Argon Distributors Catalogue 2020 by Argon Distributors

Welcome to the 2020 Catalogue

PRODUCT CATALOGUE

Terms and Conditions Index

Argon Distributors – Terms & Conditions of Trade

1. 1.1 1.2 1.3 1.4

Definitions “Argon” means Argon Distributors Limited T/A Argon Distributors, its successors and assigns or any person acting on behalf of and with the authority of Argon Distributors Limited T/A Argon Distributors. “Client” means the person/s buying the Goods as specified in any invoice, document or order, and if there is more than one Client is a reference to each Client jointly and severally. “Goods” means all Goods or Services supplied by Argon to the Client at the Client’s request from time to time (where the context so permits the terms ‘Goods’ or ‘Services’ shall be interchangeable for the other). “Price” means the Price payable for the Goods as agreed between Argon and the Client in accordance with clause 5 below.

2. 2.1 2.2 2.3

Acceptance The Client is taken to have exclusively accepted and is immediately bound, jointly and severally, by these terms and conditions if the Client places an order for or accepts delivery of the Goods. These terms and conditions may only be amended with Argon’s consent in writing and shall prevail to the extent of any inconsistency with any other document or agreement between the Client and Argon. None of Argon’s agents or representatives are authorised to make any representations, statements, conditions or agreements not expressed by the manager of Argon in writing, nor is Argon bound by any such unauthorised statements. The Client acknowledges and accepts that the supply of Goods for accepted orders may be subject to availability and if, for any reason, Goods are not or cease to be available, Argon reserves the right to vary the Price with alternative Goods as per clause 5.2. Argon also reserves the right to halt all Services until such time as Argon and the Client agree to such changes.

2.4 3. 3.1

Electronic Transactions Act 2002 Electronic signatures shall be deemed to be accepted by either party providing that the parties have complied with Section 22 of the Electronic Transactions Act 2002 or any other applicable provisions of that Act or any Regulations referred to in that Act.

4. 4.1

Change in Control The Client shall give Argon not less than fourteen (14) days prior written notice of any proposed change of ownership of the Client and/or any other change in the Client’s details (including but not limited to, changes in the Client’s name, address, contact phone or fax number/s, or business practice). The Client shall be liable for any loss incurred by Argon as a result of the Client’s failure to comply with this clause.

5. 5.1

Price and Payment At Argon’s sole discretion the Price shall be either: (a) as indicated on any invoice provided by Argon to the Client; or (b) the Price as at the date of delivery of the Goods according to Argon’s current price list; or (c) Argon’s quoted price (subject to clause 5.2) which will be valid for the period stated in the quotation or otherwise for a period of thirty (30) days. Argon reserves the right to change the Price if a variation to Argon’s quotation is requested. Any variation from the plan of scheduled Services or specifications of the Goods (including, but not limited to, any variation as a result of fluctuations in currency exchange rates or increases to Argon in the cost of taxes, levies, materials and labour) will be charged for on the basis of Argon’s quotation, and will be detailed in writing, and shown as variations on Argon’s invoice. The Client shall be required to respond to any variation submitted by Argon within ten (10) working days. Failure to do so will entitle Argon to add the cost of the variation to the Price. Payment for all variations must be made in full at the time of their completion. At Argon’s sole discretion a non-refundable deposit may be required. Time for payment for the Goods being of the essence, the Price will be payable by the Client on the date/s determined by Argon, which may be: (a) on delivery of the Goods; (b) before delivery of the Goods; (c) by way of instalments/progress payments in accordance with Argon’s payment schedule; (d) for certain approved Clients, due twenty (20) days following the end of the month in which a statement is posted to the Client’s address or address for notices; (e) the date specified on any invoice or other form as being the date for payment; or (f) failing any notice to the contrary, the date which is seven (7) days following the date of any invoice given to the Client by Argon. Payment may be made by cash, cheque, bank cheque, electronic/on-line banking, credit card (a surcharge may apply per transaction), or by any other method as agreed to between the Client and Argon. Unless otherwise stated the Price does not include GST. In addition to the Price the Client must pay to Argon an amount equal to any GST Argon must pay for any supply by Argon under this or any other agreement for the sale of the Goods. The Client must pay GST, without deduction or set off of any other amounts, at the same time and on the same basis as the Client pays the Price. In addition the Client must pay any other taxes and duties that may be applicable in addition to the Price except where they are expressly included in the Price.

5.2

5.3 5.4

5.5 5.6

6. 6.1 6.2 6.3 6.4 7. 7.1 7.2 7.3 7.4 7.5 8. 8.1 8.2 8.3

9. 9.1 9.2

9.3 9.4 9.5 9.6 10. 10.1 10.2 10.3

Delivery of Goods Delivery (“Delivery”) of the Goods is taken to occur at the time that: (a) the Client or the Client’s nominated carrier takes possession of the Goods at Argon’s address; or (b) Argon (or Argon’s nominated carrier) delivers the Goods to the Client’s nominated address even if the Client is not present at the address. At Argon’s sole discretion the cost of delivery is either included in the Price or is in addition to the Price. The Client must take delivery by receipt or collection of the Goods whenever they are tendered for delivery. In the event that the Client is unable to take delivery of the Goods as arranged then Argon shall be entitled to charge a reasonable fee for redelivery and/or storage. Any time or date given by Argon to the Client is an estimate only. The Client must still accept delivery of the Goods even if late and Argon will not be liable for any loss or damage incurred by the Client as a result of the delivery being late. Risk Risk of damage to or loss of the Goods passes to the Client on Delivery and the Client must insure the Goods on or before Delivery. If any of the Goods are damaged or destroyed following delivery but prior to ownership passing to the Client, Argon is entitled to receive all insurance proceeds payable for the Goods. The production of these terms and conditions by Argon is sufficient evidence of Argon’s rights to receive the insurance proceeds without the need for any person dealing with Argon to make further enquiries. If the Client requests Argon to leave Goods outside Argon’s premises for collection or to deliver the Goods to an unattended location then such Goods shall be left at the Client’s sole risk. Argon shall be entitled to rely on the accuracy of any measurements, specifications and other information provided by the Client. The Client acknowledges and agrees that in the event that any of this information provided by the Client is inaccurate, Argon accepts no responsibility for any loss, damages, or costs however resulting from these inaccurate measurements, specifications or other information. Any advice, recommendation, information, assistance or service provided by Argon in relation to Goods or Services supplied is given in good faith, is based on Argon’s own knowledge and experience and shall be accepted without liability on the part of Argon, and it shall be the responsibility of the Client to confirm the accuracy and reliability of the same in light of the use to which the Client makes or intends to make of the Goods or Services. Title Argon and the Client agree that ownership of the Goods shall not pass until: (a) the Client has paid Argon all amounts owing to Argon; and (b) the Client has met all of its other obligations to Argon. Receipt by Argon of any form of payment other than cash shall not be deemed to be payment until that form of payment has been honoured, cleared or recognised. It is further agreed that until ownership of the Goods passes to the Client in accordance with clause 8.1: (a) the Client is only a bailee of the Goods and must return the Goods to Argon on request. (b) the Client holds the benefit of the Client’s insurance of the Goods on trust for Argon and must pay to Argon the proceeds of any insurance in the event of the Goods being lost, damaged or destroyed. (c) the Client must not sell, dispose, or otherwise part with possession of the Goods other than in the ordinary course of business and for market value. If the Client sells, disposes or parts with possession of the Goods then the Client must hold the proceeds of any such act on trust for Argon and must pay or deliver the proceeds to Argon on demand. (d) the Client should not convert or process the Goods or intermix them with other goods but if the Client does so then the Client holds the resulting product on trust for the benefit of Argon and must sell, dispose of or return the resulting product to Argon as it so directs. (e) the Client irrevocably authorises Argon to enter any premises where Argon believes the Goods are kept and recover possession of the Goods. (f) Argon may recover possession of any Goods in transit whether or not delivery has occurred. (g) the Client shall not charge or grant an encumbrance over the Goods nor grant nor otherwise give away any interest in the Goods while they remain the property of Argon. (h) Argon may commence proceedings to recover the Price of the Goods sold notwithstanding that ownership of the Goods has not passed to the Client. Personal Property Securities Act 1999 (“PPSA”) Upon assenting to these terms and conditions in writing the Client acknowledges and agrees that: (a) these terms and conditions constitute a security agreement for the purposes of the PPSA; and (b) a security interest is taken in all Goods and/or collateral (account) – being a monetary obligation of the Client to Argon for Services – that have previously been supplied and that will be supplied in the future by Argon to the Client. The Client undertakes to: (a) sign any further documents and/or provide any further information (such information to be complete, accurate and up-to-date in all respects) which Argon may reasonably require to register a financing statement or financing change statement on the Personal Property Securities Register; (b) indemnify, and upon demand reimburse, Argon for all expenses incurred in registering a financing statement or financing change statement on the Personal Property Securities Register or releasing any Goods charged thereby; (c) not register, or permit to be registered, a financing statement or a financing change statement in relation to the Goods and/or collateral (account) in favour of a third party without the prior written consent of Argon; and (d) immediately advise Argon of any material change in its business practices of selling the Goods which would result in a change in the nature of proceeds derived from such sales. Argon and the Client agree that nothing in sections 114(1)(a), 133 and 134 of the PPSA shall apply to these terms and conditions. The Client waives its rights as a debtor under sections 116, 120(2), 121, 125, 126, 127, 129, 131 and 132 of the PPSA. Unless otherwise agreed to in writing by Argon, the Client waives its right to receive a verification statement in accordance with section 148 of the PPSA. The Client shall unconditionally ratify any actions taken by Argon under clauses 9.1 to 9.5. Security and Charge In consideration of Argon agreeing to supply the Goods, the Client charges all of its rights, title and interest (whether joint or several) in any land, realty or other assets capable of being charged, owned by the Client either now or in the future, to secure the performance by the Client of its obligations under these terms and conditions (including, but not limited to, the payment of any money). The Client indemnifies Argon from and against all Argon’s costs and disbursements including legal costs of a solicitor and own client basis incurred in exercising Argon’s rights under this clause. The Client irrevocably appoints Argon and each director of Argon as the Client’s true and lawful attorney/s to perform all necessary acts to give effect to the provisions of this clause 10 including, but not limited to, signing any document on the Client’s behalf.

11. 11.1

Client’s Disclaimer The Client hereby disclaims any right to rescind, or cancel any contract with Argon or to sue for damages or to claim restitution arising out of any inadvertent misrepresentation made to the Client by Argon and the Client acknowledges that the Goods are bought relying solely upon the Client’s skill and judgment.

12. 12.1

Defects and Returns The Client shall inspect the Goods on delivery and shall within seven (7) days of delivery (time being of the essence) notify Argon of any alleged defect, shortage in quantity, damage or failure to comply with the description or quote. The Client shall afford Argon an opportunity to inspect the Goods within a reasonable time following delivery if the Client believes the Goods are defective in any way. If the Client shall fail to comply with these provisions the Goods shall

30285 © Copyright – EC Credit Control 1999 - 2016 Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit www.argondistributors.co.nz website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

Terms and Conditions Index

Argon Distributors – Terms & Conditions of Trade

12.2

12.3 12.4 13. 13.1 13.2

be presumed to be free from any defect or damage. For defective Goods, which Argon has agreed in writing that the Client is entitled to reject, Argon’s liability is limited to either (at Argon’s discretion) replacing the Goods or repairing the Goods. Goods will not be accepted for return other than in accordance with 12.1 above, and provided that: (a) Argon has agreed in writing to accept the return of the Goods; and (b) the Goods are returned at the Client’s cost within seven (7) days of the delivery date; and (c) Argon will not be liable for Goods which have not been stored or used in a proper manner; and (d) the Goods are returned in the condition in which they were delivered and with all packaging material, brochures and instruction material in as new condition as is reasonably possible in the circumstances. Argon may (in its discretion) accept the return of Goods for credit but this may incur a handling fee of fifteen percent (15%) of the value of the returned Goods plus any freight. Subject to clause 12.1, non-stocklist items or Goods made to the Client’s specifications are not acceptable for credit or return. Warranty Subject to the conditions of warranty set out in clause 13.2 Argon warrants that if any defect in any workmanship of Argon becomes apparent and is reported to Argon within twelve (12) months of the date of delivery (time being of the essence) then Argon will either (at Argon’s sole discretion) replace or remedy the workmanship. The following conditions are applicable to the warranty given by clause 13.1: (a) and, where applicable, shall be contained in warranty documentation supplied with the Goods; and (b) the warranty shall not cover any defect or damage which may be caused or partly caused by or arise through:

(i) failure on the part of the Client to properly maintain any Goods; or (ii) failure on the part of the Client to follow any instructions or guidelines provided by Argon; or (iii) any use of any Goods otherwise than for any application specified on a quote or order form; or (iv) the continued use of any Goods after any defect becomes apparent or would have become apparent to a reasonably prudent operator or user; or (v) fair wear and tear, any accident or act of God.

13.3 13.4

(c) the warranty shall cease and Argon shall thereafter in no circumstances be liable under the terms of the warranty if the workmanship is repaired, altered or overhauled without Argon’s consent. (d) in respect of all claims Argon shall not be liable to compensate the Client for any delay in either replacing or remedying the workmanship or in properly assessing the Client’s claim. For Goods not manufactured by Argon, the warranty shall be the current warranty provided by the manufacturer of the Goods. Argon shall not be bound by nor be responsible for any term, condition, representation or warranty other than that which is given by the manufacturer of the Goods. In the case of second hand Goods the Client acknowledges that he has had full opportunity to inspect the same and that he accepts the same with all faults and that no warranty is given by Argon as to the quality or suitability for any purpose and any implied warranty, statutory or otherwise, is expressly excluded. Argon shall not be responsible for any loss or damage to the Goods, or caused by the Goods, or any part thereof however arising.

14. 14.1

Consumer Guarantees Act 1993 If the Client is acquiring Goods for the purposes of a trade or business, the Client acknowledges that the provisions of the Consumer Guarantees Act 1993 do not apply to the supply of Goods by Argon to the Client.

15. 15.1

Default and Consequences of Default Interest on overdue invoices shall accrue daily from the date when payment becomes due, until the date of payment, at a rate of two and a half percent (2.5%) per calendar month (and at Argon’s sole discretion such interest shall compound monthly at such a rate) after as well as before any judgment. If the Client owes Argon any money the Client shall indemnify Argon from and against all costs and disbursements incurred by Argon in recovering the debt (including but not limited to internal administration fees, legal costs on a solicitor and own client basis, Argon’s collection agency costs, and bank dishonour fees). Further to any other rights or remedies Argon may have under this contract, if a Client has made payment to Argon by credit card, and the transaction is subsequently reversed, the Client shall be liable for the amount of the reversed transaction, in addition to any further costs incurred by Argon under this clause 15 where it can be proven that such reversal is found to be illegal, fraudulent or in contravention to the Client’s obligations under this agreement. Without prejudice to any other remedies Argon may have, if at any time the Client is in breach of any obligation (including those relating to payment) under these terms and conditions Argon may suspend or terminate the supply of Goods to the Client. Argon will not be liable to the Client for any loss or damage the Client suffers because Argon has exercised its rights under this clause. Without prejudice to Argon’s other remedies at law Argon shall be entitled to cancel all or any part of any order of the Client which remains unfulfilled and all amounts owing to Argon shall, whether or not due for payment, become immediately payable if: (a) any money payable to Argon becomes overdue, or in Argon’s opinion the Client will be unable to make a payment when it falls due; (b) the Client becomes insolvent, convenes a meeting with its creditors or proposes or enters into an arrangement with creditors, or makes an assignment for the benefit of its creditors; or (c) a receiver, manager, liquidator (provisional or otherwise) or similar person is appointed in respect of the Client or any asset of the Client.

15.2 15.3 15.4 15.5

16. 16.1 16.2 16.3

Cancellation Argon may cancel any contract to which these terms and conditions apply or cancel delivery of Goods at any time before the Goods are delivered by giving written notice to the Client. On giving such notice Argon shall repay to the Client any money paid by the Client for the Goods. Argon shall not be liable for any loss or damage whatsoever arising from such cancellation. In the event that the Client cancels delivery of Goods the Client shall be liable for any and all loss incurred (whether direct or indirect) by Argon as a direct result of the cancellation (including, but not limited to, any loss of profits). Cancellation of orders for Goods made to the Client’s specifications, or for non-stocklist items, will definitely not be accepted once production has commenced, or an order has been placed.

17. 17.1

Dispute Resolution All disputes and differences between the Client and Argon touching and concerning this agreement shall be referred to arbitration under a single arbitrator agreed upon by both parties, or failing agreement, by two arbitrators (one to be appointed by each party) and their umpire (appointed by them prior to arbitration), such arbitration to be carried out in accordance with provisions of the Arbitration Act 1996.

18. 18.1

Privacy Act 1993 The Client authorises Argon or Argon’s agent to: (a) access, collect, retain and use any information about the Client;

19. 19.1 19.2 19.3 19.4 19.5 19.6 19.7 19.8

(including any overdue fines balance information held by the Ministry of Justice) for the purpose of assessing the Client’s creditworthiness; or

for the purpose of marketing products and services to the Client. disclose information about the Client, whether collected by Argon from the Client directly or obtained by Argon from any other source, to any other credit provider or any credit reporting agency for the purposes of providing or obtaining a credit reference, debt collection or notifying a default by the Client. Where the Client is an individual the authorities under clause 18.1 are authorities or consents for the purposes of the Privacy Act 1993. The Client shall have the right to request Argon for a copy of the information about the Client retained by Argon and the right to request Argon to correct any incorrect information about the Client held by Argon. (b)

18.2 18.3

(i) (ii)

General The failure by Argon to enforce any provision of these terms and conditions shall not be treated as a waiver of that provision, nor shall it affect Argon’s right to subsequently enforce that provision. If any provision of these terms and conditions shall be invalid, void, illegal or unenforceable the validity, existence, legality and enforceability of the remaining provisions shall not be affected, prejudiced or impaired. These terms and conditions and any contract to which they apply shall be governed by the laws of New Zealand and are subject to the jurisdiction of the Auckland courts of New Zealand. Argon shall be under no liability whatsoever to the Client for any indirect and/or consequential loss and/or expense (including loss of profit) suffered by the Client arising out of a breach by Argon of these terms and conditions (alternatively Argon’s liability shall be limited to damages which under no circumstances shall exceed the Price of the Goods). The Client shall not be entitled to set off against, or deduct from the Price, any sums owed or claimed to be owed to the Client by Argon nor to withhold payment of any invoice because part of that invoice is in dispute. Argon may license or sub-contract all or any part of its rights and obligations without the Client’s consent. The Client agrees that Argon may amend these terms and conditions at any time. If Argon makes a change to these terms and conditions, then that change will take effect from the date on which Argon notifies the Client of such change. The Client will be taken to have accepted such changes if the Client makes a further request for Argon to provide Goods to the Client. Neither party shall be liable for any default due to any act of God, war, terrorism, strike, lock-out, industrial action, fire, flood, storm or other event beyond the reasonable control of either party. The Client warrants that it has the power to enter into this agreement and has obtained all necessary authorisations to allow it to do so, it is not insolvent and that this agreement creates binding and valid legal obligations on it.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

Index

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Contact Details Showroom: Argon Distributors 7 Monier Place, Mt. Wellington, Auckland 1060 New Zealand

Website: www.argondistributors.co.nz

Phone: 09 634 3415 (International +64 9 634 3415)

Returns and Inwards goods: 7 Monier Place, Mt. Wellington, Auckland 1060 New Zealand

Freephone: 0508 634 341 (within New Zealand) Fax: 09 634 7417 (International +64 9 634 7417)

Orders and enquiries: sales@argondistributors.co.nz Accounts: accounts@argondistributors.co.nz

PRODUCT CATALOGUE

Index

ELECTRIC MOTORS

MOTOR SPEED CONTROL

FANS & BLOWERS

153

POOL & SPA EQUIPMENT

177

SURFACE PUMPS

265

PENTAIR PUMPS

307

SUBMERSIBLE PUMPS

333

BORE PUMPS

355

WATER FILTRATION

361

VALVES AND FITTINGS

395

PUMP CONTROL

425

PUMP & MOTOR PARTS

PRODUCT CATALOGUE

Index

ELECTRIC MOTORS C Frame Shaded Pole

Short Shaft Motors

Double Shaft Motors

Fan Motor Mounting Accessories

Bricksaw Motor

Betts Electric Motors

CMG SLA/HLA Series

CMG MTC Series

9 Series General Purpose

Compressor Motor

Single Shaft Reslient Mount

Pump Replacement Motors

Commercial Dryer Motor

Single Shaft Body and Rear Mount Motors

Long Shaft Motors

Hub Drive Motors

CMG HGA Series

VARIABLE SPEED DRIVES

Compact series VFD Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

AC 10 Series - IP20 3

Ziehl Speed Controllers

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

Index

FANS & BLOWERS Hascon custom impellers

Aluminium Fan Blades

Hot Air Circulation Fans

EBM DC Compact Axials

126

102

Inline Axial Fans

150

151

Roof Supply/Extract Fan

Belt Drive Blowers

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Air Blowers

EBM Centrifugal Modules

148

AC Type Blower Units

Square Plate Axials Fans

140

137

Backward Curved Fans

EBM Compact Axials

115

Basket Grill Axial Fans

130

146

EBM Papst Axial Fans

Compact Fan Accessories

Inline Fans

Mosswyn Compact Axials

Blower wheels

Mosswyn DC Compact Axials

Multiwing Fan Blades

DCI Series Case Fans

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

Index

156

157

POOL & SPA EQUIPMENT APR Series

158

160

159

PPP Series

162

Portapac Series

LTPS Series

168

172

170

SPA Blowers &Heaters

Pool Cleaners

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Chlorine In-Line Feeders 5

Pool Cleaning Accessories

174

173

Salt Chlorinators

SMA20 Single Speed

171

LEISURETIME II Sand Filter

173

200 Series

167

SMA Series

169

Two Speed SPA Pumps

163

166

SPA Series

SPA Circulators

Max-E-Pro Series

933 Series

166 1

1 165

161

Enviromax Series

Silentflo Series

162

LTP Series

White goods

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

Index

181

180

SURFACE PUMPS Hydropak Silent Booster

182

184

DJS Series

190

186

JET Series

220

1 203

Ultra Series

2231

223

225

K Series

226 139

230

KP Series

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

ODS Series

KA Series

228

KD Series

MVI Series

OD Series

224 1

227

1 206

222

PL Series

PM Series

JAP Series

DMI Series

222

MVI Series motors

188

JB Series

192

DHM Series

Jexi Junior Series

231

KL Series 6

KC Series

BK Series

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

Index

233

232

M Series Classic

K Series Classic

236

234

SPK Series

242

CN Series

246

244

BSN Series

253

252

258

CRT Series

259

Albajet Series

CKD Series

261

Jimmy 90 Booster

SPO80 Series

CRD Series

256

260

245

249

CDP Series

CDX Series

SPM Series

ING Series

248

SPR Series

235

263

262

CKRS Inline Circulator

CLP Series

EEM Series

Gear Pumps

264

MDP Series Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

Index

268

269

270

ONGA PUMPS JS Series

271

SMH Series

272

Intellimaster

276

273

Waterswitch

281

280

Aquapack Steel Pressure Tanks

281

283

SeaBass Series

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

JJ Series

Aquapack Stainless

282

OHPV range

274

500 Series

280

OJ Series

Multi Evo

284

400 Series 8

Prosource range

14 Series

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

284

Index

284

112 Series

287

12 & 15 Series

290

288

MiniBlaze

295

292

Blazemaster Yanmar Engine

297

VF150 Submersible Dominator Submersible

Franklin Submersible Motors

5000 Series

298

300

CSM Vortex Submersible

301

SLV Series 2088 Series

305

304

8000 Series

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Simer 5 utility Compac 200 Series

CSM Cutter Submersible

303

302

Signature 2000 Borehole Pumps

Drenox Series

300

WC FIX and Flood box

LCT65VR

293

OJ Engine Driven

296

299

289

GP960 Engine Drive

292

Blazemaster (Briggs & Stratton) Blazemaster (Honda)

SSS Series

252 Series

288

Southern Cross ISO

286

285

9000 Solar Series 9

Accessories and Spare Parts

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

Index

310

311

SUBMERSIBLE PUMPS NSP Pond Pump

312

313

LB/VXP Series

316

314

PICCOLO 160 Series

320

318

JAVA Series

324

323

326

DMS Series

327

330

MAJESTO Series

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

DCX Series

DEMAX Series

329

UVI Industrial Series

SSX Series

DSX Series

325

328

319

309 322

LB Series

BULLET Series

SMART SAM Series

TINY SUB Series

321

REALE Series

315

ELITE Series

317

ROVER Series

D-SUB Series

331

LBC Series 10

ULTRAVORT Series

FGP Series

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

Index

334

336

BORE PUMPS S3P 3” Series

350

351

DR 4” Submersible Motors

304

DRS Series

352

DCB Control Boxes

Bore Pump Accessories

1 356

WATER FILTRATION Slimline 10” Filters

1 357

356

359

BIG BLUE 10” & 20” Filters

Inline Filters

Under Bench and UV Filters

364

365

VALVES & FITTINGS Butterfly Handle Ball Valves -Brass

366

PVC Ball Valves

367

Long Handle Ball Valve - Stainless Steel

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

367

Gate Valves 11

Long Handle Ball Valves -Brass

Butterfly Valves

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

368

Index

370

Spring Check Valves

372

371

Ball Check Valves

Swing Check Valves

373

Inline Strainers

376

374

Foot Valve Strainers

Pressure Relief Valves

391

386

390

393

Cam Lock Adapters

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Layflat Blue Std Duty Hose Kit

394

Pump Stands 12

Coelbo Tees

391

Extendable Flexible Hoses

392

PVC Suction Hose

Union Couplers

Stainless Fittings

Flexible Hoses

Manifolds & Flanges

377

382

389

387

Flexible Couplers

Flow Meters

Plastic Connectors

Brass Fittings

375

376

381

378

Foot Valves

Alderdice Bronze Valves

376

Pressure Reducer Valves

372

Thread Seal Compound Pump Covers

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

Index

397

PUMP CONTROL Pressure Gauges

398

401

Float Switches

402

401

Safematic

Paddle Flow Switches

405

Pressure tanks - Galvanized

415

Alarm Box

Switchgenie Pump Control

419

Pump Auto Controllers

414

Variable Speed Controllers

417

Level Probes And Controllers

420

421

Pressure Tanks – Stainless Steel

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Hi Temperature Cut Out Switch

409

406

Switchgenie Electronic Pressure Switch

Pressure Switches

412

401

Pressure Tanks - Steel

422

Pressure Tanks – Fibre Glass

Cycle Stop Valves

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PRODUCT CATALOGUE

Index

427

428

PUMP & MOTOR PARTS Cooling fans

429

Motor Switch Plates

433

430

Centrifugal Switches

437

Taper Bush V-Grooved Pulley

Ball Bearings

442

445

Run Capacitors - Spade Terminal

440

439

Run Capacitors - Can

Seals - Type 16

436

Capacitor Accessories

438

441

Motor Overloads

435

Start Capacitors

Run Capacitors - Lead

431

Capacitor Boxes

434

Schurter Motor Overloads

Motor Fan Cowls

443

Seals - Type 68

444

Seals - Type 55

446

447

Seals - Type 21

SEAlS Argon Replacement Seal Selection

293

452

EnginEERing 298

Conversion Factors

ARgOn DiSTRiBUTORS REPlACEMEnT SEAl SElECTiOn ChART Model

Part no

Alfa laval (finsbury / Calpeda) CA NM American Products Ultraflo Aquaflo XP-2, Circmaster DAB DP100,151, Jet 61,81,82M Jet100,151,251 Jet 200,300, Jetinox 90,110, K12/200,K14/400 K20/41, K20/1200 K18/500,K28/500, K30/70,K30/100,K35/40, K36/100 K36/200,K40/200 K45/50,K55/50 K55/100,K66/100,K90/100 KH25/80,KH30/90 KH35/100,KH40/100 KP30/16-6 Nova 41, Davey 62501 to 62701-3 62701-4 Aqua-mate 350,450 CD40-40,55,75 Celsior Bath Pumps, HP Series CR Series (Power Chief) Engine Drive 93104-93116 Engine Drive 93117 Engine Drive 93124 Engine Drive 93126 Engine Drive 93134,93164 Engine Drive 93206 - 93234 Engine Drive 93254E Engine Drive 93264, 9385D Engine Drive 93860 Engine Drive 93870 Dynaflo101-3,103-1, Dynaflo 51001,51301,51451S Dynaflo 60061R2, 62001-3 Dynaflo 62101S-0,62201-0 - 62303-3 Dynajet Dynaprime 54101, 7410 Dynaprime 64101,2 HM Series HP Series HS Series, Silensor Pool Pumps M Series M 1603 Series Mukmova Pool Pump 100 to 300. Pool Pump 300. Power Ace 100,150,200 ( -0) Power Ace 100,150,200 ( -1,-2) Power Chief 85,105,135 Power Master Prime Jet 90-150 Prime Jet 200-240 Shallow/Deep Well 095S1,125S1,165S3/D3 etc Solar Prime Series Thermajet Spa Pumps XA85,105,135, XB Series 201,301/ -1,-2 XB Series 73101,to 401 XB Series 75101 XD, XF, XP Series,

100M/16 61M/16 61M/16 200M/6 61M/16 100M/16 61M/16 36/200T 100M/16 100M/16 36/200T 100M/16 36/200T 200M/6 100M/16 41M/16 41M/16

47863 49021 48802SP 48913 48802SP 49021 48801SP 40101 48801SP 40101 48801SP 40101 48801SP 40101 48801SP 40101 47863 30736 47863 47863 30736 47863 400558 48802SP 49771 4009395 4060298 48800SP 47863 49021

Seal Data

Argon Replacement Part no list Price

Size

Type

3/4 32mm

T68 R3

410-88236 410-86732

$49.05 $129.00

5/8

T68

410-88226

$25.18

5/8

T16

410-88214

$18.23

15mm 13mm 13mm 17mm 13mm 15mm 13mm 25mm 22mm 15mm 15mm 22mm 15mm 22mm 17mm 15mm 12mm 12mm

R3 T55 T55 R3 T55 R3 T55 R3 R3 R3 R3 R3 R3 R3 R3 R3 T55 T55

410-86715 410-84753 410-84753 410-86717 410-84753 410-86715 410-84753 410-86725A 410-86722 410-86715 410-86715 410-86722 410-86715 410-86722 410-86717 410-86715 410-84752 410-84752

$29.68 $25.60 $25.60 $34.55 $25.60 $29.68 $25.60 $70.97 $61.43 $29.68 $29.68 $61.43 $29.68 $61.43 $34.55 $29.68 $19.35 $19.35

5/8 16mm 1/2 22mm 1/2 16mm 5/8 3/4 5/8 3/4 5/8 3/4 5/8 3/4 5/8 3/4 5/8 1/2 5/8 5/8 1/2 1/2 5/8 1/2 5/8

T68 T21 SIC T16 R3 T16 T21 SIC T16 T16 T16 T16 T16 T16 T16 T16 T16 T16 T68 T68 T68 T68 T68 T68 T68 T16 T16

1” 5/8 16mm

T16 T68 T21 SIC

49021 48802SP 49021 48801SP 48800SP 47863

16mm 1/2 16mm 5/8 1” 5/8

T21 SIC T16 T21 SIC T16 T16 T68

30736 48802SP 49021 48802SP 49021 48802SP

1/2 1/2 16mm 1/2 16mm 1/2

T68 T16 T21 SIC T16 T21 SIC T16

410-88226* 410-88211* 410-86722A 410-88211* 410-88214* 410-88215* 410-88214* 410-88215* 410-88214* 410-88215* 410-88214* 410-88215* 410-88214* 410-88215* 410-88226* 410-88210C 410-88226* 410-88226* 410-88210* 410-88210C 410-88226*

$15.53 $35.09 $15.53 $16.96 $15.53 $16.96 $15.53 $16.96 $15.53 $16.96 $15.53 $16.96 $25.18

Mechanical Seal Type 89

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

$15.53

$39.56 $25.18 $35.09

410-88211*

410-88211* 410-88211*

$15.53 $15.53 $35.09 $15.53 $35.09 $15.53

Percentage of Rated Capacity 80% 70% 57% 40% 25% 17%

Litres 15 per min. 15 per min. @ 140 kPa 35 - 60 per day 70 - 100 per day 50 - 60 per day 4 - 9 per day 9 per day 23 per day 45 per min. @ 140 kPa 75 per min. @ 140 kPa

Minimum Operating Pressure This is the pressure at which the pump duties are given. Should the pressure drop below the minimum operating pressure, deep well injector pumps could lose prime. Minimal operating pressure should always be set for maximum expected drawdown.

$35.09 $15.53 $35.09 $15.53 $39.56 $25.18

Seal Selection Chart 14

Application Shower Lawn Sprinkler Cattle Milking Cows Horses Sheep Pigs 100 Chickens 1/2” Tap 3/4” Tap

$25.18

410-88211*

Total Suction Head (Metres) 3.0 4.6 6.1 7.6 8.5 8.8

Water Requirements

$25.18 $25.18 $15.53

410-88230 * 410-88226*

Gall per Minute 1 0.01667 13.2 0.22 0.833 3.666 220 6.23

Galls Litres Litres US Galls Cubic Cubic Cubic per per per per Metre per Metre per Feet per Hour Second Minute Minute Hour Minute Minute 60 0.076 4.546 1.2 0.2728 0.00455 0.1605 1 0.00127 0.07578 0.02 0.004547 0.00268 792 1 60 15.84 3.6 0.06 2.119 13.2 0.0167 1 0.264 0.06 0.001 0.0353 50 0.063 3.787 1 0.227 0.0038 0.1337 220 0.278 16.667 4.400 1 0.0167 0.5886 13200 16.68 1000 264.0 60 1 35.31 373.8 0.472 28.32 7.48 1.699 0.0283 1

Square Measure:

Length Equivalents: 1 league 1 mile 1 furlong

= = =

Volume Imp US Galls Litres Galls 1 4.546 1.2 0.22 1 0.264 0.833 3.785 1 6.23 28,317 7.48 0.1 0.4546 0.12 220 1000 264 271,378 325,828

3 miles 8 furlongs 40 poles

1 chain

= =

100 links

1 fathom

6 feet

(Feet) 10 15 20 25 28 29

Use 410-80020

410-88214* 410-88230 * 410-88226* 410-88210C 410-88210* 410-88211*

Flow

Reduction of capacity with centrifugal pump suction

$25.18 $35.09 $15.53

Free Phone 0508 634 341. Fax 09 634 7417. Email sales@argondistributors.co.nz Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE.

Seals - Type R3

Pressure & Liquid Head Foot Kilogram Metre Millimetre of per Square Atmosphere of of Inch of psi Water kPa cm or Bar Water Mercury Mercury 1 2.31 6.895 0.0703 0.68 0.704 51.87 2.042 0.433 1 2.986 0.0305 0.03 0.305 22.45 0.884 0.145 0.335 1 0.0102 0.01 0.102 7.52 0.296 14.223 32.85 98.09 1 0.98 10 737.9 29.05 14.5 33.50 100 1.02 1 10.21 752.1 29.61 1.42 3.281 9.797 0.1 0.098 1 73.66 2.900 0.019 0.044 0.131 0.0014 0.0013 0.014 1 0.039 0.491 1.134 3.377 0.034 0.0339 0.345 25.4 1 1mm Hg is known by the name “tor”. (1 kPa = 1kN/m2). The international standard atmosphere (1 atm) = 101 325 pascals or 1.013 235 bar. This is equal to 1.033 23 kgf/cm2 or 14.6959 lbf/in2. In meteorology 1 millibar = 100 pascals (1 mb = 100Pa).

1 Sq mile 1 Sq km 1 Acre

lbs Cubic Acre Cubic Water Metre Feet Inch 10 0.00455 277.34 2.2 0.00100 61.02 8.333 0.00379 231.06 62.3 0.02832 1728 1 0.00046 27.820 2200 1 0.00081 61.032 2,713,788 1234 1 -

Fluid Equivalents: 1 gallon

2 pints 4 gills

lbs oz gms Kg Ton Tonne cwt Stone 1 16 453.6 0.4536 0.0004464 0.0004535 0.008929 0.07143 0.0625 1 28.35 0.02836 0.0022 0.03527 1 0.001 2.205 35.274 1000 1 0.000984 0.001 2240 35,840 1,016,064 1,016 1 1.016 20 160 2204.6 35,274 1,000,000 1000 0.9842 1 19.684 157.47 112 1792 50,803 50.8 0.05 0.0508 18 14 224 6350 6.35 0.00625 0.0064 .125 1

1 gill

5 ozs

Aq. foot x 1 inch

Surface area sphere Volume of cylinder Volume of sphere

1 HP

746 watts

33,000 ft. Ibs per min 550 ft. Ibs per sec.

Heat and Energy: 1 kW/hour

3.6 Meg Joule

3412 BTU/hour

Free Phone 0508 634 341. Fax 09 634 7417. Email sales@argondistributors.co.nz Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE.

Engineering - Conversion Factors

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

πD

πD2÷4 πD2

πD2H÷4

1/6πD3

H =

height

π = 3.142

I =

Impeller

Pressure varies as RPM2 or I2 Power varies as RPM3 or I3 Volume varies as RPM

= = =

D = diameter

Pump Affinity Laws: (F -32) x 5/9 (C x 9/5) + 32

10,000 sq. metres 2.471 acres

Circle Formulas: Area of circle

1 litre 0.52 gall

= =

Power:

640 acres, 259 hectare 247 acres, 100 hectare 4,840 sq. yards 43,560 sq. feet 4 roods 0.4047 hectare 40 perches, rod, pole 30.25 sq. yards

107,640 sq. feet 10.764 sq feet

Water boils at 100˚C, or 212˚F Water freezes at 0˚C, or 32˚F

Length Inch Foot Yard cms Metre Mile Km Chain 1 0.0833 0.02778 2.54 0.0254 12 1 0.3333 30.48 0.3048 0.000189 0.0003048 0.01515 36 3 1 91.44 0.9144 0.0005681 0.0009144 0.04545 0.3936 0.0328 0.010931 1 0.01 39.37 3.2808 1.0936 100 1 0.00052 0.001 0.0497 63,360 5,280 1760 160,934 1609.4 1 1.6093 80 39,371 3280.9 1093.6 100,000 1000 0.6214 1 49.71 792 66 22 2011.68 20.116 0.0125 0.0201 1

= =

Temperature:

= = = = =

Circumference of circle

Water Catchment Volume:

Centrigrade Fahrenheit

= =

= = 1 Rood 1 Hectare

1 Sq feet

4 quarts 10 Ibs (water)

= =

Sq. metre x 1mm

Weight

= =

1 quart 1 pint

= =

4 poles 66 feet

1 Perch

Cubic Feet 0.1605 0.0353 0.1337 1 0.0161 35.32 43,560

ELECTRIC MOTORS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Index

What’s Popular!

Mosswyn Hub Drive Motors

Betts Electric Motors

EBM EC Motors

GREEN TECH

✓

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Index

ELECTRIC MOTORS C Frame Shaded Pole

Short Shaft Motors

Double Shaft Motors

Fan Motor Mounting Accessories

Commercial Dryer Motor

CMG MTC Series

Pump Replacement Motors

Bricksaw Motor

Single Shaft Reslient Mount

Single Shaft Body and Rear Mount Motors

Long Shaft Motors

Hub Drive Motors

9 Series General Purpose

Compressor Motor

Betts Electric Motors

CMG SLA/HLA Series

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

CMG HGA Series

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

C Frame Shaded Pole

C FRAME FASCO 1.5W Part No.

Watts

Volts

Amps

Rotation

Code

List Price

1.5

230

0.14

$69.00

133-J03RF03

15.5

63.5 9.5 NOM.

47.6

13.5

1.8 BOTH SIDES

19.1

6.5 BOTH SIDES

66.0

77.9

THREAD 5/32"BSW

9.4 3

3.175 3.170 S/STEEL 420 Ø

ROTATION 6.3MM TAB

LEADS BLUE COIL RESISTANCE - 300 OHMS

C FRAME FASCO 4.5W Part No.

Watts

Volts

Amps

Rotation

Code

List Price

4.5

230

0.3

ACW

$69.00

133-J04RF01 15

46 12.7 NOM.

63.5

7.7

THREAD 5/32"BSW

6.3

47.6

20 STRIPPED

79.4

4.80 4.70 MILD STEEL Ø

66.0

Ø 6.0

19.1

19.5

ROTATION

BLUE AND BROWN LEADS

11.8

18.2

470 BOOTLACE (MAX.) Ø 1.5 X 8 LONG

SUPPLIED LOOSE:2-OFF NUT 5/32 B.S.W. HX 5/16AF LOCK ZP 2-OFF WASHER TOOTH INT 4 DIA. ZP

COIL RESISTANCE - 120 OHMS

C FRAME FASCO 6.5W Part No.

Watts

Volts

Amps

Rotation

Code

List Price

133-J05RF11

6.5

230

0.27

ACW

$89.00

*133-JOSRF10

6.5

230

0.27

ACW

$102.00

44.6 8.3 8.3

16.1 NOM.

63.5 47.6

79.3

Ø 6.0

4.76 4.74 MILD STEEL Ø

66.0

19.1

THREAD 5/32" BSW

ROTATION 45 STRIPPED 10 BARE

BLUE AND BROWN LEADS 13.6

220 EYE TERMINAL 5MM

EARTH LEAD GREEN/YELLOW 200 LONG

*Also available as JOSRF10 with bracket

COIL RESISTANCE - 99 OHMS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

C Frame Shaded Pole

C FRAME FASCO 6W Part No.

Watts

Volts

Amps

Rotation

Code

List Price

133-J06BM19T

230

0.3

ACW

$92.00

19.1 NOM.

49.9 63.5

7.7 11.9

47.6 27

66.0

4.05 FLAT 3.95 MILD STEEL

Ø 6.0

BOOTLACE (MAX.) Ø 1.5 X 8 LONG

19.1

THREAD 5/32" BSW

12 FLAT

4.76 4.72

79.7

ROTATION

20 STRIPPED 18

18.2

470 BLUE AND BROWN LEADS

SUPPLIED LOOSE:2-OFF NUT 5/32 B.S.W. HX 5/16AF LOCK ZP 2-OFF WASHER TOOTH INT 4 DIA. ZP

COIL RESISTANCE - 77 OHMS

C FRAME FASCO 10.6W Part No.

Watts

Volts

Amps

Rotation

Code

List Price

133-J09E8WF/S

10.6

230

0.3

ACW

$102.00

Rotation

Code

List Price

69.5

28.6 NOM.

63.5 18

47.6

7.7

19.1

THREAD 5/32" BSW

Ø 6.0 MILD STEEL

ROTATION

5.95 5.91

5.87 5.83

66.0

79.4

13.4

20 STRIPPED

6 BARE

BLUE AND BROWN LEADS 860

COIL RESISTANCE - 61 OHMS

C FRAME FASCO 12W Part No.

Watts

Volts

Amps

133-J09OR05S

230

0.45

ACW

$109.00

*133-J09RFO5J

230

0.45

ACW

$109.00

28.6 NOM.

63.5

55.5 11

15.8

47.6

THREAD 5/32" BSW

78.6

5/32" BSW R.H. THREAD 3.98 3.90 MILD STEEL

66.0

Ø 6.0

19.1

8.3

ROTATION

Ø 9 PVC SLEEVE

6.3MM RECEPTACE 750 905

1-OFF BLACK (ACTIVE) 1-OFF BLACK (NEUTRAL/COMMON) 1-OFF GREEN/YELLOW (EARTH) LEADS COIL RESISTANCE - 48 OHMS

SUPPLIED LOOSE:2-OFF NUT 5/32 B.S.W. HX 5/16AF LOCK ZP 2-OFF WASHER TOOTH INT 4 DIA. ZP 1-OFF WASHER FLAT 4 ID. X 14.2 OD. X 1.2 ZP

* Short Shaft model. Shaft length is 43mm for 133-JO9RFO5J Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

C Frame Shaded Pole

C FRAME FASCO 10W Part No.

Watts

Volts

Amps

Rotation

Code

List Price

230

0.43

ACW

$120.00

133-J12BM07

63.5

48 15

47.6

Ø 8.6

5.5 FLAT 5.3 MILD STEEL THREAD 5/32" BSW

5.990 5.986

77.8

25 FLAT

19.1

38.1 NOM.

66.0

ROTATION

1-OFF BLACK (ACTIVE) 1-OFF BLACK (NEUTRAL/COMMON) 1-OFF GREEN/YELLOW (EARTH)

BLACK GREEN/YELLOW Ø 9 X 100 LONG SLEEVE 190

BLACK

TERMINALS UTILUX M1190 HOUSING UTILUX M3191-3R1 COIL RESISTANCE – 49 OHMS

C FRAME FASCO 14W

20.8

Watts

Volts

Amps

Rotation

Code

List Price

415

0.28

$135.00

38.1 NOM.

46.6

63.5 47.6

Ø 6.0 MILD STEEL

66.0

5.94 5.84 MEDIUM KNURL

8MM HEX. SPACER THREAD 5/32" BSW X 8 DEEP

415v

19.1

77.9

Part No.

133-J12CG02

ROTATION

6 BARE BROWN LEADS

900 COIL RESISTANCE - 105 OHMS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Square Hub Drive Motors

MOSSWYN SQUARE HUB DRIVE MOTOR Part no.

Watt

Amps

Qty per carton

Code

List price

133-SQ505

0.2

$34.00

133-SQ510

0.3

$46.00

133-SQ516

0.43

$56.00

133-SQ525

0.65

$68.00

133-SQ534

0.75

$81.00

Dimensions Model No.

SQ505

80v

SQ510

SQ516

SQ525

110

SQ534

118

A A

3 Holes on 372Holes PCDon M4 72 PCD M4

C C

B B

500 500

51 51

Ø25.4 Ø25.4

M4 M4

Rotation - ACW Rotation - ACW Ø84 Ø84

M4 M4

26 26

DD EE

FASCO SQUARE HUB DRIVE MOTOR Part no.

Watt

Amps

Qty per carton

Code

List price

133-55D505-80AT

0.2

$52.00

133-55D510-80AT

0.3

$57.00

133-55D516-80AT

0.43

$75.00

133-55D525-80AT

0.65

$108.00

133-55D534-80AT

0.75

$125.00

Dimensions A

55D505-80AT

55D510-80AT

55D516-80AT

55D525-80AT

105

55D534-80AT

126

24°

12° 1-HOLE M4 EARTH MOUNTING

24° 4-HOLES M4 12°ON Ø 54 P.C.D.

3-HOLES M4 ON Ø 71.4 P.C.D. EQUISPACED

4-HOLES M4 ON Ø 58 P.C.D.

10 BARE

3-HOLES M4 ON Ø 71.4 P.C.D. EQUISPACED

Ø 2 5 .4 Ø 3 .4

24°

12°

3-BLIND HOLES ON Ø 71.4 P.C.D. EQUISPACED

Ø 3 .4

24°

8-BLIND 12° HOLES ON Ø 54 P.C.D. 8-BLIND HOLES ON Ø 54 P.C.D.

Ø 2 5 .4 3

4-BLIND HOLES ON ØM4 54 P.C.D. 4-HOLES ON Ø 58 P.C.D.

10 BARE

FASCO

4-BLIND4-HOLES HOLES M4 ON Ø 54 ONP.C.D. Ø 54 P.C.D.

60 STRIPPED 60 STRIPPED

FASCO

Rotation - ACW 67

3-BLIND HOLES ON Ø 71.4 P.C.D. EQUISPACED

FASCO

1-HOLE M4 EARTH MOUNTING

Rotation - ACW

4-BLIND HOLES ON Ø 58 P.C.D. FASCO

Model No.

4-BLIND HOLES ON Ø 58 P.C.D.

LEAD 1500 LONG

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Square Hub Drive Motors

ELCO ECM MOTORS Part no.

Watts

Amps

RPM

133-ECM-C20252

17/25w

0.18

1400

133-ECM-HC20252

17/25w

0.17

1400/900

Rotation

Code

List price

$189.00

Reversible

$260.00

ELCO ECM motors are IP65 rated for long service life in tough environments. They are a hub drive multimount motor for a wide range of installations and come with a 0.9m removable plug lead. n

-30 to +60 degrees.

Electronic motor protection.

Up to 80% energy savings with EC technology.

230v 50/60Hz.

154 to 300mm blades.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Square Hub Drive Motors

EBM SQUARE HUB DRIVE MOTOR Part no.

Watt

Amps

Qty per carton

Code

List price

133-M4Q045-BD01

0.19

$68.00

133-M4Q045-CA01

0.2

$76.00

133-M4Q045-CA03

0.25

$81.00

133-M4Q045-CF01

0.42

$90.00

133-m4Q045-DA05

0.62

$98.00

133-M4Q045-EA01

0.62

$110.00

133-M4Q045-EF01

34/110

0.75

$140.00

Dimensions Model No.

133-M4Q045-BD01

133-M4Q045-CA01

133-M4Q045-CA03

133-M4Q045-CF01

133-M4Q045-EA01

103

133-M4Q045-EF01

125

Aluminium Fan Blades pg 81

EBM EC SQUARE HUB DRIVE MOTOR Part no.

Watt

Replacement for

Qty per carton

Code

List price

133-IQ3612-00

5, 7, 10, 16W

$138.00

133-IQ3620-01

16, 18, 23, 25W/34W

$191.00

Automatically adjusts speed to suit blade size.

GREEN TECH

✓

direction of rotation: ccw

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Round Hub Drive Motors

FASCO HUB DRIVE MOTOR Model No.

Watts

Amps

Shaft

Type

Dimensions A B

Code

List Price

133-50D520-87A

0.2

Hub

Mounting A+B opposite drive end

$122.00

133-50D552-01A

0.3

Hub

Mounting B opposite drive end

$163.00

133-50D551-02A

0.4

Hub

Mounting B opposite drive end

$210.00

133-50D503-89A

0.7

Hub

Mounting B opposite drive end

$215.00

Ø 102

Ø 60

FAN HUB

MOUNTING NUT 1/4" B.S.W. THREAD

RATING

LABEL

2.3

FAN MOUNTING DISC

1.5 Ø 22.2 4-HOLES 3/16"B.S.W. EQUISPACED 54.0 PCD

2.3

3-HOLES 3/16"B.S.W. EQUISPACED 71.4 PCD

Ø 22.2

1.8

LEAD LENGTH 750 LONG

BROWN, BLUE AND GREEN/YELLOW LEADS

45 STRIPPED

Ø 25.4

4-HOLES Ø 4.5 6.3MM RECEPTACLE

4-DIMPLES Ø 3.81

4-DIMPLES Ø 4.2 X 1.3 LONG

FAN HUB DETAIL ATTACHED TO LEAD IN PLASTIC :-BAG 4-OFF SCREW 3/16 BSW 8MM POSI DRIVE 4-OFF WASHER SHAKEPROOF EXT 5MM ID

FAN DISC DETAIL

FASCO HUB DRIVE MOTOR 9W Model No.

133-D564

Watts

Amps

Shaft

Mounting

0.3

Hub

Rear mounting B + Base mount

Dimensions A B

Code

List Price

$67.00

Code

List Price

$151.00

Code

List Price

$197.00

Replaces FA33HWK3543/AA2M6040K. Box size 12 units. n 86mm diameter. n

FASCO HUB DRIVE MOTOR 20W Model No.

Watts

Amps

Shaft

Capacitor

Rotation

Dimensions A B

133-6754ETS-A11

0.17

Hub

1MFD

Reversible

n Reversable.

FASCO HUB DRIVE MOTOR 415V Model No.

133-50D509-11A

Watts

Amps

Shaft

Mounting

0.4

Hub

Mounting B

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Dimensions A B

415v

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Short Shaft Motors

FASCO DOUBLE SHAFT MOTOR Model No.

Watts

Amps

Shaft

Type

133-50D501-80AT

0.3

5/16

Double Shaft

$159.00

133-50D502-80AT

0.5

5/16

Double Shaft

$175.00

133-50D503-80AT

0.78

5/16

Double Shaft

$178.00

133-50D505-80AT

1.0

5/16

Double Shaft

$181.00

Dimensions A B

Code

List Price

Snap off shaft type. Ø 102

70 A

Ø 60

1.5 BOTH ENDS 7.924 7.912 BOTH ENDS Ø

32 BOTH ENDS

17.5 FLAT BOTH ENDS

RATING

LABEL

6.83 FLAT 6.63 BOTH ENDS CUT OFF GROOVE BOTH ENDS (FOR CHANGING ROTATION) 4-HOLES 3/16"B.S.W EQUISPACED 54.0 PCD BOTH ENDS 45 STRIPPED

3-HOLES 3/16"B.S.W. EQUISPACED 71.4 PCD BOTH ENDS

BROWN, BLUE AND GREEN/YELLOW LEADS BOOTLACE Ø 1.85 X 10 LONG

ATTACHED TO LEAD IN PLASTIC BAG:4-OFF SCREW 3/16 BSW 8MM POSI DRIVE 4-OFF WASHER SHAKEPROOF EXT 5MM ID

LEAD LENGTH 750 LONG

FASCO SINGLE SHAFT MOTOR Model No.

Watts

Amps

Shaft

Type

Dimensions A B

133-50D543-01A

0.63

5/16

Anti-clockwise rotation Mounting B rear ends

133-50D505-71C

1.0

5/16

Clockwise rotation Mounting 4 rear studs

Code

List Price

$310.00

$228.00

FASCO – SINGLE SHAFT FAN MOTOR – 1300 RPM – 415V – SINGLE PHASE USED IN WELDERS ETC. Model No.

Watts

Amps

Shaft

Type

Dimensions A B

133-50D509-22A

0.4

5/16

Anti-clockwise Rot Mounting B-NDE

133-50D509-71C

0.4

5/16

Clockwise Rot Mounting B-NDE

Code

List Price

$220.00

$169.00

415v

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Long Shaft Motors

FASCO LONG SHAFT GLYCOL PUMP MOTOR Model No.

Watts

Amps

Shaft

Directions

Shaft Length

Dimension A

Code

List Price

133-50D521-76A

0.3

5/16

Anti-clockwise

140

$315.00

133-50D521-77A

0.3

5/16

Anti-clockwise

190

$315.00

FASCO – SINGLE SHAFT WITH FAN COWL – 1300 RPM – 230V SINGLE PHASE USED IN INCUBATORS, ETC. Model No.

Watts

Amps

Shaft

Type

Dimension

Shaft Length

Code

List Price

133-50D522-71C

0.45

5/16

Clockwise rotation Mounting A+B Drive end

105

212

105

$310.00

133-50D522-71A

0.45

5/16

Anti-clockwise rotation. Mounting A+B drive end

140

247

140

$310.00

Ø 105

B 25 FLAT

1.5

7.925 7.912

Ø 60

6.83 6.63 FLAT

3-HOLES 3/16"B.S.W. EQUISPACED 71.4 PCD

45 STRIPPED 4-HOLES 3/16"B.S.W. EQUISPACED 54.0 PCD LEAD LENGTH 750 LONG BOOTLACE Ø 1.85 X 10 LONG BROWN, BLUE AND GREEN/YELLOW LEADS

ATTACHED TO LEAD IN PLASTIC :-BAG 4-OFF SCREW 3/16 BSW 8MM POSI DRIVE 4-OFF WASHER SHAKEPROOF EXT 5MM ID

KULTHORN LONG SHAFT HUB DRIVE (4 Pole) Model No.

Watts

Amps

Capacitor

Type

Code

List Price

0.2

2MFD

Dual hub

$195.00

Watts

Amps

Capacitor

Type

Code

List Price

133-KJF2Y702K

0.37

2uf

Hub / 5/6 Shaft

$195.00

133-KJB2P4700K

0.41

N/A

2 x 5/16 Shaft

$125.00

133-KJF2E4701

0.41

N/A

Hub 3 Stud

$195.00

133-KJF4Y701A n

CW from Start End

KULTHORN AOM Model No.

86mm Diameter

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Single Shaft Body and Rear Mount Motors

SINGLE SHAFT REAR MOUNT 42 FRAME Model No.

Watts

Amps

OLE* Rotation

Shaft Length

Body Length

Capacitor MFD

T/ Box

Code

134-5KCP29DK-799T

0.95

A/CW

100

List Price

$320.00

NOTE: Capacitor not supplied - please order separately.

Ø144

230 107

1/2” (12.70mm)

'V' SEAL

Ø 12.695 12.665

SINGLE SHAFT BODY MOUNT 4POLE WITH TERMINAL BOX Part No.

Watts

Amps

Volts

Rotation

RPM

Capacitor

Code

List Price

134-8554LTB-A80

180

1.25

230

Reversible

1340

4mfd

$338.00

NOTE: Capacitor supplied with terminal box.

Ø144

230 100

1/2” (12.70mm)

'V' SEAL

terminal box

Ø 12.695 12.665

SINGLE SHAFT BODY MOUNT 4POLE Part No.

Watts

Amps

Volts

Rotation

RPM

Capacitor

Code

List Price

134-61S067-05

250

2.0

230

Clockwise

1340

4mfd

$408.00

NOTE: Capacitor not supplied - please order separately.

Ø144

230 107

1/2” (12.70mm)

'V' SEAL

Ø 12.695 12.665

SINGLE SHAFT BODY MOUNT 4POLE 3 PHASE Part No.

Watts

Amps

Volts

Rotation

RPM

Capacitor

Code

List Price

134-8534LTB-A12

180

0.75

400

Reversible

1340

$381.00

232 108

Ø144

NOTE: Capacitor supplied with terminal box.

1/2” (12.70mm)

terminal box

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

'V' SEAL

Ø 12.695 12.665

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Single Shaft Body and Rear Mount Motors

SINGLE SHAFT BODY MOUNT 6POLE Part No.

Watts

Amps

Volts

Rotation

RPM

Capacitor

Code

List Price

134-61S059-04

150

0.9

230

Clockwise

920

$455.00

134-8557NTA-A11

370

2.4

230

Clockwise

920

$475.00

NOTE: Capacitor not supplied - please order separately.

A B A

61S059-04

182

120

8557NTA-A11

258

157

100

Ø144

Model No.

Ø144

Dimensions

A B

1/2” (12.70mm) 1/2” (12.70mm)

'V' SEAL

Ø 12.695 12.665

'V' SEAL

Ø 12.695 12.665

SINGLE SHAFT BODY MOUNT 6POLE WITH TERMINAL BOX Part No.

Watts

Amps

Volts

Rotation

RPM

Capacitor

Code

List Price

134-8557KTB-A11

150

1.2

230

Reversible

900

$395.00

134-61S137-80

250

2.3

230

Reversible

920

$465.00

134-61S120-80

370

2.9

230

Reversible

920

$565.00

134-8557NTB-A11

370

2.65

230

Reversible

920

$575.00

NOTE: Capacitor supplied with terminal box. n

134-8557NTB-A11 has 5/8” shaft.

A B

Model No.

8557KTB-A11

234

119

61S137-80

258

132

61S120-80

265

144

Ø144

Dimensions

1/2” (12.70mm)

'V' SEAL

terminal box

Ø 12.695 12.665

SINGLE SHAFT LUG MOUNT 4POLE Part No.

Watts

Amps

Volts

Rotation

RPM

Capacitor

Code

List Price

100

0.9

230

ACW

1350

$345.00

134-61S036-03

NOTE: Capacitor not supplied - please order separately. n n

42Y Frame = 129mm 48Y Frame = 144mm

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Single Shaft Body and Rear Mount Motors

SINGLE SHAFT RESLIENT MOUNT 6POLE 3 PHASE Part No.

134-61S121-80 n

Watts

Amps

Volts

Rotation

RPM

Capacitor

Code

List Price

370

1.1

415

Reversible

890

$459.00

Replacement for 415V 1Ph 6p Fan Motors (Convert to 3Ph feed).

206.5 115

Ø 144

60 35 FLAT

11.43 FLAT Ø

12.695 12.665

LEADS 1500 LONG

BOOTLACE Ø 1.85 X 10 LONG BROWN,BLUE,BLACK LEADS

149.5

SINGLE SHAFT LUG MOUNT 6POLE Part No.

Watts

Amps

Volts

Rotation

RPM

Capacitor

Code

List Price

134-8557NVB-B11

400

3.0

230

Clockwise

940

$665.00

Replaces 9457 QTB-11.

NOTE: Capacitor not supplied - please order separately. 241

Ø 143 190 57.6 27

Ø 100

2-DIMPLES Ø 10 Ø

'V' SEAL

4-HOLES Ø 10.3 ON PCD 202.9

19.009 18.996

SLINGER

151 MAIN

BROWN

WHITE LOW

GREY

BLACK

BLUE

GRN/YELL

COM

O/L

HIGH

LOW

AUX

D 0 50 RIPPE ST

LEAD 2300 LONG WITH BRAIDED SLEEVE

BOOTLACE Ø 1.85 X 10 LONG WHITE,BROWN,GREY, GREY, LEADS

EYE TERMINAL 5MM GREEN/YELLOW LEAD

CAPACITOR NOT SUPPLIED MOTOR AS SUPPLIED DOES NOT HAVE OVERLOAD CONNECTED IN CIRCUIT. THE OVERLOAD (TWO GREY LEADS) MUST BE EXTERNALLY CONNECTED, EITHER WITH EXTERNAL CONTROL OR IN SERIES WITH COMMON (BLACK) CONNECTION

6.3MM RECEPTACLE INSULATED BLUE,BLACK LEADS

FASCO B56 FRAME – FAN MOTOR 960 RPM 3Ø - 3 PHASE Model No.

Shaft Dia

Type

Code

List Price

135-9436NTB-B11

0.37

0.5

5/8

Lug Mount

$565.00

n n

Fan Duty Only Motor. Fan Blades available - made to measure. See Fans and Blower Section.

NOTE: Capacitor not supplied - please order separately.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Single Shaft Reslient Mount

SINGLE 1/2” SHAFT 1350 RPM – MULTIPLE SPEED Model No.

Watts

Amps

OLE* Rotation

134-61S109-03

315

2.5

134-61S082-03

600

3.8

134-61S128-03

750

4.4

Capacitor MFD

Code

Clockwise

235

119

100

137

Clockwise

258

127

100

161

Clockwise

258

127

100

161

List Price

$370.00

$420.00

$450.00

NOTE: Capacitor not supplied - please order separately.

Ø 144

C E

12.695 12.665

11.43 FLAT

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Double Shaft Motors - 42 Frame 3 Speed

DOUBLE SHAFT RESILIENT MOUNT 42 FRAME GE 4POLE Part No.

134-5KCP29JG-57

Watts

Amps

Volts

Rotation OLE

RPM

Capacitor

Code

List Price

250

1.4

230

ACW

1400

7.5

$420.00

NOTE: Capacitor not supplied - please order separately.

A B

Model No.

5KCP29JG-5797

495

114

175

130

125

12.695 12.665 (BOTH ENDS) Ø

Dimensions

DOUBLE SHAFT RESILIENT MOUNT 42 FRAME KULTHORN 4POLE Part No.

Watts

Amps

Volts

Rotation OLE

RPM

Capacitor

Code

List Price

134-KDE2E4734

0.6

230

1200

4.0

$305.00

134-KDE2E4735

.75

230

1200

4.0

$322.00

134-KDE2F4708

120

1.0

230

1200

5.0

$340.00

NOTE: Capacitor not supplied - please order separately.

A B

Model No.

KDE2E4734

495

190

105

125

KDE2F4708

535

100

200

115

125

134-KDE2E4735

535

220

105

125

12.695 12.665 (BOTH ENDS) Ø

Dimensions

DOUBLE SHAFT RESILIENT MOUNT 42 FRAME KULTHORN 6POLE Part No.

134-KDE3E4703

Watts

Amps

Volts

Rotation OLE

RPM

Capacitor

Code

List Price

0.37

230

900

3.0

$315.00

NOTE: Capacitor not supplied - please order separately.

Model No.

KDE3E4703

535

210

106

125

12.695 12.665 (BOTH ENDS) Ø

A B

Dimensions

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Double Shaft Motors - 48 Frame 3 Speed

DOUBLE SHAFT FASCO RESILIENT MOUNT 4POLE Part No.

Watts

Amps

Volts

Rotation OLE

RPM

Capacitor

Code

List Price

134-61S083-80

100

1.1

230

1370

$375.00

134-61S019-80

250

1.8

230

ACW

1300

$399.00

134-61S109-01

314-425

3.6

230

1315

4-10

$419.00

134-61S082-80

600

4.0

230

1330

$450.00

134-8555QVA-A11

750

4.9

230

1360

$495.00

NOTE: Capacitor not supplied - please order separately. Dimensions

61S083-80

493

189

115

143

61S019-80

517

107

206

122

143

61S109-01

523

119

202

134

143

61S082-80

610

139

225

157

143

8555QVA-A11

610

143

225

157

143

A B

12.695 12.665 (BOTH ENDS) Ø

Model No.

DOUBLE SHAFT KULTHORN RESILIENT MOUNT 6 POLE Part No.

Watts

Amps

Volts

Rotation OLE

RPM

Capacitor

Code

List Price

134-KHF2K4701

370

3.48

230

1090

7.5

$545.00

134-KHF2U4701

550

5.0

230

1090

$610.00

134-KHF2U4702

750

6.9

230

1090

$625.00

NOTE: Capacitor not supplied - please order separately.

Dimensions A

KHF2K4701

540

118

242

147

143

KHF2U4701

635

137

250

165

143

KHF2U4702

635

137

250

165

143

12.695 12.665 (BOTH ENDS) Ø

Model No.

A B

DOUBLE SHAFT RESILENT MOUNT 6POLE Part No.

134-61S004-80

Watts

Amps

Volts

Rotation OLE

RPM

Capacitor

Code

List Price

200

2.0

230

890

$454.00

NOTE: Capacitor not supplied - please order separately.

Model No.

61S004-80

523

119

201

133

143

12.695 12.665 (BOTH ENDS) Ø

A B

Dimensions

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Double Shaft Motors - 56 Frame 3 Speed

DOUBLE SHAFT FASCO RESILIENT MOUNT 4POLE 56 FRAME Part No.

Watts

Amps

Volts

Rotation OLE

RPM

Capacitor

Code

List Price

135-9455SVA-B12

1100

6.3

230

1420

$883.00

135-9455XVB-B13

1500

8.4

230

1400

$918.00

NOTE: Capacitor not supplied - please order separately. A B

Dimensions A

9455SVA-B12

655

230

176

303

164

9455XVB-B13

735

195

234

268

164

12.695 12.665 (BOTH ENDS) Ø

Model No.

Blower Wheels - See Page 82

Complete Blower Units - See Page 146

Overloads and capacitors - See Page 436

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Fan Motor Mounting Accessories

RAIN SHIELD Part No.

Description

Shaft Size

Code

List Price

330-CT85-007

Plastic Shaft Slinger 100mm OD

½”

$11.00

330-8725-6021

Plastic Shaft slinger 170mm OD

½”

$37.00

330-8860-6000

Plastic Shaft slinger 170mm OD

5/8”

$37.00

Description

Shaft Size

Code

List Price

RAIN SHIELD Part No.

330-RS80F

Rain Shield 80 Frame

$36.00

330-RS90F

Rain Shield 90 Frame

$36.00

330-RS100F

Rain Shield 100 Frame

$36.00

330-RS112F

Rain Shield 112 Frame

$49.00

330-RS132F

Rain Shield 132 Frame

$49.00

330-RS160F

Rain Shield 160 Frame

$49.00

MOUNTING BAND-STUD MOUNT TO FIT 144MM DIAMETER MOTOR (48 Frame) Part No.

Description

Thread

Code

List Price

330-391-127-V

3 or 4 Stud mount band (multi mount bushes)

3/8” BSW

$48.00

MOUNTING BAND-LUG MOUNT TO FIT 144MM DIAMETER MOTOR (48 Frame) Part No.

330-391-127-L

Description

PCD

Code

List Price

4 lug mount (2x7.2mm hole)

171X202

$58.00

Type

Code

List Price

3 arm mounting kit

$41.00

Bolts not supplied

RESILIENT MOTOR MOUNT KIT Part No.

330-MECCANOKIT

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Pump Replacement Motors

FILTERMASTER PUMP REPLACEMENT MOTORS Part No.

Input Watts

Code

List Price

120-20307

1.0

1200

$650.00

120-20308

1.5

1500

$650.00

Input Watts

Code

List Price

1.0

1200

$789.00

FILTERMASTER PUMP REPLACEMENT MOTORS Part No.

120-20907

WATERCO PUMP REPLACEMENT MOTORS Part No.

Model

Input Watts

Code

List Price

120-21013

H/Storm 100/200 7252STD-A14

1.5

1500

$605.00

120-21015

H/Storm 200/250

2100 1Ph

2100

$875.00

120-21016

H/Storm 200/250

2100W 3Ph

2400

$985.00

Model

Input Watts

Code

Price

120-21205

EP750, Q7005, EP930

1.0

1200

$585.00

120-21212

EP1100 7252STD-A16

1.5

1500

$650.00

120-21206

SQ400 Super Quiet Q7006

1.0

1200

$585.00

120-21213

SQ600 7252STD-A13

1.5

1500

$655.00

120-21214

SQ700 7252XTD-A11

2.0

2100

$1500.00

120-21219

SQ700 3Ph

2.0

2100

$990.00

Supertuf / Aquastream/Superflo, Superstorm / Portapac –

POOLRITE PUMP REPLACEMENT MOTORS Part No.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Pump Replacement Motors

NEMA FLANGE PUMP MOTORS - 16MM SHAFT Part No.

120-21007 Fits

Model

Input Watts

Code

List Price

6452QTH-A11 – No Foot

1.0 (750W)

1100

$525.00

1.0 (750W)

1100

$495.00

1.5 (1100W)

1500

$575.00

2.0(1500W)

2100

$585.00

3.0(2200W)

3300

$720.00

Aquastream Solar MK11 Aquamite 50-125 Supastream 75-125 Supertuf 100,125 Hurlcon CX180/240, FX190

120-21008 Fits

6452QTH-A11 – Fitted with Foot Aquastream 50-125 (Clarke/Filtrite) Aquastream Solar Delta Hot Finsbury Vortex Pool 3000,4000 Magnum 550W,750W* Monster 550W,750W Maxiflow 1.5HP* (early type 16mm shaft) Portapac - Demand/Elite (1.SHP) Questa

120-20611 Fits

7252STE-A13 Finsbury Vortex Pool 5000 Magnum 1100W,1500W* Monster 1100W,1500W Starite Duraglass 1.0,1.5HP Supertuf 150,200 Aquastream 150 Superstream 125,150 Superflo 150 Maxiflow 2.0HP* (early type 16mm shaft) Silent Flow 1100 Hurlcon CX280/320/Questa

120-7252XTE-A11 Fits

7252XTE-A11 Starite Duraglass 2HP Supertuf 250 Superflo 200 Maxiflow 3.0HP* (early type 16mm shaft) Hurlcon CX400

120-9252VTK-A14 Fits

9252VTK-A14 Starite Duraglass 3HP Supertuf 300 Superflo 300,350

*Magnum & Maxiflow later version have 12mm shaft. Contact Argon.

DAVIES PUMP SERVICE MOTORS Part No.

Model

Type

Code

List Price

345-D186201

K3/4, K11/4, SPK3/4, SPK11/4

1.25/0.93

1 Ph

$890.00

345-D186244

K3/4, K11/4, SPK3/4, SPK11/4

1.25/0.93

3 Ph

$890.00

345-D186334

K3B

3/2.2

3 Ph

$980.00

345-D186430

K5B (built to order)

5hp/7.5

3 Ph

$2700.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

9 Series Imperial B56 Frame

2800 RPM – 2 POLE - TEFC Ø 230V 1Ph B56 FRAME Part No.

Model No.

Shaft Dia

Code

List Price

135-9212 NTE

809212NTE-C01

0.37

0.5

5/8

$540.00

135-9222 QTE

809222QTE-C01

0.75

5/8

$655.00

135-9222 STE

809222STE-C01

1.1

1.5

5/8

$675.00

135-9222 XTE

809222XTE-C01

1.5

3/4

POA

1400 RPM – 4 POLE - TEFC Ø 230V 1Ph B56 FRAME Part No.

Model No.

Shaft Dia

Code

List Price

135-9414 NTE

809414NTE-C01

0.37

0.5

5/8

$580.00

135-9424 PTE

809424PTE-C01

0.55

0.75

5/8

$660.00

135-9424 QTE

809424QTE-C01

0.75

5/8

$685.00

135-9424 STE

809424STE-C01

1.1

1.5

5/8

$705.00

135-9424 XTE

809424XTE-C01

1.5

3/4

$810.00

Shaft Dia

Code

List Price

0.37

0.5

5/8

$575.00

Code

List Price

960 RPM – 6 POLE - TEFC Ø 230V 1Ph B56 FRAME Part No.

135-9416 NTE

Model No.

809416NTE-C01

Features (All single phase versions): n Reversible. n Manual reset overload. n Capacitor start.

FASCO – B56 FRAME 1400 RPM 3Ø - 3 PHASE B56 FRAME Model No.

Amps

Shaft Dia

Type

135-9434NTE

0.37

0.5

1.1

5/8

TEFC 230/400V

$535.00

135-9434QTE

0.75

1.8

5/8

TEFC 230/400V

$650.00

FASCO 9 SERIES FLANGE OPTIONS Part No.

Spigot

Thread

Hole Centre PCD

Code

List Price

330-B56 C

120.65mm

5/16 BSW

139.7mm

$75.00

330-Nema 56

114.3mm

3/8 UNC

149.23mm

$75.00

Please specify if you need Flange fitted to motor

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

9 Series Dimensions

9 SERIES TECHNICAL DATA Part No.

Model

Shaft

Amps

Start Cap

Run Cap

MFD/V

135-9212NTE-C01

809212NTE-C01

290

242.5

5/8

3.6

120/250

135-9222QTE-C01

809222QTE-C01

290

242.5

5/8

5.7

120/250

6/450

135-9222STE-C01

809222STE-C01

290

242.5

5/8

7.24

120/250

12/450

135-9222XTE-C01

809222XTE-C01

310

262.5

3/4

8.7

120/250

25/450

135-9414NTE-C01

809414NTE-C01

290

242.5

5/8

3.7

120/250

135-9424PTE-C01

809424PTE-C01

290

242.5

5/8

4.4

120/250

6/450

135-9424QTE-C01

809424QTE-C01

290

242.5

5/8

5.3

120/250

20/450

135-9424STE-C01

809424STE-C01

340

292

5/8

7.0

120/250

30/450

135-9424XTE-C01

809424XTE-C01

365

315

3/4

8.6

120/250

30/450

135-9416NTE-C01

809416NTE-C01

320

272.5

5/8

4.6

120/230

135-9434NTE-C01

809434NTE-C01

290

242.5

5/8

1.1/1.96

135-9434QTE-C01

809434QTE-C01

290

242.5

5/8

1.9/3.3

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Drip Proof Single Phase Commercial Dryer Motor

ELECTRIC MOTORS

FASCO GENERAL PURPOSE MOTOR - 4 POLE 1 PHASE Part No.

135-9414NVB-C01

Model No.

Shaft Dia

Code

List Price

809414NVB-C01

0.37

0.5

5/8

$556.00

270

Ø 164

222.3

32 FULL DEPTH

Ø 15.86 1.5 76.2

47.6

123.8

4.80 4.75

17.92 MAX.

START CAP.

22.2

VIOLET WHITE

10A LEAD 2100 LONG

101.6

4-HOLES Ø 10

8.71 (4-PLACES)

BROWN

GREY

NOTE:MIAN TO A & S TO REVERSE ROTATION TRANSPOSE BLUE AND WHITE LEADS.

MODEL

TOL

125

S/W GREY

R/W

MOTOR WT. 10.8KG.

BLUE

OUTPUT (W)

VOLTAGE (V)

FREQ. (H Z)

PHASE

FASCO RESILIENT MOUNT - MULTI SPEED50- 1 PHASE 370 240 No. SPEED (rpm)

1450

CW-Drive End

MOUNTINGA

START CAP kW(µF/V)

Foot

200/250

135-9455XVB-B14

809455XVB-B14

ROTATION

3.6

Ball Bearing

809455QVB-B13

Multi speed.

CURRENT (A)

BEARINGS Model No.

135-9455QVB-B13

140 166

BLACK

809414NVB-C01 NO. SPEEDS Part

76.2

RED A BROWN

335 360

PSC (permanent capacitor).

RUN CAP (µF/V) HP Code

0.75

1.0

1.5

2.0

Nil

List Price

$865.00

$990.00

Fan Duty Only.

335 335

Ø 164 Ø 164

47.6 47.6

223 223

32 FLAT 32 FLAT

76.2 76.2 LEAD 1100 LONG LEAD 1100 LONG

89 89

14.7 14.7 FLAT FLAT Ø 15.86 Ø 15.86 123.8 123.8

70 70

98.4 98.4

6.3MM RECEPTACLE 6.3MM RECEPTACLE

8.5 8.5(6-PLACES) (6-PLACES) 2-HOLES Ø 8 2-HOLES Ø 8

BLACK BLACK

O/L

GREY GREY O/L GREY GREY

BLUE BLUE BROWN BROWN BLACK BLACK

BLUE BLUE

15.9 15.9 76.2 76.2 275.7 275.7

GRN/YELLOW GRN/YELLOW

MOTOR WT. 18.1KG. MOTOR WT. 18.1KG.

63.2 63.2

19.5 19.5

WHITE WHITE

170 170 123.8 123.8

LOW WDG MAIN WDG

WHITE WHITE

RED START WDG

MAIN WDG

2 S2 30 ST T3R0IP RIP PE PE D D

VIOLET VIOLET RED

START WDG

LOW WDG

BROWN BROWN

MODEL MODEL

OUTPUT(W) (W) OUTPUT

VOLTAGE(V) (V) VOLTAGE

FREQ.(H(H Z) FREQ. Z)

PHASE PHASE

CURRENT(A) (A) CURRENT

ROTATION ROTATION

809455QVB-B13S 809455QVB-B13S

750 750

240 240

5050

4.6 4.6

CW-Drive End CW-Drive End

NO.SPEEDS SPEEDS NO.

SPEED(rpm) (rpm) SPEED

BEARINGS BEARINGS

MOUNTING MOUNTING

STARTCAP CAP(µF/V) (µF/V) START

RUN CAP (µF/V) RUN CAP (µF/V)

1400 1400

BallBearing Bearing Ball

ResilientCradle Cradle Resilient

Nil Nil

20/400 20/400

COMMERCIAL DRYER MOTOR – 4 POLE 1 PHASE Model

Shaft

150-MPC59T4 HH-58

5/8 x 105mm

Type

Cap start - Res MT

Code

List Price

$890.00

Customer contact.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Bricksaw Motor, Compressor Motor 3Ph Imperial Frame

ELECTRIC MOTORS

FASCO BRICKSAW MOTOR – 2 POLE 1 PHASE Model No.

Rot

Amps

Shaft Dia

Switch

Code

List Price

135-9222XTE – C11

1.5

9.5

¾”

Right hand side*

$935.00

135-9222XTE – C12

1.5

ACW

9.5

¾”

Left hand side

$935.00

n Totally enclosed – on/off switch. *As shown in the picture.

FASCO FAL SERIES COMPRESSOR MOTOR – 2 POLE 1 PHASE Model No.

Amps

Shaft Dia

Type

Code

List Price

135-FAL901-2

1.65

9.8

¾”

TEFC

$606.00

135-FAL902-2

2.2

13.5

¾”

TEFC

$730.00

Single Phase, 50Hz compressor motor, totally enclosed fan cooled. n Aluminium ribbed construction. n Class F insulation. n IP54 protection rating. n Heavy duty centrifugal switch. n B56 mounting. n Rotation anti-clockwise (not reversible).

FASCO COMPRESSOR MOTOR – 2 POLE 1 PHASE Model No.

Amps

Shaft Dia

Type

Code

List Price

135-9122XVB - CO1

1.6

9.6

¾”

CSCR

$630.00

135-9122VVB - CO1

2.2

13.5

¾”

CSCR fan cooled

$675.00

Single Phase, 50Hz compressor motor, Drip proof. n Heavy duty rolled steel construction. n Class F insulation. n Ventilated IP22.

CROMPTON – B56 FRAME – 4 POLE 3 PHASE Model No.

Amps

Shaft Dia

Type

Code

List Price

150-MMA54G4TF

0.37

0.5

1.1

5/8

TEFC

$385.00

Suitable for roller door drives.

CMG – B56 FRAME – 4 POLE 3 PHASE Model No.

150-CWC3626J n n

Amps

Shaft Dia

Type

Code

List Price

0.75

2.0

5/8

TEFC, Foot/MT

$725.00

Foot can be unbolted for clamp mounting. Air-over application only.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Betts Dimensions CSRC and PSC

BETTS CSCR and PSC ELECTRIC MOTORS Betts Single Phase Induction Motors are a range of high-quality aluminium metric frame, Totally Enclosed Fan Cooled (TEFC), squirrel cage induction motors. The range includes PSC and CSCR type motors for a wide range of applications. n Aluminium motor frame, terminal box, end-shields and flanges n IP55 n Standard Foot Mount (removable) n B3, B5 and B14 Flange Options n Power Supply, 230V Single phase 50Hz. n 2 or 4 pole. n Continuous S1 duty rated. n -15 to +40 ambient conditions. n Maximum altitude 1000m. n Shaft seals both ends of rotor. n Sealed Ball Bearings each end. n Rating plate fitted to each motor. n Black Painted finish for corrosion protection.

BETTS CSCR and PSC DIMENSIONS Foot (B3) Frame

Flange (B5) E

Flange (B14)

112

136

141

109

M18

218

130

110

160

3.5

105

2.5

125

153

157

158

100

15.5

M20

288

21.5

165

130

200

3.5

100

120

90S

140

174

176

167

100

M20

319

165

130

200

3.5

115

140

90L

140

175

176

167

125

M20

337

165

130

200

3.5

115

140

100L

160

193

191

177

140

M10

100

M20

378

215

180

250

14.5

130

110

160

3.5

B14

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

BETTS SINGLE PHASE PSC Part No.

Frame Size

Speed

Full Load Amps

Code

List Price

230v 2 POLE B3

181-BTA-0037-2B3

0.37

2750

2.6

$235.00

181-BTA-0055-2B3

0.55

2760

3.7

$265.00

181-BTA-0075-2B3

0.75

2780

$275.00

181-BTA-0110-2B3

1.1

2790

6.7

$300.00

181-BTA-0150-2B3

1.5

90S

2800

$460.00

181-BTA-0220-2B3

2.2

90L

2800

$560.00

2750

2.6

$255.00

2 POLE B5

181-BTA-0037-2B5

0.37

181-BTA-0055-2B5

0.55

2760

3.7

$290.00

181-BTA-0075-2B5

0.75

2780

$300.00

181-BTA-0110-2B5

1.1

2790

6.7

$330.00

181-BTA-0150-2B5

1.5

90S

2800

$505.00

181-BTA-0220-2B5

2.2

90L

2800

$615.00

181-BTA-0037-2B14

0.37

2750

2.6

$255.00

181-BTA-0055-2B14

0.55

2760

3.7

$290.00

181-BTA-0075-2B14

0.75

2780

$300.00

181-BTA-0110-2B14

1.1

2790

6.7

$330.00

181-BTA-0150-2B14

1.5

90S

2800

$505.00

181-BTA-0220-2B14

2.2

90L

2800

$615.00

2 POLE B14

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Betts Single Phase PSC 4 pole

BETTS SINGLE PHASE PSC Part No.

Frame Size

Speed

Full Load Amps

Code

List Price

230v 4 POLE B3

181-BTA-0025-4B3

0.25

1370

1.93

$245.00

181-BTA-0037-4B3

0.37

1370

2.8

$270.00

181-BTA-0055-4B3

0.55

1380

$295.00

181-BTA-0075-4B3

0.75

1380

5.2

$320.00

181-BTA-0110-4B3

1.1

90S

1390

$445.00

181-BTA-0150-4B3

1.5

90L

1400

9.4

$510.00

181-BTA-0220-4B3

2.2

100L

1400

12.3

$585.00

4 POLE B5

181-BTA-0025-4B5

0.25

1370

1.93

$270.00

181-BTA-0037-4B5

0.37

1370

2.8

$295.00

181-BTA-0055-4B5

0.55

1380

$320.00

181-BTA-0075-4B5

0.75

1380

5.2

$355.00

181-BTA-0110-4B5

1.1

90S

1390

$490.00

181-BTA-0150-4B5

1.5

90L

1400

9.4

$565.00

181-BTA-0220-4B5

2.2

100L

1400

12.3

$640.00

181-BTA-0025-4B14

0.25

1370

1.93

$270.00

181-BTA-0037-4B14

0.37

1370

2.8

$295.00

181-BTA-0055-4B14

0.55

1380

$320.00

181-BTA-0075-4B14

0.75

1380

5.2

$355.00

181-BTA-0110-4B14

1.1

90S

1390

$490.00

181-BTA-0150-4B14

1.5

90L

1400

9.4

$565.00

181-BTA-0220-4B14

2.2

100L

1400

12.3

$640.00

4 POLE B14

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Betts Single Phase CSCR 2 Pole

BETTS SINGLE PHASE CSCR Part No.

Frame Size

Speed

Full Load Amps

Code

List Price

230v 2 POLE B3

181-BTC-0018-2B3

0.18

181-BTC-0025-2B3

0.25

181-BTC-0037-2B3

0.37

1370

1.26

$240.00

1370

1.74

$255.00

2750

2.6

$275.00

181-BTC-0055-2B3

0.55

2760

3.7

$335.00

181-BTC-0075-2B3

0.75

2780

4.9

$365.00

181-BTC-0110-2B3

1.1

2790

6.7

$375.00

181-BTC-0150-2B3

1.5

90S

2800

9.1

$500.00

181-BTC-0220-2B3

2.2

90L

2800

13.2

$545.00

181-BTC-0300-2B3

100L

2820

17.6

$620.00

1370

1.26

$265.00

2 POLE B5

181-BTC-0018-2B5

0.18

181-BTC-0025-2B5

0.25

1370

1.74

$285.00

181-BTC-0037-2B5

0.37

2750

2.6

$300.00

181-BTC-0055-2B5

0.55

2760

3.7

$365.00

181-BTC-0075-2B5

0.75

2780

4.9

$400.00

181-BTC-0110-2B5

1.1

2790

6.7

$415.00

181-BTC-0150-2B5

1.5

90S

2800

9.1

$550.00

181-BTC-0220-2B5

2.2

90L

2800

13.2

$600.00

181-BTC-0300-2B5

100L

2820

17.6

$680.00

181-BTC-0018-2B14

0.18

1370

1.26

$265.00

2 POLE B14

181-BTC-0025-2B14

0.25

1370

1.74

$285.00

181-BTC-0037-2B14

0.37

2750

2.6

$300.00

181-BTC-0055-2B14

0.55

2760

3.7

$365.00

181-BTC-0075-2B14

0.75

2780

4.9

$400.00

181-BTC-0110-2B14

1.1

2790

6.7

$415.00

181-BTC-0150-2B14

1.5

90S

2800

9.1

$550.00

181-BTC-0220-2B14

2.2

90L

2800

13.2

$600.00

181-BTC-0300-2B14

100L

2820

17.6

$680.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Betts Single Phase CSCR 4 pole

BETTS SINGLE PHASE CSCR Part No.

Frame Size

Speed

Full Load Amps

Code

List Price

230v 4 POLE B3

181-BTC-0012-4B3

0.12

1370

0.97

$250.00

181-BTC-0018-4B3

0.18

1370

1.4

$265.00

181-BTC-0025-4B3

0.25

1370

1.9

$300.00

181-BTC-0037-4B3

0.37

1370

2.7

$315.00

181-BTC-0055-4B3

0.55

1380

3.7

$375.00

181-BTC-0075-4B3

0.75

1380

4.6

$395.00

181-BTC-0110-4B3

1.1

90S

1390

$500.00

181-BTC-0150-4B3

1.5

90L

1410

9.4

$590.00

181-BTC-0220-4B3

2.2

100L

1420

13.4

$680.00

181-BTC-0300-4B3

100L

1420

17.8

$765.00

4 POLE B5

181-BTC-0012-4B5

0.12

1370

0.97

$275.00

181-BTC-0018-4B5

0.18

1370

1.4

$290.00

181-BTC-0025-4B5

0.25

1370

1.9

$330.00

181-BTC-0037-4B5

0.37

1370

2.7

$350.00

181-BTC-0055-4B5

0.55

1380

3.7

$415.00

181-BTC-0075-4B5

0.75

1380

4.6

$435.00

181-BTC-0110-4B5

1.1

90S

1390

$550.00

181-BTC-0150-4B5

1.5

90L

1410

9.4

$650.00

181-BTC-0220-4B5

2.2

100L

1420

13.4

$745.00

181-BTC-0300-4B5

100L

1420

17.8

$845.00

181-BTC-0012-4B14

0.12

1370

0.97

$275.00

181-BTC-0018-4B14

0.18

1370

1.4

$290.00

4 POLE B14

181-BTC-0025-4B14

0.25

1370

1.9

$330.00

181-BTC-0037-4B14

0.37

1370

2.7

$350.00

181-BTC-0055-4B14

0.55

1380

3.7

$415.00

181-BTC-0075-4B14

0.75

1380

4.6

$435.00

181-BTC-0110-4B14

1.1

90S

1390

$550.00

181-BTC-0150-4B14

1.5

90L

1410

9.4

$650.00

181-BTC-0220-4B14

2.2

100L

1420

13.4

$745.00

181-BTC-0300-4B14

100L

1420

17.8

$845.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Betts Dimensions 3 Phase

BETTS 3 PHASE ELECTRIC MOTORS

BETTS 3 PHASE DIMENSIONS Foot (B3) Frame

80M-1

125

100

M6x16

15.5

M20x1.5

154

157

124

204

21.5

9.5

296

1.5

80M-2

125

100

M6x16

15.5

M20x1.5

154

157

124

204

21.5

9.5

331

1.5

90S

140

100

M8x20

M25x1.5

180

175

143

233

324

1.5

90L

140

125

M8x20

M25x1.5

180

175

143

233

349

1.5

100L-1

160

140

M10x22

100

M25x1.5

200

199

159

259

374

100L-2

160

140

M10x22

100

M25x1.5

200

199

159

259

418

112

190

140

M10x22

112

M25x1.5

230

222

169

281

381

BETTS 3 PHASE DIMENSIONS Flange (B5)

Flange (14)

Frame

80M-1

165

130

200

3.5

100

120

80M-2

165

130

200

3.5

100

120

90S

165

130

200

3.5

115

140

90L

165

130

200

3.5

115

140

100L-1

215

180

250

14.5

130

110

160

3.5

100L-2

215

180

250

14.5

130

110

160

3.5

112

215

180

250

14.5

130

110

160

3.5

Aluminium motor frame, terminal box, end-shields and flanges. n IP55. n Standard Foot Mount (removable). n B3, B5 and B14 Flange Options. n Power Supply, 230/400V Three phase 50Hz. n 2 or 4 pole. n High Efficiency IE3. n Continuous S1 duty rated. n -15 to +40 ambient conditions. n Maximum altitude 1000m. n Shaft seals both ends of rotor. n Sealed Ball Bearings each end. n Rating plate fitted to each motor n Black Painted finish for corrosion protection.

B14

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Betts Three Phase 2 Pole

BETTS THREE PHASE Part No.

Frame Size

Speed

Full Load Amps

Code

List Price

$205.00

400V 2 POLE B3

181-BTG-0037-2B3

0.37

2780

0.9

181-BTG-0055-2B3

0.55

2780

1.21

$245.00

181-BTG-0075-2B3

0.75

80M1

2855

1.68

$310.00

181-BTG-0110-2B3

1.1

80M2

2855

2.4

$320.00

181-BTG-0150-2B3

1.5

90S

2900

2.92

$470.00

181-BTG-0220-2B3

2.2

90L

2900

4.15

$520.00

181-BTG-0300-2B3

100L

2910

5.59

$735.00

2780

0.9

$225.00

2 POLE B5

181-BTG-0037-2B5

0.37

181-BTG-0055-2B5

0.55

2780

1.21

$270.00

181-BTG-0075-2B5

0.75

80M1

2855

1.68

$340.00

181-BTG-0110-2B5

1.1

80M2

2855

2.4

$350.00

181-BTG-0150-2B5

1.5

90S

2900

2.92

$515.00

181-BTG-0220-2B5

2.2

90L

2900

4.15

$570.00

181-BTG-0300-2B5

100L

2910

5.59

$805.00

2780

0.9

$225.00

2 POLE B14

181-BTG-0037-2B14

0.37

181-BTG-0055-2B14

0.55

2780

1.21

$270.00

181-BTG-0075-2B14

0.75

80M1

2855

1.68

$340.00

181-BTG-0110-2B14

1.1

80M2

2855

2.4

$350.00

181-BTG-0150-2B14

1.5

90S

2900

2.92

$515.00

181-BTG-0220-2B14

2.2

90L

2900

4.15

$570.00

181-BTG-0300-2B14

100L

2910

5.59

$805.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Betts Three Phase 4 pole

BETTS THREE PHASE Part No.

Frame Size

Speed

Full Load Amps

Code

List Price

$230.00

400v 4 POLE B3

181-BTG-0025-4B3

0.25

1375

0.68

181-BTG-0037-4B3

0.37

1390

0.97

$260.00

181-BTG-0055-4B3

0.55

80M1

1425

1.4

$390.00

181-BTG-0075-4B3

0.75

80M2

1425

1.8

$415.00

181-BTG-0110-4B3

1.1

90S

1440

2.42

$510.00

181-BTG-0150-4B3

1.5

90L

1440

3.21

$580.00

181-BTG-0220-4B3

2.2

100L1

1445

4.92

$720.00

181-BTG-0300-4B3

100L2

1445

6.1

$840.00

4 POLE B5

181-BTG-0025-4B5

0.25

1375

0.68

$250.00

181-BTG-0037-4B5

0.37

1390

0.97

$285.00

181-BTG-0055-4B5

0.55

80M1

1425

1.4

$430.00

181-BTG-0075-4B5

0.75

80M2

1425

1.8

$455.00

181-BTG-0110-4B5

1.1

90S

1440

2.42

$560.00

181-BTG-0150-4B5

1.5

90L

1440

3.21

$640.00

181-BTG-0220-4B5

2.2

100L1

1445

4.92

$795.00

181-BTG-0300-4B5

100L2

1445

6.1

$925.00

1375

0.68

$250.00

4 POLE B14

181-BTG-0025-4B14

0.25

181-BTG-0037-4B14

0.37

1390

0.97

$285.00

181-BTG-0055-4B14

0.55

80M1

1425

1.4

$430.00

181-BTG-0075-4B14

0.75

80M2

1425

1.8

$455.00

181-BTG-0110-4B14

1.1

90S

1440

2.42

$560.00

181-BTG-0150-4B14

1.5

90L

1440

3.21

$640.00

181-BTG-0220-4B14

2.2

100L1

1445

4.92

$795.00

181-BTG-0300-4B14

100L2

1445

6.1

$925.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

CMG MTC Series

CMG - MTC SINGLE PHASE METRIC FRAME MOTORS CMG’s MTC series are an ideal general purpose single phase cap start-cap run. Motor design The motors are low weight cast aluminum and boast options which are unequalled by any other range of small frame electric motor on the market today. Multi-mount feature The standard MT motor is supplied with the terminal box top mounted, and has detachable feet. The unique multimount design allows the motor feet to be removed and the motor mounted from any of the eight mounting pads. This feature means that for axial flow fans there is no need for a motor mount in the fan case, which enables quicker assembly times, lower cost, and fewer restrictions to air flow. Standards and specifications The main dimensions and rated outputs of the MT series generally conform to Australian Standard AS/NZS1359 (CENELEC kW-frame size allocation table) and International Standards IEC 60034 and IEC 60072. Operating parameters n Standard MT series motors are designed with the following parameters: n Continuous duty (S1). n Single phase: 220-240 Volt 50Hz power supply. n Ambient temperatures up to 40°C. n Installation at altitudes up to 1000 metres. Performance data is based on these parameters and may need adjustment for different conditions. F class insulation, B class temperature rise MT motors have F class insulation and B class temperature rise, ensuring cool running of the motor. Degree of protection Level of enclosure protection for the MT series is IP55 (increased IP ratings available). Shafts are fitted with an oil seal as standard. Air movement application Low weight design and the standard drilled and tapped hole in the shaft makes the MT series ideally suited for all air movement applications. Gearbox fitment The MT series small frame and unpainted design makes it ideal for fitting to smaller aluminum gearboxes. Finish Standard surface finish is unpainted clean sandblasted aluminum. Bearings Bearings fitted are deep groove ball type and are the same size both ends. Top mounted terminal box The standard position of the terminal box is on top of the motor, allowing for ease of connection to supply. The terminal box is separate from the body of the motor allowing it to be rotated for additional convenience when connecting to supply.

Motor Frame

Bearing Size

n n

6201-2RS

6202-2RS

6204-2RS

6205-2RS

100

6206-2RS

112

6206-2RS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

220-240V, 50Hz Single phase. Capacitor start and Capacitor run. IP55 protection. Class F Insulation. Aluminum Frame Motor, Endshield/Flanges. Totally enclosed fan cooled. B class Temperature Rise. Manual Reset Overload Protector Fitted. Multi-Mount Feet.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

CMG MTC Series 2 Pole

CMG MTC SERIES - CAPACITOR START, CAPACITOR RUN Part No.

Frame Size

Speed

Full Load Amps 220v

Code

List Price

240v

2 POLE B3

180-MTC-711-2

0.37

2780

2.5

2.3

$336.00

180-MTC-712-2

0.55

2790

3.6

3.3

$368.00

180-MTC-801-2

0.75

2800

4.7

4.4

$469.00

180-MTC-802-2

1.1

2810

6.7

6.2

$519.00

180-MTC-90S-2

1.5

90S

2810

9.0

8.3

$628.00

180-MTC-90L-2

2.2

90L

2810

13.1

12.0

$735.00

180-MTC-100L-2

100L

2830

17.4

15.9

$835.00

2 POLE B5

180-MTC-711-2-B5

0.37

2780

2.5

2.3

$360.00

180-MTC-712-2-B5

0.55

2790

3.6

3.3

$392.00

180-MTC-801-2-B5

0.75

2800

4.7

4.4

$502.00

180-MTC-802-2-B5

1.1

2810

6.7

6.2

$555.00

180-MTC-90S-2-B5

1.5

90S

2810

9.0

8.3

$672.00

180-MTC-90L-2-B5

2.2

90L

2810

13.1

12.0

$790.00

180-MTC-100L-2-B5

100L

2830

17.4

15.9

$899.00

180-MTC-711-2-B14

0.37

2780

2.5

2.3

$360.00

180-MTC-712-2-B14

0.55

2790

3.6

3.3

$392.00

180-MTC-801-2-B14

0.75

2800

4.7

4.4

$502.00

180-MTC-802-2-B14

1.1

2810

6.7

6.2

$555.00

180-MTC-90S-2-B14

1.5

90S

2810

9.0

8.3

$672.00

180-MTC-90L-2-B14

2.2

90L

2810

13.1

12.0

$790.00

180-MTC-100L-2-B14

100L

2830

17.4

15.9

$899.00

2 POLE B14

142

150

111

117

142

148

162

174

100

110

117

137

110

117

137

MTC Cap Box B3 Foot Mount

B5 Flange Mount

B14 Flange Mount

MTT Terminal Box

MTTB Brake Motor Length

*Please specify mounting type (B3, B5 or B14) when ordering.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

CMG MTC Series 4 Pole

CMG MTC SERIES - CAPACITOR START, CAPACITOR RUN Part No.

Frame Size

Speed

Full Load Amps 220v

240v

Code

List Price

4 POLE

180-MTC-632-4

0.18

1320

1.5

1.4

$290.00

180-MTC-711-4

0.25

1380

2.0

1.9

$336.00

180-MTC-712-4

0.37

1380

2.9

2.7

$375.00

180-MTC-801-4

0.55

1400

4.0

3.6

$475.00

180-MTC-802-4

0.75

1410

4.9

4.5

$525.00

180-MTC-90S-4

1.1

90S

1410

7.1

6.5

$612.00

180-MTC-90L-4

1.5

90L

1420

9.4

8.7

$720.00

180-MTC-100L1-4

2.2

100L

1430

13.2

12.1

$990.00

180-MTC-100L2-4

100L

1440

17.8

16.3

$1110.00

4 POLE B5

180-MTC-632-4-B5

0.18

1320

1.5

1.4

$310.00

180-MTC-711-4-B5

0.25

1380

2.0

1.9

$360.00

180-MTC-712-4-B5

0.37

1380

2.9

2.7

$394.00

180-MTC-801-4-B5

0.55

1400

4.0

3.6

$505.00

180-MTC-802-4-B5

0.75

1410

4.9

4.5

$565.00

180-MTC-90S-4-B5

1.1

90S

1410

7.1

6.5

$665.00

180-MTC-90L-4-B5

1.5

90L

1420

9.4

8.7

$770.00

180-MTC-100L1-4-B5

2.2

100L

1430

13.2

12.1

$1060.00

180-MTC-100L2-4-B5

100L

1440

17.8

16.3

$1182.00

1.5

1.4

$310.00

4 POLE B14

180-MTC-632-4- B14

0.18

1320

180-MTC-711-4- B14

0.25

1380

2.0

1.9

$360.00

180-MTC-712-4- B14

0.37

1380

2.9

2.7

$394.00

180-MTC-801-4- B14

0.55

1400

4.0

3.6

$505.00

180-MTC-802-4- B14

0.75

1410

4.9

4.5

$565.00

180-MTC-90S-4- B14

1.1

90S

1410

7.1

6.5

$665.00

180-MTC-90L-4- B14

1.5

90L

1420

9.4

8.7

$770.00

Also available as PSC - please contact Argon regarding price & availability.

MTC DIMENSIONS Foot (B3)

Frame

Shaft

B33

Flange (B5)

L33

Flange (B14)

144

174

M16

114

212

111

115

140

3.0

2.5

144

188

M20

104

255

117

130

110

160

3.5

105

2.5

176

222

M20

150

290

142

165

130

200

3.5

100

120

3.0

90S

176

238

M20

150

335

148

165

130

200

3.5

115

140

3.0

90L

176

238

M20

150

365

148

165

130

200

3.5

115

140

3.0

100L

176

262

M20

150

427

162

215

180

250

4.0

130

110

160

3.5

112

193

286

M25

150

453

174

215

180

250

4.0

130

110

160

3.5

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

CMG SLA/HLA Series

CMG SLA/HLA THREE PHASE METRIC FRAME MOTORS The SLA/HLA series are an ideal general purpose three phase motor built in all aluminum frame. Multi-mount feature The standard SLA/HLA motor is supplied with the terminal box top mounted, and has detachable feet. The unique multimount design allows the motor feet to be removed and the motor mounted from any of the eight mounting pads. This feature means that for axial flow fans there is no need for a motor mount in the fan case, which enables quicker assembly times, lower cost, and fewer restrictions to air flow. Alternatively, the MTS & MTT series both allow the feet to be relocated to either side, for a wall mounted motor or side mounted terminal box. Standards and specifications The main dimensions and rated outputs of the SLA series generally conform to International Standards IEC 60034 and IEC 60072, and Australian Standard AS1359. Operating parameters Motor Frame Bearing Size Standard SLA/HLA series motors are designed with the following parameters: 56 6201-2RS n Continuous duty (S1). n Three phase 380-420V, 50Hz power supply. 63 6201-2RS n Ambient temperatures up to 40°C. 71 6202-2RS n Installation at altitudes up to 1000 metres. 80 6204-2RS Performance data is based on these parameters and may need adjustment for different requirements. 90S/L 6205-2RS F class insulation, B class temperature rise 100 6206-2RS SLA/HLA motors have F class insulation and B class temperature rise, ensuring cool running of the motor. 112M 6206-2RS Degree of protection 132S/M 6208-2RS Level of enclosure protection for the SLA/HLA series is IP55 (increased IP ratings available). 160M/L 6309-2RS Shafts are fitted with an oil seal as standard. Pump application A locked drive end bearing is standard on all SLA/HLA flange mounted motors from 90 to 160 frame. This makes it perfect for pump applications where minimal axial shaft movement is critical to provide tight tolerances for impellers. On request CMG can provide a locked bearing option for smaller frame sizes and foot mounted motors. Air movement application Low weight design and the standard drilled and tapped hole in the shaft makes the SLA/HLA series ideally suited for all air movement applications. Efficiency SLA motors exceed requirements of European Eff2. HLA motor efficiency levels comply to the Minimum Efficiency Requirements as per AS/NZS 1359.5:2006 (equivalent to European standard Eff 1). Bearings Bearings fitted are deep groove ball type with double seals and are the same size both ends. Top mounted terminal box The standard position of the terminal box is on top of the motor, allowing for ease of connection to supply. The terminal box is separate from the body of the motor allowing it to be rotated for additional convenience when connecting to supply. Internal connections, voltages and VF drive selection Standard terminal connections for motors 3kW and below is 240V Delta / 415V Star. These motors are suitable for operation with 240V three phase Variable Frequency Drives or 415V DOL starting. Standard terminal connections for motors 4kW and above is 415V Delta / 720V Star. These motors are suitable for operation with 415V three phase Variable Frequency Drives, 415V Star/Delta or 415V DOL starting.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

CMG SLA/HLA Series 2 Pole

CMG SLA/HLA 3 PHASE ALUMINUM Part No.

