click it to wall Bringing laminate flooring to your wall!
www.krono-original.com
Made in Germany
• Unlimited design possibilities • Decors are interchangeable with each other • Durable laminate surface • Easy to clean
Bringing laminate flooring to your wall!
Easy to replace! Thanks to the flexible velcro system, the panels can be changed with ease. New panels can simply be installed on to the existing sub-frame.
CLICK IT TO WALL
01/12/01
Made in Germany
Installation with matching accessories
Verlegeanleitung / Installation instructions
Zubehör Guarantee is only for Krono Original® products, but may also be applied to other products following an inspection of their Garantie nur für Krono Original Produkte, andere Produkte nur nach Prüfung der Klebeeigenschaften möglich. adhesive 1clic2go joint, the installation of muss zuerst die Reihe zusammengeklickt werden Bei 1clic2goproperties. - VerbindungWith ist eineaEinzelverlegung möglich, bei allen anderen Zubehör und anschließend dieiskomplette in die Nutofeingefädelt werden. individual panels possible.Reihe In the case other click systems, each row must first be initially clicked together and then the entire Guarantee is only for Krono Original products, but Produkte may also be to other products following an möglich. inspection of their adhesiGarantie nur für Krono Original Produkte, andere nurapplied nach Prüfung der Klebeeigenschaften row fitted into place. Laminate floors with integrated silence ve With a 1clic2go joint, the laying of individual panels is anderen possible. muss In thezuerst case of otherzusammengeklickt click systems, eachwerden row must Beiproperties. 1clic2go - Verbindung ist eine Einzelverlegung möglich, bei allen dieallReihe pads are not suitable for use with “click it to wall”. be initially clicked together and the entire row can then be subsequently fit into place. und anschließend die komplette Reihe in die Nut eingefädelt werden.
CLICK IT TO WALL
Verlegeanleitung / Installation instructions
Guarantee is only for Krono Original products, but may also be applied to other products following an inspection of their adhesive properties. With a 1clic2go joint, the laying of individual panels is possible. In the case of all other click systems, each row must be initially clicked together and the entire row can then be subsequently fit into place.
1. xxxxMaterial vor Verlegung akklimatisieren und im zu verlegenden Raum 48 h lagern.
Acclimatise the material before laying vor andVerlegung store it in 1. xxxxMaterial the room in which is to akklimatisieren unditim zube laid for 48 hours. verlegenden Raum 48 h
2. xxxxxBenötigtes Werkzeug
Tools required
2. xxxxxBenötigtes Werkzeug
3. xxxxxUnterkonstruktion/Lattung anbringen
4. xxxxxKlettverschlüsse an der Lattung anschrauben
Attach running boards as subconstruction
Screw the pads with touch fastener to the running boards
3. xxxxxUnterkonstruktion/Lattung anbringen
4. xxxxxKlettverschlüsse an der Lattung anschrauben
5. xxxxAnzahl der Pads in der 1. Reihe beträgt mind. 8 (je 4 Pads feder- und nutseitig im Abstand von ca. 40 mm). Ab der 2. Reihe reichen 4 Pads auf der Nutseite, da das Paneel mit der Feder in der Nut verriegelt wird und 5. xxxxAnzahl der Pads in der 1. Reihe somit Halt bekommt. beträgt mind. 8 (je 4 Pads feder- und The number of pads in theca. first nutseitig im Abstand von 40 row mm). amounts to at least 8 (44pads the Ab der 2. Reihe reichen Padson auf tongue and grove side respectively der Nutseite, da das Paneel mit derndat gaps of approx. 40 cm). From the 2 Feder in der Nut verriegelt wird und row onwards, 4 pads on the backside somit Halt bekommt. are sufficient as the panel with the The number of pads thegroove first row tongue is bolted intointhe and amounts to at least 8 (4 pads on the thus supported in this way. tongue and grove side respectively at gaps of approx. 40 cm). From the 2nd row onwards, 4 pads on the backside are sufficient as the panel with the tongue is bolted into the groove and thus supported in this way.
