EXPLODED VIEW

DETAIL A Exploded Blown Up

Legend

01. Minor Y Channel – MS Section with Bolt Holes on Flaps

02. Minor X Channel – MS Section with Routing to insert Bolt Head

03. Ceiling Panel with MS Frame – Ferforated Gypsum Board

04. Major Grid Channel – MS Section With Bolt Holes and Routing

05. Anchor Plate to fasten Grid Connector to Slab – with 4mm concrete screws

06. Ceiling Drop MS pipe – 19mm dia 16 Guage – with threading on one end

07. MS pipe with internal thread to adjust drop level

08. Ceiling Grid Connector with Routing on all 4 sides to insert Major Grid Channel Bolt Head

09. MS frame for ceiling Panel – with clip in joinery to attach to ceiling Grid

10. Panel Top Frame – Aluminium Extruded Section

11. Acoustic Vertical Panel – Fibre Cement Board – 20mm thick

12. Panel Side Frame – Aluminium Extruded Section – with space for electrical connectivity

13. Electrical Panel – with wiring provision and switch board slot

14. L cleat to join panel frame – 2mm thick GI

15. Panel Bottom Frame – Aluminium Extruded Section – with threading for leveling foot and side skirting

16. Leveling foot to stabilise and pressure tight vertical panels into Ceiling Grid

CEILING GRID Exploded Detail

DETAIL B Exploded Blown Up

DETAIL C Exploded Blown Up

VERTICAL PANEL WITH FRAME Exploded Detail

Why Space2 Grid

SPACE2 GRID System provides the flexibility to rearrange the panels within the grid at the ease and convenience of adjusting the leveling foot, and at no extra cost as panels are not structurally anchored to floor or walls.

Hence, once the ceiling grid is installed, its an easy job to assemble, disassemble or reassemble the panels to create spaces according to the changing demand of users and functions.