AMX Product Catalogue Supplement 2010 by Johanna Urschel

EXPERIENCE KITS

E N V I R O N M E N TA L C O N T R O L S

C at 5 P resentation S w itc h ers

E nvironment A ccessories

T O U C H PA N E L S

Containing all AMX Products Introduced in 2009

PRODUCT CATALOG Supplement

2009

K E Y PA D S

REMOTE CONTROLS

P resentation I nter faces

U ser I nter face A ccessories

C O N T R O L PA D S

CENTRAL CONTROLLERS

C ontrol S ystem A ccessories

N et w ork C ommunication

LIGHTING CONTROLS

E nvironmental C ontrols

CAMERA CONTROLLERS

S w itc h ers / presentation s w itc h ers

M atrix S w itc h ers

For the complete AMX 2010 Product Catalog, please go to www.amx.com/catalog.

DISTRIBUTED AUDIO

SIMPLIFYING YOUR WORLD Since our inception more than 25 years ago, the vision of AMX has remained the same – to design, manufacture, market, sell, distribute and service the world’s best hardware and software solutions – all designed to simplify the world and the way people interact with technology.

What’s Inside the 2010 Catalog Supplement?

We Welcome Your Feedback

This Supplement includes all of the new products released since

The global AMX Team is committed to providing our end users,

Version 2.0 of the Catalog was published in May 2009. In addition,

dealers and distributors with products, service and support that’s

we have also made many updates to the Catalog to mirror

second to none. We invite you to learn more by visiting www.amx.

changes to AMX.com since that time as well. We invite you to visit

com and should you ever have a question, comment or require

the Table of Contents in this Supplement for all of the sections of

support, please contact us at 800.222.0193 or service@amx.com.

this supplement but of note, new additions and updates include:

We also welcome any and all comments and suggestions for enhancements to the Catalog. Please contact us at catalog@amx.

• New sections include: Environment Controllers,

com to share your thoughts.

Presentation Switchers, Environment Accessories, User Interface Accessories and HDMI • Updated sections include: The Introduction (Sales Support Offices and User Interface Resource sections expanded), EXPerience Kits (includes new Total EXPerience Kits and Distributed Audio Kits), plus additional updates to Distributed Audio, UTP, Fiber, Digital Signage, IPTV and Software sections How Can I Obtain the Full 2010 Catalog and In What Formats Is It Available? To obtain the latest version of the full 2010 Product Catalog with all of the product sections, including everything new and updated, we invite you to visit www.amx.com/catalog, where you can get your Catalog FREE in your choice of two formats: • Downloaded from AMX.com – This option offers the most immediate way to get the new Catalog – just go to AMX. com/catalog and follow the directions to download the full Catalog or select sections. It’s always available 24/7, anytime you need it. • Ordering Your FREE Interactive CD – This option is ideal when Internet Access is limited – just pop in your CD anytime to access sections of the Catalog directly or you can also load the CD onto your PC and access it that way and put away the CD for safekeeping.

C o py ri ght © 2 0 1 0 by A M X L L C All Rights Reserved. Except as permitted under the United States Copyright Law of October 2008, no part of this catalog may be reproduced in any form or by a n y e l e c t ro ni c o r m e c ha ni c a l m e a ns, i ncl udi ng i nf o rm a t i o n st o ra g e a n d r e t r ie va l sy st e m s, w i t ho ut pe rm i ssi o n i n w ri t i ng f ro m t he publ i she r, e x c e pt b y a r e vie w e r w ho m a y quo t e bri e f pa ssa ge s i n a re v i e w. L i m i t o f L i a b i l i t y / D i s cl a i m e r o f Wa r r a n t y. W h i l e A M X h a s u s e d o u r b e s t e f f o r t s i n pre pa ri ng t hi s c a t a l o g, w e m a k e no re pre se nt a t i o ns o r w a rra nt i e s w it h r e s p e ct t o t he a c c ura cy o r c o m pl e t e ne ss o f t he c o nt e nt s o f t hi s bo o k a nd s p e cif ica lly d i s cl a i m a n y i m p l i e d w a r r a n t i e s o f m e r c h a n t a b i l i t y o r f i t n e s s f o r a p a r t i c u l a r purpo se . No w a rra nt y m a y be c re a t e d o r e x t e nde d by t hi s w ri t t e n m a t e r ia l. The a dv i c e a nd st ra t e gi e s c o nt a i ne d he re i n m a y no t be sui t a bl e f or yo u r s it u a t io n . Yo u sho ul d c o nsul t w i t h a pro f e ssi o na l w he re a ppro pri a t e . A M X i s n o t lia b le f o r a n y l o s s o f p r o f i t o r a n y o t h e r c o m m e r c i a l d a m a g e s , i n cl u d i n g b ut n o t l i m i t e d t o spe c i a l , i nc i de nt a l , c o nse que nt i a l o r o t he r da m a ge s.

P r i m a ry C o n ta c t s PRODUCT CATALOG

PRIMARY CONTACTS – CHARTING YOUR PATH Should you require any assistance, we welcome your questions and comments via phone, email or mail to our worldwide headquarters or our direct sales and support offices (see page 2).

AMX Worldwide Headquarters

AMX University

3000 Research Drive, Richardson, TX 75082

469.624.7664

service@amx.com

Email: TrainingHelp@amx.com

800.222.0193

Contact information: www.amx.com/contactamx/training.asp More details: www.amx.com/training/

Phone Prompts

Global Course Calendars: www.amx.com/training/#calendars

When calling our Headquarters, you may expedite your call by selecting from one of the following prompts so that we may route

Technical Support

you to the proper person to assist with your issue.

800.222.0192, option 8 Submit email at: www.amx.com/contactamx/feedback.asp?tech=1

PRESS 0 – To Speak with a Company Receptionist

1 – Sales

More info: www.amx.com/techcenter/

2 – Order Status

Public / Media Relations

3 – Product Info, File Downloads or AMX.com

469.624.6579

4 – Help with System Design or Status of Programming Job

Email: pr@amx.com

5 – RMA or Repair Status

6 – Accounts Receivable

Consultant Services

8 – Technical Support

800.652.6965

9 – To Dial By Name or Extension

Email: quotes@amx.com More info: www.amx.com/contactamx/consultant.asp

Global Customer Service Within the US: 800.222.0193, option 2

Literature Requests

Outside the US: +1.469.624.8000, option 2

www.amx.com/contactamx/info_request.asp

Email: service@amx.com More info: www.amx.com/contactamx/CustomerService.asp Sales and Support (Within the US) 800.222.0193 469.624.8000 Fax: +1.469.624.7152 Email: service@amx.com More info: www.amx.com/contactamx/USA.asp Sales and Support (Outside the US) +1.469.624.7400 Fax: +1.469.624.7155

Vertical Markets www.amx.com/contactamx/vertical_markets.asp Repair Processing www.amx.com/contactamx/RegionalRepair.asp Comments & Suggestions www.amx.com/contactamx/feedback.asp Programming (Listing of Valued Independent Programmers) www.amx.com/contactamx/vip.asp

Email: international@amx.com More info: www.amx.com/contactamx/International.asp Technical Sales Design 800.222.0193, option 4 Fax: +1.469.624.7152 Email: techsales@amx.com

3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 © January 2010 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

S ALE S / S UPPORT O F F I C E S PRODUCT CATALOG

SALES/SUPPORT OFFICES – LEADING YOUR WAY For sales and support of all AMX hardware and software solutions, we invite you to contact any of our offices throughout the world to speak with or schedule an appointment with one of our sales professionals. We look forward to meeting with you to learn more about how we can assist in simplifying your world.

US Regional Offices AMX Midwest 220 West 22nd Street Green Brook Executive Center, Suite 225 Lombard, IL 60148 630.418.7723

Cardone, Solomon & Associates (New York, New Jersey) 10 Devon Place Northport, NY 11768 631.261.9025

Muckle Sales (Alaska, Oregon)) 10220 SW Nimbus Avenue, Unit K-1 Portland, OR 97223 503.620.0444

AMX Northeast 2325 Maryland Road, Ste 150 Willow Grove, PA 19090 800.462.6946

Entertainment Media & Marketing (South Carolina, Alabama, Georgia, Mississippi, Tennessee) 6090 McDonough Drive, Suite H Norcross, GA 30093 770.300.9179

(Washington) 13720 246th Avenue SE Issaquah, WA 98027 425.391.3474

AMX Southwest / AMX West 3187 Redhill, Suite 150 Costa Mesa, CA 92626 800.562.6956 AMX Southeast 3350 Buschwood Park Drive, Suite 160 Tampa, FL 33618 800.274.5666 AMX South Central 3000 Research Drive Richardson, TX 75082 800.222.0193 AMX South PMB 202, #116 2295 Towne Lake Pkwy Woodstock, GA 30189 678.493.9095

Hill Residential (Delaware, South New Jersey, Pennsylvania, West Virginia) 2239 Ayreshire Drive Lansdale, PA 19446 610.222.9991 (Washington D.C., Maryland, North Virginia) 6315 Hillside Court, Suite J Columbia, MD 21046 410.309.4900 (North Carolina, Central Virginia) 3505 Glen Oaks Court Clemmons, NC 27012 336.766.2066 JP Sales Group (Upstate NY) 1108 Union Street Schenectady, NY 12308 518.377.5692

Nu-Way Technologies (Alabama, Mississippi, Tennessee) 110 South Ridge Road Andalusia, AL 36420 334.222.8950 New Resource (Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, Vermont) 28 Mt. Blue Street Norwell, MA 02061 781.771.2901 PMP Marketing (Idaho, Alaska, Montana, Oregon, Washington, Colorado, New Mexico, Utah, Wyoming) 8191 South Park Lane Suite 204 Littleton, CO 80120 303.972.9199

US S A L ES A ND S U PPORT 8 0 0 . 2 2 2 . 0 1 9 3 • I NTER NATI ONA L S A L ES A ND S U PPORT +1 . 4 6 9 . 6 2 4 . 74 0 0 • www.a m x.c o m © January 2010 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.

S ALE S / S UPPORT O F F I C E S PRODUCT CATALOG

Sales Support Offices Outside the US

AFRICA North Africa (Algeria, Morocco, Tunisia) AMX France 144 Avenue Charles de Gaulle 92200 Neuilly Sur Seine +33.6.85.40.91.82 South Africa (Republic of South Africa, Angola, Botswana, Kenya, Lesotho, Malawi, Mozambique, Namibia, Swaziland, Tanzania, Zambia, Zimbabwe) Peripheral Vision CC Unit #2 90 Silverstone Cres. Kyalami Business Park 1684 Kyalami, Johannesburg +27.11.840.0860

ASIA & THE PACIFIC RIM Australia and New Zealand AMX Australia 5 Commercial Drive Southport, Queensland 4215 Australia +61.7.5531.3103 AMX New Zealand B5, 396 Rosedale Road Albany, Auckland, New Zealand +64.9.415.2257 North Asia (China, Hong Kong, Korea, Taiwan) AMX Asia Limited (China - Beijing) Room 1030, Section C, Chao Wai SOHO No. 6B Chaowai Street Beijing 100020, China +86.10.5900.2881

AMX Asia Limited (China - GuangZhou) Unit 1701 Guangzhou International Electronic Tower No. 403 Huanshi Road East, Guangzhou 510095, PRC +86.20.3758.2820 AMX Asia Limited (China - Shanghai) Unit 2009 FeiDiao International Plaza No. 1065 Zhao Jia Bang Road Xu Hui District, Shanghai 200030, PRC +86.21.5301.7233 AMX Asia Limited (Hong Kong and Macau Region) Unit 1206-09 12/F., Two Chinachem Exchange Square 338 King’s Road North Point, Hong Kong +852.3422.8732/42 AMX Asia Limited (Korea) #402 Yoo-won Bldg 1060-17 Namhyun-dong Kwanak-gu, Seoul, 151-800 Korea +82.2.523.0771

Japan Electori Co. LTD. Mondo Bldg., 2-19-6 Kaname-Cho Toshima-Ku, Tokyo, Japan 171 0043 +81.3.3530.6190

CANADA AMX Canada 237 Labrosse, Suite 200 Pointe-Claire, Quebec H9R IA3 +1.514.695.4883

AMX Asia Limited (Taiwan) 5D25, 5/F, No.5, Sec 5, Hsin Yi Road Taipei 110, Taiwan +886.2.2729.5180 Southeast Asia (Singapore, Cambodia, Indonesia, Laos, Malaysia, Myanmar, Philippines, Thailand, Vietnam) AMX Asia Pacific 13 International Business Park LabOne Building, Units 04-01 and 04-02 Singapore 609932 +65.6846.7960

India AMX India Evoma Business Park Old Madras Road KR Puram, Bangalore 560 049 +91.80.4190.3721

S ALE S / S UPPORT O F F I C E S PRODUCT CATALOG

EUROPE Belgium, Luxembourg AMX Belgium Boerenkrijglaan, 96A B-2260 Westerlo, Belgium +32.14.54.2763 France AMX France 144 Avenue Charles de Gaulle 92200 Neuilly Sur Seine +33.6.85.40.91.82 Germany, Austria, Belarus, Bosnia, Bulgaria, Croatia, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia, Slovenia, Ukraine AMX GmbH Behrstrasse 100, 73240 Wendlingen, Germany +49.7024.4080.0 www.amx.de Greece Adamco 432, Konstantinoupoleos Ave. 136 71 Acharnes, Greece +30.210.644.4512 Italy Intermark Sistemi S.R.L. Via A. Litta Modignani 37 00144 Rome, Italy +39.06.520.5835 The Netherlands AMX Netherlands Auster Road Clifton Moor, York YO30 4GD England +31.316.224.884

Russia AMX Russia Krasnopresnenskaya nab. 18, block C, office 444 Moscow, Russia, 123317 +7495.651.6684 Spain, Portugal AMX Iberia Parque Industrial Pisa C/Comercio Edif Forum Modulo 20 41927 Mairena Del Aljarafe Sevilla, Spain +34.954.189.006 Switzerland AROCOM AG Pfeffingerstrasse 19 CH-4153 Reinach-Basel +41.61.377.8797 Turkey SF-RKD Elektronik A.S. Esra sok. Kucuk Camlik Sitesi No: 23B 34340 Ulus - Istanbul Turkey +90.212.257.7500 United Kingdom (England, Northern Ireland, Scotland, Wales) AMX Europe Auster Road Clifton Moor, York YO30 4GD England +44.1.904.343.100 AMX London 6th Floor Salisbury House London Wall, London United Kingdom, EC2M 5QQ +44.1.904.343.100

Norway, Sweden, Denmark, Finland AMX Scandinavia Stora Avagen 21 S-436 34 Askim Sweden +46.0.31.761.0333

MEXICO AMX Soluciones Tecnologicas, S.A. de C.V. d/b/a AMX Mexico Av. Mariano Escobedo 510 Piso 12, Privado 15 Col. Anzures, Deleg. Miguel Hidalgo Mexico DF, CP11590 +52.55.2881.8498

MIDDLE EAST (Lebanon, United Arab Emirates, Kingdom of Saudi Arabia, Kuwait, Qatar,Oman, Yemen, Bahrain, Jordan, Egypt, Pakistan) AMX Middle East (AMX-me) Dubai Office East Wing 4A, Office 624 Dubai Airport Free Zone Dubai, UAE +971.4.204.5690 AMX Lebanon Lebanon Office Jounieh, Imm. Skaf Jounieh, Lebanon PO Box 1184 Jounieh +961.9.901120

AM X R e s o u r c e s PRODUCT CATALOG

AMX RESOURCES – User Interface Design SUPPORT

Forums to enter the Modpedia or User Interface forums to find or post device modules and user interfaces. • Touch Panel Tools: Includes AMX Development Tools, Standard Set Up Pages, Wireless Site Survey, and more • Design Guides: Download the AMX and InfoComm guides for designing user interfaces VIP Resource Program To showcase the UI design talents of the AMX VIP group, the VIP Resource section of the UI Resource Center allows people to see samples of our VIPs’ programming and interface design work and the ability to contact them for assistance. What Are AMX VIPs? Within the AMX community of independent programming UI Resource Center The user interface is undoubtedly the single most essential part of the control system and to ensure that AMX Integrators have the tools needed to create spectacular user interface designs, the UI Resource Center, an AMX.com Spotlight Site is available at www.amx.com/ui and is dedicated solely to support UI design and creation. What Resources Are Available? • Browse/Search UI Resources: Includes UI Designs, Device Pages, Graphic Elements, Widgets,Event Demo Files, VisualArchitect Templates and G4 PanelBuilder Templates • Modero Value Add Products: UI support for ComputerControl, iWeather, PictureFrame, TakeNote, Widgets & More • Apple Integration Tools: Supports a variety of Apple- associated devices such as Virtual Keypad, NXV Virtual Touch Panel Integration, as well as the Sonance iPort and Apple TV Modules • InConcert Resource Center: Takes you directly to the InConcert site to download InConcert and Device Discovery modules

companies, several firms approached AMX about developing a program tailored to support the delivery of custom control programming solutions to AMX end users. The VIP program is designed to acknowledge, support and reward those companies whose core competencies lie in the design and delivery of custom control solutions on the AMX technology platform. The program was established to support “the best of the best” of independent companies with AMX control system programming skills. Membership is supported through regional AMX Sales sponsorship and nomination of candidates. There are a number of business and industry criteria that candidates must meet in order to become members of this exciting program. Candidates for the program cannot be associated with an AMX manufacturer representative firm or be an active AMX Dealer. The program exists to support and enable those companies whose core business acumen is that of custom control programming services. Some of the membership criteria and benefits follow.

• Modpedia and AMX UI Forums: Takes you directly to the AMX

AM X R e s o u r c e s PRODUCT CATALOG

Membership Criteria Highlights • Executed binding AMX agreement with non-compete and NDA

Das h b o ar d fo r C o n t ro ls G u id e A helpful guide in assisting in t he c re a t i o n o f Pr o - AV t o u ch panel interfaces to promote i nt ui t i v e e nd-use r o p e r a t io n o f p r o f e s s i o n a l l y i n s t a l l e d AV sy st e m s.

• ACE Certified staff programmer(s) and agreement to maintain annual recertification and training • Certification by (at least one) AV Industry Trade Organization • Annual membership fee required • Pledge to be a good business partner and citizen • Adequate insurance and certified compliance to state and local government and union laws • Maintain a reputable company with reputable individuals and demonstrable work history within AV and AMX control

Technical Sales Design The AMX Technical Sales Design Team analyzes customer

Membership Has Its Privileges In addition to reigning supreme in the AMX programming community, those individuals who are certified as VIPs will also enjoy the following privileges: • Endorsement as a VIP in the UI Resource Center on AMX.com • Rapid access to senior level technical support

requirements, designs systems, and configures hardware and software solutions. The design process involves the act of deciphering and understanding audio-visual-environmental information presented in varying degrees of accuracy and finality from which the solution proposal is delivered. Technical Sales Design focuses on providing sales support, training deployment,

• Corporate sponsored regional events

and solutions development. To contact Technical Sales for

• Exclusive AMX.com download privileges

assistance, call: 800.222.0193, option 4.

• Standard/advanced training at no cost • Hardware/software beta program eligibility

When should I engage Technical Sales? • Presented an opportunity to provide a total solution based on

Learn More And Become a VIP

requirements

If you are an independent programmer or programming firm and are interested in learning more about the VIP program please contact the local AMX Sales office in your territory.

• Not sure if a particular product offered can accomplish what the client is requesting • Training required for AMX solutions (Web, phone, or travel) • Need a quote based on client, dealer, consultant, or

AMX User Interface Style Guide

architectural specifications

The AMX User Interface Style Guide assists in the development and design of user interfaces that are displayed on AMX Touch Panels in your control system projects. Developing a theme, setting the direction and elements of design are all style guidelines covered in this essential design resource. Download it at: www.amx.com/assets/literature/StyleGuide.pdf. ADDED SUPPORT: THE INFOCOMM USER INFERFACE GUIDE An additional, indisposable user interface design resource is InfoComm’s Dashboard for Controls Guide, which includes many more guidelines to designing great interfaces: www.infocomm. org/fileStore/Dashboard_for_Controls_Design_Guide.pdf.

Ta b l e o f C o n t e n t s PRODUCT CATALOG

TABLE OF CONTENTS – FINDING YOUR WAY INTRODUCTION

FIBER

AMX Simplify Your World............................................................Inside Cover

Transmitter and Receiver Modules......................................................84 – 87

Primary Contacts............................................................................................1 Sales/Support Offices..............................................................................2 – 4

DISTRIBUTION AMPLIFIERS

User Interface Design Support................................................................5 – 6

S–Video Distribution Amplifiers...................................................................88

Table of Contents...........................................................................................7

DIGITAL SIGNAGE ENVIRONMENT CONTROLLERS

Custom Configuration Signage...........................................................89 – 90

Total Environment Controllers.............................................................10 – 13

Signage Software Licenses...........................................................................91

Total Environment Controller EXPerience Kits....................................14 – 15 Accessories...........................................................................................16 – 17

IPTV Vision2 IPTV Packages..........................................................................92 – 95

CAT5 PRESENTATION SWITCHERS

Vision2 IPTV Package Add–Ons...........................................................96 – 99

Cat5 Presentation Switchers................................................................20 – 22 Cat 5 Presentation Switcher EXPerience Kits.....................................23 – 24

SOFTWARE

Accessories...........................................................................................25 – 26

Resource Management Suite Interface Modules..................................... 100 Resource Management Suite Room Kits.................................................. 101

ENVIRONMENT ACCESSORIES HydraPort Retractable Connection Ports............................................30 – 31 HydraPort Retractable Connection Modules......................................32 – 36 Wallplate Transmitters..........................................................................37 – 45

TOUCH PANELS Wired Series Smaller Screens (4.3”)........................................................................46 – 47 Virtual Touch Panels......................................................................................48

USER INTERFACE ACCESSORIES Modero Touch Panel Accessories................................................................49 Keypad Accessories.....................................................................................50 Remote Accessories.............................................................................51 – 52 Novara Keypad Accessories........................................................................53

MATRIX SWITCHERS Pre –Engineered (1 video style; 1 audio style or both, analog and digital signals) Medium (systems are 2RU to 6RU; inputs from 4 to 36; outputs from 4 to 24; analog and digital signals)..............................54 – 56 Modular Very Large with Integrated Fiber Technology (systems are typically 16RU; inputs from 16 to 144; outputs from 16 to 144).............57 – 62

DISTRIBUTED AUDIO Tango Distributed Audio Kits...............................................................63 – 64 AMXhome Dealer Showroom Display Kits..................................................65

HDMI HDMI Matrix Switchers, Kits and Receivers........................................68 – 73 HDMI–UTPro Repeaters...............................................................................73

UTP Multi–Format Distribution Hubs and Hub/Receiver Kits............................74 Transmitter and Receiver Modules......................................................75 – 80 Accessories...........................................................................................81 – 82

INTRO D U C TION EN V IRONMENT C ONTROLLER S

Talk About Enovation A Single Solution that Ensures Everything is Controlled – Everything is Covered Total Environment Control combines all of the components needed to control/automate any environment into a simple, flexible, comprehensive solution including control, multi-format inputs, video switching, transcoding and scaling, local and remote distribution, plus audio mixing, and amplification - all in a single box. By combining disparate technologies into a single enclosure, the end users pays a fraction of the cost associated with buying separate hardware to accomplish the same solution.

SYSTEM DIAGRAM

INTRO D U C TION EN V IRONMENT C ONTROLLER S

Spotlight on Eno va Visit the Enova Spotlight S i t e a t w w w.amx .com/ e no va t o learn more about this inno v a t i v e philosophy on ho w you thi n k a b o ut te ch no l o g y.

EN V IRONMENT C ONTROLLER S

3 | 4 | 4 | 4 S e ri a l

DVX-2100HD

R e l ay

D ig it a l I/ O

Total Environment Controller DVX-2100HD-SP

2 x 25W Amp

(FG1905-01)

DVX-2100HD-T

75W, 70V / 100V Amp

(FG1905-02)

EXPerience Kit(s) Available, see page 14-15

OVERVIEW The DVX-2100HD Enova Total Environment Controller combines

furnishings, surfaces and functionality requirements in every room.

all of the components you need to control/automate any

There’s also a stereo line level output with its own mixing and

environment into a simple, flexible, comprehensive solution

equalization settings.

including control, multi-format inputs, video switching,

• Superior Integrated Control – Includes the same quality and

transcoding and scaling, local and remote distribution, plus audio

reliability you have come to demand with the equivalent of a

mixing, and amplification - all in a single box.

NetLinx NI-2100 central controller. The DVX also includes a front control panel for an added level of convenience. The DVX

COMMON APPLICATION

comes complete with our standard RS-232, IR, digital I/O and

The DVX-2100HD is an ideal presentation solution when used to

relay control ports for control over environment and third-party

simplify A/V control and distribution in sophisticated presentation environments and conference rooms, including those supporting

equipment. • Simplifies Wiring and Installation – Integrating all of this into

audio and video conferencing. It also fits well in classrooms and

a single box has obvious advantages over the connectivity

auditoriums that need multiple displays, or video previewing.

challenges associated with wiring up as many as a dozen separate devices, not including source devices.

