High Speed Fuses For the Protection of Power Semiconductors
February 1998
Bussmann®
British Style BS 88 Introduction
Table of Contents Fuse Style
Ampere Range
Page
240V 690V
6-900A 6-700A
68-69 70-71
Accessories Indicator System & Fuse Bases
72
Curves Time-Current & Peak Let-Through
73-77
General Information Designed and tested to: • BS 88: Part 4 • IEC 269: Part 4 • U.L. Recognized Bussmann offers the industry’s widest range of British style semiconductor fuses and accessories. Bussmann British style products use innovative arc quenching techniques and high grade materials to provide:
British style fuses are typically found in equipment manufactured in the United Kingdom or British Commonwealth countries. However, North American manufacturers have begun to specify British style fuses — particularly in UPS applications at 240 volts or less — to take advantage of their size, performance and cost benefits. Voltage Rating All Bussmann British style fuses are tested to IEC 269: Part 4. This standard requires a test voltage which is 5% higher than the rated voltage. In North America, fuses are required to clear only their rated voltage. Accessories Trip-indicator fuses are available for use in parallel with the main fuse. Indicator fuses can be attached to the associated fuselink, or mounted separately in panel-mounted fuseclips. In addition, a push-on adaptor and microswitch attachment are available, to provide remote indication. Fuseblocks are also available for most applications. Voltage 240 150 690 450
AC X — X —
DC — X — X
Ampere Range 6-900 6-900 6-700 6-700
• Minimal energy let-through (I2t) • Excellent DC performance • Good surge withstand profile
For complete specification data, visit our Web site at www.bussmann.com or call Bussmann Information Fax ~ 314.527.1450
67
Bussmann®
British Style BS 88
240V Type
Rated Current RMS-Amps
LCT
LET
LMT
LMMT
䡲 䡲 䡲 䡲 䡲
6-900A
®
Electrical Characteristics I2t (A2S) Clearing Clearing Pre-arc at 120V at 240V
6 10 12 16 20 25 32 35 50 63 80 100 125 160 180 160 200 250 315 355 400 450 400 500 630 710 800 900
2 3.8 7 20 25 18 32 50 100 180 300 600 600 1100 1600 1100 1500 3200 6000 8000 14000 18000 6000 14000 24000 32000 52000 75000
6 12 22 50 80 120 200 320 500 1100 1900 3800 3800 7000 12000 7000 10000 20000 35000 50000 70000 100000 35000 80000 150000 200000 300000 400000
9 22 32 100 160 250 450 600 1400 2200 3800 7500 7500 16000 29000 16000 20000 40000 75000 100000 160000 220000 80000 170000 300000 460000 600000 800000
Ordering Information Watts Loss
Part Number
1.0 2.5 2.5 2.5 4.0 4.0 5.0 5.0 7.0 9.0 10.0 10.0 16.0 20.0 21.0 17.0 28.0 28.0 35.0 35.0 40.0 42.0 60.0 64.0 75.0 77.0 82.0 97.0
6LCT 10LCT 12LCT 16LCT 20LCT 25LET 32LET 35LET 50LET 63LET 80LET 100LET 125LET 160LET 180LET 160LMT 200LMT 250LMT 315LMT 355LMT 400LMT 450LMT 400LMMT 500LMMT 630LMMT 710LMMT 800LMMT 900LMMT
Dimensions
Curves
Carton Qty.
Carton Weight (kg)
Figure Number
See Page or (BIF #)
20
0.110
Fig. 1
page 73 (35785296)
10
0.310
Fig. 2
page 73 (35785293)
1
0.180
Fig. 3
page 74 (35785294)
1
0.370
Fig. 4
page 74 (35785295)
Interrupting rating 200kA RMS Symmetrical. 䡲 150 Vdc rating Watts loss provided at rated current. Note: 7LET, 10LET, 12LET and 16LET are available for replacement purposes on existing equipment. All fuses above have been tested at 318 Vac. See accessories on page 72.
