Thermoplastics: Disrupting gear markets

098 PLASTICS, COMPOSITES & ADVANCED MATERIALS

Thermoplastics set to disrupt gear markets once rusted on to metals

Engineering thermoplastic gear, guidance and conveyor component systems have become disruptor technologies in production engineering as Industry 4.0 produces smarter factories and processing plants that are more efficient, hygienic, productive and less wasteful.

Materials such as Wearlon nylon gears, Wearace acetal gears, and Wearex UHMWPE drive components – material types originally introduced to the market to fill niche applications – are more often becoming materials of first choice, according to Cut To Size Plastics. This is happening as machine builders and production engineers seek out materials that will enable their digitally communicating Industry 4.0 systems to function faster, with closer tolerances, less maintenance and down-time, easier washdown and less need for constant lubrication, attracting grit and wear. “Thermoplastic technology is advancing quickly to fill many needs and these materials are extremely tough,” says Laurie Green, Managing Director of Cut To Size Plastics and an Australasian engineering thermoplastics pioneer. “Ultrahigh molecular weight (UHMW) gear racks in use internationally, for example, have shown part lives multiple times longer – sometimes 10 or more times longer – than their metal predecessors. “While most gears were traditionally made from various metals, plastic gear technology is pushing the previous limits of load bearing, torque handling, and gear drive capabilities. As well as being highly suitable for new machinery, these plastic gears and gear racks can be identical in design to their existing metal predecessors, making them directly interchangeable with steel and other OEM and custom metal gears and racks.” Different plastics benefits

Self-lubrication is a key benefit of Wearlon nylon gears, because a constant issue with many metal drive gears is the need for external lubrication. This is a major problem when gears are hard to access or where lubricant will only exacerbate a problem – for example gears that operate in high-dust or gritty environments. “Wearace acetal is a great choice for plastic gears, for example, because the typical objective in such a device is to minimise the friction resulting from contact,” says Green. “Acetal is very slippery (i.e. it has a very low coefficient of friction) and therefore minimal energy is lost in the internal contact interaction between gears. “Wearex ultra-high molecular weight polyethylene (UHMWPE) and other high-performance

Rollers and conveying equipment are areas where thermoplastics often offer advantages.

plastic gears and gear racks offer wear and noise reduction advantages over comparable metal products. UHMWPE is generally looked to when impact resistance is key.” Green’s company has more than 40 years’ experience as a provider of OEM and custom parts that replace metals to increase productivity, decrease down-time and lead to greater revenue for customers while maintaining the specifications required by the equipment, project and application. Cut To Size has worked with industries, extending from food & beverage and primary livestock and crop processing, through to machine building, resources, materials handling, construction and manufacturing to develop hardwearing OEM and easily retrofitted gear components for multiple applications. “Major advances in engineering thermoplastics formulation technologies – and a growing realisation of their unique benefits – mean industry no longer is as firmly rusted on to metals drives as it once was,” Green adds. “Today, the options are far more plentiful and attractive. “While there is no one ideal answer to all applications – whether you are considering metals or thermoplastics – it is important to consider all the options and not automatically revert to old choices that may no longer be optimum for new needs. It could be that old choices are best, but it could be more likely that a cheaper, more durable and better performing alternative has evolved in response to Industry 4.0.” Critical properties

When selecting a plastic material for a specific application, Green says it is important to base the choice on critical properties associated with the task, such as thermal expansion, or the plastic’s ability to change in shape, area and volume in response to temperature changes. The coefficient of thermal expansion is the degree of expansion divided by the change in temperature. The higher the coefficient number, the more change in size. Several major thermoplastic compounds exhibit acceptable thermal expansion performance. Three of the most commonly used are Wearlon nylons, Wearace polyacetal, and UHMWPE. Wearlon nylons are well-suited for use in food contact applications, such as food processing and packaging conveyor systems. The Wearlon family shares major advantages such as high mechanical strength, hardness and stiffness, as well as high mechanical damping capacity. They offer good fatigue and very high wear resistance, with good sliding and emergency running properties. They are suitable for machinery subject to constant moisture and washdown. These properties, along with good machinability, lend them to typical applications such as bearings, guides, chain wheels and guides, bushings and slide and guide plates,

Thermoplastic gears and racks can be directly interchangeable with their metal predecessors.

electromagnetic bogie brakes and ratchet wheels on stapling machines. Being physiologically inert, Wearace is highly suitable for food contact applications in natural form. UHMWPE is a thermoplastic polyethylene featuring extremely high molecular density. loads than nylons, Wearace polyacetal is It is highly durable, with the highest impact eminently suitable and highly cost-efficient resistance of all thermoplastics with great for sliding, guiding and roller elements of abrasion and heat resistance. It’s another materials handling machinery. Typical uses plastic well-suited for food and beverage that benefit from Wearace’s properties industry applications. It has a 130-200 include gear wheels with small moduli, coefficient of thermal expansion and a highcams, heavily loaded bearings and rollers, end temperature of 95 degrees Celsius. bearings and gears with small clearances, “UHMW and other high-performance valve seats, snap fit assemblies, and plastic gears and gear racks offer wear toothed racks, mixer rollers, guide rails, insulating components for electrical and noise reduction advantages over rope pulleys, bearings, tappets, cam discs, engineering and parts which operate comparable metal products,” says Green. gear wheels, transport stars, mixer blades, continuously in water of 60-80 degrees “UHMW materials are generally looked to pump wheels, pinions, curved guides, Celsius. when impact resistance is key.” crane supports and idler and guide rollers. “The most popular property of POM is Cut To Size Plastics offers highWearace polyacetal is a cost-efficient its ease of machining,” adds Green. “It strength, custom-designed and OEM material that offers excellent strength, is also very hard and abrasion-resistant, replacement parts for gears and other stiffness and dimensional stability as well and it is more resistant to creep, which power transmission components used in as wear resistance and easy machining. is the tendency for material to stay bent industrial and commercial applications. Acetal has an 80-120 coefficient of thermal if left under a stress for too long. POM is The company works with customers to expansion, and, as a polyoxymethylene also resistant to chemicals. It is generally find the most cost-effective solutions for (POM) homopolymer, a high-end unaffected by solvents, fuels and lubricants their specific project demands, drawing on temperature of 120 degrees Celsius while found in industrial environments.” extensive local experience complemented the POM copolymer has a temperature Industry-specific examples of Wearace by global supplier expertise for companies range of -40 to 120 degrees Celsius. applications range from scraper blades considering thermoplastic components. AMTIL-ADVERT-MAIN-2020-OUTLINED(FA).pdf 1 17/1/20 10:49 amWhile typically specified for handling lesser on gelatine extruders, buffer blocks on www.cuttosize.com.au