Peerless Lighting Catalog by Alcon Lighting

CONTENTS PENDANT/SURFACE/WALL/RECESSED Contrail ........................................................................ 154-155 Lightline....................................................................... 156-161 Bruno ........................................................................... 162-163 Prima ...................................................................................164 Station..................................................................................165 Lightedge ..................................................................... 166-171 IceTray.......................................................................... 172-175 Cerra ............................................................................ 176-179 Lightfoil........................................................................ 180-181 LightямБn/Lightduct......................................................... 182-183 Envision ....................................................................... 184-185 Classic Round.............................................................. 186-187 Peerless Cove ......................................................................188 Mirage..................................................................................189 Aero/Enzo.............................................................................190 Planar...................................................................................191 Procyon................................................................................192 Focus ...................................................................................193 Quicksilver ...........................................................................194 Wingspan.............................................................................195 OPTION GUIDE ................................................................196 WIRING GUIDE........................................................ 197-198 MOUNTING HARDWARE GUIDE ......................... 199-201

PEERLESS 153

PENDANT

Contrail

PRODUCT INFORMATION

Construction Materials: Die-formed, pre-painted steel housing. Extruded aluminum fillers. Die-cast aluminum end caps. Highly specular aluminum end plates.

CONTRAIL Linear

internal joiners, 4', 8' and 12' sections can be joined to form longer-length fixtures. Optics Shielding: GrateOptic® curved crenulated diffuser of extruded opal acrylic.

Finish: Low gloss, white polyester powder paint standard on fillers and end caps.

Reflectors: Die-formed, highly specular aluminum reflector with a minimum of 98% reflectance.

Fixture length: 4', 8' and 12' individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 3-5/8" for each end cap to determine total Fixture length. Using

Example: CLM9 2 28T5 COA 40FT R8 277 GEB10 ALC LP835 F1/12

ORDERING INFORMATION Series

Number of lamps

CLM9

Emergency (blank) None EL Emergency battery pack4 EC Emergency/ night-light circuit EN Emergency battery pack with night light circuit4

Lamp type

Shielding

Nominal row length1

Maximum section length

Voltage

Ballast

Number of emergency modules

28T5 28W 4' T5 54T5HO 54W 4' T5HO

COA Crenulated opal acrylic

_FT

R4 4' R8 8' R12 12'

120 277 347

GEB10 <10% THD electronic ballast S5 Simply5™ 2 ADEZ Advance® Mark 10® dimming2,3 ECO10 LUTRON® ECO-10 dimming2 OSDIM OSRAM® 0-10V dimming2,3 Reference Ballast Chart on website or consult factory for other options.

Switching

Lamp color

Options

Mounting/Overall suspension

SCT

L/LP No lamp LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI LP830P 3000K 80+ CRI premier6 LP835P 3500K 80+ CRI premier6 LP841P 4100K 80+ CRI premier6 Reference Lamp Chart on website or consult factory for other options.

Mounting

DCT ALC

ADDITIONAL INFORMATION

Single circuit Dual circuit5 Alternate lamping module circuit5

ELH ELS ELS2 GLR GMF

Damp location label EM through-wire with separate feed EM through-wire with single feed Normal feed w/EM separate neutral (dual-feed cord) Fusing (fast blow) Fusing (slow blow)

F1/ F1A/ F2/ F4A/ F4B/ F4C/

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Mounting accessories

T-bar ceiling (universal mounting bracket) T-bar ceiling (UMB with integrated J-Box) Hard ceiling (horizontal J-Box) Grid ceiling IDS 15/16" Grid ceiling IDS 9/16" Grid ceiling IDS clip screw slot

Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

ACG Adjustable cable grippers CP Chicago plenum MCS Matching feed canopy at support OJB Offset J-box at feed location

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3 (7.6) 6 (15.2)

Notes

PEERLESS

1 2 3 4

154

Must be in 4' increments. Not available in 347V. Not available with 28T5 lamp type. Option EL or EN (battery pack) is: a) not permitted with some dimming in the same row (consult factory); b) not permitted in a 4ft section; c) limited to one battery pack per section. 5 For energy savings, in order to maintain the uniform, luminous aesthetic of the lens, SCT (single circuit) paired with dimming, Simply5™ or ALC (alternate lamping module circuit) is recommended over DCT (dual circuit). 6 T5 only.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Die-formed, pre-painted steel recessed housing. Extruded aluminum surface-mounted housing. Extruded aluminum fixedlength suspension yokes. Finish: Satin anodized finish on suspension yokes. Low gloss, white polyester powder paint standard on surface-mounted housing.

® CONTRAIL Parallels

respectively. Fixtures mount to 4' grid or specify surfacemounted option. Optics Shielding: GrateOptic® curved crenulated diffuser of extruded opal acrylic with opaque painted ends.

PENDANT/SURFACE

Contrail

PRODUCT INFORMATION

Reflectors: Die-formed, specular aluminum reflectors.

Fixture length: 4' and 5' individual fixture sections available. Overall Fixture lengths are 4'9" and 5'9"

Example: PLM9 G 2 54T5HO U4 277 GEB80S SCT LP830

ORDERING INFORMATION Series

Ceiling type

Number of lamps

Lamp type

Nominal row length Voltage

Ballast

PLM9

G Lay-in grid S Surface mount

54T5HO 54W 4' T5HO 80T5HO 80W 5' T5HO 28T5 28W 4' T5

U4 4' U5 5'

GEB10 GEB95 GEB115 GEB80 GEB95S GEB80S GEB115S

Switching SCT Single circuit

ADDITIONAL INFORMATION

120 277 3471

<10% THD electronic ballast < 10% THD, 0.95 BF2,4 < 10% THD, 1.15 BF2,4 < 10% THD, 0.8 BF3,4 < 10% THD, 0.95 BF, step dimming2,4 < 10% THD, 0.8 BF, step dimming3,4 < 10% THD, 1.15 BF2,4

LUTRON® ECO-10 dimming4 LUTRON® Hi-lume™ (T5HO only)3,4 OSDIM OSRAM® 0-10V dimming3,4 Reference Ballast Chart on website or consult factory for other options. ECO10 DMHL

Lamp color

Options

Mounting accessories

L/LP No lamp LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI LP830P 3000K 80+ CRI premier lamp2 LP835P 3500K 80+ CRI premier lamp2 LP841P 4100K 80+ CRI premier lamp2 Reference Lamp Chart on website or consult factory for other options.

DL GLR GMF NYC

CP Chicago plenum

Damp location label Fusing (fast blow) Fusing (slow blow) New York City code

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-1/2 (8.9)

1-1/2 (3.8)

3 (7.6)

17 (43.2)

5 (12.7)

17 (43.2)

PLM9 (1) Lamp per diffuser 20 (50.8) 23 (58.4)

PLM9 S (Surface mount)

PLM9 G (Lay-in grid mount)

1 2 3 4

PSG10

www.peerless-lighting.com | 510-845-2760

GEB10 ballast only; 54T5HO only. 28T5 only. 54T5HO only. Not available in 347V.

PEERLESS

Notes

155

PENDANT/SURFACE

Lightline

PRODUCT INFORMATION

LIGHTLINE Indirect

Construction Materials: Extruded aluminum housing. Die-cast aluminum end cap. Finish: Satin anodized standard with custom colors available. End caps painted to match (C110 aluminum paint with satin anodized finish). Fixture length: 4', 8' and 12' individual fixture sections for nominal suspension spacing of 4', 8' and 12'. With the exception of Indirect (010000), 4' sections with T5 or T5HO lamping are only

available when used in a configuration with 8' or 12' sections. Add 1/2" for each end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures. Optics Shielding: Parabolic semispecular aluminum louvers on Indirect/Direct (310921). Perforated steel overlay on Indirect/Open (310923). VisorOpticTM opal acrylic diffuser on Lightvent™ (310902) with T5 or T5HO lamping.

Example: LL1 010000 T8 12FT R12 120 GEB10 SCT LP730 C100 F1/24

ORDERING INFORMATION Lamp type

Series Shielding LL1

010000 Indirect 310902 Lightvent™ 310923 Indirect / open 310921 Indirect / direct

T8 T5 T5HO

Nominal Maximum row length1 section length Voltage

LP735 LP741 LP830 LP835 LP841

No lamp 3000K 70+ CRI8 3500K 70+ CRI8 4100K 70+ CRI8 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

_FT

Lamp color L/LP LP730

R4 4' R8 8' R12 12'

120 277 347

Finish LP830P

3000K 80+ CRI premier lamp9 LP835P 3500K 80+ CRI premier lamp9 LP841P 4100K 80+ CRI premier lamp9 Reference Lamp Chart on website or consult factory for other options.

ADDITIONAL INFORMATION

Reflectors: Die-formed hammertone specular aluminum and pre-painted white steel.

C100 C110 C200 C005 C032 C041 C099

Satin anodized finish Painted silver to match anodized aluminum finish Standard white (low gloss) Soft white (low gloss) White white (gloss) White white (low gloss) Custom color (consult factory)

Number of emergency modules

Ballast GEB <20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 3,5 ADEZ Advance® Mark 10® dimming3,4 ADZT Advance® Mark 7® 0-10V dimming3,4 ECO10 LUTRON® ECO-10 dimming3 DMHL LUTRON® Hi-lume™ (FDB)3,4,5 OSDIM OSRAM® 0-10V dimming3,4,5 Reference Ballast Chart on website or consult factory for other options.

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Options

Mounting/Overall suspension

CFG DL ELH

Mounting F1/ T-bar ceiling (universal mounting bracket) F1A/ T-bar ceiling (UMB with integrated J-box) F2/ Hard ceiling horizontal J-box F4A/ IDS clip 15/16" tee F4B/ IDS clip 9/16" tee F4C/ IDS clip screw slot

Configuration Damp location label EM through-wire with separate feed ELS EM through-wire with single feed ELS2 Normal feed w/EM separate neutral (dual-feed cord) GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code

Emergency

Switching

(blank) None EL Emergency battery pack6 EC Emergency circuit7 EN Emergency battery pack with night-light6

SCT Single circuit

Mounting accessories Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

ACG

Adjustable cable grippers CP Chicago plenum MCS Matching feed canopy at support OJB Offset J-box at feed location

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-1/2 (6.4)

PEERLESS

2-3/4 (7.0)

156

Notes 1 Must be in 4' increments. 2 With the exception of Indirect (010000), 4' sections with T5 or T5HO lamping are only available when used in a configuration with 8' or 12' sections. 3 Not available in 347V. 4 Not available with 28T5 lamp type. 5 Not available with 32T8. 6 Only available on LL1 010000. 7 R4 & R8 with T8 only. 8 T8 only. 9 T5 only.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded aluminum housing. Die-cast aluminum end cap.

® LIGHTLINE Indirect Wall

Optics Reflectors: Die-formed hammertone specular aluminum and pre-painted white steel.

WALL

Lightline

PRODUCT INFORMATION

Finish: Satin anodized standard; custom colors available. End caps painted to match (C110 aluminum paint with satin anodized finish). Fixture length: 4', 8' and 12' individual fixture sections. Add 1/2" for each end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures.

Example: LL1W0 10012 T5 8FT R8 120 GEB10 SCT LP830 C100

ORDERING INFORMATION

Series

Shielding

LL1W

010012

Number of emergency modules

Nominal Lamp type row length1

Maximum section length

Voltage

Ballast

T5 T5HO

R4 4' R8 8' R12 12'

120 277 3473

GEB10 <10% THD electronic ballast S5 SIMPLY5™ 2 ADEZ Advance® Mark 10® dimming2,3 ECO10 LUTRON® ECO-10 dimming2 DMHL LUTRON® Hi-lume™ (FDB)2,3 ADZT Advance® Mark 7® (0-10V)2,3 OSDIM OSRAM® 0-10V dimming2,3,5 Reference Ballast Chart on website or consult factory for other options.

_FT

Lamp color

Finish

L/LP No Lamp LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI LP830P 3000K 80+ CRI premier lamp4 LP835P 3500K 80+ CRI premier lamp4 LP841P 4100K 80+ CRI premier lamp4 Reference Lamp Chart on website or consult factory for other options. ADDITIONAL INFORMATION

C100 C110 C200 C005 C032 C041 C099

Satin anodized finish Painted silver to match anodized aluminum finish Standard white (low gloss) Soft white (low gloss) White white (gloss) White white (low gloss) Custom color (consult factory)

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Emergency

Switching

(blank) None EL Emergency battery pack EC Emergency circuit EN Emergency battery pack w/night-light

SCT Single circuit

Options

Mounting accessories

CFG DL DU GLR GMF ELH ELS ELS2 NYC

EXT 6" extended mount

Configuration Damp location label Dust cover Fusing (fast blow) Fusing (slow blow) EM through-wire with separate feed EM through-wire with single feed Normal feed w/EM separate neutral New York City code

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-1/2 (6.4)

2-1/2 (6.4) 2-3/4 (7.0) 5/8 (1.6)

6 (15.2)

2-3/4 (7.0)

LL1W with EXT 6” Extended Mount

1 2 3 4 5

PSG10

www.peerless-lighting.com | 510-845-2760

Must be in 4' incremets. Not available with 347V. Not available with 28T5. T5 only. Not available with 32T8.

PEERLESS

Notes

157

PENDANT/SURFACE

Lightline

PRODUCT INFORMATION

LIGHTLINE Direct

Construction Materials: Extruded aluminum housing. Die-cast aluminum end cap.

Optics Shielding: Parabolic semispecular aluminum louvers on LLMS and LLMA.

Finish: Satin anodized standard; custom colors available. End caps painted to match (C110 aluminum paint with satin anodized finish).

Reflectors: Specular aluminum and pre-painted white steel. Black perforated steel.

Fixture length: 4', 8' and 12' individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 7/8" for each end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longer-length fixtures.

Example: LLMW 1 54T5HO 12FT R12 120 GEB10 SCT LP835 C041 F1/24

ORDERING INFORMATION Number of lamps Lamp type

Mounting method

Series

LLMW Wall wash (blank) Suspended 1 Surface LLMA Asymetric S mount baffle LLMS Symmetric baffle

54T5HO 54W T5HO SSB Semispecular 28T5 28W T5 baffle 32 32W T81 WPB White painted baffle

Switching Lamp color SCT Single circuit

L/LP No lamp LP730 3000K 70+ CRI7 LP735 3500K 70+ CRI7 LP741 4100K 70+ CRI7 LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI

ADDITIONAL INFORMATION

Baffle2

LP830P

3000K 80+ CRI premier lamp8 LP835P 3500K 80+ CRI premier lamp8 LP841P 4100K 80+ CRI premier lamp8 Reference Lamp Chart on website or consult factory for other options

Nominal Maximum row section length3 length Voltage Ballast

Number of emergency modules

_FT

(blank) 1SE 2SE XSE

R4 4' R8 8' R12 12'

120 277 347

GEB

<20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 4,6 ADEZ Advance® Mark 10® dimming4,5 ADZT Advance® Mark 7® 0-10V dimming4,5 ECO10 LUTRON® ECO-10 dimming4 OSDIM OSRAM® 0-10V dimming4,5,6 Reference Ballast Chart on website or consult factory for other options

Finish

Options

Mounting/Overall suspension

C100 Satin anodized finish C041 White white (low gloss) C099 Custom color (consult factory)

Mounting (blank) Surface mount F1/ T-bar ceiling (universal mounting bracket) F1A/ T-bar ceiling (UMB with integrated J-box) F2 Hard ceiling (horizontal J-box) F4A IDS clip 15/16" tee F4B IDS clip 9/16" tee F4C IDS clip screw slot

ELH ELS ELS2 GMF GLR NYC

Damp location label EM through-wire with separate feed EM through-wire with single feed Normal feed w/EM separate neutral (dual-feed cord) Fusing (fast blow) Fusing (slow blow) New York City code

Emergency

None 1 section 2 sections X sections

(blank) None EL Emergency battery pack EC Emergency night-light circuit EN Emergency battery pack with night-light circuit

Mounting accessories Overall suspension (blank) Surface mount 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

ACG Adjustable cable grippers CP Chicago plenum MCS Matching feed canopy at support OJB Offset J-box at feed location

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

Notes

PEERLESS 158

4 (10.3)

4 (10.3) 3-5/8 (9.2)

3-5/8 (9.2)

LLMW Wall Wash

LLMA Asymmetric Louver

LLMS Symmetric Louver

1 2 3 4 5 6 7 8

T8 available only with LLMA. LLMA and LLMS only. Must be in 4' increments. Not available in 347V. Not available with 28T5. Not available with 32T8. T8 only. T5 only.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded aluminum housing. Die-cast aluminum end cap. Finish: Satin anodized standard; custom colors available. End caps painted to match (C110 aluminum paint with satin anodized finish).

® LIGHTLINE Direct Wall

Optics Shielding: Parabolic semispecular aluminum louvers or white painted louvers on LLWS and LLWA. Reflectors: Specular aluminum and black perforated steel on LLWW.

Fixture length: 2', 3', 4', 8' and 12' individual fixture sections. Add 7/8" for each end cap to determine total Fixture length. Using internal joiners, 2', 3', 4', 8' and 12' sections can be joined to form longer-length fixtures.

LLWW

LLWS LLWA

Example: LLWW D 1 54T5HO 12FT R12 120 ADEZ SCT LP830 C200

ORDERING INFORMATION Number of lamps

Series

Mounting

LLWW Wall wash LLWA Asymmetric baffle LLWS Symmetric baffle

D Wall spacer X 21" Extended arm mount

Number of emergency modules

Ballast GEB

<20% THD electronic ballast (T8 only) GEB10 <10% THD ballast S5 SIMPLY5™ 3,4 ADEZ Advance® Mark 10® dimming 3,5,6 ADZT Advance® Mark 7® 0-10V dimming 3,5,6 ECO10 LUTRON® ECO-10 dimming 3,4,5 OSDIM OSRAM® 0-10V dimming 3,4,6 Reference Ballast Chart on website or consult factory for other options.