1 kg = 2.2 lbs
Dimensions Fig. 1: LCT
Fig. 2: LET 4
7.1
28 38 47
26.2 41.8 56
5.5
9.7 12.7
6.4 8.4 8.7
1mm = 0.0394∑
17.7 19.1
1∑ = 25.4mm
BIF document: 720004
68
For complete specification data, visit our Web site at www.bussmann.com or call Bussmann Information Fax ~ 314.527.1450
1 lb = 0.45 kg
Bussmann®
British Style BS 88
240V
6-900A
®
Electrical Characteristics Total Clearing I2t The total clearing I2t at rated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing I2t is found by multiplying by correction factor, K, given as a function of applied working voltage, E g , (RMS).
Arc Voltage This curve gives the peak arc voltage, U L , which may appear across the fuse during its operation as a function of the applied working voltage, E g , (RMS) at a power factor of 15%.
Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p , is given as a function of the RMS load current, Ib , in % of the rated current .
1.6
750
1.0 Kp 0.8
K
1.4
UL
0.6 0.5
1)
1.2 500
1.0
0.4 2)
0.8 0.6
1)
2) 50
0.2
250
0.4 0.2
0.3
Eg
Eg
100
150
200
250
100
1) LCT 2) LET, LMT, LMMT
200
Ib
0.1 30 40 50
300
60
70
80 90 100%
1) LCT 2) LET, LMT, LMMT
Dimensions Fig. 3: LMT
Fig. 4: LMMT 25.4
25.4
31
59
84
31 59 84
13.5
13.5 10.3
10.3
41 83 38.1
Indicator (Optional) 1mm = 0.0394∑
38
1∑ = 25.4mm
BIF document: 720004 For complete specification data, visit our Web site at www.bussmann.com or call Bussmann Information Fax ~ 314.527.1450
69
Bussmann®
British Style BS 88
690V Type
CT
ET
FE
EET
FEE
FM
FMM
MT†
MMT†
6-700A
Rated Current RMS-Amps
®
Electrical Characteristics I2t (A2S) Clearing Clearing Pre-arc at 415V at 660V
6 10 12 16 20 25 32 35 40 45 56 63 80 35 40 45 50 63 71 80 90 100 90 110 140 160 100 120 140 160 180 200 180 200 225 250 280 315 350 400 450 500 550 630 700 160 180 200 250 280 315 355 180 200 225 280 315 355 400 450 500 560 630 710
1.8 7 10 16 32 25 32 52 103 103 135 171 360 33 52 76 103 135 210 250 360 470 490 600 1050 1500 400 540 850 1000 1400 1900 1400 2600 3700 5200 7000 10000 15000 10000 15000 20000 30000 45000 60000 2400 3800 6000 11500 16500 19000 22000 1650 2200 3700 6600 8600 13500 21000 30000 42000 60000 68500 78000
8.5 30 40 66 150 150 190 310 600 680 950 1200 2500 130 180 270 380 480 600 900 1300 1800 3000 4000 7000 10000 1600 1900 2500 3700 5300 7100 7500 10500 14500 20500 30500 40000 60000 40000 60000 82000 120000 180000 245000 15000 25000 40000 80000 100000 125000 160000 12000 16000 26000 47000 62000 97000 150000 220000 300000 430000 500000 600000
12 48 65 110 220 250 350 500 900 1100 1500 2000 4000 200 300 450 600 750 950 1500 2100 2800 4500 6500 12000 17000 2400 3100 3800 5700 8400 11400 13500 18500 26500 37500 55000 77000 105000 72500 105000 150000 215000 310000 420000 25000 38000 58000 110000 150000 180000 200000 18000 23000 40000 70000 91000 140000 220000 320000 450000 640000 720000 850000
Ordering Information Watts Loss
2 3 3 7 7 7 11 11 9 11 14 16 18 9 9 11 11 12 17 20 20 23 19 27 35 39 24 32 36 46 46 52 40 40 44 48 48 55 55 85 90 100 100 100 120 26 26 27 32 35 42 51 42 42 42 47 51 54 60 57 64 64 86 105
Part Number
6CT 10CT 12CT 16CT 20CT 25ET 32ET 35ET 40ET 45ET 56ET 63ET 80ET 35FE 40FE 45FE 50FE 63FE 71FE 80FE 90FE 100FE 90EET 110EET 140EET 160EET 100FEE 120FEE 140FEE 160FEE 180FEE 200FEE 180FM 200FM 225FM 250FM 280FM 315FM 350FM 400FMM 450FMM 500FMM 550FMM 630FMM 700FMM 160MT 180MT 200MT 250MT 280MT 315MT 355MT 180MMT 200MMT 225MMT 280MMT 315MMT 355MMT 400MMT 450MMT 500MMT 560MMT 630MMT 710MMT
Dimensions
Curves
Carton Weight (kg)
Figure Number
See Page or (BIF #)
20
0.160
Fig. 1
page 75 (35785312)
10
0.420
Fig. 2
page 75 (35785312)
10
0.420
Fig. 2
page 76 (35785314)
5
0.450
Fig. 3
page 75 (35785313)
5
0.450
Fig. 3
page 77 (35785292)
1
0.240
Fig. 4
page 76 (35785314)
1
0.450
Fig. 5
page 77 (35785292)
1
0.260
Fig. 4
page 75 (35785313)
1
.0470
Fig. 5
page 76 (35785311)
Carton Qty.
