FLUE DILUTION HIGH PERFORMANCE SYSTEMS FOR A RANGE OF APPLICATIONS
Airtherm offer fan dilution systems to suit many appliances, from modern high efficiency condensing to gas blown and atmospheric boilers.
Flue
P: 0844 809 2509
Dilution
F: 01384 375218
Systems
E: sales@airtherm.co.uk
SECTORS We serve Commercial
Educational
Retail
Industrial
Health Care
Leisure
Design There are many design considerations that must be achieved, for instance, the correct sizing of the fan unit, dilution header, inlet and discharge plenum boxes, the location to adjacent buildings, openable windows, fresh air vent pipes and final discharge height. These can be found from the Clean Air Act memorandum, IGEUP/10 or BS6644.
Installation Our installation teams are made up of experienced personnel that are fully trained and aware of all the necessary statutory requirements and standards for every project they undertake. We offer a design, supply and installation service for flue dilution systems, and can offer a tailoredmade package to site conditions and customer requirements We can provide technical solutions for the specialist areas of high temperature exhaust systems, fan assisted, flue dilution and atmospheric applications.
Airtherm Ventilation Solutions
Advantages Using Airflow •
ErP 2013/2015 compliant
•
Environmentally friendly answer to costly and unsightly flues
There are significant advantages in using dilution
•
Dilutes carbon combustion
fans instead of conventional
emissions from commercial
flue stacks as they offer the
gas boilers
opportunity for the flexible
•
siting of boiler and water heaters within the boiler room, and the elimination of
safe discharge at low levels •
on efficient and quiet double
input •
system failure
capable of overcoming the runs, and, with the built-in self proving safety switches safety is not compromised in the event
of fan failure or flue blockage.
Extra safe - pressure switch shuts off gas supply on
inlet centrifugal fans they are system resistance of flue duct
Allows flexible siting of gas
boilers rated 80 to 650kW
unsightly external, or expensive internal flues. Based
Less than 1% content enables
•
EuP IE2 compliant
HIGH PERFORMANCE FLUE DILUTION SOLUTIONS SUITABLE FOR A RANGE OF COMMERCIAL, INDUSTRIAL AND DOMESTIC APPLICATIONS FROM AIRTHERM ENGINEERING LIMITED.