35 minute read
Exhibitor Preview Foodtech Packtech 2020 22nd - 24th September 2020, ASB Showgrounds Auckland
Foodtech Packtech (FTPT) is New Zealand’s largest food manufacturing, packaging and processing technology trade show. Running strong for over 20 years this free-to-attend event brings industry professionals and decision makers together providing a forum for education, discussion and the sharing of knowledge and expertise, critical in the sustainability and growth of the industry. We preview exhibitors at this event.
Air Solutions
Steril-Aire’s UVC shines a new light on food safety Steril-Aire’s proven, multi-patented UVC technology controls microbes that can contaminate food products and processes, increasing shelf life and profitability by providing continuous, non-chemical decontamination of food surfaces and the surrounding environment. Benefits of Steril-Aire: • Enhanced food safety • Extended product shelf life • Improved quality and production yields • Reduced recall and mitigation • Reduced sales loss, brand damage and liability • Operational efficiency • Delivers 99.9+% surface "kill" rates on pathogens • Reduces or eliminates mould and fungal Volatile Organic
Compounds (VOCs) that emanate from HVAC systems • Delivers continuous protection • USDA and FDA approval for surface decontamination • No labelling requirement • Reduces HVAC energy costs by up to 15% Applications: • Surface disinfection • Raw material decontamination • Storage rooms • Packaging and filling stations • Commercial refrigeration Whether you’re looking for an evidence-based infection prevention and control strategy, improved HVAC system performance, or clean air, we can help you design, implement and commission a cost-effective UVC system to meet your needs. Come meet Simon and the team to be entered into a draw to win a free full on-site assessment of your Air Solution needs valued at $2500.
Allnex Industrial Flooring
Allnex is dedicated to the pursuit of excellence in hygienic, durable, decorative, and chemical resistant floor and wall claddings. Allnex manufacture the market leading, Sureshield, Nuthane, Supascreed, Surechem Vinyl Ester, Situclad and Formwall systems to licensed applicators for right-first-time solutions. Allnex technical teams can visit your site, assess client needs and provide specific solutions to meet good manufacturing and internal/ external audit requirements. Allnex Systems are independently certified by- HACCAP, APAS and Fraunhoffer Cleanroom. Come and visit us at stand 3171.
Butler Techsense
With 20 years of experience in industrial instrumentation, Butler Techsense is a proven supplier of environmental monitoring solutions for pharmaceutical, GMP, medical, scientific and food production industries. Butler Techsense delivers field-proven technologies that can handle demanding conditions and challenges to allow you to maximise the performance, profitability and, most importantly the quality compliance aspects of your business. At Foodtech Packtech we will be featuring our range of measurement instrumentation, including thermometers, dataloggers, pH meters, wireless IoT solutions for food production, laboratories and warehouses. Apera Instruments design and make a large range of portable and laboratory pH and conductivity instruments suitable for use in the food and beverage industries. There will a selection of these on display. From cold chain storage and transport to high temperature pasteurisation, we have solutions to meet your operational and budgetary needs – including dataloggers from LogTag Recorders, Tempmate, Grant Instruments, Center and Tecnosoft. Tecnosoft manufacture probably the world smallest high temperature data logger, used in the food industry for pasteurisation and retort profiling. Our display will be featuring the IoT cloud HACCP solution for monitoring critical temperatures throughout food production service from our European partner, JRI. We will also be joined by our calibration partners, WIKA Instruments who are an IANZ accredited calibration laboratory. They will be available to discuss your calibration requirements for both on-site and field instrumentation. WIKA instruments also manufacturer a large range of process temperature and pressure sensors.
Paperless IoT HACCP Temperature Recording
• Wireless Recorders • Bluetooth thermometer • Cloud solution • Fully IANZ traceable • Multi location/user • Smartphone app
Foodtech Packtech 2020 Stand 3169
Anton Paar New Zealand
Anton Paar develops and manufactures analytical instruments that generate reliable data, enabling food companies to proceed with confidence in product development, production and quality control. Anton Paar is a world leader in the measurement of density, concentration of dissolved CO 2 /O 2 and in the field of material characterisation, viscometry/rheometry, process instrumentation and provides custom-tailored automation and robotic solutions. The products we supply to the food industry include: •
Adsorption Analyzer – measures high-resolution physisorption, chemisorption and vapour sorption isotherms for precise pore size, surface area, and specific gas/solid interactions.
Density Meter – Provides highest accuracy in density and concentration measurement.
Microwave Digestion – Digestion of samples (varying in difficulty or volume), evaporation, acid leaching, and extractions.
