CONTENTS CONTEMPORARY Luminaires ........................................................... 622, 624-625 Crossarms and Wall Brackets...............................................626 Poles............................................................................623, 627 RAPID-SHIP Luminaires ...........................................................................628 Posts....................................................................................629 Wall Brackets .......................................................................630 Bollards................................................................................630 Assemblies...........................................................................631 HISTORICAL Luminaires ...........................................................................632 Arms ....................................................................................633 Posts....................................................................................634 Bollards................................................................................635 SIGNAGE Banner Arms ........................................................................636 Street Signs..........................................................................637
ANTIQUE STREET LAMPS 621
CONTEMPORARY
Luminaires
PRODUCT INFORMATION Intended Use Oslo luminaires and lighted bollards are designed for applications where cut-off performance and contemporary architectural style are desired. Typical applications include street lighting, downtowns, parks, public areas and mall interiors.
OSLO LUMINAIRES & LIGHTED BOLLARD
Please refer to our website at www.antiquestreetlamps.com for specifications. Construction Material: The luminaires are cast, die-cast and spun
aluminum. The bollard is cast and extruded aluminum. Flat lens is manufactured of clear impact-resistant tempered glass. Finish: The luminaires are finished with a premium polyester powder coating. Standard colors are black or dark bronze. Optics Anodized segmented reflectors are designed for superior uniformity and control. Reflectors are available in four distributions.
Electrical Luminaires are provided with quick-disconnect H.I.D. ballast assemblies. Porcelain sockets are provided with the reflector assembly. Installation Luminaires are designed to slip-fit a 3" O.D. x 3" tall tenon and are secured with eight set screws. The bollard is supplied with four 3/4" diameter, L-type anchor bolts. Two doors are provided in the base for anchorage and wiring access. Luminaires
and bollard roof are hinged and gasketed for lamp and reflector access. Listings UL Listed to U.S. and Canadian safety standards. Luminaires are labeled as suitable for wet locations.
Example: OL23 100M MED GCF SR2 TB1 ANBK
ORDERING INFORMATION 1
Series
Lamp type
OL23
Metal halide 50M MED 50W 70M MED 70W 100M MED 100W 150M MED 150W2
Large luminaire OL20 Mini luminaire BLCA BOL10LC Lighted bollard
ADDITIONAL INFORMATION
High pressure sodium 50S MED 50W 70S MED 70W 100S MED 100W 150S MED 150W2
4
Lens
Distribution
GCF Glass, clear flat
Large luminaire SR2 Type II SR3 Type III SR4SC Type IV SR5S Type V
Metal halide for T6 lamps3 39T6 G12 175W 70T6 G12 250W LED light3 LED1
Mini luminaire and lighted bollard R2 Type II R3 Type III R4 Type IV R5 Type V
Voltage5
Options
Finish
TB1 TB2 TB3 TB4 120 277 347
HS House side shield9 SF Single fusing DF Double fusing
ANBK Black ANDB Dark bronze DNA Natural aluminum ANWH White CM Custom match CS Custom select RAL colors
120V 208V6 240V 277V 120V7 277V8 347V
For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted. Mini Luminaire
“
“
“
“
23 dia. x 23 tall
OL23
Lighted Bollard
12 dia. x 20 tall
OL20
“
Luminaire
“
12 dia. x 47 tall w/10 dia. base “
ANTIQUE STREET LAMPS
BLCA BOL10LC
622
Notes 1 2 3 4 5 6 7 8 9
Lamp not supplied with luminaires or bollard, except for LED. 150W only available for large luminaire. Available for mini luminaire and bollard only. LED only available with symmetric distribution. No specification required. Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada). Consult factory for availability in Canada. 120 is available voltage for LED and 39T6 only. 277 is available voltage for 39T6 only. Available for SR2, SR3 and R4 luminaire distributions only.
1-800-410-8899 | www.antiquestreetlamps.com
PSG10
Intended Use The posts and arms provide a contemporary style to compliment the Oslo luminaires. Typical applications include street lighting, downtowns, parks, public areas and mall interiors. Please refer to our website at www.antiquestreetlamps.com for specifications. Construction Materials: The arm and wall bracket are cast aluminum one-piece construction. Posts are cast aluminum and
aluminum pipe, one-piece construction. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamperresistant design. Finish: The posts are finished with a premium polyester powder coating. Standard colors are black or dark bronze. Installation The arm mounts on a 3" O.D. x 4" tall tenon and is secured with set screws. The wall bracket mounting plate has four .56" diameter holes for
mounting to the wall. It is furnished with four 3/8-16 acorn nuts and washers. Wall studs are furnished by others. Both arm and wall bracket have 3" O.D. x 3" tall tenons. The post is provided with four, 3/4" diameter, L-type anchor bolts. Four doors are provided in the base for anchorage access. One door is provided at center for wiring access. At the top of the post is a 3" O.D. x 3" or 4" tall tenon for luminaire or arm mounting.
OSLO Post, Arm and Wall Bracket
Example: PX OL17 16 3T4 ANBK
ORDERING INFORMATION Series
Height
Mounting method
Finish
PX OL17 Post OLC42 Arm OLCWB Wall bracket
For post only 8 10 12 14 16
For post only 3T3 3" tenon x 3" tall 3T4 3" tenon x 3" tall
ANBK ANDB DNA ANWH CM CS
ADDITIONAL INFORMATION
Black Dark bronze Natural aluminum White Custom match Custom select RAL colors
For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted.
Post
PX OL17
www.antiquestreetlamps.com | 1-800-410-8899
OLC42
Wall bracket
OLCWB
ANTIQUE STREET LAMPS
Crossarm
PSG10
CONTEMPORARY
Poles
PRODUCT INFORMATION
623
CONTEMPORARY
Luminaires
PRODUCT INFORMATION Intended Use Luminaires are designed for applications where cut-off performance and contemporary architectural style are desired. Typical applications include street lighting, downtowns, parks, public areas and mall interiors. Shown here is a sampling of luminaires available. Please refer to our website at www.antiquestreetlamps.com for more selections and for specifications.
CONTEMPORARY LUMINAIRES
Construction Materials: Ballast housings and skirts are constructed of cast aluminum. ES22 skirt is spun aluminum. Flat and sag lens options are manufactured of clear impact-resistant tempered glass. EC13RT has a globe of clear acrylic or polycarbonate. Finish: The luminaires are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green.
Optics Anodized segmented reflectors are designed for superior uniformity and control. Reflectors are available in five distributions. Electrical Luminaires are provided with quick-disconnect H.I.D. ballast assemblies. Porcelain sockets are provided with the reflector assembly.
provided with the contemporary arms. See luminaire specifications for appropriate arm sizes. Listings UL Listed to U.S. and Canadian safety standards. Luminaires are labeled as suitable for wet locations.
