Hanieh Arefian
Commercial Design - Los Angeles, CA
Lunch Room Design - Los Angeles, CA Finished Project
Previous Condition
Commercial Design - Los Angeles, CA
℄
FD
36" DOOR 34" MIN. CLR.
30" X 48" CLEAR SPACE
MIN.
CLR.
℄
FD
EXISTING
22" DOOR
℄ ℄
℄
FD
24" DOOR
24" DOOR
FLOOR FINISH PLAN
GENERAL NOTE :VERIFY ALL DIMENSIONS AND CONDITIONS SHOWN ON DRAWINGS BY TAKING FIELD MEASUREMENTS, PROPER FIT AND ATTACHMENT OF ALL PARTS IS REQUIRED. BEFORE COMMENCING WORK, CHECK ALL LINES AND LEVELS INDICATED AND SUCH OTHER WORK THAT HAS BEEN COMPLETED. SHOULD THERE BE ANY DISCREPANCIES, IMMEDIATELY REPORT TO THE DESIGNER FOR CORRECTION OR ADJUSTMENT. IN EVENT OF FAILURE TO DO SO, THE CONTRACTOR SHALL BE RESPONSIBLE FOR CORRECTION OF ANY ERRORS.
C: LED PERIMETER WALL GRAZER, (4" X 5" H.) FOCAL POINT #FSM4L-FL-275-3500K-90 CRI.
PROVIDE NEW GYP. BD. @ CEILING, TAPPED AND PREP SMOOTHLY TO RECEIVE NEW FINISH.
#LED-3500K-80CRI-62W.
NOT USED
HVAC DIFFUSER- REFER TO MEP DWGS FOR SPEC. CEILING MOUNTED DOOR SENSOR
D
FD
OS
DIMMER SWITCH @
Renovation of Pub
PROVIDE NEW 3'-0" X FULL HT. SOLID CORE WOOD VENEER DOOR (WD-1W/HORIZONTAL GRAIN DIRECTION) WITH NEW CLEAR ANODIZED ALUMINUM FRAME AND HARDWARE SET (ELECTRIC STRIKE, CLOSER & 2-PAIR OF HINGES) WITH CEILING MOUNTED MOTION SENSOR FOR AUTO DOOR RELEASE. LEVER TO BE SCHLAGE 'L' SERIES IN SATIN CHROME FINISH.LEVER STYLE 017.
D1 - RECESSED LED DOWNLIGHT (4 1/2" X 4 1/2" SQUARE): FOCAL POINT LED ID DOWNLIGHT, 4.5" APERTURE SQUARE DOWNLIGHT WITH SQUARE OVERLAP TRIM #FL44-TRIM-11LED HOUSING: 9 WATTS. 3500K.
LINEAR DIFFUSER- REFER TO MEP DWGS FOR SPEC.
2029 CENTURY P 32ND & 33RD FL LOS ANGELES, C
PROVIDE NEW GYP. BD. @ ALL PARTITIONS AND PREP TO RECEIVE NEW FINISH.
Ca: LED LIGHTED MIRROR ELECTRIC MIRROR, LLC - LED LIGHTED MIRROR WITH TWO VERTICAL, SANDBLASTED ILLUMINATED EDGES.
COORDINATE AND ALIGN LOCATION OF ALL SPRINKLER HEADS WITH NEW LIGHTING. SPRINKLER HEADS TO BE CONCEALED W/FACTORY PAINTED CAPS TO MATCH DRYWALL CEILING PAINT FINISH.
Inspiration: Creating Timeless, Modern Space
PARTITION PLAN NOTES
REFLECTED CEILING PLAN NOTES:
GENERAL NOTE :VERIFY ALL DIMENSIONS AND CONDITIONS SHOWN ON DRAWINGS BY TAKING FIELD MEASUREMENTS, PROPER FIT AND ATTACHMENT OF ALL PARTS IS REQUIRED. BEFORE COMMENCING WORK, CHECK ALL LINES AND LEVELS INDICATED AND SUCH OTHER WORK THAT HAS BEEN COMPLETED. SHOULD THERE BE ANY DISCREPANCIES, IMMEDIATELY REPORT TO THE DESIGNER FOR CORRECTION OR ADJUSTMENT. IN EVENT OF FAILURE TO DO SO, THE CONTRACTOR SHALL BE RESPONSIBLE FOR CORRECTION OF ANY ERRORS.
