SPECIFICATION GUIDE PRODUCT: Select from over 250 standard Lumicor products from our product families: Textures including Embossed, Industrial, Textiles, and Natural, and Colors including True, Woven, and Shimmer. Or create your own custom Lumicor by combining décors. For example, combine a Color with a Texture to add color and depth. Lumicor can also incorporate Customer Owned Materials (C.O.M.). Call for more details. SIZE: Sheet Thickness Lumicor is available in gauges from 0.060” (about 1/16” or 1.5mm) to 0.944” (about 1” or 24mm) with a standard tolerance of +/- 10% of nominal. Tolerance varies by décor.
Gauge Equivalents Nominal Fraction Metric Decimal Equivalent (mm) (in) .060 1/16" 1.5 .118 1/8" 3.0 .160 5/32" 4.1 .196 3/16" 5.0 .236 1/4" 6.0 .354 3/8" 9.0 .472 1/2" 12.0 .708 3/4" 18.0 .944 1" 24.0
SHEET DIMENSIONS: Many Lumicor products are available in the following sheet sizes: 4' x 8' Standard (48” x 96”) [1219 x 2438 mm] 4' x 10' Oversize (48” x 120”) [1219 x 3048 mm] 5' x 10' Oversize (59” x 120”) [1499 x 3048 mm] Actual dimensions may vary by décor, and some décors are not available in oversize sheets. FINISHES: Lumicor products are available in a variety of surface finishes to provide different aesthetics. Not all finishes are available with all products. You can specify different finishes on each side of the sheet. Both matte and gloss finishes can be resurfaced if damaged during service (see fabrication guide on www.lumicor.com for more details). Lumicor’s heavier finishes such as frost and satin provide better protection against minor surface scratches, but they can only be resurfaced to a gloss or matte finish. The following is a list of standard finishes: H - Matte K - Frost T - Diffusion
A - Gloss L - Satin E - Adobe
D - Sandstone U - Moire
RESIN: Lumicor is manufactured using several high performance engineering resins, including acrylic, cross-linked acrylic, and PETG. The resin used will depend on the performance requirements of your project. For more information, visit www.lumicor.com or call 1.888.LUMICOR p.1 of 3 Updated 4/27/09 | Specification Guide| ©2009 Lumicor, Inc. All rights reserved.
SPECIFICATION GUIDE Lumiclear (Acrylic) – Outstanding clarity, resistance to UV degradation, greater rigidity, and renewable surface. Lumiguard (Cross-linked Acrylic) – All the benefits of acrylic plus enhanced chemical and stain resistance. Lumiform (PETG) – Superior impact resistance, better flammability rating, and greater flexibility. PROTECTIVE FINISH OPTIONS: ChemShield is a high performance clear film that can be applied to one or both sides of Lumiclear products. With Chemshield applied, Lumicor products can be used in environments requiring superior stain and chemical resistance. ChemShield is available in all Lumicor textures, but cannot be renewed if damaged. EXPANSION/CONTRACTION: Lumicor products will expand and contract nominally with changes in temperature. Please allow for expansion / contraction when installing fasteners, hardware, frame systems, or when edge butting sheets. The formula below can be used to calculate the appropriate allowance for expansion and contraction:
X
Coefficient of Thermal Expansion
=
Expansion Allowance
ºF
X
.00003
=
Inches
X
ºC
X
.000054
=
mm
Length, Width or Thickness
X
Temperature Change
X
Coefficient of Thermal Expansion
=
Expansion Allowance
Imperial
Inches
X
ºF
X
.00004
=
Inches
Metric
mm
X
ºC
X
.00007
=
mm
Length, Width or Thickness
X
Temperature Change
X
Coefficient of Thermal Expansion
=
Expansion Allowance
Imperial
Inches
X
ºF
X
.00005
=
Inches
Metric
mm
X
ºC
X
.00009
=
mm
Length, Width or Thickness
Imperial Metric
Lumiclear
Lumiguard
Lumiform
X
Temperature Change
Inches
X
mm
Example: A 48”x96” Lumiclear panel will be installed an office building near the entrance. The coldest temperature of the panel in that location over the entire year is expected to be 50ºF, and the warmest is expected to be 90ºF. The temperature change will then be 40ºF. The height would then change 0.115” from the coldest to the warmest temperature exposure, and the width would change 0.058”.