䡲 Interrupting rating 200kA RMS Symmetrical. 䡲 450 Vdc rating 䡲 Watts loss provided at rated current. 䡲 Note: FC, 8ET, 12ET, 15ET, 20ET, 65EET and 75EET are available for replacement purposes on existing equipment. 䡲 See accessories on page 72. †350 Vdc (IEC) rating. Consult Bussmann for U.L. Recognition status.
1 kg = 2.2 lbs
BIF document: 720024
70
For complete specification data, visit our Web site at www.bussmann.com or call Bussmann Information Fax ~ 314.527.1450
1 lb = 0.45 kg
Bussmann®
British Style BS 88
690V
6-700A
®
Electrical Characteristics Total Clearing I2t The total clearing I2t at rated voltage and at power factor of 15% are given in the electrical characteristics. For other voltages, the clearing I2t is found by multiplying by correction factor, K, given as a function of applied working voltage, E g , (RMS). 1.6
Arc Voltage This curve gives the peak arc voltage, U L , which may appear across the fuse during its operation as a function of the applied working voltage, E g , (RMS) at a power factor of 15%.
K
1500
1.4
Power Losses Watts loss at rated current is given in the electrical characteristics. The curve allows the calculation of the power losses at load currents lower than the rated current. The correction factor, K p , is given as a function of the RMS load current, Ib , in % of the rated current . 1.0 Kp 0.8
UL
0.6 0.5
1)
1.2 1.0
0.4
1000 2)
0.8
0.3
0.6
0.2
500 0.4
1)
0.2
2) Eg
Eg
200
300
400
500
200
600 660
1) CT, FE, EET, FEE 2) ET, FM, FMM
400
Ib
0.1 30 40 50
600 660
60
70
80 90 100%
1) CT 2) ET, FE, EET, FEE, FM, FMM
Dimensions Fig. 1: CT
Fig. 2: ET, FE 4
Fig. 3: EET, FEE 8.7
7.1
5.5
54.8 64.3 74.6
46 70 94
48 63.5 77
11.9 9.7
8.7
31.8
12.7 17.1
6.4 8.7
19.1
Fig. 4: FM, MT
37 19
Fig. 5: FMM, MMT 25.4
25.4
50 50
A
A
113 14
113
Type FM FMM MT MMT
“A” Dimension 80-85 80-85 85 85
10.3
13.5 10.3
83 41 38.1
38
Dimensions in mm. 1mm = 0.0394∑ 1∑ = 25.4mm
BIF document: 720024 For complete specification data, visit our Web site at www.bussmann.com or call Bussmann Information Fax ~ 314.527.1450
71
Bussmann®
British Style BS 88 – Accessories
Indicator System and Fuse Bases (Blocks) Microswitch and Adaptor Type MAI Current Rating: AC 50/60Hz resistive load @ 250 VRMS AC 50/60Hz resistive load @ 127 VRMS
Trip Indicator
4A 6A
DC, resistive load @ 110 Vdc DC, resistive load @ 30 Vdc
0.7 2
Maximum Working Voltage: Contact-to-contact (RMS) Contact-to-contact (RMS) 2.8
2.4
1000V 1500V 3.6
5.2
5.2
Trip-indicator fuselinks are available for use in parallel with the main fuselinks. They can either be attached to the associated fuselink or mounted separately in panel mounted fuse clips, Part No. CL1. A push-on adaptor and microswitch attachment is available for use with the trip indicator to give the facility of remote indication, reference MAI or MBI.
