NOVEMBER 10, 2021
OUTDOORS
THE SUN
17
Anatomy of a fishing rod Reel Time RUSTY CHINNIS
W
hatever rod you fish with, be it a spinning rod, a fly rod or a casting rod, they all share the basic components - blank, guides, reel seats and handles. So why is one rod more expensive than another? A rod’s blank is constructed from a product known as prepreg. This material is impregnated with resin and wrapped around a mandrel (which is removed after the blank is formed) giving the rod its basic round shape. This “blank” holds the guides, ferrules, handle, reel seat and fighting butt. Prepreg has fibers that have a unidirectional (straight) orientation. The fibers can be made of different materials including fiberglass, graphite, boron or Kevlar. Some rods are made (laid up) from a prepreg that has additional fibers that run around or at an angle to the unidirectional fibers. This gives the rod additional strength and influences flex, stiffness and price.
RUSTY CHINNIS | SUN
Rod choice becomes critical when choosing an outfit for demanding conditions A rod’s scrim refers to a lightweight material that forms an additional lining under the primary fibers and helps in working the material when it is wrapped around the mandrel. Scrim can be straight or woven and adds what is known as “hoop strength” to the finished rod. The butt section is the cork part of the rod behind the reel seat that is held either in the non-dominant
hand or fits into a fighting harness when playing a fish, while the handle is where the dominant hand is placed. The reel seat secures the reel to the rod. The fixed hood is the metal receiver where one end of the reel foot is placed. The sliding hood is the rear receiver that holds the other end of the reel foot. The locking ring is a nut that puts pressure on the sliding hood and holds the
reel securely in place. The guides hold the line along the length of the blank. The ferrules connect sections of a two- or four-piece rod. The tip, as the name implies, is the section at the top of the rod. You may also encounter the term taper. A rod’s taper refers to the diameter of a rod from the butt to the tip. The taper affects the rod’s action. Most rods have either a fast action (stiff) or a
slow action (flexible). When you’re shopping for a new outfit, knowing the parts and construction of a rod will help you make an informed decision. The most important part of the rod, and the one that most affects its price and your buying decision, is the blank. The materials and the method of construction of the blank determine its price. The least expensive rods are made from fiberglass while the expensive ones are constructed with graphite, boron and Kevlar. While fiberglass may be good for a beginner, the more expensive rods are a better choice for the seasoned angler. They are lighter, more responsive and less prone to break. But don’t let price determine your selection. There are a lot of very good rods on the market today that can be purchased at a good price point. The one thing to avoid is cheap equipment. It’s OK to buy a lower price point outfit if you’re a beginner, but choose an outfit that will make a good second rod when you upgrade. An informed decision can positively affect your angling efficiency and enjoyment.