THE DOOR HAS AN ELECTRIC LATCH WHICH IS UNLATCHED WHEN A PERSON INSIDE THE TOILET ROOM APPROACHES THE DOOR BY CEILING MOUNTED MOTION SENSOR INSIDE THE RESTROOM, ELIMINATING THE LATCH AND THEREFORE ELIMINATING THE CODE REQUIREMENT FOR THE 12" PUSH SIDE CLEARANCE. THE ELECTRICAL LATCH AND SENSOR ARE CONNECTED TO THE EMERGENCY CIRCUIT AND BUILDING EMERGENCY GENERATOR.
℄
OF WALL TILE
CEILING MOUNTED OCCUPANCY SENSOR HVAC DIFFUSER
WALL & FLOOR FINISH PLAN NOTES
1. REFER TO INTERIOR ELEVATIONS. 2. PROVIDE HYDRO BAN WATER PROOFING/CRACK ISOLATION MEMBRANE MFG. BY LATICRETE OR APPROVED EQUAL, CONFIRM WITH OWNER'S CONSULTANT.
ITEM: MATERIAL: LOCATION: SUPPLIER/MFG.: SIZE: GROUT: FINISH: INSTALLATION: BASE:
PT-1 PORCELAIN TILE PORCELAIN TILE #C220400361 - BLACK MAX NATURE 12"X24" FLOOR PORCELANOSA 12"X24" MINIMAL - COLORSTUK NEGRO EPOTCH/EPOXY GROUT MATTE THINSET TILE
SCALE: 3/8" = 1'-0"
REPRESENTATIVE: NOTES:
YVONNE BOURQUE (310) 300-2090, YBOURQUE@PORCELANOSA-USA.COM 1. MATERIAL INCLUDING 10% ATTIC STOCK TO BE PROVIDED BY OTHERS.
ITEM: MATERIAL: LOCATION: SUPPLIER/MFG.: SIZE: GROUT: FINISH: INSTALLATION:
PT-1A PORCELAIN TILE PORCELAIN TILE #C220400361 - BLACK MAX NATURE12"X24" FLOOR PORCELANOSA 4"X24" MINIMAL - COLORSTUK NEGRO EPOTCH/EPOXY GROUT MATTE THINSET
REPRESENTATIVE: NOTES:
YVONNE BOURQUE (310) 300-2090, YBOURQUE@PORCELANOSA-USA.COM 1. SCORE PT-1 TO 4"X 24" SIZE 2. MATERIAL INCLUDING 10% ATTIC STOCK TO BE PROVIDED BY OTHERS.
ITEM: MATERIAL: LOCATION: SUPPLIER/MFG.: SIZE: GROUT: FINISH: INSTALLATION:
PT-2 PORCELAIN TILE PORCELAIN TILE #P34706141 - BORNEO BLUE PV 12"X35" WALL PORCELANOSA 12"X35" MINIMAL - COLORSTUK ANTRACITA EPOXY GROUT GLOSS THINSET
REPRESENTATIVE: NOTES:
YVONNE BOURQUE (310) 300-2090, YBOURQUE@PORCELANOSA-USA.COM
REPRESENTATIVE: NOTES:
YVONNE BOURQUE (310) 300-2090, YBOURQUE@PORCELANOSA-USA.COM 1. MATERIAL INCLUDING 10% ATTIC STOCK TO BE PROVIDED BY OTHERS.