ADDITIONAL INFORMATION

WALL

Lightline

PRODUCT INFORMATION

(blank) 1SE 2SE XSE

Baffle2

54T5HO 39T5HO 24T5HO 28T5 21T5 14T5 32 25 17

SSB Semi-specular baffle WPB White painted baffle

4' 54W T5HO 3' 39W T5HO 2' 24W T5HO 4' 28W T5 3' 21W T5 2' 14W T5 4' 32W T81 3' 25W T81 2' 17W T81

Emergency

Switching Lamp color

(blank) None EL Emergency battery pack7 EC Emergency/ night-light circuit EN Emergency battery pack with night-light circuit7

SCT

None 1 section 2 sections X sections

Maximum Nominal row length section length

Lamp type

L/LP No lamp LP730 3000K 70+ CRI8 LP735 3500K 70+ CRI8 LP741 4100K 70+ CRI8 LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI

_FT

LP830P 3000K 80+ CRI premier lamp9 LP835P 3500K 80+ CRI premier lamp9 LP841P 4100K 80+ CRI premier lamp9 Reference Lamp Chart on website or consult factory for other options.

R2 R3 R4 R8 R12

2' 3' 4' 8' 12'

Voltage 120 277 347

Finish

Options

C100 Satin anodized finish C041 White white (low gloss) C099 Custom color (consult factory)

DL Damp location label ELH EM through-wire with separate feed ELS EM through-wire with single feed ELS2 Normal feed w/EM separate neutral GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

4 (10.3)

3-5/8 (9.2) 3-5/8 (9.2)

LLWW Wall Wash X 21” Extended Mount

PSG10

3/8 (1.0) LLWA Asymmetric Louver

www.peerless-lighting.com | 510-845-2760

3/8 (1.0) LLWS Symmetric Louver with D Wall Spacer

1 2 3 4 5 6 7 8 9

LLWA only. LLWA and LLWS only. Not available in 347V. 28T5 and 54T5HO only. Available with 4' 32W T8 lamp type only. Available with 4' 54W T5HO lamp type only. Not available with R2 or R3. T8 only. T5 only.

PEERLESS

21 (53.3)

3-5/8 (9.2)

Notes

159

RECESSED

Lightline

PRODUCT INFORMATION

LIGHTLINE Wall Wash

Construction Housing: Nominal 2" aperture; 2' and 4' lengths available. Housing is die-formed, pre-painted steel. Finish: Black low-gloss standard; white low-gloss also available. Optics Reflector: Specular aluminum and black, perforated steel.

Electrical Lamps: 14W T5, 28W T5, 24W T5HO or 54W T5HO.

Listings Certification: UL and CUL Listed.

Ballast: See ballast options in Ordering Information. Installation Mounting: Lay-in grid ceiling. Flange kit option available for drywall.

Example: LWR9 G 1 54T5HO HOL U4 120 GEB10 C200

ORDERING INFORMATION Series

Ceiling type

Number of lamps Lamp type

Shielding

Length

Voltage Ballast

LWR9 Lightline wall wash

G Lay-in grid

HOL Black perforated reflector (standard)

U2 2' U4 4'

120 277 347

Emergency (blank) EL

None Emergency battery pack3

ADDITIONAL INFORMATION

24T5HO 54T5HO 14T5 28T5

2' 24W T5HO 4' 54W T5HO 2' 14W T5 4' 28W T5

GEB10 <10% THD electronic ballast ADEZ Advance® Mark 10® dimming1,2 ADZT Advance® Mark 7®(0-10V) dimming1,2 DMHL LUTRON® Hi-Lume dimming1,2 ECO10 LUTRON® ECO-10 dimming1 OSDIM OSRAM® 0-10V dimming1,2 Consult factory for other ballast options. TM

Finish

Options

C200 White (low-gloss) C201 Black (low-gloss); standard

FLNG Flange kit (drywall only)

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

3-3/4 (9.5)

PEERLESS

3-1/2 (8.9) LWR9 - 1 T5/T5HO Lamp

160

Notes 1 Not available in 347V. 2 Not available with 14T5, 28T5 or 24T5HO lamps. 3 Available only with 28T5 and 54T5HO.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Housing: Nominal 2-1⁄2" aperture; 2' and 4' lengths available. Housing is dieformed, pre-painted steel.

Reflectors: Die-formed, prepainted white steel. Electrical Lamps: 14W T5, 28W T5, 24W T5HO or 54W T5HO.

Finish: Black low-gloss standard; white low-gloss also available.

Ballast: See ballast options in Ordering Information.

Optics Shielding: Parabolic semispecular aluminum louver.

® LIGHTLINE Symmetric

Listings Certification: UL and CUL Listed.

Installation Mounting: Lay-in grid ceiling. Flange kit option available for drywall.

Example: LSR9 G 1 54T5HO LDL U2 120 GEB10 C201

ORDERING INFORMATION Series

Ceiling type

Number of lamps

Lamp type

Baffle

Length

Voltage

Ballast

LSR9 Lightline symmetric

G Lay-in grid

24T5HO 54T5HO 14T5 28T5

LDL Low-iridescent louver

U2 2' U4 4'

120 277 347

Emergency (blank) EL

None Emergency battery pack3

ADDITIONAL INFORMATION

RECESSED

Lightline

PRODUCT INFORMATION

2' 24W T5HO 4' 54W T5HO 2' 14W T5 4' 28W T5

Finish

Options

C200 White (low-gloss) C201 Black (low-gloss); standard

FLNG Flange kit (drywall only)

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

3-3/4 (9.5)

3-1/2 (8.9) LSR9 - 1 T5/T5HO

1 Not available in 347V. 2 Not available with 14T5, 28T5 or 24T5HO lamps. 3 Available only with 28T5 and 54T5HO.

PSG10

www.peerless-lighting.com | 510-845-2760

PEERLESS

Notes

161

PENDANT

Bruno

PRODUCT INFORMATION

BRUNO

Construction Materials: Die-formed, coldrolled steel housing. Die-cast aluminum flat or sculptured end cap.

end cap to determine total Fixture length. Using internal joiners, 4' and 8' sections can be joined to form longerlength fixtures.

Finish: Fine-textured white polyester powder paint standard; custom colors available. Aluminum drop pan on BRM3 holes always painted C110 aluminum.

Optics Shielding: Die-formed aluminum drop pan with optional opal diffuser overlay on BRM3. Parabolic semispecular aluminum louvers on BRM4. Perforated steel housing on BRM7. Die-formed acrylic diffuser on BRM9.

Fixture length: 4'-3/8" and 8' individual fixture sections for nominal suspension spacing of 4' and 8'. Add 5/8" for each standard end cap or 4" for each optional sculptured

Reflectors: Die-formed specular aluminum.

Example: BRM1 2 54T5HO SPR 40FT R8 120 GEB10 SCT LP830 C210 F1/12

ORDERING INFORMATION Number of lamps Lamp type

Series BRM1 Indirect BRM3 Indirect/ open holes BRM4 Indirect/ direct louver BRM7 Open partially perforated1 BRM9 Open diffuser

Number of emergency modules (blank) 1SE 2SE XSE

None 1 section 2 sections X sections

1 2 3

54T5HO 54W T5HO 28T5 28W T5 32 32W T8

Emergency

Distribution

Reflector

(blank) 65% up, 35% down 20/80 20% up, 80% down 40/60 40% up, 60% down 0/100 0% up, 100% down CLI Center lamp isolater2

SPR Specular (blank) None reflector OPD Opal diffuser

Switching

(blank) None SCT Single circuit EL Emergency battery DCT Dual pack circuit EC Emergency/ night-light circuit EN Emergency battery pack with night-light circuit

ADDITIONAL INFORMATION

Shielding

Lamp color L/LP No lamp LP730 3000K 70+ CRI10 LP735 3500K 70+ CRI10 LP741 4100K 70+ CRI10 LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI

Baffle

Nominal Maximum row section length5 length

SSB Semi specular baffle WPB White painted baffle

_FT

R4 4' R8 8' R12 12'

Voltage Ballast 120 277 347

GEB

<20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 7,8 ADZT Advance® Mark 7® 0-10V dimming6,7 CCR (2) 1.18BF/(1) .88BF9 ECO10 LUTRON® ECO-10 dimming7 OSPSX OSRAM® .71BF (T8 only) Reference Ballast Chart on website or consult factory for other options.

Finish12

Options

Mounting/Overall suspension

C110 Painted silver to match aluminum finish C210 White (finetextured low gloss) C099 Custom color (consult factory)

Mounting F1/ T-bar ceiling (universal mounting bracket) F1A/ T-bar ceiling (UMB with integrated J-box) F2/ Hard ceiling (horizontal J-box) F4A/ Grid ceiling IDS 15/16" F4B/ Grid ceiling IDS 15/16" F4C/ Grid ceiling IDS screw slot

LP830P 3000K 80+ CRI premier lamp11 LP835P 3500K 80+ CRI premier lamp11 LP841P 4100K 80+ CRI premier lamp11 Reference Lamp Chart on website or consult factory for other options.

DU ELH ELS ELS2 GLR GMF NYC SCEP

Damp location label Dust cover EM through-wire w/ separate feed EM through-wire w/ single feed Normal feed w/EM separate neutral Fusing (fast blow) Fusing (slow blow) New York City code Sculptured end cap

Mounting accessories

Overall ACG Adjustable suspension cable grippers 12 12" (standard) 15 15" CP Chicago 18 18" plenum (F1A) 21 21" MCS Matching 24 24" feed XX XX" canopy at support OJB Offset J-box at feed location

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

PEERLESS

1-3/4 (4.4)

162

8-1/4 (21.0) BRM1 Indirect

8-1/4 (21.0) BRM3 Holes BRM4 Louver BRM9 Diffuser

1-3/4 (4.4) 1/2 (1.3)

1-3/4 (4.4) 8-1/4 (21.0) BRM7 Perforated

Notes 1 2 3 4 5 6

BRM7 available in 2 lamp only. Available with BRM4 3 lamp only. BRM4 only. BRM3 and BRM4 only. Must be in 4' increments. Not available with 28T5.

7 8 9 10 11 12

Not available in 347V. Not available with 32T8. Only use with BRM4, 3-lamp, T8 and CLI. T8 only. T5 only (not 54T5HO). On BRM3, drop pan with holes always C110 painted aluminum finish.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Die-formed, coldrolled steel housing. Die-cast aluminum flat or sculptured end cap. Finish: Fine-textured white polyester powder paint standard; custom colors available. Aluminum drop pan on BRW3 holes always painted C110 aluminum. Fixture length: 4'-3/8" and 8' individual fixture sections. Add 5/8" for each standard end cap or 4" for each optional sculptured end cap to determine total Fixture length.

Using internal joiners, 4' and 8' sections can be joined to form longer-length fixtures.

BRUNO WALL

Optics Shielding: Die-formed aluminum drop pan with optional opal diffuser overlay on BRW3. Parabolic semispecular aluminum louvers on BRW4. Perforated steel housing on BRW7. Die-formed acrylic diffuser on BRW9.

WALL

Bruno

PRODUCT INFORMATION

BRW3

BRW4

Reflectors: Die-formed specular aluminum.

BRW7

BRW9

Example: BRW1 2 54T5HO SPR 40FT R8 120 GEB10 2SE SCT LP835 C110 SCEP

ORDERING INFORMATION

Series BRW1 Indirect BRW3 Indirect/open holes BRW4 Indirect louver BRW7 Indirect partially perforated BRW9 Indirect diffuser

Reflector

Shielding

1 2

54T5HO 54W T5HO 28T5 28W T5 32 32W T8

SPR Specular reflector

(blank) None OPD Opal diffuser2

Switching

Lamp color

Finish

Options

SCT Single circuit DCT Dual circuit

L/LP No lamp LP730 3000K 70+ CRI7 LP735 3500K 70+ CRI7 LP741 4100K 70+ CRI7 LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI LP830P 3000K 80+ CRI premier lamp8 LP835P 3500K 80+ CRI premier lamp8 LP841P 4100K 80+ CRI premier lamp8 Reference Lamp Chart on website or consult factory for other options.

C110 Painted silver to match aluminum finish C210 White white (fine-textured low gloss) C099 Custom color (consult factory)

DL DU ELH ELS ELS2 GLR GMF NYC SCEP

Emergency (blank) None EL Emergency battery pack EC Emergency/night-light circuit EN Emergency battery pack with night-light circuit

ADDITIONAL INFORMATION

Nominal row length3

Maximum section length

Voltage

_FT

R4 4' R8 8' R12 12'

120 277 347

Number of emergency modules

Number of lamps Lamp type

Ballast GEB

<20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 4,5 ADEZ Advance® Mark 10® dimming5,6 ECO10 LUTRON® ECO-10 dimming5 OSDIM OSRAM® 0-10V dimming4,5,6 Reference Ballast Chart on website or consult factory for other options.

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

1-3/4 (4.4)

1-3/4 (4.4) 8-1/8 (20.6) BRW1 Indirect BRW7 Perforated

BRW3 Holes BRW4 Louver BRW9 Diffuser

www.peerless-lighting.com | 510-845-2760

1/2 (1.3)

Notes 1 BRW3 and BRW4 only. 2 OPD standard with T5/T5HO; optional with 32T8. 3 Must be in 4' increments. 4 Not available with 32T8. 5 Not available in 347V. 6 Not available with 28T5. 7 T8 only. 8 T5 only.

PEERLESS

PSG10

8-1/8 (20.6)

163

PENDANT

Prima

PRODUCT INFORMATION

PRIMA

Construction Materials: Die-formed, cold-rolled steel housing. Flat steel end plate. Finish: Fine-textured white polyester powder paint standard; custom colors available. Fixture length: 4', 8' and 12' lengths in a single section for exact suspension spacing of 4', 8' and 12'. Add 1/16" for each end plate to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longer-length fixtures.

PRM1 Indirect PRM3 Lightvent™ PRM4 Indirect/ direct PRM6 Fully perforated PRM7 Partially perforated

Number of emergency modules (blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Number of lamps Lamp type1

Reflector

VDR2

1 2 3 4

WHR White reflector (standard) SPR Specular reflector

(blank) None (blank) None CLI Center OPD Opal lamp diffuser isolator (standard for T5/ T5HO)

PEERLESS 164

32W T8 28T5 28W T5 54T5HO 54W T5HO

Emergency

Switching

Lamp color

(blank) None EL Emergency battery pack EC Emergency/ night-light circuit EN Emergency battery pack with night-light circuit

SCT Single circuit DCT Dual circuit

L/LP No lamp LP730 3000K 70+ CRI8 LP735 3500K 70+ CRI8 LP741 4100K 70+ CRI8 LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI

ADDITIONAL INFORMATION

Reflectors: Die-formed pre-painted white steel or specular aluminum.

Example: PRM1 1 32 WHR 40FT R12 120 GEB10 2SE EL SCT LP735 C518 F1/24

ORDERING INFORMATION

Series

Optics Shielding: Partially perforated windows on PRM3. Parabolic semi-specular or white painted aluminum louvers on PRM4 and optional opal acrylic overlay with T5 or T5HO. Fully perforated steel housing on PRM6. Partially perforated housing on PRM7.

Shielding2

Baffle2 SSB Semispecular baffle WPB White baffle

Nominal row length3

Maximum section length Voltage Ballast

_FT

R4 4' R8 8' R12 12'

120 277 347

GEB

<20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 4,7 CCR (2) 1.18BF/(1) .88BF6 ADZT Advance® Mark 7® 0-10V dimming4,5 ECO10 LUTRON® ECO-10 dimming4 OSPSX OSRAM® .71BF (T8 only)8 Reference Ballast Chart on website or consult factory for other options.

Finish

Options

Mounting/Overall suspension

C110 Painted silver to match anodized aluminum finish C518 Textured white (low gloss) C099 Custom color (consult factory)

Mounting F1/ T-bar ceiling (universal mounting bracket) F1A/ T-bar ceiling (UMB with integrated J-box) F2/ Hard ceiling (horizontal J-box) F3/ Rigid stem F4A/ IDS clip 15/16" tee F4B/ IDS clip 9/16" tee F4C/ IDS clip screw slot

LP830P 3000K 80+ CRI premier lamp9 LP835P 3500K 80+ CRI premier lamp9 LP841P 4100K 80+ CRI premier lamp9 Reference Lamp Chart on website or consult factory for other options.

DU ELH ELS ELS2

GLR GMF NYC

Damp location label Dust cover EM through-wire w/ separate feed EM through-wire w/ single feed Normal feed w/ EM separate neutral (dualfeed cord) Fusing (fast blow) Fusing (slow blow) New York City code

Mounting accessories

Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

ACG Adjustable cable grippers (standard) CP Chicago plenum (F1A) MCS Matching feed canopy at support OJB Offset J-box at feed location

For additional product information, visit www.peerless-lighting.com.

CONFIGURATIONS LAMP SERIES OFNUMBER LAMPS TYPE PRM1 1, 2, 3, 4 T8 PRM3, PRM7 2, 3, 4 T8 PRM4 1, 2, 3 T5, T5HO, T8 PRM6 2 T8

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3 (7.6) 9 (22.9) PRM1 Indirect PRM3 Lightvent PRM7 Partially perforated

Notes 3 (7.6)

3 (7.6) 9 (22.9) PRM4 Indirect/Direct

9 (22.9) PRM6 Fully perforated

1 See configuration table for available number of lamps and lamp types per fixture. 2 PRM4 only. 3 Must be in 4' increments. 4 Not available in 347V. 5 Not available with 28T5 lamp type.