Installation Luminaires are designed to mount to swivel adapters
Example: EH16RT 100M MED GCF SR2 TB1 ANBK
ORDERING INFORMATION Series
Lamp type1
EC13RT ES22ST EH16RT EM17RT EH22RT EM25RT
Metal halide (EC13, ES22, EH16, EM17 only) 50M MED 50W 70M MED 70W 100M MED 100W 150M MED 150W
ADDITIONAL INFORMATION
High pressure sodium (EC13, ES22, EH16, EM17 only) 50S MED 50W 70S MED 70W 100S MED 100W 150S MED 150W Metal halide (EM25, EH22 only) 175M MOG 175W
Lens
Distribution
Voltage4
Options
Finish
All luminaires GCF Glass, clear flat GCSG Glass, clear sag EC13RT only ACS Acrylic, clear smooth PCS Polycarbonate, clear smooth
SR2 SR3 SR4SC SR4W SR5S
TB1 TB2 TB3 TB4 347
All luminaires HS House side shield6 SF Single fusing DF Double fusing EC13RT, H16 & H22 only 1DS Decorative shield EC13RT only 2DS Two decorative shields 2DD Two decorative discs
ANBK ANDB ANDG ANPP CM CS
250M MOG 250W 400M MOG 400W2 High pressure sodium (EM25, EH22 only) 150S MOG 150W 250S MOG 250W 400S MOG 400W2
Type II Type III Type IV Type IV3 Type V
120V 208V5 240V 277V 347V
Black Dark bronze Dark green Prime painted Custom match Custom select RAL colors
For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted. Copenhagen Series
Stockholm Series
Optional Decorative Shield
EC13RT
EC13RT 1DS
Optional Decorative Shields
EC13RT 2DS
Optional Decorative Discs
ANTIQUE STREET LAMPS
Munich Series
624
EM17RT GCF
ES22ST GCF
EC13RT 2DD
ES22ST GCSG
Hanover Series
EM17RT GCSG
EH16RT GCF
EH16RT GCSG
Optional Decorative Shield EH16RT GCF 1DS
Notes
EM25RT GCF
EM25RT GCSG
EH16RT GCF
EH16RT GCSG
1 2 3 4 5 6
Lamp not supplied with luminaires. Refectors designed for ED28 lamp or E18 lamp. SR4W is only available with EM25 and EH22 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada). Consult factory for availability in Canada. Available for SR2, SR3 and SR4W only.
1-800-410-8899 | www.antiquestreetlamps.com
PSG10
Intended Use Luminaires are designed for applications where cut-off performance and contemporary architectural style are desired. Typical applications include street lighting, downtowns, parks, public areas and mall interiors. Please refer to our website at www.antiquestreetlamps.com for specifications. Construction Materials: Luminaires are cast aluminum with a spun aluminum roof. Flat lens
is manufactured of clear impact-resistant tempered glass. Bracket arms and wall brackets are cast aluminum. Finish: The luminaires are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green. Optics Anodized segmented reflectors are designed for superior uniformity and control. Reflectors are available in four distributions.
Electrical Luminaires are provided with quick-disconnect H.I.D. ballast assemblies. Porcelain sockets are provided with the reflector assembly.
Listings UL Listed to U.S. and Canadian standards. Luminaires are labeled as suitable for wet locations.
BRISTOL LUMINAIRES
Installation Post-top luminaires slip-fit a 3" O.D. x 3.5" tall tenon. Sidemount luminaire bracket arms are designed to slip fit a 3.375" O.D. x 8" tall tenon for 4" diameter post and a 4.375" O.D. x 8" tall tenon for 5" diameter post. Luminaires are secured with six set screws.
Example: BTSM 100M MED GCF SR2 TB1 SF ANBK
ORDERING INFORMATION 1
Series
Lamp type
Luminaires BT1 Post-top luminaire BT2 Post-top luminaire BT3 Post-top luminaire BTSM Side-mount luminaire Bracket arms BTA4/1 One-way 4" arm BTA4/2 Two-way 4" arms ADDITIONAL INFORMATION
CONTEMPORARY
Luminaires
PRODUCT INFORMATION
BTA4/3 Three-way 4" arms BTA5/1 One-way 5" arm BTA5/2 Two-way 5" arms BTA5/3 Three-way 5" arms BTWB Wall bracket arm
Luminaires only Metal halide 50M MED 50W 70M MED 70W 100M MED 100W 150M MED 150W
High pressure sodium 50S MED 50W 70S MED 70W 100S MED 100W 150S MED 150W
Lens
Distribution
Voltage2
Options
Finish
Luminaires only GCF Glass, clear flat
Luminaires only SR2 Type II SR3 Type III SR4SC Type IV SR5S Type V
Luminaires only TB1 120V TB2 208V3 TB3 240V TB4 277V 347 347V 480 480V
Luminaires only HS House side shield4 SF Single fusing DF Double fusing
ANBK ANDB ANDG ANPP CM CS
Black Dark bronze Dark green Prime painted Custom match Custom select RAL colors
For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
Post-top Luminaires
Side-mount Luminaires with Post-top Bracket Arms
Side-mount Luminaire with Wall Bracket
BT1
BT3
Two-way
Three-way
BTSM BTA4/1 OR BTA5/1
BTSM BTA4/2 OR BTA5/2
BTSM BTA4/3 OR BTA5/3
BTSM BTWB
Notes 1 2 3 4
PSG10
www.antiquestreetlamps.com | 1-800-410-8899
Lamps not supplied with luminaires. Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada). Consult factory for availability in Canada. Available for SR2 and SR3 only.
ANTIQUE STREET LAMPS
BT2
One-way
625
CONTEMPORARY
Crossarms and Wall Brackets
PRODUCT INFORMATION
CONTEMPORARY ARMS & WALL BRACKETS
Intended Use The contemporary arms are designed for aesthetically integrating single or multiple luminaires with posts. A matching family of wall brackets provides the ability to integrate buildingmounted luminaires with post-mounted site lighting. Typical applications include street lighting, downtowns, parks, public areas and mall interiors. Shown here is a sampling of arms available. Please
refer to our website at www.antiquestreetlamps.com for more selections and for specifications.
premium polyester powder coating. Standard colors are black, dark bronze or dark green.
Construction Materials: Arms and wall brackets are one-piece construction of cast aluminum and extruded or formed aluminum. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamperresistant design.
Arms and wall brackets are available in two sizes. The 4" diameter arms are for the small contemporary luminaires and 4" diameter posts. The 5" diameter arms are for the large contemporary luminaires and 5" diameter posts.
