me efficiency and measurable savings.
SABS
LGB050L 50 ℓ
LGB100L 100 ℓ
LGB150L 150 ℓ
MOQ:1
The popular Highline design range provides the ideal solution for the end user looking for a top quality, peak performing water heating system that delivers on comfort, hidden forget me efficiency and measurable savings.
SABS
LGB200L 200 ℓ
MOQ:1
Electric Point-of-use. High quality/performance of Ariston water heaters available in a compact water heating solution.
SABS
LGO10L 10 ℓ
ARISTON
MOQ:1
Electric
Point-of-use. High quality/performance of Ariston water heaters available in a compact water heating solution.
SABS
LGO15L 15 ℓ
MOQ:1
ARISTON
Electric Point-of-use. High quality/performance of Ariston water heaters available in a compact water heating solution.
SABS
LGO30L 30 ℓ
MOQ:1
LPG GAS
The open chamber gas-fired instant water heaters range with outstanding reliability and easy to set.
SABS MOQ:1
LGG11L 11 ℓ
LPG GAS
The open chamber gas-fired instant water heaters range with outstanding reliability and easy to set.
SABS MOQ:1
LGG14L 14 ℓ
LPG GAS
The open chamber gas-fired instant water heaters range with outstanding reliability and easy to set.
SABS
LGG16L 16 ℓ
MOQ:1
Domestic
The Aures electric instantaneous water heaters are the ideal solution for having hot water immediately ready right after you open the tap.
SABS
LGI35SP 3.5KW 220V
Domestic
MOQ:1
The Aures electric instantaneous water heaters are the ideal solution for having hot water immediately ready right after you open the tap.
SABS
LGI7SP 7KW 220V
MOQ:1
Domestic
The Aures electric instantaneous water heaters are the ideal solution for having hot water immediately ready right after you open the tap.
SABS
LGI5MP 5KW 220V
LGI12MP 12KW 3-PHASE
MOQ:1
Single circuit heating element for domestic hot water cylinders. It incorporates a pocket to accept the VKF type thermostat.
MOQ:1
HW2682732 2 kW 100 ℓ
SATCHWELL
Single circuit heating element for domestic hot water cylinders. It incorporates a pocket to accept the VKF type thermostat.
MOQ:1
HW2682739 3 kW 150 ℓ
SATCHWELL
Single circuit heating element for domestic hot water cylinders. It incorporates a pocket to accept the VKF type thermostat. MOQ:1
HW2682743 4 kW 200 ℓ
Single circuit heating element specially designed for areas where the water supply is hard or corrosive and where standard copper sheathed elements are not suitable. The sheath material is Incoloy 825, which has a corrosion resistance much superior. MOQ:1
HW2682734 2 kW 100 ℓ
Single circuit heating element specially designed for areas where the water supply is hard or corrosive and where standard copper sheathed elements are not suitable. The sheath material is Incoloy 825, which has a corrosion resistance much superior. MOQ:1
HW2682741 3 kW 150 ℓ
Single circuit heating element specially designed for areas where the water supply is hard or corrosive and where standard copper sheathed elements are not suitable. The sheath material is Incoloy 825, which has a corrosion resistance much superior. MOQ:1
HW2682746 4 kW 200 ℓ
Domestic geyser element with brass Euro type boss, rating 230V. Soft water type, application Kwikot type geysers 50L to 200L.
HW2682770 2 kW 100 ℓ
MOQ:1
Domestic geyser element with brass Euro type boss, rating 230V. Soft water type, application Kwikot type geysers 50L to 200L.
HW2682772 3 kW 150 ℓ
MOQ:1
Domestic geyser element with brass Euro type boss, rating 230V. Soft water type, application Kwikot type geysers 50L to 200L.
ELK-140-KWI 4 kW 200 ℓ
MOQ:1
Single circuit heating element specially designed for areas where the water supply is hard or corrosive and where standard copper sheathed elements are not suitable. The sheath material is Incoloy 825, which has a corrosion resistance much superior. MOQ:1
Single circuit heating element specially designed for areas where the water supply is hard or corrosive and where standard copper sheathed elements are not suitable. The sheath material is Incoloy 825, which has a corrosion resistance much superior. MOQ:1
GEYSER ELEMENT FLANGED WITH POCKET HARD WATER KWIKHEAT SATCHWELL
Single circuit heating element specially designed for areas where the water supply is hard or corrosive and where standard copper sheathed elements are not suitable. The sheath material is Incoloy 825, which has a corrosion resistance much superior.
MOQ:1
Single circuit heating element specially designed for areas where the water supply is hard or corrosive and where standard copper sheathed elements are not suitable. The sheath material is Incoloy 825, which has a corrosion resistance much superior. MOQ:1
HW2682787 3 kW 150 ℓ
GEYSER ELEMENT FLANGED WITH POCKET KWIKHEAT
SATCHWELL
Single circuit heating element for domestic hot water cylinders.
HW2682788 2 kW 100 ℓ
MOQ:1
GEYSER ELEMENT FLANGED WITH POCKET KWIKHEAT
SATCHWELL
Single circuit heating element for domestic hot water cylinders.
MOQ:1
HW2682789 3 kW 150 ℓ
SATCHWELL
Single circuit heating element for domestic hot water cylinders.
HW2682790 4 kW 200 ℓ
MOQ:1
GEYSER ELEMENT FRANKE SPIRAL WITH POCKET
SATCHWELL
Single circuit heating element for domestic hot water cylinders.
HW2682791 2 kW 100 ℓ
MOQ:1
GEYSER ELEMENT FRANKE SPIRAL WITH POCKET
SATCHWELL
Single circuit heating element for domestic hot water cylinders.
MOQ:1
HW2682792 3 kW 150 ℓ
SATCHWELL
Single circuit heating element for domestic hot water cylinders.
HW2682793 4 kW 200 ℓ
Single circuit heating element for domestic hot water cylinders. This unit doesn’t have a thermostat pocket.
Single circuit heating element for domestic hot water cylinders. This unit doesn’t have a thermostat pocket.
MOQ:1
MOQ:1
ELS-106-KWI 2 kW 100 ℓ
ELS-108-KWI 3 kW 150 ℓ
MOQ:1
SATCHWELL
Application: For use on Spiral elements. Designed to control the temperature of domestic electric geysers.
SATCHWELL
Application: For use on Boss elements. Designed to control the temperature of a domestic electric water heater. It incorporates a built-in fuse link to ensure that the safe, maximum temperature for hot water cylinders cannot be exceeded.
SATCHWELL
Application: For use on Boss elements. Designed to control the temperature of a domestic electric water heater. It incorporates a built-in fuse link to ensure that the safe, maximum temperature for hot water cylinders cannot be exceeded.
MOQ:1
SATCHWELL
Application: Spare Part Replacement thermostat pocket.
HW2682794 for VK11
MOQ:1
SATCHWELL
Application: Spare Part Replacement thermostat pocket.
HW2682795 for VK7
MOQ:1
SATCHWELL
Application: Replacement Part 400mm Sacrificial anode for Franke 100L geyser. Protects & prolongs life span of the geyser through electrolysis, helps prevent rust in the tank.
HW2682784 Universal
MOQ:1
Application: Replacement Part 710mm Sacrificial anode for Franke 150L geyser. Protects & prolongs life span of the geyser through electrolysis, helps prevent rust in the tank.
HW2682785 Universal
MOQ:1
Application: Spare Gasket
ARISTON
Standard flange gasket for a Heattech geysers.
LGG0002A Heattech
SATCHWELL
MOQ:1
Application: Spare Gasket
Standard flange gasket for geysers with a Boss type element.
MOQ:1 ELG-54
Application: Spare Gasket Flange gasket for Kwikot geysers with a spiral element.
FLG-337
MOQ:1
Application: Tool Spanner specifically designed to easily install and maintain single circuit heating elements used normally with warm water geysers.
HW2682749 Universal
MOQ:1
ADVANCED VALVES CC
This is a water pressure control valve fitted to the cold water supply to the geyser.
MOQ:1
LMF0012A 15mm 400 Kpa
LMF0013A 15mm 600 Kpa
LMF0014A 22mm 400 Kpa
LMF0016A 22mm 600 Kpa
RECONED PRESSURE CONTROL KWIK FLO K400
VALVECO
RECONED PRESSURE CONTROL
MASTER FLO M400
VALVECO
Reconditioned valve
LMFK400 22mm 400 Kpa
Reconditioned valve
ADVANCED VALVES CC
MOQ:1
MOQ:1
LMFM400 22mm 400 Kpa
FI
Mounted on the geyser towards often on the opposite side to the drain cock. This is a vital component.
MOQ:1
KH1.404CX 20mm 400 Kpa
HW2682773 20mm 600 Kpa
ADVANCED VALVES CC MI
Mounted on the geyser towards often on the opposite side to the drain cock. This is a vital component.
MOQ:1
KH1.404CXM 20mm 400 Kpa
ADVANCED VALVES CC
MOQ:1
LGDC01F 3/4” Female
ADVANCED VALVES CC
A drain cock is installed on the cold water inlet of a Geyser. It serves as the inlet and drain port of a geyser.
LGDC02M 3/4” Male
MOQ:1
ADVANCED VALVES CC
These are small brass components mounted at the 30cm length of pipe. They two vacuum breakers stand vertically about 30cm above the geyser.
MOQ:1
KHN4-150CX 15mm CXC
LSG0008A 22mm CXC
MARLEY
Pressure control valve with adjusting nut that turns clockwise to give a better flow of water to taps and showers.
MOQ:1
LCV0103A 100 Kpa
MARLEY
Relief valve must be fitted 300mm above geyser. Release air and drip from time to time due to the expansion of water reheating.
LCV0105A 100 Kpa
MOQ:1
MARLEY
Consists of one pressure control valve and one relief valve.
LCV0101A Twin Pack 100 Kpa
MOQ:1
MARLEY
Relief valve must be fitted 300mm above geyser. Release air and drip from time to time due to the expansion of water reheating.
LCV0305A RED 400 Kpa
MOQ:1
MARLEY
Pressure control valve with adjusting nut that turns clockwise to give better flow of water to taps and showers.
LCV0303A RED 400 Kpa
MOQ:1
1.8m Solid wall
This adhesive foam tape is used in conjunction with COPPER PIPE INSULATION 1.8m. It is used on the joints to keep sections together and to make sure temperature transfers stay to a minimum.
MOQ:1
LPI1525R1 16mm x 25mm
LPI2225R1 22mm x 25mm
10m Adhesive
This adhesive foam tape is used in conjunction with COPPER PIPE INSULATION 1.8m. It is used on the joints to keep sections together and to make sure temperature transfers stay to a minimum.
MOQ:1
LPITAPE10M 3mm
Geyser blankets are made with aluminium laminated SABS material and is recommended by Eskom. This blanket fits all makes and sizes for inside and outside use. Can also be used with cold- or hot water pipes. Material is UV treated. No special tools required. Includes 5m aluminium adhesive tape.
MOQ:1
LSB1010A 3.4m x 1.25m
1.8m Slitted Adhesive
Superlon is an elastomeric nitrile closed cell foamed insulation engineered and designed specifically to control condensation. Available in various sizes and wall thicknesses for various applications. Service temperature maximum 110°C for and minimum -50°C for pipes. Tubing is available in 1.8m Lengths Slit/Adhesive for ease of installation. Ozone friendly and corrosion resistance.