6 Only use with PRM4, 3-lamp, T8 and CLI. 7 Not available with 32T8 lamp type. 8 T8 only. 9 T5 only.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded aluminum housing and captive door. Die-cast aluminum end cap. IP65 rated (dust and water tight).

Optics Shielding: Extruded acrylic prismatic lens.

STATION

PENDANT

Station

PRODUCT INFORMATION

Reflectors: Die-formed prepainted white steel.

Finish: Painted silver; custom colors available. Fixture length: 4' and 8' individual fixture sections. Add 6" for each end cap to determine total Fixture length. Request submittal drawings for longer-length fixtures with joined 4' and 8' sections.

Example: STM9 1 54T5HO SPR ASY/SYM 40FT R8 120 GEB10 2SE SCT LP835 C111 F3A/24

ORDERING INFORMATION

Series STM9

Number of lamps Lamp type

Reflector

Shielding

1 2

SPR Specular reflector

ASY/SYM Asymmetric lens uplight, symmetric lens downlight SYM 100% downlight, symmetric lens SYM/SYM Symmetric lens uplight, symmetric lens downlight

Switching SCT Single circuit DCT Dual circuit

54T5HO 54W T5HO 28T5 28W T5 32 32W T8

Lamp color L/LP LP730 LP735 LP741 LP830 LP835 LP841

No lamp 3000K 70+ CRI6 3500K 70+ CRI6 4100K 70+ CRI6 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

ADDITIONAL INFORMATION

LP830P 3000K 80+ CRI premier lamp7 LP835P 3500K 80+ CRI premier lamp7 LP841P 4100K 80+ CRI premier lamp7 Reference Ballast Chart on website or consult factory for other options.

Nominal Maximum row section length1 length Voltage Ballast

Number of emergency modules

_FT

(blank) 1SE 2SE XSE

R4 4' R8 8'

120 277 347

GEB

<20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 2 ADEZ Advance® Mark 10® dimming3,4 ECO10 LUTRON® ECO-10 dimming3 OSDIM OSRAM® 0-10V dimming3,4,5 Reference Ballast Chart on website or consult factory for other options.

Emergency

None 1 section 2 sections X sections

(blank) None EC Emergency/ night-light circuit

Finish

Options

Mounting/Overall suspension

Mounting accessories

C111 Silver finish (DNA) C099 Custom color (consult factory)

ELH EM through-wire w/ separate feed ELS EM through-wire w/ single feed ELS2 Normal feed w/EM separate neutral (dual-feed cord) GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code

Mounting F3A/ Stem mount

ACG Adjustable cable grippers (standard) CP Chicago plenum (F1A) MCS Matching feed canopy at support OJB Offset J-box at feed location

Overall suspension 24 24" 36 36" XX XX"

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-5/16 (8.4) 9-13/16 (24.9) STM9 shown with ASY/SYM

Notes

PSG10

www.peerless-lighting.com | 510-845-2760

Must be in 4' increments. T5/T5HO only. Not available with 347V. Not available with 28T5 lamp type. Not available with 32T8. T8 only. T5 only.

PEERLESS

1 2 3 4 5 6 7

165

PENDANT

Lightedge

PRODUCT INFORMATION

LIGHTEDGE Angular

Construction Materials: Extruded aluminum housing and end cap. Finish: Satin anodized standard; custom colors available. Fixture length: 4', 8' and 12' (deep angular only) individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 4" for each end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longer-length fixtures.

Number of lamps Lamp type

EGSAM1 Shallow indirect1 EGSAM2 Shallow indirect/ open1 EGSAM4 Shallow indirect/ direct1 EGAM1 Deep indirect EGAM2 Deep indirect/open

1 2 3

54T5HO 54W 4' T5HO 28T5 28W 4' T5 32 32W 4' T81,2

Lamp color L/LP LP730 LP735 LP741 LP830 LP835 LP841

No lamp 3000K 70+ CRI9 3500K 70+ CRI9 4100K 70+ CRI9 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

LP830P 3000K 80+ CRI premier lamp10 LP835P 3500K 80+ CRI premier lamp10 LP841P 4100K 80+ CRI premier lamp10 Reference Lamp Chart on website or consult factory for other options.

ADDITIONAL INFORMATION

Baffle

Nominal Maximum row section length4 length Voltage Ballast

Semi_FT specular baffle SSBP Semispecular baffle with perforated shield

R4 4' R8 8' R12 12' 5

Finish

Options

Mounting/Overall suspension

C100

DL DU ELH

Satin anodized finish (standard) C200 Peerless standard white (low gloss) C005 Soft white (low gloss) C032 White white (gloss) C041 White white (low gloss) C099 Custom color (consult factory)

PEERLESS 166

GEB

<20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 6,7 ADEZ Advance® Mark 10® dimming6,8 ADZT Advance® Mark 7® (0-10V) dimming6,8 ECO10 LUTRON® ECO-10 dimming6 OSDIM OSRAM® 0-10V dimming6,7,8 Reference Ballast Chart on website or consult factory for other options.

Damp location label Dust cover EM through-wire with separate feed ELS EM through-wire with single feed ELS2 Normal feed w/EM separate neutral GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Emergency

Switching

(blank) None EL Emergency battery pack EC Emergency circuit EN Emergency battery pack with night-light circuit

SCT Single circuit DCT Dual circuit

Mounting accessories Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

ACG Adjustable cable grippers CP Chicago plenum MCS Matching feed canopy at support OJB Offset J-box at feed location

For additional product information, visit www.peerless-lighting.com.

1-3/4 (4.4)

EGSAM Shallow Angular

120 277 347

Number of emergency modules

SSB

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

8 (20.3)

Reflectors: Die-formed, prepainted white steel; hammertone specular aluminum and specular aluminum. (Material composition varies with lamping and fixture style.)

Example: EGSAM2 2 54T5HO 40FT R8 120 GEB10 2SE EL SCT LP835 C100 F1/24

ORDERING INFORMATION

Series

Optics Shielding: Opal acrylic diffuser overlay above diepunched slots on EGSAM2 and EGAM2. Parabolic semispecular aluminum louvers on EGSAM4.

Notes 2-1/2 (6.4)

7 (17.8) EGAM Deep Angular

1 2 3 4 5 6 7 8 9 10

Available only with 2 lamps. T8 lamp not available with EGSAM4. EGSAM4 only. Must be in 4' increments. Not available with EGSAM2 and EGSAM4. Not available in 347V. Not available with 32 T8 lamp type. Not available with 28T5 lamp type. T8 only. T5 only.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded aluminum housing and end cap. Finish: Satin anodized standard; custom colors available. Fixture length: 4', 8' and 12' individual fixture sections. Add 4" for each end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures.

Optics Shielding: Parabolic semispecular aluminum louvers on EGAW4. Opal acrylic diffuser overlay above diepunched slots on EGAW2 and above louvers on EGAW4.

® LIGHTEDGE Angular Wall

Reflectors: Die-formed, prepainted white steel; hammertone specular aluminum and micro-prismatic acrylic lens. (Material composition varies with lamping and fixture style.)

WALL

Lightedge

PRODUCT INFORMATION

EGAW1 EXT

EGAW2

EGAW4

Example: EGAW1 1 54T5HO 40FT R8 120 GEB10 2SE EL SCT LP835 C100

ORDERING INFORMATION Number of lamps

Series EGAW1 Indirect EGAW2 Indirect/open EGAW4 Indirect/direct

1 21

Emergency (blank) EL EC EN

Lamp type 54T5HO 54W 4' T5HO 28T5 28W 4' T5 32 32W 4' T82

Switching

None Emergency battery pack Emergency circuit Emergency battery pack with night-light circuit

ADDITIONAL INFORMATION

Nominal row length3

Maximum section length

Voltage

Ballast

_FT

R4 4' R8 8' R12 12'

120 277 347

GEB <20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 4,5 ADEZ Advance® Mark 10® dimming4,6 ECO10 LUTRON® ECO-10 dimming4,6 OSDIM OSRAM® 0-10V dimming4,5,6 Reference Ballast Chart on website or consult factory for other options.

Lamp color

SCT Single L/LP circuit LP730 DCT Dual LP735 circuit LP741 LP830 LP835 LP841

No lamp 3000K 70+ CRI7 3500K 70+ CRI7 4100K 70+ CRI7 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

LP830P 3000K 80+ CRI premier lamp8 LP835P 3500K 80+ CRI premier lamp8 LP841P 4100K 80+ CRI premier lamp8 Reference Lamp Chart on website or consult factory for other options.

Number of emergency modules (blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Finish

Options

Mounting accessories

C100 Satin anodized finish (standard) C200 Peerless standard white (low gloss) C005 Soft white (low gloss) C032 White white (gloss) C041 White white (low gloss) C099 Custom color (consult factory)

DL DU ELH

(blank) Flush wall EXT 3" extended mount

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-1/4 (5.7)

2-1/4 (5.7)

7-1/2 (19.1) EGAW Angular Wall

3 (7.6)

7-1/2 (19.1)

EGAW with EXT 3” Extended Mount

Notes

PSG10

www.peerless-lighting.com | 510-845-2760

Not available with T8. 32 T8 not available with EGAW4. Must be in 4' increments. Not available in 347V. Not available with 32T8 lamp type. Not available with 28T5 lamp type. T8 only. T5 only.

PEERLESS

1 2 3 4 5 6 7 8

167

PENDANT

Lightedge

PRODUCT INFORMATION

LIGHTEDGE Curved

Construction Materials: Extruded aluminum housing and end cap. Finish: Satin anodized standard; custom colors available. Fixture length: 4', 8' and 12' (deep curved only) individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 4" for each end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures.

EGSCM1

EGSCM2

Optics Shielding: Opal acrylic diffuser overlay above die-punched slots on EGSCM2 and EGCM2. Parabolic semispecular aluminum louvers on EGSCM4. Reflectors: Die-formed, prepainted white steel; hammertone specular aluminum and specular aluminum. (Material composition varies with lamping and fixture style.)

EGSCM4

Example: EGSCM1 2 54T5HO 40FT R8 120 GEB10 2SE EL SCT LP835 C100 F1/24

ORDERING INFORMATION Number of lamps Lamp type

Series EGSCM1 Shallow indirect1 EGSCM2 Shallow indirect/ open1 EGSCM4 Shallow indirect/ direct1 EGCM1 Deep indirect EGCM2 Deep indirect/ open

1 2 3

Baffle

54T5HO 54W 4' T5HO 28T5 28W 4' T5 32 32W 4' T81,2

SSB

Semi_FT specular baffle SSBP Semispecular baffle with perforated shield

Lamp color L/LP LP730 LP735 LP741 LP830 LP835 LP841

LP830P 3000K 80+ CRI premier lamp10 LP835P 3500K 80+ CRI premier lamp10 LP841P 4100K 80+ CRI premier lamp10 Reference Lamp Chart on website or consult factory for other options.

No lamp 3000K 70+ CRI9 3500K 70+ CRI9 4100K 70+ CRI9 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

ADDITIONAL INFORMATION

Nominal Maximum row section length4 length Voltage Ballast

PEERLESS 168

7 (17.8)

GEB

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Options

Mounting/Overall suspension

C100 Satin anodized finish (standard) C200 Peerless standard white (low gloss) C005 Soft white (low gloss) C032 White white (gloss) C041 White white (low gloss) C099 Custom color (consult factory)

DL DU ELH

Emergency

Switching

(blank) None EL Emergency battery pack EC Emergency circuit EN Emergency battery pack with night-light circuit

SCT Single circuit DCT Dual circuit

Mounting accessories Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

ACG Adjustable cable grippers CP Chicago plenum MCS Matching feed canopy at support OJB Off set J-box at feed location

For additional product information, visit www.peerless-lighting.com.

Notes 1-5/8 (4.1)

8 (20.3) EGSCM Shallow Curved

EGSCM Deep Curved

120 277 347

Finish

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-1/4 (5.7)

R4 4' R8 8' R12 12' 5

Number of emergency modules

1 2 3 4 5 6 7 8 9 10

Available only with 2 lamps. T8 lamp not available with EGSAM4. EGSCM4 only. Must be in 4' increments. 12' only available on EGCM1 and EGCM2. Not available in 347V. Not available with 32 T8 lamp type. Not available with 28T5 lamp type. T8 only. T5 only.

510-845-2760 | www.peerless-lighting.com

PSG10

Optics Shielding: Parabolic semispecular aluminum louvers on EGCW4. Opal acrylic diffuser overlay above diepunched slots on EGCW2 and above louvers on EGCW4.

® LIGHTEDGE Curved Wall

Reflectors: Die-formed, prepainted white steel; hammertone specular aluminum and micro-prismatic acrylic lens. (Material composition varies with lamping and fixture style.)

WALL

Lightedge

PRODUCT INFORMATION

EGCW1 EXT

EGCW2

EGCW4

Example: EGCW1 1 54T5HO 40FT R8 120 GEB10 2SE EL SCT LP835 C100

ORDERING INFORMATION Number of lamps

Series EGCW1 Indirect EGCW2 Indirect/open EGCW4 Indirect/direct

1 21

Emergency

Lamp type 54T5HO 54W 4' T5HO 28T5 28W 4' T5 32 32W 4' T82

Switching

(blank) None EL Emergency battery pack EC Emergency circuit EN Emergency battery pack with nightlight circuit

Nominal Maximum row length3 section length R4 4' R8 8' R12 12'

Voltage

Ballast

120 277 347

GEB <20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 4,6 ADEZ Advance® Mark 10® dimming4,5 ADZT Advance® Mark 7® (0-10V) dimming4,5 ECO10 LUTRON® ECO-10 dimming4 OSDIM OSRAM® 0-10V dimming4,5,6 Reference Ballast Chart on website or consult factory for other options.

Lamp color

SCT Single L/LP circuit LP730 DCT Dual LP735 circuit LP741 LP830 LP835 LP841

ADDITIONAL INFORMATION

_FT

No lamp 3000K 70+ CRI7 3500K 70+ CRI7 4100K 70+ CRI7 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

Number of emergency modules

LP830P 3000K 80+ CRI premier lamp LP835P 3500K 80+ CRI premier lamp8 LP841P 4100K 80+ CRI premier lamp8 Reference Lamp Chart on website or consult factory for other options.

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Finish

Options

Mounting accessories

C100 Satin anodized finish (standard) C200 Peerless standard white (low gloss) C005 Soft white (low gloss) C032 White white (gloss) C041 White white (low gloss) C099 Custom color (consult factory)

DL Damp location label DU Dust cover ELH EM through-wire with separate feed ELS EM through-wire with single feed ELS2 Normal feed w/EM separate neutral GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code

(blank) Flush wall EXT 3" extended mount

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-1/4 (5.7)

2-1/4 (5.7)

7-1/2 (19.1) EGCW Curved Wall

3 (7.6)

7-1/2 (19.1)

EGCW with EXT 3” Extended Mount

Notes

PSG10

www.peerless-lighting.com | 510-845-2760

Not available with T8. 32 T8 not available with EGCW4. Must be in 4' increments. Not available in 347V. Not available with 28T5 lamp type. Not available with 32T8 lamp type. T8 only. T5 only.

PEERLESS

1 2 3 4 5 6 7 8

169

PENDANT

Lightedge

PRODUCT INFORMATION

LIGHTEDGE Rectangular

Construction Materials: Extruded aluminum housing and end cap.

Finish: Satin anodized standard; custom colors available. Fixture length: 4' and 8' individual fixture sections for nominal suspension spacing of 4' and 8'. Add 4" for each end cap to determine total Fixture length. Using internal joiners, 4' and 8' sections can be joined to form longerlength fixtures.

EGRM1 EGRM2 EGRM4 EGRM9

Number of lamps Lamp type Indirect Indirect/open Indirect/direct Indirect/ GrateOptic®

1 2 3

54T5HO 54W 4' T5HO 28T5 28W 4' T5 32 32W 4' T81

Nominal row length2

Maximum section length

_FT

R4 4' R8 8'

Switching Lamp color SCT Single circuit DCT Dual circuit

L/LP LP730 LP735 LP741 LP830 LP835 LP841

Reflectors: Die-formed, pre-painted white steel; hammertone specular aluminum.

Example: EGRM9 2 54T5HO 40FT R8 120 GEB10 2SE EL SCT LP835 C100 F1/24

ORDERING INFORMATION

Series

Optics Shielding: Parabolic semi-specular aluminum louvers on EGRM4. Opal acrylic diffuser overlay above die-punched slots on EGRM2. GrateOptic® crenulated diffuser of extruded opal acrylic on EGRM9.

No lamp 3000K 70+ CRI7 3500K 70+ CRI7 4100K 70+ CRI7 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

ADDITIONAL INFORMATION

LP830P

3000K 80+ CRI premier lamp8 LP835P 3500K 80+ CRI premier lamp8 LP841P 4100K 80+ CRI premier lamp8 Reference Lamp Chart on website or consult factory for other options.

Number of emergency modules

Voltage

Ballast

120 277 347

GEB <20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 3,5 ADEZ Advance® Mark 10® dimming3,4,5 ADZT Advance® Mark 7® (0-10V) dimming3,4,5 ECO10 LUTRON® ECO-10 dimming3,5 OSDIM OSRAM® 0-10V dimming3,4,5 TUDA ULT (0-10V) dimming3,6 Reference Ballast Chart on website or consult factory for other options.