FEATURES • SmartScale™ Up to Higher Resolutions – The DVX can automatically communicate with newly connected display devices to determine native resolutions and can up convert any input signals beyond HD resolutions up to 1920x1200. • Commands Signal Management Flexibility – Over 200 input signal combinations of DVI , RGB, Component, S-Video, and Composite. Don’t worry about having too many of one signal

• Offers Remote Connectivity via Cat5 – Connect up to two remote A/V sources over Cat5/5e/6 up to 50 meters (150 feet) away using UDM transport technology also found in AMX Endeleo products. And take advantage of the HydraPort retractable cable connection port plus the UPX universal transmitter wallplates to get the job done with class. ONLINE www.amx.com/products/DVX-2100HD.asp

style or not enough of another – just grab an adapter cable and go. Digital never looked so good. • Simplifies Setup & Saves Time and Money – The DVX-2100HD is a total environment solution that eliminates the need for separate devices, thus reducing connectivity time, integration

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ DVX -2 1 0 0 HD. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

time, hardware installation time, and that all reduces your overall cost. • Maximizes Video Productivity – Built-in transcoding and scaling automatically optimizes the management of all your video input

S P OT LI GHT: ENOVA A ne w, i nno v a t i v e phi l o so phy o n ho w y o u t hi nk a b o u t A / V t e ch n o lo g y: Eno v a i s pa rt o f a n e v o l ut i o n t o c o l l a bo ra t e , c o m m u n ica t e a n d e d u ca t e usi ng AV t e c hno l o g y. V i si t w w w. am x . co m /en o va/ t o le a r n m o r e .

and output challenges. • Provides Quality Audio Processing – Built-in audio mixing and amplification that outputs two channels at 25 Watts each into 8-ohms or 75 Watts at 70V or 100V after passing through a mixer and an integrated 5-band* equalizer to accommodate the size,

D V X - 2 1 0 0 H D EN V IRONMENT C ONTROLLER S

A CLOSER LOOK

LC D Di s p l ay

Status L ED Output LED LINK /AC T LE D

Input L ED

M a cros push buttons

S er i al Po r t LEDs

Input Sele ct pus hbuttons

Rel ay LEDs

M I C S el ect p u s h b u tto n s

I R/S er i al LEDs

I /O LEDs

Vi d eo M en u

Vi d eo M u te

Au d i o M en u

Au d i o M u te

P ROGRAM (US B) Po r t

ID Pushbutton Ethernet 10/100 Po r t/LE D s A X L in k Po rt / L E D

C ONFI G DI P S w i tch R S2 3 2 /4 2 2 /4 8 5 ( po rt s 1 -3 )

RELAYS (por t 4)

MISC Inputs (1-2)

A u d i o Input s ( 1 -4 )

I /O Po r t (p o r t 9 )

MISC I n p u ts (5 -6 )

I R/S ERI AL (Po r ts 5 -8 )

Au d i o OUT P UT S

Navig a t io n a l Bu tt o n s

Vi d eo Ou tp u ts (V GA & DV I -1 )

UDM Ou tp u t

Po w er C o n n ecto r /S w i tch

Vi deo Inputs ( DVI-1 , 1 -4)

D V X - 2 1 0 0 H D EN V IRONMENT C ONTROLLER S

SPECIFICATIONS DIMENSIONS (HWD)

110-240V, 47/63 Hz, 3A maximum AC supply

• Input impedance: >10k ohms unbalanced, >20k ohms balanced, DC coupled • UDM A/V Inputs: 2 RJ-45 inputs for connecting to UDM distribution hubs, UPX Universal Transmitter Wallplates, or HPX A/V to Cat5 modules.

WEIGHT:

) • Microphone Inputs: 2 3.5mm Phoenix (3-pin) connectors capable of balanced

3 1/2” x 17” x 14 1/4” (8.89 cm x 43.18 cm x 36.2 cm) POWER

14.7 lb (6.67 kg) MEMORY

• 64 MB SDRAM • 1 MB Non-volatile (NV) SRAM FLASH

256 MB AMPLIFIER

• DVX-2100HD-SP: 2 x 25W into 8 Ohms Class D stereo amplifier • DVX-2100HD-T: 75W, 70V/100V mono amplifier ENCLOSURE

Metal with black matte finish FRONT PANEL COMPONENTS

• Link/Activity LED Indicator: Green LED blinks when the Ethernet cables are connected and terminated correctly. Also blinks when receiving Ethernet data packets. • Status LED Indicator: Green LED blinks to indicate that the system is programmed and communicating properly. • Output LED Indicator: Red LED blinks when the Controller transmits data, sets channels On/Off, sends data strings, etc. Also blinks when it receives data from button pushes, strings, commands, channel levels, etc. • Input LED Indicator: Yellow LED blinks when the Controller transmits data, sets channels On/Off, sends data strings, etc. Also blinks when it receives data from button pushes, strings, commands, channel levels, etc. • R S-232/422/485 LED Indicators: 3 sets of red and yellow LEDs light to indicate the rear DB9 Ports 1 - 3 are transmitting or receiving RS-232, 422, or 485 data. • Relay LED Indicators: 4 red LEDs light to indicate the rear relay channels 1-4 are active (closed). • IR/Serial LED Indicators: 4 red LEDs light to indicate the rear IR/Serial channels 1-4 are transmitting control data. • I /O LED Indicators: 4 yellow LEDs light when the rear I/O channels 1-4 are active. • Macro buttons: 4 back-lit buttons for macro functions. The macro functions can be programmed via NetLinx code. • Input Select buttons: 6 source selection tactile buttons. Successive pressings of the same button toggle the associated input as the primary output. • Microphone Select buttons: 2 back-lit buttons for selecting a microphone. The button lights yellow when selected. • LCD display: Liquid crystal display containing 2 lines with 20 characters per line. • Audio Menu button: 1 button for opening the audio options on the LCD display. • Video Menu button: 1 button for opening the video options on the LCD display. • Navigational buttons: 4 directional buttons for navigating through the audio and video options on the LCD display. • Video Mute button: 1 button for enabling/disabling the selected video output display. • Audio Mute button: 1 button for turning off the audio for the selected input. REAR PANEL COMPONENTS

• Multi-Format Video Inputs: 4 DVI-I connectors for devices such as PCs, DVD players, satellite receivers, and video conference systems • Balanced Audio Inputs: 4 3.5mm Phoenix (5-pin) connectors • Nominal input level: +4 dBu (1.228 Vrms) balanced or -10 dBV (0.3162 Vrms) unbalanced

or unbalanced audio and Phantom Power. • Multi-Format Video Output: 1 DVI-I connector, 1 VGA connector • Line Level Audio Output: 1 3.5mm Phoenix (5-pin) connector for fixed, balanced, or unbalanced stereo output. • Amplified Audio Output: 1 5mm Phoenix (4-pin) connector for variable output for volume control. • UDM A/V Output: 1 RJ-45 connector for UDM output connections. • RS-232/422/485 Control Ports: 3 RS-232/422/485 control ports using DB9 (male) connectors with XON/XOFF (transmit on/transmit off), CTS/RTS (clear to send/ready to send), and 300-115,200 baud. • Relay Ports: - 4-channel single-pole single-throw relay ports - Each relay is independently controlled. - Supports up to 4 independent external relay devices - Channel range = 1-4 - Each relay can switch up to 24 VDC or 28 VAC @ 1 A - One 8-pin 3.5 mm mini-Phoenix (female) connectors provide relay termination • I /O Ports: 4-channel binary I/O port for contact closure with each input being capable of voltage sensing. Input format is software selectable with interactive power sensing for IR ports. • IR/Serial Ports: 4 IR/Serial control ports support high-frequency carriers of up to 1.142 MHz with each output being capable of two electrical formats IR or Serial. • 4 IR/Serial data signals can be generated simultaneously. • IR ports support data mode (at limited baud rates and wiring distances). • Program Port: USB connector that supports USB communications to a PC for system configuration and diagnostics. • Ethernet Port: 1 RJ-45 connector provides TCP/IP communication. This is an Auto MDI/MDI-X enabled port, which allows you to use either straight-through or crossover Ethernet cables. The Ethernet Port LEDs show communication activity, connection status, speeds, and mode information: • SPD (speed) - Yellow LED turns On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps. • L /A (link/activity) - Green LED turns On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets. • A xLink Port: 1 4-pin 3.5 mm mini-Phoenix (male) connector that provides data and power to external control devices. Green AxLink LED indicates the state of the AxLink port. • Power Connector: 1 connector, 100-240V AC, 47-63Hz, 3A maximum • DIP Switch: 1 4-position Master Configuration DIP Switch • Pushbutton: 1 black pushbutton to set the NetLinx ID of the device side, switcher, and RX02 devices SUPPORTED VIDEO RESOLUTIONS

Up to 1920x1200 @ 60 Hz CERTIFICATIONS

FCC Part 15 Class B, CE, IEC-60065 for “CB Scheme”, RoHS ENVIRONMENTAL

• Operating Temperature: 0º C to 40º C (32º F to 104º F) • Operating Humidity: 5% to 85% RH • Storage Temperature: -10º C to 70º C (14º F to 158º F) INCLUDED ACCESSORIES

• 2 CC-NIRC, IR Emitter w/3.5mm Phoenix (FG10-000-11) • 2 CC-DVIM-VGAF, DVI to VGA Adapter (FG10-2170-13)

D V X - 2 1 0 0 H D EN V IRONMENT C ONTROLLER S

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

CC-DVI-5BNCM CC-DVI-RCA3M CC-DVIM-VGAF CC-DVI-SVID CC-3.5ST5-RCA2F UDM-RX02N UPX-CS+A-US UPX-CS+A-UK UPX-CS+A-EU UPX-RGB+A-US UPX-RGB+A-UK UPX-RGB+A-EU UPX-CN+A-US UPX-CN+A-UK UPX-CN+A-EU

DVI to 5 BNC Male Cable DVI to 3 RCA Male Cable DVI to HD-15 Female Adapter DVI to S-Video Cable 5-pin 3.5mm Phoenix to 2 RCA Female Cable Multi-Format Receiver with Native NetLinx Control Composite Universal Transmitter Wallplate (US) Composite Universal Transmitter Wallplate (UK) Composite Universal Transmitter Wallplate (EU) RGB Universal Transmitter Wallplate (US) RGB Universal Transmitter Wallplate (UK) RGB Universal Transmitter Wallplate (EU) Component Universal Transmitter Wallplate (US) Component Universal Transmitter Wallplate (UK) Component Universal Transmitter Wallplate (EU)

(FG10-2170-08) (FG10-2170-09) (FG10-2170-13) (FG10-2170-10) (FG10-003-20) (FG1402-20) (FG1402-50-SW/SB/SA) (FG1402-50-KW/KB/KA) (FG1402-50-EW/EB/EA) (FG1402-51-SW/SB/SA) (FG1402-51-KW/KB/KA) (FG1402-51-EW/EB/EA) (FG1402-52-SW/SB/SA) (FG1402-52-KW/KB/KA) (FG1402-52-EW/EB/EA)

www.amx.com/products/CC-DVI-5BNCM.asp www.amx.com/products/CC-DVI-RCA3M.asp www.amx.com/products/CC-DVIM-VGAF.asp www.amx.com/products/CC-DVI-SVID.asp www.amx.com/products/CC-3.5ST5-RCA2F.asp www.amx.com/products/UDM-RX02N.asp www.amx.com/products/UPX-CSA-US.asp www.amx.com/products/UPX-CSA-UK.asp www.amx.com/products/UPX-CSA-EU.asp www.amx.com/products/UPX-RGBA-US.asp www.amx.com/products/UPX-RGBA-UK.asp www.amx.com/products/UPX-RGBA-EU.asp www.amx.com/products/UPX-CNA-US.asp www.amx.com/products/UPX-CNA-UK.asp www.amx.com/products/UPX-CNA-EU.asp

16 16 17 17 16 527 37 38 39 40 41 42 43 44 45

CATALOG

EN V IRONMENT C ONTROLLER S

EXP-TOTAL-DVX-2100HD-DC Enova Total EXPerience DVX-2100HD Drop Ceiling Kit Drop Ceiling Kit (US Mount Wallplates) (FG1905-10K) Drop Ceiling Kit (UK Mount Wallplates) (FG1905-20K) Drop Ceiling Kit (EU Mount Wallplates) (FG1905-30K)

INCLUDES • 1 - DVX-2100HD: Enova Environment Controller • 1 - UDM-RX02N: Cat5 Multi-Format Receiver • 2 - UPX-RGB+A-US/UK/EU-W: UPX Universal Transmitter Wallplates with RGB Video/Stereo Audio, White (Kits Available In US, UK or EU Mount) • 1 - AC-PMNT-DC: Chief® Drop Ceiling Kit • 1 - SPK-IC-400-T: Klipsch® In-Ceiling, Plenum-rated, Loud Speaker Pair • 2 - CC-DVI-RCA3M, DVI to 3 RCA Male Cable 6’ • 2 - CC-3.5ST5-RCA2F,5-pin 3.5mm Phoenix to 2 RCA female cable • 1 - Ethernet Cable • 1 - USB Programming Cable ONLINE www.amx.com/products/EXP-TOTAL-DVX-2100HD-DC.asp

EN V IRONMENT C ONTROLLER S

EXP-TOTAL-DVX-2100HD-SM Enova Total EXPerience DVX-2100HD Surface Mount Kit Surface Mount Kit (US Mount Wallplates) (FG1905-40K) Surface Mount Kit (UK Mount Wallplates) (FG1905-50K) Surface Mount Kit (EU Mount Wallplates) (FG1905-60K)

INCLUDES • 1 - DVX-2100HD: Enova Environment Controller • 1 - UDM-RX02N: Cat5 Multi-Format Receiver • 2 - UPX-RGB+A-US/UK/EU-W: UPX Universal Transmitter Wallplates with RGB Video/Stereo Audio, White (Kits Available In US, UK or EU Mount) • 1 - AC-PMNT-SM: Chief® Surface Mount Kit • 1 - SPK-W6.5-SMK, 6.5” Wall Speaker Pair with On-Wall Mounting Boxes • 2 - CC-DVI-RCA3M, DVI to 3 RCA Male Cable 6’ • 2 - CC-3.5ST5-RCA2F,5-pin 3.5mm Phoenix to 2 RCA female cable • 1 - Ethernet Cable • 1 - USB Programming Cable ONLINE www.amx.com/products/EXP-TOTAL-DVX-2100HD-SM.asp

EN V IRONMENT C ONTROLLER S

CC-DVI-5BNCM DVI to 5 BNC Male Cable (FG10-2170-08)

OVERVIEW The CC-DVI-5BNC is a 6 ft. cable used to connect BNC Male to a DVI input. ONLINE www.amx.com/products/CC-DVI-5BNCM.asp

CC-DVI-RCA3M DVI to 3 RCA Male Cable (FG10-2170-09)

OVERVIEW The CC-DVI-RCA3M is a 6 ft. cable used to connect 3 RCA Male to a DVI input. ONLINE www.amx.com/products/CC-DVI-RCA3M.asp

CC-3.5ST5-RCA2F 5-pin 3.5mm Phoenix to 2 RCA Female Cable (FG10-003-20) OVERVIEW The CC-3.5ST5-RCA2F is a 6 inch cable used to connect 2 RCA Female to a 5-pin mini-Phoenix connector. ONLINE www.amx.com/products/CC-3.5ST5-RCA2F.asp

EN V IRONMENT C ONTROLLER S

CC-DVIM-VGAF DVI to HD-15 Female Adapter (FG10-2170-13)

OVERVIEW The CC-DVIM-VGAF is an adapter used to convert VGA Female to a DVI Male. ONLINE www.amx.com/products/CC-DVIM-VGAF.asp

CC-DVI-SVID DVI to S-Video Cable (FG10-2170-10)

OVERVIEW The CC-DVI-SVID is a cable used to connect DVI to S-Video input. ONLINE www.amx.com/products/CC-DVI-SVID.asp

INTRO D U C TION C at 5 P r e s e n tat i o n S w i t ch e r s

World Domination Total Control for Sophisticated Meeting and Presentation Environments Control and automation of any sophisticated environment into a simple, flexible, comprehensive solution is what an Environment Controller was built for. Including NetLinx integrated control, multi-format inputs, video switching, transcoding and scaling, local and remote distribution, audio mixing, and amplification; everything in the room or the building can be managed with ease using an Environmental Controller or a Total Experience Kit.

SYSTEM DIAGRAM

INTRO D U C TION C at 5 P r e s e n tat i o n S w i t ch e r s

C at 5 P r e s e n tat i o n S w i t ch e r s

AVX-400 Cat5 Presentation Switcher (FG1350-01) EXPerience Kit(s) Available, see page 23-24

• Multiplies Connection Options – Put the finishing touch on the

OVERVIEW The AVX-400 Enova Cat5 Presentation Switcher combines all of the components you need to control/automate any environment into a simple, flexible, comprehensive solution including control,

installation with two new convenient connection systems, UPX wallplates and HydraPort Cat5 modules. • Simplifies Switching – Automatically displays the newly

multi-format Cat5 inputs, switching, local and remote distribution,

connected source or returns to a pre-set source when a source

plus audio mixing, and amplification - all in a single box.

is disconnected. And comes standard with a source cycle button on every wallplate to toggle between sources.

COMMON APPLICATION AVX-400 is designed for classrooms, simple conference rooms

ONLINE www.amx.com/products/AVX-400.asp

and auditoriums with moderate A/V requirements and a single projector or display. Mount the AVX-400 from the ceiling, above the projector, or near the display and connect up to 4 remote A/V sources using Cat5 cable from Enova wall plates or connectors in

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ AVX -4 0 0 . as p a nd cl i c k o n t he “Tra i ni ng” t a b.

a HydraPort installed in a conference table up to 50 meters away. FEATURES • Offers Presentation Essentials – Including control, multi-format inputs, audio/video switching, audio mixing and amplification –

all over Cat5. • Pre-Packaged to Vault You into Success – Choose from two total environment solutions perfect for small to medium classrooms or meeting room environments. • Delivers 3 Levels of Control – Use a simple software configuration tool for simple, intuitive device selection, add a Novara 8-button keypad for pre-programmed device control, or go all out by adding a NetLinx controller, user interface and code for full custom control. • Increases Productivity over Cat5 – Use cost-effective twisted pair cable to transport audio, video, control and power – all over a single Cat5. • Commands Signal Management Flexibility – Design any combination of RGB, Component, and/or Composite, and walk away from worries about too many of one signal style or not enough of another – just use any UPX universal transmitter wallplate and go.

AV X - 4 0 0 C at 5 P r e s e n tat i o n S w i t ch e r s

A CLOSER LOOK

Ax Li n k Po r t Ax Li n k Dev i ce DI P S w i tch es

So urce Sel ect But t o n

Au x i l i ar y Au d i o I n p u t

Sour ce Inputs

P r o g r am Po rt

RS -2 3 2 C o n tr o l Po r t

Po w e r C o n n e c t o r

Di spl a y C o nt rol Audio Amplifie r Output

Line Level Au d i o Ou tp u t

C o m p o s i te Ou tp u t

HD-1 5 C o m o n en t C o n n ecto r

HD-1 5 RGB/V G A C o n n ecto r

AV X - 4 0 0 C at 5 P r e s e n tat i o n S w i t ch e r s

SPECIFICATIONS DIMENSIONS (HWD)

CERTIFICATIONS

1 3/4” x 9” x 6” (4.45 cm x 22.86 cm x 15.24 cm)

FCC Class B, CE, IEC-60950

WEIGHT

ENVIRONMENTAL

2.57 lbs (1.17 kg) 12VDC, 4.4A supply

• Operating Temperature: 0º C to 40º C (32º F to 104º F) • Operating Humidity: 5% - 85% RH • Storage Temperature: -10º C to 70º C (14º F to 158º F)

AUDIO AMPLIFIER

INCLUDED ACCESSORIES

POWER

Stereo 10W per channel with 7-band graphic equalization ENCLOSURE

Metal with black matte finish FRONT PANEL COMPONENTS

• Source Select Button: 1 button for toggling through the 4 inputs with each press • Source Select LED Indicators: 4 LED indicators which show which source has been selected • Source Inputs: 4 RJ-45 connectors for source audio and video • Auxiliary Audio Output: 1 3.5mm Phoenix (5-pin) connector for use with external audio equipment such as radio microphones and mixers. • A xLink Address DIP Switches: 1 set of 8 DIP switches for setting the AxLink device address of the AVX-400 • A xLink Port: 1 3.5mm Phoenix (4-pin) connector that allows control from an NI master and reports to display information to RMS. A red AxLink LED indicates the state of the AxLink port. • RS-232 Control Port: 1 3.5mm Phoenix (3-pin) connector that provides data to external control devices • Configuration Port: 1 Type-B USB connector for programming the switcher via AMX DCS software • Power Connector: 1 3.5mm Phoenix (2-pin) connector

• 2 5-pin 3.5mm Phoenix connectors, for line-in/out (41-0336) • 1 4-pin 3.5mm Phoenix connector, for AxLink (41-5047) • 2 2-pin 5 mm Phoenix connectors, for speakers (41-0158-SA) • 1 RS-232 3-pin 3.5mm Phoenix connector (41-0338) • 1 PSN4.4, Power Supply, 4.4A, 3.5mm Phoenix, 13.5VDCA5 (FG423-45) • Enova AVX-400-SP Presentation Switcher Installation Guide (93-1350-01) • 1 Suppression Ferrite (04-0018-SA)

REAR PANEL COMPONENTS

• RS-232 Display Control: 1 Male DB9 connector used for controlling the switcher from an RS-232 device such as a PC or laptop • Audio Amplifier Output: 1 5.0mm Phoenix (4-pin) connector capable of delivering 2x10W into 8 ohm amplified variable stereo audio. Can also deliver a dual mono output. • Line Level Audio Output: 1 3.5mm Phoenix (5-pin) connector for mixing program sound • Composite Output: 1 RCA (Y) connector for connecting to a display device • VGA/RGB Output: 1 HD-15 connector for connecting to a display device • Component Output: 1 HD-15 connector for connecting to a display device

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

UPX-CS+A-US UPX-CS+A-UK UPX-CS+A-EU UPX-RGB+A-US UPX-RGB+A-UK UPX-RGB+A-EU UPX-CN+A-US UPX-CN+A-UK UPX-CN+A-EU

Composite Universal Transmitter Wallplate (US) Composite Universal Transmitter Wallplate (UK) Composite Universal Transmitter Wallplate (EU) RGB Universal Transmitter Wallplate (US) RGB Universal Transmitter Wallplate (UK) RGB Universal Transmitter Wallplate (EU) Component Universal Transmitter Wallplate (US) Component Universal Transmitter Wallplate (UK) Component Universal Transmitter Wallplate (EU)

(FG1402-50-SW/SB/SA) (FG1402-50-KW/KB/KA) (FG1402-50-EW/EB/EA) (FG1402-51-SW/SB/SA) (FG1402-51-KW/KB/KA) (FG1402-51-EW/EB/EA) (FG1402-52-SW/SB/SA) (FG1402-52-KW/KB/KA) (FG1402-52-EW/EB/EA)

www.amx.com/products/UPX-CSA-US.asp www.amx.com/products/UPX-CSA-UK.asp www.amx.com/products/UPX-CSA-EU.asp www.amx.com/products/UPX-RGBA-US.asp www.amx.com/products/UPX-RGBA-UK.asp www.amx.com/products/UPX-RGBA-EU.asp www.amx.com/products/UPX-CNA-US.asp www.amx.com/products/UPX-CNA-UK.asp www.amx.com/products/UPX-CNA-EU.asp

37 38 39 40 41 42 43 44 45

C at 5 P r e s e n tat i o n S w i t ch e r s

EXP-TOTAL-AVX-400DC Enova Total EXPerience AVX-400 Drop Ceiling Kit Multiple Conn. (US Mount Wallplates) Multiple Conn. (UK Mount Wallplates) Multiple Conn. (EU Mount Wallplates)

(FG1350-10K) (FG1905-50K) (FG1905-60K)

2-RGB (US Mount Wallplates) 2-RGB (UK Mount Wallplates) 2-RGB (EU Mount Wallplates)

(FG1350-11K) (FG1350-21K) (FG1350-31K)

3-RGB (US Mount Wallplates) 3-RGB (UK Mount Wallplates) 3-RGB (EU Mount Wallplates)

(FG1350-12K) (FG1350-22K) (FG1350-32K)

4-RGB (US Mount Wallplates) 4-RGB (UK Mount Wallplates) 4-RGB (EU Mount Wallplates)

(FG1350-13K) (FG1350-23K) (FG1350-33K)

