Derbigum Two Layer Torch-Applied Bituminous Overlay When to Specify Derbigum two layer, torch applied, high performance overlay systems offer the highest levels of durability and waterproof integrity when refurbishing existing roofs which have reached the end of their life.
Key Features Lifespan In the Derbigum BBA Certificate 86/1593C, the BBA say ‘All available evidence suggests that the product will have a life in excess of 30 years.’
Durability Derbigum has a high softening point ensuring stability of the membrane in the hottest weather, high tensile strength and excellent puncture resistance. Derbigum can be installed without any surfacing, regardless of the method of application due to the unique blend of polymers which make Derbigum resistant to UV degradation.
Derbigum Cap Sheet (Black or Mineral) Hi-Ten Universal Underlay
Performance Derbigum is a range of dual-reinforced, APP (Atactic Polypropylene) modified bitumen, high performance roofing and waterproofing membranes with a life expectancy of 30-35 years according to independent assessment. Enhanced performance properties include low temperature flexibility, excellent fire ratings, stronger reinforcement and ease of application.
Existing Built-up Roofing (primed)
Cost-effective Derbigum Two Layer Systems combine proven durability with speed and ease of installation and significantly extend the life of the roof without the need for the stripping up of the existing roofing, minimising disruption and disposal costs.
Quality Alumasc operates a quality assurance management system which is independently audited to BS EN ISO 9001:2008. Alumasc extends this quality management to their network of approved installers, for single source accountability and peace of mind. Existing Woodwool Deck
CERTIFICATE No 86/1593
Warranties Alumasc offers a comprehensive range of warranty options. The typical warranty period for Derbigum is 20 years. Installed exclusively by Derbigum Approved Contractors and underpinned by Alumasc’s extensive project support service, Alumasc warranties cover both product and installation. Independent insurance backed latent product defect warranties are also available through FSA licensed brokers.
ALUMASC EXTERIOR BUILDING PRODUCTS LTD Tel: +44 (0)1744 648400
Email: waterproofing@alumasc-exteriors.co.uk
Website: www.alumascwaterproofing.co.uk Ref: SD006FR Issued: 01/06/12 Page 1 of 2
Environment Alumasc actively pursues sustainability in the full range of products and systems the company offers through its accreditation to the ISO 14001:2004 Environmental Management Standard. Alumasc, its partners and its suppliers are committed to putting consideration for the built and wider environment at the core of all aspects of their current business and future development. Derbigum membranes are 100% recyclable.
Derbigum Two Layer Torch-Applied Bituminous Overlay System Components Application 1. Prepare the existing roofing system to receive the new waterproofing as necessary. Ensure that the roof is clean and dry and free from dust and debris. 2. Prime the existing waterproofing and upstands with Alumasc Bitumen Primer and allow to fully dry. 3. Install Hi-Ten Universal underlay, fully bonded by torch application, with 100mm side and 150mm end laps. 4. Install Derbigum Black (or Mineral) Cap Sheet, fully bonded by torch application. Joints to be staggered with underlay.
n Derbigum Black or Mineral Cap sheet is a high performance, APP modified bituminous membrane, with dual glass/polyester reinforcement, applied by torch. n Hi-Ten Universal is a polyester based underlay, suitable for torch application (or by bonding in hot bitumen where appropriate). n Alumasc Bitumen Primer is a low viscosity, solvent-based bitumen primer intended to maximise the adhesion of bituminous membranes to metal and porous substrates.
5. Note: Pre-cut the lower corner of the end of each roll at 45º where it will be overlapped by the end lap of the next roll. 6. Seal side laps (100mm) end laps (150mm) with a shoe burner torch. All laps must be pressure rolled with a 15kg long handled roller. A small (approx 5-10mm) continuous bead of compound must always visible at the joint. 7. All detail work to be executed in two layers, the first layer being Hi-Ten Universal, followed by the cap sheet of Derbigum, both fully bonded by torching. At all upstands install a 100 x 100mm reinforcement strip of Derbigum Black into the angle. The main sheet area must overlap onto the reinforcing strip by the full 100mm. Install a final flashing piece of Derbigum, fully bonded to the upstand and overlapping onto the main horizontal sheet area by a minimum of 100mm. NB: Euroroof Rapid waterproofing is exclusively installed by specialist contractors that have been trained and approved in the installation of Euroroof systems.
Technical Support Alumasc Technical Services provide an extensive project support service that includes site surveys, project specifications, performance calculations (e.g. U-values, condensation risk analysis), CAD detail drawings and general technical advice. Contact Alumasc Technical Services via: +44 (0) 1744 648400 waterproofing@alumasc-exteriors.co.uk Online resources are available on our website or via the embedded links below: Web Links Brochures & Datasheets NBS Specifications The company pursues a policy of constant product development and information contained in this publication is therefore subject to change without notice. The customer is responsible for ensuring that each product is fit for its intended purpose and that the conditions for use are suitable. All quoted data is nominal and subject to production tolerances.
ALUMASC EXTERIOR BUILDING PRODUCTS LTD Tel: +44 (0)1744 648400
Email: waterproofing@alumasc-exteriors.co.uk
Website: www.alumascwaterproofing.co.uk Ref: SD006FR Issued: 01/06/12 Page 2 of 2
CAD Drawings for typical details www.alumascwaterproofing.co.uk