Frame Size

RPM

Amps 400v Full Load

Efficiency @ % of Full Load

KG (B3)

Code

List Price

n n n

100

2 POLE B3

180-SLA-631-2

0.18

2730

0.53

4.5

$265.00

180-SLA-632-2

0.25

2800

0.66

4.7

$286.00

$292.00

180-SLA-711-2

0.37

2800

0.96

6.0

180-SLA-712-2

0.55

2800

1.40

6.3

$315.00

180-HLA-801-2

0.75

2850

1.5

$465.00

180-HLA-802-2

1.1

2835

2.2

$545.00

180-HLA-90S-2

1.5

90S

2860

2.9

$605.00

180-HLA-90L-2

2.2

90L

2860

4.3

$655.00

180-HLA-100L-2

100L

2890

5.7

$878.00

180-HLA-112M-2

112M

2915

7.1

$1110.00

180-HLA-132S1-2

5.5

132S

2925

9.9

$1450.00

180-HLA-132S2-2

7.5

132S

2920

13.3

$1595.00

180-HLA-160M1-2

160M

2950

19.5

$2400.00

180-HLA-160M2-2

160M

2945

26.4

$2700.00

180-HLA-160L-2

18.5

160L

2935

32.5

$3200.00

180-SLA-631-2-B5

0.18

2730

0.53

4.5

$285.00

180-SLA-632-2-B5

0.25

2800

0.66

4.7

$296.00

380-415V, 50Hz. Three Phase. IP55 protection. Class F Insulation. Aluminum Frame Motor, Endshield/Flanges. Totally enclosed fan cooled. B class Temperature Rise. Multi-Mount Feet.

2 POLE B5

180-SLA-711-2-B5

0.37

2800

0.96

6.0

$315.00

180-SLA-712-2-B5

0.55

2800

1.40

6.3

$336.00

180-HLA-801-2-B5

0.75

2850

1.5

$500.00

180-HLA-802-2-B5

1.1

2835

2.2

$585.00 $639.00

180-HLA-90S-2-B5

1.5

90S

2860

2.9

180-HLA-90L-2-B5

2.2

90L

2860

4.3

$705.00

180-HLA-100L-2-B5

100L

2890

5.7

$930.00

180-HLA-112M-2-B5

112M

2915

7.1

$1180.00

180-HLA-132S1-2-B5

5.5

132S

2925

9.9

$1515.00

180-HLA-132S2-2-B5

7.5

132S

2920

13.3

$1700.00

180-HLA-160M1-2-B5

160M

2950

19.5

$2550.00

160M

2945

26.4

$2900.00

18.5

160L

2935

32.5

$3200.00

180-HLA-160M2-2-B5 180-HLA-160L-2-B5

2 POLE B14

180-SLA-631-2-B14

0.18

2730

0.53

4.5

$285.00

180-SLA-632-2-B14

0.25

2800

0.66

4.7

$296.00

180-SLA-711-2-B14

0.37

2800

0.96

6.0

$315.00

180-SLA-712-2-B14

0.55

2800

1.40

6.3

$336.00

180-HLA-801-2-B14

0.75

2850

1.5

$500.00

180-HLA-802-2-B14

1.1

2835

2.2

$585.00 $639.00

180-HLA-90S-2-B14

1.5

90S

2860

2.9

180-HLA-90L-2-B14

2.2

90L

2860

4.3

$705.00

180-HLA-100L-2-B14

100L

2890

5.7

$930.00

180-HLA-112M-2-B14

112M

2915

7.1

$1180.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

CMG SLA/HLA Series 4 Pole

CMG SLA/HLA 3 PHASE ALUMINUM Part No.

Frame Size

RPM

Amps 400v Full Load

Efficiency @ % of Full Load

KG (B3)

Code

List Price

n n n

100

4 POLE B3

180-SLA-56-4

0.09

1330

0.30

3.6

$240.00

180-SLA-63-4

0.18

1360

0.59

4.7

$282.00

180-SLA-711-4

0.25

1370

0.76

6.0

$315.00

180-SLA-712-4

0.37

1375

1.09

6.3

$318.00

180-SLA-801-4

0.55

1390

1.45

$356.00

180-HLA-802-4

0.75

1410

1.8

$510.00

180-HLA-90S-4

1.1

90S

1425

2.6

$575.00

180-HLA-90L-4

1.5

90L

1430

3.4

$605.00

180-HLA-100L1-4

2.2

100L

1455

4.7

$780.00

180-HLA-100L2-4

100L

1455

6.2

$880.00

180-HLA-112M-4

112M

1455

8.2

$1080.00

180-HLA-132S-4

5.5

132S

1460

10.6

$1440.00

180-HLA-132M-4

7.5

132M

1455

14.3

$1700.00

180-HLA-160M-4

160M

1470

20.7

$2450.00

180-HLA-160L-4

160L

1465

27.6

$2830.00 $260.00

380-415V, 50Hz. Three Phase. IP55 protection. Class F Insulation. Aluminum Frame Motor, Endshield/Flanges. Totally enclosed fan cooled. B class Temperature Rise. Multi-Mount Feet.

4 POLE B5

180-SLA-56-4-B5

0.09

1330

0.30

3.6

180-SLA-63-4-B5

0.18

1360

0.59

4.7

$292.00

180-SLA-711-4-B5

0.25

1370

0.76

6.0

$336.00 $346.00

180-SLA-712-4-B5

0.37

1375

1.09

6.3

180-SLA-801-4-B5

0.55

1390

1.45

$378.00

180-HLA-802-4-B5

0.75

1410

1.8

$552.00

180-HLA-90S-4-B5

1.1

90S

1425

2.6

$617.00

180-HLA-90L-4-B5

1.5

90L

1430

3.4

$638.00

180-HLA-100L1-4-B5

2.2

100L

1455

4.7

$830.00

180-HLA-100L2-4-B5

100L

1455

6.2

$910.00

180-HLA-112M-4-B5

112M

1455

8.2

$1145.00

180-HLA-132S-4-B5

5.5

132S

1460

10.6

$1530.00

180-HLA-132M-4-B5

7.5

132M

1455

14.3

$1740.00

180-HLA-160M-4-B5

160M

1470

20.7

$2850.00

180-HLA-160L-4-B5

160L

1465

27.6

$2985.00 $260.00

4 POLE B14

180-SLA-56-4-B14

0.09

1330

0.30

3.6

180-SLA-63-4-B14

0.18

1360

0.59

4.7

$292.00

180-SLA-711-4-B14

0.25

1370

0.76

6.0

$336.00

180-SLA-712-4-B14

0.37

1375

1.09

6.3

$346.00

180-SLA-801-4-B14

0.55

1390

1.45

$378.00

180-HLA-802-4-B14

0.75

1410

1.8

$552.00

180-HLA-90S-4-B14

1.1

90S

1425

2.6

$617.00

180-HLA-90L-4-B14

1.5

90L

1430

3.4

$638.00

180-HLA-100L1-4-B14

2.2

100L

1455

4.7

$830.00

180-HLA-100L2-4-B14

100L

1455

6.2

$910.00

180-HLA-112M-4-B14

112M

1455

8.2

$1145.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

CMG SLA/HLA Series 6 Pole

CMG SLA/HLA 3 PHASE ALUMINUM Part No.

Frame Size

RPM

Amps 400v Full Load

Efficiency @ % of Full Load

KG (B3)

Code

List Price

n n n

100

6 POLE B3

180-SLA-71-6

0.25

900

0.91

6.3

$350.00

180-SLA-801-6

0.37

915

1.12

$360.00

180-SLA-802-6

0.55

925

1.66

$391.00

180-HLA-90S-6

0.75

90S

940

2.0

$590.00

180-HLA-90L-6

1.1

90L

950

2.8

$630.00

180-HLA-100L-6

1.5

100L

955

3.6

$800.00

180-HLA-112M-6

2.2

112M

960

5.2

$1080.00

180-HLA-132S-6

132S

965

6.6

$1490.00

180-HLA-132M1-6

132M

965

8.8

$1590.00

180-HLA-132M2-6

5.5

132M

965

11.8

$1699.00

180-SLA-160M-6

7.5

160M

975

15.4

$2402.00

180-SLA-160L-6

160L

975

22.7

$2770.00

380-415V, 50Hz. Three Phase. IP55 protection. Class F Insulation. Aluminum Frame Motor, Endshield/Flanges. Totally enclosed fan cooled. B class Temperature Rise. Multi-Mount Feet.

6 POLE B5

180-SLA-71-6

0.25

900

0.91

6.3

$370.00

180-SLA-801-6

0.37

915

1.12

$410.00 $420.00

180-SLA-802-6

0.55

925

1.66

180-HLA-90S-6

0.75

90S

940

2.0

$620.00

180-HLA-90L-6

1.1

90L

950

2.8

$650.00

180-HLA-100L-6

1.5

100L

955

3.6

$855.00

180-HLA-112M-6

2.2

112M

960

5.2

$1135.00

180-HLA-132S-6

132S

965

6.6

$1524.00

180-HLA-132M1-6

132M

965

8.8

$1702.00

180-HLA-132M2-6

5.5

132M

965

11.8

$1820.00

180-SLA-160M-6

7.5

160M

975

15.4

$2545.00

180-SLA-160L-6

160L

975

22.7

$2879.00

6 POLE B14

180-SLA-71-6

0.25

900

0.91

6.3

$370.00

180-SLA-801-6

0.37

915

1.12

$410.00 $420.00

180-SLA-802-6

0.55

925

1.66

180-HLA-90S-6

0.75

90S

940

2.0

$620.00

180-HLA-90L-6

1.1

90L

950

2.8

$650.00

n n

8 Pole (720 RPM) versions also available - please contact Argon regarding price & availability. Upgrade Tropicalization of cooling towers available - please contact Argon regarding price & availability.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

CMG SLA/HLA Series

SLA/HLA DIMENSIONS Foot (B3) Frame

Shaft

112

114

7.2

165

5.8

1xM20

198

100

123

120

100

8.5

186

9.5

1xM20

220

112

137

110

201

1xM20

244

125

157

164

100

125

15.5

217

1xM20

289

90S

140

173

180

100

125

236

2xM20

321

90L

140

173

180

125

150

236

2xM20

347

100L

160

197

203

140

172

M10

100

264

2xM20

400

112

190

227

221

140

180

M10

112

290

2xM25

448

132S

216

262

260

140

186

M12

132

327

2xM25

478

132M

216

262

260

178

224

M12

132

327

2xM25

518

160M

254

304

314

210

260

108

M16

110

160

420

2xM32

605

160L

254

304

314

254

304

108

M16

110

160

420

2xM32

650

SLA/HLA DIMENSIONS

Flange (B5)

Frame 56 63 71 80 90S 90L 100L 112 132S 132M 160M 160L

Flange (B14)

164

215

180

250

4.0

178

215

180

250

4.0

195

265

230

300

4.0

195

265

230

300

4.0

260

300

250

350

5.0

Frame 56 63 71 80 90S 90L 100L 112 132S 132M 160M

109

100

120

3.0

260

300

250

350

5.0

160L

123

115

140

3.0

130

110

160

3.5 3.5

145

165

130

200

146

165

130

200

3.5

146

165

130

200

3.5

HB 109 123 130 145 146 146 164 178 195 195 260

M 65 75 85 100 115 115 130 130 165 165 215

N 50 60 70 80 95 95 110 110 130 130 180

P 80 90 105 120 140 140 160 160 200 200 250

S M5 M5 M6 M6 M8 M8 M8 M8 M10 M10 M12

T 2.5 2.5 2.5 3.0 3.0 3.5 3.5 3.5 3.5 3.5 4.0

260

215

180

250

M12

4.0

Face mount B14A (IM3601) Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Face mount B14B (IM3601)

Motor Motor Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz frame HB M N P S T frame Website www.argondistributors.co.nz 80 - 19 137 100 80 120 M6 3.0 80 - 19

137

130

ELECTRIC MOTORS

CMG HGA Series

HGA SERIES GENERAL PURPOSE THREE PHASE MOTOR BUILT IN ALL CAST IRON FRAME Efficiency HGA motor efficiency levels comply to the Minimum Efficiency Requirements as per AS/NZS 1359.5:2004 (equivalent to European Standard Eff 1). Standards and Specifications The main dimensions and rated outputs of the HGA series generally conform to International Standards IEC 60034 and IEC 60072, and Australian Standard AS1359. Operating Parameters Standard HGA series motors are designed with the following parameters: n Continuous duty (S1). n Three phase 380-420V, 50Hz power supply (upto 3kW: 230V Delta/400V Star, 4kW & above: 400V Delta/690V Star). n Ambient temperatures up to 40°C. n Installation at altitudes up to 1000 metres. Performance data is based on these parameters and may need adjustment for different requirements.

Motor Frame

Bearing Size

6204-2RS

F class insulation, B class temperature rise HGA motors have F class insulation and B class temperature rise, ensuring cool running of the motor.

6205-2RS

100

6206-2RS

112

6306-2RS

Degree of Protection Level of enclosure protection for the HGA series is IP55 (increased IP ratings available).

132

6308-2RS

160

6309-2RS

200

6312

225

6313

250

6314

Bearings Frames 80-180 have deep groove ball type bearings with double seals and are the same size both ends. Larger frames have open type bearing allowing for re-greasing. Terminal Box The standard position of the terminal box for the HGA series is on RHS of the motor looking from the drive end. Motors with top mount terminal boxes may be available on request.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

CMG HGA Series 2 Pole

CMG HGA 3 PHASE CAST IRON MOTORS Part No.

Frame Size

RPM

Amps

400v Full Load

Efficiency @ % of Full Load

100

Kg (B3)

Code

List Price Foot

$525.25

2 POLE

180-HGA-80A-2

0.75

80A

2850

1.5

180-HGA-80B-2

1.1

80B

2835

2.2

$618.75

180-HGA-90S-2

1.5

90S

2860

2.9

$684.75

180-HGA-90L-2

2.2

90L

2860

4.3

$745.25

180-HGA-100L-2

100L

2890

5.7

$1058.75

180-HGA-112M-2

112M

2915

7.1

$1267.75

180-HGA-132S-2

5.5

132SA

2925

9.9

$1647.25

180-HGA-132SA-2

7.5

132SB

2920

13.3

$1834.25

180-HGA-160MA-2

160MA

2950

19.5

121

$2805.00

160M

2945

26.4

129

$3137.75

18.5

160L

2935

32.5

151

$3393.50

180-HGA-160MB-2 180-HGA-160L-2 180-HGA-180M-2

180M

2950

38.6

184

$4213.00

180-HGA-200LA-2

200LA

2970

260

$5486.25

180-HGA-200LB-2

200LB

2965

268

$6055.50

180-HGA-225M-2

225M

2975

332

$8648.75

180-HGA-250M-2

250M

2970

420

$10824.00

2 POLE B5

180-HGA-80A-2-B5

0.75

80A

2850

1.5

$561.00

180-HGA-80B-2-B5

1.1

80B

2835

2.2

$662.75

180-HGA-90S-2-B5

1.5

90S

2860

2.9

$734.25

180-HGA-90L-2-B5

2.2

90L

2860

4.3

$797.50

180-HGA-100L-2-B5

100L

2890

5.7

$1072.50 $1355.75

180-HGA-112M-2-B5

112M

2915

7.1

180-HGA-132SA-2-B5

5.5

132SA

2925

9.9

$1762.75

180-HGA-132SB-2-B5

7.5

132SB

2920

13.3

$1963.50

180-HGA-160MA-2-B5

160MA

2950

19.5

121

$3000.25

180-HGA-160MB-2-B5

160M

2945

26.4

129

$3357.75

18.5

160L

2935

32.5

151

$3630.00

180-HGA-160L-2-B5 180-HGA-180M-2-B5

180M

2950

38.6

184

$4510.00

180-HGA-200LA-2-B5

200LA

2970

260

$5871.25

180-HGA-200LB-2-B5

200LB

2965

268

$6479.00

180-HGA-225M-2-B5

225M

2975

332

$9253.75

180-HGA-250M-2-B5

250M

2970

420

$11583.00

2 POLE B14

180-HGA-80A-2-B14

0.75

80A

2850

1.5

$561.00

180-HGA-80B-2-B14

1.1

80B

2835

2.2

$662.75

180-HGA-90S-2-B14

1.5

90S

2860

2.9

$734.25

180-HGA-90L-2-B14

2.2

90L

2860

4.3

$797.50

180-HGA-100L-2-B14

100L

2890

5.7

$1072.50

180-HGA-112M-2-B14

112M

2915

7.1

$1355.75

* Models with flanges have B5 or B14 as code suffix. .

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

CMG HGA Series 4 Pole

CMG HGA 3 PHASE CAST IRON MOTORS Part No.

Frame Size

RPM

Amps

400v Full Load

Efficiency @ % of Full Load

100

Kg (B3)

Code

List Price Foot

$583.00

4 POLE

180-HGA-80B-4

0.75

80B

1410

1.85

180-HGA-90S-4

1.1

90S

1425

2.6

$657.25

180-HGA-90L-4

1.5

90L

1430

3.4

$684.75

180-HGA-100LA-4

2.2

100LA

1455

4.7

$893.75

180-HGA-100LB-4

100LB

1455

6.2

$1003.75

180-HGA-112M-4

112M

1455

8.2

$1234.75

180-HGA-132S-4

5.5

132S

1460

10.6

$1647.25

180-HGA-132M-4

7.5

132M

1460

14.3

$1883.75

180-HGA-160M-4

160M

1470

20.7

127

$2862.75

180-HGA-160L-4

160L

1465

27.6

148

$3289.00

180-HGA-180M-4

18.5

180M

1465

32.8

186

$4078.25

180-HGA-180L-4

180L

1470

38.0

194

$4402.75

180-HGA-200L-4

200L

1475

53.0

260

$5656.75

180-HGA-225S-4

225S

1480

64.0

310

$7375.50

180-HGA-225M-4

225M

1480

79.0

335

$8296.75

4 POLE B5

180-HGA-80B-4-B5

0.75

80B

1410

1.85

$624.25

180-HGA-90S-4-B5

1.1

90S

1425

2.6

$704.00

180-HGA-90L-4-B5

1.5

90L

1430

3.4

$734.25

180-HGA-100LA-4-B5

2.2

100LA

1455

4.7

$957.00

180-HGA-100LB-4-B5

100LB

1455

6.2

$1072.50 $1320.00

180-HGA-112M-4-B5

112M

1455

8.2

180-HGA-132S-4-B5

5.5

132S

1460

10.6

$1762.75

180-HGA-132M-4-B5

7.5

132M

1460

14.3

$2015.75

180-HGA-160M-4-B5

160M

1470

20.7

127

$3063.50

180-HGA-160L-4-B5

160L

1465

27.6

148

$3520.00 $4361.50

180-HGA-180M-4-B5

18.5

180M

1465

32.8

186

180-HGA-180L-4-B5

180L

1470

38.0

194

$4710.75

180-HGA-200L-4-B5

200L

1475

53.0

260

$6052.75

180-HGA-225S-4-B5

225S

1480

64.0

310

$7889.75

180-HGA-225M-4-B5

225M

1480

79.0

335

$8877.00

180-HGA-80B-4-B14

0.75

80B

1410

1.85

$624.25

180-HGA-90S-4-B14

1.1

90S

1425

2.6

$704.00

180-HGA-90L-4-B14

1.5

90L

1430

3.4

$734.25

180-HGA-100LA-4-B14

2.2

100LA

1455

4.7

$957.00

180-HGA-100LB-4-B14

100LB

1455

6.2

$1072.50

180-HGA-112M-4-B14

112M

1455

8.2

$1320.00

4 POLE B14

* Models with flanges have B5 or B14 as code suffix.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

CMG HGA Series 6 Pole

CMG HGA 3 PHASE CAST IRON MOTORS Part No.

Frame Size

RPM

Amps

400v Full Load

Efficiency @ % of Full Load

100

Kg (B3)

Code

List Price Foot

6 POLE

180-HGA-90S-4

0.75

90S

940

2.0

$657.25

180-HGA-90L-6 180-HGA-100L-6

1.1

90L

950

2.8

$684.75

1.5

100L

955

3.6

$915.75

180-HGA-112M-6

2.2

112M

960

5.2

$1218.25

180-HGA-132S-6

132S

965

6.6

$1647.25

180-HGA-132MA-6

132MA

965

8.8

$1834.25

180-HGA-132MB-6

5.5

132MB

965

11.8

$1960.75

180-HGA-160M-6

7.5

160M

975

15.4

138

$2805.00

180-HGA-160L-6

160L

975

22.7

151

$3264.25

180L

980

29.8

199

$4320.25

180-HGA-200LA-6

180-HGA-180L-6

18.5

200LA

980

35.0

252

$5230.50

180-HGA-200LB-6

200LB

985

42.5

265

$5755.75

$704.00

6 POLE B5

180-HGA-90S-4-B5

0.75

90S

940

2.0

180-HGA-90L-6-B5 180-HGA-100L-6-B5

1.1

90L

950

2.8

$734.25

1.5

100L

955

3.6

$979.00 $1303.50

180-HGA-112M-6-B5

2.2

112M

960

5.2

180-HGA-132S-6-B5

132S

965

6.6

$1762.75

180-HGA-132MA-6-B5

132MA

965

8.8

$1963.50

180-HGA-132MB-6-B5

5.5

132MB

965

11.8

$2098.25

180-HGA-160M-6-B5

7.5

160M

975

15.4

138

$3000.25

180-HGA-160L-6-B5

160L

975

22.7

151

$3495.25

180-HGA-180L-6-B5

180L

980

29.8

199

$4620.00

180-HGA-200LA-6-B5

18.5

200LA

980

35.0

252

$5599.00

180-HGA-200LB-6-B5

200LB

985

42.5

265

$6157.25

6 POLE B14

180-HGA-90S-4-B14

0.75

90S

940

2.0

$704.00

180-HGA-90L-6-B14

1.1

90L

950

2.8

$734.25

180-HGA-100L-6-B14

1.5

100L

955

3.6

$979.00

180-HGA-112M-6-B14

2.2

112M

960

5.2

$1303.50

180-HGA-132S-6-B14

132S

965

6.6

$1762.75

180-HGA-132MA-6-B14

132MA

965

8.8

$1963.50

* Models with flanges have B5 or B14 as code suffix. n 8 Pole (720rpm) versions also available, please inquire regarding price & availability n Upgrade Tropicalization of cooling towers available - please contact Argon regarding price & availability.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

CMG HGA Series

HGA DIMENSIONS Foot (B3)

Frame

Shaft

125

160

172

165

100

150

15.5

170

M20

305

90S

140

176

185

170

100

155

190

M20

330

90L

140

176

185

170

125

185

190

M20

365

100L

160

200

210

185

140

215

M10

100

245

M20

410

112M

190

245

230

190

140

225

M10

112

265

M25

445

132S

216

275

260

215

140

200

M12

132

315

M25

475

132M

216

275

260

215

178

238

M12

132

315

M25

515

160M

254

325

255

210

270

108

M16

110

160

375

M32

600

160L

254

325

255

254

314

108

M16

110

160

375

M32

645

180M

279

356

360

270

241

311

121

M16

110

42.5

180

410

M40

670

180L

279

356

360

270

279

349

121

M16

110

42.5

180

410

M40

710

200L

318

395

400

310

305

375

133

M20

110

200

460

M50

775

Foot mount B3 (IM1001)

HGA DIMENSIONS

HGA DIMENSIONS Flange B5

Flange B14A

Frame

165

130

200

3.5

100

120

3.0

90S

170

100

165

130

200

3.5

115

140

3.0

90L

170

100

165

130

200

3.5

100

130

110

160

3.5

100L

185

145

215

180

250

4.0

112

130

110

160

3.5

112

190

153

215

180

250

4.0

132

165

130

200

M10

3.5

132S

215

183

265

230

300

4.0

160

215

180

250

M12

4.0

132M

215

183

265

230

300

4.0

160M

255

215

300

250

350

5.0

160L

255

215

300

250

350

5.0

180M

270

230

300

250

350

5.0

180L

270

230

300

250

350

5.0

200L

310

260

350

300

400

5.0

Large ﬂange mount B5 (IM3001)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Small ﬂange (face) mount B14 (IM3601)

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ELECTRIC MOTORS

Notes

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MOTOR SPEED CONTROL

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MOTOR SPEED CONTROL

Index

1 65

SPEED CONTROL

Compact series VFD

General purpose IP20 VFD

General purpose IP66 VFD

Motor Mount

Starters

CONVEYORS

Speed Controllers

CENTRIFUGES

MIXERS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Forced Fan Cowls

Parker AC10

FANS

PACKAGING MACHINES 64

Ziehl Speed Controllers

TEXTILE MACHINES

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MOTOR SPEED CONTROL

MARATHON MD100C

COMPACT SERIES

n ■ Sensorless n ■ Easy

vector & V/Hz control

fan maintenance

n ■ Built-in

Modbus RTU

n ■ Built-in

Rotary Potentiometer

- Selectable PNP/NPN digital inputs

- DC injection braking

n ■ Built-in n ■ HD

operation: 10-50oC

n ■ IP20

EMC filter

compact design

- Available from 0.1 - 2.2kw single phase - Available from 0.4 - 7.5kW three phase

n ■ CE

& C-Tick approval

n ■ Ideal

for OEM's and can fit anywhere

n ■ Rated

Marathon Variable Speed Drives

for constant torque

MD100C - COMPACT SERIES VARIABLE SPEED DRIVE - 100C COMPACT SERIES 230V Part No.

Input Volt

Output Current (230v 3 Ph)

Code

List Price

351-MD0001-100C1

0.1

230

0.8

$630.00

351-MD0002-100C1

0.2

230

1.4

$640.00

351-MD0004-100C1

0.4

230

2.5

$690.00

351-MD0075-100C1

0.75

230

$750.00

351-MD0015-100C1

1.5

230

$770.00

351-MD0022-100C1

2.2

230

$890.00

Simplicity, precision, flexibility, standardisation, easy to use, diversity are just some of the inherent qualities of our NEW Marathon Variable Frequency Drives. This NEW range of variable speed drives, offers the latest in technology and efficiency. With features like customised keypad/controller for the HVAC industry, space efficient designs and sensorless control functions, there’s sure to be a drive to suit your needs.

MD100C - COMPACT SERIES VARIABLE SPEED DRIVE - 100C COMPACT SERIES 400V Part No.

Input Volt

Output Current (400v 3 Ph)

Code

List Price

351-MD0004-100C4F

0.4

400

1.25

$940.00

351-MD0008-100C4F

0.8

400

2.5

$950.00

351-MD0015-100C4F

1.5

400

4.0

$1040.00

351-MD0022-100C4F

2.2

400

5.5

$1060.00

351-MD0040-100C4F

3.7

400

8.0

$1210.00

351-MD0055-100C4F

5.5

400

12.0

$1690.00

351-MD0075-100C4F

7.5

400

16.0

$1790.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MOTOR SPEED CONTROL

MARATHON MD100G IP20

GENERAL PURPOSE IP20 SERIES

n ■ Selectable

V/f, sensorless vector control EMC filter n ■ Side by side installation n ■ Enhanced size competitiveness n ■ PLC function (simple sequence operation) n ■ Compliance with open field networks - Profibus-DP, CANopen, EtherNet n IP20/21 enclosure (0.4 - 75kW) n ■ PM sensorless control n ■ P2P I/O share function n ■ Capacitor/fan life cycle management function n ■ Smart copier option (able to copy parameter and download drive main OS) n ■ IP20 with built-in mains isolator switch n ■ Built-in

product may differ from image shown

MD100G - GENERAL PURPOSE SERIES VARIABLE SPEED DRIVE - 100G GP SERIES IP20 230V Part No.

Input Volt

Output Current (230v 3 Ph)

Code

List Price

351-MD0004-100G1FO

0.4

230

1.3

$1030.00

351-MD0008-100G1FO

0.75

230

2.5

$1220.00

351-MD0015-100G1FO

1.5

230

4.0

$1320.00

351-MD0022-100G1FO

2.2

230

5.5

$1590.00

MD100G - GENERAL PURPOSE SERIES VARIABLE SPEED DRIVE - 100G GP SERIES IP20 415V Part No.

Input Volt

Output Current (400v 3 Ph)

Code

List Price

351-MD0004-100G4FO

0.4

400

1.3

$1110.00

351-MD0075-100G4FO

0.75

400

2.5

$1170.00

351-MD0015-100G4FO

1.5

400

4.0

$1280.00

351-MD0022-100G4FO

2.2

400

5.5

$1460.00

351-MD0037-100G4FO

3.7

400

$1740.00

351-MD0040-100G4FO

400

$1740.00

351-MD0055-100G4FO

5.5

400

$2150.00

351-MD0075-100G4FO

7.5

400

$2340.00

351-MD0110-100G4FO

400

$3450.00

351-MD0150-100G4FO

400

$4190.00

351-MD0185-100G4FO

18.5

400

$4490.00

351-MD0220-100G4FO

400

$4700.00

351-MD0300-100G4FO

400

$8280.00

351-MD0370-100G4FO

400

$9680.00

351-MD0450-100G4FO

400

$11330.00

351-MD0550-100G4FO

400

110

$12740.00

351-MD0750-100G4FO

400

152

$13860.00

Marathon Variable Speed Drives Simplicity, precision, flexibility, standardisation, easy to use, diversity are just some of the inherent qualities of our NEW Marathon Variable Frequency Drives. This NEW range of variable speed drives, offers the latest in technology and efficiency. With features like customised keypad/controller for the HVAC industry, space efficient designs and sensorless control functions, there’s sure to be a drive to suit your needs.

Contact Argon Distributors for specific application help.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MOTOR SPEED CONTROL

MARATHON MD100G IP66

GENERAL PURPOSE IP66 SERIES

n ■ Selectable

V/f, sensorless vector control EMC filter n ■ Side by side installation n ■ Enhanced size competitiveness n ■ PLC function (simple sequence operation) n ■ Compliance with open field networks - Profibus-DP, CANopen, EtherNet n IP66 enclosure (0.4 - 22kW) n ■ PM sensorless control n ■ P2P I/O share function n ■ Capacitor/fan life cycle management function n ■ Smart copier option (able to copy parameter and download drive main OS) n ■ IP66 with built-in mains isolator switch n ■ Built-in

product may differ from image shown

MD100G - GENERAL PURPOSE SERIES VARIABLE SPEED DRIVE - 100G GP IP66 SERIES IP66 400V Part No.

Input Volt

Output Current (400v 3 Ph)

Code

List Price

351-MD0004-100G4FX

0.4

400

1.3

$1540.00

351-MD0075-100G4FX

0.75

400

2.5

$1570.00

351-MD0015-100G4FX

1.5

400

4.0

$1680.00

351-MD0022-100G4FX

2.2

400

5.5

$2040.00

351-MD0040-100G4FX

400

$3240.00

351-MD0055-100G4FX

5.5

400

$3510.00

351-MD0075-100G4FX

7.5

400

$3830.00

351-MD0110-100G4FX

400

$5500.00

351-MD0150-100G4FX

400

$5980.00

351-MD0185-100G4FX

18.5

400

$6730.00

351-MD0220-100G4FX

400

$7310.00

Contact Argon Distributors for specific application help.

Application HVAC industry Automation industry Water industry Mining industry Food and beverage industry Pulp & paper industry Oil & gas industry Metal & steel industry Chemical & petrochemical industry Pharmaceutical industry

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MOTOR SPEED CONTROL

Also available

Variable Speed Drive - AC10 Series Description: The AC10 Compact Drive is a simple, reliable and economical solution to every-day motor control applications requiring speed or torque control within the power range of 0.2 kW to 180 kW for IP20 and 0.4 kW to 15 kW for IP66. Having compact dimensions and features normally only associated with higher specification drives, including, sensorless vector mode for control of Permanent Magnet (PMAC) and AC induction motors, output frequency up to 590 Hz, 3 phase 400 V supplies in all 11 frame sizes and a full 150 % overload at 0.5 Hz for 1 minute, AC10 provides an optimised solution for OEM machine builders looking for a compact, cost-effective drive without compromising on performance.

TECHNICAL CHARACTERISTICS IP20

Input Frequency

220 ... 240 VAC±15 % Single Phase 220 ... 240 VAC±15 % Three Phase 380 ... 480 VAC +10%-15% Three Phase 50/60 Hz

Power Range

0.2...180 kW

Power Supply

Operating Temperature 0...400C

Features: Simplicity AC10 is designed to reduce the time and effort required to install, setup and commission through its easy to use integrated keypad. Minimal wiring requirements and two easily accessed terminal rails make AC10 fast and simple to install, having you up and running in no time at all. Auto-tuning sensorless vector mode takes AC10 beyond simple V/Hz control allowing users requiring greater dynamic speed or torque control for their application to benefit from the drives enhanced 0.5 % speed and 5 % torque accuracy. Reliability Proven technology and manufacturing techniques ensure AC10 has been engineered and built to deliver consistently outstanding levels of performance day in, day out ensuring maximum uptime and productivity. Thanks to its conformally coated PCBs, AC10 is able to withstand even the most arduous class 3C3 environment which many other drives in this class would struggle with, allowing you to operate AC10 with the utmost confidence in more applications.

Analogue Inputs

1x(0-10V), 1x(0-10V, 0-5V, 0-20mA, 4-20mA)

Analogue Outputs

1x(0-10V, 0-20 mA) frames 1-5 1x2x(0-10V, 0-2- mA) frames 6-11

Digital Intputs

5x24 VDC frames 1-5 8x24 VDC frames 6-11

Digital Outputs

1x24 VDC frames 1-5 2x24 VDC frames 6-11

Relay Output

1x5 A @230 VAC

TECHNICAL CHARACTERISTICS IP66

Input Frequency

220 ... 240 VAC±15 % Single Phase 220 ... 240 VAC±15 % Three Phase 380 ... 480 VAC +10%-15% Three Phase 50/60 Hz

Power Range

0.4...15 kW

Power Supply

Operating Temperature 0...500C

Please contact Argon for price & availability

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Analogue Inputs

1x(0-10V), 1x(0-10V, 0-5V, 0-20mA, 4-20mA)

Analogue Outputs

1x(0-10V, 0-20 mA)

Digital Intputs

6x24 VDC

Digital Outputs

1x24 VDC

Relay Output

1x5 A @230 VAC

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DOL Starters, Motor Mounts, Forced Fan Cowls

MOTOR SPEED CONTROL

DOL MOTOR STARTERS Model No.

Amp Range

Volts

Code

List Price

Overload Only Part No.

List Price

350-M35N-708

1.8-2.6

0.75

400

$155.00

311-LR2-K0308

$85.00

350-M35N-710

2.6-3.7

1.5

400

$155.00

311-LR2-K0310

$85.00

350-M35N-712

3.7-5.5

2.2

400

$155.00

311-LR2-K0312

$85.00

350-M35N-714

5.5-8

400

$165.00

311-LR2-K0314

$85.00

350-M35N-716

8-11.5

400

$165.00

311-LR2-K0316

$85.00

350-M35N-721

10-14

5.5

400

$175.00

311-LR2-K0321

$85.00

350-M35N-722

12-16

7.5

400

$175.00

311-LR2-K0322

$98.00

350-M35U-714

5.5-8.0A

0.75

230

$155.00

311-LR2-K0314

$85.00

350-M35U-716

8-11.5

1.1

230

$155.00

311-LR2-K0316

$85.00

350-M35U-721

10-14

1.8

230

$155.00

311-LR2-K0321

$85.00

350-M35U-722

12-16

2.2

230

$155.00

311-LR2-K0322

$98.00

IP65 polycarbonate enclosure. M35 starters all come complete with overload. n Mechanical “on” Latch included. n

RAPID FIT MOTOR MOUNTS Model No.

To Fit Frame Size

Code

List Price

350-MM270

63-100

$180.00

350-MM340

90-132

$260.00

350-MM430

90-160

$290.00

The fastest and most economical method of mounting motors Rapid adjustments. n Five sizes cover 63-180 frame sizes. (3 sizes only stocked). n Prevents vibration and noise. n Maintains motor alignment. n

FAN FORCED COWL KIT Model No.

To Fit Motor Frame

Length (mm)

Diameter (mm)

Fan Watts

Volts 50hz

M3/h

Code

Price

350-SC-FF-71A

120

136

230

300

$425.00

350-SC-FF-80A

135

155

230

350

$455.00

350-SC-FF-90A

140

175

230

500

$475.00

350-SC-FF-100A

100

140

193

230

650

$595.00

350-SC-FF-112A

112

140

217

400

$670.00

350-SC-FF-132A

132

153

258

400

$770.00

350-SC-FF-160A

160

195

314

400

$840.00

350-SC-FF-180A

180

215

352

400

POA

350-SC-FF-200A

200

245

393

400

POA

350-SC-FF-225

225

270

443

400

POA

230V models G63A-G100A can be powered by the 230V relay output on most speed drives. Available up to 450 frame (250, 280, 315, 355, 450). n Alternative ERM Fans available. Refer ERM Fans Page 75. n

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MOTOR SPEED CONTROL

Speed Controllers

SOLID STATE FAN – SPEED CONTROLLER The MSC1200 controller provides stepless electronic speed control for single phase motors in fan and pump application. Speed may be adjusted between an adjustable minimum and maximum motor speed. Model

Type

Code

List Price

350-VA500 - Single Phase - Max 2amp - CW Plate & SW

$95.00

350-MSC1200B - Single Phase - Max 5amp

$185.00

350-MSR2000 - Single Phase - Max 8amp

POA A

SPECIFICATION - MS SERIES Rating

240Volt, 50/60Hz, up to 30°C in free air. Derate at 30VA per °C above 30o. Maximum controller case temperature 70°C.

Minimum Speed Setting

Screwdriver adjustment over a wide range of motor speed.

Mounting

MSC1200 -10mm diameter aluminium bush for panel mounting. Alternatively, refer to MSC1200-WP for mounting on HPM switch plate with switch mechanism. MSR2000 - Two mounting holes.

Connections

MSC1200 - Two 130mm leads,24/020 250 Volt V105 PVC MSR2000 - Internal 8/9 way terminal strip.

Shaft

MSC1200 - 6mm plastic, 12mm beyond bush.

Radio Frequency

All Power form controllers are fitted with radio frequency.

Suppression

Suppression networks. Conforms to AS/NZS1044:1995.

Reliability

Designed and manufactured in Australia using high quality components, Power form controllers are built for long service life.

APPLICATIONS Stepless speed control of most permanent split capacitor, shaded pole and universal motors. Often used to control the speed of centrifugal and axial flow fans and blowers. earth screen

C ONN E C T IO N DIA G RA M F OR P OWE R / SPEE D C ONT R OLLER Model MS C 1200

sc reened cable

Powerform 3 May 06 - PM

MSC1200

Bro wn Red White

MOTOR

Aux

Earth

Active

240

Com

main

Com

main

If white cable i s not us ed it MUST be in s ulated

R es ist ive or Transformer

Motor - 3 wire

Motor - 2 wire

Active & Neutral ma y s wapped around

Neutral

Option RC10 remote control

Earth

240 VAC

Ear th

Neutral

Motor - 2 wire

Motor - 3 wire Rc1 Rc2 Switch

~L MSR / VA controller

lamp

~Lc

Resis tive

Screen cable

Mm Com

main

Com

main

MOTOR

Mm OPTION 2 speed switch

Ac tive

1M resistor used for limiter only

White Brown

Aux

Earth

Mc Mc

Mc Mains Input Connections may be reversed to ~L and ~Lc. On/Off switch must always be in the active line only.

WIRING DIAGRAM Ensure that the motor to be controlled is suitable for speed control. For some PSC motors, the controller must be installed to regulate voltage to the main winding only, and not to the capacitor winding. To do otherwise could cause motor damage.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MOTOR SPEED CONTROL

Ziehl Speed Controllers

ZIEHL TRANSFORMER BASED CONTROLLERS 1~WITH 5 STEP-SWITCH 230V Model No.

Rated Current Amps

Rated Temp˚

1.5 2

R-E-1.5G R-E-2G R-E-3.5G R-E-6G

Max line Fuse Amps

Max Heat dissipation

Max Ambient Temp˚

Protection

Code

Price

IP54

$240.00

IP54

$305.00

3.5

IP54

$330.00

IP54

$370.00

7.5

IP54

$430.00

R-E-9G

IP54

$685.00

R-E-12

IP21

$785.00

R-E-14G

105

IP54

$895.00

Price

R-E-7.5G

ZIEHL TRANSFORMER BASED CONTROLLERS 3~WITH 5 STEP-SWITCH 400V Model No.

Rated Current Amps

Rated Temp˚

Max line Fuse Amps

Max Heat dissipation

Max Ambient Temp˚

Protection

Code

R-D-1G

IP54

$605.00

R-D-2G

IP54

$660.00

R-D-3G

IP54

$785.00

R-D-4

IP21

$800.00

5.2

IP54

$1025.00

R-D-7

110

IP21

$1125.00

R-D-14

145

IP54

$1665.00

R-D-5.2G

RD series

RE series

Conne ction diagram

Connections / equipment see connection d

R-D-.. .

R-E-... L

ontaktbelastun Kg ctrgtin contaa

230VAC max. 1 A

230VAC max. 1A PE

PE SR170K01 15.06.2004

3 L2

Netz/line 3~400V 50/60Hz

Y Lor D

M 3~

PE N L1 Netz/line 1~230V 50/60 Hz PE

3~Mo tor ohne Thermokontak te without thermocon actst

SR148K01 21.06.2004

1~ Mo tor ohne Thermok ontakt e without thermocont acts

Line 3~ Motor without thermostats Contact rating

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

U1 M 1~

K ontaktbelastung ctrgtin contaa

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MOTOR SPEED CONTROL

Notes

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Index

AUTHORISED NATIONAL DISTRIBUTORS FOR

What’s New!

Wide range of EBM papst products

Ziehl-Abegg Fans

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Aluminium Axial Impellers

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Index

FANS FANS & & BLOWERS BLOWERS Hascon custom impellers

Aluminium Fan Blades

Hot Air Circulation Fans

EBM DC Compact Axials

126

102

Inline Axial Fans

150

151

Roof Supply/Extract Fan

Belt Drive Blowers

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Air Blowers

EBM Centrifugal Modules

148

AC Type Blower Units

Square Plate Axials Fans

140

137

Backward Curved Fans

EBM Compact Axials

115

Basket Grill Axial Fans

130

146

EBM Papst Axial Fans

Compact Fan Accessories

Inline Fans

Mosswyn Compact Axials

Blower wheels

Mosswyn DC Compact Axials

Multiwing Fan Blades

DCI Series Case Fans

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Hascon HF Series Impellers

FANS & BLOWERS

HASCON HF 4&8 BLADE SERIES IMPELLER – FIXED PITCH PPG -20 - +85 Kitset Code

Air Flow Direction1

Blade Type2

Minimum Diameter

Maximum Diameter

Hub Type

Blade No.

Bore Size

Code

List Price

320-HF8412LS

C/D

200mm

690mm

(1/2”)

$151.00

320-HF8414LS

C/D

200mm

690mm

14mm

$151.00

320-HF8812LS

C/D

200mm

690mm

(1/2”)

$182.00

320-HF8814LS

C/D

200mm

690mm

14mm

$182.00

HASCON HF 4&8 BLADE SERIES IMPELLER – FIXED PITCH PAG -40 - +120 320-HF8412LS-PAG

C/D

230mm

690mm

(1/2”)

$185.00

320-HF8414LS-PAG

C/D

230mm

690mm

14mm

$185.00

320-HF8812LS-PAG

C/D

230mm

690mm

(1/2”)

$227.00

320-HF8814LS-PAG

C/D

230mm

690mm

14mm

$227.00

Custom bore sizes available.

HASCON HF 10 BLADE SERIES IMPELLER – FIXED PITCH PPG -20 - +85 Kitset Code

Air Flow Direction1

Blade Type2

Minimum Diameter

Maximum Diameter

Hub Type

Blade No.

Taper lock

Code

List Price

320-HF1005TLLS

C/D

300mm

730mm

1610

$273.00

320-HF1005TLLD

A/B

300mm

730mm

1610

$273.00

320-HF1010TLLS

C/D

300mm

730mm

1610

$273.00

320-HF1010TLLD

A/B

300mm

730mm

1610

$273.00

HASCON HF 10 BLADE SERIES IMPELLER – FIXED PITCH PAG -40 - +120 320-HF1005TLLS-PAG

C/D

300mm

730mm

1610

$299.00

320-HF1005TLLD-PAG

A/B

300mm

730mm

1610

$299.00

320-HF1010TLLS-PAG

C/D

300mm

730mm

1610

$299.00

320-HF1010TLLD-PAG

A/B

300mm

730mm

1610

$299.00

n n ■ ■ ■ ■

Confirm Motor kW, RPM, Shaft Diameter. Confirm Fan Diameter and Air Flow Direction from below diagram. LS- Left hand, (form C or D) LD - Right Hand (form A or B) For A or B air flow direction replace “S” with “D”. Orange = PPG, White = PAG material. 1610 Taper Bush Lock sold separatelly. See next page for chart.

■

We use dedicated software to pitch and trim these impellers. Please contact us with your application.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Hascon HV Series Impellers

FANS & BLOWERS

HASCON 5 BLADE IMPELLER – STANDARD BLADE PPG -20 - +85 Kitset Code

Air Flow Direction1

Blade Type2

Minimum Diameter

Maximum Diameter

Hub Type

Blade No.

Bore Size

Code

List Price

320-HV5514MS

C/D

350

780

$244.00

320-HV55BLMS

C/D

350

780

custom

$259.00

320-HV5514MD

A/B

350

780

$244.00

320-HV55BLMD

A/B

350

780

custom

$259.00

HASCON 5 BLADE IMPELLER – STANDARD BLADE PAG -40 - +120 Kitset Code

Air Flow Direction1

Blade Type2

Minimum Diameter

Maximum Diameter

Hub Type

Blade No.

Bore Size

Code

List Price

320-HV5514MS-PAG

C/D

350

780

$269.00

320-HV55BLMS-PAG

C/D

350

780

custom

$284.00

320-HV5514MD-PAG

A/B

350

780

$269.00

320-HV5514MD-PAG

A/B

350

780

custom

$284.00

■ ■ ■ ■ ■ ■

Refer air flow direction diagrams on previous page. MS- Left hand, MD- Right Hand. Pilot bore- approx. 13mm. Fixed bore only. Custom bore sizes from 10mm - 24mm available. Orange = PPG, White = PAG material.

HASCON 9 BLADE IMPELLER – STANDARD BLADE PPG -20 - +85 Kitset Code

Air Flow Direction1

Blade Type2

Minimum Diameter

Maximum Diameter

Hub Type

Blade No.

Taper lock

Code

List Price

320-HV99TLMS

C/D

450

830

1610

$350.00

320-HV99TLMD

A/B

450

830

1610

$350.00

HASCON 9 BLADE IMPELLER – STANDARD BLADE PAG -40 - +120 Kitset Code

Air Flow Direction1

Blade Type2

Minimum Diameter

Maximum Diameter

Hub Type

Blade No.

Taper lock

Code

List Price

320-HV99TLMSPAG

C/D

450

830

1610

$395.00

320-HV99TLMDPAG

A/B

450

830

1610

$395.00

Hub Type

Blade No.

HASCON 9 BLADE IMPELLER – BIG BLADE PPG -20 - +85 Kitset Code

Air Flow Direction1

Blade Type2

Minimum Diameter

Maximum Diameter

Taper lock

Code

List Price

320-HV99TLBS

C/D

450

1090

1610

$440.00

320-HV99TLBD

A/B

450

1090

1610

$440.00

HASCON 9 BLADE IMPELLER – BIG BLADE PAG -40 - +120 Kitset Code

Air Flow Direction1

Blade Type2

Minimum Diameter

Maximum Diameter

Hub Type

Blade No.

Taper lock

Code

List Price

320-HV99TLBSPAG

C/D

450

1090

1610

$495.00

320-HV99TLBDPAG

A/B

450

1090

1610

$495.00

Confirm Motor kW, RPM, Shaft Diameter. Confirm Fan Diameter and Air Flow Direction from diagram on previous page. MS/BS- Left hand, MD/BD- Right Hand. 1610 Taper Bush Lock sold separatelly. See next page for chart. ■ We use dedicated software to pitch and trim these impellers. Please contact us with your application.

n n ■ ■

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Hascon HV Series Impellers

FANS & BLOWERS

HASCON 12 BLADE IMPELLER – STANDARD BLADE PPG -20 - +85 Kitset Code

Air Flow Direction1

Blade Type2

Minimum Diameter

Maximum Diameter

Hub Type

Blade No.

Taper lock

Code

List Price

320-HV1212TLMS

C/D

500

910

1610

$454.00

320-HV1212TLMD

C/D

500

910

1610

$454.00

HASCON 12 BLADE IMPELLER – STANDARD BLADE PAG -40 - +120 320-HV1212TLMS-PAG

C/D

500

910

1610

$515.00

320-HV1212TLMD-PAG

C/D

500

910

1610

$515.00

HASCON 12 BLADE IMPELLER – BIG BLADE PPG -20 - +85 Kitset Code

Air Flow Direction1

Blade Type2

Minimum Diameter

Maximum Diameter

Hub Type

Blade No.

Taper lock

Code

List Price

320-HV1212TLBS

A/B

500

910

1610

$575.00

320-HV1212TLBD

A/B

500

910

1610

$575.00

HASCON 12 BLADE IMPELLER – BIG BLADE PAG -40 - +120 320-HV1212TLBS-PAG

A/B

500

910

1610

$685.00

320-HV1212TLBD-PAG

A/B

500

910

1610

$685.00

Hub Type

Blade No.

Code

List Price

HASCON 16 BLADE IMPELLER – STANDARD BLADE PPG -20 - +85 Kitset Code

Air Flow Direction1

Blade Type2

Minimum Diameter

Maximum Diameter

Taper lock

320-HV1616TLMS

C/D

670

1170

1610

$580.00

320-HV1616TLMD

C/D

670

1170

1610

$580.00

HASCON 16 BLADE IMPELLER – STANDARD BLADE PAG 320-HV1616TLMS-PAG

C/D

670

1170

1610

$833.00

320-HV1616TLMD-PAG

C/D

670

1170

1610

$833.00

HASCON 16 BLADE IMPELLER – BIG BLADE PPG -20 - +85 Kitset Code

Air Flow Direction1

Blade Type2

Minimum Diameter

Maximum Diameter

Hub Type

Blade No.

Taper lock

Code

List Price

320-HV1616TLBS

C/D

670

1270

1610

$740.00

320-HV1616TLBD

A/B

670

1270

1610

$740.00

HASCON 16 BLADE IMPELLER – STANDARD BLADE PAG -40 - +120 320-HV1616TLBS-PAG

C/D

670

1270

1610

$993.00

320-HV1616TLBD-PAG

A/B

670

1270

1610

$993.00

n n ■ ■ ■

Confirm Motor kW, RPM, Shaft Diameter. Confirm Fan Diameter and Air Flow Direction from diagram on previous page. MS/BS- Left hand, MD/BD- Right Hand. 1610 Taper Bush Lock sold separatelly. See below for chart. Orange = PPG, White = PAG material.

(Please contact us with your duty point or parameters and we can advise correct pitch angle.) TAPER BUSH Part No.

314-TLB1610

Series

Available Sizes (mm)

Available Sizes (inch)

Code

List Price

1610

from 14mm to 42mm

from 1/2” to 1 5/8”

$28.20

Taper lock bushes are available in 1108, 1210 or 1610 series with metric bore sizes from 10 to 42mm and imperial bores 3/8” to 1 5/8”. Designed for rapid installation and removal of fan blades or pulleys from shafts. Other types available on request. *Please quote part number with bore size when order.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Hascon Custom Axial Impellers

FANS & BLOWERS

ALUMINIUM AXIAL IMPELLERS Technical Features: Aluminium axial impellers shape has been designed to produce higher airflow rates, while ensuring high efficiency and low noise emissions. Blades are manufactured using airfoil profile blades made of aluminum, with a light aluminum alloy hub. The impellers are available in configurations with 5/9/12/16 blades. Available in diameters from 450mm to 1282mm. Temperature rating from -500C to +1800C. Applications: Ventilators. Radiators. Generators. Snow Cannons. High Temperatures. Dryers and kilns. Tunnels. Cooling Towers.

Ø 900 - Ø 1282

Ø 450 - Ø 900 600

1000 900

500

800 700

400

600 300

500

1000 rpm 1500 rpm

400

200

300 200

100

100 0

ALUMINIUM REVERSIBLE IMPELLERS Technical Features: Reversable axial impellers are manufactured using reversible proﬁle blades made of aluminum, with a light aluminum alloy hub. The impellers are available in conﬁgurations with 5/9/12/16 blades both for clockwise and anticlockwise rotation. Available in diameters from 550mm to 966mm. Temperature rating from -500C to +1800C. Ø 550 - Ø 970 600

Applications: Brick drying. Leather drying. Timber drying. Heat exchanges. Cooling towers. Ventilators for livestock. Industrial ventilators. High temperature.

500

400

300

1000 rpm 1500 rpm

200

100

PLASTIC SICKEL IMPELLERS Technical Features: Sickel impellers are manufactured using sickle proﬁle blades, with a light aluminum alloy hub. The impellers are used in applications that require low noise emission levels. The impellers can be assembled with 3/5/6/8 blades. Available in diameters from 550mm to 1100mm. Temperature rating from -400C to +1200C. Applications: Animal farms. Conditioners. Generator units. Axial Ventilators. Earth moving machines. Radiators. Snow cannons. Refrigeration and freezing. Cars and industrial vehicles. Heat exchangers. Cooling towers. Agricultural machineries and tractors.

Ø 553 - Ø 1100 1200

1000

800

600

1000 rpm 1500 rpm

400

200

PLEASE CONTACT ARGON FOR PRICING AND AVAILABILITY, PROVIDE MOTOR KW, RPM, ROTATION, BLADE DIAMETER AND FORM FOR SELECTION. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Multi-Wing Series Impellers

FANS & BLOWERS

CUSTOM TRIMMED FAN BLADES MULTI-WING M SERIES IMPELLERS Kit Set code

Airflow direction

Pitch

Maximum diameter

Bore size

Code

List Price

A/B

30o

660

½”

$125.00

A/B

35o

660

½”

$125.00

A/B

40o

660

½”

$125.00

30o 320-8MR30-012 35

320-8MR35-012 40

320-8MR40-012

Temprature rating -40ºC - +110ºC. Argon Distributors for selection.

■

*Contact

CUSTOM TRIMMED FAN BLADES MULTI-WING D SERIES IMPELLERS Kit Set code

Airflow direction

Pitch

Maximum diameter

Bore size

Code

List Price

320-8DR30-012

A/B

30o

660

½”

$155.00

320-8DR30-019

A/B

660

19mm

$155.00

320-8DR30-034

A/B

30o

660

¾”

$155.00

320-8DR35-012

A/B

35o

660

½”

$155.00

320-8DR35-019

A/B

660

19mm

$155.00

320-8DR35-034

A/B

660

¾”

$155.00

320-8DR40-012

A/B

40o

660

½”

$155.00

320-8DR40-019

A/B

40o

660

19mm

$155.00

320-8DR40-034

A/B

660

¾”

$155.00

30o

40o

Temprature rating -40ºC - +110ºC. *Contact Argon Distributors for selection. ■

■

Full Range of Multi-wings available.

■

G series - up to 2.7M diameter

■

Z series - up to 1.2M diameter

■

H series - up to 700mm diameter

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

■

We use dedicated software to pitch and trim these impellers. Please contact us with your application.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Aluminium Fan Blades

ALUMINIUM HUBLESS FAN BLADES Part No.

Diameter

Rotation

Pitch

Watts

Code

List Price

5+ List Price

320-AH73763-2

154

28º

$16.50

$13.20

320-AH73803-2

154

ACW

28º

$16.50

$13.20

320-AH73766-2

172

28°

$17.50

$14.00

320-AH73806-2

172

ACW

28°

$17.50

$14.00

320-AH73769-2

200

28°

$18.50

$14.80

320-AH73809-2

200

ACW

28°

$18.50

$14.80

320-AH73772-2

230

25°

$19.50

$15.60

320-AH73812-2

230

ACW

25°

$19.50

$15.60

320-AH73775-2

254

25°

$21.00

$16.80

320-AH73815-2

254

ACW

25°

$21.00

$16.80

320-AH73778-2

300

25°

$27.00

$21.60

320-AH73818-2

300

ACW

25°

$27.00

$21.60

Aluminium Hubless Fan Blades suit small ACW rotation refrigeration motors with hub drive plates. Light and economical with range of sizes from 154mm to 300mm. There is two forms for different air flow direction: CW. When viewed from the side, blade pitch angled down from left to right. Air away from the motor (Forced) with anti clockwise (ACW) motor rotation. ACW. When viewed from the side, blade pitch angled up from left to right. Air over the motor (Induced) with anti clockwise (ACW) motor rotation. Note: motor shaft rotation is usually described when viewed from shaft end. If motor rotation is clockwise (CW) then the opposite blade type to above is used for correct air flow direction. ie. CW blade will provide air over motor (induced) and ACW will provide air away from motor (forced).

ALUMINIUM FAN BLADES - TORIN Part No.

Blades

Pitch

Bore Size

Rotation

320-PS3-305A25L

305

12”

25o

5/16”

CCW

$85.00

320-PS3-305A25R

305

12”

25o

5/16”

$85.00

320-PM4-356N32R

356

14”

32o

½”

CCW

$105.00

320-PH3-457A25L

457

18”

25o

½”

CCW

$165.00

320-PH3-508A25R

508

20”

½”

CCW

$175.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Code

List Price

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Blower wheels

BLOWER WHEEL – SINGLE, 1/2” BORE Part No.

320-ID353 320-ID354 320-ID356 320-ID357 320-ID358 n n

Diameter

Width

Bore

Rotation

Code

List price

120 124 180 180 180

60 60 40 50 60

1/2” 1/2” 1/2” 1/2” 1/2”

CW CW CW CW CW

A A A A A

$180.00 $190.00 $210.00 $210.00 $220.00

Diameter

Width

Bore

Rotation

Code

List price

145 145 180 152 180 200 200 217

38 100 102 83 51 100 100 76

5/16” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”

CW CW CW CW CW CW CW CW

A A A A A A A A

$110.00 $115.00 $110.00 $120.00 $120.00 $130.00 $130.00 $135.00

Galvanized metal construction. Wheels pictured are CW rotation.

BLOWER WHEEL – BLOWER FASCO Part No.

320-1-6143 320-1-6002 320-1-6005 320-1-6058 320-1-6066 320-1-6006 320-1-6074 320-1-6076 n n

Galvanized metal construction. Wheels pictured are CW rotation.

BLOWER WHEEL – DOUBLE, 1/2” BORE - PLASTIC Part No.

320-T017-013 320-SP23040 320-T101-089

Diameter

Width

Material

Rotation

Code

List price

145 156 203

190 200 198

Plastic Plastic Plastic

Bi-Direc Bi-Direc Bi-Direc

A A A

$105.00 $70.00 $155.00

BLOWER WHEEL – DOUBLE, 1/2” BORE - METAL Part No.

320-LA22XC091 320-T101-074 320-T101-075 320-T101-070 320-T101-071 320-LA22XC100 320-T101-073 n

Diameter

Width

Material

Rotation

Code

List price

240 244 244 240 240 268 270

178 180 180 240 240 204 270

Metal Metal Metal Metal Metal Metal Metal

CCW CCW CW CCW CW CCW CW

A A A A A A A

$190.00 $175.00 $175.00 $195.00 $195.00 $235.00 $225.00

Wheel shown CW rotation from boss end.

*We can supply larger fan wheels to suit Nicotra, Torin etc.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Hot Air Circulation

FANS & BLOWERS

HOT AIR CIRCULATOR - FASCO Input watts

Speed

Amps

M3/H

Code

List Price

2000

0.36

200

$125.00

3-HOLES 5Ø

3-HOLES 8.5 Ø

Part No.

133-J06OV02/KT

87.8 TYP. 63.0 TYP.

SECTION A-A

46 TYP. 15.5 8 (MIN.)

6.3MM TAB EARTH

Ø 100

120∞

5.05 FLAT 4.95 S/STEEL 431 M6 X 1 LH THREAD

118

19.1 NOM.

Ø 6.0

Ø 9.4

6.3MM TABS BENT

60 TYP.

FAN BLADE

2.5

SUPPLIED LOOSE:1-OFF BLADE (FBM1503FF) 1-OFF DOME NUT 1-OFF DISC OVEN INSULATING 1.5mm 3-OFF SCREWS #12x3/4 PH. PD

COIL RESISTANCE - 71 OHMS

ROTATION

HOT AIR CIRCULATOR - EBM PAPST Part No.

Input watts

Speed

Amps

M3/H

Code

List Price

1850

0.27

200

$155.00

130-R2K150-AC03-25

R84,2

4,08° 4,08°

60 20

R 8,3 98,3

4,3

3xØ

8,2

31,2 5°

° 35,67

° 35,67 8,2

4,3

Ø 152

3xØ

R84,2

connector connector 6,3 x 0,8 6,3 x 0,8

HOT AIR CIRCULATOR - FIME Part No.

130-C25R001 130-CR25R8138

Input watts

Speed

Amps

M3/H

Code

List Price

35 35

1850 1850

0.3 0.3

200 200

A A

$165.00 $155.00

FIME C25 R 001 00

230V~ 50Hz 35W Cl.H

MIN MAX

*130-CR25R8138 has short shaft (17mm) Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Inline Fans

FANS & BLOWERS

IN-LINE AXIAL 230V FAN AC - EBM Part No.

Diameter

Max Temp

Air Flow

Watts input

Speed RPM

Noise

Code

List Price

130-W2S130-AA03-63

150mm

50°C

325m3/h

2800

$230.00

130-W2S130-AA03-63M

150mm

50°C

325m /h

2800

$245.00

Diameter

Max Temp

Air Flow m3/h (max)

Watts input

Speed RPM

Noise

Code

List Price

100

55°C

250

2820

$280.00

M type with Spigot.

IN-LINE FAN PLASTIC Part No.

130-ICP100 130-ICP125

125

55°C

355

2800

$305.00

130-ICP150

150

55°C

460

2725

$345.00

130-ICP200

200

50°C

780

107

2660

$480.00

130-ICP250

250

50°C

1080

173

2090

$525.00

130-ICP315

315

45°C

1700

310

2590

$575.00

AC external rotor motor with overheat protection (auto restart). Maintenance free ball bearings designed to 40,000 hours. n Mounting legs supplied loose. n IP44 n n

DIMENSIONS AND SPECIFICATIONS L

100

250

270

230

2.15

130-ICP125

125

250

270

220

2.2

130-ICP150

150/160

300

310

286

2.6

130-ICP100

130-ICP200

200

340

354

276

4.0

130-ICP250

250

340

354

265

4.5

130-ICP315

315

400

414

276

5.2

Ø0

ØD1

ØD

ØD1

Model No.

IN-LINE FAN METAL Part No.

130-ICM100

Diameter (mm)

Air Flow m3/h (max)

Watts Input

Speed RPM

max static pressure (Pa)

Amps

Code

List Price

100

250

2610

360

0.28

$270.00

130-ICM125

125

320

2620

350

0.32

$280.00

130-ICM150

150

550

100

2460

395

0.45

$295.00

130-ICM200

200

930

158

2600

565

0.69

$385.00

130-ICM250

250

1030

190

2410

560

0.86

$410.00

130-ICM315

315

1800

280

2490

700

1.22

$520.00

Backward-curved centrifugal impeller. ABS (FR) connection box. n Motor is equipped with automatic reset thermal overload protection. n Operating temperature range 20oC-50oC. n Enclosure class IP 44. E

100

243

196

130-ICM125

125

243

196

130-ICM150

150

333

217

130-ICM200

200

333

217

130-ICM250

250

333

217

130-ICM315

315

402

255

130-ICM100

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

ØA

Model No.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ØB

DIMENSIONS AND SPECIFICATIONS

FANS & BLOWERS

Mosswyn 12V DC Compact Axials

MOSSWYN TUBE AXIAL FANS 12V DC 40X40X10 Part No.

130-304010-TBL

Frame Size

40x40x10

Volts

Input watts

1.2

Speed

7000

Max. Air Flow CFM

m3/h

6.3

10.8

Noise

Code

List Price

$16.50

Voltage: 12V DC. ■ Bearing Type: Ball. ■ Current: 0.10A. ■ Operating temperature: -20º...+80ºC. ■

VOLT

MOSSWYN TUBE AXIAL FANS 12V DC 60X60X25 Part No.

130-306025-TBL

Frame Size

60x60x25

Volts

Input watts

1.5

Speed

4300

Max. Air Flow CFM

m3/h

33.6

Noise

Code

List Price

$17.50

Voltage: 12V DC. ■ Bearing Type: Ball. ■ Current: 0.12A. ■ Operating temperature: -20º...+80ºC. ■

VOLT

MOSSWYN TUBE AXIAL FANS 12V 80X80X25 Part No.

130-308025-TBL

Frame Size

80x80x25

Volts

Input watts

2.3

Speed

3200

Max. Air Flow CFM

m3/h

63.6

Noise

Code

List Price

$18.50

Voltage: 12V DC. ■ Bearing Type: Ball. ■ Current: 0.19A. ■ Operating temperature: -20º...+80ºC. ■

VOLT

MOSSWYN TUBE AXIAL FANS 12V 92X92X25 Part No.

130-309025-TBL

Frame Size

92x92x25

Volts

Input watts

2.4

Speed

2900

Max. Air Flow CFM

m3/h

82.2

Voltage: 12V DC. Bearing Type: Ball. ■ Current: 0.20A. ■ Operating temperature: -20º...+80ºC.

Noise

Code

List Price

$20.50

■ ■

VOLT

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Mosswyn 12V DC Compact Axials

MOSSWYN TUBE AXIAL FANS 12V DC 120X120X25 Part No.

130-312025-TBL

Frame Size

Volts

120x120x25

Input watts

4.3

Speed

3200

Max. Air Flow CFM

m3/h

143.4

Noise

Code

List Price

$26.50

Voltage: 12V DC. ■ Bearing Type: Ball. ■ Current: 0.36A. ■ Operating temperature: -20º...+80ºC. ■

VOLT

MOSSWYN TUBE AXIAL FANS 12V DC 120X120X38 Part No.

130-312038-TBL

Frame Size

Volts

120x120x38

Input watts

11.0

Speed

4300

Max. Air Flow CFM

m3/h

118

199.8

Noise

Code

List Price

$41.00

Voltage: 12V DC. ■ Bearing Type: Ball. ■ Current: 0.90A. ■ Operating temperature: -20º...+80ºC. ■

VOLT

MOSSWYN TUBE AXIAL FANS 12V DC 150X150X51 Part No.

130-315051-TBL

Frame Size

Volts

150x172x51

Input watts

23.0

Speed

3200

Max. Air Flow CFM

m3/h

229

390

Noise

Code

List Price

$158.00

Voltage: 12V DC. Bearing Type: Ball. ■ Current: 1.90A. ■ Operating temperature: -20º...+80ºC. ■ ■

VOLT

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Mosswyn 24V DC Compact Axials

MOSSWYN TUBE AXIAL FANS 24V DC 40X40X10 Part No.

130-404010-TBL

Frame Size

40x40x10

Volts

Input watts

1.4

Speed

7000

Max. Air Flow CFM

m3/h

6.3

10.8

Noise

Code

List Price

$16.50

Voltage: 24V DC. ■ Bearing Type: Ball. ■ Current: 0.06A. ■ Operating temperature: -20º...+80ºC. ■

VOLT

MOSSWYN TUBE AXIAL FANS 24V DC 60X60X25 Part No.

130-406025-TBL

Frame Size

60x60x25

Volts

Input watts

1.7

Speed

4300

Max. Air Flow CFM

m3/h

33.6

Noise

Code

List Price

$17.50

Voltage: 24V DC. ■ Bearing Type: Ball. ■ Current: 0.07A. ■ Operating temperature: -20º...+80ºC. ■

VOLT

MOSSWYN TUBE AXIAL FANS 24V 80X80X25 Part No.

130-408025-TBL

Frame Size

80x80x25

Volts

Input watts

2.4

Speed

3200

Max. Air Flow CFM

m3/h

63.6

Noise

Code

List Price

$18.50

Voltage: 24V DC. ■ Bearing Type: Ball. ■ Current: 0.10A. ■ Operating temperature: -20º...+80ºC. ■

VOLT

MOSSWYN TUBE AXIAL FANS 24V 92X92X25 Part No.

130-409025-TBL

Frame Size

92x92x25

Volts

Input watts

2.6

Speed

2900

Max. Air Flow CFM

m3/h

82.2

Voltage: 24V DC. ■ Bearing Type: Ball. ■ Current: 0.11A. ■ Operating temperature: -20º...+80ºC.

Noise

Code

List Price

$20.50

■

VOLT

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Mosswyn 24V DC Compact Axials

MOSSWYN TUBE AXIAL FANS 24V DC 120X120X25 Part No.

130-412025-TBL

Frame Size

Volts

120x120x25

Input watts

4.7

Speed

3200

Max. Air Flow CFM

m3/h

143.4

Noise

Code

List Price

$26.00

Voltage: 24V DC. ■ Bearing Type: Ball. ■ Current: 0.19A. ■ Operating temperature: -20º...+80ºC. ■

VOLT

MOSSWYN TUBE AXIAL FANS 24V DC 120X120X38 Part No.

130-412038-TBL

Frame Size

Volts

120x120x38

Input watts

10.0

Speed

3200

Max. Air Flow CFM

m3/h

118

199.8

Noise

Code

List Price

$41.00

Voltage: 24V DC. Bearing Type: Ball. ■ Current: 0.42A. ■ Operating temperature: -20º...+80ºC. ■ ■

VOLT

MOSSWYN TUBE AXIAL FANS 24V DC 150X150X51 Part No.

130-415051-TBL

Frame Size

Volts

150x172x51

Input watts

22.0

Speed

3400

Max. Air Flow CFM

m3/h

229

390

Noise

Code

List Price

$158.00

Voltage: 24V DC. Bearing Type: Ball. ■ Current: 0.90A. ■ Operating temperature: -20º...+80ºC. ■ ■

VOLT

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

EBM DC Compact Axials

EBM COMPACT AXIAL 24V DC FAN 119X38 Part No.

130-4184NX

Frame Size (MM)

119x38

Volts (DC)

12…30

Input watts

Air Flow m3/h

CFM

180

Speed RPM

Noise

Code

List price

3200

$99.00

Features ■ Fibreglass-reinforced plastic impeller and housing. ■ Protection against reverse polarity and locking. ■ Connection via single strands AWG 24, TR 64. Bared and tin-plate. ■ Air exhaust over struts. Clockwise rotation (seen on rotor). ■ Lifetime at 40ºC :85000h. ■ Lifetime at 70ºC :42500h. ■ Bearings: Ball. ■ Temp ºC: -30 to +70.

EBM COMPACT AXIAL 24V DC FAN 80X80X32 Part No.

130-8314

Frame Size (MM)

80x80x32

Volts (DC)

12…31.5

Input watts

2.7

VOLT

DC axial compact fan

8314 Air Flow m3/h

CFM

31.8

Speed RPM

Noise

Code

List price

3300

$75.00

Product drawing

Features: ■ Fibreglass-reinforced plastic impeller and housing. ■ Protection against reverse polarity and locking. ■ Blocking and overload protection. ■ Connection via single strands AWG 24, TR 64. Bared and tin-plate. ■ Air Exhaust over struts. Clockwise rotation (seen on rotor). ■ Lifetime at 40ºC: :Model 8314= 70000h. ■ Lifetime at 75ºC: :Model 8314=22500h. ■ Bearings: Ball. ■ Temp ºC: -20…+75.

VOLT

DC axial compact fan

4314 EBM COMPACT AXIAL 24V DC FAN 120X120X32 Part No.

Frame Size (MM)

Volts (DC)

Input watts

Air Flow m3/h

130-4314

119x119x32

12…28

5.0

Speed RPM

Code

List price

$81.00

CFM

Product drawing 170 100 2800

Features: ■ Fibreglass-reinforced plastic impeller and housing. ■ Protection against reverse polarity and locking. ■ Blocking and overload protection. ■ Connection via single strands AWG 24, TR 64. Bared and tin-plate. ■ Air exhaust over struts. Clockwise rotation (seen on rotor). ■ Lifetime at 40ºC: :62500h. ■ Lifetime at 75ºC: :27500h. ■ Bearings: Ball. ■ Temp ºC: -20…+75.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Noise

VOLT

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

EBM DC Compact Axials

Part No.

Frame Size (MM)

Volts (DC)

Input watts

Air Flow m3/h

130-4412H

120x120x38

7-14

8.6

DC axial compact fan

4412 H

EBM COMPACT AXIAL 24V DC FAN 120X120X38

sickled blades (S series)

Speed RPM

Noise

Code

List price

4300

$79.00

CFM

240

141

Product drawing

Features: ■ Innovative impeller with winglets for low noise. ■ Fibreglass-reinforced plastic impeller and housing. ■ Fully integrated electronic commutation. ■ Protection against reverse polarity and locking. ■ Connection via single strands AWG 24, TR 64. Bared and tin-plate. ■ Air exhaust over struts. Clockwise rotation (seen on rotor). ■ Lifetime at 40ºC :855000h. ■ Lifetime at 70ºC :42500h. ■ Bearings: Ball. ■ Temp ºC: -20…+70.

Frame Size (MM)

Volts (DC)

Input watts

Air Flow m3/h

130-7214N

150x55

12…30

DC axial compact fan

7214 N

EBM COMPACT AXIAL 24V DC FAN 150X55 Part No.

VOLT

360

Speed RPM

Noise

Code

List price

$245.00

CFM

211 3050 Product drawing

Features ■ Fibreglass-reinforced plastic impeller and housing. ■ Protection against reverse polarity and locking. ■ Connection via single strands AWG 24, TR 64. Bared and tin-plate. ■ Air exhaust over struts. Clockwise rotation (seen on rotor). ■ Lifetime at 40ºC :80000h. ■ Lifetime at 70ºC :37500h. ■ Bearings: Ball. ■ Temp ºC: -25 to +72.

EBM COMPACT AXIAL 24V DC FAN 172X51 Part No.

130-6224N

Frame Size (MM)

172x51

Volts (DC)

12…28

Input watts

Features ■ Fibreglass-reinforced PA plastic. ■ Protection against reverse polarity and locking. ■ Connection via flat plugs 3.0 x 0.5. ■ Air exhaust over struts. Anti Clockwise rotation (seen on rotor). ■ Lifetime at 40ºC :75000h. ■ Lifetime at 72ºC :35000h. ■ Bearings: Ball. ■ Temp ºC: -20 to +72.

VOLT

DC axial compact fan

6224 N Air Flow m3/h

CFM

410

241

Speed RPM

Noise

Code

List price

3400

$249.00

Product drawing

Web data sheet · Page 3 / 4

VOLT

ebm-papst St. Georgen GmbH & Co. KG · Hermann-Papst-Str. 1 · D-78112 St. Georgen · Phone +49 (0) 7724 81-0 · Fax +49 (0) 7724 81-130 www.ebmpapst.com

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Mosswyn Compact Axial Fans

FANS & BLOWERS

COMPACT AXIAL FAN 80X80X25

130-008025-TBT

Size

80x80x25

Volts

230

Air Flow max CFM

M3/h

Speed

Input Watts

Current Amps

Code

List Price

2400

0.05

$28.50

Technical Features: ■■ Housing: Die cast aluminium painted black. ■■ Impeller: Thermoplastic PBT UL94V. ■■ Ball Bearings. ■■ Connection: Terminals. ■■ Operating voltage: 185-245 VAC. ■■ Impedance protection. ■■ Operating temperature: -20º...+80ºC. ■■ Hz: 50/60.

Airflow Ø4.3±0.2

71.5±0.3

Rotation

80±0.5

Part No.

3.5 25.5±0.5

COMPACT AXIAL FAN 80X80X38

130-008038-TBT

Size

80x80x38

Volts

230

Air Flow max CFM

M3/h

Speed

Input Watts

Current Amps

Code

List Price

2700

0.08

$30.50

Ø4.3±0.2

71.5±0.3

Rotation

Airflow

80±0.5

Part No.

3.5

38.5±0.5

COMPACT AXIAL FAN 92X92X25

130-009025-TBT

Size

92x92x25

Volts

230

Air Flow max CFM

M3/h

Speed

Input Watts

Current Amps

Code

List Price

2700

0.07

$35.00

Technical Features: ■■ Housing: Die Cast aluminium painted black. ■■ Impeller: Thermoplastic PBT UL94V. ■■ Ball Bearings. ■■ Connection: Terminals. ■■ Operating voltage: 185-245 VAC. ■■ Impedance protection. ■■ Operating temperature: -20º...+80ºC. ■■ Hz: 50/60.

Airflow

82.5±0.3

Ø4.3±0.2

92.5±0.5

Part No.

3.5

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

25.5±0.5

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Mosswyn Compact Axial Fans

COMPACT AXIAL FAN 120X120X25

130-012025-TBT

Size

120x120x25

Volts

Air Flow max CFM

M3/h

108

230

Speed

Input Watts

Current Amps

Code

List Price

2600

0.07

$35.00

Airflow

Ø4.3±0.2

105±0.3

Rotation

119±0.5

Part No.

3.5 25.5±0.5

COMPACT AXIAL FAN 120X120X38 Part No.

Size

Volts

Air Flow max CFM

M3/h

Speed

Input Watts

Current Amps

Code

List Price

130-112038-TBT

120x120x38

115

144

2600

0.26

$39.00

130-012038-TBT

120x120x38

230

144

2700

0.13

$39.00

Rotation

Airflow

105±0.3

Ø4.5±0.2

119±0.5

38.5±0.5

COMPACT AXIAL FAN 151X172X51 Part No.

Size

Volts

Air Flow max CFM

M3/h

Speed

Input Watts

Current Amps

Code

List Price

130-015138-TBT

151x172x38

230

198

336

2900

0.11

$70.00

130-015151-TBT

151x172x51

230

198

336

2900

0.11

$70.00 Airflow 30±0.5

86±0.5 51±0.5

3 151±0.5

55° 25±0.5

Technical Features: ■■ Housing: Die ast aluminium painted black. ■■ Impeller: Thermoplastic PBT UL94V. ■■ Ball Bearings. ■■ Connection: Terminals. ■■ Operating voltage: 185-245 VAC. ■■ Impedance protection. ■■ Operating temperature: -20º...+80ºC. ■■ Hz: 50/60. Hz: 50/60.

(Label)

95±

0.5

162±0.3 172±0.5

51±0.5

38.5±0.5 51.5

Please See Page ? For Cables, Guards + Filters

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Mosswyn Compact Axial Fans

FANS & BLOWERS

COMPACT AXIAL FAN 254X89

130-025489-FPD

Size

254x89

Volts

Air Flow max

230

CFM

M3/h

785

1320

Technical Features: ■■ Housing: Die cast aluminium painted black. ■■ Impeller: Injection molded polycarbonate. ■■ Ball Bearings. ■■ Connection: Terminals. ■■ Operating voltage: 185-245 VAC. ■■ Auto reset thermal protection. ■■ Operating temperature: -30….+80ºC. ■■ Hz: 50/60.

Speed

Input Watts

Current Amps

Code

List Price

2600

0.55

$305.00

Rotation

Airflow

246

Ø4.6

255

Part No.

3 89.5

COMPACT AXIAL FAN 225X225X80 Part No.

Size

Volts

Air Flow max CFM

M3/h

Speed

Input Watts

Current Amps

Code

List Price

130-122580-FMC

225x225x80

115

538

912

2480

0.68

$350.00

130-022580-FMC

225x225x80

230

538

912

2490

0.33

$310.00

Technical Features: ■■ Housing: Die cast aluminium. ■■ Impeller: Sheet steel welded to rotor. ■■ Ball Bearings. ■■ Connection: Terminal block. ■■ Operating voltage: 115v : 85-125VAC (capacitor 6.0mfd). ■■ 230v :185-245 VAC (capacitor 1.5mfd). ■■ Auto restart thermal protection. ■■ Operating temperature: -20….+60ºC. ■■ Hz: 50/60.

Rotation

Airflow 5

22 PE N L

Ø 4.5 240

260 COMPACT AXIAL FAN 280X280X80 Part No.

Size

Volts

Air Flow max CFM

M3/h

Speed

Input Watts

Current Amps

Code

List Price

130-125080-FMC

280x280x80

115

1065

1800

2560

129

1.14

$460.00

130-025080-FMC

280x280x80

230

1058

1800

2550

130

0.57

$440.00

Rotation

Airflow 0 28

Technical Features: ■■ Housing: Die cast aluminium. ■■ Impeller: Sheet steel welded to rotor. ■■ Ball Bearings. ■■ Connection: Terminal block. ■■ Operating voltage: 115v : 85-125V AC (capacitor 16.0mfd). ■■ 230v :185-245 VAC (capacitor 4.0mfd). ■■ Auto restart thermal protection. ■■ Operating temperature: -20….+50ºC. ■■ Hz: 50/60.

PE N L

Ø 5.4 295

320

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

85.3 230 50 44 130-EP8556N 80x80x38 94.2 230 50 m3/hdata – EP8556N46 Technical 94.2 230fan housing 50 and impeller. 47 ■ Metal

230

Frame size

Volts

5,3

Air flow

60 Hz

Air flow

50 Hz

Sound pressure level

Air flow

Volts

VAC

Input

Speed

Watts dB(A) Bel(A)

Air flow max

/ Rpm Watts CFM RPM m3/h

19 4,1

noise dB °C

2650 1,4 94 1 850 160 -20...+75 47

5,1

Watts

0,1

m /h protected CFM VAC VAC dB(A) Bel(A) / Impedance against overloading. 7 ACi 4410 HH 180over struts, 105,9 CW 115 85...132 42 5,3 rotor. EW ACi 4420 ML■ 20 Air intake 100 58,8 230 rotation 195...265looking 25 at 4,1 6 pins 3.039 x 0.5 5,1 mm. EW ACi 4420 H ■ Electrical 160connection 94,1 via 2302 flat 195...265 ■ Bearings: Ball. CFM 0 20 40105,9 60 230 80 195...265 EW ACi 4420 HH 180 42 5,3 125 m³/h 100 25 50 75 ■ VTemp ºC: -40…+85.

1,4

7 8 9 10

3,3

3 000

-20...+75

4,4

3 350

4,4

3 350

RPM

°C

1 850

Code

119

Hours

A 000 / 30$115.00 80 000 160 000

-20...+75

62 500 / 30 000

125 000

-20...+75

62 500 / 30 000

125 000

Hours

80 000 / 30 000

160 000

3,3

3 000

-20...+75

70 000 / 30 000

140 000

4,4

3 350

-20...+75

62 500 / 30 000

125 000

100

125

105,9

115

85...132

5,3

4,4

3 350

-20...+75

62 500 / 30 000

125 000

50 Hz

EBM COMPACT AXIAL 119X119X38 EC TYPE

2 0,20

40 0,10

119x119x38

Volts

230

Input Watts

Speed Rpm

List Price

m3/h

noise dB

Code

CFM

4.4

3350

106

180

$115.00

Technical data – ACI 4420 HHR ■ Energy efficient AC fan with EC technology. ■ Significantly lower power consumption and noise than existing AC fans. ■ Significant higher service life the existing AC fans. ■ Service life at 40oc …62 500 hrs, at 75ºC…30 000hrs, life expectancy at 40ºC…125 000hrs. ■ Conversion and drive fully integrated. ■ Electronic locked rotor protection. ■ Fibreglass-reinforced plastic impeller and housing. ■ Air exhaust over struts, CW rotation looking at rotor. ■ Electrical connection via 2 flat pins 20 3.0 x 40 60 80 100 CFM 0.5 mm. 20 40 60 80 100 CFM 5050 protection. 100 150 m³/h ■ IP54 100 150 m³/h ■ Bearings: Ball. ■ Temp ºC: -40…+75.

Air flow max

125

AC centrifugal fans

[in H2O]

130-ACI4420

Frame size

38 +0,5 6 +0,3

6 +0,3

38 +0,5 6 +0,3

6 +0,3

Accessories

Part No.

Information

CFM m³/h

HP Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

AC centrifugal fans

180

Accessories

EW ACi 4410 HH

DC Radia ACmaxx Axi

140 000

•

60 Hz

70 000 / 30 000

Hours

-20...+75

List Price

Hours

ACAccessories axial fans

■

H P SIP54 P SP 135

IP54

Representatives

0,2

VAC

Voltage range

CFM

9 130-EP4656N 100

ACi 4420 ML

Type

Frame size

m3/h

Nominal voltage

(in H ² O)

Part No.

0,3

Sound power level

CFM m³/h

Voltage range

Nominal data EBM COMPACT AXIAL 119X119X38 Type

(40 °C)

Nominal voltage

Technical 160 data – EP4656N ACiNominal 4420 H data 94,1 230 195...265 8 housing and impeller. ACi 4420 HH ■ 40 Metal Fan 180 105,9 230 195...265 3

37 500 / 15 000

– Air exhaust over struts, direction rotation clockwise, seen on rotor. existingofAC fans. –5.8Significant / higher service 18.0 life than 3 100 -40...+90 40 000 / 15 000 10 – Mass: 250dependent g. – Fan speed not on line frequency. General characteristics: – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. * Fan with 3 blades. – Electronic locked rotor protection. – Electrical connection via 2 flat plugs 2,8 x 0,5 mm, flying leads optional. – Air exhaust over struts, direction of rotation clockwise, seen on rotor. – Mass: 250 g.

50 25

Life expectancy L10∆

Sound power level Sintec sleeve bearings Ball bearings

115

119x119x38 230 58,8 230 195...265

42 500 / 30 000 $99.00 A 37 500 / 27 500

Curve

105.9

List Price

Service life L10 (40 °C) ebm-papst Standard Life expectancy L10∆ (40 °C) Service life L10 (Tmax) ebm-papst Standard

105.9 ■

180

Code

40 000 / 27 500

Service life L10 (Tmax) ebm-papst Standard

180

■

Temperature range

99.5

Service life L10 (40 °C) ebm-papst Standard

169

-40...+85

Nominal speed

■ 88.9

2 650

Temperature range

57.1

19.0

Power input

Nominal speed

■

151

5.5

– Significantly thanxexisting Series ACi 4400 lower 119noise x 119 38 mmAC fans.

Sintec sleeve bearings Ball bearings

50.0

noise

1 2

Impedance protected against overloading. AC fans. 57 500 / 25 000 higher 115 60 26 4.1– Significant / 10.0 service1life 650than existing -10...+75 Air exhaust over struts, CW rotation – Fan speed not dependent on line frequency. 115 at rotor. 60 32 4.3 / 9.0 1 750 -10...+75 60 000 / 27 500 looking Highlights: General characteristics: Electrical via45 310mm lead. –5.4Energy efficient AC16.0 fan with EC technology. 115 connection 60 / 2 700 -10...+65 42 500 / 25 000 – Material: fibreglass-reinforced plastic. Impeller PA, housing PBT. Stripped and tinned ends. – Conversion and drive electronics fully integrated. 115 60 48 5.7– Electronic / 15.0 rotor protection. 3 000 -10...+65 47 500 / 25 000 locked Bearing: Ball. – Significant lower power consumption than existing AC fans. – Electrical connection viaexisting flat AC plugs x 0,5 mm, flying leads optional. 115ºC: -10…+90. 60 50 / lower 18.0 32 100 -10...+60 40 000 / 25 000 –5.7Significantly noise than fans.2,8 Temp

■

Air flow max

Power input

160

Speed

55 000 / 27 500 57 500 / 27 500

i-maxx axial fans – Significant lower power consumption than existing AC fans.

Sound pressure level

max.

Input

5.2Highlights: / Watts18.0 Rpm 2 350 -10...+55dB CFM m3/h EC technology. 5.4– Energy / efficient 16.5AC fan with 2 550 -10...+55 230 50 12 2800 29.4 50 31 and integrated. 5.4– Conversion / 19.0drive electronics 2 650 fully -10...+55

180

160

-10...+70

DC axial fans

145

Part No.

1 800

DC centrifugal fans

72.4

10.0

DC fans - specials

123

ACmaxx / i-maxx

COMPACT 80X80X38 58.9EBM230 50 AXIAL 32 4.4

AC axial fans

100

InformationACSpecials Axial Fans

18.01.2011 135x -10...+70 Series x 119 38 mm / ACi 4400 11.014:19119 1Seite 550

ktlüfter__2011__EN__Final__17_01_2011_:Vorlage 80 47.1 230 50 25 4.0

Hours

135

GREEN TECH

✓

Representatives

AWG 18, TR 64

DC axial fans ACmaxx Axial Fans Fans AC Radial

-1

AWG 22

440 mm long

Curve

Hours

Axial Fans310 mm long

i-maxx Watt axial minfans

AWG 18, TR 64

centrifugal AC DC Axial Fans fans Accessories

°C

310 mm long 310 mm long

Curve

8500 N

ACmaxx / i-maxx DC fans - specials AC Radial Fans

Bel

Seite Lead135 Wires

at Tmax

8850 N

Service Life L10 at 40 °C

180 CFM

8550 N

EBM 8556 N Compact 8506 N

FANS & BLOWERS

max. m /h

8800 N

Temperature Range

Noise

dB(A)

8880 N

Power Input

Frequency Hz

8830 N

14:19

Nominal Speed

Sintec-Sleeve Bearin Ball Bearings

Nominal Voltage

mV3/h

Air Flow

lüfter__2011__EN__Final__17_01_2011_:Vorlage Fan Type 18.01.2011

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Compact Axial17Fans3,100 44 5.6 Yes

656ZWU

-40...85

540

IP68

Yes

105.9

115

5.6

-40...85

560

IP68

Yes

FANS & BLOWERS 105.8 230

606ZWU-879

RPM

3,100

Yes

Mass

Tempera

Watts

UL Appr

Bel(A)

Ingress P

Sound p

dB(A)

Speed (1)

Sound pr

VDC

Power in

Nominal

ype

Ball beari

Air flow

CFM

Nominal Data

(1) Nominal data at maximum load. Data listed in this table is measured with a power frequency of 60Hz.

EBM COMPACT AXIAL 119X119X38 IP68 TYPE

130-4656ZWU

Frame size

119x119x38

Volts

230

Input Watts

Speed Rpm

CFM

m3/h

noise dB

Code

List Price

2650

152

$163.00

Technical data – 4656ZWU ■ Metal fan housing, Impeller and blades. ■ Air exhaust over struts. ■ Connection via electrical leads- 310mm long. ■ Overload protection. ■ 50/60Hz. ■ IP68 Ingress protection. ■ Bearings: Ball. ■ Temp ºC: -40…+70.

70 60 50 40 30

1.50

Air flow max

) (38±0.4

0.37

(9.5)

4.13 (104.8±0.2)

Part No.

Curves: Airflow at 60 Hz

Ø4.53 (115)

20 10

4.13 0

100

120

4.69

cfm

160

0.18

(104

(119±

.8±0.2)

0.3)

(4.5±0

.2)

0.17 (4.3±0.15)

m³/h

EBM COMPACT AXIAL 127X127X38 Part No.

Frame size

Volts

13 130-EP5958

127x127x38

230

Input Watts

Speed Rpm 3100

Air flow max CFM

m3/h

108

180

noise dB

Code

List Price

$163.00

Technical data – EP5958 ■ Metal fan housing. ■ Fiberglass-reinforced PA plastic Impeller. ■ Air exhaust over struts. ■ Connection via 2 flat plugs 2.8 x 0.8mm. ■ Overload protection. ■ ■

Bearings: Ball. Temp ºC: -30 to +60.

EBM COMPACT AXIAL Part No.

Frame size

Volts

Input Watts

Air flow max m3/h

Current Amps

Speed Rpm

Code

List Price

130-W2S130-BM03-01

150x172x55

230

385

0.33

2760

$231.00

Technical data ■ Housing: Die-cast aluminium. ■ Impeller: Sheet steel, coated black. ■ Electrical connection: Direction of airflow: A. ■ Protection: IP20. ■ Insulation Class B. ■ Motor protection: Thermal overload protector. ■ Electrical connection: 300mm twin cable. ■ Operating temperature: -25°C to 50°C. ■

Bearings: Ball. Airflow Direction: A=Forced V=Induced

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Compact Axial EBM ESM Series Axial Fans

FANS & BLOWERS

EBM ESM EC 130MM AXIAL FAN Part No.

Blade Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-W1G130-AA25-11

130

230

2800

019

$235.00

Technical Features: ■ ■

Minimum temperature -30°C. Maximum temperature +70°C.

EBM COMPACT AXIAL Part No.

130-W2E142-BB01

Frame size

Volts W2E142-BB01-01

Input Watts

172x150x38 3. TECHNICAL 230 DATA 3.1 Product drawing

Air flow Current Speed Operating instructions max Amps Rpm m3/h

330

0.12

2800

Code

List Price

$265.00

Code

List Price

$249.00

Technical data ■ Housing: Die-cast aluminium. ■ Impeller: Sheet steel, coated black. ■ Electrical connection via plug. ■ Air Exhaust over struts. ■ Protection: IP22. ■ Insulation Class B. ■ Motor protection: Thermal overload protector. ■ Operating temperature: -25°C to 55°C. ■ Bearings: Ball.

All measures have the unit mm.

Translation of the original operating instructions

EBM ESM EC 200MM AXIAL FAN Part No.

Blade Diameter

130-W1G200-EC91-19

200

2x flat plug 2.8 x 0.5 mm

EC axial fan - ESM

W1G200-EC91-19

Input watts

Volts

31 drawing 230 Product

sickled blades (S series) Speed Current ESM wall ring RPM

Amps

2100

0.24

Technical Features: ■ EC type Axial fan. ■ Impeller: Plastic PA6 fibreglass reinforced. ■ IP54 Protection, class B insulation. ■ Speed selection Max/Min. ■ Soft start. Item no. 10761-5-9970 · Revision 82552 · Release 2014-05-08 · Page 4 / 9 ■ Over-temperature protection. ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com ■ Thermal overload protection. ■ Minimum temperature -30°C. ■ Maximum temperature +50°C.

GREEN TECH

✓

Direction of air flow "V"

Connection line AWG20; 3 x brass lead tips crimped

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website. Connection screen

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Compact Fan Accessories

FANS & BLOWERS

WIRE FINGER GUARD Suit Frame Size

Code

List Price

130-W080

80 x 80

$3.00

130-W090

92 x 92

$3.50

130-W120

120 x 120

$3.75

130-W172

151 x 172

$7.50

130-W254

254

$9.50

W090

W120

115.6±0.3

W080

105.0±0.3

Part No.

Ø4.6±0.1 4.5±0.2

W172

unit: mm

W254

unit: mm

Ø6.0±0.1

174.0±0.3

162.0±0.3

222.0±0.3

Ø4.6±0.2

44±0.2

6.5±0.2

unit: mm

PLASTIC FAN FILTER Part No.

Suit Frame Size

Code

List Price

80 x 80

$5.00

130-PF090

92 x 92

$5.50

130-PF120

120 x 120

$6.00

130-PF172

151 x 172

$7.00

Length

Code

List Price

130-C0305

305mm

$3.00

130-C1220

1220mm

$3.75

Description

Code

List Price

0-10K potentiator with housing

$135.00

130-PF080

LEAD CONNECTOR Part No.

POTENTIOMETER0-10K Part No.

130-CLC000AE0401

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Papst Axial Fans 200mm

FANS & BLOWERS

200MM AXIAL FAN INDUCED AIR FLOW Part No.

Blade Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-A2E200-AK38-01

200

230

2670

0.30

$275.00

Technical Features: Blades: Sheet steel coated in black. ■ Counter clockwise looking at rotor side. ■ Protection: IP44. ■ Insulation: Class B. ■ Overload protection internally wired. ■ Capacitor: 1.5MFD. ■ Air flow direction: V. ■ Wiring diagram: A1. ■ Max temperature: 65°C. ■

Airflow Direction: A=Forced V=Induced

200MM AXIAL FAN FORCED AIRFLOW Part No.

Blade Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-A2E200-AI38-01

200

230

2600

0.3

$275.00

Technical Features: ■ Blades: Sheet steel coated in black. ■ Counter clockwise looking at rotor side. ■ Protection: IP44. ■ Insulation: Class B. ■ Overload protection internally wired. ■ Capacitor: 1.5MFD. ■ Air flow direction: A. ■ Wiring diagram: A1. ■ Max temperature: 65°C.

Airflow Direction: A=Forced V=Induced

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Papst Axial Fans 250mm

FANS & BLOWERS

250MM AXIAL FAN FORCED AIRFLOW

130-A2E250-AE65-02

Blade Diameter

Input watts

Volts

250

115

230

Airflow Direction: A=Forced V=Induced

Part No.

Speed RPM

Current Amps

Code

List Price

2550

0.51

$355.00

Technical Features: ■ Blades: Sheet steel coated in black. ■ Clockwise looking at rotor side. ■ Protection: IP44. ■ Insulation: Class B. ■ Overload protection internally wired. ■ Capacitor: 4.0MFD. ■ Air flow direction: A. ■ Wiring diagram: A1. ■ Max temperature: 55°C.

Airflow Direction: A=Forced V=Induced

250MM AXIAL FAN INDUCED AIRFLOW Part No.

Blade Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-A2E250-AL06-01

250

115

230

2450

0.51

$320.00

Technical Features: ■ Blades: Sheet steel coated in black. ■ Counter Clockwise looking at rotor side. ■ Protection: IP44. ■ Insulation: Class B. ■ Overload protection internally wired. ■ Capacitor: 3MFD. ■ Air flow direction: V. ■ Wiring diagram: A1. ■ Max temperature: 65°C.

Airflow Direction: A=Forced V=Induced

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

EBM Papst Axial Fans 300-350mm

300MM AXIAL FAN INDUCED AIR FLOW Part No.

Blade Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-A4E300-AS72-01

300mm

230

1230

0.32

$325.00

Technical Features: ■■ Blades: Sheet steel coated in black. ■■ Counter clockwise looking at rotor side. ■■ Protection: IP54. ■■ Insulation: Class B. ■■ Overload protection internally wired. ■■ Capacitor: 1.5MFD. ■■ Air flow: V. ■■ Wiring diagram: A1. ■■ Min temp: -50°C. ■■ Max temp: +70°C.

350MM AXIAL FAN INDUCED AIR FLOW Part No.

Blade Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-A4E350-AA10-32

353mm

130

230

1400

0.55

$425.00

Technical Features: ■■ Blades: Sheet steel coated in black. ■■ Counter clockwise looking at rotor side. ■■ Protection: IP44. ■■ Insulation: Class B. ■■ Overload protection internally wired. ■■ Capacitor: 4 MFD. ■■ Air flow: Form V. ■■ Wiring diagram: A1. ■■ Min temperature: -40°C. ■■ Max temperature: +55°C.

Airflow Direction: A=Forced V=Induced

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

100

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Papst Axial Fans 400-450mm

FANS & BLOWERS

400MM AXIAL FAN INDUCED AIR FLOW 3PH 2 SPEED Part No.

Blade Diameter

Input watts

Volts

130-A4D400-AP16-20

392mm

170/115

400

Current Amps

50 1440/1300 0.53/0.21

Code

List Price

$475.00

Technical Features: Blades: Sheet steel coated in black. ■ Counter clockwise looking at rotor side. ■ Protection: IP44. ■ Insulation: Class F. ■ Overload protection brought out. ■ Air Flow: V. ■ Wiring diagram: F1a/F2a. ■ Min temperature: -25°C. ■ Max temperature: +55°C (+85°C in star connection). ■

Airflow Direction: A=Forced V=Induced

450MM AXIAL FAN INDUCED AIRFLOW Part No.

Blade Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-A6E450-AQ05-11

450

155

230

910

0.7

$495.00

Technical Features: ■ Blades: Sheet steel coated in black. ■ Counter clockwise looking at rotor side. ■ Protection: IP44. ■ Insulation: Class F. ■ Overload protection bought out.

Airflow Direction: A=Forced V=Induced

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

101

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Basket Grill Axial Fans 200-250mm

FANS & BLOWERS

BASKET GRILL AXIAL FAN 200MM Part No.

130-K2M200-30A

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

200mm

230

0.2

2650

$173.00

130-K2M200-30F

200mm

230

0.2

2650

$173.00

130-K2T200-30A

200mm

400

0.1

2560

$173.00

130-K2T200-30F

200mm

400

0.1

2560

$173.00

n n n

Suitable for forced motor cooling fan. IP44. Temp -30/+60° 120

100

80 Pa

200mm 2pole

200

400

600

800

1000

M3/h

BASKET GRILL AXIAL FAN 250MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K2M250-30A

250

230

0.43

2600

$182.00

130-K2M250-30F

250

230

0.43

2600

$182.00

130-K2T250-30A

250

400

0.15

2450

$182.00

130-K2T250-30F

250

400

0.15

2450

$182.00

130-K4M250-30A

250

230

0.25

1400

$182.00

130-K4M250-30F

250

230

0.25

1400

$182.00

n n

Suitable for forced motor cooling fan. IP44. 250 mm 140

120

100

250mm 2pole

60 250mm 4pole

200

400

600

800

1000

1200

1400

1600

M3/h

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

102

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Basket Grill Axial Fans 300-315mm

FANS & BLOWERS

BASKET GRILL AXIAL FAN 300MM Part No.

130-K2M300-30A



Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

300mm

110

230

0.5

2500

$203.00

130-K2M300-30F

300mm

110

230

0.5

2500

$203.00

130-K2T300-30F

300mm

110

400

0.19

2500

$203.00

130-K4M300-30A

300mm

230

0.42

1350

$203.00

130-K4M300-30F

300mm

230

0.42

1350

$203.00

130-K4M300-30AS*

300mm

230

0.42

1350

$203.00

130-K4T300-30A

300mm

400

0.25

1400

$203.00

130-K4M300-30FS*

300mm

230

0.42

1400

$203.00

IP44.

 POPULAR MODELS - CONTACT US FOR TRADE SPECIAL QUANTITY PRICING 300 mm 120

100

80 300mm 2pole

*Square blade type

300mm 4pole 40

400

800

1200

1600

M3/h

2000

2400

BASKET GRILL AXIAL FAN 315MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K4M315-30A

315

230

0.42

1350

$209.00

130-K4M315-30F

315

230

0.42

1350

$209.00

1600

2000

IP44.

120

100

80 Pa

60 315mm 4pole 40

400

800

M3/h

1200

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

103

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Basket Grill Axial Fans 330-350mm

FANS & BLOWERS

BASKET GRILL AXIAL FAN 330MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K4M330-30A

330mm

117

230

0.53

1350

$231.00

130-K4M330-30F

330mm

117

230

0.53

1350

$231.00

IP44.

180 165 150 135 120 K4M330

105 Pa

90 75 60 45 30

15 0 0

350

700

1050

1400

M3/h

1750

2100

BASKET GRILL AXIAL FAN 350MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K4M350-30A

350mm

135

230

0.6

1380

$203.00

130-K4M350-37A

350mm

170

230

0.77

1380

$245.00

130-K4M350-30F

350mm

135

230

0.6

1380

$203.00

130-K4T350-30A

350mm

135

400

0.3

1360

$203.00

130-K4T350-30F

350mm

135

400

0.3

1360

$203.00

130-K6M350-30A

350mm

230

0.4

950

$215.00

IP54

120

100

80 350mm 4pole -37 Pa 60

350mm 4pole -30 40 350mm 6pole 20

600

1200

1800

M3/h

2400

3000

3600

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

104

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Basket Grill Axial Fans 400-450mm

FANS & BLOWERS

BASKET GRILL AXIAL FAN 400MM Part No.

Blade diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K4M400-30A

400mm

190

230

0.90

1350

$340.00

130-K4M400-30F

400mm

190

230

0.90

1350

$340.00

130-K4T400-30A

400mm

190

400

0.50

1370

$355.00

130-K4T400-30F

400mm

190

400

0.50

1370

$355.00

130-K6M400-30A

400mm

110

230

0.50

950

$355.00

130-K6M400-30F

400mm

110

230

0.50

950

$355.00

130-K4M400-37A

400mm

230

1.07

1350

$385.00

IP54.