For more information, visit www.lumicor.com or call 1.888.LUMICOR Updated 4/27/09 | Specification Guide| ©2009 Lumicor, Inc. All rights reserved.
p.2 of 3
SPECIFICATION GUIDE WEIGHT: All weights are estimated; actual weights will vary depending on décor. Recycled glass, shells, and sheet metal products will weigh more than indicated in the charts below. Lumiclear and Lumiguard Thickness Weight per square foot Weight per square meter 48”x96” sheet 1219x2438 mm sheet 48”x120” sheet 1219x3048 mm sheet 59”x120” sheet 1499x3048 mm sheet
mm
1/8" 0.118 3.0
5/32" 0.16 4.1
3/16" 0.196 5.0
1/4" 0.236 6.0
3/8" 0.354 9.0
1/2" 0.472 12.0
3/4" 0.708 18.0
1" 0.944 24.0
Lbs/ft²
0.73
0.99
1.21
1.46
2.19
2.92
4.38
5.84
kg/m² Lbs kg Lbs kg Lbs kg
3.57 23.4 10.6 29.2 13.3 36.5 16.3
4.84 31.7 14.4 39.6 18.0 49.5 22.1
5.92 38.8 17.6 48.5 22.0 60.7 27.1
7.13 46.8 21.2 58.4 26.5 73.0 32.6
10.70 70.1 31.8 87.7 39.8 109.6 48.9
14.27 93.5 42.4 116.9 53.0 146.1 65.2
21.40 140.3 63.6 175.3 79.5 219.1 97.8
28.53 187.0 84.8 233.8 106.0 292.2 130.4
mm
1/8" 0.118 3.0
5/32" 0.16 4.1
3/16" 0.196 5.0
1/4" 0.236 6.0
3/8" 0.354 9.0
1/2" 0.472 12.0
3/4" 0.708 18.0
1" 0.944 24.0
Lbs/ft²
0.78
1.06
1.29
1.56
2.34
3.12
4.68
6.24
kg/m² Lbs kg Lbs kg Lbs kg
3.81 24.9 11.3 31.2 14.1 39.0 17.4
5.16 33.8 15.3 42.3 19.2 52.9 23.6
6.32 41.4 18.8 51.8 23.5 64.7 28.9
7.61 49.9 22.6 62.4 28.3 78.0 34.8
11.42 74.8 33.9 93.6 42.4 116.9 52.2
15.23 99.8 45.2 124.7 56.6 155.9 69.6
22.84 149.7 67.9 187.1 84.9 233.9 104.3
30.45 199.6 90.5 249.5 113.1 311.8 139.1
in
Lumiform Thickness Weight per square foot Weight per square meter 48”x96” sheet 1219x2438 mm sheet 48”x120” sheet 1219x3048 mm sheet 59”x120” sheet 1499x3048 mm sheet
in
DISCLAIMER: This data is based on information believed to be reliable. The information is offered in good faith, but without guarantee, as conditions and method of use are beyond the control of Lumicor, Inc. Lumicor, Inc. recommends that prospective users determine the suitability of Lumicor materials before purchasing. In no case is Lumicor, Inc. liable for direct, consequential, economic, or other damages. Lumicor, Inc. disclaims all other warranties, expressed or implied, including the warranty of merchantability and fitness for a particular purpose.
For more information, visit www.lumicor.com or call 1.888.LUMICOR Updated 4/27/09 | Specification Guide| ©2009 Lumicor, Inc. All rights reserved.
p.3 of 3