ITEM: LOCATION: MANUFACTURER: NUMBER/COLOR:
OBERFLEX PARTITION SEE ELEVATION CPS GARTEN CORPORATION GATOR WOOD COLLECTION BLACK OAK 991-SATIN JENIFER ANDOE 949-455-1600 x 121 1. PROVIDE PVC EDGE
LOCATION: SPECIES:
SEE ELEVATION
℄
DOOGE VENNERS INC. OR APPROVED EQUAL. LOG # 4222
NOTES:
1.SUBMIT VENEER FLITCHES & (4) 12" X 12" X 1/4" WOOD
SLOAN CUSTOM LAVATORY
LOCATION:
SEE FLOOR FINISH PLAN/ELEVATION
MANUFACTURER:
SLOAN
MATERIAL:
CORIAN COLOR: DESIGNER WHITE
Issue Description
DEMOLITION PLAN NOTES
GENERAL NOTE :VERIFY ALL DIMENSIONS AND CONDITIONS SHOWN ON DRAWINGS BY TAKING FIELD MEASUREMENTS, PROPER FIT AND ATTACHMENT OF ALL PARTS IS REQUIRED. BEFORE COMMENCING WORK, CHECK ALL LINES AND LEVELS INDICATED AND SUCH OTHER WORK THAT HAS BEEN COMPLETED. SHOULD THERE BE ANY DISCREPANCIES, IMMEDIATELY REPORT TO THE DESIGNER FOR CORRECTION OR ADJUSTMENT. IN EVENT OF FAILURE TO DO SO, THE CONTRACTOR SHALL BE RESPONSIBLE FOR CORRECTION OF ANY ERRORS.
GENERAL NOTE :VERIFY ALL DIMENSIONS AND CONDITIONS SHOWN ON DRAWINGS BY TAKING FIELD MEASUREMENTS, PROPER FIT AND ATTACHMENT OF ALL PARTS IS REQUIRED. BEFORE COMMENCING WORK, CHECK ALL LINES AND LEVELS INDICATED AND SUCH OTHER WORK THAT HAS BEEN COMPLETED. SHOULD THERE BE ANY DISCREPANCIES, IMMEDIATELY REPORT TO THE DESIGNER FOR CORRECTION OR ADJUSTMENT. IN EVENT OF FAILURE TO DO SO, THE CONTRACTOR SHALL BE RESPONSIBLE FOR CORRECTION OF ANY ERRORS.
REFLECTED CEILING PLAN NOTES:
COORDINATE LOCATION OF HORIZONTALLY MOUNTED OUTLET AT CENTER LINE OF TILE - REFER TO INTERIOR ELEVATIONS.
DEMO ALL EXISTING WALL FINISHES, FLOOR FINISHES, CEILING, LIGHTING, LIGHT SWITCHES, HVAC DIFFUSSERS/GRILLS/ TOILET PARTITIONS/ ACCESSORIES AND ALL PLUMBING FIXTURES IN RESTROOMS.
PROVIDE ELECTRICAL FOR AUTOMATIC WATER AND SOAP DISPENSER BELOW SINK.
FOCAL POINT #FSM4L-FL-275-3500K-90 CRI. WALL. MAINTAIN SHAFT WALL RATING.GENERAL NOTE :VERIFY ALL DIMENSIONS AND CONDITIONS SHOWN ON DRAWINGS BY TAKING F DEMO FURR-OUT WALL FORLED PAPER DISPENSER BACK TO SHAFT
ELECTRICAL PLAN LEGEND:
JOHN AYKROYD 847-233-2026 JOHN.AYKROYD@SLOANVALVE.COM
ITEM: MATERIAL: LOCATION: SUPPLIER/MFG.: SIZE: GROUT: FINISH: BASE: NOTES:
WALL AND FLOOR FINISH PLAN SCALE: 3/8" = 1'-0"
STONE THRESHOLD ABSOLUTE BLACK GRANITE SEE FLOOR FINISH PLANS (THRESHOLD) LOCAL 3/4" SLAB 1/16" POLISHED - SLIP RESISTANCE CO-EFFICIENT SHALL BE .90 MAX. N/A 1. MATCH A&A CONTROL SAMPLE 2. PROVIDE CRACK ISOLATION MEMBRANE 3. DIMENSIONS INDICATED FOR TILE AND SLAB ARE ACTUAL DIMENSIONS 4. PROVIDE SEALER OVER TILES AND SLABS AFTER GROUT INSTALLATION
5
HVAC DIFFUSER- REFER TO MEP DWGS FOR SPEC.