Ball Mill – Milling and homogenisation of samples ranging from soft, fibrous to hard and brittle materials.
Oxidation Stability – Determination of oxidation stability for vegetable oils and fats by using increased temperature and an excess of pure oxygen
Particle size Analyzer – Measures a wide range of particle sizes in liquid dispersions or dry powders.
Polarimeter – Measures the optical rotation and the concentration of optically active substances.
Raman Spectrometers – Identification of unknown substances, verification of samples, analysis of chemical composition or monitor their changes in the samples.
Rheometer/Viscometer – Checks over flow curve and yield point determinations to complex rheological investigations.
Refractometer – Measure the refractive index and concentration of liquids and solids.
Paulette and Robert Barnes with the latest standard Rexmoi ® Air Tray Dryer (Model D3/20/20-70/4)
Drying Solutions
The Rexmoi ® Air Tray Dryer is a multipurpose tool, designed and made in New Zealand, with the ability to control temperature and humidity when drying various products, cooking at low temperatures, and controlled cooling of products. Each Dryer is a sealed enclosed chamber, allowing control of the atmosphere within, using smart controls and refrigeration technology. All the trays and the inside of the Dryers are stainless steel. Air flow around the product is an important factor in how well the system works. Different trolleys and trays and variable air flow are available to optimise this. Filters are used to keep the air clean in the chamber. Dryers circulate their own air and do not introduce any outside air or discharge any product smells etc into the outside air – only water is released from the unit during drying. Product can be checked at any stage during the drying process and can be dried to the level of moisture content you require, including drying to a stage ready for grinding up to a powder. The dryers are all set up to go as a plug and play units and are very energy efficient, costing approximately $1/hour to run for the standard unit depending on local power costs. We have units available for hire to trial the dryers with your product. Currently Rexmoi ® Air Tray Dryers are being used to dry petfood, fruit slices, mussels, and leaves for tea. Trials have been done for drying tomatoes, herbs, fish, various nuts, and for cooking meringues. We look forward to seeing you at FTPT.
D & L Packaging are experts in vacuum packaging systems
D & L Packaging
Food waste is a recognised global problem and it is the responsibility of all food producers to be actively working towards reducing their waste. There are numerous ways that food waste can be minimised by everyone and at VACPACK™ we are serious about helping find solutions within the food production sector, from the largest manufacturers down to everyone at home and everyone in between. Food waste produces large amounts of methane gas, which (according to climate change experts) is one of the main contributing factors to greenhouse gases. We offer the expertise, systems and methods to keep food safe, fresh, tasty and natural for longer, without chemical preservatives. Of course, saving money on wasted food is also a great incentive for adopting smarter food handling, processing, packaging and storage habits. The methods and processes we offer to help achieve this goal for small and large food producers and households alike are: • Vacuum packaging systems and bags • Cook Chill technology and systems • Hot-dip shrink tanks • Specialised barrier bags, shrink bags and films • Tray Sealing, skin packing and MAP systems • Cooking/mixing kettles and Pneumatic Fillers • Cook tank/tumble chillers/blast chiller • Sous-Vide cooking systems • Tamper-evident seals and and shrink sleeve labels We have 20+yrs experience in the Packaging Industry and have aligned ourselves with international companies who specialise in these areas, allowing us to bring to New Zealand world-leading technologies for safer food handling and extended shelf life.
Bonson is a NZ manufacturer and supplier of worldclass food packaging with a focus on innovation, quality and sustainability. Bonson’s award-winning team operates superior injection moulding and in-mould labelling technologies under strict ISO protocols. Welcome to visit our stand 3030 Hall 3
Food Machinery Imports
Looking for a machine for a specific purpose? Food Machinery Imports will be on stand 3127 at FoodTech PackTech 2020. This year we have a slightly bigger presence at FTPT. We are focused on demonstrating to you not only machinery options available through us, but also the many types of parts and services we can offer. We will have some of our range of machinery and parts on display just to give you a glimpse of what we can offer you, including Catalogues, Machinery Flyers and information. We will also have video running showing some of the machines that are too big to display. So if you are looking for a machine for a specific purpose, please do not hesitate to ask as we may still have the information you are looking for. Our focus has always been you, the customer. To maintain production, you must have reliable machinery, parts and services. With budgets in mind, our machines, parts and services are at a good price point and can usually be delivered within a reasonable timeframe. Ask our helpful team what parts we have on stock at our warehouse – you may be surprised! If not in stock don’t hesitate to ask what the lead time may be. For many of the high turnover parts, if we don’t have them in stock our European Suppliers can deliver. Visit us at FoodTech PackTech and discuss your needs with us, we will ensure that you leave us with the information that you need.
