Hydrel Lighting Catalog by Alcon Lighting

CONTENTS IN-GRADE Flow-Through In-Grade................................................ 640-644 Accessories..................................................................645, 652 Sealed In-Grade ................................................... 646-651, 653 Wet-Dry In-Grade.................................................................654 Technical Information...........................................................655 Well Lights................................................................... 656-659 FLOOD Floodlighting.........................................660-663, 665-667, 671 Accessories..................................................................664, 668 Linear Floodlighting ..................................................... 672-674 MOUNTING ACCESSORIES .....................669-670, 675-677 LANDSCAPE LIGHTING Accent Lighting ............................................................ 678-685 STEP & BORDER Step Lights................................................................... 686-688 Border Lights ............................................................... 689-692 BOLLARDS ................................................................ 693-694 AREA & WALL MOUNTED Pole Mounted.......................................................................695 Building Mounted ........................................................ 696-698 Site & Area Lighting.............................................................699 UNDERWATER Fountain & ReямВecting Pool Fixtures ............................. 700-704 Swimming Pool Fixtures ......................................................705 Accessories.................................................................. 706-707

HYDREL 639

IN-GRADE

Flow-Through In-Grade

PRODUCT INFORMATION Intended Use The M9400 Series modular in-grade lights are multipurpose units designed for flush mounting in a variety of substrates or materials. The M9400 fixtures are used to uplight architectural and landscape features.

M9400

and single fastener. Electrical connection to lamp module is done through submersible connector with gold-plated contacts. Lamp included. Rough-in section: Injection- molded polymer with integral junction box for branch wiring (25 cubic inches/410ccm), U.V. stabilized, impact- and corrosion-resistant for use in all types of environments. Houses power module, lamp modules and finishing components. Adjustment ring provides 360° aim rotation with keyed section to receive lamp module. Ring locks into position with stainless steel

Construction Door material: Cast aluminum, cast bronze or stainless steel. Round or square with two stainless steel captive fasteners that lock the lamp module into the rough-in section. Lamp module: Stainless steel, sealed and purged of all moisture with silicone gaskets, stainless steel clamp band

M9410 M9420 M9430 M9440

Round single lens Round double lens Square single lens Square double lens

Conduit entry 12B 12S 34B 34S

Material

Lamp type

Electrical entries/junction box: bottom or side entries available. Box suitable for through-branch wiring. Splicing volume is 25 cubic inches (410 ccm). Listings U.L., C.U.L., IP68, CE, NEMKO.

Electrical Power module: Ballast is encapsulated in a customdesigned heat-dissipating

A B SS

Low voltage2 M35 M50 M75 P3650ILV P3675ILV Incandescent3 P1675I P2050I

Aluminum Bronze Stainless steel

Voltage Distribution5 P3075I 100Q Fluorescent6 18TRT 26TRT 32TRT Ceramic metal halide 35CMT47, 18 35CMT67

70CMT47, 18 70CMT67 P2035CM P3035CM P3070CM

122 120 208 240 277 347 MVOLT4

VNSP Very narrow spot NSP Narrow spot SP Spot MFL Medium flood NFL Narrow flood

Options

1/2" NPT bottom 1/2" NPT side 3/4" NPT bottom19 3/4" NPT side

Double lens: Includes 360° Aim-Lock™ module support ring, door assembly, tilt ring, and module indexing segment providing maintenance and relamping without re-aiming. The lamp module is suspended below the door lens in a surface-adjustable, 15° tilt mechanism. The insulating air layer reduces surface temperatures. The lenses are clear tempered flat glass.

epoxy resin to eliminate all moisture intrusion to the ballast. Provided with submersible rated cord/ connector for connection to integral junction box and lamp module. HID ballasts are magnetic.

Example: M9420 B 70CMT6 MVOLT NSP FLC 34B ISS RG GEB LP

ORDERING INFORMATION Series

fasteners. RIS has a cylinder/ vault configuration.

Internal accessories10 IHL Honeycomb louver ISS Source shield8 LSF Linear spread filter CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red WWL Wall wash louver9

ADDITIONAL INFORMATION

External accessories10 GS Glare shield LC Lexan cover RG Rock guard11 Trims10 BTR Bronze round BTS Bronze square STR Stainless round STS Stainless square

Fusing SF DF Ballasts14 GEB MLEBAD

Lens FL WFL VWFL WWD ASY

Flood Wide flood Very wide flood Wall wash distribution Asymmetrical

Lamped

Finish17

LP Lamp installed

BL BZ DDB DNA GN GR SND

Single fuse12 Double fuse13 Electronic ballast15 Electronic dimming ballast16

CLC CLF FLC FLC5

Convex lens clear Convex lens frosted Flat lens clear Flat lens clear, 5° axial spread FLC10 Flat lens clear, 10° tilt FLC20 Flat lens clear, 20° tilt FLSR Flat lens, slip resistant FLCAS Flat lens clear, anti-slip FLF Flat lens frosted

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

9 (22.9)

16 (40.6)

12-1/4 (31.1)

14-1/2 (36.8)

Notes 19-1/2 (49.5)

Incandescent, Low voltage, Fluorescent

HID

1 2 3 4

HYDREL

5 6 7

640

8 9 10

Not available with M9430 and M9440. If 12V is selected, transformer will not be provided. Only available in 120V. MVOLT is only available with fluorescent and metal halide lamps with electronic ballasts. All distributions not available with all lamp types. Available distributions are MFL, WWD and ASY. Available distributions are NSP and MFL for T6; NSP, MFL and WWD for T4. Not available with PAR, MR or fluorescent lamps. Only valid with WWD distribution. Accessories are mutually exclusive. Only RG and GS can be ordered together. External options and trims not available with SS doors.

11 12 13 14 15 16 17 18 19 20

RG is not valid with CLC or CLF lenses. SF available with 120V, 277V or 347V and HID only. DF available with 208V, 220V or 240V and HID only. Only available with metal halide lamps and MVOLT voltage. Standard on CMT4 lamps. For use with 0-10V analog dimmer (by others). Additional electrical conductors are required. Consult Hydrel for details. Finish only available on aluminum doors. Lamps available with GEB or MLEBAD electronic MVOLT only. Default conduit entry. For lens load ratings, slip resistance and temperatures, see page 655.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use Hydrel's M9400 series modular in-grade lights are multi-purpose units designed for uplighting architectural and landscape features. Construction Door material: Cast aluminum, cast bronze or stainless steel. Available in round or square door trim.

Finishing section: Single or double lens design includes door assembly with 360° Aim-Lock™ lamp module support ring. Module indexing provides easy maintenance and relamping without reaiming. Active optical lenses also are available. Door trim locks into position with two stainless steel captive, tamper-resistant fasteners.

Finish: Finish is natural aluminum or bronze. Stainless steel door is brushed finish. Aluminum doors may be painted. See ordering guide for color options.

Rough-in section: Injection- molded polymer with integral junction box for through- branch wiring. The housing is U.V. stabilized, impact- and corrosion-re-

sistant for use in all types of environments. The rough-in has a cylinder configuration and houses the lamp components and top door finishing section. Electrical Lamp type: Monochromatic LEDs, 12W LED array included. Lamp module: Stainless steel, sealed and purged of all moisture with silicone gaskets, stainless steel clamp band and single fastener. Electrical connection to lamp module is done through submersible connector with gold-plated contacts.

Power module: LED driver is encapsulated in a customdesigned heat-dissipating epoxy resin that also eliminates all moisture intrusion. Module is provided with submersible rated cord leads for connection to integral junction box and lamp module. Conduit entry: Two (2) bottom or side entries available. Box suitable for through-branch wiring. Splicing volume is 25 cubic inches (410 ccm). Listings U.L., C.U.L., IP68.

Example: M9410 A 12LED MVOLT CLW SP CLC 12B IHL LP BL

ORDERING INFORMATION Series

M9410 M9420 M9430 M9440

Round single lens Round double lens Square single lens Square double lens

Conduit entry 12B 12S 34B 34S

1/2" NPT bottom 1/2" NPT side 3/4" NPT bottom6 3/4" NPT side

ADDITIONAL INFORMATION

M9400 Monochromatic LED

IN-GRADE

Flow-Through In-Grade

PRODUCT INFORMATION

Material

Lamp type

Voltage

LED color

Distribution

Lens7

A B SS

12LED

MVOLT

CLW CLWHO WMW AMB BLU GRN RED RBL

SP MFL LSD WFL

CLC CLF FLC FLC10 FLC20 FLSR FLCAS FLF

Aluminum Bronze Stainless steel

Options 2

Internal accessories IHL Honeycomb louver LSF Linear spread filter3 External accessories2, 4 GS Glare shield LC Lexan cover RG Rock guard Trims2, 4 STS Stainless square BTR Bronze round BTS Bronze square STR Stainless square

Lamped

Finish5

LP LED array installed

BL BZ DDB DNA GN GR SND

Cool white Cool white - high output Warm white Amber Blue Green Red Royal blue

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Spot Medium flood Linear spread Wide flood

Convex lens clear Convex lens frosted Flat lens clear Flat lens clear, 10° tilt Flat lens clear, 20° tilt Flat lens, slip resistant Flat lens clear, anti-slip Flat lens frosted

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

9 (22.9)

10 (25.4) 16 (40.6)

Notes

9 (22.9)

www.hydrel.com | 1-800-750-9773

HYDREL

PSG10

1 Not available with M9430/M9440 square model. 2 Accessories are mutually exclusive; only RG and GS can be ordered together. 3 Not available with CLC or CLF convex lens. 4 Accessory not available with SS door material. 5 Finish only available with aluminum material. 6 Default conduit entry. 7 Specify top lens. Bottom lens is FLC format. 8 For lens load ratings and slip resistance, see page 655.

641

IN-GRADE

Flow-Through In-Grade

PRODUCT INFORMATION Intended Use Hydrel's M9700 series modular in-grade lights are multi-purpose units designed for uplighting of architectural and landscape features. These units can be flush-mounted into a variety of substrates or landscape materials.

M9700

Construction Door material: Cast aluminum, cast bronze, cast aluminum or bronze with stainless perforated trim insert, or stainless steel. Available in round or square door trim. Finish: Finish is natural aluminum or bronze. Stainless steel door is brushed finish. Aluminum doors may be painted.

Rough-in section: Injectionmolded polymer with integral junction box for throughbranch wiring. The housing is U.V. stabilized, impact- and corrosion-resistant for use in all types of environments. The rough-in section has a cylinder/vault configuration and houses the lamp and power module components and top door finishing section. Lamp module: Stainless steel housing, factory-sealed and purged of all moisture for longer component life. Lens is sealed with silicone gasket and stainless steel clamp band assembly with single fastener. Electrical connection to lamp module is

Series

Material

Lamp type

M9710 Round single A Aluminum lens B Bronze M9720 Round double SS Stainless lens steel M9730 Square single lens M9740 Square double lens

Voltage Distribution 14

Incandescent P38100I P38150I P38250I 100Q 150Q 250Q Fluorescent 18TRT

26TRT 32TRT 42TRT Metal halide 70M 100M 150M P3870M P38100M P38150M

Ceramic metal halide 70CMT6 150CMT6 70CM 100CM 150CM P3870CM P38100CM

High pressure sodium 50S 70S 100S 150S

120 208 240 277 347 MVOLT1

NSP SP NFL MFL FL WFL WWD

Narrow spot Spot16 Narrow flood Medium flood Flood17 Wide flood16 Wall wash distribution2

Options

ADDITIONAL INFORMATION

External accessories5, 6 GS Glare shield LC Polycarbonate protective cover7 LS Light shield RG Rock guard Trims5, 6 BTR Bronze trim round BTS Bronze trim square

Ballast11 GEB Electronic ballast MLEBAD Electronic dimming ballast12

STR Stainless trim round STS Stainless trim square Rings and masks PRR Protective ring round PRS Protective ring square GM Grout mask Fusing SF Single fuse9 DF Double fuse10

12” Bronze or Aluminum Round

HYDREL

Lens

Conduit entry

FLC FLC10 FLC20 FLF FLC5

12B 12S 34B 34S

Flat lens clear Flat lens clear, 10° tilt Flat lens clear, 20° tilt Flat lens frosted Flat lens clear, 5° axial spread2 FLSR Flat lens, slip resistant FLCAS Flat lens clear, anti-slip CLC Convex lens clear CLF Convex lens frosted

12” Bronze or Aluminum Square

1/2" NPT bottom 1/2" NPT side 3/4" NPT bottom8 3/4" NPT side

Finish13

LP Lamp BL Black installed BZ Bronze DDB Dark bronze DNA Natural aluminum GN Green GR Gray SND Sand

STG Steel gray TVG Terra verde green WH White CF Custom

Notes

13 (33.0)

16 (40.7)

20 (50.8)

13” Stainless Steel Round 12 (30.5)

12 (30.5)

Listings U.L., C.U.L., IP68, CE, NEMKO.

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

12 (30.5)

Conduit entry: Two (2) bottom or side entries available. Box suitable for through-branch wiring. Splicing volume is 25 cubic inches (410 ccm).

Electrical Power module: Ballast is encapsulated in a customdesigned heat-dissipating ep-

Lamped

Internal accessories5 IHL Internal honeycomb louver ISS Internal source shield3 LSF Linear spread CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red WWL Wall wash louver4

642

Finishing section: Single lens design includes door assembly with 360° Aim-LockTM lamp module support ring. Module indexing provides easy maintenance and relamping without re-aiming. Active optical lenses are also available. Door trim locks into position with two stainless steel captive, tamperresistant fasteners.

oxy resin that also eliminates all moisture intrusion to the ballast. Module is provided with submersible rated cord leads for connection to integral junction box and lamp module. Standard ballast is high power factor, fluorescent electronic or HID magnetic.

Example: M9710 B 150CMT6 120 NSP FLC 34B ISS GS LP

ORDERING INFORMATION 18

done through a submersible quick-pull plug connector with gold-plated contacts. Standard unit is thermally protected. Lamp included.

13 (33.0)

13” Stainless Steel Square

Incandescent

12 (30.5) HID, Fluorescent

1 Standard on fluorescent and metal halide lamps with electronic ballast option. 2 FLF5 lens recommended for 70W HID and lower. FLC5 lens recommended for 100W HID and higher with WWD distribution. 3 ISS not available with PAR or fluorescent lamps, or WWD distribution. 4 Not available with PAR lamps. 5 Accessories are mutually exclusive. Choose one. 6 Not available with SS material. 7 LC not available for M9710, M9730. 8 Default coduit entry. 9 SF available with 120V, 277V or 347V HID only. 10 DF available with 208V, 220V or 240V HID only. 11 Available with MVOLT (120V-277V) voltage only for metal halide lamps to 150W maximum. 12 For use with O-10V analog dimmer (by others). Additional electrical conductors are required. Consult Hydrel for details. 13 Finish only available on aluminum doors. 14 Incandescent models available with 120V only. 15 NSP only available with T4 or T6 lamps. 16 Not available with T6 lamps. 17 Only available with PAR lamps. 18 For lens load ratings, slip resistance and temperatures, see page 655.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use Hydrel's M9700 series modular in-grade lights are multi-purpose units designed for uplighting of architectural and landscape features. These units can be flush-mounted into a variety of substrates or landscape materials. Construction Door material: Cast aluminum, cast bronze, cast aluminum or bronze with stainless perforated trim insert, or stainless steel. Available in round or square door trim. Rough-in section: Injectionmolded polymer with integral junction box for through-branch wiring. The housing is U.V. stabilized,

impact- and corrosion-resistant for use in all types of environments. The rough-in section has a cylinder/vault configuration and houses the lamp and power module components and top door finishing section.

single fastener. Electrical connection to lamp module is done through a submersible quick-pull plug connector with gold-plated contacts. Lamp included. Finishing section: Includes door assembly with 360° Aim-Lock™ lamp module support ring. Module indexing provides easy maintenance and relamping without reaiming. Active optical lenses also are available. Door trim locks into position with two stainless steel captive, tamper-resistant fasteners.

Lamp module: Stainless steel housing, factory-sealed and purged of all moisture for longer component life. In the double lens units, the lamp module is suspended below the top door lens in a surface-adjustable, 15° tilt mechanism. The insulating air layer helps to reduce surface temperatures. Lens is sealed with silicone gasket and stainless steel clamp band assembly with

Finish: Natural aluminum or bronze. Stainless steel door is brushed finish. Aluminum doors may be painted.

Electrical Lamp type: Monochromatic LED, 22W.

M9700 Monochromatic LED

IN-GRADE

Flow-Through In-Grade

PRODUCT INFORMATION

Conduit entry: Two (2) bottom or side entries available. Box suitable for through-branch wiring. Splicing volume is 25 cubic inches (410ccm). Listings U.L.,C.U.L., IP68.

Visit www.hydrel.com for color changing LED specifications.

Example: M9710 A 22LED RBL 120 SP FLC 34B IHL LP BL

ORDERING INFORMATION Series

M9710 M9720 M9730 M9740

Material Round single lens Round double lens Square single lens Square double lens

Conduit entry 12B 12S 34B 34S

A B SS

Lamp type

Aluminum Bronze Stainless steel

22LED

LED color CLW CLWHO WMW AMB BLU GRN RED RBL

Cool white Cool white high output Warm white Amber Blue Green Red Royal blue

Options

1/2" NPT bottom 1/2" NPT side 3/4" NPT bottom7 3/4" NPT side

ADDITIONAL INFORMATION

Internal accessories IHL Internal honeycomb louver LSF Linear spread External accessories2, 3, 4 GS Glare shield LC Polycarbonate protective cover RG Rock guard

2, 4

Voltage

Trims BTR Bronze trim round BTS Bronze trim square STR Stainless trim round STS Stainless trim square Dimming LDIM 0-10V Dimming6

120 MVOLT

Distribution

Lens

SP MFL LSD WFL

FLC FLC10 FLC20 FLF FLCAS FLSR CLC CLF

Spot Medium flood Linear spread distribution Wide flood

Lamped

Finish5

LP Lamp included

BL BZ DDB DNA GN GR SND

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Flat lens clear Flat lens clear, 10° tilt Flat lens clear, 20° tilt Flat lens frosted Flat lens clear, anti-slip Flat lens, slip resistant Convex lens clear Convex lens frosted

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

12 (30.5)

12” Bronze or Aluminum Round

13 (33.0)

16 (40.7)

13” Stainless Steel Round 12 (30.5) LED rough-in housing

12 (30.5)

PSG10

13” Stainless Steel Square

www.hydrel.com | 1-800-750-9773

1 2 3 4 5 6 7 8

Not available with M9730 or M9740 square model. Accessories are mutually exclusive; choose one only. Not available with CLC or CLF convex lens. Accessory not available on "SS" door material. Finish only available on aluminum door material. Dimming available with 120V only. Default conduit entry. For lens load ratings and slip resistance, see page 655.

HYDREL

12” Bronze or Aluminum Square

13 (33.0)

Notes

643

IN-GRADE

Flow-Through In-Grade

PRODUCT INFORMATION

M9800

Intended Use The M9800 series modular in-grade lights are multi-purpose units designed for flush mounting in soil or concrete. The units consist of a factorysealed, thermally protected lamp module and epoxy encapsulated power module placed in a secured rough-in section (RIS) which includes channeled convective cooling, an integral junction box and door assembly.

and module indexing segment providing maintenance and relamping without re-aiming. The lamp module is suspended below the door lens with a surface-adjustable, 10° tilt mechanism. The insulating air layer reduces surface temperatures. Doors available in cast aluminum or cast bronze, round. Two stainless steel captive fasteners lock the finishing section into the rough-in section.

inches /1230ccm), U.V. stabilized, impact- and corrosionresistant for use in many environments. Houses power module, lamp modules and finishing components.3

Construction Finishing section: Includes 360° Aim-Lock™ support ring, door assembly, tilt ring,

Rough-in section: Injectionmolded polymer cylinder with integral junction box for branch wiring (75 cubic

Power module: Ballast is encapsulated in a customdesigned heat-dissipating epoxy resin to eliminate

Series

Material

M9820 Round double lens

Conduit entry 1B 12B 12S 34B 34S

Lamp type

A Aluminum B Bronze

Incandescent P64500I PAR64, ext. mogul end prong10 P56300I PAR56, mogul end prong10 Metal Halide 200M E28, mogul 250M E28, mogul 320M E28, mogul

400M E37, mogul High Pressure Sodium 250ST E18, mogul 400ST E18, mogul

Options Internal accessories6 ISS Internal source shield5,10 IHL Internal honeycomb louver WWL Wall wash louver External accessories6 GS Glare shield RG Rock guard

1" NPT bottom 1/2" NPT bottom 1/2" NPT side4 3/4" NPT bottom12 3/4" NPT side4

Electrical Lamp type: Incandescent – PAR64 500W max. HID – E23, E28, E37 and elliptical to 400W.

Conduit entry: Two (2) bottom or side entries available. Box suitable for through-branch wiring. Splicing volume is 25 cubic inches (410 ccm).

Socket: Incandescent - Mogul end prong or GX16D base. HID - Mogul or E40 base.

Listings U.L., C.U.L., CE, NEMKO, IP68.

Example: M9820 A 400M 277 SP FLC 34B ISS SF LP BZ

ORDERING INFORMATION 13

all moisture intrusion to the ballast. Provided with submersible rated cord/ connector for connection to integral junction box and lamp module. HID ballasts are magnetic.

ADDITIONAL INFORMATION

Trim ring BTR Bronze trim ring STR Stainless trim ring Fusing SF Single fuse7 DF Double fuse8 Ballast SCWA Super constant wattage ballast9

Voltage

Distributions

Lens

120 208 220 240 277 347

SP NSP MFL WFL WWD VNSP

FLC FLC5 FLC10 FLC20

Spot Narrow spot2 Medium flood Wide flood2 Wall wash10 Very narrow spot2

Lamped

Finish11

LP Lamp installed

BL BZ DDB DNA GN GR SND

Black Bronze Dark bronze Natural aluminum Green Gray Sand

Flat lens clear3 5° axial spread Flat lens clear, 10° tilt Flat lens clear, 20° tilt

STG TVG WH CF

Steel gray Terra verde green White Custom finish

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

18 (45.7)

Notes 16-1/8 (41.0)

27-1/2 (69.9)

HYDREL

18 (45.7)

644

HID

18 (45.7) Incandescent

1 Incandescent models available with 120V only. 2 Only available with PAR lamps. 3 FLC will be used if lens is not chosen except for WWD distribution, then FLC5 will be used. 4 Not available with incandescent lamps. 5 Not available with WWD distribution. 6 Mutually exclusive; choose only one. 7 SF is only available with 120V, 277V or 347V on HID only. 8 DF is only available with 208V, 220V or 240V on HID only. 9 Standard on all metal halide lamps. 10 WWD and ISS not available with P56300I, P64500I. 10 Paint finish only available on aluminum doors 12 Default conduit entry. 13 For lens load ratings, slip resistance and temperatures, see page 655.

1-800-750-9773 | www.hydrel.com

PSG10

M9000 Accessories and Door Material Installation Accessories

IN-GRADE

Accessories

PRODUCT INFORMATION

Safety Accessories

BTR Bronze trim ring

STR Stainless trim ring

RG Rock guard, bronze or aluminum

LC Polycarbonate protective cover

Light Control Accessories

IHL Internal honycomb louver

WWL Wall wash louver

ISS Internal source shield

FLC5 5째 Axial spread lens

FLC10 10째 tilt lens

FLC20 20째 tilt lens

GS Glare shield, bronze or aluminum

Door Material Options

PSG10

B Bronze door

www.hydrel.com | 1-800-750-9773

SS Stainless steel door

HYDREL

A Aluminum door

645

IN-GRADE

Sealed In-Grade

PRODUCT INFORMATION Intended Use Hydrel's Paradox Series sealed modular in-grade luminaires are multi-purpose units designed for uplighting architectural and landscape features. These units can be flush-mounted into a variety of substrates or landscape materials, and are ideal when aperture size or luminaire depth is a priority.

PDX4 Paradox™ 4" Architectural In-Grade

Construction Door material: Die-cast bronze or stainless steel.

Housing: Die-cast bronze and injection-molded thermoplastic. The housing is U.V. stabilized, impact- and corrosion-resistant for use in all types of environments. Finish: Natural bronze or stainless steel with a brushed finish. Optics Lens/seal: Tempered clear flat borosilicate glass. The patent-pending door/lens seal uses proprietary knife edge technology to secure the assembly to the housing.

Two captive screws hold the assembly in place. The lens is notched to provide maximum aperture opening. Electrical Lamp: MR16 GX5.3 base or MR11GU4 base. Conduit entry: Two 1/2" NPT side entries standard, two 1/2" bottom entries are optional. Power supply: Optional integrally mounted transformer, prewired for easy installation and maintenance.

Example: PDX4 B M35 120 NSP FLC 12S IHL LPI

ORDERING INFORMATION Series

Material

PDX4 In-grade PDX4ML Marker light

Lamp type

Stainless steel BSS Brushed stainless steel2 B Bronze

M20 M35 M50 MR1120 MR1135

Voltage Distribution

MR16, GX5.3, 20W max. MR16, GX5.3, 35W max. MR16, GX5.3, 50W max. MR11, GU4, 20W max. MR11, GU4, 35W max.

12 120

PDX4 NSP SP NFL WFL

Narrow spot 3 Spot Narrow flood Wide flood3 Flood3

Lens FLC FLCAS FLSR

Flat lens clear Flat lens clear, anti-slip2 Flat lens, slip resistant2

Conduit entry

Options2, 4

Lamped

12S Two 1/2" NPT side (standard) 12B Two 1/2" NPT bottom

Internal accessories IHL Internal honeycomb louver LSF Linear spread filter CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red

LPI Lamp included

FL PDX4ML ML180 180° ML360 360° ADDITIONAL INFORMATION

Listings U.L., C.U.L.,CSA-U.S., CSA, IP68.

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

3-7/8 (9.9)

4 (10.2) 3-7/8 (9.9)

4 (10.2) 5 (12.7)

8 (20.3)

5 (12.7) Low voltage In-grade

5 (12.7) 5 (12.7)

5 (12.7)

Line voltage

Low voltage

8 (20.3)

5 (12.7) Line voltage Marker Light

HYDREL

Notes

646

1 2 3 4 5

Transformer sold separately. Only available if PDX4 is chosen. Not available with MR11 lamps. Only one accessory available. For lens load ratings, slip resistance and temperatures, see page 655.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use Hydrel's Paradox Series sealed modular in-grade luminaires are multi-purpose units designed for uplighting architectural and landscape features. These units can be flush-mounted into a variety of substrates or landscape materials, and are ideal when aperture size or luminaire depth is a priority. Construction Door material: Die-cast bronze or stainless steel.

Housing: Die-cast bronze and injection-molded thermoplastic. The housing is U.V. stabilized, impact- and corrosion-resistant for use in all types of environments. Finish: Natural bronze or stainless steel with a brushed finish. Lens/seal: Tempered clear flat borosilicate glass. The patent-pending door/lens seal uses proprietary knife edge technology to secure the assembly to the housing. Two captive screws hold the assembly in place. The lens is

notched to provide maximum aperture opening. Electrical LED: Monochromatic LED, 9W.