Finish: The arms and wall brackets are finished with a
Installation The arms are designed to slip-fit a 3.375" dia. post-top
Example: EAE5/1 PER PE1 ANBK
ORDERING INFORMATION Series/Size Series EAA EAB EAC EAE EAH EAJ EAL
Size 4/1 5/1 4/2 5/2 4WB 5WB
tenon (4" arms) or 4.375" dia. post-top tenon (5" arms) and are secured with eight socket set screws. The center finial and arm finial are removable to allow for wiring access. Wall brackets are provided with four or six 1/2" diameter holes for mounting to the wall. Wall bracket mounting hardware is not provided. Arms and wall brackets are provided with swivel adapters for luminaire mounting. Optional twist-lock photo control is installed at center spool top instead of the finial.
One-way 4" arm One-way 5" arm Two-way 4" arms Two-way 5" arms Small wall bracket Large wall bracket
ADDITIONAL INFORMATION
Options
Finish
Arms only PER NEMA twist-lock receptacle only PE1 NEMA twist-lock photocontrol, 120V, 208V, 240V PE3 NEMA twist-lock photocontrol, 347V PE4 NEMA twist-lock photocontrol, 480V PE7 NEMA twist-lock photocontrol, 277V
ANBK ANDB ANDG ANPP CM CS
Black Dark bronze Dark green Prime painted Custom match Custom select RAL colors
For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted.
ANTIQUE STREET LAMPS
One-way
626
Two-way
Wall Bracket
EAE4/1
EAE4WB
EAA4/1
EAB4/1
EAE5/2
EAC4/1
EAH4/1
EAJ4/1
EAL4/1
All arm styles are available in both 4" and 5" sizes and as one-ways, two-ways and wall brackets.
1-800-410-8899 | www.antiquestreetlamps.com
PSG10
Intended Use Eurotique® poles provide a contemporary style appearance that is perfectly suited for use with contemporary luminaires and arms. Posts are available in 10-foot to 30foot heights. Typical applications include street lighting, downtowns, parks, public areas and mall interiors.
integral anchor/base plate and two-piece base cover or one-piece cast aluminum base with interior anchor bolts. Aluminum posts are available as round straight, 4" and 5" or as round stepped, 4"/6.63" and 5"/7". Steel posts are available as round straight, 4" and 5" or as round stepped, 5"/7".
Please refer to our website at www.antiquestreetlamps.com for specifications.
Materials: Aluminum poles are manufactured of extruded aluminum, with cast aluminum anchor plate or base, base cover and handhole cover or access door. Steel posts are manu-
Construction Posts are available in either aluminum or steel, and are one-piece construction with
factured of steel tubing with steel anchor plates and cast aluminum base cover and handhole cover. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamper-resistant design.
posts are supplied with four 1" diameter, L-type anchor bolts. The 5"/7" steel posts are supplied with four 1-1/4" diameter, L-type anchor bolts. A hand-hole with cover is provided in the lower shaft for wiring access for EPAX and EPSX series posts. PXPD18 is provided with access door. Integral tenons are provided as required for mounting arms and luminaires.
Finish: The posts are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green.
CONTEMPORARY POLES
Installation The 4", 5" and 4"/6.63" posts are supplied with four 3/4" diameter, L-type anchor bolts. The 5"/7" aluminum
Example: EPSX 18 S4 3-3/8T11 ANBK
ORDERING INFORMATION Series
Height
EPAX Aluminum contemporary EPSX Steel contemporary PX PD18 Aluminum decorative (Philadelphia series)
10 12 14 16 18 20 22
ADDITIONAL INFORMATION
S4 HEIGHT (FT.) EPAX 10, 12, 14, 16, 18 EPSX 16, 18, 20 PX PD18 10, 12, 14 SERIES
CONTEMPORARY
Poles
PRODUCT INFORMATION
1,2
Shaft 24 26 28 30
S4 S4S6 S5 S5S7
Mounting method
Finish
4 posts 3-3/8T11 3-3/8T8 5 posts 4-3/8T11 4-3/8T8 All posts 0T0 3T3
ANBK ANDB ANDG ANPP CM CS
Smooth 4" Smooth 4"/6.63" Smooth 5" Smooth 5"/7"
Standard tenon Tenon for arm EAL4 Standard tenon Tenon for arm EAL5
Black Dark bronze Dark green Prime painted Custom match Custom select RAL colors
No tenon 3" x 3" tenon
For additional product information, visit www.antiquestreetlamps.com. S5S7
CONFIGURATIONS S5 S4S6 HEIGHT (FT.) HEIGHT (FT.) 16, 18, 20 20, 22 16, 18, 20 N/A 12, 14, 16, 18 N/A
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches unless otherwise noted.
S5S7 HEIGHT (FT.) 20, 22, 24, 26 22, 24, 26, 28, 30 N/A
S4S6
S4 or S5
S5
S4
EPAX OR EPSX
EPAX
EPAX OR EPSX
PX PD18
Notes
10-1/2” dia. EP Series
PSG10
11-1/2” dia. EP Series
www.antiquestreetlamps.com | 1-800-410-8899
15” dia. EP Series
16” dia. EP Series
18” dia. Philadelphia Series
1 Specify height and shaft; see configurations table. 2 Note height limitations for shaft type. Heights above 22' not available for mounting twin luminaires. Factory is available to help with loading calculations.
ANTIQUE STREET LAMPS
EPAX OR EPSX
627
RAPID-SHIP
Luminaires
PRODUCT INFORMATION Intended Use Antique Street Lamps rapidship luminaires provide a historical style appearance that is perfectly suited for use with Antique Street Lamps posts. Typical applications include street lighting, downtowns, parks, public areas and mall interiors.
RAPID-SHIP LUMINAIRES
www.antiquestreetlamps.com for more information. The specific details about program terms and conditions, order quantities and product availability are shown on our website and are updated regularly. Construction Materials: All luminaire bases and frames are cast aluminum. Round domes are spun aluminum. AJ19 globe is refractive glass. All other globes are formed from clear
Shipping: The rapid-ship program provides product shipment within 10 days of receipt of order. Please refer to our website at
S16 S18 S20 AJ19 AT20 AT23 A21
A25 P36 RGA RGR RGR2 DS4 DS7
LT30 LTS30 TR25 TR30 KW35
Bases1
Lamp type
Installation Installation: All luminaires are designed to slip-fit a 3" O.D. x 3" tall tenon and attach with set screws.
Finish: The luminaires are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green.
Listings UL Listed to U.S. and Canadian safety standards. Luminaires are labeled as suitable for wet locations.
Electrical Luminaires are provided with
A AU D E W
Metal halide 70M MED 70W 100M MED 100W 150M MED 150W 250M MED 250W2
Lens
Distribution All luminaires except those named below (blank) Symmetrical distribution GR5 Glass refractor type V GR3 Glass refractor type III RGA, RGR, RGR2 and AJ19 R5 Refractive globe type V R3 Refractive globe type III ADDITIONAL INFORMATION
quick-disconnect H.I.D. ballast and socket assemblies.