Components Included With All AVX-400 Drop Ceiling Kits • 1 - AVX-400: Enova Cat5 Presentation Switcher with 4.4 A Power Supply • 1 - SP-08-AX-US/UK/EU: Novara 8-Button KeyPad with AxLink (Kits Available In US, UK or EU Mount) • 2/3/4 - UPX-RGB+A-US/UK/EU-W: Universal Transmitter Wallplate with RGB Video/Stereo Audio, White (Kits Available In US, UK or EU Mount) • 1 - AC-PMNT-DC: Chief® Drop Ceiling Kit • 1 - SPK-IC-400-T: Klipsch® In-Ceiling, Plenum-rated, Loud Speaker Pair Kits With Multiple WallPlate Connection Options (RGB, Component and Composite) also include: • 1 - UPX-CN+A-US/UK/EU-W: Wall Plate Transmitter, Component, US, White (Kits Available In US, UK or EU Mount) • 1 - UPX-CS+A-US/UK/EU-W: Wall Plate Transmitter, Composite, US, White (Kits Available In US, UK or EU Mount) ONLINE www.amx.com/products/EXP-TOTAL-AVX-400DC.asp

C at 5 P r e s e n tat i o n S w i t ch e r s

EXP-TOTAL-AVX-400SM Enova Total EXPerience AVX-400 Surface Mount Kit Multiple Conn. (US Mount Wallplates) Multiple Conn. (UK Mount Wallplates) Multiple Conn. (EU Mount Wallplates)

(FG1350-40K) (FG1350-50K) (FG1350-60K)

2-RGB (US Mount Wallplates) 2-RGB (UK Mount Wallplates) 2-RGB (EU Mount Wallplates)

(FG1350-41K) (FG1350-51K) (FG1350-61K)

3-RGB (US Mount Wallplates) 3-RGB (UK Mount Wallplates) 3-RGB (EU Mount Wallplates)

(FG1350-42K) (FG1350-52K) (FG1350-62K)

4-RGB (US Mount Wallplates) 4-RGB (UK Mount Wallplates) 4-RGB (EU Mount Wallplates)

(FG1350-43K) (FG1350-53K) (FG1350-63K)

Components Included With All AVX-400 Surface Mount Kits • 1 - AVX-400: Enova Cat5 Presentation Switcher with 4.4 A Power Supply • 1 - SP-08-AX-US/UK/EU: Novara 8-Button KeyPad with AxLink (Kits Available In US, UK or EU Mount) • 2/3/4 - UPX-RGB+A-US/UK/EU-W: Universal Transmitter Wallplate with RGB Video/Stereo Audio, White (Kits Available In US, UK or EU Mount) • 1 - AC-PMNT-SM: Chief® Surface Mount Kit • 1 - SPK-W6.5-SMK, 6.5” Wall Speaker Pair with On-Wall Mounting Boxes Kits With Multiple WallPlate Connection Options (RGB, Component and Composite) also include: • 1 - UPX-CN+A-US/UK/EU-W: Wall Plate Transmitter, Component, US, White (Kits Available In US, UK or EU Mount) • 1 - UPX-CS+A-US/UK/EU-W: Wall Plate Transmitter, Composite, US, White (Kits Available In US, UK or EU Mount) ONLINE www.amx.com/products/EXP-TOTAL-AVX-400SM.asp

C at 5 P r e s e n tat i o n S w i t ch e r s

CC-DVI-5BNCM DVI to 5 BNC Male Cable (FG10-2170-08)

OVERVIEW The CC-DVI-5BNC is a 6 ft. cable used to connect BNC Male to a DVI input. ONLINE www.amx.com/products/CC-DVI-5BNCM.asp

CC-DVI-RCA3M DVI to 3 RCA Male Cable (FG10-2170-09)

OVERVIEW The CC-DVI-RCA3M is a 6 ft. cable used to connect 3 RCA Male to a DVI input. ONLINE www.amx.com/products/CC-DVI-RCA3M.asp

C at 5 P r e s e n tat i o n S w i t ch e r s

CC-DVIM-VGAF DVI to HD-15 Female Adapter (FG10-2170-13)

OVERVIEW The CC-DVIM-VGAF is an adapter used to convert VGA Female to a DVI Male. ONLINE www.amx.com/products/CC-DVIM-VGAF.asp

INTRO D U C TION EN V IRONMENT A C C E S S ORIE S

Keeping Total Environment Connected In the Room or Down The Hall, Always Maintain a Clean, Clear Connection Environment Accessories such as the HydraPort HPX-1600 and UPX Wallplate Transmitters are essential components of Total Environment Control. Administrators, presenters and users all need a way to connect their presentation devices and AV equipment to interface with permanently installed room equipment in boardrooms, conference rooms, meeting rooms and auditoriums. These environment accessories offer them a way to connect in a clean, concise and professional manner.

SYSTEM DIAGRAM

INTRO D U C TION EN V IRONMENT A C C E S S ORIE S

Hy dr aPor t Pr ev ie w : Build It Your Way Building your HydraPort co u l d n ’ t b e a n y e a si e r wi th th e co mpl e t e l y customizable online Hydra Po r t Preview tool tha t allo ws y o u t o mix and ma tch all of the a v a i l a b l e po wer, da ta and AV module s t o build a perfect HydraPort e v e r y ti me . Ch e ck i t o ut a t w w w. am x . c om/ hy dr apor t.

EN V IRONMENT A C C E S S ORIE S

HPX-1600 Retractable Connection Port Black

(FG550-BL)

Silver

(FG550-SL)

ONLINE www.amx.com/products/HPX-1600.asp

OVERVIEW HydraPort is the first completely modular, retractable cable connection system built to accommodate the diverse connection needs of conference and meeting room visitors. This sleek, elegant, ergonomic design features a retractable base station that

QUI C K T I P B ui l d t he pe rf e c t c o nne c t i o n po rt f o r a l l y o ur A /V, co n t r o l, n e t wo r k , a nd po w e r re qui re m e nt s usi ng t he H y dra Po rt Pre v ie w w e b a p p lica t io n .

smoothly rises to expose device connections and recedes back down and conceals the typical cable mess that can distract from the business at hand. All this while each cable stays connected. COMMON APPLICATION

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ HP X -1 6 0 0 . as p a nd cl i c k o n t he “Tra i ni ng” t a b.

Boardrooms, conference rooms, meeting rooms or auditoriums where equipment is permanently installed in the room and users must connect to that equipment from a conference table or lectern.

FEATURES • Completely Two-Faced – To provide easy access, HydraPort is double-sided and each side accommodates 8 A/V or Data modules, 4 Power modules, 2 Keypad modules or any combination of these. • More Ways To Enovate – HydraPort incorporates the Enova UPX Transmitters behind the scenes to support the Enova DVX and AVX Total Environment Solutions. • Elegant and Unassuming – The cable ring allows HydraPort to retract flush with the table once connections have been made without crimping or binding any connected cables. The typical wire mess is concealed. • No Electrician Required – The integrated IEC power inlet assembly easily connects to four different power modules providing international power support for virtually every country. • Control The Room – Add Metreau or Novara Keypad modules to add device, lighting, shade or climate control as well as initiate pre-programmed events – all from the HydraPort console. • Simplifying the Installation – A sturdy, re-usable cutting template and router bits are available to simplify the process of cutting the table or lectern, ensuring a correct fit every time.

H P X - 1 6 0 0 H P X - 1 6 0 0 EN V IRONMENT A C C E S S ORIE S

A C LO SE R LOOK: HYD RAPORT PREVIEW

Select from p r e-d e s ig n e d combinations of the most popular m o d u le s t o e n s u re you have the right co n n e c t io n s .

Print both sides of your co n n ecti o n p o r t for re f e re n c e , to acco m p an y a s a le s o rd e r, for your records or to show y o u r cu s to m er.

RGBHV

EN V IRONMENT A C C E S S ORIE S

HydraPort Connection Modules Audio/Video Modules OVERVIEW The HPX-AV100-CS+A module provides Composite video plus stereo audio connectivity to the HydraPort chassis. HPX-AV100-CS+A

1 HydraPort Unit (8 total HydroPort units on each side of the chassis)

(FG552-10)

www.amx.com/products/HPX-AV100-CSA.asp

OVERVIEW The HPX-AV100-RGB+A module provides RGBHV video plus stereo audio connectivity to the HydraPort chassis. HPX-AV100-RGB+A

1 HydraPort Unit (8 total HydroPort units on each side of the chassis)

(FG552-11)

www.amx.com/products/HPX-AV100-RGBA.asp

OVERVIEW The HPX-C5400-CS+A module provides Composite video plus stereo audio connectivity to the HydraPort chassis and activates on button press.

HPX-C5400-CS+A

4 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG552-50-BL-K)

www.amx.com/products/HPX-C5400-CSA.asp

OVERVIEW The HPX-C5400-VGA+A module provides RGBHV video plus stereo audio connectivity to the HydraPort chassis and activates on button press.

HPX-C5400-VGA+A

4 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG552-51-BL-K)

www.amx.com/products/HPX-C5400-VGAA.asp

OVERVIEW The HPX-C5400-CN+A module provides Component video plus stereo audio connectivity to the HydraPort chassis and activates on button press.

HPX-C5400-CN+A

4 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG552-52-BL-K)

www.amx.com/products/HPX-C5400-CNA.asp

EN V IRONMENT A C C E S S ORIE S

Networking Modules OVERVIEW The HPX-N100-RJ45 module provides a single RJ-45 connection to the HydraPort chassis. HPX-N100-RJ45

1 HydraPort Unit (8 total HydroPort units on each side of the chassis)

(FG553-01)

www.amx.com/products/HPX-N100-RJ45.asp

OVERVIEW The HPX-N102-RJ45 module provides two RJ-45 connections to the HydraPort chassis. HPX-N102-RJ45

1 HydraPort Unit (8 total HydroPort units on each side of the chassis)

(FG553-02)

www.amx.com/products/HPX-N102-RJ45.asp

OVERVIEW The HPX-N100-USB module provides a single USB connection to the HydraPort chassis. HPX-N100-USB

1 HydraPort Unit (8 total HydroPort units on each side of the chassis)

(FG553-11)

www.amx.com/products/HPX-N100-USB.asp

OVERVIEW The HPX-U100-BTN module provides discrete button control to the HydraPort chassis. HPX-U100-BTN

1 HydraPort Unit (8 total HydroPort units on each side of the chassis)

(FG554-01)

www.amx.com/products/HPX-U100-BTN.asp

OVERVIEW The HPX-U200-MOD module provides a connection for a Modero Table Top Touch Panel to the HydraPort chassis.

HPX-U200-MOD

2 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG554-81)

www.amx.com/products/HPX-U200-MOD.asp

Control Modules OVERVIEW The HPX-U400-MET-6N module is a Metreau 6-Button keypad in a carrier that allows it to be installed into the HydraPort chassis.

HPX-U400-MET-6N

4 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG554-11-BL-K)

www.amx.com/products/HPX-U400-MET-6N.asp

EN V IRONMENT A C C E S S ORIE S

Control Modules (cont.) OVERVIEW The HPX-U400-MET-7 module is a Metreau 7-Button keypad in a carrier that allows it to be installed into the HydraPort chassis.

HPX-U400-MET-7

4 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG554-13-BL-K)

www.amx.com/products/HPX-U400-MET-7.asp

OVERVIEW The HPX-U400-MET-13 module is a Metreau 13-Button keypad in a carrier that allows it to be installed into the HydraPort chassis.

HPX-U400-MET-13

4 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG554-12-BL-K)

www.amx.com/products/HPX-U400-MET-13.asp

OVERVIEW The HPX-U400-CP-1008 module is a Novara 8-Button (US) ControlPad designed to install directly into the HydraPort chassis.

HPX-U400-CP-1008

4 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG554-71-BL)

www.amx.com/products/HPX-U400-CP-1008.asp

OVERVIEW The HPX-U400-SP-08-AX module is a Novara 8-Button (US) AxLink KeyPad designed to install directly into the HydraPort chassis.

HPX-U400-SP-08-AX

4 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG554-51-BL)

www.amx.com/products/HPX-U400-SP-08-AX.asp

EN V IRONMENT A C C E S S ORIE S

Power Modules OVERVIEW The HPX-P200-US module provides power connectivity for US plug types to the HydraPort chassis.

HPX-P200-US

2 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG551-01)

www.amx.com/products/HPX-P200-US.asp

OVERVIEW The HPX-P200-UK module provides power connectivity for UK plug types to the HydraPort chassis.

HPX-P200-UK

2 1/2 HydraPort Units (8 total HydroPort units on each side of the chassis) (FG551-11)

www.amx.com/products/HPX-P200-UK.asp

OVERVIEW The HPX-P200-EU module provides power connectivity for EU plug types to the HydraPort chassis.

HPX-P200-EU

2 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG551-21)

www.amx.com/products/HPX-P200-EU.asp

OVERVIEW The HPX-P200-AU module provides power connectivity for EU plug types to the HydraPort chassis.

HPX-P200-AU

2 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG551-31)

www.amx.com/products/HPX-P200-AU.asp

Module Blanks & Labels OVERVIEW Blanks are available for unused slots in the HydraPort chassis.

HPX-B050

1/2 HydraPort Unit (8 total HydroPort units on each side of the chassis)

(FG558-01)

www.amx.com/products/HPX-B050.asp

OVERVIEW Blanks are available for unused slots in the HydraPort chassis.

HPX-B100

1 HydraPort Unit (8 total HydroPort units on each side of the chassis)

(FG558-02)

www.amx.com/products/HPX-B100.asp

EN V IRONMENT A C C E S S ORIE S

Module Blanks & Labels (cont.) OVERVIEW Blanks are available for unused slots in the HydraPort chassis.

HPX-B200

2 HydraPort Units (8 total HydroPort units on each side of the chassis)

(FG558-03)

www.amx.com/products/HPX-B200.asp

OVERVIEW The HPX-B050-L is a blank panel that is pad printed with custom text, and are available for labeling slots in the HydraPort chassis. HPX-B050-L

1/2 HydraPort Unit (8 total HydroPort units on each side of the chassis)

(FG558-11)

www.amx.com/products/HPX-B050-L.asp

OVERVIEW The HPX-B100-L is a blank panel that is pad printed with custom text, and are available for labeling slots in the HydraPort chassis. HPX-B100-L

1 HydraPort Unit (8 total HydroPort units on each side of the chassis)

(FG558-12)

www.amx.com/products/HPX-B100L.asp

OVERVIEW The HPX-AC-SB is a stop block used to limit expansion of a partially-filled chassis to only expose the populated modules.

HPX-AC-SB

(FG559-01)

www.amx.com/products/HPX-AC-SB.asp

OVERVIEW The HPX-AC-MB metal plate mounts under the table adjacent to the HydraPort chassis to support a sideways mounting of hardware devices such as an NI-700.

HPX-AC-MB

(FG559-21)

www.amx.com/products/HPX-AC-MB.asp

OVERVIEW The HydraPort Installation Tool Kit includes a sturdy, re-usable cutting template and router bits to simplify the process of cutting the table or lectern, ensuring a correct fit every time.

HPX-AC-TK

(FG559-90)

www.amx.com/products/HPX-AC-TK.asp

EN V IRONMENT A C C E S S ORIE S

UPX-CS+A-US Composite Universal Transmitter Wallplate (US) White

UPX-CS+A-US-WH

(FG1402-50-SW)

Black

UPX-CS+A-US-BL

(FG1402-50-SB)

Brushed Aluminum

UPX-CS+A-US-BA

(FG1402-50-SA)

OVERVIEW

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ U P X -C S A -U S. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

The UPX-CS+A Universal Transmitter Wallplates offer a convenient way to take control of your presentation. The wallplate converts one Composite video source over a single Cat5 cable, along with audio, source-select control, and with power supplied from the receiver.

COMMON APPLICATION Boardrooms, conference rooms, meeting rooms or auditoriums where equipment is permanently installed in the room and users must connect to that equipment from a wall or lectern. ONLINE www.amx.com/products/UPX-CSA-US.asp

SPECIFICATIONS DIMENSIONS (HWD)

4 11/16” x 2 15/16” x 1 1/2” (11.9 cm x 7.4 cm x 3.8 cm) WEIGHT

3.06 oz (86.8 g) POWER

Power received over Cat5 connection from either the AVX-400 or DVX-2100HD switchers MOUNTING

Mounts into US single gang back boxes. FRONT PANEL COMPONENTS

• 1 Active button • 1 RCA (Y) connector for connecting to a composite source • 2 female RCA connectors for audio signals REAR PANEL COMPONENTS

1 RJ-45 connector for receiving power from the receiver and transmitting audio and video source signals ENVIRONMENTAL

• Storage Temperature: 14° F to 158° F (-10° C to 70° C) • Operating Temperature: 32° F to 104° F (0° C to 40° C) COLORS AVAILABLE

The wallplates are available in three color schemes: Black (B), White (W), and Brushed Aluminum (AL). CERTIFICATIONS

FCC Class B, CE, and IEC 60950 INCLUDED ACCESSORIES

• UPX Universal Transmitter Wallplate Installation Guide (FG93-1402-52) • Main to I/F Grounding Cable (64-2250-32)

EN V IRONMENT A C C E S S ORIE S

UPX-CS+A-UK Composite Universal Transmitter Wallplate (UK) White

UPX-CS+A-UK-WH

(FG1402-50-KW)

Black

UPX-CS+A-UK-BL

(FG1402-50-KB)

Brushed Aluminum

UPX-CS+A-UK-BA

(FG1402-50-KA)

OVERVIEW

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ U P X -C S A -U K . as p a nd cl i c k o n t he “Tra i ni ng” t a b.

SPECIFICATIONS DIMENSIONS (HWD)

8.6 cm x 14.7 cm x 3.8 cm (3 3/8” x 5 13/16” x 1 1/2”) WEIGHT

123.8 g (4.36 oz) POWER

Power received over Cat5 connection from either the AVX-400 or DVX-2100HD switchers MOUNTING

Mounts into a majority of International double gang back boxes FRONT PANEL COMPONENTS

• 1 Active button • 1 RCA (Y) connector for connecting to a composite source • 2 female RCA connectors for audio signals REAR PANEL COMPONENTS

1 RJ-45 connector for receiving power from the receiver and transmitting audio and video source signals ENVIRONMENTAL

• Storage Temperature: -10° C to 70° C (14° F to 158° F) • Operating Temperature: 0° C to 40° C (32° F to 104° F) COLORS AVAILABLE

The wallplates are available in three color schemes: Black (B), White (W), and Brushed Aluminum (AL). CERTIFICATIONS

FCC Class B, CE, and IEC 60950 INCLUDED ACCESSORIES

• UPX Universal Transmitter Wallplate Installation Guide (FG93-1402-52) • Main to I/F Grounding Cable (64-2250-32)

EN V IRONMENT A C C E S S ORIE S

UPX-CS+A-EU Composite Universal Transmitter Wallplate (EU) White

UPX-CS+A-EU-WH

(FG1402-50-EW)

Black

UPX-CS+A-EU-BL

(FG1402-50-EB)

Brushed Aluminum

UPX-CS+A-EU-BA

(FG1402-50-EA)

OVERVIEW

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ U P X -C S A -EU. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

SPECIFICATIONS DIMENSIONS (HWD)

8 cm x 15.2 cm x 3.8 cm (3 1/8” x 6” x 1 1/2”) WEIGHT

120.8 g (4.26 oz) POWER

Power received over Cat5 connection from either the AVX-400 or DVX-2100HD switchers MOUNTING

Mounts into a majority of International double gang back boxes FRONT PANEL COMPONENTS

• 1 Active button • 1 RCA (Y) connector for connecting to a composite source • 2 female RCA connectors for audio signals REAR PANEL COMPONENTS

1 RJ-45 connector for receiving power from the receiver and transmitting audio and video source signals ENVIRONMENTAL

• Storage Temperature: -10° C to 70° C (14° F to 158° F) • Operating Temperature: 0° C to 40° C (32° F to 104° F) COLORS AVAILABLE

The wallplates are available in three color schemes: Black (B), White (W), and Brushed Aluminum (AL). CERTIFICATIONS

FCC Class B, CE, and IEC 60950 INCLUDED ACCESSORIES

• UPX Universal Transmitter Wallplate Installation Guide (FG93-1402-52) • Main to I/F Grounding Cable (64-2250-32)

EN V IRONMENT A C C E S S ORIE S

UPX-RGB+A-US RGB Universal Transmitter Wallplate (US) White

UPX-RGB+A-US-WH

(FG1402-51-SW)

Black

UPX-RGB+A-US-BL

(FG1402-51-SB)

Brushed Aluminum

UPX-RGB+A-US-BA

(FG1402-51-SA)

OVERVIEW

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ U P X -R G B A -U S. as p a nd cl i c k o n t he “Tra i ni ng” t a b .

The UPX-RGB+A Universal Transmitter Wallplates offer a convenient way to take control of your presentation. The wallplate converts one HD-15 video source over a single Cat5 cable, along with audio, source-select control, and with power supplied from the receiver.

SPECIFICATIONS DIMENSIONS (HWD)

4 11/16” x 2 15/16” x 1 1/2” (11.9 cm x 7.4 cm x 3.8 cm) WEIGHT

3.32 oz (94.2 g) POWER

Power received over Cat5 connection from either the AVX-400 or DVX-2100HD switchers FRONT PANEL COMPONENTS

• 1 Active button • 1 HD-15 connector for connecting to the source • 1 3.5mm/1/8th” Stereo jack for source audio connection REAR PANEL COMPONENTS

1 RJ-45 connector for receiving power from the receiver and transmitting audio and video source signals ENVIRONMENTAL

• Storage Temperature: 14° F to 158° F (-10° C to 70° C) • Operating Temperature: 32° F to 104° F (0° C to 40° C) COLORS AVAILABLE

The wallplates are available in three color schemes: Black (B), White (W), and Brushed Aluminum (AL). CERTIFICATIONS

FCC Class B, CE, and IEC 60950 INCLUDED ACCESSORIES

• UPX Universal Transmitter Wallplate Installation Guide (FG93-1402-52) • Main to I/F Grounding Cable (64-2250-32)

EN V IRONMENT A C C E S S ORIE S

UPX-RGB+A-UK RGB Universal Transmitter Wallplate (UK) White

UPX-RGB+A-UK-WH

(FG1402-51-KW)

Black

UPX-RGB+A-UK-BL

(FG1402-51-KB)

Brushed Aluminum

UPX-RGB+A-UK-BA

(FG1402-51-KA)

OVERVIEW

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ U P X -R G B A -U K . as p a nd cl i c k o n t he “Tra i ni ng” t a b .

SPECIFICATIONS DIMENSIONS (HWD)

8.6 cm x 14.7 cm x 3.8 cm (3 3/8” x 5 13/16” x 1 1/2”) WEIGHT:

134.3 g (4.73 oz.) POWER

Power received over Cat5 connection from either the AVX-400 or DVX-2100HD switchers MOUNTING

Mounts into UK and European double gang back boxes. FRONT PANEL COMPONENTS

• 1 Active button • 1 HD-15 connector for connecting to the source • 1 3.5mm/1/8th” Stereo jack for source audio connection REAR PANEL COMPONENTS

1 RJ-45 connector for receiving power from the receiver and transmitting audio and video source signals ENVIRONMENTAL

• Storage Temperature: -10° C to 70° C (14° F to 158° F) • Operating Temperature: 0° C to 40° C (32° F to 104° F) COLORS AVAILABLE

The wallplates are available in three color schemes: Black (B), White (W), and Brushed Aluminum (AL). CERTIFICATIONS

FCC Class B, CE, and IEC 60950 INCLUDED ACCESSORIES

• UPX Universal Transmitter Wallplate Installation Guide (FG93-1402-52) • Main to I/F Grounding Cable (64-2250-32)

EN V IRONMENT A C C E S S ORIE S

UPX-RGB+A-EU RGB Universal Transmitter Wallplate (EU) White

UPX-RGB+A-EU-WH

(FG1402-51-EW)

Black

UPX-RGB+A-EU-BL

(FG1402-51-EB)

Brushed Aluminum

UPX-RGB+A-EU-BA

(FG1402-51-EA)

OVERVIEW

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ U P X -R G B A -EU. as p a nd cl i c k o n t he “Tra i ni ng” t a b .