MOQ:1
LPI0001A 15mm x 10mm
LPI0002A 22mm x 10mm
LPI0003A 28mm x 13mm
LPI0004A 35mm x 13mm
LPI0005A 42mm x 13mm
LPI0006A 54mm x 13mm
Samrand | 111 Sterling Road, Samrand, 0157 Private Bag X165, Centurion 0046
T. +27 12 657 2222 | F. +27 12 657 2123
E. enquiries@agrinet.co.za
Bellville | Emerald Street, Bellville Industrial Park, Bellville South, 7530 PO Box 1300, Sanlamhof T. +27 21 959 5420 | F. +27 21 951 4794
E. belbestel@agrinet.co.za
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: Male BSP Thread Size: 1/2” Spares Available: Brass Ring/Backnut MOQ:10
LCC0501A 15mm x 1/2” CXMI LCC0502A 22mm x 3/4” CXMI
C
X to FI Female Iron MI Male Iron
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: n/a Thread Size: n/a Spares Available: Brass Ring/Backnut MOQ:10
LCC0101A 15mm CXC LCC0102A 22mm CXC
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: Female BSP Thread Size: 1/2” Spares Available: Brass Ring/Backnut MOQ:10
LCC0301A 15mm x 1/2” CXFI LCC0302A 22mm x 3/4” CXFI
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: n/a Thread Size: n/a Spares Available: Brass Ring/Backnut MOQ:10
LCC0202A 22m x 15mm CXC
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: Female BSP Thread Size: 1/2” Spares Available: Brass Ring/Backnut MOQ:10
LCC0401A 15mm x 3/4” CXFI
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: Male BSP Thread Size: 3/4” Spares Available: Brass Ring/Backnut MOQ:10
LCC0601A 15mm x 3/4” CXMI
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: n/a Thread Size: n/a Spares Available: Brass Ring/Backnut MOQ:10
LCE0101A 15mm CXC
LCE0102A 22mm CXC
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: n/a Thread Size: n/a Spares Available: Brass Ring/Backnut MOQ:10
LCE0202A 22mm x 15mm CXC
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: Female BSP Thread Size: 1/2” Spares Available: Brass Ring/Backnut MOQ:10
LCE0501A 15mm x 1/2” CXFI
SABS - DZR Brass
Application: Copper and Polycop Tubing
Thread: Male BSP
Thread Size: 1/2” & 3/4”
Spares Available: Brass Ring/Backnut MOQ:10
LCE0701A 15mm x 1/2” CXMI
LCE0702A 22mm x 3/4” CXMI
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: Female BSP Thread Size: 3/4” Spares Available: Brass Ring/Backnut MOQ:10
LCE0601A 15mm x 3/4” CXFI
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: Male BSP Thread Size: 3/4”
Spares Available: Brass Ring/Backnut MOQ:10
LCE0801A 15mm x 3/4” CXMI
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: Female BSP
Thread Size: 1/2” & 3/4” Spares Available: Brass Ring/Backnut MOQ:10
LCE0901A 15mm x 1/2” CXFI
LCE0902A 22mm x 3/4” CXFI
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: n/a Thread Size: n/a Spares Available: Brass Ring/Backnut MOQ:10
LCT0101A 15mm CXCXC LCT0102A 22mm CXCXC
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: Female BSP Thread Size: 1/2” Spares Available: Brass Ring/Backnut MOQ:10
LCT0701A 15mm x 1/2” CXCXFI
LCT0702A 22mm x 1/2” CXCXFI
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: Female BSP
Thread Size: 3/4” Spares Available: Brass Ring/Backnut MOQ:10
LCT0703A 22mm x 3/4” CXCXFI
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: Female BSP
Thread Size: 1/2” & 3/4” Spares Available: Brass Ring/Backnut MOQ:10
LCT0703A 22mm x 3/4” CXCXFI
LCT0901A 15mm x 1/2” CXCXMI
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: n/a Thread Size: n/a Spares Available: Brass Ring/Backnut MOQ:10
LCT0201A 22 x 22 x 15mm CXCXC
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: n/a Thread Size: n/a Spares Available: Brass Ring/Backnut MOQ:10
LCZ0101A 15mm C
LCZ0102A 22mm C
C
Suited to reduce pipe.
Consumables: Gas, Solder, Flux Tools Needed: Blowtorch Thread: n/a Thread Size: n/a MOQ:10
LSC0901A 22mm x 15mm CXC
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: n/a Thread Size: n/a MOQ:10
LCZ0601A 15mm Spare LCZ0602A 22mm Spare
SABS - DZR Brass
Application: Copper and Polycop Tubing Thread: n/a Thread Size: n/a
MOQ:10
LCZ0301A 15mm Spare
LCZ0302A 22mm Spare
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch
Thread: Female BSP
Thread Size: 3/4” MOQ:10
LSC0501A 15mm x 3/4” CXFI
LSC0402A 22mm x 3/4” CXFI
Suited to reduce fittings.
Consumables: Gas, Solder, Flux Tools Needed: Blowtorch Thread: n/a Thread Size: n/a MOQ:10
LSC0802A 22mm x 15mm CXMC
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch
Thread: Female BSP Thread Size: 1/2” MOQ:10
LSC0401A 15mm x 1/2” CXFI
Consumables: Gas, Solder, Flux Tools Needed: Blowtorch
Thread: Male BSP Thread Size: 1/2” MOQ:10
LSC0601A 15mm x 1/2” CXMI
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch
Thread: Male BSP Thread Size: 3/4” MOQ:10
LSC0701A 15mm x 3/4” CXMI
LSC0602A 22mm x 3/4” CXMI
C
X to FI Female Iron MI Male Iron
Product has been designed to ‘slip’ over copper tubing, and is generally used for repair jobs.
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch Thread: n/a Thread Size: n/a MOQ:10
LSC0101A 15mm CXC
LSC0102A 22mm CXC
This product is ideal for joining pipes, because of the indentation in the middle of the coupler.
Consumables: Gas, Solder, Flux Tools Needed: Blowtorch
Thread: n/a Thread Size: n/a MOQ:10
LSC0201A 15mm CXC LSC0202A 22mm CXC
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch
Thread: n/a Thread Size: n/a MOQ:10
LSQ0101A 15m CXC
LSQ0102A 22mm CXC
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch
Thread: n/a Thread Size: n/a MOQ:10
LSE0101A 15mm CXC
LSE0102A 22mm CXC
Consumables: Gas, Solder, Flux Tools Needed: Blowtorch Thread: n/a Thread Size: n/a MOQ:10
LSE0301A 15mm CXC LSE0302A 22mm CXC
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch
Thread: n/a Thread Size: n/a MOQ:10
LSE0402A 22mm x 15mm CXC
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch
Thread: Female BSP Thread Size: 1/2”
LSE0501A 15mm x 1/2” CXFI
MOQ:10
Consumables: Gas, Solder, Flux Tools Needed: Blowtorch
Thread: Female BSP Thread Size: 3/4”
LSE0602A 15mm x 3/4” CXFI LSE0502A 22mm x 3/4” CXFI
MOQ:10
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch
Thread: Male BSP Thread Size: 1/2” MOQ:10
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch
Thread: Male BSP Thread Size: 3/4” MOQ:10
LSE0801A 15mm x 3/4” CXMI
LSE0702A 22mm x 3/4” CXMI
Consumables: Gas, Solder, Flux Tools Needed: Blowtorch Thread: Female BSP Thread Size: 1/2” MOQ:10
LSE0901A 15mm x 1/2” CXFI LSE0902A 22mm x 3/4” CXFI
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch Thread: n/a Thread Size: n/a MOQ:10
LSZ0101A 15mm C LSZ0102A 22mm C
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch
Thread: n/a Thread Size: n/a MOQ:10
LST0101A 15mm CXCXC
LST0102A 22mm CXCXC
Consumables: Gas, Solder, Flux Tools Needed: Blowtorch Thread: n/a Thread Size: n/a MOQ:10
LST0202A 22mm x 15mm CXCXC
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch
Thread: Female BSP Thread Size: 1/2” MOQ:10
LST0601A 15mm x 1/2” CXCXFI
Consumables: Gas, Solder, Flux
Tools Needed: Blowtorch
Thread: Female BSP Thread Size: 3/4” MOQ:10
LST0602A 22mm x 3/4” CXCXFI
C
SABS
Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2000A 15mm CXC
SABS
Material: PPR UV Resistance
Pipe Size: 22mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2000B 22mm CXC
15MMX1/2INCH
SABS
Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR Temperature: -20°C to 40°C
UNITWIST
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2002A 15mm x 1/2” CXFI
UNITWIST COUPLER STR CXFI 22MMX3/4INCH
SABS
Material: PPR UV Resistance
Pipe Size: 22mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2002B 22mm x 3/4” CXFI
15MMX1/2INCH
SABS
Material: PPR UV Resistance
Pipe Size: 15mm
Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year
UT2001A 15mm x 1/2” CXMI
UNITWIST COUPLER STR CXMI 22MMX3/4INCH
SABS
Material: PPR UV Resistance
Pipe Size: 22mm
Pressure: 20BAR Temperature: -20°C to 40°C
MOQ:1
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2001B 22mm x 3/4” CXMI
UNITWIST
UNITWIST
SABS
Material: PPR UV Resistance
Pipe Size: 15mm & 22mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2000R 22mm x 15mm CXC (RED)
UNITWIST COUPLER STR CXFI RED 15MMX3/4INCH
UNITWIST
SABS
Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2002R 15mm x 3/4” CXFI (RED)
UNITWIST COUPLER STR CXMI RED 15MMX3/4INCH
UNITWIST
SABS
Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year
MOQ:1
UT2001R 15mm x 3/4” CXMI (RED)
SABS
Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2020A 15mm CXC
SABS
Material: PPR UV Resistance
Pipe Size: 22mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2020B 22mm CXC
SABS
Material: PPR UV Resistance
Pipe Size: 15mm & 22mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2020R 22mm x 15mm CXC (RED)
SABS
Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2022A 15mm x 1/2” CXFI
SABS
Material: PPR UV Resistance
Pipe Size: 22mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2022B 22mm x 3/4” CXFI
SABS Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR Temperature: -20°C to 40°C
UNITWIST
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2022R 15mm x 3/4” CXFI (RED)
SABS
Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year
UT2021A 15mm x 1/2” CXMI
SABS
Material: PPR UV Resistance
Pipe Size: 22mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year
UNITWIST ELBOW CXMI RED 15MMX3/4INCH
SABS
Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR
Temperature: -20°C to 40°C
UNITWIST
Ease of use: Push Fit + Compression Guarantee: 25 Year
MOQ:1
MOQ:1
UT2021B 22mm x 3/4” CXMI
UT2021R 15mm x 3/4”
MOQ:1
(RED)
UNITWIST
SABS
Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2024A 15mm x 1/2” CXFI
SABS
Material: PPR UV Resistance
Pipe Size: 22mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2024B 22mm x 3/4” CXFI
SABS
Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2005A 15mm
UNITWIST
UNITWIST
SABS
Material: PPR UV Resistance
Pipe Size: 22mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2005B 22mm
UNITWIST
SABS
Material: PPR UV Resistance
Pipe Size: 15mm & 22mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2043R 22mm x 15mm CXCXC
SABS
Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2041A 15 x 15 x 1/2” CXCXF
SABS
Material: PPR UV Resistance
Pipe Size: 15mm & 22mm
Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2045R 15 x 15 x 1/2” CXCXC
UNITWIST
SABS
Material: PPR UV Resistance
Pipe Size: 15mm & 22mm
Pressure: 20BAR
Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year
MOQ:1
UT2044R 22 x 15 x 22mm CXCXC (RED)
SABS
Material: PPR UV Resistance
Pipe Size: 15mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2040A 15mm CXCXC
UNITWIST
UNITWIST TEE CXCXF 22X22MMX3/4INCH
UNITWIST
SABS
Material: PPR UV Resistance
Pipe Size: 22mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year
UT2040B 22mm CXCXC
MOQ:1
SABS
Material: PPR UV Resistance
Pipe Size: 22mm Pressure: 20BAR Temperature: -20°C to 40°C
Ease of use: Push Fit + Compression Guarantee: 25 Year MOQ:1
UT2041B 22 x 22 x 3/4” CXCXF
Type: Straight Material: Stainless Steel and Rubber Connection: Clamp MOQ:1
LSSN0050 50mm Straight
COUPLING SSN
Type: Straight Material: Stainless Steel and Rubber Connection: Clamp MOQ:1 LSSN0110 110mm Straight
COUPLING SSN
Type: Reducing Material: Stainless Steel and Rubber Connection: Clamp MOQ:1 LSSN4050 50mm x 40mm Reducing
Type: Nipple
Material: Mild Steel Connection: Screwed MOQ:10
LZZ1001A 15mm Nipple
Type: Nipple Material: Mild Steel Connection: Screwed MOQ:10
LZZ1002A 22mm Nipple
SABS - Bend Angle: 45° Material: PVC Installation: Weld Consumables: PVC Weld Inspection: Yes Application: Sewage Conveyance Above Ground MOQ:1 9904008 40mm 9905008 50mm
SABS - Bend Angle: 45° Material: PVC Installation: Weld Consumables: PVC Weld Inspection: No Application: Sewage Conveyance Above Ground MOQ:1 9904006 40mm 9905006 50mm
SABS - Bend Angle: 90° Material: PVC Installation: Weld Consumables: PVC Weld Inspection: Yes Application: Sewage Conveyance Above Ground MOQ:1 9904007 40mm 9905007 50mm
SABS - Bend Angle: 90° Material: PVC Installation: Weld Consumables: PVC Weld Inspection: No Application: Sewage Conveyance Above Ground MOQ:1 9904005 40mm 9905005 50mm
SABS - Junction Angle: 45° Material: PVC Installation: Weld Consumables: PVC Weld Inspection: Yes Application: Sewage Conveyance Above Ground MOQ:1 9904024 40mm 9905024 50mm
SABS - Junction Angle: 45° Material: PVC Installation: Weld Consumables: PVC Weld Inspection: No Application: Sewage Conveyance Above Ground MOQ:1 9904023 40mm 9905023 50mm