EasiRecycling
Do you measure the ‘running cost’ of your waste bins? This may seem like a silly question but every bin could be costing you time, wasted liners and high waste collections costs. The traditional Waste Bin The typical waste bin comes in all sorts of shapes and sizes - some with liners, on wheels, static, lids, colours etc. But the one thing that most traditional bins have in common is that you cannot see the waste inside. While it may seem beneficial not to see dirty, smelly mixed rubbish, the truth is that it can have a negative impact. Often with traditional bins, the waste is mixed, meaning that it’s not correctly separated. However, even if a well-labelled coloured bin is used properly for recycling, black liners are often used. This makes it impossible to distinguish which type of waste stream is inside the bag once it leaves the bin Waste Stands with bags Waste stands bring a more modern approach to waste collection. Waste stands are cleverly designed so that every bag fits perfectly with no outside container to reduce the fullness of the bag. As the waste isn’t stored inside a container, the inside of the bag can easily be seen. They’re also more hygienic as the bag covers the stand and helps to keep it clean and fresh with all spillage staying inside the bag.
Eriez
With nearly 80 years experience, Eriez has built a reputation as world leader helping the food industry produce a safe and clean product. We design and manufacture metal separation, metal detection and materials feeding, screening, conveying and controlling equipment for the food processing and packaging industries. Eriez offer products to complement and safeguard your processing and packaging lines. These include the latest technologies in high recovery magnets and a full range of specialised vibratory feeders that provide cost-effective means to feed or screen large volumes of bulk materials. Our magnetic separators can be combined with state-of-the-art Eriez Xtreme metal detectors for superior performance in removing dangerous metal contamination. Eriez’ cuttingedge magnets, filters and detection technologies ensure product purity, protect process machinery, improve efficiency in processing and packaging operations and help you comply with HACCP International Food Safety Standards. Our qualified technicians can audit your complete process and recommend the best equipment for your needs, whilst providing expert advice. Please visit Eriez at FoodTech PackTech NZ, Stand 3042.
Waste bins or waste stands? See the difference
Visit Heat and Control on Booth #2042
Heat and Control Pty Ltd
Heat and Control will have experts on-hand to discuss our latest technologies and equipment for the snack and prepared food industries. We’re particularly excited to showcase our latest inspection capabilities. CEIA THS-MS21 Series Metal Detection Choosing the right inspection system allows you to comply with global safety standards, quality and safety conscious retailers. Protect your consumer, your brand, and your production line by using the most sophisticated metal detector in the market. Come see the world’s only multi-spectrum metal detector at Foodtech Packtech. Providing unique detection capability and extreme sensitivity to magnetic, non-magnetic, and even stainless steel metal contaminants. Some application examples: • Conveyed (in-line), pumped, or free-falling configurations • Fresh meat, poultry and cheese (strong product effects) • All manner of food products • Integrate with Ishida VFFS snack food bagmakers Ishida X-ray Inspection System Ishida X-ray inspection systems are also designed to comply with global safety standards. They provide vital information with accuracy and reliability and alert you when foreign bodies are contaminating your product. The Ishida IX series provide the highest level of quality assurance to processors and manufacturers and are ideal for countless applications such as packaged vegetables, cheese, candy, bread, cakes, dried fruits and nuts, and more. Using the latest sophisticated technology, they offer precise and reliable inspection with low investment cost. Heat and Control has an inspection solution to meet your specific requirement. Talk to us about Ishida Check weighing, Key Technology Optical Sorters and Graders or Oxipack Seal Testers. Visit us on Booth #2042.
Decades of science, imagination, and commitment that help bring your best products to market
Heat and Control has been on a mission to modernise equipment solutions since our founding in 1950. For 70 years, our passion for advancing the food, pharmaceutical, and other industries has guided our work. From the machinery we manufacture and the customers we serve, to our process breakthroughs and the partnerships we develop, we have always found new approaches, believed in bold ideas, and put people first. That is the essence of who we are and how we lead.