SPECIFICATIONS DIMENSIONS (HWD)

8 cm x 15.2 cm x 3.8 cm (3 1/8” x 6” x 1 1/2”) WEIGHT:

128.3 g (4.52 oz.) POWER

Power received over Cat5 connection from either the AVX-400 or DVX-2100HD switchers MOUNTING

Mounts into UK and European double gang back boxes. FRONT PANEL COMPONENTS

• 1 Active button • 1 HD-15 connector for connecting to the source • 1 3.5mm/1/8th” Stereo jack for source audio connection REAR PANEL COMPONENTS

1 RJ-45 connector for receiving power from the receiver and transmitting audio and video source signals ENVIRONMENTAL

• Storage Temperature: -10° C to 70° C (14° F to 158° F) • Operating Temperature: 0° C to 40° C (32° F to 104° F) COLORS AVAILABLE

The wallplates are available in three color schemes: Black (B), White (W), and Brushed Aluminum (AL). CERTIFICATIONS

FCC Class B, CE, and IEC 60950 INCLUDED ACCESSORIES

• UPX Universal Transmitter Wallplate Installation Guide (FG93-1402-52) • Main to I/F Grounding Cable (64-2250-32)

EN V IRONMENT A C C E S S ORIE S

UPX-CN+A-US Component Universal Transmitter Wallplate (US) White

UPX-CN+A-US-WH

(FG1402-52-SW)

Black

UPX-CN+A-US-BL

(FG1402-52-SB)

Brushed Aluminum

UPX-CN+A-US-BA

(FG1402-52-SA)

OVERVIEW

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ U P X -C NA -U S. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

The UPX-CN+A Universal Transmitter Wallplates offer a convenient way to take control of your presentation. The wallplate converts one Component video source over a single Cat5 cable, along with audio, source-select control, and with power supplied from the receiver.

SPECIFICATIONS DIMENSIONS (HWD)

4 11/16” x 2 15/16” x 1 1/2” (11.9 cm x 7.4 cm x 3.8 cm) WEIGHT

3.32 oz (94.2 g) POWER

Power received over Cat5 connection from either the AVX-400 or DVX-2100HD switchers MOUNTING

Mounts into US single gang back boxes FRONT PANEL COMPONENTS

• 1 Active button • 3 female RCA connectors for component video signals • 2 female RCA connectors for audio signals REAR PANEL COMPONENTS

1 RJ-45 connector for receiving power from the receiver and transmitting audio and video source signals ENVIRONMENTAL

• Storage Temperature: 14° F to 158° F (-10° C to 70° C) • Operating Temperature: 32° F to 104° F (0° C to 40° C) COLORS AVAILABLE

The wallplates are available in three color schemes: Black (B), White (W), and Brushed Aluminum (AL). CERTIFICATIONS

FCC Class B, CE, and IEC 60950 INCLUDED ACCESSORIES

• UPX Universal Transmitter Wallplate Installation Guide (FG93-1402-52) • Main to I/F Grounding Cable (64-2250-32)

EN V IRONMENT A C C E S S ORIE S

UPX-CN+A-UK Component Universal Transmitter Wallplate (UK) White

UPX-CN+A-UK-WH

(FG1402-52-KW)

Black

UPX-CN+A-UK-BL

(FG1402-52-KB)

Brushed Aluminum

UPX-CN+A-UK-BA

(FG1402-52-KA)

OVERVIEW

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ U P X -C NA -U K . as p a nd cl i c k o n t he “Tra i ni ng” t a b.

SPECIFICATIONS DIMENSIONS (HWD)

8.6 cm x 14.7 cm x 3.8 cm (3 3/8” x 5 13/16” x 1 1/2”) WEIGHT

132.2 g (4.66 oz) POWER

Power received over Cat5 connection from either the AVX-400 or DVX-2100HD switchers MOUNTING

Mounts into US single gang back boxes FRONT PANEL COMPONENTS

• 1 Active button • 3 female RCA connectors for component video signals • 2 female RCA connectors for audio signals REAR PANEL COMPONENTS

1 RJ-45 connector for receiving power from the receiver and transmitting audio and video source signals ENVIRONMENTAL

• Storage Temperature: -10° C to 70° C (14° F to 158° F) • Operating Temperature: 0° C to 40° C (32° F to 104° F) COLORS AVAILABLE

The wallplates are available in three color schemes: Black (B), White (W), and Brushed Aluminum (AL). CERTIFICATIONS

FCC Class B, CE, and IEC 60950 INCLUDED ACCESSORIES

• UPX Universal Transmitter Wallplate Installation Guide (FG93-1402-52) • Main to I/F Grounding Cable (64-2250-32)

EN V IRONMENT A C C E S S ORIE S

UPX-CN+A-EU Component Universal Transmitter Wallplate (EU) White

UPX-CN+A-EU-WH

(FG1402-52-EW)

Black

UPX-CN+A-EU-BL

(FG1402-52-EB)

Brushed Aluminum

UPX-CN+A-EU-BA

(FG1402-52-EA)

OVERVIEW

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ U P X -C NA -EU. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

SPECIFICATIONS DIMENSIONS (HWD)

8 cm x 15.2 cm x 3.8 cm (3 1/8” x 6” x 1 1/2”) WEIGHT

125.2 g (4.41 oz) POWER

Power received over Cat5 connection from either the AVX-400 or DVX-2100HD switchers MOUNTING

Mounts into US single gang back boxes FRONT PANEL COMPONENTS

• 1 Active button • 3 female RCA connectors for component video signals • 2 female RCA connectors for audio signals REAR PANEL COMPONENTS

1 RJ-45 connector for receiving power from the receiver and transmitting audio and video source signals ENVIRONMENTAL

• Storage Temperature: -10° C to 70° C (14° F to 158° F) • Operating Temperature: 0° C to 40° C (32° F to 104° F) COLORS AVAILABLE

The wallplates are available in three color schemes: Black (B), White (W), and Brushed Aluminum (AL). CERTIFICATIONS

FCC Class B, CE, and IEC 60950 INCLUDED ACCESSORIES

• UPX Universal Transmitter Wallplate Installation Guide (FG93-1402-52) • Main to I/F Grounding Cable (64-2250-32)

TOU C H PANEL S

272 x 480 p ortrait

NXD-435P

R e so l ut i o n

A s p e ct R a t io

4.3” Modero Wall/Flush Mount Touch Panel ®

White

NXD-435P-WH (FG2262-15)

Black

NXD-435P-BL (FG2262-14)

OVERVIEW

HELP FUL HI NT The NXD-4 3 5 P c a n be i nst a l l e d i nt o a n y so l i d surf a ce e n vir o n m e n t , u s i n g e i t h e r s o l i d s u r f a c e s c r e w s o r t h e i n cl u d e d l o c k i n g t a b s f o r di f f e re nt m o unt i ng o pt i o ns.

The NXD-435P portrait configuration touch panel allows for Modero Touch Panel functionality in a vertical form factor, perfect for keypad replacement in a room or schedule display outside of a room. Users can quickly execute a function or command using the stylish capacitive touch buttons along the side of the Touch Panel.

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ NX D-4 3 5 P. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

COMMON APPLICATION The Modero 4.3” Portrait Touch Panel in a vertical form factor is perfect for searching through cover art or being used to display a schedule outside of a room. It is can be used for a variety of costsensitive applications where touch panel control offers many more

A CLOSER LOOK

control/automation possibilities than a similarly priced keypad or remote: locations such as entryways, bedrooms, bathrooms,

Tr an s l u cen t Back Bo x

kitchens, podiums and other surface mount locations.

Eth er n et (1 0 /1 0 0 ) M i n i -US B Po r t

FEATURES • Portrait mode 4.3” display with touch • Screen resolution (HV) 272x480 pixels • Available in a high-gloss and textured matte combination finish in your choice of black or white • Power over Ethernet (PoE) • 128 MB Standard memory/256 MB Flash memory • 5 capacitive-touch external buttons • Ultra-thin 2” depth for versatile installation options

AMX NetLinx NI-3101 Signature Series Integrated Controller

• Locking tabs for quick and easy installation

(back view of controller)

• Translucent backbox • Supports AMX Resource Management Suite Ethernet Switch

ONLINE www.amx.com/products/NXD-435P.asp Lights

Display

All On

Average Usage

Sleep Mode

Estimaged Usage

105 kwH

13 kwH

21 kwH

34 kwH

ANNUAL ENERGY CONSUMPTION

AMX Energy Savings

67% ANNUAL ENERGY SAVINGS USING RMS & SMART PROGRAMMING

Video Conference Ethernet RS-232 Relay S-Video

Shades

AMX NXD-435P 4.3” Modero Portrait Wall/ Flush Mount Touch Panel

N X D - 4 3 5 P TOU C H PANEL S

SPECIFICATIONS SIDE PANEL CONNECTORS

DIMENSIONS (HWD)

• NXD-435P: 4 1/8” x 5 1/2” x 2 1/8” (10.5 cm x 14 cm x 5.4 cm) • CB-TP5 Rough-In/Wallbox (optional): 4 1/4” x 5 1/8” x 3 3/8” (10.9 cm x 13.1 cm x 8.6 cm) WEIGHT

10.4 oz (290 g) POWER REQUIREMENTS

• PoE Powered - No local Power Supply needed • Max power draw: 5.5W PANEL LCD PARAMETERS

• Aspect ratio: 16 x 9 • Minimum brightness (luminance): 280 cd/m2 • Channel transparency: 8-bit Alpha blending • Contrast ratio: 250:1 • Display colors: 256 thousand colors (18-bit color depth) • Dot/pixel pitch: 0.14 mm • Panel type: WQVGA • Screen resolution: 272 x 480 pixels (HV) @ 60 Hz frame frequency • Viewing dimensions: 2.58” x 4.3” (65.2 mm x 109.2 mm) • Active Screen Area: 2.55” x 4.25” (6.48 cm x 10.80 cm) VIEWING ANGLE

Left/Right /Up/Down: 80/60/80/80 IR RECEPTION ANGLE

• Vertical: + 25º (left and right from center) • Horizontal: + 15º (up and down from center)

• Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication. The Ethernet port automatically negotiates the connection speed (10 Mbps or 100 Mbps), and whether to use half duplex or full duplex mode. Power is supplied through Power Over Internet (PoE). NXD-435P panels communicate with the NetLinx Master using the ICSP protocol over Ethernet. LEDs show communication activity, connections, speeds, and mode information: - L/A-link/activity - Yellow LED lights On when the Ethernet cables are connected and terminated correctly and then blinks when receiving Ethernet data packets. - SPD-speed - Green LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps. Mini-USB Connector: 5-pin Mini-USB connector used for programming, firmware update, and touch panel file transfer between the PC and the target panel. MEMORY (FACTORY DEFAULT)

• 128 MB SDRAM • 256 MB integrated Flash Memory (not upgradeable - factory programmed) CERTIFICATIONS

FCC Part 15 Class B, CE, IEC 60950, RoHS Panel ENVIRONMENTAL

• Operating Temperature: 0° C (32° F) to 40° C (104° F) • Operating Humidity: 5% to 85% relative humidity (non-condensing) • Storage Temperature: -20° C (-4° F) to 60° C (140° F) • Storage Humidity: 5% to 85% RH INCLUDED ACCESSORIES

NXD-435P Installation Guide (93-2261-02)

FRONT PANEL COMPONENTS

• Center Button: Capacitive touch button provides both access to the Setup and Calibration pages and toggles the panel between a “sleep” or “wake” state. This button is also user-programmable. • Capacitive Touch Buttons: four user-programmable buttons, two on either side of the Center Button

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

CB-TP5i CB-TP5ib PS-POE-AF CC-USB NXA-RK5

Rough-in/Wallbox for NXD-435 Back Cover for the CB-TP5i Wallbox PoE Injector Type-A to Mini-B 5-wire programming cable Rack Mount Kit for 5” Wall Mount panels

(FG038-11) (FG038-12) (FG423-80) (FG10-5965) (FG2904-55)

www.amx.com/products/CB-TP5i.asp www.amx.com/products/CB-TP5ib.asp www.amx.com/products/PS-POE-AF.asp www.amx.com/products/CC-USB.asp www.amx.com/products/NXA-RK5.asp

76 76 240 96 79

CATALOG CATALOG CATALOG CATALOG CATALOG

TOU C H PANEL S

NXV-300 Modero Virtual Touch Panel ®

(FG2263-01)

OVERVIEW The Modero NXV-300 is an ideal solution when you need the intelligence and ease of use that only a touch panel can offer but from remote locations - the back of the room, across the campus

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ NX V-3 0 0 . as p a nd cl i c k o n t he “Tra i ni ng” t a b.

or anywhere over the Internet. This small rack-mountable device (similar in size to an NI-700 NetLinx Controller) allows users to access their system via any PC or Mac via Virtual Network Connection (VNC). Users simply navigate to the device using a browser (Internet Explorer, Firefox and Safari for PCs and Firefox and Safari for Macs) and login with a username/password. Except for viewing the device in a browser window and interacting with a mouse, everything looks and works exactly the same as using any Modero Touch Panel. And the NXV-300 is easily configured for viewing. It is viewable in two resolutions, 800x480 and 480x272, which allows the use of many existing touch panel page files. COMMON APPLICATION Ideal for simplified room control, convenient back-up in case a touch panel is inaccessible, cost-effective secondary control, or enhanced help desk support. ONLINE www.amx.com/products/NXV-300.asp

U S ER INTER FA C E A C C E S S ORIE S

NXA-TTS43X Table Top Stand for the NXD-430/435 (FG2262-40)

OVERVIEW When the best use of a touch panel is not on a wall, but on a

or conference tables. With the introduction of the Table Top

table, desk, credenza or nightstand, use the NXA-TTS43X. These

Stands AMX provides small, low-cost tabletop solutions for secure

table top stands allow the NXD-430/435 touch panels to be

environments and mission critical applications where wireless

installed on just about any horizontal surface. Install the Touch

communication is not permitted.

Panel in the stand and place on any horizontal surface – avoiding the need to cut holes in the wall/table.

FEATURES • Stands sold as empty enclosures for an optional accessory

COMMON APPLICATION

• Dealer/end user can easily install in stand themselves

The Table Top Stands can be placed on any flat surface where

• Simplified system connection - uses a single UTP cable for

users need convenient access to their control system. Its small profile and affordable price allows a small touch panel to be installed in places where they were previously not considered –

power, control and network • Attractive design and small footprint allow it to be placed on in a variety of settings

like night stands, end tables, podiums and desks ONLINE www.amx.com/products/NXA-TTS43X.asp

NXA-TTS500 Table Top Stand for the NXD-500i (FG2261-50)

OVERVIEW When the best use of a touch panel is not on a wall, but on a

Stands AMX provides small, low-cost tabletop solutions for secure

table, desk, credenza or nightstand, use the NXA-TTS500. These

environments and mission critical applications where wireless

table top stands allow the NXD-500i touch panels to be installed

communication is not permitted.

on just about any horizontal surface. Install the Touch Panel in the stand and place on any horizontal surface – avoiding the need to

FEATURES

cut holes in the wall/table.

• Stands sold as empty enclosures for an optional accessory • Dealer/end user can easily install in stand themselves

COMMON APPLICATION The Table Top Stands can be placed on any flat surface where users need convenient access to their control system. Its small profile and affordable price allows a small touch panel to be

• Simplified system connection - uses a single UTP cable for power, control and network • Attractive design and small footprint allow it to be placed on in a variety of settings

installed in places where they were previously not considered – like night stands, end tables, podiums and desks or conference

ONLINE www.amx.com/products/NXA-TTS500.asp

tables. With the introduction of the Table Top

U S ER INTER FA C E A C C E S S ORIE S

MET-TTS Table Top Stand for up to 3 Metreau Keypads (FG5794-41)

OVERVIEW Introducing a small stylish table top enclosure to mount 1, 2 or

or conference tables. With the introduction of the Table Top

3 Metreau keypads. Install the keypad in the stand and place on

Stands AMX provides small, low-cost tabletop solutions for secure

any horizontal surface – avoiding the need to cut holes in the

environments and mission critical applications where wireless

wall/table. Easily connect the enclosure to the control system

communication is not permitted.

by using a single UTP cable for power, control and network communication. Table Top Stands are available for up to 3

FEATURES

Metreau Keypads in an enclosure.

• Stands sold as empty enclosures for an optional accessory • Dealer/end user can easily install in Stand themselves • Simplified system connection - uses a single UTP cable for

power, control and network • Attractive design and small footprint allow it to be placed on in a variety of settings

keypad to be installed in places where they were previously not considered – like night stands, end tables, podiums and desks

ONLINE www.amx.com/products/NXA-TTS43X.asp

U S ER INTER FA C E A C C E S S ORIE S

NXR-ZGW-PRO NetLinx ZigBee Pro Gateway ®

SPECIFICATIONS DIMENSIONS (HWD)

4.50” x 2.50” x 0.94” (114.30 mm x 63.50 mm x 23.81 mm) N o t e : d e p th d o e s n o t i n cl u d e a n te n n a

(FG5791-11)

WEIGHT

• Without Antenna: 0.35 lbs (158.75g) • With Antenna: 0.40 lbs (181.44g) POWER

• 10.5 - 18 VDC; (13.5 VDC nominal operation voltage) • Power over Ethernet (PoE) Class 2 MEMORY

• 16MB of FLASH

OVERVIEW The ZigBee Pro Gateway enhances the original ZigBee Gateway, which allows Mio Modero R-4 and R-3 Remotes the ability to wirelessly communicate with NetLinx Controllers and control connected system devices. ZigBee Pro is an ideal solution for retrofit projects where control wires cannot be run and for installations such as Government or Bank Buildings, where 802.11 security concerns prevent it from being used. ZigBee Pro Repeaters are also available to extend ZigBee coverage throughout a building.

• 16MB of SDRAM

RADIO SPECIFICATIONS

• Frequency: 2.4GHz • Operating Channels: 11 – 26 • Modulation Technique: DSS • Output Power: Region/country specific • Coverage Area: 165 feet (50.2m) FIRMWARE/SOFTWARE SPECIFICATIONS

• Management: Built-in browser-based management with User Name/Password authentication • IP Configuration: Static IP or DHCP client (default is DHCP/Zeroconf) • Communications: ZigBee, TCP/IP FRONT COMPONENTS

FEATURES • Improved Range and Greater Roaming Distance - ZigBee Pro Gateways feature 6dB of improved sensitivity which translates to up to 65 additional feet of range (actual performance can vary based on the environment). • Supports Third Party Devices - While Mio R-3 and R-4 Remotes are currently the only AMX-supported ZigBee Pro devices, the ZigBee Pro Gateway will be able to communicate with third party ZigBee Pro devices in the future. • Encrypted for Security - All wireless communications on ZigBee Pro are encrypted, further protecting user data and ZigBee Pro utilizes the 802.15.4 protocol, offering an alternative to 802.11. • Onboard Diagnostic Tool With Signal Strength - A convenient diagnostic tool is included which can display signal strength and latency directly on Mio R-4s and R-3s to assist with installation and troubleshooting to determine the best location for

• LEDs - P WR/STATUS: Blinking green LED: the device is installed and communicating properly. Power ON, but no master connection, is indicated with a solid light, Power OFF is indicated with no light. - L AN: Green LED: Ethernet connection is established. Blinking: indicates both sending and receiving information via Ethernet. - RF: Solid LED: end devices are connected; no LED: end devices not connected; LED blinks to indicate activity. • Antenna Mount: A reverse SMA connection that supports a 2.4GHz antenna. • ID Button: When used in conjunction with NetLinx Studio, sets the device and system numbers for the NXR-ZGW-PRO. Press and hold for approximately 30 seconds to return the NXR-ZGW-PRO to factory default settings. REAR COMPONENTS

• Power connector : 2-pin 3.5mm captive-wire connector • Power Over Ethernet (PoE) - Powers the device through the CAT5 cable. Both Power and Data can be transmitted simultaneous through the CAT5 cable when using the appropriate equipment. • Ethernet Port: 10/100BaseT Modular (RJ-45) connector - connects the NXR-ZGW-PRO to your LAN. ENVIRONMENTAL

Gateways and Repeaters. ONLINE www.amx.com/products/NXR-ZGW-PRO.asp DID YO U K NO W? ZigBee Pro is an enhanced version of the ZigBee protocol tha t adds s i g n i f i c a n t fea tures and enhances man y pre-existing ZigBee fea tures. ZigBee Pr o i s quickly emerging as a major force in wireless home automa tion, adv a n c e d metering (“smart grid”), and other market areas. Utilizing ZigBee Pr o a l l o w s AMX ’s ZigBee pr oduc ts to ha ve i mpro ve d p e rfo rma n ce a s we l l a s to ut i l i z e a s tandar d tha t is gaining tra cti o n th ro u gho ut th e co n tro l a nd CE wo rl ds.

• Operating Temperature: -30°C (-22°F) to 70°C (158°F) • Relative Humidity: 5% to 85% non-condensing; intended for indoor use only CERTIFICATIONS

FCC ID: CWU-NXRZGWPRO, IC: 5078B-ZGWPRO, CE, IEC-60950-1, Japan Approval, ZigBee Certified INCLUDED ACCESSORIES

• Rubber feet, Velcro mounting strip • 2.4GHZ, MONO, RSMA, 3.5IN, 2.0DBI Antenna (70-0012-SA) • Power Supply (24-5791-SA)

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

NXR-ZRP-PRO

NetLinx ZigBee Pro Repeater

(FG5791-03)

www.amx.com/products/NXR-ZRP.asp

U S ER INTER FA C E A C C E S S ORIE S

NXR-ZRP-PRO

SPECIFICATIONS

NetLinx ZigBee Pro Repeater ®

DIMENSIONS (HWD)

1” x 2 1/2” x 3 1/2” (2.3 cm x 6.4 cm x 8.7 cm) N o t e : d e p th d o e s n o t i n cl u d e a n te n n a

(FG5791-03)

WEIGHT

4 oz (113.39 g) POWER

10.5 – 18 VDC; (13.5 VDC nominal operation voltage) MEMORY

• 16 MB of FLASH • 1 MB external memory OVERVIEW

RADIO SPECIFICATIONS

The NetLinx ZigBee Pro Repeater can be added throughout the installation to ensure a comprehensive, broad wireless coverage area with no “dead spots,” or where extra coverage is needed. COMMON APPLICATION

• Frequency: 2.4GHz • Operating Channels: 11 – 26 • Modulation Technique: DSS • Output Power: Region/country specific • Coverage Area: 165 feet (50.2m) FIRMWARE/SOFTWARE SPECIFICATIONS

Ideal for increasing the wireless coverage area of ZigBee devices throughout residences or commercial buildings.

• IP Configuration: Static IP or DHCP client (default is static, 192.168.1.140) • Communications: ZigBee, TCP/IP, The NXR-ZRP communicates with a Netlinx master via a NXR-ZGW. FRONT COMPONENTS

FEATURES • Can coexist with 802.11 wireless networks without signal interference • Supports 16 wireless channels for interference tolerance • Provides redundant paths of communication • Configurable to include or exclude a ZigBee device on the ZigBee network ONLINE www.amx.com/products/NXR-ZRP.asp

• LEDs - P WR/STATUS: Power ON is indicated with a solid light. Power OFF is indicated with no light. - RF: The LED is solid when end devices are connected; end devices not connected is indicated with no LED light; the LED blinks to indicate activity. - ICSP: The LED is solid when ICSP connection is in place with the NetLinx master. • Antenna Mount: A reverse SMA connection that supports a 2.4GHz antenna. • ID Button: Press and hold for approximately 10 seconds to return the NXR-ZRP to factory default settings. REAR COMPONENTS

T R A INING AVAILAB LE For im por tant ins talla t i o n , co n fi gura ti o n a n d p ro g ra mmi n g te ch ni que s, AMX Univer s ity tr aining i s a va i l a b l e . Ju st vi si t ww w.a mx.c om/pr oduc ts / NXR - ZR P. as p and clic k o n th e “Tra i ni ng” ta b .

• Power connector : 2-pin 3.5mm captive-wire connector • Power Over Ethernet (PoE) - Powers the device through the CAT5 cable. Both Power and Data can be transmitted simultaneous through the CAT5 cable when using the appropriate equipment. • Ethernet Port: 10BaseT Modular (RJ-45) connector - connects the NXRZGW to your LAN and/or to connect your third party deviceto the LAN when the NXRZGW is used as a gateway. ENVIRONMENTAL

• Operating Temperature: -30°C (-22°F) to 70°C (158°F) • Relative Humidity: 5% to 85% non-condensing; intended for indoor use only

AMX Mio Modero R-4 Remote Control

CERTIFICATIONS

IC ID: 5088A-ZRD, CE, IEC-60590, TELEC INCLUDED ACCESSORIES

AMX NetLinx Zigbee Repeater

• Rubber feet, Velcro mounting strip • 2.4GHZ, MONO, RSMA, 3.5IN, 2.0DBI Antenna (70-0012-SA) • Power Supply (24-5791-SA)

AMX NetLinx Zigbee Gateway AMX NetLinx NI-2100 Integrated Controller (back view of controller)

U S ER INTER FA C E A C C E S S ORIE S

AP-TTS16 Table Top Stand for Novara 16 Button Keypads (FG1301-17)

OVERVIEW Introducing a small stylish table top base for the Novara 16 Button

environments and mission critical applications where wireless

Keypads. Place on any horizontal surface – avoiding the need to

communication is not permitted.

cut holes in the wall/table. FEATURES COMMON APPLICATION The Table Top Stands can be placed on any flat surface where

• Stands sold as empty enclosures as an optional keypad accessory for Novara 16-button keypads

users need convenient access to their control system. Its small

• Dealer/end user can easily install in stand themselves

profile and affordable price allows the Novara 16 Button Keypad

• Attractive design and small footprint allow it to be placed on in

to be installed in places where it was previously not considered – like night stands, end tables, podiums and desks or conference tables. With the introduction of the Table Top Stands AMX

a variety of settings • Flexible design/single cable connection allows users to easily move the enclosure while in control

provides small, low-cost tabletop solutions for secure ONLINE www.amx.com/products/AP-TTS16.asp

PRE - EN G INEER e d MATRI X S WIT C H ER S

HDMI

Optima Pre-Engineered Matrix Switchers

Digital Video

Digital Video with HDMI AVS-OP-0808-JD0

8x8 (2RU)

(FGP46-0808-JD0)

• Features our EDID Programmer allowing specific display EDID

OVERVIEW The Optima 8x8 HDMI Matrix Switcher is fully HDCP compliant

settings to be custom loaded on each input

and designed to route and distributed high-resolution HDMI

• Standard RS-232 control port

signals to multiple displays while maintaining a true, digital

• Supports AutoPatch’s simple BCS serial control protocol

signal. While supporting resolutions up to 1900x1200 (including

• Optional TCP/IP control via external APWeb module

1920x1080p), this true matrix switching solution features AMX’s

• Includes intuitive CP-15 front mounted control panel featuring

HDCP InstaGate® technology allowing HDMI signal switching

LED backlit LCD and blue light buttons, allowing quick and easy

without delays due to HDCP re-authentication, and eliminating

access to execute many commands including status, change,

video stream interruption to existing HDMI signal paths. The

disconnect, local presets, global presets, front panel lock and

system is pre-loaded with the most common EDID (Extended

unlock, and more

Display Identification Data) settings to ensure proper functionality

• Front panel security lockout

with source devices, and allows specialized EDID settings to be

• Ships with free AutoPatch matrix switcher configuration software

loaded on each input through the included EDID Programmer

• Ships with free APControl to provide easy single-user PC control of the matrix switcher

application.