SABS - Junction Angle: 90° Material: PVC Installation: Weld Consumables: PVC Weld Inspection: Yes Application: Sewage Conveyance Above Ground MOQ:1 9904011 40mm 9905014 50mm
SABS - Junction Angle: 90° Material: PVC Installation: Weld Consumables: PVC Weld Inspection: No Application: Sewage Conveyance Above Ground MOQ:1 9904010 40mm 9905013 50mm
SABS - Socket Angle: Straight Material: PVC Installation: Weld Consumables: PVC Weld Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 9904009 40mm 9905009 50mm
SABS - Stop End Angle: n/a Material: PVC Installation: Weld Consumables: PVC Weld Application: Sewage Conveyance Above Ground MOQ:1 9904015 40mm 9905015 50mm
SABS - Socket Angle: Straight Material: PVC Installation: Weld Consumables: PVC Weld Application: Sewage Conveyance Above Ground MOQ:1 9905010 40mm
SABS - Reducer Angle: Straight Material: PVC Installation: Weld & Rubber Ringed Consumables: Soft Soap & PVC Weld Application: Sewage Conveyance Above Ground MOQ:1 9911008 50mm
Adaptor Angle: Straight Material: PVC Installation: Weld Consumables: PVC Weld Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 9904001 40mm x 1 - 1/4 9905011 50mm x 1 - 1/2
Adaptor Angle: Straight Material: PVC Installation: Weld Consumables: PVC Weld Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 9904012 40mm 9905012 50mm
SABS - Bend Angle: 45° Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: Yes Application: Sewage Conveyance Above Ground MOQ:1 S110BNS164 110mm
SABS- Bend Angle: 45° Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Application: Sewage Conveyance Above Ground MOQ:1 S110BNS159 110mm
SABS - Bend Angle: 90° Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Application: Sewage Conveyance Above Ground MOQ:1 9911007 110mm
SABS - Bend Angle: 90° Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Application: Sewage Conveyance Above Ground MOQ:1 9911006 110mm
SABS - Bend Angle: 90° Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: Yes Application: Sewage Conveyance Above Ground MOQ:1 9911004 110mm
SABS- Junction Angle: 45° Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: Yes Application: Sewage Conveyance Above Ground MOQ:1 S110SJ085 110mm
SABS - Junction Angle: 45° Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: No Application: Sewage Conveyance Above Ground MOQ:1 LM4820 110mm
SABS- Connector Angle: Straight Material: PVC Installation: Weld Consumables: PVC Weld Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 9911003 110mm
SABS- Socket Angle: Straight Material: PVC Installation: Weld & Rubber Ringed Consumables: Soft Soap & PVC Weld Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 9911005 110mm
SABS- Junction Angle: 90° Material: PVC Installation: Rubber ringed Consumables: Soft Soap Inspection: No Application: Sewage Conveyance Above Ground MOQ:1 9911009 110mm
SABS - Junction Reducer Angle: 90° Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: No Application: Sewage Conveyance Above Ground MOQ:1 9911015 110mm & 50mm
SABS - Junction Reducer Angle: 90° Material: Polypropylene Installation: Rubber Ringed Consumables: Soft Soap Inspection: Yes Application: Sewage Conveyance Above Ground MOQ:1 9911016 110mm & 50mm
SABS - Socket Angle: n/a Material: PVC Installation: n/a Consumables: n/a Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 9911033 110mm
SABS - Connector
Angle: 90° Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: Yes Application: Sewage Conveyance Above Ground MOQ:1 9911012 110mm
SABS - Socket Angle: n/a Material: PVC Installation: n/a Consumables: n/a Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 9911033 110mm
SABS - Valve Angle: n/a Material: PVC Installation: Weld Consumables: PVC Weld Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 9911002 110mm
SABS - Junction Angle: 90° Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: Yes Application: Sewage Conveyance Above Ground MOQ:1 9911010 110mm
SABS - Valve Material: PVC Installation: Weld Consumables: PVC Weld Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 9905002 50mm
SABS - Adaptor Angle: 90° Material: PVC Installation: Weld & Rubber Ringed Consumables: Soft Soap & PVC Weld Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 9911011 110mm & 50mm
SABS - Connector Angle: Flexible Material: Plastic Installation: Push Fit Consumables: n/a Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 79998008 32/40mm FI x 40/50mm
SABS - Connector Angle: Flexible Material: Plastic, Silicone Installation: Rubber Ringed Consumables: Soft Soap Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 7123000 110mm L750mm
SABS - Connector Angle: Flexible Material: Plastic, Silicone Installation: Rubber Ringed Consumables: Soft Soap Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 71080201 110mm 165-270mm
SABS - Connector Angle: Flexible Material: Plastic, Silicone Installation: Rubber Ringed Consumables: Soft Soap Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 71080102 110mm 270-420mm
SABS - Connector Angle: Flexible Material: Plastic Installation: Push Fit Consumables: n/a Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 79008008 40mm
SABS - Connector Angle: Flexible Material: Plastic Installation: Push Fit Consumables: n/a Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 79010005 50mm
SABS - Connector Angle: Offset Straight Material: Silicone Installation: Rubber Ringed Consumables: Soft Soap Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 71160000 110mm
SABS - Connector Angle: Straight Material: Plastic, Silicone Installation: Rubber Ringed Consumables: Soft Soap Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1
71150000 110mm
SABS - Connector Angle: Flexible Material: Plastic Installation: Rubber Ringed Consumables: Soft Soap Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 9911003F 110mm
SABS - Rodding Eye Angle: 45° Material: Cast Iron Installation: Push Fit Consumables: Soft Soap Inspection: n/a Application: Sewage Conveyance Above Ground MOQ:1 LZZ5041A 110mm
SABS - Bend Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: No Application:Sewage Conveyance Under Ground MOQ:1
PUB110/22 110mm
SABS - Bend Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: No Application: Sewage Conveyance Under Ground MOQ:1 9811022 110mm
SABS - Bend Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: No Application: Sewage Conveyance Under Ground MOQ:1 9811023 110mm
SABS - Junction Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: Yes Application: Sewage Conveyance Under Ground MOQ:1 9811035 110mm
SABS - Junction Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: No Application: Sewage Conveyance Under Ground MOQ:1 9811026 110mm
SABS - Junction Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: Yes Application: Sewage Conveyance Under Ground MOQ:1 9811027 110mm
SABS - Junction Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: Yes Application: Sewage Conveyance Under Ground MOQ:1 9811028 110mm
SABS - Junction Material: Polypropylene Installation: Rubber Ringed Consumables: Soft Soap Inspection: Yes Application: Sewage Conveyance Under Ground MOQ:1 9811025 110mm
SABS - Socket Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: No Application: Sewage Conveyance Under Ground MOQ:1 9811034 110mm
SABS - Socket Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: No Application: Sewage Conveyance Under Ground MOQ:1 9811033 110mm
SABS - Socket Material: PVC Installation: Rubber Ringed and Weld Consumables: Soft Soap, PVC Weld Inspection: No Application: Sewage Conveyance Under Ground MOQ:1 9811024 110mm
SABS - Gulley Material: PVC Installation: Weld Consumables: PVC Weld Inspection: No Application: Sewage Conveyance Under Ground MOQ:1 9811032 110mm
SABS - Gulley Material: PVC Installation: Weld Consumables: PVC Weld Inspection: n/a Application: Sewage Conveyance Under Ground MOQ:1 9811030 110mm
SABS - Gulley Material: PVC Installation: Lose Fit Consumables: n/a Inspection: n/a Application: Sewage Conveyance Under Ground MOQ:1 9811031 Spare
SABS - Adaptor Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: No Application: Sewage Conveyance Under Ground MOQ:1 9811039 110mm
SABS - Rodding Eye Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Inspection: No Application: Sewage Conveyance Under Ground
MOQ:1 9811029 110mm
SABS - Stop End Material: PVC Installation: Weld Consumables: PVC Weld Inspection: No Application: Sewage Conveyance Under Ground
MOQ:1 9811037 110mm
SABS - Junction Angle: Material: PVC Installation: Rubber Ringed Consumables: Soft Soap Application: Sewage Conveyance Under Ground MOQ:1 99160110J 110mm - 160 x 110mm
Samrand | 111 Sterling Road, Samrand, 0157 Private Bag X165, Centurion 0046 T. +27 12 657 2222 | F. +27 12 657 2123
E. enquiries@agrinet.co.za
Bellville | Emerald Street, Bellville Industrial Park, Bellville South, 7530 PO Box 1300, Sanlamhof T. +27 21 959 5420 | F. +27 21 951 4794
E. belbestel@agrinet.co.za
SABS - Monogold Material: PPR Temperature: -20°C to 85°C
UV Resistant MOQ:1
UNIPIP156 15mm UNIPIP226 22mm
SABS - Monogold Material: PPR Temperature: -20°C to 85°C
UV Resistant MOQ:1
UNIPIP1525 25m UNIPIP1550 50m UNIPIP15100 100m
SABS - Monogold Material: PPR Temperature: -20°C to 85°C
UV Resistant MOQ:1
UNIPIP2225 25m UNIPIP250 50m UNIPIP22100 100m
Polypropylene
Class: Cl10
Application: Water Distribution Temperature: Cold Water Only
Not UV Resistant MOQ:10
LTP0101A 15mm x 6m
LTP0103A 22mm x 6m
Polypropylene
Class: Cl10
Application: Water Distribution Temperature: Cold Water Only
Not UV Resistant
LTP0105A 15mm x 100m
LTP0107A 22mm x 100m
MOQ:1
SABS Approved PVC Type: PVC Waste Under Ground Class: 100 Pressure: Free Flow Not UV Resistant
MOQ:1 9811020 110mm x 6m
SABS Approved PVC PVC Waste Above Ground Class: n/a Pressure: Free Flow UV Resistant
MOQ:1 9904014 40mm x 6m 9905018 50mm x 6m 9911014 110mm x 6m
SABS - Copper Class: 0
Copper pipe Class 0 for general use in plumbing and complies with SA standard. Used with compression and solder accessories.
UV Resistant
LTC0001A 15mm x 5.5m
LTC0010A 22mm x 5.5m
MOQ:1
Private Bag X165, Centurion 0046
T. +27 12 657 2222 | F. +27 12 657 2123
E. enquiries@agrinet.co.za
Bellville | Emerald Street, Bellville Industrial Park, Bellville South, 7530 PO Box 1300, Sanlamhof T. +27 21 959 5420 | F. +27 21 951 4794
E. belbestel@agrinet.co.za
Front Flush 59998002
Classic front flush cistern, economic.
• A stylish cost effective cistern. High gloss modern design.
• Complete with standard Wirquin inlet & Flush Valve
• Plastic handle, Lever arm, 90° Flush pipe with concealing cap nut, and wall
• fixations are also supplied.
• Solid clip on lid.
• Manufactured from Virgin material.
• Conforms to SABS standards.
• 10 year guarantee on mechanism.
WIRQUIN
59998001
Classic front flush cistern, economic.
• A stylish cost effective cistern.
• The most cost effective way of saving water on a new installation.
• High gloss modern design.
• Complete with standard Wirquin inlet & Flush Valve.
• CP Dual Flush Button.
• 90° Flush pipe with concealing cap nut, and wall fixations are also supplied.
• Solid clip on lid.
• Manufactured from Virgin material.
• Conforms to SANS standards.
• 10 year guarantee on mechanism.
MOQ:1
WIRQUINMOQ:1
WIRQUIN M322 washer seal for close coupled connections. MOQ:1 89998119 Spare
JOLLYFIL/TOPY DIAPHRAGM WASHER
WIRQUIN
WIRQUIN CISTERN HANDLE AND LEVER ARM KIT - CP WIRQUIN
Handle and arm for toilet cistern. MOQ:1 LZZ9017A Spare CISTERN STOPPER DUTTON PLASTICS
Replacement diaphragm washer for the Jollyfill/Topy inlet valves. MOQ:1 19066001 Spare
DUTTON PLASTICS
Handle and arm for toilet cistern.
LZZ9017P Spare
MOQ:1
C.T.D
Replacement cone for flush pipe between low level toilet cistern and pan.
MOQ:1
C.T.D
LZZ6001A Spare Black
LZZ6002A Spare White
Replacement bung for flush pipe.
LZZ6003A Spare
MOQ:1
DUTTON PLASTICS
Red shoe and stud for both sides of the brass arms.
MOQ:1
LZZ9015P Spare
DUTTON PLASTICS
Round, orange, plastic balls for use with float valves.
MOQ:1 332-P112 110mm 332-P125 125mm 332-P150 150mm
DUTTON PLASTICS
Orange, float ball for toilet cisterns. MOQ:1 LZZ9016A 80mm
DUTTON PLASTICS
Orange, float ball for toilet cisterns.
LZZ9016P 80mm
MOQ:1
DUTTON PLASTICS
Lipped washer for Beta valve.
LZZ9009A Spare
MOQ:1
DUTTON PLASTICS
Lipped washer for Beta valve. 2 per pack.
LZZ9009P Spare
MOQ:1
CLOSED
WASHER
C.T.D
Replacement washer for Kleenflo valve. MOQ:10
LZZ5001A Spare
Replacement washer for Beta valve.