(blank) 1SE 2SE XSE

Finish

Options

Mounting/Overall suspension

C100

DL DU ELH

Satin anodized finish (standard) C200 Peerless standard white (low gloss) C005 Soft white (low gloss) C032 White white (gloss) C041 White white (low gloss) C099 Custom color (consult factory)

Damp location label Dust cover EM through-wire with separate feed ELS M through-wire with single feed ELS2 Normal feed w/EM separate neutral GLR Fusing (fast blow) GMF Fusing (slow blow)

Emergency

None 1 section 2 sections X sections

(blank) None EL Emergency battery pack EC Emergency circuit EN Emergency battery pack with night-light circuit

Mounting accessories Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

ACG Adjustable cable grippers CP Chicago plenum MCS Matching feed canopy at support OJB Off set J-box at feed location

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 1-1/2 (3.8) 8-1/8 (20.6) EGRM Rectangular

PEERLESS

Notes

170

1 Available only with 2 lamps on EGRM1 and EGRM2. 2 Must be in 4' increments. 3 Not available in 347V. 4 Not available with 28T5 lamp type. 5 Not available with 32T8 lamp type. 6 Not available with 54T5HO lamp type. 7 T8 only. 8 T5 only.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials : Extruded aluminum housing and end cap.

louvers on EGRW4. Opal acrylic diffuser overlay above die-punched slots on EGRW2. GrateOptic® crenelated diffuser of extruded opal acrylic on EGRW9.

Finish: Satin anodized standard; custom colors available. Fixture length: 4', 8' and 12' individual fixture section. Add 4" for each end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures.

® LIGHTEDGE Rectangular Wall

Reflectors: Die-formed, prepainted white steel; hammertone specular aluminum and micro-prismatic acrylic lens. (Material composition varies with lamping and fixture style.)

EGRW2

EGRW4

Optics Shielding: Parabolic semi-specular aluminum

Example: EGRW9 1 54T5HO 40FT R12 120 GEB10 2SE EL SCT LP835 C100

ORDERING INFORMATION Series

Number of lamps

EGRW1 Indirect 1 EGRW2 Indirect/open 2 EGRW4 Indirect/ direct EGRW9 Indirect / GrateOptic®

Emergency (blank) EL EC EN

None Emergency battery pack Emergency circuit Emergency battery pack with night-light circuit

ADDITIONAL INFORMATION

WALL

Lightedge

PRODUCT INFORMATION

Maximum Nominal row length1 section length

Lamp type

54T5HO 54W 4' _FT T5HO 28T5 28W 4' T5

R4 4' R8 8' R12 12'

Number of emergency modules

Voltage

Ballast

120 277 347

GEB10 <10% THD electronic ballast S5 SIMPLY5™ 2 ADEZ Advance® Mark 10® dimming2,3 ECO10 LUTRON® ECO-10 dimming2 OSDIM OSRAM® 0-10V dimming2,3 Reference Ballast Chart on website or consult factory for other options.

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Switching

Lamp color

Finish

Options

Mounting accessories

SCT Single circuit DCT Dual circuit

L/LP No lamp LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI LP830P 3000K 80+ CRI premier lamp4 LP835P 3500K 80+ CRI premier lamp4 LP841P 4100K 80+ CRI premier lamp4 Reference Lamp Chart on website or consult factory for other options.

C100 Satin anodized finish (standard) C200 Peerless standard white (low gloss) C005 Soft white (low gloss) C032 White white (gloss) C041 White white (low gloss) C099 Custom color (consult factory)

DL DU ELH ELS ELS2 GLR GMF NYC

(blank) Flush wall EXT 3" extended mount

Damp location label Dust cover EM through-wire with separate feed EM through-wire with single feed Normal feed w/EM separate neutral Fusing (fast blow) Fusing (slow blow) New York City code

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

1-1/2 (3.8) 3 (7.6)

7-1/2 (19.1)

1-1/2 (3.8) 7-1/2 (19.1) EGRW

EGRW with EXT 3” Extended Mount

1 2 3 4

PSG10

www.peerless-lighting.com | 510-845-2760

Must be in 4' increments. Not available in 347V. Not available with 28T5. T5 only.

PEERLESS

Notes

171

PENDANT

IceTray

PRODUCT INFORMATION

ICETRAY Indirect/Direct

Construction Materials: Extruded aluminum spine. Aluminum baffle assembly. Die-cast aluminum end caps on IRM8 and IAM8. Steel end plate with die-cast aluminum end cap on ICM8.

Fixture length: 4', 8' and 12' (1-, 2- and 3-lamp cross sections only) individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 1-1/4" for each rectangular end cap, 1-1/8" for each angular end cap and 1" for each curved end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures.

Finish: Satin anodized or white polyester powder paint standard. Satin anodized finish consists of satin anodized housing, clearcoated aluminum baffles and end caps painted C110 aluminum to match. Custom colors available.

Number of lamps Lamp type

IRM8 Rectangular IAM8 Angular ICM8 Curved

Emergency (blank) None EL Emergency battery pack EC Emergency/ night-light circuit EN Emergency battery pack with night-light circuit

1 2 3 4

Reflector

Shielding

54T5HO 54W (blank) T8: T5HO 70% up, 30% down T5/T5HO: 28T5 28W T5 80% up, 20% down 32 32W T8 50/50 50% up, 50% down3 30/70 30% up, 70% down3 5/95 5% up, 95% down 40/60 40% up, 60% down1

Switching

Lamp color

SCT Single circuit DCT Dual circuit

L/LP LP730 LP735 LP741 LP830 LP835 LP841

ADDITIONAL INFORMATION

No lamp 3000K 70+ CRI3 3500K 70+ CRI3 4100K 70+ CRI3 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

(blank) None OPD Opal diffuser4

LP830P 3000K 80+ CRI premier lamp10 LP834P 3500K 80+ CRI premier lamp10 LP841P 4100K 80+ CRI premier lamp10 Reference Lamp Chart on website or consult factory for other options.

Nominal Maximum row section length5 length Voltage Ballast

Number of emergency modules

_FT

(blank) 1SE 2SE XSE

R4 4' R8 8' R12 12' 6

PEERLESS 172

GEB

<20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 7,8 ADEZ Advance® Mark 10® dimming8,9 ECO10 LUTRON® ECO-10 dimming8 OSDIM OSRAM® 1-10V dimming7,8,9 Reference Ballast Chart on website or consult factory for other options.

Options

Mounting/Overall suspension

C041 White white (low gloss) C100 Satin anodized finish C099 Custom color (consult factory)

Mounting F1/ T-bar ceiling (universal mounting bracket) F1A/ T-bar ceiling (UMB with integrated J-box) F2/ Hard ceiling (horizontal J-box) F3/ Rigid stem mount F4A/ IDS clip 15/16 tee F4B/ IDS clip 9/16 tee F4C/ IDS clip screw slot

DU ELH ELS ELS2 GLR GMF NYC

Damp location label Dust cover11 EM through-wire w/ separate feed EM through-wire w/ single feed Normal feed w/EM separate neutral (dual-feed cord) Fusing (fast blow) Fusing (slow blow) New York City code

Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

None 1 section 2 sections X sections

Mounting accessories ACG Adjustable cable grippers CP Chicago plenum MCS Matching feed canopy at support OJB Offset J-box at feed location

For additional product information, visit www.peerless-lighting.com.

3-1/8 (7.9)

IRM8 Rectangular

120 277 347

Finish

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

9 (22.9)

Reflectors: Die-formed, pre-painted white steel and perforated aluminum side reflector/shield.

Example: ICM8 2 28T5 24FT R12 120 GEB10 DCT LP835 C041 F2/24

ORDERING INFORMATION

Series

Optics Shielding: Straight blade baffle with perforated side reflector/shield. Opal acrylic diffuser overlay optional.

Notes 3-1/8 (7.9)

3-1/2 (8.9) 9-3/4 (24.8) IAM8 Angular

10-1/2 (26.7) ICM8 Curved

1 T5/T5HO only. 2 Recommended for use with dark ceilings only. Use of a VDR (50/50, 40/60, 30/70 and 5/95) reduces fixture efficiency. 3 T8 only. 4 OPD not available with 5/95. 5 Must be in 4' increments. 6 Not available with a 4-lamp cross section. 7 Not available with 32T8. 8 Not available in 347V. 9 Not available with 28T5 lamp type. 10 T5 only. 11 Dust cover not available with 50/50, 30/70, 5/95, 40/60 reflectors.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded aluminum spine. Aluminum baffle assembly. Die-cast aluminum end caps on IRW8 and IAW8. Steel end plate on ICW8. Finish: Satin anodized or white polyester powder paint standard. Satin anodized finish consists of satin anodized housing, clearcoated aluminum baffles and end caps painted C110 aluminum to match. Custom colors available.

Fixture length: 4', 8' and 12' individual fixture sections. Add 1-1/4" for each rectangular end cap, 1-3/8" for each angular end cap and 1/16" for each curved end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures.

® ICETRAY Indirect/Direct Wall

Reflectors: Die-formed, pre-painted white steel and perforated aluminum side reflector/shield.

WALL

IceTray

PRODUCT INFORMATION

IRW8

Optics Shielding: Straight blade baffle with perforated side reflector/shield. Opal acrylic diffuser optional.

IAW8

ICW8

Example: IAW8 2 32 8FT R8 277 ADEZ SCT LP835 C041

ORDERING INFORMATION Number of lamps

Series IRW8 Rectangular IAW8 Angular ICW8 Curved

1 2

Emergency (blank) None EL Emergency battery pack EC Emergency/night-light circuit EN Emergency battery pack with night-light circuit

ADDITIONAL INFORMATION

Lamp type

Shielding1

54T5HO 54W T5HO 28T5 28W T5 32 32W T8

(blank) None OPD Opal diffuser

Switching

Lamp color

SCT Single circuit DCT Dual circuit

L/LP LP730 LP735 LP741 LP830 LP835 LP841

Nominal row length2

Maximum section length

Voltage

Ballast

_FT

R4 4' R8 8' R12 12'

120 277 347

GEB <20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 3,4 ADEZ Advance® Mark 10® dimming4, 5 ECO10 LUTRON® ECO-10 dimming4 OSDIM OSRAM® 1-10V dimming3,4,5 Reference Ballast Chart on website or consult factory for other options

No lamp 3000K 70+ CRI6 3500K 70+ CRI6 4100K 70+ CRI6 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

LP830P 3000K 80+ CRI premier lamp LP834P 3500K 80+ CRI premier lamp7 LP841P 4100K 80+ CRI premier lamp7 Reference Lamp Chart on website or consult factory for other options.

Number of emergency modules

Finish

Options

C041 White white (low gloss) C100 Satin anodized finish C099 Custom color (consult factory)

DL DU ELH ELS ELS2

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Damp location label Dust cover EM through-wire with separate feed EM through-wire with single feed Normal feed w/EM separate neutral (dual-feed cord) GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

3-1/4 (8.3) 5-7/8 (14.9) IRW8 Rectangular Wall

3-1/8 (7.9)

3-1/2 (8.9) 6-1/4 (15.9)

6-5/8 (16.8)

IAW8 Angular Wall

ICW8 Curved Wall

Notes

PSG10

www.peerless-lighting.com | 510-845-2760

IAW8 only. Must be in 4' increments. Not available with 32T8. Not available in 347V. Not available with 28T5. T8 only. T5 only.

PEERLESS

1 2 3 4 5 6 7

173

PENDANT

IceTray

PRODUCT INFORMATION

ICETRAY Direct

Construction Materials: Extruded aluminum spine. Formed aluminum baffle assembly. Die-cast aluminum end cap on IRDM8 and IADM8. Steel end plate with die-cast aluminum end cap on ICDM8.

aluminum to match. Custom colors available. Fixture length: 4', 8' and 12' individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 1-1/4" for each rectangular end cap, 1-3/8" for each angular end cap and 1" for each curved end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures.

Finish: Satin anodized or white polyester powder paint standard. Satin anodized finish consists of satin anodized housing, clearcoated aluminum baffles and end caps painted C110

Series

Number of Mounting method lamps Lamp type

Shielding

IRDM8 Rectangular IADM8 Angular ICDM8 Curved

(blank) Suspended S Surface mount

SBP Perforated side shield OPD Opal diffuser1

(blank) None EL Emergency battery pack EC Emergency/ night-light circuit EN Emergency battery pack with nightlight circuit

1 2

Switching

Lamp color

SCT Single circuit DCT Dual circuit

L/LP LP730 LP735 LP741 LP830 LP835 LP841

ADDITIONAL INFORMATION

Reflectors: Die-formed, pre-painted white steel and perforated aluminum side reflector/shield.

Example: IADM8 1 54T5HO OPD 28FT R12 277 GEB10 SCT LP835 C041 F1/24 ACG

ORDERING INFORMATION

Emergency

Optics Shielding: Straight blade baffle with perforated side reflector/shield or opal diffuser (1-lamp cross section only).

54T5HO 54W T5HO 28T5 28W T5 32 32W T8

No lamp 3000K 70+ CRI6 3500K 70+ CRI6 4100K 70+ CRI6 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

LP830P 3000K 80+ CRI premier lamp7 LP834P 3500K 80+ CRI premier lamp7 LP841P 4100K 80+ CRI premier lamp7 Reference Lamp Chart on website or consult factory for other options

Nominal row length2 _FT

Maximum section length

Voltage

Ballast

R4 4' R8 8' R12 12'

120 277 347

GEB

Number of emergency modules

<20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 3,4 ADEZ Advance® Mark 10® dimming4,5 ECO10 LUTRON® ECO-10 dimming4 OSDIM OSRAM® 1-10V dimming3,4,5 Reference Ballast Chart on website or consult factory for other options.

Finish

Options

Mounting/Overall suspension 8

C041 White white (low gloss) C100 Satin anodized finish C099 Custom color (consult factory)

ELH ELS ELS2 GLR GMF NYC

Damp location label EM through-wire w/ separate feed EM through-wire w/ single feed Normal feed w/EM separate neutral (dual-feed cord) Fusing (fast blow) Fusing (slow blow) New York City code

Overall suspension8 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Mounting accessories 8 ACG Adjustable cable grippers (suspended fixture) CP Chicago plenum MCS Matching feed canopy at support OJB Off set J-box at feed location

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

3-7/8 (9.8)

PEERLESS

3-7/8 (9.8)

174

6-3/8 (16.2)

7 (17.8)

IRDM8 Rectangular with SBP Perforated Side Shield

IADM8 Angular with SBP Perforated Side Shield

3/8 (1.0) 3-7/8 (9.8) 7-1/8 (18.1) ICDM8 Curved with OPD Opal Diffuser and S Surface Mounted

Notes 1 2 3 4 5 6 7 8

Available only with 1-lamp cross section. Must be in 4' increments. Not available with 32T8. Not available with 347V. Not available with 28T5. T8 only. T5 only. Not required with "S" mounting method.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded aluminum spine. Formed aluminum baffle assembly. Die-cast aluminum end cap on IRDW8 and IADW8. Steel end plate with die-cast aluminum end cap on ICDW8.

Fixture length: 4', 8' and 12' individual fixture sections. Add 1-1/4 " for each rectangular end cap, 1-3/8" for each angular end cap and 1" for each curved end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures.

® ICETRAY Direct Wall

Reflectors: Die-formed, prepainted white steel.

WALL

IceTray

PRODUCT INFORMATION

IRDW8

Optics Shielding: Straight blade baffle with opal diffuser (standard brightness or intermediate brightness).

IADW8

ICDW8

Example: IRDW8 1 32 OPI 24FT R12 120 GEB10 SCT LP841 C100

ORDERING INFORMATION Number of lamps Lamp type

Series IRDW8 Rectangular IADW8 Angular ICDW8 Curved

None Emergency battery pack Emergency/night-light circuit Emergency battery pack with night-light circuit

ADDITIONAL INFORMATION

Shielding

54T5HO 54W T5HO 28T5 28W T5 32 32W T8

Emergency (blank) EL EC EN

Nominal row length1

OPI Intermediate brightness opal diffuser (recommended) OPD Opal diffuser

Switching

Lamp color

SCT Single circuit

L/LP LP730 LP735 LP741 LP830 LP835 LP841

_FT

No lamp 3000K 70+ CRI5 3500K 70+ CRI5 4100K 70+ CRI5 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

Maximum section length

Voltage

Ballast

R4 4' R8 8' R12 12'

120 277 347

GEB

LP830P 3000K 80+ CRI premier lamp6 LP834P 3500K 80+ CRI premier lamp6 LP841P 4100K 80+ CRI premier lamp6 Reference Lamp Chart on website or consult factory for other options.

Number of emergency modules

<20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast S5 SIMPLY5™ 2,3 ADEZ Advance® Mark 10® dimming3,4 ECO10 LUTRON® ECO-10 dimming3 OSDIM OSRAM® 1-10V dimming2,3,4 Reference Ballast Chart on website or consult factory for other options. Finish

Options

C041 White white (low gloss) C100 Satin anodized finish C099 Custom color (consult factory)

DL ELH ELS ELS2 GLR GMF NYC

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Damp location label EM through-wire with separate feed EM fhrough-wire with single feed Normal feed w/EM separate neutral (dual-feed cord) Fusing (fast blow) Fusing (slow blow) New York City code

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

3/8 (1.0)

3-7/8 (9.8)

IRDW8 Rectangular Wall

7-1/8 (18.1)

7 (17.8)

6-3/8 (16.2)

3-7/8 (9.8) 3/8 (1.0) IADW8 Angular Wall

3-7/8 (9.8) 3/8 (1.0) ICDW8 Curved Wall

Notes

PSG10

www.peerless-lighting.com | 510-845-2760

Must be in 4' increments. Not available with 32T8. Not available in 347V. Not available with 28T5. T8 only. T5 only.