120 110 100 90 80

400mm 4pole -37

70 60

400mm 4pole -30

50 40 400mm 6pole

30 20 10 0

800

1600

2400

3200

M3/h

4000

4800

BASKET GRILL AXIAL FAN 450MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K4M450-30A

450mm

250

230

1.15

1350

$415.00

130-K4M450-30F

450mm

250

230

1.15

1350

$415.00

130-K4T450-30A

450mm

250

400

0.55

1380

$425.00

130-K4T450-30F

450mm

250

400

0.55

1380

$425.00

130-K6M450-30A

450mm

135

230

0.65

920

$425.00

130-K6M450-30F

450mm

135

230

0.65

920

$425.00

140

120

100

80 450mm 4pole -30

40 450mm 6pole 20

1000

2000

3000

M3/h

4000

5000

6000

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

105

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Basket Grill Axial Fans 500-600mm

FANS & BLOWERS

BASKET GRILL AXIAL FAN 500MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K4M500-30A

500mm

420

230

2.0

1320

$475.00

130-K4M500-30F

500mm

420

230

2.0

1320

$475.00

130-K4M500-37A

500mm

800

230

3.8

1380

$610.00

130-K4T500-37A

500mm

850

400

1.6

1380

$610.00

130-K4T500-37F

500mm

850

400

1.6

1380

$610.00

130-K6M500-30A

500mm

220

230

1.1

900

$520.00

130-K6M500-30F

500mm

220

230

1.1

900

$520.00

130-K6T500-30A

500mm

220

400

0.62

900

$520.00

IP54.

140

120

100

80 500mm 4pole -37

60 500mm 4pole -30 40 500mm 6pole 20

2000

4000

M3/h

6000

8000

10000

BASKET GRILL AXIAL FAN 550MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K4M550-30A

550mm

550

230

2.5

1320

$545.00

130-K6M550-30A

550mm

320

230

2.0

900

$545.00

IP54.

140

120

100

80 550mm 4pole

60 550mm 6pole 40

2000

4000

M3/h

6000

8000

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

106

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Basket Grill Axial Fans 630mm

FANS & BLOWERS

BASKET GRILL AXIAL FAN 600MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K4M600-30A

600mm

800

230

3.8

1380

$610.00

130-K4T600-30A

600mm

800

400

1.5

1350

$620.00

130-K6M600-30A

600mm

500

230

2.4

910

$620.00

Code

List Price

IP54.

160 140 120 100

600mm 4pole

80 60 600mm 6pole 40 20 0

2000

4000

6000

M3/h

8000

10000

BASKET GRILL AXIAL FAN 630MM Blade Diameter

Input watts

130-K4T630-30A

630mm

850

130-K6M630-30A

630mm

520

130-K6M630-30F

630mm

520

130-K6T630-30A

630mm

550

Part No.

Air Flow Direction

Current Amps

Speed RPM

400

1.6

1350

$625.00

230

2.5

900

$625.00

230

2.4

910

$625.00

400

1.4

900

$625.00

Volts

IP54.

180 160 140 120 100 Pa

630mm 4pole -30 80 60 630mm 6pole -30 40 20 0

2000

4000

6000

8000

10000

12000

M3/h

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

107

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

EBM Papst Basket Grill Axial Fans 170 & 300mm

170MM FLAT GRILL STRAIGHT BLADES Part No.

Blade Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-S2D170-BA04-06

170

230/400

50/60

2710

0.23/0.12

$470.00

Code

List Price

$310.00

Technical Features: ■■ AC axial fan with straight blades. ■■ Nominal voltage range: 230/400 r / Y, 50/60Hz. ■■ Blade material: Die cast aluminium. ■■ IP54 protection, Class F insulation. ■■ Wiring diagram: C2. ■■ Min temperature: -25ºC. Max temperature: +75ºC. ■■ Airflow: V.

Airflow Direction: A=Forced V=Induced

300MM BASKET GRILL HYBLADE Part No.

130-S4E300-AB03-43

Blade Input Volts Ph Hz Diameter watts

300

240

1 50

Volume M3/H

Speed RPM

1660

1270

Current Type Amps

0.29

Technical Features: ■■ AC axial fan with Hyblade sickle blades. ■■ Nominal voltage range: 220-240, 50/60Hz. ■■ Blade material: Sheet steel, coated in black. ■■ IP44 Protection(depending on installation position), Class B insulation. ■■ Thermal overload protection wired internally. ■■ Wiring diagram: A1. ■■ Min temperature: -40ºC. Max temperature: +65ºC. ■■ Airflow: A. ■■ Capacitor: 1.5.

Airflow Direction: A=Forced V=Induced

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

108

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

EBM Papst Basket Grill Axial Fans 300mm

300MM BASKET GRILL HYBLADE Part No.

130-S4E300-AS72-44

Blade Input Volts Ph Hz Volume Speed Diameter watts RPM M3H

300

230

1800

1320

Current Amps

Type

Code

List Price

0.32

$299.00

344

Technical Features: ■■ AC axial fan with Hyblade sickled blades. ■■ Nominal voltage range: 230, 50/60Hz. ■■ Blade material: Press-fitted sheet steel blank, sprayed with PP plastic. ■■ IP44 protection(depending on installation position), class B insulation. ■■ Thermal overload protection wired internally. ■■ Wiring diagram: A1. ■■ Min temperature: -25ºC. Max temperature: +60ºC. ■■ Airflow: V. ■■ Capacitor: 2.0.

Airflow Direction: A=Forced V=Induced

20 23

300MM BASKET GRILL EC TYPE HYBLADE Part No.

130-S3G300-AK13-58

Blade Input Diameter watts

300

Ph Hz

Volume M3H

Speed Current Type Code RPM Amps

List Price

200-240 1 50

2265

1650

$430.00

Volts

0.74

Technical Features: ■■ EC axial fan with Hyblade sickled blades. ■■ Nominal voltage range: 200….240 , 50/60Hz. ■■ Blade material: PP plastic. ■■ IP54 protection, class B insulation. ■■ EC drive output: 10 V DC, max. 1.1mA. ■■ Motor current limit, soft start, control input 0-10V DC /PWM. ■■ Control interface with SELV potential safely disconnected from the mains. ■■ Over-temperature protected electronics / motor. ■■ Wiring diagram: A1. ■■ Min temperature: -40ºC. Max temperature: +60ºC. ■■ Airflow: A. ■■ Capacitor: 1.5.

GREEN TECH

✓

Airflow Direction: A=Forced V=Induced

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

109

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

EBM Papst Basket Grill Axial Fans 350mm

350MM BASKET GRILL - HYBLADE Part No.

130-S4E350-AN02-60

Blade Input Volts Ph Hz Volume Diameter watts M3H

350

165

230

3305

Speed RPM

1400

Current Type Amps

0.73

Code

List Price

$485.00

Code

List Price

$810.00

Technical Features: ■ AC axial fan with HyBlade sickled blades. ■ Nominal voltage range: 230, 50/60Hz. ■ Blade material: Press-fitted sheet steel blank, sprayed with PP plastic. ■ IP44 Protection(depending on installation position), Class B insulation. ■ Thermal overload protection wired internally. ■ Wiring diagram: A1. ■ Min temperature: -25ºC. Max temperature: +65ºC. ■ Airflow: V. ■ Capacitor: 4.0.

Airflow Direction: A=Forced V=Induced

350MM BASKET GRILL - HYBLADE Part No.

130-S3G350-AP01-60

Blade Input Volts Ph Hz Volume Diameter watts M3H

350

165

230

3305

Speed RPM

1475

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

110

Current Type Amps

1.35

GREEN TECH

✓

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

EBM Papst Basket Grill Axial Fans 400 - 450mm

400MM BASKET GRILL Part No.

Blade Input Diameter watts

130-S4E400-AP02-44

400

160

Volts

230

Ph Hz

Volume M3H

Speed RPM

Current Amps

Type

Code

List Price

4235

1430

0.73

$551.00

Technical Features: AC axial fan with sickled blades. ■ Nominal voltage range: 230, 50/60Hz. ■ Blade material: Sheet steel blank coated in black. ■ IP44 Protection(depending on installation position), class F insulation. ■ Thermal overload protection wired internally. ■ Wiring diagram: A1. ■ Min temperature: -20ºC. Max temperature: +60ºC. ■ Airflow: V. ■ Capacitor: 6. ■

Airflow Direction: A=Forced V=Induced

450MM BASKET GRILL Part No.

Blade Input Diameter watts

Volts Ph Hz Volume Speed Current Type M3H RPM Amps

Code

List Price

130-S4E450-AU03-37

450

350

230

5770

1300

1.55

$558.00

130-S4D450-AN14-01

450

460

400

5770

1330

0.95

$558.00

Technical Features: ■ AC axial fan with sickled blades. ■ Blade material: Press-fitted sheet steel blank, sprayed with PP plastic. ■ IP54 protection, class F insulation. ■ Thermal overload protection wired internally. Single phase only. ■ Wiring diagram: A1. ■ Min temperature: -40 ºC. Max temperature: +55 ºC. ■ Airflow: V. ■ Capacitor: 8.

Airflow Direction: A=Forced V=Induced

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

111

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

EBM Papst Basket Grill Axials 500-560mm

500MM BASKET GRILL - HYBLADE Part No.

Blade Input Volts Ph Hz Volume Speed RPM Diameter watts M3H

130-S4E500-AM03-01

500

680

230

8905

130-S4D500-AM03-01

500

720

400

9195

1300

Current Amps

3.0

1390/1180 1.4/0.95

Type Code

List Price

$630.00

$652.00

Technical Features: AC axial fan with sickled blades. ■ Nominal voltage range: 230, 50/60Hz. ■ Blade material: Press-fitted sheet steel blank, sprayed with PP plastic. ■ IP54 protection, class F insulation. ■ Thermal overload protector, brought out. ■ Capacitor: 12 mfd (S4-S4E500-AM03-01). ■ Airflow: V. ■ Wiring diagram: A2b. ■ Max temperature: +40 ºC. ■ Min temperature: -40 ºC. ■

Airflow Direction: A=Forced V=Induced

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

112

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

EBM Papst Basket Grill Axials 630mm

630MM BASKET GRILL HYBLADE Part No.

Blade Input Volts Diameter watts

Volume M3H

Speed Current RPM Amps

Type

Code

List Price

130-S6E630-AN01-01

630

600

230

11020

925

2.62

$845.00

130-S6D630-AN01-01

630

600

400

11270

930

1.2

$845.00

Technical Features: ■ AC axial fan with Hyblade sickled blades. ■ Blade material: Press-fitted sheet steel blank, sprayed with PP plastic. ■ IP54 protection, class F insulation. ■ Thermal overload protection brought out (see wiring diagram). ■ Capacitor: 14 mfd (S6E630-AN01-01). ■ Airflow: V. ■ Wiring diagram: A2b, F1b (S6D630-AN01-01). ■ Max temperature: +55ºC, +65ºC (S6D630-AN01-01). ■ Min temperature: -40ºC.

Airflow Direction: A=Forced V=Induced

630MM BASKET GRILL Part No.

Blade Diameter

Input watts

Volts

130-S4D630-AR01-01

630

1250

400

Volume M3H

Speed RPM

Current Amps

50 13830

1330

2.48

Type Code

List Price

$895.00

Technical Features: ■ AC axial fan with sickled blades. ■ Blade material: Aluminium sheet insert, sprayed with PP plastic. ■ IP54 protection, class F insulation. ■ Thermal overload protection brought out (see wiring diagram). ■ Airflow: V. ■ Wiring diagram: F1b. ■ Max temperature: -55 ºC. ■ Min temperature: -40 ºC.

Airflow Direction: A=Forced V=Induced

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

113

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MiniBlaze EBM Papst& Basket Blazemaster Grill Axials - Loncin 710mm Engine

FANS & BLOWERS

710MM BASKET GRILL HYBLADE Part No.

Blade Input Volts Diameter watts

Volume M3H

Speed Current Type RPM Amps

Code

List Price

130-S6D710-AQ01-01

710

840

400

14425

880

1.74

$1420.00

130-S6E710-AR03-01

710

630

230

14425

900

2.79

$1622.00

Technical Features: AC axial fan with Hyblade sickled blades. ■ Blade material: Press-fitted sheet steel blank, sprayed with PP plastic. ■ IP54 protection, class F insulation. ■ Thermal overload protection brought out. ■ Airflow: V. ■ Max temperature: +50ºC. ■ Min temperature: -40ºC. ■

Airflow Direction: A=Forced V=Induced

EBM AXIAL FAN MODEL DECODER 1

‘A’ bare fan & motor, ‘S’ with wire grille flat or basket, W with square or round plate

Number of poles (speed) 2, 4, 6 or 8 (in the case of EC products (1 or 3 core) it is not representative of speed

Motor type (S = shaded pole, D = 3-phase, E =1 phase, G = EC) Impeller diameter

Fan & Motor configeration

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

114

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Square Plate Axial Fans 200-300mm

FANS & BLOWERS

SQUARE PLATE AXIAL FAN RECESSED TYPE 250MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K2M250-30FPF

250

230

130-K2M250-30APF

250

230

0.43

2480

$215.00

0.43

2480

$215.00

130-K4M250-30APF

250

230

0.25

1400

$215.00

130-K4M250-30FPF

250

230

0.25

1400

$215.00

Current Amps

Speed RPM

Code

List Price

IP44.

250 mm 140

120

100

250mm 2pole

60 250mm 4pole

200

400

600

800

1000

1200

1400

1600

M3/h

SQUARE PLATE AXIAL FAN RECESSED TYPE 300MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

130-K4M300-30APF

300

230

0.42

1350

$265.00

130-K4M300-30FPF

300

230

0.42

1350

$265.00

IP44.

300 mm 120

100

80 300mm 2pole Pa

60 300mm 4pole 40

400

800

1200

M3/h

1600

2000

2400

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

115

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Square Plate Axial Fans 350-400mm

FANS & BLOWERS

SQUARE PLATE AXIAL FAN RECESSED TYPE 350MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K4M350-30APF

350

135

230

0.6

1380

$360.00

130-K4M350-30FPF

350

135

230

0.6

1400

$360.00

IP54.

120

100

80 350mm 4pole -37 Pa

60 350mm 4pole -30 40 350mm 6pole 20

600

1200

1800

2400

M3/h

3000

3600

SQUARE PLATE AXIAL FAN RECESSED TYPE 400MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K4M400-30APF

400

190

230

0.90

1350

$395.00

130-K4M400-30FPF

400

190

230

0.90

1350

$395.00

130-K4T400-30APF

400

190

400

0.50

1350

$395.00

130-K4T400-30FPF

400

190

400

0.50

1350

$395.00

IP54.

120 110 100 90 80

400mm 4pole -37

70 Pa

400mm 4pole -30

50 40 400mm 6pole

30 20 10 0

800

1600

2400

M3/h

3200

4000

4800

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

116

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Square Plate Axial Fans 450-500mm

FANS & BLOWERS

SQUARE PLATE AXIAL FAN RECESSED TYPE 450MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K4M450-30APF

450

250

230

1.15

1350

$430.00

130-K4M450-30FPF

450

250

230

1.15

1350

$430.00

130-K4T450-30FPF

450

250

415

0.55

1380

$445.00

140

120

100

80 450mm 4pole -30

40 450mm 6pole 20

1000

2000

3000

4000

M3/h

5000

6000

SQUARE PLATE AXIAL FAN RECESSED TYPE 500MM Part No.

Blade Diameter

Input watts

Volts

Air Flow Direction

Current Amps

Speed RPM

Code

List Price

130-K4M500-30APF

500

420

230

2.0

1320

$485.00

130-K4M500-30FPF

500

420

230

2.0

1350

$485.00

130-K4T500-30APF

500

420

400

0.95

1350

$525.00

140

120

100

80 500mm 4pole -37

60 500mm 4pole -30 40 500mm 6pole 20

2000

4000

M3/h

6000

8000

10000

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

117

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Papst Square Plate Axial Fans Square Plate Axial Fans 500-630mm 500-630mm

FANS & BLOWERS

MOSSWYN AXIAL FAN SICKLE BLADE PLATE FAN 500MM Part No.

Blade Diameter

Input watts

Volts

Air Volume m3/H

Speed RPM

Current Amps

Code

List Price

130-K4M500-37APF

500

800

230

8500

1380

3.8

$670.00

130-K4T500-37APF

500

850

400

8500

1380

1.6

$670.00

130-K4T500-37FPF

500

850

400

7500

1380

1.6

$670.00

Technical Features: ■ ■ ■ ■ ■ ■ n

AC axial fan with sickled blades. Blade material: Press fitted sheet steel. IP54 protection, class F insulation. Thermal overload protector. Min temperature: -30 ºC. Max temperature: +60 ºC. IP54. 140

120

100

80 500mm 4pole -37

60 500mm 4pole -30 40 500mm 6pole 20

2000

4000

M3/h

6000

8000

10000

MOSSWYN AXIAL FAN SICKLE BLADE PLATE FAN 630MM Part No.

Blade Diameter

Input watts

Volts

Air Volume m3/H

Speed RPM

Current Amps

Code

List Price

130-K4T630-37APF

630

1400

400

14500

1400

2.5

$975.00

130-K6T630-37APF

630

900

400

13500

900

2.0

$1150.00

Technical Features: ■ ■ ■ ■ ■ ■ ■ ■

AC axial fan with sickled blades. Two Speed: K4T630: 400v ∆ 1350rpm, Y 1100rpm. K6T630: 400v ∆ 900rpm, Y ∆ 700rpm. Blade material: Press fitted sheet steel. IP54 protection, class F insulation. Thermal overload protector. Min temperature: -30 ºC. Max temperature: +60 ºC. IP54. 180 160 140 630mm 4pole -37(H) 120 630mm 4pole -37(L)

100 80 60 630mm 6pole -37(H) 40 630mm 6pole -37(L) 20 0

2000

4000

6000

8000

10000

12000

14000

16000

M3/h

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

118

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Square Plate Axial Fans 710-800mm

FANS & BLOWERS

MOSSWYN AXIAL FAN SICKLE BLADE PLATE FAN 710MM Part No.

Blade Diameter

Input watts

Volts

Air Volume m3/H

Speed RPM

Current Amps

Code

List Price

710

1100

415

17400

900

3.2

$1250.00

130-K6T710-37APF Technical Features: ■ ■ ■ ■ ■ ■ ■ ■

AC axial fan with sickled blades. Two Speed: K6T710: 400v ∆ 900rpm, Y 600rpm. Blade material: Press fitted sheet steel. IP54 protection, class F insulation. Thermal overload protector. Min temperature: -30 ºC. Max temperature: +60 ºC. IP54. 180 160 140 120 100 710mm 6pole -37(H)

80 60 710mm 6pole -37(L) 40 20 0

2000

4000

6000

8000

M3/h

10000

12000

14000

16000

18000

MOSSWYN AXIAL FAN SICKLE BLADE PLATE FAN 800MM Part No.

Blade Diameter

Input watts

Volts

Air Volume m3/H

Speed RPM

Current Amps

Code

List Price

800

1400

400

25000

900

3.2

$1500.00

130-K6T800-37APF Technical Features: ■ ■ ■ ■ ■ ■ ■ ■

AC axial fan with sickled blades. Two Speed 400v ∆ 900rpm, Y 700rpm. Blade material: Press fitted sheet steel. IP54 protection, class F insulation. Thermal overload protector. Min temperature: -30 ºC. Max temperature: +60 ºC. IP54. 180 160 140 120 100 800mm 6pole -37(H)

80 60 800mm 6pole -37(L) 40 20 0

4000

8000

12000

M3/h

16000

20000

24000

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

119

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Papst Square Plate Axial Fans Square Plate Axial Fans 900mm 500-630mm

FANS & BLOWERS

MOSSWYN AXIAL FAN SICKLE BLADE PLATE FAN 900MM Part No.

Blade Diameter

Input watts

Volts Ph

Air Volume m3/H

Speed RPM

Current Amps

Code

List Price

130-K6T900-37APF

900

2000

400

27000

900

4.00

$1850.00

Technical Features: ■ ■ ■ ■ ■ ■ ■ ■

AC axial fan with sickled blades. Two Speed 400v ∆ 900rpm, Y 750rpm. Blade material: Press fitted sheet steel. IP54 protection, class F insulation. Thermal overload protector. Min temperature: -30 ºC. Max temperature: +60 ºC. IP54. 180 160 140 120 100 900mm 6pole -37(H)

80 60 900mm 6pole-37(L) 40 20 0

4000

8000

12000

M3/h

16000

20000

24000

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

28000

120

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Papst Square Plate Axial Fans 500-630mm

FANS & BLOWERS

500MM SQUARE PLATE AXIAL HYBLADE Part No.

130-W4D500-GJ03-11

Blade Diameter

Input watts

Volts

Air Volume m3/H

Speed RPM

Current Amps

Code

List Price

500

710

400

9030

1395

1.4

$950.00

Technical Features: ■ ■ ■ ■ ■ ■ ■ ■ ■

AC axial fan with Hyblade sickled blades. Connection: 400v ∆1340rpm, 400v Y 1060rpm. Blade material: Press fitted sheet steel sprayed with PP plastic. IP54 protection, class F insulation. Thermal overload protector (TOP) brought out (see wiring diagram). Wiring diagram: F1b. Airflow: V. Min temperature: -40 ºC. Max temperature: +60 ºC.

Airflow Direction: A=Forced V=Induced

630MM SQUARE PLATE AXIAL HYBLADE Part No.

Blade Diameter

Input watts

Volts

Air Volume m3/H

Speed RPM

Current Amps

Code

List Price

130-W4D630-GD01-01

630

2630

400

19890

1320

4.78

$1680.00

Technical Features: AC axial fan with Hyblade sickled blades. ■ Two Speed: 400v ∆ 1320rpm, 400v Y 1050rpm. ■ Blade material: Aluminium sheet insert, sprayed with PP plastic. ■ IP54 protection, class F insulation. ■ Thermal overload protector (TOP) brought out (see wiring diagram). ■ Wiring diagram: F1b. ■ Airflow: V. ■ Min temperature: -40 ºC. ■ Max temperature: +60 ºC. ■

Airflow Direction: A=Forced V=Induced

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

121

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Papst Square Plate Axial Fans 710mm-800mm

FANS & BLOWERS

710MM SQUARE PLATE AXIAL HYBLADE Part No.

Blade Diameter

Input watts

Volts

130-W6D710-GH01-01

710

1030

400

Air Volume Speed Current Code RPM Amps m3/H 16080

List Price

905

2.35

$1750.00

Technical Features: ■ AC axial fan with Hyblade sickled blades. ■ Two Speed: 400v ∆ 905rpm, 400v Y 730rpm. ■ Blade material: Aluminium sheet insert, sprayed with PP plastic. ■ IP54 protection, class F insulation. ■ Thermal overload protector (TOP) brought out (see wiring diagram). ■ Wiring diagram: F1b. ■ Airflow: V. ■ Min temperature: -40 ºC. ■ Max temperature: +60 ºC.

Airflow Direction: A=Forced V=Induced

800MM SQUARE PLATE AXIAL HYBLADE Part No.

Blade Diameter

Input watts

Volts

Air Volume m3/H

Speed RPM

Current Amps

Code

List Price

130-W6D800-KG13-01

800

1430

400

23030

870

2.8

$2075.00

Technical Features: ■ AC axial fan with Hyblade sickled blades. ■ Connection: 400v ∆ 880rpm, 400v Y 670rpm. ■ Blade material: Press fitted sheet Steel sprayed with PP plastic. ■ IP54 protection, class F insulation. ■ Thermal overload protector (TOP) brought out (see wiring diagram). ■ Wiring diagram: F1b. ■ Airflow: V. ■ Min temperature: -40 ºC. ■ Max temperature: +60 ºC.

Airflow Direction: A=Forced V=Induced

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

122

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Papst Square Plate Axial 800mm

FANS & BLOWERS

800 MM SQUARE PLATE AXIAL HYBLADE – 8 POLE Part No.

Blade Diameter

Input watts

Volts

130-W8D800-KG11-01

800

730

400

Air Volume Speed m3/H RPM

17890

680

Current Amps

Code

List Price

2.0

$1985.00

Technical Features: ■ AC axial fan with HyBlade sickled blades. ■ Two Speed: 400v ∆ 660rpm, 400v Y 485rpm. ■ Blade material: Aluminium sheet insert, sprayed with PP plastic. ■ IP54 protection, class F insulation. ■ Thermal overload protector (TOP) brought out (see wiring diagram). ■ Wiring diagram: F1b. ■ Airflow: V. ■ Min temperature: -40 ºC. ■ Max temperature: +70 ºC.

Airflow Direction: A=Forced V=Induced

800MM SQUARE PLATE EC AXIAL HYBLADE Part No.

W3G800-GV01-01

Blade Diameter

800

Input Volts Ph watts

Air Volume m3/H

Speed RPM

Current Amps

Code

List Price

2900 400

29510

1080

4.4

$3550.00

Technical Features: ■ EC axial fan with Hyblade sickled blades. ■ Nominal voltage range:380…480, 50/60Hz. ■ Blade material: Aluminium sheet insert, sprayed with PP plastic. ■ IP54 protection, class F insulation. ■ 10/20VDC output, 0-10 v input or 4-20mA, alarm relay, soft start. ■ Over temperature protection line voltage /phase failure detection. ■ Locked rotor and reverse polarity protection. ■ Airflow: V. ■ Min temperature: -25 ºC. ■ Max temperature: +65 ºC.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

GREEN TECH

✓

123

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Ziehl Abegg Axial Plate Fans 500-630mm

FANS & BLOWERS

500MM SQUARE PLATE AXIAL - 1PH

Technical Features: ■ Motor type: AC. ■ Rated voltage: 230v +/-10%. ■ Electrical connection: Terminal box. ■ Protection class: IP54. ■ Motor protection: Thermal contact. ■ Blades: Aluminum. ■ Rotor: Aluminum. ■ Capacitor: 16mfd. ■ Airflow: V. ■ Start amps: 6.5. ■ Min temperature: -25 ºC. ■ Max temperature: +70 ºC.

Ø540

150

130-FN050-VDQ.4I.V7

500mm

Technical Features: ■ Motor type: AC. ■ Rated voltage: 3~ 400v (∆/Y) +/-10%. ■ Electrical connection: Terminal box. ■ Protection class: IP54. ■ Motor protection: Thermal contact. ■ Blades: Aluminum. ■ Rotor: Aluminum. ■ Airflow: V. ■ Start amps: 4.7/1.55. ■ Min temperature: -40 ºC. ■ Max temperature: +70 ºC.

$1175.00

Ø9

560

Airflow Direction: A=Forced V=Induced

Input Volts Ph Hz Air Volume KW m3/H

0.84/ 400 0.54

3.3

9600

Ø540

150

Speed RPM

Current Amps

Code

List Price

$1150.00

1340/940 1.45/0.96

600

Blade Diameter

1230

220

500MM SQUARE PLATE AXIAL - 3PH 2 SPEED Part No.

8800

600

230

L-KL-2756-26

0.76

List Price

Ø9

220

L-KL-2756-26

500mm

Ø580

130-FN050-4EQ.4I.V7

Blade Input Volts Ph Hz Air Volume Speed Current Type Code Diameter Kw m3/H RPM Amps

Ø580

Part No.

560

Airflow Direction: A=Forced V=Induced

630MM SQUARE PLATE AXIAL - 3PH 2 SPEED

2.8/ 1.75

Technical Features: Motor type: AC. ■ Rated voltage: 3~ 400v (/Y) +/-10%. ■ Electrical connection: Terminal box. ■ Protection class: IP54. ■ Motor protection: Thermal contact. ■ Blades: Aluminum. ■ Rotor: Aluminum. ■ Airflow: V. ■ Start amps: 16/5.5. ■ Min temperature: -40 ºC. ■ Max temperature: +60 ºC.

400

Speed RPM

Current Amps

Code

List Price

21000

1320/1010

5/2.9

$1950.00

240

Ø699

■

805

630mm

Air Volume m3/H

Ø 11

271

Airflow Direction: A=Forced V=Induced Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

124

750

L-KL-2756-26

130-FN063-VDQ.6N.V7

Blade Input Volts Ph Hz Diameter KW

Ø696

Part No.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Ziehl Abegg Axial Plate Fans 800mm

FANS & BLOWERS

800MM SQUARE PLATE AXIAL – 3PH 6 POLE Part No.

Blade Diameter

130-FN080-SDQ-6N.V7

800mm

Input Volts Ph Hz KW

2.0/ 1.25

400

Technical Features: Motor type: AC. ■ Rated voltage: 400v ∆/Y +/-10%. ■ Electrical connection: Terminal box. ■ Protection class: IP54. ■ Motor protection: Thermal contact. ■ Blades: Aluminum. ■ Rotor: Aluminum. ■ Airflow: V. ■ Wiring diagram: 108XA. ■ Temperature: 50 ºC.

Air Volume m3/H

Speed RPM

Current Amps

Code

List Price

25500

880/ 660

4.0/2.3

$2250.00

■

283

858

970

910

14.5 Airflow Direction: A=Forced V=Induced

910

AXIAL FAN MODEL DECODER

■

Axial Fan

Pattern (A = bare fan, K = basket grille, Q = wall plate)

Fan series

Motor group (size)

Fan size (cm)

Number of poles

power supply (D = 3 phase, E = 1 phase, G = D.C.,K = electronic) 10

■

Motor length & details Direction of flow Blade angle

Contact Argon Distributors if you have different model numbers, and we will help with selection See motor Controllers page 71

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

125

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Inline Axial Fans 200 & 300mm

FANS & BLOWERS

200MM - INLINE AXIAL Part No.

Blade Diameter

Input watts

Volts

Amps

Speed RPM

Code

List price

200

230

0.2

2650

$220.00

130-K2M200-30IR IP44.

■

16 9

120

100

80 Pa

200mm 2pole

200

400

600

800

1000

Blade Diameter

Input watts

Volts

Amps

Speed RPM

Code

List price

300

230

0.42

1350

$278.00

M3/h

300MM - INLINE AXIAL Part No.

130-K4M300-30IR ■

IP44.

300 mm 120

100

80 300mm 2pole Pa

60 300mm 4pole 40

400

800

1200

M3/h

1600

2000

2400

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

126

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Inline Axial Fans 350 & 400mm

FANS & BLOWERS

350MM - INLINE AXIAL Part No.

Blade Diameter

Input watts

Volts

Amps

Speed RPM

Code

List price

350

170

230

0.77

1380

$367.00

130-K4M350-37IR IP54.

■

120

100

80 350mm 4pole -37 Pa

60 350mm 4pole -30 40 350mm 6pole 20

600

1200

1800

M3/h

2400

3000

3600

400MM - INLINE AXIAL Part No.

Blade Diameter

Input watts

Volts

Amps

Speed RPM

Code

List price

130-K4M400-37IR

400

230

1.07

1350

$450.00

120 110 100 90 80

400mm 4pole -37

70 Pa

400mm 4pole -30

50 40 400mm 6pole

30 20 10 0

800

1600

2400

M3/h

3200

4000

4800

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

127

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Inline Axial Fans 450 & 500mm

FANS & BLOWERS

450MM - INLINE AXIAL Part No.

Blade Diameter

Input watts

Volts

Amps

Speed RPM

Code

List price

130-K4M450-37IR

450

300

230

1.36

1350

$567.00

■

IP54.

140

120

100

80 450mm 4pole -30

40 450mm 6pole 20

1000

2000

3000

4000

M3/h

5000

6000

500MM - INLINE AXIAL Part No.

130-K4M500-37IR ■

Blade Diameter

Input watts

Volts

Amps

Speed RPM

Code

List price

500

800

230

3.80

1380

$640.00

IP54.

140

120

100

80 500mm 4pole -37

60 500mm 4pole -30 40 500mm 6pole 20

2000

4000

M3/h

6000

8000

10000

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

128

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Inline Axial Fans 600mm

FANS & BLOWERS

600MM - INLINE AXIAL Part No.

Blade Diameter

Input watts

Volts

Amps

Speed RPM

Code

List price

600

500

230

2.4

910

$620.00

130-K6M600-30IR ■

IP54.

160 140 120 100 600mm 4pole

60 600mm 6pole 40 20 0

2000

4000

M3/h

6000

8000

10000

630MM - INLINE AXIAL Part No.

Blade Diameter

Input watts

Volts

Amps

Speed RPM

Code

List price

630

550

400

1.4

910

$695.00

130-K6T630-30IR

180 160 140 120 100 Pa

630mm 4pole -30 80 60 630mm 6pole -30 40 20 0

2000

4000

6000

8000

10000

12000

M3/h

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

129

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Mosswyn Backward Curve Fans

FANS & BLOWERS

BACKWARD CURVE CENTRIFUGAL FAN - 1PH 230V, 50/60HZ Part No.

DIA (mm)

Rated Current

Input Power (w)

RPM

(m3/min)

130-BA2V190-69

190

0.27

130-BA2V220-71

220

0.38

130-BA2V225-69

225

130-BA2V225-85 130-BA2V250-99

Airflow

Noise dB (A)

2490

9.7

2450

13.8

0.47

2600

225

0.55

113

250

0.68

151

Code

List Price

2uf 400V

$115.00

2uf 400V

$125.00

13.1

3uf 400V

$189.00

2600

16.7

3uf 400V

$200.00

2550

23.3

5UF 400V

$245.00

DIMENSIONS A

130-BA2V190-69

190

134

130-BA2V220-71

220

160

130-BA2V225-69

225

154

130-BA2V225-85

225

154

130-BA2V250-99

250

177

Technical data Impeller – Polyamide fibreglass reinforced. Motor – Capacitor run, external rotor (capacitor supplied). Bearing – Dual ball bearings, permanently lubricated. Operating voltage range – 185-245V AC. Insulation – Class B. Protection – Thermally protected (auto restart).

Static Pressure

M4 (M0.16)

2(0.08)

450±20 (17.7±0.79)

D BA2V220-71 - PERFORMANCE DATA

Pa In H2 O 2.00

600 550 500 450 400 350 300 250 200 150 100 50 0

1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 0 Air Flow 0

50 2

100 3

150 200 4 5 6

250 7

300 8

350 10

400 CFM 3 11 m/min

BA2V225-69, 225-85 - PERFORMANCE DATA

Air Flow

700

200

Static Pressure

600 2.50

300

BA2V225-85

1.50 BA2V225-69

1.00

0 0.00 0 0

100 2.5

150 200 250 5.0 7.5

CFM 300 350 400 450 500 550 600 15.0 10.0 12.5 m3/min

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

100 2.5

150 200 5.0

250 7.5

300 350 10.0

400 450 12.5

500 550 600 CFM 15.0 m3/min

130

3.5 3.0

600

2.5

500

2.0

400 300 200

100 0.50

Air Flow

In H 2O

800

400

0 0

BA2V250-99 - PERFORMANCE DATA

Pa In H2O 3.00

Static Pressure

2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00

700

500 2.00

6(0.24)

BA2V190-69 - PERFORMANCE DATA

500 450 400 350 300 250 200 150 100 50 0

Ø58 (Ø2.28)

2(0.08) 27 (1.06)

Part No.

Cap (mfd)

1.5 1.0

100

0.5

0.0

Air Flow

0 0

100

200 5

300 10

400

500 15

600

700 20

800 25

900

CFM m3/min

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Backward Curve Fans 133-180mm

FANS & BLOWERS

133MM BACKWARD CURVE FAN Part No.

Diameter

R2S133-AE17-05 130-R2S133-AE17-05 133mm

Input watts

Volts

230

Technical Features: ■ Impeller material: PA plastic 6, fiberglass reinforced. ■ Direction: Clockwise looking at rotor. ■ Protection: IP22. Product drawing ■ Insulation: Class B. ■ Maximum ambient temperature: 40°C. ■ Overload protection wired internally.

Speed RPM

AC1 centrifugal 50 2780 fan backward curved, single inlet

Current Amps

Code

List Price

0.25

$245.00

Code

List Price

$255.00

180MM BACKWARD CURVE FAN 1

Part No.2 3

Connection line PVC, 3x brass lead tips crimped AccessoryDiameter part: Inlet nozzle 09566-2-4013, not included in the standard of delivery Current Input Volts Ph Hz scope Speed Screw depth max. 5 mm

130-R2E180-CB28-09

watts

180mm

Connection screen

230

RPM

Amps

2550

0.28

AC centrifugal fan

Technical Features: R2E180-CB28-09 ■ Impeller material: PA plastic. ■ Direction: Clockwise looking at rotor. ■ Protection: IP44. ■ Insulation: Class B. ■ Overload protection wired internally. ■ Capacitor: 1.5mfd. Product drawing ■ Maximum ambient temperature: 40°C. L = blue ■ Minimum ambient temperature: -40°C. PE = green / yellow N

= brown

TOP

= Thermal overload protector

backward curved

Item no.: 10278-5-9980 · Revision: 66668 · Print-out: 2012-02-09 · Y. Uhlmann (VM-TDO) · Page 3 / 5 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 7938 81-0 · Fax +49 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com

Accessory part: Inlet nozzle 09576-2-4013, not included in the standard scope of delivery

Depth of screw max. 5 mm

Connection line PVC 4G 0.5 mm², 4x brass lead tips crimped

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Connection screen

131

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Backward Curve Fans 190-220mm

FANS & BLOWERS

190MM BACKWARD CURVE FAN Part No.

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-R2E190-RA26-51

190

230

2400

0.25

$155.00

Technical Features: ■ Impeller material: PP Plastic. ■ Direction: Clockwise looking at rotor. ■ Protection: IP44. ■ Insulation: Class B. ■ Overload protection wired internally. ■ Capacitor: 1.5mfd. ■ Maximum ambient temperature: 40°C.

220MM BACKWARD CURVE FAN Part No.

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-R2E220-RA38-01

220

230

2100

0.39

$215.00

Technical Features: ■ Impeller material: PA plastic. ■ Direction: Clockwise looking at rotor. ■ Protection: IP44. ■ Insulation: Class F. ■ Overload protection wired internally. ■ Capacitor: 2 mfd. ■ Maximum ambient temperature: 50°C.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

132

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MiniBlaze EBM Backward & Blazemaster fan 220mm - Loncin Engine

FANS & BLOWERS

220MM BACKWARD CURVE FAN Part No.

131-R3G220-RC05-03

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

220

230

2580

0.7

$530.00

Technical Features: ■ ■ ■ ■ ■

Protection: IP54. Insulation: Class B. Maximum temperature: +80°C. Minimum temperature: -40°C. Rotation: clockwise, seen on rotor

GREEN TECH

✓

225MM BACKWARD CURVE FAN Part No.

Diameter

131-R2E225-RA92-09 225 R2E225-BD92-09

Input watts

Volts

155

230

Current Amps

2500 0.68 AC centrifugal fan

Code

List Price

$320.00

backward curved, single inlet

Technical Features: ■ ■ ■ ■ ■

Speed RPM

Protection: IP44. Insulation: Class B. Product drawing Maximum temperature: +80°C. Minimum temperature: -40°C. Rotation: clockwise, seen on rotor

Connection line silicone, 4x brass lead tips crimped

Prices shown are excluding GST and withoutpart: notice. freight 96358-2-4013, charge may also Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz 2 may change Accessory InletAnozzle notapply. included in the standard 133 scope of delivery Website www.argondistributors.co.nz E&OE. For catalogue amendments and updates visit website.

Screw depth max. 5 mm

EBM Backward Curve Fans 250-280mm

FANS & BLOWERS

250MM BACKWARD CURVE FAN Part No.

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-R2E250-RA50-01

250

210

230

2500

0.93

$360.00

Technical Features: AC centrifugal fan R2E250-RA50-01 Impeller material: PA6 plastic, fiberglass reinforced. backward curved, single inlet Rotation: Clockwise looking at rotor. Protection: IP44. Insulation: Class F. Maximum temperature: +30°C. Product drawing Minimum temperature: -25°C. Overload protection: Wired internally. Capacitor: 5mfd.

■ ■ ■ ■ ■ ■ ■ ■

- RadiCal®

Accessory part: Inlet nozzle 96359-2-4013, not included in the standard scope of delivery

Connection line silicone 4G 0.5 mm², 4 x brass lead tips crimped

280MM BACKWARD CURVE FAN 2 Depth of screw max. 6 mm Part No.

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

225

230

2700

1.0

$555.00

Connection screen

130-R2E280-AE52-05

280mm

Technical Features: Impeller material: Sheet steel. Rotation: Clockwise looking at rotor. Protection: IP44. Insulation: Class F. Maximum temperature: +40°C. U1 blue Overload protection: Wired internally. PE green/yellow Capacitor: 7 mfd.

■ ■ ■ ■ ■ ■ ■

brown

black

Item no. 11455-5-9980 · Revision 82891 · Release 2014-04-22 · Page 3 / 5 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

134

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

EBM Backward Curve Fans 280-310mm

280MM BACKWARD CURVE FAN Part No.

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-R4E280-AD08-05

280mm

230

1420

0.35

$567.00

Technical Features: ■ Impeller material: R4E280-AD08-05 Sheet steel. ■ Rotation: Clockwise looking at rotor. ■ Protection: IP44. ■ Insulation: Class F. 3. TECHNICAL ■ Minimum temperature: -25°C.DATA ■ Maximum temperature: +40°C. 3.1 Product drawing ■ Overload protection: Wired internally. ■ Capacitor: 2.5 mfd.

Operating instructions

All measures have the unit mm.

310MM

1 BACKWARD 2 3 Translation of the original operating instructions

Part No.

130-R4E310-AF12-09

Connection line PVC 4G 0.5mm², 4x brass lead tips crimped CURVE FAN Accessory part: Inlet nozzle 96360-2-4013, not included in the standard scope of delivery Depth of screw max. 6 mm

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

310mm

115

230

1430

0.5

$605.00

Technical Features: ■ Impeller material: PA6 plastic, fiberglass reinforced. AC centrifugal R4E310-AF12-09 ■ Rotation: Clockwise looking at rotor. backward curved ■ Protection: IP44. ■ Insulation: Class B. ■ Minimum temperature: -25°C. ■ Maximum temperature: Product+60°C. drawing ■ Overload protection: Wired internally. ■ Capacitor: 4.0 mfd.

fan

Item no. 11043-5-9970 · Revision 79663 · Release 2013-04-23 · Page 4 / 9 ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com

Connection line PVC 4G 0.5 mm², 4x lead tips crimped

Accessory part: Inlet nozzle 97512-2-4013 not included in scope of delivery

Depth of screw max. 10mm

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

135

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Backward Curve Fans 355-400mm

FANS & BLOWERS

355MM BACKWARD CURVE FAN Part No.

130-R4E355-AL02-05

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

355mm

245

230

1420

1.12

$740.00

Technical Features: R4E355-AL02-05 Impeller material: Aluminum sheet, laser welded. Rotation: Clockwise looking at rotor. Protection: IP44. Insulation: Class 3. F. TECHNICAL DATA Maximum temperature: +50°C. 3.1 Product drawing Minimum temperature: -25°C. Overload protection: Wired internally. Capacitor: 8mfd.

Operating instructions

All measures have the unit mm. 400MM BACKWARD CURVE FAN

Connection line silicone 4 x 0.5 mm², 4 x brass lead tips crimped Accessory part: Inlet nozzle 35560-2-4013,Volts not included inPh the standard of delivery. Other Current inlet nozzles on request Diameter Input Hzscope Speed Code Depth of screw max. 10 mm watts RPM Amps

List Price

Dimensions

400mm d

e 420Inlet ring230

Technical Features: R4D 400-AD22 -06 148 70 ■ Impeller material: Sheet steel. ■ Rotation: Clockwise looking at rotor. ■ Protection: IP44. R4E 400-AN09 -06 148 70 ■ Insulation: Class F. R6E 400-AK06 -06 128 50 ■ Maximum temperature: +70°C. ■ Overload protection: Wired internally. ■ Capacitor: 10 mfd. 218±2

1400

2.17

$995.00

54476-2-4013 54476-2-4013

EC centrifugal

Translation of the original operating instructions

130-R4E400-AN09-06 Type

54476-2-4013

Number of blades = 6

5±

d±2 5,5 Item no. 11068-5-9970 · Revision 75923 · Release 2011-11-22 · Page 4 / 9

Ø370

45˚

EC-SYSTEMS

Ø257

Ø 404

Ø124

Ø265,5

Ø100-0,4

ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com

EC axial

1 2 3

Part No.

AC axial

AC centrifugal

Information

■ ■ ■ ■ ■ ■ ■ ■

4 140 188

Mounting dimensions Ø7

Cable gland M20 x 1,5

136

Accessories

4x90˚

10 28

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

EBM EC Centrifugal Modules MiniBlaze & Blazemaster - Loncin Engine

270MM CENTRIFUGAL MODULE Part No.

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

130-K3G220-RD53-03

270mm

168

230

3230

1.4

List Price

$635.00

Technical Features: ■ Impeller material: PA plastic, galvanised round sheet metal plate. ■ Rotation: Clockwise looking at rotor. ■ Protection: IP54. ■ Insulation: Class B. ■ Maximum temperature: +80°C. ■ Minimum temperature: -40°C.

500MM CENTRIFUGAL MODULE Part No.

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

130-K3G500-AP25-01

500mm

2825

400

1780

4.3

$3855.00

Technical Features: ■ Impeller material: Sheet aluminium. ■ Rotation: Clockwise viwed toward rotor. ■ Protection: IP55. ■ Insulation: Class F. ■ Maximum temperature: +80°C ■ Minimum temperature: -40°C.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

137

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Zeihl Backward Curve Fans

FANS & BLOWERS

419MM BACKWARD CURVE FAN Part No.

Diameter

Input watts

Volts

Speed RPM

Air Volume m3/h

Current Amps

Code

List Price

130-RH40V-4EK.4F.1R

419

430

230

1280

4250

1.90

$1075.00

130-RH40V-VDK.4C.1R

419

440

400

1320

4450

0.77

$1075.00

Zeihl backward curve motorised fan with efficient low noise Vpro blade design. Technical Features: ■ Impeller material black composite. ■ IP44. ■ -15 to 50 degrees. Wide range of models available, please contact Argon for more details.

470MM BACKWARD CURVE FAN Diameter

Input watts

Volts

Speed RPM

Air Volume m3/h

Current Amps

Code

List Price

130-RH45V-4EK.4I.1R

470

620

230

1230

5500

2.8

$1275.00

130-RH45V-VDK.4F.1R

470

650

400

1250

5700

1.3

$1275.00

Part No.

Zeihl backward curve motorised fan with efficient low noise Vpro blade design. Technical Features: Impeller material black composite. IP44. -15 to 50 degrees.

■ ■ ■

Wide range of models available, please contact Argon for more details.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

138

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Zeihl Backward Curve Fans

FANS & BLOWERS

521MM BACKWARD CURVE FAN Part No.

Diameter

Input watts

Volts

Speed RPM

Air Volume m3/h

Current Amps

Code

List Price

130-RH50V-4EK.6K.1R

521

1300

230

1340

8500

5.8

$1975.00

130-RH50V-VDK.6F.1R

521

1200

400

1330

8500

2.2

$1975.00

584MM BACKWARD CURVE FAN Part No.

Diameter

Input watts

Volts

Speed RPM

Air Volume m3/h

Current Amps

Code

List Price

130-RH56V-6EK.6F.1R

584

660

230

860

8100

3.0

$2195.00

130-RH56V-VDK.6K.1R

584

1700

400

1180

11,100

3.3

$2195.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

139

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Hot Air Blower Cross Flow Fans

FANS & BLOWERS

HOT AIR BLOWERS Part No.

131-119348-00

RPM

Volts

Watts

Amps

Code

List Price

2500

230

0.55

$194.00

AFMC BLOWER UNITS 230 VAC Part No.

131-FD 96 325 01

Wheel Size

Tot. Length

Discharge Size

96x82x2

340mm

115x50x2

CFM

RPM

Amps

Code

List Price

2600

0.4

$275.00

Code

List Price

MOSSWYN CROSS FLOW FAN Part No.

Size

Watts

RPM

Volts

Amps

Dimensions A

131-KM-CF180

180mm

1200

230

0.16

183

196

246

155

$80.00

131-KM-CF240

240mm

1700

230

0.29

243

253

309

200

$93.00

131-KM-CF360

360mm

1600

230

0.35

362

374

435

332

$103.00

AFMC CROSS FLOW FAN UNITS – 230V – BALL BEARING MOTOR Part No.

Wheel Size

Total Length

Discharge Size

131-CB7S00201

180x58

250mm

131-CB12S4731

300x58

131-CB14S2011

360x58

CFM

RPM

Amps

Code

List Price

203x35

2600

0.2

$248.00

380mm

315x39

2600

0.2

$310.00

435mm

385x39

2600

0.2

$350.00

High quality ball bearing motor (Australian made).

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

140

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Fasco Blowers

EB80/1

AC BLOWERS FASCO Part No.

Code

CFM

Rpm

Volts

Watts

Amps

Code

List Price

131-EB80/1

2810 005 035

2770

230

0.4

$250.00

131-EB80/2

2810 005 002

160

2600

230

0.4

$465.00

131-EB140

2810 681 004

140

1410

230

0.5

$415.00

131-EB160

2810-622-003

160

2600

230

1.2

$460.00

131-EB220

2810 681 005

220

1410

230

0.8

$425.00

131-EB400

2810 681 006

400

1400

230

0.9

$465.00

SPECIFICATIONS

EB140

FLOW CURVE

EB160

EB220

EB400

EB80/2

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

141

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

AC Blowers

FANS & BLOWERS

AC BLOWER – 100-164 CFM Part No.

Watts

RPM

Rated current

Capacitor

Code

List Price

131-CA2V120-98-2

2300

0.35

2mfd

$220.00

131-CA2V120-98-4

1500

0.19

1mfd

$215.00

Die cast aluminum housing. Galvanized sheet steel impeller. Dual ball bearings. Operating voltage – 185 to 245VAC , 50/60Hz. 85 to 125VAC, 50/60 H2 - 115V version. Thermal protection (auto reset). Operating temperature: -20 to +60oC. Wheel size: 120 x 60mm.

■ ■ ■

Static Pressure

■

Pa 500 450 400 350 300 250 200 150 100 50 0

CAV120-98-2 CAV120-98-4

In H2O 2.00

175±1 (6.89±0.04) 82 (3.23)

M4 (M0.16)

1.75 1.50 1.25 1.00 0.75 0.50

450±20 (17.7±0.8)

0.25

0.00 0 Air Flow 0

25 50 0.5 1.0 1.5

75 100 2.0 2.5 3.0

125 150 3.5 4.0 4.5

Ø132 (Ø5.20)

175 CFM m3/min

115±1 (4.53±0.04) 100±1 (3.94±0.04) 76±1 (2.99±0.04) 50 (1.2)

■

83±1 (3.27±0.04) 68±1 (2.68±0.04)

■

176±1 (6.93±0.04)

■

82±1 (3.23±0.04)

■

450±20 (17.7±0.8)

Ø7 (Ø0.28) 98±1 (3.86±0.04)

6 (0.24)

AC BLOWER – 217-297 CFM Part No.

Watts

RPM

Rated current

Capacitor

Code

List Price

131-CA2V140-100-1

154

2400

0.67

4mfd

$325.00

131-CA2V140-100-2

124

1790

0.54

3mfd

$320.00

■

Static Pressure

■

Pa 550 500 450 400 350 300 250 200 150 100 50 0

In H2O 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 0 Air Flow 0

Pa In H 2O 550 2.25 500 2.00 450 1.75 400 1.50 350 300 1.25 250 1.00 200 0.75 150 100 0.50 50 0.25 0 0 Air Flow 0 0

CA140-100-2

M4 (M0.16) 25

75 2

100 3

125

150 175 4 5

200 225 6

250 CFM 7 m3 /min

226±1 (8.90±0.04) 103 (4.06)

CA140-100-1

Ø158 (Ø6.22)

100 3

150 4

200 6

250 7

130±1 (5.12±0.04) 115±1 (4.53±0.04) 94±1 (3.70±0.04) 92 (3.62)

■

105±1 (4.13±0.04)

■

120±1 (4.72±0.04)

■

Die cast aluminum housing. Galvanized sheet steel impeller. Dual ball bearings. Operating voltage: 185 to 245VAC, 50/60Hz. Thermal protection (auto reset). Operating temperature: -20 to +60oC. Wheel size: 140 x 60mm.

247±1

■

107±1 (4.21±0.04)

■

450±20 (17.7±0.8)

Ø6.3 (Ø0.25) 100±1 (3.94±0.04)

6 (0.24)

300 CFM m3/min

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

142

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

AC Blowers

FANS & BLOWERS

AC BLOWER – 255-314 CFM Part No.

Watts

RPM

Rated current

Capacitor

Code

List Price

131-CA2V146-100-2

211

1910

0.93

5mfd

$335.00

131-CA2V146-100-3

138

1600

0.60

3mfd

$330.00

■ ■ ■

130±1 (5.12±0.04) 115±1 (4.53±0.04) 94±1 (3.70±0.04)

M4 (M0.16)

226±1 (8.90±0.04) 103 (4.06)

92 (3.62)

(4.72±0.04) 105±1 (4.13±0.04)

■

450±20 (17.7±0.8)

Ø6.3 (Ø 0.25) 100±1 (3.94±0.04)

6 (0.24)

Ø158 (Ø6.22)

Static Pressure

■

247.5±1 (9.74±0.04)

■

107±1 (4.21±0.04)

■

CA146-100-2 CA146-100T-3

Pa In H 2 O 3.0 700 2.5 600 500 2.0 400 1.5 300 1.0 200 100 0.5 0

0.0

Air Flow 0 0

100 3

200 150 5 4 6

250 7

300

350 CFM m3/min

AC BLOWER – 337-386 CFM Part No.

Watts

RPM

Rated current

Capacitor

Code

List Price

295

2370

1.33

8mfd

$357.00

131-CA2V160-100-2

Technical Features: Die cast aluminum housing. Galvanized Sheet steel impeller. Dual ball bearings. Perating voltage: 185 to 245VAC, 50/60Hz. Thermal protection (auto reset). Operating temperature: -20 to +50ºC. Wheel size 160 x 60mm.

450±20 (17.7±0.8)

Ø6.3 (Ø0.25) 100±1 (3.94±0.04)

6 (0.24)

Ø175 (Ø6.89)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

143

Static Pressure

M4 (M0.16)

226±1 (8.90±0.04) 103 (4.06) 107±1 (4.21±0.04) 247.5±1 (9.74±0.04)

130±1 (5.12±0.04) 115±1 (4.53±0.04) 94±1 (3.70±0.04) 92 (3.62)

120±1 (4.72±0.04) 105±1 (4.13±0.04)

■ ■ ■ ■ ■ ■ ■

CA160-100T-2 CA160-100T-3

Pa In H 2O 3.5 800 3.0 700 2.5 600 500 2.0 400 1.5 300 1.0 200 100 0.5 0

0.0

Air Flow 0 0

100 3

150 200 6 4 5

250 300 350 400 450 CFM 8 9 10 11 12 7 m3/min

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Forward Curve Radial Blowers

FANS & BLOWERS

120MM FORWARD CURVE RADIAL BLOWER Part No.

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

131-G2E120-CR26-03

120

240

230

2200

0.34

$345.00

Technical Features: Impeller material: Sheet steel, galvanized. Housing material: Sheet steel, galvanized. Rotation: Clockwise looking at rotor. Protection: IP44. Insulation: Class B. Maximum temperature: +60°C. Minimum temperature: -20°C. Capacitor: 2µF.

■ ■ ■ ■ ■ ■ ■ ■

160MM FORWARD CURVE RADIAL BLOWER Part No.

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

131-G2E160-AY47-01

160

240

230

2100

1.05

$575.00

Technical Features: Impeller material: Sheet steel, galvanized. Housing material: Die cast aluminium. Rotation: Clockwise looking at rotor. Protection: IP44. Insulation: Class B. Maximum temperature: +50°C. Minimum temperature: -25°C. Capacitor: 6µF.

■ ■ ■ ■ ■ ■ ■ ■

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

144

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

EBM Forward Curve Radial Blowers

FANS & BLOWERS

133MM FORWARD CURVE RADIAL BLOWER Part No.

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

131-D2E133-DM47-01

133

240

230

1650

0.78

$440.00

Technical Features: Impeller material: Sheet steel, galvanized. Housing material: Sheet steel, galvanized. Rotation: Clockwise looking at rotor. Protection: IP44. Insulation: Class B. Maximum temperature: +40°C. Minimum temperature: -25°C. Capacitor: 3µF.

■ ■ ■ ■ ■ ■ ■ ■

146MM FORWARD CURVE RADIAL BLOWER Part No.

Diameter

Input watts

Volts

Speed RPM

Current Amps

Code

List Price

131-D2E146-AP47-22

146

240

230

2050

1.31

$475.00

Technical Features: Impeller material: Sheet steel, galvanized. Housing material: Sheet steel, galvanized. Rotation: Counter Clockwise looking at rotor. Protection: IP44. Insulation: Class B. Maximum temperature: +30°C. Minimum temperature: -25°C. Capacitor: 8µF.

■ ■ ■ ■ ■ ■ ■ ■

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

145

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Air Conditioning Type Blower Units (single)

FANS & BLOWERS

AFMC SINGLE BLOWER UNITS Part No.

Size

Watts

Type

Rated speed

Rated Current

Capacitor

Code

List Price

131-FB-9X7-315-01

9x7

315

Standard

1350

2.5A

4mfd

$575.00

131-FB-9X7T-315-13

9x7

315

Tight

1350

2.5A

4mfd

$575.00

131-FB-9X9-600-01

9x9

600

Standard

1200

4.4

15mfd

$695.00

131-FB-9X9T-600-06

9x9

600

Tight

1200

4.4

15mfd

$695.00

10 x 10

750

Standard

1360

4.9

20mfd

$795.00

131-FB-10X10-750 ■ ■ ■ ■ ■ ■

240V/50Hz supply. Thermal overload protected (auto reset). Insulation: Class B 130. Enclosure: IP20 (not suitable for fresh air supply fans) contact Argon. Other sizes available on request. Three speed.

PERFORMANCE DATA Part No.

Speed

Pressure (Pa) 50

Low Med High Low Med High Low Med High Low Med High Low Med High

131-FB-9X7-315-01

131-FB-9X7T-315-13

131-FB-9X9-600-01

131-FB-9X9T-600-06

131-FB-10X10-750

Airflow L/s

100

150

200

250

300

450 440 420 400 360 220 540 530 500 480 440 380 680 660 630 590 540 460 440 440 400 350 300 200 530 510 490 440 350 250 650 620 580 520 410 300 840 800 720 680 600 440 900 850 800 720 650 500 980 920 850 800 700 600 700 620 550 420 740 660 600 460 820 750 680 580 400 1000 990 960 910 880 800 1150 1120 1080 1030 1000 900 1320 1280 1200 1170 1100 1000

350

400

450

720 810 940

550 650 780

250 400 450

500

DIMENSIONAL DATA Part No.

131-FB-9X7-315-01

379

389

131-FB-9X7T-315-13

318

329

259

284

234

265

284

234

131-FB-9X9-600-01

379

389

259

352

302

131-FB-9X9T-600-06

318

325

259

352

302

131-FB-10X10-750

421

438

289

383

333

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

146

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Air Conditioning Type Blower Units (double)

FANS & BLOWERS

FASCO TWIN BLOWER UNITS Part No.

Wheel Size mm

Watts

Type

Rated speed

Rated Current

Capacitor

Code

List Price

131-FD-8X8-425

203x203

425

Standard

1315

3.6

10mfd

$775.00

131-FD-9X7T-600

241 x 181

600

Tight

1330

4.0

15mfd

$815.00

131-FD-9X7T-750

241 x 181

750

Tight

1360

4.9

20mfd

POA

131-FD-9X9-750

241 x 241

750

Standard

1360

4.9

20mfd

$1020.00

131-FD-9X9T-750

241 x 241

750

Tight

1360

4.9

20mfd

$1020.00

131-FD-10X10-1500

270 x 270

1500

Standard

1400

8.4

30mfd

POA

Specifications: n Direct drive fan deck. n Forward curve. n Double inlet blower. n Motor range: 315 - 1500 watt. n High temp plastic wheels. n Air volumes up to 2200 l/sec. Applications: n Air handling units. n Fan coil units. n Evaporative condensors. n Cooling towers. n Air conditioning units. n General ventilation. n Heating. Options: n Tight & Standard housing. n Motor options, Single, Variable & Multi speeds. n Steel Wheel. F G

DIMENSIONAL DATA Part No.

131-FD-8X8-315

280

320

308

255

760

810

250

205

163

131-FD-8X8-425

280

320

308

255

760

810

250

205

163

131-FD-9X7T-600

320

329

311

262

765

816

235

227

169

131-FD-9X7T-750

320

325

311

262

765

816

235

227

169

131-FD-9X9-750

381

389

311

255

875

901

303

225

170

131-FD-9X9T-750

320

329

312

255

875

900

303

225

169

131-FD-10X10-1500

421

438

457

326

1072

1150

330

274

190

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

147

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Belt Driven Blowers Single

FANS & BLOWERS

BELT DRIVE BLOWERS - SINGLE Part No.

Nominal Size

Configuration

Code

List Price

131-SYT9-7L

9x7

Single

$495.00

131-SYT9-9

9x9

Single

$525.00

131-SYT10-8

10x8

Single

$565.00

131-SYT10-10

10x10

Single

$595.00

131-SYT12-9L

12x9x25

Single

$699.00

131-SYT12-12L*

12x12

Single

$725.00

131-SYT15-11L

15x11

Single

$895.00

131-SYT15-15L*

15x15

Single

$975.00

131-SYT18-18

18x18

Single

$1275.00

More details available on request. Many larger sizes available in single and double configuration. * Torin type - not supplied with base mounting.

■ ■

■

Specifications correct at time of printing. Please contact Argon for details.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

148

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Belt Drive Double Blowers

YILIDA BELT DRIVE BLOWERS - DOUBLE Part No.

Nominal Size

Configuration

Code

List Price

131-SYT10-10L2

10x10

Double

$1175.00

131-SYT12-9L2

12x9

Double

$1210.00

131-SYT12-12L2

12x12

Double

$1250.00

131-SYT15-15L2

15x15

Double

$1450.00

131-SYT18-18L2

18x18

Double

$2150.00

Other sizes available - contact Argon. *Note - Base mounting may not be available - please check.

■

Specifications correct at time of printing. Please contact Argon for details.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

149

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Roof Supply/Extract Fan Unit

REC CENTRIFUGAL EXTRACT FAN Part No.

Phase

RPM

Amps

Q max L/ sec

Code

List Price

131-REC1921

2 pole (3spd)

0.06

0.26

150

$675.00

131-REC2221

2 pole (3spd)

0.1

0.45

260

$850.00

131-REC2841

0.11

0.53

375

$1100.00

131-REC 3141

0.14

0.62

550

$1150.00

131-REC3541

0.27

1.3

800

$1850.00

131-REC3543

4 (Y/D)

0.24

0.47

700

$1850.00

131-REC4041

0.43

1.9

1100

$1950.00

131-REC4043

4 (Y/D)

0.44

0.77

1100

$1950.00

131-REC4561

0.3

1.4

1100

$2050.00

131-REC4563

6 (Y/D)

0.25

0.58

1100

$2050.00

131-REC5061

0.45

2.2

1500

$2500.00

131-REC5063

6 (Y/D)

0.42

0.93

1500

$2500.00

131-REC5661

0.66

2000

$3200.00

131-REC5663

6 (Y/D)

0.61

1.05

2000

$3200.00

131-REC6363

6 (Y/D)

1.1

2.2

3000

$4200.00

Roof mounted extract fan assembly’s use a high performance centrifugal impeller for high efficiency and low noise applications. They include a UV stabilized plastic cowl and rain hood and are simple to install over square roof upstand. Please contact Argon for help with fan size selection. Fresh air supply or axial fan models are also available - POA. Assembly items – please contact Argon for delivery times. Technical Features: Low noise impeller design. UV stabilized ASA polymer cowling. Speed controllable. IP44 minimum motor protection. Sealed for life ball bearings. Higher efficiency.

n n n n n n

DIMENSIONS AND SPECIFICATIONS A

REC1921

Model No.

300

200

400

220

REC2221

300

200

400

220

REC2841

400

300

480

253

REC3141

475

375

600

259

REC3541

550

450

710

355

REC3543

550

450

710

355

REC4041

550

450

710

355

REC4043

550

450

710

355

REC4561

650

550

844

390

REC4563

650

550

844

390

REC5061

650

550

844

480

REC5063

650

550

844

480

REC5661

750

650

950

550

REC5663

750

650

1030

550

REC6363

850

750

1530

660

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

150

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MiniBlaze DCI Series&Case Blazemaster Fans - Loncin Engine

FANS & BLOWERS

DCI SERIES FAN SETUP Part No.

Diameter

Length

Code

List Price

130-DCI-315

315

Double

POA

130-DCI-400

400

Double

POA

130-DCI-500

500

Double

POA

130-DCI-560

560

Double

POA

130-DCI-630

630

Double

POA

130-DCI-710

710

Double

POA

Other sizes available - contact Argon. *Note - Base mounting may not be available - please check.

■

The DCI series are a galvanised case fans series with axial variable pitch fan blades that can be customised to suit your required air volume and pressure – please contact Argon with your duty. Single or three phase foot mount motors are used with terminal enclosure on exterior of case. Motors can be speed controlled. Fans with forced or induced air flow are available with PPG, PAG or Aluminium fan blades. Cases come in 6 standard sizes with flanges and are galvanised for corrosion protection. Mounting brackets are available.

Available with PPG, PAG or Aluminium fan blades.

DIMENSIONS AND SPECIFICATIONS A

130-DCI-315

Model No.

315

380

400

355

130-DCI-400

400

485

400

450

130-DCI-500

500

585

400

560

130-DCI-560

560

645

400

620

130-DCI-630

630

715

400

690

130-DCI-710

710

795

400

770

See page 76 for Fan options

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

151

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

FANS & BLOWERS

Notes MiniBlaze & Blazemaster - Loncin Engine

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

152

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA EQUIPMENT

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

Index

What’s New! 5

APR SERIES POOL PUMPS

PENTAIR SALT CHLORINATORS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

154

REBEL ROBOTIC CLEANER

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

Index

156

157

POOL & SPA EQUIPMENT APR Series

158

160

159

PPP Series

162

Portapac Series

LTPS Series

1 166

1 165

933 Series

SMA Series

172

170

SPA Blowers &Heaters

Pool Cleaners

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Chlorine In-Line Feeders 155

Pool Cleaning Accessories

174

173

Salt Chlorinators

SMA20 Single Speed

171

LEISURETIME II Sand Filter

173

200 Series

167

SPA Series

169

Two Speed SPA Pumps

Max-E-Pro Series

163

166

SPA Circulators

168

161

Enviromax Series

Silentflo Series

162

LTP Series

White goods

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

APR Series

APR100 POOL PUMP Model

210-APR100

Volts

Phase

Amps

Code

List Price

1.0

0.75

230

4.6

$415.00

The APR100 is an economy pool pump particularly suitable for small above ground swimming pools up to 50000 litres. Flooded suction applications only. Technical details: Totally enclosed IP55 rated motor. ■ Class F insulation, 2900rpm. ■ Supplied with connection unions to suit 40mm PVC pipe. ■ Fitted with 1.5m lead and plug. 16 ■ Water temperature range: 5ºC to 60ºC. ■

Construction Materials ■ Hair and lint pot, pump body & diffuser: glass fibre reinforced polypropylene. ■ Impeller: glass fivre reinforced polyamide. ■ Hair and lint pot lid: polycarbonate. ■ Mechanical seal: carbon/ceramic/NBR. ■ O Rings: NBR.

12 10 HEAD (M)

APR 100

8 6 4 2 0 0

120

160

FLOW (LPM)

200

240

280

320

APR150/200 POOL PUMP HP

KW (P2)

Volts

Phase

Amps

Code

List Price

210-APR150

Model

1.5

1.1

230

7.0

$725.00

210-APR200

2.0

1.5

230

$875.00

The APR150/200 pool pumps are ideally suited for medium to large sized pools around 90000 litres. Large hair/lint pot strainer and lid for effective operation and easy maintenance. Sturdy plastic base mount keeps the motor well above the ground and away from moisture. Technical details: ■ Totally enclosed IP55 rated motor. ■ Class F insulation, 2900rpm. ■ Supplied with connection unions to suit 50mm PVC pipe. ■ Fitted with 1.5m lead and plug. ■ Water temperature range: 5ºC to 60ºC. Construction Materials ■ Hair and lint pot, pump body & Diffuser: Glass fibre reinforced Polypropylene . ■ Impeller: Glass fibre reinforced Polyamide. 22 ■ Hair and lint pot lid: Polycarbonate. 20 ■ Mechnical seal: Carbon/Ceramic/NBR. 18 ■ O Rings: NBR.

664

16 14

APR 200

12 HEAD (M)

APR 150

360

8 6 4 2 0 0

120

160

200

240

280

320

FLOW (LPM)

360

400

440

480

520

560

280 2 YEAR WARRANTY

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

156

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

Pentair Leisuretime Series

ONGA LEISURETIME POOL PUMPS Part No.

Voltage

Phase

Full Load Amps

Code

List Price

210-LTP400

0.5

0.40

230

2.7

$690.00

210-LTP550

0.75

0.55

230

3.5

$715.00

210-LTP750

1.0

0.75

230

4.3

$750.00

210-LTP1100

1.5

1.10

230

5.4

$930.00

The range of lesuiretime swimming pool pumps have been purposefully designed to provide maximum performance and corrosion resistance at a realistic cost. ■ Ideal for small to medium domestic swimming pools and solar pool heating. Applications: ■ Swimming pools from 20,000 litres up to 90,000 litres. ■ Solar heating circuits. ■ Above ground pools. Features & Benefits ■ IP55 (TEFC) motor – with IP55 protection from dust and water the LTP pumps are preserved against elements for many years. ■

Po o l Filter range see pg 356

Electrical approvals-the LTP series pool pumps have passed all stringent Australian standards AS/NZS3136:2001 for safety and is approved for installation within the wetted zone of the pool area, approvals V99108, V02301, V02302.

Pump Performance Chart 25

Head (metres)

20 15 10 5 400

0 0

100

550

750

200 300 Flow (litres/minute)

1100 400

500

Disclaimers Every endeavour has been made to publish the correct details in this leaflet. No responsibility will be taken for errors, omissions or changes in product specifications. All performance data taken at sea level.

Operating Conditions

Suitable for pumping clean non-aggressive liquids without solids or fibres in suspension.

Fluid: Maximum working pressure: Water (Swimming Pool) temp range: Ambient temperature:

Water 270 kPa 5ºC-35ºC 50ºC maximum

Motor Type: Nominal speed: IP rating: Insulation class: Thermal overload: Temperature rise: Frequency: Voltage: Bearing type: Bearing temperature rating:

TEFC 2 pole 2800 rpm IP55 Class F Internal Class B 50Hz* 230-240* Deep groove ball bearing with double contact lip seal 150ºC

Materials Component Pump casing: Clacker: Impeller: Baffle: Drain plug: Diffuser: Basket: Shaft sleeve: Motor shaft: End shield: Hair and lint pot O-ring: O-rings: Barrel unions: Hair and lint pot lid: Cord/Plug:

Materials Glass filled ABS Polypropylene Glass filled ABS Glass filled ABS Polypropylene Glass filled ABS HD polyethylene Nylon K-1137 steel Double zinc coated cast iron Nitrile Low friction nitrile ABS Polycarbonate Approved to AS/NZS 3112

*PVC Pipe to AS/NZS 1477. Union to suit metric PVC to ISO727 available upon request.

Pump Model LTP400 LTP550 LTP750 LTP1100

Mechanical seal, 1/2” type 6 (LTP1100 = type 6 3/4”) Flexible bellows: Nitrile Stationary face: Ceramic Rotating face: Carbon Spring: 304 stainless steel

A (mm) 556 578 578 587

B (mm) 454 454 454 448

C (mm) 91 91 91 91

D (mm) 152 152 152 152

E (mm) 254 254 254 254

F (mm) 260 260 260 260

Note: Dimension ‘E’ an additional 160mm clearance height required above the pump to remove strainer basket for maintenance and cleaning purposes. Unless otherwise specified, all dimensions in mm. Fixing holes accept 8mm fasteners.

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

157

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

Pentair Pantera Series

ONGA PANTERA POOL PUMPS Part No.

Voltage

Phase

Full Load Amps

Code

List Price

210-PPP550-P

0.75

0.55

230

2.5

$925.00

210-PPP750-P

1.0

0.75

230

4.3

$950.00

210-PPP1100-P

1.25

1.0

230

5.4

$1085.00

210-PPP1500-P

1.5

1.2

230

6.2

$1235.00

The Pantera pool pumps have been specifically designed to incorporate features that will provide reliable and efficient pump operation. The new technology wet end design integrates a unique moulded end-shield cover and lip seal protecting the motor from water damage. Features & Benefits (TEFC) motor – with IP55 protection from dust and water the PPP pumps are preserved against elements for many years. ■ Stainless steel motor shaft. ■ Electrical approvals - the PPP series pool pumps have passed all stringent Australian standards AS/ NZS3136:2001 for safety and is approved for installation within the wetted zone of the pool area, approvals V99108, V02301, V02302. ■ Self-aligning barrel unions - Onga’s unique 5 degrees self-aligning barrel unions make pipe work connection a breeze. ■ IP55

Line Drawings

Pump Performance Chart 25

Head (metres)

20 15 10 5 550

0 0

100

200

750

300 Flow (litres/minute)

1100

1500

400

1500H 500

600

Dimensions Pump Model PPP550 PPP750 PPP1100 PPP1500 PPP1500H

A (mm) 630 630 630 630 630

B (mm) 487 487 495 495 495

C (mm) 121 121 144 144 144

D (mm) 185 185 185 185 185

E (mm) 288 288 288 288 288

F (mm) 290 290 290 290 314

Mechanical seal,3/4 type 6 (PPP550 1/2”) Flexible bellows: Stationary face: Rotating face: Spring:

ONGA PANTERA EVO POOL PUMPS

Nitrile Ceramic Carbon 18-8 stainless steel

Part No.

RPM

Voltage

Phase

Full Load Amps

Code

List Price

210-PPP950-2SP

2800

0.25/1.2

230

1.0/5.2

$1380.00

The new Pantera® Evolution is the ideal pump for new or existing pools. Utilising efficient hydraulic design and the latest technology in electronic control two speed motors, the Pantera Evo’ has the perfect combination of efficiency and performance. The Pantera Evo’ delivers energy savings for a realistic cost outlay and the power when you need it. The Pantera Evo’ is a direct drop in replacement for the thousands of LTP and PPP series of pumps in use today. Pantera Evolution - Performance Chart 20.00 18.00 16.00 14.00

Head (m)

Features & Benefits ■ High-speed priming runs the pump at high speed for the first 2 minutes to ensure the pump is primed and ready, before automatically switching to low speed and saving money while you filter. ■ High-speed Boost mode runs the pump at high speed for 2 hours to give you time to vacuum your pool, run a suction cleaner, or super-chlorinate and the pump will automatically switch back to low, so don’t worry about forgetting! ■ Sync Mode will alternately start the pump in high and low speeds, allowing you to program high-speed and low-speed cycles with your time clock. Also remember you can change speed at any time, with the touch of a button.

12.00 10.00

High - 2800RPM

8.00 6.00 4.00

Low - 1450RPM

2.00 0.00

1502

2503

3504

450

Flow (L/min)

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

158

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

SilentFlo Series

STA-RITE SILENTFLO SERIES Part No.

Watts (P2)

Voltage

Phase

Full Load Amps

Code

List Price

210-SF550110

0.5

450

230

2.6

$1130.00

210-SF750103

0.75

550

230

3.0

$1210.00

210-SF1100100

1.2

790

230

4.5

$1310.00

210-SF1500100

1.5

1190

230

6.7

$1445.00

The SilentFlo range of pool pumps meets the latest issues in the pool industry – noise levels and efficiency – these pumps are at the top of the list for quietness and efficiency to minimize the cost of operation and maximize the enjoyment of pool ownership Applications: ■ Swimming pools from 20,000 litres up to 130,000 litres. ■ High quality pools where quiet operation is a must. ■ Pools where high efficiency is required. Features & Benefits ■ Extremely quiet hydraulic design enabling you to run this pump at night, without disturbing the neighbors, taking advantage of the off-peak tariffs. ■ Extremely efficient hydraulic design which minimizes running costs. ■ Elevated base - further dampens sound and vibration, and keeps the pump above sitting water, minimizing pump corrosion. ■ Stainless Steel motor shaft extends the life of the pump by reducing corrosion. ■ P55 (TEFC) motor – with IP55 protection from dust and water the SilentFlo pumps are preserved against elements for many years. ■ Large volume strainer basket minimizes the maintenance requirement by extending the time between strainer basket clean outs. ■ Included 50mm barrel unions making it quick and easy to install, while allowing pump removal without flexing pipework. ■ Dual connections: 50mm thread or 50mm barrel unions allows piping flexibility - threaded connections allow for permanent installation - service is still possible by removing the motor and yoke from the casing. ■ Thermoplastic casing and hydraulic parts provides total corrosion resistance for long life and peace of mind. ■ The SilentFlo range of pool pumps have passed all the requirements of AS/NZS 60335.2.41:2004 for safety, and is approved for installation within the wetted zone of the pool area. ■ Captive bolts for easy servicing, no lost fasteners.

Performance

Head (metres)

15 SF1500100

10 5 0

100

SF550100

SF750100

200

300 Flow (litres/minute)

SF1100100

500

400

600

Materials Pump Casing Impeller Diffuser Yoke Drain plugs Motor shaft End shield Strainer basket Strainer basket o-ring Strainer pot lid Barrel unions Base Seal bellows Seal stationary face Seal rotating face Seal Spring

Motor Type: Nominal speed: IP rating: Insulation class: Thermal overload: Temperature rise: Voltage: Frequency: Bearing type: Bearing temp rating:

TEFC 2 pole 2900 rpm IP44 Class F Internal, automatic reset Class F 230-240V 50Hz Deep groove ball bearing 120ºC

Reinforced Polypropylene 40% Glass Filled Polyphenylene Ether Polypropylene HP TF 40% Polypropylene 40% Glass Filled Polypropylene SS 303 Cast Aluminium High Impact Polystyrene Low friction nitrile Makrolon Polycarbonate Acrylonitrile Butadiene Styrene Copolymer Polypropylene Nitrile Aluminium oxide Carbon SS 316

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

159

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Enviromax MiniBlaze &Series Blazemaster - Loncin Engine

POOL & SPA

ONGA ENVIROMAX SERIES Part No.

RPM

Voltage

Phase

Full Load Amps

Code

List Price

210-EVMX800

2850

230

6.5

$1915.00

210-EVMX1500

3000

230

$2325.00

New ONGA EnviroMAX® Variable Speed Pumps bring the remarkable energy cost savings of variable speed technology to everyday pools that require up to a 2.0-HP pump. They dramatically reduce energy costs by moving water more efficiently at lower speeds. Building on the success of previous EnviroMAX® pool pumps, the new EnviroMAX® adds higher output so you can do more; filtration, spa jets, water features and even in-floor cleaning. Features & Benefits ■ Built in Time-Clock – With battery back-up, allows EnviroMAX® to be used as standalone pump. ■ Step Advance – Feature gives a duration setting for each speed and automatically moves to the next speed, for up to 24 hours of program. ■ Powerful Head and Flow – Increased head and flow makes pump suitable for spa jets, in-floor cleaning and other high demand applications. ■ Adjustable Priming – Set desired priming speed or deactivate altogether. ■ Power Factor Correction – Some variable speed pumps have low power factors, which gives dirty power that your power company can charge you, up to, double for. EnviroMAX® has a power factor >0.9 which means the power consumption shown on our energy label, is what you are actually charged for.* ■ Digital Control Input – For connection to automation systems. ■ Tough and Durable – Pump made from Dura-Glas™ composite, reinforced, resin. UV and weather resistant. ■ Quiet Operation – Our quietest EnviroMAX® yet. ■ Precision Fit Components – Precision engineering for quality, reliability and efficiency. ■ 8-Star Energy Rating. *Energy label power consumption is achieved when running at operating points specified on the label. Conditions vary from site to site.

16.0 EnviroMAX 800 Performance Chart

14.0

2850RPM

Head (m)

12.0

2600RPM

10.0

2850RPM

681mm

279mm

2600RPM

2400RPM

353mm

2400RPM

8.0 6.0 4.0

2200RPM

2000RPM

1800RPM

1600RPM

1450RPM

385mm 432mm 364mm

ALLOW MINIMUM CLEARANCE OF 460mm FOR KEYPAD COVER

2.0 0.0 0.0

100.0

200.0

300.0

400.0

500.0

Flow (L/min)

22 20 18

661mm

279mm

333mm

Head (m)

16 14 12 10

385mm

364mm

515mm

ALLOW MINIMUM CLEARANCE OF 515mm FOR KEYPAD COVER

100 150

200

250 300

3504 00

450

500 550

2 0

28 26 50 00 24 RP 0 R 0R M 20 00 00RP PM PM 1 1 8 R 120 1400 600R 00RP PM M 0RP RPM PM M M

600 650

EnviroMAX 1500 Performance Chart

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

160

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

Max-E-Pro Series

STA-RITE MAX-E-PRO POOL PUMPS Part No.

Watts (P2)

Voltage

Phase

Full Load Amps

Code

List Price

210-MP730100

0.73

690

230

4.1

$1620.00

210-MP930100

0.93

870

230

5.4

$1760.00

210-MP1100100

1.1

1000

230

6.0

$1805.00

210-MP1108100

1.1

1000

400

2.7

$1850.00

210-MP1500100

1.5

1350

230

7.9

$2085.00

210-MP1508100

1.5

1350

400

3.0

$2145.00

210-MP2201100

2.2

1950

230

10.7

$2375.00

210-MP2208100

2.2

1980

400

4.4

$2445.00

For the discerning buyer who does not want to sacrifice quality or performance, the Sta-Rite Max-E-Pro range of pool pumps set the standard. This pump was designed to make sure your pool setting is all about fun and relaxation – not the equipment that runs it. ■ The heavy duty motor is designed to offer extended life and quiet operation. The pump end is precision moulded from industrial grade materials for corrosion resistance. Applications: ■ High end swimming pools. ■ Swim spa. ■ Pools with in-floor cleaning systems. ■ Commercial applications.

Features & Benefits ■ IP55 (TEFC) motor – with IP55 protection from dust and water the pumps are preserved against elements for many years. ■ Stainless steel motor shaft. ■ Elevated Motor – Designed to dampen sound and vibration, also keeping ground moisture away from the motor. ■ Electrical approvals – the Max-E-Pro series pool pumps have passed all stringent Australian standards AS/NZS 3350 for safety and is approved for installation within the wetted zone of the pool area, approvals Q38344, Q99350. ■ Quick lock lid for easy routine maintenance, no tools required.

Pump Model Single Phase 3 Phase

MP750

MP930

650 650

MP1100 MP1500 MP2200 650 650

650 650

695 670

Note: unless otherwise specified, all dimensions in mm. Fixing slots accept 10-13mm fasteners 180mm minimum clearance required for cooling and servicing from motor cowl.

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

161

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

LTPS Series Portapac Series 933 Series

POOL & SPA

ONGA LTP SOLAR PUMPS Part No.

Voltage

Phase

Type

Code

List Price

210-LTP400S

0.5

0.4

230

Without H/L Pot

$665.00

210-LTP550S

0.7

0.55

230

Without H/L Pot

$685.00

210-LTP750S

1.0

0.75

230

Without H/L Pot

$730.00

The Leisuretime range of solar heating pumps are specially designed to handle hot water generated from solar heating banks. They offer unique corrosion protection with an electrophoretic coated end-shield. Sized from 1/2 to 1Hp to meet most solar heating requirements. Features: ■ Built in drain-down clacker. ■ Stainless Steel shaft and mechanical seal. ■ Self aligning barrel unions. ■ IP55 motor protection.

P ump Model

LTP400S

LTP550S

LTP750S

A (mm)

347

356

PORTAPAC SPA POOL PUMP & HEATER ASSEMBLY Part No.

Watts

Type

Code

List Price

210-41070-4

550

0.75

Demand 1.6kW Heater (Spa Bath)

$1600.00

210-41080-4

750

1.0

Demand Elite 2.4kW Heater (Spa Pool)

$1800.00

■ ■

Supplied with mac unions and sensor probe. (Not plumbing matched to Pre-2000 Model). Controlled by air switch - air switch button not included.

ONGA SPA PUMP 933 SERIES Part No.

210-393300 ■

Volts

Phase

Code

List Price

1.1

230

$1200.00

For replacement only. Does not include 3” Unions.

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

162

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

200 Series

200 SERIES Part No.

210-238801

Voltage

Phase

Control

Code

List Price

1.0

230

Air Switch

$835.00

The 200 series bath pumps are designed for use in spa baths where water is drained after each use. They are a self-draining design and require air switch or touch pad control - sold separately.

Construction Component

Material

Pump Casing

20% Glass Filled Noryl

Impeller

20% Glass Filled ABS

Baffle

20% Glass Filled ABS

End Shield

Die Cast Alluminium

Shaft Sleeve

Nylon

Motor Shaft

Mild Steel

Motor Shell

Die Cast Aluminium

O-ring's

Nitrile

Barrel Union

ABS

Heater Element

Incalloy

Sound Power Level

from 65 dBa @ 1 metre

16 14

Head (metres)

12 10 8 6 4 Onga 239

Onga 238

0 0

100

150

200 250 300 Flow (litres/minute)

350

400

450

500

SPECIFICATIONS AND DIMENSIONS Part No.

210-2381-1X

410

143

217

135

213

210-238801

410

143

217

135

213

1 YEAR WARRANTY Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

163

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

200 Series Heated

200 SERIES Part No.

Heater kW

Voltage

Phase

Control

Code

List Price

1.0

1.3

230

Air Switch

$1175.00

1. 25

1.3

230

Touch Button

200 SERIES AS 210-2381-1X 200 SERIES DR 210-239701 345-512600 Kit

Touch Button Kit for DR

$1350.00

$75.00

$1585.00

$210.00

200 SERIES V2 210-23940

1. 25

1.3

345-411400 Kit

230

Touch Pad

Touch Pad Kit for V2

The 200 series bath pumps are designed for use in spa baths where water is drained after each use (element not suitable for chemically treated water). They are a self-draining design and require air switch or touch pad control - sold separately. Construction Component

Material

Pump Casing

20% Glass Filled Noryl

Impeller

20% Glass Filled ABS

Baffle

20% Glass Filled ABS

End Shield

Die Cast Alluminium

Shaft Sleeve

Nylon

Motor Shaft

Mild Steel

Motor Shell

Die Cast Aluminium

O-ring's

Nitrile

Barrel Union

ABS

Heater Element

Incalloy

Sound power level

from 65 dBa @ 1 metre

Touch Button for DR

Touch Pad for V2

16 14

Head (metres)

12 10 8 6 4 Onga 239

Onga 238

0 0

100

150

200 250 300 Flow (litres/minute)

350

400

450

500

SPECIFICATIONS AND DIMENSIONS Part No.

210-239701 210-23940

410

143

217

135

213

410

243

285

221

245

1 YEAR WARRANTY Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

164

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

SPA Circulators

WATKINS SILENTFLO E5 CIRCULATOR PUMP Model

210-74428

Watts

Amps

Volts

Code

List Price

230

$595.00

Silent-Flo Circ Pump 73379 E5 Silentflo 5000, PN:301393F. Technical Features: Protection: IP44. ■ Hz: 50/60. ■

LAING THERMOTECH E10 CIRCULATOR Model

Watts

Amps

Volts

Code

List Price

0.3

230

$495.00

Watts

Amps

Volts

Code

List Price

115

0.5

230

$655.00

Amps

Volts

Code

List Price

210-CIRC-M

1/15

0.62

230

$830.00

210-CIRC-HF

1/15

0.62

230

$840.00

Amps

Volts

Code

List Price

0.25

0.8

230

$560.00

$25.00

210-Q6101

Laing Thermotech E10 Circulator. Technical Features: Protection: IP55. ■ Hz: 50/60. ■

LAING THERMOTECH E14 CIRCULATOR Model

210-S246497 Technical Features: ■ Protection: IP55. ■ Hz:50/60. ■ Supplied with unions .

FLO-MASTER CIRCULATOR Model

Series CMHP, Pump model: 02140004-2. Technical Features: ■ Protection: IP55. ■ Speed: 1425rpm. ■ Supplied with unions. ■ Height to discharge: 207mm. ■ Height to centre of Inlet: 88mm. ■ Circ-M-40mm. ■ Circ-HF-50mm. BALBOA CIRCULATOR PUMP Model

210-1070017 340-B2614022

Tail, nut and O Ring

Technical Features: Protection: IP55. ■ Insulation: Class F. ■ Speed: 1400 rpm. ■ Max operating liquid temperature: 50ºc. ■ Not Supplied with connection unions – order separately. ■ Alternate to E14 or CIRC-M. ■

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

1 YEAR WARRANTY

165

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

SMA 8 Single Speed Spa Pump

SPA SERIES – SELF DRAINING SPA PUMP Model

Amps

Volts

Code

List Price

210-SPA-05

0.5

2.0

230

$235.00

210-SPA-10

1.0

4.0

230

$320.00

Self-Draining Spa pool pump for spa pool or solar circulation. Technical Features: ■ Protection: IP55. ■ Insulation: Class F. ■ Speed: 2900rpm. ■ Incorporated air switch. ■ Operating liquid temperature range: 5ºC to 60ºC. ■ Supplied with 40mm connection Unions.

SPA 05 & 10 16 14

12 10 HEAD (M)

SPA10

8 SPA05

Model

SPA-05

SPA-10 0

120

160

200

FLOW (LPM)

240

280

320

B A

152

320

157

350

180

190

180

210

360

SMA SERIES – CIRCULATION PUMP Model

210-SMA-10

Amps

Volts

Code

List Price

1.0

3.0

230

$260.00

Spa or solar circulation pump Technical Features: ■ Protection: IP55. ■ Insulation: Class F. ■ Speed: 2900rpm. ■ Incorporated air switch. ■ Operating liquid temperature range: 5ºC to 60ºC. ■ Supplied with 40mm connection unions.

195

HEAD (M)

175

SMA 10

150

290

0 0

120

160

200

FLOW (LPM)

240

280

320

360

1 YEAR WARRANTY Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

166

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

SMA20 Single Speed

SMA20 SINGLE SPEED SPA PUMP Model

210-SMA20

Amps

Volts

Code

List Price

2.0

7.0

230

$515.00

200 mm

90 mm

240 mm

196 mm

Technical Features: ■ Protection: IP55. ■ Insulation: Class F. ■ Speed: 2900rpm. ■ Incorporated air switch. ■ Operating liquid temperature range: 5ºC to 60ºC. ■ Supplied with 50mm connection Unions. ■ Replacement for XP2 single speed pumps.

380mm

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

167

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

Two Speed Spa Pumps

BALBOA 2 SPEED SPA PUMP Model

Amps

Volts

Code

List Price

210-1023024

1.5/0.5

5.7/1.5

230

$930.00

210-1023034

2.0/0.5

9.0/1.9A

230

$1035.00

Technical Features: ■ Protection: IP55. ■ Insulation: Class F. ■ Speed: 2900rpm/1450rpm. ■ Operating liquid temperature range: 5ºC to 60ºC. ■ Supplied with 50mm connection Unions. ■ Suction and Discharge 50mm. ■ Replacement for XP2 2 speed series pumps.

16 14

2.0HP 2900 rpm

12 10 HEAD (M)

1.5HP 2900 rpm

8 6 4

2.0HP 1450 rpm 1.5HP 1450 rpm

2 0 0

Cubic Meter Per Hour

Pump end Dimension

210-1023024

109

210-1023034

109

WATKINS XP2E 2 SPEED SPA POOL PUMP Model

210-73028 340-A91431150

2.5/0.3

Amps

Volts

Code

List Price

10.3/1.8

230

$1275.00

$25.00

Tail, nut and O Ring

200 mm

90 mm

240 mm

200 mm

Technical Features: ■ Protection: IP55. ■ Insulation: Class F. ■ Speed: 2800/1420 rpm. ■ Max operating liquid temperature: 50ºC ■ Not Supplied with connection unions – order separately.

415 mm

1 YEAR WARRANTY Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

168

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

SPA Heaters and Blowers

SPA POWER 500 HEATERS Part No.

Watts

Amps

Type

Code

List Price

712-Q500A15

1500

10A

Spa Heater 1.5kW

$1150.00

712-Q500A20

2000

15A

Spa Heater 2.0kW

$1150.00

$210.00

712-Q71092-035P5 ■ ■ ■ ■ ■ ■

Control Touch Pad and Cable

Plug in spa heater/controller for portable spas. 2 x CAT38 Power Socket outputs for main pump and axillary – (blower/light). Supplied complete with 40mm unions. Control Touch Pad & Cable supplied seprately. Heater controlled by integral presure switch which senses when the pump is running. Pump requires air switch or similar controller.

CLASSIC ELECTRIC SPA HEATER Part No.

Power

Amps

Description

Code

List Price

712-Q54553

2.3kW

15A

Single Phase Heater

$950.00

712-Q54555

6.0kW

30A

Single Phase Heater

$950.00

340-Q949448

6.0kW

Replacement Element

$360.00

340-Q949446

2.3kW

Replacement Element

$360.00

■ Quality engineering plastics ensure a high degree of safety in this innovative and effective electric spa heater. Available in 2.3kw to 6.0kw output to suit portable or in-ground spas, the power head includes adjustable thermostat, high limit safety for automatic heating control and pressure switch. Can be installed vertical or horizontal. ■ Heater controlled by integral presure switch which senses when the pump is running. ■ Pump requires air switch or similar controller. ■ Complies with AS3136 and NZ6232. Approval No. NI14524.

SPA AIR BLOWERS Part No.

Power

Description

Code

List Price

712-SB900

900W

40mm- Discharge

$350.00

The SB900W spa blower is a high-performance blower with high air flow, pressure and low noise. They come with 3 pin plug and union connection for simple horizontal or vertical installation in most spa pools. Quieter, simpler and much better value than existing blowers. It is more compact, easier to install either horizontally or vertically in portable or in-ground spas. When installed under the skirt of a portable spa it is virtually silent. ■

ONGA AIR BLOWER Part No.

Power

Description

Code

List Price

1200

50mm discharge

$540.00

712-1044100

For greater levels of spa indulgence. The Pentair blower adds the revitalizing touch of warm swirling water enriched with millions of bubbles on your body in the ultimate therapeutic pleasure. In perfect harmony with your spa bath the Pentair Spa Pool Blowers deliver a strong, reliable massage. ■

No air switch

ONGA AIR SWITCH Part No.

350-110635

Amps

Description

Code

List Price

Onga Air Switch

$315.00

The Onga Single Air Switch is a suitable for switching one appliance on and off with a single push of an air switch button. Ideal to control a spa blower or circulation pump. ■ ■ ■ ■

230/240V 50Hz 10A IP24 Supply Lead. 2m 10A side entry AS/NZ Plug

Air Switch button not supplied. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

169

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

LEISURETIME II Sand Filter

LEISURETIME LSFII FIBREGLASS SAND FILTER Part No.

Size

Connection

Filter area

Sand required

Code

List Price

715‑LSFII‑21‑40

40mm

0.2m2

90Kg

$720.00

715‑LSFII‑25‑40

40mm

0.3m2

160Kg

$865.00

715‑LSFII‑25‑50

50mm

0.3m2

160Kg

$930.00

715‑LSFII‑28‑50

50mm

0.38m2

200Kg

$1350.00

715‑LSFII‑32‑50

50mm

0.5m2

300Kg

$2165.00

The Leisuretime II Fibreglass Sand Filter is the perfect high performance sand filter. It’s incredibly simple to operate and maintain, and it’s built with long-term reliability in mind. Plus, its highly efficient design provides all the clean, crystal clear water your pool requires year after year. Here’s how. Pool water is routed through the sand-filled pressure vessel. The sand traps particles so small they are undetectable to the naked eye. Over time, dirt accumulates in the spaces between the sand particles, causing the pressure in the vessel to rise. This signals you to “backwash” the filter. Simply reverse the water flow and “knock out” the dirt. Pool filter operation doesn’t come any easier. The multi-port valve puts all filter functions right at your fingertips—just rotate the handle to the desired position and the Leisuretime filter does the rest for sure and simple operation. Features & Benefits ■ Spun-woven fibreglass construction for exceptional strength, chemical resistance and long life. UV resistant tank. ■ Stainless steel clamp for corrosion resistance and allows 360 degree rotation of multi-port valve to simplify installation. ■ Top diffuser ensures even distribution of water over the top of the sand bed. ■ Top mount 6-function 1½” or 2” multi-port valve features a pressure gauge, sight glass and manual air relief for optimum filtration efficiency. Large capacity 28” models is available with a 2” valve. Internal design ensures that water is exposed to maximum sand surface area for superior filtration performance and efficient backwashing. ■ Max Pressure 250Kpa

FILTER CAPACITY AND DIMENSIONS Model No.

Max Flow

Minimum backwash flow

Dimensions A

LSFII-21

190LPM

120LPM

875

535

LSFII-25

260LPM

180LPM

980

635

LSFII-350

280LPM

230LPM

1050

723

LSFII-415

350LPM

270LPM

1200

800

FILTER SAND Part No.

712-SAND

Size

Grade

Code

List Price

20kg Bag

16/30 Grade

$24.00

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

170

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

Pool Maintenance Equipment

ONGA PREMIUM VACUUM HOSE Part No.

Code

List Price

344-5116500

38mm x 9m

$140.00

344-5116501

38mm x 12m

$180.00

344-5116502

38mm x 15m

$220.00

Code

List Price

$65.00

VACUUM HEADS - LEAF RAKES - BROOMS ETC Part No.

344-5117117

Telescopic Handle 4.9M

344-5157550

Vacuum Head – Flexible 14”

(Pic 1.)

$38.00

344-R201286

Vacuum Head – Provac 22”

(Pic 2.)

$235.00

344-5164050

Vacuum Head - Vinyl

(Pic 3.)

$28.00

344-5169450

Leaf Scoop – Aluminum

(Pic 4.)

$31.00

344-5190450

Leaf Rake – Deep Bag

(Pic 5.)

$28.00

344-5168650

Pool Broom, Wall Brush

(Pic 6.)

$19.00

Pic 1.

Pic 2.

Pic 3.

Pic 4.

Pic 5.

Pic 6.

TEST KITS Part No.

Code

List Price

344-AQ1014

DPD 2 in 1

$34.00

344-AQ1029

DPD 4 in 1

$64.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

171

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

Pool Maintenance Equipment

PENTAIR CLEAR LEAF TRAP WITH 3’ LENGTH AND 1-1/2IN. HOSE AND BAG Part No.

344-R211084

Leaf Trap clear 186B 1.5

Code

List Price

$325.00

Features snap open and close lid, clear housing, and large handle for ease of carrying. 1-1/2” hose to connect with most Pentair/Kreepy Krauly suction pool cleaners. Traps debris in polyester bag. ■ ■ ■ ■ ■ ■

186 ‘Snap Open’ Leaf Trap Features Snap Open and Close Lid for Easy Access 1-1/2” Hose Connection Polyester Debris Bag for Filtration Included Handle Allows for Easy Cleaning Compatible with Suction Side Pool Cleaners and Vacuum Heads

HAMMERHEAD POOL CLEANER Part No.

344-KO720

Hammerhead Pool Cleaner

Code

List Price

$804.00

The Hammer Head™ pool cleaner is the ultimate in carefree operation. It comes fully assembled. Just add the seal and connect the hoses. No tools required and you’re on cruise control in minutes. It even comes with a free flow gauge and adjustable speed control to ensure optimum performance. Also consider these other hands-free and reliability features: ■ No bags or compartments to empty or replace, dirt and debris go right to your filtration equipment, where they belong. ■ No wheels or gears to jam or diaphragms to replace. ■ No expensive booster pump to buy and operate…it uses your pool’s existing filtration system. ■ Only one operational moving part…only 8 parts in total. ■ All parts are UV stable and chemical resistant for years of dependable service. ■ Sleek, compact design increases maneuverability for best cleaning performance. ■

Specially designed slots and curved “fingers” climb over obstructions so Hammer Head keeps performing unattended and without interruption.

Connects to your skimmer or vacuum line fitting in minutes without tools. Built-in bumper ensures freedom of movement around steps, ladders and other obstacles. Patented seal design with slots and curved “fingers” navigate over and around pool obstacles for total coverage and uninterrupted performance.

ONGA ROBOTIC CLEANER Part No.

344-360275

Pentair Rebel cleaner

Code

List Price

$995.00

The new Rebel cleaner is perfect for thorough cleaning coverage of pools with hard to-clean dirt and debris. Featuring mechanically-programmed, gear-driven, wheels which drive and manoeuvre the Rebel all over the pool floor, up walls and into tight corners, the Rebel bridges the gap between conventional suction cleaners and robotics. It sucks up debris other cleaners miss! Features & Benefits ■ Sure-Flow Turbine— Dirt & debris pass through easily to avoid clogging. ■ Advanced Hydraulic Technology — Ideal for use with variable speed or two-speed pumps. ■ Dual Action Roller Skirt — Maneuvers up and over obstacles for uninterrupted cleaning. ■ Programmed Cleaning Cycle – Assures complete and thorough pool cleaning coverage. ■ Compact Footprint — Effortlessly cleans tight corners and pools with 90 degree angles. ■ Quick-Release Latch — Top access for easy serviceability.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

172

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

Pool Sanitisers

PENTAIR ALALOGUE REVERSE POLARITY SALT CHLORINATOR Model No.

Production Per Hour

Production In 8 Hours

Code

List Price

Chlorine Output

Sod.hypo Equiv

Chlorine Output

Sod.hypo Equiv

344-FFCL-15-RP

15grams/hour

23 grams/ hour

120 grams/ hour

184 grams/ hour

$1550.00

344-FFCL-25-RP

25grams/hour

38 grams/ hour

200 grams/ hour

304 grams/ hour

$1645.00

344-FFCL-35-RP

35grams/hour

35 grams/ hour

280 grams/ hour

432 grams/ hour

$1965.00

Features & Benefits: Simple but Reliable. ■ Low salt operation: 3500-4500ppm (0.35% - 0.45%). ■ Over temperature protection. ■ High efficiency toroidal transformer. ■ Premium grade titanium cell. ■ Over current protection. ■ High quality Panasonic timer. ■ Silicon controlled rectification. ■ Very high chlorine production. ■ Acrylic weather shield. ■ High impact ABS plastic cell housing. ■

To Calculate the chlorine output required: Determine your pool size (litres). ■ Move along the horizontal line until you reach your climate zone. ■ Go down the amount of chlorine you require (g/hr). ■ Always allow an extra 10-20% - if your budget allows for it. ■ In commercial installations allow 100% extra. ■

RAINBOW 320C AUTOMATIC CHLORINE IN-LINE FEEDER Model No.

Treats Pool Size in Litres per 24 hours* Bottom Feed

344-R171096 ■ ■

■ ■

Code

List Price

$220.00

Top Feed

@10ppm

@5ppm

@2.5ppm

@10ppm

@5ppm

@2.5ppm

35,000

72,000

100,000

94,000

188,000

375,000

The efficient, easy way to sanitize your pool or spa. The Rainbow™ 320 automatic chlorine/bromine feeder not only save time, but also reduce manual handling of chemicals. They use large or small Trichlor or Bromine slow-dissolving tablets to make sanitizing your new or existing pool or spa easy and automatic. An external fine control valve lets you adjust the feed rate to meet specific pool or spa requirements The 320 is designed for permanent installation in the return line of new or existing systems, and dispenses sanitizer directly into your pool or spa, downstream of all equipment.

Features: ■ Completely

enclosed system – no special venting required. escaping gases. ■ 50psi maximum operating pressure. ■ No

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

173

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

White Goods

PENTAIR PLUMBING FITTINGS EYEBALL RETURN FITTINGS Part No.

344-08429-0000

Description

Code

List Price

1-1/2 in. Slip, 3/16 in., 1/2 in., 3/4 in., 90° Nozzles, white

$58.00

344-5115000

Eyeball 'Quipmaster'

$25.00

344-5100000

Eyeball Slip Fitting 40mm

$13.00

Description

Code

List Price

Adjustable Floor Inlet

$45.00

5100000

PENTAIR PLUMBING FITTINGS INLET Part No.

344-08417-0000

08417-0000

PENTAIR PLUMBING FITTINGS UNION BARRELS Part No.

Description

Code

List Price

Self Alligning Barrel Union (40mm Internal / 50mm Slip)

$33.00

344-89280109

Barrell Union 1-1/2” BSP Thread to 40mm PVC

$20.00

344-89280110

Barrell Union 2” BSP Thread to 50mm PVC

$31.00

Description

Code

List Price

0-270kPa, Oil Filled, Bottom Mount

$62.00

344-800408

800408

PENTAIR PLUMBING FITTINGS PRESSURE GAUGE Part No.

344-5166700

5166700

PENTAIR PLUMBING FITTINGS 2 WAY AND 3 WAY DIVERTER VALVES Part No.

Description

Code

List Price

344-263037

3-Way PVC 40mm/1-1/2” (50mm/2” slip outside)

$65.00

344-263038

2-Way PVC 40mm/1-1/2” (50mm/2” slip outside)

$58.00

344-263028

3-Way PVC 50mm/2" (65mm/2-1/2" slip outside)

$77.00

344-263029

2-Way PVC 50mm/2” (65mm/2-1/2” slip outside)

$70.00 263028

263029

PENTAIR PLUMBING FITTINGS CHECK VALVES Part No.