Example: A25 AU 100M MED ACT GR5 TB1 PER PE1 ANBK RSP
ORDERING INFORMATION Series
acrylic or polycarbonate and are either smooth, textured or refractive. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamperresistant design.
DS4 and DS7 only SR5S Reflector type V
High pressure sodium 100S MED 100W3 150S MED 150W3 100S MOG 100W 150S MOG 150W
All luminaires except those named below ACT Acrylic, clear textured S16, S18 and S20 only AWS Acrylic white smooth P36 only PCT Polycarbonate clear textured
Voltage4
Options
TB1 TB2 TB3 TB4 347
FPF FSF PER PE1 PE3 PE4 PE7 ARV MD11 BL21
120V 208V5 240V 277V 347V
RGA, RGR and RGR2 only ARF Acrylic refractive DS4 and DS7 only (blank) Acrylic refractive
Finial for AT, A, RGA or RGR only Finial for RGA or RGR only Twist-lock photocontrol receptacle6 NEMA twist-lock PE 120, 208, 240V6 NEMA twist-lock PE 347V6 NEMA twist-lock PE 480V6 NEMA twist-lock PE 277V6 Cage for RGA, RGR or RGR2 only
KW35 only ACS Acrylic clear smooth AJ19 only GRF Glass refractive
Finish
Rapid-ship program
ANBK Black ANDB Dark bronze ANDG Dark green
RSP
For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted. Luminaires with E Series Base Acorn Globes
Sphere Globes
S16 E
S18 E
S20 E
AJ19 E
AT20 E
Refractive Globes
AT23 E
A2 1 E
Octagonal
AT25 E
P36 E
Square
Luminaire Base Styles
ANTIQUE STREET LAMPS
All luminaires except TR25, TR30 and KW35GRS are shown with the E Series base. Replace the E base with A, AU, D or W base for more luminaire choices. Base AU is available with optional twist-lock photocontrol.
628
RGA E
RGR E
RGR2 E
(Shown with optional ARV MD11 BL21 cage and finial)
RGA E FPF
RGR E FPF
RGR2 E FSF
LT30 E
LTS30 E
TR25
Hexagonal
KW35 GR5
TR30 Cutoff Optics
DS4 E
E
D
A
W
AU
Notes
DS7 E
1 Bases not available with TR25, TR30 or KW35. 2 250M only available with S20, AJ19, AT23, A25, P36, RGA, RGR and RGR2 in conjunction with bases A, W or AU. Lamp not supplied with luminaires. 3 Available only with AT20, A21, DS4, DS7, TR25. 4 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada). 5 Consult factory for availability in Canada. 6 Optional photocontrols only available with the AU luminaire base.
1-800-410-8899 | www.antiquestreetlamps.com
PSG10
Intended Use Antique Street Lamps rapid-ship posts provide a historical style appearance that is perfectly suited for use with Antique Street Lamps luminaires. Posts are available in 10-foot to 16-foot heights. Typical applications include street lighting, downtowns, parks, public areas and mall interiors.
receipt of order. Please refer to our website at www.antiquestreetlamps.com for more information. The specific details about program terms and conditions, order quantities and product availability are shown on our website and are updated regularly.
integrity. An integral 3" O.D. x 3" tall tenon is provided for luminaire mounting. Materials: The post bases are cast aluminum or cast iron. Aluminum posts have 4" or 5" diameter fluted or 4" diameter smooth extruded aluminum, or cast tapered fluted shafts. Cast iron posts have cast tapered fluted shafts. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamperresistant design.
Construction All posts are fabricated as one-piece construction. The shafts are telescoped into the bases and double-welded for maximum structural
Shipping: The rapid-ship program provides product shipment within 10 days of
Finish: The posts are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green.
RAPID-SHIP POSTS
Installation Posts are provided with four, hot-dip galvanized, 3/4" L-type anchor bolts. A door is provided in the base for anchorage and wiring access. A grounding screw is provided inside the base, accessible from the door.
Example: PX CH16 14 F5 3T3 ANBK RSP
ORDERING INFORMATION Size1
Series PX Cast aluminum post with extruded shafts PA Cast aluminum post PI Cast iron post
ADDITIONAL INFORMATION
SERIES PX PA PA PI PI 1 ! *$&&+ * +
KW12 S92 S13 H10 W17
2
NY17 MO122 CH12 CH16 C20
Height1
Shaft
Mounting method
Finish
Rapid-ship program
8 9 10 11 12 13 14 163
PX only F4 Fluted 4" 3 S4 Smooth 4" 3 F5 Fluted 5" PA and PI only (blank) Tapered fluted
3T3 3" O.D. x 3" tall tenon (standard)
ANBK Black ANDB Dark bronze ANDG Dark green
RSP
For additional product information, visit www.antiquestreetlamps.com.
CONFIGURATIONS SIZE KW12, S9, S13, H10, W17, NY17, MO12, CH12, CH16 W17 NY17 NY17 C20 1 ! 0,+ * +
RAPID-SHIP
Posts
PRODUCT INFORMATION
1 ! 0,+ * +
1 ! 0,+ * +
1 ! *$&&+ * +
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
HEIGHT (FT.) 10, 12, 14, 16 8, 10, 12 9, 11, 13 10, 13 10, 12 1 ! 0,+ * +
1 ! 0,+ * +
*+ + ' ) 0,+ * +
*+ + ' ) 0,+ * +
*+ + ' ) 0,+ * +
*+ + ' ) 0,+ * +
1 Specify size and height, see Configurations table. 2 KW12, S9 and MO12 series posts only available with F4 or S4 shaft. 1 *( 1 *( 1 ! 1 ! 1 ! 1 ! 1 ! 3 F4 and S4 shafts are not available 1 ! 1 ! 1 ! 1 ! in 16' height. - &)" )! * '!+ # )! * * !% +&% )! * - &)" )! * / *+ )! * ,** . )! * ,** . )! * )+ &) )! * &%+) # )! * ! & )! * ! & )! *
ANTIQUE STREET LAMPS
PSG10
629
www.antiquestreetlamps.com | 1-800-410-8899
Notes
RAPID-SHIP
Wall Brackets
PRODUCT INFORMATION
RAPID-SHIP WALL BRACKETS
Intended Use Antique Street Lamps rapidship wall brackets provide a historical style appearance that is perfectly suited to match Antique Street Lamps light posts. Typical applications include street lighting, downtowns, parks, public areas and mall interiors.
Shipping: The rapid-ship program provides product shipment within 10 days of receipt of order. Please refer to our website at www.antiquestreetlamps.com for specific details about program terms and conditions, order quantities and product availability.