9.5 NO
NC NC
21
21 NO
3.6
44 36
44 36
MAI
or
MBI
Universal and Stud Fuseblocks
Fuse ratings of 20A and below cannot usually accommodate a trip fuselink in parallel. Where trip indicator fuselinks are to be attached to the main fuselink, an accessory pack comprising a pair of mounting clips and an appropriate trip indicator fuselink will be required. The ordering code references for these packs are listed below: Fuse Type ET EET FE FEE LET
Order Ref. EC-600 EC-600 EC-600 EC-600 EC-250
Fuse Type FM FMM LMT LMMT
A
0.8
Order Ref. MC-600 MC-600 MC-250 MC-250
Dimensions in mm. 1mm = 0.0394∑ 1∑ = 25.4mm
Stud Fuseblocks Part No. C5268-1 C5268-2 C5268-3 C5268-4 C5268-5
Trip-indicator Fuselink Data Dim. ‘A’ Voltage Type Max. Rating TI250 37.6 250 TI500 47.5 500 TI600 55.7 600 TI700 61.8 700
Universal Fuseblocks Modular Max. Base Voltage 1BS101 600V 1BS102 600V 1BS103 600V 1BS104 600V
6
21 6.35
6
Type TI1100 TI1500 TI2000 TI2500
Dim. ‘A’ Max. 98.4 120.8 147.5 198.3
Voltage Rating 1100 1500 2000 2500
Stud Height 1.00∑ 1.75∑ 0.75∑ 1.00∑ 1.75∑
Stud Dia. & Threads fiΩ¡§-18 fiΩ¡§-18 fiΩ¡§-18 ⁄Ω¢-20 ⁄Ω¢-20
Max. Fuse Current Rating 100A 400A 400A 600A
BIF document: 720037
72
For complete specification data, visit our Web site at www.bussmann.com or call Bussmann Information Fax ~ 314.527.1450
BIF Document 1206 1207 1208 1209
Bussmann®
British Style BS 88
Curves LCT 6-20: 240V
LET 25-180: 240V
Time-Current Curve
Time-Current Curve 104 6 4
104 6 4 2
2
103
103
6 4
6 4
2
6LCT 10LCT 12LCT 16LCT 20LCT
102 6 4
2 102
6 4
Virtual Pre-Arcing Time In Seconds
Virtual Pre-Arcing Time In Seconds
2
101
2 100 6 4 2 10
80LET 100LET 125LET 160LET 180LET
6 4
2
–1
6 4
101 6 4 25LET 32LET 35LET 50LET 63LET
2 100 6 4 2 10–1 6 4
2 10–2 6 4
2 10–2
2
6 4
10–3 6 4
2 10–3
2 10–4 2
4
6
8
2 4 6 8 2 101 102 Prospective Current In Amperes RMS
4
6
8
6 4
103
2 10–4
2
101
4
6
8 102
2
4
6
8 103
Prospective Current In Amperes RMS
Peak Let-Through Curve
Peak Let-Through Curve
2
2
102 6 4
2 101
4
2 101
2 100 6 4
4
2 100 6 4
63LET 50LET 35LET 32LET 25LET
2 –1
10
4
2
10–1
2
4
6
10–1
2
4
20LCT 16LCT 12LCT 10LCT 6LCT
6 4
2
SYMMETRICAL FAULT FULLY ASYMMETRICAL FAULT
10–2
63LET 50LET 35LET 32LET 25LET
2
20LCT 16LCT 12LCT 10LCT 6LCT
6
10–2
180LET 200LMT 160LET & LMT 125 & 100LET 80LET
6 Peak Let-Through Current
4
900LMMT 800LMMT 710LMMT 630LMMT 450LMT 400 & 500LMMT 355LMT 315LMT 250LMT
6
180LET 200LMT 160LET & LMT 125 & 100LET 80LET
6 Peak Let-Through Current
102
900LMMT 800LMMT 710LMMT 630LMMT 450LMT 400 & 500LMMT 355LMT 315LMT 250LMT
6
100
2
4
6
101
2
4
6
SYMMETRICAL FAULT FULLY ASYMMETRICAL FAULT
10–2 102
–2
10
2
4
6
10–1
Prospective Short-Circuit Current Symmetrical RMS
BIF document: 35785296 For complete specification data, visit our Web site at www.bussmann.com or call Bussmann Information Fax ~ 314.527.1450
2
4
6
100
2
4
6
101
2
4
6
102
Prospective Short-Circuit Current Symmetrical RMS
BIF document: 35785293
73
Bussmann®
British Style BS 88
Curves LMT 160-450: 240V
LMMT 400-900: 240V
Time-Current Curve
Time-Current Curve
104
104 6 4
6 4 2
2
103
103
6 4
6 4
2
101 6 4