Description

Code

List Price

344-702480

Check Valve PVC 40mm/1-1/2” (50mm/2” slip outside)

$55.00

344-263042

Check Valve CPVC 50mm/2" (65mm/2-1/2" slip outside)

$87.00

Full range of Pentair fittings available - please contact Argon Distributors.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

174

263042

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

White Goods

U3 SKIMMERS Part No.

Description

Code

List Price

344-08650-1404

U-3 Skimmer White w/White Lid & Frame, 2 in. Slip with 1-1/2 in. Slip Reducers; Incl. Float and Check Valve, Basket 1 (concrete)

$410.00

U-3 Skimmers feature a heavy-duty one-piece construction with sturdy external ribbing for superior strength. All U-3 Skimmers are made from high-strength ABS plastic. Screw down lockable lid. 1-1/2”/40mm or 2”/50mm slip or threaded ports. Optional equalizer valve. Compliant to AS1926.3

■ ■ ■ ■

QUIPTRON SKIMMER Part No.

344-5315000

Description

Quiptron Skimmer

Code

List Price

$242.00

The Quiptron Skimmer skims a thinner layer of surface water at a higher velocity, resulting in 300 to 500% more surface skimming and it does it at flow rates as low as 40LPM. Conventional skimmers require flow rates of 100LPM or more. The weir is responsible for the Quiptron Skimmers’s efficiency. Its hydrodynamic shape creates a lifting action on the wier, much like an airplane wing. This uplift speeds up the surface flow and eliminates ineffective deep currents. ■ ■ ■

Direct replacement for thousands of skimmers sold and installed trhough Australia. One piece body-no glue joints for potential leaks. Robust moulded basket locks in with bayonet action.

PENTAIR MAIN DRAIN Part No.

344-1022000

Description

Code

List Price

Main drain & hydrostatic Relief Valve with Pilot Tube and Cover

$252.00

High quality Onga main drains incorporate dual ports, hydrostatic relief valve and pilot tube. High quality construction and a proven performer for over a decade. ■ ■ ■ ■

Screw down lockable lid. Includes hydrostatic valve and pilot tube. Compliant to AS1926.3. 1 year replacement warranty

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

175

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

POOL & SPA

Notes MiniBlaze & Blazemaster - Loncin Engine

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

176

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Index

181

180

SURFACE PUMPS Hydropak Silent Booster

182

184

DJS Series

190

186

JET Series

220

1 203

Ultra Series

2231

223

225

K Series

226 139

230

KP Series

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

ODS Series

KA Series

228

KD Series

MVI Series

OD Series

224 1

227

1 206

222

PL Series

PM Series

JAP Series

DMI Series

222

MVI Series motors

188

JB Series

192

DHM Series

Jexi Junior Series

231

KL Series 178

KC Series

BK Series

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Index

233

232

M Series Classic

K Series Classic

236

234

SPK Series

242

CN Series

246

244

BSN Series

248

SPR Series

253

SPO80 Series

252

CRD Series

258

CRT Series

259

Albajet Series

CKD Series

261

Jimmy 90 Booster

245

249

256

260

SPM Series

ING Series

CDP Series

CDX Series

235

263

262

CKRS Inline Circulator

CLP Series

EEM Series

Gear Pumps

264

MDP Series Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

179

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Hydropak Silent Booster

HYDROPAK SILENT BOOSTER PUMPS Head Part No.

Phase

Voltage

230-HP050

230

0.5

230-HP100

230

1.0

Flow

Rated (M)

Max. (M)

Rated (L/min)

.37

14.5

0.8

17.0

Pipe Connection

Code

List Price

25mm

$495.00

25mm

$575.00

Max. (L/min)

The Davies Hydropak series is an All-in-One self-priming booster pump, the compact design combines pressure tank, pressure switch, flow switch and dry run protection with efficient, quiet turbine pump mounted to plastic base for economical pressure boosting solution. LED indicator light gives pump status, 24 hours standby self-test prevents impeller lock, pressure switch can be simply adjusted to change cut in pressure and delayed shut down gives smother operation. Pump and motor have baked epoxy finish for high corrosion resistance and inlet has strainer to prevent solids entering pump casing. Motor and pump protected with over temperature cut outs and pump has auto re-start function after run dry failure. n n

Maximum liquid temperature: 40ºC. Ambient Temperature: 0ºC - 40ºC.

Motor Feature: n Motor Type: 2 Pole. n Frequency: 50 Hz. n IP54. n Nominal Speed: 2850 rpm.

O S G N I M O C S L E NEW MOD

Applications: n Water pressure boosting. n Water transferring. n Water circulating. Features: n Easy setup installation and maintenance. n Quite operation. n Robust construction. n Self priming. n All-in-one compact design. n Suction strainer. n Non return valve. Material Features: n Motor Frame: Aluminium. n Pump Casting: Cast Iron. n Mechanical Seal: Ceramic-Carbon-NBR. n Impeller: Brass. Performance: 50 45 40 HP0100

35 30 25

HP050 HEAD (M)

20 15 10 5 0 0

FLOW (LPM)

DIMENSION AND SPECIFICATIONS Part No.

230-HP050 230-HP100

21 15

22 28

278 302

11 14.5

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

180

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Jexi Junior Series

JEXI JUNIOR SERIES Part No.

Volts

Max Amps

Code

List Price

220-JEXIJR-5

0.5

0.37

230

2.5

$360.00

220-JEXIJR-10

1.0

0.75

230

$440.00

The Jexi-Junior Series jet pump from the Areta range have many applications, tank filling from rivers and wells, house supply and system pressure boosting. Can be supplied with auto-controller or as pressure tank/pressure switch style. Features: 304 Stainless steel impeller, seal plate and pump body. 410 stainless steel shaft. Molded Diffuser/venturi. Carbon/ceramic mechanical seal. Suction lift up to 7m. Made in Taiwan.

n n n n n n

JEXI JUNIOR - AUTO CONTROLLER SYSTEMS Part No.

Controller

Code

List Price

230-JEXIJR-5E

Compact 2

$485.00

230-JEXIJR-10E

Compact 2

$575.00

Pressure Tank

Code

List Price

230-TM-JEXIJR-5

$550.00

230-TM-JEXIJR-10

18L

$670.00

Pressure System supplied with pump, quick connect union and auto controller. Compact 2 auto controller features: n Turn on pressure 1.5bar. n Auto Restart following run dry. n Pressure gauge. n Pre-wired plug 8 play. JEXI JUNIOR - PRESSURE TANK SYSTEMS Part No.

Pressure Tank System supplied with pump, PM5-PW pressure switch, pressure gauge, check valve and pressure tank n Pressure switch cut-in/cut-out pre-set 20-40psi. n No run dry protection.

JEXI Junior

Performance: 45

Add a Pump Cover see pg 394

35 30 JEXI JR 10

25 HEAD (M)

JEXI JR 5

20 15 10 5 0 0

FLOW (LPM)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

50 181

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

DJS Series

DJS SERIES Part No.

Phase

Volts

Amps

Code

List Price

220-DJS80M

0.8

0.6

230

2.9

$575.00

220-DJS100M

1.0

0.75

230

4.5

$725.00

220-DJS120M

1.2

0.9

230

5.2

$775.00

The DJS Jet assisted pumps are particularly suited to deep or long suction situations – below ground tanks, creeks, rivers and dams. Self-Priming and very tolerant to suction lines in poor condition or undersized. Technical Features: n Max working pressure: 6bar. n Max liquid temperature: +45oC. Motor Features: n TEFC continuous duty motor. n Class F Insulation. n Ambient temperature range: -15 to +40oC n Internal overload protector. n IP55 protection.

cutaway

Construction Materials n Pump casing, Seal plate , pump shaft & Impeller: 304 Stainless steel. n Mechanical seal: DJS80 – Carbon/Ceramic. DJS100&120 – Silicon/Carbon. n Diffuser/Venturi: Glass reinforced Plastic. n O Rings: EPDM. n Motor mount and casing: Aluminium.

Performance:

Add a Pump Cover see pg 394

DJS series

HEAD (M) 30

DJS80

DJS100

DJS120

0 0

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS A

DNA

DNM

DJS80

Model No.

100

170

380

174

126

200

130

100

1”

8.0

DJS100

100

213

425

206

152

217

160

145

1 ¼”

1”

11.5

DJS120

100

213

425

206

152

217

160

145

1 ¼”

1”

11.5

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

182

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

DJS Series Pressure Systems

DAVIES DJS PRESSURE SYSTEM – WITH HYDROGENIE 2 CONTROLLER Part No.

230-DJS80-H2

Phase

Controller

Code

List Price

0.8

Hydrogenie 2

$840.00

230-DJS100-H2

1.0

Hydrogenie 2

$990.00

230-DJS120-H2

1.2

Hydrogenie 2

$1050.00

Supplied with: n Hydrogenie 2 prewired auto controller. n Connection union. Controller Features: n Run dry protection. n Auto restart following run dry -10 attempts for 5 seconds over 24hour period. n 24 hour anti-Jamming function – following 24 hours of nil usage, pump will run for 5 seconds. DAVIES DJS PRESSURE SYSTEM –WITH HYDROGENIE 3 CONTROLLER AND PRESSURE TANK Part No.

Phase

Controller

P/Tank

Code

List Price

230-DJS80-H32

0.8

Hydrogenie 3

2.8L

$980.00

230-DJS100-H32

1.0

Hydrogenie 3

2.8L

$1140.00

230-DJS120-H32

1.2

Hydrogenie 3

2.8L

$1180.00

REDUCE PUMP CYCLES

Supplied with: n Hydrogenie 3 prewired auto controller. n Connection union. n Brass tee. n Pressure tank. n Pressure gauge. Controller Features: n Run dry protection. n Auto restart following run dry -10 attempts for 5 seconds over 24hour period. n 24 hour anti-Jamming function – following 24 hours of nil usage, pump will run for 5 seconds. n Adjustable cut-in pressure: 1.5, 2.0 & 2.5bar. DAVIES DJS PRESSURE SYSTEM – VERTICAL PRESSURE TANK/PRESSURE SWITCH TYPE HP

Phase

Tank Size

Code

List Price

230-DJS80-P8

Part No.

0.8

$810.00

230-DJS100-P18

1.0

$1010.00

230-DJS120-P24

1.2

$1100.00

Supplied with: n Pressure tank. n Pressure switch. n Check valve. n 5 Way tee. n Pressure switch union. n Prewired. n Some assembly required.

Note: No run dry protection. Some assembly required.

DAVIES DJS PRESSURE SYSTEM – HORIZONTAL PRESSURE TANK/PRESSURE SWITCH TYPE HP

Phase

Tank Size

Code

List Price

230-DJS80-P18H

Part No.

0.8

$930.00

230-DJS100-P24H

1.0

$1150.00

230-DJS120-P24H

1.2

$1180.00

Supplied with: n Pressure tank. n Pressure switch. n Check valve. n 5 Way tee. n Prewired. n Tank connection hose. Note: No run dry protection. Some assembly required. See pump accessories section for more details. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

183

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

JET Series

DAVIES JET SERIES Part No.

220-JET61M 220-JET83M 220-JET103M 220-JET123M 220-JET152M 220-JET202M 220-JET202T 220-JET302M 220-JET302T

Phase

Volts

Amps

Code

List Price

0.6 0.8 1.0 1.2 1.5 2.0 2.0 3.0 3.0

0.44 0.59 0.74 0.88 1.1 1.5 1.5 2.2 2.2

1 1 1 1 1 1 3 1 3

230 230 230 230 230 230 400 230 400

2.6 3.7 4.8 5.1 9.0 11.0 4.2 12.0 5.0

D D D D D D D D D

$505.00 $545.00 $560.00 $625.00 $1125.00 $1220.00 $1220.00 $1330.00 $1330.00

JET61-JET122

The JET series with their proven reliability and excellent self-priming ability make them a valuable asset to any house or farm water supply system. Jet/venturi design allows suction lift up to 8m – great for drawing from rivers, dams & ponds, shallow wells/bores and underground tanks. Easy to prime and handle suction air leaks. n Max pumped liquid temperature: 60°C. n Max ambient temperature: 40°C.

JET152-JET302

Motor Features: n Asynchronous, squirrel cage type, enclosed with external cooling. n Overload protection: Single phase version incorporate auto reset overload protection, Three phase versions require overload protection supplied by user. n Insulation: Class F. n Duty: S1. Construction Materials: n Pump body: cast iron G20. n Motor bracket: cast iron n Diffuser, Nozzle & venturi tube: Techno polymer. n Impeller: Techno-polymer for JET61-83, Stainless jet 102-123, Stamped brass for JET152-302. n Pump shaft: AISI 420F Stainless steel for JET61-122, AISI 304 for JET152-302 series. n Mechanical seal: Carbon ceramic.

Add a Pump Cover see pg 394

Performance:

JET Series

65 60 55 50 45

A B

HEAD (M)

DNA

40 35 30

DNM

JET302

JET202

JET123

25 20 15

JET152

JET103

JET83

JET152

JET102 JET82

JET61

JET122

JET202

JET61

5 0

100

120

140

160

F G

180

B DNM

DNA

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model

JET 61 JET 82 JET 102 JET 122 JET 152 JET 202 JET 302M JET 302T

DNA

380 420 420 420 520 520 567 567

110 122 122 122 160 160 160 160

195 210 210 210 235 235 235 235

195 225 225 225 285 285 285 285

155 160 160 160 180 180 180 180

140 140 140 140 180 180 180 180

180 180 180 180 230 230 230 230

9 9 9 9 11 11 11 11

95 95 95 95 120 120 120 120

1” 1” 1” 1” 1” ½ 1” ½ 1” ½ 1” ½

1” 1” 1” 1” 1” ¼ 1” ¼ 1” ¼ 1” ¼

11.1 13 15 16 29.5 31.5 35.5 31.5

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

184

H D

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

F G

SURFACE PUMPS

JET Series Pressure Systems

DAVIES JET PRESSURE SYSTEM – AUTO CONTROLLER TYPE Part No.

Phase

Controller

Code

List Price

230-JET61-H1

0.6

Hydrogenie 1

$745.00

230-JET82-H1

0.8

Hydrogenie 1

$785.00

230-JET102-H2

1.0

Hydrogenie 2

$840.00

230-JET122-H2

1.2

Hydrogenie 2

$905.00

230-JET152M-H2

1.5

Hydrogenie 2

$1415.00

Supplied with: n Connection union. n Prewired Hydrogenie 1 or 2 controller. DAVIES JET PRESSURE SYSTEM – VERTICAL PRESSURE TANK/PRESSURE SWITCH TYPE Part No.

Phase

230-JET61-P8

0.6

230-JET82-P18

0.8

Tank size

Code

List Price

$780.00

$82000

230-JET102-P18

1.0

$835.00

230-JET122-P24

1.2

$925.00

230-JET152M-P24

1.5

$1485.00

REDUCE PUMP CYCLES

Supplied with: n Pressure tank. n Pressure switch and union. n Pressure gauge. n Check valve. n 5 Way tee. n Prewired. DAVIES JET PRESSURE SYSTEM – HORIZONTAL PRESSURE TANK/PRESSURE SWITCH TYPE Part No.

Phase

Tank size

Code

List Price

230-JET61-P18H

0.6

$886.00

230-JET82-P18H

0.8

$930.00

230-JET102-P24H

1.0

$975.00

230-JET122-P24H

1.2

$1040.00

230-JET152M-P58H

1.5

$1810.00

230-JET202M-P58H

2.0

$1905.00

230-JET302M-P80H

3.0

$2110.00

Supplied with: n Pressure tank. n Pressure switch and union. n Pressure gauge. n Check valve. n 5 Way tee. n Prewired. DAVIES JET PRESSURE SYSTEM – HYDROGENIE CONTROLLER Part No.

230-JET152M-H4

Controller

Code

List Price

1.5

Hydrogenie 4

$1620.00

230-JET202M-H4

2.0

Hydrogenie 4

$1730.00

230-JET202T-H5

2.0

Hydrogenie 5

$1975.00

230-JET302M-H4

3.0

Hydrogenie 4

$1840.00

230-JET302T-H5

3.0

Hydrogenie 5

$2095.00

Supplied with: n Hydrogenie 4 or 5 controller. n Connection union. n Prewired and test run. Note: A pressure tank is required, size depends on application and controller mode (on/off or pressure dependent). Please call Argon to assist with correct size pressure tank. See pump accessories section for more details. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

185

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

JB Series

DAVIES JB SERIES Part No.

Phase

Volts

Amps

Code

List Price

220-JB151M

1.5

1.1

230

8.3

$1150.00

220-JB151T

1.5

1.1

400

4.0

$1150.00

220-JB201M

2.0

1.47

230

9.8

$1250.00

220-JB201T

2.0

1.47

400

4.2

$1250.00

220-JB301T

3.0

2.2

400

5.4

$1395.00

The JB series twin impeller pumps offer quiet efficient pumping with the ability to draw water from wells/tank 8-9m below pump. Excellent suction capacity with large venturi design. n n

Max pumped liquid temperature: 60°C. Max ambient temperature: 40°C.

Motor Features: n Closed auto-ventilated motor with protection IPX4, two poles, class F insulation. n Overload protection: Single phase version incorporate auto reset overload protection, Three phase versions require overload protection supplied by user. n Continuous duty. Construction Materials: n Pump body: Cast iron G20 with anti-corrosive coating. n Motor bracket: Cast iron G20 with anti-corrosive coating. n Diffuser, Nozzle & Venturi tube: GE Noryl® GFN2. n Pump shaft: Stainless steel Aisi 420A. n Mechanical seal: Carbon-ceramics. n Impellers: Stamped Brass.

JB Series

Performance: Note: Pump pressure must not fall below minimum shown on the graph – can cause pump damage. 65 60 55 50 45 40 35

JB151

HEAD (M) 30

JB301C

JB201

DNM

JB301 JB201

DNA

JB151

E D

10 B

DNM

DNA

100

120

140

FLOW (LPM)

160 A

DIMENSIONS AND SPECIFICATIONS Model

JB 151

209

257

596

266

JB 201

209

257

596

JB 301

209

257

596

DNA

174

104

120

248

1”½

1”

29.2

266

174

104

120

248

1”½

1”

30.8

266

174

104

120

248

1”½

1”

30.6

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

186

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

JB Series Pressure Systems

DAVIES JB PRESSURE SYSTEM – WITH HYDROGENIE 4 OR 5 CONTROLLER Part No.

Controller

Code

List Price

230-JB151M-H4

1.5

Hydrogenie 4

$1675.00

230-JB151T-H5

1.5

Hydrogenie 5

$1950.00

230-JB201M-H4

2.0

Hydrogenie 4

$1775.00

230-JB201T-H5

3.0

Hydrogenie 5

$2050.00

230-JB301T-H5

3.0

Hydrogenie 5

$2225.00

Supplied with: n Connection union. n Prewired Hydrogenie n Prewired and tested.

4 or 5 controller.

Note: a pressure tank is required, size depends on application and controller mode (on/off or pressure dependent). DAVIES JB PRESSURE SYSTEM WITH HYDROGENIE 4 OR 5 CONTROLLER & PRESSURE TANK Part No.

Controller

Tank Size

Code

List Price

230-JB151M-H424

1.5

Hydrogenie 4

$2210.00

230-JB151T-H524

2.0

Hydrogenie 5

$2460.00

230-JB201M-H424

2.0

Hydrogenie 4

$227500

230-JB201T-H524

3.0

Hydrogenie 5

$2525.00

230-JB301T-H524

3.0

Hydrogenie 5

$2710.00

Supplied with: Connection union. Prewired Hydrogenie 4 or 5 controller. Base mount plate. Pressure tank. Prewired and test run. n Check valve. n n n n n

Controller Features: 230v Single phase. Max 16A rated. Max 10bar rated. Motor overload and run dry protection with auto restart function. Start pressure range 1-5bar (on/off mode, presscontrol type operation). Max start pressure 6.5bar (pressure dependent mode, pressure switch type operation). Max stop pressure 7 bar (pressure dependent mode). IP55 protection. Adjustable start and stop delay. Instantaneous digital screen displays: Line pressure, set pressure, Amp draw, Flow sensor position, controller temperature.

Controller Features: 230v Single phase or 400v Three phase. Max 10A rated (per phase). Max 10bar rated. Motor overload and run dry protection with auto restart function. Over and under voltage protection. Short between phases protection. Start pressure range 1-5bar (on/off mode). Max start pressure 6.5bar (pressure dependent mode). Max stop pressure 7 bar (pressure dependent mode). IP55 protection. Adjustable start and stop delay. Instantaneous digital screen displays: Line pressure, set pressure, Amp draw, Flow sensor position, controller temperature.

See Controllers on pg 408

See pump accessories section for more details.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

187

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

JAP Deep Well

DAVIES JAP DEEP WELL SERIES Part No.

Phase

Volts

Amps

Code

List Price

220-JAP 102M

0.74

230

4.1

$675.00

220-JAP 151M

1.5

1.1

230

7.9

$1195.00

220-JAP 151T

1.5

1.1

230/400

6.1/3.5

$1195.00

220-JAP 201M

1.5

230

10.3

$1250.00

222-JAP 201T

1.5

230/400

6.6-3.8

$1250.00

The JAP series pump have been designed to pump clean water from wells/ bores of at least 4” diameter up to 50m deep, or from a water source a long distance from power supply. JAPSI-201 Models have a twin impeller design for extra performance. n n n

Max pumped liquid temperature: 60°C. Max ambient temperature: 40°C. Complete with E30 ejector. (if E20 ejector required please specify).

Construction Material: n Closed auto-ventilated motor with protection IPX4, two poles, class F insulation. n Single-phase with incorporated motor protector and capacitor permanently connected. n Three-phase with compulsory protection to be provided by the user. n Continuous duty. Technical Features: n Pump body: Cast iron G20 with anti-corrosive coating. n Motor bracket: In die casting aluminium UNI 5076 and stainless steel Aisi 304 (cast iron for Jap 150-200). n Ejector: Cast iron G20 with anti-corrosive coating. n Diffuser, Nozzle & Venturi tube: GE Noryl® GFN2. n Impellers, GE Noryl GFNZ, JAP102, (stamped brass UNI-EN 12165 available on demand). (stamped brass for JAP15-201) n Pump shaft: Stainless steel Aisi 420A. n Mechanical seal: Carbon-ceramics. Installation: Before installing the pump, verify that all the pipes are clean inside to avoid any obstruction in the ejector nozzle. n A foot valve must be installed at the foot of the ejector. n After the pump is installed, fill pipes with clean water. n To preserve an efficient priming a specific pressure in the circuit is necessary – a gate valve on the discharge can achieve this. Note: Minimum pump operating heads must be observed.

Ø 1"1/4 Ø 1"

DNA

315

Ø1 "

E D

DNM

DNA H1

Ø 1"

E D

G A

Ø1 "

DIMENSIONS AND SPECIFICATIONS Model

JAP 101

DNA

DNM

160

370

180

140

100

188

1”¼

1”

14.3

JAP 151

125

415

226

174

104

120

248

1”¼

1”

27.3

JAP 201

125

415

226

174

104

120

248

1”¼

1”

28.9

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

188

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

JAP Deep Well

1" 1/4 G.

1" G.

Installation:

96,5

Before installing the pump verify that all the tubes (iron, plastic or rubber) are clean inside to avoid any obstruction to the ejector nozzle. A foot valve or a check valve must be installed at the foot of the ejector. After the pump is installed, fill tubes and pump body completely with clean water. To preservean efficient priming a specific pressure in the circuit is necessary, therefore it is recommended to install a membrane tank at the delivery of the pump.

Performance:

TYPE

Nominal power

Input power [W]

Single-phase Three-phase a

Capacitor

Input current

Capacitor 450 V max

Input current

[µF]

1~230V 3~230V 3~400V

Capacity Q [m3/h] Ejector Suction depth Q [l/1'] [m]

[A]

E20 JAP 102 M JAP 102 T

0.74

930 970

4.1

3.1

1.8

E30 E20

JAP 151 M JAP 151 T

1.1 1.5 1800 1910

7.9

6.1

3.5 E30 E20

JAP 201 M JAP 201 T

1.47

2340 2100

10.3

6.6

3.8 E30

a) single phase 230V a) ~ Monofase 230 V

15 20 25 30 35 15 20 25 35 40 50 15 20 25 35 40 50

0.18 0.36 3 6

0.6 10

1.2 20

1.5 1.8 2.1 25 30 35

3.6 60

Total head (m W.C.)

31 28 30 28 40 38

28 25 27 20 38 36

25 22 18 13 36 32 40 38 33

22 15 8

31 26 32 30 20

28 21 15

24 17

H [m]

52 43 40

49 47

b) three phase 230/400V

0.9 15

41 30 15

50 42 30

35 19

40 36

37 30 27

32 27 25

25 20

43 40

43 39 31

35 28 24

23 17

b) ~ Trifase 230/400 V

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

189

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

DHM Series

DAVIES DHM SERIES – STAINLESS STEEL HORIZONTAL MULTI-STAGE Part No.

Volts

Phase

Amps

Code

List Price

220-DHM2-30

0.4

0.3

230

2.2

$575.00

220-DHM2-40

0.5

0.37

230

2.8

$630.00

220-DHM2-50

0.6

0.5

230

3.2

$725.00

220-DHM2-60

0.8

0.6

230

3.7

$785.00

220-DHM2-60T

0.8

0.6

230/400

2.9/1.7

$785.00

220-DHM4-40

1.0

0.75

230

4.4

$735.00

220-DHM4-50

1.2

0.93

230

5.3

$835.00

220-DHM4-60

1.5

1.1

230

6.7

$895.00

220-DHM4-60T

1.5

1.1

230/400

5.1/2.9

$895.00

The Davies DHM series are a multistage stainless steel pump built for years of trouble free service. All parts of the pump that are in contact with the liquid are made of stainless steel for corrosion resistance. The DHM pumps provide outstanding reliability in Domestic pressure boosting, liquid transfer in industry and farming applications, air-conditioning and cooling systems and specialized OEM equipment. The mechanical seal is of high quality Silicon carbide/carbon with EPDM elastomers for long service life. Technical Features: n Liquid temperature range: 0°C to +90°C. n Maximum ambient temperature: +50°C. n Maximum operating pressure: 10bar 0°C to 40°. n Full wet end parts in 304 stainless steel. n Pump shaft in 431 stainless steel. n Mechanical seal: Silicon carbide/carbon. n O rings: EPDM.

Add a Pump Cover see pg 394

Motor Features: n Totally enclosed, fan cooled. n IP54 enclosure. n 50Hz 220-240V 1 phase. n 50Hz 230-400V 3 phase. Performance:

DHM4 Series

DHM2 Series

DHM2-60

DHM4-60 50

HEAD (M)

DHM2-50

DHM2-40

DHM2-60 HEAD (M) 30 DHM2-50

DHM2-30

DHM4-50

DHM4-40 DHM4-60 DHM4-50

DHM2-4025

DHM4-40

DHM2-30

100

120

140

100

120

140

6 NPSHr (M)

80 FLOW (LPM)

FLOW (LPM)

NPSHr (M)

2 0 0

FLOW (LPM)

60 FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model

DHM2-30 DHM2-40 DHM2-50 DHM2-60 DHM4-40 DHM4-50 DHM4-60

DNA

DNM

327 345 363 381 372 438 465

81 99 117 135 126 153 180

119 137 155 173 164 191 218

141 141 141 141 141 141 141

133 133 133 133 133 133 133

160 160 160 160 160 160 160

1” 1” 1” 1” 1¼” 1¼” 1¼”

1” 1” 1” 1” 1” 1” 1”

9.4 9.6 10.4 10.7 10.4 11.3 13.4

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

190

DNM DNA

DNA

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

DHM Series Pressure Systems

DAVIES DHM PRESSURE SYSTEM – WITH HYDROGENIE 2 CONTROLLER Part No.

L/M (KPA)

250

350

0.37

230-DHM2-50-H2

0.45

230-DHM2-60-H2

0.56

230-DHM2-40-H2

230-DHM4-40-H2

0.7

230-DHM4-50-H2

0.92

230-DHM4-60-H2

1.05

105

Controller

Code

List Price

Hydrogenie 2

$910.00

Hydrogenie 2

$1005.00

Hydrogenie 2

$1065.00

Hydrogenie 2

$1015.00

Hydrogenie 2

$1115.00

Hydrogenie 2

$1175.00

450

Controller Features: n Run dry protection. n Auto restart following run dry -10 attempts for 5 seconds over 24hour period. n 24 hour anti-Jamming function – following 24 hours of nil usage, pump will run for 5 seconds.

Supplied with: n Hydrogenie 2 prewired auto controller. n Connection union.

DAVIES DHM PRESSURE SYSTEM – WITH HYDROGENIE 3 CONTROLLER & PRESSURE TANK L/M (KPA)

Part No.

230-DHM2-50-H32

0.45

230-DHM2-60-H32

0.56

230-DHM4-50-H32

0.92

230-DHM4-60-H32

1.05

105

Controller

Code

List Price

$1140.00

250

350

450

Hydrogenie 3

$1195.00

Hydrogenie 3

$1240.00

Hydrogenie 3

$1310.00

Pressure Tank

Code

List Price

$895.00

REDUCE PUMP CYCLES

Controller feature: n Run dry protection and adjustable cut-in pressure: 1.5, 2.0 & 2.5bar. n Auto restart following run dry -10 attempts for 5 seconds over 24hour period. n 24 hour anti-Jamming function – following 24 hours of nil usage, pump will run for 5 seconds. n Prewired Hydrogenie 3 Auto controller with pressure gauge. n Connection union and Brass Tee. n 2.8Litre pressure tank. DAVIES DHM PRESSURE SYSTEM – WITH PRESSURE SWITCH/PRESSURE TANK Part No.

L/M (KPA)

250

350

0.37

230-DHM2-50-P18

0.45

18L

$1010.00

230-DHM2-60-P18

0.56

18L

$1070.00

230-DHM2-40-P8

230-DHM4-40-P18

0.7

230-DHM4-50-P24

0.92

230-DHM4-60-P24

1.05

105

450

Supplied with: n XMP Pressure switch and union. n 5 Way tee. n Check Valve. Note: No run dry protection. Some assembly required.

18L

$1050.00

24L

$1175.00

24L

$1235.00

Pressure Gauge.

Pressure Tank.

CONSTANT PRESSURE

DAVIES DHM PRESSURE SYSTEM – WITH PRESSURE SWITCH/PRESSURE TANK Part No.

L/M (KPA) 300

300

Pressure Tank

Code

List Price

230-DHM2-60T-H152

0.6

2.8

$1975.00

230-DHM4-60T-H152

1.1

2.8

$2090.00

Supplied with: n HG15 VFD Controller + Transducer. 230V Single phase power supply. n 5-way tee + Check Valve + Union n 2.8L Pressure Tank Features: n Run Dry Protection n Constant Pressure Variable speed n Power Savings Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

191

Pressure Gauge

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Ultra Series

ULTRA SERIES STAINLESS STEEL MULTISTAGE PUMPS The Flagship in the Davies range of house/farm water supply pumps is the ULTRA series - Quiet, compact, full stainless steel wet end and a wide range of models to suit your application. Features: ■ 304 Stainless steel impellers, Diffusers, seal plate & Pump casing. ■ 303 Stainless steel pump shaft. ■ Quiet & Low running cost. ■ Offset suction for improved suction ability (3S & 5S models only). ■ -15oc to +110oc operating temperature. Typical Applications: ■ House and farm water supply. ■ Pressure boosting. ■ Water treatment. ■ Industrial circulation. ■ Hot water cleaning systems. Pump Type ■ Horizontal non self-priming multistage centrifugal pump for pumping clean, thin, non-explosive, non flammable fluids, free of solid particles, sand and fibers. Motor Features: ■ Totally enclosed, fan cooled standard squirrel frame type motor. ■ Rated speed: 2850 RPM - 50Hz. ■ Single phase voltage range: 220-240V PSC. ■ Three phase voltage range: 220-240v Delta/380-415v star. ■ Insulation: Class F. ■ Protection: IP54 . ■ Single phase versions fitted with auto reset internal overload. ■ Three phase version require user supplied overload to be fitted in installation. Operation limitations: ■ Maximum ambient temperature: +40oC. ■ Liquid temperature range: -15oc to + 110oC. ■ Maximum operating pressure: 8.5bar/125PSI.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

192

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Ultra Series

QUICK SELECTION PERFORMANCE TABLE Model

M3/H

L/M

1.2 20

2.4

3.6

3S-70/3

0.7

0.55

4.8

6.0

7.2

8.4

9.6

14.4

21.6

100

120

140

160

200

240

300

360

420

3S-90/4

0.9

0.66

3S-100/5

1.0

0.75

3S-120/6

1.2

0.9

3S-150/7

1.5

1.1

5S-80/3

0.8

0.6

5S-120/4

1.2

0.9

5S-150/5

1.5

1.1

5S-180/6

1.8

1.3

5S-200/7

2.0

1.5

7S-100/2

1.0

0.75

7S-120/3

1.2

0.9

7S-180/4

1.8

1.3

7S-250/5

2.5

1.85

7S-300/6

3.0

2.2

7S-350/7

3.5

2.57

9S-100/2

1.0

0.75

9S-150/3

1.5

1.1

9S-200/4

2.0

1.5

9S-250/5

2.5

H (M)

1.85

18S-180/2 1.8

1.3

18S-250/3 2.5

1.85

18S-400/4 4.0

3.0

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

193

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Ultra Series 3S

DAVIES ULTRA 3S SERIES Part No.

220-ULTRA 3S-90/4

Phase

Volts

Amps

Code

List Price

0.9

0.66

230

4.0

$900.00

220-ULTRA 3S-100/5

1.0

0.75

230

4.8

$1030.00

220-ULTRA 3S-120/6

1.2

0.9

230

5.6

$1125.00

220-ULTRA 3S-120/6T

1.2

0.9

230/400

4.3/2.5

$1125.00

220-ULTRA 3S-150/7

1.5

1.1

230

7.1

$1580.00

220-ULTRA 3S-150/7T

1.5

1.1

230/400

5/2.9

$1580.00

Performance:

ULTRA 3S

90 80 3S-150/7

70 60

3S-120/6

3S-100/5

HEAD (M)

3S-90/4

30 20 10 0 0

40 50 FLOW (LPM)

FLOW (LPM)

10 8 6 NPSHr (M)

4 2 0

DIMENSIONS AND SPECIFICATIONS Model

DNA

DNM

ULTRA 3S-70/3

1”

167

103

333

164

140

178

190

128

192

ULTRA 3S-90/4

1”

191

127

357

164

140

178

190

128

192

9.4

ULTRA 3S-100/5

1”

215

151

404

164

140

178

203

105

128

192

ULTRA 3S-120/6

1”

239

175

428

164

140

178

203

105

128

192

12.7

ULTRA 3S-150/7

1”

263

199

483

164

140

201

211

128

134

198

16.1

ULTRA 3S-150/7T

1”

263

199

483

164

140

201

211

128

134

198

16.1

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

194

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Ultra Series 3S Pressure Systems

DAVIES ULTRA 3 PRESSURE SYSTEM – WITH HYDROGENIE 2 CONTROLLER Part No.

L/M (KPA)

Pump

230-UL0309-H2

3S-90/4

0.66

230-UL0310-H2

3S-100/5

0.75

230-UL0312-H2

3S-120/6

0.9

230-UL0315-H2

3S-150/7

1.1

350

450

Controller

Code

List Price

Hydrogenie 2

$1180.00

Hydrogenie 2

$1310.00

Hydrogenie 2

$1405.00

Hydrogenie 2

$1860.00

550

Supplied with: Prewired Hydrogenie 2 Auto controller. Connection union.

■ ■

Add a Pump Cover see pg 394

Controller Features: ■ Run dry protection. ■ Auto restart following run dry -10 attempts for 5 seconds over 24hour period. ■ 24 hour anti-Jamming function – following 24 hours of nil usage, pump will run for 5 seconds.

DAVIES ULTRA 3 PRESSURE SYSTEM – WITH HYDROGENIE 3 CONTROLLER & PRESSURE TANK Part No.

230-UL0309-H32

L/M (KPA)

Pump

3S-90/4

0.66

350

450

550

Controller

Code

List Price

Hydrogenie 3

$1315.00

230-UL0310-H32

3S-100/5

0.75

Hydrogenie 3

$1445.00

230-UL0312-H32

3S-120/6

0.9

Hydrogenie 3

$1545.00

230-UL0315-H32

3S-150/7

1.1

Hydrogenie 3

$1995.00

Supplied with: Prewired Hydrogenie 3 Auto controller with pressure gauge Connection union Brass tee 2.8Litre pressure tank

■ ■ ■ ■

DAVIES ULTRA 3 PRESSURE SYSTEM – WITH HYDROGENIE 8 VFD & PRESSURE TANK Part No.

Pump

230-UL0312-H818

3S-120/6T

230-UL0315-H818

3S-150/7T

L/M (KPA)

Controller

Code

List Price

Hydrogenie 8

$2700.00

Hydrogenie 8

$3160.00

350

450

550

0.9

1.1

CONSTANT PRESSURE

Supplied with: Hydrogenie 8 Inverter speed controller (single phase supply). Galv Base mounting stand. 8 Litre pressure tank and connection hose. Check valve and Ball valve. Assembled and test run.

■ ■ ■ ■ ■

Controller Features: ■ Run dry protection. ■ Energy saving variable speed technology. ■ Electrical fluctuation protection. ■ Digital display. See pump accessories section for more details. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

195

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Ultra Series 5S

DAVIES ULTRA 5S SERIES HP

Phase

Volts

Amps

Code

List Price

220-ULTRA 5S-80/3

0.8

0.6

230

3.8

$850.00

220-ULTRA 5S-120/4

1.2

0.9

230

4.9

$970.00

220-ULTRA 5S-120/4T

1.2

0.9

230/400

4.1/2.4

$970.00

220-ULTRA 5S-150/5

1.5

1.1

230

6.5

$1420.00

220-ULTRA 5S-150/5T

1.5

1.1

230/400

4.6/2.7

$1420.00

220-ULTRA 5S-180/6

1.8

1.3

230

7.3

$1550.00

220-ULTRA 5S-200/7

2.0

1.5

230

8.7

$1750.00

220-ULTRA 5S-200/7T

2.0

1.5

230/400

5.6/3.3

$1750.00

Part No.

Performance:

ULTRA 5S

90 80 5S-200/7

5S-180/6

5S-150/5

50 HEAD (M)

5S-120/4

40 30

20 10 0 0

FLOW (LPM)

100

120

140

160

100

120

140

160

10 8 6 NPSHr (M)

4 2 0 80 FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model No.

DNA

DNM

ULTRA 5S-70/2

1”

167

103

333

164

140

178

195

128

192

7.7

ULTRA 5S-80/3

1”

167

103

357

164

140

178

203

128

192

10.3

ULTRA 5S-120/4

1”

191

127

380

164

140

178

203

104

128

192

12.1

ULTRA 5S-150/5

1”

215

151

436

164

140

201

211

128

134

198

14.9

ULTRA 5S-180/6

1”

239

175

459

164

140

201

211

128

134

198

ULTRA 5S-200/7

1”

263

199

483

164

140

201

211

128

134

198

18.1

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

196

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Ultra Series 5S Pressure Systems

DAVIES ULTRA 5 PRESSURE SYSTEM – WITH HYDROGENIE 2 CONTROLLER Part No.

L/M (KPA)

Pump

230-UL0512-H2

5S-120/4

0.9

230-UL0515-H2

5S-150/5

1.1

230-UL0518-H2

5S-180/6

1.3

110

230-UL0520-H2

5S-200/7

1.5

120

104

350

450

Controller

Code

List Price

Hydrogenie 2

$1250.00

Hydrogenie 2

$1695.00

Hydrogenie 2

$1830.00

Hydrogenie 2

$2030.00

550

Supplied with: Prewired Hydrogenie 2 Auto controller. Connection union.

■ ■

DAVIES ULTRA 5 PRESSURE SYSTEM – WITH HYDROGENIE 3 CONTROLLER & PRESSURE TANK Part No.

L/M (KPA)

Pump

230-UL0512-H32

5S-120/4

0.9

230-UL0515-H32

5S-150/5

1.1

230-UL0518-H32

5S-180/6

1.3

110

230-UL0520-H32

5S-200/7

1.5

120

104

350

450

Controller

Code

Hydrogenie 3

$1375.00

Hydrogenie 3

$1830.00

Hydrogenie 3

$1960.00

Hydrogenie 3

$2165.00

550

List Price

Supplied with: Prewired Hydrogenie 3 Auto controller with pressure gauge. Connection union. Brass tee. 2.8Litre pressure tank.

■ ■ ■ ■

CONSTANT PRESSURE DAVIES ULTRA 5 PRESSURE SYSTEM – WITH HYDROGENIE 8 VFD & PRESSURE TANK L/M (KPA)

Part No.

Pump

230-UL0512-H808

5S-120/4T

0.9

230-UL0515-H808

5S-150/5T

1.1

230-UL0520-H808

5S-200/7T

1.5

120

104

350

450

Controller

Code

List Price

Hydrogenie 8

$2595.00

550

72 87

Hydrogenie 8

$2975.00

Hydrogenie 8

$3310.00

Supplied with: ■ Hydrogenie 8 Inverter speed controller (single phase supply). ■ Galv Base mounting stand. ■ 8 Litre pressure tank and connection hose. ■ Check valve and Ball valve. ■ Assembled and test run. Controller Features: ■ Run dry protection. ■ Energy saving variable speed technology. ■ Electrical fluctuation protection. ■ Digital display. See pump accessories section for more details. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

197

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Ultra Series 7S

DAVIES ULTRA 7S SERIES HP

Phase

Volts

Amps

Code

List Price

220-ULTRA 7S-180/4

1.8

1.3

230

8.3

$1360.00

220-ULTRA 7S-180/4T

1.8

1.3

230/400

5.5/3.2

$1360.00

220-ULTRA 7S-250/5

2.5

1.85

230

10.9

$1425.00

220-ULTRA 7S-250/5T

2.5

1.85

230/400

7.1/4.2

$1425.00

220-ULTRA 7S-300/6

3.0

2.2

230

12.2

$1620.00

220-ULTRA 7S-300/6T

3.0

2.2

230/400

8.5/5.0

$1620.00

220-ULTRA 7S-350/7T

3.5

2.57

230/400

8.7/5.1

$1800.00

Part No.

ULTRA 7S

Performance: 90 80

7S-350/7

7S-300/6

7S-250/5

50 HEAD (M)

7S-180/4

40 30 20 10 0 0

100

FLOW (LPM)

120

140

160

180

200

120

140

160

180

200

10 8 6 NPSHr (M) 4

2 0 100 FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model

ULTRA 7S-100/2

DNA

DNM

1 ¼”

1”

167

103

356

164

140

178

203

105

103

192

10.6

ULTRA 7S-120/3

1 ¼”

1”

167

103

356

164

140

178

203

105

192

11.6

ULTRA 7S-180/4

1 ¼”

1”

191

127

411

164

140

201

211

128

198

ULTRA 7S-250/5

1 ¼”

1”

215

151

436

164

140

201

211

128

198

ULTRA 7S-300/6

1 ¼”

1”

239

175

503

164

140

201

229

148

198

ULTRA 7S-350/7

1 ¼”

1”

263

199

527

164

140

201

229

148

203

20.7

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

198

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Ultra Series 7S Pressure Systems

DAVIES ULTRA 7 PRESSURE SYSTEM – WITH HYDROGENIE 4 CONTROLLER & PRESSURE TANK Part No.

Pump

230-UL0718-H42

7S-180/4

230-UL0725-H42

7S-250/5

L/M (KPA)

Controller

Code

List Price

Hydrogenie 4

$1910.00

Hydrogenie 4

$1975.00

250

350

450

1.3

158

125

1.8

170

150

Supplied with: ■ Prewired Hydrogenie 4 Auto controller. ■ Connection union. ■ Brass tee. ■ 2.8 Litre pressure tank. Controller Features: ■ Run dry and motor overload protection. ■ Auto restart following run dry. ■ Adjustable cut-in pressure: 1-5Bar.

DAVIES ULTRA 7 PRESSURE SYSTEM – WITH HYDROGENIE 5 CONTROLLER & PRESSURE TANK Kw

L/M (KPA)

Part No.

Pump

230-UL0718-H524T

7S-180/4T

1.3

230-UL0725-H424

7S-250/5

1.85

130

230-UL0725-H524T

7S-250/5T

1.85

130

Hydrogenie 5

450

550

650

Controller

Code

List Price

Hydrogenie 5

$2630.00

Hydrogenie 4

$2475.00

$2700.00

230-UL0730-H424

7S-300/6

2.2

142

120

Hydrogenie 4

$2670.00

230-UL0730-H524T

7S-300/6T

2.2

142

120

Hydrogenie 5

$2890.00

230-UL0735-H524T

7S-350/7T

3.0

150

130

110

Hydrogenie 5

$3150.00

Supplied with: Hydrogenie 4 (1Ph) or Hydrogenie 5 (3Ph) controller. Galv Base mounting stand. 24 Litre pressure tank and connection hose. Check valve and Ball valve. Assembled and test run

■ ■ ■ ■ ■

Controller Features: ■ Run dry and motor overload protection. ■ Auto restart following run dry. ■ Adjustable cut-in pressure: 1-5Bar.

DAVIES ULTRA 7 PRESSURE SYSTEM – WITH HYDROGENIE 8 VFD & PRESSURE TANK L/M (KPA)

Part No.

Pump

230-UL0718-H824T

7S-180/4T

1.3

450

550

650

Controller

Code

List Price

Hydrogenie 8

$3030.00

230-UL0725-H824T

7S-250/5T

1.85

130

Hydrogenie 8

$3095.00

230-UL0730-H824T

7S-300/6T

2.2

142

120

Hydrogenie 8

$3285.00

230-UL0735-H824T

7S-350/7T

3.0

150

130

110

Hydrogenie 8

$3610.00

CONSTANT PRESSURE

Supplied with: Hydrogenie 8 controller (single phase supply). Galv Base mounting stand. 24 Litre pressure tank and connection hose. Check valve and Ball valve. Assembled and test run.

■ ■ ■ ■ ■

199

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Ultra Series 9S

DAVIES ULTRA 9S SERIES HP

Phase

Volts

Amps

Code

List Price

220-ULTRA 9S-150/3

1.5

1.1

230

6.8

$1195.00

220-ULTRA 9S-150/3T

1.5

1.1

230/400

4.1/2.8

$1195.00

220-ULTRA 9S-200/4

2.0

1.5

230

8.4

$1415.00

220-ULTRA 9S-200/4T

2.0

1.5

230/400

5.7/3.3

$1415.00

220-ULTRA 9S-250/5

2.5

1.85

230

10.8

$1760.00

220-ULTRA 9S-250/5T

2.5

1.85

230/400

7.1/4.3

$1760.00

Part No.

Performance:

ULTRA 9S

70 60 9S-250/5 50 9S-200/4

40 HEAD (M)

9S-150/3

30 20 10 0 0

100

120

140

160

180

200

220

240

260

120 140 FLOW (LPM)

160

180

200

220

240

260

FLOW (LPM)

4 3 2 NPSHr (M)

1 0

DIMENSIONS AND SPECIFICATIONS Model

ULTRA 9S-100/2

DNA

DNM

1 ½”

1 ¼”

186

118

375

164

140

178

203

105

192

10.8

ULTRA 9S-150/3

1 ½”

1 ¼”

186

118

375

164

140

201

211

128

198

14.2

ULTRA 9S-200/4

1 ½”

1 ¼”

216

148

436

164

140

201

211

128

198

16.8

ULTRA 9S-250/5

1 ½”

1 ¼”

246

178

464

164

140

201

211

128

198

17.7

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

200

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Ultra Series 9S Pressure Systems

DAVIES ULTRA 9 PRESSURE SYSTEM – WITH HYDROGENIE 4 CONTROLLER & PRESSURE TANK Part No.

Pump

230-UL0915-H42

9S-150/3

230-UL0920-H42 230-UL0925-H42

L/M (KPA) 250

350

1.1

155

9S-200/4

1.5

195

140

9S-250/5

1.85

220

185

Controller

Code

List Price

Hydrogenie 4

$1750.00

Hydrogenie 4

$1975.00

140

Hydrogenie 4

$2320.00

450

DAVIES ULTRA 9 PRESSURE SYSTEM – WITH HYDROGENIE 5 CONTROLLER & PRESSURE TANK Part No.

Pump

230-UL0915-H424

9S-150/3

230-UL0915-H524T

9S-150/3T

230-UL0920-H424 230-UL0920-H524T 230-UL0925-H424 230-UL0925-H524T

L/M (KPA)

Controller

Code

List Price

Hydrogenie 4

$2300.00

Hydrogenie 5

$2530.00

Hydrogenie 4

$2520.00

Hydrogenie 5

$2750.00

185

140

Hydrogenie 4

$2875.00

185

140

Hydrogenie 5

$3095.00

450

550

1.1

155

1.1

155

9S-200/4

1.5

195

140

9S-200/4T

1.5

195

140

9S-250/5

1.85

220

9S-250/5T

1.85

220

650

Supplied with: ■ Hydrogenie 4 (1Ph) or Hydrogenie 5 (3Ph) controller. ■ Galv Base mounting stand. ■ 24 Litre pressure tank and connection hose. ■ Check valve and Ball valve. ■ Assembled and test run. Controller Features: ■ Run dry and motor overload protection. ■ Auto restart following run dry. ■ Adjustable cut-in pressure: 1-5Bar.

DAVIES ULTRA 9 PRESSURE SYSTEM – WITH HYDROGENIE 8 VFD & PRESSURE TANK Part No.

Pump

L/M (KPA) 450

550

Controller

650

Code

List Price

230-UL0915-H818

9S-150/3T

1.1

155

Hydrogenie 8

$2895.00

230-UL0920-H818

9S-200/4T

1.5

195

140

Hydrogenie 8

$3150.00

230-UL0925-H818

9S-250/5T

1.85

220

185

140

Hydrogenie 8

$3550.00

Supplied with: Hydrogenie 8 controller (single phase supply). Galv Base mounting stand. 24 Litre pressure tank and connection hose. Check valve and Ball valve. Assembled and test run.

■ ■ ■ ■ ■

201

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Ultra Series 18S

DAVIES ULTRA 18S SERIES Model

Phase

Volts

Amps

Code

List Price

220-ULTRA 18S-180/2T

1.8

1.3

230/400

5.1/3.0

$1485.00

220-ULTRA 18S-250/3T

2.5

1.85

230/400

7.5/4.4

$1635.00

220-ULTRA 18S-400/4T

4.0

3.0

230/400

9.7/5.7

$2090.00

Performance:

ULTRA 18S

50 18S-400/4

18S-250/3

HEAD (M) 30

18S-180/2

0 0

120

160

200

240

280

320

360

400

440

480

120

160

200 240 280 FLOW (LPM)

320

360

400

440

480

FLOW (LPM)

6 4 NPSHr (M) 2

DIMENSIONS AND SPECIFICATIONS Model

ULTRA 18S-180/2

DNA

DNM

2”

1 ½”

201

141

432

164

140

201

211

128

198

ULTRA 18S-250/3

2”

1 ½”

238

141

432

164

140

201

211

128

198

15.8

ULTRA 18S-400/4

2”

1 ½”

276

178

514

164

140

201

229

148

103

203

22.6

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

202

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

DMI Series

DAVIES DMI SERIES – 316 STAINLESS STEEL HORIZONTAL MULTI-STAGE Part No.

Phase

Volts

Amps

Code

List Price

220-DMI 2-40

0.5

0.37

230

2.6

$870.00

220-DMI 2-50

0.6

0.5

230

3.3

$970.00

220-DMI 2-60

0.8

0.6

230

3.8

$1050.00

220-DMI 4-30

0.8

0.6

230

3.9

$865.00

220-DMI 4-40

1.0

0.75

230

4.4

$965.00

220-DMI 4-50

1.2

0.93

230

5.8

$1040.00

220-DMI 4-60

1.5

1.1

230

7.1

$1120.00

220-DMI 8-10

0.6

0.5

230

3.3

$875.00

220-DMI 8-15

1.2

0.93

230

5.3

$1005.00

220-DMI 8-20

1.5

1.1

230

6.8

$1050.00

220-DMI 8-20T

1.5

1.1

230/400

5.5/3.2

$1050.00

220-DMI 8-25T

1.5

230/400

6.5/3.8

$1115.00

220-DMI 8-30

1.5

230

9.1

$1405.00

220-DMI 8-30T

1.5

230/400

6.9/4.0

$1405.00

220-DMI 12-10

1.2

0.93

230

5.3

$915.00

220-DMI 12-15

1.5

1.1

230

7.5

$1025.00

220-DMI 12-15T

1.5

1.1

230/400

5.9/3.4

$1025.00

220-DMI 12-20

1.5

230

10.5

$1280.00

220-DMI 12-20T

1.5

230/400

7.4/4.3

$1280.00

220-DMI 12-25T

2.2

230/400

9.3/5.4

$1490.00

220-DMI 12-30T

3.0

230/400

11.7/7

$1725.00

316 Stainless Wet End

The Davies DMI series are an industrial multistage 316 stainless steel pump capable of handling demanding applications whether it be just clean water supply or industrial washing machines and fertilizer dosing systems the DMI series are built to last. The DMI wet end is built entirely of 316 stainless steel for hygienic applications and corrosion resistance. The mechanical seal is of high quality Silicon carbide with EPDM elastomers for long service life. Technical Features: Liquid temperature range: 0°C to +110°C. Maximum ambient temperature: +40°C. Maximum operating pressure: 10bar. Pump casing, suction inter connector, chamber and impellers: 316 stainless steel. Pump shaft: 316 stainless steel. Mechanical seal: Silicon carbide/Silicon carbide. O rings: EPDM.

n n n n n n n

Motor Features: n Totally enclosed, fan cooled. n IP54 enclosure. n Class F insulation. n 50Hz 220-240V 1 Phase. n 50 Hz 220-240V/380/415V. n 3 Phase version requires user supplied overload protection. n

Viton upgrade option available.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

203

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

DMI Series

DMI 2 Series

DMI 4 Series

DMI 2-60

DMI 4-60

DMI 4-50

DMI 2-50

DMI 4-40

DMI 2-40 35

HEAD (M) 30

DMI 4-30 25

FLOW (LPM)

100

110

120

130

100

110

120

130

160

180

200

220

240

260

160

180

200

220

240

260

FLOW (LPM)

NPSHr (M) 4

0 0

FLOW (LPM)

DMI 8 Series

DMI 12 Series

DMI 8-30

DMI 12-30

DMI 8-25

DMI 12-25

DMI 8-20

DMI 12-20

DMI 8-15

HEAD (M) 30

HEAD (M)

DMI 12-15

25 25

DMI 8-10

DMI 12-10

100

120

140

160

180

100

120

140

FLOW (LPM)

8 6

2 NPSHr (M)

FLOW (LPM)

NPSHr (M) 4

0 0

100

120

140

160

180

FLOW (LPM)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

100

120

140

FLOW (LPM)

204

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

DMI Series

DIMENSIONS AND SPECIFICATIONS Model No.

DMI 2-40

403

255

171

162

1”

204

118

243

3/8”

132

140

141

DMI 2-50

403

255

171

162

1”

204

118

243

3/8”

132

140

141

DMI 2-60

403

255

171

162

1”

204

118

243

3/8”

132

140

141

DMI 4-30

403

255

171

162

1¼”

204

118

243

3/8”

132

140

141

DMI 4-40

403

255

171

162

1¼”

204

118

243

3/8”

132

140

141

DMI 4-50

441

255

171

162

1¼”

204

118

243

3/8”

132

140

141

DMI 4-60

441

255

171

162

1¼”

204

118

243

3/8”

132

140

141

DMI 8-10

403

255

181

162

1½”

204

118

243

3/8”

132

142

141

DMI 8-15

441

255

181

162

1½”

204

118

243

3/8”

132

142

141

DMI 8-20

441

255

181

162

1½”

204

118

243

3/8”

132

142

141

DMI 8-25

514

267

200

235

1½”

204

121

245

3/8”

178

142

177

DMI 8-25T

441

233

181

162

1½”

204

118

243

3/8”

132

142

141

DMI 8-30

514

267

200

235

1½”

204

121

243

3/8”

178

142

177

DMI 8-30T

493

261

200

235

1½”

204

121

243

3/8”

132

142

141

DMI 12-10

441

255

181

162

1½”

204

118

243

3/8”

132

142

141

DMI 12-15

441

255

181

162

1½”

204

118

243

3/8”

132

142

141

DMI 12-15T

441

233

181

162

1½”

204

118

243

3/8”

132

142

141

DMI 12-20

514

267

200

235

1½”

204

121

243

3/8”

178

142

141

DMI 12-20T

493

261

200

235

1½”

204

121

243

3/8”

178

142

177

DMI 12-25

514

267

200

235

1½”

204

121

243

3/8”

178

142

177

DMI 12-25T

493

261

200

235

1½”

204

121

243

3/8”

178

142

177

DMI 12-30T

539

284

230

245

1½”

204

133

259

3/8”

198

142

197

F E

B C

K M

L Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

205

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI Series Multistage

MVI SERIES STAINLESS STEEL VERTICAL MULTISTAGE PUMPS When reliability and efficiency is not an option the MVI series vertical multistage tops the list - all stainless steel wet end components, Silicon Carbide cartridge seals and Tungsten carbide shaft bearings ensure you have a pump that can be relied on. Features: ■ 304 Stainless steel impellers and Diffusers. ■ Long Life silicon carbide cartridge seal. ■ EPDM outer casing O Rings. ■ DIN flange connections. ■ B14 or B5 IEC motor flange connection. Typical Applications: ■ Water supply from storage tanks. ■ Pressure boosting in High rise buildings. ■ Water treatment plants. ■ Steam Boiler feed. ■ Industrial Circulation. ■ Car Washing facilities. ■ Fire fighting systems. ■ Greenhouses, Sprinkler irrigation. ■ Boilers. ■ Refridgerators. Pump Type ■ Vertical non self-priming multistage centrifugal pump for pumping clean, thin (viscosity no higher than of water), non-explosive, non-flammable, free of solid particles, sand and fibers. Motor Features: ■ Totally enclosed, fan cooled standard PSC type Single phase motor or Three phase motor. ■ Rated speed: 2850 RPM - 50Hz. ■ Single phase voltage range: 220-240V. ■ Three phase voltage range: 220-240/380-415. ■ Insulation: Class F. ■ Protection: IP54 or IP55(depending on manufacturer). ■ Single phase versions are fitted with manual reset overload. ■ Three phase version require user supplied overload to be fitted in the installation to protect the motor. Operation limitations: ■ Maximum ambient temperature: +40ºC . ■ Liquid temperature range: -15ºC to + 120ºC.

MAXIMUM OPERATING AND INLET PRESSURES Model No.

Maximum operating pressure

Maximum inlet pressure

MVI 1 series – All models

25Bar

10Bar

MVI 3 series – 11-29 stages – 36 stages

25Bar 25Bar

10Bar 15Bar

MVI 4 series – All models

25Bar

10Bar

MVI 5 series – 8-15 stage – 18-29 stages

25Bar 25Bar

10Bar 15Bar

MVI 10 series – All models

16Bar

8Bar

MVI 15 series – All models

16Bar

8Bar

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

206

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI Series Multistage

QUICK SELECTION PERFORMANCE TABLE Model

MVI 1-15

L/M M3/H

0.75

0 0

16 1

33 2

MVI 1-19

1.1

112

108

MVI 1-23

1.1

138

129

MVI 1-30

1.5

181

172

122

MVI 1-36

2.2

218

210

150

50 3

66 4

MVI 3-11

1.1

MVI 3-15

1.1

MVI 3-19

1.5

122

119

108

MVI 3-25

2.2

160

157

145

120

MVI 3-29

2.2

190

182

165

132

MVI 3-36

3.0

238

228

209

175

122

83 5

100 6

116 7

MVI 4-06

1.1

MVI 4-08

1.5

MVI 4-10

2.2

100

MVI 4-12

2.2

120

110

103

MVI 4-16

3.0

161

148

140

129

115

100

MVI 5-08

1.1

133 8

150 9

166 10

200 12

233 14

266 16

300 18

333 20

366 22

400 24

433 26

MVI 5-10

1.5

MVI 5-12

2.2

MVI 5-15

2.2

MVI 5-18

3.0

120

112

106

MVI 5-22

4.0

148

139

130

120

110

MVI 5-29

4.0

195

185

175

162

148

128

105

MVI 10-06

2.2

MVI 10-08

3.0

MVI 10-12

4.0

120

118

114

109

102

MVI 10-16

5.5

161

160

156

151

145

138

128

105

MVI 15-4

4.0

MVI 15-6

5.5

MVI 15-9

7.5

122

118

117

114

108

102

MVI 15-12

11.0

166

160

158

153

147

139

128

116

104

COMPONENT DETAILS Serial No.

Item

Material

Pump Head Bracket

Cast Iron

Motor to Pump coupling

Alloy Fe-Cu-C

Pump Shaft

AISI 304 Stainless steel

Mechanical seal

SQQE -Cartridge type, Silicon carbide, EPDM

Pump Head cover

AISI 304 Stainless steel

Impeller

AISI 304 Stainless steel

Chamber

AISI 304 Stainless steel

Outer pump casing

AISI 304 Stainless steel

O Ring

EPDM

Neck Ring

PTFE

Suction/Delivery housing

AISI 304 Stainless steel

Base Plate

Cast Iron

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

207

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI 1 Series Multistage

No Motor

DAVIES MVI 1 WET END ONLY Part No.

Motor Frame/Flange

Code

List Price

220-MVI 1-15

1.0

0.75

80/B14

$1525.00

220-MVI 1-19

1.5

1.1

80/B14

$1720.00

220-MVI 1-23

1.5

1.1

80/B14

$1995.00

220-MVI 1-30

2.0

1.5

90/B14

$2250.00

220-MVI 1-36

3.0

2.2

90/B14

$2500.00

1m3/h

Price includes DIN32 Companion Flange set. 1Ph Motor

DAVIES MVI 1 WITH 230V SINGLE PHASE MOTOR Part No.

Phase

Amps

Code

List Price

220-MVI 1-15M

1.0

0.75

5.0

$2020.00

220-MVI 1-19M

1.5

1.1

8.0

$2225.00

220-MVI 1-23M

1.5

1.1

8.0

$2420.00

220-MVI 1-30M

2.0

1.5

9.5

$3050.00

220-MVI 1-36M

3.0

2.2

13.4

$3400.00

Price includes DIN32 Companion Flange set. 3Ph Motor

DAVIES MVI 1 WITH THREE PHASE MOTOR Amps Part No.

Phase

230v Star

400v Delta

Code

List Price

220-MVI 1-15T

1.0

0.75

2.6

1.5

$2020.00

220-MVI 1-19T

1.5

1.1

3.9

2.2

$2225.00

220-MVI 1-23T

1.5

1.1

3.9

2.2

$2420.00

220-MVI 1-30T

2.0

1.5

5.1

2.9

$3050.00

220-MVI 1-36T

3.0

2.2

7.5

4.3

$3400.00

Price includes DIN32 Companion Flange set.

DIMENSIONS AND SPECIFICATIONS (INCLUDING 3 PHASE MOTOR) Motor P2 (Kw)

MVI 1-15

Model No.

0.75

504

764

160

155

28.0

MVI 1-19

1.1

576

836

160

155

32.0

MVI 1-23

1.1

648

908

160

155

34.0

MVI 1-30

1.5

790

1095

175

165

42.9

MVI 1-36

2.2

898

1233

175

165

47.2

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

208

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI 1 Series Multistage

MVI 1

240 220

1-36

200 180

1-30

160 140

1-23

HEAD (M) 120

1-19

100

1-15

80 60 40 20 0 0

FLOW (LPM)

4 3 2 NPSHr (M)

1 0 0

20 25 FLOW (LPM)

50 40 Eﬀ(%)

30 20 10 0

Kw(P2) /Stage

0.06 0.05 0.04 0.03 0.02 0.01 0

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

209

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI 3 Series Multistage

No Motor

DAVIES MVI 3 WET END ONLY Part No.

Motor Frame/Flange

Code

List Price

220-MVI 3-11

1.5

1.1

80/B14

$1340.00

220-MVI 3-15

1.5

1.1

80/B14

$1630.00

220-MVI 3-19

2.0

1.5

90/B14

$1715.00

220-MVI 3-25

3.0

2.2

90/B14

$2130.00

220-MVI 3-29

3.0

2.2

80/B14

$2575.00

3m3/h

Price includes DIN32 Companion Flange set. 1Ph Motor

DAVIES MVI 3 WITH SINGLE PHASE MOTOR Part No.

Phase

Amps

Code

List Price

220-MVI 3-11M

1.5

1.1

8.0

$1865.00

220-MVI 3-15M

1.5

1.1

8.0

$2060.00

220-MVI 3-19M

2.0

1.5

9.5

$2560.00

220-MVI 3-25M

3.0

2.2

13.4

$2950.00

220-MVI 3-29M

3.0

2.2

13.4

$3080.00

Price includes DIN32 Companion Flange set. 3Ph Motor

DAVIES MVI 3 WITH THREE PHASE MOTOR Amps Part No.

Phase

230v Star

400v Delta

Code

List Price

220-MVI 3-11T

1.5

1.1

3.9

2.2

$1865.00

220-MVI 3-15T

1.5

1.1

3.9

2.2

$2000.00

220-MVI 3-19T

2.0

1.5

5.1

2.9

$2560.00

220-MVI 3-25T

3.0

2.2

7.5

4.3

$2950.00

220-MVI 3-29T

3.0

2.2

7.5

4.3

$3080.00

Price includes DIN32 Companion Flange set.

DIMENSIONS AND SPECIFICATIONS (INCLUDING 3 PHASE MOTOR) Model No.

MVI 3-11

Motor P2 (Kw)

1.1

429

660

160

155

27.0

MVI 3-15

1.1

501

732

160

155

29.0

MVI 3-19

1.5

589

864

175

165

38.8

MVI 3-25

2.2

697

972

175

165

43.1

MVI 3-29

2.2

769

1044

175

165

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

210

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI 3 Series Multistage

MVI 3 200 180

3-29

160 3-25

140 120

3-19

HEAD (M) 100

3-15

3-11

40 20 0

40 FLOW (LPM)

FLOW (LPM)

4 3 NPSHr (M)

2 1 0

70 60 50 40 Eff(%) 30 20 10 0

Kw(P2) /Stage

0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0

FLOW (LPM)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

211

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI 4 Series Multistage

No Motor

DAVIES MVI 4 WET END ONLY Part No.

Motor Frame/Flange

Code

List Price

220-MVI 4-06

1.5

1.1

80/B14

$1250.00

220-MVI 4-08

2.0

1.5

90/B14

$1310.00

220-MVI 4-10

3.0

2.2

90/B14

$1430.00

220-MVI 4-12

3.0

2.2

90/B14

$1540.00

220-MVI 4-16

4.0

3.0

100/B14

$1715.00

4m3/h

Price includes DIN32 Companion Flange set. 1Ph Motor

DAVIES MVI 4 WITH SINGLE PHASE MOTOR Part No.

Phase

Amps

Code

List Price

220-MVI 4-06M

1.5

1.1

8.0

$1780.00

220-MVI 4-08M

2.0

1.5

9.5

$2030.00

220-MVI 4-10M

3.0

2.2

13.4

$2230.00

220-MVI 4-12M

3.0

2.2

13.4

$2325.00

Price includes DIN32 Companion Flange set. 3Ph Motor

DAVIES MVI 4 WITH THREE PHASE MOTOR Amps Part No.

Phase

230v Star

400v Delta

Code

List Price

220-MVI 4-06T

1.5

1.1

3.9

2.2

$1780.00

220-MVI 4-08T

2.0

1.5

5.1

2.9

$2030.00

220-MVI 4-10T

3.0

2.2

7.5

4.3

$2230.00

220-MVI 4-12T

3.0

2.2

7.5

4.3

$2325.00

220-MVI 4-16T

4.0

3.0

9.9

5.7

$2560.00

Price includes DIN32 Companion Flange set.

DIMENSIONS AND SPECIFICATIONS (INCLUDING 3 PHASE MOTOR) Model No.

Motor P2 (Kw)

MVI 4-06

1.1

393

628

141

115

25.0

MVI 4-08

1.5

463

754

177

141

27.0

MVI 4-10

2.2

517

808

177

141

29.0

MVI 4-12

2.2

571

862

177

141

38.8

MVI 4-16

3.0

684

1000

197

147

43.1

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

212

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI 4 Series Multistage

MVI 4 180 160 4-16 140 120 4-12 100 4-10

HEAD (M)

80 4-08 60

4-06

40 20 0 0

100

110

120

130

140

150

70 80 FLOW (LPM)

100

110

120

130

140

150

70 80 90 FLOW (LPM)

100

110

120

130

140

150

70 80 90 FLOW (LPM)

100

110

120

130

140

150

FLOW (LPM)

3 2 NPSHr (M)

1 0

60 50 40 Eﬀ(%) 30 20 10 0

0.2 0.15 Kw(P2) /Stage

0.1 0.05 0

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

213

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI 5 Series Multistage No Motor

DAVIES MVI 5 WET END ONLY Part No.

Motor Frame/Flange

Code

List Price

220-MVI 5-8

1.5

1.1

80/B14

$1380.00

220-MVI 5-10

2.0

1.5

90/B14

$1475.00

220-MVI 5-12

3.0

2.2

90/B14

$1585.00

220-MVI 5-15

3.0

2.2

90/B14

$1725.00

220-MVI 5-18

4.0

3.0

100/B14

$1960.00

220-MVI 5-22

5.5

4.0

112/B14

$2175.00

220-MVI 5-29

5.5

4.0

112/B14

$2450.00

5m3/h

Price includes DIN32 Companion Flange set. 1Ph Motor DAVIES MVI 5 WITH SINGLE PHASE MOTOR Part No.

Phase

Amps

Code

List Price

220-MVI 5-8M

1.5

1.1

8.0

$1875.00

220-MVI 5-10M

2.0

1.5

9.5

$2290.00

220-MVI 5-12M

3.0

2.2

13.4

$2490.00

220-MVI 5-15M

3.0

2.2

13.4

$2650.00

Price includes DIN32 Companion Flange set. 3Ph Motor DAVIES MVI 5 WITH THREE PHASE MOTOR Amps Part No.

Phase

230v Star

400v Delta

Code

List Price

220-MVI 5-8T

1.5

1.1

3.9

2.2

$875.00

220-MVI 5-10T

2.0

1.5

5.1

2.9

$2290.00

220-MVI 5-12T

3.0

2.2

7.5

4.3

$2490.00

220-MVI 5-15T

3.0

2.2

7.5

4.3

$2650.00

220-MVI 5-18T

4.0

3.0

9.9

5.7

$2950.00

220-MVI 5-22T

5.5

4.0

7.1

$3325.00

220-MVI 5-29T

5.5

4.0

7.1

$3600.00

Price includes DIN32 Companion Flange set. DIMENSIONS AND SPECIFICATIONS (INCLUDING 3 PHASE MOTOR) Model No.

Motor P2 (Kw)

MVI 5-8

1.1

450

681

160

155

29.0

MVI 5-10

1.5

520

795

175

155

37.1

MVI 5-12

2.2

574

849

175

165

40.2

MVI 5-15

2.2

655

930

175

165

41.9

MVI 5-18

3.0

740

1060

200

170

51.1

MVI 5-22

4.0

848

1183

220

188

60.4

MVI 5-29

4.0

1037

1372

220

162

64.0

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

214

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI 5 Series Multistage

MVI 5 220 200 5-29

180 160 140

5-22

120 HEAD (M)

5-18

100

5-15

5-12

5-10 5-8

40 20 0 0

100

110

120

130

140

150

70 80 FLOW (LPM)

100

110

120

130

140

150

70 80 FLOW (LPM)

100

110

120

130

140

150

70 80 FLOW (LPM)

100

110

120

130

140

150

FLOW (LPM)

4 3 NPSHr (M)

2 1 0

Eﬀ(%)

Kw(P2) /Stage

70 60 50 40 30 20 10 0

0.16 0.14 0.12 0.1 0.08 0.06 0.04 0.02 0

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

215

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI 10 Series Multistage

No Motor

DAVIES MVI 10 WET END ONLY Part No.

Motor Frame/Flange

Code

List Price

220-MVI 10-6

3.0

2.2

90/B14

$2250.00

220-MVI 10-8

4.0

3.0

100/B14

$2460.00

220-MVI 10-10

5.5

4.0

112/B14

$2685.00

220-MVI 10-12

5.5

4.0

112/B14

$2925.00

220-MVI 10-14

7.5

5.5

132/B5

$3100.00

220-MVI 10-16

7.5

5.5

132/B5

$3250.00

10m3/h

Price includes DIN40 Companion Flange set. 1Ph Motor

DAVIES MVI 10 WITH SINGLE PHASE MOTOR Part No.

Phase

Amps

Code

List Price

220-MVI 10-6M

3.0

2.2

13.4

$2975.00

Price includes DIN40 Companion Flange set. 3Ph Motor

DAVIES MVI 10 WITH THREE PHASE MOTOR Amps Part No.

Phase

230v Star

400v Delta

Code

List Price

220-MVI 10-6T

3.0

2.2

7.5

4.3

$2975.00

220-MVI 10-8T

4.0

3.0

9.9

5.7

$3075.00

220-MVI 10-10T

5.5

4.0

7.1

$3580.00

220-MVI 10-12T

5.5

4.0

7.1

$3825.00

220-MVI 10-14T

7.5

5.5

9.9

$4200.00

220-MVI 10-16T

7.5

5.5

9.9

$4350.00

Price includes DIN40 Companion Flange set.

DIMENSIONS AND SPECIFICATIONS (INCLUDING 3 PHASE MOTOR) Model No.

Motor P2 (Kw)

MVI 10-6

2.2

483

758

175

165

51.1

MVI 10-8

3.0

548

868

200

175

60.0

MVI 10-10

4.0

608

943

220

188

70.0

MVI 10-12

4.0

668

1003

220

188

71.0

MVI 10-14

5.5

760

1120

275

213

300

96.4

MVI 10-16

5.5

820

1180

275

213

300

98.5

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

216

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI 10 Series Multistage

MVI 10 180 160

MVI 10

10-16

180 140

10-14

160

10-16

120

140

10-12

10-14

100 120

10-10 10-12

HEAD (M)

100 80

10-8

HEAD (M)

80 60

10-8

10-6

40 20

20 0

0 0 0

100

FLOW (LPM) 100 120

120

140

160

180

200

220

240

100 120 140 FLOW (LPM)

160

180

200

220

240

100

160

180

200

220

240

100

160

180

200

220

240

FLOW (LPM)

160

180

200

220

240

5 4 NPSHr (M)

3 2 1 0

Eﬀ(%)

70 60 50 40 30 20 10 0

0.4

120 140 FLOW (LPM)

0.3 Kw(P2) /Stage

0.2 0.1 0

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

120 140 FLOW (LPM)

217

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI 15 Series Multistage

No Motor

DAVIES MVI 15 WET END ONLY Part No.

Motor Frame/Flange

Code

List Price

220-MVI 15-4

5.5

4.0

112/B14

$2250.00

220-MVI 15-6

7.5

5.5

132/B5

$2550.00

220-MVI 15-7

7.5

5.5

132/B5

$2750.00

220-MVI 15-9

10.0

7.5

132/B5

$3050.00

15m3/h

Price includes DIN50 Companion Flange set. 3Ph Motor

DAVIES MVI 15 WITH THREE PHASE MOTOR Part No.

220-MVI 15-4T

Phase

Amps 400v

Code

List Price

5.5

4.0

7.1

$3400.00

220-MVI 15-6T

7.5

5.5

9.9

$4350.00

220-MVI 15-7T

7.5

5.5

9.9

$4550.00

220-MVI 15-9T

10.0

7.5

13.3

$5100.00

Price includes DIN50 Companion Flange set.

DIMENSIONS AND SPECIFICATIONS (INCLUDING 3 PHASE MOTOR) Model No.

Motor P2 (Kw)

MVI 15-4

4.0

MVI 15-6

5.5

508

913

220

188

65.4

630

1060

275

213

300

91.6

MVI 15-7

7.5

765

1206

275

213

300

103.8

MVI 15-9

11.0

977

1482

314

260

300

183.7

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

218

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI 15 Series Multistage

MVI 15 180 160 140 120

15-9

100 15-7

HEAD (M)

15-6

60 15-4

40 20 0 0

120

160

200

240

280

320

360

400

440

120

160

200 240 FLOW (LPM)

280

320

360

400

440

120

160

200 240 FLOW (LPM)

280

320

360

400

440

120

160

200 240 FLOW (LPM)

280

320

360

400

440

FLOW (LPM)

5 4 NPSHr (M)

3 2 1 0

Eﬀ(%)

Kw(P2) /Stage

80 70 60 50 40 30 20 10 0

0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

219

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI Series Multistage Service Motors

DAVIES MVI 230V SINGLE PHASE PSC MOTORS Part No.

Phase

Volts

Amps

Motor Frame

Flange

Code

List Price

220-DSVM0100

1.0

0.75

230

4.6

80A

B14

$510.00

220-DSVM0150

1.5

1.1

230

7.5

80B

B14

$525.00

220-DSVM0200

2.0

1.5

230

9.3

90S

B14

$850.00

220-DSVM0300

3.0

2.2

230

90L

B14

$950.00

DAVIES MVI 400V THREE PHASE MOTORS Part No.

Phase

Volts

Amps

Motor Frame

Flange

Code

List Price

220-DTVM0100

1.0

0.75

230/400

3.4/2

80A

B14

$510.00

220-DTVM0150

1.5

1.1

230/400

4.8/2.8

80B

B14

$525.00

220-DTVM0200

2.0

1.5

230/400

6/3.5

90S

B14

$850.00

220-DTVM0300

3.0

2.2

230/400

8.2/4.8

90L

B14

$950.00

220-DTVM0400

4.0

3.0

230/400

11/6.5

100L

B14

$1050.00

220-DTVM0550

5.5

4.0

230/400

15/8.8

112M

B14

$1350.00

220-DTVM0750

7.5

5.5

230/400

10.4

132S

$1450.00

220-DTVM1000

10.0

7.5

230/400

14.4

132S

$2050.00

DAVIES MVI SERVICE MOTOR WITH VARIABLE SPEED DRIVE 230V Part No.

Phase

Volts

Amps 230V

VFD

Flange

Code

List Price

220-DTVM0100-HG15

1.0

0.75

230

3.4

HG15

B14

$1475.00

220-DTVM0150-HG15

1.5

1.1

230

4.8

HG15

B14

$1490.00

220-DTVM0200-HG15

2.0

1.5

230

HG15

B14

$1815.00

220-DTVM0300-HG15

3.0

2.2

230

8.2

HG15

B14

$1915.00

DAVIES MVI SERVICE MOTOR WITH VARIABLE SPEED DRIVE 400V Part No.

Phase

Volts

Amps 400V

VFD

Flange

Code

List Price

220-DTVM0100-HG16

1.0

0.75

400

HG16

B14

$1695.00

220-DTVM0150-HG16

1.5

1.1

400

2.8

HG16

B14

$1710.00

220-DTVM0200-HG16

2.0

1.5

400

3.5

HG16

B14

$2035.00

220-DTVM0300-HG16

3.0

2.2

400

4.8

HG16

B14

$2135.00

220-DTVM0400-HG17

4.0

3.0

400

6.5

HG17

B14

$2335.00

220-DTVM0550-HG17

5.5

4.0

400

8.8

HG17

B14

$2635.00

n n

VFD mounted to motor Supplied with Transducer

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

220

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MVI Series Multistage Pressure Systems

The Davies MVI Series pumps are available in a wide range of performances from 1 - 150m3/hour and over 300m pressure. Please contact Argon for details and availability.

MVI

MVI150

MVI3

MVI1

MVI10

MVI5

MVI45

MVI20

MVI15

MVI32

MVI90

MVI64

MVI120

Davies MVI pump sets are available to suit a wide range of applications from simple single pump pressure sets to multiple pump variable speed-controlled systems. Please contact Argon for details and availability. n n n n

MVI pump sets. We can build pump sets to suit your application. Contact Argon for pricing VFD systems Pressure switch systems Save time & set up

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

221

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Peripheral Turbine Pumps

DAVIES PL SERIES TURBINE PUMP Part No.

Phase

Volts

Amps

Code

List Price

220-PL51M

0.5

0.37

230

2.5

$325.00

220-PL50T

0.5

0.37

400

1.0

$325.00

Features: Side inlet. Cast iron pump body housing. Brass impeller.

n n n

Performance: 40 35 B

DNM

DNA

30 25

PL50

H2 H

HEAD (M) 20

15 10 B

DNM

DNA

5 0

DIMENSIONS AND SPECIFICATIONS Model

PL50

H2 H

FLOW (LPM)

DNA

DNM

230

165

117

149

1”

6.5

DAVIES OD SERIES TURBINE PUMP Part No.

220-OD51M 220-OD100M 220-OD100T 220-PM100

Phase

Volts

Amps

Code

List Price

0.5 1.0 1.0 1.0

0.37 0.74 0.74 0.74

1 1 3 1

230 230 400 230

2.5 5.4 2.4 5.6

D D D D

$350.00 $475.00 $475.00 $540.00

Features: Centre inlet. Cast iron pump body housing. Brass impeller.

n n n

Performance: 100 A

B DNM

80 DNA

PM100

60 HEAD (M)

OD50

DNM

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS OD50 OD100 PM100

DNA

Model

OD100

DNA

DNM

256 294 286

50 55 50

156 172 172

63 71 71

145 157 158

1” 1” 1”

6.1 11 10.5

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

222

F G

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Peripheral Turbine Pumps

ARETA ODS SERIES TURBINE PUMP –304 STAINLESS STEEL Part No.

220-ODS20

Phase

Volts

Amps

Code

List Price

0.25

0.2

230

2.0

$320.00

Features: n Centre inlet. n 304 Stainless steel pump body housing and impeller. Performance: 35 30

25 20 HEAD (M)

ODS20 15 10

5 0

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model

DNA

DNM

ODS20

140

245

160

145

1”

6.5

DAVIES PM SERIES TURBINE PUMP Part No.

220-PM45BR

Phase

Volts

Amps

Code

List Price

0.37

0.5

230

2.3

$590.00

Features: n Centre inlet. n Brass impeller and pump body. Performance: 40 35 30 25 HEAD (M)

PM45BR 15 10 5 0

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model

PM45BR

DNA

DNM

260

153

143

1”G

5.7

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

223

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

K51-K400 Series

DAVIES K51-301 SERIES Part No.

Phase

Volts

Amps

Code

List price

220-K51M 220-K51T 220-K82M 220-K102M

0.5 0.5 0.8 1.0

0.37 0.37 0.6 0.75

1 3 1 1

230 400 230 230

2.6 1.1 4.8 5.8

D D D D

$400.00 $400.00 $505.00 $560.00

220-K101T 220-K151M 220-K151T 220-K200M 220-K200T 220-K300M 220-K300T 220-K400T

1.0 1.5 1.5 2.0 2.0 3.0 3.0 4.0

0.75 1.1 1.1 1.47 1.47 2.2 2.2 3.0

3 1 3 1 3 1 3 3

400 230 400 230 400 230 400 400

2.2 9.0 3.5 12.0 4.8 13.6 5.1 7.8

D D D D D D D D

$560.00 $985.00 $985.00 $1100.00 $1100.00 $1375.00 $1150.00 $1665.00

The K51-401 series pumps are designed to pump clean water without abrasives and suspended solids. Simple design for long term reliability and serviceability. Pump Features: Cast iron pump body. Pump/motor bracket- Die-cast aluminium for K51-K101 models and cast iron for K151-K401. Stamped brass impeller. 304 stainless steel pump shaft (420 s/s for K51-101 models). Carbon ceramic mechanical seal.

n n n n n

Motor Features: n Closed auto-ventilated motor with protection IPX4, two poles, class F insulation. n Single-phase with incorporated motor protector and capacitor permanently connected. n Three-phase with compulsory protection to be provided by the user. n Continuous duty. A

K Series

Performance Data:

DNM

55 50

DNA

45 40 H

HEAD (M)

K400

K300

K200

K151

K81

K101

DNM

K300

ØM

K151

K51

K101

DNA

K200

100

120

140

160

180

200

220

240

FLOW (LPM)

ØM

F G

DIMENSIONS AND SPECIFICATIONS Model

K51 K81 K101 K151 K200 K300 K400

DNA

265 283 283 344 373 373 442

45 45 45 47 52 52 57

206 237 237 262 294 294 340

103 105 105 107 30 30 93

124 140 140 149 160 160 200

164 180 180 199 223 223 250

9 9 9 11 11 11 14

85 97 97 110 118 118 150

1” 1” 1” 1”¼ 1”¼ 1”¼ 1”½

1” 1” 1” 1” 1” 1” 1”¼

8.5 12.5 14.0 20.5 26.2 25.5 44.5

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

224

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

KA Series 1½”

DAVIES KA SERIES – SINGLE IMPELLER Part No.

Phase

Volts

Amps

Code

List Price

220-KA80M

0.8

0.59

230

4.2

$585.00

220-KA101M

1.0

0.74

230

5.5

$605.00

220-KA150M

1.5

1.1

230

$975.00

220-KA150T

1.5

1.1

230/400

6/3.5

$975.00

220-KA200M

2.0

1.5

230

11.5

$1030.00

220-KA200T

2.0

1.5

230/400

7.2/4.2

$1030.00

Open Impeller

KA series with open impeller are for those applications where a small amount of foreign objects are present in the liquid that would normally clog a closed impeller. n Good for high flow low head applications. n Maximum ambient temperature: 40°C. n Maximum liquid temperature: KA80/100 +45°C , KA150/200 +90°C. Technical Features: n Pump body: G20 Cast Iron. n Impeller: KA80/100 – Techno-polymer, KA150/200 – G20 Cast Iron . n Pump shaft: Stainless steel Aisi 420A. n Mechanical seal: Carbon/ceramic. Motor Features: n Closed auto-ventilated motor with protection IP44, class F insulation. n Single-Phase with incorporated motor protector and capacitor permanently connected. n Three phase motor protection is compulsory and is to be provided by the user. n Continuous duty. Performance:

KA Series A

24 B DNM

DNA

KA200

15 KA150

KA101 HEAD (M)

C H

KA200

KA80

KA150

KA100

ØM F

KA80

A B DNM

DNA

100

150

200

250

300

350

400

450

500

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model No.

DNA

DNM

288

237

114

140

180

1½”

1 ½”

KA100

288

237

114

180

1 ½”

KA150

349

260

149

199

110

1 ½”

KA200

349

260

136

149

199

110

1 ½”

KA80

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

225

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ØM F G

SURFACE PUMPS

KC Series 1½”

DAVIES KC SERIES Part No.

Phase

Volts

Amps

Code

List Price

220-KC 150M

1.5

1.1

230

8.5

$1045.00

220-KC 150T

1.5

1.1

400

3.7

$1045.00

220-KC 200M

1.47

230

11.6

$1145.00

220-KC 200T

1.47

400

4.7

$1145.00

220-KC 300T

2.2

400

5.2

$1410.00

n n

Single Impeller n Excellent Wash-Down Pump Max pumped liquid temperature: 90°C n Max ambient temperature: 40°C

Technical Features: n Pump body: Cast iron G20 with anti-corrosive coating. n Motor bracket: Cast iron G20 with anti-corrosive coatings. n Impeller: Stamped brass UNI-EN 12165. n Pump shaft: Stainless steel Aisi 420A. n Mechanical seal: Carbon-ceramics. Motor Features: n Closed auto-ventilated motor with protection IPX4, two poles, class F insulation. n Single-phase with incorporated motor protector and capacitor permanently connected. n Three-phase the compulsory protection to be provided by the user. n Continuous duty. Performance:

KC Series

KC300 KC200

KC150 HEAD (M)

DNM

KC300 KC200 DNA

KC150

ØM

MODELS

KC 150 KC 200 200KC 300

100

150

33 33 250 33

54 54 300 54

E D

B [mm]DNM DIMENSIONS E F ∅M

370 223 382 223 382 350 223

160 160 400 160

230 230 DNA 230

FLOW (LPM)

11 11 11

118 118 118

292 292 292

1"1/2 1"1/2 1"1/2

H1 ØM

DIMENSION AND SPECIFICATIONS Model

ØM

DNA

KC150

370

223

160

230

118

292

1½”

KC200

382

223

160

230

118

292

1½”

1½” 24.5 MODELS 1½” 25.4

KC300

382

223

160

230

118

292

1½”

1½” KC 20026.4

KC 150

KC 300

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

DNA

1"1/2 1"1/2 1"1/2

226

E D

33 33 33

54 54 54

370 382 382

223 223 223

DIMENSIONS [mm] E F ∅M

160 160 160

230 230 230

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

11 11 11

SURFACE PUMPS

KD Series

DAVIES KD SERIES Part No.

220-KD300M n n

Phase

Volts

Amps

Code

List Price

3.0

2.2

230

$1415.00

Single Impeller n Excellent Wash-Down Pump Max pumped liquid temperature: 90°C n Max ambient temperature: 40°C

Single Phase Washdown Pump

KD Series

Performance: 36

DNM

KD300 18

DNA

HEAD (M)

KD300M

12 Ø

F G

6 A

DNM

100

200

300

400

500

600 DNA

FLOW (LPM)

DIMENSION AND SPECIFICATIONS Model

KD300M

DNA

DNM

365

295

149

190

240

125

2”

31.5

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

227

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

KP Series 2”

DAVIES KP SERIES Part No.

Phase

Volts

Amps

Code

List Price

220-KP80M

0.8

0.59

230

4.5

$605.00

220-KP100M

1.0

0.74

230

5.4

$640.00

220-KP121M

1.2

0.90

230

6.0

$680.00

220-KP121T

1.2

0.90

400

2.3

$680.00

KP series highflow centrifugal pump with high clearance closed impeller. n Good for high flow low head applications. n Maximum ambient temperature: 40°C. n Maximum liquid temperature: 45°C. n Maximum pressure inside pump casing: 6bar. Technical Features: n Pump body: G20 Cast Iron. n Impeller: Techno-polymer. n Pump shaft: Stainless steel Aisi 420A. n Mechanical seal: Carbon/ceramic. Motor Features: n Closed auto-ventilated motor with protection IP44, class F insulation. n Single-Phase with incorporated motor protector and capacitor permanently connected. n Three phase motor protection is compulsory and is to be provided by the user. n Continuous duty.

KP80-120 Series

Performance: 16

12 B DNM

KP121 DNA

HEAD (M)

KP100

C H

KP80

ØM

2 B DNM

100

200

300

400

500

FLOW (LPM)

DNA

DIMENSION AND SPECIFICATIONS Model

DNA

DNM

KP80

300

247

125

140

180

2”

KP100

300

247

125

140

180

2”

KP120

300

247

125

140

180

2”

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

228

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ØM F G

SURFACE PUMPS

KP 150-300 Series 2”

DAVIES KP 150-300 SERIES Part No.

Phase

Volts

Amps

Code

List Price

220-KP150M

1.5

1.1

230

8.5

$1075.00

220-KP150T

1.5

1.1

400

3.7

$1075.00

220-KP200M

1.47

230

11.5

$1165.00

220-KP200T

1.47

400

4.4

$1165.00

220-KP300M

2.2

230

14.4

$1365.00

220-KP300T

2.2

400

5.2

$1225.00

n n n n

Single Impeller. Hi flow, lo – head – Ideal transfer pump or water circulation. Max pumped liquid temperature: 90°C. Max ambient temperature: 40°C.

TECHINCAL Features: n Pump body: Cast iron G20 with anti-corrosive coating. n Motor bracket: Cast iron G20 with anti-corrosive coatings. n Impeller: Stamped brass UNI-EN 12165. n Pump shaft: Stainless steel Aisi 420A. n Mechanical seal: Carbon-ceramics. Motor Features: n Closed auto-ventilated motor with protection IPX4, two poles, class F insulation. n Single-phase with incorporated motor protector and capacitor permanently connected. n Three-phase with compulsory protection to be provided by the user. n Continuous duty.

KP Series

Performance: 35

DNM

KP150

HEAD (M) DNA

KP200

KP300

KP150

E D

ØM

A KP200

DNM

DNA

100

200

300

400

500

600

FLOW (LPM)

700

H1 A

DIMENSION AND SPECIFICATIONS Model

ØM

DNA

DNM

KP150

369

224

160

228

118

290

2”

26.2

KP200

383

224

160

228

118

290

2”

28.0

KP300

383

224

160

228

118

290

2”

27.9

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

229

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ØM

SURFACE PUMPS

KL Series 3”

DAVIES KL SERIES Part No.

Phase

Volts

Amps

Code

List Price

220-KL200M

1.47

230

10.5

$1245.00

220-KL200T

1.47

400

4.3

$1245.00

220-KL300T

2.2

400

5.1

$1350.00

n n n n

Single impeller. Hi flow – air conditioning or transfer. Max pumped liquid temperature: 90°C. Max ambient temperature: 40°C.

Technical Features: n Pump body: Cast iron G20 with anti-corrosive coating. n Motor bracket: Cast iron G20 with anti-corrosive coatings. n Impeller: Stamped brass UNI-EN 12165. n Pump shaft: Stainless steel Aisi 420A. n Mechanical seal: Carbon-ceramics. Motor Features: n Closed auto-ventilated motor with protection IPX4, two poles, class F insulation. n Single-phase feeding with incorporated motor protector and capacitor permanently connected. n Three-phase feeding with compulsory protection to be provided by the user. n Continuous duty. Performance:

KL Series

HEAD (M)

DNM

KL300

DNA

KL200

KL300

A E D

ØM

4 B

200

400

MODELS

KL 150 KL 200 600 KL 300

40 80 40 80 800 40 80

409 421 1000 421

DNM

DIMENSIONS [mm] E F ∅M

225 225 225

160 160 1200 160

FLOW (LPM)

230 DNA 230 230

11 11 11

DNA

118 118 118

310 310 310

3" 3" 3"

H1 ØM

DIMENSION AND SPECIFICATIONS Model

ØM

DNA

KL200

409

225

160

230

118

310

3”

3” MODELS 31.5

KL300

421

225

160

230

118

310

3”

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

230

33.2

KL 150 KL 200 KL 300

40 40 40

80 80 80

409 421 421

225 225 225

DIMENSIONS [mm] E F ∅M

160 160 160

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

230 230 230

11 11 11

SURFACE PUMPS

BK Series

DAVIES BK SERIES - TWIN IMPELLER Part No.

220-BK151M 220-BK201M 220-BK301T 220-BK401T 220-BK551T 220-BK751T

Phase

Volts

Amps

Code

List Price

1.5 2 3 4 5.5 7.5

1.1 1.5 2.2 3 4 5.5

1 1 3 3 3 3

230 230 400 400 400 400

9.5 11.5 5.2 9 10.5 12.0

D D D D D D

$1060.00 $1155.00 $1240.00 $2140.00 $2220.00 $2730.00

Twin Impeller

The BK series with back to back impellers provide high head pumping for many rural, civil and industrial applications. The ideal farm reticulation pump, simple construction for reliable operation. n Max pumping liquid temperature: 90°C. n Max ambient temperature: 40°C. Technical Features: n Pump body: Cast iron G20. n Middle flange: Cast iron G20. n Pump shaft: Stainless steel Aisi 420A.

n n n

Suction flange: Cast iron G20. Mechanical seal: Carbon-ceramics. Impellers: Stamped brass UNI-EN 12165.

Motor Features: n Closed auto-ventilated motor with protection IPX4, two poles, class F insulation. n Single-phase feeding with incorporated motor protector and capacitor permanently connected. n Three-phase feeding with compulsory protection to be provided by the user. n Continuous duty.

Performance: 100 90

A B

DNM

DNA

70 60

BK150 HEAD (M)

BK200 H

BK551

BK401 30

BK300

BK751

BK400

BK550 BK750

BK301

F G

BK201

BK151

DNM

100

150

200

250

300

DNA

FLOW (LPM) H

DIMENSION AND SPECIFICATIONS Model

DNA

BK151

395

284

131

185

235

9.5

125

1½”

1”

26.5

BK201

395

284

131

185

235

9.5

125

1½”

1”

28.5

BK301

395

284

131

185

235

9.5

125

1½”

1”

28.5

BK401

490 103.5 312.5 160

220

270

9.5

140

2”

1¼”

45.0

BK551

490 103.5 312.5 160

220

270

9.5

140

2”

1¼”

46.5

BK751

496 103.5 357.5 160

240

300

160

2”

1¼”

61.0

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

231

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

K Series Classic

DAVIES CLASSIC K SERIES Part No.

Model No.

Phase

Volts

Code

List Price

Cast Iron Pump Body & Impeller

225-D137200

K ¾ BSP

0.75

0.55

230

MPG18

$1552.00

225-D137391

K¾B

0.75

0.55

400

MPG18

$1552.00

225-D137529

K 1 ¼ BSP

1 .25

0.9

230

MPG18

$1795.00

225-D137596

K1¼B

1.25

0.9

400

MPG18

$1795.00

225-D137766

K3B

3.0

2.2

400

MPG18

$1995.00

$1765.00

Cast Iron Pump Body & Gunmetal Impeller

225-D137200G

K¾B

0.75

0.55

230

MPG18

225-D137391G

K ¾ B SP

0.75

0.55

400

MPG18

$1765.00

225-D137529G

K1 ¼ BSP

1.25

0.9

230

MPG18

$2055.00

225-D137596G

K1 ¼

1.25

0.9

400

MPG18

$2055.00

225-D137766G

K3B

3.0

2.2

400

MPG18

$2340.00

GUNMETAL SUITABLE FOR PUMPING SALTWTER

Gunmetal Pump Body & Impeller

225-D137264

K ¾ BSP

0.75

0.55

230

MPG18

$2450.00

225-D137464

K¾B

0.75

0.55

400

MPG18

$2450.00

225-D137790

K3B

3.0

2.2

400

MPG18

$3750.00

The Davies classic K series are the original rugged and efficient design that’s been proven for over 50 years. Available in cast iron and Gun Metal construction for the agricultural, commercial, industrial and marine industries. Performance:

K Series Classic

20 HEAD (M)

K3/4

K 1 1/4

K 1 1/4 K3/4

100

150

200

250

300

350

400

450

500

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model No.

Height To Discharge

Height to Inlet

Overall Length

Overall Height

Overall Width

Inlet

Outlet

K¾

182

365

220

185

1”

¾”

K1¼

195

380

220

195

1 ¼”

1”

K3B

220

115

420

245

235

1 ½”

1 ¼”

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

232

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

M Series Classic

DAVIES CLASSIC M SERIES BARE SHAFT PUMPS Part No.

Model No.

Code

List Price

MPG18 MPG18

$1500.00 $1772.00

MPG18 MPG18

$1875.00 $2145.00

Cast Iron Pump Body & Impeller

225-D149179 225-D149306

M¾ M 1¼

225-D149179G 225-D149306G

M¾ M 1¼

Cast Iron Pump Body & Gunmetal Impeller

The M series pumps are a bare shaft, pedestal mount centrifugal pump for belt drive from separate power source. Featuring heavy duty cast iron construction with sealed ball bearings and mechanical seals and the option of gunmetal impeller for long term durability in harsh, aggressive applications. These pumps can be used in many applications, including pumping flamable liquids.

Performance: 3/4

M 3/4 Series Classic

1/2hp

3/4hp

1hp

3000rpm 2800rpm 1400

1/3hp

2000 2800

1/4hp

3000

2400rpm

HEAD (M)

2400

1/4hp 1/3hp

2000rpm

1/2hp 3/4hp

1hp

1400rpm

100

150

200

250

FLOW (LPM)

Performance: 1 1/4

M 1 1/4 Series Classic

3000rpm 3hp

2800rpm

1400 2000

2hp

2400

2400rpm

2800 3000

HEAD (M)

Series11

1hp

1/3hp

2000rpm

1/2hp

1hp

1/3hp

2hp 3hp

1400rpm

100

150

200

250

300

350

400

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model No.

Height To Discharge

Height To Centre Of Inlet

Overall Length

Width

Shaft

Discharge

Inlet

M¾

200

105

240

175

5/8”

¾”

1”

M1¼

230

130

295

230

1”

1 ¼”

1½”

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

233

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

SPK Series Classic

DAVIES CLASSIC SPK SERIES SELF PRIMING PUMPS Model No.

Part No.

Phase

Volts

Code

List Price

Cast Iron Pump Body & Impeller

SPK 1 ¼ BSP

225-D167479

1.25

0.9

230

MPG18

$2440.00

SPK 1 ¼ B

225-D167533

1.25

0.9

400

MPG18

$2440.00

Cast Iron Pump Body & Gunmetal Impeller

SPK 1 ¼ BSP

225-D167479G

1.25

0.9

230

MPG18

$2645.00

SPK 1 ¼ B

225-D167533G

1.25

0.9

400

MPG18

$2645.00

Gunmetal Pump Body & Impeller

SPK 1 ¼ BSP

225-D167509

1.25

0.9

230

MPG18

$4615.00

SPK 1 ¼ B

225-D167576

1.25

0.9

400

MPG18

$4615.00

The Davies classic SPK series differ from conventional self-priming pumps as they have no check valve or any other type of valve built in, nor is there any recirculation of water during the pumping cycle once the pump is primed. This unique design gives positive pumping, low cost and maintenance, with high efficiency. No check valve or foot valve is required on the suction hose, but a suitable strainer to prevent large debris entering the pump is necessary. If it is desirable to keep the suction and discharge pipes full, a foot valve or check valve may be used. Once the pump is initially primed, sufficient liquid is always retained to permit the pump to self-prime though the suction and discharge lines drain back to the liquid source. The pump will self-prime without ever vapour locking due to the ability to self-purge gases. This feature allows the pump to operate on “snore” (pumping air and water) continuously without affecting the pump. Should cleaning be necessary the removal of one set screw and cover plate on the front pump allows access to the centre of the impeller and the lower casing. A semi open impeller and a replaceable nylon wear plate is standard in all Davies SP Pumps, allowing solids in suspension to be pumped without blockages occurring provide a suitable suction strainer is used.

Gunmetal Suitable for Saltwater And Corrosive Liquids

SPK Series Classic

Performance: 24

SPK 1 1/4

HEAD (M) 12

7.6 6m 4.5m 3m

1.5m 7.6 6.0

Suction lift limitations (M)

4.5 3.0 1.5

100

200

300

400

500

600

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model

SPK

Height

Overall Length

Width

Suction and Discharge

302

415

185

50mm (2”) BSP

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

234

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

SPM Series Classic

DAVIES CLASSIC SPM SERIES Model No.

Part No.

Code

List Price

MPG18

$1758.00

MPG18

$2100.00

MPG18

$2570.00

MPG18

$3830.00

Cast Iron Pump Body & Impeller

SPM 3

225-D167746 Cast Iron Pump Body & Gunmetal Impeller

SPM 3

225-D167746G Gunmetal Body & Cast Iron Impeller Bearing Housing

SPM 3

225-D167746CG Gunmetal Pump Body & Impeller

SPM 3

225-D167770

The SPM series pumps are a bare shaft, pedestal mount self-priming centrifugal pump for belt drive or direct drive from separate power source with the same unique features of the SPK series. Featuring heavy duty cast iron construction or Gunmetal construction, sealed ball bearings and mechanical seal. Replaceable nylon wear plate to maintain optimum performance when pumping aggressive/abrasive liquids.

SPM Series

Performance: 35

Gunmetal Suitable for Saltwater And Corrosive Liquids

3800rpm 3hp

HEAD (M)

2850rpm

3800rpm

2800rpm 2hp 10

100

200

300

400

500

600

700

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model No.

SPM 3

Height To Discharge

Height To Centre Of Inlet

Overall Length

Width

Shaft

Discharge

Inlet

320

225

300

190

5/8”

2” (50mm)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

235

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CN Series

DAVIES CN SERIES Part No.

Phase

Amps 230v

Code

List Price

400v

690v

6.3 8.7 10.7 15

6.2 8.0

D D D D

$1925.00 $2220.00 $2700.00 $3030.00

6.2 8.7 11 15 23.5

6.2 8.0 11.5

D D D D D

$1850.00 $2020.00 $2630.00 $2840.00 $3775.00

6.5 8.7 11 15 22

6.2 8.0 11.5

D D D D D

$1875.00 $2000.00 $2640.00 $2990.00 $3765.00

11 14 22

6.2 8.0 12.5

D D D

$3010.00 $3150.00 $3800.00

CN32

220-CN32-400 220-CN32-550 220-CN32-750 220-CN32-1000

4.0 5.5 7.5 10.0

3.0 4.0 5.5 7.5

3 3 3 3

220-CN40-400 220-CN40-550 220-CN40-750 220-CN40-1000 220-CN40-1500

4.0 5.5 7.5 10.0 15.0

3.0 4.0 5.5 7.5 11.0

3 3 3 3 3

220-CN50-400 220-CN50-550 220-CN50-750 220-CN50-1000 220-CN50-1500

4.0 5.5 7.5 10.0 15.0

3.0 4.0 5.5 7.5 11.0

3 3 3 3 3

220-CN65-750 220-CN65-1000 220-CN65-1500

7.5 10.0 15.0

5.5 7.5 11.0

3 3 3

10.0 16.0 CN40

10 16.0 CN50

10.0 16.0 CN65

The CN series single impeller pumps have proven to be strong and reliable in the dairy shed and many other washdown applications. n Manufactured according to DN 24255 standards. n Choose from the four ranges – 32, 40, 50 or 65 series. n Max pumped liquid temp: 90°C. n Max ambient temp: 40°C. n Max working pressure: 10bar. n PN16 flanges. Technical Features: n Pump body: Cast iron G20 with anti-corrosive coating. n Motor bracket: Cast iron G20 with anti-corrosive coating. n Impeller: Cast iron G20 with anti-corrosive coating. n Orifices in/outlet: DIN 2532 standards. n Threaded counted flanges: Galvanized steel complete with EPDM gaskets. n Pumps shaft: Stainless steel Aisi 304. n Mechanical seal: Carbon-ceramic. Motor Features: n Closed auto-ventilated motor with protection IP55, two poles, class F insulation. n Three-phase feeding with compulsory protection to be provided by the user. n Continuous duty.