Acclimatise the material before installing and store it in the room in which it is to be installed for 48 hours. Tools required Attach running boards as Screw the pads with touch Tools required. Attach running boards as subconstruction. Screw the pads with touch fastener to the lagern. subconstruction fastener to the running boards Acclimatise the material The number of pads in the first row must be at least running boards. 8 (4 pads on the tongue and groove before laying and store it in side respectively at gaps of approx. 40 cm). From the 2nd row onwards, 4 pads on the backside are the room in which it is to be laid for 48 hours. sufficient as the panel with the tongue is bolted into the groove and thus supported in this way.
6. xxxxKlettverschlüsse nutseitig am Fußbodenpaneel ankleben. Die Rückseite der Paneele muss trocken, fett- und staubfrei sein.
7. xxxxPaneele an die Lattung anbringen
8. xxxxAnbringung der Abschlussprofile durch doppelseitiges Klebeband. Profile müssen auf Gehrung gesägt werden.
9. xxxxDie Pads sind nur für die Befestigung des Laminates an der Wand zu benutzen. Keine tragenden Teile. Die Montage von Regalen oder Fernsehern ist nur an der Unterkonstruktion möglich. Hierzu muss die Unterkonstruktion in den Bereichen der Schrauben 8mm dicker sein, damit die Stärke der Klettverschlusspads ausgeglichen wird und die Paneele nicht durchgeschraubt werden. 9. xxxxDie Pads sind nur für die Befestigung des Laminates an der Wand The pads are only be used for theDie attachment the laminate zu benutzen. Keinetotragenden Teile. Montage of von Regalen oder to the wall.ist The pads are Unterkonstruktion not designed for load-bearing. Shelves Fernsehern nur an der möglich. Hierzu mussor die televisions can onlyinbe hung from the this end, Unterkonstruktion den Bereichen dersubconstruction. Schrauben 8mmTo dicker sein, the subconstruction must be 8 mm thicker than the screws are damit die Stärke der Klettverschlusspads ausgeglichen wird und long. die You maynicht not screw through thewerden. panels. Paneele durchgeschraubt
tape. Profiles have to be cut in order to fit at a 90 degree angle.
to the wall. The pads are not designed for load-bearing. Shelves or televisions can only be hung from the subconstruction. To this end, the subconstruction must be 8 mm thicker than the screws are long. You may not screw through the panels.
Attach the adhesive side of the pads to the backside of the floor panel. The rear of the panels must be pads with the touch dry, and free of greaseScrew and dust. Screw pads with the touch fasteners to the subconstruction. Attach fasteners to the subconstruction. the end profiles using double-sided adhesive tape. Profiles have to be cut in order to fit at a 90 degree Attach the adhesive side Attach the end profiles 6. 7. 8. xxxxKlettverschlüsse nut-of xxxxPaneele an die Lattung xxxxAnbringung der the pads theThe backside of are usingattachment double-sided adhesive angle. pads only to be used for the of laminate floors to the wall. The pads are not seitig am to Fußbodenpaneel anbringen Abschlussprofile durch the floor panel. The rear of tape. Profiles have to be cut ankleben. Die Rückseite doppelseitiges Klebeband. Screw pads with the touch designed for load-bearing purposes. ShelvesProfile or televisions can only be hung from the subconstruction. To the Paneele panels must betrocken, dry, and in order to fit at a 90 degree der muss müssen auf Gehrung fasteners to the subconfree of grease and dust. angle. werden. fettund staubfrei sein. gesägt this end, the subconstruction struction. must be 8 mm thicker than the screws are long. You may not screw through Attach the adhesive side of Attach the end profiles the panels. The pads are only to be used for the attachment of the laminate the pads to the backside of using double-sided adhesive the floor panel. The rear of the panels must be dry, and free of grease and dust.
www.facebook.com/KronoOriginal
Kronoflooring GmbH Mühlbacher Straße 1 D-01561 Lampertswalde/Dresden Phone: +49 3522 33-30 Fax: +49 3522 33-399 info@kronoflooring.com
www.krono-original.com