• Includes AutoPatch’s remote link for direct connect with COMMON APPLICATION

AutoPatch remote panels and SBC control pads

The Optima 8x8 HDMI Matrix Switcher is premium, true matrix

• Rack mounting ears included

switching solution for complete distribution of high resolution

• Backed by our AMX 3 year warranty

digital video and embedded audio from 8 sources to any or

• Local presets allow quick recall of a pre-programmed set of

all 8 connected destinations. Full HDCP support allows 1080p

switches with a single command; multiple presets can exist

protected entertainment content to be switched freely, while

within a system at the same time

high resolution capabilities (1900x1200) provide the additional capability of using this solution to switch high resolution computer

ONLINE www.amx.com/products/Optima_HDMI.asp

images or a combination of both. FEATURES • True 8x8 HDMI Matrix Switching allowing any input to be switched to any or all outputs

M AK I NG T EC HNOLOGY GREEN B y c o nso l i da t i ng m a t ri x s w i t c hi ng a nd i ndi v i dua l d is t a n ce t r a n s p o r t so l ut i o ns f o r e a c h o ut put i n t o a si ngl e sy st e m , a l o n g wit h c o n s o l i d a t i n g p o w e r b y s e n d i n g i t t o r e c e i v e r s o v e r U T P, w e r e d u c e o v e ra l l si z e a nd de m a nd w hi l e pro v i di ng t he sy st em r e q u ir e m e n t s .

• HDMI 1.3 Compatible • Fully HDCP Compliant • AMX HDCP InstaGate® Technology for low-latency switching of HDCP protected content • Supports computer video up to 1900x1200 • Supports HDTV up to 1080p • Pre-loaded with the most common EDID settings to ensure proper functionality with source devices

HELP FUL HI NT The Optima 8x8 HDMI matrix switcher features HCCP InstaGate – A n A M X t e c h n o l o g y t h a t e l i m i n a t e s t h e l a t e n cy o n a l l d i s p l a y s in a system typically experienced when High-Bandwidth Digital Content Protection (HDCP) authenticates High-Definition Multimedia I nt e rf a c e (H DM I ) so urc e a nd de st i na t i o n de v i c e s. T h is t e ch n o lo g y effectively ‘opens the gate’ by pre-authorizing all connected source and destination devices to satisfy HDCP authentication. InstaGate pro v i de s i nt e rrupt i o n-f re e de l i v e r y o f a l l H DM I c on t e n t .

OPTIMA PRE - EN G INEER e d MATRI X S WIT C H ER S

A CLOSER LOOK

Communication Status L ight HD MI Input Co n n ecto r s

Syst em St a t us Indi ca t o r Li ght

HDM I M atr i x Ou tp u t C o n n ecto r s

USB Por t Po wer Recep tacle

Enclos u r e Li n k Po r t (for linkin g Au to Patch encl o s u r es )

RS -2 3 2 C o n tr o l Po r t

OPTIMA PRE - EN G INEER e d MATRI X S WIT C H ER S

SPECIFICATIONS GENERAL

• AC Power: 100-240 VAC single phase, 50-60 Hz • Power Consumption (Max): 160 Watts, fully loaded enclosure • Power Consumption (Typ): 100 Watts, fully loaded enclosure • BTU/HR (Max): 546 • BTU/HR (Typ): 341 • Operational Temperature: 32° to 110° F (0° to 43° C) • Humidity: 0 to 90% non-condensing DIMENSIONS (WITH RACK EARS)

• 3 1/2” x 19” x 12” (8.9 cm x 48 cm x 30.5 cm) • RU: 2 DIMENSIONS (WITHOUT RACK EARS)

• 3 1/2” x 17 3/8” x 12” (8.9 cm x 44.2 cm x 30.5 cm) • RU: 2 WEIGHT

Appx. 10 lbs (4.54 kg) per loaded enclosure MTBF

92,000 Hours CERTIFICATIONS

CE, UL, cUL HDMI VIDEO - 8x8 HDMI

• Data Rate (Max): 1.65 Gbps • Pixel Clock (Max): 165 MHz • Resolution Support: Up to 1920x1200 @ 60 Hz including 1920x1080 @ 60 Hz • Signal Type: HDMI • DDC/EDID Support - EDID Provided by the Optima - EDID is user programmable • HDCP Support: Yes, full matrix HDCP support (includes any input to any or all outputs) • Input Voltage (Nominal): 1.0 Vpp Differential • Input Voltage (Max): 1.5 Vpp Differential • Output Re-clocking (CDR): Yes • Output: +5V DDC Pin • Output Rise Time / Fall Time: - 75 ps min - 144 ps max (20% - 80%) - 12 UI min - 24 UI max (@ 1.65 Gbps, 20% - 80%) • Connectors: HDMI Female

MO D ULAR MATRI X S WIT C H ER S

Analog | Digital Vid e o

Epica DGX 32 Customizable Matrix Switchers Mid-size Single Strand Multimode Fiber Matrix Switching has Never Been Easier

OVERVIEW The ability to route and transmit pure high resolution analog and DVI video up to 6,000 feet makes the new Epica DGX 32 Custom Matrix Switcher the perfect solution for digital signage, campus environments, command-and-control, or anywhere the complex issues of distance, security and perfect video all need to be met without compromise.

• Supports uncompressed video resolutions up to 1920 x 1200 @ 60Hz, including 1080p with a full 4.95 Gbps optical transmission data rate providing lossless pixel for pixel reproduction • Provides additional power on every DVI output commonly used to power external DVI extenders • Pre-loaded with the most common EDID settings on each of the matrix switcher’s input connectors to emulate the display’s response when queried, which ensures transmission of the video

And, when partnered with the DGX Fiber Transmitters and Receivers the system can also pass audio and control sent from the TX through the matrix switcher to the RX. The DGX Fiber

from the source device • Custom EDID settings can be loaded on each input with the use of the included EDID Programmer

Receivers (both HD-15 and DVI) feature SmartScale™ technology

• Supports matrix switching of embedded digital or analog audio

automatically responding the display’s declared EDID information

and one-way control when used in conjunction with any DGX

and scaling the video resolution and adjusting the video

Fiber TX / RX pair running through the Epica DGX 32 SC Fiber

parameters for that display. CUSTOM REQUEST AMX manufacturers a full range of customizable matrix switchers to accommodate multiple signal types in various input/output ranges. Complete our custom request form today and an AMX Representative will respond to you within one business day with a custom quote. If you require immediate assistance please contact us at 800.222.0193 (US) or 469.624.7400 (International). FEATURES • Designed for use with single strand multimode fiber; the most common, easily terminated and installed fiber cable solution

Input and Output Boards • Standard Integrated RS-232 and TCP/IP control • Includes intuitive front mounted control panel featuring LED backlit LCD and blue light buttons, allowing quick and easy access to execute many commands including status, change, disconnect, local presets, global presets, front panel lock and unlock, and more • Native NetLinx Device • Device Discovery enabled • Backed by AMX Limited Lifetime Warranty ONLINE www.amx.com/products/EpicaDGX32-Custom.asp

• Customizable with any combination of DGX Fiber input boards, local DVI input boards, DGX Fiber output boards or local DVI output boards up to 32 inputs and 32 outputs • Use in conjunction with our new DGX Fiber Transmitters and

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ Epi c aDG X 3 2 -C us tom . as p a nd cl i c k o n t he “Tra i ni n g ” t a b .

Receivers to send video, audio and one-way control over a single fiber cable up to 6,000 feet ( 3,000 feet to the matrix switcher and 3,000 feet after the matrix switcher) • DGX Technology provides a common signal transport and matrix switching layer that transcodes between analog and digital signals

DGX The e x cl usi v e di gi t a l pl a t f o rm de l i v e re d by o ur DGX Te ch n o lo g y a llo ws multiple high-resolution signal styles to be converted freely internal to t he m a t ri x s w i t c he r t o num e ro us o ut put s w i t h v a r io u s s t yle s . In a d d it io n , DGX fiber products integrate the ability to receive and/or transmit signals di re c t l y v i a S C f i be r c o nne c t i o ns.

EPI C A D G X 3 2 MO D ULAR MATRI X S WIT C H ER S

SPECIFICATIONS GENERAL

DIGITAL VIDEO (DVI)

• AC Power: 100-240 VAC single phase, 50-60 Hz • Power Consumption (Max): 785 Watts • Power Consumption (Typ): 390 Watts, fully loaded enclosure • BTU/HR (Max): 2679 • BTU/HR (Typ): 1331, fully loaded enclosure • Operational Temperature: 32° to 113° F (0° to 45° C) • Humidity: 0 to 90% non-condensing

• Signal Type: DVI-D (Single Link) • Resolution Support: 640x480 @ 60 Hz up to 1920x1200 @ 60Hz • Data Rate (max): 4.95 Gbps • Pixel Clock (max): 165 MHz • DDC/EDID Support: EDID provided by Epica DGX 32 • EDID is user reprogrammable • HDCP Support: No • Input Voltage (nominal): 1.0 Vpp Differential • Input Cable Equalization: Up to 50 ft. • Output Nominal Voltage: 1.0 Vpp Differential • Output Reclocking: Yes • Output Pre-emphasis: Yes, for improved cable drive • Output +5V DDC Pin: 250 mA • Output Rise Time / Fall Time: - 80 ps min - 200 ps max (20% - 80%) - 0.13 UI min - 0.33 UI max (@ 1.65 Gbps, 20% - 80%) • Connector: DVI-I (DVI-D Single Link is the supported signal type)

DIMENSIONS (HWD) WITH RACK EARS

• 10 1/2” x 19” x 20 1/8” (26.54 cm x 48.26 cm x 51 cm) • RU: 6 WEIGHT

• Appx. 60 lbs (27.2 kg) per loaded enclosure • Shipping Weight: Appx. 70 lbs (31.8 kg) per loaded enclosure SC FIBER

• Compatible AutoPatch Fiber Modules: DGX DVI TX/RX, DGX HD-15 TX/RX , Epica DGX 32, Epica DGX 144 • Signal Types over Fiber: Video, Audio, Serial Data (Video signal must be present to pass Audio and Serial Data) • Resolution Support: 640x480 @ 60 Hz up to 1920x1200 @ 60 Hz • Audio Support: Analog Stereo or S/PDIF (S/PDIF up to 96 kHz Sample Rate, 96 kHz audio only available when source video resolution is 800x600 @ 60Hz(40 MHz pixel clock) or greater, otherwise 48 kHz max) • Serial Data Support: Unidirectional RS-232, up to 115.2k Baud • Fiber Cable Type: Multimode Simplex (with SC termination) 50/125 µm (preferred) or 62.5/125 µm • Fiber Cable Length: - U p to 3000 ft In / Out with 50um cable (3000 ft cable requires 50/125 µm OM2 class low loss fiber cable) - U p to 1500 ft In / Out with 62.5um • Fiber Connector: SC Optical

EDID

• Standard Timing Identification: - ID 1: 1920 x 1200 @ 60 Hz* - ID 2: 1920 x 1080 @ 60 Hz* - ID 3: 1680 x 1050 @ 60 Hz - ID 4: 1600 x 1200 @ 60 Hz - ID 5: 1280 x 800 @ 60 Hz - ID 6: 1280 x 720 @ 60 Hz - ID 7: 1280 x 1024 @ 60 Hz - ID 8: 640 x 480 @ 120 Hz * Included in the detailed timing block with reduced sync blanking • Established Timing: - 720 x 400 @ 70 Hz, 88 Hz - 640 x 480 @ 60 Hz, 67 Hz, 72 Hz, 75 Hz - 800 x 600 @ 56 Hz, 60 Hz, 72 Hz, 75 Hz - 832 x 624 @ 75 Hz - 1024 x 768 @ 60 Hz, 70 Hz, 75 Hz, 87 Hz - 1280 x 1024 @ 75 Hz - 1152 x 870 @ 75 Hz

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

DGX-DVI-Fiber TX DGX-DVI-Fiber RX DGX-HD-15-Fiber TX DGX-HD-15-Fiber RX CBL-FIBER-MM-SC-SC

DGX DVI Fiber Transmitters Back Cover for the CB-TP5i Wallbox DGX HD-15 Fiber Transmitters DGX HD-15 Fiber Receiver SC-SC Single Strand Multimode Fiber Cable (25-1000 ft.)

(FG1010-210-01) (FG1010-410-01) (FG1010-200-01) (FG1010-400-01) (CBL-FIBER-MM-SC-SC)

www.amx.com/products/DGX-DVI-Fiber.asp www.amx.com/products/DGX-DVI-Fiber.asp www.amx.com/products/DGX-HD15-Fiber.asp www.amx.com/products/DGX-HD15-Fiber.asp www.amx.com/products/SC-SC-Fiber-Cable.asp

84 84 86 86

MO D ULAR MATRI X S WIT C H ER S

Analog | Digital V i de o

Epica DGX 144 Customizable Matrix Switchers Large-scale Single Strand Multimode Fiber Matrix Switching has Never Been Easier

OVERVIEW AMX introduces the Epica DGX 144 matrix switching system; ideal for facility or campus-wide distribution of high resolution video in casinos, government agencies, universities, hospitals, retail environments and much more. Start with our compact 16 RU enclosure and select between DGX Fiber Input boards, DGX Fiber Outputs boards, local DVI Input boards, local HD-15 Input boards, and local HD-SDI Input boards. The system converts, switches, and transports any input to any DGX fiber output regardless of signal style. The result is a system perfectly designed to meet the demands of video clarity, long distance and security without compromise. CUSTOM REQUEST AMX manufacturers a full range of customizable matrix switchers to accommodate multiple signal types in various input/output ranges. Complete our custom request form today and an AMX Representative will respond to you within one business day with a custom quote. If you require immediate assistance please contact us at 800.222.0193 (US) or 469.624.7400 (International). FEATURES • Designed for use with single strand multimode fiber; the most common, easily terminated and installed fiber cable solution • Customizable in input / output ranges from 16x16 to 144x144 • Use in conjunction with our new DGX Fiber Transmitters and Receivers to send video, audio and one-way control over a single fiber cable up to 6,000 feet (3,000 feet to the matrix switcher and 3,000 feet after the matrix switcher) • DGX Technology provides a common signal transport and matrix switching layer that transcodes between analog and digital signals • Compatible DGX Fiber Receivers feature SmartScale™ Technology which automatically responds to the display’s declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup • Supports uncompressed video resolutions up to 1920 x 1200 @ 60Hz, including 1080p with a full 4.95 Gbps optical transmission data rate providing lossless pixel for pixel reproduction • Conforms to HD-SDI SMPTE standards including SMPTE-259M and SMPTE-292M • HD-SDI systems / boards can also route SD-SDI 60

• HD-SDI boards support CDR (Clock Data Recovery) • HD-SDI boards provide cable equalization up to 400m • True uncompressed DVI digital matrix switching ensures the purity of the digital image is never compromised • Pre-loaded with the most common EDID settings on each of the matrix switcher’s input connectors to emulate the display’s response when queried, which ensures transmission of the video from the source device • Custom EDID settings can be loaded on each input with the use of the included EDID Programmer • Supports matrix switching of embedded digital or analog audio and one-way control when used in conjunction with any DGX Fiber TX / RX pair running through the Epica DGX 144 SC Fiber Input and Output Boards • Standard RS-232 control port • Standard USB (mini-B) port can be used as a virtual Com port for serial communication with a PC during system setup and upgrades • Supports AutoPatch’s simple BCS serial control protocol • Optional TCP/IP control via external APWeb module • Ships with free AutoPatch matrix switcher configuration software • Ships with free APDiagnostics software that monitors, displays, and collects advanced diagnostic information • Ships with free APControl to provide easy single-user PC control of the matrix switcher • Rack mounting ears integral to product design • Backed by AMX Limited Lifetime Warranty ONLINE www.amx.com/products/EpicaDGX144.asp T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro gra m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t www. a mx.c o m/ p r o d u c t s/ Epi c aDG X 1 4 4 . as p a nd cl i c k o n t he “Tra i ni ng” t a b.

DGX The e x cl usi v e di gi t a l pl a t f o rm de l i v e re d by o ur DG X Tech n o lo g y a llo w s multiple high-resolution signal styles to be converted freely internal to t he m a t ri x s w i t c he r t o num e ro us o ut put s w i t h v a ri o us s t yle s . In a d d it io n , DGX fiber products integrate the ability to receive and/or transmit signals di re c t l y v i a S C f i be r c o nne c t i o ns.

EPI C A D G X 1 4 4 MO D ULAR MATRI X S WIT C H ER S

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

DGX-DVI-Fiber TX DGX-DVI-Fiber RX DGX-HD-15-Fiber TX DGX-HD-15-Fiber RX CBL-FIBER-MM-SC-SC

DGX DVI Fiber Transmitters Back Cover for the CB-TP5i Wallbox DGX HD-15 Fiber Transmitters DGX HD-15 Fiber Receiver SC-SC Single Strand Multimode Fiber Cable (25-1000 ft.)

(FG1010-210-01) (FG1010-410-01) (FG1010-200-01) (FG1010-400-01) (CBL-FIBER-MM-SC-SC)

84 84 86 86

EPI C A D G X 1 4 4 MO D ULAR MATRI X S WIT C H ER S

SPECIFICATIONS GENERAL

• AC Power: 100-240 VAC single phase, 50-60 Hz • Power Consumption (Max): 1563 Watts • Power Consumption (Typ): 850 Watts, fully loaded enclosure • BTU/HR (Max): 5333 • BTU/HR (Typ): 2900, fully loaded enclosure • Operational Temperature: 32° to 110° F (0° to 43° C) • Humidity: 0 to 90% non-condensing • Approvals (Pending): UL, cUL, RoHS

RGBHV (HD-15) • Signal Type: RGBHV Input • Resolution Support: 640x480 @ 60 Hz up to 1920x1200 @ 60Hz • Pixel Clock (max): 165 MHz • DDC/EDID Support: EDID provided by Epica DGX 144 • EDID is user reprogrammable • RGB in Signal Level Range: 0 - 700 mVpp (0 - 750 mVpp max) • RGB Input Impedance: 75 Ohms • HV Sync Input Signal Range: 0 to +5 V • HV Sync Input Impedance: 510 Ohms • HV Sync Input Trigger Voltage: + 1.25 V • Input Connector: HD-15

DIMENSIONS (HWD) WITH MOUNTING EARS

• 28” x 19” x 21 1/8” (71.1 cm x 48.26 cm x 53.6 cm) • RU: 16 WEIGHT

• Appx. 160 lbs per loaded enclosure (72.6 kg) • Shipping Weight: Appx. 205 lbs (93 kg) per loaded enclosure SC FIBER

• Compatible AutoPatch Fiber Modules: DGX DVI TX/RX, DGX HD-15 TX/RX , Epica DGX 32, Epica DGX 144 • Signal Types over Fiber: Video, Audio, Serial Data (Video signal must be present to pass Audio and Serial Data) • Resolution Support: 640x480 @ 60 Hz up to 1920x1200 @ 60 Hz • Audio Support: Analog Stereo or S/PDIF (S/PDIF up to 96 kHz Sample Rate, 96 kHz audio only available when source video resolution is 800x600 @ 60 Hz(40 MHz pixel clock) or greater, otherwise 48 kHz Max) • Serial Data Support: Unidirectional RS-232, up to 115.2 k Baud • Fiber Cable Type: Multimode Simplex (with SC termination) 50/125 µm (preferred) or 62.5/125 µm • Fiber Cable Length: - U p to 3000 ft In / Out with 50um cable (3000 ft cable requires 50/125 µm OM2 class low loss fiber cable) Up to 1500 ft In / Out with 62.5um - U p to 1500 ft In / Out with 62.5um • Fiber Connector: SC Optical DIGITAL VIDEO (DVI)

• Signal Type: DVI-D Input (Single Link) • Resolution Support: 640x480 @ 60 Hz up to 1920x1200 @ 60Hz • Data Rate (max): 4.95 Gbps • Pixel Clock (max): 165 MHz • DDC/EDID Support: EDID provided by Epica DGX 144 • EDID is user programmable • Input Voltage (nominal): 1.0 Vpp Differential • Input Cable Equalization: Up to 50 ft • HDCP Support: No • Input Connector: DVI-I (DVI-D Single Link is the supported signal type) EDID DVI

• Standard Timing Identification: - I D 1: 1920 x 1200 @ 60 Hz* - ID 2: 1920 x 1080 @ 60 Hz* - I D 3: 1680 x 1050 @ 60 Hz - I D 4: 1600 x 1200 @ 60 Hz - ID 5: 1280 x 800 @ 60 Hz - ID 6: 1280 x 720 @ 60 Hz - I D 7: 1280 x 1024 @ 60 Hz - I D 8: 640 x 480 @ 120 Hz * Included in the detailed timing block with reduced sync blanking • Established Timing: - 7 20 x 400 @ 70 Hz, 88 Hz - 640 x 480 @ 60 Hz, 67 Hz, 72 Hz, 75 Hz

- 800 x 600 @ 56 Hz, 60 Hz, 72 Hz, 75 Hz - 832 x 624 @ 75 Hz - 1024 x 768 @ 60 Hz, 70 Hz, 75 Hz, 87 Hz - 1280 x 1024 @ 75 Hz - 1152 x 870 @ 75 Hz

EDID RGBHV

• Standard: SMPTE 259M-C (SD-SDI), SMPTE 292M (HD-SDI) • Bit Rates: 270 Mbps, 1.485 Gbps • Data Type :8 bit or 10 bit • Input Level (max): 0.8 Vpp, ±10% • Input Impedance: 75 Ohms • Rise and Fall Time: <750 ps, ±100 ps (20%-80%) • Auto Cable Equalization: - Up to 400m of Belden 1694A or equivalent @ 270 Mbps - Up to 280m of Belden 8281 or equivalent @ 270 Mbps - Up to 200m of Belden 1694A or equivalent @ 1.485 Gbps - Up to 100m of Belden 8281 or equivalent @ 1.485 Gbps • Input Connectors: BNC • Auto Data Rate Lock: Yes • Resolutions Supported SMPTE 259M-C: - 480i (525) @ 59.94 Hz - 576i (625) @ 50 Hz • Resolutions Supported SMPTE 292M: - 720p @ 60 Hz, 59.94 Hz, 50 Hz, 30 Hz, 29.97 Hz, 25 Hz, 24 Hz, 23.98 Hz - 1080i @ 60 Hz, 59.94 Hz, 50 Hz - 1080p @ 30 Hz, 29.97 Hz, 25 Hz, 24 Hz, 23.98 Hz - 1080PsF @ 24 Hz, 23.98 Hz Note 1: The passing of ancillary data, including audio, is not supported.

distributed audio

Distributed Audio Kits Tango Distributed Audio Kits OVERVIEW 4-Zone Distributed Audio Kits with Wall/Flush Mount Touch Panel

DAS-AHS-04-BL DAS-AHS-04-WH

Black Keypads/Bezel White Keypads/Bezel

(FG1103-101K-BL) (FG1103-101K-WH)

www.amx.com/products/DAS-AHS-04.asp www.amx.com/products/DAS-AHS-04.asp

OVERVIEW 4-Zone Distributed Audio Kits with Speakers and Wall/Flush Mount Touch Panel