Argon recommends operating pumps with a control panel for simple installation and pump protection. see page 412

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

236

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CN Series

CN32 70

CN32-1000

CN32-750

40 HEAD (M)

CN32-1000 CN32-750

CN32-550

CN32-550 CN32-400

CN32-400

CN32-300

100

150

200

250

300

350

400

450

500

550

FLOW (LPM)

70 60

CN32-550/750/1000

CN32-400

Eﬀ(%) 40 CN32/550/750/ 1000

30 20

CN32-300/400

10 0

100

150

200

250 300 FLOW (LPM)

350

400

450

500

550

9 8

CN32-1000

CN32-750

CN32-550

5 Kw P1 Input 4

CN32-400

CN32-1000 CN32-750

CN32-550

CN32-400

CN32-300

0 0

100

150

200

250 300 FLOW (LPM)

350

400

450

500

550

7 CN32-400

6 5 4 NPSHr (M) 3

CN32-550 CN32-400

CN32-550/750/1000

CN32-300

1 0 0

100

150

200

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

250 300 FLOW (LPM)

237

350

400

450

500

550

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CN Series

CN40 90 80 CN40-2000 70 60

CN40-1500

50 HEAD (M)

CN40-1000

40 30

CN40-750

CN40-550

CN40-400

0 0

100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 FLOW (LPM)

CN40-750/1000

60 50

CN40-400/550

CN40-1500/2000

Eﬀ(%) 40 30 20 10 0

100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 FLOW (LPM)

20 18

CN40-2000

16 14

CN40-1500

12 10 Kw P1 Input 8

CN40-1000 CN40-750 CN40-550 CN40-400

6 4 2 0 0

100

200

300

400 500 FLOW (LPM)

600

700

800

900

7 6

NPSHr (M)

CN40-1500/2000

CN40-400/550

5 4

CN40-750

CN40-1000

2 1 0

100

200

300

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

400 500 FLOW (LPM)

238

600

700

800

900

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CN Series

CN50

40 CN50-1500 HEAD (M) 30

CN50-1500 CN50-1000 CN50-750

CN50-1000 20

CN50-550

CN50-750

CN50-550 CN50-400 CN50-300

CN50-400

0 0

100

200

300

400

500

600

700

800

900

1000

1100

1200

1300

FLOW (LPM)

80 70 60 50 Eﬀ(%) 40 30 20 10

CN50-750/1000

CN50-300/400/550

CN50-400/550

CN50-750/1000

CN50-1500

100

200

300

400

500

600

700

800

900

1000

1100

1200

CN50-1500

1300

FLOW (LPM) 14 12

CN50-1500

CN50-1000 CN50-750

CN50-1000

8 Kw P1 Input 6

CN50-550

CN50-750

CN50-400 CN50-300

CN50-550 CN50-400

4 2 0 0

100

200

300

400

500

600 700 FLOW (LPM)

800

900

1000

9 8

1200

1300

CN50-1500

CN50-400/550

1100

CN50-300/400/550

CN50-750/1000

NPSHr (M) 4

CN50-1500

3 2 1 0

100

200

300

400

500

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

600

239

700 800 FLOW (LPM)

900

1000

1100

1200

1300

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CN Series

CN65

30 CN65-1500

HEAD (M) 20

CN65-1000 CN65-750 10

0 0

200

400

600

800

1000 1200 FLOW (LPM)

1400

90 80 70 60 Eﬀ(%) 50 40 30 20 10

1600

1800

2200

CN65-1500 CN65-750/1000

200

400

600

800

1000 1200 FLOW (LPM)

1400

1600

1800

2000

2200

CN65-1500

12 Kw P1 Input

2000

CN65-1000

CN65-750

6 4 2 0

200

400

600

800

1000 1200 FLOW (LPM)

1400

1600

1800

2000

2200

11 CN65-750/1000

9 7 NPSHr (M)

CN65-1500

3 1 0

200

400

600

800

1000

1200

1400

1600

1800

2000

2200

FLOW (LPM)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

240

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CN Series

CN SERIES DIMENSIONS Model No.

DNA

DNM

CN32-400

400

240

292

240

190

100

132

160

CN32-550

468

273

340

240

190

100

160

180

CN32-750

495

273

340

240

190

100

160

180

CN32-1000

537

273

340

240

190

100

160

180

CN40-400

463

242

292

240

190

100

132

160

45.5

CN40-550

463

242

292

240

190

100

132

160

CN40-750

100

515

278

340

265

212

100

160

180

CN40-1000

100

557

278

340

265

212

100

160

180

CN40-1500

100

600

328

405

320

250

125

180

225

100

CN40-2000

100

682

328

405

320

250

125

180

225

130

CN50-400

100

483

292

240

190

100

132

160

CN50-550

100

483

248

292

240

190

100

132

160

CN50-750

100

515

268

340

265

212

100

160

180

62.5

100

557

268

340

265

212

100

160

180

L65

CN50-1000

73.5

200

100

561

290

360

265

212

100

CN50-1500

100

600

290

360

265

212

100

160

200

CN50-2000

100

682

290

360

265

212

100

160

200

123

CN65-750

100

515

283

340

280

212

125

160

180

64.5

CN65-1000

100

557

283

340

280

212

125

160

180

74.5

CN65-1250

100

565

290

360

280

212

125

160

200

84.5

CN65-1500

100

605

290

360

280

212

125

160

200

91.5

CN65-2000

100

686

290

360

280

212

125

160

200

123

DNA

CN50-1250

a160

DNM

m2 m1

See Pump Controllers pg 412 A and Base Plates pg 393

L a

DNA

DNM

m2 m1

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

241

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

BSN Series

BSN SERIES BARE SHAFT CENTRIFUGAL PUMPS Part No.

Shaft Size

Trim

Code

List Price

220-BSN 40-125A

$1830.00

220-BSN 40-200A

$2350.00

220-BSN 50-125A

$2100.00

220-BSN 50-250A

$2600.00

220-BSN 65-125A

$2300.00

220-BSN 65-200A

$3050.00

220-BSN 80-160A

$3150.00

220-BSN 80-250A

$4500.00

The Davies BSN series cast iron single impeller pumps are a DIN standard bare shaft pump designed for a wide range of applications where a separate power supply is beneficial. There is a range of models suitable for a wide variety of applications up to 4000 l/min and 60m head pressure with specific impeller trims available to select optimum performance. Bare shaft pumps may be pulley driven at speeds up to 3600 RPM. *POA for Impeller trim for Type B or C

Features: Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41). or 90 °C for other use, while the ambient temperature must not be higher than 40°C. n Flow rates up to 240 m3/h. n Heads up to 100 m.

DNM

DNA

Technical Details: n Pump body: cast iron G20 with anti-corrosive coating. n Motor bracket: cast iron G20 with anti-corrosive coating. n Orifices in/outlet: DIN 2532 standards. n Impeller: cast iron G20 with anti-corrosive coating. n Threaded counter flanges: galvanized steel complete with EPDM gaskets. n Pump shaft: stainless steel Aisi 304. n Mechanical seal: carbon-ceramic.

m2 m1

14 110 n2 n1

d DN K D

DIMENSIONS AND SPECIFICATIONS Model

DNA

DNM

BSN 40-125A

BSN 40-200A

100

356

132

160

116.5

100

240

190

254

356

160

180

140

100

265

212

254

BSN 50-125A

356

132

160

101.5

112

100

210

190

254

BSN 50-250A

BSN 65-125A

100

360

180

225

166

170

125

320

250

254

100

356

160

180

112

143

125

280

212

254

BSN 65-200A

100

365

180

225

147

168

125

320

250

258

BSN 80-160A

100

125

365

180

225

135

170

125

320

250

258

BSN 80-250A

100

125

470

200

280

195

218

160

120

400

315

340

FLANGE- FLANGES

HOLES MM

nº

100

140

110

150

125

165

145

185

160

200

100

180

220

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

242

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

BSN Series

QUICK SELECTION PERFORMANCE TABLE - 2900 RPM - 2 POLE Model

M3/H L/M

132

156

180

240

100

200

300

400

500

600

700

800

1000

1100

1300

1600

2200

2600

3000

4000

18.0 18.3

17.5

16.0 13.5 11.0

9.0

BSN 40-125C

1.5

17.5

BSN 40-125B

2.2

22.0 22.5 22.5 22.0 20.5 18.5 16.5 12.5

BSN 40-125A

3.0

26.5

BSN 40-200B

5.5

44.0 44.8 44.5 43.5 42.0 39.0 34.5 29.0 24.5

BSN 40-200A

7.5

54.5 55.0 55.0 54.8 53.8 51.5 48.0 43.0 36.5

BSN 50-125C

2.2

17.5

BSN 50-125B

3.0

22.5 22.5 22.5 22.0 21.5 20.5 19.5 18.5

BSN 50-125A

4.0

25.5 26.0 26.0 25.5 25.3 54.8 24.0 23.0 22.0

BSN 50-250C

15.0

73.0

BSN 50-250B

18.5

82.0 82.5 82.5 82.5 82.5 82.0 81.0 79.5

BSN 50-250A

22.0

BSN 65-125B

5.5

BSN 65-125A

7.5

BSN 65-200C

15.0

44.5 45.0 45.5 46.0 46.5 46.5 46.5 46.5 46.5 46.0 45.8 45.0 42.5 34.5

BSN 65-200B

18.5

48.0 48.7 49.5 49.8 50.0 50.2 50.5 50.5 50.5 50.0 49.8 49.0

52.5 53.0 53.5 53.8 54.0 54.5 54.7 54.8 54.8 54.5 54.0 53.5 52.0 44.5

H (m)

27.5

26.5 25.5 23.7 21.5

18.0 18.0 18.0

74.0

17.5

75.0 75.0 75.0

17.5

16.5 15.5 14.0 12.5

74.5

17.0

72.5 71.5 70.0 65.0 62.0 54.0 78.0

72.5

70.0 61.5

89.5 90.5 91.0 91.0 90.5 90.0 89.0 88.0 86.5 80.5 78.0 69.5 23.5 24.0 24.5 24.8 25.0 25.0 25.0 24.5 24.0 23.0 22.5 20.5 16.0 26.0 26.3 26.5 26.8

27.0

26.8 26.6 26.4 26.0 24.5 23.0 18.5 47.0

39.0

BSN 65-200A

22.0

BSN 80-160D

11.0

27.0

BSN 80-160C

15.0

32.0 32.5 33.0 33.3 33.5 34.0 34.5 34.7 34.5 34.5 34.5 34.2 33.5 30.5

BSN 80-160B

18.5

35.0 35.5 36.0 36.3 36.5

BSN 80-160A

22.0

39.0 39.3 39.5 39.8 40.0 40.5 41.0 41.0 41.0 41.5 41.5 41.2 40.5 38.0 36.5

BSN 80-250C

45.0

67.5

27.7

28.3 28.6 28.8 29.0 29.5 29.7 29.8 29.8 29.8 29.2 28.5 25.0 22.0 37.0

37.5

37.5 70.0

37.5

68.0 68.5 68.8 69.0 69.5 70.0

70.0

87.0

88.0 88.0 88.0

37.0

27.5

34.5 32.0

70.0 68.5 66.0 63.0 50.0

BSN 80-250B

55.0

82.0 82.7 83.5 83.8 85.0 86.0 86.5

BSN 80-250A

75.0

101.5 101.7 101.8 101.9 102.0 102.5 103.0 103.0 103.0 103.5 103.5 104.0 104.0 103.5 102.5 101.5 92.0

87.5

86.0 83.5 81.0 70.0

QUICK SELECTION PERFORMANCE TABLE - 1450 RPM - 4 POLE 0

120

100

150

200

250

300

350

400

500

600

700

850

1100

1300

1500

2000

0.25

4.4

4.5

4.6

4.4

4.0

3.4

2.8

0.25

5.5

5.6

5.5

5.1

4.6

4.1

3.1

BSN 40-125A

0.37

6.6

6.9

6.6

6.4

5.9

5.4

4.4

BSN 40-200B

0.75

11.2 11.1 10.9 10.5

9.8

8.6

7.3

Model

BSN 40-125C BSN 40-125B

M3/H L/M

BSN 40-200A

1.1

13.6 13.8 13.8 13.7 13.5 12.9 12.0 10.8

9.1

BSN 50-125C

0.37

4.4

4.5

4.4

4.1

3.9

3.5

3.1

BSN 50-125B

0.37

5.6

5.5

5.4

5.1

4.9

4.6

4.3

BSN 50-125A

0.55

6.4

6.5

6.4

6.3

13.7

6.0

5.8

5.5

BSN 50-250C

2.2

18.3 18.5 18.8 18.8 18.8 18.6 18.1

17.9

17.5

BSN 50-250B

3.0

20.5 20.6 20.6 20.6 20.6 20.5 20.3 19.9 19.5 18.1 16.6

BSN 50-250A

3.0

BSN 65-125B

0.75

BSN 65-125A

1.1

BSN 65-200C

2.2

11.1 11.3 11.4 11.5 11.6 11.6 11.6 11.6 11.6 11.5 11.4 11.1 10.4

8.6

BSN 65-200B

2.2

12.0 12.2 12.4 12.5 12.5 12.6 12.6 12.6 12.6 12.5 12.4 12.1 11.5

9.8

BSN 65-200A

3.0

13.1 13.3 13.4 13.5 13.5 13.6 13.7 13.7 13.7 13.6 13.4 13.3 12.8 11.1

H (m)

16.3 14.5

22.4 22.6 22.8 22.8 22.6 22.5 22.3 22.0 21.6 20.1 18.5 5.9

6.0

6.1

6.2

6.3

6.1

6.0

5.8

5.4

4.8

3.5

6.5

6.6

6.7

6.8

6.7

6.6

6.5

5.9

5.4

4.3

BSN 80-160D

1.5

6.8

7.0

7.1

7.2

7.3

7.4

7.5

7.4

7.3

7.0

6.3

5.5

BSN 80-160C

2.2

8.0

8.2

8.3

8.4

8.5

8.6

8.7

8.6

8.5

8.3

7.6

6.9

BSN 80-160B

3.0

8.8

8.9

9.0

9.1

9.3

9.4

9.3

9.1

8.6

8.0

BSN 80-160A

4.0

9.8

9.9

10.0 10.0 10.1 10.3 10.3 10.3 10.4 10.4 10.3 10.0

9.5

9.1

BSN 80-250C

4.0

16.9

17.0

17.1

17.2

17.1

16.5 16.8 12.5

BSN 80-250B

5.5

20.5 20.7 20.9 21.1 21.3 21.5 21.6 21.8 21.8 22.0 22.0 22.0 21.9 21.5 20.9 20.3

BSN 80-250A

7.5

25.4 25.5 25.5 25.5 25.5 25.6 25.8 25.8 25.8 25.9 26.0 26.0 26.1 25.9 25.6 25.4 23.0

17.3

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

17.4

17.5

243

17.5

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

ING Series

ING SERIES STUB SHAFT CENTRIFUGAL PUMPS Part No.

Motor Frame

Code

List Price

220-ING 50-250A

180

$3500.00

220-ING 65-200A

180

$3500.00

220-ING 80-200A

200

$4400.00

The Davies ING series cast iron single impeller pumps are a DIN standard stub shaft pump designed for applications where a metric B5 flanged motor mounted to pump is beneficial. There is a range of models suitable for a variety of applications up to 3200 l/min and 85m head pressure with specific impeller trims available to select optimum performance. Correct fame size motors to suit pump mountings are available on request. *POA for Impeller trim for Type B or C Features: Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use. n Flow rates up to 192 m3/h. n Heads up to 90 m. n

L B

Type

DNA

DNM

m2 m1

n2 n1

DIMENSIONS AND SPECIFICATIONS Model

DNA

DNM

Motor Type

Coupling Type

ING-50-250C

100

342

334

405

320

250

125

180

225

180

ING-50-250B

100

342

334

405

320

250

125

180

225

180

ING-50-250A

100

342

334

405

320

250

125

180

225

180

ING-65-200C

100

349

330

405

320

250

125

180

225

180

ING-65-200B

100

349

330

405

320

250

125

180

225

180

ING-65-200A

100

349

330

405

320

250

125

180

225

180

ING-80-200B

125

394

370

430

345

280

125

180

250

100

200

ING-80-200A

125

394

370

430

345

280

125

180

250

100

200

QUICK SELECTION PERFORMANCE TABLE - 2900 RPM - 2 POLE M3/H L/M

100

200

300

400

500

600

700

800

74.5 72.5 71.5

Model

ING 50-250C

15.0

ING 50-250B

18.5

79.5

102

132

156

180

192

72.5 66.5 61.5

ING 50-250A

22.0

ING 65-200C

15.0

ING 65-200B

18.5

ING 65-200A

22.0

ING 80-200B

30.0

55.0 55.5 55.5 55.8 56.0 56.0 54.0 40.0

ING 80-200A

37.0

65.0 65.3 65.5 65.5 66.0 66.0 65.0 59.5 53.0

H (m)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

1000 1200 1300 1400 1700 2200 2600 3000 3200

69.5

46.5 46.5

86.5 80.5 46

45.5

50.5 50.5

49.5 49.0 48.5

44.5 41.5 34.5 46

39.0

54.8 54.8 54.5 53.5 53.5 53.0 51.0 44.5

244

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Davies SPO80 series

N EW

DAVIES SPO80 SERIES Part No.

Volts

220‑SPO80‑130

2.2

230

220‑SPO80‑330

2.2

415

220‑SPO80

Phase

RPM

Code

List Price

$1450.00

2900

$2200.00

2900

$2200.00

The Davies Pumps SPO80 is a rugged cast iron pump with self-priming ability and open impeller that can take up to 30mm solids. They are designed to couple directly to a standard metric single or three phase 2.2Kw 2pole electric motor with standard shaft for reliability and simple servicing. With self-priming ability up to 8m, max head of 16m and max flow of 900 Lpm, the SPO80 is a versatile pump for a wide range of dirty water applications such as underpass drainage, effluent transferring and tank filling from rivers or ponds. Features: n Cast Iron Casing and Impeller n 316 Stainless wear plate n Non-return clacker valve n Large inspection hatch for servicing n B5 Flange motor mount n Max water temp 80ºC

24 21 18 HEAD (M) 15

12 9 6 3 0 0

200

400

600

800

1000

1200

FLOW (LPM) 130mm

Ø3”G

210mm

Ø3”G

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

245

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

SPR Series

DAVIES SPR SERIES SEMI OPEN IMPELLER Part No.

Volts

Code

List Price

220-SPR80-0550

5.5

400

$4480.00

220-SPR80-1000

7.5

400

$5600.00

220-SPR80-1500

400

$6800.00

220-SPR80-2000

400

$8300.00

Heavy Duty Semi Open impeller self-priming transfer pump suitable for pumping clean and dirty water Large Non Clog Semi open impeller and built in check valve for easy self-priming and soft solids handling capability. Replaceable wear plate for maintaining optimum performance.

Semi Open Impeller Self Priming

Applications: n Irrigation. n Tank Filling. n Transfer. n Sump emptying. n Drainage. n Wash-down areas.

Technical Details: n Self-Priming up to 6M. n Maximum temperature: +70ºC. FREE PASSAGE CLEARANCE: Model

Clearance

SPR80-0550

6mm

SPR80-1000

13mm

SPR80-1500

16mm

SPR80-2000

13mm

Optional Upgrades: Abrasion resistant ceramic internal coating. Silicon Carbide hard face seals. Viton or EPDM elastomers (chemical and heat resistant). Full 316 Stainless steel or marine bronze for chemicals or sea water.

n n n n

Construction Materials: n Cast Iron Pump body, impeller & wear plate. n 316 Stainless steel shaft. n NBR/Carbon/Alumina shaft seal (hard face option). Motor Details n Fitted with standard Metric frame motor with Foot/Flange mounting(B3/B5). n 2900 RPM, 50Hz 400Volts Three phase. n IP55 Protection.

DIMENSIONS AND SPECIFICATIONS Model

SPR80-0550

198

3”

800

410

205

375

460

134

280

SPR80-1000

198

3”

800

410

225

395

476

134

300

SPR80-1500

198

3”

1000

470

260

432

515

134

350

SPR80-2000

185

3”

1000

470

275

455

535

134

355

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

246

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

SPR Series

SPR Series 70

SPR80-2000

SPR80-1500 SPR80-1000

HEAD (M)

30 220-SPR80-0550 SPR80-0550 220-SPR80-1000 220-SPR80-1500 220-SPR80-2000

100

200

300

400

500

600

700

800

900

1000

1100

1200

1300

FLOW (LPM)

40 SPR80-1000 SPR80-1500

30 Eﬀ(%)

SPR80-2000

20 SPR80-0550 10 0

200

400

600

800

1000

1200

1400

FLOW (LPM) 16

SPR80-2000

14 12

SPR80-1500

10 Kw P1 Input 8

SPR80-1000

6 4

SPR80-0550

2 0

200

400

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

600

247

800

1000

1200

1400

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CDP Series

CDP – STAINLESS STEEL CENTRIFUGAL Part No.

Phase

Volts

Amps

Code

List Price

220-CDP120/12

1.2

0.92

230

7.0

$590.00

220-CDPS120/12

1.2

0.92

230

7.0

$835.00

220-CDP200/25

2.5

1.85

230

12.5

$940.00

220-CDPS200/25T

2.5

1.85

400

4.5

$1020.00

For general water transfer, circulation, vat wash and many other applications the CDP series stainless steel centrifugal pumps constructed of 304 or 316 stainless steel (S version) will provide years or trouble free service. Continuous duty and IP54 protection for demanding applications. n Maximum ambient temperature: 40°C. n Maximum liquid temperature: 70°C and 110°C for the ‘S’ version*. n Maximum pressure inside pump casing: 6bar. Technical Features: n Pump body: 304 stainless steel. 316 stainless steel for ‘S’ version* . n Impeller: 304 stainless steel. 316 stainless steel for ‘S’ version*. n Pump shaft: 304 stainless steel. n Mechanical seal: Carbon/ceramic. Silicon carbide/ Silicon carbide for CDPS120/12. Motor Features: n Closed auto-ventilated motor with protection IP54, class F insulation. n Single-Phase with incorporated motor protector and capacitor permanently connected. n Three Phase versions require overload protection supplied by user. n Continuous duty.

CDP Series

Performance:

40 35 30 CDP200/25 25 CDP120/12 HEAD (M) 20

15 10 5 0 0

100

150

200

250

300

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model No.

Output

Inlet

Outlet

Maximum

mm Inch mm

CDP120/12 1.25

1.0

32 1¼”

1”

160

15.5

CDP200/25

1.85 40 1½”

1.25”

200

240

2.5

Inch

Rated

Head(m) Flow(l/m) Head(m) Flow(l/m)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

248

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CRD Series

DAVIES CRD SERIES STAINLESS STEEL SINGLE STAGE PUMPS Part No.

Volts

Amps

Code

List Price

220-CRD1-030M

0.33

0.25

230

1.77

$550.00

220-CRD1-050M

0.5

0.37

230

2.4

$595.00

220-CRD1-050T

0.5

0.37

400

0.95

$595.00

220-CRD1-075M

0.75

0.55

230

3.4

$630.00

220-CRD1-100M

1.0

0.75

230

4.45

$670.00

220-CRD1-100T

1.0

0.75

230/400

1.9/3.2

$670.00

220-CRD1-120M

1.2

0.9

230

5.2

$715.00

220-CRD1-120T

1.2

0.9

230/400

2.2/3.7

$715.00

220-CRD1-150M

1.5

1.1

230

6.5

$870.00

220-CRD1-150T

1.5

1.1

230/400

2.5/4.3

$870.00

220-CRD2-100M

1.0

0.75

230

4.0/5.5

$670.00

220-CRD2-100T

1.0

0.75

230/400

1.9/3.2

$670.00

220-CRD2-150M

1.5

1.1

230

6.5

$870.00

220-CRD2-150T

1.5

1.1

230/400

2.5/4.3

$870.00

220-CRD2-200M

2.0

1.5

230

8.8

$925.00

220-CRD2-200T

2.0

1.5

400

3.3/5.8

$925.00

220-CRD2-250M

2.5

1.85

230

$995.00

220-CRD2-250T

2.5

1.85

230/400

4/6.8

$995.00

220-CRD3-100M

1.0

0.75

230

4.5

$670.00

220-CRD3-100T

1.0

0.75

230/400

1.9/3.2

$670.00

220-CRD3-150M

1.5

1.1

230

6.5

$870.00

220-CRD3-150T

1.5

1.1

230/400

2.5/4.3

$870.00

220-CRD3-200M

2.0

1.5

230

8.8

$925.00

220-CRD3-200T

2.0

1.5

230/400

3.3/5.8

$925.00

220-CRD3-250M

2.5

1.85

230

$995.00

220-CRD3-250T

2.5

1.85

230/400

6.7/3.9

$995.00

1100 Rated

All Stainless steel wet end single impeller centrifugal pump for CIP (clean in place) applications, circulation and pressure boosting. High temperature rated with EPDM or Viton elastomers. Applications: n Dairy Vat wash. n Chilled water closed loop circulation. n Hot water washing and circulation. n Pressure boosting. n Filtration. n Wash-down .

Technical Details: n Maximum liquid temperature: +110oC. n Minimum liquid temperature: -15oC. n Maximum casing pressure: 8Bar. Optional Upgrades: n Viton elastomers (chemical and heat resistant). Construction Materials: n 304 Stainless steel Pump body, seal plate, shaft & impeller. n Mechanical seal: Silicon carbide/Carbon/EPDM. Motor Features: n Totally enclosed, fan cooled. Continuous rated. n 2900 RPM, 50Hz 230V Single phase or 400Volts Three phase. n IP55 Protection. n Single phase version fitted with auto reset internal overload. n Three phase version requires user supplied overload. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

249

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CRD Series

CRD 1 40 35 CRD1-150 30

CRD1-120

CRD1-100

HEAD (M) 20

CRD1-075

CRD1-050

CRD1-030

5 0 0

FLOW (LPM)

100

120

140

CRD 2 45 40 CRD2-250

35 30

CRD2-200

CRD2-150

HEAD (M)

20 CRD2-100 15 10 5 0 0

100

120

140

160

180

200

FLOW (LPM)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

250

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CRD Series

CRD 3 35

30 CRD3-250 25

CRD3-200

CRD3-150

HEAD (M)

CRD3-100

0 0

100

150

200

250

300

FLOW (LPM) DIMENSIONS AND SPECIFICATIONS Model

DNA

DNM

CRD1-030

170

302

196

108

182

181

100

130

1¼”

1”

5.7

CRD1-050

213

327

232

108

124

211

210

120

160

1¼”

1”

8.2

CRD1-075

213

327

232

108

124

211

210

120

160

1¼”

1”

9.2

CRD1-100

213

327

232

108

124

211

210

120

160

1¼”

1”

10.6

CRD1-120

213

327

232

108

124

211

210

120

160

1¼”

1”

11.0

CRD1-150

235

383

252

120

132

260

234

140

180

1¼”

1”

13.8

CRD2-100

213

327

232

108

124

211

210

120

160

1¼”

1”

10.5

CRD2-150

213

370

232

108

124

248

222

120

160

1¼”

1”

13.2

CRD2-200

235

383

252

120

132

260

234

140

180

1¼”

1”

16.0

CRD2-250

235

383

252

120

132

260

234

140

180

1¼”

1”

18.0

CRD3-100

213

328

232

108

124

211

210

120

160

1½”

1”

10.5

CRD3-150

213

371

232

108

124

248

222

120

160

1½”

1”

13.1

CRD3-200

213

371

232

108

124

248

222

120

160

1½”

1”

15.4

CRD3-250

213

371

232

108

124

248

222

120

160

1½”

1”

17.0

H3(H4)

DNA

DNM

M A

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

N N1

251

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CRT Series

DAVIES CRT SERIES STAINLESS STEEL TWIN IMPELLER PUMPS Part No.

Volts

Amps

Code

List Price

220-CRT1-150M

1.5

1.1

230

6.4

$1040.00

220-CRT1-200M

2.0

1.5

230

8.8

$1100.00

220-CRT2-250M

2.5

1.85

230

$1200.00

The CRT Series twin impeller centrifugal pumps provide the extra pressure for wash down areas, CIP (clean in place) applications, circulation and pressure boosting. High temperature rated with EPDM or Viton elastomers. Applications:

n Dairy Vat wash. n Chilled water closed loop circulation. n Hot water washing and circulation. n Pressure boosting. n Filtration. n Wash-down .

H3(H4)

CRT Series

Performance:

DNA

DNM

M A

50 CRT1-200M

CRT1-150M

DNA

DNM

H3(H4)

CRT2-250M H1

HEAD (M) 30

M A

N N1

0 0

100

120

140

160

180

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model

DNA

DNM

CRT1-150M

235

421

257

120

137

260

224

140

180

1¼

15.8

CRT1-200M

235

421

257

120

137

260

224

140

180

1¼

CRT2-250M

235

421

257

120

137

260

224

140

180

1¼

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

252

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

N N1

SURFACE PUMPS

CDX Series

EBARA CDX SERIES STAINLESS STEEL SINGLE STAGE PUMPS Part No.

Volts

Code

List Price

220-CDXM-70/05

0.5

0.37

230

$680.00

220-CDXT-70/05

0.5

0.37

400

$680.00

220-CDXM-70/07

0.7

0.55

230

$740.00

220-CDXT-70/07

0.7

0.55

400

$740.00

220-CDXM-90/10

1.0

0.75

230

$830.00

220-CDXT-90/10

1.0

0.75

400

$830.00

220-CDXM-120/07

0.7

0.55

230

$910.00

220-CDXT-120/07

0.7

0.55

400

$910.00

220-CDXM-120/12

1.2

0.88

230

$1000.00

220-CDXT-120/12

1.2

0.88

400

$1000.00

220-CDXM-120/20

2.0

1.47

230

$1375.00

220-CDXT-120/20

2.0

1.47

400

$1375.00

220-CDXM-200/12

1.2

0.88

230

$1195.00

220-CDXT-200/12

1.2

0.88

400

$1195.00

220-CDXM-200/20

2.0

1.47

230

$1410.00

220-CDXT-200/20

2.0

1.47

400

$1410.00

220-CDXT-200/25

2.5

1.85

400

$1475.00

Proven for years and years are the CDX series single impeller centrifugal pumps in dairy sheds, industrial circulation and CIP (clean in place) applications. Optional High temperature/chemical resistant upgrade to Viton seals available. Applications: n Dairy Vat wash. n Chilled water closed loop circulation. n Hot water washing and circulation. n Pressure boosting. n Filtration. n Wash-down.

Technical Details: n Maximum liquid temperature: 90oc (+60oc for CDX 70/05, 70/07 & 90/10 models). n Minimum liquid temperature: -10oC. n Maximum casing pressure: 8Bar. Optional Upgrades: n Viton elastomers (chemical and heat resistant). Construction Materials: n 304 Stainless steel Pump body, seal plate, & impeller. n 303 Stainless steel shaft (shaft extension). n Mechanical seal: Carbon/ceramic/NBR. Motor Features: n Totally enclosed, fan cooled. Continuous rated. n 2800 RPM, 50Hz 230V Single phase or 400Volts Three phase. n IP55 Protection. n Single phase version fitted with auto reset internal overload. n Three phase version requires user supplied overload.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

253

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CDX Series

35 30 25 CDX70/07

CDX90/10

CDX70/05

HEAD (M)

15 10 5 0 0

100

120

FLOW (LPM)

3 2 NPSH (M)

CDX90/10

CDX70/05 CDX70/07

1 0 0

FLOW (LPM)

100

120

45 40 35 30 HEAD (M)

CDX120/20

25 CDX120/12

20 CDX120/07

15 10 5 0 0

100

120

160

180

200

CDX120/20

4 NPSH (M)

140

FLOW (LPM)

CDX120/07

3 2

CDX120/12

1 0 0

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

100

FLOW (LPM)

254

120

140

160

180

200

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CDX Series

45 40 35 30 HEAD (M)

CDX200/25

CDX200/20

20 CDX200/12

15 10 5 0 0

100

120

140

160

180

200

220

240

260

280

260

280

FLOW (LPM)

CDX200/25

CDX200/12 CDX200/20

NPSH (M)

1 0 0

100

120

140

160

FLOW (LPM)

180

200

220

240

DIMENSIONS AND SPECIFICATIONS Model

DNA

220-CDXM-70/05 220-CDXM-70/07 220-CDXM-90/10 220-CDXM-120/07 220-CDXM-120/12 220-CDXM-120/20 220-CDXM-200/12 220-CDXM-200/20 220-CDXT-70/05 220-CDXT-70/07 220-CDXT-90/10 220-CDXT-120/07 220-CDXT-120/12 220-CDXT-120/20 220-CDXT-200/12 220-CDXT-200/20 220-CDXT-200/25

208 208 208 208 208 232 208 208 208 208 208 208 208 232 208 208 232

318 318 318 318 318 345 318 345 318 318 318 318 318 345 318 345 345

178 178 178 178 178 199 178 199 178 178 178 178 178 199 178 199 199

229.5 229.5 229.5 229.5 229.5 250 229.5 229.5 229.5 229.5 229.5 229.5 229.5 250 229.5 229.5 250

106 106 106 106 106 118 106 106 106 106 106 106 106 118 106 106 118

123.5 123.5 123.5 123.5 123.5 132 123.5 123.5 123.5 123.5 123.5 123.5 123.5 132 123.5 123.5 132

209 209 209 209 209 235 209 223 209 209 209 209 209 235 209 223 235

215 215 215 215 215 253 215 240 215 215 215 215 215 253 215 240 -

50 50 50 50 50 55 50 55 50 50 50 50 50 55 50 55 55

38 38 38 38 38 40 38 40 38 38 38 38 38 40 38 40 40

120 120 120 120 120 140 120 140 120 120 120 120 120 140 120 140 140

160 160 160 160 160 180 160 180 160 160 160 160 160 180 160 180 180

108 108 108 108 108 105.5 108 105.5 108 108 108 108 108 105.5 108 105.5 105.5

11 11 11 11 13.5 13.5 13.5 13.5 11 11 11 11 13.5 13.5 13.5 13.5 -

92.5 92.5 92.5 92.5 92.5 95 92.5 95 92.5 92.5 92.5 92.5 92.5 95 92.5 95 95

1¼ 1¼ 1¼ 1¼ 1¼ 1¼ 1½ 1½ 1¼ 1¼ 1¼ 1¼ 1¼ 1¼ 1½ 1½ 1½

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

255

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CKD Series

DAVIES CKD SERIES Model

Kw (P2)

Phase

Volts

Amps

Code

List Price

CKD-050M CKD-100M

0.5

0.37

230

2.4

$540.00

1.0

0.75

230

$675.00

CKD-150M

1.5

1.1

230

$875.00

CKD-150T

1.5

1.1

230/400

4.1/2.4

$875.00

CKD-200M

2.0

1.5

230

8.8

$950.00

CKD-200T

2.0

1.5

230/400

3.3

$950.00

CKD-300T

3.0

2.2

400

9.0/5.2

$1050.00

CKD-400T

4.0

3.0

230/400

10.2/5.9

$1200.00

Semi Open Impeller

Typical Applications: n Circulation. n Industrial washing n Transfer.

and rinsing.

Pump Type: Non self-priming open impeller centrifugal pump for pumping clean or dirty, thin, non-explosive, non-flammable liquid. Motor Features: n Totally enclosed, fan cooled. n Rated speed: 2850 RPM - 50Hz. n Single phase voltage range: 220-240V (PSC Type motor). n Three phase voltage range: 220-240/380-415. n Insulation: Class F. n Protection: IP55 . n Single phase versions fitted with internal reset overload. n Three phase version require user supplied overload to be fitted in installation. Operation limitations: n Maximum ambient temperature: +40oC. n Liquid temperature range: -20oc to + 110oC. n Maximum operating pressure: 8.0bar/115PSI. C C1

CONSTRUCTION MATERIALS

Impeller

304 Stainless steel

Shaft

304 Stainless steel

Mechanical seal

Silicon carbide/Carbon

O-Rings/Elastomers

N2 N N1

EPDM

Motor Mount bracket/Casing

DNA

304 Stainless steel

Pump Casing

Material H3(H4)

Description

DNM

Aluminium

H3(H4)

C C1

DIMENSIONS AND SPECIFICATIONS Model

DNA

DNM

CKD-050

170

295

190

103

1¼”

1”

7.0

CKD-100

170

358

225

108

118

1½”

CKD-150

170

400

250

120

133

100

2”

CKD-200

193

400

250

120

133

100

2”

CKD-300

193

435

250

120

133

100

2½”

2”

CKD-400

193

435

250

120

133

100

2½”

2”

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

256

N2 N N1

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

0 0

SURFACE PUMPS

200

400

600

800

1000

1200

FLOW (LPM)

CKD Series

CKD-050 12

CKD-050

8 HEAD (M)

0 0

100

120

FLOW (LPM)

CKD 100-400

18 16 CKD-400 14 CKD-300

12 HEAD (M) 10

CKD-200

8 CKD-150 6

CKD-100

4 2 0 0

200

400

600

800

1000

1200

FLOW (LPM)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

257

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Albajet Series

ALBAJET SERIES Part No.

220-ALBAJET-75

Phase

Volts

Code

List Price

0.75

0.6

230

$450.00

The Alba75 polypropylene jet pump is for general and slightly corrosive applications. Because the shaft is protected by a sleeve it is suitable for liquids that attack steel parts. With suction capacity of up to 8-9m and pressure up to 42m this pump has many applications. Features: Small house water supply. Header tank filling. Commercial and industrial washing, circulation and supply. Maximum ambient temperature: 40°C. Maximum Liquid temperature: 35°C. IP44 protection.

n n n n n n

Performance:

45 40 35 30 ALBAJET75

25 HEAD (M)

20 15 10 5 0 0

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model No.

ALBAJET-75

DNA

DNM

M 1¼” M 1¼”

202

169

138

105

155

220

195

175

325

150

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

258

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CLP Series

CLP SERIES COOLANT PUMPS 50/60HZ Part No.

Length (mm)

Phase

Volts

Code

List Price

240-CLP-100M-100A

1/8

100

115/230

$310.00

240-CLP-100T-100A

1/8

100

415

$310.00

240-CLP-100M-150A

1/8

150

115/230

$320.00

240-CLP-100T-150A

1/8

150

415

$320.00 $330.00

240-CLP-100M-180A

1/8

180

115/230

240-CLP-100T-180A

1/8

180

415

$330.00

240-CLP-100M-220A

1/8

220

115/230

$340.00

240-CLP-100T-220A

1/8

220

415

$340.00

240-CLP-200M-180A

1/4

180

115/230

$535.00

240-CLP-200T-180A

1/4

180

415

$535.00 $575.00

240-CLP-200T-270A

1/4

270

415

240-CLP-375T-240

1/2

240

415

$875.00

240-CLP-750T-290

1.0

290

415

$1096.00

n n n

Now incorporates strainer mesh to stop blockages. Other lengths available on request. Maximum liquid temperature: 50°C .

Technical Features: n Pump body: Plastic/ABS. n Impeller: Plastic/ABS. n Strainer and riser pipe: Powder coated steel. Motor Features: n Fan cooled Aluminium construction. n Single phase has incorporated capacitor, three phase overload protection to be provided by the user.

CLP Series

Performance: 20

18 16 14 12 HEAD (M) 10

CLP750

6 CLP375

CLP200

CLP100

0 0

100

120

140

160

180

200

220

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Type

A (Diameter)

B (Hole Centres PCD)

Discharge

CLP-100

127

3/8”

CLP-200

128

156

1/2”

CLP-375

128

180

1”

CLP-750

152

180

1”

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

259

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Jimmy 90 Booster Pump

JIMMY 90 HOME BOOSTER PUMP Part No.

220-JM90 n n n n n n n

Watts

Phase

Volts

Code

List Price

1/10

110

230

$250.00

Pressure too low in the Shower? Try the Jimmy 90 Home booster pump. Increase pressure by up to 9m. Virtually silent operation with automatic on/off by the flow switch. Low flow activation - down to 1.5LPM. Maximum ambient temperature: 55°C. Maximum liquid temperature: 110°C. Maximum pressure inside pump casing: 6bar.

Technical Features: n Pump body: FC200 cast iron. n Impeller: Glass reinforced plastic. n Pump shaft: Ceramic. Motor Features: n Stainless steel canned rotor Type. n Class F insulation and impedance protected. Supplied with 1/2” Stainless steel union and clear strainer

JM90 Series

Performance: 9 8 7

(P) 3/4''

6 5

JM90 160

HEAD (M)

4 3 2 50

1 0 0

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model No.

JM90

Max Flow (m3/h)

Max Head

Inlet/Outlet (P)

Weight (Kg)

Pipe Connection Union

1.5

3/4”

2.5

1/2

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

260

108

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

CKRS Inline Circulator

CKR SERIES CIRCULATING PUMP Part No.

Watts

Port to Port Dimension

Amps

Volts

Phase

Code

List Price

220-CKRS130/45 220-CKRS130/55 220-CKRS180/45 220-CKRS180/55

62/53/43 73/59/46 62/53/43 73/59/46

130mm 130mm 180mm 180mm

0.27 0.32 0.27 0.32

230 230 230 230

1 1 1 1

D D D D

$290.00 $330.00 $305.00 $345.00

$35.00

stainless steel connection kit 1” - 11/2” 2sets

229-279-001

The CKRS Inline circulating pump have been designed to pump warm liquids without suspended abrasives that can damage the wet rotor operation. n Maximum liquid temperature: 110oC. n Minimum liquid temperature: 5oC. n Maximum Glycol content 30%. Technical Features: n Pump body: Stainless steel 304. n Rotor sleeve and motor flange: Stainless steel 303. n Bearing: graphite. n Impeller: Noryl®. n Pump shaft: Stainless steel Aisi 420. Motor Features: n Asynchronous wet rotor motor, operating at 3 speeds protection IP44, two poles, class F insulation. n Single-phase feeding with incorporated motor protector and capacitor permanently connected. n Continuous duty.

CKRS130/45 & 180/45

( P)

3 HEAD (M)

HW- 130 L HW- 180 L

1 1 0 0

FLOW (LPM)

CKRS130/55&180/55

5 4 HEAD (M)

1 0 0

FLOW (LPM)

135

DIMENSION AND SPECIFICATIONS Model

Max. Flow (m3/h)

Max. Head (M)

CKRS130/45

3.2

130

1½”

2.3

CKRS130/55

3.5

180

1½”

2.6

CKRS180/45

3.2

130

1½”

2.3

CKRS180/55

3.5

180

1½”

2.6

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

261

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

EEM Series

TELLARINI EEM SERIES LIQUID RING PUMPS Part No.

Phase

Volts

RPM

Amps

Code

List Price

220-EEM20L

0.2

0.15

230

1400

1.1

$375.00

220-EEM20

0.5

0.37

230

2800

1.9

$399.00

220-EEM25

0.6

0.45

230

1400

3.1

$560.00

220-EEM30

1.0

0.75

230

1400

3.8

$590.00

220-EEM40

1.2

0.9

230

1400

5.0

$810.00

The EEM series liquid ring pumps by Tellarini Italy are the best solution for liquid transfer because of the high self priming ability and the ability to operate with air in the suction line. n Max suction lift: 6m. n Maximum liquid temp: 90°C. n Max density 1.1 g/cm3 without hard particles e.g sand. n Example of liquids: water, seawater, diesel, milk. Technical Features: n Pump Body: Bronze. n Impeller: Bronze. n Shaft: 316 Stainless steel. n Seal: Lip NBR.

EEM Series

Performance:

32 28 24 EEM20

20 HEAD (M) 16

12 8

EEM40 EEM25

EEM20L

EEM30

0 0

100 110 120 130 140 150 160

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model No.

EEM20

248

¾”

EEM20L

248

¾”

EEM25

318

1”

100 120 20 20 63

121 172

5.8

¾”

100 120 20 20 63

121 172

5.8

1”

112 141 25 25 71 63 110 190

9.0

EEM30

90 346

1½” 103 1½” 112 148 30 30 71

74 116 190 10.5

EEM35

90 346

1½” 103 1½” 112 148 35 35 71

74 116 190 10.5

EEM40

90 346

1½” 103 1½” 112 148 40 40 71

74 116 190 11.5

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

262

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

Special Pumps

HG GEAR PUMP - BRASS Part No.

220-HG100 n n n n n

Inlet/Outlet

Max L/M

Max PSI

Code

List Price

1”/25mm

100

$450.00

General Purpose Gear Pump for Oils, Water, Brine, Dyes and Syrup. Stainless Steel Shaft + Gears. Brass Pump Housing. Maximum RPM: 1800. Shaft Size: 5/8”

Performance Table: HG GEAR PUMP - BRASS PSI

100

RPM

LPM

1800 1200 900 1800 1200 900 1800 1200 900 1800 1200 900 1800 1200 900

40 27 20 45 30 22 50 32 24 55 36 27 60 45 30

2 1.5 1 1.5 1 0.75 1 0.75 0.5 1 0.75 0.5 0.5 0.5 0.3

KG GEAR PUMP - STAINLESS STEEL 304 Part No.

220-KG-3 n n n n

Inlet/Outlet

Max L/M

Max PSI

Code

List Price

1”/25mm

$1470.00

General Purpose Belt Drive Gear Pump for Oils, Water, Brine, Dyes and Syrup. Stainless Steel Shaft/Gears and housing. Maximum RPM: 430. Shaft Size: 19mm

EBM ALPHA EVAPORATIVE COOLER PUMP Model No.

240-alpha

Outlet

Volts

phase

Amps

List Price

20mm

240

0.17

$190.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

263

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SURFACE PUMPS

MDP Series

MDP SERIES Part No.

Watts (P2)

Volts

Amps

Code

List Price

220-MDP010

5 (15)

230

50/60

0.19

$220.00

220-MDP020

20 (45)

230

50/60

0.24

$310.00

220-MDP040

65 (95)

230

50/60

0.52

$560.00

220-MDP070

150 (210)

230

50/60

1.3

$710.00

220-MDP100

260 (365)

230

50/60

1.6

$830.00

Mag Drive

The MDP series has full polypropylene wet end with magnet driven impeller for reliable, long service life in difficult applications or for pumping corrosive liquids where normal mechanical seal or shaft would be damaged. Max temp 80 degrees. Applications: n Aquaculture. n Horticulture. n Air conditioning. n Refrigeration. n Dosing.

*Please check chemical compatibility with polypropylene before usage. Performance: 50Hz 10

8 HEAD (M)

MDP100

6 MDP40

MDP70

MDP20 2

MDP10

100

110

Port

FLOW (LPM)

DIMENSIONS AND SPECIFICATIONS Model No.

MDP010

104

14mm OD Tail

MDP020

120

106

208

100

28.5

93.5

3/4" Tail

MDP040

120

130

250

100

137

3/4" Tail

MDP070

130

155

258

110

149

1" Tail

MDP100

156

175

321.8

100

110

64.8

43.5

146.8

1" Tail

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

264

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

MiniBlaze & Blazemaster - Loncin Engine

PENTAIR PUMPS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

265

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ONGA PUMPS

Index MiniBlaze & Blazemaster - Loncin Engine

268

269

270

PENTAIR PUMPS JS Series

271

SMH Series

272

Intellimaster

276

273

Waterswitch

280

OJ Series

281

274

500 Series

280

Aquapack Steel Pressure Tanks

281

283

SeaBass Series

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

JJ Series

Aquapack Stainless

282

OHPV range

Multi Evo

284

400 Series 266

Prosource range

14 Series

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ONGA PUMPS

284

Index MiniBlaze & Blazemaster - Loncin Engine

284

112 Series

287

12 & 15 Series

288

Southern Cross ISO

290

295

MiniBlaze

OJ Engine Driven

VF150 Submersible Dominator Submersible

5000 Series

298

300

CSM Vortex Submersible

Simer 5 utility Compac 200 Series

301

SLV Series 2088 Series

CSM Cutter Submersible

305

304

8000 Series

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Signature 2000 Borehole Pumps

Drenox Series

303

302

LCT65VR

293

297

300

WC FIX and Flood box

GP960 Engine Drive

Blazemaster Yanmar Engine

Franklin Submersible Motors

299

289

292

296

SSS Series

252 Series

288

292

Blazemaster (Briggs & Stratton) Blazemaster (Honda)

286

285

9000 Solar Series 267

Accessories and Spare Parts

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

JS Series & Blazemaster - Loncin Engine MiniBlaze

PENTAIR PUMPS

ONGA JS SERIES Model

Watts

Amps

Code

List Price

225-JS1000

0.4

300

2.65

$490.00

225-JS1100

0.6

450

2.9

225-JS1200

1.0

750

4.8

$670.00

JSK$844.00 Range Performance

The JS range of Pressure Systems includes three pump and tank combinations to suit almost any home. The JS range of pumps features a strong stainless steel pump casing, with precision moulded nternals. The suction inlet is set high on the pump body to enhance self priming and air handling ability.

■ ■ ■

APPLICATIONS ■ Automatic domestic water pressure systems. ■ High suction lift situations.

JSK Range Performance

Model

JSK100

Pressure Suction Depth (Metres) Watts Current Switch Capacity (Litres per Min) Port Size (BSP) Setting (Amps) (k Pa) 0 1.5 3.0 4.6 6.1 7.6 Suction Discharge 300

2.65

140-275 30 27 24 21 17 12

1”F

JSK110

450

2.9

140-275 40 36 32 28 23 16

1”F

JSK120

750

4.8

210-345 76 69 61 53 43 31 11/4”M* 1”F

ONGA HOMEMASTER JSK SERIES - PRESURE Pressure SuctionSYSTEM Depth (Metres)

Model Model

Code: N

JSK100 JS1000

Watts Current Switch Setting (Am8L ps) (k Pa)

JS1200

12L

1”F

$693.00

140-275 40 36 32 28 23 225-JSK1200 1”F 16 1”F

$1112.00

225-JSK1100

450

2.9

List Price

24L

300 225-JSK100 2.65 140-275 30 27 24 21 17 12

JS1100

JSK110

Capacity (Litres per Min) Port Size (BSP) 0 1.5 3.0 4.6 6.1 7.6 Suction Discharge

Pressure Tank Size

$899.00

JSK120 The JSK range of750 pressure includes76 three69pump 4.8systems 1”Falmost any home. 210-345 61 and53tank43combinations 31 11/4”M*to suit

■

ONGA HOMEMASTER JSP SERIES - PRESURE SYSTEM Model Code: N

JS1000

Controller Type MP1100

List Price PC1100W

225-JSM1000

$749.00

JS1100

225-JSP1100

$1007.00

JS1200

225-JSP1200

$1179.00

■

■ ■

Equipped with electronic pressure control, the JSP range is designed for situations requiring strong, constant pressure. These pumps also have stainless steel casing and precision-moulded internals. Loss of prime protection to prevent dry running.

APPLICATIONS ■ Automatic, constant pressure household water supply, especially with suction lift. *Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

268

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SMH Series MiniBlaze & Blazemaster - Loncin Engine

PENTAIR PUMPS

ONGA SMH MULTISTAGE Model No.

Watts

Amps

Code

List Price

225-SMH450

0.6

450

3.2

$612.00

225-SMH550

0.75

550

4.0

$750.00

225-SMH750

1.0

750

4.6

$881.00

225-SMH900

1.2

900

5.8

■ ■ ■ ■ ■ ■

$978.00 SMHP Range Performance

The SMH range provides solutions for average sized homes right up to the largest applications. Stainless steel motor shaft and pump casing for corrosion resistance and longer life. Precision moulded components provide high efficiency and low noise. Stainless steel pump foot helps to prevent corrosive sitting water and provides easy installation. D.R.O.P : Dry run overheat protection system protects pump from damage due to overheating. Certified for potable water.

SMHP Range Performance

Model

SMHP45

Operating Suction Depth (Metres) Watts Current Pressure Capacity (Litres per Min) Port Size (BSP) 1.5 3.0 Suction Discharge 0 (Amps) (k Pa) 450

3.2

140

1”F

1”M

SMHP55

550

4.0

140

1”F

1”M

SMHP75

750

4.6

210

1”F

1”M

SMHP90

1000

5.8

210

1”F

1”M

ONGA SMH PRESSURE SYSTEM Operating Suction Depth (Metres)

Model

Pump Model

Code: N SMHP45

SMH450 SMH550 SMHP55

Watts Current Pressure Capacity (Litres per Min) Port Size (BSP) Pressure Tank Size 1.5 3.0 Suction Discharge 0 (Amps) (k Pa) 450

■

3.2

225-SMHK450

550

SMH750

SMHP75 SMH900

750

12L

140

- 4.0 -

140

- 4.6

210

225-SMHK550 66 73

1000

5.8

210

1”F

24L

1”F

Complete pressure system package ready to go.

SMHP90

1”M 1”M

List Price

$854.00 $990.00

225-SMHK750

$1137.00 $1233.00

72-

1”M 59 225-SMHK900 1”F

1”F

1”M

ONGA SMH PRESSURE SYSTEM – ELECTRONIC AUTO CONTROLLER PRESSURE SYSTEM Pump Model Code: N

Controller Type

List Price

PC1100

PC1100-202

SMH450

225-SMHP450

$919.00

SMH550

225-SMHP550

$1056.00

SMH750

225-SMHP750

SMH900 ■ ■

$1185.00

SMHP900

$1280.00

The perfect household pressure pump. Coupled with electronic pressure control, these pumps give you a fantastic shower with constant pressure and run dry protection.

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

269

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Multi Evo & Blazemaster - Loncin Engine MiniBlaze

PENTAIR PUMPS

ONGA MULTI EVO Model

Part No.

Amps

DNA

DNM

Code

List Price

MultiEvo-A-3-40M

225-MEV3-40M

1.1

0.8

3.7

POA

MultiEvo-A-3-50M

225-MEV3-50M

1.34

4.4

POA

MultiEvo-A-3-60M

225-MEV3-60M

1.68

1.25

5.7

POA

MultiEvo-A-5-40M

225-MEV5-40M

1.5

1.1

4.7

POA

MultiEvo-A-5-50M

225-MEV5-50M

1.8

1.35

6.2

POA

MultiEvo-A-5-60M

225-MEV5-60M

2.2

1.65

7.5

POA

MultiEvo-A-8-50M

225-MEV8-50M

2.7

1.25"

POA

■ ■ ■ ■ ■

High-level reliability - thanks to the resistant and innovative design Silent operation - improved user comfort thanks to its silent operation Compact form Wide range of performance levels for the residential market. Excellent priming capacity.

SPECIFICATIONS: PUMP ■ Hydraulic performance conforms to ISO 9906:2012 - Grade 3B ■ Type of liquid: clean water with no suspended solids or abrasive material ■ Maximum liquid temperature 50°C ■ Maximum operating pressure 8 bar MOTOR ■ Enclosed, air ventilated (TEFC) ■ 2 poles, 50 Hz (n=2850 rpm) ■ IE3 three-phase AC (P2 ≥ 0.75 kW) ■ Protection class: IP55 ■ Insulation class: F ■ Maximum room temperature 40°C ■ Single phase power supply with permanently inserted condenser and thermal protection incorporated into motor winding 80

MultiEvo

Evo 3/40 Evo 3/50 Evo 3/60 Evo 5/40

Evo 5/50 Evo 5/60 Evo 8/50

HEAD (M) 40

100

150

200

FLOW (LPM) Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

270

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PENTAIR PUMPS

Intellimaster MiniBlaze & Blazemaster - Loncin Engine

ONGA INTELLIMASTER Part No

Volts

RPM

Code

List Price

225‑IMH750K

0.75

230

2890

3.1

$1850.00

225‑IMH1100K

1.1

230

2890

4.4

$2115.00

225‑IMH2200K

2.2

230

2890

8.2

$2885.00

Our NEW Intellimaster series are the perfect environmental friendly energy saving pump. All models use advanced variable speed technology while generating significantly less power compared to a conventional fixed speed pump, substantially lessening your running costs and saving you money in operating costs. The Intellimasters are also an ECO SELECT® branded product line, identifying as our “greenest” and most efficient pump choices. By combining efficient pump design with game-changing variable speed technology, the Intellimaster pump delivers fantastic energy savings while reducing consumption of valuable resources and noise pollution. APPLICATIONS: Domestic pressure system, pressure boosting, irrigation and garden water supply and water transfer.

KEY FEATURES ■ Large LCD Display with adjustable pressure set point ■ 16Bar Transducer pressure gauge ■ Stainless steel five-way tee with inbuilt non-return valve ■ Quiet operation ■ Fan-cooled motor with inbuilt thermal overload ■ Max. Head - 58m ■ Max. Flow - 270lpm

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

271

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Waterswitch MiniBlaze & Blazemaster - Loncin Engine

ONGA PUMPS

ONGA WATERSWITCH - FLOATLESS Part No.

Volts

Amps

Code

List Price

345-WS1500210

230

0.9

$1035.00

$135.00

345-707170

Low level cut out float kit

Features: ■ Watermark approved. ■ Automatic water saving device. ■ Seamlessly switches between mains and rainwater tank. ■ No mixing of mains and tank water. ■ Low pressure drop through device. ■ Normally open solenoid allows mains water to flow as normal in case of power outage. ■ Max. flow - >200 lpm (via pump inlet). Applications: Use your rainwater for: ■ the washing machine, ■ toilet flushing, ■ car washing, ■ garden watering. Technical Features: ■ Fluid: Water ■ Minimum flow rate: 21Lpm ■ Maximum water temperature: 40°C. Minimum water temperature: 1°C. ■ Maximum ambient temperature: 40°C. Minimum ambient temperature: 1°C. ■ Minimum mains pressure: 100kPa. Maximum mains pressure: 1000kPa. Performance: 400 Mains

350

Pump

300 250 HEAD (M) 200

150 100 50 0 0

100

150

FLOW (LPM)

200

300

250

Min 100mm

Note: Do not adjust factory setting.

Household Mains Cable Tie

70mm above suction

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

272

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

500 Series& Blazemaster - Loncin Engine MiniBlaze

ONGA PUMPS

500 SERIES Model

543

Part No.

Volts

Amps

Code

List Price

225-354300

1.1

230

6.4

$1385.00

Horizontal, single-stage, surface mounted centrifugal pump. Jet and venturi assisted performance with closed impeller for pumping debris free water. Noryl pump casing with 1¼ “ BSP (male) inlet and ¾“ BSP (female) outlet. Suitable for pumping clean non-aggressive liquids without solids or fibres in suspension. Features:

■

Industrial grade corrosion resistant thermoplastic. No moving parts down bore. Built-in-check valve. Shallow well lifts to 7.6m. Manual or automatic system. Max head 41m.

■

Max flow 118lpm.

■ ■ ■ ■ ■

Applications: ■ Domestic, industrial or rural pressure pump for use as a manual or an automatic pressure system. ■ Stock watering, irrigation and water transfer. ■ Option of a large range of water sources including tanks, bores, dams, creeks and rivers.

45 40 35 30 25 20 15 10 5 0

100

110

120

PUMP CONSTRUCTION MATERIALS Components

Pump casing End shield

Material

Noryl Cast iron

Baffle

Noryl

Priming/drain plug

Acetal

Impeller

Polycarb 20% glass filled

Diffuser

Noryl

Shaft sleeve

Nylon

Motor shaft

Mild steel

O-ring’s Mechanical seal

Nitrile Carbon/ceramic

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

273

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

JJ Series & Blazemaster - Loncin Engine MiniBlaze

PENTAIR PUMPS

ONGA FARMMASTER JJ SERIES – SHALLOW WELL PRESSURE SYSTEM* *INCLUDES PUMP AND PRESSURE SWITCH (DOES NOT INCLUDE INJECTOR/HOUSING & TANK, SEE NEXT PAGE)

Model No.

Part No.

Voltage

Amps

Code

List price

JJ400

225-110031

0.75

240

4.6

$959.00

JJ600

225-110021

1.1

240

7.7

$1386.00

JJ600 3ph

225-110044

1.1

400

2.92

$1422.00

■ ■

■

The Farmmaster Junior Jet “JJ” range are compact and efficient pumps. Constructed in cast iron with precision moulded hydraulic components, they are built for many years of hard work. For those looking for a household pump for the largest homes, the JJ400 or JJ600 can provide strong pressure throughout.

APPLICATIONS ■ Stock watering, irrigation and water transfer from dams, creeks, wells and bores.

JJ400 Performance

Model Injector (Watts) Model

Pressure Switch Setting (kPa)

S500 140-280#

JJ400

S501

S502

210-350

280-420

Suction Lift (M)

0 3 6 7.6 0 3 6 7.6 0 3 6 7.6

JJ600 Performance

Discharge Head 15 21 Capacity 98 70 78 56 56 40 39 28 71 66 57 53 40 38 28 26 47 38 27 19

(Metres)

27 34 40 46

(Litres per Minute)

40 32 23 16 42 34 24 17 42 34 24 17

Maximum Pump Pressure (kPa)

21 17 12 8 24 14 19 11 14 8 10 6

Model Injector (Watts) Model

380 350 320 305 440 410 380 365 505 475 445 430

Pressure Switch Setting (kPa)

S600 140-280#

S601

210-350

JJ600 S602

280-420

S603

350-560

Suction Lift (M)

0 3 6 7.6 0 3 6 7.6 0 3 6 7.6 0 3 6 7.6

Discharge Head 15 21 Capacity 137 112 109 89 78 64 55 45 125 100 71 50

112 89 64 45 100 80 57 40

(Metres)

27 34 40 46

(Litres per Minute)

71 24 57 40 28 74 59 42 29 82 66 47 33 62 50 35 25

33 26

51 41 29 20 48 38 27 19

29 23 16 12 34 22 27 18 19 12 14 9

Maximum Pump Pressure (kPa)

375 345 315 300 410 380 350 335 505 475 445 440 615 585 555 540

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

274

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PENTAIR PUMPS

JJ Series & Blazemaster - Loncin Engine MiniBlaze

SHALLOW WELL INJECTOR & HOUSING ONLY - TO SUIT JJ SERIES Model No.

Part No.

Code

List Price

S500

345-110445

$153.00

S501

345-110446

$153.00

S502

345-110447

$153.00

JJ400

JJ600 S600

345-110448

$153.00

S601

345-110449

$153.00

S602

345-110450

$153.00

S603

345-110451

$153.00

INCLUDES: ■ Housing. ■ Gasket. ■ Jet. ■ Venturi.

To make up complete JJ shallow well set you need:

JJ400 or JJ600 pump 1Ph or 3Ph

Shallow well injector & Housing from table above

Pressure tank (18-24 Ltr.)

Pressure Tanks see pg 280/417

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

275

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Onga Farmmaster OJ Series MiniBlaze & Blazemaster - Loncin Engine

PENTAIR PUMPS

ONGA FARMMASTER OJ SERIES – SHALLOW WELL *INCLUDES PUMP AND PRESSURE SWITCH/GAUGE (INJECTOR AND HOUSING SUPPLIED SEPARATELY, SEE NEXT PAGE)

Model No.

Part No.

Voltage

Amps

Code

List Price

OJ700 1ph

110144

1.5

240

8.9

$1971.00

OJ700 3ph

110119

1.5

400

3.57

$2023.00

OJ800 1ph

110121

2.8

240/480

14/7.0

$2945.00

OJ800 3ph

110124

3.0

400

5.5

$3023.00

■

■ ■ ■

The Farmmaster OJ range is the flagship of the Onga range, offering performance, efficiency and reliability in a solid cast iron casing. The bottle shaped casing allows easy escape for air and aids the pump in priming suction lines Stock watering, irrigation and water transfer from dams, creeks, wells and bores. For domestic, industrial or rural use as a manual or an automatic pressure system, stock watering, irrigation and water transfer. Options of a large range of water sources including tanks, bores, dams, creeks and rivers thanks to various injector combinations.

Model

OJ700

Model

Injector Model

S700

210-350#

S701

280-455

S702

350-560

S703*

420-630

S704*

490-700

Injector Model

Pressure Switch Setting (kPa)

Suction Lift (M)

0 3 6 7.6 0 3 6 7.6 0 3 6 7.6 0 3 6 7.6 0 3 6 7.6

Suction Lift (M)

0 3 6 7.6 SSHP Range Performance 0 3 S801 280-455 6 7.6 0 3 S802 350-560 6 7.6 0 3 S803* 420-630 6 7.6 0 3 S804* 490-700 6 7.6 0 3 S805* 630-840 6 7.6 0 3 S806** 770-1050 6 7.6 S800

OJ800

Pressure Switch Setting (kPa)

210-350#

Discharge Head 15

162 130 92 65

159 127 91 64

138 110 79 55 114 91 65 46

80 64 46 32 94 75 54 38 85 68 48 34

61 49 35 24 66 53 38 26 69 55 39 28 56 45 32 22

31 25 18 12 42 34 24 17 50 40 29 20 51 41 29 20

24 19 14 10 35 28 20 14 39 31 22 16

Discharge Head 15

245 196 140 98

241 193 137 96 215 172 123 86

218 174 124 87 204 163 116 82 154 123 88 62

156 125 89 62 160 128 91 64 150 120 86 60

116 93 66 46 117 94 67 47 112 90 64 45

(Metres)

46 52 58 64 Capacity (Litres per Minute)

22 18 13 9 28 22 16 11

18 14 10 7

430 400 370 355 540 510 480 465 635 605 575 560 690 660 630 615 800 770 740 725

11 9

(Metres)

46 52 58 64 Capacity (Litres per Minute)

66 53

85 68 48 34 88 70 50 35 90 72 51 36

54 43 31 22 64 51 36 26 67 54 38 27 70 56 40 28

25 20

42 34 24 17 47 38 27 19 57 46 32 23

25 20 14 10 31 24 18 12 43 34 25 17

18 14 10 7 31 25 18 12 34 27 19 14

Maximum Pump Pressure (kPa)

21 17 12 8 33 26 18 13

30 24 17 12

25 20 14 10

18 14 10 7

KEY FEATURES ■ Injectors to suit large range of applications ■ Offset combinations available ■ No moving parts down bore ■ Shallow well lifts to 7.6 m ■ Deep well lifts to 49 m ■ Manual or automatic system ■ Max. head – 123 m. ■ Max. flow – 255 lpm

Maximum Pump Pressure (kPa)

430 400 370 355 525 495 465 450 635 605 575 560 730 700 670 655 800 770 740 725 970 880 850 835 1145 1115 1085 1070

* Pressure switch adjustment needed. ** 700248 pressure switch needed for extra high pressure switching. *Terms and conditions apply.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

276

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Onga Farmmaster OJ Series MiniBlaze & Blazemaster - Loncin Engine

PENTAIR PUMPS

OJ800 Performance

OJ700 Performance

SHALLOW WELL INJECTOR & HOUSING ONLY - TO SUIT OJ SERIES Model No.

Part No.

Code

List Price

$153.00

OJ700

S700

345-110471

S701

345-110472

$153.00

S702

345-110473

$153.00

S703

345-110474

$153.00

S704

345-110475

$153.00

OJ800

S800

345-110476

$153.00

S801

345-110477

$153.00

S802

345-110478

$153.00

S803

345-110479

$153.00

S804

345-110480

$153.00

S805

345-110481

$153.00

S806

345-110482

$153.00

INCLUDES ■ Housing. ■ Gasket. ■ Jet. ■ Venturi.

To make up complete OJ shallow well set you need:

OJ700 or 800 pump 1Ph or 3Ph

Shallow well injector & Housing from table above

Pressure tank (36+ Ltr.)

Pressure Tanks see pgs 280/417 Minimum tank size for OJ700 – 36L

Minimum tank size for OJ800 – 75L

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

277

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PENTAIR PUMPS

JJ/OJ Series Deep Well - Loncin Engine MiniBlaze & Blazemaster

ONGA FARMMASTER JJ & OJ SERIES – DEEP WELL PRESSURE SYSTEM ■■ JJ & OJ pumps equipped with deep well injectors can handle suction lifts down to 49 metres (37m for JJ series). ■■ For all these pumps an offset flange can be used in place of the over-bore elbows. This allows you to draw water from a river or other water service while the pump can be placed well above the flood line. ■■ You get all the benefits of drawing water while still having an above ground, easily serviceable pump. APPLICATIONS ■■ Tank filling, irrigation and sprinklers, stock water and household water supply. DEEP WELL INJECTOR KITS TO SUIT JJ PUMPS Kit Set Code Elbow/Over-Bore Type

Kit Set Code Offset Flange Type

Suit Pump Model

Minimum Tank Size

Code

List Price

D411-E D511-E D521-E D413-E D417-E D513-E D523-E D620-E

D411-O D511-O D521-O D413-O D417-O D513-O D523-O D620-O

JJ400 JJ400 JJ400 JJ600 JJ600 JJ600 JJ600 JJ600

24 Litre 24 Litre 24 Litre 24 Litre 24 Litre 24 Litre 24 Litre 24 Litre

W W W W W W W W

$431.00 $469.00 $469.00 $431.00 $431.00 $469.00 $469.00 $562.00

D414-E D415-E D514-E D515-E D516-E D611-E D612-E D613-E D518-E D519-E D520-E D616-E D617-E D618-E D619-E

D414-O D415-O D514-O D515-O D516-O D611-O D612-O D613-O D518-O D519-O D520-O D616-O D617-O D618-O D619-O

W W W W W W W W W W W W W W W

$431.00 $431.00 $469.00 $469.00 $469.00 $562.00 $562.00 $562.00 $469.00 $469.00 $469.00 $562.00 $562.00 $562.00 $562.00

Deep Well Injector Kits to Suit OJ Pumps

OJ700 OJ700 OJ700 OJ700 OJ700 OJ700 OJ700 OJ700 OJ800 OJ800 OJ800 OJ800 OJ800 OJ800 OJ800

35 Litre 35 Litre 35 Litre 35 Litre 35 Litre 35 Litre 35 Litre 35 Litre 75 Litre 75 Litre 75 Litre 75 Litre 75 Litre 75 Litre 75 Litre

To make up complete Deep well set you need:

JJ400/600 or OJ700/800 (Choose from previous pages)

Deep well injector kit from table above Offset or Elbow (see next page)

Pressure tank See minimum recommended size above

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

278

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

JJ/OJ Series Deep Well - Loncin Engine MiniBlaze & Blazemaster

PENTAIR PUMPS JJ and OJ Deep Well performance chart Model

Pressure Switch Setting

JJ400 140-280

Injector Size (Inch)

3 1/4 3 3/8 3 1/4

JJ600 140-280

3 3/8 #4 3/8

Model

Pressure Switch Setting

Injector Size (Inch)

3 1/4 3 3/8 OJ700 210-350 #4 /8 3

3 3/8 210-350* OJ800 or 280-420

#4 3/8

Max Minimum Injector Pump Operating Model Pressure Pressure (kPa) (kPa)

D411 D521 D511 D417 D413 D523 D513 D620

400 400 385 410 430 414 400 500

95 100 100 140 140 160 165 124

Bore Water Pumping Level or Suction Lift (Metres) 6

60 75

45 65

35 50

25 40

100 85

Max Minimum Injector Pump Operating Model Pressure Pressure (kPa) (kPa)

D414 D415 D514 D515 D516 D611 D612 D613 D520 D518 D519 D618 D619 D616 D617

455 483 469 483 455 462 483 518 573 690 656 517 600 711 662

DEEP WELL OFFSET Deep Well offset table

186 186 179 193 193 179 186 193 248 262 262 214 242 276 276

30 47

18 21 24 27 30 34 Capacity (Litres per Minute) 18 25

40 45

30 40

20 33

15 25

1 1/4" 1 1/2" 1 1/2" 1 1/4" 1 1/4" 1 1/2" 1 1/2" 2"

Bore Water Pumping Level or Suction Lift (Metres) 6

120 105 75

135 120 113

18 21 24 27 30 34 37 Capapcity (Litres per Minute)

40 63

160 135 113

50 48

90 68

85 63

205 173 150 125 100 85 68

Suction Pressure Pipe Pipe

1" 1 1/4" 1 1/4" 1" 1" 1 1/4" 1 1/4" 1 1/2"

Suction Pressure Pipe Pipe 1 1/4" 1 1/4" 1 1/2" 1 1/2" 1 1/2" 2" 2" 2" 1 1/2" 1 1/2" 1 1/2" 2" 2" 2" 2"

1" 1" 1 1/4" 1 1/4" 1 1/4" 1 1/2" 1 1/2" 1 1/2" 1 1/4" 1 1/4" 1 1/4" 1 1/2" 1 1/2" 1 1/2" 1 1/2"

TABLE

DEEP WELL INJECTOR PARTS & ACCESSORIES Part No.

345-500100 345-502860 345-800492 345-800493 345-800494 345-800401 345-800576 345-800577 345-800578

Model

Description

Code

List Price

D4 D5 D6 D6 4” D4 D5 D6

Offset flange Over bore elbow Housing & Elbow kit Housing & Elbow kit Housing & Elbow kit Housing & Elbow kit Housing & Offset kit Housing & Offset kit Housing & Offset kit

W W W W W W W W W

$107.00 $107.00 $358.00 $396.00 $489.00 $489.00 $358.00 $396.00 $483.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

279

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Deep Well Injector Jet and Venturi MiniBlaze & Blazemaster - Loncin Engine Aquapack Pressure Tanks

PENTAIR PUMPS

DEEP WELL INJECTOR JET AND VENTURI Part No.

345-801042 345-801044 345-801045 345-801042 345-801132 345-801048 345-801050 345-801051 345-801052 345-801053 345-801052 345-801053 345-801115 345-801133 345-801134 345-801058 345-801059 345-801060 345-801063 345-801060 345-801116 345-801117 345-801050

Suits Injector

Jet

Venturi

D411 D413 D414 D415 D417 D511 D513 D514 D515 D516 D518 D519 D520 D521 D523 D611 D612 D613 D616 D617 D618 D619 D620

18 17 18 18 17 18 22 24 22 21 22 21 26 21 23 22 24 24 24 24 22 30 22

26 24 31 26 29 22 30 40 31 27 31 27 44 30 36 40 36 31 34 31 46 44 30

Code W W W W W W W W W W W W W W W W W W W W W W W

List Price $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00 $73.00

ONGA AQUAPACK PLUS STEEL PRESSURE TANKS Model

APP8 APP12 APP24 APP40 APP80 APP100

Part No.

Size

Max Pressure

Code

List Price

450-110491 450-110492 450-110493 450-110494 450-110495 450-110496

8L 12L 24L 40L 80L 100L

690kpa 690kpa 690kpa 690kpa 690kpa 690kpa

W W W W W W

$127.00 $153.00 $185.00 $423.00 $629.00 $706.00

■■ A comprehensive range of steel diaphragm pressure tanks designed to meet various water reservoir and energy saving needs. ■■ A durable and flexible diaphragm allows a consistent reservoir of water to be maintained during the life of the tank with minimal deformation. ■■ An integrated liner ensures water does not come into contact with the metal shell; minimising the chance of corrosion to the tank shell making its lifecycle longer and the water potable (CE & NSF certified for use in contact with drinking water). ■■ Air valve is conveniently situated on the upper side of the tank, allowing easy access for testing and adjusting the pre-charge air. ■■ Tank connections are stainless steel which are adaptable for either direct placement on the pump. ■■ or standalone units fitted independently to pipe work for versatile applications. ■■ The three larger models (APP40, APP80, APP100) are supplied with bases for ease of installation. APPLICATIONS ■■ Automatic controlled water supply. ONGA AQUAPACK STAINLESS Model

Part No.

Size

Max Pressure

Inlet

Diameter Height

Code

List Price

AP18S

450-ZA006450

800kpa

1”

226

280

$239.00

AP50S

450-ZA006540

24L

800kpa

¾”

272

430

$356.00

■■ Bromobutyl replaceable diagphram. ■■ 90OC max temperature. ■■ 304 Stainless.

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

280

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PENTAIR PUMPS

Prosource&Tanks MiniBlaze Blazemaster and OHPV - Loncin rangeEngine

PROSOURCE TANKS Model

Litre

Code

List Price

450‑APSC‑14‑4‑01

55L

$603.00

450‑APSC‑20‑6‑01

75L

$724.00

450‑APSC‑30‑9‑01

112L

$847.00

450‑APSC‑48‑14‑01

178L

$1277.00

450‑APSC‑60‑20‑01

227L

$1522.00

450‑APSC‑85‑25‑01

328L

$1765.00

450‑APSC‑119‑35‑01

453L

$2130.00

You simply can’t look past our comprehensive range of pressure tanks to meet a wide array of water reservoir and energy saving requirements. The Pro-Source Composite fibrewound tanks are the ultimate in reliability and durability especially for farm and industrial applications that require the ability to withstand the toughest conditions. Applications A range of sizes from 55 litres to 453 litres to suit most applications where a reservoir of pressurised water is required. Key Features PRO-Source composite fibrewound tanks designed and manufactured with capabilities to match a wide range of fresh water applications ■ PRO-Source composite tanks will not rust, corrode, dent or scratch and require no painting or exterior maintenance ■ NEW seamless durable air cell constructed of heavy gauge engineered polymer ■ NEW Drain screen field proven and unobtrusive design flush mounted to bottom of the tank ■ PRO-Source composite tanks are the choice for lasting and durability ■

5 year warranty

OHPV RANGE Part No.

Size

Description

Code

List Price

450-VP020

20L

Onga 16Bar High Pressure Tank 20L

$245.00

450-VP050

50L

Onga 16Bar High Pressure Tank 50L

$610.00

450-VP080

80L

Onga 16Bar High Pressure Tank 80L

$975.00

450-VP100

100L

Onga 16Bar High Pressure Tank 100L

$1220.00

450-VP200

200L

Onga 16Bar High Pressure Tank 200L

$1585.00

The Onga high pressure vessels are high in quality, and deliver high performance at high pressure. These tanks are also easier to upkeep especially when needing to remove and replace the bladder, which can be done without disassembly, saving cost on servicing. Available in a range of sizes suiting a wide variety of applications these can include: hydronic heating systems, water hammer arrestor systems and fire protection systems. Applications: Domestic, industrial or rural pressure systems, hydronic heating systems, water hammer arrestor systems, range of sizes to suit a wide variety of applications Features: Capabilities from 20 – 200 litres Durable membrane Max. pressure rating – 1600 kPa Replaceable cell Steel body with corrosion resistant coating Watermark approved

■ ■ ■ ■ ■ ■

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

281

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SeaBass MiniBlaze Series & Blazemaster - Loncin Engine

PENTAIR PUMPS

ONGA SEABASS SERIES Model

Part No.

Phase

Volts

Code

List Price

SEABASS 7

225-SB730100

1.0

0.75

230

$1730.00

SEABASS 9

225-SB930100

1.2

0.9

230

$1880.00

SEABASS 11

225-SB1100100

1.5

1.1

230

$1925.00

SEABASS 11

225-SB1108100

1.5

1.1

400

$1925.00

SEABASS 15

225-SB1500100

2.0

1.5

230

$2230.00

SEABASS 15

225-SB1508100

2.0

1.5

400

$2230.00

SEABASS 22

225-SB2201100

3.0

2.2

230

$2530.00

SEABASS 22

225-SB2208100

3.0

2.2

400

$2530.00

■ ■ ■ ■ ■ ■ ■

The ultimate aquaculture pump. The SeaBass range of pumps will reduce overall costs through efficiency and reliability. Salt water mechanical seal reduces the risk of seal failure and leaks. Stainless steel shaft for corrosion protection. Triple epoxy coated motor provides external corrosion protection. Continuously rated motor suited for more than 8 hours of operation per day. Tall pump stand protects your pump from corrosive standing water.

APPLICATIONS ■ Aquaculture. ■ Aquariums. Suction and discharge unions to suit 50mm UPVC pipe.

SeaBass Range Performance

Head (metres)

SeaBass 7 SeaBass 9

SeaBass 11 SeaBass 15

SeaBass 22

Model SEABASS 7 SEABASS 9 SEABASS 11 SEABASS 15 SEABASS 22

100

200

400 300 Flow (litres/minute)

500

600

700

kW (HP)

Voltage

Current (Amps)

.73 (1) .93 (1 1/4) 1.1 (1 1/4) 1.5 (2) 2.2 (3)

240 240 240 / 415 240 / 415 240 / 415

4.76 4.85 6.05 / 2.68 8.68 - 3.19 11.0 - 4.57

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

282

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

400 Series MiniBlaze & Blazemaster - Loncin Engine 14 Series

PENTAIR PUMPS

ONGA 400 SERIES Model

Part No.

413 414 415 417

Voltage

Amps

Code

List Price

225-341300

0.37

230

2.6

$399.00

225-341400

0.55

230

2.6

$491.00

225-341500

0.75

230

4.3

$678.00

225-341700

0.75

230

4.2

$722.00

The 400 series is constructed of high grade corrosion-resistant materials. Provides water flows up to 270 litres a minute or maximum pressure up to 26 metres. Model 413 is ideally suited to circulation duty in hydroponic greenhouses and water transfer. Casings are moulded out of strong ABS, making them suitable for the harshest of conditions.

■ ■ ■ ■

APPLICATIONS ■ High flow water transfer, light industrial and animal hygiene stations. ■ Salt water circulator. Inlet size: 413 - 1” 414/415/417 - 1¼” Outlet size: 413 - 1”, 414/415/417 - 1¼”

Hi-flo 400 Series Performance 30

417 416

415 414

Head (metres)

413

15 10 5 0

100 150 200 Flow (litres/minute)

250

300

ONGA 14 SERIES Model

142 142 143 143 ■ ■ ■ ■ ■

Part No.

Voltage

Amps

Code

List Price

225-314200 225-314230 225-314300 225-314330

1.5 1.5 2.4 2.4

240 400 240/480 400

9.6 3.2 14/7 5.2

O O O O

$1247.00 $1320.00 $1460.00 $1483.00

Flows of up to 500 litres per minute or heads over 40 metres are available from this range. Award winning Hi-Flo impeller means high pressure, high flow and great efficiency with lower operating cost. Moulded pump casing for corrosion resistance. Close coupled high efficiency TEFC motor makes it resistant to water ingress and vermin proof. Inbuilt thermal overload protects the motor from overheating.

APPLICATIONS ■ Suitable for high head water transfer, tank filling and irrigation. ■ 1 ½” male BSP Suction & Discharge

60 143 142

50 40

Head (metres)

30 20 10 0

*Terms and conditions apply.

200 Flow (litres/minute)

400

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

600

283

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

12 Series MiniBlaze & Blazemaster - Loncin Engine 15 Series

PENTAIR PUMPS

ONGA 112/252 SERIES Model

Part No.

Volts

Phase

Amps

Code

List Price

112

225-311200

1.1

230

7.2

$1082.00

112

225-311230

1.1

400

3.6

$1116.00

n n n n n n

Suited to those jobs where a compact & rugged water transfer pump is required. Moulded pump casing for corrosion resistance (model 112 only). Cast iron pump casing for durability (model 252 only). Close coupled high efficiency TEFC motor makes it resistant to water ingress and vermin proof. Inbuilt thermal overload protects the motor from overheating. Large priming/drainage ports for easy priming and draining.

112

Hi-Flo 112/252 Performance

APPLICATIONS n Water Transfer. n Tank Filling. n Irrigation.

30 112/252 25

112 Suction: 1 ¼” BSP male. Discharge: 1 ¼” BSP male.

252 Suction: 1 ¼” BSP Female. Discharge: 1 ¼” BSP Female.

Head (metres)

15 10 5 0

ONGA 12 SERIES - SELF PRIMING Model Part No. Hi-Flo

Model

112 252

100

250

150 200 Flow (litres/minute)

Voltage

350

300

Current (Amps)

Volts 1.1

Phase Amps 240/415

Code 7.2 -List 3.5Price

0.75

230 1.1

4.2 240/415

7.2 -$920.00 2.6

121

225-312100 Hi-Flo

122

225-312200

1.1

230

6.1

$1195.00

122

225-312203

1.1

400

2.6

$1291.00

150

225-315000

1.1

230

7.0

$1946.00

n n n

121

The self-priming versions of the 112 range are suitable for pumping liquids containing soft solids e.g. septic tank effluent, calf milk, grey water and many other applications. Surface mounted for easy servicing. Built in check valve, for excellent self-priming characteristics. Open impeller handles soft solids without clogging.

SUCTION & DISCHARGE 1 ½” Male BSP Suction. 1 ¼” Male BSP Discharge.

Hi-Flo Self Priming Range Performance 30 150 25

150

122 121

Head (metres)

15 10 5 0

100

*Terms and conditions apply.

Model

200 300 Flow (litres/minute)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

284

400

500

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz

Current (Amps)Website www.argondistributors.co.nz Current (Amps)

18 Series & Blazemaster - Loncin Engine MiniBlaze

PENTAIR PUMPS

ONGA 18 SERIES Model

Part No.

Phase

Volts

Amps

Code

List Price

182

225-318200

1.5

230

8.9

$1582.00

182

225-318230

1.5

400

3.9

$1706.00

183

225-318300

2.4

230/480

14/7

$2116.00

183

225-318330

2.4

400

5.5

$2055.00

184

225-318400

3.8

480

10.3

$2665.00

184

225-318430

3.8

400

7.5

$2466.00

185

225-318530

6.0

400

12.8

$3093.00

187

225-318700

2.4

230/460

14/7

$2562.00

187

225-318730

2.8

400

5.3

$2231.00

Models are available with maximum flows from 400 to over 1000 litres per minute. n Maximum pressures from 35 to more than 50 metres of head. n The 184 is now available with a 3.7kW single phase dual voltage motor for high pressure and flow. n Award winning Hi-Flo impeller means high pressure, high flow, great efficiency and lower operating cost. n Cast Iron casing for corrosion resistance. n Close coupled high efficiency TEFC motor makes it resistant to water ingress and vermin proof. n Inbuilt thermal overload protects the motor from overheating. APPLICATIONS n High flow water transfer and washdown. Suction & Discharge 2” Female BSP.

Hi-Flo 18 Series Performance 60

187

185 184

Head (metres)

183 182

30 20 10 0

200

400 600 Flow (litres/minute)

Model kW Voltage Hi-Flo 187 2.8 230 / 460 Hi-Flo 187 3.0 415 Hi-Flo 185 6.0 415 Hi-Flo 184 4.0 415 Hi-Flo 184 3.8 230 / 460 Hi-Flo 184 4.0 415 Hi-Flo 183 2.8 230 / 460 *Terms and conditions apply. Hi-Flo 183 3.0 415 Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website. Hi-Flo 182 1.8 230

800

1000

Current (Amps) 14 / 7 5.3 12.8 7.5 20.6 / 10.3 7.5 14 / 7 5.5 Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz 285 Website www.argondistributors.co.nz 8.9

SSS Series MiniBlaze & Blazemaster - Loncin Engine

ONGA PUMPS

ONGA SSS SERIES Part No.

Phase

Volts

Amps

Code

List Price

225-SSS702

0.75

0.55

230

4.0

$540.00

225-SSS2102

1.5

1.1

230

6.0

$681.00

225-SSS2103

2.0

1.5

230

8.5

$723.00

225-SSS3703

3.0

2.2

230

12.0

$817.00

Designed by Pentair with the highest quality, performance and eficiency standards, the SSS range of stainelss steel pressure pumps are suitable for a range of Agricultural, Commercial and Industrial applications. n n n n n n n n

Easy installation and operation. Nominal speed 2900rpm. IP X4. Insulation class F. Frequency 50Hz. Bearing type NSK. Maximum working pressure 10Bar. Liquid temp. range 85ºC, Max ambient temp. 55ºC.

Applications: n Agricultural. n Commercial. n Industrial. n Irrigation. n Water Transfer. n Wash Down. Construction Material: n Pump Casing: 304SS. n Impeller: 304SS. n Motor Shaft: 304SS. n O-ring - pump casing: Nitrile. 40 35 30

SSS702 SSS2103

25 HEAD (M) 20

SSS3703

SSS2102

15 10 5 0 0

100 150 200 250 300

FLOW (LPM)

350

400 450

500 550 600

DIMENSIONS AND SPECIFICATIONS Model

DN1

DN2

SSS702

332

210

224

119

149

110

SSS2102

440

210

250

129

149

110

11/2

11/4

SSS2103

440

210

250

129

149

110

11/2

11/4

SSS3703

440

210

250

129

149

110

11/4

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

286

1/4

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PENTAIR PUMPS

Southern & Blazemaster ISO End -Suction Loncin Engine pump MiniBlaze Cross

Please contact Argon Distributors for selection, price and availability Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

287

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Mini Blaze MiniBlaze & Blazemaster - Loncin Engine GP960 High Volume Engine Drive

ONGA PUMPS

ONGA MINI BLAZE Model

MB25L MB25LK ■ ■ ■ ■ ■

Part No.

225-MB25L

2.5

225-MB25LK

2.5

Option

Complete kit

Code

List Price

$440.00

$581.00

The MiniBlaze is equally at home providing plumbers and tradesman to evacuate water form work sites. From the handyman to river camp sites, the versatility for application of the MiniBlaze is endless. Coupled to the powerful loncin 2.5hp 4 stroke engine. Open face cast iron impeller. 25mm Inlet/Outlet.

MiniBlaze Performance

40 35

Full Throttle

Head (metres)

3600 rpm

25 20 15 10 5 0 0

100

150

200

250

Flow (litres/minute)

ONGA GP960 -3” HIGH VOLUME ENGINE DRIVE PUMPS – BRIGGS & STRATTON Model

GP960 ■ ■

■ ■ ■ ■

■

Part No.

225-333315

6.0

Option

Code

List Price

$1725.00

The GP960 is a high volume 3”pump that can deliver more than 900 litres per minute. Driven by the powerful and reliable Briggs & Stratton 6.0hp engine, it is the perfect choice for quick fill or rapid water transfer requirements. Rotatable discharge port makes it adaptable to your situation. Cast iron open impeller providing excellent priming ability. Built-in non-return valve aids quick priming. Many of these units find homes on water tankers or moving water from A to B in industrial and agricultural applications. Supplied with 3” nylon nuts and tails for hose connection.

GP960 Performance 30

Full speed performance

Extended duty curve

Head (metres)

20 15 10 5 0

200

400 600 Flow (litres/minute)

800

1000

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

288

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PENTAIR PUMPS

Onga LCT65VR & Blazemaster - Loncin Engine MiniBlaze

ONGA LCT65VR Model

Part No.

Code

List Price

LCT65VR

225‑LCT65VR

6.5

$1173.00

The NEW LCT65VR is an excellent pump for versatile use, perfect for high capacity water and chemical transfer, in addition to pumping corrosive *chemicals. With 2” suction and discharge ports the LCT65VR allows for flows up to 750 lpm, and is powered by a reliable Loncin 6.5HP EPA lll engine. Lightweight and easy to handle, this pump functions very economically and is fitted with a roll frame for stability and ease of transportation. Applications Water transfer n Chemical transfer n Liquid fertilizer transfe n Tank filling n Flood water removal n

* If pumping chemicals check chemical compatibility with Viton seals Key Features n Viton seals n 2” Camlock suction and discharge fittings n Heavy duty roll frame n Max Flow: 750 L/min n Max head: 40m n Max suction: 6m n Max. pressure 400kPa n 6.5 hp Loncin engine with oil sensor

ONGA ROLL FRAME Model

Part No.

Dimensions

Code

List Price

Small

345-801372K

5-6

L620 x W520 x H500

$230.00

Large

345-801373K

8-10

L620 x W640 x H560

$310.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

289

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Blazemaster - Briggs & Stratton MiniBlaze & Blazemaster - Loncin Engine

PENTAIR PUMPS

ONGA BLAZEMASTER – SINGLE STAGE – BRIGGS & STRATTON Model

Part No.

225-B55BS

5.0

225-B55BSR

5.0

B55BS B55BSR B65BS B65BSR

225-B65BS

6.0

225-B65BSR

6.0

Option

With Roll frame With Roll frame

Code

List Price

$1200.00

$1320.00

$1315.00

$1435.00

Code

List Price

$1330.00

$1450.00

ONGA BLAZEMASTER – DUAL STAGE – BRIGGS & STRATTON Model

BM55BS BM55BSR BM65BS

Part No.

225-BM55BS

5.0

225-BM55BSR

5.0

Option

With Roll frame

225-BM65BS

6.0

$1415.00

BM65BSR

225-BM65BSR

6.0

With Roll frame

$1535.00

BM65BSE

225-BM65BSE

6.0

Electric start

$2045.00

n n n n

The Blazemaster is a single-stage pump designed to move more water, more economically. An all-purpose workhorse suited for many applications. Inbuilt non-return valve. Cast aluminum construction means strength, durability and light weight portability.

APPLICATIONS n Applications include firefighting, tank filling, water transfer, boom spraying, irrigation and travelling irrigators.

PERFORMANCE CURVE Single impeller

70.0

110.0

60.0

100.0 90.0

HEAD (Metres)

50.0 40.0 30.0

80.0 70.0 60.0 50.0 40.0

20.0

30.0 20.0

10.0 0.0

Twin impeller

120.0

10.0 0

100

200

300

400

500

600

700

800

0.0

FLOW (litres/minute)

100 150 200 250 300 350 400 450

FLOW (litres/minute)

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

290

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Blazemaster - Honda MiniBlaze & Blazemaster - Loncin Engine

PENTAIR PUMPS

ONGA BLAZEMASTER – SINGLE STAGE – HONDA Model

B55H B55HR B65H B65HR B90H

Part No.

225‑B55H

5.5

225‑B55HR

5.5

225‑B65H

6.5

225‑B65HR

6.5

225‑B90H

9.0

Option

With Roll frame With Roll frame

Code

List Price

$1435.00

$1555.00

$1535.00

$1655.00

$2940.00

Code

List Price

$1595.00

$1715.00

$13705.00

ONGA BLAZEMASTER – DUAL STAGE – HONDA Model

BM55H BM55HR BM65H BM65HR BM90H BM90HE

Part No.

225-BM55H

5.0

225-BM55HR

5.0

225-BM65H

6.0

225-BM65HR

6.0

225-BM90H

9.0

225-BM90HE

9.0

Option

With Roll frame With Roll frame Electric start

$1825.00

$3050.00

$3500.00

n The Blazemaster Twin is a Dual-stage pump designed to give you more pressure while delivering more water. n Suited for many applications, particularly high head tank filling and irrigation & Fire Fighting. n Inbuilt non-return valve. n Cast aluminum construction means strength, durability and light weight portability.

APPLICATIONS n Applications include firefighting, tank filling, water transfer, boom spraying, irrigation and travelling irrigators.

Single Impeller

Twin Impeller 120

110

100 90 80

HEAD (Metres)

30 20

60 50 40 30 20

10 0

100

200

300

400

500

600

700

800

FLOW (litres/minute)

0 100 150 200 250 300 350 400 450 500

FLOW (litres/minute)

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

291

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

ONGA BLAZEMASTER – SINGLE STAGE – YANMAR ENGINE Model

Part No.

B48Y

225-B48Y

B70Y

225-B70Y

Option

Code

List Price

4.8(LAE48)

$4270.00

7.0(LAE70)

$5715.00

B70YE

225-B70YE

7.0(LAE70)

Electric start

$6515.00

B10YE

225-B10YE

10.0(LAE100)

Electric start

$6985.00

The Blazemaster pumps can be supplied with Yanmar diesel engines; these engines have great reputations for performance and reliability which together make an impressive piece of equipment that is guaranteed for years of service and economical operation. Blazemaster pumps have been specifically power matched to ensure compatibility and reliability under pressure.

BLAZEMASTER – DUAL STAGE – YANMAR ENGINE Model

BM70YE

Part No.

Option

Code

List Price

225-BM70Y

7.0(LAE70)

Electric start

$6675.00

BM70YER

225-BM70YE

7.0(LAE70)

Roll Frame Electric start

$6695.00

BM10YE

225-BM10YE

10.0(LAE100)

Electric start

$7425.00

Blazemaster Performance (Diesel engines) 70

Blazemaster Twin Performance (Diesel engines) 120

B10YE / B70Y

60 50

Head (metres)

30 20

Continuous Duty Only operate Engine at 3000 rpm for continuous duty applications.

10 0

Excludes Engine 60 (Manufacturer warranty details in the 50 handbook)

500

BM10YE / BM70Y

100

B48Y

Blazemaster Performance (Diese

Diesel Power

100 200 Flow (litres/minute)

300

400

500

600

Head (metres)

M70Y

40 Continuous Duty Only operate Engine at 3000 rpm for continuous duty applications.

20 0

700

100

150

200 250 300 Flow (litres/minute)

350

400

450

30 20

Continuous Duty Only operate Engine at 3000 rpm for continuous duty applications.

10 0

500

100 200 Flow (litres/minute)

ONGA ENGINE DRIVEN OJ FARMMASTER PUMPS Model

Part No.

Option

Code

List Price

OJ700E

225-110075

6.0

Honda GX160

$1885.00

OJ800E

225-110160

8.0

Honda GX270

$2575.00

OJ800ES

225-110161

8.0

Honda Electric start

$3675.00

■

■ ■

When your property needs a serious jet-assisted pump independent of electrical supply, only cast iron is good enough. Other materials just won’t stand up to the extreme pressures common in engine driven jet pumps. Combining the best jet pumps available with the most reliable engines produces the Onga OJ700E and OJ800E. A jet pump gives you the flexibility to draw water from any source, and engine drives give you the ability to locate it anywhere. You can also rest assured that if your water supply changes, your OJ can change along with it — with over 40 injector combinations for the Onga Farmmaster range, there’s a set-up to suit almost any application. (See page 264 for injectors).

OJ700 Performance 4000W

3800rpm 3500rpm 3400rpm 3200rpm 3000rpm 2800rpm

1200W

Head (metres)

1500W

30 20

6500W

7000W

2000W

1500W

3800rpm 3500rpm 3400rpm 3200rpm 3000rpm 2800rpm

30 20 10

10 0

5500W 6000W

2500W

2000W

5000W

3300W

2500W

3500W

4500W

3300W

4000W4500W

3500W

OJ800 Performance

100

Head (metres)

Blazemaster - Yanmar Engine MiniBlaze & Blazemaster - Loncin Engine OJ Engine Driven

PENTAIR PUMPS

*Terms and conditions apply.

100

150

200 Flow (litres/minute)

250

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

292

100

150 200 Flow (litres/minute)

250

300

250

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

300

400

Signature Borehole- Pumps MiniBlaze 2000 & Blazemaster Loncin Engine

PENTAIR PUMPS

STA-RITE SIGNATURE 2000 BORE PUMP WET END Model

Part No.

Stages

Discharge

Code

List Price

$750.00

20 Litre

20S4CTL

245-20S4CTL-04

0.5

0.37

1¼”

20S4DTL

245-20S4DTL-04

0.75

0.55

1¼”

$895.00

20S4ETL

245-20S4ETL-04

1.0

0.75

1¼”

$1115.00

30S4DT

245-30S4DT-05

0.75

0.55

1¼”

$760.00

30S4ET

245-30S4ET-05

1.0

0.75

1¼”

$915.00

30S4FT

245-30S4FT-05

1.5

1.1

1¼”

$1175.00

5L15P4DH

245-5L15P4DH-04

0.75

0.55

1¼”

$560.00

5L15P4EH

245-5L15P4EH-04

1.0

0.75

1¼”

$635.00

5L15P4FH

245-5L15P4FH-04

1.5

1.1

1¼”

$72500

5L15P4GH

245-5L15P4GH-04

2.0

1.5

1¼”

$915.00

30 Litre

WET END ONLY

50 Litre

70 Litre

5L20P4EH

245-5L20P4EH-04

1.0

0.75

2”

$725.00

5L20P4FH

245-5L20P4FH-04

1.5

1.1

2”

$810.00

5L20P4GH

245-5L20P4GH-04

2.0

1.5

2”

$910.00

5L20P4HH

245-5L20P4HH-04

3.0

2.2

2”

$1400.00

90 Litre

5L30P4FH

245-5L30P4FH-04

1.5

1.1

2”

$735.00

5L30P4GH

245-5L30P4GH-04

2.0

1.5

2”

$945.00

5L30P4HH

245-5L30P4HH-04

3.0

2.2

2”

$1220.00

5L30P4JH

245-5L30P4JH-04

5.0

3.7

2”

$2675.00

5L50P4GH

245-5L50P4GH-04

2.0

1.5

2”

$1150.00

5L50P4HH

245-5L50P4HH-04

3.0

2.2

2”

$1650.00

5L50P4JH

245-5L50P4JH-04

5.0

3.7

2”

$1850.00

5L50P4KH

245-5L50P4KH-04

7.5

5.5

2”

$2250.00

Stages

Code

List Price

150 Litre

■■ The impeller stack is of a floating design, so that individual impellers can move vertically to allow small solids to pass through, rather than locking up the pump. ■■ Large hexagonal shaft transmits power without wear or flex. ■■ Heavy gauge outer shell makes it strong, rigid and long lasting. ■■ Superior ceramic wear surface reduces problems running in sandy or abrasive water. ■■ Floating impeller design reduces sand lock up problems and ensures a longer motor life and trouble free operation. APPLICATIONS ■■ Irrigation, water transfer and stock watering.

STA-RITE HIGHFLOW 4” SUBMERSIBLE BOREHOLE PUMPS Model

Part No.

kW 250 Litre

L90HF520

245-L90HF520

2.0

1.5

$1350.00

L90HF530

245-L90HF530

3.0

2.2

$1575.00

L90HF550

245-L90HF550

5.0

3.7

$2250.00

L90HF575

245-L90HF575

7.5

5.5

$2525.00 WET END ONLY

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

293

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Signature Borehole- Pumps MiniBlaze 2000 & Blazemaster Loncin Engine

PENTAIR PUMPS JP SERIES

JP SERIES

20 LITRES/MIN

30 LITRES/MIN

Recommended Operating Range

200

20S4 S4TL S4 20S4 S4TL S4 20S SC S4 4TL

Head (metres)

200

100

20 30 Flow (20 litres per minute)

Rd Recommended d Operating Range

30S4FT S 30S4ET S 30S S4DT S

100

HS SERIES

50 LITRES/MIN

30 45 Flow (30 litres per minute)

70 LITRES/MIN

90 LITRES/MIN

150 LITRES/MIN

HighFlow Performance

Recommended Operating Range

250 Litre Pump Glass reinforced engineering plastic ends for corrosion protection. Discharge 1 1/4” BSP. are excluding GST and may change without notice. A

Prices shown HP and updates kW visit website. Stages Model amendments E&OE. For catalogue L90HF575 L90HF550

7.5 5.0

5.5 3.7

23 18

freight charge may also apply.

294

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Franklin Bore Pump Motor- Loncin - 4” MiniBlaze & Blazemaster Engine

PENTAIR PUMPS

FRANKLIN 4” SUBMERSIBLE BOREHOLE PUMP MOTORS Part No.

Type

Volts

Code

List Price

245-701886

0.37

0.5

2 wire

230

$895.00

245-701887

0.56

0.75

2 wire

230

$975.00

245-701896

0.75

1.0

2 wire

230

$1075.00

245-701897

1.1

1.5

2 wire

230

$1325.00

245-701891

0.75

1.0

3 wire

230

$895.00

245-701888

1.12

1.5

3 wire

230

$1095.00

245-701884

1.5

2.0

3 wire

230

$1550.00

245-701890

2.2

3.0

3 wire

230

$1685.00

245-701885

0.75

1.0

3 phase

400

$855.00

245-701892

1.12

1.5

3 phase

400

$940.00

245-701893

1.5

2.0

3 phase

400

$1180.00

245-701894

2.2

3.0

3 phase

400

$1425.00

245-701877

3.0

4.0

3 phase

400

$1735.00

245-701895

3.7

5.0

3 phase

400

$1995.00

245-701878

4.0

5.5

3 phase

400

$2225.00

245-701902

5.6

7.7

3 phase

400

$2375.00

245-701879

7.5

10.0

3 phase

400

$3745.00

Franklin Electric 4-inch Submersible Encapsulated Motors are manufactured in ISO 9001 certified facilities. These motors are built for operation in 4-inch diameter or larger water wells. They are fitted with water lubricated radial and thrust bearings for maintenance-free operation. A special diaphragm ensures pressure compensation inside the motor. The 2-wire type version is a split phase motor with built in starting components, automatic reset overload and surge protectors designed for direct connection to the single-phase power supply with no need for external controls. The 3 wire type motor is a single phase motor for operation with externally mounted control box which houses the start and run capacitors ,start relay and motor overload protection. FRANKLIN MOTOR CONTROL BOX FOR 3 WIRE MOTORS Part No.