Construction Wall brackets are fabricated as one-piece construction. Materials: Wall brackets are cast aluminum with an aluminum mounting plate. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamper-resistant design.
Installation Wall brackets have four 9/16" diameter holes for mounting to the wall. Hardware furnished by others.
Example: PCPWB ANBK RSP
ORDERING INFORMATION Series
Finish
Rapid-ship program
PCPWB ACAWB
ANBK Black ANDB Dark bronze ANDG Dark green
RSP
ADDITIONAL INFORMATION
Finish: The wall brackets are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green.
For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
PCPWB
ACAWB
Bollards
PRODUCT INFORMATION Intended Use Antique Street Lamps rapid-ship bollards provide a historical style appearance that is perfectly suited to match Antique Street Lamps light posts. Typical applications include street lighting, downtowns, parks, public areas and mall interiors.
RAPID-SHIP BOLLARDS
Shipping: The rapid-ship program provides product shipment within 10 days of receipt of order. Please refer to our website at www.antiquestreetlamps.com for specific details about program terms and conditions, order quantities and product availability.
Construction All bollards are fabricated as one-piece construction. Materials: Bollards have shafts of 5" diameter fluted extruded aluminum with cast aluminum bases and tops. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamper-resistant design.
Series
Finish
Rapid-ship program
BCA Cast aluminum bollards
BCH12DT BCH12BT BNY17DT BNY17BT
ANBK Black ANDB Dark bronze ANDG Dark green
RSP
For additional product information, visit www.antiquestreetlamps.com.
ANTIQUE STREET LAMPS
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
630
Installation Bollards are provided with four, hot-dip galvanized, 3/4" L-type anchor bolts. A door is provided in the base for anchorage access.
Example: BCA BCH12DT ANBK RSP
ORDERING INFORMATION Family
ADDITIONAL INFORMATION
Finish: Bollards are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green.
Dome Top
Ball Top
Dome Top
BCA BCH12BT
BCA BCH17DT
12� dia. BCA BCH12DT Chicago Series
Ball Top
17� dia. BCA BCH17BT New York Series
1-800-410-8899 | www.antiquestreetlamps.com
PSG10
Intended Use Antique Street Lamps rapidship lighting assemblies provide a contemporary styling with full-cutoff, high- performance optics. Two size assemblies available in 16-, 18- and 20-foot heights with single or twin arm options. Typical applications include street lighting, downtowns, parks, public areas and mall interiors. Shipping: The rapid-ship program provides product shipment within 10 days of
receipt of order. Please refer to our website at www.antiquestreetlamps.com for more information. Construction Materials: Posts are steel construction with a 4" or 5" shaft and an aluminum two-piece base cover. Arms are one-piece aluminum and cast aluminum construction. Luminaires are cast aluminum with a clear glass flat lens. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamper-resistant design.
Finish: The posts are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green.
anchor bolts and a handhole with cover for wiring access. Arms slip-fit the post tenon and are secured with eight socket set screws. Luminaires mount securely to the arm plumb device and are provided with a hinged and gasketed lens ring with captive screw for easy lamp access.
Optics Luminaires utilize highperformance reflectors in type 3 distribution. Electrical Luminaires are provided with quick-disconnect H.I.D. ballast and socket assemblies. Installation Posts are provided with four, hot-dip galvanized, 3/4" L-type
RAPID-SHIP CONTEMPORARY LIGHTING POST ASSEMBLIES
Listings UL Listed to U.S. and Canadian safety standards. Luminaires are labeled as suitable for wet locations.
Example: EPSX 16 S4 3-3/8T8 EAL4/1 PER PE1 EM17FT 100M MED GCF SR3 TB1 ANBK RSP
ORDERING INFORMATION Series
Height
Shaft
Mounting method
Arms
Options
Luminaires
Lamp type1
EPSX
16 18 20
Small assembly S4 Large assembly S5
Small assembly 3-3/8T8 Tenon size Large assembly 4-3/8T8 Tenon size
Small assembly EAL4/1 EAL4/2 Large assembly EAL5/1 EAL5/2
Arm options PER Twist-lock photocontrol receptacle PE1 NEMA twist-lock PE 120, 208, 240V PE3 NEMA twist-lock PE 347V PE4 NEMA twist-lock PE 480V PE7 NEMA twist-lock PE 277V
Small assembly EM17RT EM17ST EM17FT Large assembly EM25RT EM25ST EM25FT
Metal halide (small assembly only) 50M MED 50W 70M MED 70W 100M MED 100W 150M MED 150W
Lamp type1 (continued) High pressure sodium (small assembly only) 50S MED 50W 70S MED 70W 100S MED 100W 150S MED 150W Metal halide (large assembly only) 175M MOG 175W ADDITIONAL INFORMATION
RAPID-SHIP
Assemblies
PRODUCT INFORMATION
250M MOG 250W 400M MOG 400W2 High pressure sodium (large assembly only) 150S MOG 150W
Lens
Distribution
Voltage3
Finish
Rapid-ship program
GCF Glass, clear flat
SR3 Type III
TB1 TB2 TB3 TB4 347
ANBK Black ANDB Dark bronze ANDG Dark green
RSP
120V 208V4 240V 277V 347V
For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
EAL5/1
Posts
Arms
Luminaires
EM25FT Ringed Top
Smooth Top
Fluted Top
EM17RT
EM17ST
EM17FT
EAL4/1
Small EM17FT EAL4/2
EM25RT
EM25ST
EM25FT
EAL5/2
S5 5" dia. Smooth Shaft
S4 4" dia. Smooth Shaft
Notes EPSX
PSG10
www.antiquestreetlamps.com | 1-800-410-8899
EPSX
1 2 3 4
Lamp not supplied with luminaires. Reflectors designed for ED28 lamp. Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada). Consult factory for availability in Canada.
ANTIQUE STREET LAMPS
Large
631
HISTORICAL
Luminaires
PRODUCT INFORMATION Intended Use Antique Street Lamps luminaires provide a historical style appearance that is perfectly suited for use with Antique Street Lamps posts. Typical applications include street lighting, downtowns, parks, public areas and mall interiors. Shown here is a sampling of luminaires available. Please refer to our website at www.antiquestreetlamps.com for more selections and for specifications.
HISTORICAL LUMINAIRES
Construction Materials: All luminaire bases and frames are manufactured from heavy-wall, low-copper, cast aluminum. Round domes are spun aluminum or cast aluminum. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamperresistant design.
Optics Globes are formed from clear acrylic or polycarbonate and are either smooth, textured or refractive. DS series luminaires with cutoff optics utilize anodized segmented reflectors available in four distributions. Optional glass refractors in type V or III distributions are available.
Finish: The luminaires are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green.