PEERLESS

1 2 3 4 5 6

175

PENDANT

Cerra

PRODUCT INFORMATION

Construction Materials: Die-formed, coldrolled steel housing. Flat steel end plate standard. Die-cast aluminum end cap optional.

CERRA 7

Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures. Optics Shielding: Die-punched square windows on 7CRM2. Perforated steel and steel baffles on 7CRM3. Partially perforated steel housing on 7CRM7. Opal acrylic diffuser overlay standard on all fixtures.

Finish: Fine-textured white polyester powder paint standard; custom colors available.

7CRM1

Fixture length: 4', 8' and 12' individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 1/16" for each standard end cap or 3" for each optional sculptured end cap to determine total

7CRM2

Reflectors: Die-formed specular aluminum or prepainted white steel.

7CRM3

7CRM7

Example: 7CRM2 2 54T5HO WHR 40FT R12 277 GEB10 DCT LP835 C210 SCEP F1/18

ORDERING INFORMATION Number of lamps

Series 7CRM1 7CRM2 7CRM3 7CRM7

Indirect Indirect/open Lightvent™ Partially perforated

Emergency2,3 (blank) None EL Emergency battery pack EC Emergency/ night-light circuit EN Emergency battery pack with night-light circuit

Lamp type Reflector

Nominal row length1

1 2 3

54T5HO 28T5

_FT

Switching

Lamp color

Finish

SCT Single circuit DCT Dual circuit

L/LP LP830 LP835 LP841 LP830P

C110

ADDITIONAL INFORMATION

WHR White (standard) SPR Specular (not available on 7CRM3)

No lamp 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI 3000K 80+ CRI premier lamp6 LP835P 3500K 80+ CRI premier lamp6 LP841P 4100K 80+ CRI premier lamp6 Reference Lamp Chart on website or consult factory for other options.

C210 C099

Painted silver to match anodized aluminum Textured white white (low gloss) Custom color (consult factory)

Maximum section length

Number of emergency modules2

Voltage

Ballast

R4 4' R8 8' R12 12'

120 277 347

GEB10 <10% THD electronic ballast ADEZ Advance® Mark 10® dimming4,5 ECO10 LUTRON® ECO-10 dimming4 OSDIM OSRAM® 0-10V dimming4,5 Reference Ballast Chart on website or consult factory for other options.

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Options

Mounting/Overall suspension

Mounting accessories

DL DU ELH

Mounting F1/ T-bar ceiling F1A/ F1A T-bar ceiling (UMB with integrated J-box) F2/ Hard ceiling (horizontal J-box) F3/ Rigid stem mount F4A/ IDS clip, 15/16" tee F4B/ IDS clip, 9/16" tee F4C/ IDS clip, screw slot

ACG

Damp location Dust cover EM through-wire with separate feed ELS EM through-wire with single feed ELS2 Normal feed w/EM separate neutral (dual-feed cord) GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code SCEP Sculptured end caps

Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

Adjustable cable grippers CP Chicago plenum MCS Matching feed canopy at support OJB Offset J-box at feed location

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-3/8 (6.0) 7-1/8 (18.1)

PEERLESS

Notes

176

1 Must be in 4' increments. 2 Optional. 3 EL and EC are installed in last 4' of fixture sections and are not available concurrently with each other. Separate feed required for each EL or EC unless ELH is specified. 4 Not available in 347V. 5 Not available with 28T5 lamp type. 6 Not available with 54T5HO lamp type.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Die-formed, coldrolled steel housing. Flat steel end plate standard. Die-cast aluminum end cap optional.

Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures.

CERRA® 10

Reflectors: Die-formed specular aluminum or prepainted white steel.

Optics Shielding: Die-punched square windows on 10CRM2. Perforated steel and steel baffles on 10CRM3. Fully perforated steel housing on 10CRM6. Partially perforated steel housing on 10CRM7. Opal acrylic diffuser standard on all fixtures.

Finish: Fine-textured white polyester powder paint standard; custom colors available. Fixture length: 4', 8' and 12' individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 1/16" for each standard end cap or 4" for each optional sculptured end cap to determine total

PENDANT

Cerra

PRODUCT INFORMATION

10CRM2

10CRM3

10CRM6

10CRM7

Example: 10CRM2 4 32 WHR 40FT R12 120 GEB DCT LP735 C210 SCEP F1/18

ORDERING INFORMATION

Series 10CRM1 10CRM2 10CRM3 10CRM6 10CRM7

Indirect Indirect/open Lightvent™ Fully perforated Partially perforated

Emergency (blank) None EL Emergency battery pack EC Emergency/ night-light circuit EN Emergency battery pack with nightlight circuit

Reflector

1 2 3 4

54T5HO 54W T5HO 28T5 28W T5 32 32W T8

WHR White (standard) SPR Specular2

Lamp color

SCT Single circuit DCT Dual circuit

L/LP No lamp LP730 3000K 70+ CRI6 LP735 3500K 70+ CRI6 LP741 4100K 70+ CRI6 LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI

LP830P 3000K 80+ CRI premier lamp7 LP835P 3500K 80+ CRI premier lamp7 LP841P 4100K 80+ CRI premier lamp7 Reference Lamp Chart on website or consult factory for other options.

Voltage

Ballast

_FT

R4 4' R8 8' R12 12'

120 277 347

GEB

Finish

Options

Mounting/Overall suspension

DL DU ELH

Nominal row length3

C110

C210

C099

Painted silver to match anodized aluminum finish Textured white white (low gloss) Custom color (consult factory)

Number of emergency modules

<20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ADEZ Advance® Mark 10® dimming4,5 ADZT Advance® Mark 7® 0-10V dimming4,5 ECO10 LUTRON® ECO-10 dimming4 Reference Ballast Chart on website or consult factory for other options

Damp location label Dust cover EM through-wire with separate feed ELS EM through-wire with single feed ELS2 Normal feed w/EM separate neutral (dual-feed cord) GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code SCEP Sculptured end caps

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Mounting accessories Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

ACG

Adjustable cable grippers CNS 5" feed canopy (F1) CP Chicago plenum JBS J-box at support MCS Matching feed canopy at support

For additional product information, visit www.peerless-lighting.com.

CONFIGURATIONS NUMBER OF LAMPS 1, 2, 3, 4 2, 3, 4 1, 2, 3 2, 3, 4 2 2, 3, 4

LAMP TYPE T8 T8 T5, T5HO T8 T8 T8

www.peerless-lighting.com | 510-845-2760

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-5/8 (6.7) 10 (25.4)

2-5/8 (6.7) 10 (25.4)

Notes 1 Specify number of lamps and lamp type. See configuration table. 2 Not available with 10CRM3. 3 Must be in 4' increments. 4 Not available in 347V. 5 Not available with 28T5. 6 T8 only. 7 T5 only.

PEERLESS

PSG10

Lamp type1

Switching

ADDITIONAL INFORMATION

SERIES 10CRM1 10CRM2 10CRM3 10CRM3 10CRM6 10CRM7

Number of lamps1

Maximum section length

177

PENDANT

Cerra

PRODUCT INFORMATION

CERRA ID

Construction Materials: Die-formed, coldrolled steel housing. Flat steel end plate standard. Die-cast aluminum end cap optional.

end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures.

Finish: Fine-textured white polyester powder paint standard; custom colors available.

Optics Shielding: Parabolic semispecular aluminum louvers (SSB), white-painted parabolic louvers (WPB), whitepainted steel baffle (SBL) or white-painted perforated steel baffle (PPL). Opal acrylic diffuser overlay optional.

Fixture length: 4', 8' and 12' individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 1/16" for each standard end cap or 4" for each optional sculptured

Example: 10CRM4 2 32 WHR SSB 40FT R12 120 GEB DCT LP735 SCEP F1/18

ORDERING INFORMATION

Series

Number of lamps Lamp type

10CRM4 Indirect/ 1 direct 2 3

Emergency (blank) None EL Emergency battery pack EC Emergency/ night-light circuit EN Emergency battery pack with night-light circuit

54T5HO 54W T5HO 28T5 28W T5 32 32W T8

PEERLESS 178

Reflector

VDR

Shielding

40/60 40% (blank) None WHR 65% up, up, 35% OPD Standard 60% down brightness down (standard) diffuser 1 20/80 20% SPR Specular up, 80% down 0/100 0% up, 100% down CLI Center lamp isolator2

Switching

Lamp color

SCT Single circuit DCT Dual circuit

L/LP No lamp LP730 3000K 70+ CRI6 LP735 3500K 70+ CRI6 LP741 4100K 70+ CRI6 LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI

ADDITIONAL INFORMATION

Reflectors: Die-formed specular aluminum or prepainted white steel.

Finish LP830P 3000K 80+ CRI premier lamp7 LP835P 3500K 80+ CRI premier lamp7 LP841P 4100K 80+ CRI premier lamp7 Reference Lamp Chart on website or consult factory for other options.

C110

C210 C099

Painted silver to match anodized aluminum finish Textured white white (low gloss) Custom color (consult factory)

Baffle SSB Semi specular SBL White steel blade PPL White perforated steel baffle WPB White baffle (prefinished or painted)

Nominal Max. row section length3 length _FT

R4 4' R8 8' R12 12'

Voltage Ballast 120 277 347

GEB

<20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast ADEZ Advance® Mark 10® dimming4 ADZT Advance® Mark 7® 0-10V dimming4,5 ECO10 LUTRON® ECO-10 dimming4 Reference Ballast Chart on website or consult factory for other options.

Options

Mounting/Overall suspension

DL DU ELH

Mounting F1/ T-bar ceiling F1A/ F1A T-bar ceiling (UMB with integrated J-Box) F2/ Hard ceiling (horizontal J-box) F3/ Rigid stem mount F4A/ IDS clip, 15/16" tee F4B/ IDS clip, 9/16" tee F4C/ IDS clip, screw slot

Number of emergency modules (blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Mounting accessories

Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

ACG CP MCS OJB

Adjustable cable grippers Chicago plenum Matching feed canopy at support Off set J-box at feed location

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

2-5/8 (6.7) 10 (25.4)

Notes 1 Available with standard distribution only. 2 Available with 3-lamp cross section only. 3 Must be in 4' increments.

4 5 6 7

Not available in 347V. Not available with 28T5. T8 only. T5 only.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Die-formed, coldrolled steel housing. Flat steel end plate standard. Die-cast aluminum end cap optional.

to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longerlength fixtures.

Finish: Fine-textured white polyester powder paint standard; custom colors available.

Optics Shielding: Die-punched square windows on CRW2. Perforated steel windows on CRW3. White-painted steel baffle with optional perforated housing on CRW4. Partially perforated steel housing on CRW7. Opal

Fixture length: 4', 8' and 12' individual fixture sections. Add 1/16" for each standard end cap or 4" for each optional sculptured end cap

CERRA® WALL

acrylic diffuser overlay standard on all fixtures. Reflectors: Die-formed specular aluminum or prepainted white steel.

WALL

Cerra

PRODUCT INFORMATION

CRW1

Listings UL Listed to US and Canadian safety standards.

CRW2

CRW3

CRW4

CRW7

Example: CRW2 1 54T5HO WHR 40FT R12 277 GEB10 SCT LP835 C210 SCEP

ORDERING INFORMATION Number of lamps

Series CRW1 CRW2 CRW3 CRW4

Indirect Indirect/open Lightvent Indirect/ direct CRW7 Partial perforated

Number of emergency modules (blank) 1SE 2SE XSE

None 1 section 2 sections X sections

1 2

Lamp type

Shielding1

Reflector

54T5HO 54W T5HO 28T5 28W T5 32 32W T8

(blank) None PERF Perforations above baffle

WHR White reflector (standard) SPR Specular reflector

Nominal row length2

Maximum Section Length

Voltage Ballast

_FT

R4 4' R8 8' R12 12'

120 277 347

Emergency

Switching

Lamp color

Finish

(blank) None EL Emergency battery pack EC Emergency/ night-light circuit EN Emergency battery pack with night-light circuit

SCT DCT

L/LP LP730 LP735 LP741 LP830 LP835 LP841 LP830P LP835P LP841P

C110

ADDITIONAL INFORMATION

Single circuit Dual circuit

No lamp 3000K 70+ CRI7 3500K 70+ CRI7 4100K 70+ CRI7 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI 3000K 80+ CRI premier lamp8 3500K 80+ CRI premier lamp8 4100K 80+ CRI premier lamp8

C210 C099

GEB <20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast ADEZ Advance® Mark 10® dimming3,4,5 ECO10 LUTRON® ECO-10 dimming3,4 OSDIM OSRAM® 0-10V dimming3,4,5 TUDA ULT (0-10V) dimming3,6 Reference Ballast Chart on website or consult factory for other options.

Options Painted silver to match anodized aluminum Textured white white (low gloss) Custom color

DL DU ELH ELS ELS2 GLR GMF NYC SCEP

Damp location label Dust cover EM through-wire with separate feed EM through-wire with single feed Normal feed w/EM separate neutral (dual-feed cord) Fusing (fast blow) Fusing (slow blow) New York City code Sculptured end caps

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-3/4 (7.0) 7-5/8 (19.4)

Notes

PSG10

www.peerless-lighting.com | 510-845-2760

CRW4 only. Must be in 4' increments. Not available in 347V. Not available with 28T5. Not available with 32T8. Not available with 54T5HO. T8 only. T5 only.

PEERLESS

1 2 3 4 5 6 7 8

179

WALL

Lightfoil

PRODUCT INFORMATION

Construction Materials: Extruded aluminum housing and cylinders (optional). Composite foil of two sheets of aluminum laminated to extruded thermoplastic core material.

LIGHTFOIL 2

Optics Reflectors: Die-formed, prepainted white steel; hammertone specular aluminum and specular aluminum.

Finish: Foil available in bronze, silver or white. Housing and cylinders painted to match. Fixture length: 21-5/8", 43", 53", 65" and 76" individual fixture sections with cylinders. 16", 35", 45", 57" and 69" individual fixture sections without cylinders.

Example: LF2FW 2 24T5HO U2 120 GEB10 SCT L/LP C224

ORDERING INFORMATION Series Number of lamps LF2FW

Switching SCT DCT

Single circuit Dual circuit6

ADDITIONAL INFORMATION

Nominal row length

Lamp type 24T5HO 39T5HO 54T5HO 80T5HO 28T5 21T5 14T5 42TRT

24W 2' T5HO 39W 3' T5HO 54W 4' T5HO 80W 5' T5HO2 28W 4' T5 21W 3' T5 14W 2' T5 Sconce (1 lamp only)2

U1 U2 U3 U4 U5

1' 2' 3' 4' 5'

Voltage

Ballast

Emergency

120 277 347

GEB10 <10% THD electronic ballast S5 SIMPLY5™ 2,3,5 ADEZ Advance® Mark 10® dimming2,3,4,5 ADZT Advance® Mark 7® 0-10v dimming2,3,4,5 ECO10 LUTRON® ECO-10 dimming2,5 OSDIM OSRAM® 0-10V dimming2,3,4,5 Reference Ballast Chart on website or consult factory for other options.

(blank) EL EC EN

Lamp color

Finish

L/LP No lamp LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI LP830P 3000K 80+ CRI premier lamp7 LP835P 3500K 80+ CRI premier lamp7 LP841P 4100K 80+ CRI premier lamp7 Reference Lamp Chart on website or consult factory for other options.

C222 C223 C224

None Emergency battery pack3 Emergency circuit Emergency battery pack with night-light circuit3

Options Bronze Silver White

DL FEP GLR GMF NYC

Damp location label Flat endplate (no cylinder) Fusing (fast blow) Fusing (slow blow) New York City code

For additional product information, visit www.peerless-lighting.com.

LAMP TYPE

LENGTH

42TRT 14T5, 24T5H0 21T5, 39T5HO 28T5, 54T5HO 80T5HO

16" 35" 45" 57" 69"

LENGTH WITH CYLINDERS 21-5/8" 43" 53" 65" 76"

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-3/4 (7.0)

4-7/8 (12.4) 11-3/4 (29.8)

PEERLESS

Notes

180

1 2 3 4 5 6 7

Sconce only. Not available in 347V. Available with U4 only. Not availabe with 28T5 lamp type. Not available with 42TRT or 80T5HO. Does not apply to sconce. T5 only.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded aluminum housing and cylinders (optional). Composite foil of two sheets of aluminum laminated to extruded thermoplastic core material.

LIGHTFOIL® 3

57" and 69" individual fixture sections without cylinders. Optics Reflectors: Die-formed, prepainted white steel; hammertone specular aluminum and specular aluminum.

WALL

Lightfoil

PRODUCT INFORMATION

Finish: Foil available in bronze, silver or white. Housing and cylinders painted to match. Fixture length: 21-5/8", 43", 53", 65" and 76" individual fixture sections with cylinders. 16", 35", 45",

Example: LF3FW 3 24T5HO U2 120 GEB10 SCT L/LP C224

ORDERING INFORMATION Series Number of lamps LF3FW

1 3 4

SCT DCT

Lamp type 24T5HO 39T5HO 54T5HO 80T5HO 28T5 21T5 14T5 57TRT

Switching

Nominal row length

24W 2' T5HO 39W 3' T5HO 54W 4' T5HO 80W 5' T5HO2 28W 4' T5 21W 3' T5 14W 2' T5 Sconce (1 lamp only)2

U1 U2 U3 U4 U5

1' 2' 3' 4' 5'

Voltage

Ballast

Emergency

120 277 347

GEB10 <10% THD electronic ballast S5 SIMPLY5™ 2,4,7 ADEZ Advance® Mark 10® dimming2,3,4,7 ADZT Advance® Mark 7® 0-10V dimming2,3,4,7 ECO10 LUTRON® ECO-10 dimming2,7 OSDIM OSRAM® 0-10V dimming2,3,4,7 Reference Ballast Chart on website or consult factory for other options.