info@heatandcontrol.com Learn more > heatandcontrol.com/alwaysinnovating
Hunter Filling Systems
Hunter Filling Systems have over 57 years’ experience specialising in the design and manufacture of liquid filling systems and associated packaging equipment for a wide range of liquid viscosities or powdered products including foodstuffs, dairy products, cosmetics, pharmaceuticals, detergents, motor oils and a range of chemicals and solvents. Get your products efficiently and accurately into containers or packaging with one of Hunter Filling Systems fully customisable filling solutions. Simple to operate, easy to clean and uncomplicated to maintain, Hunter fillers provide a fast, accurate solution to meet your filling requirements. We can provide turnkey packing lines, so you deal with one supplier co-ordinating your entire project. What sets Hunter Filling Systems apart? • Filling accuracy • Filling speed
J L Lennard
Founded in 1879, J.L. Lennard is a family owned Australian company who distribute some of the world's leading brands of process, packaging and product inspection equipment for the beverage, confectionery, food and pharmaceuticals industries. J.L. Lennard do much more than just supply machines, we provide - Total Customer Support. From the initial consultation, we can assist in the planning, project management, turnkey engineering, training, commissioning and implementation of process and packaging lines. J L Lennard have a team of factory trained service engineers in Australia and New Zealand to fully support all equipment after final acceptance. We also offer a machine audit programme along with preventive maintenance programmes and together with a comprehensive stock of spare parts, we can carry out machinery overhauls and rebuilds. J L Lennard pride themselves on delivering on their promises and ensuring that customer expectations are fully met, they pay attention to the detail which is essential when planning extensive projects to ensure success. • Non-drip shut off nozzles • Ease of use • Customisation • After sales support for service, spare parts and innovation • Experience filling difficult products • New Zealand owned and operated Hunter Filling Systems can also provide a range of ancillary equipment, including, cap tighteners, conveyors, tub sealing and lidding machines, labelling, sampling devices and container handling equipment for unscrambling and accumulation. We are the New Zealand agent for USA based All-Fill Inc, Auger Fillers for powders, granules, and dry products up to 25kg. We have a team of highly skilled in-house engineers and tradespeople. Our wealth of experience and expertise will assist you in ensuring that your production goals are achieved. Come and see us at Foodtech Packtech 2020 in Hall 2, at Stand #2010.
The FUJI Alpha 8 Horizontal Flow Wrapper available from J L Lennard
Come and see us at Foodtech/Packtech trade show on the 22nd to 24th of September 2020 Stand # 3153
Mätt Solutions
Remember FF Instrumentation? Now relaunched as Mätt Solutions, the product range and ethos haven't changed, and the company still operates out of the same site as Formula Foods. When Mätt was created, Bob Olayo and Dave Rout decided the time was right to move some of the Formula Foods services, such as shelflife testing, under the Mätt umbrella. Formula Foods Corporation Ltd, www.formulafoods.co.nz, commenced business in 1987 in Christchurch. During the 1990s the business expanded into supplying a range of technical services, consultancy, ingredient labelling, shelf life improvement, then flavour and ingredient supply, and instrumentation. Techniques were developed to accelerate the ageing of food products through controlled atmosphere chambers - humidity and temperature control. Real time shelf-life was compared against the accelerated trials of many different food products, to determine methods to verify shelflife faster. From the mid -1990s the instrumentation division grew from specialising in water activity [a w ] to supplying an extensive range of equipment, and in 2012 became a separate business which after starting as ‘FF Instrumentation’, is now known as ‘Mätt Solutions Limited’. www. matt.nz In 2018, due to growth of both both businesses operating from one building, new premises were designed and built to house each business separately, side-by-side in the Wigram industrial subdivision. Formula Foods has now transitioned into a flavour house business, concentrating on flavour development and ingredients designed for specific clients’ projects. The area of R&D is now focused on formulation of flavours and ingredients with a large flavour laboratory and separate development lab. Shelf-life testing is now housed in the Mätt Solutions facility and ingredient labelling has been discontinued. "With almost 33 years serving the food industry, we endeavour to partner with our clients in order to fully understand and supply their needs." Bob Olayo, Dave Rout and the Mätt Solutions team are looking forward to chatting with you at FTPT about how they can support your business.
YOU CAN’T GET CLEAN AIR FROM A DIRTY HVAC SYSTEM
It’s like getting blood from a stone.
That’s why we focus on the hygiene of your entire ventilation system, from the air intake to the air supply grills in the factory. Our world-class technologies and trained service technicians ensure the air in your factory is pathogen-free.