DAS-AHS-04S-BL DAS-AHS-04S-WH

Black Keypads/Bezel with Speakers White Keypads/Bezel with Speakers

(FG1103-201K-BL) (FG1103-201K-WH)

www.amx.com/products/DAS-AHS-04S.asp www.amx.com/products/DAS-AHS-04S.asp

OVERVIEW 8-Zone Distributed Audio Kits with Wall/Flush Mount Touch Panels

DAS-AHS-08-BL DAS-AHS-08-WH

Black Keypads/Bezel White Keypads/Bezel

(FG1103-102K-BL) (FG1103-102K-WH)

www.amx.com/products/DAS-AHS-08.asp www.amx.com/products/DAS-AHS-08.asp

OVERVIEW 8-Zone Distributed Audio Kits with Speakers and Wall/Flush Mount Touch Panels

DAS-AHS-08S-BL DAS-AHS-08S-WH

Black Keypads/Bezel with Speakers White Keypads/Bezel with Speakers

(FG1103-202K-BL) (FG1103-202K-WH)

www.amx.com/products/DAS-AHS-08S.asp www.amx.com/products/DAS-AHS-08S.asp

OVERVIEW 4-Zone Distributed Audio Kits with Wireless Touch Panel

DAS-AHS-04W-BL DAS-AHS-04W-WH

Black Keypads/Touch Panel White Keypads/Touch Panel

(FG1103-103K-BL) (FG1103-103K-WH)

www.amx.com/products/DAS-AHS-04W.asp www.amx.com/products/DAS-AHS-04W.asp

Distributed audio

OVERVIEW 4-Zone Distributed Audio Kits with Speakers and Wireless Touch Panel

DAS-AHS-04WS-BL DAS-AHS-04WS-WH

Black Keypads/Touch Panel with Speakers White Keypads/Touch Panel with Speakers

(FG1103-203K-BL) (FG1103-203K-WH)

www.amx.com/products/DAS-AHS-04WS.asp www.amx.com/products/DAS-AHS-04WS.asp

OVERVIEW 8-Zone Distributed Audio Kits with Wireless Touch Panels

DAS-AHS-08W-BL DAS-AHS-08W-WH

Black Keypads/Touch Panel White Keypads/Touch Panel

(FG1103-104K-BL) (FG1103-104K-BL)

www.amx.com/products/DAS-AHS-08W.asp www.amx.com/products/DAS-AHS-08W.asp

OVERVIEW 8-Zone Distributed Audio Kits with Speakers and Wireless Touch Panels

DAS-AHS-08WS-BL DAS-AHS-08WS-WH

Black Keypads/Touch Panel with Speakers White Keypads/Touch Panel with Speakers

(FG1103-204K-BL) (FG1103-204K-BL)

www.amx.com/products/DAS-AHS-08WS.asp www.amx.com/products/DAS-AHS-08WS.asp

distributed audio

DAS-AHS-POP AMXhome Distributed Audio Dealer Showroom Display Kit (FG1103-POP1K)

OVERVIEW This display offers a simple way for the end user to select a

• All required power supplies, cabling and instructions, including:

pre-packaged solution that will meet just about any distributed

- 1 PSN4.4: 13.5 VDC, 4.4 A Power Supply with 3.5 mm Phoenix

audio need, while at the same time simplifying the distributed

Connector FG423-45

audio sales process for the dealer. It was created for placement in

- 1 PS-POE-AF: PoE Injector FG423-80

dealer showrooms and offices as a stand-alone table top unit that

- 1 PSN2.8: 13.5 VDC, 2.8 A Power Supply with 3.5 mm Phoenix

includes all of the components to allow an end user to see, touch

Connector FG423-17

and operate a working system – just like it was in their home. This

- 1 CC-232: Standard RS-232 Cable FG10-752-04

includes a working touch panel, keypads, speakers and a Tango

- 1 CC: 4-pin Female to 4-Pin Female Cable FG10-027-10

Audio Controller and NetLinx Central Controller driving the

- 1 CC-NET: Ethernet Cable FG10-051-10

system. Also included are AMXhome Distributed Audio brochures

- 1 Installation Guide

that the end-user can reference for more details or take away to think about.

Not intended for resale.

KIT INCLUDES

ONLINE www.amx.com/products/DAS-AHS-POP.asp

• 1 AMXhome Plexiglas Dealer Display • 50 AMXhome Solutions Tri-fold Brochures with Holder • 1 DAS-T0804-SIG: Tango 8-Source, 4-Zone Audio Controller FG1103-01 • 1 NXD-500i: 5” Modero Wall/Flush Mount Touch Panel with Intercom FG2261-02 • 1 NXD-BEZ-500I-BL: Bezel Kit for NXD-500i FG2261-34 (Black) • 1 NI-700: NetLinx Integrated Controller, FG2105-70 • 1 MET-6N-BL: Metreau 6-Button Keypad with Navigation FG5794-01-BL (Black) • 1 ALD-CW-1-BL: 1-Gang Claro Wallplate FG2605-81-BL (Black) • 2 SPK-C-DT8: 8” Ceiling Speakers FG1130-13 • 1 DVD/CD Player

INTRO D U C TION H D MI

Partnerships Don’t Get This Good HDMI Switching + UT Pro Distribution: Even We Get Choked Up at the Possibilities When you need true HDMI matrix switching and economical UTP distribution, the new HDMI UTPro Switching Solutions deliver crisp, beautiful 1080p, HDCP compliant content anywhere. Whether your display is in the family room or down the hall, your sources can be distributed to a variety of locations even in remote destinations. And our exclusive AMX InstaGate technology effectively opens the HDCP gate by pre-authenticating connected devices for interruption-free delivery of your content.

SYSTEM DIAGRAM

INTRO D U C TION H D MI

To Infinity and Be y ond! Well not exactly but you c a n a d d up to three HDMI UTPro Re p e a t e r s and significantly extend th e r e a c h of your HD content – up to 1 0 0 additional meters over the s a m e standard UTP cabling. Lea r n m o r e i n th i s Se cti o n o r vi si t: w w w.amx .c om/ pr oduc ts / HDM I UTPRO-RPT.as p

H D MI

HDMI Digital Video

AVS-OP-0808-JD0 8x8 Digital Video with HDMI Matrix Switcher (FGP46-0808-JD0)

• Features our EDID Programmer allowing specific display EDID

OVERVIEW The Optima 8x8 HDMI Matrix Switcher is fully HDCP compliant

settings to be custom loaded on each input

and designed to route and distributed high-resolution HDMI

• Standard RS-232 control port

signals to multiple displays while maintaining a true, digital

• Supports AutoPatch’s simple BCS serial control protocol

signal. While supporting resolutions up to 1900x1200 (including

• Optional TCP/IP control via external APWeb module

1920x1080p), this true matrix switching solution features AMX’s

• Includes intuitive CP-15 front mounted control panel featuring

HDCP InstaGate® technology allowing HDMI signal switching

LED backlit LCD and blue light buttons, allowing quick and easy

without delays due to HDCP re-authentication, and eliminating

access to execute many commands including status, change,

video stream interruption to existing HDMI signal paths. The

disconnect, local presets, global presets, front panel lock and

system is pre-loaded with the most common EDID (Extended

unlock, and more

Display Identification Data) settings to ensure proper functionality

• Front panel security lockout

with source devices, and allows specialized EDID settings to be

• Ships with free AutoPatch matrix switcher configuration software

loaded on each input through the included EDID Programmer

• Ships with free APControl to provide easy single-user PC control of the matrix switcher

application.

• Includes AutoPatch’s remote link for direct connect with COMMON APPLICATION

AutoPatch remote panels and SBC control pads

The Optima 8x8 HDMI Matrix Switcher is premium, true matrix

• Rack mounting ears included

switching solution for complete distribution of high resolution

• Backed by our AMX 3 year warranty

digital video and embedded audio from 8 sources to any or

• Local presets allow quick recall of a pre-programmed set of

all 8 connected destinations. Full HDCP support allows 1080p

switches with a single command; multiple presets can exist

protected entertainment content to be switched freely, while

within a system at the same time

high resolution capabilities (1900x1200) provide the additional capability of using this solution to switch high resolution computer

ONLINE www.amx.com/products/Optima_HDMI.asp

images or a combination of both. FEATURES • True 8x8 HDMI Matrix Switching allowing any input to be switched to any or all outputs

AV S - OP - 0 8 0 8 - J D 0 H D MI

A CLOSER LOOK

Communication Status L ight HD MI Input Co n n ecto r s

Syst em St a t us Indi ca t o r Li ght

HDM I M atr i x Ou tp u t C o n n ecto r s

USB Por t Po wer Recep tacle

Enclos u r e Li n k Po r t (for linkin g Au to Patch encl o s u r es )

RS -2 3 2 C o n tr o l Po r t

AV S - OP - 0 8 0 8 - J D 0 H D MI

SPECIFICATIONS GENERAL

• 3 1/2” x 19” x 12” (8.9 cm x 48 cm x 30.5 cm) • RU: 2 DIMENSIONS (WITHOUT RACK EARS)

• 3 1/2” x 17 3/8” x 12” (8.9 cm x 44.2 cm x 30.5 cm) • RU: 2 WEIGHT

Appx. 10 lbs (4.54 kg) per loaded enclosure MTBF

92,000 Hours CERTIFICATIONS

CE, UL, cUL HDMI VIDEO - 8x8 HDMI

H D MI

HDMI-UTPRO-0808 HDMI-UTPro 8x8 Matrix Switcher, UTP Distribution Kit (FG1047-88K)

OVERVIEW

KIT INCLUDES

When you need true matrix switching of up to 8 HDMI sources,

• 8x8 HDMI Matrix Switcher, outputs feed UTPro transport HDMI

whether locally or over long distances, the new HDMI UTPRO

input connectors

Matrix Switching and Distribution Solution is ideal for getting

• 8 position UTPro transport with HDMI inputs and UTP outputs

the job done crisply, cleanly and it’s fully HDCP compliant. And

• UTP Receivers per system

unlike typical HDMI switchers, AMX HDCP InstaGate technology

• 8 short run HDMI cables used to feed UTP transport

allows for HDMI signal switching without delays due to HDCP re-authentication, and eliminates video stream interruption to

ONLINE www.amx.com/products/HDMI-UTPRO-0808.asp

existing HDMI signal paths. COMMON APPLICATION Whether your displays are across the room, on the other side of the house or in a classroom down the hall, your sources can be

distributed to up to 8 different displays located remotely. For even longer runs in auditoriums or houses of worship, just add an HDMI UTPRO Repeater to extend signal distances. And since UTPRO signals are carried over commonly available Unshielded Twisted Pair (UTP) cable, they are also extremely cost effective solutions to install.

HELP FUL HI NT U TPro si gna l s e f f e c t i v e l y e x t e nd H DM I si gna l s w i t h H D C P s u p p o r t a n d a dde d Na t i v e Ne t L i nx c o nt ro l t o di st a nc e s o f 1 0 0 f e e t a n d b e yo n d o v e r c o st e f f e c t i v e U TP c a bl i ng. Opt i o na l U TPro R e p e a t e r s ca n b e added before the UTPro Receivers to extended this distance even f u r t h e r. I n f o r m a t i o n o n t h e U T P r o R e p e a t e r s c a n b e f o u n d i n t h e R e c o m m e nde d A c c e sso ri e s be l o w.

FEATURES • True 8x8 HDMI Matrix Switching allowing any input to be switched to any or all outputs • HDMI 1.3 Compatible • Fully HDCP Compliant • AMX HDCP InstaGate® Technology for low-latency switching of HDCP protected content • HDMI Distribution over UTP cable • Native NetLinx Device • Supports computer video up to 1900x1200 • Supports HDTV up to 1080p • Complete integration of Audio, Video and Control • EDID Management

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

HDMI-UTPRO-RPT

HDMI-UTPro Repeater

(FG1403-21-XX)

www.amx.com/products/HDMI-UTPRO-RPT.asp 73

H D MI - UTPRO - 0 8 0 8 H D MI

A CLOSER LOOK

RS-2 3 2 Swi t cher C o n t rol Port (fed from RJ-1 2 Swi t ch C o nt ro l Po rt )

HD MI Input Con n ecto r s

Po wer R ecept acle Net Li nx E t her net C o nnec tion System Communications Status LED s

HDM I M atr i x Ou tp u t C o n n ecto r s (feed s UT P r o Tr an s p o r t HDM I I n p u t C o n n ecto r s b el ow)

UT P r o Tr an s p o r t Ou tp u ts (1 “DDC” RJ-45 and 1 “Vi d eo ” RJ-4 5 p er o u tp u t)

U T P r o Tr a n s p o r t H D M I I n p u t C o n n ecto r s (fed fr o m HDM I M atr i x O u t p u t C o n n ecti o n s ab o v e )

Lo cal Ex ter n al Dev i ce S er i al C o n tr o l Po r t R - J - 1 2 S w i t c h C o n t r o l Po r t (feed s RS -2 3 2 S w i tch er C o n tr o l Po r t)

H D MI

HDMI-UTPRO-0808-8RX HDMI-UTPro Receiver (FG1047-88K)

OVERVIEW The HDMI UTPro Receiver is part of the HDMI UTPro Kit (HDMI-UTPRO-0808). This kit includes 8 receivers. ONLINE www.amx.com/products/HDMI-UTPRO-0808-8RX.asp

HDMI-UTPRO-RPT HDMI-UTPro Repeater (FG1403-21)

OVERVIEW

FEATURES

When you need true matrix switching of up to 8 HDMI sources,

• True 8x8 HDMI Matrix Switching allowing any input to be

whether locally or over long distances, the new HDMI UTPRO

switched to any or all outputs

Matrix Switching and Distribution Solution is ideal for getting

• HDMI 1.3 Compatible

the job done crisply, cleanly and it’s fully HDCP compliant. And

• Fully HDCP Compliant

unlike typical HDMI switchers, AMX HDCP InstaGate® technology

• AMX HDCP InstaGate® Technology for low-latency switching of

allows for HDMI signal switching without delays due to HDCP

HDCP protected content

re-authentication, and eliminates video stream interruption to

• HDMI Distribution over UTP cable

existing HDMI signal paths.

• Native NetLinx Device • Supports computer video up to 1900x1200

COMMON APPLICATION

• Supports HDTV up to 1080p

Whether your displays are across the room, on the other side of

• Complete integration of Audio, Video and Control

the house or in a classroom down the hall, your sources can be

• EDID Management

distributed to up to 8 different displays located remotely. For even longer runs in auditoriums or houses of worship, just add an HDMI

ONLINE www.amx.com/products/HDMI-UTPRO-RPT.asp

UTPRO Repeater to extend signal distances. And since UTPRO signals are carried over commonly available Unshielded Twisted Pair (UTP) cable, they are also extremely cost effective solutions to install.

UTP

UDM-0808-SIG-8RX02N UDM-0808 Distribution Hub and UDM-RX02N Receiver Kit (FG1402-01K)

OVERVIEW

READ M ORE ABOUT I T We i n v i t e y o u t o l e a r n m o r e a b o u t t h e c a p a b i l i t i e s o f u n i v e r s a l di st ri but i o n i n t he w hi t e pa pe r: www. am x . c om /as se t s/ whi teP aper s /A M X . Endel eo. U DM . FA Q. pdf

The UDM-0808-SIG-8RX02N combines the UDM-0808-SIG MultiFormat Distribution Hub and eight UDM-RX02N Receivers. The Signature Series UDM-0808-SIG Multi-format Distribution Hub delivers any video source, including Composite, Component,

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ U DM -0 8 0 8 -S I G -8 R X 0 2 N. as p a nd cl i c k o n t he “Tra in in g ” t a b .

S-Video, and RGB/VGA to up to 32 display devices. Installed at the display device, the UDM-RX02N converts the signal received from the UDM-0808-SIG Multi-Format Distribution Hub to standard audio/video signals. In addition, the UDM-RX02N supports AMX IR(.irl) files, making this a native NetLinx device for control. COMMON APPLICATioN Perfect for a variety of sources such as HDTV Satellite tuners, BluRay DVD players and PCs just to name a few to be displayed in rooms throughout a residence or in classrooms, conference rooms presentation rooms or other commercial applications. KIT INCLUDES • (1) UDM-0808-SIG: Multi-Format Distribution Hub • (8) UDM-RX02N: Multi-Format Receivers ONLINE www.amx.com/products/UDM-0808-SIG-8RX02N.asp

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

UDM-RC05 RS01 IR01 IR03

Multi-Format IR Remote Control RS-232 Serial Transmit Cable IR Emitter Module External IR Receiver Module

(FG1402-70) (FG-RS01) (FG-IR01) (FG-IR03)

www.amx.com/products/UDM-RC05.asp www.amx.com/products/RS01.asp www.amx.com/products/IR01.asp www.amx.com/products/IR03.asp

533 531 532 532

CATALOG CATALOG CATALOG CATALOG

UTP

Stereo l RGBHV CAT5

CatPro TX/RX Modules

A ud io

Vid e o

RGBHV + Stereo AVB-TX-CATPRO-HD15-5T

TX, RGBHV + Stereo Module

(FG1010-45-01)

AVB-RX-CATPRO-HD15-5T RX, RGBHV + Stereo Module

(FG1010-48-01)

OVERVIEW

HELP FUL HI NT S i m pl y push t he di a l a nd t he L ED i l l um i na t e s w i t h t h e co lo r a ct iva t e d for adjustment, then turn the dial for digital skew adjustments up t o 6 2 ns, i n 2 ns i nc re m e nt s. One m o re push o f t h e d ia l a n d t h e L E D i l l um i na t e s w hi t e , i ndi c a t i ng t ha t t he a udi o i s a c t iva t e d f o r d ig it a l v o l um e a dj ust m e nt s f ro m m ut e t o +6 dB r.

Transmit high resolution video transmission over category cable with AMX’s CatPro RGBHV + Stereo Transmitters and Receivers. FEATURES • New space saving V-Style (versatile) module design • Transmits/Receives RGBHV + stereo up to 1,000 feet • Resolutions up to 1600 x 1200 (4:3) and 1920 x 1080 (16:9) • Individual transmitter or receiver modules should be paired or applied in conjunction with AutoPatch Optima or Modula CatPro Card • Power Supply Energy Star® rated to ensure maximum efficiency and savings • Automatically adjusting universal 110 / 220 IEC power supply is included with every unit

Shown here: CatPro RGBHV + Stereo Receiver

• Compatible with UTP and STP category cable • Compatible with V-Style mounting options including rack, surface or pole

A CLOSER LOOK

TRANSMITTER • True stereo audio transmission • Loop through outputs for local video and audio RECEIVER • Active digital skew adjust up to 62ns, in 2ns increments • User controlled stereo digital volume adjustment from mute to +6 dBr • Gain and peak adjustment via potentiometers • Skew and volume control via intuitive user accessible dial ONLINE

www.amx.com/products/VStyle_Cat5_CatPro.asp

C ATPRO T X / R X MO D ULE S UTP

GENERAL

• Maximum Resolution: 1600x1200 (4:3) and 1920x1080p (16:9) @ 60 Hz up to 1000 ft. (305 m) * (*When used with an AMX AutoPatch Distribution Matrix, overall cable length cannot exceed 1,000 ft. (305 m).) • Signal Types: RGBHV & stereo audio, unbalanced • Supported Cable Types: Cat5, Cat5e, Cat6, Cat6e and STP * (*Skew Free cable is NOT recommended.) • Power Consumption (Max): +12 VDC to +24 V DC @ 1.3 A, 31 W • Power Consumption (Typ): +12 VDC to +24 V DC @ 6 W • Power Connector: 2.1 mm DC power jack • BTU/HR (Max): 20 • Operational Temperature: 32° to 110° F (0° to 43° C) • Humidity: 0 to 90% non-condensing

• Audio Local Out - Signal Levels (max): +8 dBu (unity gain) - Frequency Response: <± 0.35 dB, 20 Hz to 20 kHz - THD+N: <0.04 %, 1 kHz, -10 dBu to +4 dBu - SNR: >105 dB, 20 Hz to 20 kHz Vin=+4 dBu - Impedance: <5 Ohms • Connectors - RGBHV In: 1 Female HD-15 - RGBHV Local Out: 1 Female HD-15 - Stereo Audio In: 1 Female 3.5mm mini-stereo jack - Stereo Audio Local Out: 1 Female 3.5mm mini-stereo jack - RGBHV+Stereo Out: 1 Female RJ-45

Dimensions (TX Module)

1.66” x 5.80” x 5.15” (4.22 cm x 14.73 cm x 13.08 cm) Dimensions (RX Module)

1.66” x 4.33” x 5.15” (4.22 cm x 11.00 cm x 13.08 cm) Weight (TX Module)

Appx. 1.5 lbs (.68 kg) Weight (RX Module)

Appx. 1.3 lbs (.68 kg) CERTIFICATIONS

CE,UL, cUL TRANSMITTER

• RGB In - Signal Level Range: +0.75 VDC to -0.3 VDC (terminated) - Impedance: 75 Ohms - Return Loss: <-35 dB @ 5 MHz • RGB Local Out - Signal Level Range: +0.75 VDC to -0.3 VDC (terminated) - Impedance: 75 Ohms - SNR: >65 dB • Sync In - Impedance: 510 Ohms - Polarity: Active high or low • Sync Local Out - Signal Levels: Low = 0 VDC, High = +5 VDC (unterminated) - Polarity: Active high or low (follows input polarity) • Audio In - Signal Levels (max): +8 dBu - Impedance: 2 kOhms

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

AVB-VSTYLE-SURFACE-MNT AVB-VSTYLE-RMK-1U AVB-VSTYLE-RMK-FILL-1U AVB-VSTYLE-POLE-MNT

V-Style Module Surface Mount V-Style Module Tray V-Style Module Tray w/ fill plates V-Style Module Pole Mount

(FG1010-722) (FG1010-720) (FG1010-721) (FG1010-723)

www.amx.com/products/AVB-VSTYLE-SURFACE-MNT.asp www.amx.com/products/AVB-VSTYLE-RMK.asp www.amx.com/products/AVB-VSTYLE-RMK.asp www.amx.com/products/AVB-VSTYLE-POLE-MNT.asp

81 81 81 82

UTP

Stereo l S-Video CAT5

CatPro TX/RX Modules

A ud io

Vid e o

S-Video + Stereo AVB-TX-CAT5-SVID-RCA

Transmitter, S-Video / RCA to Cat5 Module

(FG1010-37-01)

AVB-RX-CAT5-SVID-RCA

Receiver, Cat5 to S-Video / RCA Module

(FG1010-34-01)

AVB-TX-CAT5-SVID-3T-BAL Transmitter, S-Video / 3T Screw Type Balanced Audio to Cat5 Module

AVB-RX-CAT5-SVID-3T-BAL Receiver, Cat5 to S-Video / 3T Screw Type Balanced Audio Module

(FG1010-03-01) (FG1010-00-01)

OVERVIEW Designed to distribute audio and video over Cat5 (5e, 6 .), Our transmitter/receiver modules can be used as either a standalone

A CLOSER LOOK

end-to-end solution or as integrated components of an AutoPatch signal distribution system. FEATURES • New space saving V-Style (versatile) module design • Transmit S-Video + stereo up to 1,000 feet (10 MHz) • 480i @ distances up to 1,000 feet • Choose from balanced or unbalanced audio • Power Supply Energy Star® rated to ensure maximum efficiency and savings • Automatically adjusting universal 110 / 220 IEC power supply is included with every unit • Compatible with the Modula 32x32 Matrix Switcher • Compatible with V-Style mounting options including rack, surface or pole ONLINE www.amx.com/products/VStyle_Cat5_SVideo-Stereo.asp

C ATPRO T X / R X MO D ULE S UTP

GENERAL

• Power Consumption (Max): +12 VDC to +24 VDC @ 1.3 A • Power Connector: 2.1 mm DC power jack (CAT-5 S-Video+Stereo modules use power supplies that are provided with the unit.) • Power AF-10: 120 VAC / 240 VAC • Operational Temperature: 32° to 110° F (0° to 43° C) • Humidity: 0 to 90% non-condensing Dimensions

1.66” x 4.33” x 5.15” (4.22 cm x 11.00 cm x 13.08 cm) Weight

Appx. 1.3 lbs (.06 kg) Supported Cable Types

Category Cable 5, 5e, 6 Signal Types

S-Video (or composite on one BNC or RCA) & stereo audio CERTIFICATIONS

CE,UL, cUL VIDEO

• Bandwidth: All distances up to 1000 ft. (±3 dB) 10 MHz (min.) • Video Crosstalk: f = 5 MHz <-70 dB • T X Level (max.): ±2 V • T X Impedance: 75 ohms • RX Level (max.): ±2 V • RX Impedance: 75 ohms AUDIO