LZZ5002A Spare
C.T.D
MOQ:10
C.T.D
Replacement washer for Beta valve. MOQ:10
LZZ5003A Spare
C.T.D
Replacement washer for Hi-flo valve. MOQ:10
LZZ5004A Spare
DUTTON PLASTICS
Replacement washer for Beta valve. 2 Pack.
MOQ:1
LZZ9024P Spare
DUTTON PLASTICS
Washer for FP10 outlet. Toilet cistern with bottom inlet. 2 per pack.
LZZ9008P Spare
MOQ:1
DUTTON PLASTICS
2 Packs. Internal washer for inlet valves (FP3, FP2, FP049, FP050, FP288). Toilet cistern with top inlet. MOQ:1
LZZ9006P Spare
DUTTON PLASTICS
Washer for inlet valves (FP3, FP2, FP049, FP050, FP288). Toilet cistern with bottom inlet. 2 per pack
LZZ9007P Spare
MOQ:1
C.T.D
Washer for inlet valves (FP3, FP2, FP049, FP050, FP288). Toilet cistern with bottom inlet.
LZZ9007A Spare
MOQ:1
Pre-Packed Loose Boxed
The flush pipe is used to supply water from a low-level cistern to a low level pan.
MOQ:10
FP23K Spare
The Lever Hook gets installed no a toilet flush valve to connect the flush arm and handle.
G-FP81 Spare
MOQ:10
Ring for replacement on close couple toilet sets.
MOQ:10
LZZ6004A Closed Coupled
FXM
15mm Female BSP thread for galvanized pipe or similar. 3/8 Male end to fit in most deck type mixers.
FXF
Thread for galvanized pipe or similar. Tested up to 80 BAR.
FXF
Flexible connector for connecting taps and toilet cisterns. Connectors are SABS tested and approved.
MOQ:1
LCZ1450A 15mm x 3/8” x 450mm
LCZ1402A 15mm x 350mm
LCZ1405A 15mm x 450mm
MOQ:1
MOQ:1
LCZ0350S 15mm x 350mm
LCZ0450S 15mm x 450mm
FXF
Box packed, Stainless steel, Double locking, Chrome plated 1.5 meter replacement shower hose.
LCZ1500A 15mm x 1.5m
MOQ:1
FXF
Low pressure outlet hose. MOQ:1 LHW0002O 2m
FXF
The 2m washing machine fill hose can supply either hot or cold water to your washing machine from water source. The polyester reinforcement allows high pressure up to 800 psi. MOQ:1
LM6559 3/4” x 2m
Standard basin plug manufactured in plastic.
LZZ4030A White
LZZ4040A Black
C.T.D
MOQ:10
Standard basin plug manufactured in plastic.
LZZ4060A Black
LZZ4050A White
C.T.D
MOQ:10
BASIN
Black plastic basin plugs.
LZZ9020P Black
DUTTON PLASTICS
MOQ:1
Black plastic basin plugs.
LZZ9019P Black
DUTTON PLASTICS
MOQ:1
Replacement pop-up plug. MOQ:1
SP9260S Grey
WIRQUIN
Plug + filter. 2 IN 1 UNIVERSAL PLUG for kitchen and bathroom. To stop water flow and filter with the basket.
30722894 Black
MOQ:1
Plug + filter. 2 IN 1 UNIVERSAL PLUG for kitchen and bathroom. To stop water flow and filter with the basket.
30722334 Pink
MOQ:1
Plug + filter. 2 IN 1 UNIVERSAL PLUG for kitchen and bathroom. To stop water flow and filter with the basket.
30722335 Red
MOQ:1
WIRQUIN
Plug + filter. 2 IN 1 UNIVERSAL PLUG for kitchen and bathroom. To stop water flow and filter with the basket.
30722337 White
MOQ:1
Universal plugs for numerous applications ranging from basins, sink and bath, ideal for camping and non-standard size wastes.
MOQ:1
39224001 Grey
Universal plugs for numerous applications ranging from basins, sink and bath, ideal for camping and non-standard size wastes.
MOQ:1
39224101 Blue
Universal plugs for numerous applications ranging from basins, sink and bath, ideal for camping and non-standard size wastes.
MOQ:1 39224201 Orange
Universal plugs for numerous applications ranging from basins, sink and bath, ideal for camping and non-standard size wastes.
MOQ:1
39224401 White
Replacement fibre washer.
LCZ1202A 16 x 24 x 2mm 3.4"
Replacement fibre washer.
MOQ:1
MOQ:1
LCZ1201A 12.6 x 18.6 x 2mm 1/2”
WIRQUIN
WIRQUIN
Transformed Urea Formaldehyde (T.U.F) Duty: Medium Hinge: Stainless Steel Soft Close: Yes Feature: Anti Bacterial MOQ:1 20900008 Contemporary
WIRQUIN TOILET SEAT NEON PP PL HINGE WHT 900G
WIRQUIN
ABS Plastic Duty: Light Hinge: Nylon Soft Close: No Feature: Anti Bacterial MOQ:1 20910002 Contemporary
WIRQUIN TOILET SEAT NEON LITE PP PL HINGE WHT 600G
WIRQUIN
ABS Plastic Duty: Light Hinge: Nylon Soft Close: No Feature: Anti Bacterial MOQ:1 20910003 Contemporary
WIRQUIN
Transformed Urea Formaldehyde (T.U.F)
Duty: Medium Hinge: Nylon Soft Close: No Feature: Anti Bacterial MOQ:1 20900001 Contemporary
WIRQUIN
Transformed Urea Formaldehyde (T.U.F) Duty: Medium Hinge: Chrome Soft Close: No Feature: Anti Bacterial MOQ:1 20900002 Contemporary
WIRQUIN
Transformed Urea Formaldehyde (T.U.F) Duty: Medium Hinge: Stainless Steel Soft Close: Yes Feature: Anti Bacterial MOQ:1 20900003 Contemporary
WIRQUIN
Transformed Urea Formaldehyde (T.U.F)
Duty: Heavy Hinge: Nylon Soft Close: No Feature: Anti Bacterial MOQ:1
CMESS011WH Contemporary
WIRQUIN
Transformed Urea Formaldehyde (T.U.F)
Duty: Heavy Hinge: Stainless Steel Soft Close: No Feature: Anti Bacterial MOQ:1
CMESSO15WH Contemporary
WIRQUIN
ABS Plastic Duty: Medium Hinge: Nylon Soft Close: No Feature: Anti Bacterial MOQ:1 29998006 Contemporary
Moulded Wooden Duty: Medium Hinge: Nylon Soft Close: No Feature: n/a MOQ:1
SHS110 Contemporary
WIRQUIN
Transformed Urea Formaldehyde (T.U.F)
Duty: Medium Hinge: Stainless Steel Soft Close: Yes Feature: Anti Bacterial MOQ:1
20980001 Contemporary
WIRQUIN
Transformed Urea Formaldehyde (T.U.F)
Duty: Medium Hinge: Stainless Steel Soft Close: No Feature: Anti Bacterial MOQ:1 20931005 Contemporary
Transformed Urea Formaldehyde (T.U.F) Duty: Medium Hinge: Stainless Steel Soft Close: Yes Feature: Anti Bacterial
MOQ:1 20900500 Contemporary
ABS Plastic Duty: n/a Hinge: n/a Soft Close: n/a Feature: Pit Type
MOQ:1 9625510 Contemporary
TOILET
DUTTON PLASTICS
DUTTON PLASTICS
Spare Hinge: Nylon Soft Close: n/a
MOQ:1 LZZ9018A
Spare Hinge: Nylon Soft Close: n/a
MOQ:1 LZZ9018P
ABS Plastic Duty: n/a Hinge: n/a Soft Close: n/a Feature: Pit Type
MOQ:1 SO09625512 Contemporary
40MM
Waste, DZR Brass, Chrome Plated
BELATORI
Application: Bath/Sink Shape: Plugged Depth: Unslotted MOQ:1
LZZ2020A 40mm
WASTE
32MM
BELATORI
Waste, DZR Brass, Chrome Plated Application: Basin Shape: Plugged Depth: Slotted MOQ:1
LZZ2040A 32mm
WASTE BASIN BRASS UNSLOTTED CP 32MM
BELATORI
Waste, DZR Brass, Chrome Plated Application: Basin Shape: Plugged Depth: Un-Slotted MOQ:1 LZZ2045A 32mm
40MM
Waste, DZR Brass, Chrome Plated
BELATORI
Application: Bath/Sink Shape: Pop-up Depth: Unslotted MOQ:1
LZZ2020P 40mm
WASTE
CP 32MM
BELATORI
Waste, DZR Brass, Chrome Plated Application: Basin Shape: Pop-up Depth: Slotted MOQ:1
LZZ2040P 32mm
WASTE BASIN UNSLOTTED POP-UP CP 32MM
BELATORI
Waste, DZR Brass, Chrome Plated Application: Basin Shape: Pop-up Depth: Un-Slotted MOQ:1
LZZ2045P 32mm
C.T.D
Waste, Plastic, White/Stainless Steel/Black Application: Basin Shape: Plugged Depth: Slotted MOQ:1
LZZ2050A 32mm
C.T.D
Waste, Plastic, White/Stainless Steel/Black Application: Bath/Sink Shape: Plugged Depth: Unslotted MOQ:1 LZZ2030A 40mm
C.T.D
Waste, Plastic, Stainless Steel Plug Application: Sink Shape: Basket Depth: Spare MOQ:1 LZS0109A 90mm
DUTTON PLASTICS
Waste Material: Plastic Finish/Colour: White - Chrome Grid Application: Shower Tray/Urinal Shape: Unslotted - Grid Depth: Spare MOQ:1
LZZ2010A 40mm
C.T.D
Trap Material: Rubber Finish/Colour: Black Application: Basin Shape: P Depth: Plain MOQ:1 9623232 32x32mm
TRAP RUBBER PLAIN S 32X32MM (40MM PVC OUT)
C.T.D
Trap Material: Rubber Finish/Colour: Black Application: Basin Shape: S Depth: Plain MOQ:1 9633232 32x32mm
TRAP RUBBER S 32X38MM (50MM PVC OUT)
C.T.D
Trap Material: Rubber Finish/Colour: Black Application: Basin Shape: S Depth: Re-seal MOQ:1 9733238 32x40mm
C.T.D
Trap Material: Rubber Finish/Colour: Black Application: Basin Shape: P Depth: Re-seal MOQ:1 9723238 32x40mm
TRAP RUBBER PLAIN P 38X32MM (40MM PVC OUT)
C.T.D
Trap Material: Rubber Finish/Colour: Black Application: Urinal/Sink Shape: P Depth: Plain MOQ:1 9623832 38x32mm
TRAP RUBBER PLAIN S 38X32MM (40MM PVC OUT)
C.T.D
Trap Material: Rubber Finish/Colour: Black Application: Urinal/Sink Shape: S Depth: Plain MOQ:1 9633832 38x32mm
TRAP RUBBER BATH & OVERFLOW (50MM PVC OUT)
C.T.D
Trap Material: Rubber Finish/Colour: Black Application: Bath Shape: Bath Combo Depth: Re-seal MOQ:1 9743838 40mm
TRAP RUBBER S 38X38MM (50MM PVC OUT)
C.T.D
Trap Material: Rubber Finish/Colour: Black Application: Urinal/Sink Shape: S Depth: Re-seal MOQ:1 9733838 40mm
C.T.D
Trap Material: Rubber Finish/Colour: Black Application: Urinal/Sink Shape: P Depth: Re-seal MOQ:1 9723838 40mm
C.T.D
Trap Material: Rubber Finish/Colour: Black Application: Urinal/Sink Shape: P-Mini Depth: Mini Re-seal MOQ:1 9713838 40mm
Trap Material: Plastic Finish/Colour: White Application: Basin Shape: P Depth: Plain MOQ:1
LTP3240P 32x40mm
DUTTON PLASTICS
Trap Material: Plastic Finish/Colour: White Application: Basin Shape: S Depth: Plain MOQ:1
LTP3240S 32x40mm
TRAP
C.T.D
Trap Material: Rubber Finish/Colour: Black Application: Double Bowl Sink Shape: Sink Combo Depth: 300mm MOQ:1 9738300 40x300mm 9738600 40x600mm
DUTTON PLASTICS
Trap Material: Plastic Finish/Colour: White Application: Urinal/Sink Shape: P Depth: Plain MOQ:1
LTP3840P 38x40mm
Trap Material: Plastic Finish/Colour: White Application: Urinal/Sink Shape: S Depth: Plain MOQ:1
LTP3840S 38x40mm
DUTTON PLASTICS
Trap Material: Plastic Finish/Colour: White Application: Washing Machine Shape: S Depth: Plain MOQ:1
LTW5050D 50mm
TRAP WHITE S 32X32MM (40MM PVC OUT)
C.T.D
Trap Material: Rubber Finish/Colour: White Application: Basin Shape: S Depth: Plain MOQ:1
LTW3232S 32x32mm
C.T.D
