DECORATION AND OTHER COMPONENTS If the packaging is printed directly, the printing inks must at least be EuPIA-compliant and non-bleeding in order to prevent potential contamination. Minimal printing with light or glazing colours is advantageous. If labels are used, they should be made of the same base material as the packaging (e.g. HDPE, LDPE, MDPE, LLDPE). In-mould labels made of PE can also be used. However, a high degree of printing can have a negative effect here, as the label is recycled together with the base material. If the decoration is made of a material other than PE, a maximum of 50% of the packaging surface should be covered so as not to hinder the correct sorting of the base material8. The batch coding and the indication of the best-before date should best be carried out in the form of an embossing or laser marking. Wet-strength paper labels are preferable to conventional paper labels as they do not release fibres that contaminate the recyclate. Labels made of PP/ OPP and PET can be used if necessary, provided that a maximum of 50% of the packaging surface is covered8. In addition, all labels made of a material other than PE should be water-washable to ensure separation from the PE fraction and no adhesive residue should remain. The batch coding and indication of the best-before date can, if necessary, also be carried out by means of minimal direct printing with other coding systems (e.g. ink-jet), provided that food-grade inks are used. Labels made of other materials that are not water-washable can negatively affect the sorting or recyclate quality of the PP fraction. PVC labels should generally be avoided, even if they are water-washable. Large-scale decorations (> 50% of the packaging surface) made of a material other than PE can impair the sorting of the packaging8. Adhesive materials containing metal or aluminium (with a layer thickness of > 5 µm) can lead to unwanted sorting into the metal fraction. Bleeding inks should be avoided.
CLOSURE SYSTEM Closures are ideally made of the same base material as the tube (e.g. HDPE, LDPE, LLDPE, MDPE). Closure systems without liners are preferable. If necessary, EVA or TPE liners should be used. If sealing foils are used, they must be easy to remove without leaving any residue. Flexible closures made of PE and PP plastic laminates are compatible with the PE fraction in small quantities9. PP closures can lead to contamination in larger quantities9. Closures made of other materials such as PET, PET-G, PS and PLA should be avoided, as these can lead to secondary contamination of the PE fraction. Metals, thermosets, EPS, PVC as well as seals and silicones that cannot be completely removed are considered interfering substances. Pump systems made of other materials (especially with glass & metal springs) also represent interfering materials. Sealing foils that are not completely removable and contain an aluminium component (layer thickness > 5 µm) can impair the sorting.
DESIGN RECOMMENDATIONS FOR PACKAGING TYPES
45