Power supply: Integrally mounted modular LED driver, prewired for easy installation and maintenance. Listings CSA-U.S., CSA, IP68.

Example: PDX4 B 9LED CLW MVOLT SP FLC 12S TKO LPI Lamp type

Material

PDX4 In-grade PDX4ML Marker light

SS Stainless steel BSS Brushed stainless steel1 B Bronze

ADDITIONAL INFORMATION

Monochromatic LED

Conduit entry: Two 1/2" NPT side entries standard; two 1/2" bottom entries are optional.

ORDERING INFORMATION Series

PDX4 Paradox™ 4" Architectural In-Grade

IN-GRADE

Sealed In-Grade

PRODUCT INFORMATION

LED color

9LED

CLW WMW AMB BLU GRN RED RBL

Voltage Distribution

Cool white Warm white Amber Blue Green Red Royal blue

12 MVOLT

PDX4 SP MFL

Spot Medium flood

PDX4ML ML180 180° ML360 360°

Lens

Conduit entry

Options

Lamped

FLC Flat lens clear FLCAS Flat lens clear, anti-slip1 FLSR Flat lens, slip resistant1

12S Two 1/2" NPT side (standard) 12B Two 1/2" NPT bottom

TKO Tilt kit optic1

LPI LED array included

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

3-7/8 (9.9)

4 (10.2) 3-7/8 (9.9)

4 (10.2) 5 (12.7)

8 (20.3)

5 (12.7) Low voltage

5 (12.7) 5 (12.7)

5 (12.7)

Line voltage

Low voltage

In-grade

8 (20.3)

5 (12.7) Line voltage Marker Light

1 Only available if PDX4 is chosen. 2 Transformer sold separately. 3 For lens load ratings and slip resistance, see page 655.

PSG10

www.hydrel.com | 1-800-750-9773

HYDREL

Notes

647

IN-GRADE

Sealed In-Grade

PDX7 Paradox™ 7" Architectural In-Grade

Construction Door material: Die-cast bronze or stainless steel, available with die-cast brass extension for cool application. Housing: Compressionmolded polyester with patent-pending internal direct access junction box for through-branch wiring. Internal junction box provides 44 cubic inches volume to ensure proper seal during installation. The housing is

U.V. stabilized, impact- and corrosion-resistant for use in all types of environments. The housing has a sidecar configuration and houses the lamp and power module components as well as the lens/door finishing section.3 Lens/seal: Tempered clear flat borosilicate glass. The patent-pending door/lens seal uses proprietary knife edge technology to secure the assembly to the housing. Three captive screws hold the assembly in place. The lens is notched to provide maximum aperture opening. Finish: Natural bronze or stainless steel with a brushed finish. Bronze doors may be painted. Consult factory for color options. Optics Reflectors (non-reflectorized lamps): High-purity anodized

Material

PDX7 In-grade PDX7CL In-grade with cool lens

SS BSS B

Flat lens clear Flat lens clear, anti-slip12 Flat lens, slip resistant12

ADDITIONAL INFORMATION

Low voltage M20 MR11, GZ4 M35 MR11, GZ4 M50 MR16, GX5.3 M75 MR16, GX5.3 P3650 PAR36, screw terminal P3675 PAR36, screw terminal AR11135 G53

AR11150 G53 AR11175 G53 Incandescent2 P2050I PAR20, medium P3050I PAR30, medium HID 20MHCP PGJ59 20MHCG GU6.510 Options

Internal accessories IHL Internal honeycomb louver16 ISS Internal source shield7 WWL Wall wash internal louver8 LSF Linear spread filter CFAMB Color filter amber CFGRN Color filter green CFRED Color filter red

Conduit entry: Two molded 3/4" NPT side entries standard; bottom hubs are molded with a 3/4" NPT membrane knockout. Ballast: Integrally mounted modular ballast package, prewired with quick connectors for easy installation and maintenance. Ballasts are rated for low starting temperatures. High power factor magnetic ballasts standard; electronic ballasts also available. Listings U.L., C.U.L.

Fluorescent: Triple-tube CFL 4-pin base, 26W max.

R11135CM GX8.5 R11170CM GX8.5 Fluorescent 4, 13 18TRT Triple tube, GX24q2 26TRT Triple tube, GX24q3

12 120 208 240 277 347 MVOLT5

Distribution NSP SP NFL MFL WFL FL WWD

Narrow spot Spot Narrow flood Medium flood Wide flood Flood19 Wall wash distribution6

Lamped External accessories RG Decorative rock guard GS Glare shield21 Fusing SF Single fuse14 DF Double fuse15 Ballast GEB Electronic ballast20

LPI Lamp included

For additional product information, visit www.hydrel.com.

Notes 10 (25.4)

5 (12.7) 15 (38.1)

Standard Housing

11, 17

T4, G8.5 T4, G8.5 T4, G8.511, 17 T6, G1218 T6, G1218 PAR20, medium PAR30, medium PAR30, medium

34S Two 3/4" NPT side (standard)

8 (20.3) 9 (22.9)

20CMT4 35CMT4 70CMT4 35CMT6 70CMT6 P2035CM P3035CM P3070CM

Conduit entry

7 (17.8)

HYDREL

HID: T4 or T6 bi-pin base, 70W max PAR-20 or PAR-30 medium base, 70W max color corrected metal halide.

Voltage 1

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

648

Incandescent: PAR20, PAR30, medium base.

Lamp type

Stainless steel Brushed stainless steel12 Bronze

Lens FLC FLCAS FLSR

Electrical Low voltage: MR11 GZ4 base, 35W max. MR16 GX5.3 base, 75W max., PAR36 screw terminal base, 75W max. AR111 G53 base, 75W max.

If a specific lamp is desired, specify manufacturer's lamp number; most lamps can be supplied. Lamp included.

Example: PDX7 B 35CMT6 120 NSP FLC 34S RG LPI

ORDERING INFORMATION Series22

specular or semi-specular materials in various distributions provide maximum performance and uniformity. Lamps can be aimed 15° from vertical and rotated 360°. All configurations available with Hydrel's patented Aim-Lock™ locking components to allow re-lamping and maintenance without re-aiming.

5 (12.7) 15 (38.1) Cool Lens Housing

1 Low voltage only available with 12V, 120V, 240V, 277V inputs. 2 Incandescent models are available with 120V only. 3 Available for low voltage lamps only. 4 18TRT or 26TRT available with MVOLT only. 5 Available with HID if GEB chosen, standard with fluorescent lamps. 6 Available with T4 G8.5 base, 20MH PGJ5 base, and 20MH GU6.5 base. 7 Available with T6 and T4 lamps in NSP distribution only. Not valid with WWD. 8 Available with HID if GEB chosen, standard with fluorescent lamps. 9 Philips Mini MasterColor available in 20W and 120V GEB only.

10 GE Mini UltraMax available in 20W and120V GEB only. 11 20CMT4, 35CMT4 or 70CMT4 only valid with MVOLT and GEB. 12 Not available with decorative rock guard. 13 Available only in MFL light distribution. 14 SF is available only with 120V, 277V or 347V on HID. 15 DF is available only with 208V, 220V or 240V on HID. 16 IHL not available with color filters. 17 Available with NSP, MFL and WWD only. 18 Available with NSP, MFL and WFL only. 19 Only available with PAR lamps. 20 HID only. 21 SS door only. 22 For lens load ratings, slip resistance and temperatures, see page 655.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use Hydrel's Paradox Series sealed modular in-grade luminaires are multi-purpose units designed for uplighting architectural and landscape features. These units can be flush mounted into a variety of substrates or landscape materials, and are ideal when aperture size or luminaire depth is a priority. Construction Door material: Die-cast bronze or stainless steel.

Housing: Compressionmolded polyester with patent-pending internal direct-access junction box for through-branch wiring. Internal junction box provides 44 cubic inches volume to ensure proper seal during installation. The housing is U.V. stabilized, impact- and corrosion-resistant for use in all types of environments. The housing has a sidecar configuration and houses the lamp and power module components as well as the lens/door finishing section.

Finish: Natural bronze or stainless steel with a brushed finish.

Electrical LED: Monochromatic LEDs, 12W.

Optics Lens/seal: Tempered clear flat borosilicate glass. The patent-pending door/lens seal uses proprietary knife edge technology to secure the assembly to the housing. Three captive screws hold the assembly in place. The lens is notched to provide maximum aperture opening.

Conduit entry: Two molded 3/4" NPT side entries standard; bottom hubs are molded with a 3/4" NPT membrane knockout.

Series

Material

PDX7

Listings U.L., C.U.L.

Example: PDX7 B 12LED CLW MVOLT SP FLC 34S LPI Lamp type LED color

SS Stainless steel 12LED BSS Brushed stainless steel1 B Bronze

ADDITIONAL INFORMATION

Monochromatic LED

Power module: Integrally mounted modular LED driver, prewired with quick connectors for easy installation and maintenance.

ORDERING INFORMATION 3

PDX7 Paradoxâ&#x201E;˘ 7" Architectural In-Grade

IN-GRADE

Sealed In-Grade

PRODUCT INFORMATION

CLW Cool white CLWHO Cool white - high output WMW Warm white AMB Amber BLU Blue GRN Green RED Red RBL Royal blue

Voltage

Distribution

Lens

MVOLT

SP MFL WFL LSD

FLC Flat lens clear 34S Two 3/4" NPT side (standard) FLCAS Flat lens clear, anti-slip1 FLSR Flat lens frosted, slip resistant1

Spot Medium flood Wide flood Linear spread distribution

Conduit entry

Options

Lamped

Internal accessories IHL Internal honeycomb louver External accessories RG Decorative rock guard GS Glare shield2

LPI LED array included

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 7 (17.8) 8 (20.3) 9 (22.9)

5 (12.7) 15 (38.1)

1 Not available with decorative rock guard. 2 SS door only 3 For lens load ratings and slip resistance, see page 655.

PSG10

www.hydrel.com | 1-800-750-9773

HYDREL

Notes

649

IN-GRADE

Sealed In-Grade

PDX10 Paradox™ 10" Architectural In-Grade

Construction Door material: Die-cast bronze or stainless steel. Housing: Compressionmolded polyester with patent-pending internal direct-access junction box

for through-branch wiring. Internal junction box provides 44 cubic inches volume to ensure proper seal during installation. The housing is U.V. stabilized, impact- and corrosion-resistant for use in all types of environments. The housing has a sidecar configuration and houses the lamp and power module components as well as the lens/door finishing section. Lens/seal: Tempered clear flat borosilicate glass. The patent-pending door/lens seal uses proprietary knife edge technology to secure the assembly to the housing.

Series

Material

PDX10 In-grade PDX10CL In-grade with cool lens

SS Stainless steel BSS Brushed stainless steel8 B Bronze

Lens

ADDITIONAL INFORMATION

Incandescent P3050I PAR30, medium P38100I PAR38, medium P3075I PAR30, medium P38150I PAR38, medium 100Q T4, mini can 150Q T4, mini can Fluorescent3, 9 18TRT Triple tube, GX24q2 26TRT Triple tube, GX24q3 32TRT Triple tube, GX24q3 42TRT Triple tube, GX24q3

Metal halide 35CMT4 T4, G8.57 70CMT4 T4, G8.57 P3035CM PAR30 medium2 P3070CM PAR30 medium2 R11135CM GX8.52 R11170CM GX8.52 35CMT6 T6, G-122 70CMT6 T6, G-12 150CMT6 T6, G-122

Ballast: Integrally mounted modular ballast package, prewired with quick connectors for easy installation and maintenance. Ballasts are rated for low starting temperatures. High power factor magnetic ballasts standard; electronic ballasts also available. Listings U.L., C.U.L.

Options Internal accessories IHL Internal honeycomb louver ISS Internal source shield5 WWL Wall wash internal louver6 LSF Linear spread filter CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red

High pressure sodium 50S E17, medium2 70S E17, medium 100S E17, medium 150S E17, medium

Voltage

Distribution

120 208 220 240 277 347 MVOLT4

NSP SP NFL MFL WFL FL WWD

Narrow spot11 Spot Narrow flood Medium flood Wide flood Flood Wall wash distribution

Lamped External accessories RG Decorative rock guard Fusing SF Single fuse12 DF Double fuse13 Ballast GEB Electronic ballast4

LPI Lamp included

For additional product information, visit www.hydrel.com.

Notes 1 2 3 4 5 14 (35.7)

12 (30.5)

6 (15.2) 18 (45.7)

Standard Housing

E17, medium E17, medium E17, medium E17, medium E17, medium E17, medium2 E17, medium2 PAR38, medium10 PAR38, medium10 PAR38, medium10 PAR38, medium10

34S Two 3/4" NPT side (standard)

10 (25.4)

12 (30.5)

50M 70M 70CM 100M 100CM 150M 150CM P3870M P3870CM P38100M P38100CM

Conduit entry

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

HYDREL

Optics Reflector (non-reflectorized lamps): High-purity anodized specular or semi-specular materials in various distributions provide maximum performance and uniformity. Lamps can be aimed 15° from vertical and rotated 360°. All configurations available with indexed and locking components to allow re-lamping and maintenance without re-aiming.

Lamp type

FLC Flat lens clear FLCAS Flat lens clear, anti slip8 FLCSR Flat lens frosted, slip resistant8

650

Electrical Conduit entry: Two molded 3/4" NPT side entries standard; bottom hubs are molded with a 3/4" NPT membrane knockout.

Example: PDX10 B 35CMT6 120 NSP FLC 34S RG LPI

ORDERING INFORMATION 14

Four captive screws hold the assembly in place. The lens is notched to provide maximum aperture opening.

18 (45.7) Cool Lens Housing

6 7 8 9 10 11 12 13 14

Incandescent models are available with 120V only. 220V not available. Available with MVOLT only. If GEB and HID lamp source are chosen, use MVOLT. Available with E17, T6 and T4 lamps in NSP distribution only. Not valid with WWD. Available only with WWD distributions or TRT lamps. 35CMT4 or 70CMT4 only valid with MVOLT and GEB. Not available with decorative rock guard. Available only in MFL, WWD or WFL light distribution. PAR38 lamps only available with SP or FL distributions. NSP only valid with T4 or T6 lamps. SF is available only with 120V, 277V or 347V on HID. DF is available only with 208V, 220V or 240V on HID. For lens load ratings, slip resistance and temperatures, see page 655.

1-800-750-9773 | www.hydrel.com

PSG10

patent-pending internal direct-access junction box for through-branch wiring. Internal junction box provides 44 cubic inches volume to ensure proper seal during installation. The housing is U.V. stabilized, impact- and corrosion-resistant for use in all types of environments. The housing has a sidecar configuration and houses the lamp and power module components as well as the lens/door finishing section.

patent-pending door⁄lens seal uses proprietary knife edge technology to secure the assembly to the housing. Four captive screws hold the assembly in place. The lens is notched to provide maximum aperture opening.

Power module: Integrally mounted modular LED driver, prewired with quick connectors for easy installation and maintenance. Control: Standard DMX512. 3-channels per fixture: Red, Green, Blue or 4.

Electrical LED type: 22W Monochromatic or color changing.

Communication to fixture: DMX512 direct.

Conduit entry: Two molded 3/4" NPT side entries standard; bottom hubs are molded with a 3/4" NPT membrane knockout.

Optics Lens⁄seal: Tempered clear flat borosilicate glass. The

PDX10 Paradox™ 10" Architectural In-Grade

IN-GRADE

Sealed In-Grade

PRODUCT INFORMATION

Monochromatic LED

Listings U.L., C.U.L.

Visit www.hydrel.com for color changing LED specifications.

Example: PDX10 SS 22LED CLW MVOLT SP FLC 34S IHL LPI

ORDERING INFORMATION Series4 PDX10

Material SS Stainless steel BSS Brushed stainless steel1 B Bronze

Conduit entry 34S Two 3/4" NPT side (standard)

ADDITIONAL INFORMATION

Lamp type

LED color

22LED 22W

CLW CLWHO WMW AMB BLU GRN RED RBL

Cool white Cool white, high output Warm white Amber Blue Green Red Royal blue

Voltage 2

120 MVOLT

Distribution

Lens

SP MFL WFL LSD

FLC Flat lens clear FLCAS Flat lens clear, anti slip1 FLSR Flat lens frosted, slip resistant1

Options

Lamped

Internal accessories IHL Internal honeycomb louver External accessories RG Decorative rock guard Ballast LDIM 0-10V dimming3

LPI Lamp included

Spot, clear flat lens Medium flood, clear flat lens Wide flood, clear flat lens Linear spread distribution, clear flat lens

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 10 (25.4)

12 (30.5)

6 (15.2) 18 (45.7)

12 (30.5) Monochromatic Housing

Notes

PSG10

www.hydrel.com | 1-800-750-9773

Not available with RG option. Only valid with LDIM. Only valid with 120V. For lens load ratings, slip resistance and temperatures, see page 655.

HYDREL

1 2 3 4

651

IN-GRADE

Accessories

PRODUCT INFORMATION

PARADOX™ Safety Accessories

RG Decorative Rock Guard

FLCAS Anti-Slip Lens

FLSR Slip-Resistant Lens

Light Control Accessories

WWL Wallwash Louver

TKO 5° Tilt Lens Filter (PDX4 only)

IHL Internal Honeycomb Louver

TKO 10° Tilt Lens Filter (PDX4 only)

ISS Internal Source Shield

TKO 15° Tilt Lens Filter (PDX4 only)

GS Glare Shield Stainless Steel (PDX7 only)

TKO 5° Axial Spread Filter

HYDREL

TKO kit includes 5°, 10° and 15° tilt filters and the 5° axial spread filter.

652

Notes For visual representation only; not scaled proportionately.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use The 6700 Series sealed outdoor lighting fixture offers high performance and durability in an in-grade fixture. Many lamping options and distributions are available, including HID lamps to 100W. Integral ballast and junction box further add to the series' reliability.

Construction Material: Heavy wall cast bronze body and door.

Electrical Conduit entry: Two 1/2" or 3/4" NPT entries available, bottom or side.

Ballast: Integrally mounted ballast, rated for low starting temperatures.

6700

IN-GRADE

Sealed In-Grade

PRODUCT INFORMATION

Listings U.L., C.U.L., IP67.

Lens: Tempered clear flat borosilicate glass.

Finish: Raw bronze.

Example: 6700 B 70CMT6 MVOLT NSP FLC 34B ISS GEB LP

ORDERING INFORMATION Series

Material

Lamp type

6700

B Bronze

Incandescent1 P3050I P3075I P38100I P38150I P38250I 100Q 250Q

Ceramic metal halide 70CMT6 150CMT6 70CM 100CM 150CM P38100CM P3870CM

High pressure sodium 50S 70S 100S 150S

Distribution

120 208 240 277 347 MVOLT3

SP NSP NFL FL MFL WFL WWD

Spot5 Narrow spot4 Narrow flood Flood5 Medium flood Wide flood5 Wall wash distribution

Options15

Conduit entry 12B 34B 12S 34S

Fluorescent2 18TRT 26TRT 32TRT 42TRT Metal halide 100M 150M P38100M P3870M

Voltage

1/2" NPT bottom 3/4" NPT bottom (default) 1/2" NPT side 3/4" NPT side

ADDITIONAL INFORMATION

Lens15 CLC CLF FLC FLC5 FLC10 FLF FLC20 FLCAS

Convex lens clear Convex lens frosted Flat lens clear Flat lens clear, 5째 axial spread Flat lens clear, 10째 tilt Flat lens frosted Flat lens clear, 20째 tilt Flat lens clear, anti-slip

Lamped

Internal accessories IHL Internal honeycomb louver ISS Internal source shield6 WWL Wall wash louver7 ITB Internal tilt bracket14

Filters LSF CFAMB CFBLU CFGRN CFRED

Linear spread filter Color filter amber13 Color filter blue13 Color filter green13 Color filter red13

External accessories GS Glare shield LS Light shield RG Rock guard9 BTR Bronze trim round

Fusing SF Single fuse10 DF Double fuse11 Ballast12 GEB Electronic ballast

LP Lamp installed

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

1/4 (0.6) 10-1/2 (26.7)

13-3/4 (34.9)

9-1/4 (23.5)

18-1/8 (46.0)

Notes

PSG10

www.hydrel.com | 1-800-750-9773

Incandescent models available with 120V only. Fluorescent models available with 347V or MVOLT (120-277V) only. Standard on fluorescent lamps and metal halide lamps with GEB ballasts. NSP only available with T4 or T6 lamps. Not available with T6 lamps, FL only available with PAR lamps. ISS not available with WWD distribution or P38 lamp type. Only available with wall wash distribution (WWD). Accessories are mutually exclusive. Choose one. RG not available with CLC or CLF lenses. SF only is available with 120V, 277V or 347V on HID only. DF only is available with 208V or 240V on HID only. Electronic ballasts only are available with metal halide lamps and MVOLT voltage. Color filter available to 100W max. ITB only available with NSP and MFL. See page 645 for visual representation.

HYDREL

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

653

IN-GRADE

Wet-Dry In-Grade

PRODUCT INFORMATION Intended Use The WD9100 Series wet/ dry up lights represent the state-of-the-art in flush up light construction. These multi-purpose modular units are designed for mounting in areas that are prone to being submerged in water.

WD9100

Construction Door material: Cast bronze door with rock guard. Door locks the lamp housing into the rough-in section with a single tamperproof stainless fastener.

Rough-in section: Injectionmolded ABS, U.V. stabilized, impact- and corrosionresistant for use in all types of environments.

separately). BM – Minimum of 10' of 16-3 STWA submersible cord. Bronze junction box included. Cord length must be specified.

are available in the cast bronze integral junction box. Suitable for through-branch wiring. Junction box has 24 cubic inches of volume.

Lamp module housing: Stainless steel, sealed and purged of all moisture. Integral cord set attached. Cord entrance has a brass water-tight seal and is epoxy encapsulated. Thermally protected.

Optics Active lenses may be used with PAR lamps to modify the distributions.

Listings U.L.

Cord: NM – Minimum of 35' of 16-3 STWA , submersible cord for connection to a remote junction box (sold

WD9100 Wet-dry in-grade

Lamp type

Voltage 1

Incandescent P38100I PAR38, medium P38150I PAR38, medium P38250I PAR38, medium Quartz3 100Q T4, MC 150Q T4, MC

120

Options IHL Internal honeycomb louver MSR Modular support ring STR Stainless steel trim ring, round ADDITIONAL INFORMATION

Conduit entry: 1/2" and 3/4" NPT bottom openings

Example: WD9100 P38100I 120 SP FLC NM 34B IHL CSL30 LP

ORDERING INFORMATION Series

Electrical Lamp type: T-4 mini-can lamps to 150W. PAR-38 lamps to 250W. Lamps included.

Distribution SP NFL MFL FL WFL WWD

Spot Narrow flood2 Medium flood Flood1, 3 Wide flood4 Wall wash distribution5

Lens FLC FLC5 FLC10 FLC30 FLF FLCAS

Mounting Flat lens clear Flat lens clear, 5° axial spread Flat lens clear, 10° tilt Flat lens clear, 30° spread Flat lens frosted Flat lens clear, anti-slip

NM Niche mount BM Base mount7

Conduit entry 6

Cord set length

Lamped

CSL_ 10'-120' of cord available in 5' increments

LP Lamp installed

34B 3/4" NPT bottom 12B 1/2" NPT bottom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 12 (30.5)

12 (30.5)

12 (30.5) 11 (27.9)

11 (27.9)

Niche Mount

Base Mount

HYDREL

Notes

654

1 PAR38 lamps are available only with SP or FL distributions; lens options available for modifying PAR38 distributions. 2 NFL distribution requires a FLC30 lens. 3 FL distribution is not available with 100Q or 150Q. 4 WFL distribution requires a FLF lens. 5 WWD distribution requires a FLC5 lens. 6 NM mounting does not come with an underwater junction box. 7 BM mounting comes with an underwater junction box.

1-800-750-9773 | www.hydrel.com

PSG10

LENS Load Ratings, Slip Resistance and Lens Temperatures

M9000 Series

IN-GRADE

Technical Information

PRODUCT INFORMATION

SLIP RESISTANCE AND LOAD RATING M9400

M9700

M9800

MAXIMUM LOAD RATING

Peak compression force of 7,700 lbs. (single lens) or 2,550 lbs. (double lens). Peak compression force of 3,750 lbs. (single lens) or 3,200 lbs. (double lens).

Peak compression force of 3,950 lbs. (double lens).

LENS STATIC COEFFICIENT of FRICTION

M9400 Anti-Slip Lens (FLCAS): Dry = 0.76; Wet = 0.10 M9400 Slip Resistant Lens (FLSR): Dry = 0.66; Wet = 0.67

M9700 Anti-Slip Lens (FLCAS): Dry = 0.76; Wet = 0.10 M9700 Slip Resistant Lens (FLSR): Dry = 0.66; Wet = 0.67

M9800 Anti-Slip Lens (FLCAS): Dry = 0.76; Wet = 0.10 M9800 Slip Resistant Lens (FLSR): Dry = 0.66; Wet = 0.67

The M9000 Series offers reduced lens surface temperatures through the use of thermal isolation and patented convective cooling technologies. As with the use of all luminaires in pedestrian areas, Hydrel recommends that proper care be taken in the selection of luminaire location, lamp wattage and distribution in order to minimize pedestrian risk.

SINGLE LENS DOUBLE LENS % DECREASE

SP 114°C 70°C 38%

100W E17 MH NFL 94°C 85°C 10%

WFL 112°C 75°C 33%

M9400 LENS SURFACE TEMPERATURE2 35W 70W 75W 70W PAR30 70W PAR30 T6 MH T6 MH MR16 MR16 INCAN NSP MFL NSP MFL NFL SP MFL

M9800 LENS SURFACE TEMPERATURE2 250W E28 MH SP

400W E37 MH SP SPISSw/ MFL 54°C 53°C 75°C

MFL

DOUBLE LENS 49°C 46°C

SP 119°C 73°C 38%

150W T6 MH NSP MFL 129°C 153°C 93°C 139°C 28% 39%

20W T4 MH NSP MFL 69°C

66°C

82°C

89°C

117°C 119°C 107°C

120°C

107°C

DOUBLE LENS 49°C

SINGLE LENS

46°C

54°C

53°C

75°C

73°C

70°C

82°C

90°C

% DECREASE

30%

34%

40%

36%

39%

35%

32%

16%

28%

M9700 LENS SURFACE TEMPERATURE2 150W E17 MH 32 W TRT SP MFL WFL SP MFL 107°C 120°C 107°C 69°C 68°C 70°C 82°C 90°C 43°C 44°C 35% 32% 16% 38% 35%

SP 89°C 55°C 38%

70W T6 MH MFL 104°C 97°C 7%

100W PAR38 MH SP 110°C 70°C 36%

WFL 98°C 65°C 34%

250W PAR38 INCAN FL NA 89°C NA

PDX Series SLIP RESISTANCE AND LOAD RATING PDX4

PDX7

PDX10

MAXIMUM LOAD RATING

Peak compression force of 2,048 lbs.

Peak compression force of 2,847 lbs.

Peak Compression Force of 4,944 lbs.

