PRODUCT INFORMATION Date:
KCE-400BT Installation and Setup. Page 1/5
23.03.2010
Connection and Setup for iXA-W404R + KCE-400BT
iXA-W404R
KCE-400BT
Mute-cable: (Pink/Black) This cable MUST be connected
System cable
AI NET RCA Video Speaker System Cable (RGB) Remote Mute
ALPINE ALPINE ELECTRONICS ELECTRONICS (Europe) (Europe) GmbH GmbH Service/QC Department QC/Service Department
Address: Wilhelm-Wagenfeld-Str 1-3, 80807 Munich, Germany Address : Wilhelm-Wagenfeld-Str 1-3, 80807 Munich, Germany Tele: +49 (0) 89 324264 456 FAX : +49 (0) 89 324264-777 456 Phone : +49 (0) 89 324264-0 FAX : +49 (0) 89 324264-456 E-mail: service-europe@alpine.de
PRODUCT INFORMATION Date:
23.03.2010
KCE-400BT Installation and Setup. Page 2/5
Connection and Setup for IVA-W502R/W505R + KCE-400BT
1. Completely disconnect the head unit from the 12v power (ACC and BATT). 2. Firstly connect the earth wire of the KCE-400BT then you can connect the ACC/BATT cables.
NOTE: The ACC cable of the KCE-400BT should ONLY be connect to the same ACC supply as the head unit!!!!!!!!!! To be 100% sure of this it is recommended to connect the ACC cable of the KCE-400BT to the very same cable as the head unit.... 3. Now you can connect the KCE-400BT to the head unit with the supplied 13 pin system cable.
4. Now connect the Pink/Black mute cable of the 400BT with the Pink/Black mute cable of the head unit..
5. Make sure there are no active bluetooth devices near by (see note below) before you connect to 12volts..
NOTE: As soon as the KCE-400BT is connected to BATT it is active and will be visable to other bluetooth devices, this needs to be avoided because the setup is not yet complete, it is better to make sure that there are no active bluetooth devices within range of the KCE-400BT. AI NET RCA Video Speaker System Cable (RGB) Remote Mute
ALPINE ALPINE ELECTRONICS ELECTRONICS (Europe) (Europe) GmbH GmbH Service/QC Department QC/Service Department
Address: Wilhelm-Wagenfeld-Str 1-3, 80807 Munich, Germany Address : Wilhelm-Wagenfeld-Str 1-3, 80807 Munich, Germany Tele: +49 (0) 89 324264 456 FAX : +49 (0) 89 324264-777 456 Phone : +49 (0) 89 324264-0 FAX : +49 (0) 89 324264-456 E-mail: service-europe@alpine.de
PRODUCT INFORMATION Date:
23.03.2010
KCE-400BT Installation and Setup. Page 3/5
Connection and Setup for iXA-W404R + KCE-400BT
1. Turn the unit ON by pressing the “SOURCE” button. Press and hold the “SETUP“ button (+2 seconds)
2. In the “SETUP” you need to select the option “SYSTEM SETUP”
3. The setting for “IN Int.Mute” needs to be “OFF”.
4. Now in the “SYSTEM SETUP” select the option “BLUETOOTH IN” and change it to “ADAPTER”.
NOTE: If the unit is frozen and the above steps are not possible you will have to disconnect the Pink/Black mute cable, to change the settings. But DO NOT forget to reconnect the mute cable!!
5. Once the “BLUETOOTH IN” has been set to “ADAPTER” you can exit the menu by pressing the “RETURN” button which can be found in on the left near the volume knob.
ALPINE ALPINE ELECTRONICS ELECTRONICS (Europe) (Europe) GmbH GmbH Service/QC Department QC/Service Department
6. Now you need to carry out a ”RESET” by pressing the reset switch, wait a couple of seconds and then turn the unit back ON.
Address: Wilhelm-Wagenfeld-Str 1-3, 80807 Munich, Germany Address : Wilhelm-Wagenfeld-Str 1-3, 80807 Munich, Germany Tele: +49 (0) 89 324264 456 FAX : +49 (0) 89 324264-777 456 Phone : +49 (0) 89 324264-0 FAX : +49 (0) 89 324264-456 E-mail: service-europe@alpine.de
PRODUCT INFORMATION Date:
23.03.2010
KCE-400BT Installation and Setup. Page 4/5
Connection and Setup for iXA-W404R + KCE-400BT
7. Press and hold the “SETUP” button again to get into the setup menu, then select the option “SOURCE SETUP”, now select the option “BLUETOOTH SETUP” by touching the >> soft-key. NOTE: If the “BLUETOOTH SETUP” option is not listed carry out steps 1 to 7 again!!
8. Now select the option “DEVICE SEARCH“ by touching the soft-key >> . NOTE: Before carrying this step out reactivate the BT of the phone you want to connect, and check in the phone menu that it is in visible mode!!
9. The display will now show the pop up message “NOW SEARCHING”.
10. When “Searching“ is complete the phone you want to connect should be shown in the “CONNECT DEVICE“ list. Select your phone by touching on the name itself..
11. Now a key pad will appear in the display to allow you to enter a connection code the factory set code is “0000“ enter this code and then touch the “ENT“ soft-key..
12. Once step 11 is completed, a key pad will appear
ALPINE ALPINE ELECTRONICS ELECTRONICS (Europe) (Europe) GmbH GmbH Service/QC Department QC/Service Department
in the display of your phone allowing you to enter the connection code which again is: “0000“. Address: Wilhelm-Wagenfeld-Str 1-3, 80807 Munich, Germany Address : Wilhelm-Wagenfeld-Str 1-3, 80807 Munich, Germany Tele: +49 (0) 89 324264 456 FAX : +49 (0) 89 324264-777 456 Phone : +49 (0) 89 324264-0 FAX : +49 (0) 89 324264-456 E-mail: service-europe@alpine.de
PRODUCT INFORMATION Date:
23.03.2010
KCE-400BT Installation and Setup. Page 5/5
Connection and Setup for iXA-W404R + KCE-400BT
13. If the codes have been correctly enter this message “NOW CONNECTING” will appear in the display of the iXA-W404R..
15. If you want to check if your phone is paired with the 400BT simply select “SETUP“ “SOURCE SETUP”, “BLUETOOTH“ then “PAIRED DEVICES” the name of the phone that is paired with the 400BT will be highlighted in blue...
14. Then the message will change to “CONNECTED”. Showing the name of the phone you selected in step 10..
16. When you press the “TELEPHONE“ button you will go directly into the telephone menu..
NOTE:
17. Some of the option in the “TELEPHONE MENU“ may not be available when you select them please check the compatibility list.
ALPINE ALPINE ELECTRONICS ELECTRONICS (Europe) (Europe) GmbH GmbH Service/QC Department QC/Service Department
If you experience any difficulties with connecting /pairing when the searching and connection has been carried out via the W502R/W505R, it is also possible to carry out the connecting/pairing by searching via the phone BT menu, but before trying this it is recommend to completely re-start from step 1 of this product information, it is also recommended to re-set the phone, this information can be found in the users manual for you phone.....
Address: Wilhelm-Wagenfeld-Str 1-3, 80807 Munich, Germany Address : Wilhelm-Wagenfeld-Str 1-3, 80807 Munich, Germany Tele: +49 (0) 89 324264 456 FAX : +49 (0) 89 324264-777 456 Phone : +49 (0) 89 324264-0 FAX : +49 (0) 89 324264-456 E-mail: service-europe@alpine.de