AUDIO VISUAL SUPPORT MODEL: AD3/95-LCD-S & AD3/95-LCD-PB ASSEMBLY INSTRUCTIONS
Model shown: AD3/95-LCD-PB
�
BEFORE STARTING THIS ASSEMBLY PLEASE TAKE TIME TO FAMILIARISE YOURSELF WITH THE COMPONENTS LISTED ON THE BACK PAGE
Alphason Designs Limited Alphason House, Bolton Road, Atherton, Greater Manchester M46 9AW UK Tel: +44 (0)1942 885600 Fax: +44 (0)1942 876955
www.alphasondesigns.com
issue 01 06/06 181754
STAGE 1 Place top glass shelf A on a clean flat surface to prevent scratching. Remove spigot nut F and washer E from rods D to be used later.
D D
D I I
Place metal top caps G through holes in glass shelf A from underside.
I D
B B
B
Screw threaded rods D into top caps G and tighten by hand.
I
H H
Place plastic top tube end plugs H (with larger hole) over rods D . Ensure flat surface of H is facing down.
H G A
G
B
G
Fit shorter steel tubes B over threaded rods and locate on top tube end plugs H .
H
G
Place tube end plugs I over rods and locate in steel tube. Ensure flat surface faces up.
STAGE 2 Locate and position glass shelf A over the four rod assemblies. Place plastic spacers K over rods and into holes in glass shelf A . Place tube end plugs I over rods and onto glass shelf A with flat surface facing down.
D I K
D
D
I K
I K A
D I K
issue 01 06/06 181754
STAGE 3
I
I
I I
C
C
Fit longer steel tubes C over rod assemblies and locate on tube end plugs I.
C
I
I
Place tube end plugs I over rods and locate in tube ends. Ensure flat surface faces up.
C
I
I
STAGE 4 Locate and position glass shelf A .
L L
Locate plastic spacers K into holes in glass shelf A . Place plastic washers N over rod assemblies. Place washers E (previously removed from rods) over rod assemblies. Attach spigot nuts F (previously removed from rod D ) and tighten using supplied spanner M . Care should be taken not to overtighten the spigot nut as this may result in damage to the glass.
J J
L
E N
F E
F
K
N K
L J F E N
L J K
F E
A
N K
Attach cover caps J , to spigot nuts F , ensure the cover cap locates securely. Insert cover cap inserts L . Turn the entire assembly over to rest on feet.
issue 01 06/06 181754
MODEL: AD3/95-LCD-S & AD3/95-LCD-PB CERTIFICATE OF CONFORMITY COMPONENT
DESCRIPTION
QTY
A
GLASS SHELF
3
B
185mm TUBE
4
C
260mm TUBE
4
D ROD
E WASHER F SPIGOT NUT
PACKED BY
4
G
TOP CAP
4
H
TOP TUBE END PLUG
4
I
TUBE END PLUG
12
J
COVER CAP
4
K
PLASTIC SPACER
8
L
COVER CAP INSERT
4
M
SPANNER
1
N
PLASTIC WASHER
4
This document is your guarantee that the product has reached you in the highest of quality standards. Should you have any cause for complaint please return this document with your correspondence to the address given at the bottom of the front page. issue 01 06/06 181754