LENS COEFFICIENT OF FRICTION1

PDX4 Anti-Slip Lens (FLCAS): Dry = 0.78; Wet = 0.30 PDX4 Slip Resistant Lens (FLSR): Dry = 0.68; Wet = 0.59

PDX7 Anti-Slip Lens (FLCAS): Dry = 0.63; Wet = 0.20 PDX7 Slip Resistant Lens (FLSR): Dry = 0.81; Wet = 0.57

PDX10 Anti-Slip Lens (FLCAS): Dry = 0.63; Wet = 0.20 PDX10 Slip Resistant Lens (FLSR): Dry = 0.81; Wet = 0.57

The Paradox™ Architectural In-grade Cool Lens model (PDX7CL & PDX10CL) utilizes a combination brass top ring, heat sink, and reflective secondary IR lens filter to reduce heat by 30% when necessary. As with the use of all luminaires in pedestrian areas, Hydrel recommends that the proper care be taken in the selection of luminaire location, lamp wattage and distribution, in order to minimize pedestrian risk.

PDX7 LENS PDX7CL LENS % DECREASE

NSP 70°C 43°C 39%

20W T4 MH SP 75°C 44°C 42%

MFL 71°C 44°C 38%

NSP 95°C 53°C 44%

35W T4 MH SP 112°C 55°C 51%

MFL 94°C 57°C 39%

PDX4 LENS

NSP 133°C 73°C 45%

PDX4 LENS SURFACE TEMPERATURE3 20W MR16 35W MR16 50W MR16 SP NSP FL SP NSP FL SP NSP FL 79.5°C 77.5°C 81°C 122.8°C 119°C 123°C 134°C 131°C 148°C

PDX7 LENS SURFACE TEMPERATURE3 70W T4 MH 36 W T6 MH SP MFL NSP SP MFL 152°C 125°C 95°C 90°C 92°C 69°C 66°C 52°C 47.8°C 50°C 55% 47% 45% 47% 46%

PDX10 LENS SURFACE TEMPERATURE3 70W T6 MH

PSG10

NFL 83°C 55°C 33%

FL 86°C 55°C 36%

www.hydrel.com | 1-800-750-9773

70W T6 MH SP 123°C 62°C 50%

MFL 119°C 67°C 44%

70W PAR30 MH SP 125°C 62°C 50%

35W MR11 SP 113°C

9W LED SP MFL 33°C 35°C

70W PAR30 INCAN MFL 118°C 68°C 42%

75W MR16 MFL 106°C 53°C 50%

Notes 1 Per Ceramic Tile Institute: Coefficient of

150W friction values greater than 0.6 are considered PAR38 150W E17 HPS 42W TRT FLUOR slip resistant. Coefficient of friction values INCAN between 0.50 to 0.60 are conditionally slip resistant. Coefficient of friction values less MFL SP NFL FL SP NFL FL than 0.50 are questionable. 96°C 113°C 138°C 139°C 70°C 71°C 68°C 2 Test performed by: SGS U.S. Testing Company 69°C 75°C 75°C 83°C 43°C 46°C 43°C Inc. Tested in accordance with ISO/ICE 17025. 28% 34% 46% 40% 39% 35% 37% 3 Test performed by: Spec Testing, Inc. Tested in accordance with ISO/ICE 17025.

HYDREL

SP 79°C PDX10CL LENS 51°C % DECREASE 35% PDX10 LENS

100W 150W T6 MH 100W E17 MH 150W E17 MH PAR38 MH SP NFL FL SP NFL FL SP NFL FL MFL 99°C 105°C 108°C 95°C 115°C 114°C 115°C 148°C 143°C 98°C 60°C 77°C 72°C 60°C 76°C 75°C 68°C 88°C 92°C 65°C 39% 27% 33% 37% 34% 34% 41% 40% 36% 34%

NSP 129°C 63°C 51%

20W MR11 NFL 87°C

655

IN-GRADE

Well Lights

PRODUCT INFORMATION Intended Use The 9310 Series is designed for flush mounting in planters and open lawn areas.

9310

Construction Grill: Cast aluminum painted or cast bronze natural finish. Well: Thick wall A.B.S. pipe. Lamp housing: Cast aluminum or bronze body with fins for heat dissipation.

Electrical Lamp type: Incandescent – PAR20, 50W max. Low voltage – MR16, 50W max. HID – PAR20 HID, T4, 35W max. Conduit entry: Interconnecting conduit shall be 1/2" galvanized pipe, with brass cord seal. Listings U.L., CSA.

Visit www.hydrel.com for color changing LED specifications.

Example: 9310 B M50 120 NSP 34B LC LP

ORDERING INFORMATION Series

Material

Lamp type

9310

A Aluminum B Bronze

Low voltage M20 M35 M50 Incandescent P2035I P2050I

ADDITIONAL INFORMATION

Voltage Distribution Ceramic metal halide 20CMT41 35CMT41,7 P2035CM1,7

122 120 208 220 240 277 347 MVOLT3

Conduit entry Grill

NSP Narrow spot 12B 1/2" NPT bottom SP Spot 34B 3/4" NPT NFL Narrow bottom8 flood FL Flood MFL Medium flood WFL Wide flood

Lexan cover

Options

Lamped

Finish6

Ballast GEB Electronic ballast5

LP Lamp installed

BL BZ DDB DNA

Black Bronze Dark bronze Natural aluminum GN Green GR Gray SND Sand

STG Steel gray TVG Terra verde green WH White CF Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

7 Grill (17.8)

7 (17.8) 4-1/2 (11.4)

10 (25.4) 20 (50.8)

9310 Incandescent, Low Voltage (No Transformer)

9310 HID, Low Voltage (With Transformer)

HYDREL

Notes

656

1 2 3 4 5

Requires GEB ballast option. Transformer sold separately. MVOLT is standard on all metal halide lamps. Not all distributions available on all lamp types. Electronic ballasts are only available with metal halide lamps and MVOLT voltage. 6 Finish available on aluminum fixtures only. 7 T4 lamps only available with SP and MFL distribution. 8 Default conduit entry.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use The 9330 Series is designed for flush mounting in planter, tree grates or open lawn areas. The 9335 Series is designed for mounting in standard Neenah tree grates.

polycarbonate cover round grills are available. Eggcrate directional louvers provide 30째 cut-off.

Well: Thick wall polypropylene pipe. Optics Lens: Tempered glass lens. Convex lens clear (CLC) is standard. Convex lens frosted (CLF) also available.

Lamp module housing: Stainless steel, sealed and purged of all moisture to 100째F (38째C) and mounted integral with grill. Angular adjustment up to 15째. Electrical access to lamp module is done through submersible rated connector. Thermally protected. Lamp included.

Construction Grill: Cast aluminum or bronze; locks to well with two set screws. Full eggcrate louver or directional eggcrate louver square grills and directional louver or clear

Conduit entry: Two 3/4" NPT openings in the bottom of the junction box 25 cubic inches of volume suitable for through-branch wiring. Fixture/junction box connecting conduit is 1/2" galvanized pipe with brass cord seal.

Electrical Power module: Sealed unit encapsulated in an engineered composite resin to eliminate all water entry.

9330 9335

IN-GRADE

Well Lights

PRODUCT INFORMATION

Listings U.L., CSA, IP67.

Visit www.hydrel.com for color changing LED specifications.

Example: 9330 B P3070CM MVOLT SP CLC 34B DL ASR GEB LP

ORDERING INFORMATION Series 9330 9335

Material A Aluminum B Bronze

Lamp type 2

Voltage

Low voltage M20 M75 P3636ILV P3650ILV Incandescent1 P2050I P3050I P3075I

Grill

High pressure sodium 50S 70S 100S

12 120 2084 240 277 347 MVOLT5

Options Directional eggcrate louver (square)2 Full eggcrate louver (square)2 Directional louver (round) Clear polycarbonate (round)2

DEL FEL DL CPC

Ceramic metal halide 100CM P2035CM P3035CM P3070CM Metal halide 50M 70M 100M

ADDITIONAL INFORMATION

Internal accessories ASR Aim set ring2 IHL Internal honeycomb louver11 Fusing SF Single fuse7 DF Double fuse8

Ballast GEB

Distribution6 NSP SP MFL NFL FL WFL

Narrow spot Spot Medium flood Narrow flood Flood Wide flood12

Lens

Conduit entry

CLC Convex lens clear CLF Convex lens frosted

34B 3/4" NPT bottom

Lamped

Finish10

LP Lamp installed

BL BZ DDB DNA GN GR SND

Electronic ballast2

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

9-1/2 (24.1)

9-1/2 (24.1) Clear Polycarbonate (CPC)

Full Eggcrate Louver (FEL)

9-1/2 (24.1) Directional Louver (DL)

9-1/2 (24.1)

10-3/8 (27.0)

Directional Eggcrate Louver (DEL)

Notes 10-3/8 (27.0)

18 (45.7)

18-1/2 (47.0)

8-1/4 (21.0) 8-3/4 (22.2)

9330 HID w/ASR

9330 Incandescent

PSG10

www.hydrel.com | 1-800-750-9773

10-3/8 (27.0)

20 (50.8)

10-1/2 (26.7)

9335 HID

10-1/2 (26.7)

9335 Incandescent

1 2 3 4 5 6 7 8 9 10 11 12

Incandescent models available with 120V only. Not available with 9335. Transformer sold separately. 208V not available with low-voltage fixtures. Only available with GEB option. Not all distributions available with all lamp types. Check lamp manufacturers specification. SF available with 120V, 277V or 347V with HID only. DF available with 208V, 220V or 240V with HID only. Electronic ballasts are only available with metal halide lamps and MVOLT voltage. Finish available on aluminum fixtures only. Not available with MH, HPS or P30I WFL. WFL and NSP are only available with incandescent, PAR and MR16 lamps.

HYDREL

8-1/4 (21.0) 8-3/4 (22.2)

1/2 (1.3)

657

IN-GRADE

Well Lights

PRODUCT INFORMATION Intended Use Uplighting of trees, shrubs, terraces or walls from a flat lawn area. The units are completely weatherproof, designed for installation in damp areas.

9350

Construction Well: Thick wall polypropylene pipe for higher wattages. Grill: Cast aluminum or bronze. Locks to well with two set screws. Full eggcrate louver or directional eggcrate louver square grills and directional louver or clear

polycarbonate cover round grills are available. Eggcrate directional louvers provide 30째 cut-off.

Optics Lens: Tempered glass lens. Convex lens clear (CLC) is standard. Convex lens frosted (CLF) also available.

conduit is 1/2" galvanized pipe with brass cord seal. IJB (internal junction boxes) also are available. Listings U.L., C.E., CSA, IP67, NEMKO.

Electrical Power module: Sealed unit encapsulated in an engineered composite resin to eliminate all water entry. High power factor ballast. Conduit entry/junction box: Two 3/4" NPT. 25 cubic inches of volume suitable for through-branch wiring. Fixture/J-box connecting

Thermally protected. Lamp included.

Visit www.hydrel.com for monochromtic LED specifications.

Example: 9350 A 100M 120 FL CLC 34B DEL ASR LP TVG

ORDERING INFORMATION Series

Material

9350

A Aluminum B Bronze

Lamp type Quartz 100Q 150Q 250Q Incandescent1 P38100I P38150I

Grill DEL FEL DL CPC

Directional eggcrate louver (square) Full eggcrate louver (square) Directional louver (round) Clear polycarbonate (round) 4

ADDITIONAL INFORMATION

Voltage

Ceramic metal halide 70CM 100CM 150CM P3870CM Metal halide 70M 100M P38100M

150M P38150M High pressure sodium 70S 100S 150S

120 208 240 277 347 MVOLT2

Distribution SP Spot FL Flood

Options

Lamped

Finish8

Internal accessories IJB Internal junction box ASR Aim set ring IHL Internal honeycomb louver Fusing SF Single fuse5 DF Double fuse6 Ballast GEB Electronic ballast2, 7

LP Lamp installed

BL BZ DDB DNA GN GR SND

Lens

Conduit entry 3

CLC CLF

Convex lens clear Convex lens frosted

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

34B 3/4" NPT bottom

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

20-1/2 (52.1)

11-1/2 (29.2)

20 (50.8) Clear Polycarbonate Cover (CPC)

Incandescent

10 (25.4) 10-1/2 (26.7) HID

Full Eggcrate Louver (FEL)

11-1/2 (29.2)

HYDREL

Directional Louver (DL)

658

11-1/2 (29.2)

Directional Eggcrate Louver (DEL)

Notes 1 2 3 4 5 6 7 8

Only available in 120V. MVOLT is standard if GEB is selected on metal halide lamps. CLC is the default if lens option is not chosen. 100W max. for all lamp types. SF available with 120V, 277V or 347V only. DF available with 208V or 240V only. Electronic ballasts only are available with metal halide lamps. Finish available on aluminum fixture only.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use Hydrel's Model 9360DO, is a bronze well light, incorporating some of the internal components of our M9400 Series. This fixture features drive-over capacities, capable of supporting a wide variety of vehicle types and loads. The soils engineer or pavement designer must properly design this fixture into the supporting soil, subbase and finishing surface. A properly designed pavement section

could support the fixture for vertical and lateral loads up through AASHTO HS20 (20-ton truck; 16000 Ibs. per wheel load @ 15 miles per hour). The smaller fixture footprint allows for placement in tight areas.

submersible rated connector. Thermally protected.

with submersible rated cord leads for connection to integral junction box and lamp module.

Optics Lens: Tempered clear flat borosilicate glass.

Construction Rough-in section: Cast bronze frame with stainless steel well.

Electrical Power module: Sealed unit encapsulated in an engineered composite resin to eliminate all water entry.

Lamp module: Stainless steel, sealed and purged of all moisture to 100째F. Electrical access to lamp module is done through

LED driver is encapsulated in a custom-designed heatdissipating epoxy resin that also eliminates all moisture intrusion. Module is provided

9360DO Drive-Over Flush-Mounted Uplight

Conduit entry: Bottom openings are available in the cast bronze junction box. Suitable for through-branch wiring.

Example: 9360DO DN B 70CMT6 120 NSP FLC 34B LP

ORDERING INFORMATION Series

Orientation

9360DO Drive-over capacity

Voltage

Material

UP Flange up DN Flange down

Lamp type

NSP SP NFL MFL FL WFL WWD LSD

ADDITIONAL INFORMATION

LED color

LED 12LED 12W Low voltage M50 MR16, GX5.3 M75 MR16, GX5.3 P3650ILV PAR36, screw terminal P3675ILV PAR36, screw terminal

B Bronze

Distribution

123 120 208 220 240 277 347 MVOLT4

IN-GRADE

Well Lights

PRODUCT INFORMATION

Incandescent P2050I PAR20, medium P3050I PAR30, medium P3075I PAR30, medium 100Q T4, mini-can Fluorescent8 18TRT Triple tube, GX24q2 26TRT Triple tube, GX24q3 32TRT Triple tube, GX24q3

MH 20CMT4 35CMT4 35CMT6 70CMT4 70CMT6 P2035CM P3035CM P3070CM

T4, G8.52 T4, G8.52 T6, G129 T4, G8.52 T6, G129 PAR20, medium PAR30, medium PAR30, medium

Lens

Conduit entry

Options11

Lamped

FLC Flat lens clear

34B 3/4" NPT bottom

Fusing5 SF Single fuse DF Double fuse Ballast GEB Electronic ballast6

LP Lamp installed

Narrow spot11 Spot Narrow flood11 Medium flood Flood11 Wide flood Wall wash7,11 Linear Spread12

CLW CLWHO WMW AMB BLU CYN GRN RED RBL

Cool white Cool white - high output Warm white Amber Blue Cyan Green Red Royal blue

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

11 (27.9)

8-3/8 (21.3) Flange Up

Flange Down

11 (27.9)

8-3/8 (21.3) Flange Down

Flange Up

Notes

PSG10

16-14 41.3)

LED

Low Voltage/ Incandescent

Fluorescent

HID

16-1/4 (41.3)

19 (48.3)

22-1/2 (57.2)

www.hydrel.com | 1-800-750-9773

5 6 7 8 9 10 11 12

Incandescent models available with 120V only. Lamps available with GEB electronic MVOLT (120V-277V) ballast only. Available for low-voltage lamps only. Remote 12V power supply required. MVOLT is standard on all fluorescent lamps and metal halide lamps with GEB ballast option. SF only valid with 120V, 277V or 347V. DF only valid with 208V, 220V, or 240V. Only valid with metal halide lamps. WWD only valid with T4 lamps and fluorescent lamps. Only available with WWD, ASY or MFL distributions. Only available with NSP or MFL distributions. Only available with MVOLT. Not available with LED. Only valid with LED.

HYDREL

Height:

1 2 3 4

659

FLOOD

Floodlighting

PRODUCT INFORMATION Intended Use The 7000 Series floodlight is a compact, high-performance outdoor fixture used for facade and landscape lighting.

7000

Construction Material: Die-cast aluminum housing and door. Finish: Polyester powder coated in a range of textured or semi-matte finishes. Fasteners: Stainless steel. Weight: 20 lbs.

Optics Lens: Flat tempered glass. Reflector: High-purity anodized specular, semi-specular or patterned lighting sheet in various configurations designed to provide maximum performance and uniformity. Electrical Lamp: Incandescent – T4, mini-can to 100W. Fluorescent – TRT triple-tube lamps to 42W. HID – T6, G12 to 70W; E17 medium-base to 70W.

EPA: 0.64.

Lamp type

Voltage 1

7000

Socket – Incandescent – Mini-can screw base. Fluorescent – 4-pin, GX24Q base. HID – G-12, medium, or E27 base pulse-rated 4KV. Electrical components: Integrally mounted ballasts rated for low temperatures. Listings U.L., C.U.L., IP65, suitable for wet locations.

Example: 7000 70M 120 FL YM SMSA18 BD LPI BL

ORDERING INFORMATION Series

Note: All lamps must be rated for "Universal Burning Position" because fixture tilt changes lamp orientation.

Incandescent 100Q Fluorescent2 26TRT 32TRT 42TRT

T4, MC GX24Q-3 GX24Q-3 GX24Q-3

Metal halide 50M E17, medium 70M E17, medium Ceramic metal halide 70CM E17, medium 35CMT6 T6, G12 70CMT6 T6, G12

Options 8

Internal accessories ISS Internal source shield5 IHL Internal honeycomb louver6, 7 CFAMB Color filter amber7 CFRED Color filter red7 CFBLU Color filter blue7 CFGRN Color filter green7 ADDITIONAL INFORMATION

External accessories BD Barn doors GS Glare shield

High pressure sodium 35S E17, medium1 50S E17, medium 70S E17, medium

120 208 240 277 347 120/277 MVOLT2 TB

Distribution TSP NHSP MFL FL

Lamped

Finish

LPI Lamp included

BL BZ DDB DNA GN GR SND

Tight spot Narrow horizontal spot3 Medium flood3 Flood4

Black Bronze Dark bronze Natural aluminum Green Gray Sand

Mounting

Mounting accessories

KM Knuckle mount YM Yoke mount

See page 664.

STG TVG WH CF

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

6 (15.2)

11-3/4 (29.8)

Knuckle Mount

8-1/4 (21.0) 5-3/4 (14.6)

13-7/8 (35.2)

11-3/4 (29.8)

HYDREL

Yoke Mount

660

Notes 1 Available in 120V only. 2 MVOLT is the standard voltage for fluorescent lamps. 3 Available with T6 and T4 lamps only. 4 Available with E17 and TRT lamps only. 5 Available with TSP and MFL distributions only. 6 Available with FL distribution only. 7 Not available with NHSP. 8 Accessories are mutually exclusive. Choose one. *Mounting not included.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use The 7100 Series floodlight is a compact, high-performance outdoor fixture used for facade and landscape lighting. Construction Material: Die-cast aluminum housing and door.

Optics Reflector: High-purity anodized specular, semi-specular, patterned lighting sheet in various configurations designed to provide maximum performance and uniformity.

Note: All lamps must be rated for "Universal Burning Position" because fixture tilt changes lamp orientation. Socket: Incandescent – Recessed single contact (RSC), mini-can screw base. HID – G12, medium or E27 base pulse-rated 4KV.

Lens: Flat tempered glass standard.

Finish: Polyester powder coated in a range of textured or semi-matte finishes.

Electrical Lamp: Incandescent – T3, RSC quartz to 500W; T4, minican to 250W. HID – T6, G12 to 150W, E17 medium-base to 150W; elliptical, E27 to 150W.

Fasteners: Stainless steel. Weight: 37 lbs.

360° rotation); fixed mounted for ceiling or wall. Knuckle mount – Die-cast aluminum with 3/4" NPT galvanized nipple standard. Yoke mount – Aluminum with 10' of 18-3 STW flexible cord polymer. Yoke mount caps have black finish.

EPA: 1.27.

7100

Listings U.L., C.U.L., IP65, suitable for wet locations.

Electrical components: Integrally mounted ballasts rated for low starting temp. Installation Mounting: Knuckle or yoke mounted (180° vertical,

Example: 7100 150M 120 VFL KM WMSA BD SF LPI BL

ORDERING INFORMATION Series

Lamp type

7100

Voltage

Incandescent 250Q T4, MC 300Q T3, RSC 400Q T3, RSC 500Q T3, RSC Metal halide 70M E17, medium 100M E17, medium 150M E17, medium

Ceramic metal halide 70CM E17, medium 70CMT6 T6, G12 100CM E17, medium 150CM E17, medium 150CMT6 T6, G12 70CMTD T7, RSC 150CMTD T7, RSC

High pressure sodium 50S E17, medium 70S E17, medium 100S E17, medium 150S E17, medium

120 208 220 240 277 347 120/277 TB

Distribution NSP NHSP SP HSP HFL VFL WFL

ADDITIONAL INFORMATION

External accessories BD Barn doors GS Glare shield5 LC Polycarbonate cover5 Fusing SF Single fuse6 DF Double fuse7

Narrow spot Narrow horizontal spot2 Spot Horizontal spot Horizontal flood2 Vertical flood Wide flood

Options Internal accessories ISS Internal source shield3 CFAMB Color filter amber CFRED Color filter red CFBLU Color filter blue CFGRN Color filter green

FLOOD

Floodlighting

PRODUCT INFORMATION

Re-strike QRS Quartz emergency re-strike ballast8 QRSTD Quartz emergency re-strike time delay8 Photo control PE Photo eye

Mounting

Mounting accessories

KM YM

Knuckle mount Yoke mount

See page 664.

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Lamped

Finish

LPI Lamp included

BL BZ DDB DNA GN GR SND

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 6-3/4 (17.1) 9-1/4 (23.5)

16-1/2 (41.9)

13-1/4 (33.7)

18-1/2 (47.0) 6-3/4 (17.1)

15-3/4 (40.0)

Knuckle Mount

Yoke Mount

www.hydrel.com | 1-800-750-9773

Notes 1 2 3 4 5 6 7 8

Available with 70CMT6, 150CMT6 and 250Q lamps only. Not available with RSC base lamps. Not available with VFL or WFL distributions. Accessories are mutually exclusive. Choose one. Not available with CM mounting. Available with 120V, 277V or 347 HID only. Available with 208V, 220V or 240V HID only. Not available with NSP, WFL and HSP distribution.

HYDREL

PSG10

15-3/4 (40.0)

661

FLOOD

Floodlighting

PRODUCT INFORMATION Intended Use The 7200 Series floodlight is a high-performance fixture used for facade and area lighting.

7200 400W max.

Optics Reflectors: High-purity anodized specular, semi-specular, or patterned lighting sheet in various configurations designed to provide optimum optical performance. Reflectors are interchangeable using four screws and quick-release electrical connectors (with the exception of spot reflectors). Reflectors include both segmented and hydroformed types to provide maximum performance and uniformity.

Construction Material: Die-cast aluminum housing and door. Finish: Polyester powder coated in a range of textured semi-matte finishes. Fasteners: Stainless steel. Weight: 50 lbs. EPA: 3.00.

Lens: Flat tempered glass.

7200

Lamp type 1

Metal halide 200M2, 11 250M 320M12 350M2, 12 400M High pressure sodium 250S 400S

Electrical components: Integrally mounted ballasts rated for low temperatures. Installation Mounting: Knuckle or yoke mounted (180째 vertical, 360째 rotation) on pole, stanchion, wall or tenons. Listings U.L., C.U.L., IP65, suitable for wet locations.

Voltage

Distribution

Mounting

Mounting accessories

Options

120 208 240 277 347 120/277 TB

NHSP SP HSP HFL VFL WFL

KM Knuckle mount YM Yoke mount

See page 664.

Internal accessories ISS Internal source shield3 CFAMB Color filter amber CFRED Color filter red CFBLU Color filter blue CFGRN Color filter green External accessories4 BD Barn doors

Narrow horizontal spot Spot Horizontal spot Horizontal flood Vertical flood Wide flood

Options (continued)

Lamped

Ballast SCWA Super CWA pulse start10 Re-strike QRS Quartz emergency re-strike ballast9

ADDITIONAL INFORMATION

Socket: Porcelain mogul base rated 5KV.

Example: 7200 400M 277 WFL KM EWM24 SCWA LPI BZ

ORDERING INFORMATION Series

Electrical Lamp: HID to 400W.

LPI LPIH LPIV

GS Glare shield LC Polycarbonate cover EGL Ext. grid louver5 Fusing SF Single fuse6 DF Double fuse7 Receptacle PER Photocell receptacle8

Finish Lamp included Lamp included (horizontal burn)12 Lamp included (vertical burn)11, 12

BL BZ DDB DNA GN GR SND

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

10-3/8 (26.4)

21-5/8 (54.3)

14-1/2 (36.7)

17-5/8 (44.8)

27-1/2 (69.9)

HYDREL

23-3/8 (59.4)

662

Knuckle Mount

23-3/8 (59.4) Yoke Mount

14-1/2 (36.7)

Notes 1 2 3 4 5 6 7 8 9 10 11 12

Available only with SCWA ballast. 200M and 350M are not available with SP distribution. Not available with WFL distribution. Accessories are mutually exclusive. Choose one. EGL accessory available in matte black finish only. Available with 120V, 277V or 347V HID only. Available with 208V, 240V or 480V HID only. NEMA twist-lock receptacle only; photocontrol by others. Not available with TB, NHSP, SP, WFL or HSP. Required on 200M, 250M, 320M, 350M or 400M. LPIV required on 200M. LPIH or LPIV required on 320M or 350M.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use The 7200 Series flood is designed for use in facade and area lighting. Construction Material: Die-cast aluminum housing and door. Finish: Polyester powder coated in a range of textured or semi-matte finishes. Fasteners: Stainless steel. Weight: 40 lbs. Head only; does not included ballast.

Optics Reflectors: High-purity anodized specular, semi-specular or patterned lighting sheet in various configurations to provide optimum optical performance. Reflectors are interchangeable using four screws and quick-release electrical connectors (with the exception of spot reflectors). Reflectors include both segmented and hydroformed types to provide maximum performance and uniformity.

Electrical Lamp: HID to 1000W.

7200 1000W max.

Socket: Porcelain mogul base rated 5KV. Electrical components: Externally mounted ballasts rated for low starting temp. Ballast box must be specified. Listings U.L., C.U.L., IP65, suitable for wet locations.

Lens: Flat tempered glass.

EPA: 3.00.