Model

Type

Code

245-700797

280 3730 119

245-700798

282 3608 119

245-700800 245-700802

List Price

0.75

CSR

$220.00

1.12

CSCR

$290.00

282 3618 119

1.5

CSCR

$470.00

282 3628 110

2.2

CSCR

$595.00

Other Franklin 4”, 6” and 8” motors available on request – please enquire

PLEASE SEE BORE PUMP SECTION FOR MORE OPTIONS *Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

295

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

VF150 Submersible MiniBlaze & Blazemaster - Loncin Engine Dominator Submersible

PENTAIR PUMPS

ONGA VF SUBMERSIBLE PUMP Model

VF150

Part No.

kW (P1)

Volts

Amps

Code

List price

245-VF150

0.18

230

1.75

$350.00

The VF150 sump pump is designed for clean water or water containing some soft solids, typical applications are dewatering pits, drainage, water features and grey water. ■ Polycarbonate impeller. ■ Cast iron pump housing. ■ Dual carbon ceramic seal. ■ 1 ¼” discharge. ■ Soft solids up to 15mm.

VF150 Performance 7

Head (metres)

100

120

140

Flow (litres/minute)

DOMINATOR Model

Part No.

Amps

Code

List Price

Dominator 75/35

245-D7535

0.6

2.7

$885.00

Dominator 75/56

245-D7556

0.75

3.8

$1095.00

Dominator 115/57

245-D11557

1.1

5.0

$1350.00

■ ■ ■ ■ ■ ■ ■ ■

Submerged in the supply tank or well, the Dominator makes a completely silent water pressure system. Sharing its pump components with the highly respected Sta-Rite Signature 2000 submersible borehole pump range. When Coupled with an electronic pressure control the Dominator becomes a complete home pressure system. High efficiency moulded impellers means lower running costs and high performance. Stainless steel suction, shaft and casing makes this pump corrosion resistant and tough. Supplied with 20m cable and 20m drop cord. Mechanical seal with oil chamber.

APPLICATIONS ■ The perfect household pressure pump or water supply/tank filling. ■ Coupled with electronic pressure control, these pumps give you a fantastic shower. ■ Installed directly into well or bore (minimum diameter 4” ID). Discharge: 1 ¼”. Maximum water temperature: 40c. Integrated Check Valve.

Dominator Performance

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

296

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Drenox and Biox Series MiniBlaze & Blazemaster - Loncin Engine Submersible Pumps

PENTAIR PUMPS

DRENOX SERIES – DRAINAGE PUMP FOR CLEAR WATER Model

Part No.

Volts

Code

List Price

Drenox 80/7

245-P1031020

0.20

230

$570.00

Drenox 250/10

245-P1031400

0.55

230

$807.00

Omnia 160/7

245-P2081010

0.37

230

$792.00

■

■ ■ ■ ■

The Drenox/OMNIA range is constructed of 304 grade stainless steel (including impeller in 160/7 and 250/10 model). Includes a heat exchange chamber to cool the motor for long periods of unsubmerged operation, and an oil chamber for lubrication of the seal. Maximum free clearance of solids is 3mm for 80/7, 6mm for 250/10, 20mm for 160/7. Suitable for continuous operation. Drenox 80/7 drains down to a level of 3mm (when operated manually) Dual oil-lubricated NBR70 lip seal with sand gaurd on a hard ceramic coated shaft at points of seal wear.

BIOX SERIES – VORTEX EFFLUENT PUMP Model

Biox 300/10 ■

■ ■ ■ ■

Part No.

volts

code

list price

245-P2091010

0.75

230

$955.00

The Biox is a submersible vortex pump that includes both a lip seal with sand guard and a Silcon carbide mechanical seal. 2” discharge connection enables free clearance of soft solids up to 40mm in diameter. Suitable for continuous use. Motor must remain submerged for cooling. 304 stainless steel pump body, base and impeller.

Head (meters)

Biox 300/10

4 Drenox 250/10 Omnia 160/7 2 Drenox 80/7 0

100

150

200

250

300

350

Flow (litres/minute)

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

297

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Compac 200 and Jung Simer 5 Engine MiniBlaze & Blazemaster - Loncin

PENTAIR PUMPS

COMPAC 200 Model

Compac 200

Part No.

Volts

Code

List Price

245-N10800400

0.65

230

$440.00

The Compac 200 is a robust corrosion resistant drainage submersible for clean and dirty water application containing up to 5mm solids. It has an integral float switch for confined installations and can be operated in auto or manual mode. ■ ■ ■ ■ ■ ■

Max flow - 150lpm. Max head -9m. Maximum water temperature: 40°C. Minimum water temperature: 1°C. Maximum submergence 7m. Minimum drainage level 3mm (when operated manually).

Applications: ■ Disposal of clean domestic waste water. ■ Dewatering (clean water) from sites such as tanks and wells. 10

Head (metres)

Construction Materials: Pump casing: Technopolymer. Suction base: Technopolymer. Motor body: 304SS. Impeller: Technopolymer. Motor shaft: 303SS. Mechanical seal: Graphite/ceramic in oil chamber.

100

120

140

160

Flow (litres/minute)

JUNG SIMER 5 Volts

Description

Code

List Price

245-OD6601

Part No.

230

Simer 5 Utility pump

$340.00

245-JP46884

230

Simer 5 Level Controller

$220.00

The Simer 5 utility pump is versatile and can be used for draining flat roofs or emptying swimming pools. The Simer 5 pump removes unwanted water quickly and efficiently, leaving a residual water level of just 2 mm. The pump already starts working at a water level of only 5 mm. A removable electrical cord, an anti-airlock valve and a very strong aluminum housing with enamel finish draw the pump out as a quality product from Pentair Jung Pumpen. ■ ■ ■ ■ ■

Removes water down to a level of 2mm Robust cast aluminium housing Self-venting starts at a water level of just 5mm Cooling jacket for motor housing Replaceable cable inlet

Plus accessory: Simer level control switch for automatic pump operation The new electronic switch SIMER LEVEL CONTROL offers special convenience. The level control can be integrated in the cable inlet and switches the pump on automatically at approx. 7 mm water level. Puddles and flood water can be removed promptly and automatically

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

298

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PENTAIR PUMPS

Jung WCFIX and Floodbox MiniBlaze & Blazemaster - Loncin Engine

JUNG WC FIX 260 Part No.

245-JP44232

Volts

Weight

Phase

Code

List Price

230

6kg

$800.00

The WCFIX 260 is a small lifting station, for processing toilet waste. Shower, hand basin and bidet in the same room can also be connected. Has exceptionally low noise level because no macerator is used, but waste and water are transported by means of streamlined vortex impeller. Complete with active carbon filter. The WCfix 260 comes with an acoustic alarm in case pumping is not possible. The WCfix 260 is wall-mounted and can be combined with all systems available. Plug and play system. ■ ■ ■ ■ ■ ■

Quiet Ready to connect Easy to maintain Acoustic Alarm Activated carbon filter Vortex impeller

Caution: Not suitable for pumping sanitary or any fibrous products. APPLICATION With the WCfix 260 it is possible to install an additional WC or an additional bathroom almost anywhere within the context of renovation or conversion works. The compact design of this pumping system for restricted use allows the direct connection of a standing toilet with a minimum flush volume of 6 l. The pumping is carried out particularly quietly by the flow-optimized open centrifugal impeller. Due to this design, regular cleaning is not necessary and servicing works are significantly reduced. A washbasin, a shower and a bidet can also be connected in the same room. The appliance is fully pre-assembled, ready for connection and operate fully automatically as soon as the flush is actuated.

JUNG FLOOD BOX Part No.

245-JP46397

Volts

Phase

Code

List Price

230

0.38

$575.00

Now it’s time to protect your property! This Pump Technology Flood Emergency Kit provides a powerful, durable Flood Pumping Solution – The “Flood Box” helps people who are affected by flood water, to react quickly and efficiently. The heart of this emergency kit is the powerful multifunctional submersible pump U 5 KS. Taken out of the carrying box it can be used either stationary or as a portable tool for several kinds of pumping situations. Included in Emergency Kit ■ Pump U5 KS • High performance motor Hmax 8 m and Qmax 11,5 m³/h ■ Fire hose 12,5 m • Quick and easy attachment by a C-coupling ■ Carrying cage • Pump fixation stabilizes the pump while it is used within the cage

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

299

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

CSM Vortex Submersible- Loncin Engine MiniBlaze & Blazemaster

PENTAIR PUMPS

STA-RITE CSM SERIES - VORTEX Model

Part No.

Volts

Phase

Type

Code

List Price

CSM240VF

245-CSM240VF

0.4

230

Auto

$660.00

CSM500VF

245-CSM500VF

0.75

230

Auto

$1252.00

CSM500VT

245-CSM500VT

0.75

400

Man

$1198.00

■

■ ■ ■ ■

This range of rugged cast iron submersible pumps is suitable for many dewatering, drainage, water treatment and wastewater applications. Cast iron construction making them solid, durable and rugged, with high abrasion resistance to suspended particles. Dual mechanical seals in oil bath with lip seal for motor protection to provide longer life combined with low friction for low power consumption. Epoxy cable - motor connection for preventing water ingress through the cable Dry motor design. Cap start/cap run - provides superior motor protection with maximum starting torque (CSM650VS only). Continuous Duty rating (40°C) [Intermittent Duty 50°C] designed to handle the largest and toughest jobs.

APPLICATIONS ■ Water transfer, grey water, effluent and sump applications.

STA-RITE CSM SERIES - CUTTER Model

Part No.

Volts

Phase

Type

Code

List Price

CSM850CS

245-CSM850CS

1.5

230

Man

$2057.00

CSM850CT

245-CSM850CT

1.5

400

Man

$1950.00

■ ■ ■

■

■ ■ ■ ■

The CSM850 cutter cast iron submersible pump is suitable for many dewatering, drainage, water treatment and wastewater applications where some solids or fibrous material is present. Cast iron construction making them solid, durable and rugged, with high abrasion resistance to suspended particles. Dual mechanical seals in oil bath with lip seal for motor protection to provide longer life combined with low friction for low power consumption. Epoxy cable - motor connection for preventing water ingress through the cable. Dry motor design. Cap start/cap run - provides superior motor protection with maximum starting torque Continuous Duty rating (40°C) [Intermittent Duty 50°C] designed to handle the largest and toughest jobs.

APPLICATIONS ■ Sewerage and other waste water applications. 20

Head (metres)

10 CSM850

CSM500 5 CSM240

100

200

300

400

500

600

7 00

800

900

1000

Flow (litres/minute)

*Terms and conditions apply. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

300

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Shurflo SLV and 2088 series MiniBlaze & Blazemaster - Loncin Engine

PENTAIR PUMPS

SLV SERIES LOW VOLUME 12 VOLT DC PUMP Part No.

235-SLV10-AA40

Volts

Max flow GPM/LPM

Max PSI/ Bar

Port Size

Max Draw (Amps)

Code

List Price

1/3.78

30/2.1

3/8”

2.5

$175.00

The Shurflo SLV is ideal for low volume, intermittent-duty applications requiring a compact pump with low power consumption. Unique design has no metals in the fluid path for maximum chemical resistance. Pump features include automatic demand operation and elastomers that handle a wide variety of chemicals. Perfect for low volume spraying and transfer. Cost effective yet with high performance and reliability. ■ ■ ■ ■ ■ ■

Automatic demand: 25psi on, 40psi off. Self-priming up to 750mm. Long-life pressure switch. Thermally protected ball bearing motor. Internal fan radiates heat. Integral on/off switch.

AMPS

PSI

BAR

GPM

LPM

0.2

0.9

3.4

1.8

0.7

0.73

2.8

2.1

1.4

0.62

2.3

2.1

0.49

1.9

2.5

12V

2088 SERIES HIGH VOLUME 12 OR 24 VOLT DC PUMP Part No.

Volts

Max Flow Gpm/Lpm

Max Psi/ Bar

Port Size

Max Draw (Amps)

Code

List Price

235-2088-343-135

12DC

3.0/11.3

40/2.8

½”

7.7

$285.00

235-2088-474-144

24DC

3.0/11.3

40/2.8

½”

2.73

$325.00

The Shurflo 2088 series diaphragm pumps deliver reliable performance in high flow, moderate pressure applications. They are used in a variety of spot spraying, multi-tip boom spraying and fertilizer drip applications that require flows up to 11.3/min. ■ ■ ■ ■ ■

Self-priming up to 3.7m. Chemical resistant materials. Can run dry without damage. Automatic demand. Built-in check-valve prevents back flow.

PSI

BAR

GPM

LPM

0.7

2.8

AMPS 12V

24V

10.2

5.3

2.41

1.4

2.69

10.2

5.5

2.63

2.1

2.36

8.9

6.7

2.71

2.8

2.05

7.8

7.7

2.73

2088 SERIES HIGH VOLUME FIN COOLED 12 VOLT DC PUMP Part No.

Volts

Max flow GPM/LPM

Max PSI/ Bar

Port Size

Max Draw (Amps)

Code

List Price

235-2088-313-145

12DC

3.6/13.6

45/3.0

½”

9.5

$445.00

Ideal for larger duty cycle application, aluminum heat sink motor design dissipates heat buildup effectively. Capacity of 13.6LPM open flow and max pressure of 3bar/45psi. On/Off demand pressure switch, ½” Male ports, Santoprene diaphragm. ■ ■ ■ ■ ■ ■

Self-priming up to 3.7m. Chemical resistant materials. Can run dry without damage. Automatic demand. Built-in check-valve prevents back flow. Heat sink for long duty cycles.

AMPS

PSI

BAR

GPM

LPM

0.7

3.09

11.7

6.4

1.4

2.82

10.7

7.6

2.1

2.49

9.4

8.7

2.8

2.15

8.1

9.5

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

301

12V

1 YEAR WARRANTY

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Shurflo 5000 Series MiniBlaze & Blazemaster - Loncin Engine

PENTAIR PUMPS

5000 SERIES HIGH VOLUME 12 DC PUMP Part No.

Volts

Max Flow Gpm/Lpm

Max Psi/ Bar

Port Size

Max Draw (Amps)

Code

List Price

235‑5040‑2301‑D011

12DC

4.0/15.1

65/4.5

½"

10.4

$410.00

The Shurflo 5000 series 5040-2301 is a heavy duty 12v intermittent duty pump with 4 head diaphragm for reliability and high volume applications such as cabin pressure systems and water transfer. The pump has an adjustable bypass valve and pressure switch for automatic control and to prevent deadhead pressure damage and is close coupled to a sealed and thermally protected motor for long service life. This pump can deliver up to 15 L/min or 65psi. Polypropylene housings, Santoprene diaphragm and EPDM valves for chemical resistance. For heavy-duty applications, it is recommended to use the Shurflo Cool Clip motor heat sink. ■ ■ ■ ■ ■

Powerful smooth flow. Can run dry without damage. Self-priming up to 2.4m. Chemical resistant elastomers. Thermally protected motor.

5000 SERIES HIGH VOLUME 12 DC PUMP Part No.

Volts

Max Flow Gpm/Lpm

Max Psi/ Bar

Port Size

Max Draw (Amps)

Code

List Price

235‑5059‑3611‑D012

12DC

5.3/20.1

90/6.2

½"

20.9

$410.00

The Shurflo 5000 series 5059-3611 is a heavy duty 12v intermittent spray pump with 4 head diaphragm for reliability and high volume applications such as spot or multi-tip spraying and fertilizer application. The pump has an adjustable bypass valve to prevent deadhead pressure damage in installations where a pressure switch is not desired and is close coupled to a sealed and thermally protected motor for long service life. This pump can self-prime up to 2.4m and deliver up to 20 l/min or 90psi. Polypropylene housings, Santoprene diaphragm and Viton valves for chemical resistance. For heavy-duty applications, it is recommended to use the Shurflo Cool Clip motor heat sink. ■ ■ ■ ■ ■

Powerful smooth flow. Can run dry without damage. Self-priming up to 2.4m. Chemical resistant elastomers. Thermally protected motor.

5000 SERIES HIGH VOLUME 12 DC PUMP Part No.

Volts

Max Flow Gpm/Lpm

Max Psi/ Bar

Port Size

Max Draw (Amps)

Code

List Price

235‑5059‑1311‑D012

12DC

5.3/20.1

60/4.1

½"

17.0

$410.00

The Shurflo 5000 series 5059-1311 is a heavy duty 12v intermittent duty spray pump with 4 head diaphragm for reliability and higher volume applications such as spot or multi-tip spraying and fertilizer application. The pump has an adjustable pressure switch for automatic control of the pump and is close coupled to a sealed and thermally protected motor for long service life. This pump can self-prime up to 2.4m and deliver up to 20 l/min or 60psi. Polypropylene housings, Santoprene diaphragm and Viton valves for chemical resistance. For heavy-duty applications, it is recommended to use the Shurflo Cool Clip motor heat sink. ■ ■ ■ ■ ■

Powerful smooth flow. Can run dry without damage. Self-priming up to 2.4m. Chemical resistant elastomers. Thermally protected motor.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

302

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Shurflo 8000 Series MiniBlaze & Blazemaster - Loncin Engine

PENTAIR PUMPS

POWER TWIN 12 VOLT PUMP Part No.

235-4111-035

Volts

Max flow GPM/LPM

Max PSI/ Bar

Port Size

Max Draw (Amps)

Code

List Price

12DC

6.25/23.7

40/2.8

5/8”

17.2

$580.00

Take all the performance features of the time-tested 2088 series and double it, and the result is the high-flow Power twin. Delivers an open flow of 23.7LPM at a mere 8.7amps. At 2.8bar/40psi it delivers 13.2LPM and draws only 17.2Amps. The Power twin is excellent for transferring, light-duty spraying and use as a 1:1 proportioning pump. ■ ■ ■ ■ ■ ■

Up to 23.7LPM (6.25gpm). Thermally-protected motor with heat sink. Self-Priming. Quiet, balanced operation. Long life pressure switch. Supplied with intake/discharge manifold.

AMPS

PSI

BAR

GPM

LPM

0.7

5.7

21.6

12.2

12V

1.4

5.0

19.0

14.5

2.1

4.3

16.2

16.1

2.8

3.5

13.2

17.2

8000 SERIES HIGH PRESSURE 12 VOLT DC PUMP Part No.

Volts

Max Flow Gpm/Lpm

Max PSI/ Bar

Port Size

Max Draw (Amps)

Code

List Price

235-8000-543-136

12DC

1.8/6.8

60/4.1

½”

7.3

$240.00

235-8000-547-189

12DC

1.8/6.8

100/6.9

½”

8.7

$240.00

The 8000 Series diaphragm pump is SHURflo’s most widely used agriculture pump, Viton valve materialassures maximum chemical resistance. The unique conical valve design delivers high flow rates at maximum discharge pressures making the 8000 series the pump of choice for sprayers used on the farm or around the yard. These pumps deliver up to 6.8l/m providing maximum performance in a wide range of general agriculture and spot spraying applications. ■ ■ ■ ■ ■ ■

PSI

BAR

GPM

LPM

AMPS

235-8000-543-136

1.4

1.26

4.7

5.0

2.8

1.14

4.3

6.2

3.4

1.08

4.1

6.8

4.1

1.02

3.9

7.3

235-8000-547-189

Self-Priming up to 2.4m. Chemical resistant materials. Designed for heavy duty spraying. Can run dry without damage. Built in check valve. Built in pressure switch for automatic demand.

1.4

1.45

5.5

4.2

2.8

1.31

5.0

5.5

4.1

1.22

4.6

6.5

100

6.9

0.96

3.6

8.7

8090 SERIES 230 VOLT AC PUMP Part No.

Volts

Max flow GPM/LPM

Max PSI/ Bar

Port Size

Max Draw (Amps)

Code

List Price

235-8090-212-246

230AC

1.22/4.6

60/4.1

3/8”

0.23

$365.00

235-8090-902-248

230AC

1.42/5.4

100/6.9

3/8”

0.36

$365.00

The 8090 series are a durable and efficient positive displacement pump available in two sizes: 4.6LPM/60psi and 5.4LPM/100psi. On/Off demand pressure switch is supplied standard. Compact size, 3/8” female ports. ■ ■ ■ ■ ■ ■ ■ ■ ■

PSI

BAR

GPM

LPM

AMPS

235-8090-212-246

Self-Priming up to 2.4m. Chemical resistant materials. Designed for heavy duty spraying. Can run dry without damage. Built in check valve. Built in pressure switch for automatic demand. Not suitable for continuous duty. Not supplied with plug/flex. Max inlet pressure 30PSI

1.4

0.97

3.7

0.17

2.1

0.9

3.4

0.19

2.8

0.84

3.2

0.21

3.4

0.77

2.9

0.23

235-8090-902-248

1.4

1.19

4.5

0.21

2.8

1.05

4.0

0.25

4.1

0.95

3.6

0.29

100

6.9

0.79

3.0

0.36

*Only suitable for intermittent spray duty for applications such as carpet cleaning. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

303

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Shurflo 9000 Series Solar- Loncin Engine MiniBlaze & Blazemaster

PENTAIR PUMPS

9300 SERIES SUBMERSIBLE 24VOLT DC SOLAR PUMP Part No.

Volts

Max flow GPH/LPH

Max PSI/ Bar

Outlet

Max Draw (Amps)

Code

List Price

235-9325-043-101

230AC

1.22/4.6

60/4.1

3/8”

0.23

$1350.00

The SHURflo 9300 series pump offers a solution to remote water needs. It’s rugged, durable and built to last. This pump delivers up to 443 LPH and up to 100psi, great for applications in livestock watering, irrigation, remote islands and homes. ■ ■ ■ ■ ■ ■

Fits wells 4”/102mm diameter. Unique waterblocked cable connector. Accepts a variety of jacketed cables from power source. Runs dry without damage. Corrosion proof housing with stainless steel fasteners. Long life, 24Volt DC operation, (12VDC operation is approx. 50% less flow than 24VDC).

METERS

FEET

LPH

GPH

WATTS

AMPS

6.1

443

117

1.5

18.3

413

109

2.1

30.5

100

390

103

2.6

42.7

140

375

115

3.1

54.9

180

352

135

3.6

70.1

230

310

155

4.1

We can supply Solar Panels. Contact Argon

9300 SERIES SUBMERSIBLE DC PUMP LCB CONTROLLERS Part No.

Max Output Current

Shutdown Voltage

Enclosure

Code

List Price

235-902-100

5 Amps

28V

$330.00

235-902-200

7 Amps

28V

YES

$650.00

The 902 LCB Controllers boosts the 9300 Submersible pumps performance by up to 30%. The controller optimizes the solar water pumping system by translating the current and voltage from the photovoltaic panels into a combination that is better matched to that needed by the pump. With the optional float switch installed, the controller will automatically stop the pumping when the reservoir is full. The 902-200 controller has additional features which include a switch selector for 12V operation, a manual on/off switch for easy pump maintenance, high/low water level sensors so the pump will not run when the well water is too low and a water proof enclosure. ■■ Operates on 24VDC. ■■ Increases daily water output up to 30%. ■■ System starts pumping earlier in the morning and stops pumping later in the evening. ■■ Protects pump from low or high volume conditions. ■■ Terminals for float switch. ■■ Includes water level monitor mode with probes and cable. (902-200 version).

9300 KITSET Part No.

235-9325-KIT20

Volts

Max flow GPM/LPM

Max PSI/ Bar

Port Size

Max Draw (Amps)

Code

List Price

230AC

1.22/4.6

60/4.1

3/8”

0.23

$3200.00

The kit includes components to set up the 9300 submersible pump to provide up to 443 litres per hour water using the power of the sun in remote applications where mains power is not available. ■ 9300 Solar Pump and 902-100 controller. ■ 24v Solar Panel with mounting rails and roof brackets. ■ 20m of Pump cable and 40m of solar cable. ■ Controller enclosure and connections. ■ 10m PVC float switch. Kitset requires assembly and does not include the pressure pipe or panel mounting structure (user supplied) Please contact Argon for a site specific quotation or for kit details.

1 YEAR WARRANTY Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

304

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Shurflo Accessories and Spare Parts MiniBlaze & Blazemaster - Loncin Engine

PENTAIR PUMPS

SHURFLO ACCESSORIES Part No.

Description

Picture

Code

List Price

235-255-613

Bowl style strainer, 50 mesh screen, ½” NPSM Male inlet x ½” Female outlet, Viton O Ring

$28.00

235-181-101

Accumulator tank, 24oz total capacity, (liquid and air) pre charge pressure 20psi, 0-100psi range, santoprene bladder, mounting bracket, ½” female ports

$135.00

235-234-2926

12mm (1/2”) NPT, Female x 12mm(1/2”) barb straight – Polypropylene

$8.00

235-234-2916

12mm (1/2”) NPT, Female x 10mm(3/8”) barb straight – Polypropylene

$8.00

235-234-3926

12mm (1/2”) NPT, Female x 12mm(1/2”) barb Elbow – Polypropylene

$8.00

235-234-3916

12mm (1/2”) NPT, Female x 10mm(3/8”) barb Elbow – Polypropylene

$8.00

235-244-5286

10mm (3/8”) NPT, Male x 12mm (1/2”) NPT barb

$8.00

235‑34‑007

Cool Clip Heat Sink

$36.00

Cool Clip

SHURFLO SPARE PARTS Part No.

Description

Picture

Code

List Price

$65.00

Pump model 2088-343-135

235-94-230-36

Switch Kit viton

235-94-237-05

Check valve kit (suits 2088-313-145 also)

$78.00

235-94-232-05

Valve assy kit (suits 2088-313-145 also)

$128.00

235-94-238-03

Diaphragm & Drive assy kit (suits 2088-313-145 also)

113.00

235-94-231-30

Upper housing kit

$36.00

$82.00

Pump Model 2088-313-145

235-94-230-55

Switch Kit viton

235-94-375-06

Switch kit santoprene

$72.00

235-94-374-08

Check valve kit Viton

$23.00

Pump Model 8000-543-136

235-94-378-00

Upper housing kit

$52.00

235-94-390-05

Valve assy kit Viton

$112.00

235-94-385-32

Diaphragm & Drive assy kit

$135.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

305

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Shurflo Spare Parts MiniBlaze & Blazemaster - Loncin Engine

PENTAIR PUMPS

Spare Parts

2088

4111

2088

4111

5059

9325

MODEL nuMbEr

2 switCh Kit

94-237-05

94-231-30

94-232-05

94-238-03

2088-474-144

94-230-35

94-237-00

94-231-30

94-232-00

94-238-03

2088-313-145

94-230-55

94-237-05

94-231-30

94-232-05

94-238-03

MODEL nuMbEr

MODEL nuMbEr 8000-543-136 8000-543-138 8000-342-136 8002-793-238 8090-902-248 8090-212-246

SLV

MODEL nuMbEr SLV10-AA40

9325

MODEL nuMbEr 9325-043-101

SF1105

4 uppEr hOusing Kit 5 VaLVE ass’y Kit 6 DiaphragM & DriVE ass’y Kit

3 ChECK VaLVE Kit

94-230-36

5059-1311-D011

8000

SF1105

2088-343-135

MODEL nuMbEr SF-1105-PTS SF-1105

2 VaLVE ass’y Kit

1 uppEr hOusing Kit

4111-035

5059

8000

94-231-40

94-232-05

1 switCh Kit 7 ChECK VaLVE Kit 94-804-05

3 DiaphragM & DriVE ass’y Kit 5 uppEr hOusing & switCh Kit

94-804-03

94-238-03

uppEr hOusing w /switCh Kit

3 VaLVE ass’y Kit

94-804-00

94-374-08 94-374-08 94-374-10 94-374-16 94-374-16 94-374-09

94-378-00 94-378-00 94-378-00 94-379-00 94-379-00 94-379-00

switCh Kit

ChECK VaLVE Kit

uppEr hOusing Kit

None

None Kit

94-135-00

94-136-00

1 MOtOr ass’y Kit 94-718-00 94-718-00

94-137-00

DiaphragM &

10 DriVE ass’y Kit

DriVE Kit

94-385-32 94-385-32 94-395-05

94-385-04 94-385-32 94-385-31 94-385-31 DriVE Kit

Dia/DriVE Kit

None

5 MOtOr 6 CanistEr 7

94-138-00

2 DiaphragM & DriVE ass’y Kit 94-719-00 94-719-00

94-804-02

DiaphragM Kit

LOwEr hOusing

DiaphragM & DriVE ass’y Kit

VaLVE ass’y Kit

None

1 LiFt pLatE 2 CabLE pLug 3 VaLVE ass’y

6 DiaphragM Kit

94-390-05 94-390-05 94-390-05 94-390-06 94-390-06 94-390-08

uppEr hOusing ass’y Kit

94-804-01

ChECK VaLVE uppEr VaLVE ass’y 2 switCh Kit 3 4 hOusing Kit 5 Kit Kit 94-375-06 94-375-18 94-375-05 94-375-18 94-229-08 94-229-04

94-230-40

94-139-00 94-140-00

3 VaLVE hOusing Kit 94-720-05 94-720-05

FiLtEr sCrEEn

94-141-00

8 O’ring 94-142-00

4 uppEr hOusing ass’y Kit 94-721-00 94-721-00

7 Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

306

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

307

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Index

What’s New!

UVI INDUSTRIAL SERIES

SSX SERIES

FGP SERIES

Pages 8-10 Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

308

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Index

310

311

SUBMERSIBLE PUMPS NSP Pond Pump

312

313

LB/VXP Series

316

314

PICCOLO 160 Series

317

ROVER Series

320

324

DSX Series

DMS Series

DCX Series

327

DEMAX Series

330

MAJESTO Series

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

SSX Series

323

326

329

UVI Industrial Series

TINY SUB Series

LB Series

BULLET Series

SMART SAM Series

319

309 322

325

328

ELITE Series

JAVA Series

REALE Series

315

318

321

D-SUB Series

331

LBC Series 309

ULTRAVORT Series

FGP Series

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Pond pumps

N EW

POND PUMP Part No.

Flow rate

Head

Power

Protection

Code

List Price

240‑NSP2000

2000 L/H

2.3m

40.0 W

IPX8

$215.00

240‑NSP4000

4000 L/H

3.7m

40.0 W

IPX8

$305.00

240‑NSP9000

9000 L/H

4.0m

140.0 W

IPX8

$375.00

Areta NSP Series Submersible pond pump for circulation, fountains and water features with magnet driven wet rotor for quiet and efficient operation in wide range of applications. Low maintenance design with large removable, cleanable pre-filter screen to prevent pump clogging. Top discharge for simple installation and 10m power cord. Features: n Ponds n Water features n Fountains

NSP Series

45 40

35 30

h (m) 3

(kPa)

25 20

NSP9000

NSP4000

NSP2000

10 5

1000

2000

3000

4000

5000

6000

7000

8000

0 9000

Q (l/h)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

310

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

D-Sub Series

D-SUB SERIES Part No.

Watts

Volts

Amps

Code

List Price

240-DSUB120

120

10.0

$199.00

240-DSUBKIT

120

10.0

$225.00

The DSUB120 is a compact 12v submersible pump with many applications. Ideal for emergency drainage, dewatering post holes or calf milk. It has a rugged plastic housing and impeller with top mounted lead and discharge for simple installation and a removable suction screen. DSUB KIT includes: 5 metre discharge hose for rapid installation and use. 12V DC

Features: n 25mm vertical discharge port. n Double Lip Seal. n 6m lead. n Top Lifting handle. Performance: 8 7 6 5 HEAD (M) 4

3 2 1 0 0

FLOW (LPM)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

311

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

LB Compact Series

LB COMPACT SERIES Part No.

Phase

Volts

Float Switch

Outlet

Code

List Price

240-LB10A

1/8

0.1

230

Yes

20mm

$265.00

240-LB15A

1/5

0.15

230

Yes

25mm

$350.00

The LB series are perfect for those small pumping duties where clean or dirty water without solid particles needs to be drained or transferred somewhere. At only 100 & 150W they use very little power and are very compact, the vertical discharge means they can sneak into tight little spots. The float switch can be removed if not required or if limited space prevents this from functioning. Alternative automatic level control to the float switch can be by way of level probes, refer to the pump accessories section. Features: Main outer casing – Die cast aliminium. Top cover/handle/base and impeller – glass reinforced thermo plastics. Seals – Triple lip seal in oil bath. Motor is oil free and equipped with thermal auto reset overload. Supplied with 6m lead.

n n n n n

120mm/4.7in 120mm/4.7in

221mm/8.7in 221mm/8.7in

Performance:

HEAD (M) 4

LB15 LB10 2

9 R1 9 R1

FLOW (LPM)

72.5mm/2.9in 72.5mm/2.9in 66mm/2.6in 91.5mm/3.6in 66mm/2.6in 91.5mm/3.6in

MAXIMA VXP550 SUBMERSIBLE Part No.

240-VXP550

1 13 32mm 2m m/ /5.2i 5.2 n in

Volts

Code

List Price

0.55

0.75

230

$175.00

R5 R15

The VXP550 is a great low cost submersible pump which is very popular for pumping calf milk and of course many other clean and dirty water applications. n n n n n

Maximum flow of 140 litres per minute and up to10m head. Supplied with 10m lead and plug, float switch and discharge adapter. 35mm maximum solids pass. 32mm discharge Not suitable for continuous operation

EXCELLENT CALF MILK PUMP

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

312

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Piccolo 160 Series

PICCOLO 160 SERIES Part No.

Phase

Volts

Code

List Price

240-PC160

1/6

0.1

230

$295.00

$25.00

240-PCPB

base plate accessory

A great little pump for small pumping duties in applications where water depth doesn’t allow a traditional float switch to operate. The PICCOLO 160 has an incorporated level control module mounted by the intake which automatically turns the pump on when the water level rises to 40mm, when the water level drops to less than 30mm the integrated timer allows the pump to run on for 40 seconds to reduce the water level to 5mm (depending on the size of the chamber or area being drained) before switching the pump off. Features: n Automatic level control with run on timer. n 3mm solids handling capacity. n Top discharge. n Compact design. n Supplied with 3m lead and 3 Pin plug. n 40º max liquid temperature.

Automatic Down to 5 MM

Performance:

7 6 5 4 PC160

HEAD (M)

3 2 1 0 0

FLOW (LPM)

The PC160 also has a base accessory that fits to the bottom of the pump, spreading the load and making the pump more stable – ideal for use on pool covers or in installations with uneven ground.

198

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

313

250

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Elite Series

ELITE SERIES Part No.

Phase

Volts

Float Switch Type

Code

List Price

240-ELITE 200A

0.3

0.22

230

Flexible

$345.00

240-ELITE200AC

0.3

0.22

230

Cylinder

$452.00

Features: n Nylon and fibre outer casing, strainer and impeller. n Heat treated 410 stainless steel shaft. n 304 stainless steel motor housing where liquid is in contact. n Oil-lubricated triple shaft seals with the lowest one made of Viton for greater abrasion resistance. n Maximum solids passage allowance – ELITE200 6mm

Elite 200

Performance: 8

Head 50 15 6

50 Hz

40 HEAD (M) 4

ELITE200

30 20

ITE

FAM 2

Elite 200AC

0m ft 1/min

USGPM

100

150

200 50

100

120

FLOW (LPM) 250 300 350

140

160

Capacity AMO 600

ELITE 600

255.5

ø 40

Unit:mm

148.5 188

ø 40

140

87.5

370

ELITE 200Elite 200

170

170 230

230

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

314

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Smart SAM Series

SMART SAM SERIES Part No.

Volts

Discharge

Code

List Price

240-SAM250

230

1/4

0.2

$325.00

240-SAM300

230

1/3

0.25

$435.00

240-SAM500

230

1/2

0.4

$510.00

Features: n Integrated on/off level control PCB – For particularly tight applications. n Double outer casing – allows for continuous full load operation even if not fully submerged. Technical Features: n Lead length - SAM 250 - 3m. SAM 300/500 - 5m.

Performance:

SA M-

IDEAL FOR EMPTYING SWIMMING POOLS & SPAS

Construction:

Specifications: Dimensions & Specifications Part No.

Outlet

Weight

SAM250

32mm (1-1/4”) Male

155

260

143

5.9kg

SAM300

40mm (1-1/2”) Female

196

300

312

7.1kg

SAM500

50mm (2”) Female

196

300

312

7.4kg

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

315

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Rover Series

ROVER SERIES Part No.

Phase

Volts

Float Switch

Code

List Price

240-ROVER300

0.3

0.25

230

$335.00

240-ROVER300A

0.3

0.25

230

Yes

$415.00

The ROVER series pumps with its top discharge, small profile and solids handling capacity means they fit into many applications side discharge pumps can’t. Features: Capable of pumping 18mm solids. n Robust fiber reinforced plastic construction. n Mechanical seal and lip seal in oil bath for durability. n Large side passage and double volute to prevent blockages. n Available with or without a float switch. n

Technical Features: n Liquid Temperature: 0°C to 35°C. n Protection class: IP68. n Lead length: 3m. n Amp draw: 2A.

Performance: 9 8 7 6

ROVER 300

5 HEAD (M)

4 3 2 1 0 0

FLOW (LPM)

100 110 120 130 140 150 160 170

DIMENSIONS & SPECIFICATIONS Part No.

Rover300

Outlet

Weight

32mm (1-1/4”) Male

135

275

143

5.9kg

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

316

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Java Series

JAVA SERIES Part No.

240-JAVA300

Phase

Volts

Float Switch

Code

List Price

0.3

0.25

230

$295.00

The Java series is a 24 hour rated continuous duty submersible pump with some excellent features. Applications that demand this kind of duty such as pond pumps bring this pump into a field of its own. Features: n Oiled Cooled Silicon carbide Mechanical Seal. n Open Impeller. n Hermetically Sealed cable entry. n 24hr Continuous Duty Rated. Technical Features: n Liquid Temperature. n Max Immersion Depth 6m. n Protection class IP68. n Lead Length: 3m.

Performance: 8

Low axial load & zero radial load

7 6 5

JAVA300

Hermetically Oil bathed Sic/Ce Sealed Cable Single Mech. entry Seal

HEAD (M) 4

292mm

2 1 0 0

FLOW (LPM)

100

110

120

130

140

150

Oil to cool down the Mech seal

DIMENSIONS & SPECIFICATIONS Part No.

Java300

Outlet

Rated Performance

Maximum Performance

Weight

32mm (1-1/4”)

100l/m @3m

140l/m 7m H

3.6kg

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

317

145mm 168mm

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

TINY SUB Series

TINY SUB SERIES Part No.

Phase

Volts

Amps

Float Switch

Code

List Price

240-TS250

0.25

0.18

230

1.5

$475.00

240-TS250A

0.25

0.18

230

1.5

Yes

$505.00

240-TS300

0.33

0.25

230

1.8

$520.00

240-TS300A

0.33

0.25

230

1.8

Yes

$550.00

The TINY SUB series pumps are a durable, compact & high performing drainage pump for construction sites, swimming pool drainage, small storm water cesspit drainage, water features and many other applications. Available in two sizes with or without a float switch. Features: Strong and durable 304 stainless steel construction. n Double mechanical seal: Pump Side- silicon carbide/Motor side –Carbon/Silicon carbide. n Top discharge. n Float switch option for automatic operation. n 10m power lead. n Maximum liquid temperature: +40ºC. n Built in thermal overload. n

TS Series

Performance: 12 11 10

9 8

HEAD (M) 6

TS300A

TS250A 5 4

3 2 1

100

FLOW (LPM)

120

140

Dimensions

DIMENSIONS & SPECIFICATIONS Part No.

Discharge

TS250

130

280

32mm 1/1/4”

TS300

150

290

32mm 1/1/4”

Discharge

QDX3-5-0.12BS

130

280

G 1.25 F

QDX3-7-0.18BS

130

280

G 1.25 F

QDX5-7-0.25BS

150

290

G 1.25 F

Model

Dimensions Model Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

318

QDX3-5-0.12BS

Packing Size A B C N.W. (mm) mm mm Discharge Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

130

280

G 1.25 F

170

190

300

6kg

SUBMERSIBLE PUMPS

SSX Series

SSX SERIES SUBMERSIBLE Part No.

Phase

Volts

Amps

Float Switch

Outlet

Code

List Price

240-SSX300

0.33

0.25

230

2.0

32mm

$525.00

240-SSX300A

0.33

0.25

230

2.0

Yes

32mm

$555.00

240-SSX300AC

0.33

0.25

230

2.0

Yes

32mm

$575.00

The Davies Pumps SSX series submersible pumps are a durable stainless, compact high performing drainage pump for construction sites, swimming pool and small storm water cesspit drainage and many other applications. Available without float switch or with cable type or vertical canister type float switch. The impeller is open faced to allow up to 10mm solids and the pump can also have a low suction screen which allows the pump to suck down to 5mm. The top discharge design reduces space usage for tight installs and cools the motor even while running partially submerged. Removable low suction skirt to allow draining down to 5mm. Features:

n Strong and durable 304 stainless steel construction n Mechanical seal and Lip seal in oil bath n Top discharge 32mm (1 ¼”) n Float switch options for automatic operation (Canister n 10m power lead n Maximum liquid temperature: +50°c n Built in thermal overload n Max depth: 5m

or Cable)

SSX300A X1 - MA

SSX300AC X1 - MS

10 [ Psi ] [ m] 0

9 8

12 11

9 8 6 5

5 HEAD (M)

X1 SERIES 50Hz ISO9906 Annex A

[ f t] 30 25 20

6 5

4 3 2

3 2

[ U.S.GPM ] 5

SSX300 5

1 0

40 2

60 3

80 4

100

120 7

140 8

160 9

0 Q[l/min] 3

Q[m /h]

1 0

100

120

140

160

180

FLOW (LPM)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

319

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Reale Series

REALE SERIES Part No.

Phase

Volts

Amps

Float Switch

Code

List Price

240-RL750A

0.75

0.55

230

3.3

Yes

$765.00

240-RL750AC

0.75

0.55

230

3.3

Yes

$795.00

240-RL1000A

1.0

0.75

230

5.3

Yes

$825.00

240-RL1000

1.0

0.75

230

5.3

$795.00

240-RL1500A

1.5

1.1

230

6.7

Yes

$885.00

The REALE series submersible pumps are an all stainless steel industrial dewatering drainage pump for clean water and grey water applications. For emptying storm water chambers, grey water sumps, swimming pools etc. Features: n Double mechanical seals. n 304 Stainless steel construction. n Urethane coated wear plate. n Top Discharge. n Float switch or manual operation. n Maximum liquid temperature: +35oC.

REALE Series

Performance: 17 16 15 14 13 12 11 10 HEAD (M)

RL1500

RL1000

RL750

6 5

4 3 2 1 0

100

200

300

400

FLOW (LPM)

178

L L1

DIMENSIONS & SPECIFICATIONS Part No.

RL750

357

437

341

459

370

RL1000

407

497

391

514

425

RL1500

407

497

391

514

425

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

320

RP 1 1/2" 53

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

LB Series

LB SERIES Part No.

Phase

Volts

Amps

Float Switch

Outlet

Code

List Price

240-LB40A

0.5

0.4

230

2.5

Yes

50mm

$740.00

240-LB75A

1.0

0.75

230

5.1

Yes

50mm

$997.00

240-LB75T

1.0

0.75

415

1.8

50mm

$997.00

240-LB75TA

1.0

0.75

415

1.8

Yes

50mm

$1150.00

240-LB215A

2.0

1.5

230

9.7

Yes

50mm

$1575.00

240-LB215T

2.0

1.5

415

3.7

50mm

$1525.00

240-LB215TA

2.0

1.5

415

3.7

Yes

50mm

$1615.00

Features: Rugged cast iron construction for general drainage and effluent situations. n Epoxy sealed cable entries. n Quality 410 stainless steel heat treated shaft. n 304 Stainless steel suction strainer, screws and washers. n Dynamically balanced cast iron impeller. n Lip seal followed by double mechanical seal in oil chamber for exceptional durability. n Maximum submerged depth: 8m. n Maximum liquid temperature: 40oC. n Three phase version with float switch incorporates internal contactor. n

Performance: 24 22 20 18 16

LB215

14 HEAD (M) 12

LB75

LB40

6 4 2 0 0

100

150

200

250

300

350

400

450

500

FLOW (LPM)

B D

DIMENSIONS & SPECIFICATIONS Part No.

LB40

340

125

250

LB75

380

115

140

270

LB215

430

105

130

330

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

321

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

DSX Series

DSX SERIES Part No.

Phase

Volts

Amps

Float Switch

Code

List Price

240-DSX1000A

1.0

0.75

230

6.0

Yes

$785.00

High pressure stainless steel submersible pump for water transfer from open wells, rivers and dams or commonly used in treated effluent disposal applications. Featuring a large single impeller with high passage clearance up to 5mm to avoid blockages, Double mechanical seals protected by oil seal for long term durability. Features: 304 Stainless steel pump outer casing. 304 Stainless steel pump shaft. Cast iron top and bottom motor housing. Glass fiber reinforced impeller and diffuser. Buna-N O-rings. Double sided mechanical seal in oil bath: Silicon carbide/silicon carbide - pump side. Carbon/Silicon carbide – Motor side. n Maximum liquid temperature: 40oc – continuous rated. n Class B rated motor insulation, IP68 protection. n Incorporated motor thermal protector. n 10m Lead - material HO7RN-F. n Float switch supplied as standard (can be removed if requested). n n n n n n

Performance:

DSX Series

35 DSX1000

25 20 HEAD (M)

C 10 A

5 0 0

100

120

FLOW (LPM)

DIMENSIONS & SPECIFICATIONS Part No.

DSX1000A

185

340

1/1/4

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

322

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

DCX Series

DCX SERIES Part No.

Phase

Volts

Amps

Float Switch

Code

List Price

240-DCX500A

0.5

0.37

230

3.7

Yes

$615.00

240-DCX1000A

1.0

0.75

230

5.3

Yes

$695.00

240-DCX1500A

1.5

1.1

230

7.1

Yes

$765.00

The DCX series are a high pressure submersible pump most commonly used in treated effluent disposal applications. Featuring a large single impeller with high passage clearance up to 5mm to avoid blockages, Double mechanical seal for long term durability, rugged cast iron construction. Features: Cast iron pump housing and motor top cover. n 304 Stainless steel motor housing. n Glass fiber reinforced impeller. n Double sided mechanical seal in oil bath: Silicon carbide/silicon carbide - pump side. Carbon/Silicon carbide – Motor side. n Maximum liquid temperature: 40oc – continuous rated. n Class B rated motor insulation. n Incorporated motor thermal protector. n 10m Lead length. n Complete with Float switch. n

Performance:

DCX Series

40 35 30

DCX1500

25 HEAD (M) 20

DCX1000 DCX500

10 5 0 0

100

FLOW (LPM)

120

140

160

180

DCX500A

185

260

420

1”

DCX1000A

185

260

420

1”

DCX1500A

185

260

420

1”

Part No.

DIMENSIONS & SPECIFICATIONS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

323

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Bullet Series

BULLET SERIES Part No.

Phase

Volts

Amps

Float Switch

Code

List Price

240-BULLET 500

0.5

370

230

3.5

Yes

$780.00

240-BULLET 1000

1.0

750

230

6.5

Yes

$1145.00

The twin impeller Bullet makes pumping dirty water to high heads possible, capable of 8mm solids up to 25m and flows out to 220 litres per minute. Features: Double open impellers. n Lip seal & Double mechanical seal in oil bath. n Inlet strainer. n Float Switch for automatic level control. n In-Winding thermal auto reset overload protector. n

Technical Features: n Liquid Temperature: 0°C to 40°C. n pH: 6 to 8. n Protection class IP68. n Maximum immersion depth: 6M. n Maximum solids capacity: 8mm. n Lead length: 5m. Performance: 28 26 24 22 20 18 16

BULLET1000

HEAD (M) 14

BULLET500

12 10 8 6 4 2

0 0

100

150

200

250

FLOW (LPM)

DIMENSIONS & SPECIFICATIONS Part No.

Outlet

Weight

Bullet 500

32mm (1-1/4”)

370

151

227

220

151

13kg

Bullet 1000

50mm (2”)

390

170

240

233

170

15Kg

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

324

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

DMS Series

N EW

DMS SERIES Part No.

Phase

Amps

Volts

Code

List Price

240-DMS308M

0.8

0.6

4.0

230

$750.00

240-DMS310M

1.0

0.75

5.7

230

$799.00

240-DMS312M

1.2

0.9

6.5

230

$885.00

240-DMS512M

1.2

0.9

6.4

230

$885.00

240-DMS520M

2.0

1.5

9.2

230

$1125.00

DMS ACCESSORIES Part No.

Description

Code

List Price

345-D210238

Float Switch

$55.00

345-D210239

10 meter Cable

$125.00

345-D210240

20 meter Cable

$150.00

345-D210241

40 meter Cable

$290.00

The Davies Multisub is a rugged 5” stainless multistage submersible pump designed for use with clean water from open wells or tanks. The Multisub comes with three different power lead length options and has the option of a float switch for run dry protection or automatic emptying operation. The float switch and power cord are fitted with plug and play pump connections for simple installation or replacement. Match the Multisub with a Hydrogenie controller to create a reliable, low noise pressure system that is simple and fast to install but offers exceptional performance. Ideal for household water supply, irrigation or treated effluent to dripper lines. Features: n Double mechanical seal with oil bath. n Long life integral class B capacitor. n Water cooled motor. n 32mm discharge. n Outer casing, discharge and intake fitter AISI 304 stainless steel. n Techno-polymer impellers and diffusers. n Removable power cord (differents lengths available).

DIMENSIONS

Technical Features: n Max. immersion depth: 50m. n Max. pumped liquid temperature: +40°C (+104°F). n Max. amount of sand tolerated in water: 50 g/m³. n Mounting: vertical and / or horizontal. n Degree of protection: IP68. n Insulation class: F. n Voltage tolerance: ± 10%.t No.

Model

Length (mm)

Weight

DMS308

495

15.5

DMS310

521

16.5

DMS312

590

DMS512

515

17.5

DMS520

620

20.5

Performance: 110 100 90 80 70

5” Diameter (125mm)

312

310

HEAD (M) 50

520

40 308

512

30 20 10 0 0

100

120

140

160

FLOW (LPM) Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

325

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Demax Series

N EW

DAVIES DEMAX SERIES Part No.

Volts

Amps

Float Switch

Discharge

Code

List Price

240-DM050

0.5

0.37

230

3.0

50mm

$545.00

240-DM050A

0.5

0.37

230

3.0

Yes

50mm

$595.00

240-DM100

1.0

0.75

230

5.4

50mm

$785.00

240-DM100A

1.0

0.75

230

5.4

Yes

50mm

$835.00

The Davies DEMAX series pumps are a rugged contractors pump suitable for de-watering tasks such as emptying sumps, footings and flooded areas. The DEMAX has a vortex impeller with extended shaft agitator to reduce intake blockages and a rugged flexible PVC moulded foot to protect pump base. Available with or without a float switch and with a rugged top handle for ease of use. Applications: n

Waste water for domestic and civil.

Features: n Non clogging Vortex Impeller design. n Thermal Protector (single phase). n Double Mechanical Seal. n Double shielded Ball Bearing. n Fluid Temperature 0 to 40ºC. n Pump Casing Cast Iron GJL 200. n 10m load length. n 10mm max solids.

Performance: 18

DM100

10 HEAD (M)

DM050

100

150

200

250

300

350

400

FLOW (LPM)

DIMENSIONS & SPECIFICATIONS Part No.

240-DM050

250

120

180

344

239

240-DM050A

250

120

180

344

131

491

240-DM100

280

135

180

369

264

240-DM100A

280

135

180

369

156

516

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

326

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Ultravort Series

ULTRAVORT SERIES VORTEX Part No.

Volts

Amps

Float Switch

Discharge

Max Solid

Code

List Price

240-UV20A

1/5

0.15

230

1.3

Yes

40mm

27mm

$470.00

240-UV30A

1/3

0.25

230

2.5

Yes

40mm

27mm

$535.00

240-UV50A

1/2

0.4

230

3.5

Yes

50mm

35mm

$675.00

240-UV75A

3/4

0.55

230

4.0

Yes

75mm*

35mm

$825.00

240-UV100A

1.0

0.75

230

6.5

Yes

75mm*

37mm

$955.00

240-UV100T

1.0

0.75

400

2.2

75mm*

37mm

$930.00

240-UV100AT

1.0

0.75

400

2.2

Yes

75mm*

37mm

$1225.00

240-UV200A

2.0

1.5

230

Yes

75mm*

40mm

$1405.00

240-UV200T

2.0

1.5

400

3.5

75mm*

40mm

$1350.00

240-UV200AT

2.0

1.5

400

3.5

Yes

75mm*

40mm

$1625.00

The UV series submersible pumps can handle up to 40mm solids and up to 16 meter heads. For emptying sumps, sewerage and effluent transfer and many other grey and black water pumping applications the UV series have been proven over many years to be reliable and dependable in these demanding situations. Features: Double mechanical seals. Non clogging Vortex design. Side Discharge. Float switch or manual operation. Maximum liquid temperature: +40°C. Available in Single or Three phase. UV 20-75 dry motor/UV 100-200 oil filled motor UV20-UV30 - 5m lead. UV50-UV200 - 10m lead. *optional 50mm discharge flange available. n n n n n n n n

UV Series

Performance:

17 16 15 14

UV200

13 12 11

UV100

10 HEAD (M)

UV75

UV50

8 7

UV30

UV20

5 4 3

2 1 0

100

200

300

400

500

600

700

FLOW (LPM)

DIMENSIONS & SPECIFICATIONS Part No.

UV20A

380

196

140

UV30A

380

196

140

UV50A

408

210

157

UV75A

439

261

165

UV100A

439

261

165

UV200A

545

310

200

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

327

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Montents Davies UVI Industrial series

DAVIES UVI INDUSTRIAL PUMP Part No.

Volts

Amps

Float Switch

Discharge

Max Solid

Code

List Price

240-UVI300T

3.0

2.2

400

4.8

80mm

40mm

$2200.00

240-UVI500T

5.0

3.7

400

7.0

80mm

45mm

$2500.00

The Davies UVI Industrial series submersible pumps have an open single channel impeller for dirty water applications allowing flows up to 1300lpm and up to 22m head. Ideal for heavy duty sewerage and effluent transfer, black and grey water sump emptying with up to 45mm solids bypass. Flanged elbow allows discharge direction to be set as required. Rugged cast iron and stainless construction for corrosion resistance and strength. Features: n n n n n n n n

Double mechanical seals. Single channel impeller. Flanged 3” (80mm) elbow discharge.* Max liquid temp 40 degrees. Maximum depth 8m. 10m power lead. User supplied overload. *Optional 4” (100mm) flange available. Suitable for installing with guide rails. 24

16 UVI 500 HEAD (M) 12

UVI 300 8

200

400

600

800

1000

1200

1400

FLOW (LPM)

DIMENSIONS Model

L (mm)

PCD

G (inch)

DSP-30

430

260

186

245

625

525

177

235

265

155

DSP-50

430

260

186

245

655

555

177

235

165

155

1 YEAR WARRANTY Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

328

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Majesto Series

MAJESTO VORTEX SERIES Part No.

Phase

Amps

Volts

Float Switch

Outlet

Code

List Price

240-MV750A

0.75

0.55

230

Yes

40mm

$750.00

240-MV1000A

1.0

0.75

4.8

230

Yes

50mm

$795.00

240-MV1000T

1.0

0.75

2.1

400

50mm

$775.00

240-MV1500A

1.5

1.1

6.5

230

Yes

50mm

$985.00

240-MV1500T

1.5

1.1

2.5

400

50mm

$915.00

240-MV2000T

2.0

1.5

3.5

400

50mm

$1175.00

The Majesto series submersible pumps can handle up to 50mm solids and up to 9 meter heads. For emptying sumps, sewerage and efﬂuent transfer and many other grey a nd black water pumping applications particularly with high solids content. Features: mechanical seals. Stainless steel construction. n Non clogging Vortex design. n Side Discharge. n Float switch or manual operation. n Maximum liquid temperature: +35°C. n Available in Single or Three phase. n 50mm solid passage clearence (MV750A has 35mm). n MV750 - 5m lead. MV1000 - MV2000 - 10m lead. n Double

All Stainless Steel Construction

n 304

Performance:

MV Series

12 11 10 9

MV2000

8 7

MV1500

HEAD (M) 6

MV1000

MV750

4 3 2 1 0

100

200

300

400

500

600

FLOW (LPM)

DIMENSIONS & SPECIFICATIONS Part No.

DNM

MV750

403

350

193

MV1000

486

112

350

198

MV1500

486

112

350

198

MV2000

486

112

198

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

329

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

LBC Series

LBC CAST IRON CUTTER SERIES Part No.

Phase

Volts

Amps

Float Switch

Outlet

Code

List Price

240-LBC75T

1.0

0.75

400

1.6

50mm

$1150.00

240-LBC215A

2.0

1.5

230

9.7

Yes

50mm

$1750.00

240-LBC315T

2.0

1.5

400

3.7

80mm

$1695.00

Features: n Rugged cast iron construction with cutter type impeller to chop particles for waste water. n Epoxy sealed cable entries. n Quality 410 stainless steel heat treated shaft. n Cast iron impeller with tungsten steel tips incorporated with unique chopper plate to cut fibrous materials. n Lip seal followed by double mechanical seal in oil chamber for exceptional durability. n Maximum submerged depth: 8m. n Maximum liquid temperature: 40°C. n Maximum solids passage allowance – 45mm for all models. n Single and three phase versions must be fitted with external user supplied overload protection with manual reset.

Performance: 20 18 16 14 12 HEAD (M) 10

LBC215/315

8 LBC75

6 4 2 0 0

100

150

200

250

300

350

400

450

500

550

600

650

700

750

448.0mm/17.6in 121mm/4.8in

124mm/4.9in

333mm/1.3in

FLOW (LPM)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

330

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

FGP Series

FGP GRINDER SUBMERSIBLE Part No.

Phase

Volts

Amps

Float Switch

Outlet

Code

List Price

240-FGP100A

1.0

0.75

230

6.0

Yes

32mm

$1350.00

240-FGP201

2.0

1.5

230

11.0

32mm

$2450.00

240-FGP201A

2.0

1.5

230

11.0

Yes

32mm

$2685.00

240-FGP301T

3.0

2.2

400

4.7

32mm

$3250.00

240-FGP501T

5.0

3.7

400

9.0

50mm

$3975.00

$240.00

228-GR200

Guide rail brackets

32/50/65

The Davies Pumps Fighter Grinder Pump is a heavy duty submersible pump designed for use in wastewater applications where there is solids such textiles, plastic or plant material in pumped liquid. The agitator and radial cutter will grind the solids to small particles which are able to be pumped through the semi vortex impeller without blocking pump or pipes. Features: Cast iron construction with grinder mechanism for pumping raw sewerage. n Large solids are effectively cut into very fine particles that can be pumped through small pipes without the risk of blocking. n Double mechanical seal (lower – silicon carbide/silicon carbide, upper-carbon/ceramic) in oil chamber for exceptional durability. n Maximum submerged depth: 8m. n Maximum liquid temperature: 40°C. n Cable length 8mtr. n Radial cutter and cutterring SUS440C : corrosion resistant material, hardened to 55-60 Rockwell C n Specific single phase design for starting torque, torque is five times stronger than General capacitor pump n

*Guide Rail Kits for 201-501 available. Performance:

36 33

27 24 HEAD (M)

FGP501

21 FGP301

FGP201

18 15

FGP100A

12 9

100

150

200

250

300

350

FLOW (LPM)

DIMENSIONS Model No.

270

210

450

300

120

FGP201

128

102

103

230

206

640

445

160

FGP301T

128

102

103

230

206

640

445

160

FGP501T

164

119

125

114

283

239

669

509

186

FGP100A

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

331

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

SUBMERSIBLE PUMPS

Notes

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

332

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

BORE PUMPS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

S3P 3” Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

1Ph Motor

S3P 3” BORE PUMP SET – MOTOR, WET END & CONTROL BOX – SINGLE PHASE Part No.

Volts

Amps

Code

List Price

241-S3P-2/15MK

0.5

0.37

230

4.0

$1420.00

241-S3P-2/23MK

0.75

0.55

230

5.1

$1635.00

241-S3P-2/30MK

1.0

0.75

230

6.2

$1980.00

241-S3P-2/45MK

1.5

1.1

230

8.5

$2150.00 3Ph Motor

S3P 3” BORE PUMP SET – MOTOR & WET END– THREE PHASE Part No.

Volts

Amps

Code

List Price

241-S3P-2/15TK

0.5

0.37

400

2.0

$1300.00

241-S3P-2/23TK

0.75

0.55

400

2.1

$1505.00

241-S3P-2/30TK

1.0

0.75

400

2.5

$1840.00

241-S3P-2/45TK

1.5

1.1

400

3.2

$2000.00

The S3P series 3” bore pumps feature a stainless steel outer shell wet end with Noryl impellers and diffusers, brass motor coupling flange and discharge head and an incorporated non-return check valve. Single phase supplied complete with surface mounted control box which incorporates: Run capacitor, isolator switch and manual reset overload. 3 phase user supplied contacter and overload. Pump Features: ■ Max pump OD: 74mm. ■ Max water temperature: 35°C, pH6.5-8.0.

Motor Features: ■ Max thrust: 1500N. ■ IP68 motor protection. ■ Insulation: Class F. ■ Service factor: S1. ■ Minimum cooling speed: 8cm/s. ■ RPM: 2800. ■ Dielectric Oil Filled. ■ Exterior Shell and clamping system: AISI 304. ■ Upper bracket: Pressed brass. ■ Spline shaft to NEMA standards. ■ Maximum starts per hour: 30. ■ Maximum immersion: 60m. ■ 1.8M lead, sealed to motor.

Dimensions and weight Model

Pump Wgt (Kg)

1P Motor Wgt (Kg)

3P Motor Wgt (Kg)

Discharge (mm)

S3P-2/15

580

3.3

377

S3P-2/23

780

4.4

397

6.4

6.1

S3P-2/30

1000

5.6

416

6.8

6.4

S3P-2/45

1380

7.6

477

8.6

6.8

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

334

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

S3P 3” Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

S3P Series Performance Data

140 130 120

S3P-2/45

110 100 90 HEAD (M)

S3P-2/30

70 60

S3P-2/23

50 40

S3P-2/15

30 20 10 0 0

FLOW (LPM) S3P 3” BORE PUMP – WET END ONLY Part No.

Stage

Code

List Price

241-S3P-2/15

0.5

0.37

$525.00

241-S3P-2/23

0.75

0.55

$655.00

241-S3P-2/30

1.0

0.75

$895.00

241-S3P-2/45

1.5

1.1

$985.00

S3P 3” BORE PUMP – MOTOR ONLY - SINGLE PHASE Part No.

Volts

Amps

Code

List Price

241-MP3M-050

0.5

0.37

230

4.0

$775.00

241-MP3M-075

0.75

0.55

230

5.1

$850.00

241-MP3M-100

1.0

0.75

230

6.2

$945.00

241-MP3M-150

1.5

1.1

230

8.5

$1015.00

S3P 3” BORE PUMP – MOTOR ONLY - THREE PHASE Hp

Volts

Amps

Code

List Price

241-MP3T-050

Part No.

0.5

0.37

400

2.0

$775.00

241-MP3T-075

0.75

0.55

400

2.1

$850.00

241-MP3T-100

1.0

0.75

400

2.5

$945.00

241-MP3T-150

1.5

1.1

400

3.2

$1015.00

Code

List Price

S3P 3” BORE PUMP Control box – Single phase Part No.

Capacitor

241-Q16-6

0.5

0.37

$120.00

241-Q20-6

0.75

0.55

$130.00

241-Q25-8

1.0

0.75

$140.00

241-Q35-12

1.5

1.1

$150.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

335

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS 4” Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

DAVIES DRS 4”SUBMERSIBLE BORE PUMPS The Davies DR series bore hole pumps have been developed using state-of-the-art design and manufacturing technology to achieve the highest standard of energy efficiency. The rugged construction using corrosion and abrasion resistant stainless steel ensures long term durability and service life.

Pump Features: ■ Full 304 stainless steel construction (except shaft-431). ■ Heavy duty outlet head with Integral check valve. ■ NEMA standard motor mount flange and spline. ■ Stainless steel inlet strainer. ■ Max Sand content: 50g/m3.

Motor Features: ■ Non-toxic Oil Filled. ■ Removable waterproof cable connector. ■ Single Phase 230v version available in 2 wire and 3 wire configurations. 2 wire motors have in-built capacitor and overload. 3 wire motors require surface mounted capacitor and overlaod control box. ■ Three Phase 400v version requires surface mounted overload. ■ 0.37-4.0Kw 230v Single phase 50Hz. ■ 0.37-7.5Kw 400v Three Phase 50Hz.

Motor Operating Parameters: ■ Max voltage variation: +10% / -10%. ■ Maximum starts per Hour: 40. ■ Maximum water temperature: 40ºC. ■ Minimum flow rate: 0.2m/sec (motor cooling). ■ Axial thrust limits: 0.37-1.5Kw: 2000N, 2.2Kw: 3000N 3.0-7.5Kw: 5000N. ■ Maximum submerged depth: 200m.

MATERIAL SPECIFICATION-4” PUMPS Position

Components

Material

Discharge

0.55

304

Diffuser

Stainless Steel

304

Impeller

Stainless Steel

304

Split Cone

Stainless Steel

304

Split Cone Nut

Stainless Steel

304

Stop Ring

Stainless Steel

304

Neck Ring Retainer

Carbon/ Graphite/PTFE

Strainer

Stainless Steel

304

Suction Interconnector

Stainless Steel

304

Pump Shaft

Stainless Steel

304

Coupling

Stainless Steel

304

Strap

Stainless Steel

304

Cable Guard

Stainless Steel

304

Neck Ring

SUS304+NBR

Nut

Stainless Steel

Bearing

NBR

Standard

16 03

05 04 14 02 06

10 07 12

08 09

15 11

304

*AISI 316 stainless steel pumps are available on request

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

336

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS 4” Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

QUICK SELECTION PERFORMANCE TABLE Model

M3 Stag- /H es L/M

0.37

0.3

0.6

0.9

1.2

1.5

1.8

2.1

2.4

2.7

3.0

3.6

4.2

4.8

5.4

6.0

7.2

8.4

9.6

10.8

100

120

140

160

180

200

250

300

DRS-1/09

0.5

DRS-1/18

0.75 0.55 18

102 96

DRS-1/28

1.0

0.75 28

158 153 138 111 78

238 235 203 167 118 67

DRS-1/42

1.5

1.1

DRS-2/09

0.5

0.37

9 H (m)

DRS-2/13

0.75 0.55 13

DRS-2/18

1.0

0.75 18

104

DRS-2/23

1.5

1.1

136

124 118 108 98

DRS-2/28

2.0

1.5

166

154 145 134 122 105 86

DRS-2/33

2.0

1.5

195

183 173 159 143 124 102

DRS-2/40

3.0

2.2

235

218 205 190 170 147 119

DRS-3/06

0.5

0.37 6

DRS-3/09

0.75 0.55 9

DRS-3/12

1.0

DRS-3/15

1.5

DRS-3/18 DRS-3/22

0.75 12

1.1

1.5

1.1

116

101 97

2.0

1.5

143

127 120 115 110 105 97

DRS-3/25

2.0

1.5

160

139 134 128 124 117 110 90

DRS-3/29

3.0

2.2

DRS-3/33

3.0

2.2

H 185 (m) 211

DRS-4/04

0.5

0.37 4

DRS-4/06

0.75 0.55 6

DRS-4/08

1.0

0.75 8

DRS-4/12

1.5

1.1

DRS-4/17

2.0

1.5

108

DRS-4/21

3.0

2.2

DRS-4/25

3.0

2.2

H 134 (m) 157

DRS-4/33

4.0

3.0

209

DRS-8/05

1.0

0.75

DRS-8/07

1.5

1.1

DRS-8/10

2.0

1.5

DRS-8/12

3.0

2.2

DRS-8/15

3.0

2.2

DRS-8/18

4.0

3.0

DRS-12/05

2.0

1.5

H 104 (m) 33

DRS-12/07

3.0

2.2

DRS-12/10

4.0

3.0

H (m)

160 155 149 143 136 127 103 70 183 177 172 164 155 145 118 80 22

118 115 113 111 108 103 96

138 136 133 129 127 121 113 103 90

184 180 176 172 168 159 149 137 123 105

DRS-12/13

5.5

4.0

DRS-12/18

7.5

5.5

117

111 108 104 102 97

DRS-12/25

10.0 7.5

163

154 149 145 141 135 129 107 75

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

337

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS-1 Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

No Motor

DAVIES DRS-1 SERIES 4” WET END ONLY Part No.

Outlet

Code

List Price

241-DRS-1/09

0.5

0.37

1¼”

$690.00

241-DRS-1/18

0.75

0.55

1¼”

$825.00

241-DRS-1/28

1.0

0.75

1¼”

$1075.00

241-DRS-1/42

1.5

1.1

1¼”

$1725.00

1Ph Motor 2 Wire

DAVIES DRS-1 SERIES 4” WITH SINGLE PHASE MOTOR - 2 WIRE Part No.

1 m3/h

Outlet

Code

List Price

241-DRS-1/09K2

0.5

0.37

1¼”

$1130.00

241-DRS-1/18K2

0.75

0.55

1¼”

$1305.00

241-DRS-1/28K2

1.0

0.75

1¼”

$1705.00

241-DRS-1/42K2

1.5

1.1

1¼”

$2415.00

2 wire motor and pump set (motor has in-built capacitor and overload) no surface mounted control box is required.

1Ph Motor 3 Wire

DAVIES DRS-1 SERIES 4” WITH SINGLE PHASE MOTOR - 3 WIRE PSC Part No.

Outlet

Code

List Price

241-DRS-1/09K3

0.5

0.37

1¼”

$1305.00

241-DRS-1/18K3

0.75

0.55

1¼”

$1490.00

241-DRS-1/28K3

1.0

0.75

1¼”

$1790.00

241-DRS-1/42K3

1.5

1.1

1¼”

$2510.00

3 wire motor and pump set with PSC control box (control box contains run capacitor and overload).

1Ph Motor 3 Wire

DAVIES DRS-1 SERIES 4” WITH SINGLE PHASE MOTOR - 3 WIRE CSCR Part No.

Outlet

Code

List Price

241-DRS-1/42K4

1.5

1.1

1¼”

$2465.00

3 wire motor and pump set with CSCR control box for higher starting power (control box contains run and start capacitor, start relay and overload).

3Ph Motor

DAVIES DRS-1 SERIES 4” WITH THREE PHASE MOTOR Part No.

Outlet

Code

List Price

241-DRS-1/09K5

0.5

0.37

1¼”

$1205.00

241-DRS-1/18K5

0.75

0.55

1¼”

$1360.00

241-DRS-1/28K5

1.0

0.75

1¼”

$1650.00

241-DRS-1/42K5

1.5

1.1

1¼”

$2400.00

3 wire motor and pump set (surface mounted overload required - not supplied with set).

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

338

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS-1 Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

DRS-1 Performance Data

DRS-1 260 240

DRS-1/42

220 200 180 160

HEAD (M)

DRS-1/28

140

DRS-1/42

120

DRS-1/28 DRS-1/18

100

DRS-1/09

DRS-1/18

80 60

DRS-1/09

40 20 0

FLOW (LPM)

40 30 Eff(%) 20 Efficiency

10 0

FLOW (LPM)

C B

Model No.

Dimensions and weight (excluding motor) A

DRS-1/09

356

1¼

2.9

DRS-1/18

545

1¼

4.4

DRS-1/28

755

1¼

6.2

DRS-1/42

1072

1¼

11.3

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

339

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS-2 Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

No Motor

DAVIES DRS-2 SERIES 4” WET END ONLY Part No.

Outlet

Code

List Price

241-DRS-2/09

0.5

0.37

1¼”

$690.00

241-DRS-2/13

0.75

0.55

1¼”

$750.00

241-DRS-2/18

1.0

0.75

1¼”

$825.00

241-DRS-2/23

1.5

1.1

1¼”

$975.00

241-DRS-2/28

2.0

1.5

1¼”

$1075.00

241-DRS-2/33

2.0

1.5

1¼”

$1425.00

241-DRS-2/40

3.0

2.2

1¼”

$1725.00 1Ph Motor 2 Wire

DAVIES DRS-2 SERIES 4” WITH SINGLE PHASE MOTOR - 2 WIRE Part No.

2 m3/h

Outlet

Code

List Price

241-DRS-2/09K2

0.5

0.37

1¼”

$1130.00

241-DRS-2/13K2

0.75

0.55

1¼”

$1230.00

241-DRS-2/18K2

1.0

0.75

1¼”

$1455.00

241-DRS-2/23K2

1.5

1.1

1¼”

$1665.00

241-DRS-2/28K2

2.0

1.5

1¼”

$1855.00

241-DRS-2/33K2

2.0

1.5

1¼”

$2205.00

2 wire motor and pump set (motor has in-built capacitor and overload) no surface mounted control box is required. 1Ph Motor 3 Wire

DAVIES DRS-2 SERIES 4” WITH SINGLE PHASE MOTOR - 3 WIRE PSC Part No.

Outlet

Code

List Price

241-DRS-2/09K3

0.5

0.37

1¼”

$1305.00

241-DRS-2/13K3

0.75

0.55

1¼”

$1415.00

241-DRS-2/18K3

1.0

0.75

1¼”

$1540.00

241-DRS-2/23K3

1.5

1.1

1¼”

$1760.00

241-DRS-2/28K3

2.0

1.5

1¼”

$2020.00

241-DRS-2/33K3

2.0

1.5

1¼”

$2370.00

241-DRS-2/40K3

3.0

2.2

1¼”

$2790.00

3 wire motor and pump set with PSC control box (control box contains run capacitor and overload). 1Ph Motor 3 Wire

DAVIES DRS-2 SERIES 4” WITH SINGLE PHASE MOTOR - 3 WIRE CSCR Part No.

Outlet

Code

List Price

241-DRS-2/23K4

1.5

1.1

1¼”

$1895.00

241-DRS-2/28K4

2.0

1.5

1¼”

$2180.00

241-DRS-2/33K4

2.0

1.5

1¼”

$2530.00

241-DRS-2/40K4

3.0

2.2

1¼”

$2988.00

3 wire motor and pump set with CSCR control box for higher starting power (control box contains run and start capacitor, start relay and overload). 3Ph Motor

DAVIES DRS-2 SERIES 4” WITH THREE PHASE MOTOR Part No.

Outlet

Code

List Price

241-DRS-2/09K5

0.5

0.37

1¼”

$1205.00

241-DRS-2/13K5

0.75

0.55

1¼”

$1285.00

241-DRS-2/18K5

1.0

0.75

1¼”

$1400.00

241-DRS-2/23K5

1.5

1.1

1¼”

$1650.00

241-DRS-2/28K5

2.0

1.5

1¼”

$1800.00

241-DRS-2/33K5

2.0

1.5

1¼”

$2150.00

241-DRS-2/40K5

3.0

2.2

1¼”

$2610.00

3 wire motor and pump set (surface mounted overload required - not supplied with set). Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

340

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS-2 Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

DRS-2 Performance Data

DRS-2

240 220

DRS-2/40

200

DRS-2/33

180 160

DRS-2/28 140

DRS-2/23 HEAD (M) 120

100

DRS-2/18 80

DRS-2/13

DRS-2/09 40 20 0

FLOW (LPM)

60 50 40 Eff(%) 30 20

10 0

20 25 FLOW (LPM)

Model No.

Dimensions and weight (excluding motor)

DRS-2/09

356

1¼

3.0

DRS-2/13

440

1¼

3.8

DRS-2/18

545

1¼

4.7

DRS-2/23

650

1¼

5.7

DRS-2/28

755

1¼

6.6

DRS-2/33

883

1¼

9.7

DRS-2/40

1030

1¼

11.5

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

341

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS-3 Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

No Motor

DAVIES DRS-3 SERIES 4” WET END ONLY Part No.

241-DRS-3/06 241-DRS-3/09 241-DRS-3/12 241-DRS-3/15 241-DRS-3/18 241-DRS-3/22 241-DRS-3/25 241-DRS-3/29 241-DRS-3/33

Outlet

Code

List Price

0.5 0.75 1.0 1.5 1.5 2.0 2.0 3.0 3.0

0.37 0.55 0.75 1.1 1.1 1.5 1.5 2.2 2.2

1¼” 1¼” 1¼” 1¼” 1¼” 1¼” 1¼” 1¼” 1¼”

D D D D D D D D D

$590.00 $690.00 $725.00 $775.00 $825.00 $875.00 $975.00 $1085.00 $1425.00 1Ph Motor 2 Wire

DAVIES DRS-3 SERIES 4” WITH SINGLE PHASE MOTOR - 2 WIRE Part No.

241-DRS-3/06K2 241-DRS-3/09K2 241-DRS-3/12K2 241-DRS-3/15K2 241-DRS-3/18K2 241-DRS-3/22K2 241-DRS-3/25K2

3 m3/h

Outlet

Code

List Price

0.5 0.75 1.0 1.5 1.5 2.0 2.0

0.37 0.55 0.75 1.1 1.1 1.5 1.5

1¼” 1¼” 1¼” 1¼” 1¼” 1¼” 1¼”

D D D D D D D

$1030.00 $1170.00 $1355.00 $1465.00 $1515.00 $1655.00 $1755.00

2 wire motor and pump set (motor has in-built capacitor and overload) no surface mounted control box is required. 1Ph Motor 3 Wire

DAVIES DRS-3 SERIES 4” WITH SINGLE PHASE MOTOR - 3 WIRE PSC Part No.

241-DRS-3/06K3 241-DRS-3/09K3 241-DRS-3/12K3 241-DRS-3/15K3 241-DRS-3/18K3 241-DRS-3/22K3 241-DRS-3/25K3 241-DRS-3/29K3 241-DRS-3/33K3

Outlet

Code

List Price

0.5 0.75 1.0 1.5 1.5 2.0 2.0 3.0 3.0

0.37 0.55 0.75 1.1 1.1 1.5 1.5 2.2 2.2

1¼” 1¼” 1¼” 1¼” 1¼” 1¼” 1¼” 1¼” 1¼”

D D D D D D D D D

$1205.00 $135500 $1440.00 $1560.00 $1610.00 $1820.00 $1920.00 $2150.00 $2490.00

3 wire motor and pump set with PSC control box (control box contains run capacitor and overload). 1Ph Motor 3 Wire

DAVIES DRS-3 SERIES 4” WITH SINGLE PHASE MOTOR - 3 WIRE CSCR Part No.

241-DRS-3/15K4 241-DRS-3/18K4 241-DRS-3/22K4 241-DRS-3/25K4 241-DRS-3/29K4 241-DRS-3/33K4

Outlet

Code

List Price

1.5 1.5 2.0 2.0 3.0 3.0

1.1 1.1 1.5 1.5 2.2 2.2

1¼” 1¼” 1¼” 1¼” 1¼” 1¼”

D D D D D D

$1695.00 $1745.00 $1980.00 $2080.00 $2348.00 $2688.00

3 wire motor and pump set with CSCR control box for higher starting power (control box contains run and start capacitor, start relay and overload).

3Ph Motor

DAVIES DRS-3 SERIES 4” WITH THREE PHASE MOTOR Part No.

241-DRS-3/06K5 241-DRS-3/09K5 241-DRS-3/12K5 241-DRS-3/15K5 241-DRS-3/18K5 241-DRS-3/22K5 241-DRS-3/25K5 241-DRS-3/29K5 241-DRS-3/33K5

Outlet

Code

List Price

0.5 0.75 1.0 1.5 1.5 2.0 2.0 3.0 3.0

0.37 0.55 0.75 1.1 1.1 1.5 1.5 2.2 2.2

1¼” 1¼” 1¼” 1¼” 1¼” 1¼” 1¼” 1¼” 1¼”

D D D D D D D D D

$1105.00 $1225.00 $1300.00 $1450.00 $1500.00 $1600.00 $1700.00 $1970.00 $2310.00

342

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS-3 Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

DRS-3 Performance Data

DRS-3

200

DRS-3/33

180 160

DRS-3/29

140

DRS-3/25 DRS-3/22

120

DRS-3/18

HEAD (M) 100

DRS-3/15

DRS-3/12

DRS-3/09

DRS-3/06 20 0

FLOW (LPM)

60 50 Eff(%) 40 30 20 0

35 40 45 FLOW (LPM)

Model No.

Dimensions and weight (excluding motor)

DRS-3/06

293

1¼”

2.4

DRS-3/09

356

1¼”

3.0

DRS-3/12

419

1¼”

3.6

DRS-3/15

482

1¼”

4.2

DRS-3/18

545

1¼”

4.7

DRS-3/22

629

1¼”

5.5

DRS-3/25

692

1¼”

6.1

DRS-3/29

776

1¼”

6.8

DRS-3/33

883

1¼”

9.7

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

343

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS-4 Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

No Motor

DAVIES DRS-4 SERIES 4” WET END ONLY Part No.

Outlet

Code

List Price

241-DRS-4/04

0.5

0.37

1¼”

$505.00

241-DRS-4/06

0.75

0.55

1¼”

$590.00

241-DRS-4/08

1.0

0.75

1¼”

$675.00

241-DRS-4/12

1.5

1.1

1¼”

$725.00

241-DRS-4/17

2.0

1.5

1¼”

$795.00

241-DRS-4/21

3.0

2.2

1¼”

$850.00

241-DRS-4/25

3.0

2.2

1¼”

$975.00

241-DRS-4/33

4.0

3.0

1¼”

$1425.00 1Ph Motor 2 Wire

DAVIES DRS-4 SERIES 4” WITH SINGLE PHASE MOTOR - 2 WIRE Part No.

4 m3/h

Outlet

Code

List Price

241-DRS-4/04K2

0.5

0.37

1½”

$945.00

241-DRS-4/06K2

0.75

0.55

1½”

$1070.00

241-DRS-4/08K2

1.0

0.75

1½”

$1305.00

241-DRS-4/12K2

1.5

1.1

1½”

$1415.00

241-DRS-4/17K2

2.0

1.5

1½”

$1575.00

2 wire motor and pump set (motor has in-built capacitor and overload) no surface mounted control box is required. 1Ph Motor 3 Wire

DAVIES DRS-4 SERIES 4” WITH SINGLE PHASE MOTOR - 3 WIRE PSC Part No.

Outlet

Code

List Price

241-DRS-4/04K3

0.5

0.37

1½”

$1120.00

241-DRS-4/06K3

0.75

0.55

1½”

$1255.00

241-DRS-4/08K3

1.0

0.75

1½”

$1390.00

241-DRS-4/12K3

1.5

1.1

1½”

$1520.00

241-DRS-4/17K3

2.0

1.5

1½”

$1740.00

241-DRS-4/21K3

3.0

2.2

1½”

$1915.00

241-DRS-4/25K3

3.0

2.2

1½”

$2040.00

3 wire motor and pump set with PSC control box (control box contains run capacitor and overload). 1Ph Motor 3 Wire

DAVIES DRS-4 SERIES 4” WITH SINGLE PHASE MOTOR - 3 WIRE CSCR Part No.

Outlet

Code

List Price

241-DRS-4/12K4

1.5

1.1

1½”

$1645.00

241-DRS-4/17K4

2.0

1.5

1½”

$1900.00

241-DRS-4/21K4

3.0

2.2

1½”

$2113.00

241-DRS-4/25K4

3.0

2.2

1½”

$2238.00

241-DRS-4/33K4

4.0

3.0

1½”

$3287.00

3 wire motor and pump set with CSCR control box for higher starting power (control box contains run and start capacitor, start relay and overload).

3Ph Motor

DAVIES DRS-4 SERIES 4” WITH THREE PHASE MOTOR Part No.

Outlet

Code

List Price

$1020.00

241-DRS-4/04K5

0.5

0.37

1½”

241-DRS-4/06K5

0.75

0.55

1½”

$1125.00

241-DRS-4/08K5

1.0

0.75

1½”

$1250.00

241-DRS-4/12K5

1.5

1.1

1½”

$1400.00

241-DRS-4/17K5

2.0

1.5

1½”

$1520.00

241-DRS-4/21K5

3.0

2.2

1½”

$1735.00

241-DRS-4/25K5

3.0

2.2

1½”

$1860.00

241-DRS-4/33K4

4.0

3.0

1½”

$2600.00

344

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS-4 Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

DRS-4 Performance Data

DRS-4

200

DRS-4/33 180 160 140

DRS-4/25

120

DRS-4/21

HEAD (M) 100

DRS-4/17 80

DRS-4/12

DRS-4/08 40

DRS-4/06 DRS-4/04

20 0

100

110

120

100

110

120

FLOW (LPM)

70 60 Eff(%) 50 40 30 0

60 70 FLOW (LPM)

Model No.

Dimensions and weight (excluding motor)

DRS-4/04

251

1½”

2.0

DRS-4/06

293

1½”

2.4

DRS-4/08

335

1½”

2.8

DRS-4/12

419

1½”

3.6

DRS-4/17

524

1½”

4.5

DRS-4/21

608

1½”

5.3

DRS-4/25

692

1½”

6.0

DRS-4/33

868

1½”

9.6

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

345

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS-8 Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

No Motor

DAVIES DRS-8 SERIES 4” WET END ONLY Part No.

Outlet

Code

List Price

241-DRS-8/05

1.0

0.75

2”

$690.00

241-DRS-8/07

1.5

1.1

2”

$890.00

241-DRS-8/10

2.0

1.5

2”

$1095.00

241-DRS-8/12

3.0

2.2

2”

$1300.00

241-DRS-8/15

3.0

2.2

2”

$1575.00

241-DRS-8/18

4.0

3.0

2”

$1850.00

8 m3/h

1Ph Motor 2 Wire

DAVIES DRS-8 SERIES 4” WITH SINGLE PHASE MOTOR - 2 WIRE Part No.

Outlet

Code

List Price

241-DRS-8/05K2

1.0

0.75

2”

$1320.00

241-DRS-8/07K2

1.5

1.1

2”

$1580.00

241-DRS-8/10K2

2.0

1.5

2”

$1875.00

2 wire motor and pump set (motor has in-built capacitor and overload) no surface mounted control box is required.

1Ph Motor 3 Wire

DAVIES DRS-8 SERIES 4” WITH SINGLE PHASE MOTOR - 3 WIRE PSC Part No.

Outlet

Code

List Price

241-DRS-8/05K3

1.0

0.75

2”

$1405.00

241-DRS-8/07K3

1.5

1.1

2”

$1675.00

241-DRS-8/10K3

2.0

1.5

2”

$2040.00

241-DRS-8/12K3

3.0

2.2

2”

$2365.00

241-DRS-8/15K3

3.0

2.2

2”

$2640.00

3 wire motor and pump set with PSC control box (control box contains run capacitor and overload).

1Ph Motor 3 Wire

DAVIES DRS-8 SERIES 4” WITH SINGLE PHASE MOTOR - 3 WIRE CSCR Part No.

Outlet

Code

List Price

241-DRS-8/07K4

1.5

1.1

2”

$1810.00

241-DRS-8/10K4

2.0

1.5

2”

$2200.00

241-DRS-8/12K4

3.0

2.2

2”

$2565.00

241-DRS-8/15K4

3.0

2.2

2”

$2840.00

241-DRS-8/18K4

4.0

3.0

2”

$3715.00

3 wire motor and pump set with CSCR control box for higher starting power (control box contains run and start capacitor, start relay and overload). 3Ph Motor

DAVIES DRS-8 SERIES 4” WITH THREE PHASE MOTOR Part No.

Outlet

Code

List Price

241-DRS-8/05K5

1.0

0.75

2”

$1265.00

241-DRS-8/07K5

1.5

1.1

2”

$1565.00

241-DRS-8/10K5

2.0

1.5

2”

$1820.00

241-DRS-8/12K5

3.0

2.2

2”

$2185.00

241-DRS-8/15K5

3.0

2.2

2”

$2460.00

241-DRS-8/18K5

4.0

3.0

2”

$3025.00

346

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS-8 Series MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

DRS-8 Performance Data

DRS-8

110 100

DRS-8/18 90

DRS-8/15

80 70

DRS-8/12

60 HEAD (M)

DRS-8/10

50 40

DRS-8/07 30

DRS-8/05 20 10 0

100

120

140

160

180

200

100 120 FLOW (LPM)

140

160

180

200

FLOW (LPM)

70 60 50 Eff(%)

40 30 20 20

Model No.

Dimensions and weight (excluding motor)

DRS-8/05

412

1½”

4.3

DRS-8/07

496

1½”

5.3

DRS-8/10

622

1½”

6.8

DRS-8/12

706

1½”

7.8

DRS-8/15

832

1½”

9.3

DRS-8/18

958

1½”

10.8

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

347

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS-12 MiniBlazeSeries & Blazemaster - Loncin Engine

BORE PUMPS

No Motor

DAVIES DRS-12 SERIES 4” WET END ONLY Part No.

Outlet

Code

List Price

241-DRS-12/05

2.0

1.5

2”

$890.00

241-DRS-12/07

3.0

2.2

2”

$1050.00

241-DRS-12/10

4.0

3.0

2”

$1350.00

241-DRS-12/13

5.5

4.0

2”

$1650.00

241-DRS-12/18

7.5

5.5

2”

$2050.00

241-DRS-12/25

10.0

7.5

2”

$2350.00

12 m3/h

1Ph Motor 2 Wire

DAVIES DRS-12 SERIES 4” WITH SINGLE PHASE MOTOR - 2 WIRE Part No.

Outlet

Code

List Price

241-DRS-12/05K2

2.0

1.5

2”

$1670.00

2 wire motor and pump set (motor has in-built capacitor and overload) no surface mounted control box is required.

1Ph Motor 3 Wire

DAVIES DRS-12 SERIES 4” WITH SINGLE PHASE MOTOR - 3 WIRE PSC Part No.

Outlet

Code

List Price

241-DRS-12/05K3

2.0

1.5

2”

$1835.00

241-DRS-12/07K3

3.0

2.2

2”

$2115.00

3 wire motor and pump set with PSC control box (control box contains run capacitor and overload).

1Ph Motor 3 Wire

DAVIES DRS-12 SERIES 4” WITH SINGLE PHASE MOTOR - 3 WIRE CSCR Part No.

Outlet

Code

List Price

241-DRS-12/05K4

2.0

1.5

2”

$1995.00

241-DRS-12/07K4

3.0

2.2

2”

$2315.00

241-DRS-12/10K4

4.0

3.0

2”

$3215.00

241-DRS-12/13K4

5.0

3.7

2”

$3872.00

3 wire motor and pump set with CSCR control box for higher starting power (control box contains run and start capacitor, start relay and overload).

3Ph Motor

DAVIES DRS-12 SERIES 4” WITH THREE PHASE MOTOR Part No.

Outlet

Code

List Price

241-DRS-12/05K5

2.0

1.5

2”

$1615.00

241-DRS-12/07K5

3.0

2.2

2”

$1935.00

241-DRS-12/10K5

4.0

3.0

2”

$2525.00

241-DRS-12/13K5

5.5

4.0

2”

$3005.00

241-DRS-12/18K5

7.5

5.5

2”

$3710.00

241-DRS-12/25K5

10.0

7.5

2”

$4295.00

3 wire motor and pump set (surface mounted overload required - not supplied with set).

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

348

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DRS-12 MiniBlazeSeries & Blazemaster - Loncin Engine

BORE PUMPS

DRS-12 Performance Data

DRS-12

170 160

DRS-12/25

150 140 130 120

DRS-12/18

110 100 HEAD (M)

90 80

DRS-12/13

DRS-12/10

60 50

DRS-12/07

DRS-12/05

30 20 10 0

100 120 140 160 180 200 220 240 260 280 300 320 FLOW (LPM)

70 60 50 Eff(%) 40 30 20 0

Dimensions and weight (excluding motor) Model No.

100 120 140 160 180 200 220 240 260 280 300 320 FLOW (LPM)

DRS-12/05

505

2”

5.0

DRS-12/07

635

2”

6.3

DRS-12/10

830

2”

8.2

DRS-12/13

1025

2”

10.2

DRS-12/18

1350

2”

13.4

DRS-12/25

1805

2”

17.8

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

349

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DR 4” Submersible Motors MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

1Ph Motor 2 Wire

DAVIES DRM 4” 50 HZ 1PH 230V SUBMERSIBLE MOTORS - 2 WIRE Model No.

RPM

Volts

Run AMPS

Start AMPS

Thrust Load

Capacitor MFD

Type

Code

List Price

241-DRM400502

0.5

0.37

2840

230

3.7

2000N

2 wire

$440.00

241-DRM400752

0.75

0.55

2840

230

5.0

2000N

2 wire

$480.00

241-DRM401002

1.0

0.75

2840

230

6.2

2000N

2 wire

$630.00

241-DRM401502

1.5

1.1

2840

230

8.1

2000N

2 wire

$690.00

241-DRM402002

2.0

1.5

2840

230

10.4

2000N

2 wire

$780.00

2 wire submersible motor (built-in capacitor and overload). 1Ph Motor 3 Wire

DAVIES DRM 4” 50 HZ 1PH 230V SUBMERSIBLE MOTORS - 3 WIRE Model No.

RPM

Volts

Run AMPS

Start AMPS

Thrust Load

Capacitor MFD

Type

Code

List Price

241-DRM400503

0.5

0.37

2840

230

3.7

2000N

3 wire

$515.00

241-DRM400753

0.75

0.55

2840

230

5.0

2000N

3 wire

$558.00

241-DRM401003

1.0

0.75

2840

230

6.2

2000N

3 wire

$598.00

241-DRM401503

1.5

1.1

2840

230

8.1

2000N

3 wire

$662.00

241-DRM402003

2.0

1.5

2840

230

10.4

2000N

3 wire

$820.00

241-DRM403003

3.0

2.2

2840

230

3000N

3 wire

$925.00

241-DRM404003

4.0

3.0

2840

230

22.7

5000N

3 wire

$1498.00

241-DRM405003

5.0

3.7

2840

230

5000N

3 wire

$1735.00

3 wire submersible motor (requires surface mounted control box with capacitor and overload).

DAVIES DRT 4” 50 HZ 3PH 400V SUBMERSIBLE MOTORS Model No.

RPM

Volts

Run AMPS

Start AMPS

Thrust Load

Type

Code

List Price

241-DRT400503

0.5

0.37

2870

400

1.6

4.5

2000N

DOL

$515.00

241-DRT400753

0.75

0.55

2850

400

1.9

6.7

2000N

DOL

$535.00

241-DRT401003

1.0

0.75

2840

400

2.3

8.9

2000N

DOL

$575.00

241-DRT401503

1.5

1.1

2850

400

3.1

2000N

DOL

$672.00

241-DRT402003

2.0

1.5

2850

400

4.0

2000N

DOL

$725.00

241-DRT403003

3.0

2.2

2850

400

5.6

3000N

DOL

$882.00

241-DRT404003

4.0

3.0

2850

400

7.4

5000N

DOL

$1175.00

241-DRT405503

5.5

4.0

2850

400

9.8

5000N

DOL

$1355.00

241-DRT407503

7.5

5.5

2850

400

13.7

5000N

DOL

$1660.00

241-DRT410003

10.0

7.5

2850

400

18.7

5000N

DOL

$1945.00

400v three phase submersible motor (requires user supplied overload).

DAVIES DRT 4” 50HZ 3PH 230V SUBMERSIBLE MOTOR Model No.

241-DRP400503

RPM

Volts

Run AMPS

Start AMPS

Thrust Load

Type

Code

List Price

0.5

0.37

2830

230

2.8

7.8

2000N

DOL

$515.00

241-DRP401003

1.0

0.75

2830

230

4.0

2000N

DOL

$575.00

241-DRP401503

1.5

1.1

2840

230

5.4

2000N

DOL

$672.00

241-DRP403003

3.0

2.2

2840

230

9.7

2000N

DOL

$882.00

230v three phase submersible motor (requires user supplied overload).

Argon recommends using a Pump Control panel to protect your system. see page 412-413

*Motor not supplied with jointing kit - see accessories on page 339 Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

350

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

DCB Control Boxes MiniBlaze & Blazemaster - Loncin Engine

BORE PUMPS

CONTROL BOXES FOR 1PH - 3 WIRE MOTORS - PSC TYPE Model No.

Volts

Capacitor

O/L

Code

LIST PRICE

241-DCB0051

0.5

0.37

230

$95.00

241-DCB0071

0.75

0.55

230

$105.00

241-DCB0101

1.0

0.75

230

$115.00

241-DCB0151

1.5

1.1

230

$120.00

241-DCB0201

2.0

1.5

230

11A

$125.00

241-DCB0301

3.0

2.2

230

16A

$140.00

Includes: IP55 Enclosure, Run capacitor Manual reset overload, Illuminated on/off rocker switch.

CONTROL BOXES FOR 1PH - 3 WIRE MOTORS - CSCR TYPE Hp

Volts

Capacitor Run/Start

O/L

Code

LIST PRICE

241-DCB2152

1.5

1.1

230

35/125

$255.00

241-DCB2202

2.0

1.5

230

40/200

11A

$285.00

241-DCB2302

3.0

2.2

230

55/300

16A

$338.00

241-DCB2402

4.0

3.0

230

70/400

26A

$412.00

241-DCB2552

5.5

4.0

230

85/400

35A

$482.00

Model No.

Includes: IP23 Metal enclosure, Start & Run capacitor, Start Relay, manual reset overload.

Dimension and Weight Single phase - 2 & 3 wire motors Model No.

Cable

346

7.3

1.5mm2 x 1.7m

DRM40075-2/3

365

8.2

1.5mm2 x 1.7m

DRM40100-2/3

380

8.8

1.5mm2 x 1.7m

DRM40150-2/3

405

10.0

1.5mm2 x 1.7m

DRM40200-2/3

440

11.5

1.5mm2 x 1.7m

DRM403003

495

14.0

1.5mm2 x 2.5m

DRM404003

607

19.4

1.5mm2 x 2.5m

DRM405003

683

22.7

2.0mm2 x 2.5m

DRM40050-2/3

Dimension and Weight Three phase motors H

Cable

DRT400503

Model No.

330

6.7

1.5mm2 x 1.7m

DRT400753

346

7.4

1.5mm2 x 1.7m

DRT401003

365

8.2

1.5mm2 x 1.7m

DRT401503

380

8.9

1.5mm2 x 1.7m

DRT402003

405

10.0

1.5mm2 x 1.7m

DRT403003

440

11.6

1.5mm2 x 2.5m

DRT404003

516

15.2

1.5mm2 x 2.5m

DRT405503

607

19.5

1.5mm2 x 2.5m

DRT407503

683

23.1

2.0mm2 x 2.5m

DRT410003

783

27.5

2.0mm2 x 2.5m

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

351

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Bore Pump& Accessories MiniBlaze Blazemaster - Loncin Engine

BORE PUMPS

LEVEL PROBE SINGLE POLE Part No.

228-SONDA SL100 ■ ■

Type

Code

List Price

Single pole

$20.00

Type

Code

List Price

Double pole with lead -1M

$65.00

Diameter: 20mm. Length: 97mm.

LEVEL PROBE DOUBLE POLE Part No.

228-SONDA N100 ■ ■

Diameter: 30mm. Length: 152mm.

LEVEL PROBE CABLE Part No.

Size

Length

Code

List Price

1mm

100M

$300.00

Part No.

Volts

Output relay

Code

List Price

228-SD320-00

230

12A

$195.00

Volts

Output relay

Code

List Price

240

(20A) 8A

$275.00

350-WSE17043

LEVEL PROBE CONTROL

■ ■ ■ ■ ■ ■ ■ ■ ■

35mm DIN Rail mount. Power supply 24V or 230 Vac 50Hz. Low voltage input for 3 level probe control. Adjustable probe sensitivity level. Low voltage input for pressure switch or float switch. Filling or emptying function. Auxiliary circuit protection fuse. Output contact relay capacity: 12A 250V AC. Width: 20mm Height: 90mm. Depth:70mm.

LEVEL PROBE CONTROL PANEL Part No.

228-SQ2

Conﬁg 1.

24v 240v 380v

Min Common

Live

NC com 240v 380v

Live 250v 8A relay

24v

250v 8A relay

com

24v

250v 8A relay

SubMatic PUMP

240v 380v

Neutral

Neutral Max

MAN

LEVEL

Live

com

AUTO

PUMP 9

POWER

MAN

LEVEL 3

AUTO

POWER

PUMP 1

SubMatic

MAN

LEVEL

AUTO

POWER

Conﬁg 3.

Conﬁg 2.

Neutral

Max

Earth

Tank ﬁlling or pressure switch system and dry run control with three probes

Min

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Probes or ﬂoat switches

Earth

Tank ﬁlling or pressure switch system and dry run control with two probes or two ﬂoat switches

352

Tank ﬁlling or pressure switch system and dry run control with ﬂoat switch

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

BORE PUMPS

Bore Pump& Accessories MiniBlaze Blazemaster - Loncin Engine

SAFETY CABLE Part No.

Size

Code

List Price

228-CAX-MM3

3mm

$3.90/M

228-CAX-MM4

4mm

$4.20/M

Suit Cable Size

Code

List Price

3 & 4mm

$4.75

■

316 Stainless steel.

SAFETY CABLE CLAMPS Part No.

228-MOR49X ■

316 Stainless steel.

SAFETY CABLE THIMBLE Part No.

Suit Cable Size

Code

List Price

228-MORA55204

3 & 4mm

$4.25

Cable Size

Code

List Price

228-14164

1.5-2.5mm

$25.00

228-10124

3-6mm

$30.00

Cable Size

Code

List Price

1.5-2.5mm2

$50.00

Cable Size

Code

List Price

5x1.5-6mm2

$75.00

Length

Code

List Price

200m

$720.00

Size

Code

List Price

190mm x 2” BSP

$165.00

■

316 Stainless steel.

JOINTING KIT HEAT SHRINK Part No.

JOINTING KIT CLEAR CAST Part No.

228-CCM0

JOINTING KIT - KING JOINT Part No.

228-KJ-0 ■ ■ ■ ■

Rapid gel filled joint for extruded multi core 0,6/1 kv cables up to 5 cores. Re-enterable. Re-useable. Fully submersible (IP68).

DEPTH FINDER Part No.

228-DMT200

The DMT200 is a portable device for checking water levels in wells and bores. An Audible alarm sounds when water is detected. Cable marked in 100mm increments. BORE CAP Part No.

345-110590

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

353

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

BORE PUMPS

Notes MiniBlaze & Blazemaster - Loncin Engine

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

354

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

WATER FILTRATION

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

355

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

WATER FILTRATION

Slimline Housing 10”

Pentek Slimline Housing 10” Part No.

Inlet/Outlet

Suits

Code

List Price

715-SL10HS30

¾”

Standard 10” cartridge

$77.00

Housing – Polypropylene (opaque) Cap – Reinforced polypropylene O-Ring – Buna-N Temperature Rating– +4.0 to +52°C) Maximum Pressure: 8.6Bar (125PSI) Includes mounting bracket and spanner.

Pleated Cartridge 10” Part No.

Micron

Media

Code

List Price

715-SL10PL01

Polyester

$23.00

715-SL10PL05

Polyester

$17.00

715-SL10PL20

Polypropylene

$17.00

715-SL10PL50

Polyester

$17.00

Specifications: n

100% synthetic filter media Washable pre-filter or primary sediment filter n Cellulose fibres - mildew and rot resistant n

Polyspun Cartridge Standard 10” Part No.

Micron

Media

Code

List Price

715-SL10PS01

Polypropylene

$20.00

715-SL10PS05

Polypropylene

$15.00

715-SL10PS20

Polypropylene

$15.00

715-SL10PS50

Polypropylene

$15.00

Specifications: n Melt

blown polypropylene

Carbon Block Cartridge Standard 10” Part No.

Micron

Chlorine taste & Odour reduction capacity @ flow

Code

List Price

715-SL10CB05

22000L @3.8lpm

$29.00

MATRIKX® CTO® filters are the most widely used carbon block devices in the world and provide previously unattainable performance. MATRIKX® CTO® filters simultaneously remove chlorine taste and odour and organic chemicals that contribute to taste and odour while providing the particulate filtration and dirt-holding capacity of an efficient 5 micron nominal sediment filter. These filters are optimized for applications where they perform the role of both a sediment and activated carbon filter. Carbon Impregnated Pleated NCP Cartridge Standard 10” Part No.

Micron

Media

Code

List Price

715-SL10CP05

Polyester

$55.00

715-SL10CP10

Polyester

$55.00

Pentair® Pentek® NCP Series Cartridges are constructed from a carbon impregnated non cellulose media. They offer sediment filtration, as well as taste, odour and chlorine taste & odour reduction in one cartridge. Unlike cellulose cartridges, NCP Series Cartridges can be used for municipal and non-chlorinated water applications. Pleats provide additional surface area for high dirt loading capacity, while maintaining minimal pressure drop. This combination of a pleated polyester media and carbon filtration produces an outstanding filter cartridge with extended service life. NCP Series Cartridges are excellent polishing filters, closed loop streams and are ideal for post reverse osmosis and well water applications. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

356

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

WATER FILTRATION

BIG BLUE Housing 10”

Pentek BIG BLUE Housing 10” Part No.

