S/TRI/SGT967360/B/7/05/2002
page 1 / 2 F/GB
Relais Statique Triphasé Three Phase Solid State Relays
SGT967360 24 to 600 VAC - 75 ARMS
• Sortie AC pour charge résistives. • Commande 8,5-30 Vdc avec LED. • Possibilité de protection IP10 en option:Capot 1K199 000. • AC output for résistives loads. • 8,5-30 VDC control voltage with LED. • Protection IP10 optional (1K199 000).
Dimensions / Dimensions:
Circuit équivalent/Equivalent circuit :
Application typique /Typical application: R
S
T
R
S
T
R
S
T
1L1
A1 +
39,5
Adaptateur / Adapter 2T1
82,7 19
3L2
19
Adaptateur / Adapter
LED Resistive or inductive load
4T2
M
5L3
5L3
40
73,5
3L2
23
A2 -
1L1
58,4
4,4
Adaptateur / Adapter
A2 -
6T3
A1+ 2T1
4T2
6T3
91 100
fig. 1 :Caractéristique d'entrée / Control characteristic
Caractéristiques de commande (à 20°C) / Control characteristics (at 20°C) Symbol Uc Ic Uc off Rc Urv
DC Nom 24 35
Min 8,5 10 4
Max 30 45
620 30
Caractéristiques d'entrée-sortie (à 20°C) / Input-output characteristics (at 20°C) Isolement entrée-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 3300 Tension assignée isolement/ Rated impulse voltage Uimp 4000
Unit V mA V Ω V VRMS VRMS V
50 40
Ic(mA)
Paramètre / Parameter Tension de commande / Control voltage Courant de commande / Control current (@ Uc ) Tension de relachement/Release voltage Résistance interne / Input internal resistor fig.1 Tension inverse / Reverse voltage
30 20 10 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
Uc(V)
Caractéristiques générales / General characteristics Paramètre / Parameter Poids/Weight Plage de température de stockage / Storage temperature range Plage de température de fonctionnement/Operating temperature range
Proud to serve you All technical caracteristics are subject to change without previous notice. Caractéristiques sujettes à modifications sans préavis.
Conditions
Symbol
Typ. 370 -40 / +100 -40 / +100
Unit g °C °C
celduc r
e
l
a
i
s
S/TRI/SGT967360/B/7/05/2002
page 2 / 2 F/GB
Caractéristiques de sortie(à 20°C) / Output characteristics (at 20°C) Paramètre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crête / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorçage / Latching voltage Courant nominal AC-51/ AC-51 nominal current
Conditions
Ie nom ( see Fig. 2 )
Courant de surcharge non répétitif /Non repetitive overload current Chute tension directe crête/ On state voltage drop Courant de fuite état bloqué/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de fréquence / Operating frequency range dv/dt état bloqué / Off state dv/dt dI/dt maximum non répétitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunité conduite / Conducted immunity level EMC Test d'immunité conduite / Conducted immunity level Conformité / Conformity Caractéristiques thermiques / thermal curves :
Symbol Ue Uemin-max Up Usync Ua Ie AC-51
tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz
Typ. 400 24-600 1200 24 10 75
Unit V rms V rms V V V A rms
Itsm Vd Ilk Ie min ton max toff max f dv/dt di/dt I2t
Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz
IEC 1000-4-4 (burst) IEC 1000-4-5(schocks) EN60947-4-x
1000 A 1,4 V 1 mA 5 mA 10 ms 10 ms 10-440 Hz 500 V/µs 50 A/µs 5000 A2s 2kV criterion A 2kV crit.A with external VDR
300 280 260
Total wasted power (W)
240
Full on-state
0,3K/W
220 200 180 0,55K/W
160 140 120
0,95K/W
100 80 60
1,2K/W
40 20
without heatsink
0 0
10
Fig.3 Courbes de surcharge de courant / Overload current curves Surge current Itsm (A peak) = f(t)
20 30 40 50 60 RMS load current (A)
Itsm (Apeak)
80
0 10 20 30 40 50 60 70 80 90 100 Ambient temperature (°C)
1 -Itsm non répétitif sans tension réappliquée est donné pour la détermination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection.
for models with Itsm =1000A
1500
No repetitive Itsm (Apeak)=f(t) without voltage reapplied
1000
500
0
70
Repetitive Itsm (Apeak)=f(t) with voltage reapplied for initial Tj =70°C
0,01
0,1
t (s)
1
10
2 -Itsm répétitif est donné pour des surcharges de courant (Tj initiale=70°C). La répétition de ces surcharges de courant diminue la durée de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70°C. The repetition of the surge current decrease the lifetime SSR's .
Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains.
Précautions : * Les relais à semiconducteurs ne procurent pas d'isolation galvanique entre le réseau et la charge.
celduc r
e
l
a
i
www.celduc.com
s
Rue Ampère B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tél. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tél. +33 (0) 4 77 53 90 19