Example: 7200 1000M 120 VFL KM SMB GS LPI BZ

ORDERING INFORMATION Series 7200

Lamp type 12

750M 1000M 1000S

Voltage

Distribution

Mounting

Mounting accessories

Options

120 208 240 277 347 120/277 TB

NHSP SP HSP HFL VFL WFL

KM Knuckle mount YM Yoke mount

SMB SMBEWM SMBPMT SMBSMSA SMBSMT SMBTNM SMBR

Internal accessories ISS Internal source shield4 External accessories5 BD Barn doors GS Glare shield EGL Ext. grid louver6

Options (continued) Fusing SF Single fuse7 DF Double fuse8 Photocontrol PER Photocell receptacle9 Ballast SCWA Super CWA pulse-start11 Re-strike QRS Quartz emergency re-strike ballast10 ADDITIONAL INFORMATION

FLOOD

Floodlighting

PRODUCT INFORMATION

Narrow horizontal spot Spot Horizontal spot Horizontal flood Vertical flood Wide flood

Lamped

Finish

LPI Lamp included

BL BZ DDB DNA GN GR SND

Surface mounted ballast SMB extended wall mount Pole mount tee2 SMB stanchion mount SMB stanchion mount tee2 SMB tenon mount3 SMB remote mount

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

10-3/8 (26.4)

21-5/8 (54.3)

14-1/2 (36.7)

17-5/8 (44.8)

27-1/2 (69.9)

23-3/8 (59.4)

PSG10

www.hydrel.com | 1-800-750-9773

Yoke Mount

Notes 1 2 3 4 5 6 7 8 9 10 11 12

If not selected, fixture will ship less ballast. Two fixtures per mount. For use with KM only. Not available with WFL distribution. Accessories are mutually exclusive. Choose one. EGL available in matte black finish only. Available with 120V, 277V or 347V only. Available with 208V or 240V only. NEMA twist-lock receptacle only; photocontrol by others. Not available with 480V or TB, NHSP, SP, WFL or HSP distribution. SCWA required in 750M, optional om 1000M. 750M not available with SP or HFL distribution.

HYDREL

Knuckle Mount

23-3/8 (59.4)

14-1/2 (36.7)

663

FLOOD

Accessories

PRODUCT INFORMATION

7000 SERIES Accessories

7100 4 (10.2)

7000 2-3/8 (6.0)

4 (10.2)

1-3/4 (4.5)

2-3/8 (6.0)

11-3/4 (29.8)

6 (15.2)

6 (15.2) GS Glare Shield

BD Barn Doors

15-3/4 (40.0)

9-3/4 (24.8)

GS Glare Shield

BD Barn Doors

LC Polycarbonate Cover

7200 14 (35.6)

11-3/8 (28.9) 2-5/8 (6.7)

16-3/4 (42.5)

5-3/8 (13.7)

22-7/8 (58.1) BD Barn Door

EG Eternal Grid Louver

10 (25.4)

14 (35.6)

4 (10.2)

22-7/8 (58.1)

5-3/8 (13.7)

22-7/8 (58.1)

LC Lexan Covers

GS Glare Shield

NOM.

FJB

PMSA

PMT

SMSA

TRJB

EWM

PAR

PAS

PATR

PATS

SMB

SMBEWM

SMBSMSA

SMBSMT

SMBPMT

SMBTNM

SMBR

Adjustable

Knuckle

N1, 2

7000

Adjustable

Yoke

N1, 2

7100

Adjustable

Knuckle

N1, 2

7100

Adjustable

Yoke

N1, 2

7100

Fixed

Wall Side/ Down/Up

WMS/ WUS

7100

Fixed

Ceiling

Adjustable

Knuckle

N1, 2

Adjustable

Yoke

N1, 2

Adjustable

Knuckle

Adjustable

Yoke

HYDREL

7200 400W 7200 400W 7200 1000W 7200 1000W

664

ARJB FJB PMSA PMT

Architectural junction box Flush mount juction box Pole mount Pole mount tee

SMSA HYDSMDB TRJB EWM

Stanchion mount Stanchion mount direct burial Tree mount junction box Extended wall mount

TNM PAR PAS PATR

Tenon mount Pole arm round Pole arm square Pole arm twin round

TNM

MOUNT

HYDSMDB

TYPE

N/A

SERIES 7000

ARJB

MOUNTING ACCESSORIES3

PATS SMB SMBEWM SMBSMSA

Pole arm twin square Surface mounted ballast SMB extended wall mount SMB stanchion mount

SMBSMT SMBPMT SMBTNM SMBR

SMB stanchion tee mount SMB pole mount tee SMB tenon mount SMB remote mount

Notes 1 Two fixtures per mounting. 2 Multiple lengths available, consult specification sheets. 3 For more mounting information, see pages 669 and 676-677.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use The 8100 Series is a highperformance compact precision lighting system that provides consistent styling with a variety of light distributions. Multiple optical systems provide a wide range of precise light control. For use in facade, area and pathway lighting.

Weight: 26.5 lbs. max.

quartz T4 mini-can base to 250W.

EPA: 1.41. Optics Reflector: High-purity anodized specular, semi-specular or patterned lighting sheet in various configurations to provide optimum optical performance and uniformity. Lens: Flat tempered glass for maximum resistance to impact and thermal shock.

Construction Material: Die-cast, copperfree aluminum (A360) housing and doors.

Electrical Lamp: ED17 medium-base to 150W, T6, G12 base to 150W;

Finish: Textured TGIC powder coat polyester finish.

Ballast: High power factor magnetic core and coil standard. Electronic ballast optional. Installation Mounting: AWM – cast aluminum wall mount plate for mounting over 4-0/4-S recessed J-box. AWMDE – surface conduit direct entry available for through-branch wiring; 3/4" NPT drilling standard. PM – steel mounting plates for attachment to pole using a unique block/receiver assembly. The block bolts

to a pole and engages the receiver within the 8100 integral arm. A single threaded locking fastener secures the fixture to pole. YM – 1-1/2" wide aluminum yoke, 15° up/ down adjustment and stainless steel locking hardware allows fixture head to easily be aimed and fixed in place. Fixtures are provided with a minimum of 10' of 18/3 STW cord for power supply.

8100

FLOOD

Floodlighting

PRODUCT INFORMATION

Listings U.L., C.U.L., IP67.

Example: 8100 150M MVOLT NFL YM SMSA18 BD GEB LPI BL

ORDERING INFORMATION Series

Lamp type

8100

Incandescent 100Q T4, mini can 150Q T4, mini can 250Q T4, mini can Fluorescent1 42TRT G24Q-3 2/42TRT G24Q-3

Metal halide 50M ED17, medium 70M ED17, medium 100M ED17, medium 150M ED17, medium Ceramic metal halide 70CMT6 T6, G12 150CMT6 T6, G12

High pressure sodium 50S ED17, medium 100S ED17, medium 150S ED17, medium

Voltage

Distribution

120 208 240 277 347 120/277 TB MVOLT2

Floodlights3 NSP Narrow spot4 SP Spot NFL Narrow flood MFL Medium flood FL Flood WFL Wide flood VWFL Vertical wide flood5

Options 7

Internal accessories ISS Internal source shield6 LSF Linear spread filter VSF Vertical spread filter CFAMB Color filter amber CFRED Color filter red CFBLU Color filter blue CFGRN Color filter green

External accessories BD Barn doors FGS Full glare shield HGS Half glare shield HS House side shield8 WRG Wire rock guard Photocontrol PER Photocell9

ADDITIONAL INFORMATION

Fusing SF DF Ballasts GEB MLEBAD EL N EL NICE

Single fuse10 Double fuse11

Mounting accessories

Mounting Area lights SR2 IES type II SR3 IES type III SR4SC IES type IV SR5S IES type V

AWM Adj. wall mount AWMDE Adj. wall mount, direct entry YM Yoke mount PMEF Pole mount flat, square pole PME3 Pole mount 3" diameter, round pole PME4 Pole mount 4" diameter, round pole

Lamped

Finish

LPI Lamp included

BL BZ DDB DNA GN GR SND

Electronic ballast12 Electronic analog dimming12, 13 Battery backup (for (2) 42TRT only)5 Battery backup for operation in low temperature conditions (for (2) 42TRT only)5

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

See page 668.

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

8-1/8 (20.6)

5-1/8 (13.0) 14-3/4 (37.5)

10 (25.4)

5-1/8 (13.0)

14-1/8 (35.7)

D.E. (direct entry) Adjustable Wall Mount Yoke Mount

12-1/4 (31.1) 5-1/8 (13.0) 10 (25.4)

17-1/4 (43.8)

PSG10

www.hydrel.com | 1-800-750-9773

Notes 1 Available with flood (FL) distribution. 2 MVOLT is standard on all fluorescent lamps (unless ELN is selected) and metal halide lamps with GEB or MLEBAD option. 3 Floodlight distributions are not available with PMEF, PME3 or PME4. 4 Available for G12 and mini-can bases only. NSP = spot distribution with ISS. 5 Only available with 2/42TRT. 6 Not available with SR2, SR3, SR5; standard on NSP and SR4SC. 7 Accessories are mutually exclusive. Choose one. 8 HS only available with SR2 and SR3 distributions and not available with yoke mount. 9 PE not available with yoke mount. 10 SF is available with 120V, 277V or 347V on HID only. 11 DF is available with 208V, 220V or 240V on HID only. 12 Electronic ballasts only are available with metal halide lamps (150W max.) and MVOLT voltage. 13 0-10V dimmer not included.

HYDREL

Pole Mount

8-1/8 (20.6)

665

FLOOD

Floodlighting

PRODUCT INFORMATION Intended Use The 8100 EO Series is a high-performance emergency compact fluorescent lighting system. Recommended applications are areas along the path of egress, educational, athletic fields, health care and commercial facilities needing standby of emergency illumination. For use in facade, area and pathway lighting.

8100 Emergency Only

Construction Material: Die-cast, copperfree aluminum (A360) housing and doors. Finish: Textured TGIC powder coat polyester finish.

Weight: 25 lbs. EPA: 1.5. Electrical Lamp: Two 42W Gx24q-4 base compact fluorescent lamps. Illumination time: 90 minutes.

Charging indicator light: LED.

Total lumen output: 6400 lumens.

Input voltage: 120V or 277V, 60Hz.

Test switch: Single pole.

Installation Mounting: YM – 1-1/2" wide aluminum yoke and stainless steel locking hardware allows fixture head to easily be aimed and fixed in place. Fixtures are provided with a minimum of 10' of 18/3 STW

Recharge time: 24 hours. Operation: When the normal supply of AC power fails, the 8100 EO instantly switches to the emergency mode, keeping two compact fluorescent

Lamp Emergency type

8100

Fluorescent 2/42TRT

ADDITIONAL INFORMATION

cord for power supply. AWM – Cast aluminum wall mount plate for mounting over 4-0/4-S recessed junction box. 15° up/down adjustment. AWMDE – Surface conduit direct entry available for through-branch wiring; 3/4" NPT drilling standard. PM – Steel mounting plates for attachment to pole using a unique block/receiver assembly. The block bolts to a pole and engages the receiver within the 8100 integral arm. A single threaded locking fastener secures the fixture to pole. Listings U.L., C.U.L., IP67.

Example: 8100 EO 2/42TRT 120 FL YM LPI BL

ORDERING INFORMATION Series

lamps illuminated for a minimum of 90 minutes at full output. When AC power is restored the emergency system returns to the normal mode. Ambient temperature -20°C to 55°C with ICE option.

Voltage

Distribution

Mounting

120 277

FL Flood

AWM Adj. wall mount AWMDE Adj. wall mount, direct entry YM Yoke mount PME3 Pole mount 3" diameter, round pole PME4 Pole mount 4" diameter, round pole

Mounting accessories

Options

Lamped

Finish

See page 668.

ICE

LPI Lamp included

BL BZ DDB DNA

For low-ambient conditions RTSW Remote test switch

Black Bronze Dark bronze Natural aluminum GN Green GR Gray SND Sand

STG Steel gray TVG Terra verde green WH White CF Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 10 (25.4)

5-1/8 (13.0) 10 (25.4)

14-3/4 (37.5) D.E. (direct entry)

14-1/8 (35.7)

Yoke Mount

12-1/4 (31.1) 5-1/8 (13.0) 10 (25.4)

17-1/4 (43.8) Pole Mount

HYDREL

Adjustable Wall Mount

5-1/8 (13.0)

666

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use The 8200 Series is a highperformance precision lighting system that provides consistent styling with a variety of light distributions. Multiple optical systems provide a wide range of precise light control. For use in facade, area and pathway lighting.

Weight: 29.5 max.

Construction Material: Die-cast, copperfree aluminum (A360) housing and doors.

Lens: Flat tempered glass for maximum resistance to impact and thermal shock.

Finish: Textured TGIC powder coat polyester finish (see ordering guide for available colors).

Electrical Lamp: ED18, ED28 or T15 HID to 400W maximum. Mogul or E40 sockets.

Ballast: High power factor magnetic core and coil standard. Electronic ballast optional.

EPA: 1.45. Optics Reflector: High-purity anodized specular, semi-specular or patterned lighting sheet in various configurations to provide optimum optical performance and uniformity.

Installation Mounting: AWM – Cast aluminum wall mount plate for mounting over 4-0/4-S recessed junction box. 15° up/ down adjustment. AWMDE: Surface conduit direct entry available for through-branch wiring; 3/4" NPT drilling standard. PM – Steel mounting plates for attachment to pole using a unique block/receiver assembly. The block bolts to a pole and engages the receiver within the 8200 integral arm.

A single threaded locking fastener secures the fixture to the pole. YM – 1-1/2" wide aluminum yoke and stainless steel locking hardware allows fixture head to be easily aimed and fixed in place. Fixtures are provided with a minimum of 10' of 18/3 STW cord for power supply.

8200

Listings U.L., C.U.L., IP67.

Example: 8200 250M 120 SR2 AWM HS LPI SND

ORDERING INFORMATION Series

Lamp type

Voltage

Distribution

8200

Metal halide1 200M 250M 320M 350M 400M High pressure sodium11 250S 400S

120 208 240 277 347 120/277 TB MVOLT2

Floodlights3 SP Spot NFL Narrow flood MFL Medium flood FL Flood WFL Wide flood HSP Horizontal spot VFL Vertical flood HFL Horzontal flood

Area lights SR2 IES type II SR3 IES type III SR4SC IES type IV SR5S IES type V

Options (continued) 5

External accessories (continued) FGS Full glare shield HGS Half glare shield HS House side shield6 WRG Wire rock guard Photocontrol PER Photocell receptacle12 ADDITIONAL INFORMATION

FLOOD

Floodlighting

PRODUCT INFORMATION

Fusing SF DF Ballasts GEB SCWA

Mounting

Mounting accessories

Options

AWM AWMDE YM PMEF PME3 PME4

See page 668.

Internal accessories5 ISS Internal source shield4 CFAMB Color filter amber CFRED Color filter red CFBLU Color filter blue CFGRN Color filter green External accessories5 BD Barn doors

Adj. wall mount Adj. wall mount, direct entry Yoke mount Pole mount flat, square pole Pole mount 3" diameter, round pole Pole mount 4" diameter, round pole

Lamped

Finish

LPI Lamp included

BL BZ DDB DNA GN GR SND

Single fuse7 Double fuse8 Electronic ballast9 Super CWA pulse start10

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 15 (39.4)

20-1/8 (51.1)

20-3/4 (52.7)

Notes D.E. (direct entry)

Adjustable Wall Mount 22-3/4 (57.8) 7-3/8 (18.7) 17-3/4 (45.1)

Pole Mount

PSG10

www.hydrel.com | 1-800-750-9773

Yoke Mount

1 2 3 4 5 6 7 8 9 10 11 12

SCWA standard. MVOLT is the default if GEB is selected; only valid on metal halide lamps. Flood light distributions not available with PMEF, PME3 and PME4 mountings. ISS comes standard on the VFL and SR4SC distributions. ISS is not available with FL, HFL, WFL, SR2, SR3 and SR5S distributions. Accessories are mutually exclusive. Choose one. HS available with SR2 and SR3 distributions only. SF is available with 120V, 277V or 347V on HID only. DF is available with 208V, 220V or 240V on HID only. Electronic ballasts are only available with metal halide lamps 250-400W, 208-277V only. SCWA ballasts are required with metal halide lamps. Not valid with SR2, SR3, SR4SC or SR5S. NEMA twist-lock receptacle only; photocontrol by others.

HYDREL

15-1/2 (39.4)

13-1/2 (34.3)

7-3/8 (18.7) 15-1/2 (39.4)

7-3/8 (18.7)

667

FLOOD

Accessories

PRODUCT INFORMATION

8100 & 8200 SERIES Accessories

BD Barn doors Four door set; each door mounts independently.

FGS Full glare shield 360째 full cutoff.

HS House side shield cuts nuisance glare.

HGS Half glare shield cuts upward glare.

ISS Internal source shield eliminates lamp source glare.

WRG Wire guard for additional safety protection.

MOUNTING ACCESSORIES3 SERIES

TYPE

MOUNT

NOMENCLATURE

8100

Adjustable

Yoke

8100

Adjustable

Wall

AWM/AWMDE

8100

Fixed

Pole

PMEF/PME3/PME4

8200

Adjustable

Yoke

8200

Adjustable

Wall

AWM/AWMDE

8200

Fixed

Pole

PMEF/PME3/PME4

HYDREL

ARJB FJB PMSA PMT

668

Architectural junction box Flush mount juction box Pole mount Pole mount tee

HYDSMDB TRJB EWM PAR

N/A

ARJB

FJB

PMSA

PMT

HYDSMDB

TRJB

EWM

PAR

PAS

PATR

PATS

Stanchion mount direct burial Tree mount junction box Extended wall mount Pole arm round

PAS PATR PATS SMSA_

1, 2

N1, 2

SMSA_

1, 2

N1, 2

Pole arm square Pole arm twin round Pole arm twin square Standard mounting splice access available in 12"- 48" in 6" increments

Notes 1 Two fixtures per mounting. 2 Multiple lengths available; consult specification sheets. 3 For more mounting information, see pages 669 and 676-677.

1-800-750-9773 | www.hydrel.com

PSG10

27-1/2 (69.9)

6-1/2 (16.5)

10-1/2 (26.7) 6-1/2 (16.5)

6-1/2 (16.5) 19 (48.3)

8-1/4 (30.0) Knuckle

8-1/4 (30.0)

18-1/4 (46.4)

9-1/2 (24.1)

Yoke

18-1/4 (46.4)

9-1/2 (24.1) Yoke

Knuckle

SMBEWM Extended Wall Mount

SMBTNM Tenon Mount

19 (48.3)

MOUNTING ACCESSORIES

SMB Mounting

PRODUCT INFORMATION

8-1/4 (30.0) 6-1/2 (16.5)

8-1/4 (30.0)

6-1/2 (16.5)

19 (48.3)

8-1/4 (30.0)

19 (48.3)

Yoke

Knuckle

6-1/2 (16.5)

SMBR Remote Mount

(Can be used for a wide variety of mounting placements.)

SMB SMB Ballast

6-1/2 (16.5)

22 (55.9)

38 (96.5)

8-1/4 (30.0) Knuckle

6 (15.2)

6 (15.2) 38 (96.5)

Yoke

SMBSMT Stanchion Tee Mount

9-1/2 (24.1) 31-1/4 (79.4)

9-1/2 (24.1)

38 (96.5)

Yoke

8-1/4 (30.0)

9-1/2 (24.1) 9-1/2 (24.1) 6-1/2 (16.5)

31-1/4 (79.4)

SMBSMSA Stanchion Mount

PSG10

www.hydrel.com | 1-800-750-9773

38 (96.5)

Knuckle

SMBPMT Pole Tee Mount

8-1/4 (30.0)

HYDREL

Knuckle

669

MOUNTING ACCESSORIES

Accessories

PRODUCT INFORMATION

POLES ORDERING INFORMATION Type HYDSSAG2 HYDSSA HYDSSS HYDRSA HYDRSS

Square, straight, aluminum, G2 Square, straight, aluminum Square, straight, steel Round, straight, aluminum Round, straight, steel

Fixture mounting methods1

Height

Nominal shaft base size/Wall thickness

Specify height, see Configurations table below.

Nominal shaft base size 3.75 4 4.5 5 6

Options

Mounting PT Open top Tenon mounting T20 2-3/8” O.D. T25 2-7/8” O.D. G2XTEND drill mounting DM19G2 Single luminaire drilling DM28G2 Two luminaires at 180° DM29G2 Two luminaires at 90° DM39G2 Three luminaires at 90° DM49G2 Four luminaires at 90° ADDITIONAL INFORMATION

Example: HYDDSSAG2 16 3.75J T20 DDB

Poles: For detailed technical information, EPAs and wind map, please visit www.hydrel.com.

8100/8200 PM drill mounting DM19AS Single luminaire drilling DM28AS Two luminaires at 180° DM29AS Two luminaires at 90° DM39AS Three luminaires at 90° DM49AS Four luminaires at 90°

PER L/AB VD TP H __ FDL _ FGL _ HH __

Wall thickness B .120 C .125 E .156 G .188 J .250

Finish NEMA twist-lock receptacle only located at pole top2 Less anchor bolts Vibration damper Tamper-proof screws provided with base cover Horizontal arm3, 4 Festoon duplex outlet less electrical3 Festoon GFI outlet less electrical3 Extra handhole3, 5

Standard colors BL Black BZ Bronze DDB Dark bronze DNA Natural aluminum GN Green GR Gray SND Sand STG Steel gray TVG Terra verde green WH White

Designer colors DBLB Designer black, textured DSPD Dark gray, textured DNAT Natural aluminum, textured DWHG Designer white, textured DDBT Dark bronze, textured DSPF Rust, textured DSST Sandstone, textured CF Custom

For additional product information, visit www.hydrel.com.

CONFIGURATIONS POLE HEIGHT (FT) NOMINAL SHAFT BASE SIZE HYDSSAG2 10 - 16 3.75 HYDSSA 8 - 35 4, 5, 6 HYDSSS 10 -39 4, 5, 6 HYDRSA 8 - 30 4, 4.5, 5, 6 HYDRSS 8 - 35 4, 4.5, 5 HYDSSA

WALL THICKNESS J C, G, J C, G C, E, G B HYDSSS

HYDRSA

Nut cover disc

18"

HYDREL

HYDRSS

670

18"

NOTES: 1 When ordering tenon mounting and drill mounting for the same pole, follow this example: DM28G2/T20. The combination requires an extra handhole. 2 NEMA twist-lock photocontrol by others. Not available with tenon mounting. 3 Must specify location and orientation when ordering an option. For first space _ : Specify the height in feet above base of pole. Example: 5' = 5 and 20'= 20 For second space _ : Specify orientation from handhole (A,B,C,D). Refer to the handhole orientation diagram on this page. 4 Horizontal arm is 18” x 2-3/8” O.D. tenon standard. 5 Combination of tenon-top and drill mount requires extra handhole. CAUTION: This pole selection process is a guideline only. Hydrel® and Acuity Brands® assume no responsibility for selection, and we recommend consultation with qualified individuals for verification of luminaire/pole assembly selection.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use The 2100 Series is a compact, high-performance lighting fixture available with incandescent or HID lamp types. Several ideal distributions are offered for a wide variety of applications. The 2100 Series yoke-mounted unit also includes multiple mounting accessories.

Lens: High-strength curved, tempered glass.

Construction Material: Rugged heavy wall cast aluminum body and hinged door. All fasteners are stainless steel.

Socket: Mini-can, screw shell or G12 base, bi-pin.

Finish: Textured TGIC powder coat polyester finish (see ordering guide for available colors. Electrical Lamp: Incandescent â&#x20AC;&#x201C; T4 mini-can to 250W max. Metal halide â&#x20AC;&#x201C; T6, G12 to 150W max.

Installation Mounting: Yoke mount with a minimum of 10' 18/3 STW cord. Cord length must be specified. Listings U.L., C.U.L., suitable for wet locations.

Example: 2100 70CMT6 120 RN YM RACB GS SF CSL10 LPI BL

ORDERING INFORMATION Series

Lamp type 1

Incandescent 100Q 150Q 250Q Ceramic metal halide2 35CMT6 70CMT6 150CMT6

2100

FLOOD

Floodlighting

PRODUCT INFORMATION

Voltage

Distribution

Mounting

Mounting accessories

Options

120 208 240 277 347 120/277 MVOLT3 TB

RN Rectangular narrow RM Rectangular medium RW Rectangular wide

YM Yoke mount

See page 675.

External accessories4 FGS Full glare shield GS Half glare shield VSR Visor

Cord set length CSL_ 10'-50' of cord (available in 5' increments)

ADDITIONAL INFORMATION

Lamped

Finish

LPI Lamp included

BL BZ DDB DNA GN GR SND

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Fusing SF DF Ballasts7 GEB MLEBAD

Single fuse5 Double fuse6 Electronic ballast Electronic dimming ballast8

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4 (10.2)

7-3/4 (19.7) 5-3/4 (14.6)

8-3/4 (22.2)

5-1/2 (14.0

Notes

PSG10

www.hydrel.com | 1-800-750-9773

Available in 120V only. Requires HID ballast enclosure. MVOLT is standard on all metal halide lamps with GEB ballast option. Accessories are mutually exclusive. Choose one. SF is available with 120V, 277V or 347V on HID only. DF is available with 208V or 240V on HID only. Only available with 35CMT6 and 70CMT6 with MVOLT voltage. For use with 0-10V analog dimmer (by others). Additional electrical conductors are required.

HYDREL

1 2 3 4 5 6 7 8

671

FLOOD

Linear Floodlighting

PRODUCT INFORMATION Intended Use Hydrel's 4740 compact fluorescent lighting fixture brings fluorescent lamp performance to smaller outdoor applications. These are ideal for soft, even illumination within smaller planters, and along walls and signs.

4740 Compact Fluorescent

Construction Material: Extruded aluminum with die-cast aluminum end caps. Cord: Supplied with a minimum of 10' of 18-3 cable. Cord length must be specified.

Fasteners: Stainless steel. Optics Distribution: WFL – wide flood. Lens: Polycarbonate. Electrical Lamp: One (1) compact fluorescent, 32W Max. For 42W please consult factory. Socket: GX24Q 4-pin. Ballast: Electronic multi-volt, 0°F (-18°C) minimum starting temperature.

Installation YM: Yoke mount. Listings U.L., CUL. Note: Hydrel reserves the right to modify specifications without notice. Any dimension on this sheet is to be assumed as a reference dimension: "Used for information purposes only. It does not govern manufacturing or inspection requirements." (ANSI Y14.5-1973.)

Example: 4740 32TRT MVOLT WFL YM ARJB FVSR CSL30 LPI DDB

ORDERING INFORMATION Series

Lamp type

Voltage

Distribution

Mounting

Mounting accessories

Options

4740

Fluorescent 26TRT GX24Q-3 32TRT GX24Q-3

MVOLT

WFL Wide flood

YM Yoke mount

ARJB WMP WMSA EWM_ PSSA PMSA SMSA_ FJB PSS_

External accessories FVSR Full visor HVSR Half visor TPH Tamper-proof hardware

Cord set length CSL_ 10' - 50' of cord, available in 5' increments

ADDITIONAL INFORMATION

Arch. J-box Wall-mount plate Wall-mount with splice access Extended wall mount 1 Pedestal stanchion-mount Pole-mount with splice access 12" - 48" stanchion-mount; available in 6" increments 1 Flush junction box 18", 24" or 36" polymer sealed ground spike 1

Lamped

Finish

LPI Lamp included

BL BZ DDB DNA GN GR SND

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Steel gray Terra verde green White Custom finish

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 10-1/4 (26.0) 4-1/2 (11.4)

HYDREL

12 (30.5)

672

4 (10.2)

Notes 1 Multiple lengths available, consult specification sheets .