Electrical Luminaires are provided with quick-disconnect H.I.D. ballast and socket assemblies.
Series
Base Lamp type RGT RGA RGR RGC DS4 DS7 DS8 DS10
Not available with base TR30 KW35 FM44 G36 DS3 DS2 BH27
CM28P32 A VG31C33 AU HLT30 D E K W
DS10 only TY5 Reflector type V VLR5, CM28 and VG31 only VLR5 Vertical lamp reflector type V VLR3 Vertical lamp reflector type III CM28 and VG31 only HLR Horizontal reflector type III ADDITIONAL INFORMATION
TB1 TB2 TB3 TB4 347
Lens
Metal halide 70M MED 70W 100M MED 100W 150M MED 150W 250M MOG 250W1
Voltage4
Distribution (continued)
High pressure sodium 70S MED 70W 100S MED 100W2 100S MOG 100W3 150S MED 150W2 150S MOG 150W3 250S MOG 250W1
Distribution
All luminaires except those named below ACT Acrylic clear textured P36 only PCT Polycarbonate clear textured BH27, CM28, VG31 and all RGs only ACS Acrylic clear smooth
DS4, DS8 and DS7 only (blank) Acrylic refractive G36, KW35, DS3 and DS2 only ARF Acrylic refractive
Options
120V 208V5 240V 277V 347V
FPF PEB1 PEB2 PER PE1
All luminaires except those named below GR5 Glass refractor type V GR3 Glass refractor type III All RGs only R5 Refractive globe type V R3 Refractive globe type III
Finial for AT, A and all RGs only Photoelectric cell button 120V Photoelectric cell button 208, 240, 277V Twist-lock photocontrol receptacle6 NEMA twist-lock PE 120, 208, 240V6
PE3 PE4 PE7
NEMA twist-lock PE 347V NEMA twist-lock PE 480V6 NEMA twist-lock PE 277V6
ANBK ANDB ANDG ANPP CM CS
Acorn Globes
Pendant/Roadway Luminaires
Acorn Globes with Frames
P36 E
TL26 A
ANTIQUE STREET LAMPS
Round
Cutoff Optics (DS) Octagonal
Square
Hexagonal
Refractive Globes
Round
TR30
LT30 D
Refractive Globes
632
Black Dark bronze Dark green Prime painted Custom match Custom select RAL colors
For additional product information, visit www.antiquestreetlamps.com.
Post-top Luminaires
A25 W
DS2-DS8 only SR2 Reflector type II SR3 Reflector type III SR4SC Reflector type IV SR5S Reflector type V
Finish 6
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
AT23 E
Listings UL Listed to U.S. and Canadian safety standards. Luminaires are labeled as suitable for wet locations.
Example: A25 AU 100M MED ACT GR5 TB1 PER PE1 ANBK
ORDERING INFORMATION
Available with base AT23 A25 P36 TL26 LT30
Installation All post-top luminaires are designed to slip-fit a 3" O.D. x 3" tall tenon and are secured with set screws. All pendant/roadway luminaires are designed to mount to the roadway arms plumbing device.
DS4 K G36
Octagonal
DS7 K Round
BH27
CM28P32
Round
Hexagonal
VG31C33
HLT30
DS8 K Hexagonal
Notes
RGT A
RGA E FPF
RGR AU FPF
RGC D FPF
KW35
FM44
Luminaire Base Styles
E
D
K
A
W
AU
Most luminaires above use base selections. Replace bases shown in iluustrations with any above. Base AU is available with optional twist-lock photocontrol.
DS10K
DS3
DS2
1 250W only available with AT23, A25, P36, TL26, LT30, and all RGs in conjunction with bases A, W or AU and all pendant luminaires. Lamp not supplied with luminaires. 2 Available only with DS luminaires. 3 Not available with DS luminaires. 4 Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada). 5 Consult factory for availability in Canada. 6 Optional photocontrols only available with the AU luminaire base.
1-800-410-8899 | www.antiquestreetlamps.com
PSG10
Intended Use Antique Street Lamps arms provide a historical style appearance that is perfectly suited for use with Antique Street Lamps luminaires and posts. Typical applications include street lighting, downtowns, parks, public areas and mall interiors. Shown here is a sampling of arms available. Please refer to our website at www.antiquestreetlamps.com for more selections and for specifications. Arms may also
be available as four-ways, three-ways, two-ways, oneways and as wall brackets. See website for availablity. Construction All arms are fabricated as one-piece construction. Integral 3" O.D. x 3" tall tenons are provided for posttop luminaire mounting. A plumbing device is provided for mounting and leveling the pendant luminaires. Materials: The arms are cast aluminum and extruded
aluminum. Removable cast finials are provided at the center for wiring access. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamper-resistant design.
screws. Appropriate tenon sizes vary for each arm. See sizes below.
HISTORICAL ARMS
HISTORICAL
Arms
PRODUCT INFORMATION
Finish: The arms are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green. Installation Arms slip-fit a post tenon and are secured with socket set
Example: CCA24 ANBK
ORDERING INFORMATION Series
Finish
For post top luminaires CCA24 ACA30 ASC30 PCP36 RT39 LB33 WTA28 ADDITIONAL INFORMATION
For pendant luminaires ELC27/1 WLC72/1 GAC48/1 CVC27/1
ANBK ANDB ANDG ANPP CM CS
Black Dark bronze Dark green Prime painted Custom match Custom select RAL colors
For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted. Post-top Arms for Post-top Luminaires
CCA24 3” O.D. x 3” tall tenon
RT39 4” O.D. x 6.25” tall tenon
ACA30 3” O.D. x 5” tall tenon
ASC30 3” O.D. x 4” tall tenon
LB33 3” O.D. x 6” tall tenon
PCP36 3” O.D. x 5” tall tenon
WTA28 3” O.D. x 9” tall tenon
Post-top Roadway Arms for Pendant Luminaires
PSG10
WLC72/1 3” O.D. x 9” tall tenon
www.antiquestreetlamps.com | 1-800-410-8899
GAC48/1 3” O.D. x 12” tall tenon
CV27/1 3” O.D. x 12” tall tenon
ANTIQUE STREET LAMPS
ELC27/1 3” O.D. x 9” tall tenon
633
HISTORICAL
Posts
PRODUCT INFORMATION Intended Use Antique Street Lamps posts provide a historical style appearance that is perfectly suited for use with Antique Street Lamps luminaires. Posts are available in aluminum, cast iron, and cast iron and steel in 8-foot to 23-foot heights. Typical applications include street lighting, downtowns, parks, public areas and mall interiors.
HISTORICAL POSTS
refer to our website at www.antiquestreetlamps.com for more selections and for specifications.