Trap Material: Rubber Finish/Colour: White Application: Basin Shape: P-Mini Depth: Plain MOQ:1
LTW3240M 32x40mm
TRAP
C.T.D
Trap Material: Rubber Finish/Colour: White Application: Basin Shape: P Depth: Plain MOQ:1 LTW3232P 32x32mm
TRAP
C.T.D
Trap Material: Rubber Finish/Colour: White Application: Basin Shape: P Depth: Plain MOQ:1
LTW3240P 32x40mm
TRAP WHITE S 32X40MM (50MM PVC OUT)
C.T.D
Trap Material: Rubber Finish/Colour: White Application: Basin Shape: S Depth: Plain MOQ:1 LTW3240S 32x40mm
TRAP WHITE BATH & OVERFLOW (50MM PVC OUT)
C.T.D
Trap Material: Rubber Finish/Colour: White Application: Bath Shape: Bath Combo Depth: Plain MOQ:1 LTW4040B 40mm
TRAP WHITE COMBO 300MM
C.T.D
Trap Material: Rubber Finish/Colour: White Application: Double Bowl Sink Shape: Sink Combo Depth: 300mm MOQ:1 LTW0300C 40mm
TRAP WHITE MINI P 40X40MM (50MM PVC OUT)
C.T.D
Trap Material: Rubber Finish/Colour: White Application: Urinal/Sink Shape: P-Mini Depth: Plain MOQ:1
LTW4040M 40x40mm
TRAP WHITE P 40X40MM (50MM PVC OUT)
C.T.D
Trap Material: Rubber Finish/Colour: White Application: Urinal/Sink Shape: P Depth: Plain MOQ:1
LTW4040P 40x40mm
TRAP WHITE S 40X40MM (50MM PVC OUT)
C.T.D
Trap Material: Rubber Finish/Colour: White Application: Urinal/Sink Shape: S Depth: Plain MOQ:1
LTW4040S 40x40mm
C.T.D
C.T.D
BELATORI
Trap Material: Plastic Finish/Colour: White/Grey/CP Application: Shower Shape: Round Depth: Medium Seal
LZZ3020A 50mm
MOQ:1
Trap Material: Plastic Finish/Colour: White/Grey/CP Application: Shower Shape: Round Depth: Shallow Seal MOQ:1 LZZ3010A 50mm
Trap Material: Brass Finish/Colour: Chrome Plated Application: Basin/Urinal/Sink Shape: Bottle MOQ:1
LBT001UNI 32/40mm
WIRQUIN TRAP BOTTLE CLASSIC
BRASS CP 32X40
Trap Material: DZR Brass
Finish/Colour: Chrome Application: Basin Shape: Bottle Depth: n/a
39998027 32x40mm
WIRQUIN
WIRQUIN TRAP BOTTLE ALL IN ONE INIVERSAL WHT
WIRQUIN
WIRQUIN
Trap Material: Plastic Finish/Colour: White Application: Basin/Urinal/Sink Shape: Bottle Depth: n/a
Trap Material: Plastic Finish/Colour: Silver Application: Basin/Urinal/Sink Shape: Bottle Depth: n/a
MOQ:1
MOQ:1
39998005 Universal
39998051 Universal
MOQ:1
Trap Material: Plastic Finish/Colour: White Application: Basin/Urinal/Sink Shape: Bottle Depth: Universal MOQ:1 30931010 50mm
Trap Material: Plastic Finish/Colour: White Application: Basin/Urinal/Sink Shape: Bottle Depth: Universal MOQ:1 30931021 80mm 30931020 50mm
WIRQUIN
Trap Material: Plastic Finish/Colour: White Application: Basin/Urinal/Sink Depth: Waterless MOQ:1 79998005 32/40 x 40
WIRQUIN
Trap Material: Plastic Finish/Colour: White/Stainless Steel Application: Bath Shape: Bath Combo Depth: Plain MOQ:1 39998011 40mm
WIRQUIN
Trap Material: Plastic Finish/Colour: White/Chrome Application: Bath Shape: Bath Combo Depth: Plain MOQ:1 39998001 40mm
WIRQUIN
Trap Material: Plastic Finish/Colour: White Application: Bath Shape: Bath Combo MOQ:1 39998010 40mm
WIRQUIN
Trap Material: Plastic Finish/Colour: White Application: Double Bowl Sink Shape: Combo Depth: With washing machine connection MOQ:1 39998033 40mm
WIRQUIN
Trap Material: Plastic Finish/Colour: Chrome Plated Application: Shower Shape: Shower Depth: Plain MOQ:1 LWT0001S 60mm
WIRQUIN
Trap Material: Plastic Finish/Colour: Stainless Steel Application: Shower Shape: Shower MOQ:1 30933016 90mm
WIRQUIN
WIRQUIN
Trap Material: Plastic Finish/Colour: Stainless Steel Application: Shower Shape: Square Depth: n/a MOQ:1 34040401 40mm
Trap Material: Plastic
Finish/Colour: Stainless Steel Application: Shower Shape: Channel
WIRQUIN
Trap Material: Plastic Finish/Colour: Stainless Steel Application: Shower Shape: Channel
WIRQUIN
MOQ:1 30719785 700mm
MOQ:1 30718194 800mm
WIRQUIN
Trap Material: Plastic
Finish/Colour: Stainless Steel Application: Shower Shape: Channel MOQ:1 30721026 300mm
Trap Material: Plastic
Finish/Colour: Stainless Steel Application: Shower Shape: Channel
WIRQUIN
MOQ:1 30924007 900mm
WIRQUIN
WIRQUIN
Trap Material: Plastic Finish/Colour: Stainless Steel Application: Shower Shape: Channel MOQ:1 30721029 500mm
WIRQUIN
Trap Material: Plastic Finish/Colour: Stainless Steel Application: Shower Shape: Square MOQ:1 30924000 60mm
Trap Material: Plastic Finish/Colour: Stainless Steel Application: Shower Shape: Channel
WIRQUIN
WIRQUIN
MOQ:1 30717816 700mm
Trap Material: Plastic Finish/Colour: Stainless Steel Application: Shower Shape: Round MOQ:1 30903000 90mm
Trap Material: Plastic Finish/Colour: White Application: Single Bowl Sink Shape: Combo Depth: With washing machine connection MOQ:1
Trap
Finish/Colour: Stainless Steel Application: Shower Shape: Square Depth: Shallow Seal
MOQ:1 75mm
WIRQUIN
Cover Finish/Colour: White Application: Bath Shape: Square MOQ:1 99998005 344mm x 344mm
WIRQUIN
Spare Material: Plastic Finish/Colour: White Shape: Extension
MOQ:1 SP9307 60-220mm
Spare Material: Plastic Finish/Colour: Chrome Plated Application: Shower Shape: Round
LZZ3030A 50mm
C.T.D
MOQ:1
Spare Material: Stainless Steel Finish/Colour: Stainless Steel Application: Shower Shape: Round MOQ:1
LZZ3035A 50mm
Type: General Purpose Lubricant
LLB0200A 200ml
GLUE DEVIL
MOQ:1
Type: High Pressure
LGH0100A 100ml LGH0200A 250ml LGH0500A 500ml
GLUE DEVIL
MOQ:1
Type: Low Pressure
LGL0100A 100ml LGL0200A 200ml LGL0500A 500ml
GLUE DEVIL
MOQ:1
Type: Low Pressure
Chemical Resistance:
GLUEDEVIL PVC CEMENT is a high quality, fast setting solvent-based cementing adhesive formulated to provide a strong joint and seal when joining rigid PVC pipes and fittings.
MOQ:1
LGL050A 50ml
Type: PVC Pipe Lubricant
LLS0500A 500g LLS1000A 1kg LLS2000A 2kg LLS5000A 5kg
GLUE DEVIL
MOQ:1
Sealing Threaded Connections
Type: PTFE Material: PTFE Tape Colour: White Chemical Resistance: Water, Air
HW2760045 10mm x 7m
HW2760043 12mm x 0.075mm x 10m
HW2760044 19mm x 0.075mm x 10m
HW2760046 19mm x 0.075mm x 50m
HW2760047 19mm x 0.1mm x 50m
MOQ:1
Type: Hemp Material: Fibre Colour: Brown Chemical Resistance: Water MOQ:1 LAH0001A 200g hank
Use with Hemp
Type: Jointing Compound Material: Liquid Before Harding Colour: Red Chemical Resistance: Oil, Petrol, Steam, Water MOQ:1 LAH0002A 500g
Seal Pan Connector
Type: Pan Seal Wax Ring Material: Soft Wax Chemical Resistance: Water MOQ:1
LAA0101A White LAA0102A Brown
CADAC
Steel, Plastic, Brass Material: Steel, Plastic, Brass Operation: Piezo Ignition Refill: V0403055 Flame: Adjustable MOQ:1
LSZ2103A Head Only
Steel, Plastic, Brass Material: Steel, Plastic, Brass Operation: Piezo Ignition Refill: V0403052 Flame: Adjustable MOQ:1 LSZ2101A 190g
STANLEY
Operation: 220V MOQ:1
HW1291050 30W HW1291060 45W
Not for plumbing applications. Acid Core Solder can be used on bright mild steel, heavily tarnished copper and brass, nickel and zinc.
Grade: 30S MOQ:1 HW2230097 250g HW2230232 500g
For plumbing applications. 97% Tin, 3% Copper. Lead Free solder. Used for soldering of copper pipes and fittings in plumbing applications. Flux to be used: LSF0100A or LSF0200A
Grade: 97/3
HW2230050 250g HW2230060 500g
SOLDER ACID CORE 30S 2.5MM
Not for plumbing applications. Hollow with resin core for use on electronic equipment. 40% Tin content.
MOQ:1
Grade: 40T2 MOQ:1 HW2230372 250g HW2230526 500g
Solid Lead
Material: Solid Lead Grade: 30T S9
HW2230666 250g HW2230801 500g
MOQ:1
SABS
NASCO
This soldering paste is used with 97/3 solder.
MOQ:1
LSZ1101A 75g
NASCO
SABS
This soldering paste is used with 97/3 solder.
MOQ:1 HW2220120 200g
SABS
Used with soldering bar.
HW2220113 200g HW2220091 50g
NASCO
MOQ:1
PIC-A-NIN
Preparation of soldering surfaces. Removes dirt and grime.
MOQ:1
HW2220040 200ml HW2220075 500ml
SABS
SUPERFLO
Flux is a compound used in plumbing applications when two joints are connected using 97/3 solder. Solder codes HW2230050 and HW2230060.
MOQ:1
LSF0100A 100g LSF0200A 200g
Private Bag X165, Centurion 0046
T. +27 12 657 2222 | F. +27 12 657 2123
E. enquiries@agrinet.co.za
Bellville | Emerald Street, Bellville Industrial Park, Bellville South, 7530 PO Box 1300, Sanlamhof T. +27 21 959 5420 | F. +27 21 951 4794
E. belbestel@agrinet.co.za
DUTTON PLASTICS
Screws to fit toilet cistern to toilet pan. MOQ:1
LZZ9013P Universal
WIRQUIN
Screws to fit toilet cistern to toilet pan. MOQ:1 10934004 Universal
WIRQUIN
Screws to fit toilet or bidet pan to the floor. MOQ:1 10934005 Universal
Complete plug and bolt set to mount basin.
MOQ:1
LZT0309A M10 - 10mm Fixation Bolt
UNITWIST
MARLEY
Holderbat used to mount pipe against a wall. SABS Approved.
MOQ:1 9904013 40mm 9905017 50mm
MARLEY
Holderbat used to attach piping to walls.
MOQ:1 9904020 40mm 9905020 50mm 9911020 110mm
Mostly used as hanger brackets to attach piping to ceilings.
CLAMRUB11/2 1.5” CLAMRUB2 2” CLAMRUB4 4”
MOQ:10
Saddle to anchor copper pipe in wall. Enhances appearance of construction.
LTZ0201A 15mm
LTZ0202A 22mm
MOQ:10
Samrand | 111 Sterling Road, Samrand, 0157
Private Bag X165, Centurion 0046
T. +27 12 657 2222 | F. +27 12 657 2123
E. enquiries@agrinet.co.za
Bellville | Emerald Street, Bellville Industrial Park, Bellville South, 7530 PO Box 1300, Sanlamhof T. +27 21 959 5420 | F. +27 21 951 4794
E. belbestel@agrinet.co.za
Light Duty
Used to join 1 meter channels: LCW300B.
LCW297B Spare
MOQ:1
Light Duty
Used in drainage of rainwater. High quality design. A range of colours available. Light duty product.
MOQ:1
LCW300B 1m x 3PCS
Light Duty
Used to install as a 135° bend in the channels: LCW300B.