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use T5 and T5HO lamp performance, high-output symmetrical and asymmetrical distributions and simple design, make the Hydrel 4750 Series ideal for spreading soft, even illumination along walls, signs and planters.

Optics Distribution: Wall wash, narrow flood, medium flood, vertical flood and wide flood.

Construction Material: Extruded A360 aluminum with die-cast aluminum end caps. All fasteners are stainless steel.

Electrical Lamp: Fluorescent, single or multiple T5 and T5HO to 54W per lamp.

Lens: Curved high-strength, optical-grade clear acrylic. External glare control available.

Socket: G5 miniature bi-pin.

Voltage: Multi-volt (120V-277V 50/60 Hz) or 347V available. Ballast: Electronic multi-volt, -20°F (-29°C) minimum starting temperature with CW20 ballast option. Polarpack® cold weather options available. Polarpack® option will consume up to 19W when operating.

Adjustable wall mount with two side mounting brackets and minimum of 10' 18/3 STW (US) or 3M 3GX1.0 mm HO7RN-F (IEC) flexible cord. Cord length must be specified.

4750

Listings U.L., C.U.L.

FLOOD

Linear Floodlighting

PRODUCT INFORMATION

AWM

Installation Mounting: KM – Knuckle mounted with two 1/2" NPT side mounting arms. AWM –

Example: 4754 54T5HO MVOLT MFL KM WMP FSS LPI DNAT

ORDERING INFORMATION Series

Lamp type

4752 4753 4754 4756 4758

4752 14T5 2/14T5 24T5HO 2/24T5HO 4753 21T5 2/21T5

14W T5 Two 14W T51 24W T5HO Two 24W T5HO1 21W T5 Two 21W T51

Runs

39T5HO 39W T5HO 2/39T5HO Two 39W T5HO1 4754 28T5 28W T5 2/28T5 Two 28W T51 54T5HO 54W T5HO 2/54T5HO Two 54W T5HO1

4756 2/21T5 Two 21W T5 4/21T5 Four 21W T51 2/39T5HO Two 39W T5HO 4/39T5HO Four 39W T5HO1

Options

ETE End to end10 For runs or end-to-end mounting, see specification sheet on www.hydrel.com

External accessories4 FSS Flush source shield FVSR Full visor HVSR Half visor TPH Tamper-proof hardware Electrical PLPKX Polarpack® cold weather option (120V)4 PLPKY Polarpack® cold weather option (347V)4 PLPKZ Polarpack® cold weather option (208-277V)4 CW20 Cold weather ballast, -20°F (-29°C) starting temperature 5 ELN Emergency battery backup, half output8

ADDITIONAL INFORMATION

4758 2/28T5 Two 28W T5 4/28T5 Four 28W T51 2/54T5HO Two 54W T5HO 4/54T5HO Four 54W T5HO1

Voltage

Distribution

Mounting

MVOLT2 347

WWD Wall wash VFL Vertical flood NFL Narrow flood MFL Medium flood WFL Wide flood3

KM Knuckle mount AWM Adjustable wall mount7

Cord set length6

Lamped

Finish

CSL_ 10' - 50' of cord, available in 5' increments

LPI 3000°K lamp included LP35K 3500°K lamp included LP41K 4100°K lamp included

BL BZ DDB DNA GR STG WH

Black Bronze Dark bronze Natural aluminum Gray Steel gray White

Mounting accessories See page 675.

GN Green SND Sand TVG Terra verde green CF Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 4 -1/2 (11.4)

4 (10.2)

2-3/8 (6.0)

Notes

4-1/2 (11.4)

4 (10.2)

4-3/4 (11.6)

3 (7.6) L

www.hydrel.com | 1-800-750-9773

L 4752 4753 4754 4758 L: 28-7/8 (73.3) 40-7/8 (103.2) 51-7/8 (131.8) 98-3/8 (249.9) AWM

1 Available with WFL distribution only. 2 MVOLT multi-volt ballast range: 120V-277V, 50/60Hz. 3 WFL distribution only available with multiple lamp options as specified with note 1. 4 Accessories are mutually exclusive. Choose one. 5 Only available with WWD and WFL distributions using 54T5HO lamps. 6 Required for AWM mounting only. Specify cord length in feet. Not available with KM. 7 No mounting accessories with AWM. 8 Only available with 4754, 4758 using WWD or WFL distribution; 4756 using WWD distribution. 9 Not available with ELN or MVOLT. 10 ETE only available with KM.

HYDREL

4752 4753 4754 4756 4758 L: 28 (71.1) 40 (101.6) 51 (129.5) 74-1/2 (189.2) 97-1/2 (247.7)

PSG10

1-1/2 (3.8)

673

FLOOD

Linear Floodighting

PRODUCT INFORMATION

4798 4799 Accent Light

Intended Use The 4798 accent lighting fixture offers simple and compact illumination. Ideal for spreading soft, even light along planters, walls and signs. These units are available in incandescent, fluorescent and HID to 50W max.

Front re-lamping via four stainless steel fasteners.

The Hydrel 4799 fluorescent lighting fixture offers highoutput with simple lines and a long, low silhouette. These are ideal for spreading soft, even illumination along planters, walls, and signs that require a low pattern of light.

Optics Distribution: Flood – Flat polished stainless steel reflector.

Electrical 4798: Incandescent – T10, 60W max; Fluorescent – 42TRT max; HID – E17, 50W max.

Construction Material: Extruded aluminum with die-cast aluminum end caps. Knuckles are cast bronze.

4799: T8, 44W max, per lamp. Ballast: Integral mounted ballast for low temperature operation.

Fasteners: Stainless steel.

Installation Mounting: 4798: Single 1/2" NPT adjustable cast bronze knuckle. 4799: Two (2)1/2" NPT adjustable knuckles.

Lens: (4798): Tempered Borosilicate Glass. (4799): Clear acrylic.

Listings U.L., CSA

Example: 4798 32TRT MVOLT HGS LPI BZ

ORDERING INFORMATION Series

Lamp type

4798 4799

4798 60I 13DTT 2/13DTT 18TRT

Voltage

T-10, medium1 Double twin tube, 4-pin Two double twin tube, 4-pin Triple tube, 4-pin

Mounting accessories See page 675.

ADDITIONAL INFORMATION

26TRT 32TRT 42TRT 35S 50M

Triple tube, 4-pin Triple tube, 4-pin Triple tube, 4-pin E17, medium1 E17, medium

4799 54T5HO 2/54T5HO 32 44T8HO

120 208 220 240 277 347 MVOLT2, 3

T5HO, miniature bi-pin Two T5HO, miniature bi-pin T8, medium bi-pin T8HO, recessed double contact3

Options

Lamped

Finish

External accessories HGS Half glare shield

LPI Lamp included

BZ BL DDB DNA GN GR SND

Bronze Black Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Steel gray Terra verde green White Custom finish

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 49-3/4 (126.4)

5 (12.8) 4-1/4 (10.8)

4-1/4 (10.8)

39-1/4 (99.7)

HYDREL

4799

674

4-1/4 (10.8)

12-1/2 (31.8)

5 (12.8) 4798 HID

10-1/2 (26.7)

5 (12.8) 4798 Standard

Notes 1 60I and 35S are only available in 120V. 2 MVOLT (120V-277V) only available with fluorescent lamps. 3 MVOLT is not available with 44T8HO.

1-800-750-9773 | www.hydrel.com

PSG10

FLOOD & LANDSCAPE LIGHTING Mounting Accessories

N = option available

FLOOD AND LANDSCAPE LIGHTING MOUNTING ACCESSORIES NOMENCLATURE

2100 47501 4798 4799 4511 4516 4519 4521 4524 4525 4529 4610 4620 4630 4640 4650 4709

DESCRIPTION

ARJB

Architectural junction box

FJB

Flush mounted junction box

JBA/JBB

Junction box aluminum/bronze

MS/MSB

Mounting spike steel/bronze (12” or 18” – 12V only)

PS/PSS

Polymer ground spike open/sealed (18”, 24” 36”)2

PSSA

Pedestal stanchion mount

SBA/SBB

Stake box aluminum/bronze (12” or 18”)3

SMSA

Stanchion mount 7

NO BALLAST TRA/TRB TRAS/TRBS

N N

WMP

Wall mount plate

WMP EA

Wall mount plate for extended arm 7

BSBTS

Big surface box with tree strap (175W max.)5

CBA/CBB

Combo box (175W max.)

N N

Encapsulated ballast box (100W max.)

N N

SCA/SCB

Small transformer box, aluminum or bronze (75W max.)

SPCA

Small polymer combo box (70W max.)

SSB

Small surface box (70W max.)

SSB EA

Small surface box with extended arms (70W max.) 7

SSBTS

Small surface box with tree strap (70W max.)

TRMT Tree mount transformer Reminder: Transformer or HID ballast not included (excluding 4620 M50, 4750). Please remember to order a ballast or transformer box.

N N

Round aluminum combo box (100W max.)

RACB

Big surface box with extended arms (175W max.) 7

Wall mount with extended arms 7

BSB EA

Wall mount with integral splice box

Big surface box (175W max.)5

WMSA EA

BSB

WMSA

Big polymer transfomer box (300W max. low voltage)

Big polymer combo box (175W max.)

BPTA

BPCA/BPCB

Wall box cover

Above-ground ballast (175W max. – remote)

N N

Wall mount cover3

Wall mount plate with extended arm strut

N N

WMC

AGB

N N

3, 5

WMP EAS

N N

Tree mounted T-box aluminum/bronze Tree strap4

WBC35R/WBC4O

BALLAST EBA/EBB

MOUNTING ACCESSORIES

Flood & Landscape Lighting Mounting

PRODUCT INFORMATION

N N

Notes Two of the selected mounting boxes will be provided. PS available in 12V only. Knuckle mount fixtures only. Specify up to four junction boxes per strap. Will accept two fixtures per mounting. To order with the fixture put 2/ in the lamp type category; for example: 4511 2/M35 12 SP WBC 4O DNA. Visit www.hydrel.com for detailed information on any of the mounting options. 6 For 120V portable applications only. 7 Multiple lengths available consult specification sheets.

PSG10

www.hydrel.com | 1-800-750-9773

HYDREL

1 2 3 4 5

675

MOUNTING ACCESSORIES

Ground & Wall Mounting

PRODUCT INFORMATION

GROUND & WALL Mounting Accessories 12-1/2 (31.8)

4-1/8 (10.5) 5-7/8 (14.9)

12-1/4 (31.1)

4-1/8 (10.5)

8-7/8 (22.4)

4-1/8 (10.5)

4-1/4 (10.8)

1/2 (1.3)

6 (15.2)

6 (15.3)

1 (2.5)

4-5/8 (11.7)

2-3/8 (6.0)

BSB

SSB

WMC

WBC40

WMSA

9-1/2 (24.1)

T1903

TRMT

9 (22.9) 12-1/4 (31.1)

6 (15.2)

12-1/4 (31.1)

6 (15.2) 12 (30.5)

12 (30.5)

12 (30.5) 9 (22.9)

2-1/4 (5.7)

12-1/4 (31.1)

6 (15.2)

12-1/4 (31.1) 6 (15.2)

24 (61.0)

12-1/4 (31.1)

24 (61.0) 9 (22.9)

2-1/4 (5.7)

12-1/4 (31.1)

12-1/4 (31.1) 6 (15.2)

6 (15.2) 36 (91.4)

36 (91.4)

EA45 on BSB (HID 100 – 150 W)

EA on BSB (HID 100 – 150W)

4-1/2 (11.4)

4 (10.2)

6 (15.3)

AGB

WBC35R

2-1/4 (5.7)

12-1/4 (31.1)

4 (10.2)

8-1/8 (20.6)

2-7/8 (7.3)

2-3/8 (6.0)

5-1/8 (13.0)

4-1/4 (10.8)

EA90 on BSB (HID 100 – 150 W)

9 (22.9) 2-1/4 (5.7)

8-7/8 (22.5) 12 (30.5)

24 (61.0)

24 (61.0) 8-7/8 (22.5)

36 (91.4)

8-7/8 (22.5)

6 (15.2)

36 (91.4)

EA90 on SSB (LV, HID 35 – 70W)

9 (22.9)

2-1/4 (5.7)

6 (15.2)

2-1/4 (5.7)

6 (15.2)

6 (15.2) 12 (30.5)

9 (22.9) 6 (15.2)

24 (61.0) 6 (15.2)

EA on WMSA (Incandescent)

8-7/8 (22.5)

6 (15.2)

12 (30.5)

24 (61.0)

36 (91.4)

24 (61.0)

EA45 on SSB (LV, HID 35 – 70W)

12 (30.5)

8-7/8 (22.5)

6 (15.2)

36 (91.4)

6 (15.2)

12 (30.5)

9 (22.9)

2-1/4 (5.7)

EA on SSB (LV, HID 35 – 70W)

HYDREL

9 (22.9) 8-7/8 (22.5)

6 (15.2)

8-7/8 (22.5)

6 (15.2)

12 (30.5)

2-1/4 (5.7)

8-7/8 (22.5)

676

8-7/8 (22.5)

6 (15.2)

2-1/4 (5.7)

6 (15.2) 24 (61.0)

9 (22.9) 6 (15.2)

6 (15.2)

36 (91.4)

EA45 on WMSA (Incandescent)

EA90 on WMSA (Incandescent) Notes For WMP, SSBTS, BSBTS and RACB, visit www.hydrel.com.

1-800-750-9773 | www.hydrel.com

PSG10

GROUND, WALLMounting & POLE Accessories 6 (15.2) 6 (15.2)

3 (7.6)

TRAS TRBS

2-3/4 (7.0)

ARJB

JBA JBB

12 (30.5)

SMSA

6-1/2 (16.5) 3-1/4 (8.3)

5-3/4 (14.6)

7-3/4 (19.7)

8-1/4 (30.0)

7 (17.8) 3-7/8 (9.8)

BPTA

3 (7.6)

20-1/4 (51.4)

18-1/4 (46.4)

12 (30.5)

18 (45.7)

MS18 MSB18

12 (30.5)

PSS

SBA18 SBB18

SBA12 SBB12

10-1/2 (26.7) 10 (25.4)

9-1/2 (24.1)

9-1/4 (23.5)

8-1/8 (20.6) 5 (12.7)

MS12 MSB12

12 (30.5) 7-3/8 (18.7)

SPCA SPCB

9 (22.9)

7-1/8 (18.1)

5 (12.7)

6-1/2 (16.5)

4-1/4 (10.8)

BPCA BPCB

CBA CBB

EBB EBA

SCA SCB

3-1/4 (8.3)

3-3/4 (9.5) 6 (15.2)

PSSA

8-7/8 (22.5)

8 (20.5) 7-3/8 (18.7)

3 (7.6)

7 (17.8)

4-1/4 (10.8)

FJB

18 (45.7)

4-1/4 (10.8)

2-1/2 (6.4)

7/8 (2.2) 6 (15.2)

4-3/4 (12.1)

4-1/8 (10.5)

3-1/4 (8.3) 6 (15.2)

TRA TRB

6 (15.2)

4-1/8 (10.5)

3-3/4 (9.5) 3 (7.6)

2-1/2 (6.4)

7/8 (2.2)

MOUNTING ACCESSORIES

Ground, Wall & Pole Mounting

PRODUCT INFORMATION

5 (12.7) 18 (45.7) EWM Extended Wall Mount

2-1/4 (5.7) 7 (17.8)

6 (15.2)

PMSA Pole Mount

TRJB Tree Mount

5-1/2 (14.0) 24 (61.0)

3-1/2 (8.9)

24 (61.0)

6 (15.2) 6-1/2 (16.5)

6-1/2 (16.5)

3-1/2 (8.9) 12 24 18 (30.5) (45.7) (60.8) 3-5/8 (9.2) PAR4 Pole Arm Round PAS4 Pole Arm Square

PMT Pole Mount Tee 18 (45.7)

5-1/2 (14.0) 6 (15.2)

6 (15.2)

12 (30.5)

18 (45.7)

PATR4 Pole Arm Twin Round PATS4 Pole Arm Twin Square

www.hydrel.com | 1-800-750-9773

HYDREL

3-5/8 (9.2)

SMT Stanchion Mount Tee

PSG10

3-1/2 (8.9)

24 (60.8)

677

LANDSCAPE LIGHTING

Accent Lighting

PRODUCT INFORMATION Intended Use Low-profile accent light for shrubs, planters or wall mountings.

4511

Construction Material: Housing is machined aluminum alloy. Knuckle is cast bronze.

Optics Lens: Tempered flat glass. Electrical Lamp: Low-voltage – MR11, 35W max.

Listings U.L., CSA, IP66, suitable for wet locations. Requires low-voltage supply.

Installation Mounting: 1/2" NPT adjustable knuckle.

Example: 4511 M35 12 SP WMC LPI DNA

ORDERING INFORMATION 3

Series

Lamp type

Voltage

Distribution

4511

Low voltage M35

121 1202 2772

NR No reflector SP Spot NFL Narrow flood

ADDITIONAL INFORMATION

Mounting accessories

Lamped

Finish

See page 675.

LPI Lamp included

BL BZ DDB DNA GN GR

Black Bronze Dark bronze Natural aluminum Green Gray

SND STG TVG WH CF

Sand Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

5-3/8 (13.7)

2 (5.1)

Notes 1 Transformer sold separately. 2 Only valid when transformer box is ordered. 3 Distribution only required with LPI option. All others choose NR.

3-1/2 (8.9)

2-5/8 (6.7)

Accent Lighting

PRODUCT INFORMATION Intended Use Low-profile accent light for shrubs, planters or wall mountings.

4516

Construction Material: Housing is die-cast, copper-free aluminum alloy A360. Knuckle is cast bronze.

Optics Lens: Tempered flat glass. Electrical Lamp: Low-voltage – MR16 quartz halogen, 50W max.

Listings U.L., CSA, IP66, suitable for wet locations. Requires low-voltage supply.

Installation Mounting: 1/2" NPT adjustable knuckle.

Example: 4516 M50 12 SP WMSA LPI DNA

ORDERING INFORMATION Series 4516

Lamp type Low-voltage M50

ADDITIONAL INFORMATION

Voltage 1

12 1202 2772

Distribution NR SP NSP FL NFL WFL

HYDREL

No reflector Spot Narrow spot Flood Narrow flood Wide flood

Mounting accessories

Lamped

Finish

See page 675.

LPI Lamp included

BL BZ DDB DNA GN GR

Black Bronze Dark bronze Natural aluminum Green Gray

SND STG TVG WH CF

Sand Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

678

3-1/4 (8.3) 2-3/4 (7.0)

Notes 5-1/8 (13.0)

1 Transformer sold separately. 2 Only valid if transformer box is ordered. 3 Distribution only required with LPI option. All others choose NR.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use Spotlights architectural or landscape features from the ground, wall mountings or trees.

Fasteners: Stainless steel.

Electrical Lamp: Incandescent – PAR38 250W max. Metal halide – PAR38 150W max.

Optics Lens: Incandescent: No lens. Lamp face forms lens on incandescent. HID – convex, clear tempered glass. Amber, blue, green or red lenses available.

Construction Material: Cast aluminum with cast bronze knuckle.

Installation Mounting: 1/2" NPT adjustable knuckle.

4519

Listings U.L., CSA, suitable for wet locations.

HID requires separate ballast box.

Example: 4519 P38250I 120 SP JBA LPI DDB

ORDERING INFORMATION Series 4519

Lamp type 1

Incandescent P38100I P38120I P38250I Ceramic metal halide2 P2035CM

P3870CM P38100CM Metal halide2 P3870M P38100M P38150M

ADDITIONAL INFORMATION

Voltage

Distribution

120 208 240 277 347 120/277 MVOLT3 TB

No reflector SP Spot FL Flood WFL Wide flood

Lens

Mounting accessories

Options

Lamped

Finish

CLC Convex lens clear5 CLA Convex lens amber CLB Convex lens blue CLG Convex lens green CLR Convex lens red

See page 675.

External accessories GS Glare shield Fusing SF Single fuse6 DF Double fuse7 Ballast GEB Electronic ballast

LPI Lamp included

BL Black BZ Bronze DDB Dark bronze DNA Natural aluminum GN Green GR Gray

9-1/4 (23.5)

Notes 1 2 3 4

6-3/8 (16.6) 2-1/2 (7.6)

Available with 120V only. Separate ballast enclosure required for HID models. MVOLT is standard on metal halide lamps with GEB ballast option. Not all distributions available with all lamp types; use NR when not using LPI option.

5 CLC will be used if no lens is chosen on HID. 6 SF is available with 120V or 277V on HID only. 7 DF is available with 208V, 220V or 240V on HID only.

Accent Lighting

PRODUCT INFORMATION Intended Use The graceful style of this adjustable up-light is used extensively for spot or floodlighting shrubs, trees and building facades. Construction Strongly constructed of copper and bronze with durable silicone sealing gaskets, the fixture is completely

weatherproof. The shield provides maximum beam control with minimum side glare. The metal weathers naturally to a patina of soft copper tones. Provided with clear tempered lens.

finish also available. See ordering guide for options.

150W max. HID – PAR38, 150W max. E17, 150W max.

Fasteners: Stainless steel.

Socket: Pulse rated medium base.

Optics Distribution: E17 lamps – Spot and flood. PAR lamps – Beam spread by lamp type.

Material: Heavy-gauge spun copper body with cast bronze knuckle and sealing rings. Finish: Bright dipped natural copper standard. Painted

Lens: Convex, tempered glass.

Installation Mouting: 3/4" NPT adjustable knuckle. Separate ballast enclosure required for HID models.

Electrical Lamp: Incandescent – PAR38,

Listings U.L.

4521

Example: 4521 100M 120 SP CLC BPCA GS SF LPI BZ

ORDERING INFORMATION Mounting accessories

Voltage Distribution3 Lens

Series Lamp type 1

Incandescent P38100I P38150I Metal halide2 P3035CM P3070CM P3870M

ADDITIONAL INFORMATION

SND Sand STG Steel gray TVG Terra verde green WH White CF Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

4521

LANDSCAPE LIGHTING

Accent Lighting

PRODUCT INFORMATION

P3870CM P38100M P38100CM P38150M 70M 70CM 100M

100CM 150M High pressure sodium2 70S 100S 150S

120 208 240 277 347 120/277 MVOLT8

SP Spot FL Flood

CLC Convex See page 675. lens clear4 CLA Convex lens amber CLB Convex lens blue CLG Convex lens green CLR Convex lens red

Options External accessories FGS Full glare shield GS Glare shield

Lamped Fusing SF Single fuse5 DF Double fuse6 Ballast GEB Electronic ballast

Finish7

LPI Lamp BZ Bronze included BL Black DDB Dark bronze DNA Natural aluminum GN Green GR Gray SND Sand

STG Steel gray TVG Terra verde green WH White CF Custom finish

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

PSG10

17 (43.2)

7-3/8 (18.7)

www.hydrel.com | 1-800-750-9773

Notes 1 2 3 4

Available with 120V only. Separate ballast enclosure required for HID models. E17 lamps valid with flood (FL) distribution only. CLC is the default lens.

5 6 7 8

SF is only available with 120V, 277V or 347V on HID only. DF is only available with 208V, 220V, 240V on HID only. Paint finish is optional; standard fixture is natural copper. MVOLT is standard on metal halide lamps with GEB ballast option.

HYDREL

12 (30.5)

679

LANDSCAPE LIGHTING

Accent Lighting

PRODUCT INFORMATION

4524

Intended Use Accents trees, shrubs, signs and walls from the ground, wall mountings or trees.

options. Bronze models – Natural bronze.

Construction Material: Cast aluminum or bronze.

The optional glare shield eliminates source glare while still allowing for maximum light output. Heat-resistant, tempered lens and silicone gasket provide weathertight protection.

Fasteners: Stainless steel.

Finish: Aluminum models – See ordering guide for color

4524

Lamp type

Voltage 1

A Aluminum B Bronze

Low-voltage M35 M50 M75 Ceramic metal halide1 P2035CM

ADDITIONAL INFORMATION

Installation Mounting: 1/2" NPT adjustable knuckle. HID requires separate ballast box.

Electrical Lamp: Low-voltage – MR16, 75W max. Incandescent – PAR16 or PAR20, 60W max. HID – Metal halide PAR20, 35W max.

Listings UL, CSA, suitable for wet locations.

Example: 4524 A P2035CM 277 SP CLC SPCA LP BL

ORDERING INFORMATION Series Material

Optics Lens: Clear convex tempered glass. Amber, blue, green and red lenses also are available.

Incandescent P1640I P1655I P1660I P2050I P2060I

12 120 2083 2403 277 347 120/2773 MVOLT3 TB3

Distribution4

Lens5

NR No reflector SP Spot NSP Narrow spot FL Flood NFL Narrow flood WFL Wide flood

CLC Convex lens clear CLA Convex lens amber CLB Convex lens blue CLG Convex lens green CLR Convex lens red

Mounting accessories Options

Lamped

Finish

See page 675.

LP Lamp installed

BL BZ DDB

Black Bronze Dark bronze

DNA

Natural aluminum Green Gray

Internal accessories IHL Internal honeycomb louver External acessories GS Glare shield Fusing SF Single fuse6 DF Double fuse7

GN GR

6 (15.2)

Notes 1 Separate ballast enclosure required for HID models, transformers for low-voltage lamps. 2 Transformer sold separately. 3 Only available with HID lamps.

3-7/8 (9.8) 5-5/8 (14.0)

Accent Lighting Intended Use Accents trees, shrubs, signs and walls from the ground, wall mountings or trees.

4525

Fasteners: Stainless steel. The optional glare shield eliminates source glare while still allowing for maximum light output. Heat-resistant, tempered lens and silicone gasket provide weathertight protection.

Construction Material: Cast aluminum or bronze. Finish: Aluminum models – See ordering guide for color options. Bronze models – Natural bronze.

Lamp type

Voltage

A Aluminum Incandescent1 B Bronze P38100I P38150I P38250I Metal halide2 70M 70CM 100M

100CM 150M 175M P3870M P3870CM P38100M P38100CM P38150M

HYDREL

120 208 220 240 277 347 TB

Lens: Convex tempered glass, clear. Electrical Lamp: Incandescent – PAR38, 250W max. HID – PAR38 or ED17, 175W max.

Socket: Pulse rated medium base or E27 (European) standard. Installation Mounting: 1/2" NPT adjustable knuckle. Separate ballast box required for HID models. Listings UL, CE, CB, NEMKO, CSA.

Mounting Distribution Accessories Options

Lamped

Finish7

SP Spot FL Flood

LPI Lamp Included

BZ Bronze BL Black DDB Dark bronze DNA Natural aluminum GN Green GR Gray

See page 675.