400LMMT 500LMMT 630LMMT 710LMMT 800LMMT 900LMMT
102 6 4 2
Virtual Pre-Arcing Time In Seconds
2 Virtual Pre-Arcing Time In Seconds
2
160LMT 200LMT 250LMT 315LMT 355LMT 400LMT 450LMT
102 6 4
2 100 6 4 2 10–1 6 4
101 6 4 2 100 6 4 2 10–1 6 4
2
2
10–2 6 4
10–2 6 4
2
2
10–3
10–3 6 4
6 4 2
2
10–4 2
102
4
6
8 103
2
4
6
10–4
8 104
2
102
4
Prospective Current In Amperes RMS
Peak Let-Through Curve
102
900LMMT 800LMMT 710LMMT 630LMMT 450LMT 400 & 500LMMT 355LMT 315LMT 250LMT
4
2 101
4
6
8 104
4
2 101
180LET 200LMT 160LET & LMT 125 & 100LET 80LET
6 Peak Let-Through Current
4
900LMMT 800LMMT 710LMMT 630LMMT 450LMT 400 & 500LMMT 355LMT 315LMT 250LMT
6
180LET 200LMT 160LET & LMT 125 & 100LET 80LET
6 Peak Let-Through Current
2
2
6
2 100 6
4
2 100 6
4
4 63LET 50LET 35LET 32LET 25LET
2 10–1
4
2
10
2
4
6
10–1
2
4
–1
20LCT 16LCT 12LCT 10LCT 6LCT
6 4
2
SYMMETRICAL FAULT FULLY ASYMMETRICAL FAULT
10–2
63LET 50LET 35LET 32LET 25LET
2
20LCT 16LCT 12LCT 10LCT 6LCT
6
6
100
2
4
6
101
Prospective Short-Circuit Current Symmetrical RMS
BIF document: 35785294
74
8 103
Peak Let-Through Curve
2 102
10–2
6
Prospective Current In Amperes RMS
2
4
6
SYMMETRICAL FAULT FULLY ASYMMETRICAL FAULT
10–2 102
10–2
2
4
6
10–1
2
4
6
100
2
4
6
101
2
4
Prospective Short-Circuit Current Symmetrical RMS
BIF document: 35785295 For complete specification data, visit our Web site at www.bussmann.com or call Bussmann Information Fax ~ 314.527.1450
6
102
Bussmann®
British Style BS 88
Curves CT 6-20, ET 25-80: 690V
EET 90-160, MT 160-355: 690V
Time-Current Curve
Time-Current Curve
104 6 4
104 6 4
2
2
103 6 4
103
Virtual Pre-Arcing Time In Seconds
2 101 6 4
2 102 6 4 Virtual Pre-Arcing Time In Seconds
2 102 6 4
6CT 10CT 12CT 16CT 20CT
2 100 6 4
160MT 180MT 200MT 250MT 280MT 315MT 355MT
6 4
25ET 32ET 35ET 40ET 45ET 56ET 63ET 80ET
2 10–1
2 101 6 4
90EET 110EET 140EET 160EET
2 100 6 4 2 10–1
6 4
6 4
2
2
10–2 6 4
10–2 6 4
2
2
10–3
10–3
6 4
6 4
2 10–4
2 2
4
6
8 101
2
4
6
8 102
2
4
6
8 103
10–4
2
4
6
8 102
Prospective Current In Amperes RMS
2
4
6
8 103
2
4
6
8 104
Prospective Current In Amperes RMS
Peak Let-Through Curve
Peak Let-Through Curve
6
6
4 2 315MT 355MT 280MT 250MT
105 6
180MT 160MT
4
710MMT 630MMT 560MMT 500MMT 450MMT 400MMT 355MMT 315MMT 280MMT 200MT 225MMT 200MMT 180MMT
4 2
6
2
2 Peak Let-Through Current
Peak Let-Through Current
180MT 160MT
4
104 6 4 2 103 6
104 6 4 2 103 6
160EET 140EET 110EET 90EET
4 80ET 63ET 56ET 45ET 40ET 35ET 32ET 25ET
2 20CT 16CT 12CT 10CT 6CT
102 6
160EET 140EET 110EET 90EET
4 80ET 63ET 56ET 45ET 40ET 35ET 32ET 25ET
2 20CT 16CT 12CT 10CT 6CT
102 6
4
4
2
2
101 10
315MT 355MT 280MT 250MT
105
710MMT 630MMT 560MMT 500MMT 450MMT 400MMT 355MMT 315MMT 280MMT 200MT 225MMT 200MMT 180MMT
1
2
4
6
10
2
2
4
6
10
3
2
4
6
10
4
2
4
6
10
5
2
Prospective Short-Circuit Current Symmetrical RMS
101 101
2
4
6
102
2
4
6
103
2
4
6
104
2
4
6
105
2
Prospective Short-Circuit Current Symmetrical RMS
BIF document: 35785312 For complete specification data, visit our Web site at www.bussmann.com or call Bussmann Information Fax ~ 314.527.1450
BIF document: 35785313
75
Bussmann®