Kit

Inlet/Outlet

Suits

Code

List Price

715-BB10HS50

Single

1”

10” Big cartridge

$210.00

715-BB10HT50

Twin

1”

10” Big cartridge

$420.00

Pentair® Pentek® Standard Filter Housings are manufactured of a durable polypropylene material which provides excellent chemical resistance and are ideal for many residential, commercial and industrial applications. n Housing – Polypropylene (opaque) n Cap – Reinforced polypropylene n O-Ring – Buna-N n Temperature Rating– +4.0 to +52°C) n Maximum Pressure: 8.6Bar (125PSI) n Includes mounting bracket and spanner. Pleated Cartridge Big 10” Part No.

Micron

Media

Code

List Price

715-BB10PL01

Polyester

$50.00

715-BB10PL05

Polyester

$45.00

715-BB10PL10

Polypropylene

$45.00

715-BB10PL20

Polypropylene

$45.00

715-BB10PL50

Polyester

$45.00

n n n

100% synthetic filter media Washable pre-filter or primary sediment filter Cellulose fibres - mildew and rot resistant

Polyspun Cartridge Big 10” Part No.

Micron

Media

Code

List Price

715-BB10PS01

Polypropylene

$29.00

715-BB10PS05

Polypropylene

$29.00

715-BB10PS20

Polypropylene

$29.00

715-BB10PS50

Polypropylene

$29.00

Micron

Code

List Price

n n

Melt blown polypropylene Pre-filter or primary sediment filter

Dual Density DGD Cartridge Big 10” Part No.

Nominal Micron Pre Filter

Post Filter

715-BB10DG01

$36.00

715-BB10DG05

$36.00

Dual gradient density layers for enhanced performance in pre-filter or sediment filter applications Large diameter prefilter reduces the particle load on the post filter.

Radial Flow Carbon Cartridge Big 10” Part No.

Micron

Chlorine taste & Odour reduction capacity @ flow

Code

List Price

715-BB10CB25

189000L @7.6lpm

$85.00

Effective Chlorine taste and odour reduction Unique design reduces carbon fines in filtered water Carbon Impregnated Pleated NCP Cartridge Big 10” Part No.

Micron

Media

Code

List Price

715-BB10CP10

Polyester

$103.00

Pentair® Pentek® NCP Series Cartridges are constructed from a carbon impregnated non cellulose media. They offer sediment filtration, as well as taste, odour and chlorine taste & odour reduction in one cartridge. Pleats provide additional surface area for high dirt loading capacity, while maintaining minimal pressure drop. This combination of a pleated polyester media and carbon filtration produces an outstanding filter cartridge with extended service life. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

357

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

WATER FILTRATION

BIG BLUE Housing 20”

Pentek BIG BLUE Housing 20” Part No.

Inlet/Outlet

Suits

Code

List Price

715-BB20HS50

1”

20” Big cartridge

$285.00

715-BB20HT50

1¼”

20” Big cartridge x2

$570.00

Housing – Polypropylene (opaque) Cap – Reinforced polypropylene O-Ring – Buna-N Temperature Rating– +4.0 to +52°C) Maximum Pressure: 8.6Bar (125PSI) Includes mounting bracket and spanner.

Pleated Cartridge Big 20” Part No.

Micron

Media

Code

List Price

715-BB20PL01

Polyester

$110.00

715-BB20PL05

Polyester

$85.00

715-BB20PL10

Polypropylene

$85.00

715-BB20PL20

Polypropylene

$85.00

715-BB20PL50

Polyester

$85.00

100% synthetic filter media Washable pre-filter or primary sediment filter n Cellulose fibres - mildew and rot resistant n

Polyspun Cartridge Big 20” Part No.

Micron

Media

Code

List Price

715-BB20PS01

Polypropylene

$51.00

715-BB20PS05

Polypropylene

$51.00

715-BB20PS20

Polypropylene

$51.00

715-BB20PS50

Polypropylene

$51.00

Micron

Code

List Price

$75.00

n Melt blown n Pre-filter or

polypropylene primary sediment filter

Dual Density DGD Cartridge Big 20” Part No.

715-BB20DG25

Nominal Micron

Pre Filter

Post Filter

Dual gradient density layers for enhanced performance in pre-filter or sediment filter applications Large diameter prefilter reduces the particle load on the post filter.

Radial Flow Carbon Cartridge Big 20” Part No.

Micron

Chlorine taste & Odour reduction capacity @ flow

Code

List Price

715-BB20CB25

378000L @15.2lpm

$150.00

Effective Chlorine taste and odour reduction Unique design reduces carbon fines in filtered water Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

358

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

WATER FILTRATION

Under Bench and UV filter systems

SLIMLINE UNDER BENCH DISPENSER Part No.

Description

Code

List Price

715-UBSL10H1

Slimline 10" Housing

$189.00

715-UBSL10H2

Slimline 10" Twin Kit

$270.00

Complete under bench drinking water filter set comes with housing, bracket, dispenser, installation fitting and a 0.5 micron carbon block cartridge to reduce sediment, chlorine, odours and protozoan cysts. Specifications: ■■ 10” SL Filter Housing and Carbon Block cartridge to reduce sediment, odour and chlorine taste. ■■ Benchtop dispenser tap. ■■ Tubing and connections (please specify when ordering) ■■ PRV recommended if water hammer is possible.

SLIMLINE DUAL UNDER BENCH WITH UV Part No.

Description

715-UV2SSL10H2 Slim Line 10" Twin Kit Specifications: ■■ Dual 10” Slimline housings with 20 and 1-micron polyspun cartridges ■■ 2S UV Chamber and ballast with count down timer ■■ Mounting bracket/Spanner. ■■ 20-30 lpm recommended flow rate ■■ 1/2” Ports

Code

List Price

$620.00

Code

List Price

$1600.00

$2050.00

BIG BLUE 10” KIT WITH UV Part No.

715-UV10SBB10H2

Description

Big Blue 10" Twin Kit

715-UV10SBB10H3 Big Blue 10" Triple Kit Specifications: ■■ Dual includes 10” Big Blue housings with 20 and 1-micron polyspun cartridges. ■■ Triple includes 10” Big Blue Housing with 20 and 1-micron polyspun and carbon cartridges. ■■ 10S UV Chamber and ballast with count down timer ■■ Mounting bracket/Spanner. ■■ 58-110 lpm recommended flow rate. ■■ 1” Ports

BIG BLUE 20” KIT WITH UV Part No.

715-UV10SBB20H2

Description

Big Blue 20" Twin Kit

715-UV15SBB20H2 Big Blue 20" Twin Kit Specifications: ■■ Dual includes 10” Big Blue housings with 20 and 1-micron polyspun cartridges. ■■ 10S or 15S UV Chamber and ballast with count down timer ■■ Mounting bracket/Spanner. ■■ 58-110 lpm recommended flow rate 10S. ■■ 90-170 lpm recommended flow rate 15S. ■■ 1” Ports

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

359

Code

List Price

$2050.00

$2500.00

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

WATER FILTRATION

Inline Filters

INLINE FILTER SCREEN Part No.

715‑FST120‑034

Inlet/Outlet

¾"

Filter

Screen

Micron

130

Max Pressure

6 Bar

Max flow (m3/h)

Filter area

90cm2

Code

List Price

$25.00

715‑FST120‑100

Screen

130

6 Bar

90cm2

$35.00

715‑FST120‑112

1½"

Screen

130

6 Bar

246cm2

$45.00

715‑FST120‑200

Screen

130

6 Bar

246cm2

$70.00

715‑FSYB120‑200

Screen

130

6 Bar

763cm2

$120.00

In-line filters of mesh screen strainer to reduce containments in water. Housings are made from robust plastic with heavy duty lock ring for simple cartridge release and servicing without requiring tools. The 1 1/2” and 2” housings have two 1/4” male ports and all models have 3/4” male bottom port. The stainless mesh screen has plastic frame for strength and is simple to clean.

INLINE FILTER DISC Part No.

715‑FDT120‑034

Inlet/Outlet

¾"

Filter

Disc

Micron

130

Max Pressure

6 Bar

Max flow (m3/h)

Filter area

90cm2

Code

List Price

$25.00

715‑FDT120‑100

Disc

130

6 Bar

90cm2

$35.00

715‑FDT120‑112

1 ½"

Disc

130

6 Bar

254cm2

$45.00

715‑FDT120‑200

Disc

130

6 Bar

254cm2

$70.00

715‑FDYB120‑200

Disc

130

6 Bar

879cm2

$120.00

In-line filters with disc strainer to reduce containments in water. Housings are made from robust plastic with heavy duty lock ring for simple cartridge release and servicing without requiring tools. The 1 1/2” and 2” housings have two 1/4” male ports and all models have 3/4” male bottom port. The Disc filter uses plastic discs with fine groves, when the cartridge is removed, the discs come apart to dislodge sediment and be cleaned.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

360

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

VALVES & FITTINGS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

VALVE & FITTINGS

Index

364

365

VALVES & FITTINGS Butterfly Handle Ball Valves -Brass

366

PVC Ball Valves

367

Long Handle Ball Valve - Stainless Steel

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

367

Gate Valves

362

Long Handle Ball Valves -Brass

Butterfly Valves

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

VALVE & FITTINGS

368

Index

370

Spring Check Valves

372

371

Ball Check Valves

Swing Check Valves

373

Inline Strainers

376

374

Foot Valve Strainers

376

Pressure Reducer Valves

391

Stainless Fittings

Flexible Hoses

Extendable Flexible Hoses

Cam Lock Adapters

Layflat Blue Std Duty Hose Kit

394

Pump Stands 363

Coelbo Tees

391

393

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Union Couplers

386

390

392

PVC Suction Hose

Flow Meters

Plastic Connectors

Manifolds & Flanges

Flexible Couplers

377

382

389

387

Alderdice Bronze Valves

Pressure Relief Valves

Brass Fittings

Foot Valves

375

376

381

378

372

Thread Seal Compound Pump Covers

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Mini/Butterfly Handle Ball Valves - Brass

VALVE & FITTINGS

MINI BALL VALVE - BRASS Part No.

Inch

Thread

Type

Dimensions DN

Code

List Price

229-4109-014

BSP

Female/Female

$10.00

229-4109-012

BSP

Female/Female

$11.00

229-4110-014

BSP

Male/Female

$10.00

229-4110-012

BSP

Male/Female

$11.00

Technical details: Materials ■■ Locking Nut: Brass. 20ºC Max Pressure: 15Bar. ■■ Seat: PTFE. ■■ 80ºC Max Pressure: 8Bar. ■■ Ball: Brass. ■■ Min Temp: -20ºC. ■■ Threads according to ISO 228/1 ■■ Body: Brass. ■■ O Ring: NBR. ■■ Stem: Brass. ■■ Handle: Aluminium. ■■ Screw: Steel.

■■

7 8

BUTTERFLY HANDLE BALL VALVE - BRASS Part No.

Inch

Thread

Type

Dimensions

Code

List Price

$9.50

229-4093-012

BSP

Female/Female

229-4093-034

BSP

Female/Female

$13.50

229-4093-100

BSP

Female/Female

$21.00

Code

List Price

$11.00

Materials Technical details: ■■ Stem: Brass. 80ºC Max Pressure: 25Bar. ■■ Hex nut: Steel. ■■ 150ºC Max Pressure: 10Bar. ■■ Butterfly Handle: Aluminium. ■■ Min Temp: -20ºC. ■■ Threads according to ISO 228/1 ■■ Packing nut: Brass. ■■ Packing: PTFE. ■■ O Ring: NBR. ■■ Body: Brass. ■■ Ball: Brass. ■■ Seat: PTFE. ■■

BUTTERFLY HANDLE BALL VALVE - BRASS Part No.

229-4094-012

Inch

Thread

BSP

Type

Male/Female

Dimensions DN

229-4094-034

BSP

Male/Female

$15.00

229-4094-100

BSP

Male/Female

$24.00

Technical details: Materials ■■ 80ºC Max Pressure: 25Bar. ■■ Stem: Brass. ■■ 150ºC Max Pressure: 10Bar. ■■ Hex nut: Steel. ■■ Min Temp: -20ºC. ■■ Butterfly Handle: Aluminium. ■■ Threads according to ISO 228/1 ■■ Packing nut: Brass. ■■ Packing: PTFE. ■■ O Ring: NBR. ■■ Body: Brass. ■■ Ball: Brass. ■■ Seat: PTFE.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

364

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Long Handle Ball Valves - Brass

VALVE & FITTINGS

LONG HANDLE BALL VALVE - BRASS Part No.

229-4095-014

229-4095-038

229-4095-012

229-4095-034 229-4095-100 229-4095-114

Inch

Thread

Type

Dimensions

Code

List Price

BSP

Female/Female

$9.00

BSP

Female/Female

$10.00

BSP

Female/Female

$11.00

BSP

Female/Female

$17.00

BSP

Female/Female

104

$28.00

1¼

BSP

Female/Female

132

$45.00

229-4095-112

1½

BSP

Female/Female

140

$55.00

229-4095-200

BSP

Female/Female

101

149

$80.00

229-4095-212

2½

BSP

Female/Female

134

205

$165.00

229-4095-300

BSP

Female/Female

153

123

205

$255.00

229-4095-400

100

BSP

Female/Female

178

135

280

$365.00

Code

List Price

$12.00

Technical details: 80ºC Max Pressure: 30Bar. 150ºC Max Pressure: 15Bar. Min Temp: -20ºC. Incorporated no-frost feature. Threads according to ISO 228/1

■■ ■■ ■■ ■■ ■■

Materials ■■ Handle: Zinc plated steel. ■■ Locknut: Stainless steel. ■■ Stem: Brass. ■■ Packing nut: Brass. ■■ Packing: PTFE. ■■ O Ring: NBR. ■■ Body: Brass. ■■ Ball: ¼ - 1” Brass. 1 ¼” -4” Stainless steel. ■■ Seat: PTFE.

LONG HANDLE BALL VALVE - BRASS Part No.

Inch

Thread

Type

Dimensions DN

229-4097-012

BSP

Male/Female

229-4097-034

BSP

Male/Female

$18.00

229-4097-100

BSP

Male/Female

104

$30.00

229-4097-114

1¼

BSP

Male/Female

132

$47.00

229-4097-112

1½

BSP

Male/Female

140

$57.00

229-4097-200

BSP

Male/Female

111

149

$84.00

Technical details: 80ºC Max Pressure: 30Bar. 150ºC Max Pressure: 15Bar. Min Temp: -20ºC. Incorporated no-frost feature. Threads according to ISO 228/1

■■ ■■ ■■ ■■ ■■

Materials ■■ Stem: Brass. ■■ Locknut: Stainless steel. ■■ Handle: Zinc plated Steel. ■■ Clamp: Brass. ■■ Packing: PTFE. ■■ O Ring: NBR. ■■ Body: Brass CW617N. ■■ Ball: ½ - 1” Brass. 1 ¼-2” –Stainless steel.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

365

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PVC Ball valves Long Handle Ball Valves - Stainless Steel

VALVE & FITTINGS

BUTTERFLY HANDLE BALL VALVES - PVC Part No.

Inch

Thread

Type

Dimensions A

Code

List Price

229-10100

BSP

Female/Female

111

$30.00

229-10114

1¼

BSP

Female/Female

131

148

$35.00

229-10112

1½

BSP

Female/Female

131

148

$45.00

229-10200

BSP

Female/Female

111

155

168

$55.00

229-10212

2½

BSP

Female/Female

168

184

221

238

$215.00

229-10300

BSP

Female/Female

168

184

221

242

$300.00

Pag.2/2

Technical details: ■■ Temperature range: -10ºC to 60ºC. ■■ Max Working pressure: 10Bar. ■■ EPDM Seals. ■■ PVC construction.

LONG HANDLE BALL VALVES - STAINLESS STEEL

Art. Nº: 1010 MM Inch Thread

Art. Nº: 101010 Code

Part No.

Type

229-SBV44-012

229-SBV44-034

229-SBV44-100

¾ 101010 BSP 1010

229-SBV44-114 Código 25

BSP

Female/Female

$18.00

BSP

Female/Female

$24.00

Female/Female

g BSP

BFemale/Female E F

229-SBV44-112 1010-25

32 1¼ 3/4 BSP 101010-25

1010-32 229-SBV44-200

101010-32 40 1½

1010-40

101010-40

1010-50 101010-50 Technical details: ■■ 304 Stainless Steel. 1010-63 101010-63 ■■ Max Working pressure: 10Bar.

List Price

1 BSP

$32.00

$51.00 Peso / Wheigt

Female/Female 65 92 54 111

L45

$69.00 280

65 92 54 111 Female/Female

L45

280 $88.00

1 1/4

131

148

644

1 1/2

131

148

635

111

155

168

1100

1010-75

101010-75

2 1/2

168

184

221

140

238

3130

1010-90

101010-90

168

184

221

140

242

3200

Dimensiones en milímetros / All dimensions in milímeters

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

366

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Gate Valves Butterfly valves

VALVE & FITTINGS

ONGA BRASS GATE VALVES Part No.

Inch

Code

List Price

229-700069

$22.00

229-700068

$108.00

229-700067

$262.00

STAINLESS GATE VALVES Part No.

Inch

Code

List Price

229-SGV44-034

$38.00

229-SGV44-100

$48.00

229-SGV44-114

1¼

$75.00

229-SGV44-112

1¾

$98.00

229-SGV44-200

$122.00

Technical details: ■■ 304 Stainless Steel. ■■ Die Cast Handle. ■■ Max working pressure 10 bar.

BUTTERFLY VALVES PN16 DIN 2502 Part No.

Inch

Dimensions A

Code

List Price

229-5115-200

140

125

170

$80.00

229-5115-212

2½

152

145

170

$115.00

229-5115-300

159

160

170

$145.00

229-5115-400

100

178

115

104

180

170

$190.00

Technical details: Max pressure: 150PSI / 10Bar. ■■ Operating temperature range: -20 to +120ºC. ■■ Flange according to: DIN2502 – PN16. ■■ Epoxy coated. ■■

Materials ■■ Valve body (1): Cast Iron. ■■ Disc (2): Chromed Ductile Iron. ■■ Seat (3): EPDM. ■■ Stem (4): 416 Stainless steel. ■■ Stem Seat (5): PTFE. ■■ O Ring (6). ■■ Indicator (7): Plastic. ■■ Lever (8) Aluminium .

Coeficiente Kv / Coefficient Kv Nº

PARTE / PART

1 Cuerpo / Body Prices shown are excluding GST and may change without notice. A freight charge may also apply. 2 Disco / Disc E&OE. For catalogue amendments and updates visit website. 3

Asiento / Seat

MATERIAL

STANDARD

Hierro Fundido / Cast Iron

GG25

GRADOS DE APERTURA / DEGREES OF OPENING

10º

20º

30º

40º

50º

60º

70º

0 0

7 10

17 19

32 33

55 63

84 99

123 157

FreeIron Phone 0508 634 341. Fax 09 634 367 DN 5074170 Email 4 sales@argondistributors.co.nz 10 21 36 55 77 Hierro Fundido / Ductile Acabado GGG40 Website www.argondistributors.co.nz Cromado / Cromed surface DN 65 EPDM EPDM DN 80

80º 107 175 236

90º 116 189 259

Spring Check Valves

VALVE & FITTINGS

SPRING CHECK VALVES 4114 - BRASS Part No.

Inch

Max pressure*

Dimensions D

Code

List Price

229-4114-012

25Bar

$14.00

229-4114-034

25Bar

$18.00

229-4114-100

25Bar

$32.00

229-4114-114

1¼

16Bar

$52.00

229-4114-112

1½

16Bar

$58.00

229-4114-200

16Bar

100

$99.00

229-4114-212

2½

10Bar

119

120

$187.00

229-4114-300

10Bar

140

$335.00

229-4114-400

100

10Bar

154

158

$410.00

100 Nº 4114 30

Pag.2/2

Technical details: ■■ *Max pressure up to 60ºC. Max pressure 10Bar for 60-100ºC. ■■ Threads according to ISO 228/1. Materials ■■ Valve body (1&2): Brass. ■■ Core/Stem (3-1B &3-2B) Brass. ■■ Disc(3-3): Stainless steel. ■■ Seal(4): NBR. ■■ Spring(5): Stainless steel.

Nº

Nombre Name /

Material

1 2 3-1B 3-2B 3-3 4 5

Cuerpo Body / Tapa /Bonnet Centro Core / Eje /Stem Disco Disc / Cierre Seal / Muelle Spring /

Latón Brass / Latón Brass / Latón Brass / Latón Brass / AceroInox. / StainlessSteel NBR AceroInox. / StainlessSteel

Dimensiones / Sizes Art. No.

SPRING CHECK VALVES EUROPA - BRASS Part No.

Inch

Max pressure A

229-IP100-038

25Bar

229-IP100-012

229-IP100-034

25Bar

58.5

25Bar

229-IP100-100

25Bar

229-IP100-114

1¼

229-IP100-112

1½

229-IP100-200

229-IP100-212 229-IP100-300 229-IP100-400

100

4114-015* 4114-020* Dimensions 4114-025* 4114-032** 4114-040** 4114-050** 4114-065*** 4114-080*** 4114-100***

G 1/2" 3/4" 1" 1 1/4" B1 1/2" 2" 2 1/2" 3" 4"

34.5

D 60 48 36 24 16 18 6 4 3

15 12 Code 9 6 4 3 1 1 1

Dimensiones en milímetros / All sizes in mm

34,5 42 List 47,5 60,5 71 87 119 140 154

57 64 Price 75 83 93 100 120 140 158

16 22 25 32 41 50 67 79 100

12 14,5 17,5 16,5 18,5 21 23 29 30

14 14,5 17,5 18,5 19 21 23 29 30

$11.00

$16.00

41.5

$3400

74.5

$37.00

18Bar

60.5

$60.00

18Bar

$78.00TEC

18Bar

101

2½

12Bar

122

120

$195.00

12Bar

141.5

140

$450.00

12Bar

158.5

172

$495.00

100

Technical details: ■■ Working temperature range: -20ºC to 100ºC. ■■ Threads according to ISO 228/1. Materials ■■ Valve body (1): Brass. ■■ Stem/Pin (2) Brass. ■■ Spring (3): Stainless steel 302. ■■ Plate (4): Stainless steel 304. ■■ Seal(5): NBR. ■■ Plug (6): Brass. ■■ End adapter (7):Brass.

25 31 40 50 55 67 88 100 126

Perfil

Grs

Hexa. Hexa. Hexa. Hexa. Hexa. Hexa. Octo. Octo. Octo.

25 25 25 16 16 16 10 10 10

185 265 420 650 875 1325 2635 4200 6265

$115.00

Business Key, S.L. se reserva el derecho de modificar en parte o en su totalidad las características de sus productos sin pre vio aviso. Business Key, S.L. keeps the right to modify in part or totally the characteristics of its products without previous notice. Para prevenir roturas, accidentes o daños severos, NO USAR este producto fuera de los límites técnicos y sus aplicaciones. Las normas locales pueden regular el uso de este producto.

To avoid abnormal operation, accidents or serious injury, DO NOT use this product outside of the specification range. Local regulations may regulate the use of this product.

2 3 4 5

6 7

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

368

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Spring Check Valves

VALVE & FITTINGS

SPRING CHECK VALVES AMITA - PLASTIC Part No.

Inch

Max pressure

Thread Type

Dimensions A

Code

List Price

229-AMITA-100

6Bar

Female

$21.00

229-AMITA-101

6Bar

Female/Male

$21.00

229-AMITA-114

1¼

6Bar

Female

$32.00

229-AMITA-112

1½

6Bar

Female

104

$48.00

Code

List Price

Technical details: Nominal working pressure: 6Bar. ■■ Threads according to ISO 228/1. ■■ Working temperature: -20ºC to +70ºC. ■■

Materials ■■ Valve body Stabilized nylon and 30% fiber glass. ■■ Valve Disc and spring: 316 stainless steel. ■■ Seal ring: NBR.

SPRING CHECK VALVES IDRJA – STAINLESS STEEL Part No.

Inch

Max pressure

Dimensions A

229-IDRJA-100

16Bar

$80.00

229-IDRJA-114

1¼

16Bar

$105.00

229-IDRJA-112

1½

16Bar

115

$135.00

Technical details: Working temperature range: -20ºC to 150ºC. ■■ Threads according to ISO 228/1. ■■ Pressed & Tig welded construction. ■■

Materials ■■ Valve body and all metal parts (1,2,4,5,6,7,8,10,11,12): AISI 304 Stainless steel. ■■ Seal ring (3 & 9): FPM.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

369

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Ball Check Valves

VALVE & FITTINGS

BALL CHECK VALVES – THREADED TYPE Part No.

Inch

Dimensions H

Code

List Price

229-BRV25

125

$170.00

229-BRV32

1¼

133

$175.00

229-BRV40

1½

150

$190.00

229-BRV50

175

$240.00

229-BRV65

2½

205

130

$380.00

229-BRV80

240

165

115

$480.00

Technical details: ■■ Max pressure: 10Bar. ■■ Operating temperature range: -10 to +80ºC. ■■ Vertical Mount.

Materials ■■ Valve body: Cast Iron. ■■ Ball: NBR. ■■ O Rings: NBR. ■■ Bolts: S/S 304. ■■ Coating: Epoxy 200µ.

Dimensioni di ingombro e pesi - Overall dimensions and weights

REPLACEMENT BALLDimensioni FOR BALL CHECKdi VALVES ingombro Part No.

Fits

N Codice - Code DN RS.26.051N 229-BRV25 PN R NRS.26.002R* (inch)RS.26.002N 229-BRV32 RS.26.051N RS.26.003R* 1" RS.26.003N RS.26.004R*1" ¼RS.26.004N RS.26.002R* RS.26.002N 229-BRV40 RS.26.003R* RS.26.003N 1" ½RS.26.055N 229-BRV50 10 2" RS.26.056N RS.26.004R* RS.26.004N

229-BRV25-RB 229-BRV32-RB 229-BRV40-RB 229-BRV50-RB 229-BRV65-RB

229-BRV65 2" ½ RS.26.055N 3" 229-BRV80 RS.26.056N

175 205 240

H L1 E KV Peso - Weight List Price PNCode (mm) (mm) (mm) (m³/h) (kg.) L1 E KV 43Peso 19,6 - Weight 1,5 70 L 125 $45.00 (mm) 133 (mm) 80(m³/h) 57 (kg.) 29,4 2,1 70 L 15043$50.00 1,5 82 19,6 63 57,8 2,3 10 90 29,4 74 78,3 3,1 80 L 17557$70.00 2,1 20563 13057,8 95 110,4 6,7 82 2,3 L 240 $90.00 179,5 10,6 90 74 16578,3 115 3,1

130L 165L

R= Ball on phenolic resin (*Standard) - N= Ball on NBR $220.00

95 110,4 $275.00 115 179,5

6,7 10,6

Esempio di installazione - Installation example R= Palla in resina fenolica (* standard) - N= Palla in NBR R= Ball on phenolic resin (*Standard) - N= Ball on NBR

Includes O Ring

Esempio BALL CHECK VALVE – FLANGED TYPE Part No.

DN (inch) H 1" (mm) 1" ¼ 125½ 1" 2" 133 2" 150½ 3"

R= Palla in resina fenolica (* standard) - N= Palla in NBR

229-BRV80-RB ■■

e pesi - Overall dimensions and weights

Codice - Code

Inch

di installazione - Installation example Valvola in posizione aperta. Aperta - Open Dimensions

C (PCD)

200

125

Aperta - Open ON

229-5125-200

106

229-5125-300

146

260

160

229-5125-400

100

194

300

180

229-5125-500

125

207

350

210

Max pressure: PN16.

■■

Operating temperature range: -10 to +80ºC.

■■

Valve design according to UNE EN-12334.

■■

Flange dimensions according to UNE EN 1092-2-PN16.

■■

Face to face according to DIN 3202 – UNE EN 558-1.

■■

Vertical Mount.

Materials ■■

Valve body: Cast Iron.

■■

Ball: NBR.

■■

O Rings: NBR.

■■

Bolts: S/S 304.

■■

Coating: Epoxy.

OFF Chiusa

can see,when thedella electric pump per in working di8XM16 ritegno a palla aperta. La palla valvola, effetto(ON), del li-the ball L Asèwe $415.00 is open. Because the pumped liquid, the ball is quido pompato,check vienevalve spinta in una sede of laterale di non intralcio. 8XM16 L pushed $525.00 to a notanche impediment Quindi il liquido contenente corpi lateral solidi housing. viene espulso Therefore the passage of liquids, containing suspended solid too, liberamente. 8XM16 L $725.00 is freely expelled.

As we can see,when the electric pump in working (ON), the ball check valve is open. Because of the pumped liquid, the ball is pushed to a not impediment lateral housing. Chiusa - Closed the passage Therefore containing Valvolaof inliquids, posizione chiusa. suspended solid too, is freely expelled. Quando l'elettropompa smette di funzionare (OFF), il liquido

Technical details: ■■

Quando l'elettropompa è in funzione (ON), notiamo che la valvola Code List Price di ritegno a palla è aperta. La palla della valvola, per effetto del liquido pompato, viene spinta in una sede laterale di non intralcio. Valvola in posizione aperta. Quindi il liquido contenente anche corpi solidi viene espulso liberamente. 4XM16 L $230.00 Quando l'elettropompa è in funzione (ON), notiamo che la valvola Holes

- Closed

pompato tende a ritornare nel pozzetto. Ma per effetto della gravità, la palla della valvola ritorna nella sua sede di riposo sigillando perfettamente la tubazione e bloccando il reﬂusso.

Valvola in posizione When the chiusa. electric pump stops (OFF), the pumped liquid tends to return in smette the well.di funzionare (OFF), il liquido Quando l'elettropompa Due to the gravity effect as well as to the liquid, the ball returns pompato tende a ritornare nel pozzetto. in its rest seat, perfectly sealing the pipe and locking the reﬂow. Ma per effetto della gravità, la palla della valvola ritorna nella sua sede di riposo sigillando perfettamente la tubazione e bloccando il reﬂusso.

OFF Il costruttore si riserva il diritto di modiﬁcare le caratteristiche tecniche senza preavviso.

The manufacturer reserves the right to modify the technical features without previous notice.

When the electric pump stops (OFF), the pumped liquid stamp tends to Timbro del rivenditore - Retailer’s AFPUMPS s.r.l. return in the well. Via dell’Artigianato n. 4 Prices shown are excluding GST and may change without notice. A freight charge may also apply. Phone 0508 634effect 341. Fax 634 7417 Email 370 DueFree to the gravity as09well as to thesales@argondistributors.co.nz liquid, the ball returns 35020 PERNUMIA (PD) ITALY Website www.argondistributors.co.nz E&OE. For catalogue amendments and updates visit website. its rest seat, perfectly sealing the pipe and locking the reﬂow. Tel. (+39) 0429 778295inr.a.

Swing Check Valves

VALVE & FITTINGS

SWING CHECK VALVES – RUBBER SEAT Part No.

Inch

Dimensions L

Code

List Price

229-IP130-012

$13.00

229-IP130-034

$19.00

229-IP130-100

$31.00

229-IP130-114

1¼

$48.00

229-IP130-112

1½

$54.00

229-IP130-200

$95.00

229-IP130-212

2½

120

$145.00

229-IP130-300

135

$205.00

229-IP130-400

100

160

103

$325.00

Nº 4119

Technical details: Max pressure: 12Bar. ■■ Operating temperature range: -0 to +70ºC. ■■ Threads according to ISO228/1. ■■

Materials ■■ Valve body, cap & Disc (1,2&3): Brass. ■■ Cap washer (4): Fiber. ■■ Seal (5): NBR. ■■ Washer (4): Stainless steel. ■■ Bolt (7): Brass.

Nº

Nombre Name /

1 2 3 4 5 6 7

Cuerpo Body / Tapa /Bonnet Clapeta/ Disco ArandelaWasher / Asiento Seal / Junta Gasket / Tornillo Bolt /

Material

Latón Brass / Latón Brass / Latón Brass / Fibra /Fiber NBR AceroInox/ Stainless Ste Latón Brass /

SWING CHECK VALVES – METAL SEAT

130M - 3/8”, 2” Part No.

229-IP130M-212

Inch

Dimensiones / Sizes

Max pressure

Dimensions

Art. No.

2½

Technical details: ■■ Operating temperature range: -0 to +90ºC

Code

TEC B

4119-015* 1/2'' 4119-020* 3/4'' 8Bar 119 4119-025* 1'' 127 4119-032** 1 1/4'' 4119-040** 1 1/2'' 4119 Threads according to-050** ISO228/1. 2'' 4119-065*** 2 1/2'' 4119-080*** 3'' 4119-100*** 4''

Materials ■■ Valve body, Plate etc (1,3,4,5,6,8,10): Brass CW614N. ■■ O Rings (2&8) : NBR. Overall

72 60 24 20 16 10 5 3 2

List Price DN

12 10 6 5 4 1 1 1 1

t1 & t2

13,5 20 $150.00 24 32 38 47 60 70 86

11,5 & 11,5 10 & 10 13 & 12 15 & 14 16 & 14 16 &16 22 & 21 22,5 & 22,5 27 & 26

33,5 40 44,5 52 64 67 80 92 103

48 52 63 74 86 98 120 135 160

22 26 27 34 40 49 63 77 95

180 240 350 530 680 120 178 290 470

Dimensiones en milímetros / All sizes in mm

DiMenSiOnS 130g

2 3

4 Business Key, S.L. se reserva el derecho de modificar en parte o en su totalidad las características de sus productos sin pre vio aviso. Business Key, S.L. keeps the right to modify in part or totally the characteristics of its products without previous notice. Para prevenir roturas, accidentes o daños severos, NO USAR este producto fuera de los límites técnicos y sus aplicaciones. Las normas locales pueden regular el uso de este producto.

To avoid abnormal operation, accidents or serious injury, DO NOT use this product outside of the specification range. Local regulations may regulate the use of this product.

Polígono Sector Campsd’enRicart, C/Comerç , 10 naves 4 a 9 · 08780 Pallejà· Barcelona · España Administración -Contabilidad: Tel. (+34) 93 680 49 80 · Fax. (+34) 93 680 -mail: 49 contabilidad@mtspain.net 82 · e Prices shown are excluding GST and may change without notice. A freight charge may also apply. Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz 371 Ventas: Tel. (+34) 93 680 49-mail: 81 eFree ventas@mtspain.net Website www.argondistributors.co.nz E&OE. For catalogue amendments and updates visit website. www.mtspain.net

Foot Valves Inline Strainers

VALVE & FITTINGS

FOOT VALVES - BRASS Part No.

Inch

Max Pressure

Dimensions H

Code

List Price

229-IP140-100

10Bar

$25.00

229-IP140-114

1¼

10Bar

$35.00

229-IP140-112

1½

10Bar

102

$50.00

229-IP140-200

10Bar

119

$70.00

Code

List Price

Technical details: Operating temperature: 90ºC, Max Pressure: 6Bar. 30ºC, Max Pressure: 10Bar. ■■ Minimum temperature: -20ºC. ■■ Threads according to ISO228/1. ■■

Materials ■■ Valve body, Plate & strainer (1,2 & 5): Brass. ■■ Seat/washer (3): NBR. ■■ Washer (4): Fibre.

INLINE Y STRAINERS - BRASS Part No.

Inch

Filtration (mm)

Dimensions D

229-IP192-012

0.5

$15.00

229-IP192-034

0.5

$21.00

229-IP192-100

0.5

$27.00

229-IP192-114

1¼

$40.00

229-IP192-112

1½

104

$55.00

229-IP192-200

125

$90.00

Technical details: Operating temperature range: -20 to +110ºC. ■■ Max pressure: 20Bar. ■■ Threads according to ISO228/1. ■■

Materials ■■ Body & Plug/cap(1&2):Brass. ■■ Washer (3): Fibre. ■■ Filter (4): 316 Stainless steel.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

372

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Foot Valve Strainers

VALVE & FITTINGS

FOOT VALVE STRAINER – POLYMER/STAINLESS STEEL Part No.

Inch

Filtration

Dimensions

Code

List Price

229-BG-038

0.8

$5.00

229-BG-012

0.8

$4.50

229-BG-034

0.8

$5.00

229-BG-100

0.8

$6.00

229-BG-114

1¼

0.8

$7.00

229-BG-112

1½

0.8

$8.00

229-BG-200

0.8

$10.00

229-BG-212

2½

1.2

$17.00

229-BG-300

1.2

111

$21.00

229-BG-400

100

1.2

130

120

$24.00

3 102 4

Technical details: Threads according to ISO228/1.

TEC

■■

Materials ■■ Strainer in Stainless steel 304. ■■ Thread adapter: Polymer.

FOOT VALVE STRAINER – STAINLESS STEEL Part No.

Inch

Filtration DØ

Dimensions H

229-FID-100

229-FID-114

B 1¼

25,5

229-FID-112

1½

$29.00

229-FID-200

101

$39.00

229-FID-212

2½

1.8

111

$75.00

229-FID-300

1.8

125

$90.00

229-FID-400

100

1.8

144

$115.00

1/2”

1 1

47 29,5

3/4”

List Price

229-FID-034

3/8”

Code

57,5 71 36

1”

1”1/4

15 75

43,5

50,5

56,5

1”1/2

L L L

2”

$18.00

3”

4”

$20.00 123

2/”1/2

138

152,5

86 $23.00

102

129

Technical details: Threads according to ISO228/1.

■■

Materials ■■ All Stainless steel 304.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

373

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Alderdice Bronze Valves

VALVE & FITTINGS

ALDERDICE BRONZE FOOTVALVES SIDE OUTLET (EXCL FLOATS) Part No.

Inch

Code

List Price

229-FFV114NF

1¼

$150.00

229-FFV112NF

1½

$175.00

229-FFV2NF

$225.00

229-FP7WS

Plastic Float + Stem

2 Required

$40.00

Alderdice Foot Valves are made of Gunmetal Bronze. They have a nitrile faced valve giving a positive non-return seal. The barrel shaped body allows an easy flow around the valve. Note: Foot valve is sold without floats. Two floats required for operation.

ALDERDICE BRONZE FOOTVALVES Part No.

229-000190-1

Inch

Code

List Price

$100.00

229-000195-1

1¼

$120.00

229-000200-1

1½

$160.00

229-000205-1

$250.00

229-000207-1

$650.00

Alderdice Foot Valves are made of Gunmetal Bronze. They have a nitrile faced valve giving a positive non-return seal. The barrel shaped body allows an easy flow around the valve.

ALDERDICE BRONZE VERTICAL CHECKVALVES Part No.

Inch

MM (nom)

Code

List Price

229-000215-1

$150.00

229-000222-1

1¼

$215.00

229-000230-1

$235.00

Alderdice Fullway Vertical Check Valves are also made of Gunmetal Bronze. They are identical in quality and operation to the Foot Valve.

ALDERDICE BRONZE HOIZONTAL CHECKVALVES Part No.

Inch

MM (nom)

Code

List Price

229-000223-1

$175.00

229-000222-1

1¼

$205.00

229-000224-1

1½

$265.00

229-000226-1

$330.00

Alderdice Horizontal Non- Return Check Valves are made of Gunmetal Bronze. They have a well guided nitrile faced valve, fitted with a “316” stainless steel spring to give a quick closing action.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

374

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Rev.0: 09/03/2012

VALVE & FITTINGS

Art. No. 5120 Descripcion: MANGUITO ELASTICO DE EXPANSIÓN DOBLE ONDA ROSCADO Description: DOUBLE SPHERE SCREWED RUBBER EXPANSION JOINT Flexible Couplers

Materiales: CUERPO EN EPDM CON REFUERZO INTERIOR MALLA DE NYLON EXTREMOS DE HIERRO FUNDIDO RUBBER EXPANSION JOINT - THREADED GALVANIZADO ROSCA H Part No.

MMLímites Técnicos: Inch

Length (L) mm

1 2 3

Thread

Code

PRESION NOMINAL DE TRABAJO: 1,0 Mpa (10 BAR)

Components: BODY IN POLARIZED RUBBER EPDM LINING IN NYLON UNION IN MALLEABLE IRON WITH FEMALE THREADS ListTechnical Price Limits:

WORKING PRESSURE: 1,0 MPa (10 BAR)

229-5120-100

3,0 Mpa200 (30 BAR) 25 PRESION DE ROTURA: 1

Female

BURSTING PRESSURE: 3,0MPa (30 BAR) $48.00

229-5120-114

1¼

200

Female

$65.00

229-5120-112

40 Características:1½

200

Female

Features: $75.00

229-5120-200

200

Female

TEMPERATURA DE TRABAJO: -10ºC - 80ºC ROSCAS BSPT BAJO NORMA ISO 228/1

WORKING TEMPERATURE: -10ºC - 80ºC BSPT THREADS UNDER ISO 228/1

$105.00

Technical details: ■■ Threads according to ISO228/1. ■■ Double sphere. ■■ Working pressure max: 10Bar. ■■ Bursting pressure: 30Bar. ■■ Working temperature: -10ºC to +80ºC. ■■ Max Axial compression: 22mm. ■■ Max Axial stretch: 6mm. ■■ Max lateral displacement: 22mm.

Rev.2: 27/07/2012

Materials Art. No. EPDM with 5121 ■■ Rubber body: Polarized nylon lining. Descripcion: MANGUITO ELÁSTICO SIMPLE ONDA ■■ Unions: Malleable Iron. Description: RUBBER EXPANSION JOINT, SINGLE SPHERE Materiales: CUERPO EN EPDM CON REFUERZO INTERIOR MALLA DE NYLON ESTRUCTURA EN HILO METALICO DE ACERO RUBBER EXPANSION JOINT - FLANGED BRIDAS EN ACERO FORJADO CROMADO Part No.

Inch

Dimensions

Límites Técnicos:

Code

L D1Ø PRESION NOMINAL DE TRABAJO: 1,6 MpaElongation

229-5121-112 (16 BAR) 40 1½ 95 110 PRESION DE ROTURA: /4,5 Mpa (45 BAR) Dimensiones Sizes: 229-5121-200 50 2 105 125 TEMPERATURA DE TRABAJO: -10ºC - 80ºC 229-5121-212 PRESION 65 AL VACIO: 2½ 115 (1 BAR) 145 100KPa 229-5121-300

Art. No.

1 1/4'' 1 1/2'' 2''

200 200 200

5120-032 2501 Technical details: 5120-040 ■■ Flanged according to DIN 2501. 5120-050 ■■ Single Sphere. ■■ Working pressure: 1.6MPa (16Bar). ■■ Bursting pressure: 4.8MPaUtilización: (48Bar). ■■ Working temperature: -10ºC to +80ºC. Use: ■■ Vacuum pressure: 100KPa.

List Price

Technical Limits: WORKING PRESSURE: 1,6 MPa (16 BAR)

Compression

$85.00

BURSTING PRESSURE: 4,8MPa (48 BAR) 10 L $110.00 Axial Displacement/ MovimientoWORKING Axial TEMPERATURE: -10ºC - +80ºC

80 3 130 160 8 Características:5120-020 3/4'' 200 229-5121-400 DIMENSIONES 100 4BRIDAS135 5120-025 1''180 DIN 20010 BAJO NORMA

Components: BODY IN POLARIZED RUBBER EPDM LINING IN NYLON FRAME IN HARD STEEL WIRE FLANGE IN CHROMED FORGED STEEL

1 2 3 4

L $120.00 Elongation13 Lateral Angle VACUUM PRESSURE: Kgs 100 KPa (1 BAR) Compression (mm) (mm) α1+α2 (mm) 15 L $130.00 5-6 22 22Features:45º 0,7 L $150.0022FLANGES 5 - 6 19 22 45º DRILLS1SIZE ACCORDING TO 5-6 22 22DIN 250145º 1,3 5-6 22 22 45º 1,9 5-6 22 22 45º 2,6

Garantizada para el uso en agua fría y caliente, agua de mar, aire comprimido y ácidos débiles. Guaranteed for the use of cold and hot water, sea water, air compressed and weak acids.

Materials ■■ Rubber body: Polarized EPDM Rubber. ■■ Lining: Nylon. ■■ Frame: Hard steel wire. ■■ Flange: Chromed forged steel. Business Key S.L. se reserva la facultad de cambiar en todo o en parte el diseño y materiales de cualquiera de sus productos. Business Key S.L. reserve the right to modify all or a part of the design materials of any of their products.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

375

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Pressure Reducer Valves, Pressure Relief Valves, Flow meters

VALVE & FITTINGS

PRESSURE REDUCING VALVES – WITH ¼” GAUGE PORT. Part No.

Connection

Inlet Pressure Max

Range

Max Temp.

Flow L/M

Code

List Price

228-MG106-012

½”

10Bar

1-4Bar

80o

10-20

$43.00

228-MG109-034

¾”

10Bar

1-4Bar

20-35

$55.00

228-MG143-100

1”

25Bar

1-6Bar

20-70

$130.00

Brass pressure reducing valve with brass seat. Female/Female threads and pressure gauge port.

PRESSSURE RELIEF/SAFETY VALVES Part No.

Size

Pressure range

Code

List Price

229-110475

½”

1 – 10Bar

$70.00

229-110476

¾”

1 – 10Bar

$82.00

229-110477

1”

1 – 10Bar

$110.00

229-110478

1¼”

1 – 10Bar

$180.00

229-110479

1½”

1 – 10Bar

$220.00

229-110480

2”

1 – 10Bar

$290.00

n n

Maximum working temperature:-25°C/+225°C. Brass body suitable for water, gas and steam.

FLOW METERS Part No.

Flow Range LPM

Connection

Max Pressure

Code

List Price

4-40

¾” BSP

6Bar

$110.00

228-Z5032

10-100

1” BSP

6Bar

$150.00

228-Z5050

25-250

2” BSP

6Bar

$230.00

228-Z5065

200-1000

2½” NPT

6Bar

$250.00

228-Z5615

1-10

½” BSP

10Bar

$125.00

228-Z5632

8-80

1” BSP

10Bar

$205.00

228-Z5650

25-250

2” NPT

10Bar

$450.00

228-Z5025

10Bar Rated

■■

■■ ■■

A simple alternative to expensive electronic flow meters these pipeline flow meters are great for pump test benches, water filtration systems and many other applications. Accuracy: +/- 5%. Maximum Temperature: 60°C for Z500 models, 100°C for Z560 models.

Materials: Z500 series. ■■ Taper tube body: Polycarbonate. ■■ Float: 304 stainless steel. ■■ Union connectors: PVC. Materials: Z560 series. ■■ Taper tube body: Polysulfone(PSU). ■■ Float: Polyvinylidene fluoride. ■■ Union connectors: PVC.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

376

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Union Couplers

VALVE & FITTINGS

UNION COUPLER FEMALE/FEMALE - BRASS Part No.

Inch

Sealing type

Code

List Price

229-87340-012

Conical seat

$12.00

229-87340-034

Conical seat

$16.00

229-87340-100

Conical seat

$22.00

229-87340-114

1¼

Conical seat

$34.00

229-87340-112

1½

Conical seat

$55.00

229-87340-200

Conical seat

$65.00

Sealing type

Code

List Price

UNION COUPLER FEMALE/MALE - BRASS Part No.

Inch

229-IP151-014

Conical seat

$11.00

229-IP151-012

Conical seat & O Ring

$12.00

229-IP151-034

Conical seat & O Ring

$15.00

229-IP151-100

Conical seat & O Ring

$26.00

229-IP151-114

1¼

Conical seat & O Ring

$36.00

229-87341-112

1½

Conical seat

$56.00

229-87341-200

Conical seat

$66.00

UNION COUPLER FEMALE/MALE – BRASS Part No.

Inch

Sealing Type

Code

List Price

229-IP152-012

Conical seat & O Ring

$17.00

229-IP152-034

Conical seat & O Ring

$18.00

229-IP152-100

Conical seat & O Ring

$35.00

229-IP152-114

1¼

Conical seat & O Ring

$45.00

SOCKET REDUCING MALE/FEMALE - BRASS Part No.

Reducing

Male

Female

Code

List Price

Inch

229-GC945-12-34

$5.00

229-GC945-12-1

$7.00

229-GC945-34-1

$8.00

229-GC945-1-114

1¼

$13.00

229-GC945-1-112

1½

$20.00

229-GC945-1-2

$24.00

229-GC945-114-112

1¼

1½

$22.00

229-GC945-114-2

1¼

$23.00

229-GC945-112-2

1½

$24.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

377

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Brass Fittings

VALVE & FITTINGS

PLUG MALE - BRASS Part No.

Inch

Code

Lst Price

229-GC290-014

$2.00

229-GC290-012

$3.00

229-GC290-034

$4.00

229-GC290-100

$5.00

229-GC290-114

1¼

$8.00

229-GC290-112

1½

$12.00

229-GC290-200

$15.00

Inch

Code

List Price

229-GC730-012

$6.00

229-GC730-034

$9.00

229-GC730-100

$15.00

229-GC730-114

1¼

$25.00

229-GC730-112

1½

$30.00

229-GC730-200

$50.00

Code

List Price

TEE FEMALE - BRASS Part No.

TEE FEMALE REDUCING - BRASS Part No.

Inch

229-GC735-112-100

1½

reducing to 25mm/1”

$29.00

229-GC735-200-100

reducing to 25mm/1”

$39.00

TEE FEMALE/MALE - BRASS Part No.

229-R3VIE-71

Inch

Code

List Price

$15.00

Inch

Code

List Price

$20.00

TEE 5 WAY - BRASS Part No.

229-R5VIE91

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

378

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Brass Fittings

VALVE & FITTINGS

ELBOW FEMALE/FEMALE - BRASS Part No.

Inch

Code

ListPrice

229-GC740-012

$5.00

229-GC740-034

$8.00

229-GC740-100

$13.00

229-GC740-114

1¼

$19.00

229-GC740-112

1½

$23.00

Code

List Price

reducing to 25mm/1”

$25.00

Inch

Code

List Price

229-GC750-012

$6.00

229-GC750-034

$9.00

229-GC750-100

$14.00

229-GC750-114

1¼

$21.00

229-GC750-112

1½

$25.00

Inch

Code

List Price

$21.00

229-87001-114

1¼

$37.00

229-87001-112

1½

$42.00

229-87001-200

$85.00

Code

List Price

$3.00

ELBOW FEMALE/FEMALE REDUCING - BRASS Part No.

Inch

229-GC755-114-100

1¼

ELBOW FEMALE/MALE - BRASS Part No.

BEND SWEEP MALE/FEMALE - BRASS Part No.

229-87001-100

BUSH REDUCER - BRASS Part No.

Reducing

From

Inch

229-GC780-12-14

229-GC780-38-12

$4.00

229-GC780-34-12

$5.00

229-GC780-1-12

$6.00

229-GC780-1-34

$6.00

229-GC780-114-34

1¼

$10.00

229-GC780-114-1

1¼

$10.00

229-GC780-112-1

1½

$14.00

229-GC780-112-114

1½

1¼

$14.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

379

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Brass Fittings

VALVE & FITTINGS

NIPPLE HEX - BRASS Part No.

Inch

229-GC900-014

229-GC900-038

229-GC900-012

229-GC900-034 229-GC900-100 229-GC900-114

Code

List Price

$3.00

$4.00

$6.00

$7.00

1¼

$12.00

229-GC900-112

1½

$14.00

229-GC900-200

$32.00 $52.00

229-GC900-212

2½

229-GC900-300

$76.00

229-GC900-400

100

$138.00

Code

List Price

NIPPLE HEX REDUCING - BRASS Part No.

Reducing

From

Inch

$3.00

229-GC790-34-12

$4.00

229-GC790-1-12

$5.00

229-GC790-1-34

$6.00

229-GC790-114-34

1¼

$8.00

229-GC790-114-1

1¼

$9.00

229-GC790-12-14

229-GC790-112-1

1½

$11.00

229-GC790-112-114

1½

1¼

$13.00

229-GC790-2-1

$16.00

229-GC790-2-114

1¼

$18.00

229-GC790-2-112

1½

$21.00

229-GC790-212-2

2½

$45.00

SOCKET - BRASS Part No.

Inch

Code

List Price

229-GC940-012

$5.00

229-GC940-034

$6.00

229-GC940-100

$9.00

229-GC940-114

1¼

$13.00

229-GC940-112

1½

$18.00

229-GC940-200

$29.00

Inch

Code

List Price

SOCKET EQUAL MALE/FEMALE - BRASS Part No.

229-GC935-014

$2.50

229-GC935-012

$3.00

229-GC935-020

$4.00

229-GC935-100

$8.00

229-GC935-114

1¼

$10.00

229-GC935-112

1½

$14.00

229-GC935-200

$21.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

380

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Plastic Connectors

VALVE & FITTINGS

ONGA MOULDED HOSE END CONNECTORS Part No.

Poly Pipe

Threaded End

Type

Code

List Price

345-602010

¾”

Male

$6.00

345-605350

¾”

1”

Male

$7.00

345-602820

1”

¾”

Male

$6.00

345-601668

1”

Male

$8.00

345-601667

1”

1¼”

Male

$9.00

345-601666

1¼”

1”

Male

$7.00

345-601664

1¼”

Male

$9.00

345-504230

1¼”

1 ½”

Male

$10.00

345-601662

1½”

1¼”

Male

$11.00

345-601669

1½”

Male

$10.00

345-601660

2”

1½”

Male

$12.00

345-601661

2”

Male

$14.00

345-604806

1”

¾”

Female

$12.00

345-603870

1”

Female

$12.00

345-605370

1¼”

1”

Female

$13.00

345-601665

1¼”

Female

$14.00

345-601663

1½”

1¼”

Female

$15.00

345-502210

2”

1¼”

Female

$17.00

Code

List Price

$10.00

POLYAMIDE ADAPTER UNION Part No.

228-RECR154

Description

Adapter Union Polyamide 1” Male/Female B

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

381

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

VALVE & FITTINGS

Contents Fittings Stainless

STAINLESS HEX PLUG MM

Inch

Code

List Price

229-SS296-014

Part No.

316

$3.00

229-SS296-038

3/8

316

$3.00

229-SS296-012

316

$3.00

229-SS296-034

316

$6.00

229-SS296-100

316

$8.00

229-SS296-114

1¼

316

$12.00

229-SS296-112

1½

316

$15.00

229-SS296-200

316

$23.00

229-SS296-212

2½

316

$40.00

229-SS296-300

316

$57.00

Inch

Code

List Price

STAINLESS HEX CAP Part No.

229-SS306-014

316

$4.00

229-SS306-038

3/8

316

$4.00

229-SS306-012

316

$5.00

229-SS306-034

316

$8.00

229-SS306-100

316

$11.00

229-SS306-114

1¼

316

$17.00

229-SS306-112

1½

316

$20.00

229-SS306-200

316

$31.00

229-SS306-212

2½

316

$61.00

229-SS306-306

316

$85.00

STAINLESS HEX EQUAL TEE MM

Inch

Code

List Price

229-SS736-014

Part No.

316

$6.00

229-SS736-038

3/8

316

$7.00

229-SS736-012

316

$8.00

229-SS736-034

316

$12.00

229-SS736-100

316

$19.00

229-SS736-114

1¼

316

$27.00

229-SS736-112

1½

316

$36.00

229-SS736-200

316

$54.00

229-SS736-212

2½

316

$114.00

229-SS736-300

316

$161.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

382

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

VALVE & FITTINGS

Contents Fittings Stainless

STAINLESS ELBOW FF MM

Inch

Code

List Price

229-SS746-014

Part No.

316

$4.00

229-SS746-038

3/8

316

$5.00

229-SS746-012

316

$6.00

229-SS746-034

316

$8.00

229-SS746-100

316

$13.00

229-SS746-114

1¼

316

$21.00

229-SS746-112

1½

316

$27.00

229-SS746-200

316

$40.00

229-SS746-212

2½

316

$84.00

229-SS746-300

316

$119.00

Inch

Code

List Price

STAINLESS ELBOW MF Part No.

229-SS756-014

316

$5.00

229-SS756-038

3/8

316

$6.00

229-SS756-012

316

$7.00

229-SS756-034

316

$10.00

229-SS756-100

316

$16.00

229-SS756-114

1¼

316

$24.00

229-SS756-112

1½

316

$30.00

229-SS756-200

316

$45.00

Inch

Code

List Price

STAINLESS HEX CROSS Part No.

229-SS766-014

316

$9.00

229-SS766-038

3/8

316

$10.00

229-SS766-012

316

$12.00

229-SS766-034

316

$18.00

229-SS766-100

316

$27.00

229-SS766-114

1¼

316

$41.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

383

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Contents Fittings Stainless

VALVE & FITTINGS

STAINLESS REDUCING BUSH Part No.

Inch

Reduce mm

Reduce inch

Code

List Price

229-SS786-038-014

3/8

316

$4.00

229-SS786-012-038

3/8

316

$5.00

229-SS786-034-012

316

$6.00

229-SS786-100-034

316

$9.00

229-SS786-114-100

1¼

316

$13.00

229-SS786-112-114

1½

1¼

316

$16.00

229-SS786-200-112

1½

316

$25.00

229-SS786-212-200

2½

316

$46.00

229-SS786-300-212

2½

316

$69.00

STAINLESS REDUCING NIPPLE Part No.

Inch

229-SS796-038-014

3/8

229-SS796-012-038

229-SS796-034-012

Reduce mm

Reduce inch

Code

List Price

316

$5.00

3/8

316

$6.00

316

$7.00

229-SS796-100-034

316

$10.00

229-SS796-114-100

1¼

316

$15.00

229-SS796-112-114

1½

1¼

316

$19.00

229-SS796-200-112

1½

316

$26.00

229-SS796-212-200

2½

316

$50.00

229-SS796-300-212

2½

316

$69.00

STAINLESS HEX NIPPLE Part No.

Inch

Code

List Price

229-SS906-014

316

$4.00

229-SS906-038

3/8

316

$5.00

229-SS906-012

316

$6.00

229-SS906-034

316

$7.00

229-SS906-100

316

$11.00

229-SS906-114

1¼

316

$15.00

229-SS906-112

1½

316

$19.00

229-SS906-200

316

$28.00

229-SS906-212

2½

316

$50.00

229-SS906-300

316

$69.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

384

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Contents Fittings Stainless

VALVE & FITTINGS

STAINLESS REDUCING NIPPLE SOCKET Part No.

Inch

Reduce mm

Reduce inch

Code

List Price

229-SS946-034-100

229-SS946-100-114

316

$15.00

1¼

316

$22.00

229-SS946-114-112

229-SS946-200-112

1¼

1½

316

$27.00

1½

316

$40.00

STAINLESS UNION FF FLAT FACE WITH PTFE SEAL MM

Inch

Code

List Price

229-SS156-014

Part No.

316

$11.00

229-SS156-012

316

$15.00

229-SS156-034

316

$19.00

229-SS156-100

316

$22.00

229-SS156-114

1¼

316

$44.00

229-SS156-112

1½

316

$54.00

229-SS156-200

316

$78.00

Inch

Code

List Price

229-SS164-014

304

$9.00

229-SS164-100

304

$22.00

229-SS164-114

1¼

304

$32.00

Inch

Code

List Price

229-SS166-014

316

$13.00

229-SS166-012

316

$18.00

229-SS166-034

316

$23.00

229-SS166-100

316

$33.00

229-SS166-114

1¼

316

$48.00

229-SS166-112

1½

316

$59.00

229-SS166-200

316

$85.00

STAINLESS UNION MF FLAT FACE WITH PTFE SEAL Part No.

■■

Union M/F with PTFE seall.

STAINLESS UNION FF FLAT FACE WITH PTFE SEAL Part No.

■■

Union M/F with PTFE seall.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

385

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

VALVE & FITTINGS

ContentsTees Coelbo

PLASTIC 4 WAY TEE WITH GAUGE Part No.

Inch

Code

List Price

$45.00

227‑MAN001

The Plastic 4 Way Tee with check valve is ideal for simple set up of a pump pressure system with a 1″ male inlet port and two 1″ female outlet ports plus a 1/4″ female port for control such as pressure switch or transducer and an inbuilt 10bar pressure gauge.

PLASTIC 4 WAY TEE WITH GAUGE Part No.

227‑MAN002

Inch

Code

List Price

$50.00

The Stainless 5 Way Tee with check valve is ideal for simple set up of a pump pressure system with a 1″ male inlet port and two 1″ female outlet ports plus two 1/4″ female ports for gauges or control such as pressure switch or transducers.

BRASS ADAPTER UNION Part No.

228-UNIONHG

Description

Brass 2 Piece Union 1.25”-1” for Hydrogenie Controllers

Code

List Price

$22.00

Two unions required for top and bottom ports on Hydrogenie controllers for simple installation.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

386

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Contents Manifolds

VALVE & FITTINGS

SINGLE MANIFOLDS Part No.

Size

DMPM

Dimension in mm A

Code

List Price

$85.00

228-MAND3215

32mm

15mm

190

120

228-MAND4015

40mm

15mm

190

120

$95.00

228-MAND5015

50mm

15mm

190

120

$105.00

TECHNICAL FEATURES: n n n n n

Material: stainless steel Aisi 304 Welded joints: TIG welded Surface treatment: degreasing, pickling and electropolishing. Threaded models: UNI ISO 228/1 gas threads Nominal working pressure: 16 bar

DOUBLE SWITCH MANIFOLDS Part No.

227‑MAN010

Size

Inch

Code

List Price

$110.00

The Stainless double switch manifold has two 1/4″ female and two 1/4″ male ports to set up a pressure system with dual pressure switches and separate gauge. Comes with a mini ball valve.

FLANGES Part No.

Size

DMP

Dimension in mm A

Holes

Dia

Code

List Price

228-FLANM32

32mm

140

100

41.5

14.5

$75.00

228-FLANM40

40mm

150

110

46.5

$85.00

228-FLANM50

50mm

165

125

52.5

$95.00

228-FLANF32

32mm

140

100

$75.00

228-FLANF40

40mm

150

110

$85.00

228-FLANF50

50mm

165

125

25.5

$95.00

MALE

FEMALE

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

387

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Contents and Flanges Manifolds

VALVE & FITTINGS

TRIPLE MANIFOLDS Part No.

DNM

DMP

Dimension in mm

228-MANT5032

50mm

32mm

900

300

150

370

$415.00

228-MANT6540

65mm

40mm

900

300

150

370

$435.00

228-MANT7550

75mm

50mm

1060

360

170

370

160

$470.00

Code

List Price

228-MANTS5032

50mm

32mm

900

300

150

$270.00

228-MANTS6540

65mm

40mm

900

300

150

$300.00

228-MANTS7550

75mm

50mm

600

360

170

$370.00

TECHNICAL FEATURES: n n n n n n

Manufacturing process: pipes cold formed Material: stainless steel Aisi 304 Welded joints: TIG welded Surface treatment: degreasing, pickling and electropolishing. Threaded ends: UNI ISO 228/1 gas cylindric Nominal working pressure: 16 bar

DELIVERY

G 1" f.

SUCTION

G 1" f. D

G 1/4" f.

DMP

G 1/4" m.

DMP

G 1/2" f.

DNM

G 1/4" m.

DMP

B/2 C

DMP

DMP B

DUAL MANIFOLDS Part No.

DNM

DMP

Dimension in mm A

Code

List Price

228-MAND5025

50mm

25mm

600

300

150

370

115

$260.00

228-MAND5032

50mm

32mm

600

300

150

370

115

$270.00

228-MAND6540

65mm

40mm

600

300

150

370

115

$280.00

228-MAND7550

75mm

50mm

700

360

170

370

165

$360.00

228-MANS5032

50mm

32mm

600

300

150

$200.00

228-MANS6532

65mm

32mm

600

300

150

$220.00

228-MANS6540

65mm

40mm

600

300

150

$230.00

228-MANS7550

75mm

50mm

700

360

170

$290.00

TECHNICAL FEATURES: n n n n n n

DELIVERY E

G 1" f.

SUCTION

G 1/4" f.

DMP F

G 1/4" m.

DMP

DMP B/2

G 1/2" f.

DNM

G 1/4" m.

F B

DMP B

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

388

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

VALVE & FITTINGS

Flexible Hoses

FLEXIBLE HOSE STRAIGHT Part No.

Diameter

Length MM

Type

Braiding type

Code

List Price

228-FLMF30

25mm/1”

300

M/F Straight

Galv Steel

$22.00

228-FLMF40

25mm/1”

400

M/F Straight

Galv Steel

$24.00

228-FLMF50

25mm/1”

500

M/F Straight

Galv Steel

$30.00

228-FLMF60

25mm/1”

600

M/F Straight

Galv Steel

$37.00

228-FLMF70

25mm/1”

700

M/F Straight

Galv Steel

$39.00

228-FLMF100

25mm/1”

1000

M/F Straight

Galv Steel

$49.00

228-FLMF6014

32mm/1 ¼”

600

M/F Straight

Galv Steel

$58.00

228-FLMF10014

32mm/1 ¼”

1000

M/F Straight

Galv Steel

$81.00

FLEXIBLE HOSE STRAIGHT – STAINLESS STEEL BRAID Part No.

Diameter

Length MM

Type

Braiding type

Code

List Price

228-FLXMF40

25mm/1”

400

M/F Straight

Stainless

$39.00

228-FLXMF50

25mm/1”

500

M/F Straight

Stainless

$42.00

228-FLXMF60

25mm/1”

600

M/F Straight

Stainless

$44.00

228-FLXMF70

25mm/1”

700

M/F Straight

Stainless

$48.00

228-FLXMF80

25mm/1”

800

M/F Straight

Stainless

$50.00

25mm/1”

1000

M/F Straight

Stainless

$61.00

228-FLXMF6014

228-FLXMF100

32mm/1 ¼”

600

M/F Straight

Stainless

$75.00

228-FLXMF8014

32mm/1 ¼”

800

M/F Straight

Stainless

$95.00

228-FLXMF1014

32mm/1 ¼”

1000

M/F Straight

Stainless

$99.00

228-FLXMF6012

40mm/1 ½”

600

M/F Straight

Stainless

$125.00

228-FLXMF1012

40mm/1 ½”

1000

M/F Straight

Stainless

$140.00

Diameter

Length MM

Type

Braiding type

Code

List Price

228-FLCMF50

25mm/1”

500

M/F Elbow

Galv Steel

$48.00

228-FLCMF60

25mm/1”

600

M/F Elbow

Galv Steel

$50.00

228-FLCMF80

25mm/1”

800

M/F Elbow

Galv Steel

$55.00

228-FLCMF100

25mm/1”

1000

M/F Elbow

Galv Steel

$70.00

FLEXIBLE HOSE ELBOW Part No.

FLEXIBLE HOSE ELBOW – STAINLESS STEEL BRAID Part No.

Diameter

Length MM

Type

Braiding type

Code

List Price

228-FLXCMF60

25mm/1”

600

M/F/Elbow

Stainless

$62.00

228-FLXCMF80

25mm/1”

800

M/F/Elbow

Stainless

$75.00

Technical Details: ■■ Maximum working pressure: 25mm/1”: 15Bar. ■■ 32mm/1 ¼”: 10Bar. ■■ Working Temperature: -5o to +100ºC. Materials Inner hose: EPDM. ■■ Fittings: Brass CW614n. ■■ Sleeves: Aluminium. ■■ Braiding: Galvanized steel or Stainless steel. ■■

*Note: Replacement Gasket Available. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

389

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Extendable Flexible Hoses

VALVE & FITTINGS

EXTENDABLE FLEXIBLE HOSES Part No.

Diameter

Length Min/Max (mm)

Type

Code

List Price

228-FEMF012075

15mm / 1/2”

75/130

M/F Straight

$15.00

228-FEMF012100

15mm / 1/2”

100/200

M/F Straight

$16.00

228-FEMF012200

15mm / 1/2”

200/400

M/F Straight

$19.00

228-FEMF012260

15mm / 1/2”

260/520

M/F Straight

$21.00

228-FEMF034075

20mm / 3/4”

75/130

M/F Straight

$20.00

228-FEMF034100

20mm / 3/4”

100/200

M/F Straight

$21.00

228-FEMF034200

20mm / 3/4”

200/400

M/F Straight

$27.00

228-FEMF034260

20mm / 3/4”

260/520

M/F Straight

$29.00

228-FEMF100075

25mm / 1”

75/130

M/F Straight

$29.00

228-FEMF100100

25mm / 1”

100/200

M/F Straight

$31.00

228-FEMF100200

25mm / 1”

200/400

M/F Straight

$40.00

228-FEMF100260

25mm / 1”

260/520

M/F Straight

$45.00

228-FEMF114075

32mm / 1 1/4”

75/130

M/F Straight

$54.00

228-FEMF114100

32mm / 1 1/4”

100/200

M/F Straight

$55.00

228-FEMF114200

32mm / 1 1/4”

200/400

M/F Straight

$73.00

228-FEMF114260

32mm / 1 1/4”

260/520

M/F Straight

$78.00

228-FEMF112100

40mm / 1 1/2”

100/200

M/F Straight

$71.00

228-FEMF112200

40mm / 1 1/2”

200/400

M/F Straight

$83.00

228-FEMF112260

40mm / 1 1/2”

260/520

M/F Straight

$95.00

228-FEMF200100

50mm / 2”

100/200

M/F Straight

$95.00

228-FEMF200200

50mm / 2”

200/400

M/F Straight

$118.00

228-FEMF200260

50mm / 2”

260/520

M/F Straight

$120.00

Extendable stainless hoses are designed to connect water piping, they can extend to almost double original length and can be shaped to fit almost any installation. Note: may cause noise vibration with high flow rates and require lagging. Must not be installed under torsion stress, have bends tighter than specified or be in contact with rough surfaces. Technical Details: ■■ Maximum working pressure: see chart below. ■■ Tempreture -10 to 90 degrees. Materials ■■ Flex Stainless steel.

SPECIFICATIONS DN

DN15

Max Water Pressure

Max Bend Radius

8 Bar

30mm

DN20

8 Bar

40mm

DN25

8 Bar

45mm

DN32

5 Bar

50mm

DN40

5 Bar

55mm

DN50

5 Bar

60mm

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

390

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

VALVE & FITTINGS

Layflat Blue Std Duty Hose Kit

LAYFLAT BLUE HEAVY DUTY PVC HOSE Part No.

Hose Diameter mm

Roll Length

Code

List Price

227‑LF040010

10M

$35.00

227‑LF040020

20M

$70.00

227‑LF040050

50m

$175.00

227‑LF040100

100M

$350.00

227‑LF050010

10M

$55.00

227‑LF050020

20M

$110.00

227‑LF050050

50m

$275.00

227‑LF075010

10M

$105.00

227‑LF075020

20M

$210.00

227‑LF075050

50m

$525.00

• • • • *

-5° to +60° Temperature Anti UV Heavy Duty PVC 8 Bar MAX (working) 20 Bar MAX (breaking)

LAYFLAT BLUE HEAVY DUTY PVC KITS - TYPE C AND E COUPLINGS FITTED WITH TYPE F LOOSE Part No.

227‑LF040010K

Hose Diameter mm

Roll Length

Code

List Price

10M

$85.00

227‑LF040020K

20M

$120.00

227‑LF075010K

10M

$195.00

227‑LF050020K

20M

$170.00

227‑LF075010K

10M

$195.00

227‑LF075020K

20M

$295.00

Code

List Price

PVC SUCTION HOSE Part No.

Length

Hose Diameter mm

227-SH02505

5 mtr

25mm

$25.00

227-SH02510

10 mtr

25mm

$50.00

227-SH02520

20 mtr

25mm

$100.00

227-SH03205

5 mtr

32mm

$35.00

227-SH03210

10 mtr

32mm

$70.00

227-SH03220

20 mtr

32mm

$140.00

227-SH04005

5 mtr

40mm

$45.00

227-SH04010

10 mtr

40mm

$90.00

227-SH04020

20 mtr

40mm

$180.00

227-SH05005

5 mtr

50mm

$65.00

227-SH05010

10 mtr

50mm

$130.00

227-SH05020

20 mtr

50mm

$260.00

227-SH075005

5 mtr

75mm

$110.00

227-SH075010

10 mtr

75mm

$220.00

227-SH075020

20 mtr

75mm

$440.00

• • • • *

-5° to +60° Temperature Anti UV Ribbed Suction Hose with smooth internal walls 5 Bar MAX (working) 15 Bar MAX (breaking)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

391

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Contents Cam Lock Adapters

VALVE & FITTINGS

ALUMINIUM CAMLOCK ADAPTOR Part No.

Fitting

Size mm

Code

List Price

227-CL100A

Female Thread

25mm

$6.00

227-CL100B

Male Thread

25mm

$9.00

227-CL100C

Tail

25mm

$8.00

227-CL100D

Female Thread

25mm

$9.00

227-CL100E

Tail

25mm

$5.00

227-CL100F

Male Thread

25mm

$6.00

Fitting

Size mm

Code

List Price

227-CL114A

Female Thread

32mm

$6.00

227-CL114B

Male Thread

32mm

$10.00

227-CL114C

Tail

32mm

$9.00

227-CL114D

Female Thread

32mm

$10.00

227-CL114E

Tail

32mm

$6.00

227-CL114F

Male Thread

32mm

$6.00

Fitting

Size mm

Code

List Price

Part No.

227-CL112A

Female Thread

40mm

$7.00

227-CL112B

Male Thread

40mm

$12.00

227-CL112C

Tail

40mm

$10.50

227-CL112D

Female Thread

40mm

$12.00

227-CL112E

Tail

40mm

$7.00

227-CL112F

Male Thread

40mm

$7.00

Fitting

Size mm

Code

List Price

227-CL200A

Female Thread

50mm

$9.00

227-CL200B

Male Thread

50mm

$14.00

227-CL200C

Tail

50mm

$13.00

227-CL200D

Female Thread

50mm

$14.00

227-CL200E

Tail

50mm

$9.00

227-CL200F

Male Thread

50mm

$9.00

Fitting

Size mm

Code

List Price

227-CL300A

Female Thread

75mm

$14.00

227-CL300B

Male Thread

75mm

$23.00

227-CL300C

Tail

75mm

$18.00

227-CL300D

Female Thread

75mm

$23.00

227-CL300E

Tail

75mm

$14.00

227-CL300F

Male Thread

75mm

$14.00

Fitting

Size mm

Code

List Price

Hose clamp

25mm

$4.75

Part No.

HOSE CLAMP (T-BOLT CLAMP) Part No.

227-HC025 227-HC032

Hose clamp

32mm

$5.75

227-HC040

Hose clamp

40mm

$6.25

227-HC050

Hose clamp

50mm

$6.75

227-HC075

Hose clamp

75mm

$10.25

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

392

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Contents Pump Stands and Manifolds

VALVE & FITTINGS

BASE MOUNT PLATE – 500MM Part No.

228-DPS500

Length

Width

Code

List Price

500mm

320

$105.00

Material: ■■ 3mm Electro Galv. 250

230

125

18 15

140

320

230

500

BASE MOUNT PLATE – 800MM 506.14 Part No.

228-DPS800

Length

Width

Code

List Price

800mm

410

$185.00

Material: ■■ 3mm Electro Galv. 812

410

73 70

TANK MOUNT STAND Part No.

228-DPS501

Height

Hole Size

Code

List Price

260mm

33mm

$55.00

Material: 3mm Electro Galv.

■■

Wide range of base plates in galvanised or stainless for single, dual or triple booster sets - please contact Argon for details. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

393

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Thread Seal Compound Contents

VALVE & FITTINGS

SEALING TAPE PTFE Part No.

Length

Width

Thickness

Code

Price

12m

12mm

0.1

$1.50

710-70012

25m

15mm

0.1

$3.50

710-70013

50m

19mm

0.1

$7.00

710-70011

SEALING COMPOUND Part No.

710-SISEAL 710-SISEAL/S

Type

Size

Code

List Price

Standard

100g

$39.00

Quick Setting

100g

$41.00

PLASTIC MOULDED PUMP COVER Part No.

345‑707531

Code

List Price

MPG40

$190.00

Robust Plastic Molded Base & Cover to Protect Your Pump. Design Features: ■■ Designed to fit most common domestic pumps. ■■ Stackable design to reduce warehouse and shipping costs. ■■ Cooling vents designed to minimize water ingress. ■■ Easy to follow and trim entry points for simple installation of pipes. ■■ Simple to fasten cover to base to secure pump. ■■ Corrosion proof for long outdoor use. ■■ Easy to install. ■■ The pump can be easily mounted to the base. ■■ Base raises the pump safely up off the ground.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

394

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Index

397

PUMP CONTROL Pressure Gauges

398

401

Float Switches

402

401

414

Pressure tanks - Galvanized

Pump Auto Controllers

415

Alarm Box

Switchgenie Pump Control

420

Variable Speed Controllers

417

Level Probes And Controllers

421

Pressure Tanks/Stainless Steel

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Hi Temperature Cut Out Switch

409

406

Switchgenie Electronic Pressure Switch

Pressure Switches

419

Safematic

Paddle Flow Switches

405

412

401

422

Pressure Tanks/Fibre Glass

396

Pressure Tanks - Steel

Cycle Stop Valves

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Pressure Gauges

PRESSURE GAUGE REAR ENTRY 50MM Part No.

228-MC50-025 228-MC50-06 228-MC50-12 ABS Plastic housing

Pressure range

Diameter (Face)

Connection

Type

Code

List Price

Bar

PSI

0-2.5

0-35

50mm

¼”

Dry

$13.00

0-6

0-84

50mm

¼”

Dry

$13.00

0-12

0-174

50mm

¼”

Dry

$13.00

Diameter (Face)

Connection

Type

Code

List Price

PRESSURE GAUGE SIDE ENTRY 50MM Part No.

Pressure range Bar

PSI

228-MR50-025

0-2.5

0-35

50mm

¼”

Dry

$13.00

228-MR50-06

0-6

0-84

50mm

¼”

Dry

$13.00

228-MR50-12

0-12

0-174

50mm

¼”

Dry

$13.00

Diameter (Face)

Connection

Type

Code

List Price

ABS Plastic housing. PRESSURE GAUGE REAR ENTRY LIQUID FILLED 50MM Part No.

Pressure range Bar

PSI

228-DGX50-06C

0-6

0-84

50mm

¼”

Liquid

$24.00

228-DGX50-12C

0-12

0-174

50mm

¼”

Liquid

$24.00

Diameter (Face)

Connection

Type

Code

List Price

Stainless steel housing. PRESSURE GAUGE SIDE ENTRY LIQUID FILLED 50MM Part No.

Pressure range Bar

PSI

228-DGX50-06R

0-6

0-84

50mm

¼”

Liquid

$24.00

228-DGX50-12R

0-12

0-174

50mm

¼”

Liquid

$24.00

Connection

Type

Code

List Price

Stainless steel housing. PRESSURE GAUGE REAR ENTRY LIQUID FILLED 63MM Part No.

Pressure range Bar

Diameter (Face)

PSI

228-DGX63-06C

0-6

0-84

63mm

¼”

Liquid

$34.00

228-DGX63-12C

0-12

0-174

63mm

¼”

Liquid

$34.00

228-DGX63-25C

0-25

0-360

63mm

¼”

Liquid

$34.00

Diameter (Face)

Connection

Type

Code

List Price

63mm

¼”

Liquid

$34.00

Stainless steel housing. PRESSURE GAUGE SIDE ENTRY LIQUID FILLED 63MM Part No.

228-DGX63-06R

Pressure range Bar

PSI

0-6

0-84

228-DGX63-12R

0-12

0-174

63mm

¼”

Liquid

$34.00

228-DGX63-25R

0-25

0-360

63mm

¼”

Liquid

$34.00

Diameter (Face)

Connection

Type

Code

List Price

Stainless steel housing PRESSURE GAUGE SIDE ENTRY LIQUID FILLED 100MM Part No.

Pressure range Bar

PSI

228-DGX100-00R

-1 to 0

-30-0*

100mm

½”

Liquid

$34.00

228-DGX100-06R

0-6

0-84

100mm

½”

Liquid

$34.00

228-DGX100-25R

0-25

0-360

100mm

½”

Liquid

$34.00

Stainless steel housing (* inHg - Vacuum Gauge). Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

397

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Float Switches

FLOAT SWITCH - SUBMERSIBLE PUMP TYPE 4A - NEOPRENE CABLE Part No.

Max amps

Length

Contact type

Code

List Price

0.6M

Change over

$40.00

342-FOX-G04 Technical details: ■■ 250V rated.

FLOAT SWITCH - SUBMERSIBLE PUMP TYPE 8A - NEOPRENE CABLE Part No.

Max amps

Length

Contact type

Code

List Price

0.6M

Change over

$50.00

228-MS-4T

Technical details: ■■ 250V rated. ■■ Max Temp: 55oC. ■■ Hermetically sealed with expanded polyurethane. FLOAT SWITCH - SUBMERSIBLE PUMP TYPE 4A Part No.

Max amps

Length

Contact type

Code

List Price

0.6M

Double contact

$48.00

345-D210176

Technical details: ■■ 230V rated. ■■ Max liquid temp: 60oC.

FLOAT SWITCH - SUBMERSIBLE PUMP TYPE 8A Part No.

Max amps

Length

Contact type

Code

List Price

228-KO8-10

0.6M

Single contact

$50.00

FLOAT SWITCH - SUBMERSIBLE PUMP TYPE FLANGED 8A Part No.

Max amps

Length

Contact type

Code

List Price

0.6M

Single contact

$56.00

345-D210171

Technical details: ■■ 230V rated. ■■ Max liquid temp: 60oC. ■■ Tank emptying only.

18.5

FLOAT SWITCH - SUBMERSIBLE PUMP TYPE FLANGED 13A Part No.

Max amps

Length

0.6M

228-D210172

■■ ■■

Code

List Price

Single contact

$75.00

Technical details: ■■

Contact type

230V rated. Max liquid temp: 60oC. Tank emptying only.

18.5

FLOAT SWITCH - SUBMERSIBLE PUMP TYPE FLANGED 15A Part No.

Max amps

Length

0.6M

345-D210173 Technical details: 230V rated. ■■ Max liquid temp: 60oC. ■■ Tank emptying only.

Contact type

Code

List Price

Single contact

$110.00

■■

19 33

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

398

19.5

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Contents Float Switches

FLOAT CABLE MOUNT Part No

228-FK07

Description

FLOAT SWITCH CABLE MOUNTING KIT H07

Code

List Price

$13.00

The Float Switch Mount Kit is designed to mount the lead to pipework and protect the cables from damage due to weight and use. Supplied with cable ties, bracket and rubber protector.

OLYMPIC FLOAT SWITCH Part No

Max Amps

Length

Contact type

Code

List Price + GST

228-OPSF705

Single contact

$45.00

228-OPSF710

10m

Single contact

$67.00

The Olympic Float Switch is a simple single contact, emptying function float switch available with either a 5m or 10m lead and are suitable for up to 10 (8)A 250V. They have an activation angle of 45 degrees. It is recommended to use the 228-FK07 lead mounting kit to install to minimize the risk of lead damage.

TAURUS FLOAT SWITCH Part No

Max Amps

Length

Contact type

Code

List Price

228-TRDF710

10m

Double contact

$135.00

228-TRDF720

20m

Double contact

$212.00

The Taurus Float Switch is a robust level control float switch with either a 10 or 20m lead. The 3 core lead type allows for either emptying or filling function and has a unique design which allows the float to hang suspended in liquid once switched rather than floating to the surface, this reduces the activation angle to 20 degrees. It is recommended to use in pairs with one controlling minimum and the other controlling the maximum level. Suitable for level regulation in drainage plants, pumping stations and dirty water systems. It is recommended to use the 228-FK07 lead mounting kit to install to minimize the risk of lead damage.

MOUSE VERTICAL FLOAT SWITCH Part No.

Lead Length

Differential

Code

List Price

228-MOU0002

60-120

$60.00

228-MOU5005

60-420

$129.00

228-MOUPB

Mount Bracket Plastic

$10.00

228-MOUSB

Mount Bracket Stainless

$10.00

The Mouse vertical float switch is a level regulator suitable for narrow spaces where regular floats do not have enough moving space. It allows the users to adjust minimum and maximum levels by moving the floats fixed to the shaft with two different models to cover from 60-420mm differential. It also has a simple knob to lock the float in the on position to bypass level control if required. Technical Details: n n n n n

230Volt 10(8)Amp rated Max liquid temp: 50°C Max depth 15m Tank emptying IP68

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

399

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Float Switches

PIGGYBACK FLOAT SWITCH KIT Part No.

Max amps

Length

Contact type

Code

List Price

228-119260

10m

Single contact

$95.00

Technical details: ■■ ■■ ■■

230V 10m lead with AS/NZ Piggyback Plug Pipe Mount clip and band clamp

FLOAT SWITCH - SUBMERSIBLE PUMP TYPE VERTICAL - NEOPRENE CABLE Part No.

228-1034693

Max amps

Length

Contact type

Code

List Price

0.6m

Single contact

$77.00

Length

Contact type

Code

List Price

Technical details: ■■ ■■ ■■ ■■ ■■

230V rated. Max liquid temp: 50oC. Tank emptying only. Adjustable pumping range: 20-170mm. Minimum turn on water level: 50mm.

FLOAT SWITCH – PVC CABLE Part No.

Max amps

228-MSPVC2005

Change over

$52.00

228-MSPVC2010

10m

Change over

$62.00

Length

Contact type

Code

List Price

Technical details: ■■ ■■ ■■ ■■ ■■

250V rated. Max liquid temp: 55oC. Hermetically sealed with expanded polyurethane. Max working pressure: 10Bar. PVC Cable.

FLOAT SWITCH – NEOPRENE CABLE - NEOPRENE CABLE Part No.

Max amps

228-MTMCN2005

Change over

$69.00

228-MTMCN2010

10m

Change over

$91.00

Technical details: 230V rated. ■■ Hermetically sealed with expanded polyurethane. ■■ Max liquid temp: 55oC. ■■

FLOAT SWITCH – WEIGHTED TYPE - NEOPRENE CABLE Part No.

228-MTTC-B10

Max amps

Length

Contact type

Code

List Price

10m

Single contact

$205.00

Technical details: 230V rated. ■■ Max liquid temp: 60oC. ■■ Tank emptying only. ■■

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

400

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Paddle Flow Switches Hi Temperature Cut Out Switch

PUMP CONTROL

PADDLE FLOW SWITCH – 1”, 240V Part No.

228-FF82

Max Pressure

Temp Range

Amps

Pipe Size

Code

List Price

10Bar

-20-110°C

16 (6)

1-8”

$220.00

Technical details: n Protection IP65. n Construction materials – brass housing, 301 S/S paddles, Thermoplastic enclosure. n Maximum ambient temperature: 50°C. n Minimum and maximum flow rate data available on request. n Supplied with 3 paddles for up to 8” pipe.

FLOMAT - PADDLE FLOW SWITCH – 1”, 250VAC WITH DELAY TIMER Part No.

228-FLOMAT

Max Pressure

Max Temp

Amps

Pipe Size

Code

List Price

10Bar

100°C

10 (4)

1-4”

$260.00

Technical details: The FLOMAT paddle flow switch is equipped with a timer delay to allow the pump to start, adjustable from 0 – 10 seconds with a test button. ■■ When power is supplied to the FLOMAT the Control Relay pulls which allows the pump to start immediately. If after the time set the flow is not greater than 20l/m the FLOMAT will turn the pump off. It will also turn off should the flow stop at any time. ■■ The electrical components are housed in a separate enclosure to the paddle mechanism and is activated by a magnet located in the head of the paddle, which is made of glass reinforced polyamide. ■■ The FLOMATs high sensitivity allows control of flows down to 20l/m. ■■

HI-TEMPERATURE CUT OUT PUMP PROTECTOR SWITCH + 45OC Part No

Operating Temp

MAX Amps

Code

List Price

228-MAT–TE-45

45°C

$85.00

Mounts on the surface of a pump or pipe – very simple installation, no plumbing required Simply connect in series with Pump supply (or contact coil with 3 Phase). Indicator lamp shows when pump has overheated due to run-dry or deadhead fault conditions. Simple push button to reset when cooled.

SAFEMATIC Part No.

228‑SAFEMATIC

Volts

Code

List Price

230

0.37-2.2

$175.00

Electronic pump protection. This unit stops the pumps when it detects a dry running operation or overload. Technical details: n Dry-running protection with self learning of pump operation data. n Over current protection. n ART function. If the device has stopped due to the action of the safety system against dry operation, the ART tries to connect the pump, with a programmed periodicity because the water supply could have been restored. n Rapid-cycle alarm. n Failure, power and pump on led-lights.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

401

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Pressure Switches

SQUARE D – FSG 2 - PRESSURE SWITCH Part No.

228-FSG2

PSI

Bar

Pre-Set (cut in/cut out)

20-40

Phase

Code

List Price/Each 1-3

$38.00

$33.00

Max Amps: 8A/240V. ¼” female connection. ■■ Pressure range: 20-84psi. ■■ Enclosure: IP20. ■■ Fluid temperature: 0°C to +70°C. ■■ Stainless Nipple. The FSG2 pressure switch has an adjustable differential. When setting the pressure switch, adjust the switching point on rising pressure first and then the switching point on falling pressure. Switching point on falling pressure: The switching point on falling pressure is set by adjusting screw-nut 1. Switching point on rising pressure: The switching point on rising pressure is set by adjusting screw-nut 2. ■■ ■■

PUMPTROL – LOSS OF PRIME PRESSURE SWITCH Part No.

228-FSG2-LOP

PSI

Bar

Pre-Set (cut in/cut out)

20-40

Phase

Code

Phase

Code

List Price/Each 1-3

$82.00

$73.00

Low pressure cut out 10-15 psi below cut in pressure.

ITALITECNICA – PRE WIRED PRESSURE SWITCH Part No.

228-PM5-PW ■■ ■■ ■■ ■■ ■■ ■■ ■■

PSI

Bar

Pre-Set (cut in/cut out)

20-40

List Price/Each

1-3

$43.00

$37.00

Max Amps: 10A/250V. ¼” female connection. Pressure range: 1-5Bar. Minimum differential: 0.6Bar. Maximum Differential: 2.3Bar. Protection: IP44. Supplied complete with lead and plug.

ITALITECNICA – COMBINATION PRESSURE SWITCH/GAUGE/CONNECTION TEE Part No.

228-PM5-3W ■■ ■■

PSI

Bar

Pre-Set (cut in/cut out)

Phase

Code

List Price/Each

20-40

$53.00

Same technical specs as PM5-PW. Complete with integrated pressure gauge and three way fitting.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

402

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

2 1,3

PUMP CONTROL

Pressure Switches

0,2

1 1,8 2

6 bar

4,8

0,3

2 3,6 4

1 : Maximum differential 2 : Minimum differential

3 Pole 2

500

1,3

2 3,6 4

500 8 10 10,3

10 3,5

bar

0 0,1

$96.00

$58.00

$71.00 20,5 25 30 bar

1 1

PB = Low (cut in)

Equerre de fixation Befestigungswinkel Escuadra de fijación Squadra de fissaggio Esquadro de fixação

4,8

0,1

Verwenden Sie das Gerät innerhalb der im Katalog aufgeführten Kenndaten

Failure to follow these instructions can result equipment damage.

Le non-respect de ces instructions peut provoquer des dommages matériels.

Die Nichtbeachtung dieser Anweisungen kann zu Materialschäden führen.

Equipo dañado

Apparecchiatura danneggiata

Equipamento danificado

Utilice el equipo dentro de los límites de las características que se mencionan en el catálogo

Utilizzare l'apparecchiatura secondo le caratteristiche citate nel catalogo

Utilize o equipamento dentro das especificações mencionadas no catálogo

Si no se siguen estas instrucciones pueden producirse daños en el equipo.

Il mancato rispetto di queste istruzioni può danni alle apparecchiature.

A não observância destas instruções pode danos no equipamento.

228-XML-21003

Product

Thumbwheel

20,5 25

Il mancato rispetto di danni alle apparecchia

30 bar

W9 1560498 01 11 A02

XMP

Code

2 NC

Printed in

Gerät beschädigt

Utilisez l'équipement en respectant les caractéristiques mentionnées dans le catalogue.

W9 1560498 01 11 A02

Utilizzare l'apparecch caratteristiche citate n

3,5 Si no se siguen estas instrucciones pueden 0 producirse daños en el equipo.

1-9

10+

$7.00

$5.00

3 NC

2/2 List Price/Each

Part No.

características que se mencionan en el catálogo

1mm = 0.0394in.

THUMBWHEEL

38 54

Equipement endommagé

XMX/XMA

Apparecchiatura dan

10 el equipo dentro de los límites de las Utilice

Equipment damaged

1 : Maximum differential Use the equipment within the characteristics mentioned in catalogue 2 : Minimum differential

Equipo dañado

Le non-respect de ces des dommages matéri

1 1,8 2

12,5 18,5

Failure to follow these instructions can result equipment damage.

0 CAUTION / ATTENTION / VORSICHT / AVISO / ATTENZIONE / ATENCÃO 6 bar 0,3 2 3,6 4 8 10 10,3 bar 6

0,2

3,6 Ø4,2

2 1,3

Utilisez l'équipement e caractéristiques ment

Use the equipment within the characteristics mentioned in catalogue 25

Ø5,2

Equipement endomm

Equipment damaged bar

XMA ZL001

XML-ZL003

XMp p25 CAUTION / ATTENTION / VORS XMP-A25

XMp p12 Fixing bracket XMP-A12 bar 12

www.schneider-electr

24,75

Setting Réglage Einsellungen Adjustes Regolaziono Reglage

3 NC

2 NC

PH : High setting point - Point haut - Oberer Schaltpunkt - Punto de disparo superior - Punto di scatto superiore - Ponto alto PB : Low setting point - Point bas - Unterer Schaltpunkt - Punto de disparo inferior - Punto di scatto inferiore - Ponto baixo

XMp p06 XMP-A06

XML-ZL003

XMX / XMA / XMP bar 6

F E B E S E

PH = High (cut out)

XMP

Max: 3kW/400V, 1.5kW/230V. ¼” female connection.XMX/XMA Enclosure: IP54. Fluid temperature: -25°C to +70°C. PH Adjustable differential. Materials in contact with fluid: Canvas covered PB Nitrile, Chromated zinc alloy.

Setting Réglage Einsellungen Adjustes Regolaziono Reglage

$51.00

$43.00 PH : High setting point - Point haut - Oberer Schaltpunkt - Punto de di PB : Low setting point - Point bas - Unterer Schaltpunkt - Punto de dis

1 : Maximum differential 2 : Minimum differential

■■

3 pole0,3

6 bar

■■

4,8 12

■■

1 1,8 2

■■

$39.00

20 15

$48.00

500

0,2 174

500

XMp p25

228-XMP-A12C

B bar30

84 1

2 pole 2 pole 6

228-XMP-A06C

12 25

500

3 350

2 pole bar

174

228-XMP-A25B

XMp p12

228-XMP-A12B

www.schneider-electric.com 1-9 10+

bar 84 6

List Price/Each

XMp p06

228-XMP-A06B

Code

XMX / XMA / XMP

Max Volts

Contact Type (NC)

Bar

PSI

Part No.

TELEMECANIQUE – XMP PRESSURE SWITCH

XMX/XMA

PRESSURE SWITCH KIT PH : High setting point - Point haut - Oberer Schaltpunkt - Punto de disparo superior - Punto di scatto superiore - Ponto alto PB : Low settingPSI point - PointBar bas - Unterer Schaltpunkt - Punto - Punto List di scatto Part No. Contact Max Volts de disparo Type inferior Code Price inferiore - Ponto baixo Type

Setting 345-800633 20-40 Réglage Einsellungen 345-800634 30-50 Adjustes PrewiredRegolaziono with IEC Plug. Reglage

1.4-2.8

2 Pole

250V

2.0-3.5

2 Pole

250V

Fixing bracket 1 Ph B $105.00 Equerre de fixation Befestigungswinkel 1Ph B $115.00 Escuadra de fijación Squadra de fissaggio Esquadro de fixação

XMA ZL001

XML-ZL003

Ø5,2

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Ø4,2 Website www.argondistributors.co.nz

403

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

3,6

PUMP CONTROL

Pressure Switches XMX / XMA / XMP

www.schneider-electric.com

XMp p06

XMp p12

bar 6

Part No.

PSI

Bar

Contact Type CO 2

228-XMX-A12L

174

1 Pole

Max Volts

1 Pole

1 : Maximum differential 2 : Minimum differential

240

■■ ■■ ■■ ■■ ■■

350-MDR2-11

174

3,5 0 0,1

10 10,3 bar

20,5 25

30 bar

3 4

1 2

13 14

3 NC

Contact Type NC

2 pole

Contact Type

XMP

Setting Réglage Einsellungen Adjustes Regolaziono Reglage

Max Volts

500

Fixing bracket Equerre de fixation

Code

Befestigungswinkel List Price Escuadra de fijación

B XML-ZL003

XMA ZL001

Squadra de fissaggio Esquadro de fixação

$79.00

Ø5,2

3,6 Ø4,2

12,5 18,5

38 54

1mm = 0.0394in.

CAUTION / ATTENTION / VORSICHT / AVISO / ATTENZIONE / ATENCÃO

PRESSURE SWITCH CONDOR AIR COMPRESSOR TYPE Bar

2 NC

PSI

2 3,6 4

$95.00

Features On/Off control knob and decompression valve. ¼” female connection and push fit decompression tube entry. Enclosure: IP54. Adjustable range of switching point on: 0.3 – 10.3Bar. Adjustable range high setting: 1.3 – 12Bar. Fluid temperature: -25°C to +70°C. 3.0Kw - 400V/1.5Kw - 230V.

Part No.

$81.00

Equipment damaged

Equipement endommagé

Gerät beschädigt

Use the equipment within the characteristics mentioned in catalogue

Utilisez l'équipement en respectant les caractéristiques mentionnées dans le catalogue.

Verwenden Sie das Gerät innerhalb der im Katalog aufgeführten Kenndaten

Failure to follow these instructions can result equipment damage.

Le non-respect de ces instructions peut provoquer des dommages matériels.

Die Nichtbeachtung dieser Anweisungen kann zu Materialschäden führen.

dañado Type MaxEquipo Volts

2 Pole

List Price

Apparecchiatura danneggiata

Equipamento danificado

Utilice el equipo dentro de los límites de las características que se mencionan en el catálogo

Utilizzare l'apparecchiatura secondo le caratteristiche citate nel catalogo

Utilize o equipamento dentro das especificações mencionadas no catálogo

Si no se siguen estas instrucciones pueden producirse daños en el equipo.

Il mancato rispetto di queste istruzioni può danni alle apparecchiature.

A não observância destas instruções pode danos no equipamento.

250V

Technical details: ■■ Max 2.2KW rated. ■■ 4 Port connection.

Code

1Ph

$135.00

W9 1560498 01 11 A02

2/2

PRESSURE SWITCH CONDOR AIR COMPRESSOR TYPE – 3PH Part No.

PSI

Bar

Contact Type

Max Volts

Amps

Type

Code

List Price

350-MDR3-DOL-6-10

150

3 Pole

400V

6-10

3Ph

$430.00

350-MDR3-DOL-10-16

150

3 Pole

400V

10-16

3Ph

$465.00

Technical details: ■■ DOL pressure switch with 6.3 – 10Amp overload protection. ■■ Single port connection.

SWITCHGENIE 15 ELECTRONIC PRESSURE SWITCH - 3PH Part No.

228-SG15

PSI

Bar

Amps

Volts

Code

List Price

174

400

$295.00

The SG15 has all the features of the single phase SG12, but with 400V, 3 phase supply. It is a fullcontrol system for a 3 phase pump up to 4.4 Kw (5.5Hp)

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

404

Printed in

■■

0,3

■■

174

228-XMP-E12B

Bar

2 1,3

XMX/XMA

TELEMECANIQUE – XMP – AIR COMPRESSOR TYPE PSI

6 bar

XMX type For control circuits with adjustable differential. Rated operational characteristics: 240vac=1.5A, 120V =3A, 250VDC=0.1a. ¼” female connection. Enclosure: IP54. Fluid temperature:-25°C to +70°C.

Part No.

4,8

■■

24,75

■■

240

■■

1 1,8 2

List Price

■■

0,2

Code

350

228-XMX-A25L

TELEMECANIQUE – XMX

bar 30

bar 12

XMp p25

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP ACCESSORIES

Switchgenie Electronic Pressure Switch

SWITCHGENIE 10 ELECTRONIC PRESSURE SWITCH Part No.

PSI

Bar

Amps

Volts

Code

List Price

228-SG10

174

230

$95.00

228‑SG10T

174

230

$149.00

It provides pump run dry protection via minimum pressure loss of prime function with auto reset function (ART) and rapid cycling protection in case of pressure tank failure with an LCD display to show either operating or set pressure values and an alarm light to indicate if there is a system fault.

The Switchgenie 10 is an electronic pressure switch for settings up to 12 bar with simple adjustable digital cut in/ cut out pressure settings and an integral pressure gauge to control a pump up to 2.2kw (16A) single phase.

The standard SG10 is installed like a conventional pressure switch with 1/4″ female port on the back or is also available as SG10T with an integral tee and non-return valve and two 25mm female ports for tank/discharge and a 25mm male port for pump. Features:: Easy pressure setting and adjustment.Low Power sleep mode. ■■ Integral digital pressure gauge (bar/psi). ■■ Minimum pressure LOP protection with auto restart. ■■ Start/Stop delay timer ■■ Anti-cycle mode to reduce starts in case of tank failure. ■■

Technical Details: ■■ Cut in pressure range 0.5-11 bar. ■■ Cut out pressure range 1-12 bar. ■■ Maximum differential 11.5 bar. ■■

Minimum differential (adjustable) 0.5 bar.

■■

IP55.

■■

Max water temp 50 degrees.

■■

Max ambient 60 degrees.

SWITCHGENIE 12 ELECTRONIC PRESSURE SWITCH Part No.

PSI

Bar

Amps

Volts

Code

List Price

228-SG12

174

230

$139.00

228‑SG12T

174

230

$175.00

N EW

The Switchgenie 12 is an electronic pressure switch for up to 12 bar with simple adjustable digital cut in/cut out pressure settings, overload protection and an integral pressure gauge to control a pump up to 2.2kw (16A) single phase. It also provides smart pump run dry, over-current and rapid cycling protection and can be set up to control two pumps as a pair and alternate operation with an LCD display to show either operating or set pressure values and an alarm light to indicate if there is a system fault. The standard SG12 is installed like a conventional pressure switch with 1/4″ female port on the back or is also available as SG12T with an integral tee and non-return valve and two 25mm female ports for tank/discharge and a 25mm male port for pump. Features::

Technical Details:

Easy pressure adjustment and settings.

■■

Cut in pressure range 0.5-11 bar.

Low Power sleep mode.

■■

Cut out pressure range 1-12 bar.

Current overload protection.

■■

Maximum differential 11.5 bar.

Integral digital pressure gauge (bar/psi).

■■

Minimum differential (adjustable) 0.5 bar.

■■

Run dry protection with minimum current with auto restart.

■■

IP55.

■■

Minimum pressure LOP protection with auto restart.

■■

Max water temp 50 degrees.

■■

Anti-cycle mode to reduce starts in case of tank failure.

■■

Max ambient 60 degrees.

■■

3 operation modes (differential/inversed differential/dual).

■■

Synchronous operation for two pumps with cascade or alternate starts.

■■ ■■ ■■ ■■

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

405

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Pump Auto Controllers

TEKNOFLOW FLOW SWITCH Part No.

228-TEKFLO

Volts

Max Amps

Turn on flow

Prewired

Code

List Price

230

1l/min

$125.00

Technical details: ■■ Max pressure: 16Bar. o ■■ Operating temperature range: -0 to +65 C. ■■ Connection Thread: 1” male. ■■ Protection: IP65. ■■ Minimum pump pressure: No minimum. ■■ Maximum pump pressure: 16Bar. COMPACT 2 PUMP CONTROLLER Part No.

228-CTCC15

Volts

Max Amps

Turn on pressure

Prewired

Code

List Price

230

1.5Bar

YES (male plug only)

$146.00

Technical details: ■■ Max pressure: 10Bar. ■■ Operating temperature range: -0 to +60ºC. ■■ Connection Thread: 1” male. ■■ Protection: IP65. ■■ Minimum pump pressure: 2.5Bar. ■■ Maximum pump pressure: 10Bar. ■■ Automatic reset/restart following run dry.

Includes Pressure gauge

PRESSCONTROL PUMP CONTROLLER Part No.

Volts

Max Amps

Turn on pressure

Prewired

Code

List Price

4+ List Price ea/unit

228-WTPCU

230

1.5bar

$210.00

$175.00

228-CTWTPCU

230

1.5bar

YES

$230.00

$195.00

228-WTPCU22

230

2.2bar

$210.00

$175.00

228-CTWTPCU22

230

2.2bar

YES

$230.00

$195.00

$120.00

$110.00

228-WTPCU-PCB

Replacement Circuit module

Technical details: ■■ Max pressure: 10Bar. ■■ Operating temperature range: -0 to +60ºC. ■■ Connection Thread: 1” male. ■■ Protection: IP65. ■■ Minimum pump pressure: 3.0Bar (3.5bar for 2.2bar cut in version). ■■ Maximum pump pressure: 10Bar.