Materials: The post bases are cast aluminum or cast iron. Aluminum posts have 4" or 5" diameter fluted or smooth extruded aluminum, or cast tapered fluted shafts. Cast iron posts have cast tapered fluted shafts. Cast iron and steel posts have tapered and fluted steel shafts. Hardware and fasteners are stainless steel material. Standard exterior hardware is of a tamper-resistant design.
Construction All posts are fabricated as one-piece construction. An integral 3" O.D. x 3" tall tenon is provided for standard luminaire mounting. Arms may use different size tenons. See arm specifications for appropriate sizes.
Shown here is a sampling of posts available. Please
1,2
Series
Size
PX Cast aluminum post with extruded shafts PI Cast iron post PZ Cast iron and steel post
W17 NY17 CH12 C20 PD18
ADDITIONAL INFORMATION
Height KW20 H16 FW18 C24 NY20
6 7 8 10 12
2
13 14 15 163 17
18 20 21 22 23
Shaft
Mounting method
PX only F4 Fluted 4" 3 S4 Smooth 4" 3 F5 Fluted 5" S5 Smooth 5" PI and PZ only (blank) Tapered fluted
3T3 3T4 3T5 3T6 3T9 3T12 4T6-1/4
CONFIGURATIONS SIZE CH12, W17, NY17, PD18, KW20 H16 FW18 C20 C24 NY20
HEIGHT (FT.) 8, 10, 12, 14, 16 10, 12, 14 6, 7, 10, 12, 13, 15 10, 12, 13, 15 12, 13, 15, 17, 20, 22 13, 14, 16, 18, 21, 23
ANTIQUE STREET LAMPS 634
Finish
3" O.D. x 3" tall tenon (standard) 3" O.D. x 4" tall tenon 3" O.D. x 5"tall tenon 3" O.D. x 6" tall tenon 3" O.D. x 9" tall tenon 3" O.D. x 12" tall tenon 4" O.D. x 6-1/4" tall tenon
ANBK ANDB ANDG ANPP CM CS
Black Dark bronze Dark green Prime painted Custom match Custom select RAL colors
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted.
)* (%$ $ * "
)* (%$ $ * "
/ .+* ) *
/ .+* ) *
/ .+* ) *
/ )#%%* ) *
/ )#%%* ) *
/
4
For additional product information, visit www.antiquestreetlamps.com.
)* "+# $+#
% ( )
Installation Posts are provided with four, hot-dip galvanized, 3/4" L-type anchor bolts. A door is provided in the base for anchorage and wiring access. A grounding screw is provided inside the base, accessible through the door.
Example: PX CH12 14 F4 3T3 ANBK
ORDERING INFORMATION
SERIES PX PI PI PI PZ PZ
Finish: The posts are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green.
/ / / / ) $ *%$ , %(! " "& - )* ( ) ( ) ( ) ( )
/ (* %( ( )
/ )' %(* %(* ( )
/
/
& * " ( )
& * " ( )
/ , %(! ( )
Notes 1 2 3 4
Specify size and height, see configuration table. Factory is available to help with loading calculations. F4 and S4 shafts are not available in 16' height. Check luminaire or arm specifications for proper tenon size.
1-800-410-8899 | www.antiquestreetlamps.com
PSG10
Intended Use All bollards are fabricated as one-piece construction with removable top for optical access where applicable.
Standard exterior hardware is of a tamper-resistant design. Finish: The bollards are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green.
Materials: Bollards are cast aluminum or cast iron. Aluminum bollards have shafts of 5" diameter fluted extruded or cast fluted aluminum with cast bases and tops. Cast iron bollards are all cast. Hardware and fasteners are stainless steel material.
Optics Lenses are white smooth glass inside the extruded aluminum shafts or acrylic with choice of clear or white in top-mounted optics. Lumi-
naires provide a symmetrical distribution. Optional glass reflectors with type V or III distributions are available with bollards with topmounted optics.
L-type anchor bolts. A door is provided in the base for anchorage and wiring access. A grounding screw is provided inside the base, accessible through the door.
Electrical Luminaires are provided with quick-disconnect H.I.D. ballast and socket assemblies.
Listings UL Listed to U.S. and Canadian safety standards. Luminaires are labeled as suitable for wet locations.
Installation Bollards are provided with four, hot-dip galvanized, 3/4"
Example: BLCA BH10DTL 100M MED ACS GR5 TB1 EBB ANBK
ORDERING INFORMATION Series BLCA BLCI BCA BCI
HISTORICAL BOLLARDS
HISTORICAL
Bollards
PRODUCT INFORMATION
Lamp type1
Size Cast aluminum lighted bollards Cast iron lighted bollards Cast aluminum bollards Cast iron bollards
BLCA only BW14DTL BCH12DTL BNY17DTL BH10L BC13L
BLCI only BC13L BNY20L BCA only BW14DT BCH12DT
Distribution3 (blank) Std. low brightness reflector type V GR3 Glass refractor type III GRS Glass refractor type V
ADDITIONAL INFORMATION
BNY17DT BH10 BC13 BCI only BC13 BNY20
Lens
BLCA and BLCI only Metal halide 50M MED 50W 70M MED 70W 100M MED 100W
High pressure sodium 50S MED 50W 70S MED 70W 100S MOG 100W
Shaft-mounted optics2 GWS Glass, white smooth Top-mounted optics3 ACS Acrylic, clear smooth AWS Acrylic, white smooth
Voltage4
Options
Finish
BLCA and BLCI only TB1 120V TB2 208V5 TB3 240V TB4 277V 347 347V
EBB One eyebolt 2EBB Two eyebolts
ANBK ANDB ANDG ANPP CM CS
Black Dark bronze Dark green Prime painted Custom match Custom select RAL colors
For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted. Cast Aluminum
Cast Aluminum
Cast Aluminum
Lighted with Shaft-mounted Optics
12” dia. BCA BW14DT BLCA BW14DTL Washington Series
Lighted with Shaft-mounted Optics
12” dia. BCA BCH12DT BLCA BCH12DTL Chicago Series
Cast Iron or Cast Aluminum
Cast Aluminum
Lighted with Shaft-mounted Optics
17” dia. BCA BNY17DT BLCA BNY17DTL New York Series
10” dia. BCA BH10 BLCA BH10L Hartford Series
Cast Iron
Lighted with Topt-mounted Optics
Notes 13” dia. BCI BC13 BCA BC13
BLCI BC13L BLCA BC13L Capital Series
PSG10
20” dia. BCI BNY20
BLCI BNY20L New York Series
www.antiquestreetlamps.com | 1-800-410-8899
1 2 3 4 5
Lamp not supplied with bollards. BW14DTL, BCH12DTL and BNY17DTL only. BH10L, BC13L and BNY20L only. Multi-tap ballast (120, 208, 240, 277V), (120, 277, 347V in Canada). Consult factory for availability in Canada.
