Airlo & Theraflow Mattresses - Range Overview

Air-Lo & Theraflow

Alternating Air Mattress Range Breakthrough Pressure Relief Technology

Mattress Selection Guide Refers to Waterlow Scale <10 Low Risk

10+ Medium Risk

15+ High Risk

20+ Very High Risk

L

M

H

V

Existing Pressure Area/s?

No

Yes

Prevention Solutions

Treatment Solutions

Patient Weight 200kg+

Yes

Foot Ulcer Only

No Patient Weight>100kg

Diabetic or Labile Blood Flow

Patient can self assist for transfers etc ...

No

Air-Lo 5 Overlay

Air-Lo 3 Overlay

2

M

Medium Risk

H

High Risk

No

Patient needs permanent incline for respiration

Yes

Low Risk

Yes

No

Yes

L

Patient Weight 200kg+

No

V

Very High Risk

Yes

No

Yes

Focussed Reperfusion Treatment

Yes

Air-Lo 8

Mattress Replacement

Theraflow

Mattress Replacement

Theraflow Bariatric

Mattress Replacement

Mattress Specifications M

M

H

Airlo & Theraflow are registered in the ARTG, AUST R ARTG 175810

V

H

V

Air-Lo 3

Air-Lo 5

Air-Lo 8

Theraflow

Single

King Single

Single

King Single

Single

King Single

Bariatric

(Overlay)

PTM636629

PTM636630

PTM636631

PTM636635

PTM636636

PTM636640

PTM636645

PTM636646

PREVENTATIVE

TREATMENT

MATTRESS SPECIFICATIONS Dimensions (mm) (H x W x L)

75 x 900 x 2000

125 x 900 x 2000

125 x 1070 x 2000

200 x 900 x 2000

200 x 1070 x 2000

250 x 900 x 2000

250 x 1070 x 2000

No. of Cells

22

18

20

28

Static Head Cells

3

4

Side Bolster Cells

-

2 per side

Cell Material

TPU

TPU, high density, multi-zoned

Cell Cycle

1 in 2

Paired 1 in 2

14 minutes per cycle

8-10 minutes per cycle

12 minutes per cycle

8-10 minutes per cycle

Positioning Handles

-

2 per side

Weight Capacity

120 kg*

150 kg*

170 kg*

200 kg*

200kg*

200 kg*

350 kg*

Warranty

1 Year

Alternating Mode

COVER SPECIFICATIONS Top Cover

Plastibert 2 way stretch Welded

Dartex Welded

Sioen Multi Stretch Welded

Base/s

Nylon TPU Welded

Assorted PU & PVC’s - Welded

CONTROL UNIT SPECIFICATIONS Dimensions (mm) (W x H x D)

270 x 210 x 100

250 x 250 x 170

2.5kg

3kg

240V 50Hz 12VA

Air Flow

10 L/min

20 L/min

Static/Transport Mode

Timeout - 60 mins

Care Mode

-

Timeout - 20 mins

Incline Mode

-

w/ Auto Tilt Sensor

2 Years

Weight Power Rating

Warranty

*Weight specifications are recommendations only and are based on a patient with normal weight distribution, in a supine, reclined position. Therapists and carers should always assess the suitability of a support system based on the particular weight profile of their patient.

3

The

Difference

The Air-Lo line of Alternating Pressure Care mattresses provide the latest in alternating pressure technology combined with comfort, support and infection control.

THE THERAPY DIFFERENCE Feature

Advantage

Machine welded thermal polyurethane cells

Strong construction provides support with stretch properties for comfort and care

Two way stretch European top cover

Better stretch properties result in improved pressure release and comfort

Hi flow computer controlled air distributor

Gives instant response to user input and longer deflation periods. Larger release valve ensures faster deflation

Latest generation therapy program

Results in more pressure release through the alternation cycle with less inflation time

UNBEATABLE INFECTION CONTROL Feature

Advantage

Machine welded top cover and base

No stitching or tape that can break down or allow moisture wicking into the cell section