• THD + Noise, unbalanced: f = 20 Hz to 20 kHz, Vin = -10 to +8 dBu <0.01% • THD + Noise, balanced - f = 20 Hz to 20 kHz, Vin = +4 to +22 dBu <0.01% - f = 20 Hz to 20 kHz, Vin = -10 to +22 dBu <0.04% • Crosstalk, unbalanced: f = 1 kHz, Vin = +2 dBu <-90 dB • Crosstalk, balanced: f = 1 kHz, Vin = +20 dBu <-90 dB • T X Level (max.) - Balanced (High Headroom): +22 dBu - Unbalanced (Standard): +8 dBu • T X Impedance: 18 kohms • RX Level (max.) - Balanced (High Headroom): +22 dBu - Unbalanced (Standard): +8 dBu • RX Impedance: 50 kohms

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

AVB-VSTYLE-SURFACE-MNT AVB-VSTYLE-RMK-1U AVB-VSTYLE-RMK-FILL-1U AVB-VSTYLE-POLE-MNT

V-Style Module Surface Mount V-Style Module Tray V-Style Module Tray w/ fill plates V-Style Module Pole Mount

(FG1010-722) (FG1010-720) (FG1010-721) (FG1010-723)

www.amx.com/products/AVB-VSTYLE-SURFACE-MNT.asp www.amx.com/products/AVB-VSTYLE-RMK.asp www.amx.com/products/AVB-VSTYLE-RMK.asp www.amx.com/products/AVB-VSTYLE-POLE-MNT.asp

81 81 81 82

UTP

Stereo l S-Video CAT5

CatPro TX/RX Modules

A ud io

Vid e o

Y/c + Stereo AVB-TX-CAT5-RCA-RCA AVB-RX-CAT5-RCA-RCA AVB-TX-CAT5-BNC-RCA AVB-RX-CAT5-BNC-RCA AVB-TX-CAT5-BNC-3T AVB-RX-CAT5-BNC-3T AVB-TX-CAT5-BNC-3T-BAL AVB-RX-CAT5-BNC-3T-BAL

Transmitter, Cat5 to RCA / RCA Receiver, Cat5 to RCA / RCA Module Transmitter, BNC / RCA to Cat5 Receiver, Cat5 to BNC / RCA Receiver Transmitter, BNC / 3T Screw Type Audio to Cat5 Receiver, Cat5 to BNC / 3T Screw Type Audio Transmitter, BNC/3T Screw Type Balanced Audio to Cat5 Receiver, Cat5 to BNC / 3T Screw Type Balanced Audio

(FG1010-61-01) (FG1010-58-01) (FG1010-49-01) (FG1010-46-01) (FG1010-55-01) (FG1010-52-01) (FG1010-64-01) (FG1010-67-01)

OVERVIEW Designed to transmit composite or Y/c and stereo over category cable, our line of Cat5 Y/c + Stereo Transmitter and Receiver

A CLOSER LOOK

Modules can be used as an end-to-end solution or as integrated components of an AutoPatch signal distribution system. FEATURES • New space saving V-Style (versatile) module design • 480i at distances up to 1,000 feet • Power Supply Energy Star® rated to ensure maximum efficiency and savings • Automatically adjusting universal 110 / 220 IEC power supply is included with every unit • Compatible with the Modula 32x32 Matrix Switcher • Compatible with V-Style mounting options including rack, surface or pole ONLINE

www.amx.com/products/VStyle_CAT5_YC-Stereo.asp

C ATPRO T X / R X MO D ULE S UTP

GENERAL

• Power Consumption (Max): +12 VDC to +24 VDC @ 1.3 A • Power Connector: 2.1 mm DC power jack (CAT-5 Y/c+Stereo modules use power supplies that are provided with the unit.) • Power AF-10: 120 VAC / 240 VAC • Operational Temperature: 32° to 110° F (0° to 43° C) • Humidity: 0 to 90% non-condensing Dimensions

1.66” x 4.33” x 5.15” (4.22 cm x 11.00 cm x 13.08 cm) Weight

Appx. 1.3 lbs (.06 kg) Supported Cable Types

Category Cable 5, 5e, 6 Signal Types

Y/c (or composite on one BNC or RCA) & stereo audio CERTIFICATIONS

CE,UL, cUL VIDEO

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

AVB-VSTYLE-SURFACE-MNT AVB-VSTYLE-RMK-1U AVB-VSTYLE-RMK-FILL-1U AVB-VSTYLE-POLE-MNT

V-Style Module Surface Mount V-Style Module Tray V-Style Module Tray w/ fill plates V-Style Module Pole Mount

(FG1010-722) (FG1010-720) (FG1010-721) (FG1010-723)

www.amx.com/products/AVB-VSTYLE-SURFACE-MNT.asp www.amx.com/products/AVB-VSTYLE-RMK.asp www.amx.com/products/AVB-VSTYLE-RMK.asp www.amx.com/products/AVB-VSTYLE-POLE-MNT.asp

81 81 81 82

UTP

AVB-VSTYLE-SURFACE-MNT V-Style Single Module Surface Mount Brackets (FG1010-722)

OVERVIEW

ONLINE

The V-Style Single Module Surface Mount Brackets provides

www.amx.com/products/AVB-VSTYLE-SURFACE-MNT.asp

secure mounting to flat surfaces. L bracket shape attaches to pre-existing holes on module. Take advantage of the flexible architecture of stand-alone modules with a secure and professional installation. FEATURES • Designed for use with V-Style Transmitter / Receiver, Converter and DA modules • Mount a single module to the wall, under a desk etc. • Bracket screws securely into place on each side of a module • Durable powder coat finished metal

Module Rack Mounting Tray V-Style Module Rack Mounting Tray (No Fill Plates)

AVB-VSTYLE-RMK-1U

(FG1010-720)

(With Fill Plates)

AVB-VSTYLE-RMK-FILL-1U (FG1010-721)

OVERVIEW

SPECIFICATIONS

The V-Style Module Rack Mounting Tray allows various

DIMENSIONS (HWD)

combinations of stand-alone modules to be installed in a 1 RU

• 1.75” x 19” (4.44cm x 48 cm) • RU: 1 • Filler Plates (1 each): 1/12, 1/6, 1/3, 1/4 rack width

space. Take advantage of the flexible architecture of stand-alone modules with a secure and professional rack mounted installation. Fill plates are available for instances when the entire tray is not full. FEATURES • Designed for use with V-Style Transmitter / Receiver, Converter and DA modules • Rack mount 1/3 RW and 1/4 RW modules side by side in a single rack unit • Modules screw securely into place at all four corners • Durable powder coat finished metal • Available with and without blank filler plates ONLINE www.amx.com/products/AVB-VSTYLE-RMK.asp

MSRP

UTP

$45

AVB-VSTYLE-POLE-MNT V-Style Single Module Pole Mounting Kit (FG1010-723)

OVERVIEW

FEATURES

The V-Style Single Module Pole Mounting Kit provides secure

• Designed for use with V-Style Transmitter / Receiver, Converter

mounting to projector pipe or similar types of installations. The U bolt attaches to mounting brackets secured to the side of a module. Take advantage of the flexible architecture of standalone modules with a secure and professional installation.

and DA modules • Mount a single module to projector pipe or similar types of installation • Kit contains all hardware for the assembly ONLINE www.amx.com/products/AVB-VSTYLE-POLE-MNT.asp

F I B ER

DGX DVI Fiber TX/RX Modules Single Fiber Multimode Modules AVB-TX-DGX-DVI-SC-FIBER Transmitter, DVI to Fiber Video, Digital, Analog Stereo (FG1010-210-01) AVB-RX-DGX-SC-FIBER-DVI Receiver, Fiber to DVI Video, Digital, Analog Stereo

(FG1010-410-01)

• Compact enclosure size and compatible with all V-Style versatile mounting options including rack, surface or pole • Backed by our AMX 3 year warranty

fiber, and if you are new to fiber it’s the most common, easily terminated and installed cable solution. Now you too can send

ONLINE

www.amx.com/products/DGX-DVI-Fiber.asp

true, pure, uncompressed DVI, audio and control 3,000 feet and beyond in any environment. SmartScale™ on the Receivers ensures quick or no set-up time by automatically recognizing any device’s supported resolution and signal style parameters. Now you can switch out visiting PCs and

DGX The e x cl usi v e di gi t a l pl a t f o rm de l i v e re d by o ur DG X Te ch n o lo g y a llo w s multiple high-resolution signal styles to be converted freely internal to t he m a t ri x s w i t c he r t o num e ro us o ut put s w i t h v a r io u s s t yle s . In a d d it io n , DGX fiber products integrate the ability to receive and/or transmit signals di re c t l y v i a S C f i be r c o nne c t i o ns.

replacement LCDs without manual setup. FEATURES • Designed for use with a single strand of multimode fiber;

A CLOSER LOOK

the most common, easily terminated and installed fiber cable solution • Send and receive video, audio and one-way control over a single fiber cable up to 3,000 feet • Supports uncompressed video resolutions up to 1920 x 1200 @ 60Hz, including 1080p with a full 4.95 Gbps optical transmission data rate providing lossless pixel for pixel reproduction • The transmitter module is pre-loaded with the most common EDID settings on the DVI input to emulate the display’s response when queried, which ensures transmission of the video from the source device; in addition custom EDID settings can be loaded to the DVI input with the use of the included EDID Programmer • The receiver module features SmartScale™ Technology automatically responds to the display’s declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup • DGX Technology provides a common signal transport and matrix switching layer that transcodes between analog and digital signals; this allows the DGX DVI and HD-15 TX/RX pairs to be used interchangeably

E p i c a D G X D V I F I B ER

SPECIFICATIONS GENERAL

• AC Power: 100-240 VAC single phase, 50-60 Hz; 0.6A @ 115 VAC (Max) • Power Consumption (Max): 12 V, 1.25A (15W) • BTU/HR (Max): 51 • Power Connector: 2.1 mm DC Power Jack • Power Output of Laser Radiation DVI TX (Max): 4.08 mW • Operational Temperature: 32° to 113° F (0° to 45° C) • Humidity: 0 to 90% non-condensing • M TBF: 92,000 hrs • Compatible AutoPatch Fiber Products: - D GX DVI TX/RX; DGX HD-15 TX/RX - Epica DGX 32, Epica DGX 144 • Advanced Configuration Interface: USB Mini-B • Fiber Cable Type: -M ultimode Simplex (with SC termination) - 5 0/125 µm (preferred) or 62.5/125 µm • Fiber Cable Length: - Up to 3000 ft with 50um cable* - Up to 1500 ft with 62.5um cable *3000 ft cable requires 50/125 μm OM2 class low loss fiber cable, transmission distance will vary depending on the type/quality of fiber used, fiber bandwidth, cable bend radius/kinks, splicing quality & quantity, and chromatic or modal dispersion • Optical Budget: 9.75 dBm (Typ) between DGX TX and RX • Optical Modulation Amplitude (OMA): -6.25 dBm (Typ) • Optical Modulation Amplitude (OMA) Sensitivity: -16.0 dBm (Typ) • Fiber Connector: SC Optical DIMENSIONS (HWD)

• 1 5/8” x 5 13/16” x 5 1/8” (4.22 cm x 14.73 cm x 13.08 cm) • RU: 1 WEIGHT

• Approx. 1.75 lbs per loaded enclosure (0.8 kg) • Shipping Weight: Approx. 2.75 lb (1.25 kg)

- DVI Local Out Re-clocking (CDR): Yes - D VI Local Out +5V DDC Pin: 50 mA - DVI Local Out Rise Time / Fall Time: - 75 ps Min - 240 ps Max (20% - 80%) - 0.12 UI Min - 0.4 UI Max (@ 1.65 Gbps, 20% - 80%) - D VI Local Output Connector: DVI-I (DVI-D Single Link is the supported signal type) AUDIO DGX DVI TRANSMITTER

• Input Signal Type: Stereo Analog, S/PDIF (2 Channel L-PCM) • Video signal must be present to pass Audio • Analog Input Level (Max): +8 dBu, unbalanced • Analog Input Impedance: 2K Ohms • S /PDIF Resolution: 16 bit to 24 bit • S /PDIF Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz (96 kHz audio only available when source video resolution is 800x600 @ 60 Hz(40 MHz pixel clock) or greater. Otherwise 48 kHz max.) • S /PDIF Input Signal Level Range: 200 mVpp to 2.5 Vpp terminated • S /PDIF Input Impedance: 75 Ohms • Analog to Digital Reference Level: +8 dBu = 0 dBfs • Optimal Analog Audio Operating Range: -30 dBu to +8 dBu • Optimal Digital Audio Operating Range: -38 dBfs to 0 dBfs • Input Connector: - 3.5 mm Mini-Stereo Jack (Analog Stereo) - RCA Jack (S/PDIF) SERIAL DATA DGX DVI TRANSMITTER

• Input Signal Type: Unidirectional RS-232, the control signal is transmitted in the same direction as Video/Audio. • Signal Type: Video signal must be present to pass Serial Data • Input Signal Level (Max): ± 15V • Baud Rate (Max): 115.2k Baud, 25ft cable • Baud Rate (Typ): 57.6k Baud, 150ft Cable • Input Connector: Pluggable 3.5mm Terminal Block EDID DGX DVI TRANSMITTER

APPROVALS

• Safety Certifications (DVI TX): Class 1 Laser Product (Class 3R Laser Product when fiber is disconnected from the unit) IEC 60825-1, 2001 • CE, UL, cUL, RoHS VIDEO DVI TRANSMITTER / RECEIVER

• Resolution Support: 640x480 @ 60 Hz up to 1920x1200 @ 60 Hz • Data Rate (Max): 4.95 Gbps • Pixel Clock: 25 MHz to 165 MHz • Digital Processing: Video - 24 bit, 165 MHz VIDEO DGX DVI TRANSMITTER

• Input Signal Type: DVI-D Input (Single Link) • DDC/EDID Support: EDID provided by DGX transmitter • EDID is user reprogrammable • HDCP Support: No • Input Voltage (nominal): 1.0 Vpp Differential • Input Connector: DVI-I (DVI-D Single Link is the supported signal type) - D VI Local Out Nominal Voltage: 1.0 Vpp Differential

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

Epica DGX 32 DVI Epica DGX 144 AVB-VSTYLE-SURFACE-MNT AVB-VSTYLE-RMK-1U AVB-VSTYLE-RMK-FILL-1U AVB-VSTYLE-POLE-MNT

Mid-Size Fiber-Based Matrix Switching up to 32x32 Large-Scale Single Strand Multimode Fiber Matrix Switching up to 144x144 V-Style Module Surface Mount V-Style Module Tray V-Style Module Tray w/ fill plates V-Style Module Pole Mount

(AVS-EPDGX32) www.amx.com/products/EpicaDGX32.asp (AVS-EPDGX144) www.amx.com/products/EpicaDGX144.asp

57 60

(FG1010-722) (FG1010-720) (FG1010-721) (FG1010-723)

81 81 81 82

www.amx.com/products/AVB-VSTYLE-SURFACE-MNT.asp www.amx.com/products/AVB-VSTYLE-RMK.asp www.amx.com/products/AVB-VSTYLE-RMK.asp www.amx.com/products/AVB-VSTYLE-POLE-MNT.asp

F I B ER

DGX HD-15 Fiber TX/RX Modules Single Fiber Multimode Modules AVB-TX-DGX-HD15-SC FIBER Transmitter, HD-15 to Fiber Video, Digital, Analog Stereo (FG1010-200-01) AVB-RX-DGX-SC FIBER-HD15 Receiver, Fiber to HD-15 Video, Digital, Analog Stereo

(FG1010-400-01)

OVERVIEW Get all the security, clarity and distance benefits of signal distribution over fiber without any of the hassle. The new DGX line is specifically designed for use with a single strand of multimode fiber, and if you are new to fiber it’s the most common, easily terminated and installed cable solution. Now you too can send true, pure, uncompressed DVI, audio and control 3,000 feet and

• Standard USB (mini-B) port can be used as a virtual Com port for serial communication with a PC during system setup and upgrades • Compact module size is compatible with all V-Style versatile mounting options including rack, surface or pole • Backed by our AMX 3 year warranty

beyond in any environment. ONLINE

www.amx.com/products/DGX-DVI-Fiber.asp

Auto-detect on the Transmitters and SmartScale™ on the Receivers ensure quick or no set-up time by automatically recognizing any device’s supported resolution and signal style parameters. Now you can switch out visiting PCs and replacement LCDs without manual setup.

DGX The e x cl usi v e di gi t a l pl a t f o rm de l i v e re d by o ur DG X Te ch n o lo g y a llo w s multiple high-resolution signal styles to be converted freely internal to t he m a t ri x s w i t c he r t o num e ro us o ut put s w i t h v a r io u s s t yle s . In a d d it io n , DGX fiber products integrate the ability to receive and/or transmit signals di re c t l y v i a S C f i be r c o nne c t i o ns.

FEATURES • Designed for use with a single strand of multimode fiber; the most common, easily terminated and installed fiber cable solution

A CLOSER LOOK

• Send and receive video, audio and one-way control over a single fiber cable up to 3,000 feet • Supports RGBHV, RGBS, RGsB, and Y/Pb/Pr video resolutions up to 1920 x 1200 @ 60Hz, including 1080p with a full 4.95 Gbps optical transmission data rate providing lossless pixel for pixel reproduction • Pre-loaded with the most common EDID settings on the HD-15 input to emulate the display’s response when queried, which ensures transmission of the video from the source device • Custom EDID settings can be loaded to the HD-15 input with the use of the included EDID Programmer • DGX Technology provides a common signal transport and matrix switching layer that transcodes between analog and digital signals; allowing the DGX DVI and HD-15 TX/RX pairs to be used interchangeably • Auto detection on the HD-15 input; so manual setup is not required for visiting PC’s or any supported analog video source

E p i c a D G X H D - 1 5 F I B ER

SPECIFICATIONS GENERAL

• AC Power: 100-240 VAC single phase, 50-60 Hz; 0.6A @ 115 VAC (Max) • Power Consumption (Max): 12 V, 1.25A (15W) • BTU/HR (Max): 51 • Power Connector: 2.1 mm DC Power Jack • Operational Temperature: 32° to 113° F (0° to 45° C) • Humidity: 0 to 90% non-condensing • M TBF: 92,000 hrs • Compatible AutoPatch Fiber Products: DGX DVI TX/RX; DGX HD-15 TX/RX Epica DGX 32, Epica DGX 144 • Advanced Configuration Interface: USB Mini-B • Fiber Cable Type: -M ultimode Simplex (with SC termination) - 50/125 µm (preferred) or 62.5/125 µm • Fiber Cable Length: - U p to 3000 ft with 50um cable* - U p to 1500 ft with 62.5um cable *3000 ft cable requires 50/125 μm OM2 class low loss fiber cable, transmission distance will vary depending on the type/quality of fiber used, fiber bandwidth, cable bend radius/kinks, splicing quality & quantity, and chromatic or modal dispersion • Optical Budget: 9.75 dBm (Typ) between DGX TX and RX • Optical Modulation Amplitude (OMA): -6.25 dBm (Typ) • Optical Modulation Amplitude (OMA) Sensitivity: -16.0 dBm (Typ) • Fiber Connector: SC Optical

• HV Sync Input Trigger Voltage: + 1.75 V • Y/Pb/Pr Input Signal Level Range: - 1.0 Vpp for Y - 700 mVpp for Pb Pr • Y/Pb/Pr Input Impedance: 75 Ohms • Input Connector: HD-15 (RGBHV and Y/Pb/Pr) • RGB Local Out Signal Level Range: 0 - 700 mVpp (0 - 750 mVpp max) • RGB Local Out Impedance: 75 Ohms • HV Sync Local Out Signal Level Range: 0 to + 5 V • HV Sync Local Out Impedance: 50 Ohms • Y/Pb/Pr Local Out Signal Level Range: - 1.0 Vpp for Y - 700 mVpp for Pb Pr • Y/Pb/Pr Local Out Impedance: 75 Ohms • Local Output Connector: HD-15 (RGBHV and Y/Pb/Pr) AUDIO DGX HD-15 TRANSMITTER

• Approx. 1.75 lbs per loaded enclosure (0.8 kg) • Shipping Weight: Approx. 2.75 lb (1.25 kg)

• Input Signal Type: Stereo Analog, S/PDIF (2 Channel L-PCM) • Video signal must be present to pass Audio • Analog Input Level (max): +8 dBu, unbalanced • Analog Input Impedance: 2 kOhms • S /PDIF Resolution: 16 bit to 24 bit • S /PDIF Sample Rate:32 kHz, 44.1 kHz, 48 kHz, 96 kHz (96 kHz audio only available when source video resolution is 800x600 @ 60 Hz(40 MHz pixel clock) or greater. Otherwise 48 kHz max.) • S /PDIF Input Signal Level Range: 200 mVpp to 2.5 Vpp terminated • S /PDIF Input Impedance: 75 Ohms • Analog to Digital Reference Level: +8 dBu = 0 dBfs • Optimal Analog Audio Operating Range: -30 dBu to +8 dBu • Optimal Digital Audio Operating Range: -38 dBfs to 0 dBfs • Input Connector: - 3.5 mm Mini-Stereo Jack (Analog Stereo) - RCA Jack (S/PDIF)

APPROVALS

SERIAL DATA DGX HD-15 TRANSMITTER

DIMENSIONS (HWD)

• 1 5/8” x 5 13/16” x 5 1/8” (4.22 cm x 14.73 cm x 13.08 cm) • RU: 1 WEIGHT

• Safety Certifications (DVI TX): Class 1 Laser Product (Class 3R Laser Product when fiber is disconnected from the unit) IEC 60825-1, 2001 • CE, UL, cUL, RoHS VIDEO DGX HD-15 TRANSMITTER / RECEIVER

• Resolution Support: 640x480 @ 60 Hz up to 1920x1200 @ 60 Hz • Data Rate (Max): 4.95 Gbps • Pixel Clock: 25 MHz to 165 MHz • Digital Processing: Video - 24 bit, 165 MHz VIDEO DGX HD-15 TRANSMITTER

• Input Signal Type: RGBHV, Y/Pb/Pr • Auto-Adjust Input: Yes • DDC/EDID Support: - E DID provided by DGX transmitter - EDID is user reprogrammable • RGB Input Signal Level Range: 0 - 700 mVpp (0 - 750 mVpp Max) • RGB Input Impedance: 75 Ohms • HV Sync Input Signal Level Range: 0 to + 5 V • HV Sync Input Impedance: 510 Ohms

• Input Signal Type: Unidirectional RS-232, the control signal is transmitted in the same direction as Video/Audio. • Video signal must be present to pass Serial Data • Input Signal Level (Max): ± 15V • Baud Rate (Max): 115.2k Baud, 25ft cable • Baud Rate (Typ): 57.6k Baud, 150ft Cable • Input Connector: Pluggable 3.5mm Terminal Block EDID DGX HD-15 TRANSMITTER

• E stablished Timing: • Standard Timing Identification: - 720 x 400 @ 70 Hz, 88 Hz - ID 1: 1920 x 1200 @ 60 Hz* - 640 x 480 @ 60 Hz, 67 Hz, 72 Hz, 75 Hz - ID 2: 1920 x 1080 @ 60 Hz* - ID 3: 1680 x 1050 @ 60 Hz - 8 00 x 600 @ 56 Hz, 60 Hz, 72 Hz, 75 Hz - ID 4: 1600 x 1200 @ 60 Hz - 832 x 624 @ 75 Hz - ID 5: 1280 x 800 @ 60 Hz - 1024 x 768 @ 60 Hz, 70 Hz, 75 Hz, - ID 6: 1280 x 720 @ 60 Hz 87 Hz - ID 7: 1280 x 1024 @ 60 Hz - 1280 x 1024 @ 75 Hz - ID 8: 640 x 480 @ 120 Hz - 1152 x 870 @ 75 Hz * I ncluded in the detailed timing block with reduced sync blanking

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

Epica DGX 32 DVI Epica DGX 144 AVB-VSTYLE-SURFACE-MNT AVB-VSTYLE-RMK-1U AVB-VSTYLE-RMK-FILL-1U AVB-VSTYLE-POLE-MNT

(AVS-EPDGX32) www.amx.com/products/EpicaDGX32.asp (AVS-EPDGX144) www.amx.com/products/EpicaDGX144.asp

57 60

(FG1010-722) (FG1010-720) (FG1010-721) (FG1010-723)

81 81 81 82

www.amx.com/products/AVB-VSTYLE-SURFACE-MNT.asp www.amx.com/products/AVB-VSTYLE-RMK.asp www.amx.com/products/AVB-VSTYLE-RMK.asp www.amx.com/products/AVB-VSTYLE-POLE-MNT.asp

distribution amplifiers

AVB-DA-SVID-0104 S-Video Distribution Amplifier Module (FG1010-70-01)

OVERVIEW

SPECIFICATIONS

Used as a stand alone module, the S-Video Distribution Amplifier

DIMENSIONS (HWD)

Module distributes one S-Video signal out to four outputs.