British Style BS 88
Curves MMT 180-710: 690V
FE 35-100 & FM 180-350: 690V
Time-Current Curve
Time-Current Curve
104
104 6 4
6 4
2
2
400MMT 450MMT 500MMT 560MMT 630MMT 710MMT
103 6 4 2
103 6 4 2
102 Virtual Pre-Arcing Time In Seconds
Virtual Pre-Arcing Time In Seconds
6 4 180MMT 200MMT 225MMT 280MMT 315MMT 355MMT
2 101 6 4
180FM 200FM 220FM 250FM 280FM 315FM 350FM
102 6 4
2 100 6 4
2 101 6 4 2
35FE 40FE 45FE 50FE 63FE 71FE 80FE 90FE 100FE
100 6 4 2 10–1 6 4
2 10–1
2
6 4
10–2 6 4
2
2
10–2
10–3 6 4
6 4 2
2
10–3
10–4
6 4
2
4
6
8 102
2
4
6
8 103
2
4
6
8 104
Prospective Current In Amperes RMS
2 10–4
2
102
4 6 8 2 4 6 103 Prospective Current In Amperes RMS
8
104
Peak Let-Through Curve
Peak Let-Through Curve 105
6 4 2 315MT 355MT 280MT 250MT
105 6
180MT 160MT
4 2
6 4
Peak Let-Through Current
2 10
4
6 4 2 10
350FM 315FM 280FM 250FM 225FM 200FM 180FM
104
Peak Let-Through Current
4
6
710MMT 630MMT 560MMT 500MMT 450MMT 400MMT 355MMT 315MMT 280MMT 200MT 225MMT 200MMT 180MMT
2 103 6 4 2
3
160EET 140EET 110EET 90EET
4 80ET 63ET 56ET 45ET 40ET 35ET 32ET 25ET
2 20CT 16CT 12CT 10CT 6CT
102 6
4 2
101
2
4
6
102
2
4
6
103
2
4
6
104
2
4
6
Prospective Short-Circuit Current Symmetrical RMS
2
101
6
101
4
101
100FE 90FE 80FE 71FE 63FE 50FE 45FE 40FE 35FE
102
6
2
4
6
102
2
4
6
103
2
4
6
104
2
4
6
105
2
Prospective Short-Circuit Current Symmetrical RMS
BIF document: 35785311
76
BIF document: 35785314 For complete specification data, visit our Web site at www.bussmann.com or call Bussmann Information Fax ~ 314.527.1450
105
2
Bussmann®
British Style BS 88
Curves FEE 100-200 & FMM 400-700: 690V Time-Current Curve 104 6 4 2 103 6 4 2 400FMM 450FMM 500FMM 550FMM 630FMM 700FMM
Virtual Pre-Arcing Time In Seconds
102 6 4 2 101 6 100FEE 4 120FEE 140FEE 2 160FEE 180FEE 100 200FEE 6 4 2 10–1 6 4 2 10–2 6 4 2 10–3 6 4 2 10–4
2
102
4 6 8 2 4 6 103 Prospective Current In Amperes RMS
8
104
Peak Let-Through Curve 700FMM
8
630FMM 6
550FMM 500FMM 450FMM
4
400FMM
Peak Let-Through Current
2
104 8 6
4
2
103 200FEE
8
180FEE 6
160FEE 140FEE
4
120FEE 100FEE
2 102
2
4
6
103
2
4
6
104
2
4
6
105
2
Prospective Short-Circuit Current Symmetrical RMS
BIF document: 35785292 For complete specification data, visit our Web site at www.bussmann.com or call Bussmann Information Fax ~ 314.527.1450
77
Bussmann
®
Worldwide Circuit Protection Solutions
Bussmann
North America’s leading supplier of fuses and fusible protection systems, Bussmann continues its 80-year history of blazing new trails of innovative technologies. Maker of the industry’s first truly global product line, each item is backed by an efficient worldwide network of distribution, customer service and technical support. Bussmann products include the most extensive circuit protection solutions that are built and tested to a variety of major standards: U.L., CSA, IEC, ISO. . . Additionally, both European (DIN, British Standard) and North American styled fuses are used for a wide range of applications: industrial motor protection, power conversion, medium voltage power distribution, telecommunications network equipment, electronics, and automotive. Manufacturing operations in the U.S., Denmark, and the United Kingdom have earned ISO 9000 certification, assuring Bussmann customers only the utmost quality across every product line. Knowledgeable. Responsive. Customer focused. Bussmann continues to set the standard for circuit protection solutions in the global marketplace.