European PU top cover 95Ë&#x161;C machine wash and tumble dry for disinfection

A heat wash at a higher temperature more effectively kills bacteria such as MRSA

Welded low profile zipper with plastised backing

This minimises the chance of any moisture ingress through the zipper sections

DESIGN INNOVATIONS Feature

Advantage

Internal power cord

Avoids the risk of the power cord getting damaged or pinched when the bed moves

Simple to operate control units

A 3D Auto Sensor System in the Air-Lo 5 and 8 automatically determines best therapy setting for each patients weight, position and profile

ALL CONTROL UNITS Feature

Specifics

Output

10L/min

Rotor Valve

Computer controlled

Air-release

Full hose diameter

Noise levels

Internal muffler system

Hose connect

Single moulding

Power

Internal to mattress. Breakaway system optional

PTM636625 An optional Air-Lo Hyper-Stretch Coverlet is highly recommended to be fitted under all Air-Lo top covers to ensure maximum patient comfort and insulation from cell chill.

4

Alternating Air Overlay Support System

Air-Lo 3 Overlay

M

Single: PTM636629

A 3 inch support and therapy system for the prevention of pressure injuries. High quality, two way stretch cover that is fully welded and features waterfalls over zips for maximum infection control.

40 cm

22 pure TPU transverse air cells alternate one in every two. They stretch under the patient to provide maximum comfort and protection.

Elasticised side straps securely

Chair bond Weight: the overlay to16kg any regular

Easy to use analogue control unit and simple diagnostics. Intermittent operation ensures a long pump life.

single mattress.

44 – 50 cm

Max. User Weight:

Power cord is run inside the overlay to avoid dangerous threading under the bed or on the floor.

SWL

125kg 120KG Single

Air-Lo 5 Overlay

M

Single: PTM636630 King Single: PTM636631

A 5 inch support and therapy system for the prevention of pressure injuries. A state of the art, internal air release valve with a high capacity to ensure instant response and the fastest release of pressure possible.

High quality, two way stretch cover that is fully welded and features waterfalls over zips for maximum infection control.

Medical grade power cord is run inside the overlay to avoid dangerous threading under the bed or on the floor.

40 cm Easy to use digital control unit with a choice of 3 care modes is whisper quiet ensuring a restful sleep. Tamper-proof lockout and simple diagnostics.

High capacity, yet unobtrusive side CPR release gives maximum safety in the event of a cardiopulmonary emergency.

40 cm

Tilt sensor automatically adds more pressure when patient is inclined.

Chair Weight: Chair16kg Weight:

16kg

Cell disconnection valves allow the four end foot cells to be completely deflated to assist in suspending a patient’s heels.

44 – 50 cm44 –Lifecomfort 50 cm Pressure Safety Underlay

An optional pressure safety underlay is Max. User recommended to be used in conjunction withWeight: an Air-Lo 3 or Air-Lo 5.

Max. User SWL Weight: 125kg 150KG Single

SWL 125kg 170KG King Single

5

Alternating Air Mattress Replacement with Auto Tilt Sensor & Heel Suspension

Air-Lo 8 Mattress

H

Single: PTM636635 King Single: PTM636636

A full mattress replacement to provide clinical support and management of pressure areas in high risk patients.

High quality two way stretch top cover is fully welded and can be washed at high temperatures for total infection control.

Static head section eliminates patient dizziness and disorientation.

Auto tilt sensor adjusts pressure when patient is inclined.

20 transverse air cells alternate to provide maximum prevention and therapy, while permanently inflated safety sections eliminate bottoming out risk.

High capacity yet unobtrusive side CPR release gives maximum safety in the event of a cardiopulmonary emergency. This new design can easily be opened or closed without having to un-zip the top cover.

Waterfall zipper covers are turned and welded for maximum infection control and zip protection.

Cell disconnection valves allow the top section of the foot cells to be completely deflated to fully suspend a patient’s heels. Extremely quiet, almost silent pump with a choice of 3 care modes and comfort settings in a simple to operate digital control unit. Tamper proof lockout, static time-outs and simple diagnostics.

A state of the art, internal air release valve is directly connected to the computer for instant response. It’s high capacity ensures the fastest release of pressure possible.