(blank) EL EC EN

Lamp color

Single circuit Dual circuit5

ADDITIONAL INFORMATION

Finish

L/LP No lamp LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI LP830P 3000K 80+ CRI premier lamp6 LP835P 3500K 80+ CRI premier lamp6 LP841P 4100K 80+ CRI premier lamp6 Reference Lamp Chart on website or consult factory for other options.

C222 C223 C224

None Emergency battery pack4 Emergency circuit Emergency battery pack with night-light circuit4

Options Bronze Silver White

DL FEP GLR GMF NYC

Damp location label Flat endplate (no cylinder) Fusing (fast blow) Fusing (slow blow) New York City code

For additional product information, visit www.peerless-lighting.com.

LAMP TYPE

LENGTH

57TRT 14T5, 24T5HO 21T5, 39T5HO 28T5, 54T5HO 80T5HO

16" 35" 45" 57" 69"

LENGTH WITH CYLINDERS 21-5/8" 43" 53" 65" 76"

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 3-3/4 (9.5)

6-1/4 (15.9)

14-3/8 (36.5)

Notes

PSG10

www.peerless-lighting.com | 510-845-2760

Sconce only. Not available in 347V. Not available with 28T5 lamp type. Available with U4 only. Does not apply to sconce. T5 only. Not available with 57TRT or 80T5HO.

PEERLESS

1 2 3 4 5 6 7

181

PENDANT

Diminutive

PRODUCT INFORMATION

Construction Materials: Extruded aluminum housing. Die-cast aluminum end cap.

LIGHTFIN ® LIGHTDUCT

Finish: Satin anodized or white polyester powder paint standard. End caps painted to match (C110 aluminum paint with satin anodized finish). Custom colors available.

internal joiners, 4', 8' and 12' sections can be joined to form longer-length fixtures. Optics Shielding: Die-punched slot pattern with opal diffuser overlay. Reflectors: Die-formed, prepainted white steel and hammertone specular aluminum.

Fixture length: 4', 8' and 12' individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 4-1/2" for each end cap to determine total Fixture length. Using

Example: LDM1 1 54T5HO 24FT R12 120 GEB10 2SE EL SCT LP835 C005 F1/24

ORDERING INFORMATION Lamp Number of lamps type

Series LFM1 Lightfin indirect LFM2 Lightfin indirect/ open LDM1 Lightduct indirect LDM2 Lightduct indirect/ open

Switching SCT DCT

1 2 3

Nominal row length

54T5HO 28T5

_FT

Lamp color

Finish

L/LP LP830 LP835 LP841 LP830P

C100 C110

Single circuit Dual circuit

No lamp 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI 3000K 80+ CRI premier lamp4 LP835P 3500K 80+ CRI premier lamp4 LP841P 4100K 80+ CRI premier lamp4 Reference Lamp Chart on website or consult factory for other options.

ADDITIONAL INFORMATION

C200 C005 C032 C041 C099

Number of emergency modules

Maximum section length

Voltage

Ballast

R4 4' R8 8' R12 12'

120 277 347

Satin anodized finish Painted silver to match anodized aluminum finish Peerless standard white (low gloss) Soft white (low gloss) White white (gloss) White white (low gloss) Custom color (consult factory)

(blank) 1SE 2SE XSE

Options

Mounting/Overall suspension

Mounting F1/ T-bar ceiling (universal mounting bracket) F1A/ T-bar ceiling (UMB with integrated J-box) F2/ Hard ceiling (horizontal J-box) F4A/ IDS clip 15/16" tee F4B/ IDS clip 9/16" tee F4C/ IDS clip screw slot

DU ELH ELS ELS2 GLR GMF

Damp location label Dust cover EM through-wire w/ separate feed EM through-wire w/ single feed Normal feed w/EM separate neutral (dual-feed cord) Fusing (fast blow) Fusing (slow blow)

Emergency

None (blank) None 1 section EL Emergency battery pack 2 sections Emergency/ X sections EC night-light circuit EN Emergency battery pack with night-light circuit

Mounting accessories Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

ACG CP MCS OJB

Adjustable cable grippers Chicago plenum Matching feed canopy at support Offset J-box at feed location

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-1/8 (5.4)

2-1/8 (5.4) 6-1/2 (16.5)

PEERLESS

LFM Lightfin

182

6-1/2 (16.5) LDM Lightduct

Notes 1 2 3 4

Must be in 4' increments. Not available in 347V. Not available with 28T5 lamp type. T5 only.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded aluminum housing. Die-cast aluminum end plate. Finish: Satin anodized or white polyester powder paint standard. End caps painted to match (C110 aluminum paint with satin anodized finish). Custom colors available.

LIGHTFIN®® LIGHTDUCT

Optics Reflectors: Die-formed, pre-painted white steel; hammertone specular aluminum and microprismatic acrylic lens.

Wall

Fixture length: 2', 3', 4', 8' and 12' individual fixture sections. Add 1/4" for each end cap to determine total Fixture length. Request submittal drawings for longer-length fixtures with joined 4', 8' and 12' sections.

LFDW

LDDW

Example: LDDW 010003 T5HO 40FT R12 120 GEB10 LP835 C100

ORDERING INFORMATION Series

Shielding

Lamp type

Nominal row length

LFDW Lightfin LDDW Lightduct

010003 Indirect

T5 T5HO

_FT

Emergency (blank) EL EC EN

WALL

Diminutive

PRODUCT INFORMATION

None Emergency battery pack3 Emergency circuit Emergency battery pack with night-light circuit3

ADDITIONAL INFORMATION

Maximum section length R2 R3 R4 R8 R12

2' 3' 4' 8' 12'

Number of emergency modules

Voltage

Ballast

120 277 347

GEB10 <10% THD electronic S5 SIMPLY5™ 1,3 ADEZ Advance® Mark 10® dimming1,2,3 ADZT Advance® Mark 7® 0-10V dimming1,2,3 ECO10 LUTRON® ECO-10 dimming1 OSDIM OSRAM® 0-10V dimming1,2,3 Reference Ballast Chart on website or consult factory for other options.

Switching

Lamp color

Finish

SCT Single circuit

C005 C032 C041 C100 C110 C200 C099

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Options Soft white (low gloss) White white (gloss) White white (low gloss) Satin anodized finish Painted silver to match anodized aluminum finish Peerless white (low gloss) Custom color

DL DU ELH

Damp location label Dust cover EM through-wire w/ separate feed ELS EM through-wire w/ single feed ELS2 Normal feed w/ EM separate neutral GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

2 (5.1)

2-1/4 (5.7)

7-1/2 (19.1)

7 (17.8)

LFDW Lightfin

LDDW Lightduct

1 2 3 4

PSG10

www.peerless-lighting.com | 510-845-2760

Not available in 347V. Available only with 54T5HO lamp type. Not available with R2 or R3. T5 only.

PEERLESS

Notes

183

PENDANT

Envision

PRODUCT INFORMATION

ENVISION

Construction Materials: Extruded aluminum housing. Die-cast end cap. Finish: Satin anodized or white polyester powder paint standard. End caps painted to match (C110 aluminum paint with satin anodized finish). Custom colors available. Fixture length: 4'-1/4", 8' and 12' individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 9/16" for each end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12'

sections can be joined to form longer-length fixtures.

opal diffuser lamp shield with T5 or T5HO.

Optics Shielding: Die-punched pattern (holes, slots or windows) ENM2 and ENM3. Prismatic acrylic lens with the windows option. The difference between ENM2 and ENM3 is the position of the lamps. ENM2 indirect/open has a lower direct component than ENM3 indirect/Lightvent™. Parabolic, semi-specular or white painted aluminum louvers on ENM4 and VisorOpticTM

Reflectors: Die-formed, pre-painted white steel; hammertone specular aluminum and specular aluminum.

Example: ENM1 1 32 40FT R12 120 GEB 2SE EL SCT LP730 C100 F1/24

ORDERING INFORMATION Number of lamps

Series ENM1 Indirect ENM2 Indirect/open ENM3 Indiect/ Lightvent™ ENM4 Indirect/direct

Emergency (blank) None EL Emergency battery pack EC Emergency circuit EN Emergency battery pack with night-light circuit

Lamp type

Shielding

1 2 3

32 32W T8 54T5HO 54W T5HO2 28T5 28W T52

HOL Holes SSB Semispecular WIN Windows baffle SLT Slots WPB White painted baffle

Switching

Lamp color

SCT Single L/LP circuit LP730 DCT Dual circuit PL735 LP741 LP830 PL835 LP841

ADDITIONAL INFORMATION

No lamp 3000K 70+ CRI9 3500K 70+ CRI9 4100K 70+ CRI9 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

Baffle

Nominal row length5

LP830P 3000K 80+ CRI premier lamp10 LP835P 3500K 80+ CRI premier lamp10 LP841P 4100K 80+ CRI premier lamp10 Reference Lamp Chart on website or consult factory for other options.

_FT

Maximum section length

Voltage Ballast

R4 4' R8 8' R12 12'

120 277 347

GEB

<20% THD electronic ballast (T8 only) GEB10 <10% THD ballast S5 SIMPLY5™ 6,8 ADEZ Advance® Mark 10® dimming6,7 ADZT Advance® Mark 7® (0-10V) dimming6,7 ECO10 LUTRON® ECO-10 dimming6 OSDIM OSRAM® 0-10V dimming6,7,8 TUDA ULT (0-10V) dimming6,11 Reference Ballast Chart on website or consult factory for other options.

Finish

Options

Mounting/Overall suspension

C100 Satin anodized finish C200 Peerless white (low gloss) C005 Soft white (low gloss) C032 White white (gloss) C041 White white (low gloss) C099 Custom color (consult factory) C110 Painted silver to match anodized aluminum

DU ELH ELS GLR GMF NYC

Damp location label Dust cover EM through-wire w/ separate feed EM through-wire w/ single feed Fusing (fast blow) Fusing (slow blow) New York City code

PEERLESS

3 (7.6)

184

ENM1 Indirect

Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Mounting/ accessories ACG Adjustable cable grippers CP Chicago plenum MCS Matching feed canopy at support OJB Offset J-box at feed location

For additional product information, visit www.peerless-lighting.com. Notes

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

8 (20.3)

Number of emergency modules

3 (7.6)

3 (7.6) 8 (20.3) ENM2 Indirect/Open

8 (20.3) ENM3 Indirect/Lightvent

2-9/16 (6.5) 8 (20.3) ENM4 Indirect/Direct

1 2 3 4 5 6 7 8 9 10 11

Not available with ENM3. Only available with 1- or 2-lamp ENM4. ENM2 and ENM3 only. ENM4 only. Must be in 4' increments. Not available in 347V. Not available with 28T5 lamp type. Not available with 32 T8 lamp type. T8 only. T5 only. Not available with 54T5HO lamp type.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded aluminum housing. Die-cast aluminum end cap.

® ENVISION Wall

Optics Reflector: Die-formed prepainted white steel and hammertone specular aluminum.

WALL

Envision

PRODUCT INFORMATION

Finish: Satin anodized or white polyester powder paint standard. End caps painted to match (C110 aluminum paint with satin anodized finish). Custom colors available. Fixture length: 2', 3', 4', 8' and 12' individual fixture sections. Add 1/4" for each end cap to determine total Fixture length. Using internal joiners, 2', 3', 4', 8' and 12' sections can be joined to form longer-length fixtures.

Example: EN1W 020006 T8 24FT R12 120 GEB10 SCT L/LP C100

ORDERING INFORMATION

Number of emergency modules

Series Shielding

Lamp type

Nominal row length

Maximum section length Voltage

Ballast

EN1W

__FT

R2 R3 R4 R8 R12

GEB <20% THD electronic GEB10 <10% THD electronic ADEZ Advance® Mark 10® dimming1 ADZT Advance® Mark 7® (0-10V) dimming1 ECO10 LUTRON® ECO-10 dimming1 Reference Ballast Chart on website or consult factory for other options.

Switching

Lamp color

Finish

SCT Single circuit DCT Dual circuit

L/LP No lamp LP730 3000K 70+ CRI LP735 3500K 70+ CRI LP741 4100K 70+ CRI LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI Reference Lamp Chart on website or consult factory for other options.

C100 C110

010005 1 lamp 020006 2 lamp

Emergency (blank) None EL Emergency battery pack2 EC Emergency circuit EN Emergency pack with night-light circuit2

ADDITIONAL INFORMATION

2' 3' 4' 8' 12'

120 277 347

C200 C005 C032 C041 C099

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Options Satin anodized aluminum Painted silver to match anodized aluminum finish Peerless white (low gloss) Soft white (low gloss) White white (gloss) White white (low gloss) Custom color (consult factory)

CFG DL DU ELH ELS ELS2 GLR GMF NYC

Configuration (contact factory) Damp location label Dust cover EM through-wire with separate feed EM through-wire with single feed Normal feed w/ EM separate neutral (fast blow) Fusing (fast blow) Fusing (slow blow) New York City code

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

3 (7.6) 9 (22.9)

1 Not available in 347V. 2 Not available with R2 or R3.

PSG10

www.peerless-lighting.com | 510-845-2760

PEERLESS

Notes

185

PENDANT

Classic Round

PRODUCT INFORMATION Construction Materials: One- or two- piece extruded aluminum housing. Die-cast aluminum end cap.

CLASSIC ROUND LD6

for longer-length fixtures with joined 4', 8' and 12' sections.

Finish: Satin anodized or white polyester powder paint standard. End caps painted to match (C110 aluminum paint with satin anodized finish). Custom color available. Fixture length: 4', 8' and 12' nominal fixture sections. Request submittal drawings

Optics Shielding: Select up and down shielding of solid, acrylic prismatic lens, white painted baffle or open (up only). Select aperture openings of 60°, 90° or 120°. Reflectors: Die-formed, prepainted white steel.

Example: LD6 010000 T8 24FT R12 120 GEB SCT LP730 C100 F1/24

ORDERING INFORMATION

T82

__FT

Maximum section length

Voltage Ballast

R4 4' R8 8' R12 12'

120 277 347

Shielding

LD6 Suspended LD6W Wall

1 lamp up 010000 Open 010100 Baffle 010200 Lens 310202 Lens 310652 Open/lens 2 lamps up 020004 Open 020102 Baffle 020202 Lens

1 lamp down 101100 Baffle 101200 Lens 101201 Lens 101202 Lens 201103 Baffle/baffle 201203 Lens/lens 201503 Open/baffle 201653 Open/lens 201753 Lens/baffle 401204 Lens/lens 401654 Open/lens

Emergency

Switching

Lamp color

Finish

Options

Mounting/Overall suspension4

(blank) None EL Emergency battery pack EC Emergency circuit EN Emergency battery pack with night-light circuit

SCT Single circuit DCT Double circuit

C041 White white (low gloss), standard C100 Satin anodized finish C110 Painted silver to match anodized aluminum finish C200 Peerless white (low gloss) C005 Soft white (low gloss) C032 White white (gloss) CO99 Custom color (consult factory)

CFG DL

Mounting F1/ T-bar ceiling (universal mounting bracket) F1A/ T-bar ceiling (UMB with integrated J-box) F2/ Hard ceiling (horizontal J-box) F3/ Rigid stem F4A/ Grid ceiling IDS 15⁄16" F4B/ Grid ceiling IDS 9⁄16" F4C/ Grid ceiling IDS screw slot

(blank) 1SE 2SE XSE

None 1 section 2 sections X sections

ADDITIONAL INFORMATION

2 lamps down 102102 Baffle 102203 Lens 1 lamp up, 1 lamp down 211104 Baffle/baffle 211204 Lens/lens 211504 Open/baffle 211654 Open/lens 211754 Lens/baffle 311204 Lens/lens 311654 Open/lens

411206 Lens/lens 411656 Open/ lens 2 lamps up, 1 lamp down 321203 Lens/lens 321653 Open/ lens 1 lamp up, 2 lamps down 412205 Lens/lens 412655 Open/ lens

Configuration Damp location label ELH EM throughwire harness ELS EM throughwire harness with single feed ELS2 Normal feed w/ EM separate neutral (dualfeed cord) GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code

GEB

<20% THD electronic ballast GEB10 <10% THD electronic ballast ADEZ Advance® Mark 10® dimming3 ADZT Advance® Mark 7® 0-10V dimming3 ECO10 LUTRON® ECO-10 dimming3 Reference Ballast Chart on website or consult factory for other options.

Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

Mounting accessories CP

Chicago plenum (F1A mounting only) MCS Matching feed canopy at support OJB Offset J-box at feed location

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

60°

Sample: LD6 4 1 2 2 0 5 Aperture (Up/Down)

PEERLESS

Nominal row length

Series

Number of emergency modules

186

Lamp type

120°

6 (15.2) LD6W with Wall Mounting Bracket

0 1 2 3 4

120 /0 0/120o 90o/90o 120o/60o 60o/120o

# of # of Lamps Up Lamps Down

Shielding (Up/Down)

000-099 100-174 200-449 500-599 650-749 750-849

Open/solid Baffle/solid Lens/solid Open/baffle Open/lens Lens/baffle

Notes 1 See shielding decoder below. 2 T5, T5HO available with some shielding options. Consult factory for more information. 3 Not available in 347V. 4 Not required with LD6W.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: One- or two- piece extruded aluminum housing. Die-cast aluminum end cap.

for longer-length fixtures with joined 4', 8' and 12' sections.