To find out more visit www.prescoenvironmental.co.nz or contact the team on 0800 PRESCO (0800 773726)
Presco Environmental
‘Air hygiene’ focus from Presco Environmental at this year’s Foodtech Packtech We all know that the air inside our factory must be clean. If it isn’t, it will jeopardise product quality and company reputation sooner rather than later. However, there is so much more to clean air than meets the eye. Presco Environmental focus on air hygiene. “We are the essential partner of mechanical servicing in HVAC systems” says Matthew Prestidge, air quality advisor at Presco Environmental. “One thing is for sure, if a ventilation system is not mechanically sound, (fan belt gone, thermostat malfunction, or refrigerant leak) the red flags are up pretty fast and action will be taken. The reality is, the hygiene condition is just as important: we need clean air not just supply air”. Presco focus on the end-to-end hygiene of the entire ventilation system. So much focus is placed on the air filters but putting new filters into a ‘dirty’ HVAC system does very little to improve air quality, despite the money spent. Along with presenting their Total air-care service at the show, Presco are launching their new range of Radic8 air purifiers. These stand-alone or wall-mounted appliances have a 99.99% kill rate of airborne pathogens in a single air-pass and are perfect for localised airborne mould and pathogen hotspots in critical hygiene areas. Presco Environmental maintain hygienic factories for New Zealand’s world-class food producers. They have a team of experienced and trained mobile cleaning service technicians and supply a range of innovative cleaning products and technologies. They have a proactive, rather than a reactive approach to cleaning and believe that clean air should be a top priority for every food processing plant. Visit the Presco Environmental stand (3129) to discuss any questions or problems you have with HVAC or air quality in your plant and to go in the draw to win a Radic8 air purifier.
A Matcon typical IBC system process flow design
Matcon
Matcon, a division of IDEX MPT, Inc. has been a global leader in manufacturing systems for the efficient and flexible handling of powders, granules and tablets since 1980. Based around portable containers (Intermediate Bulk Containers or IBCs) for batch powder processing, our solutions are designed for production environments required to cope with varying order sizes, large recipe portfolios and more stringent industry regulations. Central to our Intermediate Bulk Container (IBC) technology is the Cone Valve, offering automatic and controlled discharge of virtually any powder type and proven to overcome issues of mix segregation, containment and bridging that are inherent in traditional powder handling systems. With a Matcon IBC system, you can eliminate the time-consuming cleaning normally associated with traditional static mixers as mixing takes place directly within the IBC. As the blender
Ngaio
Ngaio Diagnostics offers market leading microbiology, hygiene, allergen, food and drink testing solutions plus a unique range of cleaning and sanitiser systems. The wide range of products from market leading manufacturers allows Ngaio to deliver solutions that fully meet each customers’ requirements. Ngaio's range includes Hygiena's market leading EnSURE Touch ATP system. This new system features touch screen operation, cloud based software and unmatched performance. The device not only allows for ATP testing, but also micro and enzyme testing options. With global demand for hygiene verification now unmatched, Hygiena has established itself as the gold standard brand. Ngaio's range of allergen testing products offer high sensitivity and ease of use, facilitating quick and reliable results. The allergen portfolio includes an extensive range of rapid and ELISA kits including multiple Gluten options to suit customers’ requirements. All kits are fully validated for environmental and/or food sample analysis. Ngaio's latest offering is the Toucan ECO range of on-site sanitiser and cleaner production systems. These systems will produce the required volume of sanitiser/cleaner at a fraction of the cost of third-party manufactured products (approx. $0.03/L). Coupled with the benefits of using a non-toxic, non DG, environmentally friendly, and MPI approved solution the Toucan ECO range needs to be explored. Ngaio prides itself on being able to supply top class service to each and every customer. This includes ongoing technical support for all their customers. Contact Ngaio with any enquires, questions you may have or for technical assistance that you require. has no product contact parts to clean, recipe changeovers are virtually instantaneous. The flexibility to send IBCs to whichever downstream process is ready, means that manufacturing flow is optimised and output maximised, providing excellent ROI. Our diverse customer portfolio includes both large multi-national manufacturers as well as small and medium-sized enterprises (SMEs) who have embraced IBC system design. A leading spice blends contract manufacturer hygienically handles over 1,000 flavouring mixes and achieves a consistent 3 day ‘make to order’ regime without creating costly inventory. Whilst a high-quality bakery ingredients manufacturer producing high variety, low volume products has cut cleaning times between recipes from 480 to 70 man-hours, released cash by significantly reducing inventory and cut manufacturing times in half with single stage mixing. By changing your approach from fixed equipment to the right IBC System could save you time, money and your reputation.
Sanitation Verification. Designed for You.
Pack Tech Moulding
We understand that the environmental and economic choices we make today has an impact now and in the future. In recognising the need for sustainability, our focus is on being sure we provide the best commercially available sustainable options. This is reflected in our approach of ensuring all packaging manufactured by us is 100% recyclable and re-useable.