Scale:
PROVIDE NEW GYP. BD. @ ALL PARTITIONS AND PREP TO RECEIVE NEW FINISH. Issue Date:
#LED-3500K-80CRI-58W.
NOT USED.
PROVIDE NEW 3'-0" X FULL HT. SOLID CORE WOOD VENEER DOOR (WD-1 W/HORIZONTAL GRAIN D BUILDING STANDARD HARDWARE, (REFER TO INTERIOR ELEVATIONS). LEVERAllTO BE SCHLAGE Drawings, And Written 'L' Ma NEW PLUMBING WALL PUSHED BACK AS FAR AS POSSIBLE APPROX. 10"
DIMMER SWITCH
NEW PLUMBING WALL PUSHED BACK AS FAR AS POSSIBLE APPROX. 1'-6"
LINEAR DIFFUSER
3
SCALE: 3/8" = 1'-0"
Original And Unpublished W And May Not Be Duplicated, Without Written Consent Of A Than The Specified Building Been Prepared And Develop Sheet Title:
NEW PLUMBING WALL PUSHED BACK AS FAR AS POSSIBLE APPROX. 1'-3" LEAVING ENOUGH SPAC NEW WALL TO MATCH EXISTING. Working Plan
CEILING MOUNTED DOOR SENSOR
ELECTRICAL PLAN
6-9
PROVIDE NEW GYP. BD. @ CEILING, TAPPED AND PREP SMOOTHLY TO RECEIVE NEW FINISH.
D1 - RECESSED LED DOWNLIGHT (4 1/2" X 4 1/2" SQUARE): FOCAL POINT LED ID DOWNLIGHT, 4.5" APERTURE SQUARE DOWNLIGHT WITH SQUARE OVERLAP TRIM #FL44-TRIM-11LED HOUSING: 9 WATTS, 14AMP. 3500K. D
LINEAR DIFFUSER- REFER TO MEP DWGS FOR SPEC.
HA Drawn By: IS REQUIRED. BEFORE COMMENCING WORK, CHECK ALL LINES AND LEVELS INDICATED AND SUC ReviewedOR By: ADJUSTM FA ANY DISCREPANCIES, IMMEDIATELY REPORT TO THE DESIGNER FOR CORRECTION Project No.: S:\ RESPONSIBLE FOR CORRECTION OF ANY ERRORS.
Ca: LED LIGHTED MIRROR ELECTRIC MIRROR, LLC - LED LIGHTED MIRROR WITH TWO VERTICAL, SANDBLASTED ILLUMINATED EDGES.
COORDINATE AND ALIGN LOCATION OF ALL SPRINKLER HEADS WITH NEW LIGHTING. SPRINKLER HEADS TO BE CONCEALED W/FACTORY PAINTED CAPS TO MATCH DRYWALL CEILING PAINT FINISH.
NOTES:
PARTITION PLAN NOTES
C :LED PERIMETER WALL GRAZER (4" X 5" H)
GENERAL NOTE :VERIFY ALL DIMENSIONS AND CONDITIONS SHOWN ON DRAWINGS BY TAKING FIELD MEASUREMENTS, PROPER FIT AND ATTACHMENT OF ALL PARTS IS REQUIRED. BEFORE COMMENCING WORK, CHECK ALL LINES AND LEVELS INDICATED AND SUCH OTHER WORK THAT HAS BEEN COMPLETED. SHOULD THERE BE ANY DISCREPANCIES, IMMEDIATELY REPORT TO THE DESIGNER FOR CORRECTION OR ADJUSTMENT. IN EVENT OF FAILURE TO DO SO, THE CONTRACTOR SHALL BE RESPONSIBLE FOR CORRECTION OF ANY ERRORS.
