DEEPWATER GUIDEWIRE ANCHOR ROV operated anchor for efficient subsea connection of guidewires
IMENCO has supplied the SUBSEA industry with guide wire anchors and guide posts since 1988. For increasing depths, Imenco can offer an anchor with capacity to 45 tons (100.000 Lbs) wire tension. The Imenco design has been specified for projects down to 2200 msw (6.600 feet) and wire dia 1-1/2” (38 mm). The anchor is designed to fit a standard 8-5/8” o.d. Guide Post or larger dia. Guide Post.
Guide wire anchor main measurements shown on figure above.
Main features: • Proven and patented design. • Simple installation and release by ROV. No special tools required • Fits standard API guidepost • Special receptacle required • Release and re-installation possible in same run • Shear-pin release with shear capacity up to 100 000 lbs. All shear-pin parts are automatically retrieved after operation. • All stainless steel construction • Supplied with full documentation and instructions. Data:
Imenco AS Stoltenberggt. 1
Anchor stab diameter
117 mm
Over all length
830 mm
Standard socket wire diameter
1-3/4” / 1-1/2”
Weight
65 kp
Available shear-pin capacity
To 45 ton / 100 000 Lbs.
P.O. Box 2143 N-5504 Haugesund
Tel. +47 52 86 41 00 Fax. +47 52 86 41 01
E-mail address: imenco@imenco.no
Homepage www.imenco.no