Our own range of moulded products includes nutraceutical, NDA Group are New Zealand's leading engineering/ fabrication, site installation and maintenance and equipment providers for the dairy, wine, water, industrial and food processing and horticultural, industries. We have permanent assembly, installation and maintenance services in Hamilton, Hawera, Rolleston and Timaru plus other NDA divisions in Blenheim and Invercargill. For you this means that, wherever you are in New Zealand, there will be a convenient option for you. NDA Equipment is an agent for several international ranges of process and packing equipment plus providing engineering equipment, including tube cutting and weld preparation. Some of these technologies are being showcased at Foodtech/Packtech. “Bag in Box” technology allows a the fully automated insertion of a bag into a box from a roll of polyethylene film. The high performance Flexim-31 automatically Smart Warehousing and Autonomous makes forms, cuts and inserts bags into Guided Vehicles cases, crates, trays, tins or pails. Block (AGV’s) are bottom or pillow packs are standard. It transforming the is also standard-equipped with a fully movement of goods automatic format change which means that multiple box sizes can be programmed into the machine for quick changeover. Smart Warehousing and Autonomous Guided Vehicles (AGV’s) are transforming the movement of both cartons of goods and fully packed pallets. NDA has a range of AGV’s to move goods in several formats of any weight up to 1500kg. Coupled with its smart pallet store and propriety WMS software efficiency of moving goods into and out of any located can be optimised. Talk to our Equipment team today and find out more about what NDA Group can provide for you.
industrial and food packaging and is available ex stock. We also offer a strong contract moulding service for customised packaging which include in mould labelling (IML). Pack Tech’s production facility is a certified critical hygiene facility which enables us to produce both food grade and non-food grade products. Pack Tech is an approved food safe provider with our quality and food safe
Group
procedures based on the HACCAP food safety programme.
Pack Tech Moulding includes nutraceutical, industrial and food packaging and is available ex stock
Peak Scientific Instruments
Peak gas generation New Zealand is your local supplier of highperformance nitrogen, hydrogen, oxygen and clean air gas and liquid generators for the food and beverage industry. With over two decades of pioneering reliable gas generator technology, backed by direct local support and service stock, Peak gas generation offer you on-site and on-demand gas and liquid – when you need it most. Our forte is in providing our customers with unrivalled peace of mind and hassle free; high quality, dependable gas generation solutions. From our all-in-one, tried and tested Genius 1053 Nitrogen generator for small bag-in-box application, hydrogen for food analysis by gas chromatography, to bespoke i-Flow Nitrogen and oxygen reticulated systems – tailored to meet your specific manufacturing demands including feeding, blanketing, purging, bottling, boxing and packaging. Our solutions are backed up by our direct technical support and on-going service care throughout the generator’s lifespan. With a rapid response, offices, warehousing and spare parts in NZ and Australia, we deliver a local service on a global scale.
A Peak gas generator is the practical and cost-effective alternative to pressurised cylinders and bulk liquid delivery supply. Traditional sources of gas incur on-going delivery, administrative and rental costs in addition to health and environment considerations, all of which impact your business’ bottom line. Peak offer a consultative approach to your specific gas requirements, including mixes, working collaboratively with machinery vendors and your preferred suppliers for gases that cannot be produced on-site (e.g.: for MAP, CO 2 , argon) in order to maximise your return on investment.
Pump and Machinery
Pump and Machinery and Verder are excited to be working together to display a broad range of pump options. Steve Helg from Pump and Machinery said: “After lockdown and all the issues with Covid we are really looking forward to talking to heaps of people about how we can help with their fluid pumping issues. We are going to have a great display of pumps so come and talk to us.” Stand 3166 will be the place to meet Steve and the team, to see industry-leading pumps from the world’s best hygienic pump manufacturers, including centrifugal pumps from Packo, lobe pumps from JEC, air operated double diaphragm pumps from Nomad and Wilden, progressive cavity pumps from Netzsch and drum pumps from Graco. Pump and Machinery are leaders in supplying pumps, meters and expertise to the New Zealand and South Pacific food and beverage industry. We also offer our customers full repairs and service capability from either our Auckland or Wellington workshops. Verder are a European based manufacturer of high quality hygienic and industrial
Sika food-friendly flooring
pumps, with particular expertise in the wine, beer and food industries. Unfortunately, due to Covid, it looks like the Verder team won’t be able to fly in for the show but come and see the Pump and Machinery team and enter our competition to win an AB’s jersey signed by Sonny Bill Williams.