WALL MOUNTED DUPLEX ELECTRICAL OUTLET @ ℄OF TILE REPRESENTATIVE:
2029 N
FD
FINISH SAMPLES FOR A&A REVIEW & APPROVAL. ITEM:
CENTURY PA
FD
REFLECTED CEILING PLAN NOTES
QUARTED FIGURED FUMED EUCALYPTUS CATALYZED LACQUER - SATIN SHEEN
SUPPLIER: FLICH NUMBER:
℄
ELECTRICAL PLAN NOTES
WOOD VENEER
ITEM:
℄
Previous Condition
2. MATERIAL INCLUDING10% ATTIC STOCK TO BE PROVIDED BY OTHERS. ITEM:
℄
+36"
FULL TILE
PT-3 PORCELAIN TILE PORCELAIN TILE #P34704921 - BRUNEI BLANCO PV 12"X35" WALL PORCELANOSA 12"X35" MINIMAL - COLORSTUK ANTRACITA EPOXY GROUT GLOSS THINSET
NOTES:
SCALE: 3/8" = 1'-0"
℄
1. MATERIAL INCLUDING 10% ATTIC STOCK TO BE PROVIDED BY OTHERS.
REPRESENTATIVE:
2
PARTITION PLAN
℄
℄
ITEM: MATERIAL: LOCATION: SUPPLIER/MFG.: SIZE: GROUT: FINISH: INSTALLATION:
FLOOR FINISH FINISH:PLAN
4
REFLECTED CEILING PLAN
WALL & FLOOR FINISH PLAN SPECS.
GENERAL NOTE :VERIFY ALL DIMENSIONS AND CONDITIONS SHOWN ON DRAWINGS BY TAKING FIELD MEASUREMENTS, PROPER FIT AND ATTACHMENT OF ALL PARTS IS REQUIRED. BEFORE COMMENCING WORK, CHECK ALL LINES AND LEVELS INDICATED AND SUCH OTHER WORK THAT HAS BEEN COMPLETED. SHOULD THERE BE ANY DISCREPANCIES, IMMEDIATELY REPORT TO THE DESIGNER FOR CORRECTION OR ADJUSTMENT. IN EVENT OF FAILURE TO DO SO, THE CONTRACTOR SHALL BE RESPONSIBLE FOR CORRECTION OF ANY ERRORS.
CONSTELLATION
WALL FINISH PLAN
MAX.
Commercial Restroom Design - Century City, CA
REFLECTED CEILING PLAN NOTES
CENTURY P TOWERS
Women's Res PROVIDE MINIMUM CLEARANCE OF 5'- 6 1/8" TO FINISHED FACE OF SHAFT WALL OR ALTERNATIVE HIGH RECESSED KICK.
1
DEMOLITION PLAN
FURR-OUT WALL AS REQUIRED TO ACCOMMODATE NEW TRASH RECEPTACLE.
SCALE: 3/8" = 1'-0"
Floor No.:
Sheet No.: 1 1/2" RECESSED CHANNEL TO RECEIVE 1/2" THICK GLASS MATERIAL AS DIVIDER.
PROVIDE 24" DOOR PULL @MECHANICAL ROOM SIMILAR TO GRAB BARS @ADA STALL. PATCH HO GRAB BAR - BOBRICK 11 4" DIAMETER STAINLESS STEEL GRAB BARS WITH SNAP FLANGE #B-5806 x
WALL FINISH PLAN WALL & FLOOR FINISH PLAN SPECS.
REFLECTED CEILING PLAN SCALE: 3/8" = 1'-0"
4
PARTITION PLAN SCALE: 3/8" = 1'-0"
Commercial Restroom Design - Century City, CA
Spa & Health Center Design Proposal
Commercial Desogn - Century City, CA
Boutique Hotel Design Proposal - Montreal, Canada
Inspirartion
Boutique Bar Design Proposal - Manhattan, NY
Corporate Office Design - Manhattan, NY
Inspiration
Residential Projects
Residential Remodeling & Design - Newport Coast, CA
Residential Remodeling & Design - Newpoer Coast, CA
Residential Remodeling & Design - Playa Vista, CA