1 11/16” x 4 5/16” x 5 1/8” (4.22 cm x 11.00 cm x 13.08 cm) weight

1.3 lbs (0.6 kg)

FEATURES

power requirement

• New space saving V-Style (versatile) module design • Power Supply Energy Star rated to ensure maximum efficiency ®

and savings • Automatically adjusting universal 110 / 220 IEC power supply is included with every unit • Compatible with V-Style mounting options including rack, surface or pole

• Power Consumption: +12 VDC to +24 VDC @ 1.3 A • Power Connector: 2.1 mm DC power jack (S-Video DA modules use power supplies that are provided with the unit.) • BTU/HR (Max): 15 • Power AF-10: 100 to 240 VAC single phase, 50 to 60 Hz connector options

S-Video, Locking S-Video S-VIDEO SPECIFICATIONS

ONLINE www.amx.com/products/AVB-DA-SVID-0104_VSTYLE. asp

• Frequency Response: - ±3 dB, 50 MHz or better - ±1 dB, 15 MHz or better • Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE) • Input Level (Max): ±1.75 Volts • Input Impedance: 75 Ohms • Output Level (Max): ±1.75 Volts • Output Impedance: 75 Ohms • DC Offset Out (max.): ±20 mV Measured with 0 V on input certifications

CE, UL, cUL ENVIRONMENTAL

• Operational Temperature: 32° - 110° F (0° - 43° C) • Humidity: 0 to 90% non-condensing

A CLOSER LOOK

9 V Po wer

S-Vide o Outputs (1-4) S-Vide o Input (1)

D i G ITAL S I G NA G E

Inspired Signage Inspired Signage Custom Solutions

OVERVIEW

SCALEABLE

Inspired Signage delivers eye-catching, digital signage across a

Whether the requirement is for a single display or a network of

building, a campus or around the world, and provides the ability

thousands of players, Inspired Signage has the tools to ensure

to edit and schedule that content from a centralized location.

a successful deployment which is easy to manage and support. With additional Control and Content Distribution products from

In addition to spectacular images, two other things make an

AMX, capabilities can be added such as central management of

Inspired Signage solution superior. First is the ease with which

displays to minimize power consumption and extend useful life.

staff can make changes to messages with very little training. Second is the sophistication Inspired Signage provides - which

For Inspired Signage Custom Solutions, please contact

enables viewer interaction with the signage, central control of

Technical Sales at 1.800.222.0193 option 4 or via e-mail at

the displays in addition to the content, and the ability to change

techsales@amx.com.

content based on local factors such as outside temperature. ONLINE www.amx.com/products/IS-CUSTOM.asp Our experienced team of graphics designers works directly with customers and creative advisers to develop a set of templates that provides the framework for that best expresses a brand message. SPECTACULAR

S P OT LI GHT W ha t ’s y o ur si gna ge ? We i nv i t e y o u t o l e a rn m o re a b o u t h o w I nspi re d S i gna ge c a n he l p y o u c re a t e t rul y d y na m ic d is p la ys a t www. am x . c om /i ns pi reds i gnage.

Inspired Signage delivers the highest visual quality available on the market. Inspired Signage solutions render all content at 1920x1080 to match display devices, and at 60 frames per second content will be vibrant while delivering very smooth transitions of text and animation. The key to Inspired Signage is the use of templates to separate the visual design and animation from the editorial content. DYNAMIC Inspired Signage has been designed to handle multiple channels, running at multiple sites, with schedules being capable of change every few minutes. This capability exceeds the demands of most

AWARD W I NNER 2 0 0 8 B es t Vi deo/B r oadc as t or Vi deo/S tream i ng P r o d u c t I nf o C o m m I nt e rna t i o na l a nd R e nt a l a nd S t a gi ng S ys t e m s Ma g a z in e spo nso re d t he B e st Pro duc t s o f 2 0 0 8 A w a rds, w hi ch r e w a r d e xce lle n ce for the best new products for the rental and staging market introduced i n 2 0 0 7 ba se d o n a spe c i a l R e nt a l & S t a gi ng S y st e m s m a g a z in e readers’ poll. The Inspired Signage Inspired Player Server and Software w a s a w a rde d B es t Vi deo/B r oadc as t or Vi deo/S tre a mi n g P r o d u c t . 2 0 0 7 I nfoC om m Hot P r oduc ts Pro AV m a g a z i n e e v a l u a t e s a l l o f t h e e x h i b i t o r s ’ n e w p r o d u c t s a nno unc e d a t t he sho w a nd a w a rds “ I nfoC om m H o t P r o d u c t s” a wa r d s . Thi s y e a r, A M X w a s t he f i rst c o m pa n y e v e r t o re c e ive t w o “ H o t P r o d u c t s Awards ” f ro m Pro AV – f o r t h e A n t e r u s R F I D p r o d u c t a n d f o r t h e I nspi re d S i gna ge so l ut i o n.

client specifications and results in communications that are as precisely targeted as a user’s demographic data allows. In a retail environment this means the content schedule could be the same in all stores, different in each region, specific to each store or specific to each sales location within the store or group of stores. Our Composer user interface enables the system administrator to create an unlimited portfolio of schedules with start and end times that match exact requirements.

C U S TOM S OLUTION S D i G ITAL S I G NA G E

SPECIFICATIONS DIMENSIONS (HWD)

CERTIFICATIONS

• 2 4/5” x 16 1/4” x 12” (7.11 cm x 41.27 cm x 30.48 cm) • 2 RUs

• FCC Class B • cTÜVus • CE Mark • CB Report • RoHS compliant

WEIGHT

13.75 lbs (6.24 kg) POWER

INCLUDED ACCESSORIES

• 100-240VAC, 5-3A, 50/60Hz • Internal: 270W FLEX ATX Power Supply

• One set Rack Mount Ears • One power cable • DVI to VGA adapter • Component adapter for Graphics Card

AC CURRENT DRAW

• Input Current: Max 5A @115Vac, 3A @230Vac • Max output - 270 (50ºC) (+3.3V & .5V=130W) • DC output - +3.3V ENCLOSURE

Metal with black matte finish OPERATING ENVIRONMENT

WEPOS Operating System FRONT PANEL COMPONENTS

• Status - Green LED indicates power - Yellow LED indicates disc activity REAR PANEL COMPONENTS

• Power Switch: Turns power on/off. Note: This is a “soft switch”: flipping the switch while the Player is running issues a shutdown request. • Power connector: IEC connector for AC power cable (included) Note: Connect only to AC power supplied according to appropriate national requirements. Contact your AC power Provider for National Requirements. Note: Isolate IT Power System Connection. • USB Ports: 6 Type-B USB Ports for connecting USB mouse and keyboard. Note: The Player is designed to be used without a keyboard and mouse; they are not required for normal operation. • Ethernet Port: RJ-45 Ethernet port provides Gigabit Ethernet communication between the Player and the Controller PC (which runs the Inspired Composer application). Connect the Ethernet port to the LAN • Audio Out: Provides stereo audio output to the display, via a mini-stereo-toRCA cable (not included). Note: The Audio in (blue) and Microphone (red) connectors are not used. • DVI Video Out (1 & 2): Provides DVI dual link (HD resolution) video output to displays, via DVI cable (recommended output). Note: There are 2 DVI video outputs provided, but typically only one is used. Either DVI output port can be used to deliver video to the display.

RECOMMENDED ACCESSORIES

DESCRIPTION PART # ONLINE PAGE #

MAX-CSD10

Decoder

(FG2178-72)

www.amx.com/products/MAX-CSD10.asp

D i G ITAL S I G NA G E

IS-COMP4-DESK Composer 4.0 Desktop Edition (FG1200-05)

OVERVIEW

FEATURES

Inspired Composer software provides on-the-spot editing,

• User friendly content management interface

publishing and delivery of content (locally or globally) including

• Create, schedule and deliver content to your network of players

real-time internet content like weather, stock tickers, and news - to

• Manage multiple destinations with full user rights and restrictions

every display. ONLINE www.amx.com/products/IS-COMP4-DESK.asp One Inspired Composer License is included on a CDRom with each Player. A license is required for each PC user that wants to

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ I S -C OM P 4 -DES K . as p a nd cl i c k o n t he “Tra i ni ng” t a b .

interface with the Inspired Player.

IS-COMP4-SERV Composer 4.0 Server Edition (FG1200-06)

OVERVIEW

FEATURES

Inspired Composer software provides on-the-spot editing,

• User friendly content management interface

publishing and delivery of content (locally or globally) including

• Create, schedule and deliver content to your network of players

real-time internet content like weather, stock tickers, and news - to

• Manage multiple destinations with full user rights and restrictions

every display. ONLINE www.amx.com/products/IS-COMP4-SERV.asp One Inspired Composer License is included on a CDRom with each Player. A license is required for each PC user that wants to interface with the Inspired Player on the server.

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ I S -C OM P 4 -S ER V. as p a nd cl i c k o n t he “Tra i ni ng” t a b .

IPT V

V2-2100-WMV Entry-Level Solution (WMV)

ONLINE www.amx.com/products/V2-2100-WMV.asp

SPECIFICATIONS This solution provides two live WMV channels over a standard IP network for up to 50 users. The V² Producer channel allows scheduling for timed playback of pre-recorded video content via multicast or uni-cast, on private networks or the web.

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -2 1 0 0 -WM V. as p a nd cl i c k o n t he “Tra i ni ng” t a b .

INCLUDES • 2 Live WMV Channels (50 Users)

S P OT LI GHT M a n a g i n g y o u r v i d e o h a s n e v e r b e e n t h i s s i m p l e . We i n v i t e y o u t o l e a r n m o re a bo ut t he V i si o n² I PTV so l ut i o n a t w w w. am x .c o m / Vis io n 2 .

• 1 Producer Channel • 1 Vision² Master Server • 1 WMV Appliance • 250 Archive Hours

For Vision2 solution pricing, please contact Technical Sales at 1.800.222.0193 option 4 or via e-mail at techsales@amx.com.

V2-4210-WMV Mid-Level Solution (WMV)

ONLINE www.amx.com/products/V2-4210-WMV.asp

SPECIFICATIONS This solution provides four live WMV channels as well as Video on Demand (VoD) support over a standard IP network for up to 100 users. The two V² Producer channels allow scheduling for timed playback of pre-recorded video content via multicast or uni-cast,

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -4 2 1 0 -WM V. as p a nd cl i c k o n t he “Tra i ni ng” t a b .

on private networks or the web. INCLUDES • 4 Live WMV Channels (100 Users) • 2 Producer Channels

• 1 Vision² Master Server • 1 VoD Server • 2 WMV Appliances • 500 Archive Hours

For Vision2 solution pricing, please contact Technical Sales at 1.800.222.0193 option 4 or via e-mail at techsales@amx.com.

• 10 Concurrent VoD Channels

IPT V

V2-10420-WMV High-End Solution (WMV)

SPECIFICATIONS

ONLINE www.amx.com/products/V2-10420-WMV.asp

This solution provides 10 live WMV channels as well as Video on Demand (VoD) support over a standard IP network for up to 500 users. The four V² Producer channels allow scheduling for timed playback of pre-recorded video content via multicast or uni-cast,

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -1 0 4 2 0 -WM V. as p a nd cl i c k o n t he “Tra i ni ng” t ab .

on private networks or the web. INCLUDES • 10 Live WMV Channels (500 Users) • 4 Producer Channels

• 1 Vision² Master Server • 1 VoD Server • 5 WMV Appliances • 500 Archive Hours

For Vision2 solution pricing, please contact Technical Sales at 1.800.222.0193 option 4 or via e-mail at techsales@amx.com.

• 20 Concurrent VoD Channels

V2-2100-MPEG Entry-Level Solution (MPEG)

SPECIFICATIONS

ONLINE www.amx.com/products/V2-2100-MPEG.asp

This solution provides two live MPEG channels over a standard IP network for up to 50 users. The V² Producer channel allows scheduling for timed playback of pre-recorded video content via multicast or uni-cast, on private networks or the web.

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -2 1 0 0 -M P EG. as p a nd cl i c k o n t he “Tra i ni ng” t ab .

INCLUDES • 2 Live MPEG2 Channels (50 Users) • 1 Producer Channel • 1 Vision² Master Server

• 2 MAX-CSE Encoders • 250 Archive Hours

For Vision2 solution pricing, please contact Technical Sales at 1.800.222.0193 option 4 or via e-mail at techsales@amx.com.

IPT V

V2-4210-MPEG Mid-Level Solution (MPEG)

ONLINE www.amx.com/products/V2-4210-MPEG.asp

SPECIFICATIONS This solution provides four live MPEG channels over a standard IP network for up to 100 users, as well as Video on Demand (VoD) support for 10 concurrent users. The two V² Producer channels allow scheduling for timed playback of pre-recorded video

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -4 2 1 0 -M P EG. as p a nd cl i c k o n t he “Tra i ni ng” t ab .

content via multicast or uni-cast, on private networks or the web. INCLUDES

• 4 Live MPEG2 Channels (100 Users) • 2 Producer Channels • 1 Vision² Master Server • 1 VoD Server

For Vision2 solution pricing, please contact Technical Sales

• 4 MAX-CSE Encoders

at 1.800.222.0193 option 4 or via e-mail at techsales@amx.com.

• 500 Archive Hours • 10 Concurrent VoD Channels

V2-10420-MPEG High-End Solution (MPEG)

ONLINE www.amx.com/products/V2-10420-MPEG.asp

SPECIFICATIONS This solution provides 10 live MPEG channels over a standard IP network for up to 500 users, as well as Video on Demand (VoD) support for 20 concurrent users. The four V² Producer channels allow scheduling for timed playback of pre-recorded video

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -1 0 4 2 0 -M P EG. as p a nd cl i c k o n t he “Tra i ni ng” t a b .

content via multicast or uni-cast, on private networks or the web. INCLUDES • 10 Live MPEG2 Channels (500 Users) • 4 Producer Channels

• 1 Vision² Master Server • 1 VoD Server • 10 MAX-CSE Encoders • 500 Archive Hours

For Vision2 solution pricing, please contact Technical Sales at 1.800.222.0193 option 4 or via e-mail at techsales@amx.com.

• 20 Concurrent VoD Channels

IPT V

V2-4100-DVB Mid-Level Solution (DVB)

SPECIFICATIONS

ONLINE www.amx.com/products/V2-4100-DVB.asp

This solution provides four live Digital Video Broadcast (DVB) multiplexed channels over a standard IP network for up to 50 users. The V² Producer channel allows scheduling for timed playback of pre-recorded video content via multicast or uni-cast,

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -4 1 0 0 -DVB. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

on private networks or the web. INCLUDES • 4 Live DVB-T Multiplexed Channels (50 Users) • 1 Producer Channel

• 1 Vision² Master Server • 1 DVB Appliance • 250 Archive Hours

For Vision2 solution pricing, please contact Technical Sales at 1.800.222.0193 option 4 or via e-mail at techsales@amx.com.

V2-8420-DVB High-End Solution (DVB)

SPECIFICATIONS

ONLINE www.amx.com/products/V2-8420-DVB.asp

This solution provides eight live Digital Video Broadcast (DVB) multiplexed channels over a standard IP network for up to 500 users, as well as Video on Demand (VoD) support for 20 concurrent users. The four V² Producer channels allow scheduling

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -8 4 2 0 -DVB. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

for timed playback of pre-recorded video content via multicast or uni-cast, on private networks or the web. INCLUDES • 8 Live DVB-T Multiplexed Channels (500 Users)

• 4 Producer Channels • 1 Vision² Master Server • 1 VoD Server • 2 DVB Appliances

For Vision2 solution pricing, please contact Technical Sales at 1.800.222.0193 option 4 or via e-mail at techsales@amx.com.

• 500 Archive Hours • 20 Concurrent VoD Channels

IPT V

V2-2000-WMV Additional V2 Live Modules (WMV) (FG3100-13K)

OVERVIEW Expand any Vision² solution to include an additional two WMV channels.

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -2 0 0 0 -WM V. as p a nd cl i c k o n t he “Tra i ni ng” t a b .

INCLUDES • 1 WMV Appliance S P OT LI GHT M a n a g i n g y o u r v i d e o h a s n e v e r b e e n t h i s s i m p l e . We i n v i t e y o u t o l e a r n m o re a bo ut t he V i si o n² I PTV so l ut i o n a t w w w. am x .c o m / Vis io n 2 .

• 1 2-Channel WMV Expansion Master License ONLINE www.amx.com/products/V2-2000-WMV.asp

V2-1000-MPEG Additional V2 Live Module (MPEG) (FG3100-23K)

OVERVIEW Expand any Vision² solution to include an additional MPEG channel.

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -1 0 0 0 -M P EG. as p a nd cl i c k o n t he “Tra i ni ng” t ab .

INCLUDES • 1 MAX-CSE Encoder • 1 Channel MPEG2 Expansion Master License ONLINE www.amx.com/products/V2-1000-MPEG.asp

IPT V

V2-4000-DVB Additional V2 Live Module (DVB) (FG3100-32K)

OVERVIEW Expand any Vision² solution to include an additional four Digital Video Broadcast (DVB) channels.

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -4 0 0 0 -DVB. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

INCLUDES • 1 DVB Appliance • 1 4-Channel DVB Expansion Master License ONLINE www.amx.com/products/V2-4000-DVB.asp

V2-ARCHIVE Additional Storage Module V2-ARCHIVE-SS

(FG3100-03K)

V2-ARCHIVE-LS

(FG3100-04K)

OVERVIEW Add storage to any Vision² solution. V² Archive allows you to store

• Vision² Dedicated Archive Server

and manage videos in Flash, WMV, MPEG 2 and MPEG 4 format

• 50 Concurrent VoD Channels

for future use. The stored content can then be used to build

• 1165 Archive Hours

your own channel and/or allow users to access it with Video on Demand (VoD). V² Archive has an integrated search feature that

ONLINE www.amx.com/products/V2-ARCHIVE.asp

allows you to find content based on titles and metadata. UPGRADE KIT FOR ENTRY LEVEL SOLUTION INCLUDES: • Vision² Standard Server

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -A R C HI VE. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

• Vision² Dedicated Archive Server • 50 Concurrent VoD Channels • 1165 Archive Hours UPGRADE KIT FOR MID-LEVEL/HIGH-END SOLUTION

INCLUDES:

IPT V

V2-MASTER-0010 Additional V2 Server with VoD (FG3100-02K)

OVERVIEW Expand any Vision² solution to include an additional master server as well as Video on Demand (VoD) support.

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -M A S TER -0 0 1 0 . as p a nd cl i c k o n t he “Tra i ni ng” t a b .

INCLUDES • 1 Vision² Server S P OT LI GHT M a n a g i n g y o u r v i d e o h a s n e v e r b e e n t h i s s i m p l e . We i n v i t e y o u t o l e a r n m o re a bo ut t he V i si o n² I PTV so l ut i o n a t w w w. am x .c o m / Vis io n 2 .

• 10 Concurrent VoD Channels • 1 Expansion Master License ONLINE www.amx.com/products/V2-MASTER-0010.asp

IPT V

V2-RECORD Additional V2 Record Module (FG3100-40L)

OVERVIEW V² Record enables you to record live video streams and automatically store the content in the V² Archive. V² Record is compatible with all of the V² Live video formats (WMV and

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -R EC OR D. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

MPEG2). INCLUDES • 1 V² Record 1-Channel License

ONLINE www.amx.com/products/V2-RECORD.asp

V2-PROD Additional Scheduled Channel (FG3100-42L)

OVERVIEW Expand any Vision² solution by adding a WMV or MPEG channel. Each channel is managed via V2 Producer, which allows you to deliver pre-recorded video content via a schedule. INCLUDES • 1 V² Producer 1-Channel License (WMV or MPEG)

T RAI NI NG AVAI LABLE Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s , A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/ V2 -P R OD. as p a nd cl i c k o n t he “Tra i ni ng” t a b.

ONLINE www.amx.com/products/V2-PROD.asp

S O F TWARE

RESOURCE MANAGEMENT SUITE RMS Interface Modules OVERVIEW This new scheduling system interface module allow RMS to easily share information with Exchange/Outlook, highlighting our commitment to industry partnerships and open systems. RMS Interface for Microsoft

RMS Exchange Interface Scheduling License

(FG3002-31)

www.amx.com/products/NSS-RMS-EXCH.asp

OVERVIEW This new scheduling system interface module allow RMS to easily share information with Lotus Domino, highlighting our commitment to industry partnerships and open systems. RMS Interface for Lotus

RMS Lotus Domino Interface Scheduling License

(FG3002-32)

www.amx.com/products/NSS-RMS-LN.asp

OVERVIEW This new scheduling system interface module allow RMS to easily share information with GroupWise, highlighting our commitment to industry partnerships and open systems. RMS Interface for Novell

RMS Groupwise Interface Scheduling License

(FG3002-33)

www.amx.com/products/NSS-RMS-GW.asp

OVERVIEW This new scheduling system interface module allow RMS to easily share information with Integrated Workspace Management, highlighting our commitment to industry partnerships and open systems. RMS Interface for Planon

RMS Planon Interface Scheduling License

(FG3002-34)

www.amx.com/products/NSS-RMS-PLAN.asp

OVERVIEW This new scheduling system interface module allow RMS to easily share information with EMS, highlighting our commitment to industry partnerships and open systems. RMS Interface for Dean Evans & Associates RMS EMS Interface Scheduling License

(FG3002-35)

www.amx.com/products/NSS-RMS-EMS.asp

OVERVIEW This new scheduling system interface module allow RMS to easily share information with R25, highlighting our commitment to industry partnerships and open systems. RMS Interface for CollegeNet

RMS R25 Interface Scheduling License

(FG3002-36)

www.amx.com/products/NSS-RMS-R25.asp

OVERVIEW This new scheduling system interface module allow RMS to easily share information with Resource Scheduler software, highlighting our commitment to industry partnerships and open systems. RMS Interface for PeopleCube

100

RMS PeopleCube Interface Scheduling License

(FG3002-37)

www.amx.com/products/NSS-RMS-PPC.asp

S O F TWARE

Room Kits KIT INCLUDES • 25 NXD-700Vi: 7” Modero Wall/Flush Mount Touch Panels with Intercom • 1 NSS-RMSSV: RMS Server License • 25 NSS-RMSSCL: RMS Schedule Client Licenses

RMS-ROOM-25S

RMS Room Kit (NXD-700Vi + RMS Scheduling)

(FG3002-101K)

www.amx.com/products/RMS-ROOM-25S.asp

KIT INCLUDES • 25 NXD-700Vi: 7” Modero Wall/Flush Mount Touch Panels with Intercom • 1 NSS-RMSSV: RMS Server License • 25 NSS-RMSSCL: RMS Schedule Client Licenses • 25 NSS-RMSACL: RMS Asset Client Licenses RMS-ROOM-25SA

RMS Room Kit (NXD-700Vi + RMS Scheduling, Asset Management)

(FG3002-102K)

www.amx.com/products/RMS-ROOM-25SA.asp

KIT INCLUDES • 50 NXD-700Vi: 7” Modero Wall/Flush Mount Touch Panels with Intercom • 1 NSS-RMSSV: RMS Server License • 50 NSS-RMSSCL: RMS Schedule Client Licenses

RMS-ROOM-50S

RMS Room Kit (NXD-700Vi + RMS Scheduling)

(FG3002-103K)

www.amx.com/products/RMS-ROOM-50S.asp

KIT INCLUDES • 50 NXD-700Vi: 7” Modero Wall/Flush Mount Touch Panels with Intercom • 1 NSS-RMSSV: RMS Server License • 50 NSS-RMSSCL: RMS Schedule Client Licenses • 50 NSS-RMSACL: RMS Asset Client Licenses RMS-ROOM-50SA

RMS Room Kit (NXD-700Vi + RMS Scheduling, Asset Management)

(FG3002-104K)

www.amx.com/products/RMS-ROOM-50SA.asp

KIT INCLUDES • 100 NXD-700Vi: 7” Modero Wall/Flush Mount Touch Panels with Intercom • 1 NSS-RMSSV: RMS Server License • 100 NSS-RMSSCL: RMS Schedule Client Licenses

RMS-ROOM-100S

RMS Room Kit (NXD-700Vi + RMS Scheduling)

(FG3002-105K)

www.amx.com/products/RMS-ROOM-100S.asp

KIT INCLUDES • 100 NXD-700Vi: 7” Modero Wall/Flush Mount Touch Panels with Intercom • 1 NSS-RMSSV: RMS Server License • 100 NSS-RMSSCL: RMS Schedule Client Licenses • 100 NSS-RMSACL: RMS Asset Client Licenses RMS-ROOM-100SA

RMS Room Kit (NXD-700Vi + RMS Scheduling, Asset Management)

(FG3002-106K)

www.amx.com/products/RMS-ROOM-100SA.asp

101

© January 2010 AMX. All rights reserved. AMX and the AMX logo, Endeleo, Matrix, and AutoPatch are all registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time.

3 0 0 0 RESEARCH DRI V E , RI CHARDSON, TX 75082 • 800. 2 2 2 . 0 1 9 3 • 4 6 9 . 6 2 4 . 8 0 0 0 • +1 . 4 6 9 . 6 2 4 . 7 4 0 0 • 4 6 9 . 6 2 4 . 7 1 5 3 f a x • w w w. a m x . c o m

01.10.DOM