40 cm

Medical grade power cord is run inside the mattress to avoid dangerous threading under the bed or on the floor.

Chair Weight: Chair16kg Weight:

44 – 50 cm44 – 50 cm

Max. User Max. User SWL SWL Weight: 200KG Weight: 200KG 125kg 125kg Single

6

16kg

King Single

Reperfusion Support System

Theraflow Mattress

V

Single: PTM636640 King Single: PTM636645 Bariatric: PTM636646

A full mattress replacement for the patient at very high risk. Independently tested to show pressure release performance. The coverlet is constructed with a 1cm layer of hyper-stretch open cell foam which in turn is coated with a micromesh material similar to that used in high performance athletic wear to wick moisture away from the body.

The patented DynamULinkTM cell design uses elasticised members to transfer the power of inflating cells to force down the deflating sets. This alternately removes almost all interface pressure under nearly 80% of the patient’s body.

A robust side skirt design integrated into the coverlet binds the whole mattress together increasing the system’s ability to support a variety of patient loads safely and securely.

Mattress cells alternate in a paired 1-in-2 pattern for optimal restoration of blood flow to tissues.

Additional static side cells provide extra support to patients, especially during transfers and repositioning (king single & bariatric only).

Fully welded outer covers for total infection control, with a unique “mattress within a mattress” design, ensure complete protection.

The coverlet not only insulates the patient from “Cell Chill” but also from any excess moisture buildup. The thin foam layer also assists in avoiding reperfusion injury in patients at high risk of sub-dermal vascular damage.

Effective pressure redistribution and off-loading backed up by evidence.

40 cm

44 – 50 cm44 – 50 cm 44 – 50 cm

40 cm The at risk heel area is completely elevated for nearly 30% of the alternation cycle. This unique cell design allows cell pairs to naturally remain upright when normal cells deform or collapse under patient weight.

Chair Weight: Chair16kg Weight: Chair16kg Weight:

Max. User Max. User Max. User SWL SWL Weight: 200KG Weight: 200KG Weight: 125kg 125kg Single

King Single

16kg

SWL

125kg 350KG Bariatric

7

Air Alternating Overlay Support System

The

Difference

COMPARE THE DIFFERENCE The Theraflow patented DynamULink™ cell design represents the greatest leap forward in pressure release in an alternating support surface. In the past, forcing pressure from cells was only possible using expensive and noisy vacuum pumps inside the control units. Other alternating systems rely on the gradual passive release of air from a mattress through a valve in the control unit. The Theraflow system cleverly uses the energy of the inflating cells themselves to force deflate the adjoining cells. This literally “collapses” deflating cells away from the patient. This innovation, in combination with a suite of innovative features, makes the Theraflow the only choice in the effective high risk prevention and treatment of existing pressure areas.

Standard Alternating Mattress System

THE TREATMENT DIFFERENCE DynamULink™ cells collapse away from the patient removing pressure faster and for longer

Pressure release is passive, slower and less pronounced

Cells deflate in pairs ensuring a larger area under the patient for reperfusion

Cells deflate individually, dividing any reperfusion effect into smaller areas of the body

Cell collapse helps elevate the heels every several minutes allowing total reperfusion

Heels are relieved but not elevated

Hyperstretch micromesh coverlet insulates the patient from the risk of cell shear and cell chill

Cell chill may cause vaso-constriction. Firm inflated cells may cause shearing

The Hyperstretch Coverlet is standard in every Theraflow - it’s 1cm of foam provides insulation and comfort from the alternation surface

An alternating surface can not only feel cold but may also interrupt the normal sleep cycle. This can inhibit the body’s ability to heal

All outer surfaces are welded - cover and base

Top covers and bases often stitched or taped

Machine wash and dry top cover and coverlet

Any foam parts cannot be decontaminated

Unique mattress-in-mattress barrier design

Cell section cannot be removed from base

Autostick PVC base - no bed straps necessary

Bed straps can often tear holes into the base

ABR31.22 130717

THE COMFORT DIFFERENCE

Turn static files into dynamic content formats.

Create a flipbook