LCW316B 135 DEG BEND
MOQ:1
Light Duty
Used to install as a 90° bend in the channels: LCW300B.
MOQ:1
LCW313B 90 DEG BEND
Light Duty
Used to close drain holes, manufactured from quality cast iron. Light duty product.
LZZ5010A 265 x 265mm
LZZ5020A 450 x 450mm
MOQ:1
Light Duty
Used to close drain holes, manufactured from quality cast iron. Light duty product.
LZZ5030A 450 x 600mm
MOQ:1
Light Duty
Cast Iron grate and frame for a light duty application.
LZZ5043A 300 x 300mm
LZZ5045A 600 x 600mm
LZZ5044A 450 x 450mm
MOQ:1
SABS - Rodding Eye
Angle: 45° Material: Cast Iron Application: Sewage Conveyance Above Ground Installation: Push fit Consumables: Soft Soap MOQ:1
LZZ5041A 110mm
IAN DICKIE
Designed for removal of soft items such as rags and paper.
21LDCS089 89mm x 6mm Light Duty
IAN DICKIE
Corkscrews used with drain rods to remove obstructions like rags from sewage pipes.
MOQ:1
1 meter sewer snake.
IAN DICKIE
MOQ:1
21HDCS089 89mm x 8mm Heavy Duty
21HSCS038 34mm x 8mm Heavy Duty
21HSCS064 64mm x 8mm Heavy Duty
21HSCS089 89mm x 8mm Heavy Duty
MOQ:1
21HSS1000 8mm x 1m Heavy Duty
Generally used for cut and removing tree roots in drain systems. Works with a 8mm drain rod.
21LRA064 64mm x 6mm Light Duty
The Flexiback Root Auger is designed to be used when you need to clear roots but you also need flexibility to navigate tight bends. The tool is attached to the end.
IAN DICKIE
Designed to remain flat when pushed in and open when pulled back. Used for the removal of sand and silt.
MOQ:1
MOQ:1
21HRA089 89mm x 8mm Heavy Duty
MOQ:1
21HRA038 38mm x 8mm Heavy Duty
21HRA064 64mm x 8mm Heavy Duty
21LDS089 89mm x 6mm Light Duty
21HDS089 89mm x 8mm Heavy Duty
IAN DICKIE
Used for final cleaning of pipes after the blockage has been removed and brushing has been completed.
MOQ:1
21HRP100 100mm x 8mm Heavy Duty
21LRP100 100mm x 6mm Light Duty
IAN DICKIE
Drain Rod set for DIY use in neat reusable container.
MOQ:1
21HFC1-SET 1m x 8mm Heavy Duty
IAN DICKIE
This special spanner prevents damage to the couplings when joining a string of rods. Normally used in pairs.
MOQ:1
21HAT 6mm & 8mm
IAN DICKIE
Drain Rod set for DIY use in neat reusable container.
21LFC1-SET 2m x 6mm Light Duty
MOQ:1
IAN DICKIE
The Spearhead is designed to be used when the pipeline is blocked with something hard and brittle, such as glass, or for spearing cans.
MOQ:1
21HS 8mm Heavy Duty
IAN DICKIE
Pick-up tool is use to grab trash & drain augers, snake & cable aids, retractable claw retriever sticks.
MOQ:1
21HPUT 8 mm Heavy Duty
This is the best tool available for lines with heavy concentration of sand. The Sand Corkscrew has a smooth configuration and small diameter making it a very useful in retrieving rags and opening small pipe blockages. Used primarily with hand operated equipment.
MOQ:1
21HSC 8 mm Heavy Duty
IAN DICKIE
For easy turning of drain rods. Fitted with lockfast joint, to ensure the rods cannot come undone, whichever way the rods are turned.
IAN DICKIE
Ian Dickie Sewer Rods are ideal for clearing blockages in drains and pipes and are manufactured from high tensile spring steel to Din 17223. Units come complete with male and female couplings, are easy to use and made to last.
MOQ:1
21HRH 8mm
21LRH 6mm
MOQ:1
A force cup is generally used to clean blockages in drains and pipes.
MOQ:1
LFC100W 100 mm
A force cup is generally used to clean blockages in drains and pipes.
MOQ:1
LFC150W 150 mm
WIRQUIN
Flexible spring to unclog traps and small diameter pipes.
SP9910 Universal Light Duty
MOQ:1
Samrand | 111 Sterling Road, Samrand, 0157 Private Bag X165, Centurion 0046 T. +27 12 657 2222 | F. +27 12 657 2123
E. enquiries@agrinet.co.za
Bellville | Emerald Street, Bellville Industrial Park, Bellville South, 7530 PO Box 1300, Sanlamhof T. +27 21 959 5420 | F. +27 21 951 4794
E. belbestel@agrinet.co.za
SABS - Closed Couple
Outlet Size: 2 inch Filler Size: 15mm Material: Plastic Pressure Range: 0-16BAR MOQ:1
14010801 Dual Flush
SABS - Low Level Outlet Size: 2 inch Filler Size: 15mm Material: Plastic Pressure Range: 0-16BAR MOQ:1
10000003 Front Flush
FLUSH MECH 2 SI
SABS - Low Level
Outlet Size: 2 inch Filler Size: 15mm Material: Plastic Pressure Range: 0-16BAR MOQ:1 19998041 Front Flush
SABS - Closed Couple
Outlet Size: 2 inch
Filler Size: 15mm Material: Plastic Pressure Range: 0-16BAR MOQ:1
19998052 Front Flush
SABS - Closed Couple
Outlet Size: 2 inch Filler Size: No Filler Material: Plastic Pressure Range: No Filler MOQ:1
14010601 Dual Flush
DUTTON
SABS - Closed Couple Outlet Size: 2 inch Filler Size: 15mm Material: Plastic Pressure Range: 0-16BAR MOQ:1
LZZ9010A Front Flush
SABS - Closed Couple
Outlet Size: 2 inch Filler Size: 15mm Material: Plastic Pressure Range: 0-16BAR
LZZ1013A Top Flush
DUTTON PLASTICS
Inlet valve for toilet cistern with bottom inlet.
MOQ:1
MOQ:1
LZZ9022A 15mm Inlet
DUTTON PLASTICS
Bend inlet valve for toilet cistern.
LZZ9021P 15mm Inlet
MOQ:1
DUTTON PLASTICS
Straight inlet for toilet cistern.
LZZ9005P 15mm Inlet
DUTTON PLASTICS
Replacement valve with a straight bottom inlet without a float. Fits most old 11 and 13.5L cisterns.
LZZ9005A 15mm Inlet
MOQ:1
MOQ:1
DUTTON PLASTICS
Replacement float without float. BSP 1/2 threaded.
LZZ9001A 15mm Inlet
MOQ:1
Pre-Packed Loose Boxed Blister pack Water Saving
DUTTON PLASTICS
Inlet valve for toilet cistern with side inlet.
MOQ:1 LZZ9001P Spare
DUTTON PLASTICS
Replacement valve for most standard cisterns.
LZZ9003A
Semi Coulse Couple flush pipe connector rubber mostly use on a VAAL Daisy SCC suite.
LZZ6005A Spare
MOQ:1
MOQ:1
DUTTON PLASTICS
Replacement float for high, low and closed couple cisterns.
LZZ9002A Spare
MOQ:1
WIRQUIN
Bung for Bottle Trap Extension pipe 32 x 40
MOQ:1
79294001 32 x 40
WIRQUIN
Universal bottom inlet valve that can handle pressures from 0.1 - 16 bar with a 1/2" connection.
MOQ:1
16100006 1/2”
WIRQUIN
Universal telescopic (adjustable) bottom inlet valve that can handle pressures from 0.1 - 16 bar.
MOQ:1 16110101 1/2”
WIRQUIN
Universal telescopic (adjustable) bottom inlet valve that can handle pressures from 0.1 - 16 bar with a 3/8" connection.
MOQ:1 1610011 3/8”
WIRQUIN
Universal side inlet valve that can handle pressures from 0.1 - 16 bar with a 1/2" connection.
MOQ:1 16300101 1/2”
Universal side inlet valve that can handle pressures from 0.1 - 16 bar with a 1/2" connection.
16300601 1/2”
MOQ:1
WIRQUIN
DOBLO inlet valve fits all water supplies: bottom or side entry, thanks to its removable inlet.
MOQ:1 10922000 1/2”
Private Bag X165, Centurion 0046
T. +27 12 657 2222 | F. +27 12 657 2123
E. enquiries@agrinet.co.za
Bellville | Emerald Street, Bellville Industrial Park, Bellville South, 7530 PO Box 1300, Sanlamhof T. +27 21 959 5420 | F. +27 21 951 4794
E. belbestel@agrinet.co.za
HALF
SABS - uPVC with Titanium Dioxide Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
PVC GUTTER HALF-ROUND BRACKET
SB12W
PVC GUTTER HALF-ROUND CORNER
SABS - uPVC with Titanium Dioxide
Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
UA12W
MOQ:1
PVC GUTTER HALF-ROUND CONNECTOR
SABS - uPVC with Titanium Dioxide Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
GC12W
MOQ:1
PVC GUTTER HALF-ROUND OUTLET ROUND
CO12W
MOQ:1
PVC GUTTER HALF-ROUND STOPEND
MOQ:1
SABS - uPVC with Titanium Dioxide Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
SE12W
MOQ:1
SABS - uPVC with Titanium Dioxide
Attachment: Solvent Weld Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
GPE4.01 4m GPE6.01B 6m
SABS - uPVC with Titanium Dioxide Attachment: Solvent Weld Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
SOUTHPRO
SABS - uPVC with Titanium Dioxide Attachment: Solvent Weld Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
MOQ:1
MOQ:1
GPEBRA.095B
GPECON.115B
SABS - uPVC with Titanium Dioxide
Attachment: Solvent Weld Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
GA20D
MOQ:1
MOQ:1
SABS - uPVC with Titanium Dioxide
Attachment: Solvent Weld Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
GPEOUT.100
MOQ:1
SOUTHPRO
SABS - uPVC with Titanium Dioxide
Attachment: Solvent Weld
Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
GPESE.110B
MOQ:1
SABS - uPVC with Titanium Dioxide Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
PPE3.01 3m
MOQ:1
SOUTHPRO
SABS - uPVC with Titanium Dioxide Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
PB45W 45 Degrees
SOUTHPRO
SABS - uPVC with Titanium Dioxide Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
MOQ:1
MOQ:1
PB90W 90 Degrees
SABS - uPVC With Titanium Dioxide Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