CLASSIC ROUND LD9

Optics Shielding: Select up and down shielding of solid, acrylic prismatic lens, white painted baffle or open (up only). Select aperture openings of 90° or 120°.

Finish: Satin anodized or white polyester powder paint standard. End caps painted to match (C110 aluminum paint with satin anodized finish). Custom color available.

PENDANT

Classic Round

PRODUCT INFORMATION

LD9 Solid/Baffle Direct

Reflectors: Die-formed prepainted white steel.

Fixture length: 4', 8' and 12' nominal fixture sections. Request submittal drawings

LD9 Solid/Lens Direct

Example: LD9 211650 T8 36FT R12 277 GEB10 EL SCT L/LP C100 GMF F1/24

ORDERING INFORMATION

Series

Shielding

LD9 Suspended LD9W Wall

1 lamp up 010000 Open 010100 Baffle 010200 Lens 2 lamps up 020001 Open 020102 Baffle 020202 Lens

Number of emergency modules (blank) 1SE 2SE XSE

Emergency

None 1 section 2 sections X sections

3 lamps up 030004 Open 030104 Baffle 030203 Lens 1 lamp down 101100 Baffle 101200 Lens 103103 Baffle 103202 Lens

Switching

(blank) None SCT Single circuit EL Emergency battery DCT Double pack circuit EC Emergency circuit EN Emergency battery pack with night-light circuit

ADDITIONAL INFORMATION

2 lamps down 102102 Baffle 102201 Lens 1 lamp up, 1 lamp down 211200 Lens/lens 211650 Open/ lens 2 lamps up, 2 lamps down 222100 Baffle/ baffle 222201 Lens/lens

222500 Open/ baffle 222651 Open/lens 222750 Lens/ baffle 2 lamps up, 3 lamps down 223101 Baffle/ baffle 223202 Lens/lens 223501 Open/ baffle 223652 Open/lens

3 lamps up, 2 lamps down 232102 Baffle/baffle 232203 Lens/lens 232502 Open/baffle 232653 Open/lens 232751 Lens/baffle 3 lamps up, 3 lamps down 233103 Baffle/baffle 233204 Lens/lens 233503 Open/baffle 233654 Open/lens 233752 Lens/baffle

Nominal Maximum row section length length Voltage Ballast

T82

__FT

R4 4' R8 8' R12 12'

120 277 347

Lamp color

Finish

Options

Mounting/Overall suspension4

C041 White white (low gloss) C100 Satin anodized finish C110 Painted silver to match anodized aluminum finish C200 Peerless white (low gloss) C005 Soft white (low gloss) C032 White white (gloss) C099 Custom color (consult factory)

CFG DL ELH

Mounting F1/ T-bar ceiling (universal mounting bracket) F1A/ T-bar ceiling (UMB with integrated J-box) F2/ Hard ceiling (horizontal J-box) F3/ Stem mount F4A/ Grid ceiling IDS 15⁄16" F4B/ Grid ceiling IDS 9⁄16" F4C Grid ceiling IDS screw slot

Configuration Damp location label EM through-wire harness ELS EM through-wire harness with single feed ELS2 Normal feed w/ EM separate neutral (dual-feed cord) GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code

GEB

Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

Mounting accessories CP

Chicago plenum (F1A mounting only) MCS Matching feed canopy at support OJB Offset J-box at feed location

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

90°

Sample: LD9 2 3 3 7 5 2 Aperture (Up/Down)

9 (22.9) LD9

www.peerless-lighting.com | 510-845-2760

0 1 2 3 4

120 /0 0/120o 90o/90o 120o/60o 60o/120o

# of # of Lamps Up Lamps Down

Shielding (Up/Down)

000-099 100-174 200-449 500-599 650-749 750-849

Open/solid Baffle/solid Lens/solid Open/baffle Open/lens Lens/baffle

Notes 1 See shielding decoder below. 2 T5, T5HO available with some shielding options. Consult factory for more information. 3 Not available in 347V. 4 Not required with LD9W.

PEERLESS

90°

PSG10

Lamp type

187

COVE

Peerless Cove

PRODUCT INFORMATION

PEERLESS COVE

Construction Materials: Die-formed, cold-rolled steel housing and end plate.

lens. Material composition varies with lamping and fixture style.

Finish: Pre-painted white. Fixture length: 2', 3', 4' and 8' sections. Install sections endto-end to fit cove length. Optics Reflectors: Die-formed, pre-painted white steel; hammertone specular aluminum; specular aluminum and micro-prismatic acrylic

Example: HCM5 1 54T5HO U8 277 GEB10 SCT LP835

ORDERING INFORMATION Series

Number of lamps

HCM5 1 7ECXM5 21 9ECXM5

Switching SCT Single circuit DCT Dual circuit

Lamp type 54T5HO 39T5HO 24T5HO 28T5 21T5 14T5 32 25 17

4' 54W T5HO 3' 39W T5HO 2' 24W T5HO 4' 28W T5 3' 21W T5 2' 14W T5 4' 32WT81 3' 25WT81 2' 17WT81

Nominal row length

Voltage

U2 U3 U4 U8

120 277 347 MVOLT

2' 3' 4' 8'

120V 277V 347V 120/277V

Ballast2

Emergency

GEB <20% THD electronic ballast (T8 only) GEB10 <10% THD electronic ballast ADEZ Advance® Mark 10® dimming2,3 ADZT Advance® Mark 7® (0-10V)2,3 ECO10 LUTRON® ECO-10 dimming2 OSDIM OSRAM® 1-10V dimming2,4 Reference Ballast Chart on website or consult factory for other options.

(blank) EL EC EN

Lamp color L/LP LP730 LP735 LP741 LP830 LP835 LP841

ADDITIONAL INFORMATION

None Emergency battery pack5 Emergency circuit Emergency battery pack with night-light circuit5

Options 7

No lamp 3000K 70+ CRI6 3500K 70+ CRI6 4100K 70+ CRI6 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI

LP830P 3000K 80+ CRI premier lamp LP835P 3500K 80+ CRI premier lamp7 LP841P 4100K 80+ CRI premier lamp7 Reference Lamp Chart on website or consult factory for other options.

DL DU GLR GMF NYC

Damp location label Dust cover Fusing (fast blow) Fusing (slow blow) New York City code

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 1-7/8 (4.8) 6 (15.2) HCM5

2-3/4 (7.0)

3-3/4 (9.5) 7-1/4 (18.4)

8-3/4 (22.2) 9ECXM5

7ECXM5

PEERLESS

Notes

188

1 2 3 4 5 6 7

7ECXM5 and 9ECXM5 only. Not available in 347V. 32T8 and 54T5HO only. 54T5HO only. Not available with U2 or U3. T8 only. T5 only.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded aluminum housing. Die-cast aluminum end cap. Finish: Satin anodized standard, custom colors available. Black perforated side strips.

MIRAGE®

Optics Shielding: Parabolic satin aluminum louvers with luminous edges. VisorOptic™ opal diffuser with T5HO lamping.

PENDANT

Mirage

PRODUCT INFORMATION

Reflectors: Die-formed hammertone specular aluminum.

Fixture length: 4'-1/4", 8' and 12' individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 4-1/4" for each end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longer-length fixtures.

Example: MRM4 1 54T5HO 40FT R12 120 GEB10 2SE EL SCT LP835 C100 F1/24

ORDERING INFORMATION Series MRM4

Number of lamps 1 2

Lamp type 54T5HO 54W T5HO 28T5 28W T5 32 32W T8

Switching

Nominal row length1

Maximum section length

Voltage

Ballast

_FT

R4 4' R8 8' R12 12'

120 277 347

GEB10 <10% THD ballast S5 SIMPLY5™ 2,4 ADEZ Advance® Mark 10® dimming2,3 ADZT Advance® Mark 7® 0-10V dimming2,3 ECO10 LUTRON® ECO-10 dimming2 OSDIM OSRAM® 0-10V dimming2,3,4 TUDA ULT 0-10V dimming2,7 Reference Ballast Chart on website or consult factory for other options.

Lamp color

SCT Single circuit DCT Dual circuit

L/LP No lamp LP730 3000K 70+ CRI5 LP735 3500K 70+ CRI5 LP741 4100K 70+ CRI5 LP830 3000K 80+ CRI LP835 3500K 80+ CRI LP841 4100K 80+ CRI

ADDITIONAL INFORMATION

LP830P

3000K 80+ CRI premier lamp6 LP835P 3500K 80+ CRI premier lamp6 LP841P 4100K 80+ CRI premier lamp6 Reference Lamp Chart on website or consult factory for other options.

Number of emergency sections (blank) 1SE 2SE XSE

Emergency

None 1 section 2 sections X sections

(blank) None EL Emergency battery pack EC Emergency circuit EN Emergency battery pack with nightlight circuit

Finish

Options

Mounting/Overall suspension

Mounting accessories

C100 Satin anodized finish C110 Painted silver to match anodized aluminum C200 Peerless standard white (low gloss) C005 Soft white (low gloss) C032 White white (gloss) C041 White white (low gloss) C099 Custom color (consult factory)

DL Damp location label ELH EM through-wire w/ separate feed ELS EM through-wire w/ single feed ELS2 Normal feed w/ EM separate neutral (dual-feed cord) GLR Fusing (fast blow) GMF Fusing (slow blow)

Mounting F1/ T-bar ceiling F1A/ T-bar ceiling (UMB with integrated J-box) F2/ Hard ceiling (horizontal J-box) F4A/ IDS clip 15/16" tee F4B/ IDS clip 9/16" tee F4C/ IDS clip screw slot

ACG Adjustable cable grippers CP Chicago plenum MCS Matching feed canopy at support OJB Offset J-box at feed location

Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-3/4 (7.0)

2-3/4 (7.0) 9-7/8 (25.1)

9-7/8 (25.1) MRM4 with VisorOpticTM

Notes

PSG10

www.peerless-lighting.com | 510-845-2760

Must be in 4' increments. Not available in 347V. Not available with 28T5. Not available with 32T8. T8 only. T5 only. Not available with 54T5HO.

PEERLESS

1 2 3 4 5 6 7

189

PENDANT

Aero/Enzo

PRODUCT INFORMATION

AERO® ENZO

Construction Materials: Die-formed cold-rolled steel housing. Flat steel end plate.

Optics Reflectors: Die-formed, pre-painted white steel or specular aluminum.

Finish: Fine-textured white polyester powder paint standard; custom colors available.

Shielding: Partially perforated windows on AEM2 and EZM2. Continuous perforated window with option CWIN on AEM2 and EZM2.

Fixture length: 4', 8' and 12' individual fixture sections for nominal suspension spacing of 4', 8' and 12'. Add 1/16" for each standard end cap to determine total Fixture length. Using internal joiners, 4', 8' and 12' sections can be joined to form longer-length fixtures.

Example: AEM1 1 54T5HO WHR 40FT R12 277 GEB10 2SE EL SCT LP841 C518 GLR F1/24

ORDERING INFORMATION

Lamp type

Reflector

Shielding1

1 2

54T5HO 28T5

WHR White reflector SPR Specular reflector

(blank) None CWIN Continuous perforated window

Emergency

Switching

Lamp color

Finish

Options

Mounting/Overall suspension

Mounting accessories

(blank) None EL Emergency battery pack EC Emergency/ night-light circuit EN Emergency battery pack with night-light circuit

SCT Single circuit DCT Dual circuit

L/LP LP830 LP835 LP841 LP830P

C110 Painted silver to match anodized aluminum finish C518 Textured white white (low gloss) C099 Custom color (consult factory)

ACG Adjustable cable grippers CP Chicago plenum MCS Matching feed canopy at support OJB Off set J-box at feed location

Series AEM1 AEM2 EZM1 EZM2

Aero indirect Aero indirect/direct Enzo indirect Enzo indirect/direct

Number of emergency modules5 (blank) 1SE 2SE XSE

None 1 section 2 sections X sections

Maximum Nominal row section length2 length

Number of lamps

ADDITIONAL INFORMATION

No lamp 3000K 80+ CRI 3500K 80+ CRI 4100K 80+ CRI 3000K 80+ CRI premier lamp5 LP835P 3500K 80+ CRI premier lamp5 LP841P 4100K 80+ CRI premier lamp5 Reference Lamp Chart on website or consult factory for other options.

_FT

R4 4' R8 8' R12 12'

Damp location label DU Dust cover ELH EM through-wire w/ separate feed ELS EM through-wire w/ single feed ELS2 Normal feed w/ EM separate neutral (dual-feed cord) GLR Fusing (fast blow) GMF Fusing (slow blow) NYC New York City code

Voltage

Ballast

120 277 347

GEB10 <10% THD electronic ballast ADEZ Advance® Mark 10® dimming3,4 ECO10 LUTRON® ECO-10 dimming3 OSDIM OSRAM® 0-10V dimming3,4 Reference Ballast Chart on website or consult factory for other options.

Overall suspension 12 12" 15 15" 18 18" 21 21" 24 24" XX XX"

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-3/16 (5.6)

PEERLESS

2-3/16 (5.6)

190

6-1/2 (16.5)

AEM Aero

EZM Enzo

Notes 1 2 3 4 5

EZM2 and AEM2 only. Must be in 4' increments. Not available in 347V. Not available with 28T5 lamp type. T5 only.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded and mitered aluminum housing and end cap.

Opal acrylic diffuser overlay above louvers optional.

PLANAR

Reflectors: Die-formed diffuse aluminum.

PENDANT

Planar

PRODUCT INFORMATION

Finish: Matte white standard; custom colors available. Fixture length: 4' and 8' individual fixture sections. Request submittal drawings for longer-length fixtures with joined 4' and 8' sections. Optics Shielding: Parabolic semispecular aluminum louvers or soft white acrylic diffuser.

Example: PLA IND 4FT 2 T5 CG EB 120 SW WE

ORDERING INFORMATION Series

Run information

Length2

Number of lamps

Lamp type3

Mounting

PLA Planar

IND BOR INT EOR

10FT 8FT 6FT 4FT 3FT 2FT

1 2

T5 T5HO

CG Cable and gripper 15' SY Split "Y"

Individual Beginning of row1 Intermediate1 End of row1

Ballast4 EB Electronic EDB Electronic dimming (micro-case only, limited to 1.18" wide x 1.00" high) ADDITIONAL INFORMATION

Nominal 120" Nominal 96" Nominal 72" Nominal 48" Nominal 36" Nominal 24"

Voltage

Shielding

Finish5

Options

120 277

PB SW PBO

EMPK Emergency battery pack (limited to 1.18" wide x 1.00" high)

Parabolic diffuse aluminum baffle Soft white acrylic Parabolic diffuse aluminum baffle with white acrylic overlay

Matte white

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 1-3/4 (4.4)

1-3/4 (4.4) 6 (15.2)

6 (15.2)

PLA with PB Parabolic Baffle

PLA with SW Soft White Acrylic

1 2 3 4 5

PSG10

www.peerless-lighting.com | 510-845-2760

Consult factory for continuous run. Consult factory for continuous rows. Lamp provided by others. Consult factory for specific ballast options. Custom colors available; consult factory.

PEERLESS

Notes

191

Procyon

PENDANT

PRODUCT INFORMATION Construction Materials: Die-formed, coldrolled steel housing. Die-cast aluminum end cap.

PROCYON

Reflector: Die-formed semispecular aluminum.

Finish: Matte white standard; custom colors available. Fixture length: 4' and 8' individual fixture sections. Request submittal drawings for longer-length fixtures with joined 4' and 8' sections. Optics Shielding: Perforated side panels with soft white acrylic overlay on PR1 and PRW.

Example: PR1 IND 4FT 2 54T5HO CG EB 120 WE 2EC

ORDERING INFORMATION Series

Run information

PR1 Perforated steel PR2 Solid PRW Perforated steel wall

IND INT BOR EOR

Length

Individual Intermediate1 Beginning of row1 End of row1

Finish6

Voltage 120 277

Nominal Nominal

Endcap5,7

WE Matte white

ADDITIONAL INFORMATION

4 FT 8 FT

Number of lamps 1 2 33

Lamp type

54T5HO 54W T5HO 28T5 28W T5

Mounting5

Ballast

CG 15' cable and gripper

EB Electronic

Options

_EC

EMPK Emergency battery pack (small case only)

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2-1/8 (5.4)

2-1/8 (5.4) 9-3/4 (24.8)

6-3/8 (16.2)

PR1 Perforated Steel/PR2 Solid

PRW Perforated Steel Wall

PEERLESS

Notes

192

1 2 3 4 5 6 7

Consult factory for continuous runs. Not available with PR1. Not available with PRW. Lamps provided by others. Not required on PRW. Custom colors available; consult factory. Specify quantity (2 required per run).

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded aluminum housing. Die-cast aluminum end cap (halfround or square).

clear linear-ribbed lens, soft white acrylic panel or concave perforated steel panel.

FOCUS 58

PENDANT

Focus 58

PRODUCT INFORMATION

Reflectors: Die-formed, prepainted white steel.