Sika food-friendly flooring
For the production of quality foodstuffs, a clean working environment is of crucial importance. The key to this is the right selection of the floor, since it is always under stress from water and chemicals, variations in temperature, cleaning agents, etc. At the same time, the floor finish must meet the requirements for hygiene, health and safety. Sika has formed an alliance with other international suppliers and international experts in Clean room design – Fraunhofer IPA of Germany – to prepare a formal testing and certification process for materials used in critical manufacturing environments. Approved products are given a CSM (Clean Room Suitable) rating based on the following assessments: • Ability to be clean and sanitised • Biological resistance • Fungi resistance • Chemical resistance • Out gassing – volatile emissions and TVOC (Total Volatile Organic
Compounds) • Emissions of hazardous compounds • Particulate emissions in simulated use conditions Sika has a wide range of floor and wall finishes that come with the CSM certification and their Clean Room Certified materials, assessed by Fraunhofer IPA of Germany, are more rigorously scrutinised than local clean room standards. The Fraunhofer IPA testing regime is extremely thorough and is designed to ensure the environment is safe and no undesirable chemical or material is released into the product or manufacturing environment. “We have the advantage,” Sika says, “as we have a full range of Clean Room Certified products – sealants, flooring systems and coatings.” Find out more at Sika’s Stand 2078 at Foodtech Packtech 2020.
Selpak Automation
Making local servicing accessible All manufacturers need to service their production lines to ensure the greatest possible production reliability levels over the entire life cycle. And in a time before hand sanitisers were commonplace at every front door, most relied on specialists flown in from overseas. With recently closed borders due to COVID-19, it meant no one could enter New Zealand to install or service these machines, which was bad news for local manufacturing needing technical assistance. Shane Sipthorp, Owner and Managing Director of Selpak Automation spoke about his experiences since the border closures came into effect in New Zealand on 19 March 2020. “Our service engineers are factory trained at the OEM and we install and service over a hundred machines each year. They know their stuff.” “I had eight service engineers in Australia and was unable to send any of them to assist our New Zealand team due to lockdowns.” “Now that we have increased our service staff in New Zealand, we can make sure our extensive customer base is well-supported without relying on our Aussie team members.” And with post-COVID19 times focused on local manufacturing to kickstart the economy, skilled specialist support, now only a short drive away, couldn’t have come soon enough. Shane and his team will be exhibiting once again at this year’s FoodTech PackTech exhibition, showcasing Buhler’s new optical sorting equipment on stand #2029.
Food Tech Solutions
A Focus to Food Safety! Food Tech Solutions is a niche supplier, since 1998, of instruments and consumables for quality testing solutions for food, dairy, beverage, and research industries within New Zealand. Food Tech’s foundation in Food Safety is based on delivering highstandard, quick solutions combined with rapid essential technical expertise and superior service. The cornerstone of our slick Auckland operations facility, is the expedited distribution of product, rapid swap-out loan instruments, and our exceptional evaluation lab for all your trial work. The essence of what we do is that we fulfill demand within the food industry as a great source of products that contribute to food safety/ quality programmes, ensuring New Zealand produces only quality products with maximum shelf-life, whilst minimising recalls! “We say what we do and deliver over and above what is expected!” Our Product Range: • ATP Detection Systems – Superior science for advanced hygiene control – Charm Sciences • Pasteurisation Confirmation – All animal milk and soft cheeses –
Charm • Product Sterility Testing – EPIC, UHT products – Charm • Rapid Antibiotic Residue Testing - Raw milk, and other food matrices – Charm • Enzymatic Test Kits – Wine, brewing, food/nutritional, biofuel –
Megazyme • Production Enzymes –
Industrial enzymes for food, wine, brewing, olive industries – DeltaGen • Texture Analysis - Food & foodstuff profiling, testing packaging – Stable Micro
Systems • Allergens – Wide range of
ELISA rapid tests: food and environmental swabs • Metal Detectable & X-Ray
Visible Products – Quality products for manufacturing environments Food Tech will again be at FoodTech PackTech, showcasing new and existing products. Visit Stand 3130; start a conversation about how we can facilitate your quality control.