Bussmann—The Source For Global Solutions In Semiconductor Protection Today’s power electronics market knows no international boundaries – so neither should the high speed fuses that are used to protect semiconductor devices. Only one fuse maker – Bussmann – has the resources required to meet all of the power conversion industry’s principle needs: • Knowledgeable technical support • Cutting-edge application design
• Global sourcing & manufacturing (certified to ISO 9000 standards)
Bussmann offers a comprehensive range of high speed fuselinks, specifically designed for semiconductor device protection. These products use advanced materials and technology to deliver unsurpassed performance. All high speed fuses carry the quality assurance of the Bussmann name – the recognized world leader in circuit protection.
Headquarters Cooper Industries Bussmann Division P.O. Box 14460 St. Louis, Missouri 63178-4460, USA Telephone: 314-394-2877 Facsimile: 800-544-2570 Bussmann Circuit Components 7300 West Wilson Avenue Chicago, IL 60656-4793, USA Telephone: 708-867-4600 Facsimile: 708-867-2211 European Headquarters Bussmann Division Cooper (UK) Limited Burton-on-the-Wolds Leicestershire LE12 5th, England Telephone: 44 1509 882737 Facsimile: 44 1509 882786 Bussmann Asia Pacific 331 North Bridge Road #03-02 Odeon Towers Singapore 188720 Republic of Singapore Telephone: 65 336 3610 Facsimile: 65 336 4810 Bussmann Australia Block X 391 Park Road P.O. Box 257 Regents Park, Sydney NSW 2143, Australia Telephone: 61 2 9743 8333 Facsimile: 61 2 9743 8070
Bussmann Brasil Bussmann do Brasil Ltda. Rodovia Santos Dumont, Km 23 13 300-000 Cruz das Almas Caixa Postal 95-Itu Sao Paulo-Brasil Telephone: 55 11 7824 1722 Facsimile: 55 11 7824 1721 Bussmann Denmark 5 Literbuen DK-2740 Skovlunde Copenhagen, Denmark Telephone: 45 4485 0900 Facsimile: 45 4485 0901 Bussmann India 2nd Floor, Unit #5 White House 23-29, St. Marks Road Bangalore – 560-001 India Telephone: 91-80-227-0893 Facsimile: 91-80-224-0124 Bussmann Mexico Arrow-Hart S.A. de C.V. Poniente 148, No. 933 02300 Mexico, D.F. Mexico Telephone: 52 5 587 0211 Facsimile: 52 5 567 4049
This brochure summarizes the features and benefits of the following high speed fuses that Bussmann manufactures for the power electronics market: • North American • British
• European (DIN) • Ferrule
This catalog is intended to present product data and provide technical information that will help the end user with design application. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this catalog. Once a product has been selected, it should be tested by the user in all possible applications. ©1998 Cooper Industries, Bussmann Division Printed in the U.S.A.
http://www.bussmann.com