PC80W
MOQ:1
SABS - uPVC with Titanium Dioxide Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
PPECON.140
MOQ:1
SOUTHPRO
SABS - uPVC With Titanium Dioxide Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
PPEHB130
MOQ:1
SABS - uPVC with Titanium Dioxide Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
PPESHO.155B
MOQ:1
SOUTHPRO
SABS - uPVC with Titanium Dioxide Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
PPEB.145B
MOQ:1
SABS - uPVC with Titanium Dioxide
Attachment: Solvent Weld Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
MOQ:1 601010 4m 601012 6m
SABS - uPVC with Titanium Dioxide Attachment: Stainless Steel Screws Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
MOQ:1 601050 4m 601052 6m
SABS - uPVC with Titanium Dioxide Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
MOQ:1 609002
SABS - uPVC with Titanium Dioxide
Attachment: Snap-Fit Durability: No Rust Weight: Light Weight CAD-Designed High Precision UV Resistant
MOQ:1 609001
Stainless Steel
Durability: No Rust MOQ:1 609004 25/BAG
Attachment: Solvent Weld Weight: Light Weight
UV Resistant
MOQ:1 LRH005A DIY
Durability: No Rust Weight: Light Weight
UV Resistant
MOQ:1 LRH002A
SOUTHPRO
SABS - uPVC with Titanium Dioxide
Attachment: Solvent Weld
Durability: No Rust Weight: Light Weight
UV Resistant MOQ:1 LRH001A 90 Degrees
Multi-jet Meter
INFERENTIAL METER LXSG 15mm Brass Dry Dial Cold & Hot Water Meter. Material: Brass MOQ:1
LWM15B 15mm LWM22B 22mm
Piston Type
15mm Plastic Piston Type Water Meter. NRCS approved (SA1508) Class C. Material: Plastic MOQ:1
LWM15P 15mm LWM22P 22mm
Box Only
For ground level installation of domestic water meters. Material: Plastic MOQ:1
LWMBOX15 15mm LWMBOX22 20mm
Spare
Spare set of Brass tail pieces for 15mm water meter. Material: Brass MOQ:1
LWMTP15 15mm LWMTP22 22mm
Spare
Spare set of Plastic tail piece for 15mm water meter. Material: Plastic MOQ:1
LWMTP15PL 15mm LWMTP22PL 22mm
Private Bag X165, Centurion 0046
T. +27 12 657 2222 | F. +27 12 657 2123
E. enquiries@agrinet.co.za
Bellville | Emerald Street, Bellville Industrial Park, Bellville South, 7530 PO Box 1300, Sanlamhof T. +27 21 959 5420 | F. +27 21 951 4794
E. belbestel@agrinet.co.za
STOCK CODE STOCK CODE DESCRIPTION
LTE001M
QTY
TEMPO BASIN MIXER 8
LTE003M TEMPO BATH MIXER 2
LTE004M TEMPO SINK MIXER D/T 4
LTE005M TEMPO SINK MIXER W/T 4
LTE006M TEMPO U/T MIXER 8
LTE007M TEMPO U/T DIV MIXER 4
LVI001S VISTO BASIN MIXER CAST SPOUT 3
LVI002S VISTO BASIN MIXER SWIVEL SPOUT 3
LVI003S VISTO BATH MIXER 3
LVI004S VISTO SINK MIXER D/T 5
LVI005S VISTO SINK MIXER W/T 5
LVI006S VISTO U/T 15MM MXM 10
LVI008S VISTO PILLAR 15MM 10
LVI009S VISTO BIB TAP 15MM W/H 6
LVI010S VISTO BIB TAP 15MM SHORT 6
LVI011S VISTO BIB TAP 15MM LONG 6
STOCK CODE STOCK CODE DESCRIPTION
QTY
LZZ2040A PULSE WASTE BASIN BRASS SLOTTED CP 32MM 8
LZZ2045A PULSE WASTE BASIN BRASS UNSLOTTED CP 32MM 8
LZZ2020A PULSE WASTE BATH-SINK BRASS CP 40MM 8
LZZ2040P PULSE WASTE BASIN SLOTTED POP-UP CP 32MM 8
LZZ2045P PULSE WASTE BASIN UNSLOTTED POP-UP CP 32MM 8
LZZ2020P PULSE WASTE BATH-SINK POP-UP CP 40MM 8
LNS001R PULSE BATH SPOUT NICCI ROUND 3
LNS002R PULSE BATH SPOUT NICCI SQUARE 3
LBT001UNI PULSE BOTTLE TRAP UNIVERSAL 3
LSH2001RD PULSE SHOWER ROSE 230MM ROUND 4
LSH2001SQ PULSE SHOWER ROSE 200MM SQUARE 4
LSH1001RD PULSE SHOWER ROSE 100MM SINGLE FUNCTION 4
LSH0001R PULSE SHOWER ROSE 75MM PRESTEX 8
LSA2001A PULSE SHOWER ARM & FLANGE SHORT 10
LSA400RD PULSE SHOWER ARM & FLANGE LONG 400MM 6
LSR0001S PULSE SHOWER RAIL SET 2
LHS1001RD PULSE HAND SHOWER SINGLE FUNCTION 100MM 4
LCZ1500A PULSE HAND SHOWER HOSE 1.5M 6
LTC0032F
TAP SPARE CARTRIDGE 32MM FLAT 3
LTC0032H TAP SPARE CARTRIDGE 32MM HIGH 3
LTC0040F TAP SPARE CARTRIDGE 40MM FLAT 3
LTC0040H TAP SPARE CARTRIDGE 40MM HIGH 3
LWM0032P WASTE POP-UP MECHANISM UNIVERSAL 4
LWW0032P WASHER BASIN POP-UP SEAL 32MM (3 PER PACK) 6
LWW0040P WASHER BATH POP-UP SEAL 40MM (3 PER PACK) 6
LCD0902A
LCD0701A
LCD0503A
VALVE ANGLE 1/2X1/2 20
VALVE BRASS MINI LEVER MXF 15MM 20
VALVE BRASS ISOL LEVER CXC 15X15MM 20
LCD0101A VALVE BRASS ISOL SCREWDRIVER CXC 15X15MM 20
LCZ0350S HOSE BRAIDED FLEXIBLE FXF 15X350MM SABS 20
LCZ0450S HOSE BRAIDED FLEXIBLE FXF 15X450MM SABS 20
LCZ1450A HOSE BRAIDED FLEXIBLE FXM 15X3/8INCHX450MM SABS 10
STOCK CODE STOCK CODE DESCRIPTION
QTY
ELG-54 GEYSER ELEMENT BOSS GASKET ELG-54 4
ELI-146-KWI GEYSER ELEMENT SPIRAL H/W 2KW 1
ELI-148-KWI GEYSER ELEMENT SPIRAL H/W 3KW 1 ELK-140-KWI GEYSER ELEMENT SPIRAL 4KW 200L 3 FLG-337 KWIKOT FLANGE GASKET FOR SPIRAL ELEMENT 4 HW2682732 GEYSER ELEMENT BOSS WITH POCKET 2KW 100L 2 HW2682734 GEYSER ELEMENT BOSS WITH POCKET H/W 2KW 1 HW2682739 GEYSER ELEMENT BOSS WITH POCKET 3KW 150L 3 HW2682741 GEYSER ELEMENT BOSS WITH POCKET H/W 3KW 2 HW2682743 GEYSER ELEMENT BOSS WITH POCKET 4KW 200L 3 HW2682746 GEYSER ELEMENT BOSS WITH POCKET H/W 4KW 2 HW2682749 ELEMENT GEYSER SPANNER 2 HW2682751 GEYSER THERMOSTAT VKF7 650W-1KW 2
HW2682759 GEYSER THERMOSTAT VK11 2-4KW 4
HW2682770 GEYSER ELEMENT SPIRAL 2KW 100L 2
HW2682772 GEYSER ELEMENT SPIRAL 3KW 150L 3
HW2682773 ADVANCED VALVE TEMP & RELIEF FI 20MM 600KPA 2
HW2682783 GEYSER THERMOSTAT QUICK TERM TSE11 4
KH1.404CX ADVANCED VALVE TEMP & RELIEF FI 20MM 400KPA 2 KH1.404CXM ADVANCED VALVE TEMP & RELIEF MI 20MM 400KPA 2
KHN4-150CX ADVANCED VALVE VACUUM BREAKER 15MM CXC 10
LMF0012A ADVANCED VALVE PRESSURE CONTROL 15MM 400KPA 1
LMF0013A ADVANCED VALVE PRESSURE CONTROL 15MM 600KPA 1
LMF0014A ADVANCED VALVE PRESSURE CONTROL 22MM 400KPA 2
LMF0016A ADVANCED VALVE PRESSURE CONTROL 22MM 600KPA 2
LMFK400 VALVECO RECONED PRESSURE CONTROL KWIK FLO K400 1
LMFM400 VALVECO RECONED PRESSURE CONTROL MASTER FLO M400 1
LSG0008A ADVANCED VALVE VACUUM BREAKER 22MM CXC 20
LSC0102A
LSC0201A
QTY
CAPILLARY COUPLER SLIP CXC 22MM 30
CAPILLARY COUPLER STR CXC 15MM 40
LSC0202A CAPILLARY COUPLER STR CXC 22MM 30
LSC0401A CAPILLARY COUPLER CXFI 15MMX1/2 50
LSC0402A CAPILLARY COUPLER CXFI 22MMX3/4 40
LSC0601A CAPILLARY COUPLER CXMI 15MMX1/2 50
LSC0602A CAPILLARY COUPLER CXMI 22MMX3/4 40
LSC0802A CAPILLARY COUPLER CXMC 22MMX15MM 40
LSC0901A CAPILLARY COUPLER CXC 22MMX15MM 40
LSE0101A CAPILLARY ELBOW 45D CXC 15MM 40
LSE0102A CAPILLARY ELBOW 45D CXC 22MM 30
LSE0301A CAPILLARY ELBOW 90D CXC 15MM 100
LSE0302A CAPILLARY ELBOW 90D CXC 22MM 60
LSE0402A CAPILLARY ELBOW 90D CXC 22MMX15MM 40
LSE0501A CAPILLARY ELBOW 90D CXFI 15MMX1/2 40
LSE0502A CAPILLARY ELBOW 90D CXFI 22MMX3/4 20
LSE0701A CAPILLARY ELBOW 90D CXMI 15MMX1/2 40
LSE0702A CAPILLARY ELBOW 90D CXMI 22MMX3/4 20
LSE0901A CAPILLARY ELBOW WALL PLATE CXFI 15MMX1/2 30
LSE0902A CAPILLARY ELBOW WALL PLATE CXFI 22MMX3/4 30
LSQ0101A CAPILLARY CROSSOVER CXC 15M 20
LSQ0102A CAPILLARY CROSSOVER CXC 22MM 20
LST0101A CAPILLARY TEE CXCXC 15MM 70
LST0102A CAPILLARY TEE CXCXC 22MM 50
LST0202A CAPILLARY TEE CXCXC 22MMX15MM CENTER RED 50
LSZ0101A CAPILLARY END CAP 15MM 30
LSZ0102A CAPILLARY END CAP 22MM 20
STOCK CODE STOCK CODE DESCRIPTION
QTY
LCC0101A COMPRESSION BRASS COUPLER CXC 15MM 30
LCC0102A COMPRESSION BRASS COUPLER CXC 22MM 20
LCC0202A COMPRESSION BRASS COUPLER CXC 22MX15MM 20
LCC0301A COMPRESSION BRASS COUPLER CXFI 15MMX1/2 30
LCC0302A COMPRESSION BRASS COUPLER CXFI 22MM 3/4INCH 20
LCC0401A COMPRESSION BRASS COUPLER CXFI 15MMX3/4 10
LCC0501A COMPRESSION BRASS COUPLER CXMI 15MMX1/2 30
LCC0502A COMPRESSION BRASS COUPLER CXMI 22MMX3/4 20
LCC0601A COMPRESSION BRASS COUPLER CXMI 15MMX3/4 10
LCE0101A COMPRESSION BRASS ELBOW 90D CXC 15MM 30
LCE0102A COMPRESSION BRASS ELBOW 90D CXC 22MM 20
LCE0202A COMPRESSION BRASS ELBOW 90D CXC 22MMX15MM 20
LCE0501A COMPRESSION BRASS ELBOW 90D CXFI 15MMX1/2 10
LCE0502A COMPRESSION BRASS ELBOW 90D CXFI 22MMX3/4 10
LCE0601A COMPRESSION BRASS ELBOW 90D CXFI 15MMX3/4 10
LCE0701A COMPRESSION BRASS ELBOW 90D CXMI 15MMX1/2 10
LCE0702A COMPRESSION BRASS ELBOW 90D CXMI 22MMX3/4 10
LCE0801A COMPRESSION BRASS ELBOW 90D CXMI 15MMX3/4 10
LCE0901A COMPRESSION BRASS ELBOW WALL PLATE CXFI 15MMX1/2 20
LCE0902A COMPRESSION BRASS ELBOW WALL PLATE CXFI 22MMX3/4 10
LCT0101A COMPRESSION BRASS TEE CXCXC 15MM 30
LCT0102A COMPRESSION BRASS TEE CXCXC 22MM 20
LCT0201A COMPRESSION BRASS TEE CXCXC 22X22X15MM 20
LCT0701A COMPRESSION BRASS TEE CXCXFI 15MMX1/2 10
LCT0703A COMPRESSION BRASS TEE CXCXFI 22MMX3/4 10
LCT0901A COMPRESSION BRASS TEE CXCXMI 15MMX1/2 10
LCZ0101A COMPRESSION BRASS END CAP 15MM 10
LCZ0102A COMPRESSION BRASS END CAP 22MM 10
LCZ0301A COMPRESSION BRASS CAP NUT 15MM 20
LCZ0302A COMPRESSION BRASS CAP NUT 22MM 10
LCZ0601A COMPRESSION BRASS SPARE RING 15MM 50