Example: FS IND 8FT 2 32T8 CG EB 120 SW WE 2HR

ORDERING INFORMATION Series

Run information

FS Pendant FSW Wall

IND BOR INT EOR

Length

Individual Beginning of row1 Intermediate1 End of row1

Shielding CP PLSS LR SW

Concave perforated panel Parabolic diffuse aluminum baffle Clear linear-ribbed lens Soft white acrylic panel

ADDITIONAL INFORMATION

4FT Nominal 8FT Nominal

Number of lamps 2

1 23

Lamp type4

Mounting5

Ballast

Voltage

32T8 32W T8 28T5 28W T5 54T5HO 54W T5HO

CG 15' cable and gripper S18 18" stem S24 24" stem

EB Electronic

120 277

Finish6

Endcap7

Options

WE Matte white

_HR Half round _SQ Square

EMPK Emergency battery pack

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 2 (5.1)

2 (5.1)

6-1/2 (16.5)

3-3/4 (9.5)

FS Pendant

FSW Wall

Notes

PSG10

www.peerless-lighting.com | 510-845-2760

Consult factory for continuous runs. 1 lamp available only with FSW. 2 lamps available only with FS. Lamps provided by others. Not required on FSW. Custom color available; consult factory. Specify quantity (2 required per run).

PEERLESS

1 2 3 4 5 6 7

193

PENDANT

Quicksilver

PRODUCT INFORMATION

QUICKSILVER

Construction Materials: Extruded aluminum housing. Flat aluminum end plate.

Optics Shielding: Specular aluminum louvers. Parabolic side-rails slotted to provide uplight.

Finish: Natural anodized standard; custom colors available.

Reflectors: Die-formed specular aluminum.

Fixture length: 4' and 8' individual fixture sections. Request submittal drawings for longer-length fixtures with joined 4' and 8' sections.

Example: QSI P 4FT 2 28T5 CG ET5 120 NA

ORDERING INFORMATION Series

Mounting method

Length

QSI

P Pendant

4FT Nominal 1 8FT Nominal 2

ADDITIONAL INFORMATION

Number of lamps

Lamp type1

Mounting

28T5 28W T5 CG Cable and gripper 54T5HO 54W T5HO 2 32T8 32W T8

Ballast

Voltage

Finish3

ET5 Electronic T5 EDT5 Electronic dimming T5 ET8 Electronic T8 EDT8 Electronic dimming T8

120 277

NA Natural anodized aluminum

Options EMPK Emergency battery pack

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted. 1-3/8 (3.5) 4-3/8 (11.1)

PEERLESS

6 (15.2)

194

Notes 1 Lamps provided by others. 2 Available with 2 lamps only. 3 Custom colors available; consult factory.

510-845-2760 | www.peerless-lighting.com

PSG10

Construction Materials: Extruded aluminum, smooth or fluted spine. Flat steel end plate with WSFS and WSFF. Flat steel end plate and white acrylic halo on WSS and WSF.

Optics Shielding: Soft white acrylic or perforated steel wings.

WINGSPAN

PENDANT

Wingspan

PRODUCT INFORMATION

Reflectors: Die-formed, pre-painted white steel and semi-specular aluminum.

Finish: Matte white standard; custom colors available. Fixture length: 4' and 8' individual fixture sections. Request submittal drawings for longer-length fixtures with joined 4' and 8' sections.

WSS

WSFF

Example: WSS P IND 8FT 2 54T5HO CG EB 120 SW WE

ORDERING INFORMATION Series WSS WSF WSFS WSFF

Mounting method Wingspan (halo ends / smooth spine) Wingspan (halo ends / fluted spine) Wingspan (full ends / smooth spine) Wingspan (full ends / fluted spine)

Ballast EB Electronic EDB Electronic dimming ADDITIONAL INFORMATION

Run information Individual Beginning of row1 Intermediate1 End of row1

Length

Lamp type3

Mounting4

1 2 3

28T5 28W T5 54T5HO 54W T5HO

CG Cable and gripper SY Split "Y" cabling

Number of lamps 2

P Pendant (cable) W Wall

IND BOR INT EOR

4FT 8FT

Voltage

Shielding

Finish5

Options

120 277

SW Soft white acrylic PF Perforated steel

WE Matte white

EMPK Emergency battery pack

For additional product information, visit www.peerless-lighting.com.

Drawings are for dimensional detail only and may not represent actual mechanical configuration. Dimensions are shown in inches (centimeters) unless otherwise noted.

3-3/8 (8.6)

3 (7.6)

10-7/8 (27.6)

WSS & WSF

WSFS & WSFF

3 (7.6) 6-1/4 (15.9) WSS, WSF, WSFS & WSFF Wall

1 2 3 4 5

PSG10

www.peerless-lighting.com | 510-845-2760

Consult factory for continuous runs. 1 lamp is available for wall-mounted only. Consult factory for specific ballast options. Omit for wall-mounted. Custom colors available; consult factory.

PEERLESS

Notes

195

OPTION GUIDE

PRODUCT INFORMATION

General Options DL

Damp location label. Fixtures will be shipped compliant with UL requirements for damp location fixtures.

Clear plastic dust cover.

ELH

Current load permitting, all emergency lighting modules are powered by through-wires to one emergency power feed location. The emergency lighting power feed is located at the last support in the fixture run. ELH provides separate neutrals for emergency and normal power throughout the fixture. Check local code for compliance. See Emergency Lighting Options and Example Runs for further information.

ELS

Current load permitting, all emergency lighting modules are powered by a continuous through-wire to one emergency power feed location. The emergency lighting power feed is located at the first support point in the fixture run and combined within the normal power feed cord, sharing a common neutral. Check local code for compliance. See Emergency Lighting Options and Example Runs for further information.

ELS2 Current load permitting, all emergency lighting modules are powered by continuous through-wires to one emergency power feed location. Normal and emergency power feed are fed via adjoining, but separate feed cords located at the first support in the fixture run. ELS2 provides separate neutrals for emergency and normal power throughout the fixture. Check local code for compliance. See Emergency Lighting Options and Example Runs for further information. Vertical Junction Box

Vertical Junction Box

Horizontal Junction Box Ceiling

Ceiling

Emergency Power Cord

Normal Power Cord

F1 - TYPICAL

Emergency Power Cord

F2 - TYPICAL

FEP

Flat end plates. When sculptured end plates are standard, product will be shipped with flat end plates instead. Applies to LF2FW and LF3FW only.

GLR

Fusing (fast blow). Electronic ballasts contain inherent electrical protection. Select GLR if code or regulation requires externally fused ballasts.

GMF Fusing (slow blow). Electronic ballasts contain inherent electrical protection. Select GMF if code or regulation requires externally fused ballasts. NYC

New York City code. Fixtures will be shipped compliant with New York City code requirements.

OTM On tenon mount. This is an option for use with our tenon and corner assemblies. When OTM is specified, the support or power feed/support is connected directly to the tenon or corner assembly. This reduces the number of support locations with configurations. SCEP Sculptured end cap. Please see product spec sheets for availability.

Mounting Options ACG

Adjustable cable gripper. Allows you to shorten overall suspension to obtain custom lengths. (See below.)

APF

Alternate power feed. Provides an additional 72” of power cord above the standard cord length specified. Example: If F1/24 APF is specified, Peerless will ship 24” hanging hardware, but the power feed cable will be an additional 72” in length.

Chicago plenum. Fixtures will be shipped compliant with Chicago plenum code requirements.

MCS Match canopy at support. Increases the canopy diameter on support locations to match the default power feed canopy diameter. For F1 it is 3-1/2” in diameter and for F2 it is 5” in diameter. OJB

Offset J-box (adjacent to support location). Provides a support connection kit and a separate power feed kit with two additional feet of power cable to accommodate an offset J-box. (See below.) 4" Octagonal J-box — by others 18" Overall Suspension with ACG Option

Ceiling 18" Fixed Overall Suspension

1/4 -20 Mounting rod — by others

Ceiling

Support Power cord

PEERLESS

18" or less

18" +/- 1/4 "

196

510-845-2760 | www.peerless-lighting.com

PSG10

Switching Options SCT DCT

Key Power Feed and Support Location Support Location Emergency Power Feed and Support Location Power Feed, Emergency Power Feed and Support Location

Single circuit. All lamps are wired to a single circuit. Dual circuit. Two light levels are achieved by switching separate rows of lamps in the same fixture on two independently switched circuits. Dual circuit fixtures share a common neutral.

WIRING GUIDE

PRODUCT INFORMATION

For fixtures or runs with two lamps in the cross section, the standard circuiting is that one side is wired to circuit A and the other side is wired to a circuit B. Two Lamps in Cross Section A

4'-0"

8'-0"

12'-0"

The default for a fixture with three lamps (or more) in the cross section is that the row of lamps on the outside is wired to a switched circuit A and the lamps located in the middle are wired to a switched circuit B. Three Lamps in Cross Section A B A

A B A

8'-0"

4'-0"

ALC

A B A

12'-0"

Alternating lamp circuits. Lamps in the same cross section are wired to one circuit and the next cross section is wired to the second circuit. These two circuits alternate across the fixture row. Alternating lamp circuits share a common neutral. Single Lamp in Cross Section A 4'-0"

B 8'-0"

12'-0"

Emergency Lighting Options Number of Emergency Modules 1SE 1 section. One 4FT module per run will have an emergency lighting option. 2SE 2 sections. Two 4FT modules per run. The standard maximum number of 4FT modules is one per 4-, 8- or 12-foot fixture section. Emergency Type EL Emergency battery pack. In the event of a power failure, the battery pack will supply emergency power. Each battery pack will be connected to one lamp unless otherwise specified. Single Lamp in Cross Section EL 4'-0"

EL 8'-0"

EL 12'-0"

Two Lamps in Cross Section EL 4'-0"

EL 8'-0"

EL 12'-0"

Three Lamps in Cross Section EL

EL 4'-0"

8'-0"

EL 12'-0"

Emergency circuit or night-light circuit. When used as an emergency circuit, separate circuit wiring is provided for an alternate building power source (generator, uninterruptable power supply, etc.). When used as a night-light circuit, separate circuit wiring is provided for an unswitched circuit so that designated lamps will always remain on. Each emergency or night-light circuit will be connected to a single lamp when only one lamp is in the cross section. When two or more lamps are in the cross section, the two outermost lamps will be connected to the circuit. Single Lamp in Cross Section EC 4'-0"

EC 8'-0"

EC 12'-0"

Two Lamps in Cross Section EC

4'-0"

8'-0"

4'-0"

PSG10

EC 8'-0"

www.peerless-lighting.com | 510-845-2760

12'-0"

EC 12'-0"

PEERLESS

Three Lamps in Cross Section EC EC

197

WIRING GUIDE

PRODUCT INFORMATION

Emergency Lighting Options (continued) EN

Key Power Feed and Support Location Support Location Emergency Power Feed and Support Location Power Feed, Emergency Power Feed and Support Location

Emergency battery pack with night-light circuit. Each battery pack will be connected to one lamp unless otherwise specified. Each night-light circuit will be connected to a single lamp when only one lamp is in the cross section or to the two outermost lamps when two or more lamps are in the cross section. Single Lamp in Cross Section EN (EL)

EN (EL)

4'-0"

EN (EL)

8'-0"

12'-0"

Two Lamps in Cross Section EN

EN (EL)

4'-0"

EN (EL)

8'-0"

Three Lamps in Cross Section EN EN (EL)

4'-0"

EN (EL)

12'-0" EN

EN (EL)

8'-0"

EN (EL)

12'-0"

Emergency Wiring Options (No option) Each emergency lighting section is powered at the support point that follows it.

ELS

With Emergency Battery Pack EL

8'-0"

ELS2 Current load permitting, all emergency lighting modules are powered by continuous through wires to one emergency power feed location. Normal and emergency power are fed via adjoining but separate feed cords located at the first support in the fixture run. ELS2 provides separate neutrals for emergency and normal throughout the fixture. Check local code for compliance.

16'-0"

Current load permitting, all emergency lighting modules are powered by through wires to one emergency power feed location. The emergency lighting power feed is located at the last support in the fixture run. ELH provides separate neutrals for emergency and normal power throughout the fixture. Check local code for compliance.

ELS/ELS2 With Emergency Battery Pack

With Emergency Battery Pack EL

8'-0"

16'-0"

Example Runs

Maximum Run Distance Per Power Feed

With Emergency Battery Pack A

A EL

8'-0" 24'-0"

8'-0"

Two Lamps in Cross Section, Single Circuit with Two Emergency Battery Packs A

A 8'-0"

EL 8'-0"

8'-0"

A EL

8'-0"

A EL

8'-0"

24'-0" Three Lamps in Cross Section, Dual Circuit with Two Emergency Battery Packs A A A A B A EL BA BA BA 8'-0" 8'-0"

B A EL

Lamps in Cross Section

ELH

Current load permitting, all emergency lighting modules are powered by continuous through wires to one emergency power feed location. The emergency lighting power feed is located at the first support point in the fixture run and combined within normal power feed cable shring a common neutral. Check local code for compliance.

1 2 3 4 1 2 3 4

Lamp Type T5HO T5HO T5HO T5HO T5 and T8 T5 and T8 T5 and T8 T5 and T8

120V 56' 28' 16' 12' 104' 52' 36' 24'

277V 124' 64' 40' 32' 240' 120' 80' 60'

347V 160' 80' 52' 40' 292' 148' 96' 72'

Assumptions: Single-circuit, no emergency lighting option, T8 .88 BF ballast and T5/T5HO 1.0 BF ballast. Consult factory for other scenarios.

8'-0"

24'-0"

PEERLESS

Three Lamps in Cross Section, Dual Circuit with Two Emergency Battery Packs and ELH Option A A A A B A EL BA BA BA 8'-0" 8'-0" 24'-0"

198

Three Lamps in Cross Section, Dual Circuit with Two Emergency Battery Packs and ELS Option A A A A B A EL BA BA BA 8'-0" 8'-0"

B A EL

8'-0"

B A EL

8'-0"

24'-0"

510-845-2760 | www.peerless-lighting.com

PSG10

F1 for use with most T-bar and screw slot grid ceiling applications. Designed for on-grid and off-grid installations.

MOUNTING HARDWARE GUIDE

PRODUCT INFORMATION F1A for use with most T-bar and screw slot grid ceiling applications. Designed for on-grid and off-grid installations. F1A comes complete with vertical junction box with welded waywire.

F1 AND F1A MOUNTING TYPE On-Grid Mounting FEED

SUPPORT Support to structure _ by others

4" x 1-1/2"deep square junction box at feed — by others

Universal mounting bracket

Crimp-on strain relief Universal mounting bracket

T-bar / grid

F1: Screw-in connector, 1/2" flex adaptor

T-bar / grid Ceiling tile

Ceiling tile

White power cord

3-1/2" canopy Finish: white

J- box & cover by Peerless

Cable retainer Snap-in bushing

2” canopy Finish: white Order option MCS to match 3-1/2” canopy at feed Cable retainer

Aircraft cable Aircraft cable

F1A: Wire way

F1 AND F1A MOUNTING TYPE Off-Grid Mounting FEED

SUPPORT

Universal mounting bracket

Support to structure _ by others

4" x 1-1/2" deep square junction box at feed _ by others

Caddy #512 bar

T-bar / grid 3-1/2” canopy Finish: white

Ceiling tile

Support to structure _ by others Universal mounting bracket Caddy #512 bar _ by others

T-bar / grid

Ceiling tile

Snap-in bushing Cable retainer Cable retainer

White power cord

Aircraft cable

PSG10

www.peerless-lighting.com | 510-845-2760

PEERLESS

Aircraft cable

2” canopy Finish: white Order option MCS to match 3-1/2” canopy at feed

199

MOUNTING HARDWARE GUIDE

PRODUCT INFORMATION

F2 MOUNTING TYPE F2 for use with recessed or surface-mount horizontal J-box applications.

FEED

SUPPORT 1/4 - 20 mounting rod _ by others

4" octagonal J-box at feed — by others

1/4 - 20 mounting rod

Reinforcing strap — by Peerless

3/4”

Mounting strap Mounting screw Crimp-on strain relief Snap-on bushing

5" canopy Finish: white Cable retainer

2” canopy Finish: white Order option MCS to match 5” canopy at feed

Cable retainer

White power cord Aircraft cable Aircraft cable

Feed (surface mount)

*ACG option required

F3 MOUNTING TYPE F3 stem mounting for use with recessed or surface-mount horizontal J-box applications. Check with local jurisdiction regarding rigid stem code requirements.

FEED & SUPPORT 1/4 - 20 mounting rod — by others 4" octagonal J-box at feed — by others

1/4 - 18 Hex nuts Reinforcing strap — by Peerless Tile or hard ceiling Mounting strap

White power cord (power feed locations only)

Mounting screw

5" canopy Finish: white

PEERLESS

1/2" O.D. stem Finish:white

200

Surface mount

510-845-2760 | www.peerless-lighting.com

PSG10

MOUNTING HARDWARE GUIDE

PRODUCT INFORMATION

F4A, F4B, F4C MOUNTING TYPE F4A, B, C for use with most T-bar and screw slot grid ceilings applications. F4A includes IDS 15/16" clip at supports. F4B includes IDS9 9/16" clip at supports. F4C includes type IDS95 screw slot clip at supports.

FEED

SUPPORT

Support to structure — by others

Universal mounting bracket

4" x 1-1/2” deep square junction box at feed — by others

Support to structure — by others

IDS clip

Crimp-on strain relief Grid

Ceiling tile

Screw-in connector, 1/2" flex adaptor— by others

3-1/2" canopy Finish: white

White power cord

Ceiling tile

Cable retainer Snap-on bushing Cable retainer Aircraft cable

Grid

2” canopy Finish: white Order option MCS to match 3-1/2” canopy at feed Aircraft cable

PEERLESS

PSG10

www.peerless-lighting.com | 510-845-2760

201