GBR outside.pdf 2012-07-23 오후 4:37:52
C
M
Y
CM
MY
CY
CMY
K
GBR intside.pdf 2012-07-23 오후 5:39:35
[ While fastening Tent Screw ]
With Tent Screw, primary vertical and horizontal formation is possible without placing the implant
Neo GBR kit’s Tent Screw is a Temporary Screw that works as a prop to procure space to enable vertical and horizontal bone formation on large defected area
By utilizing the Cover Screw, fixation of membrane to the Tent Screw is done with ease
1. Insert 3mm or more into the bone and needs primary stability of 15~25Ncm
Secondary stabilization of the membrane is completed with Fixing Screw
2. Tent Screw could break when 30Ncm is exceeded
With Tent Screw space for bone formation on the vast defect area can be maintained
3. Insert to the level of bone grafting
Bone formation utilizing Spacer, Membrane and Cover Screw after placing Implant
Fix Tent Screw with Dual Hex Driver after drilling with 1.5
Fix Tent Screw with Dual Hex Driver after drilling with 1.3
Fix Tent Screw with Dual Hex Driver after drilling with 1.0
Insert by Self Tapping
By utilizing Neo GBR kit, Tent Screw, Cover Screw and Fixing Screw, vertical and horizontal bone level can be augmented.
[ While fastening Fixing Screw ] Neo GBR kit’s Fixing Screw secondarily stations Membrane and maintains the desirable volume of bone formation C
M
Y
CM
MY
(For Contra angle)
(For Handle)
CY
Fixate Fixing Screw with Phillips Driver after drilling with 1.3
CMY
Fixate Fixing Screw with Phillips Driver after drilling with 1.0
Self Tapping
Self Tapping with 5~7mm Screw
Tent Screw connected to dual Hex Driver 1.6 Hex
K
bone level augmentation for vertical, horizontal and wide area maintaining space for bone formation to ease the fixing of membrane
screw to secondarily stabilize the membrane Cover Screw connected to dual Hex Driver 1.0 Hex
Stopper connected to Drill
to stabilize and submerge Tent Screw, Spacer and Membrane
Connect stopper to Drill
Drill at least 3mm depending on the bone density
Insert Tent Screw leaving space for augmentation (15~25Ncm)
Decortificated surroundings after Tent Screw insertion
Choose appropriate CTi-mem
Tighten Fixing Screw in to Fixing Hole
Create matching hole for Cover Screw on CTi-mem with tweezers
Prior to Bone grafting, to avoid bone material from entering Tent Screw, insert material after tightening Cover Screw. Check for correspondence with Cover Screw Hole
After removing Cover Screw apply CTi-mem, fixate Tent Screw on CTi-mem with Cover Screw(10~15Ncm)
Adapt the remaining part of CTi-mem to the tissue and cover up
to fixate Membrane using Cover Screw after connecting Spacer to Fixture directly
Fixing Screw connected to Phillips Driver
Stopper connected to Drill