Dear Sir Ideally, working in the Engineering field will allow me the opportunity to utilize my experience in conducting and controlling the functions which I gained through working in manufacturing atmosphere and I would like to be part of an organization that offers potential growth, advancement opportunities and stability. For your convenience; I have attached my resume for your review. Realizing the limitations of the written page in presenting my qualifications and I would welcome the opportunity to participate in a personal interview to answer any of your questions and better present my qualifications. Thank you for your time and consideration Sincerely,
Eng. Ahmed Mohamed Mohamed Medany
Page 1 of 7
Ahmed Mohamed Mohamed Medany Address: in Egypt, 35 Kafr Tohormos St. / Faysal st. – Giza In Saudi Arabia,Yanbu Cement Company Colony-yanbu El bahr Tel: +966-2456982
(Home)
Mobile: +0020122994674 E-mail address: medany_84@yahoo.com
OBJECTIVE Seeking a challenging position in the Quality Control and Quality Assurance of Tanks Construction, Pressure Vessels Fabrication, Piping work and Steel work in a company, which is dynamic and progressive, a position where hard workers are recognized developed and rewarded. PERSONAL INFORMATION • • • •
Nationality: Egyptian Date of Birth: 1/7/1985 Marital Status: Single Military Service: Completed
EDUCATION • • • •
Bachelor of Engineering, Faculty of Engineering Cairo University, Department of Metallurgical Engineering. Year of graduation: 2007 Grade: Good Project grade: Distinction
PROJECT OF GRADUATION The Influence of Organic Inhibitors in Hydrochloric Acid Pickling Process on: •
Corrosion Damage.
•
Hydrogen Damage.
TRAINING EXPERIENCES 1/9/2005 till 30/9/2005
KHALDA PETROLUIM COMPANY Page 2 of 7
•
Training: •
Corrosion Control.
•
Cathodic protection.
•
Inspection by Ultrasonic and Radiographic methods.
15/8/2006 till 30/8/2006 •
ORASCOM COMPANY
Training: • •
Welding Processes. Inspection by Ultrasonic method.
TECHNICAL QUALIFICATION •
IWE (INTERNATIONAL WELDING ENGINEER) FROM IIW (INSTITUTE OF INTERNATIONAL WELDING ).
•
Qualified in NDT level II in accordance with ASNT: o
Liquid Penetrant Test (PT),
o
Magnetic Particle Inspection (MT),
o
Ultrasonic Test (UT) &
o
Radiographic Testing Method (RT).
o
Visual Examination Method (VT).
SKILS 1. Computer Skills: • Excellent command of MS Office, I have very good internet skill & Good knowledge in using AutoCAD. 2. Language Skills: • Arabic (Mother Tongue) & Good command of spoken and written English. PERSONAL FEATURE • • • •
Presentation skills Working under pressure Problem solving skills Decision-making skills Page 3 of 7
• •
Analytical skills Multi-task ability
PROFESSIONAL EXPERIENCE Employer: ( DSD FERROMETALCO ) Period: Aug-2007 till Feb-2009 My Job Title: Welding Engineer.
Tasks and Duties: •
Very good experience in pipe line, piping work & preparation of all project documents approved with third party.
•
Working by a lot of International Codes and Standards (ASME IX, V, ASME VIII Dev.1, II, ASME B31.3, AWS D1.1 & AWS A5 series for filler metals.
•
Inspection & Quality checking of incoming / outgoing material.
•
Handling Third Party (LLOYD’s REGISTER) Inspections (Material inspection, as per client specifications, marking, color coding checking …etc.)
•
Handling Non confirmation reports (NCR) of discrepant material.
•
Handling non-confirmation reports (NCR) of any workshop / field activities according to client specification, applied codes and standards.
•
Following up with suppliers / manufacturers / clients to resolve the NCR issues.
•
Coordinating with internal purchasing, and finance departments for quick delivery of material at clients end and to resolve NCR related issues.
•
Creating awareness to meet quality objectives, ISO 9001, health, safety and environment through different Medias such as banners, slogans etc.
•
Conducting internal Quality Audit as per quality manual.
•
Maintenance and update of quality manual as per ISO 9001 guidelines.
•
I have good practical field experiences in different welding processes.
•
Preparation of PQRs and WPSs as per project requirement. Page 4 of 7
•
Welders’ performance qualification, welders ID card, daily welding progress reports and welders’ acceptable percentage reports.
•
Visual Inspection of welded joints.
•
Interpretation of Radiographs of welded joints in accordance with applied codes.
•
Witness for MT & PT workshop & field welded joints.
•
Good experience in (UT) angular beam and lamination detection.
•
Preparation of Inspection Testing Plan (ITP) & procedures of project according to client specification.
•
Coordination of client, third party & subcontractors.
•
Review documents and final inspection of project.
•
Inspection and dimension control of structures in pre-fabrication and erection as per drawing, client specification & ITP.
Employer: SHOTMED
Engineering Company
Project: Pipe Line Corridor (PLC) Period: Feb-2009 till 31-5-2009 Client: TCI SANMAR CHEMICALS "Indian Company" Engineering Consultant: TECHNIP INDIA LTD Third Party: LLOYD's REGISTER My Job Title: QA/QC Engineer (Contractor Representative)
Tasks and Duties: •
Preparation of all project documents approved with third party.
•
Working by International Codes and Standards (ASME IX, V, ASME VIII Dev.1, ASME II, ASME B31.3, AWS D1.1 & AWS A5 series for filler metals).
•
Preparation of Inspection Testing Plan (ITP) & procedures of project according to Page 5 of 7
client specification. •
Preparation of PQRs and WPSs as per project requirement.
•
Welders’ performance qualification, welders ID card, daily welding progress reports and welders’ acceptable percentage reports.
•
Visual Inspection of welded joints.
•
Handling Third Party (LIOYD’s REGISTER) Inspections (Material inspection, as per client specifications, marking, color coding checking …etc.)
•
Interpretation of Radiographs of welded joints in accordance with applied codes.
•
Witness for MT & PT workshop & field welded joints.
•
Coordination of client, third party & subcontractors.
•
Inspection and dimension control of structures in pre-fabrication and erection as per drawing, client specification & ITP.
•
Inspection & Quality checking of incoming / outgoing material.
•
Handling Non confirmation reports (NCR) of discrepant material.
•
Handling non-confirmation reports (NCR) of any workshop / field activities according to client specification, applied codes and standards.
•
Following up with suppliers / manufacturers / clients to resolve the NCR issues.
•
I have good practical field experiences in different welding processes.
•
Good experience in (UT) angular beam and lamination detection.
•
Coordinating with internal purchasing, and finance departments for quick delivery of material at clients end and to resolve NCR related issues.
•
Creating awareness to meet quality objectives, ISO 9001, health, safety and environment through different Medias such as banners, slogans etc.
•
Conducting internal Quality Audit as per quality manual.
•
Maintenance and update of quality manual as per ISO 9001 guidelines.
•
Review documents and final inspection of project.
Page 6 of 7
Employer: Yanbu Cement Company Period: July-2009 till now My Job Title: Welding Engineer .
Tasks and Duties: •
Supervisor for all welding job in the plant.
•
Maintenance and update spares for desalination plant.
•
Workshop activity like machining,fabrication,and maintenance of gear boxes,blowers,compressors,and Pumps.
Page 7 of 7