Internal accessories IHL Internal honeycomb louver3 External accessories GS Glare shield FGS Full glare shield Fusing SF Single fuse5 DF Double fuse6

SND Sand STG Steel gray TVG Terra verde green WH White CF Custom finish

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

680

High pressure sodium2 70S 100S 150S

Optics Distribution: HID – Spot or fused, PAR lamp determined by lamp type.

Example: 4525 A 100CM 277 FL BSB GS SF LPI BZ

ORDERING INFORMATION

ADDITIONAL INFORMATION

Custom

4 Not all distributions available with all lamp types; use NR when not using LPI option. 5 CLC will be used if no lens is chosen on HID. 6 SF is available with 120V, 277V or 347V on HID only. 7 DF is available with 208V or 240V on HID only.

PRODUCT INFORMATION

4525

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

Series Material

SND Sand STG Steel gray TVG Terra verde green WH White

12-1/2 (31.8)

Notes 7 (17.8)

8 (20.3) 8-1/2 (21.6)

1 2 3 4 5

Incandescent models available with 120V only. Separate ballast enclosure required for HID models. Only available with PAR lamps. STB available on PSS_, BPCA and SPCA only. SF is only available wth 120V,277V or 347V on HID only.

6 DF is only available with 208V, 220V or 240V on HID only. 7 Finish is only available on fixtures with aluminum material.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use Uplighting of trees, signs, walls and building facades.

Optics Lens: None.

Listings U.L., suitable for wet locations.

4529

Electrical Lamp: Incandescent â&#x20AC;&#x201C; PAR38 medium-base.

Construction Material: Cast aluminum or cast bronze body and glare shield. Knuckle is cast bronze.

Installation Mounting: 1/2" NPT adjustable knuckle.

Fasteners: Stainless steel.

LANDSCAPE LIGHTING

Accent Lighting

PRODUCT INFORMATION

Example: 4529 B P38150I 120 SP JBB LP

ORDERING INFORMATION Series

Material

Lamp type

Voltage

Distribution1

Mounting accessories Lamped

Finish2

4529

A Aluminum B Bronze

Incandescent P38100I P38150I

120

NR SP FL WFL

See page 675.

BL BZ DDB DNA

ADDITIONAL INFORMATION

No reflector Spot Flood Wide flood

LP Lamp installed

Black Bronze Dark bronze Natural aluminum

GN GR SND STG

Green Gray Sand Steel gray

TVG Terra verde green WH White CF Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

9 (22.9) 6 (15.2) 2-5/8 (6.7)

Notes 1 Not all distributions available with all lamp types; use NR when not choosing LPI option. 2 Finish required on aluminum products.

3-3/4 (9.5)

Accent Lighting

PRODUCT INFORMATION Intended Use Tree-mounted or groundmounted uplighting, or building-mounted facade lighting.

minum A360. All aluminum materials are chem filmed or anodized prior to painting.

Construction Material: Fixture, knuckle, yoke are copper-free alu-

Optics Lens: Crowned tempered glass.

Electrical Lamp: MR16, 75W max. Ceramic metal halide, 35W max.

Fasteners: Stainless steel.

Installation Mounting: Knuckle 1/2" NPT adjustable. Yoke mount with a minimum of 10' of 18/3

STW cord. Cord length must be specified.

4610 4620

Listings U.L., C.U.L., IP66, suitable for wet locations.

Visit www.hydrel.com for monochromatic LED specifications.

Example: 4610 M50 277 FL KM SSB IHL FGS LPI SND

ORDERING INFORMATION Series Lamp type 1

4610 46202

Low-voltage M202 M352 M502 M751 Ceramic metal halide3 P2035CM 35CMT4 4

Voltage Distribution5 1

12 120 208 240 277 347 120/277 MVOLT TB

ADDITIONAL INFORMATION

Mounting

No YM Yoke reflector mount SP Spot KM Knuckle mount NSP Narrow spot FL Flood NFL Narrow flood WFL Wide flood

Mounting accessories Options See page 675.

CSL 10'-50' of cord LPI Lamp BL Black (available in 5' included BZ Bronze 9 increments) DDB Dark bronze DNA Natural aluminum GN Green GR Gray

SND Sand STG Steel gray TVG Terra verde green WH White CF Custom

7-1/8 (18.0)

4610 KM

www.hydrel.com | 1-800-750-9773

7-1/8 (18.0)

3 (7.6)

4-1/4 (10.8)

4620 YM

4620 KM

3 (7.6)

1 2 3 4 5 6 7 8 9 10

Transformer, sold sperately. Transfomer included on 4620 unless 12V is specified. Separate ballast enclosure required; available on 4620 only. Requires GEB ballast. Not all distributions available with all lamp types; use NR when not choosing LPI option. SF is available with 120V, 277V or 347V on HID only. DF is available with 208V or 240V on HID only. Only available with metal halide lamps and MVOLT voltage. Only valid with yoke mount. Not available with 35CMT4 lamps.

HYDREL

PSG10

External accessories FGS Full glare shield GS Glare shield Fusing SF Single fuse6 DF Double fuse7 Ballast GEB Electronic ballast8

Finish

Notes

5-1/4 (13.3)

4-1/4 (10.8) 4610 YM

Internal accessories IHL Internal honeycomb louver10 CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red

Lamped

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 5-1/8 3 5-1/8 (13.1) 3 (7.6) (13.0) (7.6) 4-1/4 (10.8)

Cord set length

681

LANDSCAPE LIGHTING

Accent Lighting

PRODUCT INFORMATION Intended Use Landscape and architectural applications.

4630 4640

Construction Material: Fixture, knuckle, yoke – die-cast, copper-free aluminum alloy A360. All materials are chem-filmed or anodized prior to painting. Fasteners: Stainless steel. Optics Lens: Crowned tempered glass.

Electrical Lamp: Incandescent – 150W max. HID– Metal halide 150W max. Installation Mounting: Knuckle: – 1/2:" NPT adjustable. Yoke – minimum of 10 ft 18/3 STW cord. Cord length must be specified. Listings U.L., C.U.L., C.E., IP66, suitable for wet locations.

Visit www.hydrel.com for monochromtic LED specifications.

Example: 4630 P3070CM 120 SP KM SSB IHL LPI BL

ORDERING INFORMATION Series

Lamp type

Voltage Distribution 1

4630 4640

Incandescent P38100I8 P3075I9 P38150I8 Quartz1, 8 150Q

Ceramic metal halide P3035CM9 P3070CM9 35CMT68 70CMT68 150CMT68

Metal halide 70M P3870M P38100M 100M 150M P38150M

Options (continued) External accessories FGS Full glare shield GS Glare shield

ADDITIONAL INFORMATION

2, 8

High pressure sodium 70S 100S

2, 8

120 208 240 277 347 120/277 MVOLT6 TB

NR SP MFL FL

Mounting accessories

Mounting 3

No reflector Spot Medium flood8 Flood

YM Yoke mount KM Knuckle mount

Cord set length7

Lamped

Finish

CSL_

LPI Lamp included

BL BZ DDB DNA GN GR SND

Fusing SF Single fuse4 DF Double fuse5 Ballast GEB6 Electronic ballast

10'-50' of cord (available in 5' increments)

See page 675.

Black Bronze Dark bronze Natural aluminum Green Gray Sand

Options Internal accessories IHL Internal honeycomb louver CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red LSF Linear spread filter

STG TVG WH CF

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

8-1/8 (20.6)

5-1/4 (13.3)

4-1/4 (10.8) 4630 Knuckle Mount

9-3/8 (23.8)

5-1/4 (13.3)

9-3/8 (23.8)

6-1/2 (16.5)

6-1/4 (15.9)

4-3/4 (12.1) 4630 Yoke Mount 4640 Knuckle Mount

4640 Yoke Mount

HYDREL

Notes

682

1 2 3 4 5 6 7 8 9

Available in 120V only. Separate ballast enclosure required. Only valid if LPI is not chosen. SF is available with 120V, 277V or 347V on HID only. DF is available with 208V or 240V on HID only. MVOLT default if GEB selected; only valid with metal halide lamps. Only valid with yoke mount. Available with 4640 only. Available with 4630 only.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use These large, versatile accent lights provide illumination for a variety of architectural and landscape applications to 60'. Construction Material: Die-cast, copperfree aluminum alloy A360. All aluminum materials are chem-filmed or anodized prior to painting. Finish: See ordering guide for color options. Fasteners: Stainless steel.

Optics Lens: Crowned tempered glass.

of 10' 18/3 STW cord. Cord length must be specified.

Electrical Lamp: Incandescent – T4, 250W max.; PAR 56 – 300W max. HID – E17, T6 or PAR38, 150W max.

Listings U.L., C.U.L., C.E., IP66, suitable for wet locations.

4650

Socket: Incandescent – Minican (T4) or mogul end prong (PAR 56). HID – Medium-base or G12 base. Voltage: See ordering guide. Installation Mounting: Knuckle – 1/2" NPT. Yoke – With a minimum

Example: 4650 150M TB SP KM BSB FGS IHL LP DDB

ORDERING INFORMATION Series

Lamp type

4650

Incandescent1 P38100I 250Q P56300I Ceramic metal halide2 70CMT6 P38100CM 150CMT6

Metal halide2 70M 100M 150M P38100M P38150M

Voltage

Distribution4

Mounting

Mounting accessories

Options

120 208 240 277 347 120/277 480 MVOLT3 TB

NR TSP SP NSP MFL FL NFL WFL

YM Yoke mount KM Knuckle mount

See page 675.

Internal accessories IHL Internal honeycomb louver CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red

Cord set length8 CSL_ 10'-50' of cord (available in 5' increments)

ADDITIONAL INFORMATION

LANDSCAPE LIGHTING

Accent Lighting

PRODUCT INFORMATION

No reflector Tight spot Spot Narrow spot Medium flood Flood Narrow flood Wide flood

Lamped

Finish

LPI Lamp included

BL BZ DDB DNA GN GR

Black Bronze Dark bronze Natural aluminum Green Gray

SND STG TVG WH CF

External accessories FGS Full glare shield GS Glare shield Fusing SF Single fuse5 DF Double fuse6 Ballast GEB Electronic ballast7

Sand Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

11-5/8 (29.5)

4-3/4 (12.1) Knuckle Mount

8-1/2 (21.6)

11-5/8 (29.5)

8-1/2 (21.6)

6-1/4 (15.9) Yoke Mount

Notes 1 2 3 4

PSG10

www.hydrel.com | 1-800-750-9773

HYDREL

5 6 7 8

120V only. Separate ballast enclosure required. Standard on metal halide lamps with GEB ballasts. Not all distributions available with all lamp types; use NR when not choosing LPI on PAR lamps. SF is available with 120V, 277V or 347V on HID only. DF is available with 208V or 240V on HID only. GEB default if MVOLT selected; only valid with metal halide lamps. Only valid with yoke mount.

683

LANDSCAPE LIGHTING

Accent Lighting

PRODUCT INFORMATION Intended Use Designed for installation where cost and reliability are paramount.

4709

Construction Material: Die-cast aluminum. Fasteners: Stainless steel. Optics Lens: Convex tempered glass (HID); lens optional on incandescent models.

Socket: Pulse-rated medium-base. Installation Mounting: 1/2" NPT adjustable knuckle. Listings U.L., C.U.L., suitable for wet locations.

Electrical Lamp: Incandesent – PAR38, 250W max. HID – PAR38, 150W max.

Example: 4709 P3870M 120 SP CLC SPCA LP BL

ORDERING INFORMATION Series 4709

Lamp type

Voltage Distribution 1

Incandescent P38100I P38150I Metal halide2 P3870CM P38100CM P3870M P38100M P38150M

ADDITIONAL INFORMATION

120 208 240 277 347 120/277 MVOLT3 TB

Mounting accessories

Lens 4

NR No reflector CLC Convex lens clear SP Spot CLA Convex lens amber FL Flood CLB Convex lens blue CLG Convex lens green CLR Convex lens red

See page 675.

Options

Lamped

Finish

Internal accessories IHL Internal honeycomb louver External accessories GS Glare shield Fusing SF Single fuse5 DF Double fuse6 Ballast GEB Electronic ballast7

LP Lamp installed

BL BZ DDB DNA GN GR SND

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG Steel gray TVG Terra verde green WH White CF Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 9 (22.9) 5-3/8 (13.7)

5 (12.7)

HYDREL

Notes

684

1 2 3 4 5 6 7

Incandescent models valid with 120V only. Separate ballast enclosure required for HID models. Standard on metal halide lamps with GEB ballast. CLC lens provided on all HID models, optional on incandescent. SF available with 120V, 277V or 347V on HID only. DF available with 208V, 220V or 240V on HID only. Only available with metal halide lamps and MVOLT voltage.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use Designed for installations where function, appearance and durability are essential considerations. Construction The 4720 Series architectural accent light meets the most demanding requirements. Integral ballast with heavy cast aluminum construction adds up to a fixture of exceptional quality. The unit is weather-tight with a heat-resistant, tempered convex lens. Supplied as a knuckle-mounted unit.

Material: Heavy wall cast aluminum body and knuckle.

Socket: MH – T6, G12 bi-pin or RSC double-ended 150W max. HPS – T10, PG12 bi-pin.

Fasteners: Stainless steel. External door fasteners are Teflon® coated stainless steel.

4720

Ballast: High power factor magnetic ballast standard. Ballast included in fixture head.

Optics Distribution: Spot (SP) or medium flood (MFL).

Installation Mounting: 3/4" NPT male adjustable knuckle with self-releasing taper allows infinite vertical adjustment through 180°.

Lens: Clear convex tempered glass. Accessories: External glare control.

Listings U.L.

Electrical Lamp: MH: (T-6), 150W max. HPS: T10, 100W max.

Example: 4720 150CMTD 120 SP PSSA IHL SF LPI BZ

ORDERING INFORMATION 1

Series

Lamp type

Voltage

Distribution

Mounting accessories

Options

Lamped

Finish

4720

Metal halide 70CMTD RSC 150CMTD RSC 70CMT6 G12 150CMT6 G12 High pressure sodium 70SDW PG12 100SDW PG12

120 208 220 240 277 347 TB

SP Spot MFL Medium flood

FJB Flush J-box PSSA Ped. stanchion mount 7" splice access SMSA_ 12" - 48" stanchion mount, available in 6" increments WMSA Wall mount splice access

Internal accessories IHL Internal honeycomb louver External accessories FGS Full glare shield Fusing SF Single fuse2 DF Double fuse3 Door clips TDC Tool-less door clips

LPI Lamp included

BZ BL DDB DNA GN GR SND STG TVG WH CF

ADDITIONAL INFORMATION

LANDSCAPE LIGHTING

Accent Lighting

PRODUCT INFORMATION

Bronze Black Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom finish

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 10-7/8 (27.6)

10-1/2 (26.7)

9-7/8 (25.1)

4 (10.2)

1 See individual mounting specification sheets for conduit/drilling options. 2 SF is only available with 120V, 277V or 347V on HID only. 3 DF is only available with 208V, 220V or 240V on HID only.

PSG10

www.hydrel.com | 1-800-750-9773

HYDREL

Notes

685

STEP & BORDER

Step Lights

PRODUCT INFORMATION Intended Use For use in outdoor wet locations, such as patios and pathways at hospitals, hotels, schools, airports and parking garages.

4451 4452 4453

Construction Material: Cast aluminum or cast bronze. Aluminum body black permabarred. Fastners: Stainless steel. 4451

Accessories: Louver door, 45° cut-off.

Optics Lens: Diffused, tempered glass for non-louvered door. Clear, tempered glass for louvered door. Electrical Lamp: Incandescent – 40W max, A19 lamp. Fluorescent – single or double 13W max. CFL twin tube or double twin tube.

Ballast: Fluorescent – Electronic ballast high frequency with 0°F (-18°C) minimum starting temperature. Conduit entry: 3/4" NPT side entries standard. Listings U.L., CSA, suitable for wet locations.

Socket: Incandescent – Medium screw base. Fluorescent – 2G7 or GX24Q-1 base.

4453

4452

Example: 4451 A 13DTT 120 LPI SND

ORDERING INFORMATION Series

Material

Lamp type

Voltage

Options

Lamped

Finish

4451 4452 4453

A Aluminum B Bronze

Incandescent 40I1 Fluorescent 7TT 9TT 13DTT 2/7TT2 2/9TT2 2/13DTT2

120 277 347

External accessories LLV Louver door

LPI Lamp included

BL BZ DDB DNA GN GR SND

ADDITIONAL INFORMATION

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

5-3/8 (13.6) 10-1/2 (26.7)

HYDREL

5-1/4 (13.3) 4-5/8 (11.3)

4451

686

3 (11.6) 10-1/4 (26.0)

3-3/4 2-1/4 (9.5) (5.7)

4 (10.2) 4-1/2 (11.3)

10-1/4 (26.0)

3-7/8 (9.8) 4453

4452

Notes 1 Incandescent models available with 120V only. 2 Only available with 4452.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use For use in outdoor wet locations such as patios and pathways at hospitals, hotels, schools, airports and parking garages. Construction Material: 4454 – Cast aluminum or cast bronze. Aluminum body black permabarred. 4456 – Cast aluminum.

Optics Lens: Diffused, tempered glass for non-louvered door. Clear, tempered glass for louvered door. Electrical Lamp: HID – 50W max, E17 lamp. Socket: Medium screw base, pulse-rated.

temperature. Fluorescent – Electronic ballast high frequency with 0° F (-18°C) minimum starting temperature.

4454 4456

Conduit entry: 3/4" NPT side entries standard. Listings U.L., CSA, suitable for wet locations.

Ballast: HID – Magnetic ballast high power factor with -20°F (-29°C) minimum starting

Fastener: Stainless steel.

STEP & BORDER

Step Lights

PRODUCT INFORMATION

4454

4456

Example: 4456 42TRT 120 ELN LPI DDB

ORDERING INFORMATION Series

Material1

Lamp type

4454 4456

A Aluminum B Bronze

Incandescent 75I2, 3 Fluorescent3 18TRT 26TRT 32TRT 42TRT

ADDITIONAL INFORMATION

Metal halide 50M High pressure sodium2 35S 50S

Voltage

Options

Lamped

Finish

120 277 347 MVOLT5

Fusing ELN Emergency battery backup3, 4 SF Single fuse5 External accessories LLV Louver door

LPI Lamp included

BL BZ DDB DNA GN GR SND

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

4 5-1/4 (13.3) (10.2) 10-1/4 (26.0) 4454

6 (15.2) 8-5/8 (21.9)

13 (33.0)

5-1/8 (14.0) 6-1/2 (16.5)

4456

Notes

PSG10

www.hydrel.com | 1-800-750-9773

Not available with 4456. Available in 120V only. Not available with 4454. Only available with fluorescent lamps. Only available with metal halide lamps.

HYDREL

1 2 3 4 5

687

STEP & BORDER

Step Lights

PRODUCT INFORMATION Intended Use Meets installation requirements for wood and all (insulation) type IC applications. Fixtures are completely weatherproof with neoprene gasket and tempered lens.

4462

Construction Fixture housing and door: Heavy wall cast bronze construction. Natural bronze finish. Gasket: Single piece, molded U-shaped silicone.

Cord: Minimum of 35' of #16-3ST submersible rated cord. Cord entrance is brass water-tight seal and epoxy encapsulated. Cord length must be specified. Fasteners: Stainless steel. Optics Lens: Tempered borosilicate diffuse glass standard. Clear tempered borosilicate glass. Electrical Lamp: Incandescent – A19 90W max., 120V. Quartz halogen – T4 75W max.,

120V. Low-voltage – two MR16, 35W max. each. Socket: Incandescent – Medium base. Quartz halogen – Mini-can screw base. Lowvoltage – Gx5.3 bi-pin. Installation Niche: Stainless steel with cast bronze mounting frame which has provisions for locking fixture into position. Single conduit entrance is 3/4" NPT with 3/4" x 1/2" NPT reducer bushing.

Listings U.L., C.U.L., IP67.

Example: 4462 2/M35 12 FL RG CSL50 LPI

ORDERING INFORMATION Series

Lamp type

Voltage

Distribution

4462

Incandescent 90I Quartz 75Q Low-voltage 2/M35

121 120

NR SP NSP FL NFL WFL

ADDITIONAL INFORMATION

System Features Factory leak tested: Fixtures are tested at 10 PSI (0.70kg/ cm2) internal pressure while totally submerged in water.

No reflector2 Spot2 Narrow spot2 Flood Narrow flood2 Wide flood2

Options

Cord set length

External accessories3 LLV Louver door RG Rock guard

CSL_

35'-120' of cord4

Lamped LPI Lamp included

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

5-3/8 (13.7)

HYDREL

11 (27.9)

688

6-7/8 (17.5)

Notes 1 2 3 4

Transformer sold separately. Only available with 2/M35. Only available with 2/M35. Accessories are mutually exclusive. Choose one. CSL 50 is maximum length for 12V fixtures.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use This unique style and distinctive fixture are ideal for installation in sidewalks or promenades – designed to be recessed in concrete, flush to lower rim. Construction Material: Cast aluminum housing with integral 24" junction box (incandescent) or ballast box (HID, fluorescent).

Glare control: Black finish Glarefoil included. Optics Lens: Molded, tempered, borosilicate. Electrical Lamp: Incandescent – 60W max., A15 or T10/tubular. 100Q (quartz) 100W max., T4/tubular. HID – 100W max., E17/elliptical or T6/ G12. Fluorescent – 32TRT, 32W max.

Socket: Quartz – Mini-can base. Fluorescent – Gx24Q-3 base. HID, incandescent – pulse-rated medium base.

M4534

Conduit entry: Two 3/4" NPT, 1/2" NPT side or bottom openings available.

STEP & BORDER

Border Lights

PRODUCT INFORMATION

Listings U.L., C.U.L.

Gasket: Molded silicone.

Example: M4534 70CMT6 MVOLT 34S MILS180 GEB LPI STG

ORDERING INFORMATION Series

Lamp type

M4534

Incandescent1 60I 100Q Fluorescent 18TRT 26TRT 32TRT

Metal halide 50M 70M 100M Ceramic metal halide 35CMT6 70CM

ADDITIONAL INFORMATION

70CMT6 100CM High pressure sodium 35S1 50S1 70S 100S

Voltage Conduit entry

Options

Lamped

Finish

120 208 240 277 347 MVOLT2

Internal accessories MILS90 Internal 90° light shield MILS180 Internal 180° light shield Fusing SF Single fuse3 DF Double fuse4 5 Ballasts GEB Electronic ballast MLEBAD Electronic dimming ballast6

LPI Lamp included

BL BZ DDB DNA

12B 1/2" NPT bottom 12S 1/2" NPT side 34B 3/4" NPT bottom (default) 34S 3/4" NPT side

Black Bronze Dark bronze Natural aluminum GN Green GR Gray SND Sand

STG Steel gray TVG Terra verde green WH White CF Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 8-3/8 (22.2)

5-1/4 (13.3) 10-1/4 (26.0) HID, Fluorescent

4-3/8 (11.2)

9-1/2 (24.2)

4 (10.2)

Incandescent

Notes

PSG10

www.hydrel.com | 1-800-750-9773

HYDREL

1 Only available in 120V. 2 MVOLT is only available with fluorescent and metal halide lamps with GEB or MLEBAD options. 3 SF available with 120V, 277V or 347V and HID only. 4 DF available with 208V or 240V and HID only. 5 Only available with metal halide lamps and MVOLT voltage. 6 0-10V dimmer not included.

689

STEP & BORDER

Border Lights

PRODUCT INFORMATION Intended Use This unique and distinctive fixture has been custom designed for installation along park walkways and sidewalks.

4540

Construction Material: The bollard section is fabricated from heavy cast aluminum. Rough-in section: Injectionmolded ABS, U.V. stabilized, impact- and corrosionresistant for use in all types of environments.

Optics Lens: Molded tempered glass. 90° cutoff with internal louver. Electrical Lamp: HID – 100W max., E-17/elliptical or 70W T6/G12.

Power module: Sealed unit encapsulated in an engineered composite resin to eliminate all water entry.

Socket: Pulse-rated medium base. Conduit connection: Two 3/4" NPT bottom openings are standard in the cast aluminum integral junction box. Suitable for throughbranch wiring, this box has 24" of volume.

Example: 4540 70M 277 34B LP BL

ORDERING INFORMATION Series

Lamp type

Voltage

Conduit entry

Options

Lamped

Finish

4540

Metal halide 50M 70M Ceramic metal halide 35CMT4 35CMT6 70CM 70CMT4 70CMT6

120 208 240 277 347 MVOLT1

12B 1/2" NPT bottom 34B 3/4" NPT bottom (default)

Internal accessories MILS90 Internal 90° light shield MILS180 Internal 180° light shield Fusing SF Single fuse2 DF Double fuse3 4 Ballast GEB Electronic ballast MLEBAD Electronic dimming ballast5

LP Lamp installed

BL BZ DDB DNA GN GR SND

ADDITIONAL INFORMATION

Black Bronze Dark bronze Natural aluminum Green Gray Sand

STG TVG WH CF

Steel gray Terra verde green White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 8-7/8 (22.5) 3-1/2 (8.9)

12 (30.5)

Single Tamper-Proof Retaining Screw 10 (254.0) 12-1/2 (31.8)

18 (45.7)

HYDREL

Notes

690

1 2 3 4 5

MVOLT is only available with GEB and MLEBAD options. SF available with 120V, 277V or 347V and HID only. DF available with 208V or 240V and HID only. Only available with MVOLT voltage. O-10V dimmer not included.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use Pathway and marker lights are multi-purpose units designed for high-traffic areas to be mounted in a variety of substrates. The M9460 Series also is suitable for drive-over applications and has been tested to withstand up to 22,000 lbs.

Material: Top is cast aluminum.

Construction Rough-in section: Injectionmolded ABS, U.V. stabilized impact- and corrosionresistant for use in all type of environments.

Power module: Sealed unit encapsulated in an engineered composite resin to eliminate all water entry.

M9450 M9460

Electrical Conduit connection: Two 3/4" NPT bottom openings are standard in the cast aluminum integral junction box. Suitable for throughbranch wiring, this box has 24' of volume.

Example: M9450 18TRT MVOLT 12B LP SND

ORDERING INFORMATION Series

Lamp type

M9450 Pathway light M9460 Marker light

Voltage Conduit entry 1

Low-voltage 50QT3 Incandescent2 75Q Metal halide3 70M

ADDITIONAL INFORMATION

STEP & BORDER

Border Lights

PRODUCT INFORMATION

Fluorescent 18TRT 26TRT 32TRT Ceramic metal halide 35CMT41 35CMT6 70CM3

70CMT4 70CMT6 100CM3

1, 9

12 120 208 240 277 347 MVOLT4

12B 1/2" NPT bottom 12S 1/2" NPT side 34B 3/4" NPT bottom 34S 3/4" NPT side 1B 1" NPT bottom

Options 3

Internal accessories MILS90 Internal 90째 light shield MILS180 Internal 180째 light shield External accessories1 XLS External glare shield 2XLS Two external glare shields

Fusing SF DF Ballast7 GEB MLEBAD

Single fuse5 Double fuse6 Electronic ballast Electronic dimming ballast8

Lamped

Finish

LP Lamp installed

BL Black BZ Bronze DDB Dark bronze DNA Natural aluminum GN Green GR Gray SND Sand

STG Steel gray TVG Terra verde green WH White CF Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 9 (22.9)

13 (33.0)

4-1/8 (10.5)

2-1/4 (5.7) 3 (7.6) 15-7/8 (40.3)

M9450

16 (40.6)

M9460

Notes

PSG10

www.hydrel.com | 1-800-750-9773

Only available with M9460. Only available in 120V. Only available with M9450. MVOLT is only available with fluorescent and metal halide lamps. SF available with 120V, 277V or 347V and HID only. DF available with 208V or 240V and HID only. Only available with HID lamps and MVOLT voltage. O-10V dimmer not included. Low-voltage only; transformer sold separately.