Stable Micro Systems are world leaders in texture analysis
Phil-Stic Labels
Phil-Stic Labels was established in 1981 by Phil Fewings. We will be celebrating our 40 years of operation next year, in supplying quality products, services and innovations to all our customers. Phil-Stic is a family owned and operated company, based in Te Atatu, West Auckland. Phil-Stic Labels is a renowned market leader of innovative print and specialised label solutions. New technologies, materials and processes are constantly researched and developed. Incorporated into this ongoing product evolution are solutions developed as requested by our customers for their specific requirements. We specialise in Multi-web, Multi-layered and Multifold(booklet) labelling solutions. Phil-Stic Labels services a large number of customers across Australia, New Zealand and the Pacific Islands, with our labels being seen worldwide on those customers' products. Our labels are produced for use primarily in the food and beverage, dairy, agriculture, horticulture, chemicals and animal health industries.
Spray Nozzle Engineering supply a complete range of spraying equipment
Spray Nozzle Engineering
Spray Nozzle Engineering is New Zealand’s leading manufacturer and supplier of industrial spray nozzle technology to the New Zealand food, beverage, pharma, wine and packaging industries for over 25 years. As a local innovation company they can supply solutions to spray fluid and air or a combination of both to optimise your production, for applications involving coating, cleaning, blowing, washing and more. They have spraying technology to help save water, chemicals, time, energy and of course money. Total spraying solutions for spray drying, CIP (Clean In Place), spray nozzles, air knives, blowing guns, wash down guns, stainless steel hose reels and foaming-sanitising equipment, automatic spraying and coating equipment and more. If you are a manufacturer, customised spray nozzle systems can be supplied to suit your needs, with solutions improving safety, productivity and quality. As the only New Zealand developer of spray dry nozzle and check valve technology, as well as Tank Washing Nozzles, developed locally and sold globally, they are proud of supporting kiwi dairy, food and beverage industries for over two decades. Reel Tech, also a division of Spray Nozzle, offers Hose Reel Technology in stainless steel, for safer wash-down applications, and large custom CIP hose reels for dairy and product transfer applications. Spray Nozzle can also provide complete Washdown Packages. Spray Nozzle Engineering and Reel-Tech will continue to develop innovations for the dairy, food and beverage, winery and packaging process industries, being at the forefront of spraying, cleaning and blowing technology for New Zealand industry. Come and visit us at stand No. 3136 For more information about our product range, visit our website: spraynozzle.co.nz
Temprecord
Providing confidence in your data for food safety and compliance Temprecord is happy to join the many companies showcasing their products at this year’s Foodtech Packtech expo. Increasingly, the many regulatory bodies that govern the global food and beverage industry require temperature traceability and compliance (HACCP) records that must be made available from the start of a manufacturing process and right through the entire logistics chain, until the end-client receives the product or service. Temprecord International Ltd, a global exporter of New Zealand manufactured products, has supplied the food processing and logistics industry for 27 years. Temprecord’s temperature and humidity data loggers, real-time monitoring and cold chain transport solutions are used to monitor food safety and facilitate regulatory compliance throughout the activities of manufacturing, storage and transit. The Temprecord difference: Temprecord is accredited to ISO/IEC 17025 Calibration Laboratory standards. Calibration corrections are built into Temprecord logger firmware, so the data downloaded is accurate to within 0.2ºC. This means the user does not have to add a correction formula to the data, avoiding the potential for human error or omitting the correction altogether, therefore saving time and money and providing peace of mind. Temprecord products are renowned for their reliability and accuracy, and the company has a terrific reputation for service and support. Temprecord loggers are used to monitor food during: • Processing • Testing • Storage • In transit Statistics are automatically calculated for: • Rate of cooling • PHI (Process Hygiene Index) • Refrigeration index • Total temperature values
Universal Packaging
Welcome to Universal Packaging. We are passionate about leading the thought behind and wrap around our nation’s pallets. It’s how we look beyond the package to the products, processes and potential of our clients. It’s why we now lead New Zealand in specialised pallet wrapping film and stretch wrap machinery. Our approach to each task starts and finishes with a dedication to quality service. At Universal we will always treat our customers in a way they would want to be treated. As a team we’re always working with the business goals of every customer front of mind. That’s why we’ll only recommend a product or process if we can prove it will achieve these goals. Why we’ll always work with the integrity of our reputation in mind. Why we never settle for second-best. It is a company-wide ethos – the reason why we bind together so New Zealand can send secure. It is non-negotiable standard that delivers purpose to our work and peace of mind to our customers. Come and visit us this at this year's Foodtech Packtech Show on stand 3110 where we will be showcasing our range of Spinny pallet wrapping machines. Spinny Italian machinery has been trusted by New Zealand customers for nearly 10 years and has been wrapping the nation's pallets right and tight.