GENIUNE ITALIAN PRESSCONTROL

Pressure Loss Table Flowrate (L/M)

100

125

Loss (bar)

0.2

0.55

0.95

Pre wired option

MASCONTROL PUMP CONTROLLER Part No.

Volts

Max Amps

Turn on pressure

Prewired

Code

List Price

228-WTMCU22

230

2.2

$310.00

Technical details: ■■ Max pressure: 10Bar. ■■ Operating temperature range: -0 to +60ºC. ■■ Connection Thread: 1¼ ” male. ■■ Minimum pump pressure: 3.5Bar. ■■ Maximum pump pressure: 10Bar.

GENIUNE ITALIAN MASCONTROL

Pressure Loss Table Flowrate (L/M)

100

125

150

175

200

Loss (Bar)

0.1

0.2

0.4

0.7

1.3

1.6

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

406

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Pump Auto Controllers

HYDROGENIE 1 PUMP CONTROLLER Part No.

Volts

Max Amps

Turn on pressure

Pre Wired

Code

List Price

4+ List Price ea/unit

228-HG1

230

1.5Bar

$152.00

$138.00

228-CT-HG1

230

1.5Bar

YES

$178.00

$158.00

Technical details: ■■ Max pressure: 10Bar. ■■ Operating temperature range: -0 to +60ºC. ■■ Connection Thread: 1” male. ■■ Minimum pump pressure: 3.2Bar. ■■ Maximum pump pressure: 10Bar. Pressure Loss Table Flowrate (L/M)

100

125

Loss (Bar)

0.2

0.6

1.1

Pre wired option

HYDROGENIE 2 PUMP CONTROLLER Part No.

Volts

Max Amps

Turn on Pressure

Prewired

Code

List Price

4+List Price ea/unit

228-HG2

230

1.5

$195.00

$17600

228-CT-HG2

230

1.5

YES

$215.00

$196.00

$22.00

$20.00

228-HG023

Pressure Gauge

Technical details: ■■ Max pressure: 12Bar. ■■ Operating temperature range: -0 to +60ºC. ■■ Connection Thread: 1” male. ■■ Minimum pump pressure: 3.0Bar. ■■ Automatic reset/restart following run dry: If the pump runs dry the controller will attempt to re-prime 10 times over 24hours, each attempt lasting 5 seconds. ■■ 24H Anti-Jam function: If the pump remains idle for 24 consecutive hours the controller will run the pump for 5 seconds to prevent the pump from jamming.

Pre wired option

Pressure Loss Table Flowrate (L/M)

100

125

Loss (Bar)

0.2

0.5

0.95

24 Hour Anti-Jam Function

Pressure gauge option

HYDROGENIE 3 PUMP CONTROLLER Part No.

Volts

Max Amps

Turn on Pressure*

Prewired

Code

List Price

4+List Price ea/unit

228-HG3

230

1.5-2.5

$230.00

$208.00

228-CT-HG3

230

1.5-2.5

YES

$250.00

$228.00

$22.00

$20.00

228-HG023

Pressure Gauge

Technical details: ■■ Max pressure: 12Bar ■■ Operating temperature range: -0 to +60ºC. ■■ Connection Thread: 1” male. ■■ *Cut In Pressure: Adjustable cut in pressure: 1.5, 2.0 & 2.5Bar via the control panel. ■■ Minimum pump pressures (depending on user set cut in pressure): 1.5Bar = 3.0Bar 2.0Bar=3.5Bar 2.5Bar =4.0Bar. ■■ Automatic reset/restart following run dry: If the pump runs dry the controller will attempt to re-prime 10 times over 24hours, each attempt lasting 5 seconds. ■■ 24H Anti-Jam function: If the pump remains idle for 24 consecutive hours the controller will run the pump for 5 seconds to prevent the pump from jamming. Pressure Loss Table Flowrate (L/M)

100

125

Loss (Bar)

0.2

0.5

0.95

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

Adjustable Cut-in Pressure

407

24 Hour Anti-Jam Function

Pre wired option

Pressure gauge option

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Pump Auto Controllers

HYDROGENIE 4 PUMP CONTROLLER Part No.

228-HG4

Volts

Phase

Max Amps

Turn on Pressure*

Prewired

Code

List Price

230

See operating modes below

$410.00

HYDROGENIE 5 PUMP CONTROLLER Part No.

228-HG5

Volts

Phase

Max Amps per phase

Turn on Pressure*

Prewired

Code

List Price

230 or 400

1 or 3

See operating modes below

$630.00

Technical details for HG4 & HG5: ■■ Max pressure: 10Bar. ■■ Operating temperature range: 0 to +40oC. ■■ Connection Thread: 1 ¼” male. ■■ Protection: IP55. ■■ Electronic over current protection. ■■ Run Dry protection.

1Ph or 3Ph

Motor Overload Protection

*Operating modes: The Hydrogenie 4 and 5 controllers have two operating modes: On/Off mode: Pump starts when pressure drops to set turn on pressure–adjustable between 1 & 5 Bar. Pump stops when no flow is detected. (The pump must be able to supply 0.5Bar more than turn on pressure). Pressure dependent mode: Pump starts when pressure drops to set turn on pressure – adjustable between 0 & 6.5Bar. Pump stops when pressure reaches set turn off pressure– adjustable between 1 & 7Bar. (turn off pressure must be 1Bar above turn on pressure). A pressure tank must be included in the system, the size depends on the mode the controller is in. For On/Off mode anything from 2 - 50litres will work fine. For Pressure dependent mode, the tank needs to be sized the same as in a conventional pressure switch type installation. It is recommended to use connection unions when installing. See page ??? Additional features: ■■ Digital display: shows instantaneous motor current, system pressure, set pressure, flow sensor position during normal operation. ■■ Start/stop delay: 0-10 seconds start delay. 0-60 seconds stop delay. ■■ Dry run restart: Following a dry run event the controller will attempt a restart 5min after and every 30min for 24hours if the problem persists. ■■ Over Current: In the event the current rises above the set point the controller will turn off the pump and attempt a restart 4 times, if after the 4th attempt the current is still above set point the controller will remain off. ■■ HG4 has an alarm register. ■■ HG5 has a volt free alarm contact and minimim level contact. Flowrate (L/M)

100

150

200

250

Loss (Bar)

0.1

0.4

0.9

1.6

2.5

HYDROGENIE 4 & 5 BYPASS KIT Part No.

Inch

Code

List Price

228-HG45-112

1½

$375.00

228-HG45-200

$475.00

For flows greater than 250lpm we recommend a bypass kit. This allows around 75% of the flow to bypass the controller. *Controller not included. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

408

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Variable Speed Controllers

HYDROGENIE 8 PUMP CONTROLLER - INVERTER Part No.

228-HG8

Input

Output

Max Amps per phase

Prewired

Code

List Price

230V 1Ph

230V 1Ph or

9A 230V 1Ph

$1030.00

230V 3Ph

10A 230V 3Ph

HYDROGENIE 10 PUMP CONTROLLER - INVERTER Part No.

228-HG10

Input

Output

Max Amps per phase

Prewired

Code

List Price

400V 3Ph

$1495.00

Technical details for HG8 & HG10: ■■ Frequency inverter type controller. ■■ Max pressure: 15Bar. ■■ Operating pressure range: 0.5 to 12Bar. ■■ Operating temperature range: 0 to +40oC. ■■ Connection Thread: 1 ¼” male. ■■ Protection: IP55. ■■ Electronic over current protection. ■■ Run Dry protection. ■■ Over/Under voltage protection.

1Ph or 3Ph

Variable Speed Control

Additional features: ■■ Digital display: Shows instantaneous motor current, system pressure, set pressure, flow sensor position during normal operation. ■■ Dry run restart: Following a dry run event the controller will attempt a restart 5min after and every 30min for 24hours if the problem persists. ■■ Over Current: In the event the current rises above the set point the controller will turn off the pump and attempt a restart 4 times, if after the 4th attempt the current is still above set point the controller will remain off. ■■ Under Voltage protection- In the event of low voltage the controller stops the pump and remains off until the voltage increase. ■■ Over voltage protection- In the event of high voltage the controller stops the pump and remains off until the voltage decreases. ■■ Ice/Frost protection – In the event the temperature in the controller drops below 5oc the pump will run periodically to prevent the water freezing. ■■ Alarm register: All alarm events are recorded including Short circuits, Over current, Over temp, Dry run. ■■ Operation register: Records Pump run hours, Number of cycles (start and stop) and Number of connections to the power supply. ■■ Dual pump control: Two HG controllers can be configured to work in parallel and auto alternate. ■■ Minimum level switch contacts. ■■ Volt free alarm contact option available. It is recommended to use connection unions when installing. See page ??? Flowrate (L/M)

100

150

200

250

Loss (Bar)

0.1

0.4

0.9

1.6

2.5

Hydrogenie 8

Hydrogenie 10

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

409

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP ACCESSORIES

Hydrogenie Motor Mounted Inverter Pump Controller

Part No.

HYDROGENIE 15-17 MOTOR MOUNTED INVERTER PUMP CONTROLLER Input

Output

Max Amps per phase

Code

List Price

228-HG15

230V 1Ph

230V 3Ph

10A 230V 3Ph

$930.00

228-HG16

400V 3Ph

5A 400V 3Ph

$1150.00

228-HG17

400V 3Ph

9A 400V 3Ph

$1250.00

The Davies Hydrogenie motor mount pump controllers are designed to be installed directly to the motor terminal box of a 3 phase pump motor. They provide energy savings in a variable duty application and control and protect the pump. They require either 230v single phase or 400v three phase supply and can be operated as single or a pair for communication and alternate starting. The inverter monitors and adjusts the pump speed to a pre-set limit via an external transducer installed in pipework. The controller has simple pump logic and is fast and simple to set up and offers complete pump protection against overcurrent, over/under voltage, short circuit and dry running. The LCD screen displays system and set duty points and electrical data. 1Ph or 3Ph

Variable Speed Control

Operating Features: ■■ Frequency inverter for variable pump control. ■■ Suitable to mount to range of motor sizes - contact Argon Distributors for options. ■■ ART function (Automatic Reset Test). If the device has been stopped due to the action of the safety system against dry operation, the ART tries to connect the pump, with a programmed intervals and will instant pump if supply has been restored. ■■ Automatic restore system after an interruption of power supply. System restores the previous state keeping the configuration parametres. ■■ Electronic input for detection of minimum water level in supply tank optional. This system is independent of the safety system against dry running operation. ■■ Option for Volt-free contact for monitoring the alarms displayed in screen originated by irregularities or problems of the system. ■■ Control and information panel with LCD screen. ■■ Output 4-20 mA for an external pressure transducer. ■■ Supplied with 0-10 bar transducer (see photo, max cable length 15mtr). ■■ Inner current sensor with instantaneous digital reading. ■■ Register of operational controls. Information about: operating hours, number of starts, number of connections to the power supply. ■■ Register of alarms. Information about type and number of alarms recorded since the start up of the device. ■■ Aluminium heat exchanger. ■■ Cooling by forced convection by the fan of the motor with an intelligent temperature management system. ■■ Two pump control: Two HG controllers can be configured to work in parallel and auto alternate. ■■ IP65 or maximum of motor. ■■ Minimum level switch contacts

Transducer

HG-16

Safety System: ■■ Control and safety system against overcurrent with auto restart. ■■ Electronic control and safety system against dry-running operation with auto restart. ■■ Control and safety system against wrong supply voltage with auto restart. ■■ Control and safety system against short-circuit between output phases.

HG-15, HG-17

Not supplied with Motor Connection Adapters - Please contact Argon for details Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

410

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP ACCESSORIES

Hydrogenie Wall Mounted Inverter Pump Controller

HYDROGENIE 20-23 WALL MOUNTED INVERTER PUMP CONTROLLER Part No.

Input

Output

Max Amps per phase

Code

List Price

228-HG20

230V 1Ph

230V 3Ph

6A 230V 3Ph

$940.00

228-HG21

230V 1Ph

230V 3Ph

10A 230V 3Ph

$1015.00

228-HG22

400V 3Ph

5A 400V 3Ph

$1155.00

228-HG23

400V 3Ph

9A 400V 3Ph

$1355.00

The Davies Hydrogenie wall mount pump controllers are designed to be installed close to a pump in a dry location and provide energy savings in a variable duty application and control and protect the pump. They require either 230v single phase or 400v three phase supply and can be operated as single or a pair for communication and alternate starting. The inverter monitors and adjusts the pump speed to a pre-set limit via an external transducer installed in pipework. The controller has simple pump logic and is fast and simple to set up and offers complete pump protection against overcurrent, over/under voltage, short circuit and dry running. The LCD screen displays system and set duty points and electrical data. 1Ph or 3Ph

Variable Speed Control

Operating Features: ■■ Frequency inverter for pump control. ■■ Automatic restore system after an interruption of power supply. System restores the previous mode keeping the configuration parameters. ■■ ART function (Automatic Reset Test) Electronic input for detection of minimum water level in aspiration tank optional. This system is independent of the safety system against dry running operation. ■■ Option for Volt-free contact for monitoring the alarms displayed in screen originated by irregularities or problems of the system. ■■ STC function (Smart Temperature Control): If the temperature of the electronic circuit is over 85ºC it will automatically reduce the frequency of the pump and decrease the generation of heat but keep the system operating. ■■ Output 4-20 mA for external pressure transducer. ■■ Control and information panel with LCD screen. ■■ Supplied with 0-10 bar transducer (see photo, max cable length 15mtr). ■■ Inner current sensor with instantaneous digital reading. ■■ Register of operational controls. Information about: operating hours, number of starts, number of connections to the power supply. ■■ Register of alarms. Information about type and number of alarms recorded since the start up of the device. ■■ Aluminium heat exchanger. ■■ Cooling by natural or forced convection depending on the model. ■■ Two pump control: Two HG controllers can be configured to work in parallel and auto alternate. ■■ IP65. ■■ Motor supply cable max 30mtr (min 1.5mm) shielded. ■■ Minimum level switch contacts.

Transducer

Safety System: ■■ Control and safety system against overload with auto restart. ■■ Electronic control and safety system against dry-running operation with auto restart. ■■ Control and safety system against wrong supply voltage with auto restart. ■■ Control and safety system against short-circuit between output phase.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

411

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Contents Switchgenie Single Pump Control Panel

SWITCHGENIE SINGLE PUMP CONTROLLER Part No.

Power Supply

Amps

Code

List Price

228-SG20

230V

0.5-3

0.37-2.2

2-16

$495.00

228-SG25

400V

0.75-10

0.55-7.5

2-15

$585.00

228-SG26

400V

10-15

7.5-11

16-24

$665.00

The Davies Switchgenie SINGLE control panel is designed to control one pump DOL either tank filling or emptying in clean or waste water applications. It provides pump protection with self learning of pump operating data, including run dry failure and monitoring of power supply and motor limits. Simple and fast to install with electrical main lock out switch and easy to use operating menu with LCD screen and status indicator lights. Three standard models with single or three phase power supply to operate motors from 0.37Kw to 11Kw and cover a wide range of applications with float switches, probes, pressure switch or pressure transducer inputs. STANDARD FEATURES n n n n n n

Motor Status Indicator LED’s LCD Display to set parameters and view data ABS Box with main disconnect switch and lock Hinged door with latch and lock point External mounting points for panel IP55 Protection

n n n n n n

Ambient temperature -5/50 deg (humidity 50% @ 40 deg) Adjustable power on delay Alarm Outputs, 12Vdc, N.O. Contact, 230V or 400V. Provision for single phase motor start capacitors Separate motor Klixon overload input Separate water in seal chamber input

Max

Start/stop Max Start/stop

Min

KEY H

Clear water float

Pressure Switch Start/stop

Pump Max Min

Waste water float

Level Probe Min

COM

Level Probe

Pressure Switch

pressure transducer Max

Start

Start/stop

Stop Start/stop Min

Waste water Float

Start/stop

Float

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

412

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Contents Switchgenie Dual Pump Control Panel

SWITCHGENIE DUAL CONTROLLER Part No.

Power Supply

Amps

Code

List Price

228-SG30

230V

0.5-3

0.37-2.2

2-16

$560.00

228-SG35

400V

0.75-10

0.55-7.5

2-15

$820.00

228-SG36

400V

10-15

7.5-11

16-24

$1350.00

The Davies Switchgenie DUAL control panel is designed to control two pumps DOL either tank filling or emptying in clean or waste water applications. It provides pump protection with self learning of pump operating data, including run dry failure and monitoring of power supply and motor limits. Simple and fast to install with electrical main lock out switch and easy to use operating menu with LCD screen and status indicator lights. Three standard models with single or three phase power supply to operate motors from 0.37Kw to 11Kw and cover a wide range of applications with float switches, probes, pressure switch or pressure transducer inputs. DUAL MODEL EXTRA FEATURES n Single Panel for potable or waste water applications n Self Learning of Pump motor Data n If pump 1 fails, pump 2 starts automatically n Works with floats, pressure switches or probes n Self holding setting n 4-20mA input for pressure transducer n Pumps operate independently n Dry Run Protection by minimum Cos Fi (2 pumps in different tanks with different logics) n Min/Max Water Level Alarm n Pumps start in cascade sequence with changeover n Phase Failure Protection n Duty Standby Logic n Automatic Failure Restart System n Max Hourly Pump Start Limit n 24H Timer Start/Stop n Alarm Outputs H H H H

Max

Pump 2 Start

Pump 2 Start/Stop

Pump 1 Start

Pump 1 Start/Stop

Stop

Min

KEY

Pressure Switch Pump 1 Start/stop

Pressure Switch Pump 2 Start/stop

Level Probes

Clear water float Min

Pump

Waste water float

Max P1 Start/stop

Level Probe

P2 Start/stop

Pressure Switch P2 Start/stop

P1 Start/stop

Min

pressure transducer

Start/stop H

Start/stop

H Start/stop

Min

P1 P2 Start/stop

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

413

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP ACCESSORIES

Alarm Box

ALARM BOX Part No.

228-LS1-230

Power Supply

Light/Buzzer

Code

List Price

230V

YES

$245.00

Power Supply

Light/Buzzer

Code

List Price

230V AC/12-24V DC

YES

$293.00

ALARM BOX Part No.

228-LS12-24-230

Technical details: ■■ The LS Alarm Panel is designed to provide an audio and visual warning alarm when activated by a separate pump control system input. ■■ When the alarm is activated, the Mute button can be pressed once to silence the audio siren and again to turn off the red flashing LED while system is repaired. ■■ The alarm can operate with 12VDC, 24VDC or 230V 50/60Hz power supply. It has a N/O volt free contact which can be used to activate the alarm directly from a float level switch or alarm signal input. ■■ It is supplied in an IP55 enclosure and comes with two cable glands for installing wiring. The Audio siren is 90db at 30cm with rated voltage.

ALARM BOX KITSET Part No.

228-LKIT

Power Supply

Light/Buzzer

Code

List Price

230V AC/12-24V DC

YES

$375.00

The alarm box can also be supplied as a kit set with 3 pin plug, power lead and 10m change over (NO/NC) float switch to provide tank high or low level warning.

Kit Set

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

414

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Level Probes and Controllers

TRANSDUCERS Part No.

Value

Fitting

Lead

Code

List Price

228-TR10

0-10

¼“BSP

$185.00

228-TR16

0-16

¼“BSP

$185.00

LEVEL PROBE SINGLE POLE Part No.

Type

Code

List Price

Single pole

$20.00

Type

Code

List Price

Double pole with lead -1M

$65.00

228-SONDA SL100 ■■ ■■

Diameter: 20mm. Length: 97mm.

LEVEL PROBE DOUBLE POLE Part No.

228-SONDA N100 ■■ ■■

Diameter: 30mm. Length: 152mm.

LEVEL PROBE CABLE Part No.

Size

Length

Code

List Price

1mm

100M

$300.00

Part No.

Volts

Output relay

Code

List Price

350-SD320-00

230

12A

$195.00

Volts

Output relay

Code

List Price

240

8A (20A)

$275.00

228-WSE17043

LEVEL PROBE CONTROL

■ ■ ■ ■ ■ ■ ■ ■ ■

LEVEL PROBE CONTROL PANEL Part No.

228-SQ2 Conﬁg 1.

Conﬁg 2.

Conﬁg 3.

NC NC

PUMP 9

com 24v 240v 380v

Live

250v 8A relay

11 1

Live

SubMatic

MAN

LEVEL 3

AUTO

POWER

PUMP 9

SubMatic

MAN

LEVEL 3

AUTO

PUMP

POWER 2

SubMatic

MAN

LEVEL

AUTO

POWER

com

250v 8A relay

Live

250v 8A relay

24v 240v 380v

Neutral Max

Min Common

Earth

Tank ﬁlling or pressure switch system and dry run control with three probes

Neutral

Max

Min

Probes or ﬂoat switches

Earth

Tank ﬁlling or pressure switch system and dry run control with two probes or two ﬂoat switches

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

415

Tank ﬁlling or pressure switch system and dry run control with ﬂoat switch

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Level Probes and Controllers

SAFETY CABLE Part No.

Size

Code

List Price

228-CAX-MM3

3mm

$3.90/M

228-CAX-MM4

4mm

$4.20/M

Suit Cable Size

Code

List Price

3 & 4mm

$4.75

■

316 Stainless steel.

SAFETY CABLE CLAMPS Part No.

228-MOR49X ■

316 Stainless steel.

SAFETY CABLE THIMBLE Part No.

Suit Cable Size

Code

List Price

228-MORA55204

3 & 4mm

$4.25

Cable Size

Code

List Price

228-14164

1.5-2.5mm

$25.00

228-10124

3-6mm

$30.00

Cable Size

Code

List Price

1.5-2.5mm

$50.00

Cable Size

Code

List Price

5x1.5-6mm2

$75.00

Length

Code

List Price

200m

$720.00

■

316 Stainless steel.

JOINTING KIT HEAT SHRINK Part No.

JOINTING KIT CLEAR CAST Part No.

228-CCM0

JOINTING KIT - KING JOINT Part No.

228-KJ-0 ■ ■ ■ ■

Rapid gel filled joint for extruded multi core 0,6/1 kv cables up to 5 cores. Re-enterable. Re-useable. Fully submersible (IP68).

DEPTH FINDER Part No.

228-DMT200

The DMT200 is a portable device for checking water levels in wells and bores. An Audible alarm sounds when water is detected. Cable marked in 100mm increments.

BORE CAP Part No.

345-110590

Size

Code

List Price

190mm x 2” BSP

$165.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

416

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Pressure Tanks Steel

PRESSURE TANK FLEXPANSION – VERTICAL THREAD MOUNTED Part No.

Litre

Thread

Max Pressure

Code

List Price

450-DPV-2

2.8

1”/25mm

10Bar/145PSI

$55.00

450-DPV-8

1”/25mm

10Bar/145PSI

$8200

450-DPV-18

1”/25mm

10Bar/145PSI

$99.00

450-DPV-24

1”/25mm

10Bar/145PSI

$125.00

Features: Fixed Butyl membrane. ■■ Polypropylene liner. ■■ Stainless steel thread connection. ■■ Baked epoxy coated exterior. ■■ Maximum temperature: 90ºC. ■■

DIMENSIONS Model

DPV-2

204

140

1.4

DPV-8

300

202

2.5

DPV-18

380

276

4.2

DPV-24

420

290

4.7

PRESSURE TANK FLEXPANSION – HORIZONTAL MOUNT Part No.

Litre

Thread

Max Pressure

Code

List Price

1”/25mm

10Bar/145PSI

$133.00

450-DPH-24

1”/25mm

10Bar/145PSI

$163.00

450-DPH-58

1”/25mm

10Bar/145PSI

$360.00

450-DPH-80

1”/25mm

10Bar/145PSI

$451.00

450-DPH-18

Features: Fixed Butyl membrane. ■■ Polypropylene liner. ■■ Stainless steel thread connection. ■■ Plastic pump mount and feet (18 & 24l models). ■■ Metal pump mount and feet (58 & 80L models). ■■ Baked epoxy coated exterior. ■■ Maximum temperature: 90ºC. ■■

DIMENSIONS Model

DPH-18

380

310

156

4.5

DPH-24

420

320

162

5.0

DPH-58

530

430

212

10.5

DPH-80

720

430

212

13.0

B C

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

417

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Pressure Tanks Steel

PRESSURE TANK FLEXPANSION – FREE STANDING Part No.

Litre

Thread

Max Pressure

Code

List Price

450-DPF-58

1”/25mm

10Bar/145PSI

$328.00

450-DPF-80

1”/25mm

10Bar/145PSI

$41000

450-DPF-130

130

1¼”/32mm

10Bar/145PSI

$680.00

450-DPF-160

160

1¼”/32mm

10Bar/145PSI

$855.00

450-DPF-235

235

1¼”/32mm

10Bar/145PSI

$1090.00

450-DPF-305

305

1¼”/32mm

10Bar/145PSI

$1298.00

List Price

Features: Fixed Butyl membrane. ■■ Polypropylene liner. ■■ Stainless steel thread connection. ■■ Plastic support stand (58 & 80L models). ■■ Metal support stand (130 to 305L models). ■■ Baked epoxy coated exterior. ■■ Maximum temperature: 90ºC. ■■

DIMENSIONS Model

DPF-58

560

390

11.5

DPF-80

680

390

DPF-130

760

560

DPF-160

910

560

DPF-235

1180

560

DPF-305

1430

560

PRESSURE TANK - VAREM HIGH PRESSURE 16Bar Part No.

Litre

Thread

Max Pressure

Code

450-VVA16BV20

1”

16Bar/230PSI

$320.00

450-VVA16BV100

100

1”

16Bar/230PSI

$1150.00

Features: Replaceable Butyl membrane/Bladder. ■■ Galvanized steel thread connection/Flange plate. ■■ Baked epoxy powder coated exterior. ■■ Minimum/Maximum operating temperature: -10 to +99ºC. ■■

DIMENSIONS Model

Diameter

Height

VVA16BV20

250

509

VVA16BV100

453

915

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

418

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Pressure Tanks - Galvanised

DGP GALVANISED PRESSURE TANKS Part No.

Litre

Thread

Max Pressure

Code

List Price

450-DGP-100

100

1”/25mm

10Bar/145PSI

$745.00

450-DGP-200

200

1 ½”/40mm

10Bar/145PSI

$1475.00

450-DGP-300

300

1 ½”/40mm

10Bar/145PSI

$1625.00

450-DGP-500

500

1 ½”/40mm

10Bar/145PSI

$2925.00

Features: Replaceable Butyl membrane/Bladder. ■■ Galvanised tank body, flange connection and support legs. ■■ Minimum/Maximum operating temperature: -10 to +99ºC. ■■ Pre charge pressure: 2.0Bar. ■■

DIMENSIONS B

DGP-100

Model

450

910

185

DGP-200

550

1250

185

DGP-300

620

1400

185

DGP-500

780

1460

185

2 Year warranty Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

419

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Pressure Tanks - Stainless steel

DSV STAINLESS STEEL PRESSURE TANK - VERTICAL Part No.

Litre

Thread

Max Pressure

Code

List Price

1”

8Bar/115PSI

$372.00

450-DSV-20

Features: Replaceable Butyl membrane/Bladder. ■■ 304 stainless steel thread connection/Flange plate. ■■ 304 stainless steel tank body. ■■ Minimum/Maximum operating temperature: -10 to +99ºC.

■■

DIMENSIONS Model

450-DSV-20

465

265

DSH STAINLESS STEEL PRESSURE TANK - HORIZONTAL Part No.

Litre

Thread

Max Pressure

Code

List Price

1”

8Bar/115PSI

$405.00

450-DSH-20

Features: Replaceable Butyl membrane/Bladder. ■■ 304 stainless steel thread connection/Flange plate. ■■ 304 stainless steel tank body, feet and pump mount plate. Minimum/Maximum operating temperature: -10 to +99ºC. ■■

DIMENSIONS Model

DSH-20

280

470

140

280

C D

DSF STAINLESS STEEL PRESSURE TANK – FREE STANDING Part No.

Litre

Thread

Max Pressure

Code

List Price

450-DSF-50

1”

8Bar/115PSI

$1045.00

450-DSF-100

100

1”

8Bar/115PSI

$1710.00

Features: ■■ Replaceable Butyl membrane/Bladder. ■■ 304 stainless steel thread connection/Flange plate. ■■ 304 stainless steel tank body, feet and pump mount plate. ■■ Minimum/Maximum operating temperature: -10 to +99ºC. A

DIMENSIONS A

DSF-50

Model

780

370

150

DSF-100

895

500

170

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

C B

420

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Pressure Tanks - Fiber Glass

WELLMATE FIBERGLASS TANKS – MAX PRESSURE 8.6BAR / 125PSI Part No.

Litre

Connection

Old Part Number

Code

Replacement Cell Price

List Price

440-WM 0060

1”

WM 4

$259.00

$620.00

440-WM 0075

1”

WM 6

$205.00

$715.00

440-WM 0120

112

1”

WM 9

$255.00

$920.00

440-WM 0180

178

1¼”

WM 14

$355.00

$1140.00

440-WM 0235

227

1¼”

WM 20

$416.00

$1280.00

440-WM 0330

328

1¼”

WM 25

$440.00

$1515.00

440-WM 0450

453

1¼”

WM 35

$555.00

$2150.00

The Pentair Wellmate Classic series of pressure tanks are 100% composite construction that is scratch, dent and corrosion resistant with a fully replaceable aircell. With a range of sizes from 55 to 450 litres they are a light weight but high strength tank designed for ease of installation, servicing and unmatched durability. Technical Features/Benefits: Durable interior air cell - fully replaceable. n One piece, seamless inner shell moulded of premium high density polyurethane. n Outer shell is a composite of continuous fiberglass strands sealed with high grade epoxy resin. n Sturdy mould polyment base is corrosion and impact proof. n Bottom inlet/outlet is custom moulded of high impact PVC. n

DIMENSIONS Model No.

Diameter

Height

Weight Kg

Replaces conventional tank (GAL)

WM 0060

410

660

6.6

WM 0075

410

810

8.1

WM 0120

410

1120

11.2

WM 0180

530

1050

19.5

WM 0235

610

1050

22.7

130

WM 0330

610

1400

180

WM 0450

610

1890

43.1

250

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

421

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Cycle Stop Valves

What are cycle stop valves? The Cycle Stop Valve is a patented pump control valve that makes a variable flow pump out of any standard constant speed pump. Attached to the discharge of the pump the Cycle Stop Valve automatically chokes back the output of the pump to match the uses requirements for water. As the flow decreases the amperage draw decreases as well. The Cycle Stop Valve (CSV) maintains a constant pressure for the water user regardless of the amount of water being used - providing the pump has the capacity. The CSV is completely mechanical requiring no electronics. Large pumps are now capable of very small flows without expensive controls, huge pressure tanks, or water towers. Pumps equipped with a CSV can operate safely from as low as 4 lpm to as much as the pump can produce. The CSV stops pump cycling, eliminates water hammer, extends pump life and reduces energy costs. The CSV can deliver constant pressure to an entire city with a pressure tank as small as 120 litres.

CSV1Z STAINLESS STEEL Part No.

229-CSV1A

Size

Pressure range

Code

List Price

1”female

15-150

$440.00

1¼” male Materials ■■ 304 Stainless Steel. ■■ Composite bell housing. ■■ EDPM with Dacron cloth insert diaphragm. ■■ Replaceable acetal cartridge. Pressure-temperature ■■ Maximum temperature – 82°C. ■■ Maximum shut off head – 400psi. ■■ Maximum differential pressure –125psi. ■■ Adjustable pressure 15-150psi. Features ■■ 4-94 lpm. ■■ Variable flow with reduced pressure. ■■ Tank fill rate 4LPM. ■■ All internal parts corrosion resistant and included in a drop in cartridge. ■■ NPT Threads.

CSV2W1.25 BRONZE Part no.

Size

Pressure range

Code

List Price

229-CSV2W125

1¼”

50-120

$960.00

Materials n Bronze body construction. n Renewable stainless steel seat. n Reinforced Buna N diaphragm. n Buna N valve disc. Pressure-Temperature n n n n

Maximum temperature – 72°C. Maximum shut off head – 300psi. Maximum differential pressure – 125psi. Adjustable pressure 50-120psi.

Features n 15-185LPM. n Variable flow with reduced pressure. n Tank fill rate 4LPM. n Can be converted to pressure range 25-75psi. n NPT Threads. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

422

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Cycle Stop Valves

CSV3B-CAST IRON Part No.

Size

Connection

Code

List Price

229-CSV3B2T

2”

Thread

$1480.00

229-CSV3B3F

3”

Flange

$2780.00

Materials n Body

and cover: polyester coated cast iron.

n Diaphragm

retainer in and spring: stainless steel.

n Diaphragm:

natural rubber; nylon fabric reinforced.

Features n Sizes n Flow

2”, 3” threaded or flanged, 4”, 6”, 8”, 10”and 12” flanged. ranges between 18 and 22500LPM.

n Maintains

constant outlet pressure.

n Single

chamber diaphragm operated.

n Single

one moving part design.

Pressure – Temperature n Max

temp 82°C.

n Max

shutoff head – 225 psi.

n Pressure

ranges 2”:25 – 175psi.

n 3”-12”:15-150psi. n Max

differential pressure – 125psi.

n Min

friction loss – 14psi (for low pressure applications the diaphragm spring can be

removed, this can drop the friction loss to about 7psi).

The friction loss chart below is for fully open valves (example application; flow – 130gpm. Pressure – 30psi, pressure before valve is 42psi – friction loss through valve is 12psi.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

423

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PUMP CONTROL

Notes Contents

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

424

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PARTS

MiniBlaze & Blazemaster - Loncin Engine

PARTS

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

425

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Index MiniBlaze & Blazemaster - Loncin Engine

PARTS

427

428

PUMP & MOTOR PARTS Cooling fans

429

Motor Switch Plates

433

430

Centrifugal Switches

434

Schurter Motor Overloads

437

Run Capacitors - Spade Terminal

440

439

Taper Bush V-Grooved Pulley

Ball Bearings

442

445

436

Capacitor Accessories

Run Capacitors - Can

Seals - Type 16

Motor Overloads

435

438

441

431

Capacitor Boxes

Start Capacitors

Run Capacitors - Lead

Motor Fan Cowls

443

Seals - Type 68

444

Seals - Type 55

446

447

Seals - Type 21

SEAlS Argon Replacement Seal Selection

293

452

EnginEERing 298

Conversion Factors

ARgOn DiSTRiBUTORS REPlACEMEnT SEAl SElECTiOn ChART Model

Part no

100M/16 61M/16 61M/16 200M/6 61M/16 100M/16 61M/16 36/200T 100M/16 100M/16 36/200T 100M/16 36/200T 200M/6 100M/16 41M/16 41M/16

Seal Data

Argon Replacement Part no list Price

Size

Type

3/4 32mm

T68 R3

410-88236 410-86732

$49.05 $129.00

5/8

T68

410-88226

$25.18

5/8

T16

410-88214

$18.23

15mm 13mm 13mm 17mm 13mm 15mm 13mm 25mm 22mm 15mm 15mm 22mm 15mm 22mm 17mm 15mm 12mm 12mm

R3 T55 T55 R3 T55 R3 T55 R3 R3 R3 R3 R3 R3 R3 R3 R3 T55 T55

410-86715 410-84753 410-84753 410-86717 410-84753 410-86715 410-84753 410-86725A 410-86722 410-86715 410-86715 410-86722 410-86715 410-86722 410-86717 410-86715 410-84752 410-84752

$29.68 $25.60 $25.60 $34.55 $25.60 $29.68 $25.60 $70.97 $61.43 $29.68 $29.68 $61.43 $29.68 $61.43 $34.55 $29.68 $19.35 $19.35

5/8 16mm 1/2 22mm 1/2 16mm 5/8 3/4 5/8 3/4 5/8 3/4 5/8 3/4 5/8 3/4 5/8 1/2 5/8 5/8 1/2 1/2 5/8 1/2 5/8

T68 T21 SIC T16 R3 T16 T21 SIC T16 T16 T16 T16 T16 T16 T16 T16 T16 T16 T68 T68 T68 T68 T68 T68 T68 T16 T16

1” 5/8 16mm

T16 T68 T21 SIC

49021 48802SP 49021 48801SP 48800SP 47863

16mm 1/2 16mm 5/8 1” 5/8

T21 SIC T16 T21 SIC T16 T16 T68

30736 48802SP 49021 48802SP 49021 48802SP

1/2 1/2 16mm 1/2 16mm 1/2

T68 T16 T21 SIC T16 T21 SIC T16

$15.53 $35.09 $15.53 $16.96 $15.53 $16.96 $15.53 $16.96 $15.53 $16.96 $15.53 $16.96 $25.18

Mechanical Seal Type 89

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

$15.53

$39.56 $25.18 $35.09

410-88211*

410-88211* 410-88211*

$15.53 $15.53 $35.09 $15.53 $35.09 $15.53

Percentage of Rated Capacity 80% 70% 57% 40% 25% 17%

Litres 15 per min. 15 per min. @ 140 kPa 35 - 60 per day 70 - 100 per day 50 - 60 per day 4 - 9 per day 9 per day 23 per day 45 per min. @ 140 kPa 75 per min. @ 140 kPa

$35.09 $15.53 $35.09 $15.53 $39.56 $25.18

Seal Selection Chart 426

Application Shower Lawn Sprinkler Cattle Milking Cows Horses Sheep Pigs 100 Chickens 1/2” Tap 3/4” Tap

$25.18

410-88211*

Total Suction Head (Metres) 3.0 4.6 6.1 7.6 8.5 8.8

Water Requirements

$25.18 $25.18 $15.53

410-88230 * 410-88226*

Gall per Minute 1 0.01667 13.2 0.22 0.833 3.666 220 6.23

Square Measure:

Length Equivalents: 1 league 1 mile 1 furlong

= = =

Volume Imp US Galls Litres Galls 1 4.546 1.2 0.22 1 0.264 0.833 3.785 1 6.23 28,317 7.48 0.1 0.4546 0.12 220 1000 264 271,378 325,828

3 miles 8 furlongs 40 poles

1 chain

= =

100 links

1 fathom

6 feet

(Feet) 10 15 20 25 28 29

Use 410-80020

410-88214* 410-88230 * 410-88226* 410-88210C 410-88210* 410-88211*

Flow

Reduction of capacity with centrifugal pump suction

$25.18 $35.09 $15.53

Free Phone 0508 634 341. Fax 09 634 7417. Email sales@argondistributors.co.nz Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE.

Seals - Type R3

1 Sq mile 1 Sq km 1 Acre

lbs Cubic Acre Cubic Water Metre Feet Inch 10 0.00455 277.34 2.2 0.00100 61.02 8.333 0.00379 231.06 62.3 0.02832 1728 1 0.00046 27.820 2200 1 0.00081 61.032 2,713,788 1234 1 -

Fluid Equivalents: 1 gallon

2 pints 4 gills

1 gill

5 ozs

Aq. foot x 1 inch

Surface area sphere Volume of cylinder Volume of sphere

1 HP

746 watts

33,000 ft. Ibs per min 550 ft. Ibs per sec.

Heat and Energy: 1 kW/hour

3.6 Meg Joule

3412 BTU/hour

Free Phone 0508 634 341. Fax 09 634 7417. Email sales@argondistributors.co.nz Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE.

Engineering - Conversion Factors

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

πD

πD2÷4 πD2

πD2H÷4

1/6πD3

H =

height

π = 3.142

I =

Impeller

Pressure varies as RPM2 or I2 Power varies as RPM3 or I3 Volume varies as RPM

= = =

D = diameter

Pump Affinity Laws: (F -32) x 5/9 (C x 9/5) + 32

10,000 sq. metres 2.471 acres

Circle Formulas: Area of circle

1 litre 0.52 gall

= =

Power:

640 acres, 259 hectare 247 acres, 100 hectare 4,840 sq. yards 43,560 sq. feet 4 roods 0.4047 hectare 40 perches, rod, pole 30.25 sq. yards

107,640 sq. feet 10.764 sq feet

Water boils at 100˚C, or 212˚F Water freezes at 0˚C, or 32˚F

= =

Temperature:

= = = = =

Circumference of circle

Water Catchment Volume:

Centrigrade Fahrenheit

= =

= = 1 Rood 1 Hectare

1 Sq feet

4 quarts 10 Ibs (water)

= =

Sq. metre x 1mm

Weight

= =

1 quart 1 pint

= =

4 poles 66 feet

1 Perch

Cubic Feet 0.1605 0.0353 0.1337 1 0.0161 35.32 43,560

Cooling MiniBlazeFans & Blazemaster - Loncin Engine

PARTS

MOTOR COOLING FANS - FOR METRIC FRAME MOTORS Part no.

Frame size

Shaft Ø

Diameter

Code

List Price

342-445000001

11.5mm

110mm

$13.00

342-445000002

14mm

130mm

$16.00

342-445000007

15mm

130mm

$19.00

342-295202005

17mm

144mm

$20.00

342-445000003

19mm

144mm

$22.00

342-295202001

24mm

160mm

$28.00

342-445000005

100

28mm

176mm

$34.00

342-444000011

132

38mm

230mm

$55.00

342-444000012

160

44mm

295mm

$62.00 1. BCB Ext/Int

MOTOR COOLING FANS – FOR FASCO, BROOK CROMPTON & CMG MOTORS Part no.

Motor

Picture

Shaft Ø

Diameter

Code

List Price

330-334-040-1

BCB Ext

5/8”

125mm

$32.00

330-334-040-2

BCB Int

17mm

125mm

$40.00

330-334-040-6

BCB Int

22mm

125mm

$32.00

330-334-048-2

Fasco QTL

13mm

100mm

$16.00

330-334-048-1

Fasco 6 series

16mm (Slotted)

115mm

$28.00

330-334-046-1

Fasco 7 series

16mm (Slotted)

125mm

$32.00

330-334-042-1

BCB/Crompark

5/8”

152mm

$44.00

330-334-042-2

Fasco 9 Series

15mm

152mm

$44.00

Fasco FAL

16.5mm/Flat

150mm

$19.00

330-788-55614

CMG

14mm/Key

160mm

$43.00

330-788-55617

CMG

17mm/Key

160mm

$43.00

330-788-509217

CMG

17mm

160mm

$43.00

330-FAL90-201-FAN

2. Fasco QTL

3. Fasco 6/7 Series

Picture type 6 suits Fasco Industrial series, please enquire regarding this type.

4. BCB/Crompark Fasco 9 Series

MOTOR COOLING FANS - CMG METRIC MOTORS Part no.

Frame size

Picture

Shaft Ø

Code

List Price

330-HLA-90-FAN

24mm

$30.00

330-HLA-100-FAN

100

28mm

$35.00

330-HLA-112-FAN

112

28mm

$40.00

330-HGA-132FAN

132

38mm

$50.00

330-HGA-160-FAN

160

42mm

$70.00

330-HGA-180-FAN

180

52mm

$80.00

330-HGA-225-FAN

225

60mm

$275.00

5. 16.5mm/Flat

6. CMG

7. Industrial Series Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

427

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Motor Fan &Cowls MiniBlaze Blazemaster - Loncin Engine

PARTS

MOTOR FAN COWLS Part no.

Frame size/Suits

Material

Picture

Diameter

Depth

Code

List Price

330-357-031-2

Fasco QTL

Plastic

115

$35.00

330-357-031-1

Fasco 6 Series

Plastic

128

$35.00

330-357-028-2

Fasco 7 Series

Plastic

148

$37.00

330-357-023-1

Fasco 9 Series

Plastic

160

$37.00

330-792-5448B

CMG

Plastic

170

$55.00

330-FAL90-201-FC

FAL90-201/202

Metal

170

$33.00

330-HGA-100-FC

100 Frame

Metal

195

$85.00

330-HGA-112-FC

112 Frame

Metal

220

$95.00

330-HGA-132-FC

132 Frame

Metal

258

110

$120.00

330-HGA-160-FC

160 Frame

Metal

310

160

$150.00

330-HGA-180-FC

180 Frame

Metal

350

198

$180.00

330-HGA-200-FC

200 Frame

Metal

397

220

$200.00

330-HGA-225-FC

225 Frame

Metal

445

233

$220.00

Diameter is measured across the inside and at the shortest point i.e were the cowl touches the motor.

We have a large range of fan cowls in stock. Email a photo to sales@argondistributors.co.nz with dimensions.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

428

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Motor Switch Plates MiniBlaze & Blazemaster - Loncin Engine Centrifugal Switches

PARTS

MOTOR SWITCH PLATES Part no.

Suits

Type

Picture

Code

List Price

330-428-167-02

Fasco CO1

2 Terminal

$55.00

330-FAL90-201-SWP

Fasco FAL

2 Terminal

$45.00

330-SZCP18

Various

18mm Hole

$58.00

330-SZCP25

Various

25mm Hole

$80.00

CMG

Horseshoe

$50.00

Crompton

Double Contact

$95.00

330-726-55930 330-CPSW2

MOTOR CENTRIFUGAL SWITCHES Part no.

Suits

Bore

Type

Picture

Code

List Price

330-316-024-1

C01 Fasco

19mm

2 pole

$55.00

330-316-024-2

C01 Fasco

19mm

4 pole

$55.00

330-FAL90-201-CF

FAL901/902

19mm

2 pole

$40.00

330-728-853C1100

CMG

21mm

4 Pole

$25.00

330-728-853C2000

CMG

21mm

2 Pole

$43.00

Springs not available separately.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

429

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Capacitor Boxes MiniBlaze & Blazemaster - Loncin Engine

PARTS

MOTOR CAPACITOR COVER/ENCLOSURES Part no.

Suits

Details

Picture

Code

List Price

330-344-086-1

Various

Length 114mm

$26.00

330-344-089-1

Various

Length 144mm

$27.00

330-335-011-1

6 Series

“L” Shaped

$29.00

330-335-010-2

7 Series

Complete

$50.00

330-334-112-2

7 Series

Lid Only

$27.00

330-335-004

9 Series

Complete

$50.00

FAL901/902

Complete

$40.00

330-50640B

CMG

Base only

$30.00

330-50650B

CMG

Lid Only

$30.00

330-FAL90-201-TBC

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

430

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PARTS

Motor Overloads MiniBlaze & Blazemaster - Loncin Engine

FPM TYPE – MANUAL RESET OVERLOAD Part no.

Amps

Code

List Price

311-14650-005 311-14650-010 311-14650-015 311-14650-020 311-14650-025 311-14650-030 311-14650-035 311-14650-040 311-14650-045 311-14650-050 311-14650-055 311-14650-060 311-14650-065 311-14650-070 311-14650-075 311-14650-080 311-14650-085 311-14650-090 311-14650-095 311-14650-100 311-14650-105 311-14650-110 311-14650-115 311-14650-120 311-14650-125 311-14650-130 311-14650-135 311-14650-140 311-14650-145 311-14650-150 311-14650-155 311-14650-160

0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0

B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B

$48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00

Part No.

Amps

Code

List Price

311-14651-02 311-14651-025 311-14651-03 311-14651-035 311-14651-04 311-14651-045 311-14651-05 311-14651-055 311-14651-060 311-14651-065 311-14651-07 311-14651-075 311-14651-08 311-14651-085 311-14651-09

2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0

B B B B B B B B B B B B B B B

$48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00 $48.00

Amps

Code

List Price

1.0 2.0 3.0 4.0

B B B B

$44.00 $44.00 $44.00 $44.00

Snap acting single pole line break overload with manual reset button, connections are via solder lugs. Mounting via 12mm thread for panel mounting.

FPA TYPE – AUTO RESET OVERLOAD

Snap acting single pole line break overload. Restarts automatically when temperature has reached normal operating temperature. Connections are via solder lugs. Mounting via 12mm thread for panel mounting.

FA TYPE – AUTO RESET OVERLOAD Part No.

311-14653-01 311-14653-02 311-14653-03 311-14653-04

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

431

Snap acting single pole line break overload. Restarts automatically when temperature has reached normal operating temperature. Connections are via solder lugs. Mounting in motor terminal cover.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PARTS

Motor Overloads MiniBlaze & Blazemaster - Loncin Engine

FM TYPE – MANUAL RESET OVERLOAD Part No.

Amps

Code

List Price

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

B B B B B B B B B B

$44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00

Part No.

Amps

Code

List Price

311-14654-01 311-14654-02 311-14654-025 311-14654-03 311-14654-035 311-14654-04 311-14654-045 311-14654-05 311-14654-055 311-14654-06 311-14654-065 311-14654-07 311-14654-075 311-14654-08 311-14654-085 311-14654-09 311-14654-095 311-14654-10 311-14654-12 311-14654-14 311-14654-15

1.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 12.0 14.0 15.0

B B B B B B B B B B B B B B B B B B B B B

$44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00

Part No.

Amps

Code

List Price

311-14655-02 311-14655-03 311-14655-04 311-14655-05 311-14655-055 311-14655-06 311-14655-07 311-14655-075 311-14655-08 311-14655-085 311-14655-09 311-14655-095 311-14655-10 311-14655-105 311-14655-12

2.0 3.0 4.0 5.0 5.5 6.0 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 12.0

B B B B B B B B B B B B B B B

$44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00 $44.00

311-14652-01 311-14652-02 311-14652-03 311-14652-04 311-14652-05 311-14652-06 311-14652-07 311-14652-08 311-14652-09 311-14652-10

Snap acting single pole line break overload. Manual reset button. Connections are via solder lugs. Mounting in motor terminal cover.

EM TYPE – MANUAL RESET OVERLOAD

Snap acting single pole line break overload. Manual reset button. Connections are via solder lugs. Lug mounting for inside terminal cover.

EA TYPE – AUTO RESET OVERLOAD

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

432

Snap acting single pole line break overload. Restarts automatically when temperature has reached normal operating temperature. Connections are via solder lugs. Lug mounting for inside terminal cover.

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Schurter Overloads- Loncin Engine MiniBlazeMotor & Blazemaster

PARTS

SCHURTER MOTOR OVERLOADS Part no.

Amps

Type

Code

List price

311-14670-015 311-14670-02 311-14670-03 311-14670-04 311-14670-05 311-14670-06 311-14670-07 311-14670-08 311-14670-09 311-14670-10 311-14670-11 311-14670-12 311-14670-13 311-14670-14 311-14670-15 311-14670-16 311-14671-17 311-14671-18 311-14671-19 311-14671-20

1.5A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 12A 13A 14A 15A 16A 17A 18A 19A 20A

T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T13 T13 T13 T13

B B B B B B B B B B B B B B B B B B B B

$19.00 $19.00 $19.00 $19.00 $19.00 $19.00 $19.00 $19.00 $19.00 $19.00 $19.00 $19.00 $19.00 $19.00 $19.00 $19.00 $38.00 $38.00 $38.00 $38.00

SCHURTER PVC PROTECTOR COVER Part no.

311-14675

Fits

Code

List price

T11 and T13 type

$6.00

The T11/T13 series of circuit breakers for equipment is a line of small single pole push to reset overload protective devices. The trip mechanism is of the superior latch type meaning a high contact force can be maintained until the unit trips. This prevents electrical noise due to contact bounce and reduces the risk of contact welding which may occur with spring type mechanism. The overload sensing is done with the aid of a thermal bimetal which has the advantage of being immune to high inrush currents and line transients. All T11 and T13 units are positively trip free. The contacts will open and remain open during an overload. Contacts cannot be held in the closed position and they will not close automatically even the closing command is maintained. Dimensions T11: 11 x 18 x 34 T13: 14 x 29 x 47

DOL MOTOR STARTERS Model No.

Amp Range

Volts

Code

List Price

Overload Only Part No.

List Price

350-M35N-708

1.8-2.6

0.75

415

$155.00

311-LR2-K0308

$85.00

350-M35N-710

2.6-3.7

1.5

415

$155.00

311-LR2-K0310

$85.00

350-M35N-712

3.7-5.5

2.2

415

$155.00

311-LR2-K0312

$85.00

350-M35N-714

5.5-8

415

$165.00

311-LR2-K0314

$85.00

350-M35N-716

8-11.5

415

$165.00

311-LR2-K0316

$85.00

350-M35N-721

10-14

5.5

415

$175.00

311-LR2-K0321

$85.00

350-M35N-722

12-16

7.5

415

$175.00

311-LR2-K0322

$98.00

350-M35U-714

5.5-8.0A

0.75

230

$155.00

311-LR2-K0314

$85.00

350-M35U-716

8-11.5

1.1

230

$155.00

311-LR2-K0316

$85.00

350-M35U-721

10-14

1.8

230

$155.00

311-LR2-K0321

$85.00

350-M35U-722

12-16

2.2

230

$155.00

311-LR2-K0322

$98.00

IP65 polycarbonate enclosure. M35 starters all come complete with overload. n Mechanical “on” Latch included. n

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

433

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PARTS

Start Capacitors MiniBlaze & Blazemaster - Loncin Engine

110V Part No.

MFD

Dimensions diameter x length (mm)

Code

Price

312-110-590A

590-708

46 X 86

$40.00

312-110-708A

708-850

46 X 86

$59.00

125V MFD

Dimensions diameter x length (mm)

Code

Price

312-125-108A

Part No.

108-130

37 X 70

$26.00

312-125-130A

130-156

37 X 70

$26.00

312-125-145A

145-175

37 X 70

$26.00

312-125-161A

161-193

37 X 70

$26.00

312-125-189A

189-227

37 X 86

$2800

312-125-216A

216-256

37 X 86

$30.00

312-125-243A

243-292

37 X 86

$32.00

312-125-270A

270-324

37 X 86

$33.00

312-125-340A

340-408

46 X 86

$36.00

312-125-400A

400-480

46 X 86

$38.00

312-125-645A

645-774

46 X 86

$42.00

312-125-708

708-849

65 X 111

$58.00

312-125-800A

800-900

65 X 111

$63.00

312-125-829A

829-995

65 X 111

$65.00

165V MFD

Dimensions diameter x length (mm)

Code

Price

312-165-88A

Part No.

88-108

37 X 70

$24.00

312-165-124A

124-149

37 X 70

$25.00

312-165-149A

149-165

37 X 86

$26.00

312-165-161A

161-193

37 X 86

$35.00

312-165-189A

189-227

46 X 86

$37.00

312-165-243A

243-292

46 X 111

$38.00

312-165-270

270-324

46 X 111

$39.00

220V Part No.

312-220-53A

MFD

Dimensions diameter x length (mm)

Code

Price

53-64

37 X 70

$34.00

250V MFD

Dimensions diameter x length (mm)

Code

Price

312-250-25A

Part No.

25-30

37 X 86

$22.00

312-250-30A

30-36

37 X 86

$23.00

312-250-36A

36-43

37 X 86

$24.00

312-250-40A

40-48

37 X 86

$25.00

312-250-47A

47-56

37 X 86

$26.00

312-250-53A

53-64

37 X 86

$28.00

312-250-64A

64-77

46 X 86

$30.00

312-250-80A

80-96

46 X 86

$39.00

312-250-88AR

88-108+R

46 X 86

$40.00

312-250-108AR

108-130+R

46 X 86

$43.00

312-250-124A

124-149

46 X 86

$44.00

312-250-130A

130-156

46 X 86

$45.00

312-250-145A

145-175

46 X 86

$46.00

312-250-161AR

161-193+R

46 X 86

$49.00

312-250-192AR

192-228+R

46 X 86

$53.00

312-250-200AR

200-240+R

46 X 86

$60.00

312-250-233A

233-280

56 X 86

$75.00

312-250-270A

270-324

53 X 111

$80.00

312-250-324A

324-389

65 X 111

$95.00

312-250-340A

340-408

65x111

$98.00

312-250-378A

378-454

65 X 111

$101.00

312-250-400A

400-480

53x111

$105.00

312-250-430A

430-516

65 X 111

$112.00

+R=includes dump resister Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

434

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Start Capacitors MiniBlaze & Blazemaster - Loncin Engine Capacitors Accessories

PARTS

330V MFD

Dimensions diameter x length (mm)

Code

312-330-30AR

30-36+R

37 X 86

$27.00

312-330-40AR

40-48+R

37 X 86

$32.00

312-330-47AR

47-56+R

46 X 86

$40.00

Part No.

Price

312-330-64AR

64-77+R

46 X 86

$43.00

312-330-80AR

80-96+R

46 X 86

$51.00

312-330-88AR

88-108+R

46 X 86

$57.00

312-330-108AR

108+130

46 X 86

$58.00

312-330-120AR

120-144+R

53 X 111

$72.00

312-330-130A

130-156+R

53 X 111

$75.00

312-330-161AR

161-193+R

53 X 111

$77.00

312-330-216AR

216-259+R

65 X 111

$98.00

312-330-270AR

270-324+R

46 X 111

$105.00

Code

Price

START CAPACITOR MOUNTING BRACKET Part No.

Size mm

312-25MB086

86mm

Fits 70mm length

$8.00

312-25MB102

102mm

Fits 86mm length

$9.00

312-25MB127

127mm

Fits 111mm length

$10.00

Size mm

Code

Price

312-25EC37

37mm

$6.00

312-25EC46

46mm

$8.00

312-25EC53

53mm

$9.00

Size mm

Code

Price

$1.50

312-45C350

$1.50

312-45C400

$1.75

312-45C450

$1.75

312-45C500

$2.25

312-45C550

$2.25

Code

Price

$0.95

Code

Price

START CAPACITOR END CAP Part No.

RUN CAPACITOR PVC INSULATOR COVER CAPS Part No.

312-45C300

RUN CAPACITOR M8 MOUNT STUD Part No.

312-45M080

Size mm

8mm

To fit Icar capacitors

RUN CAPACITOR ALUMINIUM ANGLE BRACKET Part No.

Size mm

312-45AB30

30mm

To fit Icar capacitors

$0.80

312-45AB35

35mm

To fit Icar capacitors

$0.80

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

435

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Run Capacitors - Spade Terminal MiniBlaze & Blazemaster - Loncin Engine

PARTS

ICAR – RUN CAPACITOR – 450V Part No.

MFD

Dimensions Diameter x length (mm)

Pack Size

Code

Price

Pack Price Ea/unit

312-450-010ML

1.0

30 X 51

$9.00

312-450-015ML

1.5

30 X 51

$9.50

312-450-020ML

2.0

30 X 51

$9.50

$8.00

312-450-025ML

2.5

30 X 51

$9.75

312-450-030ML

3.0

30 X 51

$9.70

$9.75

312-450-040WB

4.0

30 X 51

$10.00

$8.50

312-450-050WB

5.0

30 X 51

$10.00

$8.50

312-450-060ML

6.0

30 X 71

$10.50

312-450-063WB

6.3

30 X 71

$10.50

312-450-070WB

7.0

30 X 71

$11.00

$9.00

312-450-075WB

7.5

30 X 71

$11.50

312-450-080WB

8.0

30 X 71

$12.00

$9.50

312-450-100WB

10.0

30 X 71

$13.00

$11.00

312-450-120WB

12.0

35 X 71

$13.50

$11.50

312-450-125WB

12.5

35 X 71

$13.50

$11.50

312-450-140WB

14.0

40 X 71

$14.00

$12.00

312-450-150WB

15.0

35 X 71

$14.50

$12.50

312-450-160WB

16.0

35 X 71

$15.00

$13.00

312-450-180WB

18.0

40 X 71

$16.00

$14.00

312-450-200WB

20.0

40 X 71

$17.00

$15.00

312-450-200ML

20.0

45 X 71

$24.00

312-450-220WB

22.0

40 X 71

$19.00

$17.00

312-450-220ML

22.0

45 X 71

$24.00

312-450-250WB

25.0

45 X 71

$20.00

$17.00

312-450-250ML

25.0

45 X 91

$27.00

312-450-300WB

30.0

45 X 71

$21.00

$18.00

312-450-300ML

30.0

45 X 91

$28.00

312-450-315WB

31.5

45 X 92

$29.00

312-450-350WB

35.0

45 X 91

$24.00

$20.50

312-450-350ML

35.0

45 X 116

$35.00

312-450-400WB

40.0

45 X 91

$28.00

$23.00

312-450-400ML

40.0

45 X 116

$40.00

312-450-450WB

45.0

45 X 91

$29.00

$25.00

312-450-450ML

45.0

50 X 116

$42.00

312-450-500WB

50.0

45 X 116

$38.00

$33.00

$43.00

312-450-500ML

50.0

50 X 116

312-450-550WB

55.0

45 X 116

$35.00

$31.00

312-450-550ML

55.0

55 X 116

$48.00

312-450-600WB

60.0

45 X 116

$42.00

$36.00

312-450-650WB

65.0

50 X 116

$45.00

312-450-700WB

70.0

50 X 116

$54.00

312-450-750WB

75.0

50 X 116

$57.00

312-450-800WB

80.0

55 X 116

$58.00

Note: Length dimension does not include lugs Specifications – WB = 400v (10,000 hrs) 450v (3000 hrs) – ML = 400v (30,000hrs) 450v (10,000hrs) -25°C – +85°C operating temperature

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

436

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Run Capacitors - Lead - Loncin Engine MiniBlaze & Blazemaster

PARTS

RUN CAPACITORS WITH LEAD Part No.

MFD

TYPE

Size

Code

List Price

TYPE A

312-450-02A

25 x 51

$13.00

312-450-03A

25 x 51

$14.00

312-450-04A

30 x 51

$14.00

312-450-05A

30 x 71

$15.00

312-450-06A

30 x 71

$15.00

312-450-08A

30 x 71

$16.00

312-450-10A

30 x 71

$16.00

312-450-12A

35 x 71

$19.00

312-450-14A

40 x 71

$19.00

312-450-15A

35 x 71

$20.00

312-450-16A

35 x 71

$21.00

312-450-18A

40 x 71

$21.00

312-450-20A

40 x 71

$24.00

312-450-25A

45 x 71

$25.00

312-450-30A

45 x 71

$28.00

312-450-32A

45 x 91

$29.00

312-450-35A

45 x 91

$29.00

312-450-40A

45 x 91

$35.00

312-450-45A

45 x 117

$39.00

312-450-50A

45 x 116

$41.00

312-450-55A

45 x 116

$45.00

312-450-60A

45 x 116

$47.00

312-450-80A

55 x 116

$59.00

A Type

TYPE B

312-450-015B

1.5

25 x 51

$13.00

312-450-02B

25 x 51

$13.00

312-450-025B

2.5

25 x 51

$13.00

312-450-03B

25 x 51

$14.00

312-450-04B

30 x 51

$14.00

312-450-05B

30 x 71

$14.00

312-450-06B

30 x 51

$15.00

312-CDI-CB08

A/Tronics

35 x 51

$15.00

312-450-08B

30 x 71

$15.00

312-450-10B

30 x 71

$16.00

312-CDI-CB10

A/Tronics

35 x 51

$17.00

312-450-125BB

12.5

35 x 71

$19.00

312-450-14B

35 x 71

$19.00

312-450-15B

40 x 71

$19.00

312-450-16B

35 x 71

$21.00

312-450-18B

40 x 71

$21.00

312-450-20B

40 x 71

$21.00

312-450-25B

45 x 71

$26.00

312-FC-25L

Ducati

40 x 67

$41.00

312-450-30B

45 x 71

$26.00

31.5

45 x 92

$29.00

312-450-32B

40 x 91

$26.00

312-450-35B

45 x 91

$29.00

312-450-40B

45 x 91

$35.00

312-450-45B

45 x 117

$39.00

312-450-60B

45 x 116

$47.00

312-CDI CB31.5

B Type

• Only capacitors with 312-450 code can be stud mounted. See page 413 for capacitor accessories

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

437

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Run Capacitors - Square Flying Lead MiniBlaze & Blazemaster - Loncin Engine Run Capacitors - Can

PARTS

RUN CAPACITORS SQUARE FLYING LEADS MFD

Size

Code

List Price

312-450-010SQ

Part No.

37x13x24

$5.00

312-450-020SQ

37x13x24

$6.00

312-450-030SQ

38x20x32

$8.00

312-450-040SQ

38x20x32

$9.00

312-450-050SQ

48x22x34

$10.00

312-450-060SQ

48x22x34

$11.00

312-450-080SQ

48x26x38

$12.50

312-450-100SQ

60x24x38

$13.00

List Price

RUN CAPACITORS METAL CAN MFD

Size

Code

312-451-020

Part No.

40 x 55

$5.00

312-451-040

40 x 55

$6.50

312-451-060

40 x 55

$8.00

312-451-080

40 x 56

$8.50

312-451-100

40 x 66.5

$11.00

312-451-125

12.5

40 x 65

$12.00

312-451-150

45 x 65.5

$14.50

312-451-200

45 x 76

$16.50

312-451-250

45 x 76

$19.00

312-451-300

50 x 76

$20.00

312-451-350

50 x 85

$22.00

312-451-400

50 x 85

$26.00

312-451-450

50 x 100

$32.00

312-451-500

50 x 100

$36.00

312-451-550

50 x 125

$39.00

312-451-600

50 x 125

$42.00

Metal can type motor run capacitors are vegetable oil filled with an self-healing aluminium case. They are designed for continuous operation in wide range of applications with temperature range from -40 to +80 degrees in 50/60Hz. Applications include pumps, electric motors, air conditioning. n n n n

Capacitance +/- 5% Rated voltage up to 440v Frequency 50/60Hz Push on quick connect terminals Note: Length dimension does not include lugs RUN CAPACITORS P2 SAFETY METAL CAN TYPE Part No.

MFD

Size

Code

List Price

312-450-020ML-P2

30 X 63

$18.00

312-450-040ML-P2

30 X 63

$19.00

312-450-050ML-P2

30 X 78

$20.00

312-450-060ML-P2

30 X 78

$21.00

312-450-080ML-P2

35 X 78

$22.00

312-450-100ML-P2

35 X 78

$23.00

312-450-120ML-P2

35 X 103

$24.00

312-450-150ML-P2

35 X 103

$25.00

312-450-200ML-P2

40 X 103

$28.00

312-450-250ML-P2

45 X 128

$34.00

312-450-300ML-P2

45 X 128

$37.00

312-450-350ML-P2

45 X 128

$45.00

312-450-400ML-P2

55 X 128

$50.00

312-450-500ML-P2

55 X 128

$55.00

Metal can P2 type Safety motor run capacitors have a self-healing aluminium case with over pressure safety disconnector to prevent damage. • Only capacitors with 312-450 code can be stud mounted. See Page 379 Capacitor Accessories Section. Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

438

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Ball Bearings MiniBlaze & Blazemaster - Loncin Engine

PARTS

NSK BALL BEARING Dimension

Code

List Price x1

$11.00

$12.00

$13.00

$10.00

$11.00

313-629VV

$12.00

313-6000VV

$10.00

313-6001VV

$11.00

313-6002VV

$12.00

313-6003VV

$14.00

313-6004VV

$16.00

313-6005VV

$19.00

313-6006VV

$23.00

313-6200VV

$12.00

Part No.

313-607VV

313-608VV

313-609VV

313-626VV 313-627VV

313-6201VV

$13.00

313-6202VV

$13.00

313-6203VV

$14.00

313-6204VV

$16.00

313-6205VV

$20.00

313-6206VV

$27.00

313-6207VV

$50.00

313-6208VV

$60.00

313-6209VV

$80.00

313-6300VV

$12.00

313-6301VV

$13.00

313-6302VV

$15.00

313-6303VV

$17.00

313-6304VV

$19.00

313-6305VV

$28.00

313-6306VV

$40.00

313-6307VV

$55.00

313-6308VV

$65.00

313-6309VV

100

$92.00

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

439

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Taper Bush MiniBlaze & Blazemaster - Loncin Engine V-Grooved Pulley

PARTS

TAPER BUSH Part No.

Series

Available Sizes (mm)

Available Sizes (inch)

Code

List Price

314-TLB1108

1108

from 10mm to 28mm

from 3/8” to 1 1/8”

$25.00

314-TLB1210

1210

from 11mm to 32mm

from 1/2” to 1 1/4”

$30.00

314-TLB1610

1610

from 14mm to 42mm

from 1/2” to 1 5/8”

$35.00

V-GROOVED PULLEY SPA/13 Number of Grooves

PCD mm

Taper Lock Bush require

Code

List Price

314-TLSPA67.1

Part No.

1108

$30.00

314-TLSPA67.2

1108

$35.00

314-TLSPA71.1

1108

$30.00

314-TLSPA71.2

1108

$35,00

314-TLSPA75.1

1108

$30.00

314-TLSPA75.2

1108

$35.00

314-TLSPA80.1

1210

$35.00

314-TLSPA80.2

1210

$38.00

314-TLSPA85.1

1210

$35.00

314-TLSPA85.2

1210

$38.00

314-TLSPA90.1

1210

$35.00

314-TLSPA90.2

1610

$40.00

314-TLSPA95.1

1210

$35.00

314-TLSPA95.2

1610

$45.00

314-TLSPA100.1

100

1610

$40.00

314-TLSPA100.2

100

1610

$50.00

314-TLSPA106.1

106

1610

$45.00

314-TLSPA106.2

106

1610

$60.00

314-TLSPA112.1

112

1610

$45.00

314-TLSPA112.2

112

1610

$60.00

314-TLSPA118.1

118

1610

$50.00

314-TLSPA118.2

118

1610

$65.00

314-TLSPA125.1

125

1610

$60.00

314-TLSPA125.2

125

1610

$75.00

Pulleys are available with PCD’s from 67 - 125mm and to suit SPA section (13mm) belts in either single or dual grove. With bores to suit 1108, 1210 or 1610 taper lock bushes they are fast and simple to install or remove. Pulleys to suit other PCD’s or belt types are available on request.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

440

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Seals - Type 16 MiniBlaze & Blazemaster - Loncin Engine

PARTS

TYPE 16 MECHANICAL SEAL Part No.

Code

List Price 1+ Each

6.3

$23.00

$17.00

$51.00

$20.00

$23.50

$23.00

Silicon/Silicon

$39.00

Viton

$45.00

Size (D)

410-88208

3/8

22.2

13.7

410-88211

1/2

25.4

18.3

410-88211V

1/2

25.4

18.3

410-88214

5/8

32.2

18.3

10.3

Remarks

Viton

410-88214A

5/8

30.4

18.3

8.5

410-88214C

5/8

31.7

18.3

7.8

410-88214D

5/8

410-88214V

5/8

31.75

18.3

10.3

410-88215

3/4

34.95

18.3

10.3

$18.00

410-88215PC

3/4

34.95

18.3

10.3

Pure Carbon

$55.00

410-88215SS

3/4

34.95

18.3

10.3

316 Stainless steel

$56.00

410-88215V

3/4

34.95

18.3

10.3

Viton

$67.00

410-88216

3/4

Conversion Kit

$66.00

410-88230

41.3

410-88230A

410-88231

20.7

Starite

11 Conversion Kit

$50.00

$89.00

$115.00

List Price 6+ Each

$14.45

$10.80

Carbon/Nitrile – Max Temp 80°C (Viton Seals available on request) (For Non-water Applications Contact Argon Distributors) *Refer to pages 425-429 for seal selection chart

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

441

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Seals - Type 68 MiniBlaze & Blazemaster - Loncin Engine

PARTS

TYPE 68 MECHANICAL SEAL Part No.

Size (D)

410-88210

1/2"

28.6

25.4

6.4

410-88210A

1/2"

25.2

5.3

410-88226

5/8"

36.5

31.8

10.3

410-88226A

5/8"

10.3

410-88226C

5/8"

410-88232

1/2"

410-88232A

1/2"

25.4

6.4

33.3

Remarks

Code

List Price 1+ Each

List Price 6+ Each

$26.00

$20.50

$34.00

$27.00

$34.00

$70.00

With Rubber Boot

With Rubber Boot No Stationary

$35.00

$48.00

410-88235

3/4"

10.3

$33.00

410-88235SS

3/4"

10.3

316 S/S

$48.00

410-88235V

3/4"

10.3

Viton

$70.00

410-88605RB

3/4"

35.4

4.9

With Rubber Boot

$77.00

$22.50

$19.80

Carbon/Nitrile – Max Temp 80°C *Refer to pages 425-429 for seal selection chart

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

442

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Seals - Type 55 MiniBlaze & Blazemaster - Loncin Engine

PARTS

TYPE 55 MECHANICAL SEAL Part No.

Size (D)

410-80020

1/2"

25.4

410-80058

5/8"

31.7

Remarks

Code

List Price

$23.00

10.3

$20.00

410-84752

12MM

7.7

$21.00

410-84752A

12MM

$21.00

410-84752KE

12MM

7.7

$45.00

Knife Edge

410-84752V

12MM

7.7

$82.00

410-84753

13MM

$30.00

$45.00

410-84753A

13MM

5.5

410-84753KE

13MM

410-84754

14MM

28.5

$45.00

410-84754A

14MM

24.6

7.8

$45.00

410-84754C

14MM

5.5

$45.00

410-84754D

14MM

29.6

$45.00

Knife Edge

410-84754E

14MM

7.5

$65.00

410-84755

15MM

29.5

$35.00

410-84756

16MM

29.5

$60.00

410-84757

17MM

$70.00

410-84758

18MM

42.3

$72.00

410-84759A

19MM

$73.00

410-84760

20MM

$78.00

7.8

410-84760A

20MM

$85.00

410-84762

24MM

No Seat

$70.00

410-84763

25MM

No Seat

$98.00

410-84765

28MM

No Seat

$100.00

410-84766

30MM

No Seat

*Refer to pages 425-429 for seal selection chart

POA

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

443

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Seals - Type 21 MiniBlaze & Blazemaster - Loncin Engine

PARTS

TYPE 21 MECHANICAL SEAL Part No.

410-85504 410-85505 410-85506 410-85506M 410-85507 410-85508 410-85508D 410-85508W 410-85509 410-85509A 410-85510 410-85511 410-85512 410-85513 410-85514 410-85515 410-85516 410-85517 410-85518 410-85519 410-85554 410-85555 410-85555A 410-85556 410-85558 410-85558A 410-85560 410-85560A 410-85562 410-85562D 410-85563 410-85565 410-85566 410-85566B 410-85567 410-85567B 410-85568 410-85569 410-85570 410-85570A 410-85571 410-85573 410-85574 410-85575 410-85576 410-85577 410-85579 410-85580 410-85581 410-85582

Size (D)

1/2" 5/8" 3/4" 3/4" 7/8" 1" 1" 1" 1 1/8" 1 1/8" 1 1/4" 1 3/8" 1 1/2" 1 5/8" 1 3/4" 1 7/8" 2" 2 1/8" 2 1/4" 2 3/8" 14MM 15MM 15MM 16MM 18MM 18MM 20MM 20MM 24MM 24MM 25MM 28MM 30MM 30MM 32MM 32MM 33MM 35MM 38MM 38MM 40MM 43MM 44MM 45MM 48MM 50MM 53MM 55MM 58MM 60MM

25.4 31.75 34.95 37.8 38.1 41.3 40 44.45 44.45 47.65 50.8 50.8 54.1 60.3 63.5 66.65 69.85 76.2 79.4 82.55 30 32 29.5 32 33 35 35 38.1 39 41.3 40 43 45 50 48 50.8 48 50 56 54.1 58 61

22.2 22.2 22.2 22.2 24 25.4 25.4 25.4 27 27 27 28.5 28.5 32 35 38 38 43 43 46 22 22 22 22 27.2 27.2 27.2 27.2 29 29 29 31.5 31.5 31.5 31.5 31.5 31.5 31.5 34

8 10.3 10.3

11 11 11 11 11 12.7 12.7 12.7 12.7 14.3 14.3 14.3 4 10 7.4 10 10.3 8 10.3 10.3 11 11 11 11 11 11 11 11 11 11 11

32.3 32.3

12.7 12.7

63 66 70 73 75 78 80

32.3 32.3 34.8 33.8 33.3 38.3 38.3

12.7 12.7 12.7 14.2 14.2 14.2 14.2

Remarks

10.3 11 11

Code

List Price

A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A

$37.00 $39.00 $46.00 $57.00 $52.00 $60.00 $60.00 $70.00 $95.00 $160.00 $112.00 $125.00 $155.00 $170.00 $180.00 $305.00 $315.00 $325.00 $335.00 $345.00 $48.00 $51.00 $51.00 $54.00 $58.00 $80.00 $68.00 $72.00 $78.00 $78.00 $105.00 $115.00 $116.00 $155.00 $124.00 $235.00 $129.00 $131.00 $145.00 $145.00 $165.00 $195.00 $210.00 $245.00 $265.00 $305.00 $315.00 $365.00 $385.00 $395.00

*Refer to pages 425-429 for seal selection chart

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

444

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Seals - Type R3 MiniBlaze & Blazemaster - Loncin Engine

PARTS

TYPE R3 MECHANICAL SEAL Part No.

Size (D)

410-86712

20.6

5.5

410-86712A

23.5

8.0

410-86712DPL

7.8

410-86713

410-86714

23.1

8.3

410-86715

26.9

8.1

Remarks

Code

List Price

$26.00

Left Hand spring

$43.00

$60.00

$30.00

$31.00

410-86715KE

26.9

8.1

Knife Edge

$52.00

410-86715V

26.9

8.1

Viton

$57.00

410-86716

26.9

8.2

$36.00

410-86717

26.9

8.2

$38.00

410-86718

30.9

$37.00

30.9

$69.00

$45.00

$50.00

$53.00

$64.00

$69.00

$68.00

$74.00

$85.00

$95.00

$120.00

$125.00

410-86718KE

410-86719

410-86720

30.9

410-86720A

34.3

12.5

410-86722

35.4

9.5

410-86722A

12.7

410-86724

35.4

9.5

410-86724A

12.5

410-86725

38.2

10.1

410-86728

43.3

410-86730

43.3

410-86730A

Knife Edge

DIN DIN DIN

9 DIN

*Refer to pages 425-429 for seal selection chart

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

445

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Mechanical Type 89- Loncin Engine MiniBlaze & Seal Blazemaster

PARTS

TYPE 89 MECHANICAL SEAL

SPECIFICATIONS

MATERIAL OPTIONS Full Vacuum to 10 Bar

Metals

316 SS, 2205

Temperature

-35°C to 205°C

Faces

SS, Carbon, Tungsten, SiC

Shaft Speed

To 10m/s

Pressure

Nitrile, Viton, Neoprene, EPDM

Elastomers

Standard carbon/nitrile Part No.

Size – D

410-89502

0.750”

18.0

410-89503

0.875” pdc

410-89522

25mm pdc

Code

List Price

33.3

$70.00

20.5

36.5

$105.00

22.0

39.0

$115.00

41.0

Pdc=pin driven spring. *Refer to pages 425-429 for seal selection chart

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

446

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Argon Replacement Seal -Selection MiniBlaze & Blazemaster Loncin Engine

PARTS

Note: This chart is intended for reference guide only. ARGON DISTRIBUTORS REPLACEMENT SEAL SELECTION CHART Model

Part No

Seal Data

Argon Replacement

Size

Type

Part No

Ajax 3LS 4LS

1 7/16 1 3/4

T1000 T21/St

410-124698 410-124701

Alfa Laval (Finsbury / Calpeda) CA NM

3/4 32mm

T68 R3

410-88236 410-86732

American Products Ultraflo

5/8

T68

410-88226

Aquaflo XP-2, Circmaster

5/8

T16

410-88214

12mm 15mm

T55 T21

410-85553 410-85555J

Areta (also see Sealand) JexiJR-5 JexjJR-10

APR Series SMA and SPA Series Alba Jet ODS20 CDP Series

349-LSJ054 349-LSJ104

5/8 5/8 1/2 12mm 16mm

T68 T68 T55 T55 T21

36/200T 100M/16 100M/16 36/200T 100M/16 36/200T 200M/6 100M/16 41M/16 41M/16

15mm 13mm 13mm 17mm 13mm 15mm 13mm 25mm 22mm 15mm 15mm 22mm 15mm 22mm 17mm 15mm 12mm 12mm

R3 T55 T55 R3 T55 R3 T55 R3 R3 R3 R3 R3 R3 R3 R3 R3 T55 T55

410-86715 410-84753 410-84753 410-86717 410-84753 410-86715 410-84753 410-86725A 410-86722 410-86715 410-86715 410-86722 410-86715 410-86722 410-86717 410-86715 410-84752 410-84752

47863 49021 48802SP 48802SP 49021 47863 47863 47863 30736 47863 48801SP 40101 48801SP 40101 48801SP 40101 48801SP 40101 48801SP 40101 48802SP 48800SP 47863

5/8 16mm 1/2 1/2 16mm 5/8 5/8 5/8 1/2 5/8 5/8 3/4 5/8 3/4 5/8 3/4 5/8 3/4 5/8 3/4 1/2 1" 5/8

T68 T21 SIC T16 T16 T21 SIC T68 T68 T68 T68 T68 T16 T16 T16 T16 T16 T16 T16 T16 T16 T16 T16 T16 T68

49021 48802SP 49021 48800SP 48801SP SB16 47863

16mm 1/2 16mm 1" 5/8 5/8" 5/8

T21 SIC T16 T21 SIC T16 T16 T68 w/boot T68

30736 ME8000074580

1/2 15mm

T68 T55

410-88226* 410-88214D 410-88211* 410-88211* 410-88214D 410-88226* 410-88226* 410-88226* 410-88210A 410-88226* 410-88214* 410-88215* 410-88214* 410-88215* 410-88214* 410-88215* 410-88214* 410-88215* 410-88214* 410-88215* 410-88211* 410-88230 * 410-88226* 410-80020 410-88214D 410-88211* 410-88214D 410-88230 * 410-88214* 410-88226C 410-88226* 410-88210C 410-88210A 410-84755

340-ALBA-SEAL 349-CDP121204

DAB DP100,151, Jet 61,81,82M Jet100,151,251 Jet 200,300, Jetinox 90,110, K12/200,K14/400 K20/41, K20/1200 K18/500,K28/500, K30/70,K30/100,K35/40, K36/100 K36/200,K40/200,K55/200 K45/50,K55/50 K55/100,K66/100,K90/100 KH25/80,KH30/90 KH35/100,KH40/100 KP30/16-6 Nova 41, Davey 62501 to 62701-3 62701-4 Aqua-mate 350,450 Celsior Bath Pumps, HP Series CR Series (Power Chief) Dynaflo 60061R2, 62001-3 Dynaflo 62101S-0,62201-0 - 62303-3 Dynaflo101-3,103-1, Dynajet Dynaprime 64101,2 Engine Drive 93104-93116 Engine Drive 93117 Engine Drive 93124 Engine Drive 93126 Engine Drive 93134,93164 Engine Drive 93206 - 93234 Engine Drive 93254E Engine Drive 93264, 9385D Engine Drive 93860 Engine Drive 93870 HP Series Mukmova Pool Pump 100 to 300. Power Ace 100,150,200 ( -0) Power Ace 100,150,200 ( -1,-2) Power Chief 85,105,135 Power Master Prime Jet 200-240 Prime Jet 90-150 QB Series Shallow/Deep Well 095S1,125S1,165S3/D3 etc Solar Prime Series Thermajet Spa Pumps Whisper Pool Pump

100M/16 61M/16 61M/16 200M/6 61M/16 100M/16 61M/16

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

447

410-88226C 410-88226C 410-84752AV

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Argon Replacement Seal -Selection MiniBlaze & Blazemaster Loncin Engine

PARTS

Note: This chart is intended for reference guide only. ARGON DISTRIBUTORS REPLACEMENT SEAL SELECTION CHART Model

Part No

XA85,105,135, XB Series 201,301/ -1,-2 XB Series 73101,to 401 XB Series 75101 XD, XF, XP Series, XJ Series XS Series Spa Pumps Davies DJS 80 Seal DJS 100/120 Seal JET Series up to 1.2Hp JET Series 2.0 - 3.0Hp JB Series JAP Series up to 1.0Hp JAP Series up to 1.5 - 2.0Hp DHM Series ULTRA Series

48802SP 49021 48802SP 49021 48802SP 30736 48802SP 345-D310027 345-D310022 345-D310011 345-D310012 345-D310013 345-D310011 345-D310013 345-D310080

Seal Data

Argon Replacement

Size 1/2 16mm 1/2 16mm 1/2 1/2 1/2

Type T16 T21 SIC T16 T21 SIC T16 T68 T16

Part No 410-88211* 410-88214D 410-88211* 410-88214D 410-88211* 410-88210A 410-88211*

12mm 15mm 13mm 15mm 18mm 13mm 18mm 12mm 15mm

T55 T16 T55 R3 R3 T55 R3

410-84753 410-86715 410-86718 410-84753 410-86718

16mm 12mm

G12 T94

T55

410-84754E

12mm 13mm 15mm 18mm 24mm 13mm 15mm 18mm 18mm 13mm 18mm 18mm 20mm 20mm 24mm 30mm 32mm 1" 12mm 15mm 20mm 15mm

T55 T55 R3 R3 R3 T55 R3 R3 R3 T55 R3 R3 R3 R3 R3 R3 T55 T55 T16 T16 T16 T16

410-84752 410-84753 410-86715 410-86718 410-86724A 410-84753 410-86715 410-86718 410-86718 410-84753 410-86718 410-86718 410-86720A 410-86720A 410-86724A 410-86730A 410-84767 410-84764

DB 50-26

1/2 3/4 3/4 1" 1 1/4" 1 1/4" 1.5" 3/4 1" 3/4 1 1/4" 3/4 32mm

24mm

T68 Romet T16 T16 Conv Kit T16 Conv Kit T21 T21 Kit T21 T16 T16 Conv Kit T16 T21 T16 T21

410-88232 410-88215 410-88216 410-88231 410-85510 410-85510C 410-85512 410-88215 410-88231 410-88215 410-85510 410-88215 410-85567

Calpeda MPC MXA, MXP NGX NM11/A NM25/160A, NM40/16A-B NM40/20A-AR,NM50/16A-B NM65/16D-E NMD2/110

14mm 14mm 12mm 20mm 18mm 24mm 32mm 32mm 14mm

T55 T55 T55 R3 R3 R3 R3 R3 R3

410-84754 410-84754 410-84752 410-86720 410-86718 410-86724 410-86732 410-86732 410-86714

Foras (See Pentax) Ebara 3M,3M4,3S, 3PF CD,CDX, 2CDX DWO JE, JEX,,

22mm 15mm 18mm 15mm

R3 R3 R3 R3

410-86722A 410-86715 410-86718A 410-86715

DMI Series Old DMI Series New MVI Series 1-5 MVI Series 10-20 PL/OD/PM Series K Series up to 1.2Hp K Series 1.5Hp K Series 2.0-3.0Hp K Series 4.0Hp KA Series up to 1.2Hp KA Series 1.5-2.0Hp KC Series KD Series KP Series up to 1.2Hp KP Series up to 1.5-3.0Hp KL Series BK Series CN Series up to 5.5Hp CN Series 7.5-10Hp CN Series 12.5-15Hp SPO Series SPR Series CRD 1-030 / CKD 050 CRD Series / CKD 100 CKD Series 1.5-4.0Hp CRT Series

345-D310070 345-D310088 345-D310066 345-D310072 345-D310014 345-D310011 345-D310012 345-D310013 345-D310002 345-D310011 345-D310012 345-D310013 345-D310013 345-D310011 345-D310013 345-D310013 345-D310000 345-D310000 345-D310002 345-D310001 345-D310021 345-D310022 345-D310024 345-D310022

Davies Classic K1/6, K1/3 (Brass Wear face on Impella) K1/6, K1/3, K3/4, K1 1/4, K2, K3, K3/4, K1 1/4 (Early Type conversion Kit) K2, K3, K5,(Early Type conversion Kit) K5 K5 (New motor conversion kit) MK1- MK2 K10, K15, M5 KH5 KH7.5 M3/4 to M2 M3,M4, MH2 SP Series DB 100-26

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

D142506 700270 D142832 D142603 D142867 D142646 700270 700270 D142603 700270

448

T21

410-85562

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Argon Replacement Seal -Selection MiniBlaze & Blazemaster Loncin Engine

PARTS

Note: This chart is intended for reference guide only. ARGON DISTRIBUTORS REPLACEMENT SEAL SELECTION CHART Model

Part No

Part No 410-84752 410-86722A 410-86730A 410-86722A

3/4

T68

410-88235

7/8 25mm

T89 T89

410-89503 410-89522

3/4 3/4

T16 T16

410-88215 410-88215

12mm 12mm 12mm 12mm 12mm 16mm 16mm 22mm 12mm 13mm 15mm 16mm 12mm

T1100 T36A T36A T36A T36A T36A T36A G1 R3 T55 R3 T36A R3

410-83812 410-83712 410-83712 410-83712 410-83712 410-83716 410-83716 410-86712A 410-84753 410-86715 410-83716 410-86712A

1/2 3/4

T68 T68

410-88210 410-88605

11516121401

14mm

T55

410-84754

22.283.41/289.41 22-312-05 22-312-05 22.314.85 22-282-63/61 22.283.41/289.41 22.284.40/290.40 22.285.42/291.42 22.322.04 22.322.00 22-312-05

20mm 12mm 12mm 14mm 16mm 20mm 22mm 30mm 22mm 22mm 12mm

R3 R3 R3 R3 R3 R3 R3 R3 R3 R3 R3

410-86720A 410-86712 410-86712 410-86714L 410-86716 410-86720A 410-86722A 410-86730A 410-86722A 410-86722A 410-86712

700273K 700270 700270 700273K 700270 700274 700270 702789 702789 700270 700270 700270 702789 700270 707022 700273K 800624K 800917K 700273K 700270 700273K 800597 700270 700270 700273K 702789 800597 800597

3/8 3/4 3/4 3/8 3/4 1" 3/4 1/2 1/2 3/4 3/4 3/4 1/2 3/4 14mm 3/8

T16 T16 T16 T16 T16 T16 T16 T16 T16 T16 T16 T16 T16 T16 T21 T16

3/4 3/8 3/4 3/8 12mm 3/4 3/4 3/8 1/2 11mm 11mm

T68/B T16 T16 T16 T55 T16 T16 T16 T16 T55 T55

410-88208 * 410-88215 * 410-88215 * 410-88208 * 410-88215 * 410-88230 410-88215 * 410-88211 * 410-88211 * 410-88215 * 410-88215 * 410-88215 * 410-88211 * 410-88215 * 410-85554T 410-88208 * 345-800624K 410-88605RB 410-88208 * 410-88215 * 410-88208 * 410-84752A* 410-88215 * 410-88215 * 410-88208 * 410-88211 * 410-84751A* 410-84751A*

Espa Flipper Flomax FX30 FX50

CP2,CP4 CP37

Filtermaster FM, FX series SB 20, 30

Lowara 2CNF BG C - Series (early model), CEA/CEAM - Series C - Series Twin Impella CN up to 4Kw CN Series 5.5Kw - 7.5Kw CN Series 9.2Kw - 22Kw FCE Series up to 11Kw FHE Series up to 11Kw SG

Argon Replacement Type T55 R3 R3 R3

JES,JESX MD32-125,MD50-160 MD50-200,MD50-250 MD65-125

Grundfos CH2,CH4, CR/CRN2-20 to CR/CRN2-150, CR/CRN2-1800 to CR/CRN2-260, CR/CRN4-20/1 to CR4-160, CR/CRN4-190/1 to CR4-220, CR8,CR16,, CRN8, CRN16 Dairy Blaster JP5, JP6,SPK JPF2,3 JPF4,5,7 LM, NM, SPK Honda WX10 (GX35) WB20 (GX160) Linz JRH-10HX

Seal Data Size 12mm 22mm 30mm 22mm

Onga 100,110,111,120,120-1, 112,112-1,112VX,121,122, 140-148,150-153, 160,161,161-1 166,168, 182-184, 185 186,187, 252, 200 Series Spa Pumps 400 series,4145-1 500 Series, 500-1 Series, 600/900 Series Pool Pumps BR463-465 Pool Pumps BR466,Pool Pumps CSM500VF CR10 GP950 GP960 HJ Series, HM1, HM2,HM10 to HM150 Jetinox JJ0,JJ1,JJ10,JJ20,JJ500,JJ600 JJ600-1 JJ00, JJ500-1 Series JJ400 JM 100,110 JS 100,110, Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

449

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Argon Replacement Seal -Selection MiniBlaze & Blazemaster Loncin Engine

PARTS

Note: This chart is intended for reference guide only. ARGON DISTRIBUTORS REPLACEMENT SEAL SELECTION CHART Model

Part No

Seal Data

Argon Replacement

Size 12mm 1/2 3/4 3/4 3/8 3/4 15mm

Type T55 T16 T16 T16 T16 T16 R3

Part No 410-84752A* 410-88211 * 410-88215 * 410-88215 * 410-88208 * 410-88215 * 410-86715/V

3/4 3/4 3/4 3/4 3/4 1/2 3/4 3/4

T16 T16 T16 T16 T16 T16 T16 T16

13mm 12mm

T55 T55

410-88215 * 410-88215 * 410-88215 * 410-88215 * 410-88215 * 410-88211 * 410-88215 * 410-88215 * 345-801428 410-84753 410-84752A*

12mm

T55

410-84752*

18mm 20mm 24mm 24mm 24mm 18mm 18mm 24mm 18mm 20mm 14mm 18mm 14mm 12mm 12mm 18mm 18mm 14mm 14mm 12mm 18mm 14mm

R3 R3 R3 R3 R3 R3 R3 R3 R3 R3 T55 R3 T55 T55 T55 R3 R3 T55 T55 T55 R3 T55

410-86718 410-86720 410-86724 410-86724 410-86724 410-86718 410-86718 410-86724 410-86718 410-86720 410-84754 410-86718 410-84754 410-84752 410-84752 410-86718 410-86718 410-84754 410-84754 410-84752 410-86718 410-84754

M60400012/13 M60400002/3 M60400010/11 M60400000/36 M60400012/13 M60400014/15 M60400014/15 M60400002/3 M60400002/3 M60400012/13 M60400000/36 M60400010/11

20mm 13mm 15mm 12mm 20mm 28mm 28mm 13mm 13mm 20mm 12mm 15mm

R3 T55 R3 T55 R3 R3 R3 T55 T55 R3 T55 R3

410-86720 410-84753A 410-86715 410-84752 410-86720 410-86728 410-86728 410-84753A 410-84753A 410-86720 410-84752 410-86715

Poolrite Dominator Cougar, , Enduro - EP/SF Series Quietline- PM / SQ Series

22231 22230 22230 22230

5/8 3/4 3/4 3/4

T16 T16 T16 T16

410-88214 410-88215 * 410-88215 * 410-88215 *

Poolquip Para Standard Filtermaster, Paramount, Premier,Power Plus Hustler

3129 3230 3230 3230

1/2 3/4 3/4 3/4

T68 T16 T16 T16

410-88211* 410-88215 * 410-88215 * 410-88215 *

405155018 405301020S 405301012

17mm 18mm 20mm 12mm

T55 R3 T55 T55

410-84757A 410-86718 410-84760 410-84752

JS 120,130, LTP400,550,750 / A / S LTP1100 MA, MC,Series MD10 MP25-65 OCS 401-405 OCS 500-800 OJ1,OJ2,OJ3,OJ20,OJ30 OJ700,OJ800 OJ700-1 OP Series PP38-65 PPP550, PPP750-2 PPP750-1500H Pool Pumps PS25-50, PSJ40 SilentFlo SF550-1500 SF55-65 SMH Series SSH Series TF30

800598 702789 700270 700270 700273K 700270 XR003/XR303 CS0033 700270 700270 700270 700270 700270 702789 700270 700270 801428 RFS0043 (800880K) 800876K RFS0001

Pedrollo 2CP25-160B / 260A 2CP32-200B / 200C 2CP32-210A 2CP40-180A /B/C CP220A CP220B/C/CM CPM170 F32-200C, F40-200A/B HF6A/B/C HF8B HFM4 HFM6B/C JCR10H/M, JCR15H/M JCR1A/B JSW1A/C JSW3AH/L/M, JSW3BH/L/M JSW3CH/L/M NGA1A/B PKM200 PKM60/65/70/90 PQ3000 Pro-NGA Pentax / Foras / Matra 2CB 71-73 CAM,CM(KM)50/75/100 CAB,CM(KM)150/200/300 CM 6 CM32-160, CM40-125, CM32-200, CM40-160 to 40-250 CM50-125 to 250, CM65-125 to 200 INOX JMC, JMRC,JPL, JX MN32-160 PE, PM , TE,TF-JET

Saer BP (Stat 42 x 8.0) CM1,CM1B CMK CMP, Mini Matic

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

450

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Argon Replacement Seal -Selection MiniBlaze & Blazemaster Loncin Engine

PARTS

Note: This chart is intended for reference guide only. ARGON DISTRIBUTORS REPLACEMENT SEAL SELECTION CHART Model CMP76,CMP79, FC20 FC25, IR32,IR40 up to 40-200A IR40-250E etc IR50-200C etc IR80 up to 50-160A KF0,KF1,KF6 M50,Multi, M60-M100, M94-M99, M150, M200,

Part No 405301013 405155012 405301015M 405510020 405551028 405510020 405301012 405301012 405301013 405155018

Southern Cross Starline 50-32-160 Starline 65-50-160 Starline 80-65-160 Starline 100-80-160 Starline 50-32-200 Starline 65-40-200 Starline 80-50-200 Starline 100-65-200 Starline 125-100-200 Starline 65-40-250 Starline 80-50-250 Starline 100-65-250 Starline 125-100-250 Starline 150-125-250 Starline 65-40-315 Starline 80-50-315 Starline 100-65-315 Starline 125-100-315 Starline 150-12-315 Starline 125-80-400 Starline 125-100-400 Starline 150-125-400 SpaNet XS 3C XS 30

Seal Data

Argon Replacement

Size 13mm 12mm 15mm 20mm 28mm 20mm 12mm 12mm 13mm 18mm

Type T55 R3 T55 T21 T21 T21 T55 T55 T55 R3

Part No 410-84753A 410-86712 410-84755 410-85560 410-85565 410-85560 410-84752 410-84752 410-84753A 410-86718

33mm 33mm 33mm 43mm 33mm 33mm 33mm 43mm 43mm 43mm 43mm 43mm 53mm 53mm 43mm 43mm 53mm 53mm 53mm 53mm 53mm 53mm

T21 T21 T21 T21 T21 T21 T21 T21 T21 T21 T21 T21 T21 T21 T21 T21 T21 T21 T21 T21 T21 T21

5/8 5/8

T68 T68

410-88226A 410-88226A

Spa Quip (Davey Spa) Magnum, Maxiflo, Monster Scorpio

Q6524 Q6032

3/4 5/8

T16 T68

410-88215 * 410-88226 *

Speck 50 Series BADU 90 Series

221300

20mm 14mm

T55 T55

410-84761 (Rot) 410-84754A

15mm

MG1

410-89015

5/8 3/4 3/4

T16S T16 T16

410-88214A * 410-88215 * 410-88215 *

19mm

T55

410-84759A

702789 700270

1/2 3/4 14mm 15mm 14mm

T16 T16 T55 CN70 T55

410-88211 * 410-88215 * 410-84754C 410-88888 410-84754D

63026 6340162 6340162 6340162 6340162 6340162 (obsolete)

3/4 3/4 3/4 3/4 3/4 3/4 5/8

T16 T68 T68 T68 T68 T68 T68

410-88215 * 410-88235 * 410-88235 * 410-88235 * 410-88235 * 410-88235 * 410-88226 *

Speroni RSM40/50/60 or GPS-RSM Sic/Sic 27 x 6.6 seat Sta-Rite 5PRA5C,D,E,F Duraglass 5P4R6C,D,E,F,G,H Duraglass II Max-E-Pro 3D,E,F,G,H

SRU109-93SS SRU109-372SS 700270

Tellarini EEM 35S Wallace Hydrojet 35,50,70 (Onga 443-446) Hydrojet 100,130 (Onga 543,544) Maxi - Old Style Maxi 3000/5000 - New Style (Green Motor) Orange Waterco Charger Aquamite, Aquastream, Aquastream E, Solar Delta, Hydrostar, Hydrostar Commercial Hydrostorm, Hydrostorm Plus Portapac , Portapac Elite Supastream, Supatuf, Superflo Demon

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

451

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PARTS

Waterway PF-25, PF-35 Tiny Mite Watkins (Hot Springs) XP-2, Circmaster

Conversion MiniBlaze & Factors Blazemaster - Loncin Engine

319-3100B

Whirlpool LX DH1, TDA 200 TDA200 JA35,JA50 LP Series

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

LXMA-002 LXMA-002 LXMA-002

452

5/8 3/8

T68 T16

410-88226 410-88208

5/8

T16

410-88214

5/8 5/8 5/8 5/8

T16 T68 T68 T68

410-88214W 410-88226C 410-88226C 410-88226C

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PARTS

Conversion MiniBlaze & Factors Blazemaster - Loncin Engine

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

453

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PARTS

Conversion MiniBlaze & Factors Blazemaster - Loncin Engine

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

454

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

Conversion MiniBlaze & Factors Blazemaster - Loncin Engine

PARTS

Galvanised Steel Pipe - Medium

Pipe Friction Loss

Flow Rate lpm gpm 6 1 12 3 18 4 30 7 42 9 54 12 60 13 72 16 84 19 96 21 108 24 120 26 150 33

Galvanised Steel Pipe - Medium Metric (AS1074) Based on Nominal OD 20

0.8 2.7 5.9 15.6 30.0 49.0 60.2 86.1

25 32 40 Friction Loss (*m/100 metres of pipe) 0.3 0.8 0.2 1.8 0.5 0.2 4.7 1.2 0.6 9.0 2.2 1.0 14.5 3.5 1.6 17.8 4.3 2.0 25.4 6.1 2.8 34.3 8.2 3.8 44.5 10.6 4.9 56.2 13.4 6.1 69.2 16.4 7.5 36.3 16.5

Deep Well Offset Table 50

Pump Model OJ700

0.2 0.3 0.5 0.6 0.9 1.1 1.5 1.8 2.3 5.0

OJ800

Inj Model D611 D612 D613 D618 D619 D616 D617 D618 D619 D616 D617

Pipe Size Inch 2 x 11/2 2 x 11/2 2 x 11/2 2 x 11/2 2 x 11/2 2 x 11/2 2 x 11/2 2x2 2x2 2x2 2x2

30 3 2.5 2.5 6 4.5 3 3 3.5 3 2 1.5

Additional Suction Head (m) per Horizontal Offset (m) 60 120 180 240 6 9 12 15 4.5 7.5 10.5 13.5 4.5 7.5 10.5 12 12 18.5 23 26 9 15 18.5 21 6 12 17 20 6 10.5 15 18.5 7.5 13.5 18.5 21 6 10.5 13.5 17 4.5 7.5 10.5 13.5 3 6 9 12

300 17 15 13.5 29 23 23 21 24 18.5 15 13.5

Pipe Friction Loss PVC Pipe Metric (AS1477) Flow Rate lpm gpm 18 4 30 7 42 9 54 12 72 16 96 21 120 26 180 40 240 53 300 66 360 79 420 93 480 106 540 119 600 132 720 158 840 185 960 211 1200 264 1400 317

OD 25mm PN9 PN12

0.88 2.15 3.88 6.05 10.09 16.85 25.13

0.98 2.40 4.34 6.77 11.29 18.87

Class 9 and 12 Based on Nominal ID OD 32mm OD 40mm OD 50mm PN9 PN12 PN9 PN12 PN9 PN12 Friction Loss (*m/100 metres of pipe) 0.15 0.17 0.06 0.29 0.33 0.37 0.42 0.13 0.14 0.70 0.80 0.66 0.77 0.23 0.26 1.27 1.44 1.03 1.19 0.35 0.40 1.98 2.24 1.72 1.98 0.59 0.67 3.29 3.74 2.86 3.30 0.97 1.11 5.49 6.23 4.25 4.90 1.45 1.65 8.17 9.27 8.77 10.12 2.97 3.40 16.89 19.18 14.70 16.98 4.98 5.68 7.43 8.49 10.32 11.78 13.62 15.57 19.82 24.54 29.71

OD 80mm PN9 PN12

0.06 0.09 0.15 0.23 0.46 0.77 1.15 1.60 2.11 2.68 3.31 4.00 5.56 7.35 9.36 14.04

0.06 0.11 0.18 0.26 0.53 0.89 1.32 1.83 2.42 3.07 3.80 4.59 6.39 8.44 10.75 16.13

OD 100mm PN9 PN12

0.07 0.14 0.23 0.34 0.48 0.63 0.80 0.98 1.19 1.65 2.18 2.77 4.15 5.78

0.05 0.08 0.16 0.26 0.39 0.55 0.72 0.91 1.13 1.36 1.89 2.49 3.17 4.75 6.62

Flow rate lpm gpm 18 4 30 7 42 9 54 12 72 16 96 21 120 26 180 40 240 53 300 66 360 79 420 93 480 106 540 119 600 132 720 158 840 185 960 211 1200 264 1400 317

* Alternatively friction loss can be calculated as Feet / 100 Feet of pipe.

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

455

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz

PARTS

Notes MiniBlaze & Blazemaster - Loncin Engine

Prices shown are excluding GST and may change without notice. A freight charge may also apply. E&OE. For catalogue amendments and updates visit website.

456

Free Phone 0508 634 341. Fax 09 634 7417 Email sales@argondistributors.co.nz Website www.argondistributors.co.nz