Tips for maintaining 925 sterling silver Overview There are a number of people in the world who wonder how to preserve their precious silver jewellery from tarnishing or getting deteriorated in the course of time. This article is specifically for such people. If you have a piece of sterling silver jewellery that is close to your heart and you want to maintain it in a good condition, this article is for you. Most people have some confusion when it comes to maintaining their silver jewellery. It is essential to know ahead of time what changes the silver jewellery will go through and how you can prevent it from deteriorating in time. It doesn’t matter what kind of silver it is, as long as it is silver, it will interact and react with the sulfides naturally present in the air. The tarnish growing on the silver jewellery will first take a golden hue and then turn black. A higher level of sulfide in the atmosphere is generally associated with a higher level of humidity or/and air pollution. It must be remembered that the higher the level of humidity, the more likely is the silver to get tarnished.
●
●
●
925 Sterling silver earrings or rings can be easily cleaned or polished by rubbing them gently or buffing them with a soft cotton cloth. A cloth that has been chemically treated such as a sunshine cloth does a better and more effective job at cleaning the jewellery quicker and faster. Dips or baths in chemicals is a very popular and easy method of cleaning sterling silver jewellery. However, it must be remembered that if the piece of jewellery is left in the bath for too long, the chemical may take off the color of the jewellery and harm the polish of the gemstones in the jewellery. Also if the jewellery is not properly rinsed after being immersed in the bath, there will be white residues left on the piece after it dries up. It will then be a big challenge to rub off or remove this residue. Therefore, if you decide on using the silver dip, make sure that you dip the piece of jewellery and take it out quickly; and then rinse it well with water. Once the piece of jewellery has dried off, buff it nicely with a dry and soft cotton cloth or, if you have it, a sunshine cloth. Doing so leaves a bit of protective tarnish resistant coating on the jewellery and help the jewellery retain the shine a little longer. Tarnish Shield, or similar lacquer shield, will keep the piece of jewelry shiny until the tarnish wears off. You should be aware that pieces that have been lacquered don’t age well, until all the lacquer has worn off. In spots where the lacquer has loosened from the sterling, but not worn off, the silver will tarnish, but you won’t be able to buff it. If you use a dip to clean a piece that has a tarnish shield, often the dip will get under parts of the lacquer, leaving a residue, wherever the lacquer is beginning to wear off. If the piece is a chain, or a filigree, the lacquer will form a film within the openings and cracks. This obviously makes the piece ugly. The simplest way is usually the best way. Get a clean, soft cloth and polish your silver. It will be beautiful again!
Conclusion Retaining the health of silver jewellery goes a long way in helping the silver jewellery hold on to its luster. There are a number of 925 cuff manufacturers and silver cuff wholesaler that can provide the best silver jewellery, however, maintaining it that way is the responsibility of the user.