LCZ0602A COMPRESSION BRASS SPARE RING 22MM 40
STOCK CODE STOCK CODE DESCRIPTION
LCC0101A
QTY
COMPRESSION BRASS COUPLER CXC 15MM 60
LCC0102A COMPRESSION BRASS COUPLER CXC 22MM 40
LCC0202A COMPRESSION BRASS COUPLER CXC 22MX15MM 40
LCC0301A COMPRESSION BRASS COUPLER CXFI 15MMX1/2 60
LCC0302A COMPRESSION BRASS COUPLER CXFI 22MM 3/4INCH 40
LCC0401A COMPRESSION BRASS COUPLER CXFI 15MMX3/4 20
LCC0501A COMPRESSION BRASS COUPLER CXMI 15MMX1/2 60
LCC0502A COMPRESSION BRASS COUPLER CXMI 22MMX3/4 40
LCC0601A COMPRESSION BRASS COUPLER CXMI 15MMX3/4 20
LCE0101A COMPRESSION BRASS ELBOW 90D CXC 15MM 60
LCE0102A COMPRESSION BRASS ELBOW 90D CXC 22MM 40
LCE0202A COMPRESSION BRASS ELBOW 90D CXC 22MMX15MM 40
LCE0501A COMPRESSION BRASS ELBOW 90D CXFI 15MMX1/2 20
LCE0502A COMPRESSION BRASS ELBOW 90D CXFI 22MMX3/4 20
LCE0601A COMPRESSION BRASS ELBOW 90D CXFI 15MMX3/4 20
LCE0701A COMPRESSION BRASS ELBOW 90D CXMI 15MMX1/2 20
LCE0702A COMPRESSION BRASS ELBOW 90D CXMI 22MMX3/4 20
LCE0801A COMPRESSION BRASS ELBOW 90D CXMI 15MMX3/4 20
LCE0901A COMPRESSION BRASS ELBOW WALL PLATE CXFI 15MMX1/2 40
LCE0902A COMPRESSION BRASS ELBOW WALL PLATE CXFI 22MMX3/4 20
LCT0101A COMPRESSION BRASS TEE CXCXC 15MM 60
LCT0102A COMPRESSION BRASS TEE CXCXC 22MM 40
LCT0201A COMPRESSION BRASS TEE CXCXC 22X22X15MM 40
LCT0701A COMPRESSION BRASS TEE CXCXFI 15MMX1/2 20
LCT0703A COMPRESSION BRASS TEE CXCXFI 22MMX3/4 20
LCT0901A COMPRESSION BRASS TEE CXCXMI 15MMX1/2 20
LCZ0101A COMPRESSION BRASS END CAP 15MM 20
LCZ0102A COMPRESSION BRASS END CAP 22MM 20
STOCK CODE STOCK CODE DESCRIPTION QTY
LSC0101A CAPILLARY COUPLER SLIP CXC 15MM 100
LSC0102A CAPILLARY COUPLER SLIP CXC 22MM 70
LSC0201A CAPILLARY COUPLER STR CXC 15MM 100
LSC0202A CAPILLARY COUPLER STR CXC 22MM 70
LSC0401A CAPILLARY COUPLER CXFI 15MMX1/2 130
LSC0402A CAPILLARY COUPLER CXFI 22MMX3/4 100
LSC0601A CAPILLARY COUPLER CXMI 15MMX1/2 130
LSC0602A CAPILLARY COUPLER CXMI 22MMX3/4 100
LSC0802A CAPILLARY COUPLER CXMC 22MMX15MM 100
LSC0901A CAPILLARY COUPLER CXC 22MMX15MM 100
LSE0101A CAPILLARY ELBOW 45D CXC 15MM 100
LSE0102A CAPILLARY ELBOW 45D CXC 22MM 80
LSE0301A CAPILLARY ELBOW 90D CXC 15MM 250
LSE0302A CAPILLARY ELBOW 90D CXC 22MM 150
LSE0402A CAPILLARY ELBOW 90D CXC 22MMX15MM 100
LSE0501A CAPILLARY ELBOW 90D CXFI 15MMX1/2 100
LSE0502A CAPILLARY ELBOW 90D CXFI 22MMX3/4 50
LSE0701A CAPILLARY ELBOW 90D CXMI 15MMX1/2 100
LSE0702A CAPILLARY ELBOW 90D CXMI 22MMX3/4 50
LSE0901A CAPILLARY ELBOW WALL PLATE CXFI 15MMX1/2 70
LSE0902A CAPILLARY ELBOW WALL PLATE CXFI 22MMX3/4 70
LSQ0101A CAPILLARY CROSSOVER CXC 15M 50
LSQ0102A CAPILLARY CROSSOVER CXC 22MM 50
LST0101A CAPILLARY TEE CXCXC 15MM 180
LST0102A CAPILLARY TEE CXCXC 22MM 130
LST0202A CAPILLARY TEE CXCXC 22MMX15MM CENTER RED 130
LSZ0101A CAPILLARY END CAP 15MM 70
LSZ0102A CAPILLARY END CAP 22MM 50
STOCK CODE STOCK CODE DESCRIPTION
QTY SHELF
9811023 WASTE BEND 90DEG UG 110MM SABS 12 1 PUB110/22 WASTE BEND 22.5DEG UG 110MM 12 9811022 WASTE BEND 45DEG UG 110MM SABS 12 2 9811037 WASTE END CAP FEMALE UG 110MM SABS 30 9811032 WASTE GULLEY P TRAP UG 110MM SABS 6 3 9811030 WASTE GULLEY ROUND COMPLETE UG 110MM SABS 12 9811027 WASTE JUNCTION 45DEG UG I.E LH 110MM SABS 6 4 9811028 WASTE JUNCTION 45DEG UG I.E RH110MM SABS 6 9811035 WASTE JUNCTION 45DEG UG IE UNIV 110MM SABS 9 5 9811029 WASTE RODDING EYE 45DEG UG 110MM SABS 10 9811026 WASTE JUNCTION 45DEG UG PL 110MM SABS 9 6 9811034 WASTE SOCKET DOUBLE UG 110MM SABS 10 7 9811033 WASTE SOCKET KIMBERLEY UG 110MM SABS 20 9811024 WASTE SOCKET UG SOLVENT/RING 110MM SABS 20
S110BNS164 WASTE BEND 45DEG SV I.E 110MM SABS 6 8 S110BNS159 WASTE BEND 45DEG SV PL 110MM SABS 10 S110SJ085 WASTE JUNCTION 45DEG SV I.E 110MM SABS 2
LM4820 WASTE JUNCTION 45DEG SV PL 110MM SABS 2
9911007 WASTE BEND 87.5DEG SV I.E 110MM 14 9 9911006 WASTE BEND 87.5DEG SV PL 110MM 15 9911004 WASTE BEND VENT HORN 87.5DEG SV I.E 110MM SABS 14 10 9911010 WASTE JUNCTION 87.5DEG SV I.E 110MM 10 9911009 WASTE JUNCTION 87.5DEG SV PL 110MM SABS 10 11 9911016 WASTE JUNCTION RED 87.5DEG SV I.E 110X50MM SABS 5 9911015 WASTE JUNCTION RED 87.5DEG SV PL 110X50MM SABS 10
STOCK CODE STOCK CODE DESCRIPTION
QTY SHELF
9911012 WASTE PAN CONNECTOR BEND SV I.E 110MM 6 12 9911003 WASTE PAN CONNECTOR STRAIGHT SV 110MM 10 9911033 WASTE SOCKET KIMBERLEY SV 110MM SABS 18 9911005 WASTE SOCKET SV SOLVENT/RING 110MM SABS 18 13 9911011 WASTE STRAP-ON BOSS SV 110X50MM 40 9905011 WASTE ADAPTOR FEMALE SV 50X1-1/2 SABS 30 9905012 WASTE ADAPTOR MALE SV 50X1-1/2 SABS 30 9905008 WASTE BEND 45DEG SV I.E 50MM SABS 30 9905006 WASTE BEND 45DEG SV PL 50MM SABS 50 14 9905005 WASTE BEND 87.5DEG SV PL 50MM SABS 50 9905013 WASTE JUNCTION 87.5DEG SV PL 50MM SABS 50 9905023 WASTE JUNCTION 45DEG SV PL 50MM SABS 20 15
9905007 WASTE BEND 87.5DEG SV I.E 50MM SABS 30 9905024 WASTE JUNCTION 45DEG SV I.E 50MM SABS 20 9905014 WASTE JUNCTION 87.5DEG SV I.E 50MM SABS 40 9905009 WASTE SOCKET SV 50MM SABS 60 9905015 WASTE END CAP FEMALE SV 50MM SABS 30 9905010 WASTE SOCKET REDUCING SV 50X40MM SABS 20 16
9911008 WASTE ECSENTRIC REDUCING SV 110X50MM 10 9911002 WASTE VENT VALVE 2WAY 110MM SABS 20 9905002 WASTE VENT VALVE 2WAY 50MM ECONO SABS 25 9911020 WASTE HOLDER BATT ALUMINIUM 110MM 20 9905020 WASTE HOLDER BATT ALUMINIUM 50MM 30
Total SKU’s 48 16
STOCK CODE
609001
STOCK CODE DESCRIPTION
QTY
PVC FASCI CONNECTOR 20
609002 PVC BARGE CONNECTOR 10
609004 PVC BOARD FIXING SCREW & CAP (25/BAG) 10
CO12W PVC GUTTER HALF-ROUND OUTLET ROUND 10
GC12W PVC GUTTER HALF-ROUND CONNECTOR 15
PB45W PVC GUTTER ROUND DOWNPIPE BEND 45DEG 10
PB90W PVC GUTTER ROUND DOWNPIPE BEND 90DEG 10
PPEB.145B
PVC GUTTER ROUND OFFSET BEND 30
PPECON.140 PVC GUTTER ROUND DOWNPIPE CONNECTOR 20
PPEHB130 PVC GUTTER ROUND DOWNPIPE HOLDERBAT 40
PPESHO.155B
PVC GUTTER ROUND DOWNPIPE SHOE 20
SB12W PVC GUTTER HALF-ROUND BRACKET 30
SE12W PVC GUTTER HALF-ROUND STOPEND 20
UA12W PVC GUTTER HALF-ROUND CORNER 10
STOCK CODE
GA20D
STOCK CODE DESCRIPTION
QTY /BIN
PVC GUTTER D-SHAPE CORNER 10
GPEOUT.100 PVC GUTTER D-SHAPE OUTLET ROUND 10
GPEBRA.095B PVC GUTTER D-SHAPE BRACKET 30
PB45W PVC GUTTER ROUND DOWNPIPE BEND 45DEG 10
PB90W PVC GUTTER ROUND DOWNPIPE BEND 90DEG 10
PPEB.145B
PVC GUTTER ROUND OFFSET BEND 30
PPESHO.155B PVC GUTTER ROUND DOWNPIPE SHOE 20
PPECON.140 PVC GUTTER ROUND DOWNPIPE CONNECTOR 20
PPEHB130 PVC GUTTER ROUND DOWNPIPE HOLDERBAT 40
GPESE.110B PVC GUTTER D-SHAPE STOPEND 20
609004 PVC BOARD FIXING SCREW & CAP (25/BAG) 10
609002 PVC BARGE CONNECTOR 10
609001 PVC FASCI CONNECTOR 20
STOCK CODE STOCK CODE DESCRIPTION
LRH002A
LRH001A
QTY
PVC GUTTER LEAF CATCHER GUTTA-BUDDY 8
PVC GUTTER ROUND DOWNPIPE JUNCTION 90DEG 6
LRH005A PVC GUTTER FIRST FLUSH DIY KIT 4
STOCK CODE STOCK CODE DESCRIPTION
QTY
UT2024A UNITWIST WALLPLATE ELBOW CXF 15MMX1/2 20
UT2041A UNITWIST TEE FI CXCXF 15X15MMX1/2 20
UT2040B UNITWIST TEE EQUAL CXCXC 22MM 20
UT2040A UNITWIST TEE EQUAL CXCXC 15MM 30
UT2043R UNITWIST TEE CENTRE REDUCING CXCXC 22X22X15MM 20
UT2005B UNITWIST STOP END STANDARD 22MM C 10
UT2005A UNITWIST STOP END STANDARD 15MM C 20
HB22U UNITWIST MASTERBAT 22MM 100
HB15U UNITWIST MASTERBAT 15MM 100
UT2021R UNITWIST MALE IRON ELBOW RED 15MMX3/4 10
UT2021B UNITWIST MALE IRON ELBOW 22MMX3/4 10
UT2021A UNITWIST MALE IRON ELBOW 15MMX1/2 20
UT2022R UNITWIST FEMALE IRON ELBOW FXC RED 15MMX3/4 20
UT2022B UNITWIST FEMALE IRON ELBOW FXC 22MM 20
UT2022A UNITWIST FEMALE IRON ELBOW FXC 15MM 30
UT2020R UNITWIST ELBOW CXC REDUCING 22X15MM 20
UT2020B UNITWIST ELBOW CXC 22MM 20
UT2020A UNITWIST ELBOW CXC 15MM 30
UT2001R UNITWIST COUPLER STRAIGHT MALE IRON CXM RED 15MMX3/4 20
UT2001B UNITWIST COUPLER STRAIGHT MALE IRON CXM 22MMX3/4 20
UT2001A UNITWIST COUPLER STRAIGHT MALE IRON CXM 15MMX1/2 30
UT2002R UNITWIST COUPLER
UT2002B
UT2002A
UT2000R
UT2000B
UT2000A
PC22BT
PC15BT
Please be aware that due to the ever expanding and extensive current range of products displayed in this catalogue, products available may vary from goods depicted or described. At the time of going to print, great care and effort was undertaken to ensure that details provided in the catalogue are accurate. Agrinet cannot be held liable for any omissions or errors that might have occurred during the development of this catalogue.
For any questions regarding plumbing products, please contact the Agrinet Plumbing Department / Service Centre at Samrand: (012) 657 2222 | Bellville: (021) 959 5420.
Agrinet reserves the right at all times to make changes to stocked ranges and products. Please refer to www.agrinet.co.za for all the latest information. E&OE.