ANTIQUE STREET LAMPS
Lighted with Topt-mounted Optics
635
SIGNAGE
Banner Arms
PRODUCT INFORMATION Intended Use Antique Street Lamps banner arms allow the ability to add banners to Antique Street Lamps light posts. Typical applications include street lighting, downtowns, parks, public areas and mall interiors.
SIGNAGE Banner Arms
Shown here is a sampling of banner arms available. Please refer to our website at www.antiquestreetlamps.com for more selections and for specifications.
Construction Materials: The banner arms are extruded aluminum. Removable cast finials are provided at the end for banner placement. Bottom eyebolts are recommended because of the wind load of the banner. Finish: The banner arms are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green.
Example: BAC19 BACD4 24H4 EBC19 EBCD4 ANBK
ORDERING INFORMATION Clamp diameter1
Series Bolt-on BAB 1 banner arm 2BAB 2 banner arms 3BAB 3 banner arms 4BAB 4 banner arms One set clamp-on BAC19 1 arm BAC28 2 @ 180°
BAC29
2@ 90°
Two sets clamp-on 2BAC19 1 arm 2BAC28 2 @ 180° 2BAC29 2 @ 90°
ADDITIONAL INFORMATION
Installation Banner arms have the option of either a plate to bolt on to the post mounting pad, or a clamp to clamp around the post.
BACD3 BACD3-1/2 BACD4 BACD4-1/2 BACD5
3" Ø 3.5" Ø 4" Ø 4.5" Ø 5" Ø
BACD5-1/2 BACD6 BACD6-1/2 BACD7 BACD7-1/2 BACDTBS
5.5" Ø 6" Ø 6.5" Ø 7" Ø 7.5" Ø Ø to be specified
Arms
Eyebolts
12H4 1"Ø, 12" long 18H4 1"Ø, 18" long 24H4 1"Ø, 24" long 30H4 1"Ø, 30" long 36H4 1"Ø, 36" long
Bolt-on EBB 1 eyebolt 2EBB 2 eyebolts 3EBB 3 eyebolts 4EBB 4 eyebolts One set clamp-on EBC19 1 eyebolt EBC28 2 @ 180° EBC29 2 @ 90°
Eyebolt clamp diameter1 Two sets clamp-on 2EBC19 1 eyebolt 2EBC28 2 @ 180° 3EBC29 2 @ 90°
EBCD3 EBCD3-1/2
3" Ø 3.5" Ø EBCD4 4" Ø EBCD4-1/2 4.5" Ø EBCD5 5" Ø EBCD5-1/2 5.5" Ø
EBCD6 EBCD6-1/2 EBCD7 EBCD7-1/2 EBCDTB S
Finish 6" Ø 6.5" Ø 7" Ø 7.5 " Ø Ø to be specified
ANBK Black ANDB Dark bronze ANDG Dark green ANPP Prime painted CM Custom match CS Custom select RAL colors
For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted. Banner Arms
BAB Bolt-on Mounting
ANTIQUE STREET LAMPS
Sample Banner Mounting (banner by others)
636
Eyebolt EBB Bolt-on Mounting
Notes 1 For clamp-ons only.
1-800-410-8899 | www.antiquestreetlamps.com
PSG10
Intended Use Antique Street Lamps sign frames and banner arms allow the ability to add signs and banners to Antique Street Lamps light posts. Typical applications include street lighting, downtowns, parks, public areas and mall interiors.
for more selections and for specifications.
Shown here is a sampling of sign frames and banner arms available. Please refer to our website at www.antiquestreetlamps.com
Finish: The sign frames are finished with a premium polyester powder coating. Standard colors are black, dark bronze or dark green.
Construction Material: Sign frames are one-piece cast aluminum with a solid backing and a 1" wide border. Hardware and fasteners are stainless steel material.
Installation Street sign frames have the option of bolt-on, clamp-on or post-top mounting. Traffic sign frames have the option of clamp-on or post-top mounting. The post-top version mounts on a 3" x 3" O.D. tenon and is secured with six socket set screws. Bolt-on mountings will need an orientation drawing for the post. Contact the factory for details.
SIGNAGE Sign Frames
Example: STR3612C STCD4 ANBK
ORDERING INFORMATION Series
Clamp diameter
Bolt-on mounting street signs SS1B 1 sign frame 2SS1B 2 sign frame Clamp-on mounting street signs SS1C19 1 sign frame SS1C29 2 sign frames @ 90°
Post-top mounting street signs SSIP 1 sign frame SSIP29 2 sign frames @ 90° Clamp-on mounting traffic signs STO30C Frame for 30" octagonal sign STR3612C Frame for 36" x 12" rectangular sign STR1824C Frame for 18" x 24" rectangular sign
ADDITIONAL INFORMATION
SIGNAGE
Street Signs
PRODUCT INFORMATION
Post top mounting traffic signs STO30P Frame for 30" octagonal sign STR3612P Frame for 36" x 12" rectangular sign STR1824P Frame for 18" x 24" rectangular sign
Street signs SSCD3 SSCD3-1/2 SSCD4 SSCD4-1/2 SSCD5
1
3" Ø 3.5" Ø 4" Ø 4.5" Ø 5" Ø
Finish SSCD5-1/2 SSCD6 SSCD6-1/2 SSCD7 SSCD7-1/2 SSCDTBS
5.5" Ø 6" Ø 6.5" Ø 7" Ø 7.5" Ø Ø to be specified
Traffic signs STCD3-1/2 3.5" Ø STCD4 4" Ø STCD3 3" Ø STCD4-1/2 4.5" Ø STCD5 5" Ø STCD5-1/2 5.5" Ø STCD6 6" Ø
STCD6-1/2 STCD7 STCD7-1/2 STCDTBS
6.5" Ø 7" Ø 7.5" Ø Ø to be specified
ANBK ANDB ANDG ANPP CM CS
Black Dark bronze Dark green Prime painted Custom match Custom select RAL colors
For additional product information, visit www.antiquestreetlamps.com.
Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions (if provided) are shown in inches (centimeters) unless otherwise noted. Street Signs
Traffic Signs
Frame for 30” x 6” Oval Sign Frame for 30” Octagonal Sign SS1B Bolt-on Mounting Clamp-on Mounting
ST030C
STR3612C Frame for 36” x 12” Rectangular Sign with Clamp-on Mounting
SS1C19 Clamp-on Mounting
ST030P
STR1824C Frame for 18” x 24” Rectangular Sign with Clamp-on Mounting
Notes 1 For clamp-ons only.
PSG10
www.antiquestreetlamps.com | 1-800-410-8899
ANTIQUE STREET LAMPS
Post Top Mounting SS1P Post Top Mounting
637