HYDREL

1 2 3 4 5 6 7 8 9

691

STEP & BORDER

Border Lights

PRODUCT INFORMATION Intended Use The graceful mushroom garden light is ideal for lighting flower beds, low planter areas, walkways and driveways, or any area where an unobstructed circular field of light is desired.

4595 4596 4597 4598

Construction Material: Heavy-gauge cast bronze body with spun copper canopy.

Electrical Lamp: Quartz T3 20W max. Socket: G4 bi-pin. LED: Available with three LED or one LED boards. Wattage and lumen output will vary with number of LEDs on board, current supplied from driver and LED color. LED driver: Sold separately. See BPTA/BPTP driver enclosure specification sheet for options.

Optics Lens: Glass.

Example: 4595 20QT3 12 JBA LPI VBL

ORDERING INFORMATION Series

Lamp type

4595 4596 4597 4598

Voltage

20QT3 3CCLED Constant current (3 LED)3 1CCLED Constant current (1 LED)3

ADDITIONAL INFORMATION

LED color

Options

Lamped

Finish2

WMW CLW

JBA J-box, aluminum JBB J-box, bronze

LPI Lamp included LP LED installed4

VBL VBZ VGN VTVG VWH

Warm white Cool white

Black Bronze Green Terra verde green White

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 8 (20.3)

8 (20.3)

18-7/8 (47.9)

18-7/8 (47.3)

13-7/8 (35.2)

4595

14 (35.5)

4596

14 (35.6)

8 (20.3)

17-5/8 (44.8)

17-3/4 (45.1)

13-7/8 (35.2)

4597

14 (35.6)

4598

HYDREL

Notes

692

1 Low-voltage transformer sold separately. 2 Vendor-supplied finish. Consult factory for details. 3 Driver sold seperately. Do not specify voltage with LED. See spec sheet for driver options. 4 Only available with LED.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use The 3100 Series bollard is a low-level area lighting luminaire for use in walkways, plazas or pedestrian areas. Construction Material: Copper-free aluminum A360.

Ballast: Integrally mounted core and coil electronic ballast with low starting temperature.

3110 3120 3130 3140

Listings U.L., C.U.L., IP65, suitable for wet locations.

Fasteners: Stainless steel.

BOLLARDS

Bollards

PRODUCT INFORMATION

Electrical Lamp: Fluorescent – 42W max. triple tube. HID – 70W max. G12, 100W max. E17/elliptical. Low pressure sodium – T16, BY22d base.

3110

3130

3140

Example: 3130 36 100M MVOLT SYM GEB LPIC DNA

ORDERING INFORMATION Series

Height

Lamp type

3110 3120 3130 3140

36 42

Incandescent8 100I Fluorescent 26DTT 32TRT 42TRT

Metal halide5 50M 70M 100M Ceramic metal halide6 35CMT4 70CMT4 35CMT6 70CMT6

Lamped LPI LPIC

3120

High pressure sodium5 50S 70S 100S Low pressure sodium 18L 35L

Voltage

Distribution

Options

120 208 240 277 347 120/277 MVOLT1 TB

SYM Symmetric FT Forward throw

Fusing2 SF Single fuse DF Double fuse Ballast GEB Electronic ballast3 GFCI Receptacle ELN Emergency battery backup (fluorescent lamp only), half output7 ELH Emergency battery backup (fluorescent lamp only), full output7

Finish

Lamp included Lamp included (coated)4

ADDITIONAL INFORMATION

Finish BL Black BZ Bronze DDB Dark bronze DNA Natural aluminum GN Green GR Gray

SND Sand STG Steel gray TVG Terra verde green WH White CF Custom Optional louvers painted _ /PL Louvers painted to match fixture

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

8 (20.3) 9 (22.9)

9 (22.9)

35-1/2 (90.2) or 41-1/2 (105.4)

34 (86.4) or 40 (101.6)

8 (20.3)

35 (88.9) or 41 (104.1)

3120

3130

www.hydrel.com | 1-800-750-9773

34 (86.4) or 40 (101.6)

3140

Notes 1 MVOLT is standard on all fluorescent lamps or metal halide lamps with GEB electronic ballasts. 2 SF only valid with 120V, 277V or 347V. DF only valid with 208V or 240V, metal halide lamps only. 3 Only available with metal halide lamps and MVOLT voltage. 4 LPIC only valid with 50M, 70M, 100M, 50S, 70S,100S,100I. 5 Will be provided with coated lamps unless LPI is chosen. 6 T4 and T6 lamps will be provided with a frosted lens. 7 Only valid with 42TRT, 32TRT and 26DTT. Must specify 120V or 277 V. 8 Incandescent lamps 120V only.

HYDREL

3110

PSG10

8 (20.3)

693

BOLLARDS

Bollards

PRODUCT INFORMATION

Intended Use The G2® Bollard Series is designed to work in building perimeter areas and public spaces, completing a wide variety of architectural styles. The G2® bollard fixture offers an unmatched impact-resistant mounting and leveling design, ensuring life-long performance.

G2 LOUVER BOLLARD

Construction Material: Copper-free aluminum A360.

G2LBW

Finish: Polyester powder coated in a range of textured semi-matte. Fasteners: Stainless steel. Optics Light wash: Choose between patent-pending LED color wash or light wash. The LED color wash option adds vibrant color to the bollard and creates the opportunity for customized applications. The optional light wash reflector illuminates the bollard base by redirecting light from main lamp source.

Series

Height

G2LBD G2LBW

36 42

Listings U.L., C.U.L., IP65, suitable for wet locations. IES cutoff.

Example: G2LBD 36 100M MVOLT SYM LEDBF LEDCWB DCT GEB LPIC DNAT Lamp type Metal halide2 70M 100M Ceramic metal halide2 70CM 100CM 35CMT6 70CMT6

Light wash4 (continued) Bollard back LWB Light wash back LEDAB LED color wash, amber back LEDBB LED color wash, blue back LEDRB LED color wash, green back LEDCWB LED color wash, cool white back LEDWWB LED color wash, warm white back LEDRYB LED color wash, royal blue back

ADDITIONAL INFORMATION

Ballast: Integrally mounted core and coil, electronic ballast with low starting temperature.

G2LBD

ORDERING INFORMATION 1

Electrical Lamp: Fluorescent – 42W max., triple tube. HID – 70W max. G12; 100W max. E17.

High pressure sodium2 50S 70S 100S

Fluorescent 26DTT 32TRT 42TRT

Voltage

Distribution

Light wash4

120 208 240 277 347 120/277 MVOLT3 TB

SYM Symmetric FT Forward throw

Bollard front LWF Light wash front LEDAF LED color wash, amber front LEDBF LED color wash, blue front LEDRF LED color wash, red front LEDCWF LED color wash, cool white front LEDWWF LED color wash, warm white front LEDRYF LED color wash, royal blue front

Option

Lamped11

Finish

Control DCT Fusing DF SF Ballast GEB MLEBAD ELN

LPI Lamp included LPIC Lamp included (coated)

Finish DBLB Designer black, textured DSPD Dark gray, textured DNAT Natural aluminum, textured DWHG Designer white, textured DDBT Dark bronze, textured DSPF Rust, textured DSST Sandstone, textured CF Custom finish Optional louvers finishes _/PL Louvers to match12

Dual circuit5 Double fuse6 Single fuse7 Electronic ballast8 Electronic dimming ballast8, 9 Emergency battery backup10

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

8 (20.3)

9 (22.9)

8 (20.3)

Notes

Light center height 36 (91.4) or 30 (76.2)

HYDREL

41 (104.1) or 35 (88.9)

694

8 (20.3)

4 (10.2) G2LBW

1 2 3 4

41-1/2 (105.4) or 35-1/2 (90.2)

8 (20.3)

4 (10.2) G2LBD

5 6 7 8 9 10 11 12

Bollard heights are nominal (shown in inches). All lamps (excluding 35CMT6 and 70CMT6) are coated as recommended unless LPI is specified. MVOLT standard with fluorescent lamps and metal halide lamps with electronic ballast option. Light options are mutually exclusive. Choose one per side. For single circuit wiring, LED light option not available with MVOLT or electronic ballast option operating at 277V, or with 347V. For DCT dual circuit option, secondary LED voltage required to be 120V (for primary voltages: 120V, 208V, 347V, MVOLT) or 240V (for primary voltages 240V or 277V). DCT available with LED color wash option only. SF available with 120V, 277V or 347V on HID fixtures only. DF available with 208V or 240V on HID fixtures only. Electronic ballast options available with metal halide lamps only. 0-10V remote analog dimmer system required (by others). Available with fluorescent only. LPIC recommended for E17 and ED17 lamps. Not available with fluorescent, 35CMT6 or 70CMT6 HID lamps. Standard louver finish: matte black top, high-gloss white bottom unless __/PL is chosen. __/PL is not recommended for DWHG white or other light color finishes due to increased visible glare and reduced fixture cutoff.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use Pole-mounted dome or wedge-shaped enclosures house a range of high-performance optical systems for path, plaza and parking areas. Construction Material: Die-cast aluminum housing and door. Fixture fully sealed with silicone gasketing. All hardware pieces for door and mounting accessories are stainless steel. Suitable for wet location.

Finish: Polyester powder coated in a range of textured or semi-matte gray tone or earth tone colors.

performance and uniformity. All HID sockets are porcelain medium-base or G12 based, pulse rated for 4KV.

Optics Distribution: Area – IES Type II, IES Type III, IES Type IV, IES Type V.

Lens: Molded crowned tempered borosilicate.

Installation Mounting: Luminaire mounts to 4" square or 4" round pole, standard aluminum. A custom 3-3/4" square design pole with center line reveals also available.

Electrical Lamp: HID –150W max. CF – 42W max.

Listings U.L., C.U.L., IP65, IES full cutoff, suitable for wet locations.

Reflector: High-purity anodized specular, semi-specular or patterned lighting sheet in various configurations providing optimum optical performance. Reflectors are interchangeable. Segmented reflectors provide maximum

G2® XTEND Pole Mounted

Ballast: High power factor magnetic ballast standard. Electronic ballast also available. Ballast rated for low starting temperatures.

G2XW

Series

Lamp type

G2XD Xtend dome G2XW Xtend wedge

Metal halide 70M 100M 150M

Ceramic metal halide 70CM 150CM 70CMT6 150CMT6

Options (continued)

High pressure sodium 70S 150S

Fluorescent 26DTT 32TRT 42TRT

Voltage

Distribution

Mounting

Options

120 208 240 220 277 347 120/277 MVOLT1 TB

SR2 SR3 SR4SC SR5S

SPA Square pole mount RPA Round pole mount

Internal accessories2 IBS Internal backlight shield OLS Obscuring lens Photocontrol PE Photocell

Lamped

Finish

LPI Lamp included

Finish DBLB DSPD DNAT DWHG DDBT

Double fuse3 Single fuse3 Electronic ballast4 Electronic dimming ballast4, 5 Bi-level switching6

ADDITIONAL INFORMATION

G2XD

Example: G2XW 150M 277 SR2 SPA OLS SF LPI DNAT

ORDERING INFORMATION

Fusing DF SF Ballast GEB MLEBAD BLS

AREA & WALL MOUNTED

Pole Mounted

PRODUCT INFORMATION

IES Type II IES Type III IES Type IV IES Type V

Designer black, textured Dark gray, textured Natural aluminum, textured Designer white, textured Dark bronze, textured

DSPF Rust, textured DSST Sandstone, textured CF Custom finish Optional two-tone finishes __/GLS Gloss finish on dome/wedge __/POL Polished finish on dome

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. Front 3-3/4 (9.5)

Front 3-3/4 (9.5)

Back

Back 7-3/4 (19.7)

7-3/4 (19.7)

14 (35.6)

12-1/2 (31.8) Side

Side

24 (61.0)

24 (61.0) G2XD

www.hydrel.com | 1-800-750-9773

Notes 1 2 3 4 5 6

MVOLT is standard on all fluorescent or metal halide lamps with electronic ballast option. Accessories are mutually exclusive. Choose one. SF only valid with 120V, 277V or 347V. DF only valid with 208V or 240V; HID only. Electronic ballasts only are available with metal halide lamp types, 150W max. 0-10V dimmer required (by others). BLS only available for 150S.

HYDREL

PSG10

G2XW

695

AREA & WALL MOUNTED

Building Mounted

PRODUCT INFORMATION Intended Use The G2® Block Series may be applied over entries, within entries, up or down, on all building sides or in concert with G2® Edge or G2® Plate products. Lighting distributions are symmetric or asymmetric and project in short, medium and long configurations.

G2 BLOCK Building Mounted ®

Construction Material: Die-cast aluminum housing and door. Fixture fully sealed with silicone gasketing. All hardware for door and mounting accessories are

G2BD

stainless steel. Suitable for wet locations. Finish: Polyester powder coated in a range of textured or semi-matte gray tone or earth tone colors. Optics Distribution: Area – IES Type II, IES Type III, IES Type IV, IES Type V. Reflector: High-purity anodized specular, semi-specular or patterned lighting sheet in various configurations providing optimum optical performance. Reflectors are

interchangeable. Reflectors include both segmented and precision-formed types to provide maximum performance and uniformity. All HID sockets are porcelain medium-base or G12 based, pulse rated for 4KV.

Installation Mounting: Surface mounted over recessed junction box or conduit stub-out. Listings U.L., C.U.L., IP65, IES full cutoff, suitable for wet locations.

Lens: Molded crowned tempered borosilicate. Electrical Lamp: HID – 150W max. CF – 42W max. Ballast: Integrally mounted. Rated for -20°C starting temperatures.

G2BW

Example: G2BD DN 150M 277 SR2 FLC OLS SF LPI DNAT

ORDERING INFORMATION Series

Orientation

G2BD Block dome G2BW Block wedge

DN Downlight UP Uplight

Lamp type

Voltage

Metal halide 70M 100M 150M

Ceramic metal halide 70CM 100CM 150CM 70CMT6 150CMT6

High pressure sodium 70S 150S Fluorescent 26TRT 32TRT 42TRT 2/42TRT

Options 3

Internal accessories IBS Internal backlight shield OLS Obscuring lens CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red

ADDITIONAL INFORMATION

Photocontrol PE Photocell Fusing DF Double fuse4 SF Single fuse4

Ballast GEB MLEBAD BLS

Distribution

120 208 240 277 347 120/277 MVOLT1 TB

VWFL SR2 SR3 SR4SC SR5S

Lamped

Finish

LPI Lamp included

DBLB DSPD DNAT DWHG DDBT DSPF DSST CF

Electronic ballast5 Electronic dimming ballast5, 6 Bi-level switching7

Very wide flood IES Type II IES Type III IES Type IV IES Type V

Lens 2

FLC FLC5

Designer black, textured Dark gray, textured Natural aluminum, textured Designer white, textured Dark bronze, textured Rust, textured Sandstone, textured Custom finish

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 7-1/2 (19.1)

7-3/4 (19.7)

7-1/4 (18.4)

5-7/8 (14.9) 12 Diameter (30.5) G2BD

8 (20.3)

R 6-1/8 (15.6)

8 (20.3) 8 (20.3)

5-3/4 (14.6) 12-1/4 (31.1)

12-1/4 (31.1) G2BW

HYDREL

Notes

696

1 MVOLT is standard on all fluorescent and metal halide lamps with electronic ballast option. 2 Only available with 2/42TRT. 3 Accessories are mutually exclusive. Choose one. 4 SF only valid with 120V, 277V or 347V. DF only valid with 208V or 240V; HID only. 5 Electronic ballasts only are available with metal halide (150W max), fluorescent and MVOLT ballasts. 6 0-10V dimmer required (by others). 7 BLS only available for 150S.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use G2®Edge is uniquely suited for mounting to columns and mullions. Choice of smallscale dome or wedge-shaped enclosures house a wide range of high-performance optical systems for safe and secure perimeter lighting, or accent or wallwash lighting effects. Construction Material: Die-cast aluminum housing and door. Fixture fully sealed with silicone gasketing. All hardware for door and mounting accessories are

stainless steel. Suitable for wet locations. Finish: Polyester powder coated in a range of textured or semi-matte gray tone or earth tone colors. Optics Distribution: Area – IES Type II, IES Type III, IES Type IV, IES Type V. Flood – Narrow spot, spot, flood, wide flood, wall wash.

providing optimum optical performance. Reflectors are interchangeable. Reflectors include both segmented and precision-formed types to provide maximum performance and uniformity. All HID sockets are porcelain medium-base or G12 based, pulse rated for 4KV. Lens: Molded crowned tempered borosilicate.

Ballast: Integrally mounted. Ballasts are 100% factory tested, and rated for -20°C starting temperatures.

® EDGE G2Building Mounted

Installation Mounting: Surface mounted over recessed, compact junction box or conduit stub-out. Listings U.L., C.U.L., IP65, IES full cutoff, suitable for wet locations.

Electrical Lamp: HID – 175W max. CF – 42W max.

Reflector: High-purity anodized specular, semi-specular or patterned lighting sheet in various configurations

AREA & WALL MOUNTED

Building Mounted

PRODUCT INFORMATION

G2EW

G2ED

Example: G2EW DN 150M 277 SR2 STD FLC OLS SF LPI DNAT

ORDERING INFORMATION Series

Orientation

G2ED Edge dome G2EW Edge wedge

DN Downlight UP Uplight

Lamp type

Voltage

Metal halide 70M 100M 150M

Ceramic metal halide 70CM 100CM 150CM 70CMT6 150CMT6

High pressure sodium 70S 150S Fluorescent 26TRT 32TRT 42TRT

Options Internal accessories4 IBS Internal backlight shield OLS Obscuring lens CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red

Photocontrol PE Photocell Fusing5 DF Double fuse SF Single fuse

ADDITIONAL INFORMATION

For additional product information, visit www.hydrel.com.

Ballast GEB MLEBAD BLS

Distribution

120 208 240 277 347 120/277 MVOLT1 TB

NSP SP FL WFL WWD SR2 SR3 SR4SC SR5S

Lamped

Finish

LPI Lamp included

Finish DBLB DSPD DNAT DWHG DDBT DSPF

Electronic ballast6 Electronic dimming ballast6, 7 Bi-level switching8

Narrow spot Spot Flood Wide flood Wall wash3 IES Type II IES Type III IES Type IV IES Type V

Mounting

Lens

STD

FLC FLC5

Standard for mounting on stub-out, or 3" wide or less junction box E4S 4O or 4S junction box cover STDDE Standard direct entry 3/4" NPT

Designer black, textured Dark gray, textured Natural aluminum, textured Designer white, textured Dark bronze, textured Rust, textured

DSST Sandstone, textured CF Custom finish Optional two-tone finish __/ GLS Gloss finish on dome/wedge __/ POL Polished finish on dome

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

3-3/4 (9.5)

5/8 (1.6) 13-3/4 (34.9)

3-3/4 (9.5)

5/8 (1.6) 13-3/4 (34.9)

12-1/4 (31.1)

5-5/8 (14.3)

12-1/4 (31.1)

5-3/4 (14.6)

13-3/4 (34.9)

12-1/4 Diameter (31.1) G2ED

14 (35.6)

13-3/4 (34.9)

G2EW

Notes

PSG10

www.hydrel.com | 1-800-750-9773

MVOLT is standard on all fluorescent and metal halide lamps with electronic ballast option. NSP only available with 70CMT6 and 150CMT6. WWD includes 14" extended wall mount; consult factory. Accessories are mutually exclusive. Choose one. SF only valid with 120V, 277V or 347V. DF only valid with 208V or 240V; HID only. Electronic ballasts only are available with metal halide lamps, 150W max. 0-10V dimmer required (by others). BLS only available for 150S.

HYDREL

1 2 3 4 5 6 7 8

697

AREA & WALL MOUNTED

Building Mounted

PRODUCT INFORMATION Intended Use Ideal for schools, parking garages, walkways, airports and stadiums.

HP3 HP4

Construction Housing: One-piece aluminum die-casting having knockouts for 4-0 box entry or independent surface mounting integrated. Accessories include a cast aluminum splice box for direct conduit entry. This unit also is suitable for pole-, pendant- or basemounted applications. Optics HP3 lens: Molded from clear,

UV stabilized polycarbonate for maximum impact resistance.

and IV distributions are achievable to 180° lateral spread.

HP4 lens: Unit is provided with a vandal-resistant prismatic lens door. This clear polycarbonate lens creates a 180° lateral spread. Flat polycarbonate or tempered glass lens also available.

The lens door seals with silicone gaskets providing bug and water tightness. The door is affixed to the housing with stainless steel tamperproof fasteners.

HP3 distribution: See ordering guide. HP4 distribution: Highperformance three-piece specular reflector assembly is adjustable through a 70° to 85° sharp cutoff range. IES Type III

Lamp type

HP3 HP4

Metal halide HP3 50M 70M 100M 150M1, 2

ADDITIONAL INFORMATION

HP3: 150W max. with medium screw base. HP4: 250W max. with mogul screw base.

Metal halide HP4 200M2 250M2 High pressure sodium HP3 50S 70S

High pressure sodium HP4/HP3 100S 150S1, 2 High pressure sodium HP4 250S2

HP3 PFD PFS RDE SDE

Plaster frame, direct entry Plaster frame, splice box Recessed, direct entry Surface, direct entry

Voltage

Distribution

Lens3

120 208 240 277 347 120/277 TB

HP3 HFW LHW LFW LLW LRW HSC HNC HAC

HP4 FLG Flat lens tempered glass FLP Flat lens polycarbonate

High forward wall Low horizontal wall Low forward wall Low left wall Low right wall High symmetrical ceiling High narrow ceiling High asymmetrical ceiling

Options

Lamped

Finish

Fusing SF Single fuse4 DF Double fuse5 Receptacle PER Photocontrol receptacle1, 2, 6 Re-strike QRS Quartz emergency re-strike Ballast SCWA Super constant wattage ballast7

LPI Lamp included

BL BZ GN GR WH CF

Black Bronze Green Gray White Custom

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 12-3/8 (31.4)

Two 1/4” mounting holes for wall anchor bolts (bolts by others) 2-1/4 (5.7)

Listings U.L., CSA, suitable for wet locations.

Example: HP3 150M 120 HFW SDE SF LPI BL

Mounting HP3 and HP4 BMS Base mount, single PMS Pole, single RSB Recessed, splice box SNB Surface, no box SPM Pendant, single SSB Surface, splice box

Installation Mounting: To surface-mount over recessed 4-0 box, or with recessed post, base or direct conduit. Also available as pendant mount.

Electrical Lamp: Metal halide or high pressure sodium.

ORDERING INFORMATION Series

Ballast: Magnetic, high power factor; minimum starting temperature is -20°F (-29°C).

9 (22.9)

16-3/8 (41.6)

Four 1/4” mounting holes for wall anchor bolts (bolts by others) 12 (30.5)

11-3/8 (28.9)

3-5/8 (9.2)

11-3/8 (28.9)

15-5/8 (39.7)

7 (17.8)

Cast knockouts for 4-0 box mounting

HYDREL

HP3

698

Recessed 4-0 box (by others) HP3

6-1/4 (15.9)

Recessed 4-0 box (by others)

HP4

Cast knockouts for 4-0 box mountings

6-7/8 (17.5)

HP4

Notes 1 2 3 4 5 6 7

Not available with RDE mounting. Not available with RSB mounting. 150W maximum; reflector is not adjustable with this lens. SF only is available with 120V, 277V or 347V on MH only. DF only is available with 208V or 240V on MH only. NEMA twist-lock receptacle only. Photocontrol by others. Required on 200M and 250M metal halide lamps.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use The Hydrel 4760 Series of linear fluorescent lighting fixtures bring the high performance of T5 and T5HO lamps to the outdoors. With the 4760 Series patent-pending Polarpack® cold-weather option, full light output is now a reality to 0°F (-18°C). The T5 and T5HO lamp performance, high-output optical system, and simple architectural lines make this fixture series ideal for spreading soft, even illumination under canopies, covered walkways

and garages. The 4760 Series linear fluorescent offers a high- efficiency fluorescent option to the outdoor lighting market.

Lens: Curved high-strength optical-grade clear acrylic. Internal diffusion film options available. House-side shield, flush source shield.

(-29°C) minimum starting temperature. Polarpack® cold- weather start options and emergency battery backup options are available.

Construction Material: Extruded 6063-T4 aluminum with die-cast A360 aluminum end caps. All fasteners are stainless steel. Tamper-proof hardware.

Electrical Lamp: Fluorescent – 54W max. T5 or T5HO (two lamps).

Installation Ceiling-mounted over recessed box conduit stubout or pendant-mounted is not end-to-end. Various pendant lengths.

Optics Distribution: CNP – Canopy. GRG – Garage. VCNP – Volumetric Canopy.

Socket: G5 miniature bi-pin. Voltage: Multi-volt (120 277V 50/60 Hz), 347V. Ballast: Integral electronic multi-volt, thermally protected, resetting, class P, HPF, A+ sound-rated, -20°F

4760 T5/T5HO Linear Fluorescent Canopy and Parking Garage

AREA & WALL MOUNTED

Site & Area Lighting

PRODUCT INFORMATION

Listings U.L., CUL

Example: 4760 2/54T5HO MVOLT GRG CM LPI DWH

ORDERING INFORMATION Series

Lamp type

Voltage

Distribution

Mounting

4760

2/28T5 Two T5, miniature bi-pin 2/54T5HO Two T5HO, miniature bi-pin

MVOLT 1204 2774 347

CNP Canopy VCNP Volumetric canopy GRG Garage

CM PDMD_ PDMW_

Options External accessories HS House side shield FSS Flush source shield Hardware option TPH Tamper-proof hardware Ballast ELN Emergency battery back-up5 GEB95S 0.95 ballast factor, step dimming3 ADDITIONAL INFORMATION

Polarpack® PLPKX Polarpack® cold-weather start option 120V PLPKY Polarpack® cold-weather start option 347V6 PLPKZ Polarpack® cold-weather start option 208-277V Mounting option EQSM Earthquake seismic mount2

Ceiling mount Pendant mount damp location; specify length 6-48" in 6" increments1 Pendant mount wet location; specify length 6-48" in 6" increments1

Lamped

Finish

LPI 3000K lamp included LP35K 3500K lamp included LP41K 4100K lamp included

DWH BL BZ WH DDB

Gloss white (standard) Black Bronze White Dark bronze

DNA GR SND STG CF

Natural aluminum Gray Sand Steel gray Custom finish

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

4 (10.2) 7-1/2 (19.1)

49-1/2 (125.7)

Notes

PSG10

www.hydrel.com | 1-800-750-9773

HYDREL

1 12" standard length if not specified. 2 Option required for PDMD and PDMW installations located in areas subject to seismic activity. Not available with CM mount. 3 Only available for 2/28T5 lamp type. 4 Only available if ELN is chosen. 5 Must choose 120V or 277V. MVOLT and 347V not available. 6 Not available with ELN or MVOLT.

699

UNDERWATER

Fountain & Reflecting Pool Fixtures

PRODUCT INFORMATION Intended Use The 4426 base mount is designed for use in fountains, reflecting pools and for illuminating waterfalls.

4426 BM LED Base Mount - Monochromatic LED Base Mount - Dynamic RGB

Monochromatic: A non-dimming, one-color light output available in cool white, warm white, amber, blue, cyan, green, royal blue and red monochromatic colors. The system shall be composed of two components: 1) LED array board and 2) driver. The LED driver powers via constant current. With a constant current driver, LED lumen output does not change with temperature variations. Dynamic RGB: This unit uses a red, green and blue (RGB) underwater color-balanced LED array to create DMXcontrolled color changing lighting effects. Color control is achieved through four channels per fixture,

standard DMX512 hardware, at a maximum of 44 frames per second. All channels have logarithmic power for finer color and intensity control. The fourth channel, intensity, allows the user to vary brightness without affecting the color. The integral power supply and DMX control modules are enclosed in an attached sealed bronze combination box. The proprietary DMX control module senses the LED temperature and adjusts the LED power accordingly to yield a lamp life of up to 50,000 hours of operation. This lamp life exceeds any other fixture designed for this use. For power and signal hook-up, the integral combination box includes a minimum of 10' of submersible rated power cable and a minimum of 10' of submersible rated DMX signal cable.

Construction Fixture housing, rock guard and base: Heavy wall cast bronze construction. Natural cast bronze finish.

monochromatic LED (LED board included).

Gasket: Single-piece molded U-shaped silicone gasket.

Control: Standard DMX512. Three channels per fixture: red, blue, green or four channels per fixture: red, green, blue and intensity.

Fasteners: Stainless steel. Cord (monochromatic): Minimum of 10' of #16/3ST submersible rated cord for standard 120VAC line. Cord entrance is epoxy encapsulated. Cord length must be specified. Cord (dynamic RGB): Minimum of 10' of submersible rated data cord for DMX512 signal. Optics Lens: Clear flat tempered borosilicate. Electrical Voltage: 120VAC 60HZ only.

LED (dynamic RGB): 60W RGB LED array. (LED board included.

Low-water protection. Monochromatic: Temperature-sensing, low-water cutoff standard. Dynamic RGB: Temperature sensing circuit reduces power to LEDs to prevent damage. Listings UL Listed. Factory leak tested: Fixtures are tested at 10 PSI (0.70kg/ cm2) internal pressure while totally submerged in water.

LED (monochromatic): 60W

Example: 4426 B 60LED CLW 120 SP FLC BM CSL50

ORDERING INFORMATION Series

Material

LED type

LED color

4426

B Bronze SWB Saltwater bronze

60LED 60W

CLW WMW AMB BLU

Control RGB LED only 3DMX 3-channel DMX 512 4DMX 4-channel DMX 512

Cool white Warm white Amber Blue

GRN RBL RED RGB

Green Royal blue Red Mixing

Communication to fixture

Channel

RGB LED only DDX Direct DMX

RGB LED only ST_ Static1 SQ_ Sequential (specify starting channel)2 CCHAN Custom channels3

ADDITIONAL INFORMATION

Voltage

Distribution

Lens

Mounting

120

SP Spot MFL Medium flood WFL Wide flood

FLC Flat lens clear

BM Base mount

Cord set length

Lamped

CSL_ 10'-120' of cord available in 5' increments

Lamp installed

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 15-1/2 (39.4)

7 (17.8)

5-7/8 (14.9) 7-1/2 (19.0)

7-1/2 (19.0)

HYDREL

Notes

700

1 Static channels â&#x20AC;&#x201C; all fixtures will be programmed with the same set of numbers, specify starting number. 2 Static channels â&#x20AC;&#x201C; all fixtures will be programmed with the same set of numbers, specify starting number. 3 Consult factory.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use The 4426 niche mount is designed for use in fountains, reflecting pools and for illuminating waterfalls.

Monochromatic: These units offer cool white, warm white, amber, blue, cyan, green, royal blue and red monochromatic colors. The system shall be composed of two components: 1) LED array board and 2) driver. The LED driver powers via constant current. With a constant current driver, LED lumen output does not change with temperature variations. Hydrel's monochromatic system is a non-dimming, one-color light output. Dynamic RGB: This unit uses a red, green and blue (RGB) underwater color-balanced LED array to create DMXcontrolled color-changing lighting effects. Color control is achieved through four channels per fixture, standard DMX512 hardware,

bronze construction. Natural cast bronze finish.

60W monochromatic LED. (LED board included.)

Gasket: Single-piece molded U-shaped silicone gasket.

LED type (dynamic): 60W RGB LED array. (LED board included.)

Fasteners: Stainless steel.

Control (dynamic RGB): Standard DMX512. Three channels per fixture: red, blue, green, or four channels per fixture: red, green, blue and intensity.

Cord (monochromatic): Minimum of 10' of #16/3ST submersible rated cord for standard 120VAC line. Cord entrance is epoxy encapsulated. Cord length must be specified. Cord (dynamic RGB): Minimum of 10' of #16/3ST submersible rated cord for standard 120VAC line, minimum of 25' of submersible rated data cord for DMX512 signal. Cord entrance is epoxy encapsulated. Cord length must be specified.

Construction Fixture housing,rock guard and base: Heavy wall cast

4426 NM LED Niche Mount - Monochromatic

UNDERWATER

Fountain & Reflecting Pool Fixtures

PRODUCT INFORMATION

LED Niche Mount - Dynamic RGB

Communication to fixture (dynamic RGB): DMX512 direct. Low-water protection (monochromatic): Temperature-sensing low-water cutoff standard. Lower-water protection (dynamic RGB): Temperaturesensing circuit reduces power to LEDs to prevent damage.

Optics Lens: Clear flat tempered borosilicate.

Listings UL Listed.

Electrical Voltage: 120VAC 60HZ only. LED type (monochromatic):

Factory leak tested: Fixtures are tested at 10 PSI (0.70kg/ cm2) internal pressure while totally submerged in water.

Example: 4426 B 60LED RGB 120 WFL CLS NM 4DMX DDX ST3 CSL50

ORDERING INFORMATION Series

Material

LED type

LED color

Voltage

Distribution

Lens

Mounting

Control

4426

B Bronze SWB Saltwater bronze SS Stainless steel

60LED 60W 96LED 96W

RGB CLW WWW AMB BLU GRN RBL RED

120

WFL Wide flood

CLS Convex lens swim

NM Niche mount

RGB LED only 3DMX 3-channel DMX 512 4DMX 4-channel DMX 512

Communication to fixture RGB LED only DDX Direct DMX

ADDITIONAL INFORMATION

Mixing Cool white Warm white Amber Blue Green Royal blue Red

Channel

Cord set length

Lamped

RGB LED only ST_ Static1 SQ_ Sequential (specify starting channel)2 CCHAN Custom channels3

CSL_ 35'-120' of cord available in 5' increments

LP Lamp included

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 1 (2.5)

2 (5.1) 11-1/4 (28.6)

Niche Direct DMX

8-7/8 (22.5) 7-1/2 (19.1)

Power 4-1/2 (11.3) 1-3/8 (3.5)

9 (22.9)

www.hydrel.com | 1-800-750-9773

Notes 1 All fixtures will be programmed with the same set of numbers, specify starting numbers. 2 Fixtures will be programmed sequentially starting with the number provided by customer. 3 Consult factory.

HYDREL

PSG10

1-3/8 (3.5)

701

UNDERWATER

Fountain & Reflecting Pool Fixtures

PRODUCT INFORMATION Intended Use Lighting for fountains and reflecting pools – base/ yoke mount.

4424 BM/YM 4427 BM/YM

Construction Heavy-duty cast bronze.

Example: 4424 P56500I 120 MFL CLC YM CSL120 LPI

ORDERING INFORMATION Series Lamp type 4424 4427

Voltage Distribution

Incandescent P64500I1 P641000I1 P56300I9 P56500I9

Low-voltage P56240ILV P56300ILV3

ADDITIONAL INFORMATION

12 120

MFL Medium flood NSP Narrow spot WFL Wide flood

Lens CLC CLA CLB CLG CLR

Mounting accessories6 Cord set length

Lamped

Options

BM Base mount YM Yoke mount5 ALB Adjustable locking base

RSR_ 4"-24" riser stem available in 2" increments7

LPI Lamp included

CSA Meets Canadian Standards

Convex lens clear Convex lens amber Convex lens blue Convex lens green Convex lens red

CSL_ 10'-120' of cord available in 5' increments8

For additional product information, visit www.hydrel.com. Notes

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

6-3/4 (17.1) 10-1/2 (26.7)

Mounting

8 (20.3) 10 (25.4

11-3/4 (29.8)

10-3/4 (27.3) 11 (27.9)

12 (30.5)

1 2 3 4 5 6 7 8 9

11 (27.9)

4424

12 (30.5)

Available with 4427 only. Transformer sold separately. Available in WFL only. CLC is the default. Consult www.hydrel.com for yoke mount dimensions. Mounting accessories with ALB only. RSR6 – default with ALB. CSL50 max. cord length for 12V. Available with 4424 only.

4427

Fountain & Reflecting Pool Fixtures

PRODUCT INFORMATION Intended Use Lighting for fountains and reflecting pools – base/ yoke mount.

4800 BM/YM

Construction Heavy-duty cast bronze.

Example: 4800 100Q 120 FL CLC BM CSL90 LP

ORDERING INFORMATION Series

Lamp type

Voltage

Distribution

4800

Incandescent 100Q 150Q Low-voltage1 M75

122 120

FL Flood

ADDITIONAL INFORMATION

HYDREL

CLC CLF CLA CLB CLG CLR

Mounting

Cord set length

Lamped

Options

BM Base mount YM Yoke mount6

CSL_ 10'-120' of cord available in 5' increments7

LP Lamp installed

CSA Meets Canadian Standards

Convex lens clear4 Convex lens frosted Convex lens amber Convex lens blue5 Convex lens green5 Convex lens red

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

702

Lens

Notes 4-1/2 (11.4)

4-1/4 (10.8)

8 (20.3)

1 2 3 4 5 6 7

Other wattages available by request. Transformer sold separately. Distribution included on 12V only. CLC is the default. CLB and CLG not available with 150Q. Consult www.hydrel.com for yoke mount dimensions. CSL50 max. cord length for 12V.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use Lighting for fountains and reflecting pools – niche mount.

4415 NM 4424 NM 4424 NM

4415 NM

Example: 4415 3/M50 12 FL NM 34B RG CSL50 LPI

ORDERING INFORMATION Series Lamp type 4415 4424

Voltage Distribution

Incandescent 4415 1161 200QT3 300QT3 Incandescent 4424 P56300I P56500I1

Low-voltage 12 4415 120 3/M50 3/M75 Low-voltage 4424 P56240ILV P56300ILV1

ADDITIONAL INFORMATION

Lens4

4424 NSP Narrow spot MFL Medium flood WFL Wide flood 4415 FL Flood3

Mounting

Conduit entry

4424 NM Niche 4424 mount 34B 3/4" NPT CLC Convex lens clear4 bottom CLA Convex lens amber 4415 CLB Convex lens blue 34S 3/4" NPT side CLG Convex lens green CLR Convex lens red

Options5

Cord set length7

Lamped

Options

RG Rock guard LLV Louver6

CSL_ 35'-120' of cord available in 5' increments

LPI Lamp included

4424 CSA CSA Certified

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

Notes 5-3/8 (13.7)

2-7/8 (7.3) 1-1/4 (3.2) 6-7/8 (17.5)

11 (27.9)

Louver

10-7/8 (27.6) 7-3/4 (19.7) 5/8 (1.6) 4424

Rock guard

Fountain & Reflecting Pool Fixtures

PRODUCT INFORMATION Intended Use Lighting for fountains and reflecting pools – niche mount.

4800 NM Example: 4800 RD SS 100Q 120 FL CLC NM 3445B CSL75 LP

ORDERING INFORMATION

4800

Material

Lamp type

RD Round, B Bronze Incandescent adjustable SS Stainless 100Q SQ Square, steel7 150Q fixed Low-voltage M751

ADDITIONAL INFORMATION

Voltage Distribution3 Lens 2

12 120

FL Flood

CLC Convex lens clear CLF Convex lens frosted CLA Convex lens amber CLB Convex lens blue5 CLG Convex lens green5 CLR Convex lens red

Mounting

Conduit entry

NM Niche mount

3445B 3/4" at 45°

Options

Cord set length

Lamped

Options

RG Rock CSL_ 35'-120' LPI Lamp CSA Meets guard6, 7 of cord included Canadian available Standards in 5' 8 increments

For additional product information, visit www.hydrel.com.

5-1/2 (14.0)

4-3/4 6-1/8 (12.1) (15.6) 6-5/8 (16.8)

www.hydrel.com | 1-800-750-9773

Notes 1 2 3 4

Other wattage available by request. Transformer sold separately. Distribution included on 12V only. CLC is the default.

5 6 7 8

Not available with 150Q. Required for floor-mounted fixtures. SS material not available with rock guard. CSL50 max. cord length for 12V.

HYDREL

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

PSG10

1 4424: P56300ILV (12V) and P565001 (120V) default. 2 Transformer sold separately. 3 Other distributions available on 3/M50 and 3/M75 only. 4 CLC – default. 5 Required for floor-mounted fixtures. 6 Available with 4415 only. 7 CL50 max. cord length for 12V fixtures.

13 (33.0)

4415

Series Door

UNDERWATER

Fountain & Reflecting Pool Fixtures

PRODUCT INFORMATION

703

UNDERWATER

Fountain & Reflecting Pool Fixtures

PRODUCT INFORMATION Intended Use Lighting for fountains and reflecting pools – base/ yoke mount.

4409 BM

Construction Heavy-duty cast bronze.

Example: 4409 100QT3 120 FLC BM CSL120 LP

ORDERING INFORMATION Series Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

4409

Lamp type

Voltage 1

75QT3 100QT3

12 120

Lens

Mounting

Options

FLC Flat lens clear

BM Base mount

DCFAMB Color filter CSL_ 10'-120' amber of cord available DCFBLU Color filter in 5' blue increments2 DCFGRN Color filter green DCFRED Color filter red Notes

4-3/4 (12.1) 6-1/4 (15.9)

4-1/2 (11.4)

Cord set length

For additional product information, visit www.hydrel.com.

Fountain & Reflecting Pool Fixtures

PRODUCT INFORMATION

4413 BM

Intended Use Lighting for fountains and reflecting pools – base/ yoke mount.

Construction Heavy-duty cast bronze.

Example: 4413 500Q 120 FL FLC BM CSL80 LPI

ORDERING INFORMATION Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 8-7/8 7-1/2 (22.4) (19.1) 3/4 Typ. (1.9) Fixture is height adjustable

4-1/4 Min. (10.8)

Lamp Series type

Voltage

Distribution Lens

Mounting

Cord set length

4413

120

SP Spot FL Flood

BM Base mount

CSL_ 10'-120' LPI Lamp of cord included available in 5' increments

6-5/8 Max. (16.8)

ADDITIONAL INFORMATION

100Q 150Q 200Q 250Q 300QT4 400QT4 500Q

FLC

Flat lens clear FLAM Flat lens amber FLG Flat lens green FLR Flat lens red

Intended Use Lighting for fountains and reflecting pools – base/ yoke mount.

Series Lamp type 4415 Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 10-1/2 (26.7)

4-5/8 (11.6) 9-1/4 (23.5)

5-3/8 (13.7)

HYDREL

CSA Meets Canadian Standards

Construction Heavy-duty cast bronze.

Example: 4415 3/M50 12 FL ALB RSR12 CSL40 LPI

ORDERING INFORMATION

704

Options

Fountain & Reflecting Pool Fixtures

4415 BM/YM

(2.5)

Lamped

For additional product information, visit www.hydrel.com.

PRODUCT INFORMATION

3-1/4 (8.3)

5-1/2 (14.0)

LP Lamp included

1 Transformer sold separately. 2 50' max cord length for 12V fixtures.

6 (152)

ADDITIONAL INFORMATION

Lamped

10 (25.4)

ADDITIONAL INFORMATION

Incandescent 116I Quartz 200Q 300Q Low-voltage 3/M502, 6 3/M752, 6

10 (25.4)

For additional product information, visit www.hydrel.com.

Voltage Distribution2 Mounting 1

12 120

FL Flood

BM Base mount YM Yoke mount7 ALB Adjustable locking base

Mounting accessories3

Cord set length

Lamped

Options

RSR_ 4"-24" CSL_ 10'-120' LPI Lamp CSA Meets riser stem of cord included Canadian available available Standards in 2" increin 5' incre4 5 ments ments

Notes 1 Transformer sold separately. 2 Other distributions available for the 3/M50 and the 3/M75 only. 3 Available with ALB mount only.

4 5 6 7

RSR6 default with ALB. 50' max cord length for 12V fixtures. Available in 12V only. Consult www.hydrel.com for yoke mount dimensions.

1-800-750-9773 | www.hydrel.com

PSG10

Intended Use Swimming pool fixtures. Maximum wattages of each lamp type listed. Lower wattages available; consult www.hydrel.com for more information.

4425 NM SWM 4427 NM SWM Example: 4425 B P56300ILV 12 WFL CLS NM 1B CSL50 SWM LPI

ORDERING INFORMATION Conduit entry

Series Material

Lamp type

Voltage Distribution

Lens

Mounting

4425 4427

Low-voltage1, 2 P56300ILV5 Incandescent P56500I2 P64500I3 P641000I3

121, 2 120

CLS Convex lens swim CLSA Convex lens swim amber CLSB Convex lens swim blue CLSG Convex lens swim green CLSR Convex lens swim red

NM Niche 120V only mount 34B 3/4" NPT bottom 12V only2 1B 1" NPT bottom

B Bronze SS Stainless steel bezel

ADDITIONAL INFORMATION

MFL Medium flood NSP Narrow spot WFL Wide flood

Cord set length

Application

Lamped

13 (33.0)

10-7/8 (27.6)

Notes 1 2 3 4 5

10-7/8 (27.6) 7-3/4 (19.5)

7-3/4 (19.5) 5/8 (1.6)

5/8 (1.6)

4425

4427

12V only; transformer sold separately. Only available with 4425. Only available with 4427. 50' maximum cord length on 12V fixtures. P56300ILV only available with WFL distribution.

Swimming Pool Fixtures

PRODUCT INFORMATION Intended Use Swimming pool fixture.

Material

RD Round SQ Square

Lamp type

B Bronze SS Stainless steel bezel

ADDITIONAL INFORMATION

Voltage Distribution Lens 1

Low-voltage 12 M75 120 Incandescent 100Q 150Q

FL Flood

CLS Convex lens swim CLA Convex lens amber CLB Convex lens blue CLG Convex lens green CLR Convex lens red CLC Convex lens clear

Mounting

Conduit entry Cord set length4

Application

Lamped

NM Niche mount

3445B 3/4" NPT at 45째

SWM Swimming pool

LP Lamp CSA Meets installed Canadian Standards

CSL_ 35'-120' of cord available in 5' increments2

Options

For additional product information, visit www.hydrel.com. 5-1/2 (14.0)

5-1/2 (14.0)

4-3/4 6-1/8 (12.1) (15.6) 6-5/8 (16.8)

www.hydrel.com | 1-800-750-9773

Notes 1 12V only; transformer sold separately. 2 50' maximum cord length on 12V fixtures. 3 Only available with M75 lamp; otherwise leave blank.

HYDREL

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

PSG10

4800 NM SWM Example: 4800 RD B M75 12 FL CL NM 3445B CSL50 SWM LP

ORDERING INFORMATION 4800

Options

CSL_ 35'-120' SWM Swimming LPI Lamp CSA Meets of cord pool included Canadian available Standards in 5' increments4

For additional product information, visit www.hydrel.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

Series Door

UNDERWATER

Swimming Pool Fixtures

PRODUCT PRODUCT INFORMATION INFORMATION

705

UNDERWATER

Accessories

PRODUCT INFORMATION

MISCELLANEOUS

Complementing their underwater lights, is Hydrel’s full line of accessories – manufactured to the high standards required for underwater fountain and pool products.

Low-Voltage Transformers Low-voltage lighting fixtures require that the line voltages be stepped down. This is normally accomplished with a transformer or a series of transformers located in the pool equipment area. Hydrel offers such parts in sizes from 100W to 1000W.

Colored Lenses

Notes Special consideration must be given to the length of cords used with low-voltage underwater fixtures.

Green, red, amber and blue available for most fixtures.

CATALOG NUMBER T1901 T1903 T1904 T1905

DESCRIPTION 100W transformer 300W transformer 1000W transformer 500W transformer

Potting Compound PC21 is a re-enterable potting compound which pours yellow and cures transparent so connections are easily located. It meets NEC requirements for potting underwater junction boxes. 6-1/4 (15.9)

CATALOG NUMBER PC21 PC2112

5-1/8 (13.0)

6-1/4 (15.9)

4-1/2 (11.4)

DESCRIPTION 35 CU. IN. 20 CU. IN.

9-1/2 (24.1)

11 (29.2)

T1903 and T1905 T1904

Cord Seals Constructed of brass with neoprene grommets, these seals are for use in underwater junction boxes for fixture cord entrance seals. CATALOG NUMBER CS14302 CS143022 CS14304 CS14303 CS143032 CS143033

NPT

CORD

1/2 1/2 3/4 3/4 3/4 3/4

18-3 16-3* (3 x 1.5) 18-3 14-3 (2 x 4) 12-3 10-3 (2 x 6)

7/8 (2.2) 7/8 (2.2) 1-1/4 (3.2) 1-1/4 (3.2) 1-1/4 (3.2) 1-1/4 (3.2)

1-1/2 (3.8) 1-1/2 (3.8) 1-3/4 (4.4) 1-3/4 (4.4) 1-3/4 (4.4) 1-3/4 (4.4)

ALB - Adjustable Locking Base This fountain lighting economy base allows for variable fixture height and includes Hydrel’s pro-focus aim-set feature. Multiple riser heights available. A

B C B Standard Stem Length 6” (15.2) 12 (30.5)

SR Strain Relief A threaded cord grip that prevents cord movement from pulling on connections. Used where J-box is mounted above the floor or deck. CATALOG NUMBER

SR50 SR754 SR75

(NPT)

CORD

1/2 3/4 3/4

16-3* 18-3 10-3

7/8 (2.2) 1-1/4 (3.2 1-1/4 (3.2

1-3/8 (3.5)

1-1/2 (3.8) 1-1/2 (3.8)

HYDREL

706

CATALOG NUMBER ALB15 ALB21 ALB22 ALB24 ALB27

10-1/2 (26.7) 12-5/8 (32.1) 8-5/8 (21.9) 7-7/8 (20.0) 11 (27.9) 7 (17.8) 7-11/16 (19.5) 12 (30.5) 8 (20.3) 7-11/16 (19.5) 12 (30.5) 8 (20.3) 7-11/16 (19.5) 12 (30.5) 8 (20.3)

USR Strain Relief 1 Universal strain relief (USR). Strain reliefs, used where J-boxes are mounted flush to floor or deck. Specify for the total number of fixtures to be mounted.

Notes Notes * 18-2/16-1 cord fits SR50 and CS143022 parts.

Specify USR strain reliefs for the total number of fixtures. USR sold separately.

Dimensions are shown in inches (centimeters) unless otherwise noted.

1-800-750-9773 | www.hydrel.com

PSG10

JUNCTION BOXES Hydrel underwater junction boxes are designed for the connection of supply cords from underwater fountain fixtures and service conduits. They feature heavy cast bronze construction, neoprene gaskets, internal ground lugs and stainless steel hardware. All hubs may be tapped either 1/2” NPT or 3/4” NPT with other drillings available upon request. When ordering, specify the catalog number, hub location and hub size. Letters around perimeter indicate side drill locations. Letters within box indicate bottom drill locations.

JB1701 A

JB1705

JB1703

cover G bottom center H

Outside dimensions: 4-3/4” (12.1) dia. x 3” (7.6) deep Inside dimensions: 3-1/2” (8.9) dia. x 2” (5.1) deep (25 cubic inches) Cover may have single 1/2” (1.3) or 3/4” (1.9) hub. Bottom may also have single 1” (2.5) hub.

K G L

K R

M P

N E

J G

D H

Outside dimensions: 7-3/8” (18.8) x 5-3/8” (13.7) x 2-1/2” (6.4) deep Inside dimensions: 6” (15.3) x 4” (10.2) x 2” (5.1) deep (48 cubic inches)

JB1719 (Deck-Mounted)1

A internal cord seal included

to fixture

g ro und sc rews

K G L E M

F G

Outside dimensions: 7-5/8” (19.4) x 6-1/2” (16.5) x 4-7/16” (11.3) deep Inside dimensions: 5-3/16” (13.2) x 4-1/8” (10.5) x 3-11/16” (9.4) deep (62 cubic inches)

Outside dimensions: 7-5/8” (19.4) sq. x 4-3/4” (12.1) deep Inside dimensions: 6” (15.3) sq. x 4” (10.2) deep (144 cubic inches)

www.hydrel.com | 1-800-750-9773

Outside dimensions: 4-1/2” (11.5) dia. x 3-5/8” (9.3) deep

Outside dimensions: 7-5/8” (19.4) x 6-1/2” (16.5) x 4-7/16” (11.3) deep

Inside dimensions: 2-3/4” (7.1) dia. x 2-1/4” (5.8) deep (10 cubic inches)

Inside dimensions: 5-3/16” (13.2) x 4-1/8” (10.5) x 3-11/16” (9.4) deep (62 cubic inches)

Notes 1 Specifically designed for deck or remote wall mountings, this deck junction box meets all the requirements of the NEC. It features cast bronze construction, neoprene gaskets, one hub at each end and two hubs on one side. The entire bottom and one side of the box are suitable for drilling. Fasteners are stainless steel. Dimensions are shown in inches (centimeters) unless otherwise noted.

HYDREL

Bottom may have maximum three 1” (2.5) hubs or two 1-1/4” (3.2) hubs or one 2” (5.1) hub.

PSG10

L K

Outside dimensions: 5-3/8” (13.7) sq. x 2-1/2” (6.4) deep Inside dimensions: 4” (10.2) sq. x 2” (5.1) deep (32 cubic inches)

pool floor

JB1713

JB1711

Ground screws

Bottom may have single 1” (2.5) or 1-1/4” (3.2) hub.

JB1710 C

J K C

Outside dimensions: 4-3/4” (12.1) sq. x 2-1/2” (6.4) deep Inside dimensions: 3” (7.6) sq. x 2” (5.1) deep (18 cubic inches)

Outside dimensions: 3-3/8” (8.6) x 4-3/8” (11.1) x 2-1/2” (6.4) deep Inside dimensions: 3” (7.6) x 2” (5.1) x 2” (5.1) deep (12 cubic inches)

L H

JB 1708

G B

S D

JB1706

UNDERWATER

Accessories

PRODUCT INFORMATION

707